Vol. 11, No.3 May / June 2018
Rocky Mountain Edition (CO, UT, ID, MT and WY) Lifetime Products Dramatically Increases Its Mold Making Capabilities WIth the Addition of The Mazak FJV-60/120E Productivity Improvements Are So Outstanding That They Ordered Their 2nd 6 Weeks Later!
A2ZManufacturing.com
YES...
WE HAVE THAT! MENTION A2ZM2018
FOR 10% OFF!
DENVER B REAKER & S UPPLY One Of The Nation’s Largest Inventory Of New, Reconditioned And Obsolete!
Circuit Breakers Bus Duct Plugs Motor Controls Motor Starters Transformers Panel Mount Switches
WE SPECIALIZE IN THE TOP BRANDS & CARRY THE HARDTO-FIND ITEMS WE ALSO BUY YOUR USED EQUIPMENT...
WWW.DENVERBREAKER.COM
...And More!
Providing Same Day, Next Day Air Shipments For Emergency Needs!
CALL US TODAY! 855-4UR-BRKR
FLEXIBILITY RELIABILITY PERFORMANCE
| PX-30i ▪ 5-Axis Precision Center ▪ Large Work Envelope ▪ Tool Management & Pallet Scheduling Systems ▪ Rigid Machine Structure
Showrooms and Technical Centers Boston ▪ Charlotte ▪ Chicago ▪ Detroit Los Angeles ▪ Memphis ▪ Phoenix ▪ San Francisco
| JobShop Cell ▪ ▪ ▪ ▪
RoboDrill D21MiB5 + M10iA Robot Payload up to 12 lbs of Parts Robot Reaches Over 3 Feet Alternative Infeed/Outfeed Options: Conveyor, Drawers, Pallet Systems ▪ Customized to Fit Your Needs
| WY-100II ▪ ▪ ▪ ▪ ▪
Multi-Tasking Machining Center Y-Axis on Upper and Lower Turrets Twin Spindles - Fast Cycle Times 48 Tool Stations FANUC 32i-B Control w/ Smart-X HMI
602.437.2220
|
methodsmachine.com
Editors Corner
“Your work is going to fill a large part of your life, and the only way to be truly satisfied is to do what you believe is great work. And the only way to do great work is to love what you do.” — Steve Jobs
Do you love what you are doing in your career? In my long and varied career, I have operated in various roles: a computer programmer, a data center operations manager, a sales person/ marketeer for such tech companies as Motorola, AT&T and Intel, and then publisher/owner of A2Z Manufacturing magazines. Hands down, my passion, my favorite job ever is the one I am doing today. In fact, I’ve been doing it for 14 years now. Finding a job you love is age-old advice. Confucius probably has the best longstanding quote about “do what you love.” His words, “Choose a job you love, and you will never have to work a day in your life,” have been repeated throughout history. Research shows that great work is produced when people focus on doing something others love. ‘The Great Work Study’ showed that 88% of projects that earned awards began with an employee asking, “What difference could I make that other people would love?” The study found that all cases of work being studied shared a single intention—the work was focused on making a difference that someone else would love, instead of the person performing the work. They were focused on the recipient of their work—their customer, their colleague who depends on them, their leader who trusts in them, the community who expects their support, or others who benefit from their work. Researchers Wrzesniewski and Dutton followed a group of hospital cleaners, and found that some of the cleaners experienced their work as a job — as something they did solely for the paycheck — and described it as boring and meaningless. But another group perceived the same work as a calling — and experienced the hours they spent at work as engaging and meaningful. This second group of hospital cleaners did things differently from the first group. They engaged in more interactions with nurses, patients, and visitors, taking it upon themselves to make everyone they came in contact with feel better. Generally, they saw their work in its broader context: They were not merely cleaning the wards and removing the trash, but were contributing to the health of patients and the smooth functioning of the hospital. In an article ‘15 Revealing Signs You Genuinely Love What You Do’ by Jeff Haden, there are some key indicators I wanted to call out because they particularly rang true to me: • You don’t talk about other people; you talk about the cool things other people are doing. “I hear Alex just invested in a startup. What are they working on?” “I can’t believe Sonny and Alyssa won their business back; I’d love to know how they did it.” “Conrad developed a new sales channel. Let’s ask him how we can best leverage that.” When you love your work, you don’t gossip about the personal failings of others.You talk about their successes, because you’re happy for them (which is also also a sign you’re happy with yourself.)
Cover Lifetime Products Dramatically Increases Its Mold Making Capabilities WIth the Addition of The Mazak FJV-60/120E Productivity Improvements Are So Outstanding That They Ordered Their 2nd 6 Weeks Later! Announcements/Releases..........................6-16 Feature Articles...................................1,34-35, 19 Buyers Guide Equipment..........................41-46 Buyers Guide Processes..............................47-53 Card Gallery.................................................41-53 Index Of Advertisers........................................54 Editorial...........................................Throughout
Published by:
A2Z Manufacturing PUBLISHER/EDITOR Linda Daly linda@a2zmanufacturing.com Mail Address: 1538 E La Vieve Lane Tempe, AZ 85284
Telephone: (602) 412-7696 Website: www.a2zManufacturing.com E-mail: Linda@A2ZManufacturing.com
CONTRIBUTORS Kim Carpenter Gene Wirth Hugh Taylor Published bi-monthly to keep precision manufacturers abreast of news and to supply a viable vendor source for the industry. Circulation:The A2Z Manufacturing has compiled and maintains a master list of approximately 6500 people in the Rocky Mountain states actively engaged in the Precision Manufacturing Industry. It has an estimated pass on readership of more than 18,000 people. Advertising Rates, deadlines and mechanical
• You enjoy your time at work.You don’t have to put in time at work and then escape to “life” requirements furnished upon request or you can go to to be happy.You enjoy life and enjoy work.You feel alive and joyful not just at home but also www.azManufacturing.com. at work. When you love your work, it’s a part of your life. All photos and copy become the property of A2Z • You don’t think about retirement, because retirement sounds boring…and a lot less fulfilling. This same article asks you to survey yourself to see how many of the 15 items you responded ‘yes’ to. This will help you to determine whether you need to be doing something else. Work just occupies too much of our lives not to enjoy it. Until next issue, I wish you well, and as always, God bless our troops!
Linda Daly.Publisher A2Z Manufacturing Rocky Mountain •
4•
May / June 2018
Manufacturing.
The Publisher assumes no responsibility for the contents of any advertisement, and all representations are those of the advertiser and not that of the publisher. The Publisher is not liable to any advertiser for any misprints or errors not the fault of the publisher, and in such event, the limit of the publisher's liability shall only be the amount of the publishers charge for such advertising.
Get Twin Spindle Productivity in the New DMP 500/2SP Need to get more parts out the door? Our DMP 500/2SP vertical machining centers features two spindles, two ATCs and a large capacity table, giving you the work of two machines in a compact footprint. When you’re ready for a VMC with twice the productivity at a fraction of the cost, talk to Doosan. Learn more at DOOSANMACHINETOOLS.COM
J.M. Grisley Machine Tools, Inc. www.jmgrisleymachine.com 801.486.7519 Serving Utah, Colorado, Montana, Idaho and Wyoming A2Z Manufacturing Rocky Mountain •
5 May / June
2018
Announcements & Releases Mazak to Spotlight Automation atWestern Region Technology + Education Event Mazak will host its annual Discover More With Mazak™ Event at its Western Technology Center in Gardena, California, June 5 - 8. Attendees of this technology and learning event will sharpen their manufacturing productivity practices while discovering how automation can boost the output of both people and machines on the shop floor.
or a company that should be recognized? Please complete the form below and return it to Candy Davis (cdavis@ntma. org) no later than Aug. 15, 2018, so that your submission may be considered by our review panel.
KNUTH is Celebrating 15Years in the USA with a 5 Year Parts Warranty!
At this event, Mazak will showcase the latest advancements in Multi-Tasking technology and a wide variety of cost-effective automation solutions – from simple to complex – that can enable unmanned operations and increase spindle utilization.The capabilities of 17 of Mazak’s latest machine tools will be in action as application engineers perform a variety of real-life part cutting demonstrations. One of the machines in action will be the VC-500A/5X Vertical Machining Center. With a trunnion-style rotary/tilt table and new 60-tool capacity magazine, the VC-500A/5X allows for the accurate, cost-effective processing of small complex parts via full 5-axis machining while reducing valuable set-up time. In addition, several INTEGREX series machines will demonstrate how advanced Multi-Tasking efficiently produces complex components. More than 10 different robots completing different manufacturing tasks will also be on display. Several machines – including the QUICK TURN 250 Turning Center and the MULTIPLEX 6200 Turning Center with Multi-Tasking capability – will be paired with cost-effective automation systems to demonstrate how easy it is to gain versatility, flexibility and productivity with the right automation solution. The QUICK TURN 250 will feature a prepackaged robotic loading system that maximizes profit potential by enabling unmanned operation, while the duel-spindle, dual-turret MULTIPLEX 6200 will have a gantry loader that speeds loading and unloading. Mazak and several of its Value Inspired Partners (VIPs) will present a series of TEK talks on some of the industry’s hottest trends and techniques. Attendees will learn how SMOOTH TECHNOLOGY, a process-performance platform that is transforming the manufacturing industry, brings unmatched speed, accuracy and functionality to metalworking applications, and discover how easy it is to securely enter the world of IIoT with the Mazak SmartBox. For a complete list of machine tools running live demonstrations, presentation schedules and to register for the West event, visit MazakUSA.com. For more information on Mazak’s products and solutions, visit www.MazakUSA. com or follow us on Twitter and Facebook.
Seeking Nominations For The 2018 NTMA Service Awards This year, the NTMA celebrates 75 years of excellence. Our anniversary year will culminate at our annual Fall Conference, slated for Oct. 23-26, 2018, in Denver, Colorado.At the conference, we will be recognizing those individuals and companies who have made notable contributions to our industry. Do you know an individual A2Z Manufacturing Rocky Mountain •
6 • May / June
2018
KNUTH Machine Tools USA, Inc. is celebrating its 15th anniversary. Founded in Germany in 1923, KNUTH is a worldwide leader in manufacturing and supplying the widest range of metalworking machinery in the industry. KNUTH Machine Tools USA was opened in 2003 in Wheeling, IL. Goetz Waehner was one of the first employees in the US, and is still with KNUTH USA today as National Service Manager. He has some fond memories of traveling to trade shows with Mr. Knuth before we even had a location established in the US.
In 2007 the company outgrew the first 15,000 sq. foot building in Wheeling, IL and moved to a 65,000 sq. ft. facility in Lincolnshire, IL. KNUTH’s warehouse provides customers with extensive inventory for immediate delivery. Today KNUTH USA has more than doubled their number of employees and is expanding their reach from North & Central America to include South America. KNUTH has over 400 employees worldwide and has established a comprehensive dealer network of over 65 partners in the Americas. Daniel Maerklin, President of KNUTH Machine Tools USA is proud of the growth, stating, “Our strategy of customer-focused friendly employees selling a high quality product at the best price has paid off.” In addition to sales, the KNUTH Machine Tools USA facility has a complete service, application and parts department including an on-site machine shop. KNUTH has focused on providing excellent customer service, implementing a system to guarantee a call back within 30 minutes. In 2015 KNUTH Machine Tools service Announcements Continued Page 8
We Know Long Products Improved turnaround on your production cutting orders for bar, tubing or structural shapes. Ryerson high-speed, precision carbide saws deliver close tolerance semi-finished parts in high volumes. Choose rounds, squares, hexes, tubing, angles, channels or tees. Our inventories include a wide range of grades in carbon, alloy, stainless steel, aluminum, nickel or copper alloys.
Markets Served: • Energy • Mining • Aerospace
• Industrial • OEMs
Grades Stocked: Bar - 4130 / 4140-L80 / 4140-P110 / 4340 / 8620 / 1144 / 1018 / 1045 / 304L / 316L / 17-4 / 6061 / 6063 / 7075 Tube – 4130 / 4140-L80 / 4140-P110 / 4340 / 1026 / Sq Seamless / Rec Seamless / 304L / 316L / 6061 / 6063
Processed To Fit Your Needs: High Speed In House Cutting To Tight Tolerances +/- .020” on Carbon, Alloy and Stainless +/- .063 on Aluminum
We Know Plate Products Ryerson’s full line of metal products, in combination with our wide variety of processing capabilities, can simplify your manufacturing and procurement. Whether you need a one-of-a-kind component or parts in production quantities, we offer the advantage of one stop shopping to reduce your overall costs and streamline your operations.
Markets Served: • Energy / Oil and Gas • Mining • Aerospace
Grades Stocked: Carbon & Alloy – A36, 516G70, 514, 572G50, AR400 Stainless – All Grades Aluminum – 1100, 6061, 7075, 2024, 7050, CAST TOOL
Processed To Fit Your Needs: • • • • • • • •
Oxy Fuel Cutting – Up to 12” Thick Steel High Definition Plasma Cutting – Up to 3” Thick Carbon and Stainless STD. Plasma Cut Up To 61⁄4” Stainless/Aluminum (Edgestart) Water Jet Cutting Precision Saw Cutting – Up to .005” Cut Tolerance Shearing • Beveling up to 3” Heat Treating • Temper Passing Stress Relieving
www.ryerson.com 6600 Hwy 85, Commerce City, Colorado 80022 303-287-0101 Local | 303-289-7919 Fax 800-332-1857 In State | 800-525-1811 Out Of State
514 W Pickett Circle Suite A, Salt Lake City, Utah 84115 801-820-1180 Phone | 801-820-1181 Fax 866-922-0748 Toll Free
Serving Colorado, New Mexico, Wyoming, South Dakota, Nebraska and Montana
Serving Wyoming, Idaho, Nevada and Utah A2Z Manufacturing Rocky Mountain •
7 May / June
2018
www.superiorgrinding.com
245 West Crossroads Square, S. Salt Lake, Utah 84115
801-487-9700
We Specialize in Close Tolerance Precision Grinding and Small Parts Manufacturing Celebrating 28 Years In Business
Grinding Capabilities:
Grinding & Swiss Machining Capabilities:
√ CNC Universal Grinding Capabilities of 5” x 24”
√ OD,ID Centerless Plunge and Thru Feed √ We Have 4 Swiss Turning Centers with (OD Between Centers up to 72” L x OD Swing up to 24”) Diameter capabilities up to 32mm (ID - 9” depth x 10” LD) √ CNC Circular Blade Grinding up to 20” Diameter √ Surface, Angled and Blanchard √ Long Bar Grinding for Screw Machines √ We grind all types of Industrial Blades Announcing AS9100
Revision D
Certification!
WE’RE GROWING! We Added a 2nd Supertech CNC Universal Grinder, We’ve Hired New Machinists and More!
Announcements Continued
department was acknowledged with the Stevie® Award in the category Best Customer Service Department of the Year.
Frank Fontana, VP of Sales expressed, “We are proud of our success, believe in our quality and we will show our appreciation with a 5 year no cost limited warranty on our 15 best-selling machines over the course of the next year. This sets us apart from any other machine tool brands in the country.” Please visit www.knuth-usa.com/5yrs for additional details.
Denver Precision Products Announces New Machinery Purchases Denver Precision Products upgraded two pieces of equipment at the end of 2017. We purchased a Miyano BNA-MSY42 and a Miyano BNA-42S. These two machines replaced our older machines, 1983 Miyano BNC34 and 1993 Miyano BND34S-2. Although our older machines were still holding tolerances of +/-.001, our new BNA machines can hold tighter tolerances with a CPK of 3.30 for +/-.0005. These two machines have also increased our productivity for many of our existing parts and have A2Z Manufacturing Rocky Mountain •
8 •May / June
2018
created more capabilities for new parts. Denver Precision Products continues to upgrade its machining capabilities to service our customers. For more information, contact:Amy Primrosse at 303-469-1771 or visit their website at denverprecisioncncturning.com
H2 Manufacturing Solutions CEO Is Awarded BizWest’s Women of Distinction Heidi Hostetter, CEO of H2 Manufacturing Solutions, is one of eleven women honored for their achievements in business, philanthropy, and government at BizWest’s Women of Distinction Awards April 18th, 2018. The eleven women being honored have all made considerable contributions in leadership, time, and philanthropy to the Larimer or Weld county communities. This year, nine women won awards for nine different business, government, or philanthropic categories, along with a “Leading Lady” Award and an “OutAnnouncements Continued Page 10
www.qualichem.com An ISO 9001:2008 COmpAny
Maximize the Effectiveness of Your High Pressure Coolant System When you combine QualiChem’s
XTREME CUT lubricity
with high pressure coolant system technology, you can expect: Over 100% gain in productivity Over 60% increase in tool life Cycle times to be cut in half as a result of increased speeds and feeds Significantly improved surface finishes QualiChem fluids are recommended by:
Star Metal Fluids, LLC A Distributor of QualiChem Products
1.800.367.9966 support@metalfluids.com Find what you need and order online:
Announcements Continued standing Mentor” Award. Hostetter will be honored in the Business and Business Services category. Hostetter has been a leader and fearless innovator in the Colorado manufacturing industry for more than twenty years. She leads two successful companies and is the visionary and a founder of the Alliance for the Development of Additive Processing Technologies (ADAPT) Center for additive manufacturing research. She sits on the state’s Advanced Manufacturing Accelerator review board and has led teams that earned a number of honors, including Manufacturer of the Year in 2016. Along with her role as CEO of H2 Manufacturing, Hostetter is Vice President of Fauston Tool and Board Chair of Northern Colorado Manufacturing Partnership, and chairs its annual tradeshow this year (NOCOM 2018) on April 12 at The Ranch. She has put in substantial hours of volunteer service and support for both profit and non-profit organizations, including Child Safe—which provides services for women and children affected by sexual abuse and Respite—a center for the terminally ill. She’s served in a professional capacity a number of leading organizations, including Ball Aerospace, Woodward, Neo Tech, and others. She also works for the state as a volunteer and business leader on its transition boards in Global Business Development. She has three grown children and a sevenyear-old at home, who she calls her “greatest joy.” H2 Manufacturing Solutions offers a broad range of services to A2Z Manufacturing Rocky Mountain •
10 • May / June 2018
help manufacturers navigate the daily challenges of the modern manufacturing world. Our one-stop shop addresses any business challenge a manufacturer encounters, from representing best-inclass equipment and service providers to operational improvement consulting to business development strategies to technical expertise. At H2, our mission is to make manufacturers’ day-to-day challenges more manageable and less frustrating. Our promise is to deliver Honest. Hardworking. Results. For more information, contact H2 Manufacturing Solutions at 970-692-3344 or h2@h2manufacturingsolutions.com. Visit H2 Manufacturing Solutions on the web, Facebook, Twitter, or LinkedIn.H2 Manufacturing Solutions; Mobile: 970-692-3344; adam@h2manufacturingsolutions.com
Daniel Geer Joins the MP Systems Team Daniel Geer has joined the MP Systems team as Technical Sales Account Manager for the Western Region of the United States, and Western Canada. Daniel entered the manufacturing industry in 2012 with Ellison Technologies in Southern California as a Certified Manufacturing Technology Sales Engineer (CMTSE). He earned a B.A. in Psychology Announcements Continued Page 12
3” x 4” (75mm x 100mm)
5” x 6” (125mm x 150mm)
6” x 10” (150mm x 250mm)
5
th
Vises
Dovetail Fixtures
Dovetail Cutters
www.fifthaxis.com 11 May / June
A2Z Manufacturing Rocky Mountain •
2018
at California State Polytechnic University Pomona and currently resides in Southern California with his wife and kids. You can contact Daniel at 909-282-7463. For parts, service, and shipping:please contact mpteam@mp-systems.net or call 877-689-1860. MP Systems designs rugged, dependable high pressure coolant systems, chillers and accessories for machine tools.We understand the stress points in machining. Our products are designed to minimize downtime and maximize tool life. We offer solutions that help manufacturers maximize the most sophisticated machine tools available.We also offer basic systems for less demanding applications and environments. All of MP Systems’ products were developed to meet specific customer requirements.We work closely with customers to fully understand their challenges and develop the most suitable solutions. Visit www.mp-systems.net/
Mazak’s Brian Papke Inducted Into Hall Of Fame Brian Papke, chairman of manufacturing technology leader Mazak Corp., has been inducted into the Northern Kentucky Business Hall of Fame. He accepted the award in April at the Metropolitan Club in Covington, Kentucky, where he delivered heartfelt remarks that credited Mazak’s customers and its employees for the company’s decades of success across North America. “Our customers are not just customers, they are friends, and the majority A2Z Manufacturing Rocky Mountain•
12 • May / June 2018
of our employees are homegrown,” said Papke. “We have all worked together over the years to create wonderful opportunities for families, the local community and all of the areas our customers call home.” Under Papke’s direction, Mazak has strived to give back to its customers and the manufacturing industry through its contributions to the commonwealth’s economic growth and its establishment of a successful model for manufacturing excellence. He also oversaw the Kentucky plant as it became an 800,000ft2 campus and significant regional employer.Today, the Kentucky facility serves as a proof of concept for the Mazak iSMART Factory model in addition to acting as the staging ground for some of the industry’s most advanced manufacturing systems, including innovative full 5-axis, Multi-Tasking and HYBRID Multi-Tasking machines. Papke has also served Kentucky and the manufacturing industry by working to meet the needs of his company’s customers since he joined Mazak in 1987. “One of Brian’s greatest traits is that he listens,” said Paul Hemmer, Announcements Continued Page 14
Your Machine Tool Experts for the Rocky Mountain Region since 1952 CNC Machining Centers
A Division of Productivity Inc.
Visit us on the Web: mmtproductivity.com
CNC Turning Centers
Swiss Machining EDM
Call your local office: COLORADO NEW MEXICO E. WYOMING salesdenver@mmtproductivity.com 303-571-4933
Manual Machines & Tool Room Equipment
UTAH MONTANA W. WYOMING IDAHO salesslc@mmtproductivity.com 801-886-2221
High Production CNC Turning & Milling
3D Printing/Additive Mfg.
Saws
ROBO F le x R
Automation Bridge Mills Grinding Horizontal Boring Mills Rotary Equipment Used Machines & Equip. Laser Marking
NOTE: Not all lines available in all areas. Please contact your local office for information. A2Z Manufacturing Rocky Mountain •
13 • May / June 2018
UTAH METAL WORKS
How Much Is My Metal Worth?
Tollfree: 866-434-5679 Local: 801-364-5679
CALL US
www.umw.com
now to find out!
At Utah Metal Works, recycling industrial-related scrap metal is one of the things we do best. You simply won’t find more knowledgeable, capable partners for your scrap handling and recycling efforts anywhere. We are known in the industry for our honesty and integrity, and you can be sure you are always getting a competitive return along with superior service. We make it easy for you to cash in on non-ferrous metals from:
Industrial/Manufacturing Scrap • Punchings • Solids of any metals • Turnings and borings
• Skeleton plate • Machine Shop/Fabricator • Solids of any size or type
Aircraft/High Temperature Alloy Scrap Stainless, titanium, Inconel, Hastelloy, Monel, cupronickel, aluminum;state-of-the-art metal analysis conducted on site; Mixed or contaminated items are accepted and sorted Easy Access To I80, I15, and I215 Detailed Directions On Our Website 805 West Everett Ave • Salt Lake City, UT 84116
president of Paul Hemmer Co., a construction company that often works with Mazak. “He listens to his staff and he listens to his customers.” Commissioned by NKY Magazine in partnership with the Northern Kentucky Chamber of Commerce, the Northern Kentucky Business Hall of Fame celebrates Northern Kentucky’s heritage of business accomplishments. The award honors men and women who have made a lasting contribution to the community in economic, cultural, and civic endeavors.
Revolution MachineTools is especially excited with this announcement because of the remarkable speed the Pipe Spool Master offers. Complex, precision bevels can now be completed by one operator, usually in 15 minutes or so depending on the size and scope of the material. Handling of long and cumbersome pipe and tube can be a challenge. The machine does not spin the pipe, but rather clamps and centers the material, while a facing head spins and approaches the material while inside the machine.With this machine design, you can quickly load your pipe without the need of using a crane or forklift to push or pull the pipe into position. All while taking up minimal floor space and overhead. At Revolution Machine Tools we consistently look for ways for our customers to improve their processes and therefore, their bottom line. Our success begins with your success! For more information, call (385) 3550342 or visit rmtus.com
Revolution Machine Tools Introduces Its Newest Machine, The Pipe Spool Master
Quality Vision International Groundbreaking Ceremony
Revolution Machine Tools is proud to officially announce the newest machine to our lineup, the Pipe Spool Master.The RMT Pipe Spool Master series precision bevels pipe or tube anywhere from 2” to 144” diameter.Your J, U, V and even C and even radiused bevels are now easily programmed and processed
Quality Vision International (QVI®,
A Z Manufacturing Rocky Mountain • 2
in minutes rather than hours. Add on the upgraded control, and you can even thread or vic-groove your pipe or tube. Allowing you the flexibility to chase a variety of niche markets and customers.
14 • May / June 2018
Announcements Continued Page 15
Custom Cables—Fast! Contract Manufacturers n Industrial n Food & Beverage n Digital Signage n Furniture
n
n
n
n
C2G has manufactured thousands of custom cables and adapters in the past 30 years. We can create a single custom cable or thousands of custom cables, depending on the unique needs of each individual customer. Whether it is a modified stock cable or a completely custom solution, C2G has the resources and experience to quickly deliver. We provide the highest quality products, knowledgeable consultants, and competitive prices.
CUSTOM
Use this code to get free engineering services and a free first sample valued at up to $300.
1.888.668-6818 oem-sales@c2g.com www.c2g.com
© 2017 Legrand All Rights Reserved rev. 07/17 Ad – 13829
Announcements Continued www.qvii.com), the Rochester-based manufacturer of precision optical measurement systems, broke ground today on a new 16,000 square foot manufacturing building on its Hudson Avenue campus. Construction of the new building marks the last phase of a five-year, 37,000 square foot expansion of the company’s global engineering and manufacturing headquarters. The new Building #4 is the final phase of construction to add additional manufacturing capacity. Beginning in 2014, the company added 12,500 square feet to its Assembly building, followed by a 4,200 square foot addition to its South machine shop, and a 4,000 square foot addition to its Customer Center showroom. Properties were acquired along Herald Street to provide the necessary land for buildings and parking.The Hudson Avenue campus occupies more than 275,000 square feet of manufacturing space and employs over 300 full time staff. Quality Vision International (www.qvii.com) is the world’s largest vision metrology company. Founded in Rochester in 1945, QVI manufactures optical instruments used by industry worldwide to measure critical dimensions on a wide variety of parts and assemblies. Manufacturers in the automotive, aerospace, medical, electronics and plastics industries use QVI systems to monitor and improve their product quality and productivity. QVI delivers over 1,500 metrology systems per year, operates regional technology centers in ten countries, and provides support and service to over 65,000 machines worldwide. Metrology is the science of measurement. Vision Metrology is the specialized branch of metrology that uses optics to examine an object, and perform measurements. Vision metrology is frequently used to measure objects that are too small or too fragile to be
measured by other means. QVI is the global market share leader in precision vision metrology systems for industrial quality and process control.
Buds Cooling Fans Announces Reginal Expansion In Western US Bryan “Bud” Jorgenson, owner of Buds Equipment Sales in Salk Lake City UT, has now opened additional stocking locations in California, Nevada and Arizona due to the popularity of his cooling fans. Bryan launched his evaporative cooling line of fans in 2016, after being involved in metal fabrication machine tool sales for over 16 years. He became a dealer of these cooling products Announcements Continued Page 16 A2Z Manufacturing Rocky Mountain •
15 • May / June 2018
at Stonebridge Golf Club , and the Shotgun event will start at 8 am. Other NUNTMA events scheduled include:
Erickson Metals of Colorado is fully committed to being the premier supplier of aluminum coil, sheet, plate, rod & bar, pipe & tube and shapes.
Aluminum Services:
Why Choose Erickson Metals For Your Aluminum Requirements? 1. Our History. Quality Aluminum Products
√ Saw Cut Plate
Since 1972.
√ Cut To Length Sheet
2. Complete Stock: To give our customers quick turn-around on all deliveries.
√ Shearing
3. Superior Customer Service. We
√ Slitting
offer efficiency on all levels, excellent
√ Rolling
responsiveness, and fast turnaround times.
√ Annealing EXTRAORDINARY SERVICE, FAST TURNAROUND
WHATEVER IT TAKES!
Erickson Metals of Colorado, Inc 5045 Oakland St. • Denver, CO 80239 303-373-0820 Email: SalesCO@EricksonMetals.com
Announcements Continued
after learning of the patented features, quality and durability compared to what was being offered in the marketplace.
OCTOBER 11: CHAPTER MEETING-Attorney (Location TBD) N OV E M B E R 8 : A N N UA L MEETING/ROUNDTABLE DECEMBER 13: CHAPTER MEETING (Detroit Diesel-Fowler) NUNTMA is the Northern Utah chapter of the National Tooling & Machining Association. As a chapter focusing on supporting the precision machining and manufacturing industry along the Wasatch Front, NUNTMA welcomes machining companies and others concerned about creating a dynamic environment where businesses can grow and thrive. Our current focus is to develop the best talent from our Northern Utah communities by providing information about how to become a machinist apprentice. For information on membership and attending the luncheon with Lt. Gov Cox, please contact: Maddie Dahl; NUNTMA Chapter Executive; chapterexec@NUNTMA.ORG
Methods MachineTools Celebrates 60Th Anniversary
Bryan indicates that his fans can drop the core temperature by up to 35 degrees as well as effectively filtering out dust particles in the air.
Annual NUNTMA Golf Tournament
8th
For more information, please contact Bryan at (435) 659-9455; Web Link: budsequipment.com E-mail: budsequipment5@gmail.com ^ƚŽŶĞďƌŝĚŐĞ 'ŽůĨ ůƵď
Northern^ĞƉƚĞŵďĞƌ Ϯϭ͕ ϮϬϭϴ Utah Tooling and Machining As^ŚŽƚŐƵŶ ^ƚĂƌƚ Ăƚ ϴ D sociation Invites You To Upcoming Meetings ΨϱϬͬ'ŽůĨĞƌ
/ŶĐůƵĚĞƐ ƌĞĂŬĨĂƐƚ͕ >ƵŶĐŚ͕ ϭϴ ŚŽůĞƐ͕ The Northern Utah Tooling and Machining Association invites those in Ă ĐĂƌƚ ĂŶĚ ƉƌŝnjĞƐ͊ the manufacturing industry to come to their 8th annual golf tournament. WůĞĂƐĞ Z^sW Ăƚ ŚƚƚƉƐ͗ͬͬŐŽŽ͘ŐůͬĨŽƌŵƐͬŶyǁŚ LJZĚϯhƚǀ 'ZsϮ ďLJ ^ĞƉƚĞŵďĞƌ ϭϬ The ŽŶƚĂĐƚ DĂĚĚŝĞ ; ŚĂƉƚĞƌĞdžĞĐΛŶƵŶƚŵĂ͘ŽƌŐͿ ǁŝƚŚ ĂŶLJ ƋƵĞƐƚŝŽŶƐ golf tournament is a huge success each year. It will take place on 9/21 A2Z Manufacturing Rocky Mountain •
16 • May / June
2018
&ƵŶĚƌĂŝƐĞƌ ĨŽƌ EhEdD ŚĂƉƚĞƌ͊ Z/E' ^,͊ Z &&> WZ/ ^͕ hE>/D/d Dh>>/' E^͕ E Kd, Z
This year, Methods Machine Tools, Inc. (www.methodsmachine.com), North America’s foremost supplier of leading-edge precision machine
tools, automation and additive manufacturing solutions, is celebrating its 60th anniversary. Founded in November of 1958, with 3 employees and a few refurbished machines, Methods has grown into one of the largest, most innovative, high precision machine tool suppliers in North America. Methods today has roughly 350 employees, 8 sales and technology centers and over 35,000 machines installed throughout North America, ranging from EDM machines to sophisticated 5-Axis CNC Machining Centers to state-ofthe-art robotics, automation and 3D printing solutions. The company’s founder Mr. Clement McIver Sr. established principles that have continued to set Methods apart from conventional impor ters or distributors: “Anyone can sell a machine. But not everyone provides the extra effort that makes a difference on a company’s bottom line”— Clem McIver Sr., 1917 - 1995. “Staying true to our founder’s vision, we have built an excellent reputation in the machine tool industry by closely partnering with machine builders and customers, as well as providing strong application expertise,” says Mr. Scott McIver, Methods Chairman and 3rd generation Owner. “We offer a total service solution from design and applications to engineering, installation, training and unmatched support, to help manufacturers be more profitable, productive and competitive.” Methods’ product line strategy offers only the most advanced, optimal technology for each machining discipline or class. Machine tool partners include Nakamura-Tome, Yasda, FANUC, KIWA-Japan and most recently, Niigata Machine. EDM partners
HIGH PRESSURE DIE CASTINGS Aluminum, Magnesium & Zinc ISO 9001:2015
ISO 14001:2015
With over 80 years of experience, Chicago White Metal can meet your most challenging requirements, whether it is an existing die casting design or a conversion from another die casting production process. We understand that the success of your project requires a partner with the technology and expertise to provide innovative, high quality results. www.cwmdiecast.com +1 (630) 595‐4424 sales@cwmtl.com include FANUC Wire EDM’s and new partner Ocean Technologies Co., Ltd. In addition, Methods 3D, Inc. provides the industry’s most advanced 3D printing solutions through 3D Systems and MarkForged. For measurement and inspection solutions, Methods offers Digital Optical Comparators from VISIONx INC. Strategically located across the U.S., Methods Sales and Technology Centers complement an extensive, national network of distributors and dealers, offering the latest technology and automation solutions, machines, training, spare parts and engineering support demanded by manufacturers. In addition, the company has state-of-the-art Automation Centers in three locations as well as 3D printing labs throughout the U.S. To commemorate its impressive anniversary milestone, Methods will be hosting Open Houses, holding Technology Events and introducing new product lines throughout the year. Methods Machine Tools, Inc. is privately held and headquartered in Sudbury, Massachusetts U.S.A., with an expansive campus including a 125,000 square foot showroom featuring the latest metalworking technology and a vast array of advanced CNC machines, EDM and automation under power. For more information about Methods Machine Tools, Inc., the company’s history or the 60th Anniversary, please contact Mr. Jerry Rex, Methods President & CEO, TEL: (978) 443-5388, or visit www.methodsmachine.com A2Z Manufacturing Rocky Mountain •
17 May / June
2018
ULA picks Aerojet Rocketdyne engine Rocket company United Launch Alliance will stick with an Aerojet Rocketdyne engine for the upper stage of ULA’s new Vulcan rocket.
GMA GARNET GROUP when your abrasive matters!
Centennial-based ULA announced that the Aerojet Rocketdyne RL10 engine, which has powered the company’s rocket upper stages for years, will remain the upper-stage engine of choice after Vulcan starts flying in 2020. ULA reach a long-term agreement with Sacramento, California-based Aerojet Rocketdyne to supply RL10s “for the next decade” and develop a new variation of the RL-10 for ULA to use as well, the company said.
PANTONE Process Black PC R:35 G:31 B:32 C:70 M:67 Y:64 K:74
50% PANTONE Process Black PC R:145 G:143 B:143 C:45 M:38 Y:38 K:3
30% PANTONE Process Black PC R:189 G:188 B:188 C:26 M:21 Y:22 K:0
PANTONE 364 PC R:43 G:117 B:58 C:84 M:31 Y:100 K:19
“ULA and Aerojet Rocketdyne have a long and successful history together that began with the first flight of our Atlas and Delta rockets in the 1960s,” said Tory Bruno, ULA president and CEO, in a written statement. “We could not be more pleased to have selected the proven and reliable RL10 to power our Vulcan Centaur upper stage.”
PANTONE Yellow PC R:255 G:238 B:0 C:3 M:0 Y:96 K:0
ULA considered other upper-stage engine options and as recently as last month was publicly holding open the possibility it could switch suppliers. “Key determining factors to our selection included price and delivery schedule,” Bruno said. The rocket company is an 11-year-old joint venture of Boeing Co. and Lockheed Martin Corp.
fg.1/4 pg.3.2015.OUTLINES.indd 1
3/23/15 6:33 AM
S Specialty Specia ialt lty Steel Steel S Service, Inc.
“Small Sma l enough en ugh tto care, are La Large enough to serve.” Lar We stock a large variety of the metals you need.
-Tool and Die steels -Alloys and Carbon -Aluminum Plate As well as being the authorized distrubutor of Precision Marshall and Latrobe Steel products.
But ULA has favored the methane-fueled booster engine being developed by Jeff Bezos’ Blue Origin, called the BE-4. Bruno has said ULA has worked out contract terms and is waiting to see the BE-4 pass technical tests before finalizing its choice for Vulcan.
-Production Cutting -Aluminum Plate Cutting -Cold Sawing - Delivering to Salt Lake, Utah, Davis, and Weber counties everyday
334 W. 800 S. Salt Lake City, Utah 84101 Toll Free 1-800-890-5950 Telephone (801) 539-8252 Fax (801) 539-8311 Email Scott@specialtysteelservice.com
18 • May / June
The new version of the upper-stage engine, dubbed the RL10C-X, will increase the use of additive manufacturing — an advanced form of 3-D printing using metals — and introduce other advanced technologies to improve the engine's quality, reliability, affordability and performance, ULA said. The contract is a significant win for Aerojet Rocketdyne.The company has been developing a new booster-stage engine, called AR-1, it hopes ULA will buy and use to power Vulcan rockets off the launch pad.
We offer a variety of services, including:
A2Z Manufacturing Rocky Mountain •
More than 450 of the RL-10 engines have been used on ULA rockets, including launches pre-dating the joint venture’s formation.
2018
In 2015, ULA reached a long-term agreement with Dulles,Virginia-based Orbital ATK to supply strap-on solid rocket boosters for Vulcan, which provide extra lift during initial launch for missions carrying large payloads. Aerojet Rocketdyne has been a long-time supplier of strap-on boosters to ULA for its workhorse AtlasV rockets, which will be phased out in coming years and replaced by the Vulcan rocket. Source: Denver Business Journal
The Four Pillars Of Modernization: People, Processes, Technology, And Customers. This Approach Is Working For The Jaguar Precision Machine (JPM) Team, And The Company Continues To Grow By >20% Year Over Year. People — “Interns are our secret weapon”, says JPM owner Dan Schatzman.Veteran-owned JPM continues to hire engineering students who intern with the company during the years of their undergraduate studies. In late May, I interviewed the JPM team at their 15,000 square foot facility in Albuquerque, NM. On this day, a professor from Navajo Technical University and 8 of his students came to tour JPM in order to evaluate options to intern with the precision machine shop for the summer. By the end of the tour, JPM had secured one engineering intern with a possibility for a 2nd. Within the team of ~ 20, today JPM has 4 interns, including 2 engineering students and a business student from UNM, and 1 welding student from CNM. Also, on the day I was at JPM, it was Operation Manager Seth Billie’s birthday. As is standard operating procedure at JPM, a pizza party celebration was offered to all for lunch. Machinists at JPM aren’t button pushers; in fact every machinist is well skilled in both machining and programming. The interns (Generation Z’ers) say that what makes JPM a ‘great place to work’ includes: flexibility in the working environment, the ability to wear many hats and to increase their skill sets and the company’s willingness to embrace and invest in new technology. JPM donates ~$10,000 in machine work to the UNM racecar competition each year. Dan says that UNM has a budget of about $85,000 to build their racecar, and they are competing against universities with budgets in the millions. Nearly every year UNM places in the Top 5 in the competition. Processes — The company has long been certified to ISO 9001: 2008 and they recently upgraded to ISO 9001: 2015. Business planning is an integral process at JPM, and all JPM team leaders participate in reviewing and updating the business plan on a quarterly basis. Continuous learning is yet another key factor in JPM’s success. Controller Linnette Richards says, “We invest in the latest business, machine, and software technology. In order to maximize our use of it, we invest in continuous training of our team.” Technology — When Dan purchased the company in 2014; the management team immediately began to replace older machines with newer technology. Today the company purchases the latest in machines, tooling, software and interfaces.All machines are equipped with 2 large screen displays. The company recently partnered with another company to bring additive manufacturing to JPM’s customers. In the last two years, the company’s newest mills and lathes have been Haas machine tools, including the Haas UMC 750, a universal machining center for 3+2 machining and simultaneous 5-axis machining. One of JPM’s machinists commented, “We picked the Haas machines due to their price points and their outstanding service.” He continued, “Two outstanding feature options we get with our Haas machines are the tool probing and the spindle probing.While these options are available with other machines,
they don’t exist with machines in this price point.” “Also”, he continued, “MMT,A Division of Productivity, is the dealer for our Haas machines.When we need service, we call MMT and they are here to support us same day or next day.” DannyWhite, Sales Engineer for MMT supporting customers in New Mexico and the Colorado Western Slope, says, “Sales is about getting the right machine for the customer’s needs. After that it is our top notch service, applications, parts and tooling team that keeps our customers coming back to MMT when making future decisions.” Dan and Seth agree that the JPM team members all value Danny’s knowledge of the machining industry. Seth says, “Prior to becoming a sales person, Danny was a service engineer. It is invaluable having a sales person with Danny’s strong expertise.” He added, “Danny isn’t just knowledgeable; we count on him and he always takes care of us.” JPM Purchasing Manager Michelle Summers adds that Danny and the MMT team have so successfully earned their trust that the company recently purchased other products from MMT, including a Marvel saw and the Pro Vend machine tool vending machine. Customers — JPM’s customer base is highly technical, with the majority in the Aerospace, Defense and Space industries. Kenton Losinski, Sales Engineer for the company, says, “Our customers require partners/suppliers that have the ability to machine exotic alloys, including Hasteloy, Inconel andTitanium. We are known for our ability to machine parts with difficult geometries, and above all, we recognize the need to meet or exceed our customers’ Quality and On-Time metrics.” JPM is an outstanding precision machine shop that offers a wealth of engineering talent. To find out how they can support your precision product needs, contact them at (505) 242-6545 or visit www.JaguarPM.com Since 1968, Productivity, Inc. has offered superior products to the manufacturing industry. Through its acquisition of MMT, the company supports customers in NM, CO, UT, MT,WY, MT and ID. Contact them at (800) 947-8665 or visit www.mmtproductivity.com A2Z Manufacturing Rocky Mountain •
19 May / June
2018
NASA’s Lockheed-Built Lander Poised For Long-Awaited Trip To Mars NASA’s next space probe headed to Mars — a lander built in Jefferson County and launched on a Colorado rocket — may soon start its journey after two years of waiting. NASA or ig inally scheduled the $828.8 million mission to blast off two years ago. A problem with a seismic instrument, built by France’s Centre National d’Études Spatiales (CNES), prompted NASA to postpone launching InSight until the next time Mars’s orbit aligned with earth’s for an optimal flight. The InSight spacecraft and launch teams are ready. However, Air Force forecasts show an 80 percent chance of coastal fog heavy enough to scrub the pre-dawn launch due to poor visibility. If fog forces more waiting, there are other launch times that will work to launch InSight prior to June 6. The Mars InSight lander, formally called the Interior Exploration using Seismic Investigations Geodesy and HeatTransport, is designed to land and then drill nearly 16 feet beneath the Martian surface and monitor the subsurface temperature. Other instruments will take surface seismic readings. The mission is expected to yield new information about the red planet’s interior — such as the composition of its core — and its geological processes. Lockheed Martin Space led construction on the multi-national mission. The company, which has been a key player on seven previous NASA Mars missions, won the $425 million contract to build InSight in 2012. The probe is 8.5 feet in diameter and weighs about 400 pounds.With its heat shield and entry vehicle enveloping it, the overall Insight payload resembles the size of a very small car. InSight will blast off atop an AtlasV rocket built by Centennial-based United Launch Alliance, which has launched all NASA planetary probes since 2006. Around 11 a.m. Nov. 26, if all goes according to plan, InSight will descend through Mars’ atmosphere at nearly 12,000 miles per hour. A heat shield will ward off most of the friction and slow InSight, inside its protective aeroshell, enough for parachutes to deploy and slow the craft further. A2Z Manufacturing Rocky Mountain • RockyMtnSaw-Flyer.indd 1
20 • May / June 2018 11/15/16 1:17 PM
Close to Mars’s surface, the parachutes release InSight and thrusters fire to provide it a gentle five-mile-per-hour landing in the planet’s western Elysium Planitia region. U.S. and European space agencies built the scientific instruments that Lockheed Martin Space integrated into the InSight lander. In a 2015 file photo, NASA’s Mars-bound InSight spacecraft is loaded into a C-17 cargo aircraft at Buckley Air Force Base that was bound for Vandenberg Air Force Base, California. The spacecraft, built by Lockheed Martin Space Systems, was scheduled for launch that year but was delayed and is now slated to take off May 5, 2018. Since the last time it was shipped to California for its 2016 launch, French engineers and NASA’s Jet Propulsion Laboratory redesigned a problematic vacuum seal on the lander’s key seismic instrument. The delay and repair added $153.8 million to the original cost of the mission, according to NASA.
(303) 466-3777 foothillsmachinery.com
InSight’s replacement seismic instr ument was installed, integrated and tested extensively at Lockheed’s campus in Colorado before sending the lander back to California in February. A team of 25 Lockheed Martin Space employees have been with the lander there for three months, and another 25 traveled there this week for InSight’s launch. Getting the spacecraft on its way to Mars will be a big deal for the company. About 150 people worked on the probe at the height of assembly activity, and well over 1,000 employees there will have a hand in the mission over the six years it has been in development, Spath said.
InSight will be the first interplanetary probe to take off from Vandenberg Air Force Base. A2Z_Met_5-Axis-UYTP-Ad.indd 1
3/27/2017 10:03:44 AM
In 2016, Lockheed Martin Space teams weren’t familiar with theWest Coast launch site.And then there was the problem instrument and the possibility of integrating the new one at the launch site to keep InSight on schedule. Once InSight leaves earth, a team from Lockheed’sWaterton campus will monitor and spacecraft from Colorado and make any adjustments needed for its flight. The same crew will oversee InSight’s flight down through the Martian atmosphere and its time on Mars soil, too. It’s a “cradle-to-grave” job to make sure InSight is operating healthily, Spath said.That’s designed to be 728 earth days on the red planet, but will continue until NASA decides InSight’s job is done. It will be the seventh space probe managed from the company’s spacecraft operation’s center. Source: By Greg Avery – Reporter, Denver Business Journal A2Z Manufacturing Rocky Mountain •
21 • May / June 2018
Precision Precision Ceramic Ceramic Machining Machining
Kansas City Firm Acquires Denver Electrical Distributor Kansas-based Barr-Thorp Electric Co. Inc. has acquired Denverbased CPI Automation & Control Solutions for an undisclosed amount.
Since Since The acquisition now puts Barr-Thorp in Denver, a new market that 1984 1984 adds to its locations in Merriam, Wichita, and Sabetha, Kansas., • Alumina • Forsterite Springfield, Missouri, and Omaha. It was the largest acquisition in • Alumina • Forsterite MgPSZ & YTZP Ceramics (MACOR) •• Zirconia’s Zirconia’s MgPSZ & YTZP • Machinable • Machinable Ceramics [MACOR] the company’s history. CPI Automation had 20 employees, who now •• Silicon SiliconNitride Nitride • Mullite • Mullite join 50 at Barr-Thorp. •• Sialon Sialon • Ferrite • Ferrite • Silicon SiliconCarbide Carbide • Quartz Founded in 1923, Barr-Thorp is a provider of high-technology • Quartz •• Aluminum Aluminum Nitride • Zirconia Toughened Nitride products for the industrial manufacturing, original equipment •• Boron BoronNitride Nitride Alumina [ZTA]Alumina (ZTA) • Zirconia Toughened • Sapphire manufacturing and systems integration markets. CPI Automation • Sapphire was founded in 1948, expanded its business in 1986 and is a similar company.
“They’re a distributor just like we are,” Barr-Thorp President Todd Thorp told the Kansas City Business Journal. “They go to the market the same way and carry the same breadth of product. They’re in an adjoining state to our network in Kansas, Missouri and Nebraska and we were looking to expand outside of our territory. It was opportunistic.”
845 Research Drive, Woodland Park, CO 80863 • Ph: (719) 687-0888 Fax: (719) 687-0889 info@okeefeceramics.com
www.okeefeceramics.com ISO 9001: 2008 Quality Management SysISO 9001:2008 Quality Management System
www.okeefeceramics.com
Thorp, a third-generation leader at Barr-Thorpe, said he’s admired CPI Automation for many years and is excited to work with them. He said the company also will continue to be interested in other opportunities to expand through acquisitions.
Colorado Company Completes Graphite Firm Buy; Bets Big On Batteries A Colorado company has completed its purchase of a Canadian company that owns a graphite project in Alabama. Westwater Resources Inc. of Centennial said it’s completed its purchase of Alabama Graphite Corp. in an all-stock deal. OSHA Compliant Work Platforms
Elevated or hard to reach machinery is no match for a custom access solution from EZ-ACCESS Call our Industrial/Commercial Dept. at (888) 362-8612 www.ezaccess.com/industrial-commercial A2Z Manufacturing Rocky Mountain •
22 • May / June
2018
Westwater is betting big on graphite: According to the company, there’s currently no domestic production of natural graphite. Westwater said it plans to produce advanced battery materials on a pilot scale during 2019. Graphite is used in the production of lithium-ion batteries (graphite is used to manufacture the anode in a lithium-ion battery). Alabama Graphite has the mineral rights in the Coosa graphite project near
5 year warranty on our top 15 selling models. The new standard others will be judged by. WE TRUST IN OUR QUALITY. YOU CAN TOO! Call: 847-415-3333 WWW.KNUTH-USA.COM/5YRS
Financing Available Dealer Inquiries Welcome
MILLS - LATHES - D RILLS - G RINDERS - SAWS - PRESS B RAKES - S HEARS - EDMS - CNC MACHINERY
Sylacauga, Alabama, about 50 miles southeast of Birmingham. “This is a transformational event for Westwater Resources. Our expansion into the battery-ready graphite industry takes full advantage of the rapid growth in energy storage markets and the materials they require,” said CEO Chris Jones, in a statement.The deal was originally announced in December. With the acquisition,Westwater is changing its focus.The company used to be known as Uranium Resources Inc. but changed its name in August after it said it wanted to also concentrate on the lithium market. It now operates in the lithium, graphite and uranium markets; “mineral resources that are materials essential to clean energy production,” according to the company. The Birmingham Business Journal, a sister publication of the DBJ, explained Alabama Graphite’s Coosa project in 2016. Source: Denver Business Journal, By Ben Miller
Why First Solar Is Doubling Down On U.S. Manufacturing
We have created an interactive dashboard analysis showing our expectations for First Solar over 2018. You can modify the key drivers to arrive at your own forecasts and valuation for the company. While First Solar has typically done a bulk of its manufacturing in Asia, there appear to be multiple advantages in moving capacity towards the U.S. in the current environment. Firstly, the recent overhaul of the U.S. tax code has boosted the economic rationale for producing in the country. Moreover, labor accounts for a smaller portion of the manufacturing costs of the new Series 6 modules, reducing the effective cost savings of manufacturing in countries such as Malaysia or Vietnam.
First Solar published its Q1 2018 results last month, beating market expectations on revenues and earnings, driven by solar project sales in markets including India, Japan, and the U.S. First Solar has been seeing strong demand for its Series 6 modules, for which it recently started commercial shipments.The company also continues to witness tailwinds from the imposition of import duties on silicon-based panels and cells, to which its Cd-Te based products are not subject.Year to date, the company booked a total of 3.3 GW of capacity, with its shipment backlog standing at about 10.6 GW (including both systems and third-party module).
Additionally, a bulk of First Solar’s demand continues to come from North America, meaning that it could cut logistics costs by producing in the U.S.
Considering the strong bookings and demand for the new Series 6 panels, the company announced that it would be building a new module manufacturing facility with 1.2 gigawatts of capacity next to its current manufacturing operations in Ohio.This would help the company increase its planned U.S. Series 6 capacity to 1.8 GW with its total planned Series 6 capacity standing at 6.6 GW.
Close to three-quarters of the company’s potential booking opportunities come from the North American market. Source: Forbes
A2Z Manufacturing Rocky Mountain •
23 May / June
2018
Contract Assembly and Manufacturing
Service, quality, reliability and on time delivery are just a few reasons why companies rely on RMS Assembly for all their contract assembly and contract manufacturing needs. RMS Assembly offers the most complete list of services available including... • • • • •
Mechanical Assembly Electrical Assembly Power Supplies Main Control Panels Product Packaging
• • • • •
Turnkey or Consignment Bottle Filling Teflon Taping Wire Harnesses Wire Cutting / Kitting
303.777.3064 • rrdalton@rmsassembly.com • www.rmsassembly.com 1275 Rock Creek Cir • Lafayette, Colorado 80026 Robotics And Drones Are Being Used Increasingly In Agriculture
citizens rather than implementing solutions for bee die-off, inspiration is inspiration regardless the source.
Bees are losing ground to colony collapse disorder, a worldwide dieoff theoretically attributed to a variety of issues: pollution, pesticides, pathogens, fungicides, climate change, genetically modified crops, parasitic insects, malnutrition and more.
On March 8, 2018, Walmart applied for a patent (not yet approved) with the U.S. Patent Office for drone pollinators designed to fly from plant to plant, collecting pollen from one and depositing it on the next. Another drone would hover along behind to monitor the accuracy of the first one — sort of a supervisor drone.
Regardless the cause, the effect presents a dire problem for agriculture. Reproduction of many crops including apples, almonds, blueberries, peaches and nuts depends on pollinators. Several bee species have already made the sad leap from productive hives to the endangered species list. Globally and in the U.S., vast classifications of foods could disappear with them should extinction occur. Research on the disorder continues while scientists pursue various methods of artificial pollination. For example, pollen has been collected and spread by aerial applicators; some even applied by hand with paint brushes. Japan’s National Institute of Advanced Industrial Science and Technology crosspollinated Japanese lilies in 2017 using a 1.5-inch drone. The process employs a coating of horse hair and ionic sticky gel on the busy little metal device. Ironically, that drone is similar to ones featured in the final episode of Netflix’s Black Mirror. Although its Autonomous Drone Insects turned out to be secretly conducting government surveillance on A2Z Manufacturing Rocky Mountain •
24 • May / June
2018
But nail-biting worries about bees doing it or not doing it are sharing the stage with cutting-edge technologies for additional agricultural applications. Robotics are already being implemented in strawberry harvesting, fresh-fruit picking, the dairy industry, data mapping and seeding. Autonomous tractors might soon become commonplace. Technology already allows a drone to communicate information about the exact nature and location of individual weeds in a field. The responding tractor, based on GPS-like systems, then knows exactly when, where and the proper amount of herbicide to apply rather than blindly dousing an entire field. On April 4, an interactive presentation at Colorado State University shared a broad overview of the future of farming in our technological society as described by presenters Raj Khosla and Tom McKinnon. Khosla is a nationally and internationally known expert on precision
agriculture and its many uses. He has generated many discoveries in that field, including innovative techniques now in use in Colorado, nationally and around the world. Quantifying variability of spatially diverse soils using satellite-based remote sensing to create management zones maximizes profits by reducing use of inputs. Khosla named the “five R’s of precision agriculture: at the Right time; in the Right amount; at the Right place; use of the Right input; in the Right manner.” These, he remarked, are the keys to the technique.
Bud’s Equipment
Stocking Locations: California • Arizona • Nevada • Utah
For example, he pointed to the past three years’ corn prices, which have been down due to a product glut. Precision agriculture farms the data to add value rather than simply trying to produce more low-profit corn (and thereby adding to the glut). Application of nitrogen, potassium, etc. is tailor-made per parts of a field based on information collected by drone technology. Khosla showed the audience a series of slides in discussion of CSU’s ARDEC research farm’s successes in precision agriculture. Massive amounts of drone-generated data per field have consistently and accurately predicted yields and lowered production costs, thereby increasing profit. The seminar co-presenter was McKinnon, founder of Boulderbased company, Agribotix.The small company began in 2012 when using drones to track a particular species of vulture. Now exclusively focusing on software products, Agribotix operates in 54 countries. vMcKinnon explained drone usage in the variable application of water, pesticides, fungicides, herbicides and fertilizer. He pointed out that, while data now comes from satellites and manned aircraft as well, only drones can fly under the clouds.
budsequipment5@gmail.com
McKinnon further discussed pertinent topics such as the final data product, cost, safety, reliability and ease of use. McKinnon mentioned Blue River Technology, which has trained a computer to identify and “nail” only the weeds with herbicide in strawberry fields as the tractor moves along. Khosla reminded the audience that the first moon landing occurred nearly 50 years ago, on July 21, 1969. The Apollo 11 computer used in that astounding feat of space exploration would be no match for even the Galaxy 56 phone… which is 4 billion times faster. Drones in agriculture now offer farming similar technological advantages to those that most people hold in their hand and use throughout each day. These robotic solutions maximize data, lower input investment and increase profit. Some even offer a helping wing to busy little bees that struggle to survive. — Martey Metzger is a freelance writer from Fort Collins. She wrote this on behalf of The Fence Post, a Tribune sister publication. She can be reached at ponytime47@gmail.com. A2Z Manufacturing Rocky Mountain •
25 May / June
2018
Co. might be exploring purchasing Woodward; a report that Woodward dispelled as an “incorrect rumor.”
Making Precision Machined Parts Since 1974
Woodward reported 2017 sales of about $2.1 billion and has around 7,400 employees worldwide. Source: Denver Business Journal
Howard Precision Machined Products
Chinese Company Invests In Colorado Supersonic Plane Maker
Davenport and CNC Machines Prototype to Production Up to 3.00” Diameters
A Chinese travel service company is making an investment in a Denver company trying to build a supersonic airplane.
Ctrip.com International, Ltd. of China said it’s investing in Boom, a Centennial Airport-based company that said it’s building a $200 million supersonic plane with three engines, 55 seats and a cruising speed of Mach 2.2, or 1,451 mph.
776 West Honda Park Drive, Bluffdale, Utah 84065 801-619-9850
ryan@howardpmp.com
www.howardpmp.com
Colorado Aerospace Company Buys RollsRoyce Parts Maker For $859 Million Woodward Inc. said it’s buying L’Orange, a fuel injection systems technology company owned by Rolls-Royce, for $859 million.
“Ctrip offers valuable expertise in the Chinese travel market, and we’re excited to work with their passionate, entrepreneurial team to bring supersonic travel to the region” said Blake Scholl, founder and CEO of Boom, in a statement. In December, the Denver Business Journal reported that Boom has raised more than $51.8 million from investors. In addition, the company received a $10 million investment from Japan Air Lines and has also received orders from Virgin Galactic. Source: Denver Business Journal
NASA’s Orion, SLS Programs Get Funding Boost In New Federal Spending Bill
Fort Collins-based Woodward said Germany-based L’Orange is one of the world’s leading suppliers of fuel injection systems for industrial diesel, heavy fuel oil and dual-fuel engines. “L’Orange is an excellent strategic and financial fit for Woodward, and this transaction exemplifies our acquisition strategy to invest in markets with solid long-term fundamentals. The acquisition of L’Orange brings innovative technology, bolsters relationships with key customers and enhances the profitability of our Industrial segment,” said Thomas Gendron, CEO and chairman of Woodward, in a statement. L’Orange will be renamed Woodward L’Orange. The purchase comes a few months after Woodward said it will close its Duarte, California that makes thrust reverser actuation systems and move the operations to its Fort Collins campus. That move will cost the company about $12 million, Woodward said Monday. In February, the Wall Street Journal hinted in a story that Boeing A2Z Manufacturing Rocky Mountain •
26 • May / June
2018
The federal spending bill signed by President Donald Trump found $164 million in additional funding this year for NASA’s Orion capsule, the deep-space vehicle being built by Jefferson County-based Lockheed Martin Space Systems Co.
The president signed Congress’ $1.3 trillion appropriations bill last month, authorizing spending above what the president’s budget proposals sought for many programs, including Orion and its accompanying massive rocket. The omnibus bill provides NASA with a $20.7 billion budget for the 2018 federal fiscal year that’s already five months old. The budget calls for $1.35 billion for Orion. That compares to the $1.186 billion NASA was projecting under the president proposal this fiscal year. Similarly, the Space Launch System rocket, or SLS, being built to launch Orion — a project led by contractors Orbital ATK and Boeing Co. — receives $2.15 billion in the approved budget. NASA had previously expected nearly $1.94 billion under the president’s budget proposal. Development of the SLS upper stage rocket, a mobile launch platfor m for the rocket and ground systems for Orion and SLS receive another $1.515 billion. NASA commissioned Orion in 2006 as the spacecraft for traveling to the outer reaches of earth orbit and beyond, where mission distances are in the millions of miles, durations are long and radiation exposure is more intense than crews experience in lowearth orbits like those the space shuttle flew. LMSS won the contract to design and develop technology for the Orion capsules and to build the actual flight capsules for Orion’s two for missions. LMSS is a 14,000-employee divi-
sion of Bethesda, Maryland-based Lockheed Martin Corp. An Orion has been test-launched once in a 2014 flight without astronauts aboard. That mission launched atop a Delta IV rocket built by Centennial-based United Launch Alliance. Orion’s future missions are planned to launch using the SLS, a rocket capable of lifting 130 metric tons into orbit. The next Orion flight, known at Exploration Mission 1, is slated to take place in 2019, a threeweek mission without crew aboard. Orion and SLS’ first flight with astronauts aboard is slated to be in 2022. The omnibus bill signed also calls on NASA to use SLS to launch a pair of unmanned probes to the Jupiter moon called Europa, an orbiter by 2022 and a lander by 2024. By Greg Avery – Reporter, Denver Business Journal A2Z Manufacturing Rocky Mountain •
27 May / June
2018
and March. Capacity utilization for durable manufacturing moved upwards a percentage point to 76% in February as did Industrial Production which climbed to and index level of 106. The Michigan Consumer Confidence Index climbed 4 points in February and another 2 in March sitting at an index level of 101. Durable goods orders were up half a percent to $248 billion in February. The only indicator to move downward was the Purchasing Managers’ Index which moved from 61 to 59 which still represents a strong expansion of manufacturing business. By Elizabeth Engler Modic
GE, US Ar my conduct PDR for T901 improved turbine engine
Manufacturing Technology Shows Strength U.S. manufacturing technology orders for the first two months of 2018 climbed 27% higher than the same period in 2017 signaling continued strength in the recovery initiated in June 2017, according to the latest U.S. Manufacturing Technology Orders (USMTO) report from AMT – The Association For Manufacturing Technology. Orders totaled $354 million in February, down 5% from a 22-year high in January. “Our industry’s market is up 27% from 2017 as order growth rates accelerate; customers clamor for greater productivity and more capacity; and our member companies push their limits to keep pace with the market’s expansion,” says Pat McGibbon, AMT’s vice president of strategic analytics. “AMT supports free and fair trade; but recent trade issues with several of our major trading partners including China, the world’s largest consumer of manufacturing tech, will make harvesting the benefits of this boom market more challenging.” Every region saw significant year-to-date growth rates ranging from 15% to 76% even though monthto-month rates varied from a not as high as 19% in the Northeast region to a decline of 24% in the North Central-West region. The variation in growth levels reflects the regionality of sectors that were major forces in moving the market down, such as oil and gas exploration in the South-Central region or mining and off-road equipment in the North Central-West. Likewise, regions which have significant amounts of automotive, medical equipment or aerospace fared better during the downturn such as the Northeast, Southeast, and West regions. The key leading indicators for the manufacturing technology market were very strong in February A2Z Manufacturing Rocky Mountain •
28 • May / June
2018
GE Aviation hosted the U.S. Army for the successful Preliminary Design Review (PDR) of the T901-GE-900 engine in early March. The T901 is GE Aviation’s engine for the Improved Turbine Engine Program (ITEP), the U.S. Army’s undertaking to re-engine its Boeing AH-64 Apache and Sikorsky UH-60 Black Hawk helicopters. The PDR is a major milestone within the Technology Maturation and Risk Reduction (TMRR) contract, a $102 million, 24-month contract the Army awarded GE in September 2016. The Army is in the process of down-selecting to one engine manufacturer for the Engineering and Manufacturing Development (EMD) phase by the end of 2018. The U.S. Army Contracting Command (ACC), based at Redstone Arsenal in Huntsville, Alabama, released its request for proposals for the EMD last November. GE Aviation submitted the first phase of the proposal in February and is currently preparing the sec-
ce es ace ans
rce d a uire nch ding siangine hat ally
ials plan able the ased 017 est. sal $5.5 orce ment, of $250 4.5 iscal est.
fully fund the evolved expandable launch vehicle program, t payloads into orbit, said Winston Beauchamp, deputy y of the Air Force for space.
serve our ability to access space [while] investing in an oduced launch capability,” he said. “This serves not only o replenish space assets as they reach end of life, but also capabilities and reconstitute our forces.”
up said. “Then efforts of that tech ondthat andindustrial final phasebase,” of itsTeague proposal The take T901theincorporates additive maturation andconfiguration be able to have it manufacturing, explore or support any and alldebased on thework engine 3D aerodynamic competitor launch service providers who would be able to take reviewed at the PDR. sign tools, ceramic matrixadvantage composites of those key technologies, and provide it in supportadvanced of a rocket propulsion (CMCs), cooling technologies, and sand tolerant technologies. system or engine … That engine work then helps transport transitions GE Aviation successfully completed GE development.” has spent decades developing and thewhich Armyisthis past system toa fit ourtest nextwith step, a launch December using a full-scale engine
maturing these technologies in its com-
and awarded military engines businesses. SpaceX ATK Launch that Systems recently contracts to mockup.and It demonstrated the weremercial T901 engine withsystem the prototypes. For now, the Air Force develop rocketintegrates propulsion GE’s T901 turboshaft design, manApache and Black Hawk airframes. says ULA needs to continue using the RD-180. ufacturing, assembly, and testing
e increased between Washington and Moscow, Congress GE’s experience in powering these will be supported by the following e Defense Department to stop using Russian-built aircraft missions with the T700 engine throughoutRDthe past“We’re four decades informedthis its transition develtryinghas to manage period until we get theMassachusetts; new family site locations: Lynn, ines asopment soon asofpossible. engines the power the T901;The it positions Armythe andUnited GE to makenext-generation a smooth transition the systems T700 of from launch certified and able to support Huntsville, Alabama; Newark,our DeltoVthe T901. which are part of the EELV program. e’s Atlas rocket, requirement,” Teague said. “Until that happens, and in orderFlorida; to promote aware; Jacksonville, Loves venture between Boeing and Lockheed Martin. Park, Illinois; Madisonville, competition, ULA would need to have access to the RD-180 engine Kento
GE has invested more than $9 billion in maturing commercial technologies applicable to the tucky; Muskegon, Hookset, be able to competitively compete with SpaceX and theirMichigan; Falcon 9. And g diligently … [but] there’sand a lot T901 towards and morethat thanobjective $300 million to develop test turboshaft-specific technologies ahead New Hampshire; Asheville, North the direction is we’re going to get off RD-180 now and we will have of [U.S.] the PDR. GE funded successfully completed prototype engine, as well done by industry,” saidand Maj. Gen. Roger Teague,testingsoaifT901 West Chester andengines, Evendale, no further access or authorization to useCarolina; any additional RD-180 as component ce programs in the tests. office of the assistant secretary for Ohio; and Rutland, Vermont. then we’re going to have to look at a different strategy to be able to satisfy o get off of that [RD-180] engine it’s important that first A Z Manufacturing Rocky Mountain • 29 May / June 2018 our launch manifest requirement until those new entrants are satisfied.” ical industrial base build itself up back up and restore 2
Heppner BOURQUE
TELL YOUR MANUFACTURING STORY BROCHURES WEBSITES VIDEO PHOTOGRAPHY heppnerandbourque.com | 303-675-0105
Marketing Doesn’t Have To Be A Four-Letter Word A2Z Manufacturing Magazines has invited Heppner + Bourque to provide a series of articles to help demystify marketing and advertising from the point of view of manufacturers. The articles will explain how to affordably market your business, by properly prioritizing your marketing options, crafting a compelling message, and getting that message in front of the right people. We will show that good marketing does not need to be expensive, baffling or frightening. Heppner + Bourque is a creative team specializing in the production of sales and marketing materials for manufacturing, technology and industry. Lisa Heppner and JC Bourque have over six decades of combined experience in copywriting, graphic design, photography and video production.
Smaller Budgets— The smaller your marketing budget, the less tolerance for waste. Getting a well-crafted message in front of the right audience requires marketing experience— not simply artistic talent. If you miss the mark on prioritizing, messaging or strategy, precious marketing resources can be wasted and your marketing may need to go on hold until the next period. It doesn’t have to be this way. After decades of experience in the marketing field, here’s how I define marketing: The process of getting an accurate and compelling message about your product or service in front of people who have the interest and the capacity to buy it, while minimizing exposure to people who don’t. Although it sounds simple, it is often complicated by the staggering number of options in the current media landscape: print, web, direct mail, email, social media, video and blogging. In the next installment, we’ll learn how to prioritize these choices and apply your marketing resources in the places they are most likely to succeed.
JC Bourque, Partner, Heppner + Bourque
What is marketing? Ask a roomful of people and you’ll get two roomfuls of answers, many which would convince any sane businessperson to run for the exit with a firm grasp on their wallet. Being skeptical of the value of marketing is understandable, because it’s all too easy to waste time and resources while failing to achieve results. There are reasons for this: A2Z Manufacturing Rocky Mountain •
Lack of marketing talent in the manufacturing sector— Experienced advertising agencies tend to seek big manufacturing firms that have large annual budgets and in-house marketing directors.These big agencies have large staffs and high overhead, and need high-volume clients to operate. This leaves the mid-sized and small manufacturing companies with the choice of using less-experienced freelancers, to try to DIY their marketing or to avoid the subject entirely.
30 • May / June
2018
Heppner & Bourque has teamed with A2Z publications to offer its readers an affordable option for marketing and creative services. Our company strives to provide our clients with a no-nonsense, jargon-free working experience, becoming a trusted advisor with the goal of helping you strengthen your company’s image, message, and selling potential. Give us a call at 303/675-0105 or visit our website at heppnerandbourque.com
SCRAP PICK-UP SPECIALISTS
Call us first for FREE containers
We set containers for: • Machine, welding & fab shops • Manufacturing facilities • Demolition projects • One-time clean-ups • Containers: 1 to 60 yards • Flatbed, cargo trailers, rolloffs • Small boxes on wheels • Locking Lids • Leakproof boxes
Top prices paid for: • Aluminum • Copper • Brass • Stainless • Steel/Iron • Alloys • Lead & more
Convenient drive-in recycling: • Easy acces from I-25, I-70 and Commerce City ~ • Fully paved • Se Habla Espanol
5555 Franklin St. Denver, CO 80216 www.ironandmetals.com
Call now for up-to-the minute price quotes and market info!
Iron & & Iron Metals,Inc. Inc. Metals,
303•292•5555 1•800•776•7910
Recycling Metals, Conserving Resources, Since 1961 Robots Can Elevate Human Role in Manufacturing Says US Agency Manufacturing in the U.S will build on its current strength by using “technology to empower American potential and ingenuity,” according to the Advanced Robotics for Manufacturing (ARM). The institute, which is a member of Manufacturing USA, a network of regional institutes, looks to robotics to bring about the change. Robotics can “elevate, not eliminate the human roles in manufacturing,” ARM says. The group’s mission is to help train the future workforce for the high-value careers will determine the future of manufacturing.And it focuses on lowering the economic, technical, and operational barriers that companies experience in trying to adopt robotic technology. Wall Street JournalIn the workforce area, it is creating programs to prepare the workforce to work in an Industry 4.0 mindset, collaboratively with robotic solutions in a safe, high-satisfaction environment. Depending on the project, the group impact students at every education stage, from students and young adults to displaced workers. Source: Industry Week
Opportunity Knocks It seems only yesterday the press was writing that in the near future many people would have to seek jobs as software coders. Not to knock coding, but how much more interesting a stronger economy looks today. The Labor Department said that the U.S. economy has arrived at this remarkable juncture:
There were 6.59 million unemployed Americans in March, and the number of jobs waiting to be filled that month was 6.55 million. That is, there are almost as many job openings as job seekers, a near match not seen for many years. The reality is more complicated but still encouraging. A primary reason for unfilled jobs remains the problem of people with deficient or inappropriate skills. We know about the manufacturers who need welders and other skilled craftsmen. But the greatest job growth in March came in business services, with 193,000 openings. Many of these employers are looking for people with presentation skills or the ability to navigate a spreadsheet. Increasingly, employers say that if a person is halfway presentable, they will provide the training, though that is expensive. Ultimately, these skills deficiencies reflect poorly on America’s schools, which often fail to graduate students who can read or write. The good news is the dynamism reflected in the Labor report. Restaurants are looking for workers in part because their employees are leaving for better jobs. Unemployment among low-skilled workers is at historic lows.The current economy is creating that most basic need: opportunity. Source:WSJ A2Z Manufacturing Rocky Mountain •
31 May / June
2018
THE NEXT DIMENSION IN PRECISION MACHINING 3D metal printing + precision machining = • Improved efficiency • Increased durability • Lifetime cost savings On the Cutting Edge...Literally Now with 3D Metal Printing Capabilities
WE ACCEPT YOUR CHALLENGE! 303.420.7422 | www.faustson.com hhosttetter@faustson.com | A Woman-Owned Company
ISO/AS9100 Virtually Simplified! BMSC LLC, A Woman Owned Business! Contact Bretta Kelly Today!
602-445-9400 • www.BusinessMSC.com
You Have 3 Very Good Reasons To Call BMSC: √ Are You Ready To Simplify Your ISO9001 and/or Your AS9100 System? √ Are You Certified and Ready To Upgrade Your System To One of The New Standards of ISO9001:2015 and/or AS9100 Revision D? √ Are You Ready To Begin the ISO 9001 and /or AS9100 Certification Process From Scratch or Need Help Maintaining Your Internal Audits or Management Reviews? We Can Help! We Have Helped Over 100 Manufacturing And Service Companies! Call To Learn About Our Templates — From $3500 We Offer Seminars. Call For Our Training Schedules. A2Z Manufacturing Rocky Mountain •
32 • May / June
2018
Polaris Alpha Announces major expansion plans in Colorado Polaris Alpha announced a major expansion of its Colorado offices, which will create 450 new high-paying jobs in Colorado Springs and the Metro Denver region. The expansion will happen in two phases over the next eight years. The first portion will focus on the company’s facilities in Metro Denver, where Polaris Alpha will build a new 20,000-square-foot office.Through the first phase, 150 new jobs will be created at the Metro Denver location. The second phase will see the expansion of Polaris Alpha’s Colorado Springs facilities. The company plans to expand those offices with an additional 80,000 square feet of new space, and will hire 300 more employees in the Springs by 2026. Polaris Alpha is a leading provider of mission-critical technology, software and solutions to the defense and intelligence communities. The plans are the culmination of efforts by both the Colorado Springs Chamber & EDC and the Metro Denver Economic Development Corporation in obtaining state tax credits and job incentives to help facilitate Polaris Alpha’s expansion, according to the release. “The two organizations worked together to secure a Colorado Job Growth Incentive Tax Credit from the State of Colorado that will assist in Polaris Alpha’s recruiting efforts to fill its job openings,” the release said. “It will also enable Polaris Alpha to execute a multi-pronged advertising campaign to generate interest from potential employees in both the Denver region and Colorado Springs.” Tammy Fields, chief economic development officer for the Colorado Springs Chamber & EDC, said Polaris Alpha plays a crucial and foundational role in the defense and technology industries of Colorado Springs and the surrounding region. “The Chamber & EDC is pleased we could help secure this long-term commitment,” she said in the release. “This announcement further validates Colorado Springs as a technology powerhouse and helps ensure a robust business climate for years to come.” In both locations, Polaris Alpha will be looking to hire software engineers, systems engineers, space scientists, cloud enterprise architects, machine learning specialists and other IT professionals.Those applicants with security clearances will be at a distinct advantage since much of the work performed by the company is for agencies within the U.S. Intelligence Community. Polaris Alpha, with dual headquarters in Colorado Springs and Fredericksburg, Va., is also expanding in other parts of the U.S. as well. The company is currently looking to fill a number of similar positions at its offices in several East Coast locations. Last month, Polaris Alpha announced it had been awarded $96 million in U.S. Air Force task orders on contracts involving work software development, maintenance and enhancement for Command, Control, Intelligence and Surveillance, and Reconnaissance operations.
Gears And Gearboxes For Every Industry
Machinists Inc. is one of the largest and most diverse gear manufacturing companies in North America. We service a wide spectrum of industries, including power generation, mining, timber products, wind, construction, oil and gas, steel, marine, aerospace, and many more. MI is able to cut gears to 250 inches in diameter and grind gears to 102 inches in diameter. Our wide range of machinery includes CNC gear grinders, CNC gear shapers, CNC gear hobbing machines, and Maag gear shapers. We have a large selection of modern CNC equipment including lathes, cylindrical grinders, and multiaxis vertical boring mills.
life of many chronically ill gearboxes by analyzing existing components and providing better gears and bearings. We are also skilled at saving existing components and refurbishing parts when possible, resulting in significant savings for our customers.
MI operates a full service gearbox repair and test center dedicated to the dependable overhaul and enhancement of gear drives.We service most gearboxes regardless of original manufacturer. MI is able to improve existing gear drives. We have greatly increased the horsepower capacities and service
When necessary, we also assist in redesigning customers’ gear trains using modern engineering tools, current design standards, and state-of-the-art manufacturing technologies. If there is a need for precision gears and power transmission services. MI is able to not just fix, but improve complex gear drives. Call the precision gear machining experts at Machinists for reliable handling of your project. http://www.machinistsinc.com/blog/gear-box-repair-putsstate-of-the-art-oil-tanker-back-in-business/ A2Z Manufacturing Rocky Mountain •
33 May / June
2018
Lifetime Products Mold Shop Just Invested In a High Technology, Large Capacity Mazak FJV-60/120E VMC and Sees Huge Gains in Productivity In one of the 22 large industrial buildings at the Freepor t Center that Lifetime Products occupies, is a small group of engineers and machinists who design and manufacture nearly all of the molds utilized to build Lifetime Product’s entire product portfolio. Kelly Martinez, long-ter m employee of Lifetime Products and Machine Shop Director, manages the entity. Kelly says that his team builds approximately 50 molds per year, and they use outside mold builders for a small amount of overflow work, but most are built in-house. Products manufactured by Lifetime Products typically require multiple molds. For example, the kayak pictured (a Hydros 8’6” Sit-On-Top kayak) has a cavity and a core; these are the primary molds but the kayak mold will have additional parts to them, such as the inserts, rail, cylinders, and bolts. The sheds they build require 10-12 molds to provide each component for assembly, Kelly shared. Molds were taking about 11 weeks to build, on average, and in their early stages of developments they often require revisions. Charles Monsen, long-term employee and Mold Designer/ CNC programmer, says, “About 70% of our molds require revisions due to feature modifications.” Lifetime Product’s mold shop is run like a standalone business, the team says, and it must be competitive with outside mold shops to retain Lifetime Products’ business. Kelly says, “We can design and manufacture our molds for about 15% less than they can be done by outside suppliers, and we can also turn modifications much faster than an outside entity.” The molds start with solid material that is generally quite large (>10,000 lbs.), so most machine shops do not have machines with the weight capacity nor the travels needed to manufacture these molds.The kayak pictured, for example, will start with a block of material that weighs in excess of 11,000 pounds prior to being machined. More than a year ago, the company made the decision to upgrade their machine shop productivity and capability. Randy Macari, CNC Programmer, says, “We did a substantial amount of research prior to making our latest purchase. We looked at probably 5 different machine tool builders, and since these large machines are not common, we traveled to meet companies who had the machines we were evaluating.” He continued, “One of our most surprising findings in this research was that you cannot take the specifications provided by the manufacturer alone, and make the assumption, that because some specs are higher, that the overall performance of the machine is better too. In the case of many manufacturers’ spec sheets, we found that some quoted ‘best case’ scenarios, where as other manufactures were more conservative.” The team at Lifetime’s mold shop utilized test runs on samples of A2Z Manufacturing Rocky Mountain •
34 • May / June
2018
their own products to determine the machine that best fit their requirements. The team ran more than 50 test cuts between in-house machinery and multiple machine tool vendors. Most test cuts were performed on smaller machinery because larger bridge-frame equipment is not normally kept in-stock by machine tool vendors due to their size and enormity of investment. However, the smaller machines would serve as a representation of the performance of the larger machines. The best they achieved in-house was 63 minutes. Mazak was the top performer with 30 minutes of run time and a better surface finish. Ultimately, the Lifetime team selected the Mazak FJV-60/120E, which is a high-precision, high-productivity, double-column vertical machining center with enhanced spindle performance, the latest in CNC technology and rigid machine construction, specifically with regard to “Y” axis support. Its design ensures extremely high-precision machining over extended periods of operation by eliminating the spindle overhang that is a big concern with traditional C-frame vertical machining centers. Furthermore, its ergonomic design ensures convenient loading/unloading of very large work pieces and overall ease of operation. The table is also 100% supported by the massive base, over the entire travel. While all expected an improvement on the inhouse cycle time proportionate to the test cuts, there was no sure way to tell exactly what the cycle time on the newly purchased Mazak FJV-60/120Ewould be until another test cut was completed after the machine’s arrival. Everyone expected the larger and final equipment to move slower than the smaller machines, consequentially setting estimations of the cycle-time on the new machine to be closer to 40 minutes. With Lifetime’s new Mazak, these same test cuts took only 29 minutes and 45 seconds, entirely blowing away everyone’s predictions and setting the new record for the test cut! Not only was FJV-60/120E the top performer, but it was also proven to be designed
with power and speed proportionate to the capacity it was meant to handle. Randy says, “Since installing and utilizing the Mazak FJV-60/120E for 6 weeks now, the results are far better than we even expected. Here are some comparisons:
Our Kayak core took 175 hours to build and 14 hours to polish with our old e r m ac h in e (not a Mazak) and now takes 100 hours to build and 1 hour to polish (75% and 1300% faster) Our Shed cores took 243 hours to build and 30 hours to polish with our older machine (not a Mazak) and now takes 117 hours to build and 17 hours to polish (108% and 76% faster) Our Shed Floor cavity took 101 hours to build and 50 hours to polish with our older machine (not a Mazak) and now takes 17 hours to build and 30 hours to polish (494% and 67% faster)” Charles says, “You get what you pay for, and the Mazak is just so much faster than the machines we used prior to our purchase.” He adds, “With the Mazak FJV-60/120E, we are seeing better finishes, so there’s significantly less sanding and polishing, and we are reducing our electricity consumption. Due to the rigidity of the machine, our tool life is much better!” The team says that the Mazak is most impressive for heavy cutting. One example: Randy says, “We previously ran a 1-1/2” Kennametal inserted Mill-1 cutter at 6000RPM at 100IPM feed rate and .100” DOC when we were rouging a mold. Now we run the same cutter on the Mazak FJV at 8000RPM at 236IPM feed rate and .300” DOC.” Kelly says, “In our new machine tool purchase plan for mold making, we were looking for high speed, extreme rigidity, and an overall reduction in the cost of making our products.” With the purchase of their Mazak FJV-60/120E, the machine has a “Bridge-Frame” design that supports long “Y” travel (this model travels are X=120”, Y=55” & Z=26”). This additional “Y” travel has allowed the crew at Lifetime to cut set up time in-half, on a number of molds, that would have otherwise required multiple set ups. It is also equipped with an 18,000RPM spindle, 1000psi coolant, dual belt chip conveyor with a filtration system, an X-Large coolant tank, and the latest ‘MAZATROL SmoothG’ control, which comes standard on the machine. The MAZATROL SmoothG is an advanced CNC super powerful processing of data and incorporates a wide variety of advanced programming functions that make it easy to operate and ensure high-speed, high-accuracy machining performance. Functions Include: √ High Gain Feed Forward Control boosts machining speed and accuracy √ Variable Acceleration Control calculates and applies optimal acceleration for a combination of axes √ Smooth Corner Control makes cutter path adjustments to help shorten cycle times while holding accuracy
√ Rapid Over Lap increases the speed and smoothness in which the machine rapids to reduce non-cut time √ Smooth Machine Configuration optimizes and allows fine tuning of the machine for different machining styles
The Lifetime team is so pleased with their Mazak FJV-60/120E, that after just 6 weeks of production, they ordered a 2nd machine! The Lifetime products team had been purchasing Mazak machines from Smith Machinery for many years now (since 1991), so they knew Mazak was a premier machine and they knew they would get great performance with a Mazak.They are also very familiar with the combination of Smith Machinery/ Mazak service; Charles says one word describes it, ‘Outstanding’. Both Mazak FJV machines were purchased with support from David Soares, Sales Engineer for Smith Machinery. David and the Smith Machinery team worked with Lifetime Products throughout the testing and the decision making process. David values the opportunity he has to work with the Lifetime team. Together with Kelly Martinez and Dennis Norman, they visited Yamazaki Mazak in Japan, and toured the five factories there.They also were able to meet with the Yamazaki family. Mazak is a privately held family-business that will be celebrating its 100th year in business in 2019! The fact that their name is on every one of their machines means a lot to them, insomuch that they support every Mazak for its life, and ensure that they are built of the upmost quality and leading technology. Go to Lifetime.com to learn about all of Lifetime Products’ offerings.Their products can be purchased at sporting goods stores, large retail stores, and online. To learn more about Smith Machinery’s fine line of precision machines, contact them at (801) 263-6403 or visit SmithMachineTools.com A2Z Manufacturing Rocky Mountain •
35 May / June
2018
DoD Awards L3 Technologies, Salt Lake City, Utah, has been awarded a $9,186,145 firm-fixed-price contract for unmanned aerial vehicle spare parts. This is a 31-month contract with no option periods. This was a sole-source acquisition using justification 10 U.S. Code 2304(c)(1), as stated in Federal Acquisition Regulation 6.302-1. Location of performance is Utah, with a Dec. 28, 2020, performance completion date. Using military service is Navy. Type of appropriation is fiscal 2017 through 2018 Navy aircraft procurement funds.The contracting activity is the Defense Logistics Agency Aviation. Diversified Maintenance Systems Inc., Sandy, Utah, is awarded a maximum amount $15,000,000 indefinite-delivery/indefinite-quantity contract for electrical alterations, renovations, and repair projects at Naval Base San Diego. The work to be performed provides for primarily design-bid-build (fully designed) task orders or task orders with minimal design effort (e.g., shop drawings). Projects may include, but are not limited to, alterations, repairs, and construction of fiber optic cable systems, alarm systems, lighting systems, and audio equipment installation. This contract was competitively procured via the Navy Electronic Commerce Online website, with four proposals received. The Naval Facilities Engineering Commandis the contracting activity.
Spindles for All Aerospace Applications Aluminum, Composite & Titanium Machining
GMN USA has it all!
GMN spindles for OEM & retrofit applications Repair/Service for GMN & most other makes and models Spindle support systems Manufacturing & servicing spindles for over 85 years
181 Business Park Drive Bristol, CT 06010 800-686-1679 info@gmnusa.com www.gmnusa.com A2Z Manufacturing Rocky Mountain •
36 • May / June
2018
L-3 CommunicationsWest, Salt Lake City, Utah, is awarded $8,833,750 for firm-fixed-price delivery order N0042118F0255 against a previously issued basic ordering agreement. This delivery order is for the procurement of three tactical common data link maritime shipboard terminals for littoral combat ships (LCS-25, LCS-26 and LCS-28) in support of surface aviation interoperability lab. Work will be performed in Salt Lake City, Utah, and is expected to be completed in November 2019. Fiscal 2016 and 2017 ship conversion (Navy) funds in the amount of $8,833,750 will be obligated at time of award, none of which will expire at the end of the fiscal year. The Naval Air Warfare Center Aircraft Division is the contracting activity. United Launch Services LLC, Centennial, Colorado, has been awarded an $18,866,842 modification (P00192) to previously awarded contract FA8811-13-C-0003 for Evolved Expendable Launch Vehicle (EELV) Phase 1. This modification provides for an increase in the mission resiliency for a launch vehicle configuration that had been previously ordered under the EELV contract, and brings the total cumulative face value of the contract to $8,853,675,400. Work will be performed in Centennial, Colorado; Decatur, Alabama; and Cape Canaveral Air Station, Florida, and is expected to be complete by Sept. 30, 2019. Fiscal 2018 space procurement funds in the amount of $18,866,624 are being obligated at the time of award. Vectrus Systems Corp., Colorado Springs, Colorado, has been awarded an $84,013,651 firm-fixed-price contract for the acquisition of base maintenance support services. This contract provides for support for four functional areas installation management, operations and maintenance, installation engineering, and emergency management. This award is the result of a competitive acquisitions and four offers were received. Fiscal 2018 operations and maintenance funds in the amount of $106,912 are being obligated at time of award.The 338th Specialized Contracting Squadron, Joint Base San Antonio,Texas, is the contracting activity (FA3002-18-C-0003).
WHEN TO CONVERT MACHINING TO DIE CASTING TVT Die Casting is experienced in manufacturing aluminum and zinc die cast component parts, precision CNC machining, proto- typing and custom finishing. TVT provides finished components for your assembly line to meet your exacting specifications, and on- time delivery requirements.
For Competitive Quote / 503-639-3850 www.tvtdiecast.com
TVT provides engineering and material advice to help you design a part that can maximize the benefits of the die casting process, in terms of manufacturability, strength and functionality. TVT engineers can provide mold design to produce your casting based on a 3Dmodel, as well as optimize productivity for machining operations. TVT can provide a variety of finishes to meet your requirements: raw castings, precision-machined castings or completely finished castings ready for your assembly. For over 40 years,TVT has developed many areas of manufacturing optimizations and innovations, standing out as a true partner in the following areas: Custom Delivery Schedule TVT can integrate their produc- tion and delivery schedule to meet your delivery requirements. Whether it’s Just-in-time, KanBan, or dock-tostock, tell them what you need and TVT can deliver. Short-Run, Medium Volume TVT identifies with your need for low, medium or high volume, high tolerance, finished castings for many OEM’s and partnering companies. Demanding Specifications TVT is experienced in meeting a wide variety of the most stringent specifications for military, medical,
Machined and Anodized
Die Cast, Machined and Anodized
Converting from Machining to Die Casting Saves
Price
Time
Setup
Waste
dental, electronics, and transportation industries. Aluminum and Zinc Enclosures Over the years, TVT has excelled in producing specially designed and finished castings. TVT’s experience ranges from producing parts to maximize near-net-shape, minimize machining and combine several parts to reduce assembly requirements. Castings are high strength and light weight with structural rigidity, and even produces excellent EMI/ RFI shielded. In addition to being ISO 9001:2008 certified, and in 2018AS9100 certified, TVT’s Quality Assurance Program has advanced in-process inspection, statistical process control and CMM capabilities to ensure accuracy and precision.
Contact TVT Die Casting today: 503.639.3850, 800.280.2278 Sales@tvtdiecast.com • tvtdiecast.com A2Z Manufacturing Rocky Mountain •
37 May / June 2018 63 • Jan / Feb 2018
A2Z MANUFACTURING SW •
OIL MIST AND SMOKE IN YOUR SHOP? Low-Cost, Highly Efficient Mist and Smoke Collectors Designed Specifically for the Metalworking Industry www.mistcollectors.com 1-800-645-4174
U.S. Army Scoping Out Potential Future Apache
service into the 2040s and possibly the 2060s.
The U.S. Army is gathering potential requirements for another evolution of the Boeing AH-64 Apache attack helicopter, which is now expected to remain in
The possible improvements are being grouped into two categories of engineering change proposal (ECP): upgrades that could be incorporated relatively easily into the current AH-64E, and major changes that would require helicopters to return to the depot, says Rich Tyler, the Army’s Apache deputy program manager. Topping the list of major changes is re-engining with the 3,000-shp Improved Turbine Engine, but the array of potential upgrades includes adding a propulsor and compounding wing to increase the helicopter’s performance. Also listed are sensor and survivability upgrades and an advanced cockpit and flight controls.
We s t e r n S t a t e s M e t a l s
We pr i de ou rs e l ve s o n o ur se r v ice a n d q ua li t y p rod uc t s
We s tWe e r ns t eSrtna tSet ast eMs eMt eatl as l s We pr i d e ou r s el ve s o n ou r se r vice an d q ualit y p ro du c ts
We p r i d e o urs e lve s o n o u r se r vice an d q ua lit y p ro du c t s
Copper Alloys
We s t e r n S t a t e s M e t a l s
C-46400 Naval Brass C-10100 OFHC C-51000 Phoshpor Bronze C-11000 (C110 CU-ETP) We pr id e ou r se l ves o n o ur s e r vi ce an d qualit y prod uc ts C-62400 Aluminum Bronze C-14500 Tellurium Copper C-63000 Aluminum Bronze C-17200 We pn id ur o n o ur sPlate er vaice qua lit Tubes • rSolid Plate We p r i d e ou r s eBeryllium l ve s oCopper o eu ro•Tubes sWear es el r vves ice a n d q uNickle l i t yan pd ro du cytps ro duc t s • Solid • Wear C-63020 Nickle Aluminum Bronze C-18000 Copper Chromium Nickle Silicon C-64200 Silicon Aluminum Bronze C-18200 Chromium Copper C-10100 OFHC C-46400 Naval Brass C-46400 Naval BrassC-36000 Free Machining Brass C-65500 Silicon Bronze We pr id e o uC-51000 rse lvePhoshpor s o n o ur ser vice and qua lit y p ro duc ts Bronze C-11000 (C110 CU-ETP) C-67500 Manganese Bronze C-51000 Phoshpor Bronze
We s t eSrCast nWe Ststte ae srtne Bronze sM allesst a l s Bronze S t aM tBar eetsta M Cast Bar We s t e r n t a e pper Alloys Copper Alloys p r i de r vand ice quality alit y prod uc ts WeWe pride onSs our Weourselves sour t e se r nlve tona toservice eursseM e t aand l s quproducts
Cast s t e rCast n S t aBronze tes M eBar tBronze aBronze l s Bar Copper Alloys We CastBar Bar CopperCopper AlloysAlloys Copper Alloys Cast Bronze
TP) C-62400 Aluminum Bronze C-14500 TelluriumC-62400 Copper Aluminum Bronze Tubes • Solid • Wear Plate opper We Aluminum pr id e o uBronze rs el veTubes s on • ou r s er v icePlate a n d q ua l it y p rod uc ts Solid • Wear C-63000 Nickle C-17200 Beryllium Copper C-18000 Copper C-10100 OFHC C-63000 Chromium Nickle AluminumC-10100 Bronze Tubes • Solid • Wear Plate opper C-18000 Nickle Aluminum Bronze C-46400 Naval Brass Tubes • Solid • Wear Plate OFHC Copper Chromium Nickle Silicon C-63020 C-51000 Phoshpor Bronze C-11000 (C110 CU-ETP) C-63020 Nickle Aluminum Bronze Nickel Silicon C-63020 Nickel Bronze omium Nickle Silicon C-64200 Silicon Aluminum BronzeAluminum C-62400 Aluminum Bronze C-14500 Tellurium Copper OFHC C-18200 Chromium CopperC-46400 Naval Brass Tubes • Solid • Wear Plate Nickle Aluminum Bronze C-46400 Naval Brass C-64200 Silicon Aluminum Bronze C-65500 Silicon Bronze C-63000 C-10100 OFHC Copper C-17200 Beryllium Copper CC-46400 -36000 Free Machining Brass Naval Brass C-65500 Silicon Bronze C-51000 Phoshpor Bronze (C110 CU-ETP) Tubes Solid • Wear C-63020• Nickle Aluminum Bronze Plate C-51000 Bronze C-18000Phoshpor Copper Chromium Nickle Silicon C-67500 Manganese Bronze C-11000 (C110 CU-ETP) C-65500 C-62400 Silicon Bronze BrassCopper Aluminum Bronze C-64200 Silicon Aluminum Bronze C-18200 Chromium Copper C-46400 Naval Brass 0ning Tellurium C-10100 OFHC C-62400 Aluminum BronzePhoshpor C-11000 (C110 CU -Phoshpor ETP) C-51000 Bronze Tubes • Solid • Wear Plate C-14500 Tellurium Copper C-65500 Silicon Bronze C-67500 Manganese Bronze C-36000 Free Machining Brass C-51000 Bronze C-11000 (C110 CU-ETP) C-63000 Nickle Aluminum Bronze 0 Beryllium Copper C-63000 Nickle Aluminum Bronze C-67500 Manganese Bronze C-17200 Beryllium Copper C-86300 Mangunese Bronze C-62400 Aluminum Bronze C-14500 Tellurium Copper Tellurium C-14500 Copper C-62400 Aluminum Bronze C-63020 Nickle Aluminum Bronze C-63020 Aluminum C-46400 Naval Brass C-46400 Naval Brass Bronze 0 Copper Nickle Silicon C-18000 Copper Chromium Nickle Silicon C-63000 Nickle Aluminum Bronze Nickle C-10100 OFHC C-17200Chromium Beryllium Copper C-89835 Lead Free Bronze C-86300 Mangunese Bronze C-51000 Phoshpor Bronze C-64200 Aluminum Bronze C-63020 NickleSilicon Aluminum Bronze Silicon C-11000 (C110Copper CU-ETP) C-64200 Aluminum Bronze C-86300 Mangunese C-17200 Beryllium C-63000 Nickle Aluminum Bronze C-18000 Copper Chromium Nickle Silicon C-18200 Chromium Copper C-86300 Mangunese Bronze 0P)Chromium Copper C-51000 Phoshpor Bronze C-89835 Lead FreeBronze Bronze C-93200 (SAE660) C-62400 Aluminum Bronze C-64200 Silicon AluminumCBronze C-14500 Tellurium Copper C-18200 Chromium Copper -65500 Silicon Bronze C-36000 MachiningAluminum Brass C -65500 Silicon Bronze C-63000 Nickle Aluminum Bronze C-93200 (SAE660) Bronze 0pper Free Machining BrassFreeC-62400 Bronze C-89835 Lead Free Bronze Bronze C-65500 Silicon Bronze C-17200 Beryllium Copper C-18200 Copper C-36000 Free Machining Brass C-95400 Aluminum Bronze C-36000 Free Machining BrassChromium C-67500 Manganese C-95400 Aluminum Bronze C-63020 NickleBronze Aluminum Bronze C-67500 Manganese Bronze C-67500 Manganese Bronze C-18000 Copper Chromium Nickle Silicon C-93200 Bronze C-63000 Nickle Aluminum Bronze C-95510 Nickle C-95510 Nickle AlumninumBronze Bronze C-89835 Lead(SAE660) FreeAlumninum Bronze pper C-64200 Silicon Aluminum Bronze C-18200Aluminum Chromium Copper C-64200 Silicon Bronze SAE841Oilite Oilite C-65500 Silicon Bronze SAE841 C-86300 Mangunese Bronze C-86300 Mangunese C-95400 AluminumBronze Bronze C-36000 Free Machining Brass Nickle Aluminum Bronze omium Nickle Silicon C-63020 C-93200 (SAE660) Bronze C-86300 Mangunese Bronze C-67500 Manganese Bronze C-89835 Lead Free Bronze C-89835 Lead Free Bronze C-95510 Nickle Alumninum Bronze C-64200 Silicon Aluminum Bronze C-93200 (SAE660) Bronze opper C-89835 Lead(SAE660) Free Bronze C-93200 Bronze C-95510 Nickel Aluminum C-86300 Mangunese Bronze SAE841 C-95400 Aluminum Bronze Oilite C-65500 Silicon Bronze ing Brass C-93200 Bronze C-95400 Aluminum Bronze C-89835 Lead Free(SAE660) Bronze C-95510 Nickle Alumninum Bronze Bronze C-67500 Manganese Bronze C-93200 (SAE660) Bronze Service C-93200 Cast Bronze Your One Stop SAE841 Oilite C-95510 Nickle Alumninum Bronze Center C-95400 Aluminum Bronze
Copper Alloys pper Alloys Copper Alloys
Cast Bronze Cast Bar Bronze Bar Cast Bronze Bar
Bronze Bushings
The requirements-gathering exercise is aimed at both upgrades to the AH-64E in fiscal 2019-2024 and a notional “Future Apache” that could be Cast Bronze Bar developed inPlate fiscal 2021-25 and produced in fiscal 2025-2035. But there Tubes • Solid • Wear is not yet any formal requirement or program for an improved Apache, cautions Tyler, speaking on the sidelines of AHS International’s Forum 74 convention here on May 15. Potential ECPs that could be incorporated into the AH-64E without C-86300 Mangunese Bronze depot-level remanufacturing include composite tail, modernized cockpit, C-89835 Lead Free Bronze C-93200 (SAE660) Bronze improved avionics and new armament options including directed-energy C-95400 Aluminum Bronze C-95510 Nickle Alumninum Bronze SAE841flight-tested Oilite weapons.The Army has already a Raytheon high-energy laser pod on the Apache.
SAME DAY SHIPPING
Bronze Your One Stop Service Center Bronze Bushings SAME DAY SHIPPING The possibility of a Future Apache has likely increased with the apparent Bronze Bushings Bronze SAME DAY SHIPPING Bronze removal of the Army’s attack mission from the Future Vertical Lift (FVL) SAE841 Oilite SAE841 Powder Metal Bearings C-95400 Aluminum Bronze SAE841 Oilite C-95510 Nickle Alumninum Bronze C-95510 Nickle Alumninum Bronze Oilite SAE841Bronze Oilite C-86300 SAE841 Mangunese
Chrome Plated Bars
Your One Stop Service Center Brushings Chrome Plated Bars SAME DAY SHIPPING Bushings Bronze SAME DAY SHIPPING Bushings Bronze Capability Set 3 (CS3). CS3 is now described as a medium assault/utility SAME DAY SHIPPING BronzeBushings Your One Stop Service Center SAME DAY SHIPPING Your SAME One Stop Service Center Bushings Your DAY SHIPPING One Stop Service Center Chrome Plated Bars rotorcraft, primarily intended to replace the Army’s Sikorsky UH-60M C-93200 Cast BronzeBushings YourOne One Stop Service Center Stop Service Center DAY SHIPPING Chrome Plated SAME BarsYour Pre-Honed Cylinder Tubing SAE841 Powder Metal Bearings Chrome Plated Bars Cast Iron Pre-Honed Tubing beginning in 2034. andCylinder V Black Hawks Your One Stop Service Center Custom Machined Bushings Chrome Plated Bars 75k-100k - Induction Hardened Cast Iron Chrome Plated Bars Chrome Plated Bars Bronze Special Oil Grooves (in-house) Stainless Steel Standard & Metric Sizes Pre-Honed CylinderPre-Honed Tubing NEW Cylinder Centrifugally Cast Tubes Tubing Cut to Length Chrome Plated Bars Cast Iron Cast IronBushings Cast Iron SAME DAY TheSteel advanced rotorcraft is also planned to replace the U.S. Marine Corps’ Pre-Honed Cylinder Tubing SHIPPING Stainless C-93200 Cast Bronze Custom Machined Bushings SAE841 Powder Metal Bearings Custom Machined Bushings Special Oil Grooves (in-house) Special Oil Grooves (in-house)
C-93200 Cast Bronze SAE841 Powder Metal Bearings C-93200 Cast Bronze Custom Machined Bushings SAE841 Powder Metal Bearings Custom Machined Bushings Special Oil Grooves (in-house)
75K-100K - Induction Hardened
75K-100K - Induction Hardened C-89835 Lead Free Bronze Standard & Metric Sizes C-93200 (SAE660) Bronze Cut to Length C-95400 Aluminum Bronze 75K-100K - Induction Hardened C-95510 Nickle Alumninum Bronze Standard & Sizes Metric Sizes Standard and Metric Cut To Length SAE841 Oilite Cut to Length
C-93200 Cast Bronze (in-house) t Bronze Special Oil Grooves Standard & Metric Sizes C-93200 Cast Bronze SAE841 Powder Metal Bearings Gray Iron Class 40 Cut to Length Bearings der Metal BearingsSAE841 Powder Metal Custom Machined BushingsDuctile Iron 75K-100K - Induction Hardened Custom Machined Bushings 65-45-12 • 80-55-06 Special Oil Grooves (in-house) - Induction Hardened Standard & Metric Sizes chined C-93200Bushings Cast Bronze 75K-100K75K-100K - Induction Hardened Solids • Tubes • Plates Gray Iron Class 40 Special Oil Grooves (in-house) Cut to Length Standard & Metric Sizes Grooves (in-house) SAE841 Powder Metal Bearings Standard and Metric Sizes Cut To Length Standard & Metric Sizes
Custom Machined Gray Iron Class 40 Bushings Ductile Special OilIron Grooves (in-house) Class 40 IronIron Class 40 65-45-12Gray •Gray 80-55-06 Solids • Tubes • Plates Ductile Iron Iron Gray Iron Class 40 Ductile 65-45-12 • 80-55-06 Ductile Iron 65-45-12 • 80-55-06 65-45-12• 80-55-06 Gray Iron Class 40 Solids • Tubes • Plates • Tubes • Plates Bronze Solids
Ductile Iron 65-45-12 • 80-55-06
Cast Iron
Solids Tubes • Plates Ductile •Iron der Metal Bearings
Standard and Metric Sizes Cut To Length
Cut to Length 300 - 400 Series
Standard Metric Sizes Cut To Length 75K-100Kand - Induction CutHardened to Length
Standard Metric Sizes 6061-T6511 Standard and Metric Sizes Cut To&Length Stainless Steel Pre-Honed Cylinder Tubing Solids • Tubes • Plates Aluminum Your One Stop Service NEW Center Centrifugally Pre-Honed Cylinder Tubing ADDITIONAL CastVenom Tubesin the assault role and AH-1Z in the attack role. But NEW Cut to Length Round Bar - Up To 12” Bell UH-1Y Centrifugally CastStainless Tubes Standard &Cylinder Metric Cut Standard Sizes and Steel Metric Sizesto Cut Length To Length Rectangles, Squares and Plates 300 - 400 Series Pre-Honed Tubing 300 - 400 Series MATERIALS Stainless Steel NEW NEWStandard and Metric Sizes Cut To Length in a presentation here the AH-64 was no longer listed as being replaced Centrifugally Cast Tubes Centrifugally Cast Tubes Available Upon Request Pre-Honed Cylinder Tubing
Cast Iron
on
75K-100K - Induction Hardened Standard & Metric Sizes Cut to Length
AluminumStainless 6061-T6511 Steel Chrome Plated Bars Metal Steel 300 - 400Free SeriesAnti Seize 65-45-12 • 80-55-06 Standard and Metric Sizes CutDepac To Length NEW ADDITIONAL Aluminum 6061-T6511 by FVL CS3. The Army is standing up a team for the smaller CS1, to 75K-100K - Induction Hardened Centrifugally Cast Tubes Centrifugally Cast Tubes MATERIALS Aluminum 6061-T6511 Round Bar - Up To 12” Standard & 300 Metric ADDITIONAL Stainless Steel - 400Sizes Series ADDITIONAL Iron 300-400 Series Rectangles, Squares and Plates Aluminum 6061-T6511 Available Upon Request address the armed scout role, but this is being portrayed as an adjunct Cut to Length ADDITIONAL NEW DepacStainless Steel MATERIALS 12 MATERIALS es • 80-55-06 Metal Free Anti Seize Round Bar - Up To 12” NEWCentrifugally Cast Tubes MATERIALS Tubes • Plates 798 W 1700 S SLC, UT 84104 Aluminum 6061-T6511 Rectangles, Squares and Plates Aluminum 6061-T6511 Available Upon Request Centrifugally Cast Tubes to the AH-64 and not a replacement. ADDITIONAL 300Round - 400 Series MATERIALS Available Upon Request Toll-Free: (800) 378-0562 Bar - Up To 12” Depac Metal Free Anti Seize Pre-Honed Cylinder Tubing Round Bar - Up to 12” 300 - 400 Series Available Upon Request Local: (801) 978-0562 Rectangles, Squares and Plates 798 W 1700 S SLC, UT 84104 Depac Metal Free Anti Seize Standard and Metric Sizes Cut Rectangles, To Length MATERIALS Available Request on Squares and Plates Fax: (801) 978-0623UponToll-Free: (800) 378-0562 Can be used at high pressures and temperatures W 1700 SFree SLC, UT 84104 www.westernstatesmetals.com Local: (801) 978-0562 Depac7986061-T6511 Metal Anti Seize Available Upon Request Aluminum from -60°F up to 2500°F Aluminum 6061-T6511 Can be used at (800) high pressures and temperatures Fax: The Army, meanwhile, is moving ahead on tackling issues with the current ADDITIONAL Toll-Free: 378-0562 798UT W 1700 S (801) SLC,978-0623 UT 84104 798 W 1700 S, SLC, 84104 Depac Metal Free Anti Seize Depac Metal Free Anti Seize Round Bar Up To 12” Round Bar - Up Tofrom 12” -60°F up to 2500°F www.westernstatesmetals.com
ADDITIONAL st Iron
300 - 400 Series
hined Bushings Solids • Tubes • Plates on Class(in-house) 40 ooves
Round Bar - Up To 12” 798 W 1700 S SLC, UT 84104 Rectangles, Squares and Plates
Toll-Free: (800) 378-0562 Local: (801) 978-0562
Can be used at high pressures and temperatures from -60°F up to 2500°F
Round Bar - Up To 12” Rectangles, Squares and Plates
Fax: (801) 978-0623
www.westernstatesmetals.com Can be used at high pressures and temperatures from -60°F up to 2500°F
DDITIONAL Toll-Free: (800) 378-0562 NEW MATERIALS ATERIALS
Can be used at high pressures and temperatures from -60°F up to 2500°F
Stainless Steel Local: (801) 978-0562 Rectangles, Squares and Plates Can be used at high pressure and temps from -60o F up to 2500 oF Fax: (801) 978-0623 Centrifugally Cast Tubes
Toll-Free: (800) 378-0562 798 W 1700 S SLC, UT 84104
s
Toll-Free: (800) 378-0562 Local: (801) 978-0562
Can be used at Squares high pressures and temperatures Rectangles, and Plates from -60°F up to 2500°F
Local: (801) 978-0562 Local: (801) 978-0562 Fax: (801) 978-0623 Available Request 300 - 400 Series www.westernstatesmetals.com ilable UponUpon Request Fax: (801) 978-0623 Fax: (801) 978-0623 www.westernstatesmetals.com DepacMetal MetalFree Free Anti Depac AntiSeize Seize
798 W 1700 S SLC, UTwww.westernstatesmetals.com 84104 Aluminum 6061-T6511 DDITIONAL Toll-Free: (800) 378-0562 A Z Manufacturing Rocky Mountain • 38 • May / June 2018 Local: (801) 978-0562 ATERIALS www.westernstatesmetals.com
798 W 1700 S SLC, UT 84104 Toll-Free: (800) 378-0562
2
Local: (801) 978-0562 Fax: (801) 978-0623
Fax: (801) 978-0623
lable Uponwww.westernstatesmetals.com Request
Can be used at high pressures and temperatures
Can be used at high pressures and temperatures from -60°F up to 2500°F from -60°F up to 2500°F Round Bar - Up To 12” Rectangles, Squares and Plates
AH-64E.These include a new “-11” generator planned to enter production in July to increase mean time between failures. Also in July, the Army plans to begin retrofitting Apaches with a new strap pack, which holds
Annual NUNTMA Golf Tournament
8th
^ƚŽŶĞďƌŝĚŐĞ 'ŽůĨ ůƵď ^ĞƉƚĞŵďĞƌ Ϯϭ͕ ϮϬϭϴ ^ŚŽƚŐƵŶ ^ƚĂƌƚ Ăƚ ϴ D
ΨϱϬͬ'ŽůĨĞƌ /ŶĐůƵĚĞƐ ƌĞĂŬĨĂƐƚ͕ >ƵŶĐŚ͕ ϭϴ ŚŽůĞƐ͕ Ă ĐĂƌƚ ĂŶĚ ƉƌŝnjĞƐ͊ WůĞĂƐĞ Z^sW Ăƚ ŚƚƚƉƐ͗ͬͬŐŽŽ͘ŐůͬĨŽƌŵƐͬŶyǁŚ LJZĚϯhƚǀ 'ZsϮ ďLJ ^ĞƉƚĞŵďĞƌ ϭϬ ŽŶƚĂĐƚ DĂĚĚŝĞ ; ŚĂƉƚĞƌĞdžĞĐΛŶƵŶƚŵĂ͘ŽƌŐͿ ǁŝƚŚ ĂŶLJ ƋƵĞƐƚŝŽŶƐ
&ƵŶĚƌĂŝƐĞƌ ĨŽƌ EhEdD ŚĂƉƚĞƌ͊ Z/E' ^,͊ Z &&> WZ/ ^͕ hE>/D/d Dh>>/' E^͕ E Kd, Z , d^ t/>> s /> > &KZ WhZ , ^ ͊ the main rotor in place. The service is in the process of upgraded all of its AH-64Es to the V4 version, and is now developing the V6. This is planned to be the single common configuration for all U.S. and international AH-64Es—beginning with UK WAH-64Ds, which are to be remanufactured to the E V6 model Aerospace Daily & Defense Report. Vol. 9, No. 6 Nov / Dec 2016
Rocky Mountain Edition (CO, UT, ID, MT and WY)
Maddie Dahl: Helping To Create A Pipeline of Talent For Precision Manufacturing in Utah
NUNTMA Events The Spring Social Which Was Held At Maddox Ranch House In Perry, Utah
Upcoming NUNTMA Events Include: September 21: Golf Tournament
For information on membership and attending the luncheon with Lt. Gov Cox, please contact:
October 11: Chapter Meeting-Attorney (Location Tbd)
A2ZManufacturing.com
Maddie Dahl; NUNTMA Chapter Executive; chapterexec@ NUNTMA.ORG
November 8: Annual Meeting/ Roundtable
December13: Chapter Meeting (Detroit Diesel-Fowler) Pictures shown are taken from past events, including: In March, a meeting with Commissioner Wolstenhulme and in MayA2Z Manufacturing Rocky Mountain •
39 May / June
2018
Manufacturing & Engineering ISO9001: 2008 / AS9100 Revision C Certified
Flex-Pro, LLC, an ISO9001: 2008/ AS9100 Certified company, manufactures highly complex precision machined components. Our manufacturing team has on average 20+ years of manufacturing experience, and our machine tools are state-of-the-art. Call for our superior service and very competitive pricing.
www.FlexProAZ.com 21637 N. 14th Avenue • Phoenix AZ 85027 Phone: (480)773-3239 • (623) 466-6866 www.ramcompany.com Email resume to: HR@RAMCOMPANY.COM
ISM: U.S. Manufacturing Growth to Continue Throughout 2018 The Institute for Supply Management released its Spring 2018 Semiannual Economic Forecast, which showed that expectations for the remainder of 2018 continue to be positive in the manufacturing sectors. Key findings from ISM’s survey of manufacturing executives include: Manufacturing executive respondents forecast 6.6 % revenue growth for 2018 — up 1.5 percentage points from the December 2017 forecast and 2.5 points above the actual revenue growth reported for all of 2017 The 15 industries reporting expectations of growth in revenue for 2018 are: Miscellaneous Manufacturing; Fabricated Metal Products; Transportation Equipment; Plastics & Rubber Products; Petroleum & Coal Products; Electrical Equipment, Appliances & Components; Computer & Electronic Products; Wood Products; Primary Metals; Machinery; Chemical Products; Paper Products; Furniture & Related Products; Food, Beverage & Tobacco Products; and Nonmetallic Mineral Products. Purchasing and supply managers report that their companies are currently operating, on average, an increase from the 82.5 % reported in May 2017 Production capacity in manufacturing is expected to increase 4.9 percent in 2018 — up from the 2.7-percent increase predicted in December 2017 and the 4.3-percent increase reported in December 2017 for all of 2017 Survey respondents expect a 10.1% increase in capital expenditures in 2018 — notably higher than the 2.7%increase predicted in the December 2017 forecast for 2018 In the December 2017 forecast, respondents predicted an increase of 1.3 percent in prices paid during the first four months of 2018; they now report prices actually increased by 4.8 percent
RAM Company Located In St. George, Utah Has Job Openings For Skilled CNC Machinists With 4+ Years Of Experience.
ISM’s Manufacturing Business Survey respondents forecast that manufacturing employment will increase by 1.8 percent by the end of 2018, compared to the end of 2017
Duties will include: Machine parts to specifications using machine tools such as lathes and milling machines. Set up, adjust, and operate all of the basic machine tools to perform precision machining operations.
Increased revenue is expected in 2018 as management executives predict an overall net increase of 6.6 % in sector business revenue for 2018 over 2017 — 2.5 % points higher than the 4.1% increase reported for 2017 over 2016.
Familiar with Geometric Dimensioning and Tolerancing (GD&T) requirements. Recording measurements and other information as part of our ISO9001 and AS9100 quality system requirements. Maintaining a clean, safe work space. Knowledge of general shop operating and safety practices.
Training will be completed on 1st shift (7:00 a.m. – 3:30 p.m., Monday through Friday). Once training is completed you would work 2nd shift (3:30 p.m. - 2:00 a.m., Monday – Thursday.) RAM Company offers full benefits the first of the month following 60 days including Medical, Dental, Life, and Vision Insurance. 8 Paid Holidays per year, and 4 Hours PTO time per month. We offer a 401k plan with company match Pay will be based on experience. A2Z Manufacturing Rocky Mountain •
40 • May / June
2018
Other findings from special questions asked to manufacturing executive panelists: 77.9 percent said their firm has had difficulty hiring workers to fill open positions in the past six months 53.3 percent said their firm has raised wages in the past six months to recruit new hires 47.9 percent said their firm has offered additional training for new hires in the past six months 35.5 percent said in the past six months their firm has increased capital spending plans for the next 12 months 57.5 percent said they believe tariffs will cause delays and disruptions in their supply chain Source: Industrial Distribution; By: Mike Hocket
Buyer’s Guide & Card Gallery Equipment and Services
1165 Prairie Hill Road Rockton, IL 61072 Phone: 815.957.4140 Fax: 815.624.0381 www.chemtool.com
MICHAEL HOWARD Account Manager c | 281.883.8231
e | mhoward@chemtool.com
Von Ruden Manufacturing, Inc. Since 1946
Fluid Power / Mechanical / Tool Products ISO 9001:2008 Certified
Brandon Anderson President
MOBILE: 612.251.0868 E-MAIL: brandon@vonruden.com
DIRECT: 763.682.0322 PHONE: 763.682.3122 FAX: 763.682.3954
1008 First Street NE - PO Box 699 - Buffalo, MN 55313 USA Made in USA
CNC Collet Chucks Royal Products________ 800-645-4174 CNC Lathe Accessories Von Ruden Manufacturing_ 763-682-0322 Collet Fixtures Royal Products________ 800-645-4174 ACCESSORIES Coolant Systems Desert EDM Sales_____ 480-816-6300 Blaser____________ 801-722-4095 Chemtool__________ 815-957-4140 Abrasive Products Barton International_____ 800-741-7756 Hangsterfer’s________ 316-640-2462 Chemtool Inc.________ 815-957-4140 MP Systems_________ 909-282-7463 GMA Garnet_________ 828-243-9300 Qualichem, Inc._______ 480-320-0308 Star Metal Fluids______ 800-367-9966 Bandsaw Blades Coolant Chillers Rocky Mountain Saw Blades__303-761-3000 MP Systems_________ 909-282-7463 Roentgen USA________ 847-787-0135 Cutting Fluids & Oils Trajan Saw Works______ 800-743-9313 Castrol____________ 800-894-7773 Bar Pullers Chemtool__________ 815-957-4140 Accudyne Corp________ 303-991-1500 Hangsterfer’s________ 316-640-2462 Edge Technologies______ 562-597-7824 Hasco Oil__________ 562-595-8491
www.vonruden.com
Driven Tooling for the Machine Tool Industry
Made in USA
Qualichem, Inc._______ 480-320-0308 Star Metal Fluids______ 800-367-9966 Cutting Tools Horizon Carbide Tool___480-968-0957 US Carbide Tool______480-755-3812 Von Ruden Manufacturing_ 763-682-0322 Dielectric Fluid Hangsterfer’s________ 316-640-2462 Dovetail Cutters & Fixtures 5th Axis___________ 858-505-0432 Dust Collectors, Filtration Equip. Castrol ___________ 800-894-7773 Star Metal Fluids______ 800-367-9966 EDM Materials & Supplies Castrol____________ 800-894-7773 Desert EDM Sales_____ 480-816-6300 EDM Network________ 480-836-1782 EDM Perform. Access.____ 800-336-2946 Global EDM Supply_____ 480-836-8330 Star Metal Fluids______ 800-367-9966
EDM: Tooling Systems Desert EDM Sales_____ 480-816-6300 EDM Perform. Access.____ 800-336-2946 Filtermist Mist Collectors Royal Products________ 800-645-4174 Garnet Abrasives Barton International_____ 800-741-7756 Greases Chemtool__________ 815-957-4140 Knives: Replacement Superior Grinding______ 801-487-9700 Laser Accessories Castrol____________ 800-894-7773 Live Centers Royal Products________ 800-645-4174
Division of Curran Manufacturing Corporation
200 Oser Avenue Hauppauge, NY 11788 U.S.A.
Tel:
www.royalprod.com
orders@royalprod.com
41 41
1-631-273-1010 1-800-645-4174 Fax: 1-631-273-1066 1-800-424-2082
A2Z Manufacturing A2Z Manufacturing Rocky Mountain Rocky Mountain • May • / •June May / June 2018 2018
Tel: 800-686-1679 Fax: 860-409-2552181 dloveless@gmnusa.com 65 South Cottonwood Street (300 W) 6577 Salt Lake City, Utah 84107 Sa
Gage-Lab Products G
Don Loveless 181 Bristol Park Dr Bristol, CT 06010 www.gmnusa.com
Dimensional Gaging Specialists
Tim Zimmerman
tz@gagelabproducts.com
phone (801)716-2972 fax
(8 (801)716-2975
c cell
(8 (801)918-8798
www.gagelabproducts.com
FREDERICK C. HUTH serving Northern MT and ID
J.M. GRISLEY MACHINE TOOLS, INC.
STEVE CARLSON
PHONE (801) 486-7519 FAX (8 01) 48 6 - 79 81 DENVER, COLORADO
CELL (303) 720-8760
s c a r l s o n @ j m g r i s l e y. c o m www.jmgrisleymachine.com
Lubricants / Systems Castrol____________ 800-894-7773 Hangsterfer’s________ 316-640-2462 Qualichem, Inc._______ 480-320-0308 Star Metal Fluids______ 800-367-9966 Machine Tool Accessories Von Ruden Manufacturing_ 763-682-0322 Machine Tool Cool. Filtration Castrol____________ 800-894-7773 Hangsterfer’s________ 316-640-2462 Hasco Oil__________ 562-595-8491 Star Metal Fluids______ 800-367-9966 Milling and Turning Products Von Ruden Manufacturing_ 763-682-0322 Parts Washing Equipment Star Metal Fluids______ 800-367-9966 A2Z Manufacturing Rocky Mountain•
R8 Quick Change Tool System Royal Products________ 800-645-4174 Rota-Rack Parts Accumulator Royal Products________ 800-645-4174 Solvents /Degreasing Agents Castrol____________ 800-894-7773 Hangsterfer’s________ 316-640-2462 Hasco Oil__________ 562-595-8491 Star Metal Fluids______ 800-367-9966 Spindles GMN USA__________ 800-686-1679 Setco Spindles & Slides___ 866-362-0699 Vices and Vice Jaws 5th Axis___________ 858-505-0432 Desert EDM Sales______ 480-816-6300 Waterjet Cutting Abrasives Barton International_____ 800-741-7756 GMA Garnet_________ 828-243-9300 CALIBRATION SERVICES Advanced Coord. Tech ____ 303-469-6161 Klontech Industrial Sales__ 480-948-1871 Total Qual. Syst._______ 480-377-6422 GRINDING Grinding Machines Jend Machinery______ 303-775-3697
42 • May / June 2018
Moncktons Mach Tools_ 303-571-4933 Sharp Precision_____ 310-370-5990 Triad Machine______ 303-424-0268 Manual Lathes & Mills AME, Inc._________ 303-922-9266 Sharp Precision_____ 310-370-5990 Pedestals for Grinders Midaco___________ 847-593-8420 Sawing Machines Moncktons Mach Tools__ 303-571-4933 Rocky Mountain Saw Blades__303-761-3000 Saw Replacement Parts Rocky Mountain Saw Blades__303-761-3000 INSPECTION EQUIP Advanced Coord. Tech ____ 303-469-6161 Gage Lab Products______ 801-716-2972 Innovative Measuring Systems_602-527-5488 Klontech Indust. Sales____ 480-948-1871 Mitutoyo___________ 480-294-7631 OGP ____________ 480-889-9056 Selway Machine Tool___ 888-735-9290 Total Qual. Syst._______ 480-377-6422 Zeiss Industrial Metrology__ 800-327-9735 CMM Probes Gage Lab Products______ 801-716-2972 Innovative Measuring Systems_602-527-5488 Klontech Industrial Sales__ 480-948-1871 Mitutoyo___________ 480-294-7631 OGP ___________ 480-889-9056 Coordinate Measuring Mach. Innovative Measuring Systems_602-527-5488
Klontech Industrial Sales__ 480-948-1871 Moncktons Mach Tools__ 303-571-4933 OGP ___________ 480-889-9056 Mitutoyo___________ 480-294-7631 Selway Machine Tool___ 888-735-9290 Total Quality Systems____ 720-338-2581 Zeiss Industrial Metrology__ 800-327-9735 Gauging Equipment Gage Lab Products______ 801-716-2972 Innovative Measuring Systems_602-527-5488 Klontech Industrial Sales_ 480-948-1871 Mitutoyo___________ 480-294-7631 OGP ___________ 480-889-9056 Total Quality Systems____ 720-338-2581 Metrology Instruments Gage Lab Products______ 801-716-2972 Innovative Measuring Systems_602-527-5488 Klontech Industrial Sales_ 480-948-1871 Mitutoyo___________ 480-294-7631 OGP ___________ 480-889-9056 Total Quality Systems____ 720-338-2581 Zeiss Industrial Metrology__ 800-327-9735 Optical Comparators Gage Lab Products______ 801-716-2972
ACCUDYNE CORPORATION Daniel R. Kenner
2835 S. Raritan St Englewood, CO 80110 303-991-1500 (Ph) 303-991-1921 (Fax) Web: www.ezpullerusa.com E-Mail: Dan@eztram.com THE
ONLY TOOL
5th RIBAL BTADDINI
Mathew Evans Sales and Marketing
HONEST. HARDWORKING. RESULTS.
Strategic Account Manager OEM WEST REGION DATA COMMUNICATIONS DIVISION
7140 Engineer Rd, San Diego, CA 92111 mevans@fifthaxis.com (858)505-0432 www.fifthaxis.com
P: 888.668.6818 C: 937.479.5381 ribal.btaddini@legrand.us www.legrand.us
3676 W. California Ave., Ste A117 Salt Lake City, UT 52404 MAIN: CELL:
801.886.2221 435.901.0287
General Mgr/Vice President
spolster@mmtproductivity.com www.mmtproductivity.com
IMS Steve Polster, CMTSE 521 S 48th St. Tempe, AZ 85281 General Mgr/Vice President www.innovativemeasuring.com
3676 W. California Ave., Ste A117 Salt Lake City, UT 52404 MAIN: 801.886.2221 Helping You435.901.0287 Find The Right CELL:
Solutions For Your Measuring Needs
Ken Lambert spolster@mmtproductivity.com (602)527-5488 www.mmtproductivity.com ken@innovativemeasuring.com
Innovative Measuring Systems_602-527-5488 Klontech Industrial Sales_ 480-948-1871 Steve480-294-7631 Polster Mitutoyo___________ General Mgr/Vice President OGP ___________ 480-889-9056 , CMTSE
IMS
3676 W. California Ave., Ste A117 Salt Lake City, UT 52404 MAIN: CELL:
801.886.2221 435.901.0287
spolster@mmtproductivity.com www.mmtproductivity.com
Total Quality Systems____ 720-338-2581 Innovative Measuring Systems Sensors: Contact & 85281 Optical 1711 W. 17th St. Tempe, AZ www.innovativemeasuring.com Mitutoyo___________ 480-294-7631 Ken Lambert (801)673-4783 Zeiss Industrial Metrology__ 800-327-9735 Video MeasuringSteve Systems Polster General Mgr/Vice President Gage Lab Products______ 801-716-2972 Klontech Industrial Sales_ 480-948-1871 Mitutoyo___________ 480-294-7631 Helping You Find The Right Solutions For Your Measuring Needs
ken@innovativemeasuring.com
, CMTSE
3676 W. California Ave., Ste A117 Salt Lake City, UT 52404 MAIN: CELL:
801.886.2221 435.901.0287
spolster@mmtproductivity.com www.mmtproductivity.com
Total Quality Systems____ 720-338-2581 HARDWARE Horizon Carbide Tool___480-968-0957 Steve Polster General Mgr/Vice President Metal Supermarkets___ 801-972-2441 Metal Supermarkets___ 303-424-1030 , CMTSE
3676 W. California Ave., Ste A117 Salt Lake City, UT 52404 MAIN: CELL:
801.886.2221 435.901.0287
3676 W. California Ave., Ste A117 Salt Lake City, UT 52404 MAIN: CELL:
801.886.2221 435.901.0287
General Mgr/Vice President
spolster@mmtproductivity.com www.mmtproductivity.com
METALS & MATERIALS Steve Polster AZ Tool Steel LLC______480-784-1600 General Mgr/Vice President Coastal Metals_______ 800-811-7466 Erickson Metals______877-543-6061 Jacquet West_______310-684-4370 Kloeckner Metals Corp_ 480-389-2883 Metal Supermarkets___ 801-972-2441 Metal Supermarkets___303-424-1030 Steve Polster Olympic Metals______303-286-9700 General Mgr/Vice President Ryerson__________303-227-6310 Western States Metals__801-978-0562 Aluminum Affiliated Metals______ 800-748-4711 Metal Supermarkets___ 801-972-2441 Metal Supermarkets___ 303-424-1030 Steve Polster General Mgr/Vice President Olympic Metals______ 303-286-9700 Armor: Military & Commercial Kloeckner Metals Corp_ 480-389-2883 TW Metals_________ 800-203-8000 Brass Steve Polster Coastal Metals_______ 800-811-7466 General Mgr/Vice President Metal Supermarkets___ 801-972-2441 , CMTSE
3676 W. California Ave., Ste A117 Salt Lake City, UT 52404 MAIN: CELL:
801.886.2221 435.901.0287
spolster@mmtproductivity.com www.mmtproductivity.com
, CMTSE
3676 W. California Ave., Ste A117 Salt Lake City, UT 52404 MAIN: CELL:
801.886.2221 435.901.0287
spolster@mmtproductivity.com www.mmtproductivity.com
, CMTSE
3676 W. California Ave., Ste A117 Salt Lake City, UT 52404 MAIN: CELL:
801.886.2221 435.901.0287
spolster@mmtproductivity.com www.mmtproductivity.com
, CMTSE
3676 W. California Ave., Ste A117 Salt Lake City, UT 52404 MAIN: CELL:
801.886.2221 435.901.0287
C2G® | ORTRONICS® | QUIKTRON® RAPIDRUN® | WIREMOLD®
spolster@mmtproductivity.com www.mmtproductivity.com
Utah Metal Works, Inc.__ 801-364-5679
Innovative Measuring Systems
Legrand, North America 3555 Kettering Blvd. Moraine, OH 45439
Steve Polster, CMTSE
spolster@mmtproductivity.com www.mmtproductivity.com
Adam Papilion
Director of Operations 970.692.3344
adam@h2manufacturing solutions.com www.h2manufacturingsolutions.com
Metals: Bar & Plate AZ Tool Steel LLC______480-784-1600 Coastal Metals_______ 800-811-7466 JACQUET West 22400 Lucerne Street Metal Supermarkets___ 801-972-2441 Carson / CA 90745 Offering plasma cutting and P +1 310-684-4370 waterjet cutting of stainless F +1 310-684-4377 Metal Supermarkets___ 303-424-1030 steel plate and nickel alloy C +1 714-496-3445 plate and bar c.weber@myjacquet.com Ryerson___________303-227-6310 www.myjacquet.com/USA TW Metals_________ 800-203-8000 Mold Steel Metal Supermarkets____ 303-424-1030 AZ Tool Steel LLC______480-784-1600 Olympic Metals_______ 303-286-9700 Nickel Alloys Ryerson____________303-227-6310 AZ Tool Steel LLC______480-784-1600 Bronze Jacquet West_______310-684-4370 Coastal Metals________ 800-811-7466 Ryerson__________ 303-227-6310 Metal Supermarkets____ 801-972-2441 TW Metals_________ 800-203-8000 Plate-Precision Saw Cut Metal Supermarkets____ 303-424-1030 Erickson Metals______877-543-6061 Olympic Metals_______ 303-286-9700 Pre-Honed Tube Carbon Western States Metals__801-978-0562 Coastal Metals________ 800-811-7466 Stainless Steel Ryerson____________303-227-6310 AZ Tool Steel LLC_____ 480-784-1600 Copper Coastal Metals_______ 800-811-7466 Olympic Metals_______ 303-286-9700 Jacquet West_______310-684-4370 Garnet Abrasives Kloeckner Metals Corp__ 480-389-2883 Barton International_____ 800-741-7756 Metal Supermarkets___ 801-972-2441 GMA Garnet Group____ 832-243-9300 Metal Supermarkets___ 303-424-1030
PROOF-back
Steve Polster, CMTSE
Christopher Weber General Manager
A2Z Manufacturing Rocky Mountain •
43 • May / June 2018
An ISO 9001 Company
Jeff Klimowicz Senior Sales Engineer Southwest Region: AZ, UT, NV, CO, ID All Products Proudly Made in the USA
Mobile: 480‐320‐0308 jklimowicz@qualichem.com www.qualichem.com
AlIen Webb Sales Associate
KNUTH Machine Tools USA, Inc. 590 Bond St. Lincolnshire, IL 60069
Ph: (847) 415-3333 x260 Fax: (847) 415-2402 a.webb@knuth-usa.com
www.knuth-usa.com
Olympic Metals______ 303-286-9700 Ryerson___________303-227-6310 Steel AZ Tool Steel LLC_______ 480-784-1600 Coastal Metals_______800-811-7466 Jacquet West_______310-684-4370 Kloeckner Metals Corp__ 480-389-2883 Metal Supermarkets___ 801-972-2441 Metal Supermarkets___ 303-424-1030 Olympic Metals______ 303-286-9700 Ryerson___________303-227-6310 Ryerson___________303-227-6310 METAL DISTRIBUTORS Erickson Metals______ 877-543-6061 Coastal Metals_______800-811-7466 Jacquet West_______310-684-4370 Kloeckner Metals Corp__ 480-389-2883 Metal Supermarkets___ 801-972-2441 Metal Supermarkets___ 303-424-1030 Olympic Metals______ 303-286-9700 Ryerson___________303-227-6310 TW Metals_________ 800-203-8000 A2Z Manufacturing Rocky Mountain•
Western States Metals__ 801-978-0562 NEW MACHINERY CHIP CUTTING CNC Drilling/Tapping Methods West_______ 602-437-2220 CNC Mills AME, Inc._________ 303-922-9266 Doosan__________ 973-618-2500 Foothills Machinery Sales__ 303-466-3777 Hurco___________ 800-634-2416 J.M. Grisley________ 801-486-7519 J.M. Grisley________ 208-861-8991 Jend Machinery______ 303-775-3697 King Machine_______ 208-345-9600 KTR Machine_______ 623-202-7177 Methods West_______ 602-437-2220 MMT, A Div of Productivty_303-571-4933 Romi Machine Tools LLC_ 859-647-7566 Selway Machine Tool___ 888-735-9290 Sharp Precision______ 310-370-5990 Smith Machinery Co___ 801-263-6403 Tornos USA_________951-695-0342 Triad Machine________303-424-0268
44 • May / June 2018
CNC Lathes AME, Inc._________ 303-922-9266 Doosan___________973-618-2500 Foothills Machinery____ 303-466-3777 J.M. Grisley_________801-486-7519 J.M. Grisley_________208-861-8991 Jend Machiney_______ 303-775-3697 Hurco____________ 800-634-2416 King Machine________208-345-9600 KTR Machine_________623-202-7177 Methods West________ 602-437-2220 MMT, A Div of Productivty_303-571-4933 Romi Machine Tools LLC_ 859-647-7566 Selway Machine Tool___ 888-735-9290 Sharp Precision______ 310-370-5990 Smith Machinery Co____ 801-263-6403 Triad Machine________ 303-424-0268 CNC Swiss Turn Machines AME, Inc.__________303-922-9266 Jend Machinery______ 303-775-3697 Methods West_______ 602-437-2220 MMT, A Div of Productivty_303-571-4933 Tornos USA_______ 951-695-0342 Triad Machine_______ 303-424-0268
EDM Drilling Machines Current EDM Inc_____650-966-9676 EDM Machines AME, Inc._________ 303-922-9266 Desert EDM Sales_____ 480-816-6300 EDM Network_______ 480-836-1782 Jend Machinery______ 303-775-3697 KNUTH Machine Tools____847-415-3333 Methods West_______ 602-437-2220 MMT, A Div of Productivty_303-571-4933 Smith Machinery Co___ 801-263-6403 Triad Machine_______ 303-424-0268 EDM Tooling Systems Desert EDM Sales_____ 480-816-6300 EDM Network_______ 480-836-1782 EDM Perform. Access.____ 800-336-2946 Global EDM Supply____ 480-836-8330
Michael McSWEENEY
Sales Manager
Ph: +1 724 696 4340 x3437 Direct: +1 724 213 7290 Cell: +1 724 309 1940 mcsweeney.michael@rotarex.com
ROTAREX NORTH AMERICA
101 Bilby Rd, Building #2 Hackettstown, NJ 07840 www.rotarexfiretec.com
Manual Mills & Lathes KNUTH Machine Tools____847-415-3333 Micro Hole Drilling Machines Current EDM Inc_____650-966-9676 NEW MACHINERY FABRICATION Angle Rolls Jorgenson Machine Tools__ 435-659-9455 Revolution Machine Tools__ 385-355-0316 Band Saws King Machine_______ 208-345-9600 KNUTH Machine Tools____847-415-3333 Revolution Machine Tools__ 385-355-0316 Ultimate Machinery_____ 480-966-2000 Bar Feeders Edge Technologies______ 562-597-7824 Cold Saws KNUTH Machine Tools____847-415-3333 CNC Punching Centers S&S Machinery Sales___ 602-368-8542 AMADA America______ 303-670-9406 Fiber Lasers Jorgenson Machine Tools__ 435-659-9455 Revolution Machine Tools__ 385-355-0316 Grinding Machines KNUTH Machine Tools____847-415-3333 Iron Workers S&S Machinery Sales___ 602-368-8542 Laser Cutters AMADA America______ 303-670-9406 Jorgenson Machine Tools__ 435-659-9455 KNUTH Machine Tools____847-415-3333 MMT, A Div of Productivty_303-571-4933 PrecisionFab Inc._____303-779-9180 S&S Machinery Sales___ 602-368-8542 Triad Machine_______ 303-424-0268
Pipe & Tube Benders/Notchers Amada America______ 303-549-9167 S&S Machinery Sales___ 602-368-8542 Plate Rolls Jorgenson Machine Tools__ 435-659-9455 Revolution Machine Tools__ 385-355-0316 Plasma Cutters KNUTH Machine Tools____ 847-415-3333 Press Brakes AMADA America______ 303-670-9406 Jorgenson Machine Tools__ 435-659-9455 King Machine_______ 208-345-9600 Revolution Machine Tools__ 385-355-0316 S&S Machinery Sales___ 602-368-8542 Shearing Machines Jorgenson Machine Tools__ 435-659-9455 King Machine_______ 208-345-9600 Revolution Machine Tools__ 385-355-0316 S&S Machinery Sales___ 602-368-8542 Welding Equipment Rocky Mountain Saw Blades303-761-3000 Welding Equipment: Spot Welders AMADA America______ 303-670-9406 OTHER ACCESSORIES Tooling Systems Desert EDM Sales______480-816-6300 USA EDM Supply_____ 480-836-8330
Robotic Part Loading Systems Mobility Ramps & Stairs - Modular Midaco___________ 847-593-8420 EZ-Access_________ 800-451-1903 SERVICES Woodworking Machines AS9100 Certification Pillar Machine________ 801-965-1900 ABS Quality Evaluations_ 702-371-7591 PLASTICS BMSC___________ 602-445-9400 Acrylics And Polycarbonates MEP ___________ 801-863-7001 Laird Plastics_______ 303-292-1687 Sustaining Edge Solutions__ 888-572-9642 Plastics: Fabrication Calibration Services Laird Plastics_______ 303-292-1687 Advanced Coord. Tech ___ 303-469-6161 Klontech Industrial_____480-948-1871 Graphics Materials Laird Plastics_______ 303-292-1687 Western States Calibration_ 801-466-1700 Consultant,3D Printing Mechanical/Engineering Material Laird Plastics_______ 303-292-1687 H2 Solutions_________ 970-692-3344 Consultant,Operational PRODUCTS Consultant, ISO Guns Layke Tactical_______ 602-272-2654 ABS Quality Evaluations_ 702-371-7591 BMSC___________ 602-445-9400 PROG. SYSTEMS MEP ___________ 801-863-7001 CAD/CAMSoftware, CAD AME, Inc._________ 303-922-9266 Sustaining Edge Solutions__ 888-572-9642 Cimatron_________ 248-596-9700 H2 Solutions_________ 970-692-3344 Consultant,Supply Chain Delcam (Autodeck)_____ 877-35-2261 H2 Solutions_________ 970-692-3344 Feature Cam_______ 602-502-9654 Improvement SolidCAM_________ 530-863-0461 H2 Solutions__________ 970-692-3344 PROTOTYPE MACHINERY 3D Parts To Go________801-380-7935 Contract Inspection
RECYCLING Recyclable Metals Iron & Metals, Inc_____ 303-292-5555 Utah Metal Works_____ 801-364-5679 PALLET SYSTEMS Scrap Metal Recycling Automatic Pallet Systems Iron & Metals, Inc_____ 303-292-5555 Midaco___________ 847-593-8420 Utah Metal Works_____ 801-364-5679 ROBOTIC EQUIPMENT Automatic Door Opener SysIntegrated Systems Inc__ 928-649-9600 tems Midaco___________ 847-593-8420 SAFETY Fire Protection Systems Manual Rotary Pallet Systems Midaco___________ 847-593-8420 Rotarex__________ 480-689-8756
Advanced Coord. Tech ___ 303-469-6161 Klontech Measure Sol___ 480-626-8131 Data Communications; Wire & Cable Management Legrand___________888-668-6818 Education Ogden-Weber Tech College_ 801-395-3795 Electrical: Breakers/Switches/ Starters Denver Breaker Supply __ 855-4UR-BRKR Engineering Services Advanced Coord. Tech ___ 303-469-6161
A2Z Manufacturing Rocky Mountain •
45 • May / June 2018
DAYTON Lamina
™
a MISUMI Group Company
Kevin Benson Die Components Marketing Director
39830 Grand River Ave. Suite B2 Novi, MI 48375
DAYTON Lamina Corporation a MISUMI Group Company
Phone: (248) 489-9122 Cell: (708) 203-6684 Email: kbenson@daytonlamina.com www.daytonlamina.com
MIKE DENISON BUSINESS LOAN OFFICER
Office: 801-463-3597 Cell: 801-979-3361 Fax: 801-294-3319 mdenison@ucreditu.com www.UcreditU.com
The Industry’s Most Trusted Source to Buy, Sell, and Trade-In Used CNC, Plastics, and Sheet Metal Fabrication Machinery.
800.922.1674
USED MACHINERY SALES AUCTIONS | APPRAISALS | LIQUIDATIONS
Benjamin Johnson ASNT Level III #210316 johnson80120@gmail.com 602-578-8109
ASNT, NAS 410, ASME Nadcap, ASTM, RT, UT, MT, PT
Level III NDT Consulting Services, LLC Training, Certifications, Nadcap Approvals, Responsible Level III, Aerospace, Petrol Chemical
Financing Intech Funding______ 385-553-9208 Univerity Federal Credit Union_ 801-463-3597 First Article Inspection Advanced Coord. Tech _____303-469-6161 Heavyhaul IRH ____________801-972-5581 Injection Molding 3D Parts To Go______ 801-380-7935 Inspection Services Advanced Coord. Tech _____303-469-6161 Insurance Services Sentry Insurance_____ 877-373-6879 Lean Consulting ABS Quality Evaluations_ 702-371-7591 MEP Center________ 801-587-0713 Process Improvement/ Audit ABS Quality Evaluations_ 702-371-7591 BMSC ______________ 602-445-9400 Sustaining Edge Solutions__ 888-572-9642 Spindle Repair RMS Assembly________ 303-777-3064 X-Ray Certified Inspection Service__602-267-0661 ISO9000 / AS9100 Cert. BMSC ______________ 602-445-9400 MEP Center________ 801-587-0713 Orion Registrar ________303-645-4017 Sustaining Edge Solutions__ 888-572-9642 ISO Registrar Orion Registrar ________303-645-4017 A2Z Manufacturing Rocky Mountain •
Lean Manufacturing MEP Center________ 801-587-0713 Sustaining Edge Solutions__ 888-572-9642 Machine Tool Rebuilding EDM Network_______ 480-836-1782 Ad Design Heppner & Bourque___ 303-675-0105 Photography Heppner & Bourque___ 303-675-0105 Social Media Heppner & Bourque___ 303-675-0105 Website Development Heppner & Bourque___ 303-675-0105 Nadcap Approvals - Consulting Level III NDT Consulting_ 602-578-8109 Non-Destructive Testing (NDT) Level III NDT Consulting_ 602-578-8109 Process Improvement BMSC ______________ 602-445-9400 MEP Center________ 801-587-0713 Sustaining Edge Solutions___ 888-572-9642 Reverse Engineering Advanced Coord. Tech ___ _303-469-6161 Diversified Metal Services___ 801-972-6093 Klontech Measure Sol____ 480-626-8131 Rigging & Transfer Atlas Rigging & Transfer_ 801-539-3885 IRH ___________ _801-972-5581
46 • May May/ /June June 2018 2018
Business insurance solutions for the precision manufacturing industry 1-877-373-6879 businessproducts_direct@sentry.com sentry.com
MEI Rigging__________801-701-7975 Spindle Rebuilding GMN USA__________ 800-686-1679 Setco-Pope Spindles______866-362-0699 Transportation IRH ____________801-972-5581 SOFTWARE Machining Software CAD/CAM/CAE Davis Applied Tech College___801-593-2483 SolidCAM_________ 530-863-0461 USED MACHINERY Consulting/Engineering Von Ruden Mfg______ 763-682-0322 EDM Network_________ 480-836-1782 Jorgenson Machine Tools____435-659-9455 SPINDLE REPAIR RMS Assembly & Mfg___ 303-777-3064 King Machine_________208-345-9600 K.D. Capital Equipment____480-922-1674 TOOLING Methods West_________602-437-2220 PrecisionToolholding Products Von Ruden Mfg______ 763-682-0322 ReSell CNC West________480-694-9919 S&S Machinery Sales_____602-368-8542 _ Tooling Systems Von Ruden Mfg______ 763-682-0322 Selway Machine Tool___ 888-735-9290 WATERJET CUTTING Live Tool Holders MACHINERY Von Ruden Mfg______ 763-682-0322 Fabricating Equip Sales___303-466-7342 Static Tool Holders Flow International_______800-446-3569 Von Ruden Mfg______ 763-682-0322 Global EDM Supply_____480-836-8330 TRAINING Jend Machinery________303-775-3697 MEP Center________ 801-587-0713 Jorgenson Machine Tools____435-659-9455 CAD/CAM Training King Machine_________208-345-9600 Davis Applied Tech College___801-593-2483 OMAX Corp________ _800-838-0343 CNC/Conventional Abrasives/Blast Media Barton International_ ____ 800-741-7756 Machining Davis Applied Tech College___801-593-2483 GMA Garnet Group_____ 832-243-9300
Buyer’s Guide & Card Gallery Processes
JEFF ROBINO
VICE PRESIDENT SALES / MACHINE MECHANICAL GROUP
t 520.294.3126 c 520.247.5977 jeffr@caid.com www.caid.com
Mobility Ramps & Stairs Modular EZ-Access_________ 800-451-1903 SERVICES AS9100 Certification ABS Quality Evaluations_ 702-371-7591 BMSC___________ 602-445-9400 MEP ___________ 801-863-7001 Sustaining Edge Solutions__ 888-572-9642
CAID Industries_________435-890-8823 Dayton Rogers_______ 763-717-6303 JD Machine_________ 801-782-4403 Pillar Machine_______ 801-965-1900 Wrico____________ 480-892-7800 AUTOMATION Motion Control/ Machine Vision In-Position Technologies_ 303-231-9955
UTAH COLORADO Calibration Services 189 South State St. 6531 West 56th Ave. Advanced Coord. Tech ___ 303-469-6161 Suite 100 Suite 15 Electronics Assemblies Klontech Industrial_____480-948-1871 Clearfield, UT 84015 Arvada, CO 80002 303-231-9955 Western States Calibration_801-466-1700 Advantage Manufacturing_877-7270281 801-355-9899 CAID Industries______ 435-890-8823 Consultant,3D Printing ADDITIVE MFG/ 3 D PRINTING H2 Solutions_________ 970-692-3344 COATING Welded Assemblies Faustson___________303-420-7422 Consultant,Operational Weiser Engineering___ 303-280-2778 Coating:Black Oxide SolidCAM_________ 530-863-0461 Consultant, ISO BAR CODING PROTOTYPE MACHINERY PAS Technologies______ 480-487-1906 ABS Quality Evaluations_ 702-371-7591 3D Parts To Go________801-380-7935 BMSC___________ 602-445-9400 Western Sintering___ 509-375-3096 Coating:Chemfilm MEP ___________ 801-863-7001 RECYCLING BROACHING Sustaining Edge Solutions__ 888-572-9642 PAS Technologies______ 480-487-1906 Recyclable Metals H2 Solutions_________ 970-692-3344 Ponderosa Ind_________303-298-1801 Coating: Liquid Iron & Metals, Inc_____ 303-292-5555 Consultant,Supply Chain Precision Mach’d Products_970-482-7676 Utah Metal Works_____ 801-364-5679 H2 Solutions_________ 970-692-3344 Specialty Steel Services__ 801-539-8252 Pilkington Metal Finishing_ 801-972-2146 Scrap Metal Recycling Qualified Rapid Products__ 801-999-4297 Coating: Nickel/ Teflon/Chrome CASTINGS Iron & Metals, Inc_____ 303-292-5555 Design/Engineering Die Casting Utah Metal Works_____ 801-364-5679 Coating Technologies____623-581-2648 Qualified Rapid Products__ 801-999-4297 TVT Die Casting_______ 800-280-2278 ROBOTIC EQUIPMENT PAS Technologies______ 480-487-1906 Die Casting: Aluminum/Zinc ASSEMBLIES Integrated Systems Inc__ 928-649-9600 Coating:Zinc & Mag.Phos. Advantage Manufacturing__877-727-0281 TVT Die Casting_______ 800-280-2278 SAFETY Coating Technologies____623-581-2648 Acu-Tec CNC_________ 303-365-9245 CHEMICAL PROCESSING Fire Protection Systems PAS Technologies______ 480-487-1906 Rotarex__________ 480-689-8756 Bar-S Machine_________928-636-2115 PAS Technologies____ 480-487-1906 A2Z MANUFACTURING ROCKY MOUNTAIN •
47 •July/Aug
Paramount Machine
www.paramount-machine.com sales@paramount-machine.com Office: 801.886.2755 Fax: 801.886.2759
Maverick Mold & Machine_ 970-535-4604 Micropulse West_______ 480-966-2300 Prec. Mach’d Products____ 970-482-7676 EDM: Wire Custom Design & Mfg____ 435-257-0668 Dynamic Design & Mfg___ 303-652-0431 EDM Express_______ 800-780-7075 Innovative Precision______801-334-6317 Jensen Precision_______ 801-866-0175 Micropulse West_______ 480-966-2300 Paramount Machine____ 801-886-2755 COMPOSITES Qualtek_________ 719-598-3394 X23 S.A. Composites_______ 970-776-3877 The Toolroom Inc.______ 801-773-6331 Thompson Machine_____ 505-823-1453 CUTTING Metal Wrico____________ 480-892-7800 Bandsaw LLC_________303-744-7181 ELECTROPOLISHING Plasma Cutting Qualtek_________ 719-598-3394 X23 Bandsaw LLC_________303-744-7181 ENGINEERING/DESIGN Plastic Bandsaw LLC_________303-744-7181 Advantage Manufacturing_ 877-727-0281 AzMark___________480-926-8969 Saw Cutting Bandsaw LLC_________303-744-7181 CAID Industries______435-890-8823 Custom Design & Mfg____435-257-0668 DESIGNCAD/CAM Bar-S Machine________ 928-636-2115 Dynamic Design & Mfg___ 303-652-0431 H& S Machine________ 801-755-7627 Precision Tech________801-285-7288 Reverse Engineering DIES Precision Tech________801-285-7288 Able Machining & Eng.__ 801-268-6766 EDM FABRICATION EDM: Drilling Small Hole Advantage Manufacturing_ 877-727-0281 LAYKE, Inc.__________ 602-272-2654 Aero Tech________ 801-292-0493 Micropulse West_______ 480-966-2300 CAID Industries______435-890-8823 EDM: Ram-Type (Sinking) Innovative Precision____ 801-334-6317 Dayton Rogers_______ 763-717-6303
A2Z Manufacturing Rocky Mountain •
48 • May / June 2018
Dynamic Design & Mfg___ 303-652-0431 EMJD Corporation______ 303-761-5236 EPOCS Mfg_________970-535-4540 Jensen Precision_______ 801-866-0175 Kustom Koncepts______ 307-472-0818 Mountain View Machine __435-755-0500 Pillar Machine______ 801-965-1900 Star Precision________303-926-0559 Wrico____________480-892-7800 Custom Auto/Truck/Bike H& S Machine_______ 801-755-7627 Fabrication: Filament Winding S.A. Composites_______ 970-776-3877 Fabrication: Composites S.A. Composites_______ 970-776-3877 Fabrication: Enclosures Kustom Koncepts______ 307-472-0818 Star Precision________303-926-0559 Fabrication: Medium & Large Bandsaw LLC_________303-744-7181 CAID Industries______435-890-8823 EMJD Corp__________ 303-761-5236 EPOCS Mfg_________970-535-4540 Group Mfg Serv_______480-966-3952 Kustom Koncepts______ 307-472-0818 Weiser Engineering__ 303-280-2778
Fabrication: SheetMetal Advantage Manufacturing_ 877-727-0281 AzMark___________480-926-8969 CAID Industries______435-890-8823 Denver Machine Shop____303-295-6000 Dynamic Design & Mfg___ 303-652-0431 EMJD Corporation______ 303-761-5236 EPOCS Mfg_________970-535-4540 Group Mfg Serv_______480-966-3952 JD Machine_________801-782-4403 Jensen Precision_______ 801-866-0175 Kustom Koncepts______ 307-472-0818 Metalcraft__________888-280-7080 Pillar Machine_______ 801-965-1900 Richards Fab______ 801-409-0392 Star Precision________303-926-0559 Weiser Engineering__ 303-280-2778 Wrico____________480-892-7800 Fabrication: Steel Bandsaw LLC_________ 303-744-7181 CAID Industries______435-890-8823
GAS NITRIDING Blanchard Metals Proc.___801-972-5590 Iron Phosphates GEAR CUTTING Wasatch Powder Coating__ 801-718-7969 Ponderosa Ind________ 303-298-1801 Passivation Specialty Steel Svcs____ 801-539-8252 Certified Inspection Service___602-267-0661 Gear Hobbing Coating Technologies____623-581-2648 Ponderosa Ind________ 303-298-1801 Gold Tech Industries_____ 480-968-1930 GRINDING Qualtek_________719-598-3394 X23 AzMark___________480-926-8969 Photochemical/Etching Diversified Metal Services__ 801-972-6093 VACCO Industries______ 626-443-7121 GMN USA_________ 800-686-1679 Prec. Mach’d Products__ 970-482-7676 Powder Coating Arizona Finishing______602-438-4443 Ron Grob Co.________970-667-5320 CPCS_____________303-438-8328 Steel Services Grinding___ 800-662-0126 Pilkington Metal Finishing_ 801-972-2146 Sun Grinding________602-238-9595 Qualtek________ 719-598-3394 X23 Superior Grinding______801-487-9700 Star Precision________303-926-0559 The Toolroom Inc.______ 801-773-6331 Grinding, Blanchard Wasatch Powder Coating__ 801-718-7969 Diversified Metal Services__ 801-972-6093 Sandblasting Steel Services Grinding___ 800-662-0126 Wasatch Powder Coating__ 801-718-7969 Sun Grinding________602-238-9595 Shot Peen Superior Grinding______ 801487-9700 PAS Technologies______ 480-487-1906 Grinding, Centerless Silk Screening Ron Grob Co.________970-667-5320 Arizona Finishing______602-438-4443 Sun Grinding________602-238-9595 Grinding, Cold Saw Aluminum (Medium & Large) AA Carbide________ 801-486-4881 Aero Tech________ 801-292-0493 PAS Technologies______ 480-487-1906
EMJD Corp_______ 303-761-5236 FINISHING Advantage Manufacturing_ 877-727-0281 Arizona Finishing______602-438-4443 Coating Technologies____623-581-2648 CPCS_____________303-438-8328 Gold Tech Industries_____ 480-968-1930 PAS Technologies______ 480-487-1906 Phoenix Heat Treating___ 602-258-7751 Precision Mach’d Prod____ 970-482-7676 Qualtek________ 719-598-3394 X23 Star Precision________303-926-0559 Superior Grinding______801-487-9700 TVT Die Casting_______800-280-2278 Wasatch Powder Coating__ 801-718-7969 Finishing: One Stop Advantage Manufacturing_ 877-727-0281 PAS Technologies______ 480-487-1906 Glass Bead Clean Coating Technologies____623-581-2648 Gold Tech Industries_____480-968-1930
Grinding: OD AzMark___________480-926-8969 Ron Grob Co.________970-667-5320 Sun Grinding________602-238-9595 Superior Grinding______ 801487-9700 Grinding: Surface Precision Tech________801-285-7288 Sun Grinding________602-238-9595 Superior Grinding______ 801487-9700 Grinding: Tool & Cutter BC Tool & Cutter Grinding__ 713-638-0303 Exact Tool Grinding_____ 801-712-2720 Passivation Gold Tech Industries_____ 480-968-1930 Polishing Gold Tech Industries_____ 480-968-1930 FORMING Dynamic Design & Mfg___ 303-652-0431 EPOCS Mfg_________970-535-4540 JD Machine_________801-782-4403 Star Precision________303-926-0559 HEAT TREATING Blanchard Metals Proc.___801-972-5590 Phoenix Heat Treating___ 602-258-7751 Pilkington Metal Finishing__801-972-2146 Qualtek_________ 719-598-3394 X23 Temperature Processing___ 303-772-0250
A2Z Manufacturing Rocky Mountain •
49 • May / June 2018 49 •July/Aug
A2Z MANUFACTURING ROCKY MOUNTAIN •
The Toolroom Inc.______ 801-773-6331 Heat Treating/Aero Phoenix Heat Treating___ 602-258-7751 Heat Treating/Cryogenics Temperature Processing__ 303-772-0250 Heat Treating/Custom Temperature Processing___ 303-772-0250 Heat Treating/Nitriding Temperature Processing___ 303-772-0250 Large Capacity Drop Bottom Oven/Aluminum Phoenix Heat Treating___ 602-258-7751 Vibrational Stress Testing Temperature Processing___ 303-772-0250 HONING/LAPPING LAYKE, Inc._________602-272-2654 Precision Tech________801-285-7288 IDENTIFICATION Silk Screen Arizona Finishing_____602-438-4443 INSPECTION Inspection, First Article Klontech Measure Sol____ 480-626-8131 Inspection Services Klontech Measure Sol____ 480-626-8131 Micropulse West_______480-966-2300 Sustaining Edge Solutions__888-572-9642 LASER CUTTING Laser Cutting Advantage Manufacturing____ 877-727-0281 A2Z Manufacturing Rocky Mountain •
EMJD Corporation_____303-761-5236 EPOCS Mfg_________970-535-4540 Kustom Koncepts______ 307-472-0818 Richards Fab______ 801-409-0392 Star Precision________303-926-0559 VACCO Industries_____ 626-443-7121 Weiser Engineering__ 303-280-2778 Wrico____________480-892-7800 Laser Cutting: Pipe&Tube Richards Fab______ 801-409-0392 Laser Engraving Jensen Precision_______ 801-866-0175 Laser Marking Jensen Precision_______ 801-866-0175 MACHINING Acu-Tec CNC_________303-365-9245 Advantage Manufacturing___ 877-727-0281 American Machine & Eng.__ 801-973-0494 Apex Engineering_____ 435-713-0072 CAID Industries______435-890-8823 CM Manufacturing____ 406-543-4450 Custom Design & Mfg____435-257-0668 Dynamic Design & Mfg___ 303-652-0431 EPOCS Mfg_________970-535-4540 Flex-Pro___________ 480-773-3239 Kings Peak Manufacturing_ 801-337-5926 Loveridge Machine Co.___ 801-262-1414 Machinists Inc_______ 800-244-4130 Mountain View Machine__435-755-0500 RD Machine & MFg____ 801-977-0447 Radtech__________ 303-789-4247 RP Machining_______ 719-550-1724 Skydandee Mfg______ 801-774-8031 Teton Machining_____ 208-642-9344
50 • May / June 2018
TVT Die Casting______ 800-280-2278 Weiser Engineering__ 303-280-2778 Machining: 3D Faustson___________303-420-7422 Qualified Rapid Products__ 801-999-4297 Machining: 5 Axis Accutech Machine______ 801-975-1117 AzMark___________480-926-8969 Faustson___________303-420-7422 JD Machine_________801-782-4403 Machinists Inc_______ 800-244-4130 Paramount Machine___ 801-886-2755 Precision Tech________801-285-7288 RP Machining_______ 719-550-1724 S.A. Composites_______ 970-776-3877 Machining: Aerospace AzMark___________480-926-8969 CAID Industries______435-890-8823 CM Manufacturing____ 406-543-4450 Flex-Pro___________480-773-3239 LAYKE, INC__________602-272-2654 Micropulse West_______480-966-2300 Mountain View Machine__435-755-0500 Paramount Machine_____801-886-2755 Pinnacle Precision____435-563-2722 Ponderosa Ind________ 303-298-1801 Precision Mach’d Products_ 970-482-7676 Precision Tech________801-285-7288 Radtech__________ 303-789-4247 RD Machine & MFg____ 801-977-0447 RP Machining_______ 719-550-1724 Skydandee Mfg______ 801-774-8031 Teton Machining_____ 208-642-9344 Machining: Ceramic O’Keefe Ceramics______ 719-687-0888 Ceramic: Sapphire, Alumina, Silicon, Aluminum, Quartz O’Keefe Ceramics______ 719-687-0888 Machining: CNC Able Machining & Eng.__ 801-268-6766 Acu-Tec CNC_________303-365-9245
Apex Engineering_____ 435-713-0072 Accutech Machine______ 801-975-1117 American Machine & Eng.__ 801-973-0494 Apex Engineering_____ 435-713-0072 Bar-S Machine_______ 928-636-2115 CM Manufacturing____ 406-543-4450 Cornerstone Machine___ 801-731-8862 Custom Design & Mfg____435-257-0668 Denver Precision Products__ 303-469-1771 DMSI___________801-972-6093 DRP Machine_______ 801-699-4372 Dynamic Design & Mfg___ 303-652-0431 EPOCS Mfg________970-535-4540 Faustson__________ 303-420-7422 Flex-Pro___________ 480-773-3239 H& S Machine_______ 801-755-7627 HPMP____________ 801-619-9850 Innovative Precision___ 801-334-6317 JD Machine_________801-782-4403 Jensen Precision_______ 801-866-0175 Kings Peak Manufacturing_ 801-337-5926 LAYKE, INC__________602-272-2654 Leading Edge Machine__ 435-563-9425 Loveridge Machine Co.___ 801-262-1414 Maverick Mold & Machine_ 970-535-4604 Pinnacle Precision____435-563-2722 Precision Tech________801-285-7288 Electromechanical Design RD Machine & Mfg____ 801-977-0447 RP Machining_______ 719-550-1724 Star Precision________303-926-0559 Teton Machining_____ 208-642-9344 The Toolroom Inc.______ 801-773-6331 Wrico___________ 480-892-7800 Machining: Composites Metalcraft__________888-280-7080 Machining: Contract Acu-Tec CNC_________303-365-9245 American Machine & Eng.__ 801-973-0494 JD Machine_________801-782-4403
sales@aandlmachining.com
Jensen Precision_______ 801-866-0175 Machinists Inc_______ 800-244-4130 Paramount Machine____801-886-2755 Radtech__________ 303-789-4247 Electromechanical Design Skydandee Mfg______ 801-774-8031 Machining: DoD CM Manufacturing____ 406-543-4450 Machining: Large Machinists Inc_______ 800-244-4130 Machining: Laser AzMark___________480-926-8969 Dynamic Design & Mfg___ 303-652-0431 Faustson__________ 303-420-7422 Gerome Mfg________520-622-8402 Innovative Precision___ 801-334-6317 L.A.R. Manufacturing___ 801-280-3505 RD Machine & Mfg____ 801-977-0447 Southwest Waterjet-Laser__480-306-7748 VACCO Industries_____ 626-443-7121 Weiser Engineering__ 303-280-2778 Machining:Medical A&L Machining_______303-373-1540 CAID Industries______435-890-8823 Pinnacle Precision____435-563-2722 Teton Machining_____ 208-642-9344 Machining: Milling Acu-Tec CNC_________303-365-9245 American Machine & Eng.__ 801-973-0494 Cornerstone Machine___ 801-731-8862 DRP Machine_______ 801-699-4372 Dynamic Design & Mfg___ 303-652-0431 EPOCS Mfg_________970-535-4540 JD Machine_________801-782-4403 Kings Peak Manufacturing_ 801-337-5926 Machinists Inc_______ 800-244-4130 Metalcraft__________888-280-7080 Mountain View Machine__435-755-0500 Pillar Machine______ 801-965-1900 Prec. Mach’d Products__970-482-7676
Pinnacle Precision____435-563-2722 Ponderosa Ind________ 303-298-1801 RP Machining_______ 719-550-1724 Precision Machined Prod.__ 970-482-7676 TVT Die Casting_______800-280-2278 Precision Tech________801-285-7288 Ron Grob Co.________970-667-5320 Machining: Mold Base Maverick Mold & Machine___970-535-4604 Machining: Production Able Machining & Eng.__ 801-268-6766 Acu-Tec CNC_________303-365-9245 Apex Engineering_____ 435-713-0072 CM Manufacturing____ 406-543-4450 Cornerstone Machine___ 801-731-8862 Custom Design & Mfg___ 435-257-0668 Elite Machie_________ 801-710-7891 Faustson__________ 303-420-7422 Flex-Pro___________ 480-773-3239 HPMP____________ 801-619-9850 Innovative Precision___ 801-334-6317 Kings Peak Manufacturing_ 801-337-5926 L.A.R. Manufacturing___ 801-280-3505 Loveridge Machine Co.___ 801-262-1414 Newport Tool________801-295-7411 Paramount Machine___ 801-886-2755 Ponderosa Ind________ 303-298-1801 Precision Tech________801-285-7288 Radtech____ ______303-789-4247 RD Machine & Mfg____ 801-977-0447 RP Machining_______ 719-550-1724 Star Precision________303-926-0559 Machining: Prototype Able Machining & Eng.__ 801-268-6766 Accutech Machine______ 801-975-1117 Acu-Tec CNC_________303-365-9245 American Machine & Eng.__ 801-973-0494 Apex Engineering_____ 435-713-0072
Machining: R & D Bar-S Machine_______ 928-636-2115 Cornerstone Machine___ 801-731-8862 Acu-Tec CNC_________303-365-9245 Custom Design & Mfg____435-257-0668 American Machine & Eng.__ 801-973-0494 Denver Precision______ 303-469-1771 Custom Design & Mfg____435-257-0668 Faustson___________303-420-7422 Dynamic Design & Mfg___ 303-652-0431 Flex-Pro ___________ 480-773-3239 Flex-Pro___________ 480-773-3239 Innovative Precision___ 801-334-6317 JD Machine_________801-782-4403 JD Machine_________801-782-4403 Jensen Precision_______ 801-866-0175 Jensen Precision_______ 801-866-0175 Pillar Machine______ 801-965-1900 Kings Peak Manufacturing_ 801-337-5926 Precision Tech________801-285-7288 L.A.R. Manufacturing___ 801-280-3505 Machining: Swiss LAYKE, INC__________602-272-2654 Bar-S Machine_______ 928-636-2115 Leading Edge Machine___435-563-9425 Denver Precision Products__ 303-469-1771 Micropulse West______ 480-966-2300 HPMP____________ 801-619-9850 Mountain View Machine_ 435-755-0500 Pacific Swiss & Manufacturing_ 503-557-9407 Newport Tool________801-295-7411 Pinnacle Precision____435-563-2722 Pillar Machine______ 801-965-1900 Ron Grob Co.________970-667-5320 Radtech__________ 303-789-4247 Teton Machining_______208-642-9344 RD Machine & Mfg____ 801-977-0447 Machining: Turning RP Machining_______ 719-550-1724 Skydandee Mfg______ 801-774-8031 Acu-Tec CNC_________303-365-9245 S.A.Composites______ 970-776-3877 American Machine & Eng.__ 801-973-0494 The Toolroom Inc._____ 801-773-6331 Apex Engineering_____ 435-713-0072 AzMark___________480-926-8969 Machining: Precision Bar-S Machine_______ 928-636-2115 Able Machining & Eng.__ 801-268-6766 Custom Design & Mfg____435-257-0668 Advantage Manufacturing_ 877-727-0281 American Machine & Eng.__ 801-973-0494 Denver Precision Products__ 303-469-1771 CM Manufacturing____ 406-543-4450 DRP Machine_______ 801-699-4372 Cornerstone Machine___ 801-731-8862 EPOCS Mfg_________970-535-4540 Flex-Pro___________ 480-773-3239 Faustson__________ 303-420-7422 Jensen Precision_______ 801-866-0175 HPMP____________ 801-619-9850 Kings Peak Manufacturing_ 801-337-5926 JD Machine_________801-782-4403 Loveridge Machine Co.___ 801-262-1414 LAYKE, INC__________602-272-2654 Newport Tool________801-295-7411 Leading Edge Machine___ 435-563-9425 A2Z Manufacturing Rocky Mountain •
51 •
May / June 2018
Wire Springs ● Flat Springs ● Wire Products www.springworksutah.com sales@springworksutah.com (801) 298Ͳ0113 2261 S. 1560 W. ● Woods Cross ● UT 84087
MOLDS Loveridge Machine Co.___ 801-262-1414 Maverick Mold & Machine_ 970-535-4604 Molds: Plastic Injection Lifetime Products______801-728-1260 Maverick Mold & Machine_ 970-535-4604 Molds Steel DMSI____________ 801-972-6093 Aero Tech_________ 801-292-0493 Arizona Finishing_____602-438-4443 Loveridge Machine Co.___ 801-262-1414
Machinists Inc_______ 800-244-4130 Metalcraft__________888-280-7080 Mountain View Machine___ 435-755-0500 Precision Tech________801-285-7288 RD Machine & Mfg____ 801-977-0447 RP Machining_______ 719-550-1724 Teton Machining_______208-642-9344 Weiser Engineering__ 303-280-2778 Machining: Ultra-Precision Pacific Swiss & Manufacturing_ 503-557-9407 Pinnacle Precision____435-563-2722 MANUFACTURING A&L Machining_______303-373-1540 CAID Industries______435-890-8823 Group Mfg Serv______480-966-3952 Electromechanical Design CAID Industries______435-890-8823 RD Machine & Mfg____ 801-977-0447 Composites S.A. Composites________970-776-3877 A2Z Manufacturing Rocky Mountain •
Contract Apex Engineering_____ 435-713-0072 Teton Machining_______208-642-9344 Manufacturing: Electrode Wire-Tech_________ 480-966-1591 Production Aero Tech_________ 801-292-0493 EMJD Corporation_____303-761-5236 L.A.R. Manufacturing___ 801-280-3505 Precision Tech________801-285-7288 Rapid Prototyping Jensen Precision_______ 801-866-0175 Robotic CNC DMSI____________ 801-972-6093 Routering CNC DMSI____________ 801-972-6093 Small Part Pinnacle Precision____435-563-2722 Turnkey Product Services Aero Tech_________ 801-292-0493 L.A.R. Manufacturing___ 801-280-3505 METAL STAMPING Qualtek________ 719-598-3394 X23 Thompson Machine_____ 505-823-1453 Hi-Production Precision Stamping Metalcraft__________888-280-7080 Precision Die & Stamping__ 480-967-2038 Thompson Machine_____ 505-823-1453
52 • May / June 2018
3D Prototyping The 3D Printing Store____720-443-3733 PROCESSING: METAL Chemical PAS Technologies______ 480-487-1906 Etching/Photochemical VACCO Industries_____ 626-443-7121 PUNCHING JD Machine_________801-782-4403 Group Manufacturing Serv_ 480-966-3952 Star Precision________303-926-0559
PAINTING Coating Technologies_____ 623-581-2648 Weiser Engineering__ 303-280-2778 CPCS_____________303-438-8328 REPAIR Pillar Machine______ 801-965-1900 Bearing Surface Richards Fab_________ 801-409-0392 Denver Machine Shop____303-295-6000 PLATING Hydraulic Cylinder Blanchard Metals Proc.__ 801-972-5590 Denver Machine Shop____303-295-6000 Foresight Finishing_____480-921-0000 ROLL FORMING Gold Tech Industries___ 480-968-1930 Lifetime Products______801-728-1260 PAS Technologies______ 480-487-1906 Rolling: thread Anodizing Blanchard Metals Proc.___801-972-5590 Ron Grob Co.________970-667-5320 Pilkington Metal Finishing_ 801-972-2146 ROUTERING, CNC Qualtek________ 719-598-3394 X23 Micropulse West_______480-966-2300 Copper SAW CUTTING Foresight Finishing_____480-921-0000 Diversified Metal Services__ 801-972-6093 Gold Tech Industries___ 480-968-1930 SHOT PEENING Electroless Nickel Blanchard Metals Proc.___801-972-5590 SINTERING LA Specialties________ 602-269-7612 Foresight Finishing_____480-921-0000 Western Sintering______509-375-3096 SPINNING: METAL Gold Tech Industries___ 480-968-1930 Metal Spinning Solutions__ 480-899-0939 Gold/Silver Plate SPLINES Gold Tech Industries___ 480-968-1930 Specialty Steel Services__ 801-539-8252 Nickel/Chrome/ SPRINGS Copper Foresight Finishing_____480-921-0000 Custom/Compression/Extension/Assembly/Torsion Gold Tech Industries___ 480-968-1930 LA Specialties________ 602-269-7612 Ace Wire Spring & Form__ 412-458-4831 Tin Plate Flat & Wire Foresight Finishing_____480-921-0000 Ace Wire Spring & Form__ 412-458-4831 Gold Tech Industries___ 480-968-1930 SPRING WORKS Utah____ 801-298-0113 POLISHING STAMPING Gold Tech Industries___ 480-968-1930 Dayton Rogers_______ 763-717-6303 Metalcraft__________888-280-7080 PRECISION FORMING Richards Fab________801-409-0392 Precision Die & Stamping__480-967-2038 Thompson Machine_____505-823-1453 Qualtek________ 719-598-3394 X23 Wrico____________480-892-7800 Richards Fab______ 801-409-0392 The Toolroom Inc.______ 801-773-6331 PRINTING Thompson Machine___ 505-823-1453 3D Printing The 3D Printing Store____720-443-3733 Wrico__________ 480-892-7800 A2Z Manufacturing Rocky Mountain •
52 May / June
2018
Ron Grob Co.________970-667-5320 TESTING Testing: Non-Destructive Blanchard Metals Proc.___801-972-5590 Pilkington Metal Finishing___ 801-972-2146 TOOL & DIE Newport Tool________801-295-7411
Madisen Dahl Training & Recruiting NUNTMA Chapter Exec. w 801.337.7097 m 801.710.5535
The Toolroom Inc.______ 801-773-6331 Thompson Machine_____ 505-823-1453 Wrico____________480-892-7800 Tool & Cutter Grinding BC Tool & Cutter Grinding__ 713-638-0303 Exact Tool Grinding_____ 801-712-2720 TOOLING Mountain View Machine__ 435-755-0500 Western Sintering______509-375-3096 Custom Tooling BC Tool & Cutter Grinding__ 713-638-0303 Tool Coating BC Tool & Cutter Grinding__ 713-638-0303 Tool Refurbishing BC Tool & Cutter Grinding__ 713-638-0303 WATERJET CUTTING Diversified Metal Services__ 801-972-6093 Leading Edge Machine___435-563-9425 Mountain View Machine__435-755-0500 Southwest Waterjet-Laser__480-306-7748
WELDING Able Machining & Eng.__ 801-268-6766 Advantage Manufacturing___ 877-727-0281 Dayton Rogers_______ 763-717-6303 Denver Machine Shop____303-295-6000 H& S Machine_______ 801-755-7627 JD Machine_________801-782-4403 Kustom Koncepts______ 307-472-0818 Mountain View Machine__435-755-0500 Pillar Machine______ 801-965-1900 Richards Fab______ 801-409-0392 Star Precision________303-926-0559 Weiser Engineering__ 303-280-2778
Wrico__________ 480-892-7800 Welding: Aluminum Medium & Large Skyline Products________719-392-9046 Richards Fab______ 801-409-0392 Welding: Orbital Richards Fab______ 801-409-0392
Mountain View Machine___ 435-755-0500 WIRE FORMING Flat & Wire Ace Wire Spring & Form__ 412-458-4831 SPRING WORKS Utah____ 801-298-0113 ASSOCIATIONS N. Utah NTMA________ 801-337-7097
Call to promote your business through a business card ad! Just $260 for the Year! 602.412.7696 3 Regional Publications: Southwest, West Coast, Rocky Mountain See all of our publications Online at: a2zmanufacturing.com Vol. 24, No. 2, March / Apr 2018
Southwest Edition (AZ, NV, and NM)
Competitive Engineering Inc. (CEI) Global Offering Design & Manufacturing Of Products Ranging From Surgical Implants to Outer Space
A2Z Manufacturing SW 1538 E. La Vieve Lane Tempe, AZ 85284
Stamping:Aerospace Precision Die & Stamping__480-967-2038 Thompson Machine_____ 505-823-1453 Qualtek________ 719-598-3394 X23 Stamping:Deep Draw Qualtek________ 719-598-3394 X23 Thompson Machine___ 505-823-1453 Wrico__________ 480-892-7800 Stamping:Design The Toolroom Inc.______ 801-773-6331 Stamping:Flat Forming SPRING WORKS Utah____ 801-298-0113 Thompson Machine_____ 505-823-1453 Stamping:Foil Forming Thompson Machine_____ 505-823-1453 Stamping: Light SPRING WORKS Utah____ 801-298-0113 Thompson Machine_____ 505-823-1453 Stamping:Precision Metalcraft__________888-280-7080 Precision Die & Stamping__480-967-2038 Qualtek________ 719-598-3394 X23 Thompson Machine_____ 505-823-1453 Wrico____________480-892-7800 Stamping:Prototype Thompson Machine_____ 505-823-1453 Wrico____________480-892-7800 Stamping:Short Run Thompson Machine_____ 505-823-1453 Wrico____________ 480-892-7800 SWISS SCREW MCHG. Denver Precision Products__ 303-469-1771 Pacific Swiss & Manufacturing_ 503-557-9407 Screwing: Lead
www.a2zmanufacturing.com
5353 • May / June 2018 • July/Aug 2009
A2Z Manufacturing A2Z Rocky Mountain • • METALWORKER
Index of Advertisers 5th Axis...11,43 A&L Machining...51 Accudyne Corp...36,43 Accutech Machine Inc...49 Ace Wire Spring & Form...52 Acu-Tec CNC...47 Advantage Manufacturing...48 Aero Tech Mfg...48 AMADA America...41 AME, Inc...42 APEX Engineering...51 Arizona Finishing...50 Atlas Rigging & Transfer...46 AZ Tool Steel...47 AZMark Aerospace...47 Bar-S Machine, Inc...48 Barton Mines...44 BC Tool & Cutter Grinding...49 Bemsco...48 Blanchard Metals Proc...48 BMSC...32,46 Bud’s Equipment...25,44 CAID Industries...47 Canyon State Oil ...41,42,56 Castrol ...56 Chemtool...41 Chicago White Metal (CWM)...17 CM Manufacturing...51 Coastal Metals...12,44 Coating Technologies...42,49 Current EDM Inc...45 Custom Design & Mfg...47 Custom Powder Cutting Sol...49 Davis Applied Tech College...43 Dayton Lamina...46 Denver Breaker & Supply...2,46 Denver Machine Shop...48 Denver Precision Products...50 Desert EDM Sales...29,42 Dix Metals...45 DMG...42 DMSI...47 Doosan...42 DRP Machine...50 Dynamic Design & Mfg...52 Edge Technologies...44 EDM Network...27,43 EDM Perf. Accessories...41,43 EMJD Corp....49 A2Z Manufacturing Rocky Mountain •
EPOCS Mfg...48 LeGrand. (C2G)..15,43 Erickson Metals...16,41 Level III Nadcap Consulting...46 Exact Tool Grinding...53 Lifetime Products...1,34-35 EZ-Access...22,44 Loveridge Machine...51 Faustson...32,48 Machinists, Inc..33,50 Flex-Pro...40,49 Mario Pinto...43 Flow International...41 Maverick Mold & Machine...47 Foothills Machinery...21,42 MEI Rigging...46 Foresight Finishing...52 MEP Center...46 Gage Lab Products...42 Metalcraft...50 Ganesh Machinery...46 Metal Supermarkets...43 Global EDM Supply...42 Methods West...3,41 GMA Garnet...18,42,46 Micropulse West ...47 GMN USA...36,42 Midaco...44 Gold Tech Industries...47 Mitutoyo...42 Group Manufacturing...48 MMT, A Div of Productivity ...13,41-45 H2 Solutions...43 Mountain View...47 HAAS Automation...15,41 MP Systems...41 Hangsterfers...42 Nelson Engineering...48 Heppner+Bourque..30,.46 Newport Tool...51 Horizon Carbide...43 NOCO...40 HPMP...26,53 NUNTMA...39, 53 Hurco...21,45 In-Position Technologies...28,47 O’Keefe Ceramics...22,50 Ogden-Weber Tech College...43 Industrial Heat Treat Co...49 Innovative Measuring Systems...43 OGP...42 Olympic Metals...10,44 Innovative Precision...47 Omax...41 Intech Funding...46 Orion Registrar...43 IRH...44 Pacific Swiss & Manufacturing...51 Iron & Metals, Inc..31,44 Paramount Machine...48 Jacquet West...43 PAS Technologies...48 Jaguar (JPM...19 Phoenix Heat Treating...50 JD Machine...47 Pilkington Metal Finishing...49 Jend Machinery...52 Pillar Machine...51 Jensen Precision...52 Pinnacle Precision...51 J.M. Grisley..1,.5,34-35,41-45 Precision Die & Stamping....53 Jorgenson...46 Precision Tech...51 K.D. Capital Equipment...46 Qualichem...44 King Machine...41,42,44 Qualified Rapid Products...47 Kings Peak...50 Qualtek...51 Kloeckner Metals...45 Radtech...50 Klontech Industrial...42 RAM Company...40 Knuth Machine Tools...23,44 RD Machine...52 KTR Machine...46 Resell CNC West...46 Kustom Koncepts...48 Revolution Machine Tools...44 Laird Plastics...45 Richards Fab...48 LAYKE Inc...52 RMS Assembly & MFG...24,46 Layke Tactical...45 RMTMA...28 Leading Edge Machine...50
54 • May / June 2018
Rocky Mountain Saw Blades...20,44 Roentgen USA...44 Romi Machine Tools, Ltd...44 Ron Grob CO....49 Rotarex...45 Royal Products...38,41 RP Machining, Inc. ..50 Ryerson...7,41,43-45 SA Composites...53 S&S Machinery...46 Sandvik...44 Sawblade.com...31 Selway Machine Tool...41 Sentry Insurance...46 Setco Spindles & Slides...42 Shop Tools, Inc..42 Skydandee Mfg...47 Smith Machinery...41,55 Southwest Waterjet & Laser...53 Specialty Steel Serv....18,48 SPRING WORKS Utah...52 Star Metal Fluids...9,41,43 Star Precision...48 Steel Services Grinding...49 Sun Grinding...49 Superior Grinding..8,49 Sustaining Edge Solutions...42 Temperature Processing...49 Teton Machining...50 The ToolRoom Inc...53 Thompson Machine...49 Titanium Coating Services...33,47 Toolnet International...41 Total Quality Systems...43 TVT Die Casting...37,47 TW Metals...44 Ultimate Manufacturing...43 University Federal Credit Union...46 US Carbide...41 Utah Metal Works, Inc...14,44 Vacco...49 Von Ruden Mfg...41 Wasatch Powder Coating...49 Weiser/Mile High Precision...53 Western Sintering...53 Western States Calibration...45 Western States Metals...38,42 Wrico Stamping...49 Zeiss Industrial...43
S
SMITH MACHINERY CO., INC.
M
“Technology Solutions For Competitive Manufacturing” 41 West Guest Ave, Salt Lake City, UT 801-263-6403 www.smithmachinetools.com
An ISO 9001:2008 Certified Company
41 40
1977-2017 1977-2018
Building CNC Machines In The U.S. For 43 Years
SMITH + MAZAK PARTNERSHIP
Smith Machinery Co. Thanks Its Customers For The Opportunity To Serve You! This Year, The Company Is Celebrating Our 40th Year In Partnership with Mazak! Clark Smith, 4th Generation Smith of the Family Business, Says, “Over the years we have sold more than 700 new Mazak machines to our customers in the Mountain States. We have also sold 80 Mazak 5-Axis Machines. Our experience with 5-Axis machining sets us apart. ”
ch...59 .59 achine...60 ine...60 CNC West...31,54 With Smith Machinery, You Get Consistency And Superior Service From Their Long Term Mfg...29,56 rceMfg...17,56 Fab...56 Relationships With Their Suppliers. ds Fab...56Machine...55 Precision MA...48 ..47 Mountain Blades...52 untain SawSaw Blades...52 gen USA...52 USA...52 rob CO....57 CO....57 Products...38,49 ducts...18,49 on...15,49,51-53 14 Years With Smith 10 Years With Smith 17,49,51,52,53 mposites...61 osites...61 Machinery Machinery Machinery...50 hinery...50 el Son & CO..5,23,52 on & CO..7,43,52 ade.com...7 49 ific Cutting Tools...32 com...5 9 Years With Smith Tools Inc...50 s Inc...50 Machinery Insurance...54 ndles & Slides...50 Spindles & Slides...50 s, Inc..10,50 Tools, Inc..18,50 30 Years With Smith e Mfg...55 ® ndee Mfg...55 chinery...49,63 Machinery Machinery...49,63 M...20,54 11 Years With Smith lty Steel Serv....30,56 Steel Serv....30,56 NG WORKS Utah...60 Machinery WORKS Utah...60 in Manufacturing...59 Manufacturing...59 Machine & Tooling,...34,55 l Fluids...13,49,50,51 Metal Fluids...13,49,56 sion...56 3 Years With Smith 15 Years With Smith recision...56 ices Grinding...57 Machinery ervices Grinding...57 Machinery ons Machine..58 & Sons Machine..58 Grinding..8,57 or Grinding..6,57 Metal Products...60 Edge Solutions...50 gning Edge Solutions...50 Smith Machinery’s Other Fine Lines: Acer, Sharp, CurrentEDM, Coherant Laser, Renishaw TLubricants...50 All Lubricants...50 recision Metals...51 er Tooling...36
A2Z Manufacturing Rocky Mountain 1538 E La Vieve Lane Tempe, AZ 85284
Christensen Oil Co. Provo, UT Christensenoil.com 1-800-654-0438 Serving Idaho A Z Manufacturing Rocky Mountain • 56 • MayUtah / June & 2018 2
Hasco Oil Denver, CO Hascooil.com 1-800-456-8491 Serving Colorado
Industrial