Vol. 1, No. 2 April/May 2011
Northern California, Oregon and Washington Edition
Precision Aerospace Job Shop Shortens Production Time With A Flow Waterjet
www.azmetalworker.com
THE COOLANT. THE COOLANT. We are here to help you We are here to help you boost your productivity. boost your productivity. Cutting Tool Control, Inc. 1411 NW 51st ST Contact the Blaser specialist Seattle, Washington 98107 in your area: ContactPhone: the206.789.7277 Blaser specialist in yourTollarea: Free: 800.356.2416 Fax: 206.784.8122 E-mail: CuttingToolControl@msn.com www.CuttingToolControl.com Serving Washington and Oregon
ATS Industrial Supply 2910 East Chambers Street Tool Technology Distributors, Inc. ATS Industrial Supply Phoenix, AZ 85040 2910 East 3110Chambers Osgood Court Street Phone (602) 276-7707 Fremont, 94539 Phoenix, AZCalifornia 85040 Phone Phone: (602)510.656.8220 276-7707 Toll Free: 800.335.8437 Fax: 510.656.2458 E-mail: ed@tooltechnology.com www.ToolTechnology.com Serving Northern California
Blaser Swisslube Inc. Goshen, New York 10924, Phone 845-294-3200, www.blaser.com Blaser Swisslube Inc. Goshen, New York 10924, Phone 845-294-3200, www.blaser.com
Editors Corner “The man who will use his skill and constructive imagination to see how much he can give for a dollar, instead of how little he can give for a dollar, is bound to succeed.” Henry Ford
As I travel around spreading the gospel of the A2Z Metalworking Business Development Magazines, I’m continually impressed by the very high skill level in our industry! I meet business owners, machinists, metalworkers, programmers, office staff, and sales professionals, and they all are very skilled. Some business owners have degrees in engineering and then go back for their MBA, others worked in a shop from an early age and today are acquiring 21st century knowledge on programming, or they just keep up with the latest in machine techniques and automation. One thing I continue to see are people that make things, make parts, make assemblies, create programs, create top notch routers/travelers, and that make me proud of our U.S. Manufacturing! Why are machines getting faster, and why is automation growing in the U.S.? Global competition! We are tired of the job we helped design, program, and make proto-types on for the millionth time going to a non-U.S. Company for a dime or a quarter cheaper. We know we must use our constructive imagination to exceed and improve yesterday’s run times, in this global economy. Our U.S. Manufacturing Companies are doing everything from rethinking the process and using less set ups, to acquiring new faster/better equipment. I see business owners creating cells to perform the work more efficiently, and timely, to the acquisition of robotics in the cell environment. We are trying to give more for a dollar; we are working to achieve success. This is the second issue for the NorthWest edition of the A2Z Metalworker Magazine and we are very excited by the feedback we are getting from our subscribers and advertisers. I know Linda and I endeavor to give more every day and we would like to do as much as we can for U.S. Manufacturing! Please let us know how to improve your North West magazine by calling or emailing us with your ideas. As this issue goes to print, Linda and I will be at AeroDef on your behalf, AMCON the week after, and Design to Part right after that. We see great things happening in our industry. Keep the faith! God Bless U.S. Manufacturing and God Bless our Troops!
Kim Carpenter & Linda Daly Co-Publishers A2Z METALWORKER
•
4 • April/May 2011
Precision Aerospace Job Shop Shortens Production Time With A Flow Waterje. This Month’s Shop Profile. Photography courtesy of Flow. Announcements/Releases.................... 6-7 Shop Profile....................................1,16-17 Feature Articles.............................29,34-35 Buyers Guide Equipment.................. 39-42 Buyers Guide Processes.................... 43-45 Card Gallery...................................... 39-45 Index Of Advertisers.............................. 46 Editorial................................. Throughout
Published by: A2Z Metalworker PUBLISHER/EDITOR Kim Carpenter/Linda Daly kim@azmetalworker.com Mail Address: PO Box 93295 Phoenix, AZ 85070 Telephone: (480) 773-3239 Website: www.azmetalworker.com E-mail:kim@azmetalworker.com
CONTRIBUTORS
For This Issue, We Thank All of the Advertisers You See in This Magazine, because they helped launch this new publication! Published bi-monthly to keep precision manufacturers abreast of news and to supply a viable vendor source for the industry. Circulation: The A2Z Metalworker has compiled and maintains a master list of approximately 7100 people actively engaged in the Metalworking Industry. It has an estimated pass on readership of more than 20,000 people.Our readers are based in the Pacific NW! Advertising Rates, deadlines and mechanical requirements furnished upon request or you can go to www.azmetalworker.com. All photos and copy become the property of A2Z Metalworker. The Publisher assumes no responsibility for the contents of any advertisement, and all representations are those of the advertiser and not that of the publisher. The Publisher is not liable to any advertiser for any misprints or errors not the fault of the publisher, and in such event, the limit of the publisher's liability shall only be the amount of the publishers charge for such advertising.
1. MORE 1. MORE
3. MORE 3. MORE
DISCOVERMORE MORE DISCOVER PRODUCTIVITY PRODUCTIVITY WITHMAZAK MAZAK WITH
When it comes to production, we’re all looking for ways to improve efficiency. That When it comes to production, we’re all looking for ways to improve efficiency. That means finding ways to speed up production without compromising performance. means finding ways to speed up production without compromising performance. Mazak’s HORIZONTAL CENTER NEXUS series of machines together with our Mazak’s HORIZONTAL CENTER NEXUS series of machines together with our modular PALLETECH systems give you the efficiency you need. modular PALLETECH systems give you the efficiency you need. 1. MORE accuracy, rigidity and durability with Mazak’s new 1. MORE accuracy, rigidity and durability with Mazak’s new MX Hybrid Roller Guide System MX Hybrid Roller Guide System MORE spindle selection, which provides a range of speed and 2. MORE 2.2. MORE spindle selection, which provides a range of speed and 2. MORE torque to meet a variety of workpiece material requirements torque to meet a variety of workpiece material requirements 3. MORE flexibility in unattended machining 3. MORE flexibility in unattended machining with pre-engineered, PALLETECH modules with pre-engineered, PALLETECH modules 4. MORE productivity by increasing spindle 4. MORE productivity by increasing spindle utilization through use of multiple pallets utilization through use of multiple pallets with PALLETECH system with PALLETECH system
DISCOVER MORE DISCOVER MORE WITH MAZAK. WITH MAZAK. 4. MORE 4. MORE
NEW HORIZONTAL CENTER NEXUS 6800 NEW HORIZONTAL CENTER NEXUS 6800 + 3-LEVEL PALLETECH CELL + 3-LEVEL PALLETECH CELL
www.mazakusa.com Tel: 859-342-1700 www.mazakusa.com Tel:Florence, 859-342-1700 Kentucky Florence, Kentucky
Ask a Mazak representative about the Ask advantages a Mazak representative the of this NEW about technology advantages of this NEW technology
MAGNUM PRECISION MACHINES, INC. Representing the best in metal MACHINES, working solutions since 1984. MAGNUM PRECISION INC. Representing the best in metal working solutions since 1984.
Washington Tech Center 1008 Industry Drive Tukwila, WA 98188 Office - 206-575-3390 Fax - 206-575-3397
Oregon Tech Center 27350 SW 95th Ave Wilsonville, OR 97070 63 63 Office - 503-682-9030 Fax - 503-682-9040
MAGNUM PRECISION MACHINES, INC. MAGNUM PRECISION MACHINES, INC. MAGNUM PRECISION MACHINES, INC. MAGNUM PRECISION MACHINES, INC. MAGNUM PRECISION MACHINES, INC. MAGNUM MACHINES, INC. 8448 Washington Place N.E. 12025 Rojas Drive, Suite ‘A’ 3614 E.PRECISION Southern Avenue #1 8448Albuquerque, Washington Place N.E. 12025 Rojas TX Drive, Suite ‘A’ 3614Phoenix, E. Southern Avenue #1 N.M. 87113 El Paso, 79936 AZ 85040 Albuquerque, N.M. 87113 El Paso, TX 79936 Phoenix, AZ 85040 Tel: (505) 345-8389 Tel: (915) 856-7900 Tel: (602) 431-8300 Tel: (505) Tel: (602) Email:345-8389 magnumalb@magnumabq.com Tel: (915) Email:856-7900 sales@magnumep.com Email:431-8300 sales@magnumaz.com A2www.magnumprecisionmachines.com Z METALWORKER • •Nov/Dec 2010 Email: magnumalb@magnumabq.com Email: sales@magnumep.com Email: sales@magnumaz.com A2www.magnumprecisionmachines.com Z METALWORKER • •Nov/Dec 2010
Announcements & Releases Ganesh Expands Training Area Ganesh Machinery has greatly expanded the classroom training area at their Chatsworth campus to accommodate the needs of their customers. The new 500 square foot classroom is equipped with computers and projection equipment to facilitate an efficient transfer of the knowledge necessary to make the Ganesh 7 & 8-axis machines as productive as possible. Harvinder Singh, President of Ganesh Machinery, stated, “our business model relies on the satisfaction of our customers and their ability to get the highest level of performance out of their Ganesh machines.” Ganesh Machinery will be celebrating their 26th anniversary this year with an open house in August. Brand new machines will be making their debut there. The new 7-axis turn/mill center and the 5-axis machining center, along with 20 other machines will be under power. Ganesh is celebrating this milestone as a commitment to their vision of helping manufactures excel in their business by providing reliable, value focused machine tools and the outstanding support to make them productive assets.
Mazak Introduces Flexible STX RTC Laser System The Mazak STX RTC 2D laser system has been designed for job shops to help them differentiate and diversify the services they provide. This unique machine not only laser cuts thin to thick sheets of flat material, but also has an integrated rotary chuck to cut tubes and pipes, an extended Z height for cubic components, a standard tapping head and even chamfers, all on a single machine.The rotary table cuts round pipe up to a maximum diameter of 14.76”, and square tubes up to 6”.The large 16.14” range of Z travel enables you to laser cut preformed parts and other 3 dimensional shapes requiring greater cut height. The STX Mark III RTC is available in 2,500 (0.75” Mild Steel) or 4,000 (1” Mild Steel) watt configurations and accepts upto a 5’x10’ sheet of flat material. It can be delivered with a large range of automated material handling systems including Load/ Unload Cells and Flexible Manufacturing Systems. For more information, please visit www.mazakoptonics.com, e-mail sales@mazaklaser.com. Locally, please contact DW Machinery Sales at 425-827-6931 or go to www.dwmachinerysales.com.
CNC Machine Services Inc. Expands its Team! CNC Machine Services Inc. welcomes back Tim Bradley to the CNC Machine Services Team. Tim was a member of our service team from; 1997 through 2005 and is once again a member of our Washington Service team. Tim specializes in repairs on Okuma and Mazak machines, as well as most FANUC controlled machines. A2Z METALWORKER
•
6 • April/May 2011
CNC Machine Services Inc. is also pleased to announce the new look of ourWashington Sales team. You have trusted Mark Harris, President of CNC Machine Services Inc., to service your machine tools for the last 25 years. Now Mark Harris and his sales team, along with Craig Arrowood are the ones you can trust for your new machine tool purchases. Mark’s 30 years of experience in the machine tool industry have gained him exceptional technical expertise, and the trust that comes from many years of dealing with integrity!Welcome back Mark Harris as the Sales Leader for Machine Services Inc! CNC Machine Services will host an Open House at the end of July showcasing a wide variety of top level machine tools. Don’t miss this open house, it will be GREAT!!! For more information, contact CNC Machine Services Inc. at 425.788.4500 phone,866.788.4500 toll free, www.cncmachineservice. com.
Next Generation Cutting Head From Flow Flow International is pleased to introduce the latest industry benchmark in Abrasive Cutting Head performance, the Paser 4 Abrasive Cutting Head System. The Paser 4 Cutting Head is now available for Flow Abrasive Waterjet Shapecutting Systems operating at either 60ksi or 87ksi pressures. The Paser 4 Cutting Head System consists of the Paser 4 Cutting Head, the Paser 4 Abrasive Metering Valve, and the new Low Profile On/ Off Valve. These new products can easily be retrofitted to existing installed FlowWaterjet machines so operators can immediately begin to enjoy the benefits of this new technology. Paser 4 UCL (Ultra Component Life) Patent Pending Cutting Head Flow’s newly designed cutting head establishes a new industry benchmark with the fastest possible cutting speed and the lowest possible operating cost. Flow continues to raise the bar in performance by incorporating new patent pending technology to significantly extend component life. This means lower cost of operation since fewer parts and abrasive are consumed and time between maintenance intervals is greatly reduced. Orifice component life is increased 3-6 times over earlier generations and competing cutting heads. Flow customers are already realizing significant benefits as a result of the Paser 4 cutting head. “The Paser 4 UCL cutting head is awesome – it has saved me a lot of time and money in my business,” said Kevin Dexter, president, Andex Laser.
“We served as a beta site for the product, and now have 9 months and 1,400 hours of operation on the Paser 4 cutting head on our Flow 60ksi waterjet without opening up for maintenance, which is tremendous.”
INTRODUCING...“NEW” PRODUCTS FROM THE NAME YOU CAN TRUST...
IC R O OO
®
super carbide tools
Mazak Announces Increased Production for 2011 Mazak has announced increased production levels at its facility in Florence, Kentucky. Fueled by the economic recovery, the company has experienced a steady increase in demand over the past nine months particularly after the IMTS Show in Chicago. Mazak projects monthly output of its Florence plant to reach 130 machine tools per month by the close of Q2 2011 and growing throughout the remainder of 2011. In terms of dollar value, this will represent the largest output ever produced at the plant, due largely to market demand shifting the production mix to favor larger and more complex Multi-Tasking models of machines. “Over the past two years, Mazak continued to invest heavily in the ongoing productivity of our U.S. production facility, despite the poor economic conditions of 2009,” says Brian Papke, president of Mazak. “We have further refined and improved our Production on Demand system to become extremely responsive to real time customer needs. Additionally, a high level of vertical integration allows us tremendous control in reacting to market conditions. With the present value of the dollar, we will be exporting more machines in future months from our Florence plant, in addition to building for domestic manufacturers.” Mazak produces over 100 models of machines tools at its Florence plant. During the economic downturn, the company invested $13 million in expanding the facility’s capabilities through additional floor space and technology upgrades. Similar investment will continue into 2011, with the installation of another VERSATECH V-140N 5-axis double-column machining center for large part production. Mazak will also be adding a Mazak Optonics cell with three laser fabrication centers in 2011 to improve productivity of sheet metal parts.
CO EFFE ST C TOOLITIVE NG
HIGH QUALITY...ULTRA PRECISION...
QUICK-CHANGE TOOLING SYSTEM
NEW BORE GROOVE FACE GROOVE PROFILE THREAD
QUALITY...Through Manufacturing Excellence!
i cr o QuIk
®
QUICK CHANGE TOOLING
Unique “3 POINT” Locking/Locating Tooling System Engineered for Maximum Tool Rigidity and Centerline Repeatability within +.0005” from Tool to Tool! Reduce Machine...Setup, Downtime, Tooling Costs, Tooling Inventories while Boosting Productivity! Tools Manufactured with the... Exclusive... MICRO 100 Proprietary Process! PROUDLY MADE IN THE
MICRO 100 TOOL CORPORATION 1410 E. Pine Avenue Meridian, ID. 83642
USA
800-421-8065
208-888-7310
www.micro100.com
Contact your local Authorized Micro 100 Distributor or Sales Representative today for more details!
Max Steinbach Micro 100 Tool Corporation Northwest Sales Manager
Phone: Fax: Email:
800-421-8065 208-888-2106 msteinbach@micro 100.com
our ability to service our customers in the Southeastern USA,” Mr. Bassett explained. He added that “AP will now be selling Samuel’s full range of carbon, stainless and aluminum products and will also be opening a facility in the Tampa/Orlando area in the near future”. Founded in 1855, Samuel, Son & Co., Limited is one of the largest metal processors and distributors in North America, operating from 52 service center locations and 47 manufacturing locations. Samuel also has facilities in the UK, Australia and China.
Samuel Announces the Purchase of AP Specialty Metals
Learn About Hogue Precision, aWomanOwned, Veteran-Owned Business
Wayne Bassett, President and CEO of Samuel, Son & Co., Limited today announced the acquisition of metals distributor AP Specialty Metals. AP operates from a 48,000 square foot facility located just north of Atlanta in Alpharetta, Georgia. AP Specialty’s current product line is stainless sheet, bar and plate and aluminum sheet. Their processing facilities include a 60” cut-tolength line, a 60” coil to coil sheet polisher and a 60” sheet to sheet polishing line.
Hogue Precision is a small, woman-owned, veteran-owned business that was established in 1991.
“AP Specialty is a great addition to the Samuel Group of companies. It will be linked with our current facilities in Florida, Alabama, South Carolina and North Carolina to significantly enhance
Gail Hogue, owner, says, “ We take pride in offering state-ofthe art equipment at affordable prices, backed by factorytrained service engineers. We carry a full range of vertical and horizontal CNC machining centers, bridge mills, lathes and 5-axis machines. “ For more information, go to hogueprecision.com. A2Z METALWORKER
• 7 • April / May 2011
scrambling to boost inventory levels and started either buying other companies or looking for capital investment in new manufacturing. Intel was among the first to join the hiring binge. The company is investing $6 billion to $8 billion in upgrades to its fabs in Chandler and Oregon to handle new production, and it started advertising for positions the day before that announcement was made. Recently, the company announced it will build a new $5 billion facility, Fab 42. Although officials wouldn’t comment on how many jobs it might create, company officials said a fab of that size typically has 1,000 employees.
Record 2010 revenue could spur more jobs in semiconductor industry Semiconductor hiring may be gearing up again two years after the industry plunged into a dark hole of economic cutbacks. Globally, the industry has experienced what amounts to a V-shaped recovery. After cutting hard in late 2008 and 2009, last year presented record revenue across the board as consumers and businesses purchased technology devices.“Companies have been running mean and lean for so long, and you can only do that for so long before you have to hire someone,” said Jim Feldhan, founder and president of Semico Research Corp. Much of the hiring is based on increased demand for products amid severe semiconductor sector belt-tightening when the Great Recession bore its full weight on the economy. Chip sales slid from $255 billion worldwide in 2007 to $248 billion in 2008 and $226 billion in 2009, giving the industry two consecutive down years for the first time, according to the Semiconductor Industry Association. Intel Corp., ON Semiconductor Corp., Microchip Technology Inc. and other players slashed inventory and implemented either layoffs or furloughs. But the industry came roaring back last year, setting a global revenue record of $298 billion, when market research firms such as Gartner were projecting it would rebound to about $233 billion. Companies were A2Z METALWORKER
•
8 • April/May 2011
Microchip, whose analog semiconductors are used in an array of products, has reported record revenue during the past year. Companywide, Microchip is recruiting for about 200 positions. A glut of experienced workers and recent graduates has meant the company’s hiring needs fit in with a good recruiting market, Carr said. “The market is in our favor, though it is picking up everywhere,” she said. Feldhan said increasing growth in devices such as notebook and tablet computers is driving demand for the chips and components. Companies also have done a better job of diversifying their fields. When Intel develops a reference plan for computers using its chips, companies such as ON work to get their equipment included in those plans, thus creating demand, Feldhan said. Those plans are like a recipe, and other companies can be listed as providers of the recommended ingredients.
SERVING THE WEST COAST SINCE 1997 NO MINIMUM ORDER! SOURCING HARD TO FIND ITEMS! LOCATIONS IN CALIFORNIA - OREGON - WASHINGTON
ANY METAL - ANY SIZE - CUT & READY - FAST! •
Production Cutting
•
Maintenance Departments
•
Stocking Programs
•
Machine Shops
•
Certified Material
•
Government
•
Fabrication Services
•
Hobbyists
•
Hole Punching
•
Prototypes
•
Rem Sales
•
Artists
•
Delivery
•
Aerospace
•
Shearing
•
Walk-Ins Welcome
ONE STOP SHOPPING CALIFORNIA sales@msccalifornia.com
866-867-9344 24-7 SERVICE
Raytheon bomb ready for flight testing Raytheon Co.’s Small Diameter Bomb II is ready for captive flight testing after passing a U.S. Air Force critical design review.
The SDB II is an air-launched, precision-strike standoff weapon that can be used against moving and fixed targets in adverse weather conditions, the company said. The weapon incorporates an improved seeker that features three modes of operation: millimeter-wave radar, uncooled imaging infrared and semi-active laser. “Raytheon’s SDB II features a mature tri-mode seeker and a cutting-edge warhead, and completing the CDR proves our design is producible and mature,” said Harry Schulte, Raytheon Missile Systems vice president of Air Warfare Systems. “Raytheon has an affordable and executable plan to deliver a robust engineering and manufacturing development program.” Tom White, Raytheon’s SDB II program director, said that using an uncooled seeker and other approaches, improves weapon reliability and reduces production and life-cycle costs.
FOR ALL YOUR METAL NEEDS OREGON & WASHINGTON sales@mscwashington.com
Details of the critical design review by the Air Force weren’t disclosed.
Northrop Grumman, Air Force test anti-missile laser on KC-135s Northrop Grumman and the Air National Guard’s 190th Air Refueling Wing have finished the first round of flight testing with the company’s Guardian anti-missile system on a Boeing KC-135 stratotanker, Northrop announced recently. “The feedback from the flight test pilots has been overwhelmingly positive,” Col. Keith Lang, commander of the 190th ARW, said in a news release. “We are pleased at the partnership established with Northrop Grumman and remain encouraged that the attributes of the Guardian System will prove a viable option for providing aircraft protection without disruption to KC-135 missions. The KC-135 has flown in harm’s way since Vietnam and the time is right to add this extremely important defense capability.” The laser-based Guardian System, contained almost entirely in a single pod mounted to the underside of the fuselage, is designed to detect launched missiles and then disrupt their guidance signals using a nonvisible, eye-safe laser, according to Northrop Grumman. A2Z METALWORKER
• 9 • April / May 2011
SunPower Signs 48-Megawatt Solar Power Supply Agreement with Toshiba SunPower Corporation announced that, under a strategic supply agreement, Toshiba Corporation)will order 48 megawatts of high-efficiency solar panels from SunPower during the 2011 Japanese fiscal year ending March 31, 2012. Toshiba will use the panels to support the company’s residential solar offering in Japan, which was launched last year with a supply agreement for 32 megawatts of SunPower panels. “Japan is the leader in Asia in the residential solar market, which is an excellent fit for SunPower’s world-leading, high efficiency solar panels,” said SunPower CEO Tom Werner. “We are pleased to extend our partnership with Toshiba, a global business leader, to make high-efficiency SunPower panels available to more homeowners in Japan who value our reliability and guaranteed performance.” “Since we launched our residential solar business in Japan early last year, we have recorded solid achievements by implementing comprehensive sales and marketing activities, including expansion of sales channels,” said Takeshi Yokota, general manager of Photovoltaic Systems Division, Toshiba Corporation. “We look forward to building on this success and increasing market share in Japan by further reinforcing our partnership with SunPower.”
SBA Chief Discusses Initiatives To Aid Small Companies Under the headline “Getting Money Into The Hands Of Small Businesses,” the Wall Street Journal reports an interview with Karen Mills, head of the Small Business Administration and a former venture capitalist. Under her tenure the agency has loaned out roughly $2 billion in stimulus funds, supported $40 billion more in loan guarantees, and taken a number of steps to encourage hiring and boost small companies’ ability to become successful exporters.
“We decided to be very bold in getting money out into the hands of small business as quickly as possible. As a result, tens of thousands of businesses were able to get credit in a market where the banks had really frozen them out,” Mills said.
JSF Radar Absorbent Coatings Applied to Raptor The newest F-22 stealth fighters produced for the U.S. Air Force at Lockheed Martin’s factory have improved radar absorbent coatings derived from the company’s F-35 Joint Strike Fighter program.
on the durability of those coatings. The benefit for the Air Force is a reduced maintenance burden, Babione said. “[The F-35 program] had some more robust materials that were more durable and we were able to pull those back on to the F-22,” he said. “So our system is better, and the life-cycle cost of the F-22 is reduced.” Dan Goure, an analyst at the Lexington Institute, Arlington,Va., agreed that retrofitting the F-22 with the F-35’s coatings will save the Air Force a significant amount of time and money when it comes to maintenance. “It’s not going to transform the airplane, but what it’s going to really do is make it much cheaper to operate the F-22 fleet, which is terribly important given its small size,” he said. Despite Lockheed Martin’s statement that the F-35derived coatings would not alter the F-22’s radar crosssection, Goure said he suspects the new materials are likely to improve upon the Raptor’s already impressive signature. “I would be very surprised if this wasn’t an improvement in stealth characteristics,” he said. Lockheed Martin only had to make minor tweaks to the F-35’s radar absorbent materials in order to adapt the technology to the F-22. Though the radar cross-section requirements for the Raptor and the F-35 are slightly different, fundamentally the physics and chemistry of the coatings are the same, Babione said. For installation into the Raptor, the F-35 coatings likely needed to be modified to deal with the high supersonic cruise-speeds and extreme altitudes at which the F-22 routinely operates, Goure said. “It’s operating at a higher altitude typically and [at] faster speeds, and that would put different stresses on the material,” he said. The Raptor can cruise at speeds around Mach 1.8 above 50 000 feet without afterburners. At the moment, the latest Lot 9 production F-22s only have some of the new stealth coatings installed.
“Some of the [low observables] coatings system and gap-fillers that the F-35 had an advantage on, we have incorporated into the Raptor,” said Jeff Babione, vice president and general manager of the F-22 program for Lockheed Martin.
Other improved stealth materials “are still in final qualification testing and will enter the field next year,” he said.
The new materials do not alter the F-22’s radar cross-section, but do improve
Once testing is complete, plans are in place to retrofit the entire F-22 fleet with the coatings.
A2Z METALWORKER
•
10 • April/May 2011
PromacLAadjune
7/19/10
2:48 PM
Page 1
Looking to Increase Productivity??
ProMac
™
is Your Answer!! Tightly controlled chemistry ensures optimum composition. Resulting in good chip breaking & reduced wear of carbide tooling.
Available Only at Samuel · Rounds, Hex & Squares · 303, 304/L & 316/L · Your Source for: Non-Standard Sizes/Lengths
ProMac® is a Premium Quality Stainless Steel Designed for Enhanced Machinability. Processed to Provide Uniform Consistency of Properties... Bar to Bar & Heat to Heat.
ProMac Provides Significant Benefits: Faster Machining - Allowing Higher Speeds & Feeds Better Dimensional Tolerances on Machined Parts Superior Machined Surface Quality & Integrity Consistent Performance for On-Time Production Longer Tool Life Reduced Scrap Loss
Applications: Pumps, Valves, Shafts, Fittings, Flanges, Nuts, Bolts, Pins, Rotors, Impellers
Industries:
Oil & Gas Exploration, Chemical & Petrochemical Processing, Biofuels, Pulp & Paper Food & Beverage Processing, Construction, Pharmaceutical & Aerospace
To get Your trial underway, give us a call Today!!
1-888-726-6385
promac@samuel.com
www.samuel.com A2Z METALWORKER
• 11 • April/May 2011
New &
New & Rebuilt EDMs, Parts & Service New & Rebuilt EDMs, Visit Us At Rebuilt EDMs, Parts Service Parts && Service Booth 1270
All New A-Series Wire Cut! • Advanced compact design • Renowned quality and accuracy • Intel PC/Fanuc Post Processor • World’s Fastest AWT <10 seconds • Built-in B Axis (6 Axis continuous) (Opt.)
Chmer Offers:
• Wire EDMs 15 Models • Sinker EDMs 22 Models • EDM Drillers 7 Models “EVERYTHING IN EDM”
EDM Network: Exclusive Distributor of CHMER EDM
1974 Bucktail Lane, Sugar Grove, IL 80554 1-888-289-3367 • www.edmnetwork.com / CA • 951 306 4017 • info@edmnetwork.com
Industry for record Defense heads Cuts Will Shift deliveries Money To Repair Of Existing Equipment Airbus and Boeing are on course to ship more than 1,000 aircraft this year, but can the airlines absorb all these new jets? By Marjorie Censer
Airlines will digest more new mainline airliners than ever before When Defense Secretaryrise Robert M.and Gates announced cutsthe last in 2011, as deliveries by 5% surpass four funding figures for month, some in the defense industry shuddered. But for others, the first time. announced cuts will generate new opportunities to revitalize older systems. Shipments were effectively flat last year, as Airbus’s slight increase was offset by a for small declinetermination in deliveries Seattle. Airbus It’s not unusual a program tofrom refocus attention on anagain older out-produced its rival for the eighth year in succession - deliverprogram, but analysts said this shift may become more common as the ing 510 aircraft. Pentagon’s budget tightens and it is forced to work with the equipment it already owns. This breaks its previous all-time output record of 498, set the year before. Boeing’s 481 in will 2009endtoa This time around, Gatesdeliveries announcedfell theslightly Defensefrom Department Marine Corps vehicle program with prime contractor General Dynamics 462, with the absence of 787 shipments beginning to tell on the and will instead directAs money toward and upgrading existing airframer’s output. a result, therepairing two rivals’ combineditsdelivery amphibious assault vehicle, built by BAE Systems. Additionally, he tally, 972 aircraft, was down slightly on the 979 delivered indelayed 2009, part of at Lockheed strike-fighter which the timeMartin’s was an F-35 industry record. aircraft program and said the Pentagon would buy more of Boeing’s F/A-18 aircraft.
on large-scale andwas modernization older equipment, outlook that,repair he says, prevalent aofyear ago. “A lot ofHarrison experts added. “As a result, still have . . . thisinlagging need to recapitalize were talking aboutwe a 30% reduction our production and Boelarge of our force,” he said. ing’s parts production, and that it was inevitable there was going to be a double-dip recession,” he says. The defense industry, keeping a close eye on programs vulnerable to cancellation, is now positioning itself for these repair efforts. Even the International Air Transport Association “was predicting the airlines would have the worst year they had ever had in the BAE Systems is hoping to win work repairing its amphibious assault history of international aviation. Well, none of that turned out to vehicle, but the company anticipates competition. be right,” points out Leahy, adding that the industry is “resilient” and is “coming back”. “We don’t expect to get any favoritism out of the customer because we are the [original manufacturer], but I do think there are some advantages Thebeing 780the narrowbodies produced Airbus BoeingBAE’s last year of designer of this vehicle,”bysaid Ann and Hoholick, vice accounted for about 80% of their total deliveries. president of new vehicles and amphibious systems.
Both manufacturers are progressively up toprepared reach atocomFaced with a tighter budget, BAE has triedramping to be equally bid on a new program or a competition to modernize bined output of almost 80 single-aisle aircraft a older monthsystems, within said the Bob the company’s vice president for product nextMurphy, two years, based onexecutive already announced increases. Andsectors. both “You get wedfurther to any boosts one thing, because all Itake can tell is, as the are can’t evaluating which could theiryoucombined future unfolds, like a very high priority monthly rateswhat into looks the 90-100 aircraft range. today . . . can change very rapidly,” Murphy said. “You’ve got to be prepared for the change.”
However, this will change in 2011 as the two manufacturers ramp “I think that there are going to be more and more examples like that,” up output across both their single-aisle and widebody lines. Boeing said Todd Harrison, a defense analyst with the Center for Strategic and should finally begin to ship Dreamliners to customers, as well as Budgetary Assessments. the stretched 747-8.
Airbus expects its deliveries this year will rise to about 520-530 Loren Thompson, a defense industry485-500 consultantshipments at the Lexington Institute, aircraft, while Boeing forecasts - its final tally said it’s common for a program termination to create new work on an dependent on how successful it is getting series production of the existing piece of equipment. But, often “the company that benefits from 747-8 and 787 under way. Whatever happens, production should a cancellation is not the company whose program is canceled,” he said. surpass 1,000 units for the first time.
Because the military in recent years invested in many new programs, Airbus’s chief salesman John Leahy shrugsit did off not thespend pessimistic which in lots of cases have not come to fruition, as much
“In this environment, weapons spending is a zero-sum game,”Thompson “But there arecompany’s certain areas concern. Both Airbus added. “One gain of is another company’s loss.”and Boeing are
A2Z METALWORKER
• 12 • April/May 2011 22 • Jan/Feb 2011 • 30 • Nov/Dec 2007
A Z METALWORKER • A2Z METALWORKER 2
using new, very high A330 and 777 rate plans as a way of hedging against a successful 787 ramp-up. But the market does not need 10 a month of all three types, particularly if the A350 XWB arrives on time.” PRODUCTION PEAK Before 2009-10, when mainline airliner production has been at its highest, the industry’s output previously peaked at 914 units in 1999. During that year, Boeing shipped an impressive 620 aircraft as production of its then newly acquired McDonnell Douglas plant in southern California was still in full swing. From a sales perspective, Airbus and Boeing’s combined order total is heading back towards the boom times of the last decade, but at 1,104 units is still well short of 2007’s peak, when their net sales exceeded 2,700 aircraft. Airbus’s usual late orders spurt again enabled it to leapfrog its rival and end 2010 as top dog.The airframer’s salesmen managed to add more than 200 orders in December, taking its net order tally beyond Boeing’s 530 aircraft, to 574. The two companies suffered 165 cancellations between them, with Boeing coming off worse on 95. The combined order backlog rose slightly during 2010 to 7,000 aircraft - or roughly seven years of production at current rates. This will be heading back towards the industry’s all-time high of
7,500 orders when it peaked in 2008, as both manufacturers look likely to sell more aircraft than they build this year.
Cupertino Electric Completes Construction of One of the Nation’s Largest Ground-Mount Solar Systems Cupertino Electric, Inc.’s (CEI) Energy Alternatives Division announced at a dedication ceremony in Porterville, Calif. the completion of a five million watt (AC) solar photovoltaic (PV) ground-mount system designed and built for Southern California Edison (SCE).The fast-track solar PV project ranks as California’s largest utility-owned solar PV-generating station.
“The large-scale project designed and built by Cupertino Electric will help SCE generate enough power at its peak to serve 3,250 average Central Valley homes using clean natural resources,” said John Curcio, chief commercial officer for CEI. “This large-scale project in a condensed time period required an immense amount of coordination, attention to detail and focus on safety to achieve a successful result.” “Cupertino Electric used an innovative and flexible approach to constructing our Porterville solar facility,” said Rudy Perez, manager of SCE’s Solar PV Program. A2Z METALWORKER
• 13 • April / May 2011
Local: (909) 887-6610
19760 Cajon Blvd.
Toll Free: (800) 811-7466
San Bernardino, CA 92407
US Army to Build Robot and Android The US Army is developing a new robot, the Cheetah, capable of outrunning the fastest man on Earth and a Terminator-type android, Atlas robot, that will work alongside troops. Boston Dynamics has been awarded the multimillion-dollar contracts by the US Department of Defense (DoD) and hopes to build the first prototype in 20 months. The four-legged Cheetah will have a flexible spine, articulated head, and will be able to sprint, take sharp corners, zigzag and reach speeds of 20mph30mph.
the army, according to the Daily Mail. Boston Dynamics president and lead investigator on the project Marc Raibert said the US DoD was not so focused on the ultimate use of the robots. “They’re most focused on developing the technology and seeing what uses they can be applied to,” he added.
Boeing starts assembling first production P-8A Poseidon The Navy plans to purchase 117 of the 737-based Poseidon anti-submarine warfare, anti-surface warfare, intelligence, surveillance and reconnaissance aircraft to replace its turboprop Lockheed Electra-based P-3 Orion fleet. The Navy awarded Boeing a $1.6 billion contract for the first six production P-8A Poseidons in January, following up on contracts for two static-test P-8As and six flight-test aircraft.
The Atlas robot will have a body, two arms, two legs and no head and will be able to walk over rough terrain, fit through tight gaps and crawl on its hands and knees if needed.
“Boeing will deliver this first aircraft to the Navy on schedule in 2012 in preparation for initial operational capability, which is planned for 2013,” Chuck Dabundo, Boeing vice president and P-8 program manager, said in a news release.
The prototype will be a more technologically advanced version of the Petman robot, which is used to test out chemical weapons protection suits for
The first production P-8A fuselage arrived from supplier Spirit AeroSystems last month and was loaded into a tooling fixture, Boeing said. Workers have since started installing systems, wires and other small parts.Boeing has refitted an old site in Seattle for P-8 military systems installation and testing.
• 42 • March/April 2011 14 • April/May 2011
A2Z METALWORKER
A Z METALWORKER 2
March 2011.indd 42
•
1/28/11 7:42 PM
Homeland Security looked into cover t body scans The Homeland Security Department paid contractors millions of dollars to develop and study surveillance systems that could covertly track pedestrians and check under people’s clothing with airport-style body scanners as they enter train stations, bus depots or major events, newly released documents show.
Since 1979 3305 Edison Way, Fremont, CA 94538
www.permach.com
Ph: 510-249-1000 Fax: 510-249-9265
Largest Inventory in Northern California and Nevada New - Used - Service - Training - Financing - Applications
Two contracts the department signed in 2005 and 2006 were part of its effort to acquire technology to find suicide bombers in a crowd of moving people, according to documents given to the Electronic Privacy Information Center (EPIC), a privacy-rights group that is suing Homeland Security.
The Ultimate machining Power
The department dropped the projects in a “very early” phase after testing showed flaws, Homeland Security spokesman Bobby Whithorne says. EPIC lawyer Ginger McCall says the project is disturbing nonetheless because it shows the department “obviously believed that this level of surveillance is acceptable when in fact it is not at all acceptable.”
SHOWROOM OPEN M-F 8:30-5PM A $1.9 million contract with Rapiscan Systems, which makes airport body CALL BOB OR ROB KROHA TODAY!. scanners, asked the company to develop similar machines for “covert inspection of moving subjects” and to find explosives on suicide bombers eastern University in Boston to test systems that could potentially “through clothing, backpacks and other packages.” The contract was “monitor and track individuals in a crowd.” Northeastern studied signed in 2005. video cameras, imaging equipment similar to body scanners and radar, which can spot people at a distance. Rapiscan’s airport body scanners require subjects to stand still while the machines create an image of passengers underneath their clothing After receiving Northeastern’s reports, Homeland Security decided to reveal hidden weapons. EPIC has sued the department to stop against trying to develop a prototype machine, Whithorne says. their use, saying the machines violate privacy. Rapiscan Vice President Peter Kant says the company gave Homeland Security a prototype machine designed “primarily for non-aviation settings” because it could scan people while they were moving. Lab tests of the prototype resulted in the project being dropped, Whithorne says. In 2006, the department signed a $1.3 million contract with North-
Using systems to covertly scan pedestrians “would be a clear violation” of laws against unreasonable searches, McCall says. “If you are walking down the street, this allows them to digitally strip-search you and rifle through your belongings without any sort of justification,” she says . Homeland Security studies privacy implications of technologies before they are used on the public. The department dropped the two projects “before we even got to the privacy assessment phase,” Whithorne says. A2Z METALWORKER
• 15 • April / May 2011
PRECISION AEROSPACE JOB SHOP SHORTENS PRODUCTION TIME WITH A WATERJET manufacturing/production manager at Vector Industries. “However, sometimes that meant that we didn’t get our finished parts out to our aerospace customers when they wanted them. For aerospace companies, time is money. Just-in-time delivery was the main reason we acquired the waterjet.” Searching for the Right Equipment and Partner
Waterjet operator confidently operates the Mach 2 after only a few days of training When aerospace customers are waiting for a part, both speed and quality are critical. Adding a waterjet expanded this shop’s capabilities and significantly shortened the time from raw material to finished part. Vector Industries, located in Everett, Washington, has served the Aerospace Industry since 1989. Within their 50,000 square foot facility, they provide a wide range of services including fabrication, machining, heat-treating, stretch forming, and hydro forming. They are AS9100/ISO9001 registered as well as NADCAP (National Aerospace and Defense Contractors Accreditation Program) approved for heat-treating Aluminum Alloys. NADCAP requires very stringent processes to ensure products made for the aerospace industry meet the highest manufacturing standards. Time is Money In order to meet their customers’ tight schedules, the company has consistently streamlined their processes to ensure a smooth production flow from cutting flat stock to final delivery of heat treated parts, without affecting quality. Under the guidance of owner Jack Giddens, they have carefully upgraded their equipment to expand their capabilities and to provide more services to their customers. They had been outsourcing their stainless steel cutting to a waterjet job shop since 2000. They started looking at waterjets in 2004, visiting tradeshows and talking with other waterjet users. However, they weren’t ready to bring the work in-house until they were approached by an aerospace customer that had a lot of hard steel, such as 17-7 and 4130, to cut. Milling this material can be very expensive because tools wear so much faster. It was time to purchase a waterjet. “We had become familiar with waterjet capabilities because we were outsourcing our stainless steel cutting to a job shop,” says Mike Morin, A2Z METALWORKER
•
16 • April/May 2011
Now that the decision was made to purchase a waterjet, next came the question of what brand from which manufacturer? “We looked at four or five companies and several different products. We wanted a company that could provide us fast response time both in service and parts. We also wanted to work with a company that had quality equipment and a quality reputation.” The company met several times with each supplier and contacted their customers. Vector Industries selected a Mach 2 waterjet system controlled by the FlowMaster® software suite from Flow International. “We were impressed with Flow’s reputation for integrity,” explains Morin. “They have a variety of options to choose from including price, table size, cutting power and features.We liked the rigid steel construction of the Mach 2, it is a beefy machine. We also liked the ball screw drive system to ensure accuracy as well as the capabilities of FlowMaster software used to operate it.” Fast Startup, Fast Cutting Although they have only had the waterjet for three months, they are already running the system 4 to 6 hours a day cutting a wide variety of materials and thicknesses ranging from 4” 7075 Aluminum plate, 2” A36 Steel, Hastalloy, Inconel and a wide variety of Stainless Steel. “The software was easy to learn and the system is very user friendly,” says Morin. “We attended Flow’s training classes and they took us step by step through programing, operating and maintaining the waterjet. I brought one of our sheet metal fabricators with me for the programming portion. He had no background in programming, running a CNC, or even working on a computer. Now he does our programming for us. That shows how easy the software is to use. ” When the equipment arrived and was installed, they had programs ready to go and the waterjet operator was able to start production immediately. “Flow’s people have also been very helpful during the start-up process. They
treatment of parts,” says Morin. “By adding the waterjet, we can turn out a large number of different part numbers and products in a shorter period of time. The FlowMaster software also helps us in our quoting. This has been one of the best plug-and-play pieces of machinery we have.”
#2
#1
#3
#5
#4
Vector Industries is very happy with their purchase of the Mach 2 waterjet from Flow International. It is used to cut much of their aluminum, stainless and exotic materials. As Jack Giddens, owner, sums it up, “The price, quality and capabilities of the Mach 2 system were just right for us. Because of the FlowMaster software, we can cut R&D parts, short runs, or tightly nested production runs. It gives us a lot of flexibility.” AboutVector Industries
FiveVery Different Parts From Different Materials
All pieces were initially cut on the waterjet. Some were later milled, formed, or heat treated. 1. 17-7 Stainless later heat treated, cad plated, and primed to be used as an engine Nacelle seal 2. Aluminum 7075-0 bracket that was hydro-formed and then heat treated to 7075-T6 condition 3. Aluminum retainer also made of 7075-0 heat treated to 7075-T6 condition 4. 15-5 Stainless 1/4” thick spacer 5.Inconel bolt retainer for areas of heavy vibration
are very knowledgeable and have helped us as questions arose,” says Morin. “For example, Brian Metcalf and Adam Mooneyham have been showing us tips and tricks on how to get the most out of our FlowMaster software. It’s a really powerful program.” The waterjet allows them to turn around product in a shorter time. Some parts are cut on the waterjet before final fabrication or heat treating while others such as plate are rough cut to near net shape and finished on a 5 Axis milling center. Parts that took 25 to 35 minutes to run on a mill can now be cut on the waterjet in 10 minutes or less, allowing them to be more competitive in the quoting process.
Vector Industries, Inc., founded in 1989, is a world class precision manufacturing and assembly company for the commercial and aerospace industry. Our sister company BlueStreak Finishers, Ltd., a metal processing facility on the same site, offers chemical treatment, anodizing, powder coating and other finishes. We provide complete turnkey production, from procurement of raw materials from approved suppliers through manufacture in a quality controlled environment, non-destructive testing and final treatments. We are dedicated to providing our customers with competitive, high quality, diverse manufacturing and metal processing capabilities. For more information, visit www.VectorIndustries.com. About Flow International Flow International Corporation (NASDAQ: FLOW) is the world’s leading developer and manufacturer of ultrahigh-pressure waterjet technology for cutting and cleaning. Flow provides state-of-the-art ultrahigh-pressure (UHP) technology to numerous industries including automotive, aerospace, job shop, stone interiors, surface preparation, food and dozens more. For more information, visit www.FlowWaterjet.com.
Because of FlowNest’s ability to array and tightly nest parts, they have significantly less wasted material. “Our Flow waterjet allows us to turn product around in a short period of time with no need for special tooling,” explains Morin. “We are far more productive, our material usage is optimized, and our turnaround time is much shorter. That makes our customers very happy.” The Right Choice Their primary business is in the aerospace industry, but they also do fabricating and precision machine shop work for other businesses in the need of high quality parts with a fast turnaround. “We are a complete turnkey facility, from raw material procurement through the manufacture, testing and final
Waterjet cut part and finished engine Nacelle seal A2Z METALWORKER
• 17 • April/May 2011
terms of the PPA, Tioga finances, builds and operates distributed solar electric projects for 15 to 20 years, selling the electricity generated to its customers at low, predictable rates. The online PPA, which was developed in conjunction with Tioga Energy’s top-tier institutional financing partners, is also complemented by detailed annotations to explain in common terminology the complexities of the legal document. Costs associated with PPA negotiations typically account for approximately 25 to 50 percent of the overall transactional costs of commercial-scale solar PPA projects. Customers – particularly those in the public sector – can spend significant amounts of time and capital attempting to adapt standard construction contracts into PPA documents. After issuing competitive solicitations around these altered contracts, additional resources are then required to redraft the document and finally arrive at a financeable PPA contract.
SBA Chief Discusses Initiatives To Aid Small Companies
Tioga Energy Places Solar PPA in Public Domain Tioga Energy, a leading provider of renewable energy services to commercial, government and non-profit institutions, recently announced that its SurePathSM Solar power purchase agreement (PPA) is now available to the public through its company website. The contract can be viewed with explanatory annotations online and downloaded in editable form by any interested party, free of charge.
“The economics of solar must be improved in order to sustain industry growth and ultimately contribute a significant portion of power to our grid,” said Paul Detering, CEO of Tioga Energy. “PPAs are a driving force behind the expansion of the commercial, institutional and industrial solar electric markets in the United States, and there are significant cost savings to be had by reducing the resources required to negotiate these contracts. Our ‘open source’ PPA is the first step in realizing those savings, providing greater transparency and helping customers to understand this document. We encourage viewers to provide feedback on how we can further improve our PPA and look forward to establishing a dialogue with the larger community.” Tioga’s SurePathSM Solar power purchase agreement helps organizations to cost-effectively realize the benefits of clean, on-site solar power generation without the high upfront capital costs. Under the A2Z METALWORKER
•
18 • April/May 2011
Under the headline “Getting Money Into The Hands Of Small Businesses,” the Wall Street Journal reports an interview with Karen Mills, head of the Small Business Administration and a former venture capitalist. Under her tenure the agency has loaned out roughly $2 billion in stimulus funds, supported $40 billion more in loan guarantees, and taken a number of steps to encourage hiring and boost small companies’ ability to become successful exporters. “We decided to be very bold in getting money out into the hands of small business as quickly as possible. As a result, tens of thousands of businesses were able to get credit in a market where the banks had really frozen them out,” Mills said.
Apple Inc. receives top honors in Brand Excellence Awards Apple Inc. was named Grand Award winner in the American Brand Excellence Awards, a national study conducted by the Business Journals to evaluate brands that best serve small to midsize businesses.
Apple also received an award within the technology sector. Six other companies received Brand Excellence Awards in their categories, including Southwest Airlines in travel, UPS in business services, Visa in financial/insurance, Staples in retail and Verizon Wireless in telecommunications. The study looked at more than 250 business brands and ranked them based on criteria including “easy to do business with,” “behaves ethically,” “industry leader,” “forward-thinking,” “for growing companies,” “growing in popularity” and “has a good price for what you get.” More than 2,000 business owners and managers participated in the study.
MC MACHINERY SYSTEMS, INC. | EDM | LASER | WATERJET | PRESS BRAKE | CONSUMABLES | SERVICE | FINANCING
SPECS MATERIALS DEADLINES CHANGE
IT’S NICE TO HAVE SOMETHING YOU CAN COUNT ON With more experience and a wider range of technologies including Mitsubishi Laser, Waterjet and EDM, MC Machinery Systems delivers the most productive and profitable manufacturing solutions. Industry-leading support and the strength of a global brand mean we’re there to help you succeed – now and far into the future.
FREE Demo or Test Cut. Call 630-616-5920 or visit www.mitsubishi-world.com
A2Z METALWORKER
•
20 • April/May 2011
Alta Raises Funding to Improve the Production Economics of High Efficiency Solar Alta Devices Inc. announced it has raised funding to focus on improving the production economics of high efficiency solar PV (photovoltaic) applications. In addition to breakthroughs in advanced technology, the company is focused on manufacturing and form factor breakthroughs.
“There are a number of advanced materials that could demonstrate higher solar conversion efficiency than silicon,” said Christopher Norris, Alta’s CEO. “To date, the challenge of these materials is that they have been expensive to produce and difficult to implement.Therefore, they are not currently an economic solution for addressing the world’s energy needs. We are working to solve this problem by leveraging new approaches in several disciplines.” Norris explained that the company has been making good progress in the lab. “We have a team of technologists working on issues ranging from efficient use of raw materials, better manufacturing processes, and new ways to optimize the conversion efficiency of these materials for energy applications.”
P.O. Box 1603, Bellevue, WA 98009 Call: (425) 827-6931 Toll Free: (800) 254-0415 Fax: (425) 827-6938 www.dwmachinerysales.com
The Fabrication Machine Authority for the Pacific Northwest PRESS TECHNOLOGY
EVERYTHING LASER
HIGH PRECISION PLASMA CUTTING SYTEMS
PLASMA CUTTING & BURNING MACHINES
BENDING MACHINES
FINISHING & DEBURRING
HIGH PRECISION PRESS BRAKES & POWER SHEARS
DW Machinery Sales represents over thirty years of experience in the machine tool industry. AMTDA Professional, CMTSE. Member of FMA
• 2 & 3D Laser Machines • Plasma • Turret Punches • Saws • Ironworkers • Bending Machines • Shears • Press Brakes • Presses • Finishing & Deburring Machine Solutions
www.dwmachinerysales.com
For example, “One of the technologies on which Alta is seeing good results is a process called ’epitaxial lift off’,” according to Kleiner Perkins Caufield and Byers partner and Alta board member Bill Joy. “This is a technique that will enable efficient use of very thin layers of gallium arsenide for solar PV applications. Based on our review of the state-of-the-art, Alta has the world’s leading experts in this area.” Total investment in this round to date is $72 million. The new funds are being used to continue moving toward commercialization.
Fairchild Semiconductor Returns To Silicon Valley Bloomberg News reports, “Fairchild Semiconductor International Inc. (FCS), one of the chip industry’s founding companies, moved its corporate headquarters back to Silicon Valley to draw from a deeper well of technology executives.”The company had been headquartered in Maine. “Fairchild chose to shift its headquarters across the country to take advantage of the concentration of experienced and talented
industry executives, Chief Executive Officer Mark Thompson said. The chipmaker also wants to place its leadership closer to customers and operations in Asia.”
Boeing Receives Notable Orders From Chinese Airlines The Wall Street Journal reports Boeing’s 747-8 Intercontinental program got a boost with an order of five planes from Air China, noting that the only two other airlines have ordered the plane. According to the article, HNA Group also ordered 38 more planes, but these were 77s and 30 of the 787-9, which it called a stretched version of the Dreamliner. Bloomberg News notes these orders “underscore the importance to Boeing and Airbus SAS of China, where passenger numbers will likely jump 69 percent by 2015, according to the nation’s industry regulator”. A2Z METALWORKER
• 21 • April / May 2011
would in turn mean higher sales for other companies. After four months of gains, the NFIB optimism index slipped slightly in December, but the trend remains positive. The percentage of firms expecting more sales rose to the highest level in more than three years.This is worth celebrating because lack of sales growth has been the No. 1 problem for small businesses. Read more about the NFIB index. There’s also evidence that these companies are beginning to invest for the future again. The number of firms in the NFIB survey who said they planned to hire more workers rose in December to the highest level in more than two years. In December, employment in small firms (fewer than 50 employees) rose by 117,000, the biggest gain in nearly five years, according to the ADP employment report. For confirmation, the Intuit small business employment index (which covers even smaller companies with fewer than 20 employees) has increased for 15 months in a row. The average employee at one of these companies is working nearly three hours more per month than she was during the worst of the recession. Demand is rising, but sales are still weak, business owners say. The small-business sector has other problems, of course.
STEM grants help attract more students to sciences Small Businesses May Be Growing It’s no wonder the recovery has been so anemic: The U.S. economy has been trying to run on one leg. Large businesses—the good leg— have been growing robustly for at least a year. Production is rising, sales are higher and profits are through the roof. But the recovery missed the second leg—small businesses, which account for about half of U.S. output and jobs. Encouragingly, there are now tentative signs that the second leg may finally be healing. Since the recession ended in mid-2009, we’ve been relying almost exclusively on larger businesses for our growth.The problem is, large businesses have been relentlessly cutting costs, especially labor costs, to improve their bottom line. Profits are up, but employment is flat. One way to measure this divergent economy is to look at two sets of business surveys. The Institute for Supply Management’s business surveys primarily cover middle- and large-sized companies, while the small business optimism index of the National Federation of Independent Business covers smaller companies. The ISM index contracted sharply in the recession, but has recovered nicely, consistent with economic growth of about 5% per year. By contrast, the NFIB index has barely budged off its lows, suggesting that the small-business sector is holding the economy back. It may be one reason why the economy has grown at only a 3% pace, rather than the 5% indicated by the ISM. However, there are clues that small businesses are finally getting back on their feet. Small businesses are regaining confidence that their sales will improve, which would mean renewed hiring and investments, which A2Z METALWORKER
•
22 • April/May 2011
Some will do it with underwater robots. Others will use computers that make 3D images. Still others will design brand-new products or experiment with creative teaching techniques. Innovation. Creativity. Effectiveness.Those are some hallmarks of K-12 programs receiving a total of $2.4 million in grants from the nonprofit, privately funded Washington STEM, created to boost the quality of education in “STEM” subjects — an acronym for science, technology, engineering and math. The 15 grantsmake up the first set of allocations from the statewide group that hopes to raise $100 million in 10 years. Grants range from $5,718 to help struggling middle-school students in Neah Bay to $628,700 in services to help Bellevue School District develop STEM-focused curricula that could be adapted by schools across the state. Over the past year, Washington STEM has raised nearly $20 million, with Microsoft, Boeing, McKinstry and the Bill & Melinda Gates Foundation as major donors. The goal: to better prepare today’s students for today’s — and tomorrow’s — jobs, and to foster a spirit of innovation essential to advancements in science and technology. The need is immediate and critical, said Washington STEM vice-chair Brad Smith, Microsoft general counsel and senior vice president.
We reduce the friction between industry and nature.
Aerospace Approvals: • American Airlines • Boeing • Bombardier • Lockheed Martin • Lord Corporation • Pratt & Whitney • United Technologies • Rolls Royce Free of: • Boron • Chlorine • Diethanolamine • Formaldehyde • Sensitizers Local stock available for immediate delivery.
REACH
Compliant
Best People • Best Products • Best Value 800-433-LUBE • 856-468-0216 • www.hangsterfers.com
An ISO 9001:2008 Company A2Z METALWORKER
• 23 • April / May 2011
Why Calibrate/Certify Your Flowmeters? Why calibrate/certify your flowmeters? It is expensive for your company when compared to the certification cost of a static-calibration item such as a pressure gauge or OD micrometer. Also, many small companies have no spare flowmeters, so to calibrate means shutting down production lines. I could give many reasons why you should get flowmeters calibrated/certified such as: DCAS or FAA compliance, Prime-contractor requirements, or Medical/FDA regulations. Instead, this article will explain why money saved might be the best and simplest reason of all~ We will use an example a small jobshop performing shielded-welding gas operations which use Argon or Helium in the process. Most companys meter their welding gas using a brass rotameter flowmeter combined with a pressure regulator attached to the CGA580 fitting on the Argon tanks. These meters are inexpensive, costing around $175-$300 each and their accuracy is accordingly not very good without checking them against a flow standard. Calibration/certification of these Argon/Helium flowmeters at a Primary Standard Laboratory, such as NBS Calibrations, Inc. costs $200-$250 and typically takes 10 working days for turnaround time. Most owners or QC managers scream “How much?” when informed of this and we never hear from many of them again. This reminds me of an old adage in the flow business: Calibration of flowmeters is a messy business. Since flow calibration/certification is a dynamiccalibration process, combining certified gauging with a fluidic flow circuit, something may spill on the floor! The mess is trying to explain that such an expensive and time consuming cerA2Z METALWORKER
•
24 • April/May 2011
tification is actually more cost efficient than a company initially perceives. Going back to the example of a welding process shop consuming Argon as a shield gas: At approximately $80/tank of Argon using 16 tanks per month (or 192 tanks/year). Argon is costing your company $15,400/year. This business uses 2 of the combination Brass-body regulator/flowmeters to meter the flow of Argon. My experience with these meters over the years shows they are typically in error +/- 15% of indicated flowrate. For the sake of our example we assume ther meters are reading “low” showing 40 SCFH when the real/ calibrated flowrate is 46 SCFH (40 x 1.15 or 15%). This loss sounds small, but let’s look at the math and savings: If using your certified flowmeters to correctly meter the gas, 15% savings on $15,00/ year comes to $2300 saved in Argon each year. Subtracting two flowmeters (calibrated at $225 each per year) is $450, subtracted from $2300 in gas costs, this leaves $1850 in savings by using calibrated/certified flowmeters! This is a significant amount in these lean times. At first glance it might seem a costly and production stopping endeavor to certify your flowmeters, but in reality it will save you money. Even considering the low cost of purchasing a “spare” flowmeter to rotate-out and keep your process going, this makes sense for even the smallest welding or process shops. Contact NBS Calibrations Inc. for more information at 480-894-0592.
Boeing Bid Beats Europe for Tanker The Pentagon awarded Boeing Co. a contract worth more than $30 billion for aerial refueling tankers, closing a chapter in a tortured bidding contest, but potentially launching a fresh transAtlantic political controversy.
The award preserves Boeing’s decadeslong position as supplier of refueling aircraft to the Air Force, and shores up its standing as a U.S. national champion. The Pentagon’s move is also likely to feed perceptions in European capitals that the U.S. defense market—the biggest in the world—remains largely closed to European defense suppliers. The losing bidder was EADS North America, a unit of European Aeronautic Defence & Space Co. Past efforts by the Air Force to replace its tankers have been upended by scandal, and industry observers said a protest could stall delivery of the aircraft. Ahead of the announcement, the governors of Alabama, Mississippi and Louisiana sent a letter to President Barack Obama in support of the bid by EADS, which proposed building its tanker at a new facility in Mobile, Ala. The Defense Department said the first phase of the deal, worth $3.5 billion, calls for delivery of 18 aircraft by 2017. Overall, the contract is worth more than $30 billion, according to Air Force Secretary Michael Donley. Thousands of U.S. manufacturing jobs are at stake. Boeing proposed to build its tanker at existing facilities in Washington and Kansas, and said the program would support around 50,000 total U.S. jobs and hundreds of suppliers around the country. EADS said its tanker would keep 48,000 Americans employed, and bring jobs to the depressed Gulf Coast region. The KC-X refueling tanker is an effort to replace the Air Force’s aging fleet of KC-135 tankers, which began flying under President Dwight Eisenhower. But the KC-X came to symbolize a highly politicized military procurement process. Previous efforts to pick a winner collapsed amid protests and procurement scandals. This latest award marks the Air Force’s third major attempt to replace its tanker fleet.
A2Z METALWORKER
• 25 • April/May 2011
NBS
Calibrations, Inc.
NIST Traceable Flowmeter Calibration
Saves you GAS, Money & Assures More Accurate Product Testing.
LABORATORY CAPABILITIES: .001-60 GPM LIQUID (@ 50-125 PSIG) .001-80 SCFM GAS (@10-250 PSIA) • Turbine Flow Meter Calibration • Rotameter/GAS Calibration • Flowmetering Systems • Coriolis Micro® Motion • METCO® Plasma Spray Meters
TEMPE, AZ 85281
480.894.0592 www.nbscals.com NBS Calibrations, Inc. is fully NIST Traceable, compliant with Mil-Std 45662A, ANSI/NCSL Z540-1, ISO 10012 and ISO 17025. NBS Calibrations, Inc. is not a government agency and is not affiliated with the former National Bureau of Standards /NIST.
Mini-Weapons Add Punch To Small UAVs A new generation of highly accurate mini-weapons is being developed for small, unmanned aerial vehicles (UAVs) for use against personnel and light vehicles. One factor in development is the need to weaponize small UAVs such as the RQ-7 Shadow from AAI Corp., in use by the U.S. Army and Marine Corps, which cannot carry a 100-lb. Hellfire missile.
Raytheon’s latest offering in this area is the Small Tactical Munition (STM), a 13-lb. glide bomb with GPS and semi-active laser guidance that can hit fixed and moving targets in all weather. Development has been completed in an approach that Don Newman, program director for advanced weapons at Raytheon, calls “Lamott”—lay a missile on the table. “We build a missile with company money, then demonstrate it to people who might be interested,” he says. The gamble is worthwhile because of the potential market—the U.S. Army and Marine Corps are interested in arming their Shadow UAVs with the weapon. Raytheon successfully tested the STM against targets. Newman says it is not a prototype but a producible weapon, and the company can take immediate orders. Being small does not mean the STM is cheap. “When you have a • 72 • March/April 2011 26 • April/May 2011
A2Z METALWORKER A2Z METALWORKER •
precision weapon with GPS and seeker, most of the cost is in the nose,” says Newman. “You’ve got the same precision as a larger weapon, just in a smaller package.” Mass production would bring costs down, and the STM could also increase the weapon load of the larger RQ-1 Predator and MQ-9 Reaper UAVs, both from General Atomics. “You could replace one Hellfire missile with 6-8 STMs,” Newman says. Lockheed Martin is working on a small missile for the Army’s Extended Area Protection and Survivability (EAPS) program. This will be a mobile counter-rocket, artillery and mortar system with a range of at least 2.5 km (1.5 mi.). The EAPS defense will be radar-guided, with two interception options under consideration: a 50-mm projectile and the missile being developed by Lockheed Martin, which is 2 ft. long, 1.5-in. in diameter and weighs 5 lb. “We are pushing the limits with this,” says EAPS Product Manager Chris Murphy, who is not aware of smaller guided missiles. Miniaturizing the components was a challenge Murphy compares to the technology used to downsize mobile phones and medical imaging devices. “The key is in the electronics and the receiver,” he says. “These are not off-the-shelf components.” The missile will be a kinetic interceptor with semi-active radar guidance. Development has progressed well. Successful hardwarein-the-loop tests will be followed by flight tests this summer. In 2012 the missile will be tested against targets. At that point, says Murphy, the aim is to have something that is “nearly tactical.” Lockheed Martin and the Army see other applications for the missile, including small UAVs. “There’s an option for a semi-active laser seeker,” says Murphy, with active millimeter-wave guidance as a possibility. With an explosive warhead it could engage ground targets as well as enemy UAVs. Other platforms might include fixed-wing aircraft and helicopters, where it would be a self-defense or offensive weapon. It might even become an infantry weapon, weighing a fifth as much as the FGM-148 Javelin guided antiarmor missile, made by Lockheed Martin and Raytheon. Textron Defense Systems is one of three companies (the others are Aerovironment and IAT) competing for the U.S. Air Force’s Lethal Miniature Aerial Munition System (Lmams) contract. Lmams will be a 3-lb. weapon that a dismounted soldier can launch from behind cover to seek and identify distant targets via a video link and destroy them. Textron’s entry is the Tactical Remote Aerial Munition (TRAM). Its advantages include a 1-hr. loiter time, twice what is required, and an advanced warhead. Software permits the operator to lock TRAM on to a maneuvering target. The Air Force contract calls for three weapons from each manufacturer to be delivered in April for target tests. An order for the winning design should follow soon after.
www.sharpcnc.com info@sharpcnc.com tel: 310.370.5990
www.sharpcnc.com info@sharpcnc.com tel: 310.370.5990
A2Z METALWORKER
• 27 • April / May 2011
n
BMSC, LLC
Business Management Systems Consulting
Prepare for ISO 9001/ AS9100 Certification For Only $3500! $3500!
.
,
r
!
”
:
Contact Bretta Kelly Today! 602.445.9400 www.businessmsc.com
“When Bretta told me that ISO shouldn’t be treated as “Rocket Science” I started listening. She was able to back it up with explanations we could understand. The difference we found with Bretta over other consultants we have talked to is that she herself has gone through the pain of ISO internally when working in quality departments. She is the President of her own company and is a certified auditor.”
George G. Crouch, Advotech Company
.. Why cAlways Available Jet Being Processing is now Is Killing ng i n u no Business Your Premier Precision Group An
- Special Processing -
JohannWolfgang von Goeth, the famous writer and scientist, was quoted Chemical as once saying, “We must always change, renew, Processing rejuvenate ourselves; Anodize otherwise, we harden.” His philosophy couldn’t be more true, and Conversion Coating important, when it comes to running a business. Passivation
Painting Dry Film lubricants You know it as part of business 101—always be there for the customer. Teflon Coating
You are supposed to always be at their disposal, immediately providing Non-Destructive Testing your service to them. In other words, the world of business has taught Liquid Penetrant you that you should sacrifice everything for the customer. But should Magnetic Particle Pressure Test you really? Impregnation
The problem with always being there is that actions do speak louder than words. In short, your exceptional availability doesn’t become an amazing “wow” feature to your customer—instead it becomes an Lab Services expectation. Think about a local store that stays open late or 24 hours, Corrosion Resistance and you can see how that “wow” factor dissipates.
Taber Abrasion Resistance Coating Weight Coefficient of Friction At first, you were kind of excited that it stayed open late or all night, Solution Analysis Premier and you appreciated it.You liked the idea that theyPrecison were thereGroup whenever Millipore Inspection 2660 W. Quail Ave, Phoenix, AZ 85027
you needed something during those hours, even if you didn’t think you Assembly 623.869.6749 needed it much. After some time went by,623.780.8830 you came to(fax) expect they sales@premierprecision.com would be open. And if you had run out at 1:00 a.m. to grab some antacid, you would have been really tickedwww.premierprecision.com off if their doors were locked.
A2Z METALWORKER
•
28 • April/May 2011
A2Z METALWORKER
• 53 • Sept/Oct 2010
That’s what happens when we make ourselves always available.Within a short period of doing so, when you are not answering the phone on Sunday night, all of a sudden your customer is annoyed and feels you let them down.They came to expect that you would be there at every turn and at all times. The key to business success is not becoming a slave to the work. Rather, it is taking the time to refresh and recharge.You must take a break, and by doing that, you will end up providing a much greater service to your clients. Here is how you get started. •Tell your clients you will be on vacation for the next three days (even if you are just going to be sitting at home—after all, taking a break from the constant work is a vacation). •During this time, turn off the phone and don’t respond to e-mail. Although you may be whining about this step now, just trust me on this. Do nothing related to work; just detach. •Spend those three days doing something else—anything that doesn’t have to do with your business. Spend it with your family, play a round of golf, hit the beach or just clean the garage. But don’t sit and think about work! •Repeat this process at least every couple of months. The first time you decide to unplug from your business and unwind, it will be weird. And although you might think that your business is going to fall apart and that you simply can’t make it through the three days without at least checking your e-mail, you will find that you make it through just fine. By the next time you do it, you will have the hang of it and feel more comfortable. But along the way, something else happens as well. Your spirit and love for your business will be renewed. And when you get back to work, to your clients you will have an energy for your business and for them that you haven’t felt in a long time. And that is a good thing. Don’t become hardened to your business and the service you offer. Do as Goethe recommended centuries ago and rejuvenate! By Mike Michalowicz
UAE Armed Forces to Receive Oshkosh Global HET Al Jaber Group has selected Oshkosh Defense to provide the global heavy equipment transporter (HET) vehicle to support United Arab Emirates (UAE) armed forces. Oshkosh and Al Jaber Group jointly designed a new global HET to meet the requirements of the UAE armed forces, which was rigorously tested and evaluated in extreme desert conditions. The new Global HET is a high-performance, 6×6 transport vehicle with a 70t payload capability and is capable of transporting a main battle tank, armoured vehicles, construction and other equipment. The vehicle will help the UAE military reduce the wear on equipment and crew fatigue that occurs when travelling long distances.
Effectively Reducing Cycle Times in Aqueous Cleaning Processes Jeffrey J. Beard, Petroferm Inc., Gurnee, Illinois Silvio J. Pioli, Baron-Blakeslee SFC Inc., Northbrook, Illinois
The
use of aqueous cleaning processes has continued to grow as manufacturers seek alternatives to solvent based cleaners which can be toxic, detrimental to the ozone layer, high in both volatile organic compounds (VOCs) and global warming potential (GWP). When choosing an aqueous cleaning process, several parameters should be considered including: type of cleaning fluid, concentration, temperature, agitation and cycle time. Of these parameters, cycle time has the greatest impact on the overall cost of the cleaning process.
This paper will focus on a specific method to reduce the cycle time required to remove soils in aqueous cleaning thereby lowering the overall cost of cleaning. Test Preparation Steel test coupons were coated in a controlled, uniform process with various cutting fluids and lubricants.The same oils were also applied into blind threaded holes on motor end-bell cases. A series of test were performed to determine the cleaning times with and without solution agitation. Cleanliness was determined using water break test, Q-tip and magnified visual observation. Cleaning Product under Evaluation An aerospace approved aqueous alkaline cleaner diluted at 20% volume was heated to 140ºF in a soak cleaning tank. This cleaner was selected because of its non-foaming behavior and exceptional materials compatibility on a broad range of metals and composite. Results Overall, the use of eductor solution agitation versus a stagnant dwell in the aqueous cleaner wash tank was very beneficial. Using an agitation rate equivalent to 50x turnover/hr reduced the required time to remove the surface contamination by about 33%, from 15 minutes to 10. In the case of blind holes, with directed eductor solution agitation the reduction in dwell time necessary to remove soil was found to be up to 50% less. Discussion The objective of this evaluation was to determine the effects of solution agitation on reducing cleaning cycle times. It was found that with 50x turnover/hr solution agitation that the cleaning cycle time can in fact be reduced by 33-50%, resulting in improved production capability and considerable cost savings.
About the Authors Jeff Beard has served the specialty chemical business for 23 years. During that time, he has worked extensively with aerospace, automotive, electronics and medical customers worldwide to assist them replacing hazardous chemicals used in their cleaning processes or to improve their existing cleaning processes. For more information on CleanSafeTM 787C or any other cleaning product offered by Petroferm Inc. please call 317-371-8899 or visit www.petroferm.com. Silvio Pioli has over forty years experience in various technical, engineering, and senior management positions within the metal finishing industry. To learn more about eductor solution agitation systems, as well as the complete range of Baron-Blakeslee Aqueous, Semi-Aqueous, Solvent, and Co-Solvent Cleaning Equipment, please call 847-509-2910 or visit www. baronblakeslee.com A2Z METALWORKER
• 29 • April / May 2011
A Recap of AeroDef Manufacturing With Some of Our Customers
AeroDef Sessions to Show How OEMs, Suppliers Are Creating an Aerospace and Defense Manufacturing ‘Digital Thread’ Anaheim – March 9, 2011 — The concept of a digital thread – several supply chain partners with different skill sets, systems and processes, working together with OEMs to integrate aerospace and defense manufacturing to a greater degree than has ever been accomplished in the past –was the focus of more than 15 sessions at the AeroDef Manufacturing Exposition and Conference, April 5-7, in Anaheim, Calif. “Accomplishing a ‘Digital Thread’ requires the manufacturing technologists to come on board at the same time the engineering designers are considering the configuration,” Paul Oldroyd, technical fellow, Bell Helicopter, and a member of the AeroDef Executive Committee, explains. “It’s a different development model for the industry, but one of the most important. It’s the future of where aerospace manufacturing technology’s going.” Here were some of the speakers and their topics:
A2Z METALWORKER
•
30 • April/May 2011
1) Tom Burbage of Lockheed Martin Aeronautics Company explains the digital thread. 2) Mike Vander Wel discusses the importance of AeroDef to the Boeing Company. 3) David Wickwire of the Lockheed Martin Corporation on finding new solutions for A&D customers.
A2Z METALWORKER
• 31 • April / May 2011
Metalworker FREE A2Z
SUBSCRIPTION
Metalworker
To_receive_your_free_subscription__fill_out_the_following,__
Mail_Or_Subscribe_On-line A2Z METALWORKER PO Box 93295 • Phoenix, AZ 85070 www.azmetalworker.com
Name__________________________________________________ Company_______________________________________________
Address_________________________________Suite_#__________ City_________________________ State_______Zip_____________ Phone_______________________
E-mail______________________________________
Still Time New to Sign Up For National For more information, contact Rosanne Brunello,President/Mountain Air Force and flown to Edwards Air Column: Strategies Needed To Land Desirable Aerospace Week Event Rep, http://www.nationalaerospaceweek.org/events, rosanne@mtnrep. Force Base in California to be used Jobs com, 480 899-1900. for developmental flight testing. The
I’m proud to say that Raytheon and Goodrich called to become sponsors aircraft’s initial flight preceded first Missilecareer Shield at $10forBillion Sets of ourSchawbel event!!!!!!! I hope you“Personal are goingBranding” to be involved Dan writes in the blog too. at Forbes (3/22) that “traditional flights two F-35s, both Up of them strategies are becoming ineffective,” and in order to be successful the job seeker must learn Boeing-Lockheed F-35C Navy carrier versions, that Our mission“your is topassion, bring together thenetwork, Americanexperience Aerospace with Industry, to leverage creativity, emerging technologies, and were among the 13 flight test plans from ability the oldto timers whofree designed it, toopportunities.” the children that will take an Boeing Co. will compete fororiginally the first time to keep its U.S. missile defense your balance and paid budgeted. interest in it. work as Lockheed Martin Corp. seeks to wrest away an order for as as $10 billion. Schawbel then offers “five ways to break through the clutter and land much your dream job.” The event in Phoenix includes a public awareness mission to all students US Army to Purchase Among them are demonstrating one’s knowledge and enthusiasm for a particular company, and adults, with regards to the Aviation and the Aerospace Industry. The Pentagon’s Missile Defense Agency is preparing to take bids on a becoming “an early adopter of innovative technologies,” making effective use of networking Abrams Vehicle from Students will be competing for the Title of America’s Paper Plane Pilot contract that Boeing has held since 1998 to design, build and operate opportunities, and being “willing to work for free” in order to transition to a paid position. 2010 in the Young America Aerospace Challenge. GD the arsenal of satellites, radar and high- speed interceptors intended to shoot down enemy intercontinental ballistic missiles in space. The new Next weproduction will have Aerospacemodel Industry Recognition Awards. These F-35 a success on first flight order will be for management and maintenance. General Dynamics Land Systems has Nominees will be recognized and awarded at the “Meet, Greet & be been awarded a firm-fixed-price conRecognized” Dinneraccomplished & Award Ceremony Evening. Loc kheed Martin anotherThursday milestone on the F-35 joint strikeThe fighter program contest gives the companies a shot a decade-long as the tract for the atpurchase of up toprogram 21 Abrams last month with the first flight of the first production model airplane. Pentagon reins in spending M1A2 increases. Riding on the outcome is Boeing’s system enhancement package verThe 11th Annual Mountain Rep “Hit & Giggle” Golf Tournament will future as a so-called systems integrator directing projects through sion two (M1A2 SEP V2) upgrade tanks. tee off Friday the 17th of September at 9:00, with tournament winners suppliers, saidverPhilip Finnegan, an analyst at consultant Teal Group in The aircraft numberluncheon. AF-6, an F-35A conventional takeoff-and-landing beingone-hour awarded flight at the of closing ceremony Fairfax, Virginia. sion, from Naval Air Station Fort Worth Joint Reserve Base went smoothly, the company said. M1A2 SEP V2 is a technologically The two day event will also include an Industry Trade show where advanced digital tank that features imBid requests may be issued by the Pentagon as soon as next month, table/booth will be sold or takeoff given totothe event sponsors, and a completed “The aircraft space was rock-solid from landing, and successfully all the tests proved displays, sights, auxiliary power allowing the companies to submit their proposals ahead of a decision Hole-In-One contest will be the grounds of theBill SanGigliotti. we put it through during thetaking flight,”place saidon Lockheed test pilot and a tank-infantry phone. next year. The rivals showed off their technology and announced new Marcos Golf Resort in Chandler, AZ. The money raised through the partners last week in Huntsville, Alabama, at the U.S. Army’s annual contest be used to purchase of playground to in capability, “The Airwill Force is getting a greata piece jet that represents equipment a huge leap and we’re The vehicle is capable of accommodatSpace & Missile Defense Conference. be donated to a school/park the the name of the winning looking forward to getting itininto hands of student the service pilotsthein just a few more weeks.” ing future technology improvements to aerospace competition. ensure compatibility with theasUS Boeing’s current missile-defense contract is worth as much $18Army billion The plane make additional test flights in Fortprice Worth before it is turned theending infuture systems. The cost forwill participating in the event is an all inclusive of $100.00 for theover 10 to years 2011,combat Jim Schlueter, a spokesman for the Trade show tables are available for $500 and sponsorship fees are $5,000. Chicago-based company, said recently. A2Z METALWORKER
•
32 • April/May 2011
A2Z METALWORKER
• 37 • Sept/Oct 2010
PlateAdLA
7/19/10
2:50 PM
Page 1
WATER-JET CUTTING Providing...Tighter Tolerances / Minimal Machining Table Capacity of 120” Wide x 360” Long Up to 6” Thick Cutting Capacity
HIGH DEFINITION PLASMA BURNING
CONVENTIONAL PLASMA BURNING
Up to 5/8” thk Stainless & 1 1/4” thk Carbon Table Capacity of 120” Wide x 390” Long
Up to 6” Thickness Table Capacity of 132” Wide x 564” Long
Available Products...
STAINLESS: 304H, 304L, 316L, 317L, 321, 347, 904L, 2205, 2507, 254-SMO, LDX 2101 CARBON: A35, W44, 514, 516-70, 572-50, 588, API-2H-G50 ALUMINUM: 5086, 5454, 6061, 7075, 7050, 2024
Range of Sizes... THK: 3/16” to 6” WIDTH: 48” to 120” LENGTHS: 96” to 528”
Value Added Services...
LASER CUTTING, POLISHING, GRINDING, HEAT TREATING, SAW CUTTING, FORMING, ROLLING, SHEARING, BEVELING
1-888-726-6385
samuelplate@samuel.com
www.samuel.com A2Z METALWORKER
• 33 • April / May 2011
A2Z METALWORKER
•
34 • April/May 2011
A2Z METALWORKER
• 35 • April/May 2011
www.teamindustrialservices.com (602) 269-7868 • (888) 700-7868 2514 N 33rd Ave • Phoenix, AZ 85009 ISO 9001:2000 Certified AS9100 Certified
expected to gain in strategic importance; Asia Pacific markets are expected to account for more than half of the market growth in 2011 with China and India leading the region; The Americas, Canada, Brazil and Mexico are expected to see significant growth in 2011; Near term growth in Asia Pacific and the Americas is expected to outpace Europe; amd
NDT and Inspection Services
Installation levels in Europe are expected to witness positive growth, with the slow-down in mature Southern European markets offset by continued high activity levels in the emerging markets of Southern and Eastern Europe. With few offshore projects to reach completion in Europe in 2011, European offshore installations are expected to reach 2010 levels.
Specialized Heat Treat Services
U.S. pursues export control reform despite unrest
• Radiographic Inspection (XRAY) • Liquid Penetrant • Pressure Test (Hydrostatic) • Mag Particle • Stress Relieving • Annealing • Induction
In-House or Onsite Inspection & Heat Treating Services. Typical Turnaround 24 Hours or Less!
Global wind market to resume growth in 2011 A new report predicts that the global wind turbine market will expand in 2011, with an estimated growth of 18%, after the global growth in new grid connected wind capacity slowed in 2010.
Around 34 GW of wind generated power came online in 2010, 3.5% more than 2009, however not all wind markets fared equally well. Nearly half of global installations in 2010 were in China and India, eclipsing the growth rates seen in the North American and European markets. Steen Broust Nielson, Director at MAKE Consulting says: “Some markets - particularly the US - finally showed in 2010 the full damage brought on by the global recession. But drops in some markets were balanced by growth jumps in other markets. Global growth is set to resume in 2011, but the global wind market is seeing shifts in demand, and strategic positioning in the market to capture growth will be key for companies in the sector in coming years.” Key findings of ‘Market Outlook 2011’: Based on 2010 installations MAKE predicts the global wind market to grow with a CAGR of 11% in the period 2011-2016 with China is expected to lead this market growth; Emerging markets, as well as offshore wind power are A2Z METALWORKER
•
36 • April/May 2011
The Obama administration is continuing its drive to speed export reviews of weapons and high-tech gear despite unrest across the Middle East and should have proposals ready this summer, U.S. defense officials say. Pentagon acquisition chief Ashton Carter underscored the need for reform, saying the current system was so cumbersome it actually drove some nations to buy equipment from other countries. He said the Obama administration was not only willing, but determined to change the system to better protect fewer items, while loosening restrictions on other items that are already widely available on the global market. Escalating protests in the Middle East and North Africa have sparked questions about the wisdom of loosening U.S. export restrictions at a time when Egypt and Tunisia have already seen leaders overthrown. Critics worry that U.S. weapons could fall into the hands of Islamistcontrolled governments that are hostile to the United States or Israel, the closest U.S. ally in the region. Defense officials say they are keeping a close eye on any pending arms sales but the administration is proceeding on a “case by case” basis rather than imposing a blanket moratorium on weapons sales to the Middle East. Carter said exports were an important driver of the U.S. economy but also helped build the military capabilities of U.S. allies, allowing them to assume more responsibility for their own security. Pentagon spokesman Bryan Whitman said export reforms were driven in part by concerns raised by some of the United States’ closest allies, like Britain and Australia, who complain that current laws hamper their ability to work as closely with the U.S. military as both sides would like.
MEET THE FAMILY. Introducing the Mach Series Waterjet Systems from Flow.
From 36,000 psi to 94,000 psi, from 11 hp to 500 hp, from 2’ x 4’ to 20’ x 100’... We have a waterjet to fit your needs AND your budget.
GET ACQUAINTED WITH THE ULTIMATE WATERJET SERIES — CALL 800.446.3569
www.flowcorp.com
A2Z METALWORKER
• 37 • April / May 2011
Card Gallery Registration PO Box 93295 Phoenix, AZ 85070
Northern CA, OR and WA Edition
Select your Payment method from the options below: I'm enclosing my calling card for 1 year at $135 PER HALF YEAR (6 issues), to be billed bi-annually._____ I'm enclosing my calling card for 1 year at $260 PER YEAR (6 issues), to be billed annually._____
NOTE: Agreement is for one full year, after which your card will be renewed on a per-issue basis, subject to your cancellation, which becomes effective immediately. In addition to my card, list my company under the following 6 categories in the Buyers Guide
1.____________________________2.______________________________3.____________________________ 4.____________________________5.______________________________6.____________________________
Company Signed EMEAIL:
EMAIL: Kim Carpenter at: Kim@AZMetalworker.com
Haas Automation to Host HaasTec Open House at So. Berkshire’s NetJets to to lead a turnaround in 2009, fired staff and wrote down plane values. Cal Facility in March Buy up to 120 BombarFor the first time in more than 7 years, Haas Automation, – America’s leading machine tool “NetJets Inc. is probably positioning themselves dier Planes builder – will host an open house at its headquarters manufacturing in Oxnard, CA. forand a pickup in demandfacility next year,” said Julius Yeo, a Singapore-based aerospace consultant NetJets Inc., the business-jet operator HaasTec, scheduled for March 10 through 12, 2011, from 10 am 4 pm daily, include machine at Frost & to Sullivan Inc.will “The business-jet owned by Warren Buffett’s Berkshire Hademos, factory tours, a catered lunch, and more. market in the U.S. still hasn’t really picked thaway Inc. said it placed a record order for up yet.” as many as 120 Bombardier Inc. (BBD/B) Visitors will seeofthea latest Haas in CNC technology up close and in great detail, with 20 planes toinHaasTec anticipation rebound machines cutting metal, including the new generation and DS turning centers, y-axis and TheSTfirm orders include 30 with of Montrealluxury travel. dual-spindle capabilities. There will be guided factory tours – both above and on the production based Bombardier’s Global 5000 Vision and floor – to see how Haas machines are built; and representatives fromXRS major tooling, workholding, Global Express Vision aircraft, which The agreement, worth more than $6.7 biland CAD/CAM manufacturers will be on hand to will sharebetheir insight and show their products. delivered starting next year. The deal lion at list prices, comprises 50 firm orders also includes 20 firm orders for Bombarand 70 options, according to a statement. Registration for HaasTec is free, and available onlinedier’s at www.HaasCNC.com/openday. new Global 7000 and GlobalGuests 8000 who jets, How much Columbus, Ohio-based NetJets register by February 1 are automatically entered to win an all-expenses paid trip to California which will be handed over starting in 2017. would pay for the aircraft, which will be to attend HaasTec, and guests who register by March 1 will receive a limited-edition Haas cap at delivered starting in the fourth quarter of the open house. “Although we anticipate 2011 to be another 2012, wasn’t disclosed. difficult year, when Bombardier begins to Obama Asks GE’s 125 Immelt Head Economic Advisory deliveries of these aircraft, we will be NetJets, which also ordered Embraer to make ready to satisfy the market’s demand,” Sokol Panel SA (ERJ) jets in October, said it expects said in the statement. the planes’ arrival to help meet increasing demand following whatnamed will probably be a General Electric Co.’s chief executive officer, to President Barack Obama Jeffrey Immelt, NetJets has a fleet of more thanChairman 800 business “difficult” 2011. The unit made a profit last replacing head his outside panel of economic advisers, former Federal Reserve Paul jets, including ones made by Dassault Aviayear after David Sokol, named by Buffett Volcker.
2 A A2Z Z METALWORKER METALWORKER
••
38 2011 48 •• April/May Jan/Feb 2011
NO W CR AC CA ED C LL IT EPT 60 CA IN 2-4 RD G 12 S -76 . 96
Announcing Immelt’s appointment to take tiontheSAhelm (AM), Textron Cessna Aircraft of the newlyInc.’s renamed President’s Co.Council and General Dynamics Co.’s Gulfstream on Jobs and Competitiveness, Aerospace Corp., according to athe stateObama said the economy is “in different ment. Thefrom company a fractionalplace” where itoperates was during the ecoownership model that lets customers nomic crisis, and new ideas are neededbuy to flight-hours across a fleet of jets. keep the momentum going.
The order from Bombar“The pastwas two NetJets’ years wasfirst about moving our dier, Hamzah Mazari, a New York-based economy back from the brink,” Obama analyst CreditImmelt Suisse AG, said in a note said with alongside in Schenectady, to clients. He has an “outperform” on New York, home to the birthplacerating of GE’s theenergy shares.business. “Our job now is putting
our economy into overdrive.” Buffett installed Sokol to run the unit, which theHebillionaire called “major called Immelt “oneBerkshire’s of the nation’s most problem” for 2009, after reductions respected and admired business leaders.”in corporate-travel spending amidmaker the global As head of the world’s biggest of jet recession damped demand for business-jet engines, medical-imaging equipment and flights. power-plant turbines, Immelt gives the White House a corporate heavyweight to NetJets made aObama’s $207 million pretaxcredenprofit help burnish pro-business in 2010, helped by a 7 percent increase in tials. Immelt, 54, GE’s CEO since 2001, is sales, compared with a loss of panel, $711 million an original member of the which a year to Berkshire’s 2010 wasearlier, formedaccording as the President’s Economic annual report. It posted an in aggregate Recovery Advisory Board Februarypretax 2009. loss of $157 million in the 11 years through 2009, according to the report. Immelt said while more than half of GE’s
C
K
P
W
M M In
M
H
CT
Buyer’s Guide & Card Gallery Equipment and Services
“Work with passion, sell with conviction, support with dedication.” • Brass & copper tubes
• Zinc coated wire
• Dielectric fluid
• Brass wire
• Metallics
• Resin
• Tooling
• Filters
• Graphite
• Spare & wear parts
• EDM hole driller
• Omax parts
At EPA, one call does it all. Call 1-800-EDM-2-WIN
MIKE ELDRIDGE
Lucian Cocos Tony Strocsher
S a l e s M a n a g e r, N o r t h W e s t
CORPORATE OFFICE
1400 Pioneer St. Brea, CA 92821 562•694•5990 562•694•6228: fax
1•800•336•2946 1•510•701•0738: c e l l email: mike@edmperformance.com www.edmperformance.com Offices:
California (So. & No.) • Florida • Ohio
Mark Montano
MARSHALL TOOL & SUPPLY
President
Western Machine Center, Inc. 19630 Hicks Road Los Gatos, California 95032 Office 408.955.1000 Cell 408.858.5791 Fax 408.955.1001 mark@westernmachinecenter.com www.westernmachinecenter.com
ACCESSORIES Cutting Tool Control____ 206-789-7277 Abrasive Systems KMT Waterjet Systems___ 800-826-9274 Aqueous Degreasers Petroferm Inc._______ 317-371-8899 Auto-Bar Feed Systems Western Machine Center___ 408-955-1000
Band Saws/Blades Marshall Tool _______ 206-244-8888 Magnetic Drills/Cutters Innovative Tool Sales___ 714-780-0730 Boring Bars Micro 100_________ 208-888-7310 Bridgeport Parts & Accs. Hallidie Machine Tool___ 253-939-9020 Carbide Tools CTE______________951-358-1111
Marshall Tool _______ 206-244-8888 Micro 100_________ 208-888-7310 Chemicals: Ultrasonic Petroferm Inc._______ 317-371-8899 Chucks Marshall Tool _______ 206-244-8888 Coating Treatment CTE______________951-358-1111 Coolant Systems Blaser___________ 801-722-4095 Cutting Tool Control____ 206-789-7277 Ebbco Inc_ ________ 800-809-3901 Hangsterfer’s_ ______ 800-433-LUBE DCM Tech _________ 800-533-5339 Cutting Fluids & Oils Blaser___________ 801-722-4095 Cutting Tool Control____ 206-789-7277
ERIC de LEEUW Sales Manager 4453 So. 134th Pl. Seattle, WA 98168 (206) 244-8888 Cell (206) 499-5307 Toll Free 1 (800) 327-8291 Fax (206) 244-8578
• Industrial Supplies • Metal Cutting Tools • Precision Tools eric@marshalltool.com www.marshalltool.com
Castrol___________ 800-894-7773 Hangsterfer’s_ ______ 800-433-LUBE Marshall Tool _______ 206-244-8888 Cutting Tools CTE______________951-358-1111 Innovative Tool Sales___ 714-780-0730 Magnetic Drills/Cutters Innovative Tool Sales___ 714-780-0730 Magnetic Drills/Cutters Innovative Tool Sales___ 714-780-0730 Magnetic Drills/Cutters Innovative Tool Sales___ 714-780-0730 Marshall Tool _______ 206-244-8888 Micro 100_________ 208-888-7310 US Shop Tools_______ 714-772-9011 Drills/Reamers CTE______________951-358-1111 Cutting Tool Control____ 206-789-7277 Marshall Tool _______ 206-244-8888 US Shop Tools_______ 714-772-9011 Dust Collectors, Filtration Equip. Blaser___________ 801-722-4095
DCM Tech _________ 800-533-5339 EDM Materials & Supplies Cutting Tool Control____ 206-789-7277 Blaser___________ 801-722-4095 EDM Network_ ______ 480-836-1782 Global EDM Supply____ 480-836-8330 EDM: Dielectric Systems /Filtration Ebbco Inc_ ________ 800-809-3901 End Mills CTE______________951-358-1111 Elrod Machine______928-526-9032 Marshall Tool _______ 206-244-8888 Micro 100_________ 208-888-7310 Filtration Equipment Cutting Tool Control____ 206-789-7277 Ebbco Inc_ ________ 800-809-3901 A2Z METALWORKER
• 39 • April / May 2011 • 39 • April / May 2011
A2Z METALWORKER
“Work with passion, sell with conviction, support with dedication.” • Brass & copper tubes
• Zinc coated wire
• Dielectric fluid
• Brass wire
• Metallics
• Resin
• Tooling
• Filters
• Graphite
• Spare & wear parts
• EDM hole driller
• Omax parts
At EPA, one call does it all. Call 1-800-EDM-2-WIN
MIKE ELDRIDGE S a l e s M a n a g e r, N o r t h W e s t
CORPORATE OFFICE
1400 Pioneer St. Brea, CA 92821 562•694•5990 562•694•6228: fax
www.kdcapital.com
1•800•336•2946 1•510•701•0738: c e l l email: mike@edmperformance.com www.edmperformance.com
922-1674
Offices:
California (So. & No.) • Florida • Ohio
P D
Mark Harris Machine Services Inc. PROVIDING
MANUFACTURING
SOL1JT7ONS
7808 184th ST SE Snohomish. WA 98296 mharrls@cncmachlneservlce.cam
www.cncmachlneservlce.com
www.
President Cell
(206) 999-3232
Ro
Office
(425) 788-4500
Tall Free
(866 J 788-4500
Fax
(360) 668-1049
--
Metal Cutting Forming DW Metal
Machinery Sales.com P.O. Box 1603 Bellevue, WA 98009-1603
phone: (425) 827-6931 (800) 254-0415 fax: (425) 827-6938
President
Certified Machine Tool Sales Engineer
4114 B Place NW Unit 105 Auburn, WA 98001 www.roscoprecisionmachinery.com
e-mail: rbherling@dwmachinerysales.com
Parts Washing Equipment Blaser___________ 801-722-4095 Rotary Tables Hogue Precision -------------209-892-5649 Saw Replacement Parts Rocky Mountain Saw Blades_303--761-3000 Solvents & Degreasing Agents Blaser___________ 801-722-4095 Hangsterfer’s_ _______ 800-433-LUBE A2Z METALWORKER
•
(800) 426-2052 (206) 683-4255 (206) 575-3397
(253) 333-2439 fax (253) 804-3160 cell (206) 818-6813
Petroferm Inc._______ 317-371-8899 Solvents: Vapor degreasing Petroferm Inc._______ 317-371-8899 Solvents:Hand Wipe Petroferm Inc._______ 317-371-8899 Solvents: Mil PRF 680 Petroferm Inc._______ 317-371-8899 Spindles Setco-Pope Spindles____ 866-362-0699 Thread Mills Micro 100_________ 208-888-7310 Tool Repair CTE______________951-358-1111 Tooling Systems Hogue Precision______209-892-5649 Micro 100_________ 208-888-7310 US Shop Tools_______ 714-772-9011 Waterjet Accessories KMT Waterjet Systems___ 800-826-9274 Workholding Innovative Tool Sales___ 714-780-0730 CALIBRATION SERVICES Cutting Tool Control_____206-789-7277 NBS Calibrations_______480-894-0592 GRINDING Grinding Filtration Ebbco Inc_ ________ 800--809-3901
40 • April/May 2011
J~;;::) Washington
Ian M. Ouarders Sales Manager
Hans Barnes
Bob Herling
FormTools CTE______________951-358-1111 Gaging Cutting Tool Control____ 206-789-7277 Inserts Marshall Tool _______ 206-244-8888 Jaws US Shop Tools_______ 714-772-9011 Lubricants / Systems Blaser___________ 801-722-4095 Cutting Tool Control____ 206-789-7277 Hangsterfer’s_ ______ 800-433-LUBE Machine Tool Cool. Filtration Blaser___________ 801-722-4095 Hangsterfer’s_ ______ 800-433-LUBE
Mazak
..:=
,
'. ,.I
Grinding Machines Clark Machinery_ ____206-219-2528 CNC Machine Services_ 425-788-4500 Hallidie Machine Tool__ 253-939-9020 Hogue Precision______209-892-5649 Machine Toolworks ___800-426-2052 Moore Tool & Equip____602-455-8904 North-South Machinery__ 253-333-2439 North Western Machinery_ 206-583-2333 Performance Machine Tools_510-249-1000 Aircraft brake rotor DCM Tech _________800-533-5339 Grinders, Rotary CNC Machine Services_ 425-788-4500 Silicon & Quartz DCM Tech _________800-533-5339 Manual Lathes & Mills Clark Machinery_ ____206-219-2528 Ganesh Machinery_ ___888-542-6374 Hallidie Machine Tool__253-939-9020 Hogue Precision______209-892-5649 Machine Toolworks ___800-426-2052 North Western Machinery_206-583-2333 Western Machine Center_ 408-955-1000 Sawing Machines Hallidie Machine Tool Sales_ 253-939-9020
. .1
,,"
Office
1008 Industry Drive Tukwila. WA 98188
8uslness www.machinetoolworks.com CE!II iquarders@machinetoolworks.com Fax
, '" •~" .' 1 : \ 1 c':'\.1~ ..,".,"'\
.I ~
~ "':\ ~
.•••. ""'1"'\1"""_""'
Sa TC
Sa
r:..., ~ l~'• , .••••.•
,..,,10
North Western Machinery_ 206-583-2333 Performance Machine Tools_510-249-1000 Rocky Mountain Saw Blades_303-761-3000 Western Machine Center_ 408-955-1000 Saw Replacement Parts Rocky Mountain Saw Blades_ 303-761-3000 Punch & Die DCM Tech _________800-533-5339 INSPECTION EQUIP OGP _ __________ 480-889-9056 NBS Calibrations_______480-894-0592 Rosco Precision Machinery_ 253-333-2439 CMM Probes OGP ___________ 480-889-9056 Coordinate Measuring Mach. Cutting Tool Control____ 206-789-7277 Gauging Equipment Cutting Tool Control____ 206-789-7277 Total Quality Systems Inc._ 480-377-6422 Metrology Instruments OGP _ _________ 480-889-9056 Mist Collectors Cutting Tool Control____ 206-789-7277 Optical Comparators Cutting Tool Control____ 206-789-7277 OGP ___________ 480-889-9056
Te
Te
Co
Co
Co C
M Sa
Co Sa Te
Sa
M
P Te
TC
.
PRECISION CUTIING
Carlos R. Lugo
NORTH WESTERN - MAC H I ~_ E R Y ,
,-
1222 S. Weller St. Seattle, WA 98144 www.nwmachinery.org
SUPPLIES
Western Tool & Supply Co.
'"
(206) 583-2333 Fax (206) 583-0698 Cell (206) 898-6900 clugo@nwmachinery.org
Temtco Steel________480-389-2883 Steel TCI Precision Metals______800-234-5613 Temtco Steel________480-389-2883 METAL DISTRIBUTORS Samuel Son & Co_ _____ 800-631-9765 Particle Inspection Mach DCM Tech _________800-533-5339 TCI Precision Metals______800-234-5613 NEW MACHINERY Video Inspection CHIP CUTTING Equipment Boring Rosco Precision Machinery_ 253-333-2439_ CNC Machine Services_ 425-788-4500 MATERIAL North Western Machinery_206-583-2333 Aluminum CNC Drilling/Tapping Samuel Son & Co_____ 800-631-9765 CNC Machine Services_ 425-788-4500 TCI Precision Metals_____ 800-234-5613 Machine Toolworks ___800-426-2052 Aluminum Extrusions Samuel Son & Co_____ 800-631-9765 North Western Machinery__ 206-583-2333 CNC Mills 5-Axis Armor:Commercial Temtco Steel________480-389-2883 Hogue Precision______209-892-5649 Performance Machine Tools__510-249-1000 Armor:Military Grade Temtco Steel________480-389-2883 Western Machine Center_ 408-955-1000 CNC Mills Brass CNC Machine Services_ 425-788-4500 Coastal Metals_________800-811-7466 Clark Machinery_ ____206-219-2528 Bronze Coastal Metals_________800-811-7466 Elrod Machine_______928-526-9032 Ganesh Machinery_ ___888-542-6374 Carbon Coastal Metals_________800-811-7466 Hallidie Machine Tool _ 253-939-9020 Cutting Tool Control_____206-789-7277 Hogue Precision______209-892-5649 Machine Toolworks ___800-426-2052 Ceramics North Western Mach’y_ 206-583-2333 Marzee Inc._ ________ 602-269-5801 Samuel Son & Co_ _____ 800-631-9765 Performance Machine Tools_510-249-1000 Rosco Precision Machinery_253-333-2439 Material Sales Western Machine Center_ 408-955-1000 Coastal Metals_________800-811-7466 CNC Lathes Samuel Son & Co_ _____ 800-631-9765 Temtco Steel_________ 480-389-2883 Clark Machinery_ ____206-219-2528 CNC Machine Services_ 425-788-4500 Metals: Bar & Plate Samuel Son & Co_ _____ 800-631-9765 Elrod Machine_______928-526-9032 Ganesh Machinery_ ___888-542-6374 Nickel Alloys Marzee Inc.________602-269-5801 Hallidie Machine Tool__ 253-939-9020 Hogue Precision______209-892-5649 Rubber Marzee Inc.________602-269-5801 Machine Toolworks ____800-426-2052 Plate: Wear and Structural North Western Machinery_206-583-2333 Temtco Steel________ 480-389-2883 Performance Machine Tools_510-249-1000 Rosco Precision Machinery__253-333-2439 Stainless Steel TCI Precision Metals______800-234-5613 Western Machine Center_ 408-955-1000
TOOLS AND INDUSTRIAL
A
Sales Manager
2S78 SEABOARD AVENUE SAN JOSE, CA 95131
(408) 970-9696 FAX (408)970-9644
CNC Routing Machines Western Machine Center_ 408-955-1000 CNC Swiss Turn Machines Clark Machinery_ ____206-219-2528 CNC Machine Services_ 425-788-4500 Ganesh Machinery_ ___888-542-6374 Machine Toolworks _____800-426-2052 North-South Machinery__ 253-333-2439 Performance Machine Tools_510-249-1000 North Western Machinery_206-583-2333 Rosco Precision Mach._ _253-333-2439 Custom Built Machines Elrod Machine_______928-526-9032 EDM Machines North-South Machinery_ _ 253-333-2439 EDM Tooling Systems EDM Network______ 480-836-1782 Global EDM Supply_ _ 480-836-8330 NEW MACHINERY FABRICATION Band & Cut Off Saws DW Machinery Sales_ __ 425-827-6931 Innovative Tool Sales___ 714-780-0730 Moore Tool & Equip___ 602-455-8904 North Western Machinery_206-583-2333 CNC Turret Punches DW Machinery Sales_ __ 425-827-6931 Cold Saws DW Machinery Sales_ __ 425-827-6931 Moore Tool & Equip___ 602-455-8904 North Western Machinery_206-583-2333 Iron Workers Hallidie Machine Tool _ 253-939-9020 Moore Tool & Equip___ 602-455-8904 Jorgensen Machine Tools_800-952-0151 Laser Cutting DW Machinery Sales_ __ 425-827-6931 Laser Marking
NoeNoe Arroyo, Manager
SUE GURKA
Sales Noe_Arroyo@westtool.com Sue_Gurka@westtool.com
MIGHTY VIPER
Moore Tool & Equip___ 602-455-8904 Plasma/Gas Cutting Tools/Systems DW Machinery Sales_ ____ 425-827-6931
Magnetic Drills/Cutters Innovative Tool Sales___ 714-780-0730 Muratec_________949-466-8255 Plate Rolls Jorgensen Machine Tools_800-952-0151 Presses DW Machinery Sales_ ____ 425-827-6931
Press Brakes DW Machinery Sales_ __ 425-827-6931 Hallidie Machine Tool _ 253-939-9020 Jorgensen Machine Tools_ 800-952-0151 Moore Tool & Equip____602-455-8904 Sanders/Finishing DW Machinery Sales_ ___ 425-827-6931 Shearing Machines Jorgensen Machine Tools_800-952-0151 Moore Tool & Equip___ 602-455-8904 Tub Bending DW Machinery Sales_ ___ 425-827-6931 Hallidie Machine Tool Sales_ 253-939-9020 Turret Press Muratec_________949-466-8255 Welding Equipment Rocky Mountain Saw Blades_ 303-761-3000 OTHER ACCESSORIES Tooling Systems USA EDM Supply_ ____ 480-836-8330
PROG. SYSTEMS CNC Machine Services_ ___425-788-4500 Factory Automation/Logistics Muratec_________949-466-8255 Magnetic Drills/Cutters CAD/CAMSoftware, CAD Innovative Tool Sales___ 714-780-0730 Delcam_ _________ 877-DELCAM1 Pipe &Tube Benders/ Software, Inv. Control Notchers Hallidie Machine Tool 253-939-9020 Delcam____________877-DELCAM1 A2Z METALWORKER
• 41 • April/May 2011
ELROD MACHINE
"One stop shopping for manufacturing success"
Dwayne Elrod Task Master CNC Knee Mills and CNC Retrofit Kits
CAD/CAM Software
www.elrodmachine.com E mail sales@elrodmachine.com 3880 E. Hwy 66 Ste. 6 Flagstaff, AZ 86004
Ph. (928) 526-9032 F: (928) 526-2301
Switches (Proximity, Limit) Inspection: Gauging EquipAll World Machinery_____815-943-9111 ment Valves NBS Calibrations_______480-894-0592 (Hydraulic, Pneumatic) Manufacturing Rep All World Machinery_____815-943-9111 ProSalez__________ 480-773-3239 RETROFITS Process Improvement Elrod Machine______ 928-526-9032 / Audit SERVICES BMSC _ ____________ 602-445-9400 Software, Solid Modeling Consultant, ISO X-Ray Delcam____________877-DELCAM1 BMSC _ ____________ 602-445-9400 Team Industrial Services___801-397-2202 Liquid Penetrant All World Machinery_____815-943-9111 Team Industrial Services___801-397-2202 Team Industrial Services__ 602-269-7868 REPAIR PARTS ISO9000 / AS9100 Cert. Team Industrial Services__ 602-269-7868 MAG Particle BMSC _ ____________ 602-445-9400 Belts Machine Tool Rebuilding All World Machinery_____815-943-9111 Team Industrial Services___801-397-2202 Team Industrial Services_ _ 602-269-7868 Bearings(Precision) EDM Network______ 480-836-1782 Inspection: Calibration Process Improvement All World Machinery_____815-943-9111 Metric O-Rings BMSC _ ____________ 602-445-9400 Services All World Machinery_____815-943-9111 NBS Calibrations_______480-894-0592 NBS Calibrations_______480-894-0592
Spindle Rebuilding Setco____________866-362-0699 USED MACHINERY Clark Machinery_______ 206-219-2528 CNC Machine Services____ 425-788-4500 EDM Network_ _______ 480-836-1782 Ganesh Machinery____888-542-6374 Jorgensen Machine Tools__800-952-0151 K.D. Capital Equipt____480-922-1674 WATERJET CUTTING FLOW Intl.___________909-620-5707 Jorgensen Machine Tools__800-952-0151 Machine Toolworks ____800-426-20521 OMAX Corp_________800-838-0343
A M S
W
H
Waterjet Abrasives KMT Waterjet Systems___ 800-826-9274 Waterjet Replacement Parts KMT Waterjet Systems___ 800-826-9274 WaterJet: Filtration/Chillers Ebbco Inc_ ______ 800--809-3901
Okay, we’re not as big as our sister A2Z Metalworker publications...not yet.
M V
P
P S
But you can see we’re growing, and this region has so much potential. It’s enlightening. There is a reason more than 400 businesses advertise in our publications! Why not get your business publicized? Start with your business card. It’s $260 for the year. It’s good for you! Call today. 480-773-3239 azmetalworker.com A2Z METALWORKER
•
42 • April/May 2011
M
M
P
A
Buyer’s Guide & Card Gallery Processes
MarZee I nc. 2345 N. 34th Dr.
99
Y 528 500 782 374 151 674 G 707 151 521 343
74
rts 74 ers 01
Phoenix, AZ 85009 Home of 5 Omax Waterjets 80” x 240” Cutting Envelope Virtually Zero Taper Available Fast Quoting & Turn Arounds Prototype to Production
602-269-5801 602-269-5810 1-877-885-1059 FAX
www.marzee.com
marzee@marzee.com
ASSEMBLIES PMA Photometals______602-278-7800 Acu Spec, Inc________408-748-8600 CLEANING Matrix Machine_______ 480-966-4451 Seastrom_ _________ 800-634-2356 Wasatch Metal Finishing_ _ 801-779-2020 COATING Welded Assemblies 480-892-9595 Accuwright Industries____ Weiser/Mile High Precision_ 303-280-2778 Coating Technologies_ ___623-581-2648 BENDING
EDM: Drilling Small Hole Micro-Tronics, Inc_ _____ 602-437-8995 EDM: Ram-Type (Sinking) Micro-Tronics, Inc_ _____ 602-437-8995 Petersen Inc_________ 800-410-6789 EDM: Wire Central Valley Machine_ __435-752-0934 Harco Metal Products_____480-829-0450 METCO Metal Finishing___ 602-276-4120 Micro-Tronics, Inc_ _____ 602-437-8995 Jet Processing_____ 623-869-6749x117 Coating: Black Oxide BONDING Coating Technologies_ ___623-581-2648 Pacific Tool, Inc. ______425-882-1970 Diffusion METCO Metal Finishing_ _ 602-276-41203 ENGINEERING/DESIGN Matrix Machine_______ 480-966-4451 Coating: Dry Film Lube Vacco Industries________ 626-443-7121 Nuclear Filter Tech_____303-384-9785 Coating Technologies_ ___623-581-2648 Pacific Tool, Inc. ______425-882-1970 BRAZING Coating: Nickel/Teflon/ Precision Casting Repair_ __ 801-972-2345 Graphite Services Chrome Coating Technologies_ ___ 623-581-2648 Micro-Tronics, Inc_ _____602-437-8995 BROACHING FABRICATION Ponderosa Ind_________303-298-1801 Coating:Zinc & Mag.Phos. Coating Technologies_ ___ 623-581-2648 Arrow Sheet Metal Prod___ 303-427-6419 Specialty Steel Services___ 801-539-8252 Electro-Coating Services Central Valley Machine_ __435-752-0934 Turning: Automatic Vacco Industries________ 626-443-7121 Mountain View Machine_ _435-755-0500 Matrix Machine________480-966-4451 COLD SPRAY Accuwright Industries____ 480-892-9595 Fabrication: Custom Metal CASTINGS Arrow Sheet Metal Prod___ 303-427-6419 DIES May Foundry & Machine___801-531-8931 Fabrication: Med/Large Micro-Tronics, Inc_ _____ 602-437-8995 Castings: Repair Arrow Sheet Metal Prod___ 303-427-6419 EDM Precision Casting Repair_ __ 801-972-2345 Fabrication: SheetMetal EDM: Dialectric Systems Arrow Sheet Metal Prod_ 303-427-6419 CHEMICAL ETCHING /Filtration Acu-Line___________ 206-634-1618 Ebbco Inc_ _________ 586-716-5151 Group Mfg Serv_______480-966-3952
Petersen Inc_________ 800-410-6789 Weiser/Mile High Precision_ 303-280-2778 Wrico_ ___________ 480-892-7800 Fabrication: Medium & Large Group Mfg Serv_______480-966-3952 Weiser/Mile High Precision_ 303-280-2778 FINISHING Arizona Finishing______602-438-4443 Coating Technologies_ ___623-581-2648 METCO Metal Finishing___ 602-276-4120 Seattle Polishing & Plating___253-804-0160 Galvanizing: Hot Dip TMM Precision _ ______ 800-448-9448 Glass Bead Clean Coating Technologies_ ___623-581-2648 Liquid Painting IndustrialEX_______ 303-456-6847 MPI International_ _____ 956-631-6880 Passivation Coating Technologies_ ___623-581-2648 Jet Processing_____ 623-869-6749x117 METCO Metal Finishing_ __ 602-276-4120 Silk Screening Arizona Finishing______602-438-4443 IndustrialEX_______ 303-456-6847
• 43 • April/May 2011 43 •Nov/Dec 2010
A2Z METALWORKER A Z METALWORKER 2
•
.~Ij~l.mtJt~~:!~~~lj~~:,m:~.:~~. "- ...r \ .' .. lJ. I •
I '
Home: (253.1850'4561
,Cell: (206) 229-1829
~
"""'W' ,II {
,\
~,
'
II'
Ir
_
.
~ ~~--.....
" We doAnodizinl),COloring, Plating.~Show Chrdme.~~ .
Fred Budde III President
II II . "
~(gQ.61~.!'9'3227
L"'~\,\,'..Go~~,,~~~n.p, ~taint~Sf ;,,~~~min~Polishing l",ery
'.,'
j-~( .•.~'f .''', 1. " .~~ ..E.,u~er ,~.,
/J. r
Shop: (253) 8~'1l.1-60. Max Mechling
:IIl.,
-, r•
.
I
E-mail: Mexcme@aol.com
__
.....~''<\ fast turn around' Higtiest qualit'l" Free estimates
"A HlgherLevelin Precision Machining"
990 Richard Ave, Suite 103 Santa Clara, CA 95050 408 748-8600 Office 408748-8605 Fax fred@acuspecinc.com
Laser Cutting: 3D
Innol/ative Tool !!iales
Manufacturers Representatives E-Coat Randall J. Wilson MPI International_ _____ 956-631-6880 EMI/RFI Shielding Grinding: Surface IndustrialEX_______ 303-456-6847 ChemResearch________ 602-253-4175 Laser Engraving Quality Mold_ _______480-892-5480 Vacco Industries______ 626-443-7121 Faustson___________303-420-7422 Potting/Encapsulation Matrix Machine_______ 480-966-4451 IndustrialEX_______ 303-456-6847 Superior Grinding______ 801-487-970 Laser Marking Vacco Industries______ 626-443-7121 Micro-Tronics, Inc_____ 602-437-8995 Grinding: Tool & Cutter FOUNDRY Pacific Tool, Inc. ______425-882-1970 Superior Grinding_______ 888-487-9701 MACHINING May Foundry & Machine_ 801-531-8931 HEAT TREATING Acu Spec, Inc________408-748-8600 Seastrom_ _________ 800-634-2356 State Brass Foundry & Mach._ 801-467-9461 Phoenix Heat Treating_ __ 602-258-7751 3rd Gen Machine______435-794-4980 Machining: Turning GALVANIZING Pilkington Metal Finishing__801-972-2146 Central Valley Machine_ __435-752-0934 Acu Spec, Inc________408-748-8600 Petersen Inc_________ 800-410-6789 Temperature Processing___ 303-772-0250 Faustson___________303-420-7422 3rd Gen Machine______435-794-4980 GRINDING Custom Matrix Machine_______ 480-966-4451 Central Valley Machine_ __435-752-0934 ChemResearch_ _____ 602-253-4175 Temperature Processing___ 303-772-0250 Nuclear Filter Tech_ ___ 303-384-9785 Faustson__________ 303-420-7422 Mountain View Machine_ _435-755-0500 Pacific Tool, Inc. ______425-882-1970 Cryogenics Pacific Tool, Inc. ______425-882-1970 Pacific Tool, Inc. ______425-882-1970 Temperature Processing___ 303-772-0250 Premier Precision______ 623-466-3156 MANUFACTURING Aluminum Precision Tech________801-285-7288 Seastrom____________ 800-634-2356 Acu Spec, Inc________408-748-8600 Superior Grinding______801-487-9700 Temperature Processing___ 303-772-0250 Machining: R & D Milling 3rd Gen Machine______435-794-4980 Nitriding TCI Precision Metals_____ 800-234-5613 Acu Spec, Inc________408-748-8600 Central Valley Machine_ __435-752-0934 Temperature Processing___ 303-772-0250 Grinding, Blanchard Central Valley Machine_ __435-752-0934 Group Mfg Serv______480-966-3952 INSPECTION Diversified Metal Services__ 801-972-6093 Matrix Machine_______ 480-966-4451 Pacific Tool, Inc. ______425-882-1970 Inspection, First Article Micro-Tronics, Inc_ ____ 602-437-8995 Premier Precision______ 623-466-3156 Superior Grinding______801-487-9700 Klontech Measure Sol____ 480-626-8131 Petersen Inc_________ 800-410-6789 TCI Precision Metals_____ 800-234-5613 Contract Inspection Services Pacific Tool, Inc. ______425-882-1970 Production Grinding, Double Disc IRON STITCHING Machining: Chemical Laser Concepts Inc.____ 801-280-7723 TCI Precision Metals_____ 800-234-5613 Precision Casting Repair__801-972-2345 Acu-Line___________ 206-634-1618 METALIZING Grinding: OD LASER CUTTING PMA Photometals______602-278-7800 Accuwright Industries___ 480-892-9595 Micro-Tronics, Inc_ _____602-437-8995 Laser Cutting Machining: CNC Pacific Tool, Inc. ______425-882-1970 Wrico_ ___________480-892-7800 Acu Spec, Inc________408-748-8600 METCO Metal Finishing___ 602-276-4120 Laser Cutting: Micro Precision Tech________801-285-7288 MOLDING: RUBBER 3rd Gen Machine______435-794-4980 Vacco Industries_ _ ____ 626-443-7121 Superior Grinding______801-487-9700 Central Valley Machine_ __435-752-0934 Micro-Tronics, Inc_____ 602-437-8995 Industrial Products
755 East Debra Lane
Anaheim. CA 92805
A2Z METALWORKER
•
44 • April/May 2011
Manager
ITS Office, (714) 780-0730
Weld Shop: [7 I 4) 533- 1690
randall@lnnovativetooisaies.com
Fax,
[714] 780-0735
www.innovativetoolsales.com
[ell,
(714) 51 2-73 I 4
1
6
0
0
5
0
5
Shawn Carlin scarlin@gmsaz.com
Anodizing ChemResearch_ _____ 602-253-4175 METCO Metal Finishing___ 602-276-4120 Premier Precision______ 623-466-3156 Pilkington Metal Finishing_ 801-972-2146 Chrome Seattle Polishing & Plating___253-804-0160 Gold Seattle Polishing & Plating___253-804-0160
Molds: Plastic Injection Micro-Tronics, Inc_ ____ 602-437-8995 Molds Steel Arizona Finishing_____602-438-4443 Jet Processing____ 623-869-6749x117 Mil Spec Painting IndustrialEX_______ 303-456-6847 NAME PLATES Acu-Line___________ 206-634-1618 PMA Photometals______602-278-7800 UID Tags (Boeing Approved) PMA Photometals______602-278-7800 PVD (Physical Vapor Deposition) Aluminum Advanced Coating______562-402-0005 Chromium Advanced Coating______562-402-0005 DLC (Diamond) Advanced Coating______562-402-0005 Molybdenum Advanced Coating______562-402-0005 Titanium Advanced Coating______562-402-0005 Zirconium Advanced Coating______562-402-0005 PLATING ChemResearch_ _____ 602-253-4175 METCO Metal Finishing_ __ 602-276-4120 MPI International_ _____ 956-631-6880
PRECISION FORMING Pacific Tool, Inc. ______425-882-1970 Stamping:Flat Forming Wrico_ ___________480-892-7800 SPRING WORKS Utah_ ___ 801-298-0113 PROCESSING: METAL Stamping: Light Seastrom_ _________ 800-634-2356 MPI International______ 956-631-6880 SWISS SCREW MCHG. Acu Spec, Inc________408-748-8600 Chemical 3rd Gen Machine______435-794-4980 LA Specialties________ 602-269-7612 Lewis Aerospace_ ____ 877-254-2024 MPI International______ 956-631-6880 Seastrom_ _________ 800-634-2356 Seattle Polishing & Plating___253-804-0160 TESTING Plating Alodine Testing: Non-Destructive MPI International______ 956-631-6880 Blanchard Metals Proc._ __801-972-5590 Phosphate Jet Processing_____ 623-869-6749x117 MPI International______ 956-631-6880 Pilkington Metal Finishing_ 801-972-2146 Polishing Premier Precision______ 623-466-3156 Seattle Polishing & Plating___253-804-0160 THERMAL SPRAY PUNCHING Accuwright Industries____480-892-9595 Group Manufacturing Serv_ 480-966-3952 TOOL & DIE Pacific Tool, Inc. ______425-882-1970 Wrico_ ___________480-892-7800 SIGNS TOOLING Acu-Line___________ 206-634-1618 Central Valley Machine_ __435-752-0934 PMA Photometals______602-278-7800 Mountain View Machine_ _435-755-0500 SPLINES WATERJET CUTTING Specialty Steel Services__ 801-539-8252 Central Valley Machine_ __435-752-0934 SPRAY: METAL, PLASMA Marzee Inc._______ 602-269-5801 Accuwright Industries____480-892-9595 Petersen Inc_________ 800-410-6789 STAMPING WELDING Central Valley Machine_ __435-752-0934 Seastrom_ _________ 800-634-2356 Arrow Sheet Metal Prod___ 303-427-6419 Weiser/Mile High Prec._303280-2778 Central Valley Machine_ __435-752-0934 Petersen Inc_________ 800-410-6789 Stamping:Design Weiser/Mile High Prec._303280-2778 Mountain View Machine_ _435-755-0500 Acid Pickle
Weiser/Mile High Prec._303280-2778 Welding: Aluminum Medium & Large Petersen Inc_________ 800-410-6789 Welding: Precision Petersen Inc_________ 800-410-6789 Weiser/Mile High Prec._303280-2778 Welding: TIG Arrow Sheet Metal Prod___ 303-427-6419 Petersen Inc_________ 800-410-6789
Wow, In Just One Issue, We’ve Added So Many New Business Cards! But We Want More! If You Are A Machine Shop, Fabrication Shop, Or You Do Special Processes, Call For Very Inexpensive Exposure...It’s Just $260 For The Year!
CALL 480-773-3239
Free Subscriptions at www. azmetalworker. com • 45 • April/May 2011 45 •Nov/Dec 2010
A2Z METALWORKER A2Z METALWORKER
•
Index of Advertisers 3rd Gen Machine...34,35,44 Acu-Line...43 Acu Spec, Inc....44 Accuwright...43 Acu Spec Inc....44 Advanced Coating Technologies...43 All World Machinery Supply...8,39 Arizona Finishing...45 Arrow Sheet Metal...45 Bar-S...44 Blaser Swisslube...2 BMSC...28,42 Capital Weld Cleaners...22 Central Valley Machine...44 ChemResearch...44 Clark Machinery...40 CNC Machine Services...40,48 Coastal Metals...14,42 Coating Technologies...44 CTE...39 Cutting Tool Control...2,39 DCM Tech...18,39 Delcam...39,41,47 Doosan...48 DW Machinery Sales...21,40 Ebbco...42 EDM Network...12,40 EDM Performance Accessories...39,40 Elrod...42 Faustson...44 Flow International...37,39 Ganesh Machinery...39
Global EDM Supply...40 Group Manufacturing...44 Hallidie ...39 Hangsterfers...23,42 Helical...42 Hogue Precision...41 HR Machinery... IndustrialEX...43 Innovative Tool Sales...44 Intech Funding...33 KD Capital...40 KMT Waterjet...39 machinetools.com...37 Machine Toolworks, Inc...5,40 Marshall Tools...39 Marzee Inc...43 Matrix Machine...44,45 Mazak...5 Metal Service Center...9,39,41 Metco Metal Finishing...45 Micro 100...7,40 Micro-Tronics...20,43 Mitsubishi...19 Moore Tool & Equipment...40 Mountain View Machining...43 Muratec...40 NBS Calibrations...26,42 North-South Machinery...19,40 Northwestern Machinery...41 NFT...44 OGP...42 Omax..39
Performance Machine Tools...15 Petersen Inc...43 Petroferm...29,39 PMA PhotoMetals...42 Premier Precision...43 Pro-Salez...42 PTI...43 Rocky Mountain Saw Blades...42 Rosco...40 Samuel Son & Co...11,33 Seastrom..31,45 Seattle Polishing & Plating...44 Setco Marketing...40 Sharp...27 Specialty Steel...44 Steel Services Grinding...43 Superior Grinding...44 Team Industrial Sales...36,39,40 TCI Precision Metals...42 Temtco Steel...41 The Metal Man...45 Tipco...42 Tool Technology Distributors...2,40 Tornos... Ulbrich..13,40 US Shop Tools...3,39 Vector Industries...16-17 Western Machine Center...39 Weiser/Mile High...45 Western Machine Center...39 Western Tool & Machine...41 Wrico Stamping...43
This Issue Represents Our 2nd Edition of the Newest Publication for the Pacific Northwest, And You Can Check Out Our Legacy Publications! Vol. 17, No. 2 March/April 2011
Vol. 4, No. 2 March/Apr 2011
Colorado, Utah and Idaho Edition
Arizona, Nevada, and New Mexico Edition
NFT’s State Of The Art FLEX LASE Universal Laser Processing Cell In Operation
Azmark Aero Systems Releases its UAV Turboprop Powerplant for Flight www.azmetalworker.com
www.azmetalworker.com
Our A2Z Metalworker For AZ, NV
Our A2Z Metalworker For CO, UT
and NM...In It’s 17th Year!
and ID...In It’s 4th Year!
All Editions Are Now Available Online At www.Azmetalworker.Com A2Z METALWORKER
•
46 • April/May 2011
A2Z METALWORKER
• 47 • April / May 2011
A2Z Metalworker P. O. Box 93295 Phoenix, AZ 85070
THE NAME YOU SEE…EVERYWHERE Because behind that name is more than a half century of superior quality and service. It’s a commitment to excellence that’s made Doosan one of the world’s largest, most respected names in machine tools. With more than 200 models of turning centers and
Doosan Infracore
machining centers– each power packed and built for speed, precision, economy and performance – there’s one that’s perfect for you.
Call us for a demo and complete information. 425.788.4500 (WA) 503.679.6468 (OR) Toll Free 866.788.4500 7808 184th St SE Snohomish, WA 98296
Machine Services, Inc. TECHNOLOGY
PRODUCTIVITY
VALUE
www.cncmachineservice.com