Rovers Magazine Holiday 2022

Page 1

The Source for Classic Land Rover Parts Holiday 2022

Digital Speedometer Kit, Defender MPH

Defenders without an ECU can step into the future with Rovers North's complete speedometer solution. This bright, easyto-read, water-resistant (sealed) gauge is not only accurate; it is driven by an electrical signal for smooth needle movement; no more annoying needlebob from the cable-driven speedometer. Users can easily adjust the built-in clock, brightness of the LED illumination, dial color and screen color. The conven ient auto-calibration feature means changes to gear ratios or tire sizes are no big deal: your speedometer will be accurate again with just a few pokes of the button and driving a mile.

This kit includes a VDO SingleViu 90mph Speedometer, our custom wiring harness, and VDO Hall effect sensor. For convenience, Rovers North has pre-configured the gauges and included easy-to-follow instructions. Installation should take about an hour or less. We can even pre-program your odometer reading! For odometer programming, be sure to add RND SKITP to your order as the odometer needs to be programmed before it ships.

forget to take off your radiator muff, causing the motor to overheat, and the warning light gets your attention as soon as the engine leaves normal operating temperatures, long before any damage is done. In the vehicle, CAN bus links all the gauges together so when the user ad justs the brightness or dial color, the settings are synchronized across all 4 gauges, creating a truly personalized instrument cluster.

Digital Speedometer Kit for Early Defender w/o ECU 1983 1996 RNDSKIT2 $ 499.00 Digital Three Gauge Kit for Defender RNDSKIT3 $ 499.00

NEW H

RNDSKIT3

The speedometer wiring harness included in this kit is designed to seamlessly integrate with the wiring harness of Rovers North's new +3 gauge kit. This kit will incorporate match ing volts meter, water temp and fuel level gauges. Adding these three modern instruments will be as simple as swapping the gauges, plugging a tidy new wiring harness, connecting the sender wires for your water temp and fuel level and removing some of redun dant wiring. The +3 gauge kit dra matically reduces the rat's nest of wires behind your dash — the previ ously daunting task of removing your instrument panel can now be accomplished in seconds by removing just 6 connectors. The VDO SingleViu gauges all feature CAN bus connectivity which allows Rovers North to use the VDO SingleViu configuration software to pre-program countless characteristics of the gauges. For example, the water temp gauges will arrive configured for your motor. This could be invaluable if on the first warm day you

Digital Speedometer Kit Defender, Kilometers

Same as RNDSKIT2 kit, now available in KPH. This kit includes a VDO SingleViu 200KPH Speedometer, our custom wiring harness and VDO Hall effect sensor. For convenience, Rovers North has pre-configured the gauge and included easy-to-follow instructions. Installation should take about an hour or less. We can even pre-pro gram your odometer reading! For odometer programming, be sure to add RNDSKITP to your order as the odometer needs to be programmed before it ships.

Digital Speedometer Kit for Defender, Kilometers Per Hour

RNDSKIT2KPH $ 499.00

NEW H
Rovers North 2023 Land Rover Calendar Our collection of the finest Land Rover photography. $ 14.99
RNDSKIT2
New Products
NEW H Shop our Holiday Gifts starting on page 50

There was no one more “Fabulously British” than Queen Elizabeth II. She embodied the qualities of service, honor, intelligence and grace that characterize the spirit of the nation.

Jaguar Land Rover stated, “Our relationship with The Queen has been a source of great pride for all of us. The passing of Her Majesty the Queen has left everybody deeply saddened, and our thoughts and con dolences are with the Royal Family at this time.”

“As the UK’s longest reigning monarch, Head of the Commonwealth, Patron of more than 600 charities as well as a mother, grandmother and great grandmother, The Queen was a remarkable role model.”

“Most recently, it was a great honour for us to play a role in Her Ma jesty’s Platinum Jubilee celebrations, marking her historic and extraordi nary reign. This was just one of many memories we are truly grateful for as part of our long-standing and continued connection with the Royal Family, and we shall deeply miss Her Majesty’s pioneering leadership and strength that provided this country with continuity, stability, and inspira tion through decades of enormous social change.”

Rebecca Mead, in The New Yorker, wrote, “She became monarch in the early hours of February 6, 1952 – although, famously, she remained unaware of her transmutation for several hours. King George VI died in his sleep as Elizabeth, his eldest daughter, was more than four thousand miles away, on a safari holiday in Kenya. ‘She became Queen while in a perch in a tree in Africa, watching the rhinoceros come down to the pool to drink,’ Harold Nicolson, the diplomat and politician, wrote in his diary.

A member of the royal party later recollected an auspicious occurrence: around sunrise, an eagle had soared over Elizabeth’s head at roughly the moment when the King died.”

At Rovers North, we remember that Queen Elizabeth drove her Land Rovers as their designers and engineers intended, and that she seemed genuinely delighted when she could sit behind the steering wheel of her Series and Defenders. Her spirit and her example will be missed deeply. ///

Holiday 2022 roversmagazine.com 1
ENTHUSIASTS
FABULOUSLY GENUINE LAND ROVER
BR I TISH

Rovers Magazine is a publication of Rovers North, Inc.

Publisher: Mark Letorney

Editor: Je rey Aronson

Art/Creative Director: Thompson Smith

Copy Editor: Erin Menut

Social Media: Dave Sweetapple, Steven Herr

Web Designer/Developer: Steven Herr

Photography: Zack Griswold

©2022 Rovers North, Inc.

Rovers Magazine is published for the enjoyment of Rovers North customers. Please understand you need to be a current customer in order to receive this magazine. We o en hear from owners inquiring why they are not receiving their copy. So here are some of the common reasons for not receiving your very own copy of Rovers Magazine: Most common - It has been over two years since you purchased anything from Rovers North. Second - You moved and forgot to notify us. Third - Your shop buys all your parts, so we are unaware you are a customer. Finally - We messed up. To receive a complimentary copy of Rovers Magazine, simply call us, or subscribe on our website [https://blog.roversnorth.com/sign-up/] and we will mail you our latest edition. Then remain a customer to continue receiving Rovers Magazine.

This magazine’s content cannot be reproduced without the express written permis sion of Rovers Magazine. While we at Rovers North make every e ort to ensure accuracy within these pages, we are not to be held liable for typos and or omissions. Please be advised that all prices are subject to change without notice.

Rovers North Inc.

1319 VT Route 128, Westford, Vermont 05494-9601, USA

Sales: (800) 403-7591

Tech Line: (802) 879-0032 www.roversnorth.com www.roversmagazine.com

Hours Monday-Friday: 8:00 am -5:00 pm EST

Sightings submissions should be sent to: Sightings@roversnorth.com

Letters to the Editor should be sent to: Editor@roversnorth.com

Connect with Us @roversmag

Our mission is to support all original Land Rover models that are no longer supported by your local Land Rover franchise. We o er the entire range of Land Rover Genuine Parts direct from Land Rover UK, providing the highest quality parts and accessories at the best prices. In addition, we o er our own line of parts called ProLine. Sourced from a variety of manufacturers, ProLine is our alternative when a Genuine Part is no longer available or a lower cost replacement is preferred. Visit our website www.roversnorth.com for a more complete view of our selection, or call us. All new parts and accessories sold by Rovers North are covered by our two-year unlimited mileage warranty. We invite you to experience our knowledge, products and friendly service. Thank you for choosing Rovers North.

ver the Veteran’s Day weekend, Jaguar Land Rover North America held its first-ever Des tination Defender event in Saugerties, NY. They invited Defender enthusiasts to celebrate the winners of the De fender Service Awards, admire the full range of “Defenders” (from Series I’s to 2022 Defenders), enjoy light offroading, ogle enthusiasts’ Series and Defenders, share personal experiences and learn from the experts.

Sound familiar? If you’ve at tended Don Flye’s All Metal Dash (Petersham, MA), the British Invasion (Stowe, VT), the All British Car Meet (Portland, OR), among numerous others, you did just that – enjoy the vehicles and their enthusiast owners. We’re delighted that Land Rover North America wanted to recognize the Defender’s importance to the marque, and do so in a big way.

Land Rover once tagged the Series Land Rover as “The World’s Most Versatile Vehicle.” Today, this ver satility focuses more on the multiplicity of driving situations, from 2 mph to 130 mph, from green lane to offroad expedition, dirt road to interstate highway, with or without a trailer. The new Defender accomplishes that versatility quite well.

For Series enthusiasts, versatility meant one vehicle to ac complish everything, from transporting sheep to family members, expedition to leisure kit, from towing work trailers to campers, off-road or on-road. The brilliant engineering assured you of a long-lived vehicle whose maintenance you could perform on the ground, not over the air. That’s why Brian and Kathy Krafjack recently purchased their ’66 Series IIA 109”.

“This is my first experience with a Land Rover. I’d never owed one before,”

Brian told me. “What a hoot! We found it listed in Hemmings and bought it sight unseen from its owner in California. Because they all have to have names, we call it Tan Landy.”

Brian and Kathy took over the one store on Swan’s Island, ME, in 2014. The Island Market & Supply provides mail, freight and provisions to residents of Swan’s island and Frenchboro. “We bring the US mail, FedEx, UPS, and everything else from the mainland to Swan’s Island and Frenchboro.” Brian continued. “Tan Landy meets our delivery van at the ferry and from there, loaded with the mail, parcels, and groceries destined for French boro, she’ll transport me across the island to the Fisherman’s Co-op where we’ll load our mailboat, Northern Star, a repurposed pilot boat for our trip to Frenchboro. This repeats six-days a week, year-round.”

We’re pleased that JLR held its Destination Defender event, but Brian and Kathy could not attend with Tan Landy. To paraphrase Top Gear’s Richard Hammond, their Land Rover was far too busy doing something important, somewhere, for someone. ///

Lawrence Michelon Norfolk, VA, Range Rover Classic enthusiast

2 roversmagazine.com Holiday 2022
Thayer Low Westminster, CO, Solihull Society
Thompson Smith South Lake Tahoe, CA, Defender 90 and Range Rover Sport enthusiast
Art/Creative Director
Editor Dave Sweetapple Brattleboro, VT, @vermontrovers Contributors O
Vinalhaven, ME has written
Land Rover
years GOING
ALL
THE WELLY
Rik Olsen Twin Cities, MN, Minnesota Land Rover Club Freight and mail boat Northern Star
Jeffrey Aronson about
for over 30
FORWARD /
GREEN
Doing important things on Swan’s Island
COLUMNS Fabulously British 4 Letters to the Editor 46 Vermont Rovers 48 Behind the Steering Wheel 94 Sightings FEATURES 6 The Boxy Truck Circle Tour Around Lake Superior we go! Story: Rik Olsen 12 A Classic Adventure 6,032 miles in a Range Rover Classic. Story: Lawrence Michelon 20 Maine Misfits and Rover Bits Getting down and dirty. Story: Dave Sweetapple 26 The Art of Driving Slowly An Italian love story. Story: Graeme Warring 30 Wet N’ Wild Solihull Society National Rally. Story: Thayer Low 36 2022 TReK Dealer teams battle it out in Vermont. Story: Jeffrey Aronson 40 Land Rover Diesels - A History An appreciation. Story: Les Parker 52–97 Products from Rovers North Our years of knowledge and experience, combined with our direct connection with Land Rover, bring you the best parts for your Land Rover. CONTENTS ROVERS MAGAZINE / HOLIDAY 2022 Holiday 2022 roversmagazine.com 3 About the cover: Wet N’ Wild in the Rockies— Solihull Society National Rally coverage begins on page 30. Photography: Todd Stewart
Warring Phoenix, AZ, British car collector and MotoGP worker Les Parker Riverview, FL, Lincolnshire, UK expat, Rovers North Sales 12 6 30 20 36 38 Dear Santa, Please deliver this Defender Thophy Works V8 to North America. Cheers, Rovers Magazine
Graeme

LETTERS TO THE EDITOR

ENTHUSIASTS / SPREADING THE WORD

Send submissions to: editor@roversnorth.com

Dear Rovers North,

Thank you for being a sponsor for the Rover Owners Association of Virginia's (ROAV) 2022 Mid Atlantic Rally (MAR). Your consistent sup port over the years has helped bring our club and event to the level that it is today. We would like to especially thank Jeff Aronson, Gene Schubert and Nick Cota for setting up a truly challenging RTV course. This course was one of the highlights of the event. Any RTV course that requires winching to get out of the 6th set of gates should be held in high regard! We will see you next year…. at the MAR!

David Short President, ROAV Sterling, VA

[Gene, Nick and I have finally dried out and scraped off the mud from our clothing! Thank you for the kind words, and especially for the hospitality and generosity demonstrated by everyone at MAR. We certainly hope to return! -ed.]

Dear Rovers North,

Back in October, 2020, we were driving along the beach at Cape Hatteras when we came across this grounded oyster boat. On a more recent visit, we found out that the National Park Service had brought an excavator and removed the boat from the shore.

[What a fascinating find! Thanks for sharing it with other Land Rover enthusiasts –ed.]

Dear Rovers North,

I have a BMW motorbike and am a member of MOA, which puts out a surprisingly good monthly magazine called BMW Owner News. It’s filled with articles about travel by motor cycle. Seldom is a car seen or mentioned in its pages, but in the August issue I was surprised to see a Defender 110 in an article titled “Remember to Breathe.” It’s about a woman going on a last-minute adventure tour in Nepal on –egads – a Royal Enfield. Of course one of the support vehicles is a Land Rover, doing what Land Rovers do so well.

Hope to catch up with you at the Mid Atlantic Rally!

[What better vehicle for an adventure in Nepal than a Defender! It was delightful to see you at MAR; thanks for all you help with the RTV course -ed.]

4 roversmagazine.com Holiday 2022
Peter and Beth Eady St. Petersburg, FL

I’ll see you in two weeks at the British Invasion in Stowe, VT, with my 1988 Defender 110 RHD V8. Looking forward to meet ing many of the Rovers North crew that I converse with weekly or monthly.

[It was a pleasure to take in all the Land Rovers at the 2022 British Invasion last September. We hope you enjoyed the camaraderie as much as we did –ed.]

Dear Rovers North,

While visiting The Farmhouse at Back Bay Brewing, I came across what appears to be a Defender 90 variant on the can of a potent IPA. Of course I had to bring some home to take for a “test drink” and I can assure you that the Hop Landy 90 lives up to Solihull standards! After a tasty pint, I thought I’d pose the Hop Landy with my Landy, a 1972 88 Series III (aka The Leaky Cauldron). I’d say they make quite the pair when parked.

I’ll close by telling you I’ve appreciated all the help and parts I’ve received from Rovers North over the last five years, and I really enjoy your magazine. Keep up the great work.

Col. Chris McCarthy, USMC, Ret. Virginia Beach, VA

[Thank you for the field report on the IPA. We agree that your Series III and the beer can look terrific together -ed.]

Dear Rovers North,

Your team is knowledgeable, patient, supportive and all-around awe some. My ’93 Defender 90 200 Tdi RHD has needed a lot of work and you guys have done an outstanding job of supplying what I need, when I need it. I do not know how much help you provide with Customs to Canada, but you get the parts through when I need them. Thank you!

[You own an appealing Defender and we’re delighted to be a part of your Land Rover experience -ed.]

Dear Rovers North,

I wanted to share this photo of my ’04 Discovery II SE, one of five that I own. I’ve cleaned it up and brought it back to the beauty that you see in this photo. It might have a few bumps and bruises, but it’s still just as beautiful as the day it made it to the States. I was a Land Rover mechanic at my local dealership for 10 years. I’m no longer working there but I’ve con tinued to work on them for 21 years for other enthusiasts and as a hobby for myself.

[We think it’s a stunning example of a Discovery II, and we admire your appreciation and photography of that wonderful model -ed.]

Holiday 2022 roversmagazine.com 5
2022 British Invasion, Stowe, VT
6 roversmagazine.com Holiday 2022

The Boxy Truck Circle Tour

This Land Rover trip started as most do – ordering parts from Rovers North.

My ‘60 Series II SWB Station Wagon had accumulated a need for the following: new brake shoes, clutch slave cylinder, starter motor, battery and power ports installed on the dashboard. Also, it cried out for fluid changes and the replacement of the broken studs that connect the exhaust manifold to the down pipe. Once accom plished, I could join other Minnesota Land Rover enthusiasts from the Twin Cities region in the “Boxy Truck Tour.”

Lake Superior borders the northeast corner of Minnesota, and the tourism people have laid out a route around it called “The Circle Tour.” Our trip would follow this route from Minnesota through Wisconsin and Michigan to Canada, then back to Minnesota.

Lake Superior has the largest surface water area of any lake worldwide with over 2,700 miles of shoreline, and the rolling hills of the Great North Woods hold dense forests dotted with streams, waterfalls and smaller lakes. We hoped to spot the usual wildlife in the region, but the moose, deer, turkeys and beavers tend to shy away. Mostly, this trip would chal lenge our Series Land Rovers on pavement. We know they’re fantastic off-road, but highway miles can tax both driver and vehicle. The multi-generational group, ranging from ages 3–64, would have a great opportunity to take it slow in our Series Land Rovers.

Holiday 2022 roversmagazine.com 7
Story and Photos: Rik Olsen Background: Land Rovers prefer dirt rest stops
8 roversmagazine.com Holiday 2022
Above L-R: Spectacular scenery at campsites and on pavement. Background: Gustaf Kupetz’s positioning for a campsite

Tony Kieffer, who planned our camping sites, has been rebuilding his ‘64 109” Station Wagon for the last 12 years, but really accelerated his progress over the last year. Along with a galvanized chassis, he in stalled a completely rebuilt engine and drivetrain. It ran like a thor oughbred – albeit a thoroughbred mule. He joined me as we drove to John Wendt’s house to view his perfect ’67 109”. Five miles into our drive, my Series II started misfiring. I cleaned out the jets and the carb bowl but the misfires and stalling continued until I got close enough to hook up a tow strap and bring it into John’s garage. One multimeter test later, I changed out the coil for my spare. The problematic manifold studs proved very stubborn, and I resorted to having the manifold shop-welded to the down pipe and hoping for the best.

We met up with Ryan Lynch in his restored NAS 90, then drove the 180 miles to Gustaf Kupetz’s cabin just north of Duluth, arriving after dusk. I had not seen Gustaf in a long time, so I lured him out for a late night of sipping Aquavit. The next morning, Gustaf’s kids, Oskar (8) and Margaux (6), proved quite adept at throwing stuff in the back of his HiCap 110 300 Tdi. However, night driving revealed a burntout left headlamp on my Rover. As our convoy continued through Duluth, more electrical gremlins revealed themselves. I noticed my charging amps jumping around, hinting at a big electrical short. Inspection of the engine bay revealed

that the J-hook on the bat tery had stripped threads, allowing the battery to slide around in the metal frame. When I hit the brakes hard, the battery would slide for ward and short out. At a local auto parts store, I purchased and installed a new J-hook (and a headlamp); the t-shirt I had received at last July’s National Rally in Ouray, CO, served to help pack the bat tery in place. A necessary sac rifice. We then hit the road again.

On the way into Cornuco pia, WI, the charging light il luminated on my fascia. Normally, this indicates either the lead wire coming off the back of the generator, or a loose belt. This time, the tensioner bracket had broken in two! After locating the pivot bolt hidden in the sand, I removed the fan to get access to the bracket hole. I saw a marina just across the street from our lunch spot; there, I hoped to find a welder. A very affable, capable young man knitted the bracket back together, and we continued on our trek.

Holiday 2022 roversmagazine.com 9

‘‘ ’’

10 roversmagazine.com Holiday 2022
Their ‘66 Series IIA Marshall ambulance has all the comforts and conveniences of home

In Ontonagon Country, MI, we met up with Dave and Mary Allton at a campground. Their ‘66 Series IIA Marshall ambulance has all the comforts and conven iences of home. I took the opportunity to com plete a fluid check; only the right front swivel balls required more gear oil. This day’s travel brought us to a delight ful stretch of beach in Marquette, MI. Camping on the sands with the sounds of waves crash ing was delightful, and I found my Camel Tro phy-style bath in Lake Superior “refreshing.”

[Average water temperature is 40 degrees F -ed.]

Tony Kieffer and his wife, Shauna, and kids, Jack (3) and Annika (7) met up with us on our drive the next day on the way to the Great Lakes Shipwreck Museum and Whitefish Point Lighthouse on Michigan’s Upper Peninsula. John made the dirt road route there more exciting by losing a disk brake pin, which resulted in a brake failure at the right front wheel. Fortunately, he carries spares! The museum provided a pro foundly moving experience, as we took stock of the tragic wrecks – a testament to the power of this lake. We crossed the border into Canada without incident and stopped at the fantastic Agawa (tourist trap) Store. This is a great place for provisions, fuel and hand-made Native mocca sins. We then proceeded to our planned overnight stay at Pancake Bay Provincial Park. It features a three-kilometer beach and crystal clear water at the campground’s edge. The kids could just run. The only in terruption of our reverie came from a park ranger, who informed us of the fines for beer drinking on the beach. He left us with a warning, pro vided that we dumped them out on the spot.

The next day, the rear section of Tony’s 109” exhaust rattled loose. He trimmed a Molson Canadian can to hold things together until we could find a real exhaust holder. A bit more sightseeing brought us to the Lake Superior Provincial Park in Ontario. The prehistoric rock paint ings describe how the Mishupishu horned lynx caused so much havoc in the area. In a Wawa, we were able to fortify ourselves with lunch and buff up Tony’s ex haust with metal and clamps from the nearby Canadian Tire. They really do seem to have everything.

Some calm overnights and gentle swooping hills and valleys at 25–50 mph lead us to the delightful town of Nipigon, ON. Our friend, Phil McGuire, has a farm there where he grows whatever is in season. His son-in-law, Roger, stopped by to say hello. On other trips, Roger has lead us through the Ontario forests to see bears, waterfalls and crystal clear lakes. It was great to catch up.

We continued on to Sleeping Giant Provincial Park. The General Store and Tea Room near the campground has been in place on Silver Islet since 1971, when an underwater silver mine provided local employ ment. The tea room became a lovely setting for a cup of Earl Grey!

Our last night on the Boxy Truck Tour ran quite late. Tony marked the occasion by sharing his “Land Rover Problem Solver” – a bottle of Dewar’s. After a slow start the next day, we crossed the border back into

the USA and continued on to the Minnesota Land Rovers yearly picnic. We had some tales to tell! This year’s picnic took place at the Trestle Inn (yes, it’s really built from abandoned railroad trestles), nestled within the Superior National Forest.

We described our experiences as mellow on us, but the 1,450 miles total took a toll on our stalwart ‘60’s Land Rovers. Thus, this trip ended as most do – ordering more parts from Rovers North. ///

Holiday 2022 roversmagazine.com 11
Canadians manufacture the best beer cans! Keep all spares... Rik Olsen at Lake Superior Provincial Park

A Cl a ss ic

12 roversmagazine.com Holiday 2022

Adventure

Out of the five Land Rovers in our household, I had only two good options for a 6,032-mile adven ture last July: “Sparky,” our ’89 Range Rover Classic, or “Westie,” our ’06 Range Rover L322. The latter, a newer acqui sition, has over 190,000 miles, but I’d driven Range Rover Classics for 25 years and Sparky for five years. With proper preventative maintenance, it had never let me down and thus I anointed it as the adventure vehicle.

The “to do” list before the trip in cluded a leaky power steering system, inoperative air conditioning and some cosmetics. Power washing the engine helped find the source of the leak (and resulted in a soaked distributor amplifier oops) and a decision to swap out a noisy alternator. The air conditioner required that I disassemble the dashboard – not fun, but it was the third time I’d done it. Time was running short for the remaining loose wheel bearing, wheel alignment and air conditioner recharge.

A long time ago, I’d made a sea voyage from Long Island, NY, to Virginia Beach, VA, in a 1938 Vineyard powerboat, and I found myself screwing down the compass in the cockpit as I was leaving the dock. This memory came back to me as I pushed the an alogue clock back into the fascia. Like the boat, Sparky would require fettling on this adventure.

Holiday 2022 roversmagazine.com 13
Story and Photos: Lawrence Michelon Lawrence Michelon

I left Norfolk at night and discovered the dashboard lights would not illuminate and that I’d forgotten to reconnect the dimmer switch. These comprised Fix #1. Meanwhile, the Great Smoky Mountains lived up to their name; the “smoke” hovered over the water as fog rolled down the rivers. Sparky handled “The Tail of the Dragon” quite well, even in corners with speed limits of 15–20 mph.

In Nashville, I rectified two errors: forgetting to pack my sleeping bag and getting a haircut. Fix #2 repaired an inoperative driver’s side door lock. (A shady spot at an REI provided the perfect “shade tree ga rage.”) I also discovered Black Abbey Brewery, with its wide selection of Belgian beers, and rekindled a friendship with 6th-grade friend Scott Peterson and family (Elizabeth, Cooper and Millie). Downtown Nashville reminded me of Bourbon Street during Mardi Gras.

I headed out of Nashville early the next morning, but not long after, I heard a “pop” from the engine as the tachometer needle dropped to 0 and the Range Rover coasted to the side of the road. All levels of disaster ran through my head. Lifting the hood, I expected to see a deluge of fluids, but no – nothing. The engine would crank but not fire up. I began the process of fuel, fire, air (or food, water, shelter, as my daughter Logan says). I checked the spark from the coil by pul ling the wire from the distributor and setting it close to metal. Spark! Crap! Onto fuel – I cracked the line near the fuel rail. It dripped and after turning the key, the drip intensified; thus, the fuel pump worked.

I called more knowledgeable ROAV enthusiasts Ralf Sarek, David Short and Drew Swoboda; Drew asked if I had checked for spark from the distributor – I had not. I pulled a wire from the distributor cap, held it close to the terminal – and nothing. To double-check, I pulled the coil wire from the top of the cap and held it close to the terminal. The result was, err, shocking – don’t do this at home! Meanwhile, David Short contacted friends in Tennessee – no joy – so my host Scott drove two hours to secure a rotor for me. Once installed, the motor fired up and sounded terrific.

With the Range Rover running well, and with the benefit of cooler temperatures, I decided to make up for lost time. I knocked down state after state until I reached Kansas. Why is it so long a drive? I discov ered it may be flat but it’s not level; one border lies at 600 ft, while the other sits at 3,000 ft. Overall, it took me an additional 19 hours and 1,400 miles of driving with only stops for fuel, but I finally made a Walmart parking lot in Colorado Springs at 12:30 am local time.

The next day, over Monarch Pass to Ridgeway, Sparky began to run rough again. When I met up with the Virginians also attending the

14 roversmagazine.com Holiday 2022
Ignition problems sorted and back on the road Background: Looking east toward the Rocky Mountains
Holiday 2022 roversmagazine.com 15

National Rally (Mike Boggs, Ralf Sarek, Bob Steele, Doug Crowther, David Short, Clay Ayers, among others), we turned onto the Million Dollar Highway and Sparky stopped running. Pulling the rotor on and off seemingly revived the Classic; I called Rovers North for another rotor, but it wasn’t until nighttime that I saw sparks emanating from the plug wires. There lay the source of my running issues and burnedout rotors.

My drive west coincided with the Solihull Society’s National Rally, and I enjoyed every moment of my time along Imogene Pass (I never get tired of that one) and Yankee Boy, and enjoyed following pinch-hit ting trail leader Mike Boggs through Ophir Pass. I experienced torrential rains and enormous hailstones, but also stunning sunsets – that’s what my Range Rover Classic made possible.

A Cl a ss ic Adventure

Background L-R: Happy Virginians - Bob and Robbin Steele, Lawrence Michelon and Clay Ayers on top of Cinnamon Pass, CO (Elevation 12,640 ft.)

16 roversmagazine.com Holiday
2022
Above: Alpine lake at the base of Silver Mountain, CO
Holiday 2022 roversmagazine.com 17

A Cl a ss ic Adventure

18 roversmagazine.com Holiday 2022
Always nice to off-road with other enthusiasts

I packed up, said my goodbyes and hit the road toward Price, Provo and Salt Lake City, UT. I enjoyed terrific hikes around Salt Lake City, and continued driving toward Logan, UT (in honor of my daughter, of course) and the Tetons. The next morning, as I drove further up a trail to get closer to those majestic mountains, they really started to show their colors. At Taggart Lake, I witnessed a near picture-perfect reflection of the Tetons in the clear waters. It was mesmerizing. Then, on the way to Colter, a herd of buffalo stopped traffic by sauntering across the road. Man, they are big!

I entered Yellowstone National Park and enjoyed several hikes there. I discovered that Old Faithful is always faithful. Continuing north on the way toward Montana, I found more buffalo – but also discovered that mudslides had blocked both exits from the park in my preferred direction. I guess I had to spend more time in the park! Yellowstone fascinated me with its varied topography. The geysers appear in a valley while the east gate region reminded me of the canyons around Gunnison, CO. Crossing the Montana-Wyoming border, I entered the 2.5 million acre Shoshone National Forest and drove by the 350-ft high Buffalo Bill Dam and Reservoir. The city of Cody, WY, is named after him.

To meet my schedule, I had to leave the off-road trails and nar row roads for the great American highway system. Sparky cruised at 75–80 mph, yet returned 16 mpg on my 17-hour journey to Co manche Campground in South Dakota’s Black Hills National Forest. I took a break to hike the scenic trails in Custer State Park and make the obligatory stop to stare at Mt. Rushmore. I would treat myself to another hike in Minnesota with views from bluffs overlooking the Mississippi River and a “down day” with friends, but eventually, I had to get back home. I knocked back many miles in Wisconsin, Illi nois, Indiana, Ohio, West Virginia and finally, on Sunday, August 7, home at last.

Of my 18 days and 6,032 miles, I spent 4 nights camping, 3 nights sleeping in the back seat, 1 night in an AirBnB and 9 nights with friends and family. I discovered 6 breweries and savored 5 taco meals. I saw the splendor of the Rockies, the majesty of the plains, the mighty Mississippi and endless vistas on stunning hiking trails. Plus, I accomplished all of this in an ’89 Range Rover Classic, my favorite Land Rover. ///

Holiday 2022 roversmagazine.com 19
20 roversmagazine.com Holiday 2022

Maine Misfits Rover Bits And

M

any New England Land Rover enthusiasts have come to recognize John Vallerand and his stash of used Rover parts. He’s very hard to miss with his ZZ Top-length beard and heavy Maine accent. He attends many of the oldschool British auto events such as the All Metal Dash and British Invasion to promote his treasures.

For the past three years, John has kicked around the idea of hosting a Land Rover event at his 200-acre property in Greene, ME. Near his house lies a graveyard of old Land Rovers, ranging from Series I’s to Range Rover Classics. John has no social media presence, so spreading the word would rely solely on his phone contact list. When I offered to help publicize it through Instagram and FaceBook, I told him he should create a catchy name for the event. He immediately fired back with “Maine Misfits & Rover Bits.” I told him it was too long and didn’t really flow. He replied, “I’m from Maine. I don’t belong to any group and I have a bunch of Rover bits to sell.”

With that statement of stubbornness, the debate ended.

Holiday 2022 roversmagazine.com 21
Story by Dave Sweetapple, Photos by Dave Sweetapple and Lou Sapienza

John set the dates of August 19–21 for Maine Misfits & Rover Bits. We invited every model of Land Rover. We promised 200 acres of trails, rustic camping (with the option of hotels in neighboring Lewiston), campfires, a Saturday dinner and access to Rover parts from the “boneyard” as well as those stored inside the barn. John ordered a couple of porta-potties, set up a potable water station and purchased eighty pounds of chicken breast and two large beef briskets. The weekend prior to the event, John and his son Vince, along with their friend Heidi, went out into the woods to clear a few overgrown trails. They also nailed up large arrow signs to direct traffic where the trails didn’t offer an obvious path.

By midday on Friday, the 19th, the Land Rovers began to roll in with attendees staking claims to the best camping spots. The sites spread out from John’s lawn to the side of his barn, to those nestled in the forest, set back from the rows of Land Rovers. Luckily the forecast called for hot and sunny weather, the best possible camping conditions. Some campers had full cooking set-ups with planned menus; for example, Mike Kenney and his famous deep-fried donuts with chocolate covering. While many brought their own campfire coffee apparatuses, John generously served endless cups of coffee and pastry from his wrap-around porch, so those who didn’t bring coffee gear had no worries.

Throughout the three days, we counted a total of 102 Land Rovers that rolled onto the property, including Mark Letorney’s Defender. (It would have been 103 but our Editor, Jeff Aronson, showed up in his Triumph TR7, whining about “ferry problems.” Harumpf!) Some came for a short visit while others spent the entire weekend at John’s place. By the time breakfast was finished on Sunday, there were approximately 30 Land Rovers still there, mostly people who had camped out.

Maine Misfits had all the components of a classic Land Rover gathering. It was a chance for old friends to catch up, meet new comers and deepen connections with those who only knew each other from afar. The event brought vehicles from all over New England and the Northeast.

The “wheeling” element of the gathering was incredible. The trails provided numerous challenges with many levels of difficulty. The trails ranged from barely beaten paths to green lanes and boasted rock

22 roversmagazine.com Holiday 2022

ledges, mud ruts and water crossings. All weekend long, groups of 3–10 Land Rovers would leave the main staging area and head down one of several paths to hit the trails. Those that started out with light mud on Friday became churned up into full-blown mud ruts by Sunday. Before leaving for home on the final day, my wife Robin and I foolishly went out for one last solo run in my Series III. Once we reached the far end of the property, my Land Rover sank to its axles in the thick mud. What would have been a 15-minute run took us an hour to free ourselves and make our way back to camp.

My favorite part of the event was the “night wheeling.” At sun set on both Friday and Saturday, small groups headed out to explore the woods. When it’s dark, the trails offer a whole new set of chal lenges. You are unable to see some of the ruts, obstacles and routes that lie ahead. Luckily, Vince Vallerand led our group, as he knows the property very well. Don Jenks completely bogged down in a swampy patch; with no nearby tree to hook onto, he attached a tow strap to the vehicle ahead of him. With a quick lunge forward, that truck thrust sideways and ended up on a stump. Jesse Ackerman then left the front of the group in his modified ‘03 Discovery II to circle back and pull the Rovers backwards to hard ground. These night runs had us out for 3–4 hours, mostly recovering each other.

Years ago, Vince had aptly named one of the sections, “The Money Pit” due to breakage of axles and smashing of body parts. It’s basically a swamp with trees growing up through it. On Saturday night we entered this area, which led to eight of the ten Land Rovers being submerged up to their sills in the thickest mud I have ever seen. Vince made it through on his monster truck and aided in the recovery of each subsequent vehicle. The only other one that made it through unscathed was Forrest Clifton in his highly modified Defender 110.

Holiday 2022 roversmagazine.com 23

The Maine Misfits feast took place on Saturday evening. John wheeled out his massive custom grill midday; it is so large that he was able to cook all 80 pounds of chicken breasts at once. Perplexed by how to keep the grill’s thirty pound cover open, John modified it by installing a Series bonnet hinge to prop it up. Next to the jumbo grill, Kevin Gagnon manned a large meat smoker with two lean beef briskets that had been cooking for two days. Add to this, fresh corn on the cob, coleslaw, salads and a plethora of desserts, and your have a feast fit for any Rover king.

Following the dinner came a short awards ceremony; well, I should say “award” in the singular. Gavin Warren of Red Rover Parts took an old Series IIA ring gear (crown wheel), powder coated it, and engraved the Maine Misfits logo on it. The award went to the at tendee with the most damage done to his/her vehicle. Tommy Blair grinned as he accepted the award. The day before, Tommy had taken his [mid-90s Range Rover Classic] up over the rock ledge section

called “Tree Hugger.” The Range Rover tilted sideways, came down over the ledge and rested against a tree that leaned toward the rock. That buckled the whole roof section above the rear passenger win dow, smashing the glass as well. Shortly afterwards, he tried it going in the opposite direction and the exact same thing happened to the driver’s side rear window and roof section.

Maine Misfits was truly one of the most entertaining events I’ve been to in a while. It had all the components that make a great Land Rover event: good food, good trails, good friends. It brought to gether people that I’d normally not see in the middle of summer. I’m really looking forward to next year’s “Second Annual – Maine Misfits & Rover Bits” event. No dates have been set at this time, but it will most likely be mid-August. Hope to see you there! ///

Holiday 2022 roversmagazine.com 25
26 roversmagazine.com Holiday 2022

The Art of Driving Slowly

As a kid in rural New Zealand during the 1970s, I saw Land Rover Series vehicles on farms everywhere, from Bluff to Cape Reinga. Bouncing around in the back of my uncle’s 109” became the highlight of my visits to his farm. One day during the lambing season, he asked me to drive –my legs barely long enough to push in the clutch. He taught me to go, stop and steer well enough to follow him and the dogs while they herded the sheep. We named the Land Rover the “Jolly Green Giant.” Clearly more than just a car, it had a unique personality with which I bonded like no other vehicle. It served as a channel marker in my life, when I took that major step from passenger to driver. It left an indelible mark.

As a 20-something, my mates and I started an adventure travel company, the Oz and Kiwi Experience. We turned to Defender 110s for everything from airport shuttles to overlanders. Nothing – and I mean nothing – screamed exploration and independence to our tens of thou sands of customers like a Land Rover.

Land Rovers continued their pivotal role in my life. I picked up my newborn kids up in a new ’98 Range Rover P38, towed our boat with our ’95 Defender 110, explored America in my ‘05 Range Rover L322 and re cently, enjoyed head-turn ing cruises in a restored ’95 Range Rover Classic. When the summer of 2022 pre sented me with a monthlong work break, I took the plunge and sourced a lovely one-owner, ‘94 Defender 90 in Italy. I had always coveted one and I named her Rosie, an homage to her Portofino Red paint.

Within days of wiring money to the owner, I landed in Venice and took the train to Bassano Del Grappa where she sat patiently waiting for me. The seller had checked all the fluids and prepared her for a drive-about. Along with the keys, he handed me a folder with the title and maintenance receipts. As I climbed in and fired up the 200 Tdi, I beamed from ear to ear. What had been a grand idea a few weeks ago was now a reality!

The cobbled streets of the second-century town bounced us around, and the locals who knew her instinctively waved, then looked surprised not to see her previous owner behind the wheel. I had devel oped a simple but brilliant plan, “Go north, and see what happens.” We joined a motorway which wound through the Dolomites. As I shifted through the gears, “air conditioning” on full blast (both windows down and the sunroof open) to combat the heatwave gripping Europe, I dis covered it took over 40 seconds to accelerate to the estimated top speed of 110 kph. A speed demon Rosie was not, and she worked harder than

Holiday 2022 roversmagazine.com 27
Opposite page: Edolo, a town in the Italian Alps Sitges coast, Catalunya, Spain
‘‘ ’’
A speed demon Rosie was not, and she worked harder than a one-legged tap dancer to get up through the mountain passes
An Italian pairing—Dolomites and Portofino red

a one-legged tap dancer to get up through the mountain passes. As an unabashed gearhead with a stable full of high-performance vehicles, my anxiety levels rose as every car, truck, and even the local vicar on his electric bike passed me.

“Oh my God, what have I got myself into?” I thought, as Rosie struggled on. The heat rose, as did my anxiety and perspiration. The lack of speed and my status as a mobile hazard stressed me out. I needed to stop and recalibrate. After a bowl of pasta and a glass or two of red, I was ready to hit the road again, destination Levico Terme, a lovely town in the Dolomites famous for its health-restoring natural springs. As we joined the motorway with reduced expectations of get ting anywhere quickly, Rosie quickly rewarded me for my newfound patience.

The open windows provided a sublime sensory overload. The warm air caressed my skin and tussled my hair; it brought with it the alpine smells of forests, temperature variations from forest to farmland and even a slight chill as we crisscrossed streams and rivers. My slower speeds meant I could look around, soak in the incredible scenery and even take my eyes off the road for a moment without fear of sending us into the back of a lorry. Cruising along at 80 kph, I found myself on a road that beckoned me with many more, welcome life changes.

The following day, we headed west through the Italian Alps to Lake Como. The air was much cooler at altitude. Thick forests gave way to large swaths of open farmland, vineyards and fields of sunflowers. As Rosie and I had determined we were in no hurry, I altered the Google Maps settings to avoid highways, sending us “off-piste” through the backroads and villages of the Italian Alps. On these backroads, we felt at home. We became part of the agricultural and unhurried lifestyle of rural Italy. I had felt like a road hazard on the highways; on these twisty narrow roads, with speed limits ranging from 30 to 80 kph, we became part of the scenery. Instead of flashing lights, we were greeted with smiles and waves.

An important recognition became apparent as I settled into Rosie’s casual cadence. Stopping would not dramatically impact my day – so stop we did. At sites of spectacular beauty, of which there are too many to count, we would pull over and take it all in. If I felt like taking a cof fee or replenishing Rosie’s diesel reserve, we did so at a local café or bar, or at a gas station, where inevitably an aging uniformed gentleman would happily assist with the process, communicating as best we could with smiles and a laugh.

Over the next few days, as we drove the Alps, then the shores of Lake Como, though wine country to the legendary town of Monza and into Genoa, Rosie taught me a valuable and timely lesson in life. This my friends, is what she whispered in my ear beneath the clattering of tappets:

“Graeme, you’re going to get to where you need to go; let’s enjoy the journey as much the destination.”

By Genoa I’d become a convert. Getting behind the wheel induced an immediate, Zen-like response and all my worries washed away. But to be fair, I didn’t know Rosie that well and I wanted to make sure she remained healthy, so I decided to visit the temple of all things Defender, home of legendary mechanic Maurizio Ferrando of Tecnomeccanica Sport.

28 roversmagazine.com Holiday 2022
Above: Levico Terme, Italy Above: Lake Como, Italy

Maurizio has wrenched on racing cars, restored everything from the ‘70s Velar Range Rover prototype to every model of De fender. I knew this kindred spirit would be just the man to give Rosie a going over following our 1000+ km shakedown, and instill a sense of confidence in me.

Maurizio greeted me like a long-lost friend; the kinship of Land Rover owners runs deep with genuine respect for one another. He inspected Rosie, giving her the thumbs up, complimenting her solid frame and drivetrain. While waiting for an oil filter to arrive, we walked around his village, sipped coffee and chatted to his neighbors at a café. Following a full fluid change and lubrication, Rosie and I hit the road again and contemplated where to go next.

While sipping a late afternoon, beachside prosecco, I noticed huge ferries heading in and out of the Genoa port. I discovered their destina tions would be Sardinia and onto Barcelona, where I had a series of work meetings. This new plan went into immediate effect, and the following day Rosie and I boarded a ferry to Porto Torres.

Our layover in Sardinia provided the glimpse I needed to fuel a desire to return. Here I found quaint historic villages, incredible scenery and crystal-clear waters in vivid shades of blue. The hotels and restau rants offered tremendous values, more so than the mainland, and the locals welcomed visitors with genuine delight.

An early morning start found us loaded aboard the next ferry to Barcelona. Fourteen hours later, after a peaceful crossing, Rosie stood

out as we made our way through the narrow streets and lanes, garner ing warm smiles and waves of approval from tourists and locals alike. After completing our mandatory work tasks, we took the back roads to Monserrat, through the beautiful mountain principality of Andorra, and meandered along the Pyrenees, west through France, to Biarritz.

We arrived during the Fêtes de Bayonne festival, which meant that most towns and villages in the area were filled with Basques clad in traditional white, with red scarves and waist bands. From Biarritz we crossed back into Spain, stopping in San Sebastian and the historic and beautiful city of Bilbao. The drive to Santander provided vistas of hill side vineyards, lush forests of soaring trees in brilliant hues of green.

I wanted to take Rosie to Solihull, her ancestral home, so we boarded a Brittany Lines ferry for a 28-hour crossing to Portsmouth. Once there, we made our way, slowly of course, through the British countryside where – except for her left-hand drive – she blended in perfectly. We paused at Stonehenge and joined hundreds of others, baffled by how these massive stones were assembled, before the last push to the British Motor Museum at Gaydon, where Rosie’s royal rel atives were on fine display. These included the Queen and Queen Mother’s fleet of Land Rovers from a Series 1 to a 110 Defender and several custom Range Rovers. Rosie’s excitement was visible from the oil spots she left on this hallowed turf.

We completed her pilgrimage home by traversing the final 25 miles to the gates of the Land Rover factory, a tribute to the site of Rosie’s birthplace. Having made this pilgrimage, she would continue her adven tures with me in the USA, joining my ’95 Range Rover Classic and an ’05 Range Rover HSE.

Over a few thousand kilometers and four weeks, Rosie taught me something I had not known, but now appreciate beyond words: the art of driving slowly. ///

Above: Fitting end to a beautiful trip, Hellidon, UK

Holiday 2022 roversmagazine.com 29
Above: Genoa, Italy Above: Santander, Spain Maurizio Ferrando
30 roversmagazine.com Holiday 2022

Wet N’ Wild

The 2022 Solihull Society National Rally

For the last six years, I’ve served on the planning commission of the Solihull Society’s National Rally, which included working with Arizona Land Rover on the 2021 Great American Rover Rally. It started with a passion for my Land Rovers and has leaked (pun intended) into the joy of seeing others share that enthusiasm –on the trails and off.

The Land Rover National Rally (LRNR) takes place in various mountainous places in Colorado on even-numbered years, and in Moab, UT, well, because it’s Moab, on the odd years. This past July’s locale was Ouray, CO, known as the “Switzerland of the Rockies.”

However, my husband Jake and I tested positive for Covid-19 –the day before we were set to leave to set up camp. I can just hear Alanis Morrisette singing “Isn’t it Ironic” in the background as I write. Not ironic (as nothing is in the song) but the worst timing I could have had since the start of the pandemic! 2022 became the first year since I’ve been a Rover fangirl that I could not participate, let alone volunteer.

Although I did not experience the excitement first-hand, friends who attended the rally shared their stories of the mudslides, extreme wet weather and all-around fun. Each answered the same questions during my interviews.

Holiday 2022 roversmagazine.com 31

L-R: ex-MoD Series III ready for the trails; Drivers safety meeting before heading off into Colorado’s highelevation passes

TL: How did this year compare to other rallies you've attended?

TC: I’ve been attending LRNRs since 1995, which was held in Red River, NM. I will tell you I have enjoyed every one of them. Each event seems to stand out for one reason or another. Some years it's a new friend, others it's a particularly interesting trail and other years, it’s a low-key event. Because of those three things, I have missed very few rallies over the years. John Wood’s Distillery is a highlight for me whenever I’m in Ouray!

TL: What was it like to be a Trail Leader?

TC: This year, I led Ophir Pass, Alta Lakes and Last Dollar on Day One. Then I led Yankee Boy Basin, and by Friday, participants were looking for something scenic (haha), so Andy Snow and I took a group up to Clear Lake – very scenic and highly recommended.

One of the people in our group was a young woman in her new Discovery 5. It had no transfer case, lockers or aggressive tires but it was unstoppable. Oh, and a Bond Edition was there too. There’s something special about that V8 rumble!

TL: I heard the weather was... interesting?

TC: I’ve enjoyed rally weather of all types, but this year gave us some thing new: mudslides. In both instances we snuck out in the nick of time, so I just saw the images. We had very high winds that day. I led

32 roversmagazine.com Holiday 2022
Tom Cryer, Denver, CO, 2012 LR4 L-R: William, Wesley and Tom Cryer

the group from Tellu ride on Last Dollar; by the time I arrived back at the campground, one of my tent fly mullions had snapped in two.

TL: How did your Land Rover hold up?

TC: As for the rig, no lights until I arrived back in Denver. I had taken it through the car wash, but by the other end of the (Eisenhower) Tunnel, no lights! The Land Rover Whisperer has always been there for me.

Handlovitch, Denver, CO, 2011 LR4

MH: As Colorado natives, we’d never been to that part of the state before. We found the scenery stunning and we look forward to get ting back down there. I’ve attended several LRNRs dating back to the late ‘90s – Crested Butte, Breckenridge, Leadville and Moab – and this seemed pretty similar. Unlike Moab, the trails in Ouray are not as challenging, which meant no real breakage!

MH: I led day-long trails at Minni Gulch, Maggi Gulch, Eureka Gulch, Ophir Pass, Alta Lakes, Gold King and Black Bear Pass.

We stayed in Ridgeway at the Ridgeway Lodge and Star Saloon. It was close enough to Ouray and Telluride for us to head in each di rection on Thursday to explore the two towns.

As for the weather, it was the monsoon season and according to the locals, it hadn’t rained as much as it did in quite some time. Nev ertheless, the weather didn't affect our experience at all. On Tuesday, we were stopped by a mudslide for about two hours on Highway 550 on our way back to town after running trails, but we just stood out in the rain, talked about the day, had a few laughs and watched the highway crews do their thing!

All in all it was a great rally and we had a wonderful time!

Holiday 2022 roversmagazine.com 33
Mark

TN: The last time we were in Ouray in 2019, some of the trails were closed due to snow. This year we did Imogene Pass, Ophir Pass, Alta Lakes, Corkscrew Gulch and Black Bear Pass. Black Bear was the trail I was most excited about, since I had only done this once in 2013. The views were stunning and the switchbacks very, very tight, but no problem for the turning radius of an LR3.

Although the weather was rainy and our tent had a very small leak appear mid-week, all was well at the KOA where we camped near other Land Rover owners from multiple states. Three Minne sota Land Rover members attended this year: Rik Olsen in his Bond Edition Defender, our friend Adam in “Disco Dave,” his Discovery II, and ourselves.

The LR3 had some overheating issues heading West past Den ver up the mountain highways. As usual, when the temp gauge started moving up, I turned off the A/C and cranked up the heat to give some extra cooling to the system. The last time I did it, no heat came out – uh oh! My coolant had pushed out of the system and I needed Dexcool. None was available at a nearby gas station. We drove on to the next town, but the gas station there only had the green stuff. We had made it to the tiny town of Sargents, a place with no cell service but with WiFi. I could make a WiFi call (gotta love technology) to Rob Quaife, who just happened to be on the other side of a nearby mountain pass. Twenty minutes later, he and his wife Deb arrived. They drove me 30 minutes to the next town, where I bought more Dexcool, and returned me safely to my LR3.

TN: Even though it rained daily until the last day, we didn’t have too much trouble on the trails. Imogene Pass got a little sketchy with some traffic jams on the narrow, single-track lanes, but we managed to get off the trail. Valerie and I did Corkscrew Gulch ourselves on Thursday; low visibility meant we were driving in the clouds!

The Bon Ton (old school Italian restaurant) in Ouray has some incredibly great food where we enjoyed a meal with Dr. Rob and his wife. We also hit the excellent Ouray Brewery with our Chicago friends Ian and Marianne Rogenski who we met in 2013 – ah, the circle of Rover life.

Overall, things were good with the organization of the rally, which I understand had been hit with the absence of personnel due to illness, business and just about every other thing that could go wrong. The Solihull Society members banded together quite well and pulled off another successful rally!

and

Weitz, Colorado Springs CO, 2016 LR4

DW: We had a great time, since this was our second Land Rover rally. Over the winter, we kept in touch with several folks whom we met last year in Moab, so it was great to see them and run trails with “old friends.”

Even though it rained almost every day, we didn’t mind since we were in the luxurious

34 roversmagazine.com Holiday 2022
Todd and Valerie Nelson, Minneapolis, MN, 2009 LR3 Dave Lesa

cabin of our LR4. Had it been a motorcycle or mountain bike rally, that would’ve been another story. We were lucky not to get caught in any mudslides, but we know of several who did, several times. We’ll take rain over forest fires any day, month or year.

I’ve been adventure motorcycling since 2014, so I’ve ridden most of the trails and high alpine passes around Ouray, but never in any 4x4. We wheeled California, Hurricane, Cinnamon and some of the more exciting passes such as Imogine, Ophir, Black Bear, Engineer and Min eral Creek.

Ouray is always one of our favorite destinations. Incredible views, people enjoying the outdoors in various ways and, of course, the hot springs. The Cocktail Party at K J Wood’s Distillers was very fun with a great atmosphere. It was cool to hear how John Wood was involved with Solihull Society in the past and how his son is now getting into the sport.

It wouldn’t be a Land Rover rally if we didn’t have a mechanical issue, right? Mineral Creek was the most challenging trail we ran this rally. My LR4 performed well; however, with all the rain making the rock

features wet & slippery, I managed to take a strange line & wigged out one of my height sensors, dropping it down to the bump stops. Mineral Creek is too rocky to drive out on the bump stops, but luckily, I’d brought a GAP Diagnostic IID tool and was able to raise it back up and make it to Lake City.

The people I interviewed were friends I’ve made over the years wheeling at events. Listening to their stories, it struck me that – like me – they happened to drive LR3s and LR4s. These newer vehicles, including a Discovery 5 and new Defenders, dominated this year’s numbers. Only one Series Land Rover came to the event, but without a roof and under the torrential rains, they left on the second day!

Each year, I’ve looked forward to the Land Rover National Rally from the day the previous one ends. If you’re like me, you’ll register for Moab in 2023 as soon as it opens in January, 2023, at the Soli hull Society.org website. Hope to see you there! ///

Holiday 2022 roversmagazine.com 35
Background: Poughkeepsie Gulch

Land Rover Peabody, MA

Land Rover Peabody services Massachusetts’ “North Shore,” one of four Land Rover dealers in the state. This year’s team included Steven Em (Service Advisor), Eric Guenard (Sales) and Harrison Preston (Service Tech).

Harrison Preston summarized the event as, “Awesome!

We had to come to gether through diffi cult challenges, and we did. I also love the competition aspect. We chose to not have a captain; we worked together to figure out our individual skills. My favorite challenge was the Defender forward pull using only winch line – but no winch! Taking compass bearings at the top of the hillside was the hardest. And the weather – it poured during our wave and I wound up in a mud puddle.”

Steven Em said, “I didn’t know really what to expect. I wasn’t ready for the obstacle course. TReK was challenging physically and mentally. As we drove from Mahwah to Vermont, we agreed that any decision would be made on a majority vote. We might bicker, but we agreed to go with the vote. We played to each other’s strengths. I also learned more about my teammates.” His favorite challenges? “Using the hi-lift as a come-along. Also, the spare tire carry in the woods as we prevented each other from falling on the slippery trails.”

Eric Guenard: “I’ve been at Land Rover Peabody for 11 years – daily, I see all the displays about TReK on our walls. When no one on the sales team wanted to go, I said, ‘Hell, Yah!’ All of the competition and outdoor activities appealed to me. For me, the reverse trials course drive was pretty tough. The best one for me was the relay race that morning. I’m not a runner, but I came in first. That was special for me because I’m never first! I do CrossFit, and I thought I was in good shape, but I could not run up the distance of that hill. To my chagrin, I ended up walking the last part.” ///

‘‘

This is what happens when you let a mountain man loose,” said a member of the Land Rover Driving Team at the 2022 TreK competition. After dragging myself out of my tent at 6:00 am for a second full day of competitive off-roading, physical fitness tests and problem solving with my team, I nodded in agreement. Sean Gorman, the mountain man in question, took the lead in creating the challenges for this year’s TReK. His laconic voice masked the difficulties presented by the maniacal tasks that had Land Rover teams panting from fatigue, stressing over timed decisions made in the field and learning of the hidden capabilities of their new De fender 110s. Sean had sharpened his talents at the 2021 Land Rover

36 roversmagazine.com Holiday 2022
L-R: Harrison Preston, Steven Em, Eric Guenard
2022
Story: Jeffrey Aronson, Photos: Land Rover Media

Trophy event [see the Winter 2022 issue -ed]. His crew of taskmasters from the Land Rover Driving Team and Land Rover Experience Man chester included Warren Blevins, Fred Monsees, Jamie Cote, Chris Tefke, Ben Wooten, Chrystyna Young, David Nunn, Geoff Myles, Jim Swett, Travis Martin, Charlie Garitty and Lorraine McKiniry.

TReK became a marque identity event in 1996, the brainchild of Bob Burns and Tom Collins, the creators of Land Rover’s special events. Burns intended TReK to emulate a “Camel Trophy Lite” that would create “product zealots” of the often-isolated sales, service, parts and administrative staff at Land Rover dealerships. Then-CEO Charlies Hughes gave it the go-ahead.

This year’s competition brought together 100 three-person teams (90 from the U.S. and 10 from Canada). The teams competed in identi cally kitted-out 2023 Land Rover Defender 110s. The winning team from each wave of competition will return to Manchester for the TReK 2022 Finals, and the crowning of the overall winner as we go to press.

Holiday 2022 roversmagazine.com 37

Four limited editions of the 2022 Defender.

(Above) Bond 007 for 60 years of James Bond films

(Right) Defender 90 Trophy, 1 of 220 (Below) Grasmere Green 90 & 110 75th Anniversary Edition with P400 MHEV engine.

Defender 90, 110 75th Anniversary Edition

2022

“We are thrilled to bring back the TReK competition for another year, putting the Defender’s capabilities and our retailers’ skills to the test,” said Joe Eberhardt, President and CEO, Jaguar Land Rover North America.

Land Rover created a 5-team, 15-person media weekend that replicated the same onerous tasks re quired of the dealer teams. Sinuhe Xavier, a Colorado-based director, producer and Discovery enthusiast, and Chris Van Leuven, a Yosemitebased journalist and rock climber, got saddled with me.

38 roversmagazine.com Holiday 2022 007 Bond Edition Defender

Our shared challenges included orienteering after racing up a 200-ft grassy knoll, running an obstacle course, using a hi-lift jack as a comealong to pull a Defender sideways (we actually pulled so hard we jammed it!), timed runs through wood trails, off-road driving, a Time/Distance on-road rally, creating enticing meals on camp stoves, rolling a TReK Discovery using plastic pipes and muscle power – and much more. Every event had a time limit, and the tasks fell one upon another, making for long days and nights.

Despite the aches and pains, the crammed schedule and the long drive from New Jersey to Vermont, our delight with the TReK mir rored that of the New England teams interviewed here. Thanks to JLR for demonstrating what life can mean through a Land Rover! ///

Land Rover Scarborough, ME

This year, Maine’s sole Jaguar Land Rover dealer, Land Rover Scarbor ough, purchased a TreK Defender and created a team comprised of veteran TReK competitor Justin Alley (Parts Manager), Ron McIntyre (General Sales Manager) and Pete Warren (Service Tech).

Ron McIntyre had several reasons to enjoy his first TReK. “We don’t get to work together a lot, but by Day 2, we were all on the same page as a team. Also, at 58 years old, I’ve been getting in shape. I’m not a spring chicken, so I was surprised by the physicality of it all. We did pretty good as a team while having a lot of fun.”

Justin Alley said, “it was great to get to know the guys better. Lots of driving between New Jersey, Vermont and Maine. We spent time in stressful situations. My favorite was the fly fishing. The one we did the best on was the Defender pull using only the winch rope, and the cone challenge. I’ve never been a runner – the starting obstacle course was the toughest.”

Pete Warren: “I’ve been here for 16 ½ years. I work with Ron and Justin individually, but I didn’t know how we would work as a team. You can’t just have one person – everyone must work together. I had a blast. I was not a fan of the relay runs. Personally, as a tech, the tire change was really easy for me. The cone driving challenge was the most inter esting as a team, and the high lift jack was the most challenging.” ///

Land Rover Bedford, NH

The only dealer in the state sent a team for the second year to TReK. Veterans Noah Sanders and Jim Chafe were joined by Randy Schneider heinz for this year’s competition. (As we go to press, they are competing in the final wave.)

Derek Butts, the Center Manager, said, “The TReK competition holds tremendous value for our organization. First, it encapsulates the ethos of Land Rover by utilizing the capability of the vehicles over challenging terrain. Second, the event builds enthusiasm throughout our entire deal ership as our team members support the performance of the three indi viduals competing in TReK. Lastly, it broadcasts to the community that we ‘get it’ – that we fully understanding what these vehicles are capable of accomplishing. Overall, this event pays dividends well beyond the measured expense of participating.” ///

Holiday 2022 roversmagazine.com 39

It Started With A Badge

Irecently saw the “Rover Diesel” badge advertised on Rovers North’s website – a part that I have been in search of for some time. After buying and installing the badge on my 90, I renewed my inter est in the history of the Land Rover diesel engines.

Diesel engine design makes the most efficient use of fuel. Initially, the fuel is injected at the end of the compression stroke, and the high temperature caused by this compression ignites the fuel. Inventor Rudolf Diesel theorized that higher compression would lead to higher efficiency and more power. He turned out to be right – a gasoline engine compresses at a ratio of between 8:1 to 12:1, while a diesel engine compresses at a ratio of 14:1 to as high as 25:1.

In 1954, Rover Cars Managing Director Spencer Wilks brought in Allan Botwood as the company’s first Sales Director, and Botwood seems to have seized on the idea of a diesel engine option as a way of increasing Land Rover sales. Rover’s engineers first looked at the Stan dard 2.1 litre engine for the Land Rover, but it would not fit into the engine bay. It was probably at this point that Maurice Wilks gave his Chief Engine Designer, Jack Swaine, the job of drawing up a new diesel engine for the Land Rover.

This task presented a whole host of problems. Rover had never designed a diesel engine before and the company had no expertise on board. The rapid expansion of Land Rover production gobbled up all the spare factory space. Embarking on the design and production of a brand-new diesel engine was not a step Rover could take lightly. However, in 1955, the termination of a Ministry of Supply contract to build tank engines freed up space at the Rover’s Acocks Green plant.

Equally important, Wilks and Swaine devised a strategy which involved designing the new diesel engine in tandem with a new petrol engine. A common engine design would enable the manufacture of both engines on the same tooling and they could share components in common. Swaine received outside assistance from Ricardo Engineering for the combustion chamber design, but the basic architecture remained Swaine’s: pushrod-operated overhead valves through a chain-driven camshaft. Both petrol and diesel engines would have a three-bearing crankshaft and roller cam followers. The petrol engine would have a single carburettor, and the diesel would have Pintaux-type injection nozzles along with a mechanically governed CAV injection pump.

To guard against problems of premature bore wear, Swaine made sure the diesel would have adequate cooling by using a “wet-liner” design, where the bores had removable liners (for ease of replacement) which had coolant circulating all round their outsides. The petrol engine

would not need such protective measures, and by omitting the liners, it benefited from larger-diameter pistons which would give the engine better performance. The diesel engine had a swept volume of 2052cc while the petrol would have 2286cc.

Rover also sought to share transmission components between the two engine types. By 1956, it had become clear that the new OHV engines were an extremely tight fit; at times the front axle could foul the sump and the cooling fan could hit the radiator. The simplest way around this was to stretch out the wheelbase. Thus, the 86” Series I became the 88” and the 107 became the 109”. The first diesel-powered Land Rover arrived in 1957 to adverts touting “The News You’ve Been Waiting For” – at a 100 pound sterling premium!

2 Litre Diesel Engine, 1957-1961

In addition to high decibel levels, the first Land Rover diesels suffered from cracked cylinder heads. They did not accelerate as quickly as their petrol counterparts (87 lb ft of torque vs. 124 lb ft petrol engine). The presumed fuel economy improvement never happened, either.

Dimensions: 2052cc, 85.7mm bore x 88.9mm stroke Compression ratio: 22.5:1

Fuel system: Indirect injection with CAV pump Power/Torque: 51 bhp at 3500 rpm 87 lb at 2000rpm

40 roversmagazine.com Holiday 2022
1957 Land Rover 2 Litre Diesel Engine 16-page brochure

2.25 Litre Diesel Engine, 1961-1980

With the introduction of the Series IIA in October, 1961, a more powerful 2.25-litre engine replaced the original 2-litre. This had the same bore and stroke dimensions as the contemporary four-cylinder petrol engine and, unlike the original 2-litre diesel, did not have “wet” cylinder liners. It once again had three main bearings, with the cylinder blocks painted Light Admiralty Grey.

Like the 2.25-litre petrol engine, the “two-and-a-quarter” diesel earned a reputation for longevity and reliability, although – once again – fuel economy and road performance were not among its strengths. Its use continued throughout Series IIA production, including the Forward Control IIA and IIB, extending into the first 9 years of Series III production.

Note: early engine ratings used the generous UK SAE standards. Later engine ratings used the stricter DIN 70020 standards, thus giving the appearance that they had been de-tuned.

Dimensions: 2286cc, 90.47mm bore x 88.9mm stroke Compression ratio: 23:1

Fuel system: Indirect injection with CAV pump Power and torque: 62 bhp SAE at 4000rpm (56.2bhp DIN at 4000rpm) 103 lb SAE at 1800rpm (101 lb DIN at 1800rpm)

[NOTE: Years of production vary due to export market, MoD and fleet sales requirements. -ed.]

Holiday 2022 roversmagazine.com 41
42 roversmagazine.com Holiday 2022
Above top left: 1982 Land Rover HCPU 4-page brochure

2.3 Litre Diesel Engine, 1980-1984

Like the petrol engine, the four-cylinder diesel received a five-bearing crankshaft for the 1981 model year. It appeared in August, 1980, for the 88-inch Series III models and became available in 109-inch types that November.

This engine continued throughout the final Series III models and in the first One Tens. As with the five-bearing petrol engines, the Terra Cotta Red-painted block helped with identification. Land Rover gen erally referred to it as the 2.3-litre diesel engine although, like its petrol equivalent, it retained the original 2286cc swept volume.

Dimensions: 2286cc, 90.47mm bore x 88.9mm stroke Compression ratio: 23:1

Fuel system: Indirect injection with CAV pump Power and torque: 56.2 bhp at 4000rpm (Series III engines) or 60bhp at 4000rpm (One Ten engines) 101 lb at 1800rpm (Series III engines) or 130 lb at 1800rpm (One Ten engines)

2.5 Litre Diesel Engine, 1984-1992

This next stage in the evolution stretched the motor to 2.5 litres, with a longer stroke that added 7 bhp, but with less torque. On these en gines, a belt drive for the camshaft replaced the chain drive.

The revised engine arrived in January, 1984, for the One Ten models, and in June for the Ninety models. In most markets, the 200 Tdi turbocharged engine replaced it but the naturally-aspirated 2.5 diesel remained available for another couple of years in the newly re named Defender models (largely to fulfill fleet orders, military contracts and some overseas market preferences).

Dimensions: 2495cc, 90.47mm bore x 97mm stroke Compression ratio: 21:1

Fuel system: Indirect injection with DPS pump Power and torque: 67 bhp at 4000rpm 114 lb at 1800rpm

Opposite page right column and this page: 1982 Land Rover 14-page brochure, featuring the 2.3 Litre diesel

Holiday 2022 roversmagazine.com 43

Above: 1989 Land Rover County brochure cover, featuring the 2.5 Litre Turbo diesel engine.

2.5 Litre Turbo Diesel engine, 1986-90 (Falcon)

A further evolution of the 2.5 NAD Engine increased the torque power to better compete in the mid ‘80s 4x4 competition. The ad dition of Nimonic exhaust valves, Teflon-coated pistons, oil jets for the crankshaft journal, an 8-blade viscous fan and integrated oil cooler in the radiator helped the 2.5 withstand the extra stresses and higher temperatures that came with the Garrett Turbo charger. After its introduction, the sales of Land Rover 90 & 110 were boosted (pun intended), as it proved more fuel efficient and powerful than its predecessor. An early issue – oil sucked into the air cleaner via the breather system – caused catastrophic fai lures, but a new breather eliminated that problem.

Dimensions: 2495cc, 9047mm bore x 97mm stroke

Compression Ratio: 21.0:1

Power and Torque: 85 hp at 4250 rpm 150 lbs at 1800 rpm

Above: October 1986 Land Rover County brochure cover and engine specification page

2.5 Litre 200 Tdi Diesel Engine 1989-1994 (Gemini)

With the 1989 launch of the Discovery came the all-new 200 Tdi, with 188 lb ft of torque. It featured an alloy cylinder head, a new Bosch direct injection system, and a strengthened ladder frame between the engine block and oil sump. The lessons learned from the Turbo diesel engine, mainly overheating and breather system issues, resulted in a sealed breather system.

This engine’s design enabled it to appear in all Land Rover models; it’s noted for its simplicity and, if maintained correctly, longevity. (The UK MoD declined the 200 Tdi in favour of the 2.5 NAD as the front cover could not be adapted to be fitted with the somewhat large 24v generator for the military radios installed inside the rear of the Land Rover.)

Dimensions: 2495cc, 90.47mm bore x 97mm stroke

Compression ratio: 21:1

Fuel system: Direct injection with DPS pump Power and torque: 107 bhp Defender 111 bhp Discovery and 188 lb Range Rover Classic

44 roversmagazine.com Holiday 2022

2.5 Litre 300 Tdi Diesel Engine 1994-2006 (Wolf)

The 300 Tdi is probably the most popular of any Land Rover diesel engine, being fitted across the whole range of vehicles, Defenders plus the Range Rover Classic and Discovery I.

The 300 Tdi offered refined idling and reduced vibration. Its des ignation as a “300” came from the rounding up of the 264 NM, 195 lb ft torque rating. With its increased profitability, Land Rover could ded icate funds for the revised engine block, fuel pump, brake servo pump and other components.

Since its launch (and an improvised modification kit that kept the timing belt aligned), the 300 Tdi has proved to be a stalwart power unit, provided it is maintained and serviced correctly. Many have recorded over 500,000 miles. Improved engine and transmission mounts have helped, along with further development of the Bosch injection pump.

Dimensions: 2495cc, 90.47mm bore x 97mm stroke Compression ratio: 21:1

Fuel system: Direct injection with DPS pump Power and torque: 111 bhp at 4000rpm 195 lb / 264 NM

Land Rover again offered full conversion kits for Classic Range Rover V8’s, Defender V8’s, 2.5 NAD/ TD/200Tdi, even offering an automatic kit. During its lifetime, the 300 Tdi re ceived modifications to comply with EU Emissions Regulations until its replace ment by the Td5.

To many enthusiasts, the Land Rover diesel of any vintage became the pinnacle for off-road use because of its torque at low rpm and its lack of an ig nition system. The sacrifices for on-road use (lower top speed, leisurely acceleration and higher decibel level) seemed well worth it then, and continue today. ///

[In addition to my personal archives, I want to acknowledge the brilliantly-researched books and articles by James Taylor for this information –Les Parker.]

[Note: For a more comprehensive history and additional information, such as Engine Prefix Codes, visit www.roversmagazine.com -ed.]

Holiday 2022 roversmagazine.com 45
1995 Land Rover 300 Tdi Power (PS) and Torque (Nm) chart Above: 1996 Land Rover Defender Tdi brochure cover

VERMONT ROVERS

PROPER PLACE / PROPER TRAILS

Outside of my friends and family, I have two main interests in life: vintage Land Rovers and rock music. The two don’t mix very often, if at all – but when they do, I’m ecstatic. (Besides, if Jeff Aronson can create an excuse to feature his Triumph TR7 in his column, I can put my rock band in mine!)

I play in Witch, a ‘70s-inspired hard rock band. The band formed in 2005, has several releases and has toured in both North America and Europe. After two consecutive years of cancellations due to Covid-19 restrictions, we finally com menced our threeweek, six-nation European tour this August.

Like any Land Rover enthusiast, I constantly looked out for Rovers along the way, albeit some times subconsciously. We travelled in a Mercedes Sprinter with a trailer in tow, which we rented from Nomads of Prague, a touring company based in the Czech Republic. I spent many long hours riding shotgun next to our Prague-based tour manager, Jara Spring. Any time a

Land Rover passed us on the highway, I immediately perked up and yelled, “ ‘90” or “110”. Eventually Jara started doing it, tapping me on the arm whilst staring into the side mirror on the Mercedes, shouting, “Look, look, look, awesome 110 coming up on the left.”

After about two weeks of this game, during which we spotted at least thirty Defenders along the way, Jara couldn’t stop talking about Land Rovers. He’s a surfer and travels by air to surf destinations around the world, including European ones. The Defender 110 appealed to him for its functionality, ability to carry boards on the roof and capability as a camper. Every morning at breakfast, he eagerly showed me the Defenders he had found the night before on various used vehicle websites. By the time the tour ended, he was converted and headed home intent on buying a 110. As we go to press, he’s on the road again managing a bus tour and frequently sending me photos of Land Rovers along his route.

46 roversmagazine.com Holiday 2022
Dave and Jara on the lookout for Defenders Being passed by a 110 on the Autobahn Witch on stage in Hamburg Above: Random Defender sightings

The second-to-last show of our tour took place at Sonic Blast, a weekend-long festival in Moledo, Portugal. Every August, several thousand music fans from all over the world descend upon the small beach town, located about an hour north of Porto. After we played our set, the band and I set off to see the beach at night, only 100 yards from the stage. As we exited the main gate of the festival grounds, I spotted a green late-80s Defender 90 with the words ‘Guarda Nacional Republicana’ emblazoned on the rear section of the roof. I ran up to the truck and started taking photos, until a large man in a military uniform, holding a machine gun, walked over to me and started speaking Portuguese in a shrill, forceful manner. Like in my previous Italian military Land Rover encounter [see Summer/Fall 2022 issue -ed], I forgot that these trucks are being used in a “work” capacity, and their drivers, aka soldiers, are there to do a job. My first thought was to ask him if he knows of an auction house where the retired Land Rovers are sold off, but he just kept yelling at me. Finally a nice Portuguese festival attendee who had been watching this en counter came over to me and told me that I should get away from the ve hicle. I had him translate to the soldier that I only had an interest in Land Rovers and assured him that I was not a threat to national security. I pulled up photos on my phone to show him Land Rovers being used in the woods of Vermont and it finally clicked to him that I was just nerding out over his nicely aged Defender. He told the translator that he didn’t quite understand why I’d be interested in that old truck, but “to each his own.”

Days later, the next show took place high in the Swiss Alps at a festival called Palp. We flew into Geneva and were driven to the town of Verbier. From there, we went to the next valley over and up a very steep road to the festival area, at 6,000 feet altitude. We rode in awe of the views across the

Alps as we weaved back and forth up a series of switchbacks. The festival employee driving our van took each turn with conviction, making us cringe on every hairpin where we could see the drop-off below. We finally relaxed once we reached the pinnacle with its rolling hill plateau inter spersed with tall evergreen trees. Our festival handler greeted us with a Raclette, a traditional Swiss dish. (Raclette is a wheel of special Swiss cheese, whose melted portions rest on a plate, served with a boiled potato and beer.

As I walked away holding my plate, I spotted a mid-2000s Defender 90 set up as if intended for camping with an extended roof tent. I walked back to the handler and asked who owned the D90. She informed me that Blaise Coutaz, the founder of Palp, owned the Defender. We hit it off over our interests in both rock music and Land Rovers. Blaise uses his Defender as a daily driver and, like most owners who use their trucks all year round, is in a constant rotation of repairs and maintenance. He pointed out the recent fixes and the upcoming work, slightly crusty outriggers and a rear crossmember. He installed the roof tent several years ago because he ap preciates the spontaneity of heading off on weekends to random locations throughout the French region of the Swiss Alps. The D90 enables him to be self-sufficient and camp at one of the many vistas designated for such activity. I had one Vermont Rovers sticker in my guitar case, which he quickly stuck onto the back of his truck.

Although I often go off-roading on weekends with the Vermont Rover Club around New England, I didn’t expect to find a fellow enthusi ast in the Swiss Alps who shared my two passions. I made a tentative plan to go back to Switzerland next year to see more of the Alps, not just as a musician, but as a Land Rover enthusiast. /// [Follow Dave Sweetapple on Instagram @VermontRovers and @RoversMag -ed.]

Holiday 2022 roversmagazine.com 47
Above: The GNR 90 in Moledo, Portugal Above: Palp Festival mascot in the Swiss Alps

When the QE I, my ’66 Series IIA 88” SW, and I moved to the is land of Vinalhaven, ME, 31 years ago, friends and family as sumed I’d gone off the deep end (based on my prior decisions, a painful if comprehendible conclusion). “How long is the ferry ride?” “What do you mean, no ferries at night?” “What on earth do you do there?”

Locals wondered exactly what I might have done to wind up here. “Everyone has a hidden story,” one wife said inquisitively. Her husband, who runs the island’s boatyard, saw my Land Rover and could barely contain his guffaws when he insisted, “I have the perfect bumper sticker for you. ‘My other car is a piece of s*** too.’” Nevertheless, the island suits me well. I consider it a Vermont town surrounded by an ocean.

Vinalhaven’s considerable charm has lured Rovers North’s Mark and Andrea Letorney, along with their dogs, to visit. The magazine’s Cre ative Director, Thompson Smith, and his family chowed down a lobster dinner here during a Maine vacation. Bruce Fowler has attributed the creation of the Maine Winter Romp to a group visit decades ago. Other enthusiasts have graced me with their visits over the years. Indeed, the connection between Land Rover enthusiasts, whether virtual or in per son, forms a powerful bond. Living on an island means that, most of the time, my Land Rover friendships remain virtual, but this summer proved different.

You cannot be a Land Rover enthusiast without applauding the amazing photography and writing of Nick Dimbleby. He’s constantly traveling the world on behalf of Jaguar Land Rover. His talent has chronicled every model in photos as a well as print; most recently, he used the Covid-19 isolation to create the definitive history of the Camel Trophy [See Holiday 2021 issue -ed]. Our paths have crossed at Land Rover Global Media events, and Nick has generously contributed photo graphs to Rovers Magazine. When he wrote that his family’s vacation travel plans for August centered on New England, I invited them to visit the island. Nick’s North American counterparts in the ‘90’s were Alan

BEHIND THE STEERING WHEEL

Story,

PROPER NOISES / PROPER VIEW

and Sally Seymour, who keep a boat in Maine [See Summer/Fall 2020 issue -ed]. Happily, they transported the Dimbleby clan (Lisa and chil dren Oscar and Pippa) on this recent visit.

JLR gave Nick the cour tesy of a Defender 110 during his sojourn in New England, so my 109” (“It straddles the line between ‘patina’ and ‘tatty’ ”) threatened to inject Land Rover living into what was to be a “Land Rover-free zone” vacation. In case Nick’s Gen Z kids won dered about the reasons behind the new Defender, the ride in “Rickman” down our frost-heaved roads answered their questions. We toured our local lighthouse and Oscar showed off his considerable diving chops at one of our quarries. Nick sent a gracious thank you; “We had an amazing trip to New England, made all the better by our fantastic day in Vinalhaven. During our flight home [to the UK] we flew over the island and gave you a wave!”

If you’re a member of Texas Rovers or an attendee at SCARR, then you’ve met Joey Pitts. The off-road driving instructor and SCARR Trail Leader also works for the family trucking company; that connection led him to meet Blake and Diana Aslin. These two Houston-area residents left the sprawl behind to become liveaboards on their sailboat, a 38-ft Erickson named Josephine. When they told Joey that their itinerary would include Maine’s Penobscot Bay, he told them, “I know someone who lives on an island there.” Texts flew back and forth and one Sep tember morning, I found myself sitting in my 109” at a landing, wait ing for a skiff to arrive with two passengers.

With me in the 109” sat Jenny Mays, a St. Louis resident who chose to spend the last days of her year-long sabbatical from work touring the country. Somehow, her quick stop in Maine included two days on the island. She’d never ridden in a Land Rover but she ac cepted the invitation to ride with me and meet the boat people, figur ing it would be another adventure.

Similarly, Blake and Diana had left their professional lives behind, sold their land-based possessions and bought Josephine a few years ago. Their 2022 plans called for them to spend the summer in New England and the northeast coast, wait out the hurricane season then head to the Caribbean for the winter. Contrasting that with my winter plans, which call for tossing many cords of wood into my woodstove and shoveling vast quantities of snow, my envy rose considerably.

48 roversmagazine.com Holiday 2022
Nick Dimbleby and family, Vinalhaven, ME

Tanned, fit and exceedingly chuffed from their boat life, their good cheer annoyed me as much as Cindy Lou Who aggravated the Grinch. Why had I chosen a life of endless toil with four jobs, three Land Rovers and two Triumphs requiring as much attention and maintenance as young children? It took only moments for my grumpiness to melt as their joy over seeing my 109” SW spread over me. It transported us to a lighthouse sitting on a bluff overlooking the entrance to a wide channel called “The Thorofare.” Next, we stopped at the island’s grocery store where they stocked up on fresh fruits and vegetables. We toured aban doned quarries, swimming holes and a couple of scenic beaches.

Diana summed up the day: “Today was my first day in a Land Rover; a light blue 1967 Land Rover Station Wagon with an antique designation on the license plate. The interior smelled like my stepdad’s old red Chevy; a mix of worn vinyl tinged with aging metal. We bumped and bounced our way through the narrow, winding roads of Vinalhaven, Maine with windows slid open and the breeze from the rooftop vents whispering through my hair. In the first jolt of wheel meeting pothole, I bounced about six inches off my seat, instantly grateful for the high-support sports bra I was wearing. The tumultu ous motion of the ride was matched with intermittent clanking and clunking with an undertone of a deep, continuous hum from the vibra tion of rubber meeting the asphalt. The sounds muffled the voices in the front seat. In between Jeff pointing out sights, I got to know Jenny, a solo traveler. Maybe it was the familiar smells or the kindred spirits around me, but in the chaos of motion and sound, I found a sense of belonging in the backseat of an old Land Rover.”

OK, so maybe I should hose out the interior, install new leaf springs and door seals, and secure the shovel, tools, jack handle and crank better.

Rob Williams, Dubuque, IA, works as an engineer for John Deere, help ing design Transformers-size equipment. On a trip to a family reunion in Maine a few years ago, he went home via Vermont and took a side trip to Rovers North.

Last September, Rob sent me a message introducing himself as a Rovers Magazine reader flying into Portland, ME, for another family re union. “Being from Iowa, Series Land Rovers are on the rare side,” he wrote. “Would you happen to know anyone around Oxford, ME, who may be up for a pint and Rover talk? I hope to get the opportunity meet with some folks,” he continued. “I bought my Series III in 2005 while in grad school (because evidently I thought I had plenty of time and money). I finally started restoring it 3.5 years ago. I’ve still not actually driven a Land Rover.”

I posted his request on the Downeast Land Rover Club’s Facebook page; that resulted in an ‘enjoyable time” with Andrew Pratt of Expanse Outfitters in Scarborough. Rob also accepted an invitation to visit me on the island, which enabled me to give him a ride in a Series Land Rover. He lucked out with a sunny, calm 1.5 hour ferry ride; I pretended that the unusually nice weather was the norm. We immediately headed for lunch at the award-winning “Greet’s Eats” (Best Lobster Roll category). Having visitors as guests forces me to actually travel the short distances to the locales that make the place so appealing to tourists.

I listened as Rob described his family’s connection with Maine as well his personal history with his Land Rover. We swapped tales of his high school teaching experiences and his life through his family farm. He has given substantial time to volunteer activities to benefit his “small city.” (Its population matches that of Portland, Maine’s largest, and vastly exceeds that of Burlington, Vermont’s largest.) I’m fairly confident that the ride in my Series Rover gave Rob the impetus to finish up his Series III so it would be in better condition than his island ride!

These visits by enthusiasts confirm the remarkable range of people who embrace Land Rovers as central – but not exclusive – to their lives. Whether through photography and writing, visiting and friendship, volunteering and reconnecting, let your Land Rover remain a part of your adventures – and please share them with us.

To everyone who reads this magazine, here’s a heartfelt wish for a meaningful and engaging Holiday season! ///

Holiday 2022 roversmagazine.com 49
L-R: Blake and Diana Aslin, Jenny Mays Rob Williams

DEFENDER MINI MULTITOOL AND BOTTLE OPENER

Black credit card sized Multi Tool and Bottle Opener in the shape of the Land Rover Defender. Made from steel. RNG2225 $ 16.95

Holida y G ifts

CERTIFICATES

SERIES 109 EXPEDITION

BEVERAGE OPENER

Crack open your favourite beverage Rovers North style. Hand made in New England, our stainless steel beverage opener will do it every time.

RNABO1 $ 8.99

DOOR TOP SPEEDNUT, ALUMINUM 10mm

Rocks in Christmas socks are so old school drop in some solid billet aluminum parts and really throw them off! Our door-top Speed nuts are the perfect accessory when you want to remove the door tops quickly to install our padded armrest or when re-installing the door tops.

Series SPDNUT1 $ 69.50

Defender SPDNUT2 $ 69.50

WAXED COTTON HATS

Arrive In style! Rovers North waxed cotton hats feature the Rallye Plate Logo on the front and the Land Rover logo on the back. Awesome quality, perfect for wet weather, adjustable to fit all sizes. Green RNH05G $ 28.50 Brown RNH05B $ 28.50

DEFENDER LHD SHOW SHIELD FOR HEATER

INTAKE

A must for Defenders operat ing in northern climates. Easy to install, includes mounting hardware. RNA2102 $ 39.90

FILLER SPOUT

FOR NATO FUEL CAN EPA APPROVED

EPA approved filler spout for use in the USA. Fits: Approved NATO fuel can RNF246.

PLF245 $ 29.00

Long Flexible PLF245F $ 26.00

FUEL CAN 20L GREEN NATO APPROVED

This is the Genuine NATO approved five gallon (20 liter) fuel container. Features leak-proof lid with built-in vent for easy pouring. Includes safety pin for lid. Ex pedition proven leakproof design for extreme conditions. Out-performs domestic containers.

FUEL CAN 20L RNF246 $ 59.90

HOLDER FOR 20L RNA0114 $ 49.50

collector or enthusiast. The 50 Kwacha bill is the only bank note that de picts a Land Rover. RBM50KWA $ 5.00

WATER CONTAINER

One of the highest quality water cans on the market. Manufactured for water only and used by the Australian mil itary. Containers are BPA free, food grade, and UV stabilized, designed for extensive outdoor use. Made in Australia. RNA817 $ 59.90

BELT BUCKLES

Add some bling to your belt. Custom metal belt buckle designs feature laser etched artwork.

BUCK KNIVES

Enjoy the precision and beauty of a Genuine Buck Knife. Aweome cubbybox addition for any Land Rover owner. Laser etched logos, makes for a nice stocking stuffer.

327 Nobleman Knife, Rovers North Rallye Plate RNBK2 $42.00 726 Mini Spitfire Knife, DEFENDER RNBK3 $45.00 726 Mini Spitfire Knife, Rovers North Logotype RNBK4 $ 51.00

50
The Source for Classic Land Rover Parts
roversnorth.com
RNBK2 RNBB2 RNBB3 RNBK3 RNBK4
$
$
$ 31.99
DEFENDER 90 Expedition ..RNBB1
31.99 Rovers North Rallye Plate RNBB2
31.99 Series 109 Station Wagon RNBB3
RNA2102 H
RNH05G RNH05B PLF245
........
GIFT
Pamper your honey with Rovers North money! Additional amounts available, please call. RNGC25 $ 25.00 RNGC50 ..........$ 50.00 RNGC100
RNGC200........ RNBB1

Holida y G ifts

DEFENDER 90 GREEN/WHITE 1:43 SCALE MODEL

Detailed scale Cararama die-cast model. RNG2190G $ 11.95

RNG2190G

SERIES II 109 STATION

WAGON 1:76 SCALE MODEL

A genuine Oxford Collect able. Super detailed 1:72 scale die cast metal and plastic model of Her Majesty's 44th Home Counties Division.

RNG3010 $ 18.99

RNG2191B

DEFENDER 90 EXPEDITION

1:24 SCALE MODEL

Detailed scale Welly die-cast model. Black RNG2191B $ 21.95

NEW H

1964 LAND ROVER SERIES IIA 500-PIECE PUZZLE

500-piece puzzle of a 1964 Series IIA. Includes 8 3/8" x 6 5/8" mini poster for reference. Completed puzzle size is 23 4/5" x 19". Not suitable for children under 3 years of age. RNG2238 $ 19.95

101FC AMBULANCE

1:76 SCALE MODEL

A genuine Oxford collectable, super detailed 1:76 scale model. Includes display case.

DISCOVERY SPORT 1:43 SCALE MODEL

Resin collectors grade model with closed parts. Suitable for children 14+ years old. For use under adult supervision.

RNG9918 $ 49.00

RADIO CONTROLLED DEFENDER 90

Officially licensed by Land Rover, these are the perfect RC car for running around the inside of the house on smooth surfaces. They are very de tailed and also show well on the bookshelf display. Features opening doors, working lights, forward, backward mo tion and steering control.

1:14 SCALE RC DEFENDER 90 TAN RNG3840T $ 39.95

GENUINE LAND ROVER

FIRST AID KIT

Complete first aid kit for emergencies. VPLKS0615 $ 89.95

RNG3024 $ 24.50 RNA1242

FIRST AID KIT ON BOARD STICKER RNA1242 $ 2.49

“Love Rovers North, always quick to respond, more than willing to help. “ -Clinton, USA (800) 403-7591 roversnorth.com 51
NEW H
52 roversnorth.com The Source for Classic Land Rover Parts BOOK94 $ 31.45 LAND ROVERS IN THE BRITISH MILITARY Coil-sprung models 1970 to 2007 BOOK96 $ 49.50 MILITARY LAND ROVER 1948 ONWARDSSeries, De fender, 101, Wolf History and Development. BOOK76 $ 29.95 THEY FOUND OUR ENGINEER The Story of Arthur Goodard, The Land Rover’s First Engi neer BOOK71 $ 23.50 RANGE ROVER-FIRST GENERATION Models 1970 to 1996: The Essential Buyer’s Guide. BOOK92 $ 24.95 FENDER & THE CLIFF RESCUE BOOK85 $ 19.50 RESTORATION MANUAL Step-by-step how to restore your Series I, II & III. Hardcover 280pg. BOOK24 $ 29.95 LAND ROVER DEFENDER 90 AND 110 RANGE 30 years of the Coil-Sprung 4x4 models. BOOK79 $ 44.95 FIRST OVERLAND BOOK72 15.00 CAMEL TROPHY BOOK The BEST 4x4xFAR photographer has his own book! Enjoy Nick Dim bleby’s treasure on the definitive Camel Trophy history. BOOK99 $ 69.50 Rovers North 2023 Land Rover Calendar THE HALF-TON MILITARY The Story of the Land Rover ‘Lightweight’. BOOK95 $ 39.95 Our collection of the finest Land Rover photography. CAL2023 $ 14.99 NEW H FENDER’S DAY AT THE HARBOUR BOOK86 $ 19.50 LAND ROVER 110 AND 90 SPECIFICATION GUIDE BOOK98 $ 29.99 TRANS AFRICA LAND ROVER By Martin Port BOOK101 $ 59.99 Holida y G ifts FENDER CHILDREN’S BOOK BOOK84 $ 22.92 NEW H DEFENDER RESTORATION MANUAL BOOK57 $ 69.95 BUYER’S GUIDE SERIES III 1971-1985 BOOK97 $ 19.95 SERIES MAINTENANCE & UPGRADES BOOK91 $ 34.95 BUYER’S GUIDE SERIES 1948-1971 BOOK73 $ 19.95

PROP SHAFT SOCKET TOOL

Series, Defender & Discovery

For easy front or rear prop shaft removal. RNT141

TRANSMISSION

MAIN SHAFT

NUT TOOL

Series II, IIA, III, 2.25 & 2.26 Litre

RNT0002 $ 69.95

HUB NUT TOOL

Series, Defender, Discovery I & Range Rover Classic

2 1/6” for servicing the adjuster and lock nuts on your Land Rover’s hub bearings. RNF406

HUB NUT SOCKET

52mm Cast Chrome Molybdenum 1/2” drive RNF405 $ 48.00

OIL DRAIN PLUG TOOL

Oil drain plug tool for slotted type drain plugs on Series differentials and gearboxes.

RNT0003 $ 39.95

TOOL BAR

For use with RNT002, RNF406 & RNT003

RNT0004 $ 12.95

TOOL HANDLE

HYDRAULIC JACK

3-PIECE

Genuine RNX155 $ 107.66

2-PIECE, DEFENDER PUMA

Genuine RNX156 $ 77.36

HEAVY DUTY LUG WRENCHES

Series, Defender with steel wheels. Early Series IIA with 15/16" lugnuts

RNM203

ARB SPEEDY SEAL

TIRE REPAIR KIT 10000010 $ 48.00

ARB ON-BOARD HIGH PERFORMANCE

12 VOLT TWIN AIR COMPRESSOR

ARB601 $ 70.00

HYDRAULIC JACK

Defender 90, 110, Discovery I, II, Range Rover Classic, Genuine RNX157 $ 284.81

Perfect for expedition travel where rapid inflation of small, medium and large tires are required. Works with air tools rated up to 85LPM [3CFM] @ 6Bar [90PSI] for continuous supply. Kit includes: Complete wiring loom w/Air Locker solenoid plug-in terminals; Automotive OEM quality compressor isolating switch; 2x relocatable splash-resis tant air filters with washable high-flow sintered bronze filter cartridges; mounting bolts, washers and comprehensive photo illustrated installation guide. ARB On-Board 12 V Twin Air Compressor CKMTA12 $ 616.00 ARB On-Board 12V Compact Air Compressor CKSA12 $ 241.00

LUG15-16 $ 19.95 Lug Wrench Defender from VIN #9A768128, Genuine RNM203 $ 33.92

SPANNERS FOR FUEL PUMP LOCKING RINGS

Fuel Pump Spanner specifically designed to remove the locking ring on plastic tanks with 'in-tank' fuel pumps.

PLASTIC LOCKING RING TOOL

FITS: Plastic locking ring NTC5858 used on NAS De fender 90 1994-1997, Range Rover Classic 1991-1995 and Discovery I up to 1994-1997 without advanced evaporative loss. RNT0014 $ 24.95

METAL LOCKING RING TOOL

FITS: 97-04 Metal lock ring used on Range Rover P38A, Defender and Discovery I & II from 1997 -2004. RNT0015 $ 129.95

RNT0014

DIESEL TIMING TOOL KIT

Diesel 2.5 NA, 2.5 Turbo, 200 Tdi & 300 Tdi engines. For engine & injection pump timing adjustments. RNT2029 $ 99.95

RNT0015

WHITWORTH SPANNER SET 8-PIECE w/LEATHER CASE

Whitworth 8-piece satin finish chrome vanadium combination wrench set. Sizes 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16. Supplied in a tra ditional oiled leather tool roll. Standard length of 7/16"250mm. WWS1000 $ 79.95

“Easy to Find a Part and Good Choice” - Miriam, Peru
CLUTCH ALIGNMENT TOOLS Series II, IIA, III, 2.25 & 2.26 Litre TLS33 $ 5.45 Defender, Discovery V8 TLS33D $ 5.45 Defender 2.5 petrol, diesel, 2.5 turbo, 200/300 Tdi TLS300 $ 5.45 Defender Td5 PUMA TLS600 $ 12.50 Td5 Flywheel Locking Tool TLS980 $ 18.00 RNT0084 BULLET END CRIMPING TOOL RNT0084 $ 58.95 CKMTA12 RNT2029 CLASSIC PARTS RNT0007S REAR SUSPENSION A-FRAME PRESS TOOL
BRAKE POWER BLEEDER
RNA0228 Holida y G ifts ARB TIRE INFLATOR WITH DIGITAL GAUGE
36mm (800) 403-7591 roversnorth.com 53
For Defender, RR Classic, Discovery I RNA0228 $ 45.00
RNT0007S $ 98.00
VISCOUS FAN TOOL Defender, Discovery 1994-2004 & Range Rover 1987-2002. Specialized tool for easy fan removal. 32mm &

Land Rover Enthusiast

Holida y G ifts

FULL-ZIP HOODY

So , durable fleece is a must-have for the colder season, and our Land Rover full-zip hoodie in Bronze Green checks all the boxes. The perfect weight and fit is complemented by an original Land Rover logo patch at the chest and a woven patch on the upper sleeve. Available in M-XXL. RNG9930 $ 114.99

WOOL CAP

NEW H

Cold weather ad venture always begins with wool. This hard-wea ring melton wool cap will get you through the worst of conditions, just like a solid Land Rover will. Wool/polyester blend 60/40, one size fits all. RNH2010 $ 49.98

RIB KNIT CREW-NECK SWEATER

This military style wool blend sweater in Bronze Green is an excellent winter choice. So and warm ribbed wool blend with reinforced canvas patches on the shoulders and extended elbows. It features a sub tle Land Rover logo patch on the le sleeve and small Union Jack button patch on the right shoulder. Utilitar ian fashion at its finest. Fabric: 50% Acrylic / 50% Wool. Available in M-XXL. RNG9928 $ 149.99

FIELD BACKPACK

Our vintage Land Rover ‘Field Service Kit’ is constructed in durable nylon with webbing straps, 2-layer felt ap pliqué LR Badge and two woven patches. Load it for adventure. Dimensions: 15” H x 11” W, 15.5” D. Yellow. RNG9933 $ 89.98

54 roversnorth.com The Source for Classic Land Rover Parts

PULLOVER HOODY

So , durable fleece is a must-have for the colder season, and our Land Rover pullover hoodie in Bronze Green will be your favorite. The perfect weight and fit is complemented by a Land Rover applique across the front at the chest and a woven patch on the upper sleeve. Available in M-XXL.

RNG9929 $ 114.99

RNG9926

THROW BLANKET

This beautiful Land Rover logo blanket is perfect for the home, a picnic, or tail gating in the back of your Land Rover. The light-weight yet durable wool blend makes it easy to bring with you to your favorite sporting events and Rover rallies year-round. Size: 49" x 53". Fabric Blend: 67% Wool/Laine, 28% Poly ester, 5% Acrylic. RNG9926 $ 169.99

OLIVE T-SHIRT

100% Cotton, available in M-XXL. TS97 $ 44.98

HERITAGE T-SHIRT

100% Cotton, available in M-XXL. TS99 $ 44.98

KHAKI GREEN T-SHIRT

100% Cotton, available in M-XXL. TS98 $ 44.98

DUFFLE BAG

This large travel bag is made in durable yet lightweight nylon with webbing straps. One embroidered and three felt appliqué patches celebrate the Land Rover history and chunky metal hardware and zippers finish o this timeless classic. The perfect weekender bag!

Dimensions: 23″ W x 13″ H 12″ D.

Made of 100% Nylon. RNG9907 $ 174.99

NEW H

WOOL TOQUE BEANIE

This thick wool blend beanie will keep you warm all winter. Featur ing Land Rover and Union Jack patches. 50% wool 50% acrylic

RNH2009 $ 49.98

LAND ROVER PATCH HAT

A versatile mid-profile 5-panel cap features an interchangeable velcro Land Rover patch in dark slate color. Made of 100% brushed cot ton. Removable velcro pull-patch RNH2011 $ 34.98

NEW H

LAND ROVER COVERALLS

Vintage inspired coveralls are ideal for working on your Land Rover or wearing to a Rover rally. Olive green with a large Land Rover embroidered on the back in beige, these coveralls have many features you'll love. Available in M-XL. RNG9927 $ 189.99

“Site is easy to navigate and customer service has always been spot on! “
roversnorth.com 55
-Josh, USA (800) 403-7591

RIPSTOP BAG

ROVER

56 roversnorth.com The Source for Classic Land Rover Parts
This
RNG9923 OLIVE
100% cotton hat
Velcro
applique Land
RNH2007
RNH2007
patches
groceries
LAND
Sport
NEW H
GREEN HAT 100% cotton hat featuring Land
the
and Velcro closure. RNH2008
HERITAGE COWHIDE WALLET Built to last and age with character like the immortal vehicles. Dimen sions: 5” L x 4” W x .75” H. RNG9932 $ 89.99 RNH2008 KHAKI GREEN T-SHIRT 100% Cotton, available in M-XXL TS98 $ 44.98 RNG9912 NEW H RNG9931
light and durable stu sack will handle a big mission’s worth. Features a two-layer felt applique vintage Land Rover patch and a woven flag patch. Deploy and Enjoy. 100% cotton, olive color. Dimensions: 15” H x 7.5” D. RNG9923 $ 24.99
HAT
with
closure and
Rover logo.
$ 34.98
LAND
UTILITY BAG Classic colours and vintage appliqué
celebrate Land Rovers throughout their long history. This one bag takes all of our daily gear with room to spare for a few
in a fine balance of size, utility and classic design. Dimensions: 17.5” W x 16.5” H, 100% Nylon. RNG9912 $ 69.98
ROVER APRON
your true colors with a heavy-duty cotton twill apron. Wrenching on your Land Rover or BBQ-ing in style, this is the one to have. RNG9931 $ 59.99
GRASMERE
Rover patch on
front
$ 34.98

NYLON MESSENGER BAG

Made with a sturdy, water-resistant nylon fabric, including a licensed Land Rover logo and an ad justable strap suitable for over the shoulder or crossbody carry. Perfect for everyday carry with two-position brass snap to hold everything you need. Dimensions: 14” W x 3.5” D, 11” H. Green. RNG9909 $ 49.98

CANVAS MESSENGER BAG

A heavy-duty canvas messenger bag with licensed Land Rover applique. This bag features an adjus table strap with brass accents with shoulder or crossbody carry. Ideal for holding necessities or a small tablet (interior is 13" wide and 10" tall). This would make a great gift for any Land Rover enthusiast. Tan RNG9910 $ 49.98

(800) 403-7591 roversnorth.com 57 RNG9909 RNG9910
LAND ROVER PATCHES Large 7.5” x 3” Felt patch RNG9925 $ 12.99 Small 4.5” x 2” Felt patch RNG9924 $ 9.99
Service Kit’
con
durable nylon with webbing straps, 2-layer felt
Badge
two woven patches.
RIB KNIT CREWNECK SWEATER Utilitarian fashion at its finest. Fabric: 50% Acrylic / 50% Wool. Available in M-XXL.
$ 149.99 WOOL CAP Wool/polyester blend 60/40, one size fits all.
$ 49.98
y G ifts
RNG9911 FIELD BACKPACK Our vintage Land Rover ‘Field
is
structed in
appliqué LR
and
Load it for adventure. Dimensions: 15” H x 11” W, 15.5” D, Kahki. RNG9911 $ 80.98
RNG9928
RNH2010
Holida

Decal “LEVEL MARK” Air Cleaner Oil, Series

Decal Brake Reservoir, “Girling” Series

Engine Bay Decal Set, Series II, IIA, III

$ 4.95

RNA1255 $ 3.95

RNA1257 $ 3.95

RNA1256 $ 19.95

Front - Grille, Bonnet, Wing

Grille

Grille Badge Land Rover

58 roversnorth.com The Source for Classic Land Rover Parts
Engine Bay Decals Restore your Land Rover Series II, IIA, III engine bay back to an original look with our new Series Engine Bay Decals. Printed on high-quality vinyl. RNA1250 RNA1255 RNA1252 RNA1251 RNA1254 RNA1253 RNA1257 RNC921 PLQ173 PLQ174 Stickers, Decals, Badges RNC930 RNQ645 RNN974 RNN975 Engine Compartment Warning Labels Set of 5, ProLine PLQ173 $ 15.95 Label Set Multipurpose Fan, ProLine PLQ174 $ 15.95 Label Antifreeze Warning RNQ860 $ 4.35 Label Negative Earth 12V RNC591 $ 17.18 Label Negative Earth 24V RNC590 $ 11.14 Label Coolant Warning Expansion Tank RND565 $ 1.71 Label Radiator Fan Warning, Range Rover L322 ..........................................RNQ175 $ 1.42 Label Warning A/C Fans 4.0L V8 RNQ176 $ 7.36 Decal Oil Bath Cleaner Instructions, Series RNA1250 $ 3.95 Decal Air Cleaner “Wash Thoroughly...” Series RNA1251 $ 3.95 Decal Oil Fill “Lubricating Oil Use Only...” Series RNA1252 $ 3.95 Decal Heater “SMITHS” Series RNA1253 $ 2.95
“12V Lucas Coil” Series RNA1254
Series
Decal
Badge Land Rover, Green & Gold, Defender 90, Genuine RNQ184 $ 19.12
Grille Badge Gold/Green P38A, Discovery I, II RNF771 $ 29.45
L320, L322 RNQ474 $
Badge "LAND ROVER”, Gold & Green Defender 90, Genuine RNB318 $
Badge "LAND ROVER", Silver & Green, Genuine .........................................RNQ185 $
Badge Land Rover Series II, IIA, III
$
Land Rover Molded 3D Plastic Badge, Black/Silver, L322
$
Label
Adhesive Sticker
90,
23.04
41.55
33.32 Brass
PLF700B
69.00
RNX972
23.04
“LAND-ROVER”
PLB918L $ 4.99 Decal "DEFENDER" Front Silver/Black Defender
Genuine RNC921 $ 39.40 Decal "LAND ROVER" Front Defender, Genuine RNC930 $ 106.20
RNB318 PLQ174 RNQ474
Decal Bonnet “DEFE”, Brunel, Genuine RNQ645 $ 73.63 Decal Bonnet “DEFE”, Black, Genuine RNQ879 $ 70.16

Decal Bonnet “NDER”, Brunel, Genuine

RNQ646 $ 73.63

Decal Bonnet “NDER”, Black, Genuine RNQ880 $ 69.95

Decal "LAND" Bonnet Silver '07+, Genuine RNN976 $ 71.89

Decal "LAND" Bonnet Titan, Genuine RNQ186 $ 64.46

Decal "LAND" Bonnet Gloss Black, Genuine RNN974 $ 93.24

Decal "ROVER" Bonnet Silver '07+, Genuine .................................................RNN977 $ 79.70

Decal "ROVER" Bonnet Titan, Genuine RNQ187 $ 72.98

Decal "ROVER" Bonnet Gloss Black, Genuine RNN975 $ 100.51

Decal “RANGE”Bonnet L322 2002-2009 RNI338 $ 101.96

Decal “ROVER” Bonnet L322 2002-2009 RNI339 $ 102.42

Decal “LAND ROVER”, Bonnet Discovery Grey RNB105 $ 75.34

Decal Bonnet Grey, Discovery II RNF784 $ 96.88

Decal “LAND ROVER” Discovery Bonnet Silver RNF783 $ 98.70

Decal Chrome “LAND” Discovery II RNQ480 $ 72.41

Decal Chrome “ROVER” Discovery II RNQ481 $ 76.77

Decal “RANGE ROVER” Bonnet Silver, P38A RNF769 $ 102.21

Decal “Td5” Front Wing, Defender, Charcoal RNI566 $ 52.59

Decal “Td5” Silver, Defender RNI571 $ 32.71

Decal “Tdi” Front Wing, Defender, Charcoal ................................................RNI562 $ 13.63

Decal "Tdi" Light Grey Defender Front Wing, Genuine RNI561 $ 17.53

Decal "Tdi" Silver/Black Defender Front, Genuine RNS274 $ 160.92

Decal “V8” Gunsmoke Silver, Discovery II RNI572 $ 28.78

Decal “V8” Front Wing Defender Silver, Genuine RNH873 $ 45.73

Decal “V8” Front Wing Defender Black, Genuine RNQ203 $ 30.92

Rear -

Tailgate, Exterior

Label Unleaded Fuel............................................................................................PLI564 $ 3.99

Interior

Label

Decal

Label

Decal

Decal Door Top Lock, LH/RH Series III, ProLine PLQ209SER $ 5.95

Child Safety Lock Label, Genuine RNQ181 $ 3.09

Diff Lock Warning Label, Genuine RNC924 $ 8.96

Center Diff Lock Instructions, Defender, Genuine .......................................RNQ190 $ 9.35

Jack Information Label, Genuine RNQ183 $ 11.56

MPH Overlay Sticker 200 kph Speedometer

RNA0239 $ 22.00

MPH Overlay Sticker kph Speedometer RNA0237 $ 18.50

Name Badge, Land Rover, Lower A/C Dash RNY338 $ 26.95

Label A/C Switch Panel Defender 4.0L V-8, Genuine RNQ205 $ 44.46

Label Heater Control Defender, ProLine PLE331 $ 8.50

Label, Fan Control, ProLine PLE332 $ 8.50

Label, Transfer Box Shift, Genuine RNI565 $ 4.26

Label Sunroof Defender RNS704 $ 3.74

Label Fusebox Defender from 2A622424 RNQ207 $ 9.95

Label Instructions Transfer Box RNB302 $ 3.18

Decal Warning Auto Trans Discovery II RNQ484 $ 14.02

Label, Ex-MoD Light Switch, Genuine ............................................................RNB967 $ 7.29

Label Diesel Caution Fuel Defender

RNY339 $ 3.57 Label, “Diesel Fuel,” Genuine RNC161 $ 7.30 Label, “Unleaded Fuel Only,” Genuine RNE457 $ 21.70

Decal "DEFENDER" Rear Brunel, Genuine RNS267 $ 30.70 Decal "DEFENDER" Rear Titan, Genuine RNS268 $ 30.70

Decal Rear “LAND ROVER” Defender, Silver/Black RNQ193 $ 30.92

Badge “LAND ROVER” Rear Body RNX737 $ 50.57

Badge Rear “DEFENDER” Titan RNQ189 $ 27.91

Badge Rear “DEFENDER” Brunel/Graphite RNQ188 $ 18.37

Decal “DEFENDER 90” Rear Silver/Clear RNI567 $ 45.73

Decal “DEFENDER 90” Rear Charcoal RNI568 $ 28.78

Decal “DEFENDER 90” Rear Light Grey on C RNI574 $ 42.59

Decal “DEFENDER 110” Rear Silver ................................................................RNQ199 $ 42.59

Decal “DEFENDER 110” Rear Charcoal RNQ200 $ 30.01

Decal “DEFENDER 110” Rear Light Grey RNS272 $ 53.52

Decal “COUNTY” Silver, Range Rover Classic PLF762 $ 9.95

Decal Tailgate “RANGE” L322 2002 2009 RNY340 $ 101.96 Decal Tailgate “ROVER” L322 2002 2009 RNY341 $ 102.42

Decal “DISCOVERY” Silver, Discovery Tailgate RNB115 $ 39.36

Decal “DISCOVERY” Rear Door, DII Grey

RNF782 $ 76.91

Badge “SERIES II”, Discovery II Rear RNF796 $ 51.95

Name Plate Cast Alloy "LAND ROVER” Series IIA III, ProLine PLF700A $ 79.00

Name Plate Cast Alloy “Land Rover Station Wagon” RNA0113 $ 79.50

Name Plate Cast Alloy “Land Rover Defender 90 NAS” RNA0090 $ 78.50

Name Plate Cast Alloy “ Land Rover Defender 110 NAS” .........................RNA0110 $ 78.50

(800) 403 7591 roversnorth.com 59
RNB967 RNI565 RNQ205 RNF388 RNQ208 RNQ209 PLQ209SER PLF700A RNA0090 RNA0110 RNA0113 Exterior Misc. Land Rover Special Vehicles Sticker 4”x 2”..................................................RNF364 $ 5.99 Recovery Point Location RNA1248 $ 1.50 Decal Union Jack 2.85” x 4.375” RNA1237 $ 4.95 Land Rover GB Oval Sticker RNF388 $ 5.75 Sticker, “The Best 4 x 4 x Far”, for outside of window PLA695 $ 4.95 First Aid Kit On Board RNA1242 $ 2.49 Recovery Vehicle RNA1243 $ 2.69 Rovers North Expedition RNA1244 $ 2.99
RNC161
Door Top Lock, LH Defender, Genuine RNQ208 $ 5.87
Door Top Lock, LH Defender, ProLine PLQ208 $ 4.99
Door Top Lock, RH Defender, Genuine RNQ209 $ 5.58
Door Top Lock, RH Defender, ProLine PLQ209 $ 4.99
RNH873 RNI566 RNI561 RNQ183 RNC924 PLE331 PLE332 RNQ181 RNQ189 Front - Grille, Bonnet, Wing, Continued... RNE457 RNA1248 RNA1237 RNF364 PLA695 RNA1242 RNA1244
60 roversnorth.com Fits: Defender, Discovery I, RRC 16” x 6.5”, 2-3/4” offset, Black. Genuine RNW216 $ 227.69 Ea Alloy Wheels Below: Land Rover sponsored Tuareg Rallye Bowler Wildcat with Blindo wheels Kahn o ers wheels for Range Rover, Range Rover Sport, Evoque, Velar, LR3, LR4, Discovery and Discovery Sport. Please contact us for more information. MONDIAL ALLOY 20x9” 20x9” Black Uses original factory wheel nuts and 47mm hub caps. COS20712 $ 799.00 Ea. RS DEFEND ALLOY 18x8” 18x8” Black 265/65-R18 Tires, direct fit, uses original factory wheel nuts and 47mm hub caps. COS18712 $ 773.06 Ea COS20712 GENUINE PARTS RNW216 COS18712 NEW H MAXTRAC BLINDO ALLOY RIM 16 x 7” Black, PCD 5x165.1, Offset ET15. Fits: 1984-2016 Defender, Discovery I, Range Rover Classic. RNA2489 $ 459.00 Ea RALLY TESTED TOUGH

Genuine RNH565 $ 13.13 Discovery II, RRP38A Stainless capped wheel nut, ProLine ..................PLH565 $ 5.95

Lug Nut Alloy Wheel 2008 on, LR4, L322, L320, Genuine RNX841 $ 12.24

Lug Nut Alloy Wheel 2008 on, LR4, L322, L320, ProLine PLX841 $ 4.50

Lug Nut Alloy Wheel 2008 on, LR4, L322, L320, Black, ProLine PLX841B $ 11.59

8. Cap, Alloy Wheel Bright Black, Genuine (47mm), each RNQ170 $ 17.65 Cap, Alloy Wheel Bright Black, ProLine (47mm), each PLQ170 $ 10.99 9. Cap, Alloy Wheel Bright Black, Genuine (47mm), Set of 4 RNY036 $ 65.14 10. Cap, Polished Green/Silver, Genuine (47mm), Each RNS865 $ 18.34 11. Cap, Satin Aluminum, Genuine, Each RNX227 $ 17.64 “BEST IN THE WORLD. FIVE STARS” -Chip, USA (800) 403 7591 roversnorth.com 61 Dual Finish Five-Spoke Alloy - Each, 16 x 7, Genuine 6. Sawtooth Style Alloy Wheel, Black - Set of 5, 16 x 7 Sawtooth Style Alloy Wheel, Black - Each, 16 x 7, ProLine PLS842 $ 259.00 Sawtooth Style Alloy Wheel, Black - Set of 5, 18 x 8, ProLine PLS842-185 $ 1499.00 Sawtooth Style Alloy Wheel, Black - Each, 18 x 8, ProLine PLS842-18 $ 319.00 7. Boost Five-Spoke Alloy Black - Set of 5, 16 x 7, ProLine PLS862B-5 $ 1159.00 Boost Five-Spoke Alloy Black - Each, 16 x 7, ProLine PLS862B $ 249.00 8 10 11 2. Cap, Wheel Center Pewter, Genuine, Each RNH675 $ 14.88 3. Cap, Silver Sparkle, Genuine, Each RNC875 $ 14.99 2 3 75mm dia. hub caps Lug Nuts for Steel Wheels Early Series I-IIA Lug Nut, 15/16” ProLine 1.29 Series III, Defender, Discovery I, RRClassic 4.49 Series III, Defender, Discovery I, RRClassic, ProLine, Each 1.29 Locking Wheel Nuts, Steel Wheels, Genuine 119.95 Locking Wheel Nuts, Steel Wheels, ProLine PLW221 $ 49.95 Discovery II, RRP38A Steel Wheel Nut, Genuine RNQ821 $ 9.98 Discovery II, RRP38A Steel Wheel Nut, ProLine PLQ821 $ 5.99 12. Defender, Discovery I, RRC, Genuine .............................................RNX021 $ 8.35 Defender, Discovery I, RRC, ProLine PLX021 $ 1.95 13. Defender, Genuine RNE186 $ 11.60 Defender, ProLine PLE186 $ 2.95 14. Series II, IIA, III, Black, ProLine PLA953 $ 2.59 Hub Caps for Steel Wheels 14 13 PLW221 12
Discovery I, RRC Stainless, Genuine RNX043 $
Discovery I, RRC, Stainless, ProLine PLX043 $
Discovery
RRC, Black, ProLine PLX043B
Wheel Nuts Set of 5, Alloy Wheels, Genuine
Wheel Nuts, Genuine
II, RRP38A Stainless capped wheel nut,
Defender,
19.95 Defender,
8.44 Defender,
I,
$ 13.95 Locking
RNW219 $ 169.28 Chrome Cover, Locking
RND706 $ 5.31 Discovery
Nuts for
Wheels Road Wheels Fits: Series II, IIA, III, D90, D110 ‘83-2016 (except NAS 110). 16” x 5.5” 1-7/8” offset. Black, Genuine ..............RNJ726 $ 185.00 Ea Black, ProLine PLC880 $ 189.00 Ea Limestone, ProLine RNC766L $ 279.95 Ea Alpine White,ProLine RNC880A $ 269.95 Ea Diamond Turned Alloy Wheels 1. Set of 5, 16 x 7, ProLine RNA5012-5 $ 1899.00 Each, 16 x 7, ProLine..........................................RNA5012 $ 431.57 Set of 5, 18 x 8, ProLine RNA5013-5 $ 1999.00 Each, 18 x 8, ProLine RNA5013 $ 503.67 Wheels do not include hub caps or lug nuts. Alloy Wheels for Range Rover Classic, Defender, Discovery I 9 PLX043B RND706 PLA938 RNS066 RNJ726 Steel Wheels for Series, Defender, Range Rover Classic & Discovery I RNC880A 47mm diameter hub caps fit alloy wheels shown above in blue 6 5
Lug
Alloy
62 roversnorth.com The Source for Classic Land Rover Parts Defender Folding Rear Step Kits Rear Folding Step Kit, Defender, Genuine RNF368 $ 298.95 Rear Folding Step Kit, Defender, ProLine PLF368 $ 74.95 Replacement Rubber Mat, Rear Folding Step, Genuine RNE302 $ 46.79 PLC768 PLB066 Defender 110 Side Runner Set Defender 110 Side Runner Set, Black, Genuine RNQ686 $ 1299.95 Defender, Series Side & Rear Steps RNF368 RNF368 Defender 110 Side Runner Set Defender 110 Station Wagon, Side Step, Pair Black, ProLine PLB069 $ 799.00 Replacement Plastic End Cap Set Complete end cap replacement set for PLB066, PLB069 RNA066SET $ 36.00 RNA066SET PLB069 RNQ686 Replacement Plastic End Cap Set Complete end cap replacement set for PLB066, PLB069 RNA066SET $ 36.00 Defender Folding Side Step Kits Side Folding Step Kit, Defender, Genuine RNF367 $ 279.90 Side Folding Step Kit, Defender, ProLine PLF367 $ 119.50 Replacement Rubber Pad For Side Step, 2007 on, Genuine RNE300 $ 49.78 RNF367 RNF367 Series II, IIA, III Side Step Fits all 88 and 109 Series II III ProLine PLC768 $ 144.00 Defender 90 Side Runner Set Twin Tubular Side Runners, sold as a pair, made with black powder-coated tubular construction and plastic tread surfaces. Supplied with hardware and instructions. OEM. Made in the UK, ProLine PLB066 $ 769.00 Replacement Rubber Pad Genuine RNC222 $ 35.51 Defender New Style Folding Side Step Fits Series, Defender, Genuine RNS588K $ 319.95 RNS588K NEW H

Defender Winch Bumper with Round LED Lights

Our most popular styled Defender winch bumper, built for demanding off-road use. Features improved approach angle, easy winch access, dual recovery ports for either jack adapter or swivel shackle, compatible with RN skid plates. Designed for a wide range of winches using the common Warn 9 bolt pattern. To ensure it stays good looking year after year without rust, each bumper is first etched, then hot dipped galvanized before its final Satin black powder coat finish is applied. Adjustable round LED daytime running light set is included with bumper. Made in the UK for Rovers North. Winch Bumper with round LED Lights RNA2109 $ 559.00 Brush Bar for Defender Winch Bumpers .............RNA2012

Rear Bumpers

Defender Rear Step & Tow Bumper with Class III

Receiver

Tubular construction that bolts directly to Defender chassis rear crossmember. Includes 90 and 110 mounting brackets, rubber tread plate and mounting hardware with instructions. Features built-in re ceiver for standard 2” Class III tow hitch. Superior corrosion-resistant finish features hot dipped galvanizing with a durable Satin black powder coat top finish for years of corrosionfree service. This XD model is identi cal to our NAS style rear step bumper PLB064 except it is made with .375” larger diameter tubing for improved protection and updated appearance. Made in the UK for Rovers North. Fits: Defender 1983 and 110 models except High-Capacity Pick Up.

(800) 403 7591 roversnorth.com 63 Defender Front Winch Bumpers ULTIMATE FINISH GALVANIZED + POWDERCOATED PLB064XD
Defender
Now available in an XD version with larger diameter tubing for improved protection and updated appearance. Standard NAS Style Bumper PLB064 $ 739.00 XD NAS Style Bumper .....................PLB064XD $ 739.00
Rovers North Standard Duty Winch
RNA2116 $
RNA2116
$ 399.00 RNA2109 RNA2012
Bumper
479.00

Front Skid Plates

Made from solid 10mm-thick aluminum alloy for the best protection on the market. Available in silver or black with powder coated black, galvanized steel brackets. Our skid plates are strong and durable, without the weight or corrosion of steel. Designed to protect your steering from off-road hazards. Works well in combination with our Differential Guards and winch bumpers. Fits both RHD and LHD. Made in the UK for Rovers North.

Defender, 10mm solid aluminum alloy, all models, Natural Silver ..............................RNA4113 $ 419.00

Defender, 10mm solid aluminum alloy, all models, Black RNA4113B $ 419.00 Discovery II, 8mm solid aluminum alloy, NAS V8 models 1999-04, Natural Silver RNA4115 $ 349.00

Weld-On Differential Cover w/Fill Hole

Easy-to-install weld-on replacement cover. Ideal for rusted out or damaged housings. Simply cut off the old housing and weld on this identical cover without having to remove your axle assembly from the vehicle. Fits all Series II, IIA, III, Defender, Range Rover Classsic and Discovery I front Land Rover style axles. (Will not fit front Salisbury or ENV type axles.)

Front Weld-on Cover

RNA0149 $ 95.68

Rear Weld-on Cover RNA0150 $ 71.07

Fuel Tank Guards

Defender 90 NAS Heavy Duty

Solid 10mm Thick Aluminum Fuel Tank Guard

RNAFTG01B

Replaces original sheet metal cradle. Serious off-road protection without the weight or corrosion of steel. Supplied complete with mounting hardware.

Defender NAS 90 original chassis 1994 1997.

RNAFTG01 $ 389.00

Defender NAS 90 original chassis 1994 1997, Black RNAFTG01B $ 419.00

Discovery II Galvanized steel

RNA9063 $ 189.00

Discovery I Galvanized steel, Requires slight modification of either the guard or the chassis. There is interference between the tubular support bars for the hitch. Best to notch out the guard for a perfect fit.

RNA9087 $ 249.95

Next Generation Differential Guards

Features a wraparound formed steel plate that offers full-impact and skid-over protection for extreme duty off-road. 6mm-thick steel separates this from other wraparound guards. Hot dipped galvanized for superior corrosion protection. Easy to install and easy to remove for complete service access. Includes mounting hardware. Made in the UK.

Front Series III, Defender 1983 2015, Range Rover Classic 1971 1995, Discovery I II 1993 2004

Rear Series III, Defender 90 ONLY 1985 2001, Range Rover Classic 1971 1995, Discovery I II 1993 2004

Rear Diff Guard Salisbury, 109 & 110 1972 1998

RNA0100 $ 109.99

RNA0101 $ 124.99

RNA0102 $ 89.95

Rear PUMA Style 110, 130, 2001 2015 and 110XD TUM ....................................................RNA0103 $ 119.95

Front Differential RNA0100 Standard Differential Guard DIFF01AA Rear Differential RNA0103 Skid Plates, Fuel Tank & Diff Guards Overland-Proven Protection
Hot dipped galvanized finish, 6mm, easy to install. Fits: Front and/or Rear. Discovery I, Defender (except rear 110), RRC DIFF01AA $ 59.95
RNA4113
Standard Differential Guards
GALVANIZED
RNA0101 GALVANIZED
RNA0100
64 roversnorth.com The Source for Classic Land Rover Parts
NEW H
Heavy-Duty Fuel Tank Guard

A Series IIA 109 SW Rear Body Lower Floor Mountings

1. Rear Panel RH Series II III, ProLine PLE310 $ 122.57

2. Rear Panel LH Series II III, ProLine PLE311 $ 122.57

3. Nut 5/16" UNF, Genuine RNS034 $ 2.75 Nut 5/16" UNF, ProLine PLS034 $ 0.55

4. Star Washer, Genuine ................................................................................RND151 $ 0.83

5. Plain Washer, Genuine 3966L $ POA

6. Shim Rear Body/Door Latch, Genuine RND149 $ 9.26 Shim Rear Body/Door Latch, ProLine PLD149 $ 1.48

7. Bolt 5/16" x 7/8", Genuine RNF283 $ 5.29

8. Floor Screw 1/4"x3/4", Genuine RNC689 $ 1.64 Floor Screw 1/4"x3/4", ProLine PLC689 $ 1.29

9. Washer 1/4" x 7/8" diameter, Genuine RNB998 $ 0.33

10. Lock Washer 1/4", Genuine RNX015 $ 0.95

11. Nut 1/4" UNF, Genuine RNB039 $ 0.94

Nut 1/4" UNF, ProLine PLB039 $ 0.31

Pad Rear Body Support Series &

0.65

28. Bolt 1/4" x 3/4", Genuine

RND141 $ 1.64

Bolt 1/4 x 5/8", Genuine RNQ757 $ 1.64 29. Washer 1/4" x 5/8" Diameter, Genuine RNF216 $ 0.87

Bracket Rear Body Series Pair, ProLine PLD152 $ 44.50 Bracket Rear Body Stay Set Aluminum, ProLine PLX859AS $ 63.50

Rear Floor 109 Station Wagon, ProLine PLY005 $ 835.00

Cover Panel Rear Lamp RH, ProLine PLX926 $ 22.50 Cover Panel Rear Lamp LH, ProLine PLX927 $ 22.50

Screw Self Tap #8 x 3/8", Genuine RNQ264 $ 0.83

Panel Series & Defender, ProLine PLB701 $ 0.46 21. Washer, Genuine RNB993 $ 0.81 22. Speed Nut Floor Panel Series & Def, Genuine .....................................RNB681 $ 3.10

Speed Nut Floor Panel Series & Def, ProLine PLB681 $ 0.45

23. Toe Panel 109 SW MID, Genuine RNX976 $ 416.44

Toe Panel 109 110 SW MID, ProLine PLX976 $ 314.00

24. Floor Middle 109/110 SW, ProLine PLX977 $ 248.50

25. Angle Bracket Rear Bed 109" SW, Genuine RND145 $ POA

26. Bed Rail Rear Body Series & Defender, Genuine RND147 $ 71.70

Bed Rail Rear Body Series & Defender Galvanized, ProLine PLD147G $ 72.00

27. Bolt 5/16" x 1", Genuine RNS059 $ 1.64

roversnorth.com 65 A
(800) 403-7591
16.
12. Rubber
Defender, Genuine RND148 $ 9.14 Rubber Pad Rear Body Support Series & Defender, ProLine PLD148-KIT $ 4.25 13. Seal Rear Panel Extension 109 & 110 SW, Genuine ..........................RNY014 $ 11.16 14. Body Panel 109" SW RH Series II IIA, ProLine PLE320 $ 99.95 Body Panel 109" SW LH Series II IIA, ProLine PLE321 $ 99.95 15. Pop Rivet 3/16"x 7/16", Genuine RNC690 $
Pop Rivet 3/16"x 7/16", ProLine PLC690 $ 0.38
Hammer Rivet 1/4" x 3/8", ProLine PLD153 $ 0.45 17. Pin 38mm Bed Crossmember Defender 110, Genuine RNY015 $ 0.89 18. Collar Bed Rail Fixing Pin Series & Def, Genuine RNS926 $ POA 19. Pop Rivet 3/16" x 7/8", Genuine RND154 $ 4.46 20. Screw Floor Panel Series & Defender, Genuine RNB701 $ 1.49 Screw Floor
Washer,
35. Screw 4 BA x 1/2", Genuine ......................................................................PLY016
36. Spring Washer 3/16, Genuine
37. Nut (2 BA), Genuine
38. Name Plate Cast Alloy Station Wagon,
Series IIA 109 SW Rear Body Lower Floor Mountings 1 31 3 4 7 25 2 38 30 11 10 15 16 13 17 26 18 12 19 15 24 23 28 29 10 11 27 6 4 3 22 21 20 8 9 10 11 4 3 34 33 32 37 36 34 35 5 6 15 Series IIA 109 SW Rear Body Floor PLX926 PLX928 Rear Lamp Cover Panels RH PLX926 $ 22.50 LH PLX927 $ 22.50 Series 88” Fuel Filler Cover PLX928 $ 48.50 Bed Rail Rear Body All Series, Defender, except HICAP, Genuine RND147 $ 71.70 Bed Rail Rear Body Galvanized PLD147G $ 72.00 Rubber Pad Rear Body Support Series, Defender, Genuine RND148 $ 9.14 Toe Panel Series 109 Station Wagon Mid Genuine RNX976 $ 416.44 ProLine PLX976 $ 314.00 Bed Rails Rear Body Series, Defender PLD152 Rear Body Stays Bracket Pair ProLine PLD152 $ 44.50 Bracket Rear Body Stay Set Aluminum Series 109 & 110, ProLine PLX859AS $ 63.50 PLX859AS
30.
31.
32.
33.
34.
Genuine RNF421 $ 0.83
$ 1.89
RNF432 $ 0.34
RNF215 $ 0.83
ProLine RNA0113 $ 79.50

A Defender Front Door Shells and Assembly

1.

Door Shell Assem, RH Front Defender 1986-2004, Genuine RNH727 $ 1045.32

Door Shell Assem, RH Front Defender 1986-2004, ProLine PLH727 $ 695.00

Door Shell Assem, LH Front Defender 1986-2004, Genuine RNI760 $ 1045.32

Door Shell Assem, LH Front Defender 1986-2004, ProLine PLI760 $ 695.00

Door Shell RH Front Defender 2005-2016, Genuine RNM182 $ 1133.45

Door Shell LH Front Defender 2005-2016, Genuine RNM183 $ 1133.45

2. Bracket Front Door Trim Defender, Genuine RNN485 $ 56.70

3. Screw, M6 x 16mm, Genuine RNB038 $ 1.94

4. Washer, Shake Proof, Genuine RNN486 $ 1.64

5. Insulator Door Panel Defender, Genuine RNN487 $ 33.24

6. Splash Shield Front Door LH/RH Defender, Genuine................RNN488 $ 17.91

Water Shedder RHF Door Defender, Genuine RNM184 $ 26.51

Water Shedder LHF Door Defender, Genuine RNM185 $ 26.51

Splash Shield LHF Door Defender, Genuine RNN490 $ 32.36

7. Inner Panel LHF Door Defender, Genuine RNN494 $ 772.57

Inner Panel RHF Door Defender, Genuine RNN497 $ 116.66

Inner Panel LHF Door Defender, Genuine RNN498 $ 121.13

8. Screw 6m x 10mm Flanged Head, Genuine RNN477 $ 2.41

9. Plain Washer 6mm I.D., Genuine RNX034 $ 2.79 Plain Washer 6mm I.D., ProLine PLX034 $ 0.39 10. Filler Door Glass Rear Corner Defender 110 SW, Genuine RNN499 $ 23.28 11. Filler Door Glass Front Corner Defender, Genuine RNN500 $ 12.81 12. Filler Strip Door Glass Vertical Defender, Genuine ..................RNN501 $ 12.56 13. Filler Strip Front Door Top Defender, Genuine RNN502 $ 8.46 14. Filler Strip RHF Window Defender, Genuine RNN503 $ 8.46 Filler Strip LHF Window Defender, Genuine RNN504 $ 15.29

Window Seal Inner Front Door Glass Defender, Genuine RNN505 $ 51.97 16. Seal Waist Outer Front Door Defender, Genuine RNN506 $ 30.92 Seal Waist Outer Front Door Defender, ProLine PLN506 $ 14.69 17. Deflector RHF Door Defender 90, 110, Genuine RNN507 $ 161.61

Deflector LHF Door Defender 90, 110, Genuine RNN508 $ 161.61 18. Bracket LHF Door Check Arm Defender, Genuine RNM187 $ 39.98

Bracket RHF Door Check Arm Defender, Genuine RNM186 $ 39.98 19. Water Shedder Door Latch, Defender 90, 110, Genuine RNM177 $ 5.42

20. Door Assembly LH Front Defender 1999-2016 DFD03L $ 3459.95

Door Assembly RH Front Defender 1999-2016 ............................DFD03R $ 3459.95

Door Frame Repair Section Defender CHAS50 $ 54.00

B Defender 110 Middle Door Shells and Door Assembly

1. Door Shell RH Middle Defender 1987 2004, Genuine RNH464 $ 1228.15

Door Shell RH Middle Defender 1987 2004, ProLine PLH464 $ 669.00

Door Shell LH Middle Defender 1985 2004, Genuine .....................RNH465 $ 1228.15

Door Shell LH Middle Defender 1987 1998, ProLine PLH465 $ 669.00

Door Shell RH Middle Defender 2005 2016, Genuine RNM156 $ 1096.96

Door Shell LH Middle Defender 2005 2016, Genuine RNM157 $ 1096.96

2. Block Foam Windscreen, Genuine RNM178 $ 14.27

3. Water Shedder RH Rear Door Defender 110 SW (from VIN 5A689037 on), Genuine RNM161 $ 21.69

Water Shedder LH Rear Door Defender 110 SW (from VIN 5A689037 on), Genuine RNM162 $ 42.65

Splash Shield LH Rear Door Defender 110 SW, Genuine RNM160 $ 45.14

Curtain Water Defender (to VIN YA191861), Genuine RNM158 $ 28.01

4. Inner Panel LH Rear Side Door Defender 110 SW (w/central Lock from VIN# LA932487 to 1A622423 and from VIN# 5A689037 on), Genuine RNM167 $ 172.67

Inner Panel RH Rear Side Door Defender 110 SW (w/Central Lock from VIN# LA932487 to 1A622423 and from VIN# 5A689037 on), Genuine RNM179 $ 172.67

Inner Panel RH Rear Door, Defender 110 SW (Less Central Locking from VIN# 2A622424 on), Genuine RNM165 $ 120.35

Inner Panel LH Rear Door, Defender 110 SW (Less Central Locking from VIN# 2A622424 on), Genuine RNM166 $ 120.35

Panel RH Rear Door Inner Defender 110 SW (From VIN# FA358427 to LA932486),

Waist Seal RH Middle Door Outer Defender 110 SW, ProLine PLM172 $ 12.50

12. Deflector Panel RH Rear Door Defender 110 SW, Genuine RNM173 $ 184.91

Deflector Panel LH Rear Door Defender 110 SW, Genuine RNM174 $ 184.91 13. Shedder-Water RH Middle Door Defender 110 SW, Genuine RNM175 $ 28.87

Shedder-Water LH Middle Door Defender 110 SW, Genuine RNM176 $ 22.78

66 roversnorth.com The Source for Classic Land Rover Parts Defender Doors
Genuine RNM163
Panel LH Rear Door Inner Defender 110 SW (From VIN# FA358427
Genuine RNM164 $ 207.18 5. Bolt M6 x 16mm, Genuine RNF533 $ 2.75 6. Plain Washer 6mm I.D., Genuine RNX034 $ 2.79 Plain Washer 6mm I.D., ProLine ...........................................................PLX034 $ 0.39 7. Filler Door Glass Rear Corner Defender 110 SW, Genuine RNN499 $ 23.28 8. Filler Strip Door Glass Vertical Defender, Genuine RNN501 $ 12.56 9. Filler RH Rear Door Top Window Defender 110 SW, Genuine RNM168 $ 23.67 Filler LH Rear Door Top Window Defender 110 SW, Genuine RNM169 $ 23.67 10. Waist Seal Inner Rear Side Door Defender 110 SW, Genuine RNM170 $ 91.69 Waist Seal Inner Rear Side Door Defender 110 SW, ProLine PLM170 $ 29.50 11. Waist Seal LH Middle Door Outer Defender 110 SW, Genuine RNM171 $ 48.15 Waist Seal LH
$ 207.18
to LA932486),
Middle Door Outer Defender 110 SW, ProLine PLM171 $ 12.69 Waist Seal RH Middle Door Outer Defender 110 SW, Genuine RNM172 $ 47.79
B A
15.
Defender 110 Middle Doors
Defender Front Doors

14. Water Shedder Door Latch, Defender 90, 110, Genuine RNM177 $ 5.42

15. Channel, LHR Door Check Rod, Defender 110 SW, Genuine RNX118 $ 104.67

Channel, RHR Door Check Rod, Defender 110 SW, Genuine RNX117 $ 26.36

16. Door Assembly LH Middle Defender 1999-2016 DMD03L $ 3998.95

Door Assembly RH Middle Defender 1999-2016 DMD03R $ 3998.95

C Defender Front Two-Piece Door

1. Door Top RH Dual Sliding Defender, Genuine RNC835 $ 1387.55

Door Top RH Dual Sliding Defender, ProLine PLC835 $ 839.00

Door Top LH Dual Sliding Defender, Genuine RNC834 $ 1387.55

Door Top LH Dual Sliding Defender, ProLine PLC834 $ 839.00

Arm Rest Set, Door Top NAS Defender, ProLine RNA0219 $ 249.00

2. Rail RHF Door Top Slide Defender 90/110, Genuine RNH421 $ 212.43

Rail LHF Door Top Slide Defender 90/110, Genuine .........................RNH422 $ 122.14

Seal Draught Rail Door Top NAS 90, Genuine RNH423 $ 17.32

4. Screw #6 x 3/8" Self Tapping, Genuine RNC790 $ 0.81

5. Slide RHF Door Top Glass Outer Defender, Genuine RNH425 $ 125.55

6. Slide RHF Door Top Glass Inner Defender, Genuine RNH427 $ 33.08

Slide LHF Door Top Glass Inner Defender, Genuine RNH428 $ 33.08 7. Runner Block, Door Top Defender 90/110, Genuine RNH429 $ 6.83 8. Glass Door Top Dual Sliding Outer Defender Clear, Genuine RNH641 $ 97.48 9. Glass Door Top Dual Sliding Inner Defender Clear, Genuine RNH642 $ 58.00

10. Finger Pull RH Outer Defender Door Top, Genuine RNH432 $ 7.55 Finger Pull LH Outer Defender Door Top, Genuine RNH433 $ 7.55 11. Finger Pull RH Inner Defender Door Top, Genuine RNH434 $ 16.02 Finger Pull LH Inner Defender Door Top, Genuine ...........................RNH435 $ 16.02 12. Glazing Rubber Door Top Defender 90, Genuine RNH436 $ 13.95 13. Glazing Felt Door Panel Defender 90, Genuine RNH508 $ 56.34 14. Draught Rail RH Inner Glass Defender Door Top, Genuine RNH437 $ 43.72 Draught Rail LH Inner Glass Defender Door Top, Genuine RNH438 $ 123.67 15. Seal Draught Rail Door Top Defender, Genuine RNH439 $ 16.37 16. Infill Rubber Door Top Defender, Genuine RNH440 $ 11.94 17. Latch Assy Front RH Window Defender, Genuine RNH441 $ 396.06 18. Control Knob Door Top Defender, Genuine RNH443 $ 68.90 20. Stud Door Top Door Bottom Defender, Genuine RNH445 $ 16.86

Stud Door Top Door Bottom Defender, ProLine PLH445 $ 14.75

Serving Land Rover Owners with high-quality parts at low, competitive prices (800) 403-7591 roversnorth.com 67
Defender Doors C
21. Seal
22.
23.
24.
25.
26.
PLI760 PLH465 RNM165 RNM174 RNM185 RNM186 GENUINE PARTS
Door Top To Bottom Defender, Genuine RNH446 $ 46.19
Sealing Pad Door Top Defender 90, Genuine RNH447 $ 19.95
Sealing Pad Door Top Defender 90, Genuine ..................................RNH448 $ 16.09
Flange Nut M10, Genuine RNE158 $ 0.95 Door Top Speednut Aluminum 10mm Defender SPDNUT2 $ 69.50
Spacer Tube Door Top Defender, Genuine RNH449 $ 22.41
Door Bottom RH Front NAS 90 1995 97, Genuine RNH634 $ 880.38 Door Bottom RH Front Late, ProLine PLH634 $ 349.00 Door Bottom LH Front Late, ProLine PLH635 $ 349.00 27. Capping RH Front Door Bottom, Series, Galvanized, Genuine RNE532 $ 43.72 Capping LH Front Door Bottom, Series, Galvanized, Genuine RNE533 $ 47.92 28. Pop Rivet 3/16"x 9/16", ProLine PLC690 $ 0.38 Rivet 3/16"x 7/16", Genuine RNC690 $ 0.65 Defender Front Two-Piece Doors

A

A

Series Doors

Land Rover Series II, IIA, III Front Door and Hinges

Land Rover Series II, IIA, III Front Door and Hinges

1. Door Top Frame RH Series II–IIA, ProLine PLX873N $ 90.00

Door Top Assembly With Glass Series IIA 1959-1971 RH, ProLine PLX873 $ 229.95

Door Top Assembly With Glass Series IIA 1959-1971 LH, ProLine PLX874 $ 229.95

Door Top Frame LH Series II IIA, ProLine PLX874N $ 90.00

Door Top Frame LH SER II III, ProLine PLB951 $ 89.00

Door Top LH Dual Sliding Defender, Genuine RNC834 $ 1387.55

Door Top LH Dual Sliding Defender, ProLine PLC834 $ 839.00

Door Top RH Dual Sliding Defender, ProLine PLC835 $ 839.00

Door Top RH Dual Sliding Defender, Genuine RNC835 $ 1387.55

Door Top Assembly RH Series II III Clear Glass, Genuine RNE323 $ 606.41

Door Top Assembly With Glass Series III 1972-1984 RH, ProLine PLE323 $ 195.00

Door Top Assembly With Glass Series III 1972-1984 LH, ProLine ...PLE325 $ 195.00

2. Window Track - Front Door Top Series II, IIA & III, Genuine RNB860 $ 5.81

Window Track - Front Door Top Series II, IIA & III, ProLine PLB860 $ 4.11

3. Window Track - Vertical Front, Middle & Roofside, Genuine RNB861 $ 4.47

Window Track - Vertical Front, Middle & Roofside, Proline PLB861 $ 4.22

4. Window Track Door Top Lower Series II, IIA & III, Genuine RNB948 $ 7.92

Window Track Door Top Lower Series II, IIA & III, ProLine PLB948 $ 6.12

5. Vertical Seal Door Top Series IIA & III, ProLine .................................PLB742 $ 3.85

6. Retainer - Vertical Seal - Series IIA & III, ProLine PLB743 $ 6.29

7. Rubber Stop For Series Door Top Sliding Glass, ProLine PLB724 $ 2.96

8. Glass Door Top Clear Sliding Series II III, Genuine RNE317 $ 132.57

Glass Door Top Clear Sliding Series II III, ProLine PLE317 $ 32.50

9. Glass Front Door Top Clear Fixed Series, ProLine PLE316 $ 29.50

10. Door Seal - Front Door Roof - Series IIA & III, Genuine RNC120 $ 23.22

Door Seal Front Door Roof Series II, IIA & III, Proline PLC120 $ 28.00

11. Door Seal Door Top Front Series IIA & III, ProLine PLC119 $ 26.00

12.

Door Seal Top Rear Series II III, Genuine RNC121 $ 22.95

Door Seal Top Rear Series II, IIA & III, ProLine PLC121 $ 22.95

13. Door Seal Front Bottom RHF, Genuine RNC114 $ 32.15

Door Seal RHF Door Bottom Front Series II, IIA & III, ProLine PLC114 $ 37.40

Door Seal LHF Door Bottom Front - Series II, IIA & III, Proline ........PLC115 $ 41.53

14. Door Seal Front Door Sill Series II, IIA & III, Genuine RNE276 $ 37.83

Door Seal Front Door Sill Series II III, ProLine PLE276 $ 25.50

15. Door Seal RHF Door Bottom Back Series II, IIA & III, ProLine PLC117 $ 54.75

Door Seal LHF Door Bottom Back Series IIA & III, Genuine RNC118 $ 45.94

Door Seal LHF Door Bottom Back Series II, IIA & III, ProLine PLC118 $ 49.95

16. Rivet 3/16" x 7/16", Genuine RNC690 $ 0.65

Pop Rivet 3/16" x 9/16", ProLine PLC690 $ 0.38

Hammer Rivet - Door Seal, Genuine RNC691 $ 3.42

17. Door Bottom RH Front, Genuine RNC836 $ 907.41

Door Bottom RH Front Series III No Hole, ProLine PLC836 $ 246.17

Door Bottom RH Front Series III 1972-1984 w/Key Hole, Proline PLC836H $ 246.17

Door Bottom LH Front, Genuine ...............................................................RNC837 $ 907.41

Door Bottom LH Front Series III 1972 1984, ProLine PLC837 $ 246.17

Door Bottom LH Front Series III 1972 1984 w/Key Hole, ProLine PLC837H $ 246.17

Door Bottom RH Front Series II IIA Front Right 1959-’71, ProLine PLN341 $ 215.00

Door Bottom LH Front Series II IIA 1959-’71 w/o Key Hole, ProLine PLN342 $ 215.00

18. Capping RH Front Door Bttm-Series & Defender Galv., Genuine RNE532 $ 43.72

Capping LH Front Door Bttm-Series & Defender Galv., Genuine RNE533 $ 47.92

19. Seal Door Top/Bottom Series II, IIA & III, ProLine PLB725 $ 5.55

20. Door Hinge RH Front Upper, Genuine RNI763 $ 72.64

Door Hinge RH Front Upper, ProLine PLI763 $ 20.95

Door Hinge LH Front Upper, Genuine RNI764 $ 72.87

Door Hinge LH Front Upper, ProLine PLI764 $ 20.95

Hinge Lower RH & Rear Series & Defender, Genuine RNC916 $ 76.89

Door Hinge Bottom RH & Rear Door Ser/Defender, ProLine ............PLC916 $ 29.95

Door Hinge LH, Genuine RNH971 $ 84.11

Door Hinge LH, ProLine PLH971 $ 21.00

Door Hinge RH, Genuine RNX091 $ 84.77

Door Hinge Rebuild Kit DHK111 $ 4.25

21. Bolt Hinge-Door 5/16 UNF Series & Defender, Genuine RNE258 $ 3.99

22.

23.

Hinge Bolt Series III Door, ProLine PLE258 $ 0.81

Bolt - 5/16" X 7/8", Genuine RNF283 $ 5.29

Bolt Hinge-Door Post Series III & Defender, Genuine RNC704 $ 4.27

Bolt Hinge-Door Post Series III & Defender, ProLine PLC704 $ 1.29

Shim Door Hinge-Bulkhead Series III & Defender, Genuine RNB945 $ 5.67

Shim Door Hinge-Bulkhead Series III & Defender, ProLine PLB945 $ 1.02 24.

Captive Nut Door Post Series & Defender, Genuine ..........................RNE256 $ 6.25

Captive Nut 5/16-24 Door Post Series Defender, ProLine PLE256 $ 1.39

Fixed Nut M8 Door Post, Genuine RNI768 $ 9.99

Fixed Nut M8 Door Post, ProLine PLI768 $ 1.55 25. Nut 5/16" UNF, Genuine RNS034 $ 2.75 Nut 5/16"

68 roversnorth.com The
for Classic Land Rover Parts
Source
UNF, ProLine
$
26. Nylon Washer - Hinge Bolt, Genuine
$ 0.94 Nylon Washer Hinge Bolt, ProLine
$
27. Stainless Screw Window Track Bag Of 20
$ 3.95 28. Washer - Accel Linkage, Genuine
$ 0.83 29. Lock Washer - 7/16", Genuine
$ 0.94 30. Nut - 7/16" UNF, Genuine
$
31. Door Seal Kit RH Front Series II III, ProLine
$
Door Seal Kit LH Front Series II III, ProLine .........................................PLK831
Top Speednut Aluminum 7/16" Series
PLS034
0.55
RNE255
PLE255
0.79
WTSCREW
RND276
RND277
RND278
2.41
PLK830
174.95
$ 174.95 Door
SPDNUT1 $ 69.50
Kit
Genuine Door Hinge
D90 & Series 88 RNK8060 $ 329.95
Pro Line Door Hinge Kit D90 & Series 88, ProLine PLK8060 $ 109.99
Pro Line Door Hinge Kit D110 Series 109 SW, ProLine PLK8061 $ 297.50
Genuine Door Hinge Kit D110 & Series 109 SW RNK8061 $ 769.95
Hinge Hardware Kit Original Hardware For Original Hinge RNK170 $ 27.95

Hinge Hardware Kit Original Hardware For New Hinge RNK171 $ 29.99

Hinge Hardware Kit New Hardware For Original Hinge RNK172 $ 18.55

Hinge Hardware Kit New Hardware For New Hinge RNK173 $ 20.75

Door Seal Kit LH Front Series II III RNK831 $ 169.00

Door Seal Kit RH Front Series II III RNK830 $ 169.00

Arm Rest Set Door Top Series II & III RNA0212 $ 168.00

Door Frame Repair Kit Front & Rear Door CHAS24 $ 89.95

Window Track Kit Front Series II III, ProLine

$ 14.95

Window Track Kit Front Door Top: Series II III RNK801 $ 13.95

Window Track Kit - Series II-III 88" Vehice Set RNK8011 $ 125.95

“Greetings from Venezuela, number one store in USA “ -Ipg, Venezuela (800) 403-7591 roversnorth.com 69
.......................................PLK801
Series Doors PLX874 RNK8060 SPDNUT1 PLB951 PLE317 PLB725 RND276 RND277 RND278 RNE533 PLI764 PLN342 PLN342 Genuine Door Hinge Kit, Defender 90 and Series

Defender Puma-Style Front Seat Set

The Puma-style Defender front seat assembly from Exmoor Trim features a larger and more comfortable seat back and head rest assembly. Includes removeable seat base, adjustable seat frame, adjustable headrest and reclining back with pocket. Also includes back and bottom seat heaters with wiring loom and switches. Sold as a Set. Fits: Defender 1984 2016

Defender Standard Front Seats

Fitted as standard equipment from 1983 to 2006. Supplied complete with adjustable frame, removable seat base, adjustable headrest, reclining seat back with rear pocket. Fits: Defender 1984 2016.

RNF503

Seat Mechanism Cover, RH, Genuine RNI298 $ 66.62

Seat

Seat

Seat

Front

Front

Front LH, Black Vinyl

EXT304-BV $ 679.00 Ea RH, Black Vinyl EXT303-BV $ 679.00 Ea LH,

70 roversnorth.com The Source for Classic Land Rover Parts
Mechanism Cover, RH, ProLine PLI298 $ 15.90
Mechanism Cover, LH, Genuine RNI297 $ 66.62
Mechanism Cover, LH, ProLine PLI297 $ 15.90
Seat Recline Lever Knob, Genuine RNF503 $ 17.18
Replacement Seat Mechanism Parts Additional bespoke trim choices are available, please inqure Series I, II, III Defender
Seat Recline Lever Knob, ProLine PLF503 $ 8.31 RH, RNI298
Defender Standard Front Seats in Car Denim NAS Style Heated Set
Dark Grey Vinyl EXT304-DGV $
Ea RH, Dark Grey Vinyl EXT303-DGV $
Ea LH, Twill Vinyl EXT304-DT $
Ea RH, Twill Vinyl EXT303-DT $
Ea Front Pair, XS 1/2 Leather - Black Rack, Heated EXT338-XSBRH $
Pair Front Pair, Car Denim NAS Style Set, Heated EXT338-NASH $
Pair Front Pair, Camel Vinyl, Heated ....................................................EXT338-CMLH $
Pair Front Pair, Denim Twill, Heated EXT338-DTH $
Pair Front Pair, Black Leather, Heated EXT338-BLH $
Pair Defender Complete Front Seat Bottom Cushions Twill Vinyl bottom cushion, Driver/Passenger, ProLine $ 159.00 Car Denim NAS bottom cushion Driver/Passenger, ProLine PLF495 $ 159.00 Dark Grey Vinyl bottom cushion Driver/Passenger, Exmoor EXT310-DGV $ 125.66 Black Vinyl, Driver/Passenger, Exmoor EXT310-BV $ 125.66 Denim Twill, Exmoor EXT310-DT $ 119.91 Price includes matching pair of front seats with seat heaters installed Oxford Tan Front Seat Set with heaters installed EXT308-CFOT $ 2234.99 Cover LH PLI297 $ 15.90 Knob Recline Lever PLF503 $ 8.31 Cover RH PLI298 $ 15.90 Twill Vinyl .................................................................................................EXT308-DT $ 1795.00 Pair XS 1/2 Leather - Black Rack EXT308-XSBR $ 1995.00 Pair Black Leather EXT308-BL $ 2231.25 Pair Oxford Tan EXT308-CFOT $ 2234.99 Pair Seat Riser Set RNA872 $ 94.29 PLF495 Green Vinyl Elephant Hide Vinyl Dark Grey Vinyl Black Vinyl Oxford Tan Vinyl Camel Vinyl Diamond White Vinyl Black Vinyl Vault Black Vinyl Vault Diamond Black Leather Black Span Mondus Classic Flute Black Leather Classic Flute Camel Vinyl Classic Flute Black Vinyl Classic Flute Bespoke Leather Techno Diamond Black Twin Stitch Vinyl Diamond Black Leather White Stitch G4 Vinyl XS Black Rack Leather Black Leather Diamond XS Leather Diamond Black Vented Vinyl Dark Grey Vinyl Denim Twill Vinyl NAS Car Denim Vinyl Classic Flute Oxford Tan Vinyl Oxford Tan Vinyl Vault Classic Flute Oxford Tan Vinyl RNA872 See Harris Tweed and Chestnut Leather above EXT338-NASH Defender Premium Heated Front Seat Sets PUMA Oxford Tan Vinyl Harris Tweed Harris Tweed Black Leather EXT307-PREMBL $ 3098.74 Pair Black Vinyl EXT307-PREMBV $ 1958.35 Pair Diamond XS Leather EXT307-PREMDXSL $ 3318.17 Pair G4 Fabric EXT307-PREMG4 $ 2280.98 Pair Harris Tweed EXT307-PREMHAR $ 3990.00 Pair Black Vinyl Vault EXT307-PREMVLT ............$ 2999.99 Pair Oxford Tan Vinyl Vault EXT307-PREMVLTOT $ 2999.99 Pair XS Black Rack EXT307-PREMXSBR $ 2515.04 Pair EXT307-PREMHAR
679.00
679.00
679.00
679.00
1579.00
1560.10
1849.99
1594.02
1881.99

Premium Cubby Boxes

Premium Loc Box Black Leather with USB charger socket, wiring loom Black Leather w/White Stitching Black Rack Half Leather ............................................................................EXT160-XSBR $ 639.00 Denim Twill Vinyl EXT160-DT $ 595.00 G4.... EXT160-G4 $ 639.00 Camel Vinyl EXT160-CML $ 682.54
Security Box Stereo Console This convenient 16-gauge steel security console has two compartments, a separate compartment for mounting a stereo, CB Radio, or other electronic equipment, and a lockable rear storage space lined with a rubber floor mat. The spacious rear compartment accommodates a CD changer, tools and other valuables. Includes drink holder and mounting package as shown. Fits all Defender models except automatic. Also fits Series II III. Tuffy Security Box Stereo Console, Black RNA1700 $ 394.95 Tuffy Security Box Stereo Console, Charcoal RNA1703 $ 389.95 Tuffy Drink Holder, Black RNA1704 $ 49.95 EXT160-BLWS RNA1700
The Premium XL Cubby will fit all Defender and Series. Available in various trims and comes with all fixings required. XS Black Rack EXT015PREM-XSBR $ 340.50 Black Leather/Black Stitching ......................................................EXT015PREM-BL $ 369.00 XS Black w/White Stitching EXT015PREM-XS $ 339.50 Black XS Vinyl w/Black Stitching EXT015PREM-XSBS $ 319.00 XS Deluxe Grey Vinyl w/G4 Grey Vinyl Center EXT015PREM-G4 $ 419.00 Oxford Tan Vinyl EXT015PREM-OT $ 319.00 Harris Tweed EXT024PREM-HAR $ 629.00 Black Leather w/Black Stitching EXT024PREM-BL $ 519.00 Black Vinyl Vault EXT024PREM-VLT $ 549.99 XS Black Rack EXT024PREM-XSBR $ 429.50 Black XS Vinyl w/Black Stitch EXT024PREM-XSBS $
Vinyl Oxford Tan Vault EXT024PREM-VLTOT $
Cup Holder Insert EXT015-2 $
EXT024PREM-VLT A full selection of leather, vinyl, fabric and stitching choices are available, please inquire. Cubby Boxes EXT015PREM-OT Defender Rear Air Conditioning Kits Companion kit for Rovers North Air Conditioning systems. Newly updated rear AC kit design. Fits: Defender 110 SW models. Tdi, Td5, V8, LHD RNAC1421 $ 4850.00 Tdi, Td5, V8, RHD RNAC1433 $ 4850.00 Puma 2.2, 2.4 LHD/RHD RNAC1420 $ 4850.00 RNAC1420 Cubby box and rear AC combined RNAC1420
Box
Vinyl EXT015-BV $
Black Leather
Black Span
Dark Grey Vinyl EXT015-DGV
Denim Twill EXT015-DT
EXT015-G4
Techno Cloth...........EXT015-TC $
XS Black Rack EXT015-XSBR $
EXT015-BV (800) 403-7591 roversnorth.com 71 “Excellent Perfect” - Nahuel, Argentina
Tuffy
379.00
549.99
27.99
Standard Cubby
Black
147.16
EXT015-FBL $ 394.03
Mondus EXT015-BSM $ 142.18
$ 147.16
$ 147.35
$ 156.99
142.71
145.82

Extreme Mk.II Hi-Back

Front Seat Assembly

The all new Extreme Mk.II Hi-Back offers Series owners the latest in front seat safety and comfort. Features include internal steel frame, enhanced side bolsters, twin stalk adjustable head rest and a large rear storage pocket. Available with optional heat and lumbar support for enhanced comfort. Will fit fixed or adjustable seat bases. Made to special order in the UK. Fits: Series II, IIA, III 88 & 109 front outer seat position, all models except Air Portable "Lightweight" 88.

EXT370-DGV

Deluxe Front Seats

Series II, IIA, III Seat Frame

EXT3812

Leather Strap (3-pack)

140mm Leather Straps were used for retaining the seat bases and commonly used until 1985 on most Series II, III Land Rover seat bases. EXT3812 $ 16.88

Front Seats in Elephant Hide Grey

Vinyl

The elephant hide grey vinyl seating was introduced into mainstream Land Rover production in 1954, and used to great effect in the Series II and IIA interiors.

At the time, there were on average 1,700 Land Rover vehicles rolling off the production line each week. Taking into account model variations and seating types, the result was over 1,000 seats per day going through the exceptionally busy trim shop. We now have a material that’s a superb reproduction with all of the features that are so important when restoring these historic vehicles. Now manufactured with modern quality vinyls that offer the same effect and long life as this classic material has done for over 40 years. Seat belts not included.

Seat Cushion Set in Elephant Hide Grey Vinyl

Front Set of 6 Cushions, Non-Adj. Version

EXT371-EHG-BOLT $ 679.86

Front Set of 6 Cushions, w/Adj. Outer Front Tray

EXT371-EHG-ADJ $ 713.70

Center Set (2 cushions)

EXT371-EHG-CNTR $ 230.98

Individual Seat Cushions in Elephant Hide Vinyl

Outer Bottom Non-Adj. EXT374-EHG $ 97.50

Outer Bottom for Adj. Tray EXT375-EHG $ 105.75

Outer Back w/Fixing Bolts EXT372-EHG $ 139.50

Outer Back w/Fixing Pins EXT373-EHG $ 135.61

This style of deluxe front seats with distinctive sculptured design and face fluting running from front to back in the center panels of the seats was used throughout the production run of the Series III Land Rover. The center seat back mounts with pin type fittings and the outer seat backs mount with fixing bolts that use internal threads for securing upright into adjustable trays.

Seat Cushion Set in Deluxe Black Vinyl

Front Set of 6 Cushions EXT378-1 $ 459.00

NEW Deluxe Seat Cushion Set, Tan Vinyl

Front Set of 6 Cushions EXT378-9 $ 810.53

NEW Deluxe Seat Cushion Set, Harris Tweed Front Set of 6 Cushions EXT378-10 $1694.55

Individual Deluxe Seat Cushions in Black Vinyl

Outer Bottom for Adj. Tray EXT378-3 $ 73.22

Center Bottom EXT378-5 $ 68.00

Outer Back w/Fixing Bolts EXT378-2 $ 89.95 Center Back w/Fixing Pins EXT378-4 $ 86.95

PLX824 139.00

EXT371-BV

Standard Front Seats in Black Vinyl

Galvanized Corner Cap for Series Seat Base

EXT221-50 $ 9.50

Exmoor Trim produces a range of Series II III seating that is simply as good as it gets. The front seat cushions and squabs use modern, high-quality foam, and have superb feel and ride. Fitted with metal back plates beautifully reproduced as original. The Standard, Elephant Hide and De luxe seat backs are supplied with new pivot bolts, nylon washers and locking bolts; if you re quire leather retaining straps, these are available separately. Seat belts not included.

Seat Cushion Set in Black Vinyl

Front Set of 6 Cushions EXT371-BV $ 481.46

Individual Seat Cushions in Black Vinyl

Outer Bottom Non-Adj. EXT374-BV $ 79.99

Outer Bottom for Adj. Tray EXT375-BV $ 61.77

Outer Back w/Fixing Bolts EXT372-BV $ 89.00

Outer Back w/Fixing Pins EXT373-BV $ 79.00

Center Set (2 cushions) EXT371-BV-CNTR $ 210.99

72 roversnorth.com The Source for Classic Land Rover Parts
EXT371-EHG-BOLT Galvanized Corner Cap for Series Seat Base EXT221-50 $ 9.50
Series Interior
one base and matching back Black Vinyl
Dark Grey Vinyl
Black Leather
EXT378-10 Includes
EXT370-BV $ 489.00
EXT370-DGV $ 524.99
EXT370-BL $ 669.00

Rear Jump Seats

Twill Vinyl EXT050-DT $ 209.08

Black Vinyl EXT050-BV $ 219.00

Elephant Grey Vinyl EXT050-EHG $ 289.00

Black Leather EXT050-BL $ 408.98

Black Mondus Cloth EXT050-BSM $ 289.00

Diamond Black XS EXT050-DBXS $ 299.00

Diamond White XS EXT050-DWXS $ 315.20

Dark Grey Vinyl.................EXT050-DGV $ 229.00

XS Black Rack EXT050-XSBR $ 336.52

Techno Cloth EXT050-TC $ 205.85

G4 Style EXT050-G4 $ 289.00

Denim Vinyl D90 NAS EXT050-NAS $ 239.50

Rear Jump Seat Base Board, Series, Defender

Fits: Series, Defender PLQ762 $ 74.50

Rear Inward Fold Up Seats

Black Vinyl EXT054-BV $ 317.00

Black Leather ...................EXT054-BL $ 571.89

Denim Twill EXT054-DT $ 283.56

Diamond White XS EXT054-DWXS $ 387.99

Dark Grey Vinyl EXT054-DGV $ 359.99

G4 Style EXT054-G4 $ 389.99

Rear Bench Kit, Seats 2, Series 88”, Defender 90

Black Vinyl, Galv. Frame EXT003-BV $ 243.30

Elephant Hide, Galv. Frame EXT003-EHG $ 263.75

Dark Grey Vinyl, Black Frame EXT002-DGV $ 182.01

Denim Twill Vinyl, Black Frame EXT002-DT $ 203.01

Black Vinyl, Black Frame EXT002-BV $ 189.60

Techno, Black Frame EXT002-TC $ 288.99

XS Vinyl, Black Frame EXT002-XSV $ 238.73

Oxford Tan EXT002-OT $ 218.75

Oxford Tan Vinyl Vault ....................EXT002-VLTOT $ 439.99

Bottom Cushion only, for 2-Man Rear Bench Seat

Black Vinyl EXT005-BV $ 48.14

Elephant Hide Vinyl EXT005-EHG $ 63.50

Dark Grey Vinyl EXT005-DGV $ 44.13

Denim Twill EXT005-DT $ 52.07

Techno EXT005-TC $ 57.60

XS Vinyl EXT005-XSV $ 52.07

Back Cushion only, for 2-Man Rear Bench Seat

Black Vinyl EXT004-BV $ 79.43

Elephant Hide Grain EXT004-EHG

Defender Foam Cushion Seat Base, Front EXT321-2 $ 62.19

Defender Foam Cushion Seat Back, Front EX776A $ 73.29

Headrest Foam, Defender 90/110...............................EXT3213 $ 29.50

Discovery I Foam Cushion Seat Base, LH or RH EXT321-4 $ 107.25

Discovery I Diaphragm EXT317-D1-DIA $ 106.99

Discovery II Foam Cushion Seat Base, LH or RH EXT321-10 $ 115.93

Discovery II Diaphragm EXT317-D2-DIA $ 106.99

“Fast, Courteous Service” - Ugo, Canada (800) 403 7591 roversnorth.com 73
Replacement Front Foam Cushions
Defender, Series Seats
$ 91.00 Dark Grey Vinyl EXT004-DGV $ 66.19 Denim Twill EXT004-DT $ 68.94 Techno .......................................................EXT004-TC $ 76.22 XS Vinyl EXT004-XSV $ 68.94 Black Leather EXT004-BLL $ 220.57
Side Bench Seat Kits Optional folding, side-facing seat assembly as fitted to Series II through Defender up to 2007. Each seat is supplied with mounting hardware and retaining strap. Requires two lap type seat belts. Folds up for additional storage when not in use. Available in all trim colors by special order. EXT050-DT
Cushion only, for 3-Man Rear Bench Seat
Vinyl EXT008-BV $ 74.50
Grey Vinyl EXT008-DGV $ 64.50 Denim Twill EXT008-DT $ 78.47
Cushion only, for 3-Man Rear Bench Seat
Vinyl EXT007-BV $ 51.53
Grey Vinyl EXT007-DGV $
Denim Twill EXT007-DT $
EXT050-BV EXT054-BV EXT002-VLTOT
Web Strap for Rear Bench Seat RNA0283 $ 10.99 EXT321-10 Defender 90 NAS Rear Forward Facing Bench Seat Retrim Kit Seat Base and Seat Back (foam pads not included) EXT331-10NAS $ 459.99 Seat Base Foam ETUSA321-2 $ 147.95 Seat Back Foam ETUSA321-3 $ 107.09 Seat Bracket Set Rear RNA9008 $ 199.50 Retainer Strap Set of 4 Rear Jump Seat PLB894-4 $ 59.00 PLB894-4 Designed for easy installation and simple operation. When not in use, it locks securely away on top of the wheel arch with minimal intrusion into the load area. Black Vinyl Vault, RH EXT053-VLT-R/H $ 2199.00 Black Vinyl Vault, LH EXT053-VLT-L/H $ 2199.00 Denim Twill, RH EXT053-DT-R/H $ 2193.40 Denim Twill, LH EXT053-DT-L/H $ 2193.40 Black Leather, RH EXT053-BL-R/H $ 2425.49 Black Leather, LH EXT053-BL-L/H $ 2425.49 XS Black Rack, RH..........................................EXT053-XSBR-R/H $ 1921.88 XS Black Rack, LH EXT053-XSBR-L/H $ 1921.88 Forward Facing Lock and Fold Rear Seats EXT0053-VLT-LH EXT331-10NAS Finished seat shown. Seat frame not in cluded; you must use your original frame. Other fabric colors are available, please inquire. Forward Facing Lock and Fold Rear Seats
Rear
Bottom
Black
Dark
Back
Black
Dark
54.72
64.68
Nylon

Rear

2007 2016, Genuine RNY221 $ 254.82

Rear Loadspace Protector Rigid, Fits: Defender 90, D110 w/o loadspace seats up to 2007 RNQ691 $ 289.77

Acoustic Loadspace Mat all Series & D90, 110 SW, Exmoor EXT009-1 $ 179.00

2. Mat For Drop Down Tailgate For Defender, Series EXT017-33 $ 125.17

3. Moulded Floor Mats Front Pair Defender (LT77, R380 and 2007-on) EXT017-2 $ 70.53

Rubber Floor Mat Front Pair Defender 2007-on, Genuine RNS556 $ 123.44

Rubber Mat Set Front Pair, Defender Black, Genuine RNI067 $ 144.33

Rubber Floor Mat RH Front Defender R380, ProLine PLF480 $ 119.50

Rubber Floor Mat LH Front Defender R380, ProLine PLF481 $ 119.50

Rubber Floor Mat RH Front Defender 4-Cylinder, ProLine....................PLS830 $ 85.99

Rubber Floor Cover Front LH, Defender, Genuine RNS831 $ 211.95

Rubber Floor Mat LH Front Defender 4-Cylinder, LT77, ProLine PLS831 $ 85.99

Rubber Floor Mat Set Front, Defender Pre-2007, Genuine RNN213 $ 112.00

Rubber Floor Mat Set Front, Defender 2012 2016, Genuine RNQ690 $ 114.69

5. Rubber Mat Tunnel Cover, 300Tdi, V8, Td5, Genuine RNF482 $ 221.80

6. Rubber Mat Middle Seat Floor Defender 110 SW, Genuine RNQ689 $ 119.00

Rubber Floor Mat Set Middle Footwell, D110 SW, Genuine RNI070 $ 139.95

Rubber Floor Mat Set Rear Pair Defender 110 SW, Genuine ..............RNX158 $ 140.79

Rubber Floor Mat Set Middle Defender 130 Crew Cab, Genuine RNY222 $ 140.79

Moulded Floor Mats Middle Row Series, Defender EXT017-3 $ 70.53

7. Bulkhead Trim Panel Center Defender V8, 300Tdi, Genuine RNI325 $ 535.50

Bulkhead Trim Panel Center Defender, V8, 300Tdi, Td5 ProLine PLI325 $ 169.00

8. Insulation Pad Front Seatbase Defender Td5 on LHD, Genuine RNI865 $ 249.95

Seatbox Surround

89.95

Moulded Defender Mat Set V8, 300Tdi, Td5 Black, Genuine RNK4200 $ 999.95

Moulded Defeater Barrier Mat 3-Piece, R380, Late 300Tdi, Black EXT009-29 $ 964.99

Moulded Matting System 3-Piece Puma Black EXT009-25 $ 954.99

Moulded Matting System 3-Piece 4-Cyl w/LT77 LHD or RHD, Black EXT009-12BK $ 893.99

Fastener Seat Box Trim Defender Black, Genuine RNY225 $ 2.01

Screw Self Tapping No. 10 x 5 x 8, Genuine RNC795 $ 1.17

Insulated Floor Mat Defender V8, 300Tdi, & Td5, Genuine RNN717 $ 359.95

Acoustic Rear Mat System 3-Piece Set Series, Defender, Exmoor EXT009-14 $ 311.04

74 roversnorth.com The Source for Classic Land Rover Parts PLF479 Defender NAS 90 Seatbox Surround Insulation Defender NAS 90 V8 Black, Hardura, ProLine PLF479 $ 89.95 RNS556 Defender 2007-on RNQ689 Defender Defender Toe Board Trim Set These reproduction toe board trims are designed after the NAS Defender original. They fit most Defender vehicles up to 2006; however they may require some trimming with a utility knife PLI071-2 $ 79.95 PLI071-2 Gear Lever Insulation Pad Crumbling foam on your gear lever seal? This is the answer; refit with a new factory Land Rover Genuine part RNN992 $ 62.31 RNN992 Defender Interior Trim A Defender Interior Trim and Floor Mats 1. Rear Loadspace Mat Defender 90, w/rear fuel filler, Genuine RNF468 $ 277.95
Loadspace Mat 109 3-Door, 110 3-Door, ProLine PLB792R $ 55.99
Loadspace Mat 109 3-Door, 110 3-Door, Exmoor EXT009-10 $ 205.00
Loadspace Mat 110 Puma 7-Seat SW 2007 2016, Genuine ......RNQ688 $ 259.00
Loadspace Mat 110 Puma 5-Seat SW 2007 2016, Genuine RNQ777 $ 254.95
Loadspace Mat 90 Puma SW 2007 2016, Genuine RNY220 $ 189.76
Loadspace Mat 90 Puma,
Rear
Rear
Rear
Rear
Rear
12.
13.
14. Retainer RH Top
................................................PLF569
15.
16.
Insulation D90 NAS V8 Black Hardura, ProLine PLF479 $
9. Trim Set For Toe Boards Defender PLI071-2 $ 79.95 10. Interior Trim RHF Kick Panel Defender, Genuine RNY223 $ 42.15 11. Interior Trim LHF Kick Panel Defender, Genuine RNY224 $ 45.48
Retainer RH Footwell Vertical Trim Defender up to 2007, ProLine PLY147 $ 19.50
Retainer LH Footwell Vertical Trim Defender up to 2007, ProLine PLY146 $ 19.50
Footwell Trim Defender
$ 44.50
Retainer LH Top Footwell Trim Defender PLF568 $ 44.50
Rubber Mat Defender V8, 300Tdi, Td5. RNF482 $ 221.80 Fiberglass Tunnel Cover R380, LT77 PLN987 $ 474.99 PLN987 A Defender Trim and Floor Mats
“Faster processing and shipping than Amazon. Consistently impressed! “ -Nicholas, USA (800) 403 7591 roversnorth.com 75 Defender Interior Trim
Powder-coated satin black for improved dur ability. Locates on door post interior and below dash. Retains the outer edge of footwell insu lated rubber or carpet trim. Made in the USA. Fits: Defender all models 1983 2006.
Vertical RH (pass side) PLY147 $ 19.50
Vertical LH (driver side) PLY146 $ 19.50
Defender Rear Speaker Mount Panel Kit Trim Panel RH, & LH Panel Set, max 5” dia. speaker, ProLine RNA1327 $ 119.00 Series, Defender Rear Trim Speaker Panel Kit Full Premium Carpet Sets Defender 90 R380 and ZF auto, LHD, Full Premium Carpet Set, Ebony EXT021-3 $ 569.00 Defender 110 R380, LHD, Full Premium Carpet Set, Ebony EXT021-5 $ 629.00 Defender 90 LT77, LHD, Front Set, Full Premium Carpet Set, Ebony EXT021-2 $ 655.99 Defender 110 LT77, LHD, Front Set, Full Premium Carpet Set, Ebony EXT021-4 $ 704.99 Defender Alloy Footwell Trim Retainers NEW Defeater Barrier Mat Set EXT009-29 RNA1327 PLY146 RNA1327 - Left Side EXT009-29 NEW H Defeater Barrier Mat Set Defender Carpet, Flooring Sets High-quality OEM carpet sets. Easy to install with good soundproofing, creating a truly great kit that will transform your entire interior. Watch the Defeater Barrier Mat install video Defender R380 3-Piece Injection Moulded Set NEW Defeater Barrier Mat, Black for Defender with R380 EXT009-29 $ 964.99 Front Standard Carpet Sets Defender LHD, Front Set LT77 Gearbox, Standard Set, Ebony EXT020-2RN $ 266.99 Defender RHD, Front Set LT77 Gearbox, Standard Set, Ebony EXT020-2 $ 266.99 EXT021-2 EXT020-2RN EXT020-2
Horizontal RH Top PLF569 $ 44.50 Horizontal RH Top PLF568 $ 44.50

1. Front Door Trim Set w/o Pockets Series, Elephant Hide Grey Vinyl EXT382-24 $ 389.00

Front Door Trim Set w/Pockets Series, Elephant Hide Grey Vinyl EXT382-25 $ 489.00

Front Door Trim Set With Pockets Series, Black Vinyl EXT382-10 $ 420.12

Interior Front Door Panel Set For Defender 90 and Series III RNA4700 $ 449.00

2. Interior Door Pull Handle Galvanized For Series, ProLine PLB693 $ 18.95

Grab Rail Middle Seats Series IIA & III 109" SW, Genuine RNX836 $ 271.26

Handle Interior Door Pull, Defender, Genuine RNF474 $ 7.16

3. Kick Panel Trim, LH Replacement Part, Series IIA, III, Genuine RNB789 $ 19.43

4. Kick Panel Trim, RH Replacement Part, Series IIA, III, Genuine RNB790 $ 19.43

5. Kick Panel Trim Middle Floor 109 & 110 Station Wagon, ProLine PLS528 $ 67.00

Retainer, Interior Trim, Series III, 109” SW, Defender, Genuine RNY219 $ 32.77

Retainer, Interior Trim, Series III, 109” SW, Defender, ProLine PLY219 $ 14.50

Screw, Self Tapping, No. 6 x 1/2”, Genuine

Screw, Self Tapping, No. 6 x 1/2”, ProLine

6. Trim, Center Bulkhead Series IIA & III, ProLine

RNH491 $ 2.06

PLH491 $ 0.82

PLF464 $ 51.98

7. Tunnel Cover, Cloth Series II, IIA & III RNC128 $ 89.90

8. Floor Mat Set Series II III Front Pair EXT017-1 $ 73.41

Front Mat Set Front Pair Series I 80" EXT017-32 $ 94.15

Front Mat Set Front Pair Series I 86" EXT017-36 $ 92.19

9. Floor Mat, 109" SW Middle, Series IIA & III, Genuine ........................RNB791 $ 249.87

Floor Mat, 109" SW Middle, Series IIA & III, ProLine PLB791 $ 89.00

Moulded Floor Mats Middle Row Series, Defender EXT017-3 $ 70.53 Series 88” Moulded Mat System, Black, Exmoor Trim EXT009-11BK $ 1099.99

10. Door Trim Rear End Door, Series, Black Vinyl EXT382-15 $ 85.99

Door Trim Rear End Door, Series, Elephant Hide Grey Vinyl EXT382-30 $ 101.50

11. Rear Loadspace Mat, 88", 47" x 36 1/16" Series, ProLine PLB786 $ 67.50

Rear Acoustic Mat, Loadspace Series & Defender EXT009-1 $ 179.00

Rear Acoustic Mat 3-Piece Set, Series, Exmoor EXT009-14 $ 311.04

Rear Loadspace Mat, 109/110 Regular EXT009-10 $ 205.00

Rear Loadspace Mat, 109/110 SW, 61" x 36", ProLine PLB792 $ 149.00

Rear Loadspace Mat, 109/110 Regular, ProLine PLB792R $ 55.99

12. Rear Door Grab Handle Series and Defender, Genuine....................RNB056 $ 59.50

Heavy Duty Grab Handle Rear Door Series & Defender, ProLine PLB056HD $ 139.00

76 roversnorth.com The Source for Classic Land Rover Parts Series Interior Trim 1
6
3
A
2
4
7 8 5 8
12 10 9
A Series Interior Trim and Floor Mats
Series IIA, III Center Bulkhead Trim ProLine PLF464 $ 51.98 PLF464 RNB789 RNB790 EXT017-1 Series 2.25L Moulded Matting System, 3-Piece, Black Series Acoustic Moulded Matting System (not V8, 6-Cylinder) 3-piece kit EXT009-11BK $ 1099.99 EXT009-11BK RNY219 RNH491 Series Interior Trim and Floor Mats

What’s New at Exmoor Trim

Three Generations of working with Series and Defender Land Rovers. Exmoor Trim’s new soft top conversion kit offers the perfect op portunity to convert any Defender 110 to a full soft top. Exmoor has applied their extensive knowledge, experience and attention to detail when crafting this conversion kit to produce a high-quality product made in the UK with straightforward installation and easy-to-follow fitment videos. The bar set is fabricated from 50mm powder-coated steel with built-in seatbelt mounts for the second row and load area. All of the drain channels, windscreen header rail, tailgate bar and siderails are included. A swing-away load door or drop-down tailgate can be fitted for flexibility. Each kit comes with choice of a premium Stayfast hood in black or sand to suit any color

Defender 110 So Top Conversion Kits

(800) 403-7591 roversnorth.com 77 Watch the assembly videos on your mobile device to help guide you along. Defender 110 NAS So Top Fitting Instructions - Part 1 Defender 110 NAS So Top Fitting Instructions - Part 2
Above L-R: Middle and rear seat belts are included in the conversion kits (rear seats not included). Stayfast Black Fabric EXT249-11 $ 6990.00 B
Land Rover perfectly. The roll-up windows help make this kit the best way to enjoy the natural beauty of every adventure in your Defender. /// Rugged Stayfast
fabric endures the roughest of weather
Ultimate Beach Runner Build the
NEW H
Photo: @Thetalesoflandrover

Defender 110 Soft Top

Conversion Kits

The Hood

Designed and manufactured by Exmoor Trim at the edge of Exmoor, this 110 hood is made from Stayfast, which is a superb automotive-grade hood fabric. Its three-ply construction makes it extremely stable, durable and waterproof with very good acoustic performance.

A unique feature of this hood is it padded side curtains and rear quarter panels. At Exmoor Trim, we use two layers of Stayfast separated by a layer of insulating closed-cell foam. This gives the hood extra rigidity to prevent vibration at higher speeds and helps to reduce the amount of road noise coming into the vehicle, with the ultimate end benefit of a truly high-grade finish.

The hoods are fitted as standard with high-quality flexible windows in the side and rear curtain as well as rear quarter light windows.

The hood connects to the body of your Land Rover using aluminium ‘Z’ Channels which are finished in black powder coat and attach just below the body capping using black rivets. The lower edge of the hood is fitted with a sewn-in retaining strip that neatly folds into the ‘Z‘channel creating a very clean look with no visible fittings.

The rear curtain is held in place using a locking tailgate bar. This was the standard fitted to all North American Spec soft top Defenders with two locking mounting points on either side of the tailgate, which allows easy access to the back of the vehicle without having to open the tailgate (both clips and bar are supplied with a hood).

Both the side and rear curtains are fitted with heavy-duty YKK zips for smooth and endur ing use. The retaining roll-up straps are fitted out with self-locking buckles so they can be se curely rolled up and stowed when travelling.

The Bar Set

Manufactured in the UK, this high-quality bar set includes all the hardware required to fit it to your vehicle.

The hoops are fabricated from 50mm steel tube, and the entire frame is finished with du rable, hardwearing satin powder coat.

Once the roof, rear door and side panels of your vehicle have been removed, installation of the bars is a straightforward DIY job. We have a detailed fitting video to guide you through the process.

- Front and rear hoops

- Interim hoop and connect ing tie bars

- B-pillar support bar

- One-piece over door drain channels

- Side of door drain channels

- Screen rail

- Tailgate bar and clips

- Z-channels

- Fitting kit with all the nuts, bolts, washers, and rivets needed for assembly.

- Seatbelts

Both the front and rear hoops of the bar set have seatbelt mounts built in. This means you have the upper belt mount and inertia real mounts for both the second row and load area. For the front seats, you use the existing mounts on the vehicle B pillar. The load area seat belt mounts are only suitable for forward facing seats such as the Exmoor Trim Loc and Fold or the Land Rover Tumble Down Seat.

Please Note: If you are converting a 110 Station Wagon, you will need to replace the rear door. The hood and bar set will work with either a swing-away half door or a dropdown tail gate.

Defender 110 Soft Top Conversion Kit, Stayfast Black Fabric

EXT249-11 $ 6990.00

Defender 110 Soft Top Conversion Kit, Stayfast Sand Fabric EXT249-12 $ 6990.00

78 roversnorth.com The
shop
which Stayfast Sand Fabric EXT249-12 $ 6990.00
Source for Classic Land Rover Parts “Highly trustworthy to
on. Located in Vermont,
NEW H
Stayfast Black Fabric EXT249-11 $ 6990.00
automatically means it's good people. I order plenty from these folks. “ -Tom, USA Watch the video on your mobile device. RNA90ST EXT249-10 Defender 90 NAS Soft Top Parts Alpine Bow Hoop Set, Defender 90 NAS Soft Top, Genuine RNQ618 $ 96.50 Five Bar Stud Door Top, Defender 90 NAS Soft Top, Pair RNQ619 $ 95.00 Tailgate Bar Kit 1994 Defender 90 NAS RNE246 $ 159.31 Handle Fixing Kit, Windscreen Header Rail, Defender EXT221-30 $ 29.00 Replacement Clips for Tailgate Bar, Pair EXT406-1 $ 24.50 RNE246 RNQ618 Defender 90 NAS Soft Top Parts 1994 Defender 90 Belt Rail Kit for Soft Top Kit contains side and rear soft top alloy fastener rails with fixing hardware. Black powder coat finish. Fits: 1995 & 1997 NAS Defender 90 Soft Top. Belt Rail Kit, Defender 90 RNE245 $ 178.98 Sunvisor RH Black Defender SVX RNX160 $ 314.95 Sunvisor LH Black Defender SVX RNX161 $ 314.95 NAS-North American Specification RNQ619 Defender 90 NAS Roll Cage Pad Protection Kit New padded foam covers for your NAS roll cage. Easily installed and cleaned. Adds an extra layer of comfort and looks great too. EXT249-10 $ 491.77 Defender 90 NAS So Top Fitting Instructions Stayfast Defender 90 NAS Soft Top Constructed with superior quality fabric, Stayfast will not fade, shrink or crack like the origi nal material. Year after year, this top will look as good as the day you first put it on. Features include weather-secure door seals, heavy-duty rear zipper, roll-up sides and large durable scratch-resistant side and rear quarter windows for improved visibility. Totally weather proof to keep you dry and comfortable in foul weather. Will fit perfectly on your existing belt rail system. Made in the UK. Defender 90 NAS full soft top RNA90ST $ 2479.53 RNA90ST Photos: Professional installation and fitment by Adventure Motor Cars, AL RNE245 EXT406-1 (800) 403-7591 roversnorth.com 79 Defender 90 NAS Soft Top

Adjustable Heavy Duty Panhard Rod

FITS: Discovery I, RRC, Defender, ProLine.

PLS024A $ 107.50

Panhard Rod Assembly

ProLine FITS: Discovery I, RRC, Defender PLS024 $ 79.95

Galvanized Panhard Rod Assembly

Land Rover panhard assembly hot dipped galvanized with new Genuine bushings installed. Secures the front axle to the chassis for lateral stability. Normally the first bushings to wear out in Defender causing vehicle steering to wander.

FITS: Defender 1983 2001, Range Rover Classic 1986 1995,

Galvanized Front Defender Radius Arms

Land Rover Genuine Part. Front radius arm complete as sembly that has been galvanized with new Genuine bush ings installed. FITS: Defender 47mm wide 1983 1993, 54mm wide 1994 2016, Range Rover Classic 1986 1995, Discovery I 1989 1999.

47mm wide PLE456C $ 249.00 54mm wide PLH056C $ 279.00

Front Shock Tower

FITS: Defender all models 1983 2016, Discovery I, RRC.

ProLine PLS023 $ 39.50 Ea.

Genuine RNS023 $ 119.95 Ea. TF508

handling geometry. Sold as pairs. Front Radius Arms, 3 Degrees (2-4” lift) pair TF508 $ 549.00

RNA6345

Galvanized Front Shock Towers and Spring Seat Set

Rovers North front shock tower set with hardware. Hot dipped galvanized finish on shock turrets & spring seats for superior corrosion resistance. Made in the UK. Set in cludes 2 shock towers, 2 bottom spring seats, 2 stud plates and mounting hardware. FITS: Defender 1983 2016 all models, Coil sprung Range Rover Classic 1970 1993 all models, except 1993 LWB.

Front Coil Spring Dislocation Cones

Rovers North Front dislocation cones for coil sprung ve hicles. Easily bolts to your chassis front top spring mount. Proven effective in guiding a dislocated spring back into place, allowing for maximum axle articulation (sold in pairs). Requires spring retainer set SRP105. FITS: Defender all models 1983 2016, Discovery I all models 1989 1998, Range Rover Classic all models originally fitted with coil springs, ProLine. PLS023DC $ 71.07

RNA6344

Coil Spring Lift Spacers, 50mm

2" Spring Spacer Blocks, Front Pair. Manufactured from 6mm steel with a zinc finish. FITS: Defender, RRC, DI.

Front RNA6344 $ 85.00

Rear RNA6345 $ 85.00

Discovery I 1989 1999 all models.

RNA1186 $ 119.44

Heavy Duty Front Spring Retainers

Heavy duty coil spring retaining plates. Sold in pairs. Front Pair SRP105 $ 23.15

SRP105

Coil Spring Lift Spacers Front, 25mm

1" billet anodised aluminum front spring spacer for Defender, RRC, DI.

RNA0086 $ 159.00

80 roversnorth.com The Source for Classic Land Rover Parts “Product arrived ahead of schedule and was perfect!” -Phil, USA

Rear Dislocation Cones

Proline dislocation cones for coil sprung ve hicles. Easily bolts to your chassis rear top spring mount. Proven effective in guiding a dislocated spring back into place, allowing for maximum axle articulation (sold in pairs). Requires heavy-duty spring retainers (see part #SRP106), ProLine. RRC, D90, DI PLH617DC $ 95.00 Pair Defender 110 PLH617DC110 $ 108.15 Pair

SRP107

Heavy-Duty Rear Spring Retainers

Heavy-duty coil spring retaining plates. Sold in pairs.

Rear Pair SRP106 $ 21.63

Rear HD D110 SRP107 $ 21.00

Rear Galvanized Top Link Assembly

Complete Land Rover top link assembly, hot dipped gal vanized with bushings and upper ball joint installed. Defender 1983 2016 without BOGE load leveling unit, Range Rover Classic without BOGE load leveling unit. Discovery I 1986 1999. NOTE: Will fit Defender 110 and Range Rover Classic fitted with BOGE load leveling unit by changing out the top center section where the top ball joint mounts, ProLine. PLS1201C $ 449.00

Spring Retainer Sets

Front and rear coil spring seat and retainer set. Includes 4 hot dipped galvanized spring seats, 4 stainless steel HD spring retainers and stainless steel hardware. Add 2x PLS023G for front axle.

D90, DI, RRC w/factory coil spring susp. RNA0071 $ 144.00

Defender 110,130 all models. RNA0086 $ 159.00

Heavy-Duty

8” Galvanized Front Shock

Tower Pair

Front shock tower for coil sprung vehicles. Heavy-duty tubu lar performance shock towers 2 inches lower than genuine for increased front shock travel. These are the strongest shock towers we offer. Hot dipped galvanized 8 inches tall (sold in pairs). Note: Requires 2 heavy-duty securing rings RNA502. For matching rear shock mount use PLH617DK.

FITS: Defender all models 1983 2016, Discovery I all models 1989 1998, Range Rover Classic originally equipped with coil springs, ProLine. PLS022HDG $ 143.17

Coil Spring Lift Spacers Rear, 25mm

1" billet anodised aluminum rear spring spacer for Defender, RRC, DI. RNA511 $ 56.90

(800)
roversnorth.com 81
403-7591
Extends driveshaft length 15mm.
flanges,
Propshaft Spacer Kit
FITS: All 4-bolt
front or rear, Defender, RRC, DI. RNA512 $ 29.95
w/ProLine bushing PLS038 $ 62.95 Galvanized, w/Genuine bushing PLS038C $ 219.00 RNA512
ProLine,
Off-Road
Extreme Suspension Gear for
use
PLH617DC SRP106 RNA0071
PLS1201C
RNS038

Axle Assembly Defender

fea ture superior

Genuine

Kit Defender 90 (includes

Genuine Land Rover Defender Shock and Spring Kits

Defender 90, Standard Shock & Spring Kit, Genuine RNK5300 $ 1096.00

Defender 90, Heavy Duty Shock & Spring Kit, Genuine RNK5301 $ 1139.00

Defender 110, Standard Shock & Spring Kit, Genuine ..................RNK5302 $ 1020.00

Heavy Duty Shock & Spring Kit, Genuine RNK5303 $ 1080.00 Defender Genuine Shock & Spring Kits Land Rover Genuine Sus pension components

PLY120L

Rear Axle Assembly Defender 110, 127, 130

Remanufactured complete non-ABS/ETC rear axle assembly. Built to the latest Land Rover heavy-duty specification with disc brakes as fitted from 2007 on. Features new Ashcroft Torque Biasing Limited Slip differential assembly for improved traction. Features all new Genuine or OEM half axles, brake discs, caliper assemblies, bearings and oil seals.

FITS: Defender 110,127,130 rear without anti-lock braking and electronic traction control systems. A direct replacement for 2002 2016. NOTE: Fitting 110, 127 and 130 models 1983 2001 requires replacing the rear prop shaft with the correct length for wheel base. For 110 rear prop shaft use PLL839A. For 127, 130 rear use PLY186.

Rear Axle Assembly Defender 90

Remanufactured complete non-ABS/ETC rear axle assembly. Built to the latest Land Rover specification with disc brakes as fitted from 2007 on. Features new Ashcroft Torque Bias ing Limited Slip differential assembly for improved traction. Features all new Genuine or OEM half axles, brake discs, caliper assemblies, bearings and oil seals. Ready to bolt in. Made in the UK. FITS: Defender 90 1985 2016 without Anti Lock Braking and Electronic Traction Control. NOTE: For early 90 models 1985 1993 with drum brakes upgrading to rear disc brakes requires upgrading the brake master cylinder. Use RNF285, or PLF285 master cylinder for 4 wheel disc brakes. Axle Assembly Rear Defender 90 ....PLY121L $ 5590.00

Torque Biasing Limited Slip Differential Assembly, 3:54 Ratio

The key features are: Fully automatic, no driver input required. Totally transparent on-road, no adverse ef fects. Only comes into play when one wheel loses trac tion, i.e., a difference in wheel speed. Enhances the traction control as it multiplies the bias load created by the braking effect of the traction control. Needs no ad justment as the gears compensate for any wear that takes place. This Torque Biasing Limited Slip Differen tial works best with a good quality mineral-based oil; we do not recommend synthetic oils or friction addi tives. Modifiers are not required.

The Torque Biasing Limited Slip Differential is a Helical Gear type LSD with six gear pockets. FITS: Defender 90 front and rear, Defender 110, 130 front only, Discovery I front and rear with 4-bolt drive flange, Range Rover Classic front and rear.

Rebuilt differentials have four new Timken tapered roller bearings, new oil seal and new drive flange. Ring and pinions are inspected for wear and damage if they pass, they are reused, if not, new are fitted. An additional $200.00 core charge will be added to all or ders for FTC3272A.

Torque Biasing Limited Slip Differential, 3:54, 24 spline

FTC3272ATB $ 1279.95 2-Pin Differential, Rebuilt, 3:54, 24 spline FTC3272A $ 719.95

Land Rover Genuine Parts Superior Performance Variable Rate Spring Kits Defender 90, Coil Spring Set of 4, HD w/winch, Genuine RNK5111 $ 479.00 Defender 90, Coil Spring Set of 4, Heavy Duty, Genuine RNK5101 $ 399.00 Defender 110, Coil Spring Set of 4, HD, Genuine RNK5102 $ 449.00
Land Rover Defender Shocks
RNJ729 $ 191.95 Ea
$
Ea
$
Axle Assembly Rear Defender 110, 127, 130 PLY120L $ 5950.00 Ea
Shock Absorber Front Defender 90/110/130, Genuine
Shock Absorber Rear Defender 90, Genuine RNJ722
166.78
Shock Absorber Rear Defender 110/130, Genuine RNJ723
138.42
Shock
2 front, 2 rear shocks, 1983 2015), Genuine RNK731 $ 639.00 Shock Kit Defender 110/130 (includes 2 front, 2 rear shocks, 1983 2015), Genuine RNK732 $ 619.00
performance
rate coil springs and the
nitrogen gas
valving
for
Each kit includes four
coil springs and four Genuine nitrogen
and
included.
Defender 110,
variable
latest
pressurized
technology
overall superior Genuine Shock performance.
Genuine
gas shocks. Shock mounting bushings
hardware
Remanufactured complete non-ABS/ETC front axle assembly. Built to the latest Land Rover heavy-duty specification with vented disc brakes as fitted from 2007 on. Remanu factured front axle housing with 4-pin differential assembly. Features all new Genuine or OEM axles, CV joints, swivel balls, top pins, vented brake discs, 4-piston calipers, bear ings and oil seals. FITS: Defender 90, 110, 130 without ABS/ETC 1983 2016. Front Axle Assembly Front 4-Pin Defender .......................................... PLY119 $ 5489.00 Features NEW Ashcroft Torque Biasing Limited Slip Differential PLY120L PLY119 82 roversnorth.com The Source for Classic Land Rover Parts
Front

The perfect solution for owners requiring more power and reliability in their early Defender. Improve performance, fuel mileage and increase your Defender's value by installing Land Rover’s famous 300 Tdi into your early Defender. Available in both standard 2.5 Litre and a more powerful 2.8 Litre version. Both these engines come power steering and air conditioning ready. They also allow for further performance options like performance stainless steel exhaust and performance intercooler assembly.

FITS: Defender 1983 1994 originally fitted with a 2.5 NA, 2.5 Turbo, 200 Tdi diesel, 2.3 and 2.5 petrol engines with LT77 five-speed gear box. NOTE: Replacing an early worn motor will most likely require replacing certain fuel system, cooling and exhaust components.

These precision-built engines come as a complete direct replacement for all 4-cylinder diesel and petrol motors fitted to Defenders from 1983 to 1993. Remanufactured to exacting standards. Features all new OEM and/or Genuine cylinder head components, piston assemblies, tappet assemblies, camshaft, engine bearings, turbocharger, injectors, injection pump, oil pump, seals and gaskets. Includes new starter motor, vacuum motor, fuel lines, fuel pump, fan belt, water pump, thermostat, 100 amp alternator and reconditioned flywheel. Includes new power steering bracket and pump, clutch assembly and engine mounts.

Ultimate 2.8 Litre

300 Tdi Engine Kit

Experience the amaz ing power and low speed torque of our 2.8 litre remanufactured 300 Tdi Diesel engine with the fitting kit for a Defender 300 Tdi application.

Built from a Genuine Land Rover 300 Tdi core, this motor will transform the performance of your Land Rover with an awesome 277 lb-ft. torque at only 1400 rpm! With bigger pistons and a variable turbo, our engine produces 24 more horsepower and 82 more lb-ft of torque than the original 300 Tdi.

Our engine manufacturer starts with a used 300 Tdi cylinder block, which is subjected to a rigorous overhaul process involving a special acid bath to remove any internal rust deposits. The 2.5 liter 300 Tdi block is then rebored to 2.8300 liters and comes with all new parts, including a new variable geometry turbocharger, cylinder head, injectors, crankshaft, connecting rods, pistons, timing case, and timing gears. Assembly required! This is an en gine kit. For compliance reasons, the turbo with manfolds is supplied as a separate part. We include a complete assembly guide and all the necessary bolts, washers, gaskets, etc. This Engine is not certified for use in California. NOTE: This motor may be used in many applications. This part number in cludes a fitting kit for Defenders originally equipped with 300 Tdi engines. Contact us for more information.

Ultimate 2.8 Litre 300 Tdi Engine Kit

RNE28TDI $ 16590.00

300 Tdi Diesel Engine

Long Block Assembly

300 Tdi diesel stripped engine assembly with new OEM and Genuine cylinder head components, piston assemblies, tappet as semblies, camshaft, engine bearings, oil pump, seals, and gaskets. Precision re-manufactured to exacting standards to ensure long and reliable service life.

300 Tdi, 2.5 Litre PLH516 $ 5999.00

Performance

PLH516 PLE885
For Defender 90, 110, 130 All 4-cylinder Models 1983-1993 Updated Land Rover Engines for Defenders
The 2.8L Engine Upgrade o ers 20% increase in power over the standard 300 Tdi! 300 Tdi, 2.5 Litre Engine Upgrade Defender All 4-Cylinder models 1983 1993 RNE0300 $ 15250.00 300 Tdi, 2.8 Litre Engine Upgrade Defender All 4-Cylinder models 1983 1993 RNE0328 $ 16740.00 PLE885
403-7591 roversnorth.com 83
RNE28TDI
(800)
Kit
for ProLine use PLH858. MDTK200 $ 2690.00 MDTK200 Performance 300 Tdi Turbo Kit Kit includes new Variable Nozzle Turbocharger (VNT), exhaust manifold, manifold gasket, front exhaust adaptor pipe, intercooler pipes, intake hoses and hardware. Everything you need to seriously increase turbocharger performance for your 300 Tdi. Maximum torque will increase from 195 lb-ft @ 1800 rpm to 235 lb-ft @ 1400 rpm. FITS: Defender 300 Tdi diesel. Performance 300 Tdi Turbo Kit MDTK300 $ 2790.00 MDTK300
Tdi Long Block Assembly 200 Tdi diesel stripped engine assembly for Defender. Precision remanufactured to exact ing standards. Features all new OEM and/or Genuine cylinder head components, piston assemblies, tappet assemblies, camshaft, engine bearings, oil pump, seals and gaskets. 200 Tdi, 2.5 Litre PLE885 $ 6489.00
200 Tdi Turbo
Everything you need to seriously in crease turbocharger performance for your 200 Tdi. Maximum torque will in crease from 188 lb-ft @ 1800 rpm to 235 lb-ft @ 1400 rpm. FITS: Defender 200 Tdi diesel. NOTE: The larger size of the new variable nozzle turbo locates the turbo too close to your bonnet, which will most likely cause heat and clearance issues. We recommend fitting the Puma bonnet with raised center to avoid possible excessive heat and clearance issues. Genuine Puma bonnet use RNH858;
200

A Defender 200Tdi Cylinder Head

1. Rocker Cover 200 Tdi, Genuine RNX890 $ 109.57

2. Gasket Valve Cover 200 Tdi, Genuine RNL204 $ 33.49

Gasket Valve Cover 200 Tdi, Proline PLL204 $ 8.19

3. Cap Oil Filler, 200 & 300 Tdi, Genuine RNN330 $ 20.28

Cap Oil Filler, 200 & 300 Tdi, ProLine PLN330 $ 16.00

4. Bolt M6 x 25mm, Genuine RND758 $ 2.36

5. Seal Valve Cover 200 Tdi, Genuine RNN331 $ 20.74

Seal Valve Cover 200 Tdi, Proline PLN331 $ 5.95

6. Bracket Cable Clip Mount, Genuine RNX891 $ POA

7. Cable Clip Heater Hose, Genuine RNX812 $ 6.04

8.

Valve Guide Intake & Exhaust, Genuine RNH981 $ 26.50

Valve Guide Intake & Exhaust, Proline PLH981 $ 6.75

9. Frost Plug - 15/16", Genuine RNC238 $ 4.51

10. Frost Plug 1 3/8", Genuine, Genuine RNC234 $ 8.83

11. Insert Inlet Valve 200 Tdi, Genuine RNX892 $ POA

12. Dowel Ring 200 Tdi, Genuine RNX893 $ 12.95 13. Stud M10 x 25mm, Genuine RNE097 $ 4.93

14. Stud M8 x 25mm, Genuine RNX328 $ 1.60

15. Stud M10 x 35, Genuine RNX329 $ 3.35

Stud M10 x 35, ProLine PLX329 $ 0.90

16. Bolt Cylinder Head M12 x 100mm 200/300 Tdi, Genuine RNL059 $ 15.77

Bolt Cylinder Head Short M12 x 100mm 200/300 Tdi, Proline PLL059 $ 4.07

17. Bolt Cylinder Head Long 200 Tdi, Genuine RNL207 $ 24.90

18.

19.

Bolt Cylinder Head Long M12 x 125mm 200 Tdi, Proline PLL207 $ 5.10

Bolt Cylinder Head M10 x 117mm 200/300 Tdi, Genuine RNL077 $ 14.10

Bolt Cylinder Head Short M10 x 117mm 200/300 Tdi, Proline PLL077 $ 5.10

Head Gasket 200 & 300 Tdi 1 Hole 1.30mm, Genuine RNH704 $ 122.51

Head Gasket 200 & 300 Tdi 1 Hole 1.30mm, Proline .............................PLH704 $ 49.95

Head Gasket 200 & 300 Tdi 2 Hole 1.40mm, Genuine RNH705 $ 115.69

Head Gasket 200 & 300 Tdi 2 Hole 1.40mm, Proline PLH705 $ 39.50

Head Gasket 200 & 300 Tdi 3 Hole 1.50mm, Genuine RNH706 $ 115.69

Head Gasket 200 & 300 Tdi 3 Hole 1.50mm, Proline PLH706 $ 39.50

Head Gasket 200 & 300 Tdi 1.60mm, Genuine .......................................RNH707 $ 115.69

Head Gasket 200 & 300 Tdi 1.60mm, Proline PLH707 $ 49.95

Washer Timing Tensioner 300Tdi, Genuine RNX894 $ 29.53

Bolt Flange, Genuine RNS657 $ 4.69 Timing Belt Kit Defender 200 Tdi TBK2002 $ 72.05

Defender 200Tdi Long Block Assembly

Remanufactured to a higher standard than Genuine. Features a new cylinder head, head bolts, new rocker shaft, all new valves, guides and springs. New camshaft, cam bearings, push rods and all new tappet assemblies. All new Genuine oil seals, gaskets, oil pump and crankshaft pulley. All new Genuine .020 piston assemblies, piston rings, thrust washers, main bearing and rod bearing sets. All new Genuine or OEM internal components except re-machined cylinder block, connecting rods and crankshaft. Built in the UK for Rovers North. PLE885 $ 6489.00

20.

Cable Assembly Glow Plug 200 Tdi, Genuine RNN334 $ 34.68

Cable Assembly Glow Plug 200 Tdi, Proline PLN334 $ 31.00

84 roversnorth.com The Source for Classic Land Rover Parts
Head
Defender 200Tdi Cylinder
A Defender 200Tdi Cylinder Head continued 21. Glow Plug 200 & 300 Tdi, Genuine RNH391 $ POA Glow Plug 200 & 300 Tdi, Proline PLH391 $
22. Bracket Rear Cylinder Head 200 Tdi, Genuine RNX330 $ 49.14 23. Bolt M8 x 25mm, Genuine RNN343 $ 4.69 Bolt M8 x 25mm, ProLine PLN343 $ 0.31 24. Bracket Front Cylinder Head 200 Tdi, Genuine RNX333 $ 27.55 25. Bracket Center Cylinder Head 200 Tdi, Genuine RNX895 $ 77.33 26. Adapter Rear Cyl Head-Heater Hose 2.25L, Series & Defender RNC663 $ 19.43 27. Copper Sealing Washer Drain Plug, Genuine RNB544 $ 2.32 28. Stud Fuel Injector Clamp 200 Tdi, Genuine RNX334 $ 12.10 29. Rubber Plug Cylinder Head 200 Tdi, Proline PLX760 $ 1.02 30. Rebuilt Cylinder Head 200Tdi 200TDICYL $ 1489.00 Defender 200Tdi Cylinder Head B 1 2 17 22 23 26 27 15 13 14 19 15 11 24 30 8 9 12 10 29 25 20 18 16 21 28 7 6 5 4 3 RNN330 Rebuilt 200Tdi Cylinder Head 200TDICYL $ 1489.00 200TDICYL Defender 200Tdi Timing Belt, Tensioner 1 2 3 4 B Defender 200Tdi Timing Belt, Tensioner 1. Timing Belt 200Tdi, Genuine .....................................................................RNL477 $
Timing Belt
ProLine
2. Tensioner Timing Belt
$
Belt
3.
4.
30.85
POA
200Tdi,
PLL477 $ 30.89
200Tdi, Genuine RNL539
199.78 Tensioner Timing
200Tdi, ProLine PLL539 $ 54.95

C

300Tdi Engine Cylinder Head

1. Cylinder head-complete assembly 300 Tdi 300TDICYL $ 899.00

2. Guide-cylinder head valve, Genuine RNH981 $ 26.50

Guide-cylinder head valve, ProLine PLH981 $ 6.75

3. Insert-inlet valve seat-cylinder head, Genuine RNX327 $ 16.88

4. Insert-cylinder head exhaust valve seat, Genuine RNX607 $ 12.57

5. Plug-core, Genuine RNC238 $ 4.51

6. Plug-core, Genuine RNC234 $ 8.83

7. Stud, M8 x 25, Genuine RNX328 $ 1.60

8. Stud, M10 x 35, Genuine RNX329 $ 3.35 Stud, M10 x 35, ProLine PLX329 $ 0.90

9. Bolt-cylinder head fixing, M12 x 100, Genuine RNL059 $ 15.77 Bolt-cylinder head fixing, M12 x 100, ProLine .......................................PLL059 $ 4.07

10. Bolt-cylinder head fixing, M12 x 140, Genuine RNL064 $ 15.30

Bolt-cylinder head fixing, M12 x 140, ProLine PLL064 $ 4.62

11. Bolt-cylinder head fixing, M10 x 117, Genuine RNL077 $ 14.10

Bolt-cylinder head fixing, M10 x 117, ProLine PLL077 $ 5.10

12. Gasket-cylinder Head, 2 Holes, 1.40mm, Genuine RNH705 $ 115.69

Gasket-cylinder Head, 2 Holes, 1.40mm, ProLine PLH705 $ 39.50

Gasket-cylinder Head, 1 Hole, 1.30mm, Genuine .................................RNH704 $ 122.51

Gasket-cylinder Head, 1 Hole, 1.30mm, ProLine PLH704 $ 49.95

Gasket-cylinder Head, 2 Holes, 1.60mm, Genuine RNH707 $ 115.69

Gasket-cylinder Head, 2 Holes, 1.60mm, ProLine PLH707 $ 49.95

Gasket-cylinder Head, 3 Holes, 1.50mm, Genuine RNH706 $ 115.69

Gasket-cylinder Head, 3 Holes, 1.50mm, ProLine PLH706 $ 39.50

13. Cable-heater plug ignition, Genuine RNN334 $ 34.68 Cable-heater plug ignition, ProLine .........................................................PLN334 $ 31.00 14. Nut-hexagonal, M4, Genuine RNI606 $ 0.83 15. Washer-Plain, M4, Genuine RNH040 $ 1.01 16. Washer-shakeproof, M4, Genuine RNI607 $ 1.46 17. Glow Plug-heater ignition, 12V, ProLine PLH391 $ 30.85 18. Bracket-Lifting Engine Rear, Genuine RNX330 $ 49.14

Defender Ultimate 300Tdi Cylinder Head Kit

Dramatically enhance the performance of your 300Tdi with our Ultimate Tdi Cylinder Head Kit. Includes 2.8 Liter cylinder head assembly, Garret variable nozzle turbo as sembly with waste gate, exhaust manifold, intake hoses, head bolts, associated hard ware and instructions. Fits Defender 300Tdi engines. NOTE: Requires a new head gasket. Please identify the type of head gasket you require when ordering. Head gas kets vary in thickness as determined by the engine block surface height. Head gaskets are identified by the number of holes in a tab protruding from the head gasket on the right side of the engine. Our specialist will be happy to help you with any questions you may have about this product. RNE28TDI $ 16590.00

NEW Complete 300Tdi Cylinder Head Assembly

New, ready to bolt on, cylinder head assembly. All new installed valves, guides, springs seats and caps. Includes head bolts. Made in the UK. FITS: 2.5 liter 300Tdi diesel engine. NOTE: Requires 3 hole head gasket RNH706 or PLH706. 300TDICYL $ 899.00

Defender 300Tdi Long Block Assembly

PLH516 $ 5999.00

300TDICYL

Performance

Intercooler Assembly

for 200, 300 Tdi

Performance Intercooler Assembly for 300 Tdi

PLQ944HP

PLQ944HP $ 549.00

Silicone Intercooler Hose Kit, Black, 300 Tdi RNA3171 $ 89.95

Rubber Bushing Mount (Each; 8 required) RNC471 $ 0.94

Adaptor Kit for 200 Tdi Installation PLQ944HPHK $ 299.00

Silicone Intercooler Hose Kit, Black, 200 Tdi RNA3170 $ 89.95

RNH391 RNN330

(800) 403-7591 roversnorth.com 85 Defender 300Tdi Cylinder Head C Defender 300Tdi Cylinder Head
19.
.................................................................................PLN343
20.
21.
22.
23.
24.
25. Adaptor-pipe
...............................................................RNC663
26.
27.
28. Bolt
29. Plug-Drain,
28 27 1 23 24 3 4 8 12 7 8 25 6 10 20 19 21 31 32 29 5 11 2 17 26 15 14 16 9 22 33 34 35 36 37 38 Defender 300Tdi Cylinder Head continued 30. Washer-sealing, Genuine RND457 $ 5.03 Washer-sealing, ProLine PLD457 $ 1.49 31. Sensor-Temperature, Genuine RNL312 $ 66.61 Sensor-Temperature, ProLine PLN312 $ 6.08 32. Washer-sealing, Genuine .........................................................................RNX336 $ 5.67 33. Cover assembly-valve rocker RNX337 $ POA 34. Gasket-engine rocker cover, Genuine RNL067 $ 31.41 Gasket-engine rocker cover, ProLine PLN067 $
35. Cap-oil filler,
$
Cap-oil filler,
36. Screw,
$
37. Washer-sealing,
.........................................................................RNN332 $
38. Cover-engine
Bolt, M8 x 25, Genuine RNN343 $ 4.69 Bolt, M8 x 25, ProLine
$ 0.31
Clip, Genuine RNX331 $ 1.64
Bracket-clipping, Genuine RNI608 $ 1.59
Spacer, Genuine RNX332 $ 11.18
Bracket-lifting engine front, Genuine RNX333 $ 27.55
Flange Bolt, M8 x 20mm, Genuine RND942 $ 2.69 Flange Bolt, M8 x 20mm, ProLine PLD942 $ 0.99
coolant, Genuine
$ 19.43
Injector clamp, Genuine RNX334 $ 12.10
Bracket Harness, Genuine RNQ057 $ 15.81
, M8 X 16, Genuine RNE092 $ 3.11
Genuine RNX335 $ 10.30
39.95
Genuine RNN330
20.28
ProLine PLN330 $ 16.00
Genuine RNX338
15.56
Genuine
8.07 Washer-sealing, ProLine PLN332 $ 2.80
, top, ProLine PLX339 $ 239.00

LHD RNACKIT $ 3699.00 AC Base Kit Less Compressor, RHD. RNACKITRHD $ 3895.00

Defender Dashboard Lever Vent Control Fits Defender 1983 1998. RNI037 $ 103.59 Wiper Motor Lower Dash Cover, LHD Up to 1996 RNI059 $ 294.88 Radio Housing Mount Genuine RNH512 $ 121.85 Fuse Box Cover Knobs Genuine RNE351 $ 18.03 Ea Alloy Set RNA1133 $ 36.50 Heater Control Assembly Defender 90, 110 NAS, LHD, Genuine RNF412 $ 203.94 Ea LHD, ProLine PLF412 $ 175.10 Ea RHD, Genuine RNY227 $ 203.94 Ea RNH512 Lev-O-Gage RNA2050L $ 15.99 Finisher Lower Dash, LHD RNI597 $ 24.99 Defender Late Style Dash Top Fits all Defenders 1983 2006, LHD and RHD. Genuine. PLH7672 $ 579.00 Fuse Box Cover RNF446 $ 71.95 RNE351 RNA1133 Three Pedal Pad Set RNK8225 $ 42.95 Shifter Boot kit RNK8220 $ 118.50 Defender Air Conditioning Kits Update your Defender with the latest R134A OEM Air Conditioning system. Features better ventilation and blower capacity for faster, colder air. Includes: Lower dash fascia unit, blowers, compressor, lines, hoses, fittings, pulley, ten sioner belt, evaporator, condensor and fan unit, receiver-drier, all hardware and fitting instructions. 200 Tdi, RHD RNAC200R $ 4489.00 200 Tdi, LHD RNAC200 $ 3999.95 300 Tdi, RHD RNAC300R $ 4489.00 300 Tdi, LHD RNAC300 $ 4550.00 Td5, RHD RNAC500R $ 4290.00 Td5, LHD RNAC500 $ 4290.00 NAS, 4.0L V8, LHD RNAC40 $ 4799.00 NAS, 3.9L V8, LHD RNAC39 $ 4390.00 AC Base Kit Less Compressor,
PLI586 RNI597 RNI059 Automatic Transmission Gaiter, Genuine RNY226 $ 243.62 Polished Alloy Gear Knob Set R380 RNA5500 $ 86.50 LT77 RNA6600 $ 89.95 Differential Lock Warning Label RNC924 $ 8.96 Defender Lower Dashboard New Defender lower dashboard assembly without right hand speaker hole. Lower padded LHD dash assembly for Defender. Exact replacement is patterned for gauges, clock and radio cut outs. Includes heater channel with metal top cover with assembled heater flaps and actuation cable. Complete with the top edge plastic trim piece. High-quality OEM exact replacement in Satin Black. FITS: Defender, all Left Hand Drive models with wiper motor located in lower left dash and 2 large outside fresh air vents in dash 1983 1998 PLI586 $ 1259.00 PLH7672 RNI650 PLY011 RNB293 Demister Vent Top RNI650 $ 23.76 Ashtray RNC953 $ 65.12 Defender LHD Dash Vent Panel PLY011 $ 379.00 Vent Demister Nozzle RH, Genuine RNX646 $ 53.08 LH, Genuine RNX645 $ 53.08 Grab Handle RH Genuine RNI654 $ 154.44 End Cap Facia LH Genuine RNI652 $ 31.73 LR Badge Genuine RNI655 $ 3.22 AC Vent Louvers 1997 D90 NAS Auto RNB293 $ 90.86 1993 D110, ‘94 D90 NAS RNI668 $ 59.95 RNI668 RNF412 86 roversnorth.com The Source for Classic Land Rover Parts

, M5, Genuine RND112

Digital Speedometer Kit for Defender, MPH

Non-ECU Defenders can step into the future with Rovers North's complete speedometer solu tion. This bright, easy-to-read, water-resistant (sealed) gauge is not only accurate, it is driven by an electrical signal for smooth needle movement; no more annoying needle-bob from the cable driven speedometer. Users can easily adjust the built-in clock, the brightness of the LED illumination, the dial color and screen color. The convenient auto-calibration feature means changes to gear ratios or tires sizes are no big deal; your speedometer will be accurate again with just a few pokes of the button and driving a mile.

This kit includes a VDO SingleViu 90mph Speedometer, our custom wiring harness, and VDO Hall effect sensor. For convenience, Rovers North has preconfigured the gauges and included easy-to-follow instructions. Installation should take about an hour or less. We can even pre-program your odometer reading!

0.38

Nutsert Series, Defender, Genuine RNC946 $ 3.65 Plastic Nutsert Series, Defender, ProLine PLC946 $ 0.39

7. Instrument Cowl Stiffener LHD Defender, Genuine RNI624 $ 185.37

Instrument Cowl Stiffener RHD Defender, Genuine RNY228 $ 68.36

8. Screw #8 x 5/8", LHD with A/C, D110 NAS, Genuine RNI626 $ 2.41

Screw Self Tapping Interior Bracket Defender, RHD with A/C, D90 NAS, Genuine .................................................................................RNI205 $ 0.69 9. Washer Defender Dash Cowl, Genuine RNI627 $ 0.83 10. Spring Nut Dash Cowl Defender, Genuine RNI628 $ 0.83 11. Instrument Cluster Panel LHD, up to 1998, D110 NAS, Genuine RNI629 $ 172.75

Instrument Cluster Panel LHD Defender, D90 NAS, ProLine PLI629 $ 149.00

Instrument Cluster Panel Kit LHD Defender, D90 NAS, ProLine PLI629K $ 269.95

Instrument Cluster Panel LHD Defender 1999 2006, Genuine RNI740 $ 208.54 Instrument Cluster Panel RHD up to WA159806, Genuine RNS868 $ 172.75 Instrument Cluster Panel RHD Defender 1999 2006, Genuine RNY229 $ 155.91

The speedometer wiring harness included in this kit is designed to seamlessly integrate with the wiring harness of Rovers North's digital three gauge kit. This kit will incorpo rate matching volts meter, water temp and fuel level gauges. Adding these three modern instruments will be as simple as swapping the gauges, plugging in a tidy new wiring harness, connecting the sender wires for your water temp and fuel level, and removing some of the redundant wiring. For more information, see our website.

Digital Speedometer Kit for Early Defender w/o ECU 1983 1996 RNDSKIT2 $ 499.00 Digital Three Gauge Kit for Defender RNDSKIT3 $ 499.00

above, now available in KPH. This kit includes a VDO SingleViu 200KPH Speedometer, our custom wiring harness, and VDO Hall effect sensor. For convenience Rovers North has pre-configured the gauges and included easy to follow instructions. Installation should take about an hour or less. We can even pre-program your odometer reading! For odometer programming, be sure to add RNDSKITP to

RNDSKIT2
Kit
your
.........................................RNDSKIT2KPH $ 499.00 Water Temp Gauge D90 Auto, 1997 4.0L V8 Genuine RNC863 $ 415.79 4-Cylinder, ProLine PLC856 $ 145.95 A Defender Gauge Panel A Defender Dashboard Gauge Panel 1. Instrument Panel Cowl Defender LHD With A/C, Genuine RNI620 $ 117.35 Instrument Panel Cowl
3.
4.
5.
Digital Speedometer
Defender, Kilometers Same kit as
order as the odometer needs to be programmed before it ships. Digital Speedometer Kit for Defender, KPH
Defender, with two large outside air vents in upper dash, Genuine RNI621 $ 116.95 Instrument Panel Cowl Defender, Powder Coated Aluminum, with two large outside air vents in upper dash, ProLine PLI621A $ 79.90 2. Screw, Instrument Panel Cowl, Defender, Genuine RNI622 $ 3.67
Plain Washer, Genuine RNI623 $ 0.95
Lock Washer 5mm, Genuine RND115 $ 2.75
Nut
$
6. Plastic
12.
13.
14.
15.
Genuine....................................RNI634 $ 0.83 16. Washer Shakeproof Defender Dash Cowl, Genuine RNI635 $ 0.83 17. Screw M5 x 16mm, Genuine RNE033 $ 3.52 18. Heater Control Label Defender, ProLine PLE331 $ 8.50 19. Label Fan Control Defender, ProLine PLE332 $ 8.50 5 4 17 11 19 14 16 15 12 8 9 10 7 6 3 4 2 1 14 13 18 14 Cowl Panel Genuine RNI621 $ 116.95 Instrument Cluster Panel ProLine PLI629 $ 149.00 Kit w/cowl PLI629K $ 269.95 Speedometer Defender 1983-1996 Defender, ProLine PLE515 $ 399.00 1997 D90 NAS Genuine RNC862 $ 1136.91 PLE515 Fuel Level Gauge 1987-2006 Defender Genuine RNE513 $ 336.62 ProLine PLE513 $ 94.95 Instrument Panel Cowl Powder Coated Aluminum Upgraded aluminum instrument panel cowl for LHD and RHD Defender. This part replaces the plastic cowl that typically cracks upon removal or installation. Powder coat finish. Made in the UK. PLI621A $ 79.90 PLE331 PLE332 RNDSKIT3 (800) 403-7591 roversnorth.com 87 NEW H NEW H
Screw, Genuine RNI631 $ 0.83
Washer Dash Screw Cup Type Defender, Genuine RNI632 $ 2.10
Fixed Nut Instrument Bezel Defender, Genuine RNI633 $ 3.80 Fixed Nut Instrument Bezel Defender, ProLine PLI633 $ 3.35
Self Tapping Screw Number 6 x 1/2",

Premium Defender OEM Marsland Galvanized Chassis

The ultimate replacement chassis OEM manufactured with hot dipped galvanized finish. This is a complete upgrade, offering the latest in chassis structural tech nology from Land Rover, for owners who want to improve their Defender chassis. Stronger, with reinforced bulkhead outriggers and body mounts. Safer, with improved crash performance. Features the latest Puma rear cross-member with integral weld nuts for convenient mounting of tow or recovery equipment. Plus, a recessed mounting point for your trailer electric plug, so it is no longer exposed underneath. Made in the UK for Rovers North.

Defender 90 Chassis: Fits all body styles

NAS 90 V8, Includes Galvanized Gearbox Crossmember, Stainless Steel Fuel Tank Plate

RNS365 $ 4590.00

NAS 90 V8, Includes Stainless Steel Fuel Tank Plate RNS355 $ 4198.00

90 200 Tdi, 2.5 Turbo, 2.5 NA, and 2.5, 2.3 Petrol

90 300 Tdi, with side tank

Defender 90 NAS RNS365 (chassis shown). Includes Both Galvanized Crossmember

RNS561 $ 4198.00

RNX385 $ 3795.00

90 300 Tdi, Rear tank, Includes Stainless Steel Fuel Tank Plate .........ANR4742P $ 4190.00

90 PUMA, Includes Stainless Steel Fuel Tank Plate

RNX424 $ 4150.00

90 Blank Chassis with Threaded Plates for Engine Conversions RNX978 $ 4198.00

Defender 110 Chassis: Fits all body styles

NAS 110 V8, Includes Galv. Gearbox Crossmember and galvanized fuel tank plate

NAS 110 V8, w/o Galv. Gearbox Crossmember, includes galvanized fuel tank plate

NAS 110 V8, Inc. Galv. Gearbox Crossmember for upgraded plastic fuel tank*

110 300 Tdi, for steel tank

110 300 Tdi, for upgraded plastic fuel tank*

RNH710 $ 4859.00

RNH699 $ 4690.00

RNS562 $ 5900.00

RNH697 $ 4579.00

RNS564 $ 4999.00

Tray
Gearbox Crossmember Standard on all Chassis, except V8 (optional) Premium Defender OEM Marsland Galvanized Chassis PLI243 RNS365 Reinforced Outriggers Hot Dipped Galvanized Includes Bolt-on Fuel Tank Protection Plate on All Rear Plastic Tank Chassis (110 also includes galvanized top-tank strap) 88 roversnorth.com The Source for Classic Land Rover Parts 88 II, 1959 1961 PLE4162 $ 3450.00 88 IIA III PLE416 $ 3450.00 88 IIA-III, OEM Marsland ..............................................................RNE416 $ 3890.00 109 IIA 6-Cylinder Station Wagon PLQ322 $ 4550.00 109 III 6-Cylinder, Station Wagon PLH416 $ 4350.00 109 IIA III, Regular PLE412 $ 4479.00 109 IIA III, Station Wagon PLE413 $ 4980.00 109 IIA III Military PLE414 $ 4520.00 Air Portable and Series I Chassis Available by Special Order Extra Strength Improved Rear Body Supports Features OEM Center Seam Welds, Full Internal Reinforcement Baffles for Improved Structural Strength and Crash Performance Series II-III Galvanized Chassis All our chassis are shipped via truck freight and packed to travel. Defender 110 Chassis: Fits all body styles, continued 110 200 Tdi, 2.5 Turbo, 2.5 NA, and 2.5, 2.3 Petrol for steel tank RNS563 $ 4690.00 110 PUMA PLQ549 $ 4670.00 110 Blank Chassis with Threaded Plates for Engine Conversions RNX979 $ 5390.00 *Upgraded Genuine plastic fuel tank kit Includes: fuel tank, pump, sender unit, mounting bracket, rear sway bar and harness link ........RNK4297 $ 1298.95
PLI243 AND Stainless Steel Fuel Tank
PLB346 Included w/RNS365, RNH710, RNS562. Optional Extra w/RNS355, RNH699 PLI243 $ 359.95

Rear Cross member Defender 110 With 15 Inch Extensions, Pre Td5 1983-1998

Defender Dual Battery Tray Kit

Black non-galvanized

PLH619110 $ 429.00 Galvanized with 15” Extensions

Rear Crossmember Defender 90 Plastic Tank

Weld-on replacement rear cross member with extensions for Defender 90 models fitted with a rear plastic fuel tank. Includes fuel tank mounts, upper spring mounts, axle stop mounts and forward slide in extensions for easier installation. Made in the UK. FITS: Defender 90 NAS, Td5 and TDCi 1994-2016 with rear plastic fuel tank. NOTE: Fitment to 1994 1997 NAS requires updated fuel tank protection plate PLB346.

Rear Crossmember D90 PLS21490 $ 759.00 Cradle Rear Tank for 90 Chassis, Genuine RNB346 $ 229.95 Stainless Steel Cradle Rear Tank for 90 Chassis, ProLine PLB346 $ 419.00

Rear

This dual battery tray will only work with PLS340A, due to the larger size of the receptacle for the batteries. If you would like to fit two batteries in your battery box, this is a great upgrade. This kit is easy to assemble and is made from 2mm thick aluminum. It fits into the seat box under the left hand seat. Supplied in four pieces with pop rivets. Made in the UK. RNA0089C $ 109.00

Defender Seatbox Alloy Lid Kit

Seat box lid kit. Convert your steel seat box lids to aluminum alloy lids. Perfect match for RNA0050 flat pack seat box kit. Includes rivets, alloy securing brackets, Defender style hasps, and gaskets. Made in the UK. FITS: Defender all models 1983 2016. RNA0050L $ 239.00

Defender Battery Tray Kit

A great upgrade for any Defender. This easy-to-as sembly battery box kit is made from 2mm thick aluminium. Sup plied in four pieces with pop rivets to make fitment simple. This kit fits into the seat box under the left hand seat and is updated to the latest, slightly deeper Land Rover design to accommodate larger batteries. Made in the UK. Battery Tray Kit, Defender RNA0089A $ 107.70

Rear

Crossmember With 18 Inch Extensions Series II-III 88"

Rear Chassis Frame crossmember for 88” Black Finish. Exact replacement boxed chassis section. Features 18” exten sions that include 88 spring perches with spring bushings fitted. Made in the UK. FITS: Series II Military models. NOTE: For 109 Civilian models use NRC236-6 or remove included 88” spring perches when installing. RNE404 $ 379.00

Rear Crossmember

Range Rover Classic

Weld

Rear Crossmember Series IIIII Military 88 & 109

Weld-on replacement for Standard Mili tary rear chassis crossmember. Meas ures 61.25 inches wide. Includes 10” extensions for easier installation. Hot dipped galvanized finish for superior corrosion resistance. Made in the UK. Not suitable for Air Portable models which measure 59” wide. For Military Air Portable (Lightweight) use CHAS07. FITS: Series II- III Military 88 and 109 FFR and GS models, except 88” Air Portable (Lightweight) and 101 FC. CHAS23 $ 299.95

Radiator Repair Panels

Weld-in replacement for lower section of radiator panel. Series IIA & III w/headlamps in the wings

CHAS43 $ 72.05 Series IIA & III w/headlamps in the grille. CHAS42 $ 56.60

“Great service, very knowledgable and they have lots of parts in stock. “ -Stephen, USA (800) 403-7591 roversnorth.com

89
PLB473 PLB672A
CHAS43
.................................................................PLH619110HD $ 498.00
and
models
$
Rear Crossmember 6" Extension 109” FITS: Series II III 88
109
1959 1984 except Military and 109,110 Forward Control models. NRC236-6
180.00
on identical chassis repair section. This box steel section fits to the rear of all Range Rover Classic models body frames. This is the section that the lower tailgate mounts to. Made in the UK
Crossmember Defender 90 With 20" Extensions 19831998 Non-NAS Black non-galvanized with 20” Extensions Galvanized with 20” Extensions
Chassis Replacement Parts
RNA0089A
RNA0050L
Military
rear
for Military Air Portable
Series II-III Replacement Front Radiator Panels Replacement steel radiator panels. Made in the UK. Early Series II, IIA, NADA spec, ProLine PLB473 $ 483.07 Early Series IIA European spec, ProLine PLB472 $ POA Series IIA, III 2.25, 2.6, ProLine PLB959 $ 483.07 Cloth Strip Bonnet-Grille Panel, ProLine PLB672A $ 14.99 Clip - Bonnet Cloth Strip, Series II III (qty 10 req.), Genuine.....................RNB886 $ 1.04 Clip - Bonnet Cloth Strip, Series II III (qty 10 req.), ProLine PLB886 $ 1.29 RNB886
Rear Crossmember Series IIA III
88 Lightweight With 10" Extensions Weld-on replacement
chassis crossmember
models. Measures 59" wide. Includes 10 inch extensions for easier installation. Made in the UK. For standard Military 88 and 109 GS and FFR models use CHAS23. FITS: Series IIA able (lightweight) only. CHAS07 $ 289.00

A Defender Seatbox

1. Front RH Floor Panel, V8 Petrol with LT 85 gearbox only RNS299 $ 178.13

Front RH Floor Panel, NAS V8, 300Tdi, Td5, ProLine PLS300 $ 54.95

2. Front LH Floor Panel, V8 Petrol with LT 85 gearbox only, Genuine RNS301 $ 235.38

Front LH Floor Panel, NAS V8, 300Tdi, Td5, Genuine RNS302 $ 170.21

Front LH Floor Panel, NAS V8, 300Tdi, Td5, ProLine PLS302 $ 54.95

Front LH Floor Panel, All 4CYL except 300Tdi, ProLine PLS303 $ 72.00

Floor Screw Kit, Defender 90, V8 RNK890 $ 259.95

Floor Screw Kit, Defender 110, V8 ...........................................................RNK8110 $ 189.95

3. Self Tapping Screw up to #3A654045, Genuine RNH042 $ 3.67

Self Tapping Screw up to #3A654045, ProLine PLH042 $ 0.44

Self Tapping Screw from #3A654046, ProLine PLS304 $ 72.00

4. Plain Washer 6M, Genuine RNN986 $ 0.83

5. Lokut Nut, Genuine RNC946 $ 3.65

Lokut Nut, ProLine PLC946 $ 0.39

6. Screw M6x20mm, Genuine RNH483 $ 6.95

7. Washer M6, Genuine RNF420 $ 1.97

8. Sprung Washer M6, Genuine RNF428 $ 1.84

Sprung Washer M6, ProLine PLF428 $ 0.35

9. Hex Nut M6, Genuine RNF731 $ 1.29

Hex Nut M6, ProLine ...................................................................................PLF731 $ 0.68

10. Bolt, up to #3A654045, Genuine RNB701 $ 1.49

Bolt, up to #3A654045, ProLine PLB701 $ 0.46

Bolt, from #3A654046, ProLine PLS304 $ 72.00

11. Washer M6, Genuine RNF420 $ 1.97

12. Spiralok Nut 110, ProLine PLS305 $ 2.06

Spire Nut 90, Genuine RNB681 $ 3.10

Spire Nut 90, ProLine PLB681 $ 0.45

13. Seal - Cut to Length, Genuine RNN985 $ 16.35

Defender Seatbox Assembly

14. Center Seatbox Lid Assembly w/o Cubby Box up to 2007 RNS315 $ 93.87

Center Seatbox Lid Assembly For Cubby Box up to 2007 RNS316 $ 74.64

Center Seatbox Lid Assembly From 2007 2016, Genuine RNS317 $ 76.59

Center Seatbox Lid Assembly From 2007 2016, ProLine ....................PLS317 $ 59.00

15. Battery Compartment Lid, Genuine RNS318 $ 55.63

16. Locker Lid for Vehicles w/RH Side Fuel Tank, Genuine RNS320 $ 295.18

Locker Lid for Vehicles w/RH Tool Box, 1983 1998, Genuine RNS321 $ 286.79

Locker Lid Assembly w/RH Tool Box, 1999 2016, Genuine RNS322 $ 67.87

17. Self Taping Screw, Genuine RNC795 $ 1.17

18. Washer M6, Genuine RNF420 $ 1.97

19. Spiralok Nut, Genuine RNS323 $ 1.71

20. Rear Seat Stop to #HA455945, Genuine RNS324 $ POA

Rear Seat Stop from #HA455946, Genuine RNS325 $ 43.43

21. Overcenter Catch, Genuine

RNS326 $ 15.72

Overcenter Catch, ProLine PLS326 $ 11.95

22. Pop Rivet, Genuine RNS327 $ 1.64

23. Blanking Plug 13mm, Genuine RNB875 $ 0.81

Blanking Plug 50mm, Genuine RNB883 $ 2.41

Blanking Plug 14mm, Genuine RNB876 $ 0.81

Blanking Plug 30mm, ProLine PLN686 $ 2.49 Blanking Plug 25.5mm, Genuine RNB880 $ 2.41 24. Pop Rivet, Genuine......................................................................................RNC690 $ 0.65

Pop Rivet, ProLine PLC690 $ 0.38 25. Screw M6, Genuine RND909 $ 1.23 26. Plain Washer, Genuine RNI804 $ 1.42 27. Spring Washer M6, Genuine RNF428 $ 1.84

Spring Washer M6, ProLine PLF428 $ 0.35 28. Hex Nut M6 up to 2007, Genuine RNF731 $ 1.29 Hex Nut M6 up to 2007, ProLine PLF731 $ 0.68

Flange Nut from 2007 on, Genuine RNS331 $ 2.08 29. Blanking Plug from 2002 on, Genuine PLN785 $ 5.99

Flange Nut from 2007 on, Genuine RNS332 $ 1.64 30. Screw M6 x 20MM RND909 $ 1.23

Screw M6 x 25MM ......................................................................................RND758 $ 2.36

Plain Washer RNF434 $ 0.74 32. Washer - Spring M6, Genuine RNF428 $ 1.84

Washer - Spring M6, ProLine PLF428 $ 0.35

Lokut Nut RNS338 $ 2.41

Screw M6x20MM RND909 $ 1.23

Washer RNI804 $ 1.42

Spring Washer M6, Genuine RNF428 $ 1.84 Spring Washer M6, ProLine PLF428 $ 0.35

Hex Nut M6, Genuine RNF731 $ 1.29 Hex Nut M6, ProLine PLF731 $ 0.68

Battery Box Assembly, all Models, Genuine RNS340 $ 154.26 Battery Box DIY Kit for Seatbase, Aluminum PLS340A $ 205.00 39. Seal .................................................................................................................RNN985 $ 16.35 40. Seatbox Assembly with Left Hand Battery Box for vehicles with side fuel tank 4 Cylinder models, Genuine RNS344 $ POA V8, Genuine RNS346 $ POA Seatbox Assembly w/LH Battery Box and RH Tool Box for vehicles with rear fuel tank V8, Tdi, Puma, Genuine RNS349 $ 3434.53 41. Harness Grommet, Genuine RNS352 $ 21.51 42. Tool Box Assembly Right Hand, Genuine RNS132 $ POA Tool Box Assembly Right Hand, Aluminum, ProLine PLS132A $ 159.00 Tool Box Center Seat Series II, III, Aluminum, ProLine PLB863 $ 79.50

90 roversnorth.com The Source for Classic Land Rover Parts Defender Seatbox
31.
A 1 10 11 13 40 13 13 14 17 18 19 20 21 21 22 15 16 13 23 25 24 12 2 25 26 27 28 22 38 39 42 41 30 34 36 37 35 31 32 33 29 3 4 5 6 7 8 9 Defender Seatbox Assembly Repair Panel RH Seatbox, Series II III & Defender CHAS37 $ 41.15 Repair Panel LH Seatbox, Series II III & Defender CHAS38 $ 41.18 Battery Box DIY Kit for Seatbase, Includes Rivets, Aluminum PLS340A $ 205.00 Tool Box Seatbase RHF Aluminum, ProLine PLS132A $ 159.00 Seatbase Repair Panels, Toolbox, Battery Box Kits CHAS38 PLS340A PLS132A Battery Box DIY Kit for Seatbase
33.
34.
35.
36.
37.
38.

ProLine bulkheads are hot dipped galvanized steel, epoxy primed.

RNF0027

20. Galvanized Floor Panel, LH, Series II, IIA, III RNF0002 $ 69.95

Galvanized Floor Panel, RH, Series II, IIA, III RNF0003 $ 69.95

Galvanized Quick Repair Toe Board, LH, Series II III FLOOR2 $ 59.95

21. Dash Vent Lid Assembly, RH, Genuine RNN703 $ 147.95

Dash Vent Lid Assembly, LH, Genuine RNN704 $ 147.95

22. Bulkhead Mounting Bracket, RH, Galvanized PLQ692 $ 49.00

Bulkhead Mounting Bracket, LH, Galvanized .........................PLQ693 $ 49.00

23. Dash Vent-Bulkhead Seal, Foam Type, Genuine RNE365 $ 22.95

Dash Vent-Bulkhead Seal, Foam Type, ProLine PLE365 $ 15.75

Dash Vent Seal, ProLine PLB739 $ 19.95

Dash Vent-Bulkhead Seal, Rubber Type, ProLine PLB332 $ 24.50

24. Galvanized Reinforcement Top Plate Set, LHD Series IIA RNF0027 $ 139.00

Bumper Door Check Strap, Series IIA, ProLine PLX844 $ 13.25

Clevis Pin, Stainless Steel Door Check, Series II, IIA PLX845 $ 19.50

Rod, Door Stop, Series II, IIA, ProLine PLX915 $ 59.00

Stainless Bulkhead to Chassis Hardware, ProLine RNA0133 $ 25.50

Stainless Bolt Kit Bulkhead to Chassis Bracket, ProLine RNA0145 $ 20.50

Stainless Bolt Kit Front Wings to Bulkhead, Series RNA0146 $ 37.50

B Series Galvanized Bulkheads and Repair Panels

1. Series II IIA Positive Earth 1959-1966 LHD, ProLine PLX907LHD $ 3195.00

Series II IIA Positive 1959-’66 LHD, Galvanized, ProLine PLX907LHDG $ 2995.00

Series II IIA Positive Earth 1959 1966 RHD, ProLine PLX907RHD $ 3195.00

Series IIA Negative Earth 1967-1971 LHD, ProLine PLX908LHD $ 3195.00

Series IIA Negative Earth 1967 1971 RHD, ProLine PLX908RHD $ 3195.00

Series III 1972-1984 LHD, ProLine PLX909LHD $ 3199.00

Series III 1972 1984 RHD, ProLine PLX909RHD $ 3199.00

2. Galvanized Kick Panel, LH, Series II, IIA, III RNF0001 $ POA

Galvanized Kick Panel, RH, Series II, IIA, III ............................RNF0004 $ POA

Galvanized Simplified Quick Repair Panel, RH, Series FLOOR4 $ 57.95

3. Galvanized Footwell Top LH, Series LHD FLOOR7 $ 79.50

Galvanized Footwell Top RH, Series LHD FLOOR8 $ POA

Galvanized Footwell Top LH, Series LHD FLOOR7R $ 69.95

4. Door Post Assembly, LH, Series IIA III, Defender CHAS17 $ 269.95

Door Post Assembly, RH, Series IIA III, Defender CHAS18 $ 269.95

5. Door Frame Repair Kit, Front & Rear Door CHAS24 $ 89.95

6. Repair Piece, LH Bulkhead Series IIA & III CHAS36 $ 34.95

7. Repair Piece, RH Bulkhead Series IIA & III CHAS35 $ 34.95

8. Bulkhead Panel, LH Center Series II, IIA, III RNF0007 $ 54.00

9. Bulkhead Panel, RH Center Series II, IIA, III RNF0009 $ 59.90 10. Bulkhead Panel, Center Series II, IIA, III RNF0008 $ 119.95 11. Center Bulkhead Assembly, Series II, IIA, III ........................RNF0010 $ 289.00 12. Nut 1/2” UNF, Genuine RNF459 $ 3.51 Nut 1/2” UNF, ProLine PLF459 $ 1.29 13. Plain Washer, Genuine RNF460 $ 0.83

14. Bolt, Bulkhead-Outigger, Series II, IIA, III, Genuine RNF461 $ 7.12

15. Galvanized Footwell Assembly, LH, Series RHD RNF0005R $ 254.95

Galvanized Footwell Assembly, RH, Series RHD RNF0006R $ 289.95

Stainless Steel Footwell Assembly, LH, Ser II III LHD RNF0005S $ 179.00

Stainless Steel Footwell Assembly, RH, Ser II III LHD RNF0006S $ 179.00

Economy Footwell Assm RH, Ser LHD 2-Piece, ProLine RNF0006A $ 79.00

Economy Footwell Assm LH, Ser LHD 2-Piece, ProLine RNF0005A $ 79.00

16. Foot Assembly, RH Front Door Post, Series II III 1958-84 CHAS32 $ 39.00

Foot Assembly, LH Front Door Post, Series II III 1958-84 CHAS33 $ 39.00

17. Door Post Front RH, Series IIA, III, 1959 84, ProLine ............CHAS30 $ 79.99

Door Post Front LH, Series IIA, III, 1959 84, ProLine CHAS31 $ 79.99

18. Bulkhead Vent Repair Panel Set, Series & Defender CHAS34 $ 149.00

19. Pin, Dash Vent Hinge, Series & Defender, Genuine RNB846 $ 12.93

Pin, Dash Vent Hinge, Series & Defender, ProLine PLB846 $ 3.75

Bulkhead Vent Pin Hinge Kit, Stainless Steel RNA1179 $ 34.95

CHAS17 CHAS36

CHAS24

Series Door Frame Repair Section

Replace rusted or damaged bottom door frames with these mild steel door repair sec tions. These come in 59" lengths which is enough to do the bottom frame and roughly 12" per side. Requires welding. Made in the UK. FITS: All Series doors & rear Defender full doors up until TD5.

CHAS51 $ 49.00

Defender Door Frame Repair Section

Replace rusted or damaged bottom door frames with these mild steel door repair sections. These are designed to match the Defender door frame profile exactly and come in 59" lengths. 59" is enough to do the bottom frame and roughly 12" per side. Requires welding. Made in the UK. FITS: Defender side doors (rear doors use Series profile frames CHAS51).

CHAS50 $ 54.00

403-7591 roversnorth.com 91 B Series Bulkhead
(800)
20
16 12 22 13 14 8 1 11
10
5 7 6 19 23 18 21 3 15
2 4
17
24
9
RNA0133
Series Bulkhead, Door Repair
CHAS34

RNF0005S

Series LHD Stainless Steel Footwells

RNF0006S

Manufactured in stout 304 stainless steel for a superior corrosion proof footwell. This is an exact replacement assembly manufactured to exacting detail as original. Includes top, bot tom, side sections and middle reinforcement panel. These are the finest floor replacement assemblies available globally and are unmatched for quality and original appearance.

Fits: LHD Series II III 2.25 Petrol and Diesel 1959 1984. Except Military Airportable.

Series II III LHD, RH

Series II III LHD, LH

RNF0006S $ 179.00

RNF0005S $ 179.00

Series II-III Center Bulkhead Replacement Parts

Complete center bulkhead replacement section in stainless steel.

Series II III 2.25 liter Petrol and Diesel models 1959 1984. RNF0010 $ 289.00

Bulkhead Side Panel, RH Center Series II, IIA, III RNF0009 $ 59.90

Bulkhead Side Panel, LH Center Series II, IIA, III RNF0007 $ 54.00

Seatbox Assembly Flat Pack

Assemble your own and save on shipping.

Eight-piece kit that comes with rivets for assembly. Lids and toolboxes sold separately.

Seatbox Assembly Flat Pack Kit, Series IIA III PLC069 $ 669.00

Seatbox Assembly Flat Pack Kit, Defender V8s, 300 Tdi, Td5 RNA0050 $ 739.00

Lid Seat Base Center, Series IIA III PLC092 $ 64.50

Lid Seat Base LH Tool Box, Series IIA III

Series Bulkheads Galvanized, Epoxy Primed Ready for Paint

Twin Battery Tool Box CHAS29A (assembly required)

Series II, IIA & III

Under Seat Tool Box Replacement Kits

Replacement toolbox assembly for the seat box of Series III and earlier models. These are made of 2mm thick aluminum and are machine cut and CNC pressed for accuracy of fitting. Supplied pre-drilled in three separate parts for ease of fitting. This tool box fits on the Left Hand Side. Requires pop rivets; seam sealant recommended for assembly. Add CHAS28TRAY for adding storage for a single battery, or use CHAS29A for twin battery storage, ProLine.

Under Seat Tool Box Replacement Kit CHAS28A $ 169.00

Under Seat Tool Box Replacement Assembly, Galvanized CHAS28 $ 198.95

Under Seat Twin Battery Tool Box Replacement Kit CHAS29A $ 239.00

Series

Series

Replacement Battery Tray Seatbase Tool Box, ProLine CHAS28TRAY $ 58.95 Pop Rivet 3/16” x 7/16”, ProLine

Floor Plates

Series IIA III

RH,

PLC690 $ 0.38

Series IIA, III

Tool Box Center Seat

Drop-in tool box for extra hidden away storage space under the center seat. Can be easily in stalled and removed to access the gearbox. PLB863 $ 79.50

PLB720 $ 69.95

69.95 Defender

RH Front Defender, ProLine

18.70

Kit RNA0164 $ 59.50

92 roversnorth.com The Source for Classic Land Rover Parts
CHAS28TRAY
Series IIA III 4-Cylinder, ProLine
LH, Series IIA III 4-Cylinder, ProLine PLB721 $
...............................................................................PLS300
4-Cylinder Petrol,
NA Diesel
$ 54.95 RH Front Defender,
2.25L
w/LT77 PLS304 $ 72.00 LH Front Defender, Genuine RNS302 $ 170.21 LH Front Defender, ProLine PLS302 $ 54.95
NA
Hardware
PLB863 PLB720
LH Front Defender, 4-Cylinder Petrol, 2.25L
Diesel w/LT77 PLS303 $ 72.00 LH Front LT85 V8, Genuine RNS301 $ 235.38 Stainless Steel Front Footwell Floor Plate Hardware Kit RNA0143 $
R380 Floor Tunnel
Replacement Bulkhead, Floor Parts Series IIA Positive Earth, 1959 1966 LHD PLX907LHD Series II IIA Positive Earth 1959 1966 LHD, ProLine PLX907LHD $ 3195.00 Series II IIA Positive Earth 1959 1966 RHD, ProLine PLX907RHD
$ 3195.00
Negative Earth 1967 1971 LHD, ProLine
Series IIA
PLX908LHD $ 3195.00
Negative Earth 1967 1971 RHD, ProLine
Series IIA
PLX908RHD $ 3195.00
III 1972 1984 LHD, ProLine PLX909LHD $ 3199.00
hot dipped
III 1972 1984 RHD, ProLine PLX909RHD $ 3199.00 ProLine bulkheads are
galvanized steel, epoxy primed. RNA0143 RNA0050 PLC069 RNA0164
RNF0010
RNF0007
..............................................PLC091 $ 64.50 PLS302

4 RNF0016

1

RNF0012

AllpartsaregalvanizedexceptRNF0020,whichispainted.

2

RNF0014 is required when fitting RNF0012

A Defender 1983–2006 Galvanized Floor Panels

Reproductions of exact factory units, these hand crafted 18-gauge steel units are galvanized (except RNF0020) and ready to fit into your Defender for a proper restoration.

1. Floor Panel, LHF Outer, 90/110 NAS, Galvanized.................................RNF0012 $ POA

2. Floor Panel, LHF Inner, 90/110 NAS, Galvanized RNF0014 $ 169.95

3. Floor Panel, LHF Upper, 90/110 NAS, Galvanized RNF0018 $ 97.50 Floor Panel, RHF Inner, 90/110 NAS, Galvanized RNF0015 $ 59.95 Floor Panel, RHF Outer, 90/110 NAS, Galvanized RNF0013 $ 74.90 Floor Panel, RHF Upper, 90/110 NAS, Galvanized RNF0019 $ 97.50

4. Kick Panel, LHF Outer, 90/110 NAS, Galvanized RNF0016 $ 59.00 Kick Panel, RHF Outer, 90/110 NAS, Galvanized RNF0017 $ POA

5. Kick Panel, LHF Inner, 90/110 NAS, Painted steel RNF0020 $ POA Kick Panel, RHF Inner, 90/110 NAS, Galvanized RNF0021 $ 69.95

Replacement Economy Footwell 2-Piece Assembly

2-piece economy footwell assembly for LHD Defenders. Made from a single sheet of 1.5mm thick zintec-coated mild steel. Machine cut and CNC pressed for accuracy. Outside sidewall is supplied as a separate piece for ease of fitting. FITS: Defender Left Hand Drive 1983 2006 all models. NOTE: This is an economical repair panel manufactured from a single sheet of mild steel. The original footwell uses an inner and outer panel welded together.

Defender LHD Stainless Steel Footwells

This is an exact double-panel replacement of the highest quality for owners who require a footwell re placement identical to the original, with superior corrosion resist ance. Precision manufactured from 18-gauge 304 stainless steel. The inner and outer panels are pre-assembled for ease of installation. Outside knee wall is in cluded as a separate part to allow fitment without removing the bulkhead from the vehicle. This is the finest Defender floor assembly available globally, unmatched in quality and original appearance.

Defender LHD (Left Hand Drive) all models 1983

Replacement Footwell RH (Pasenger side), Defender LHD RNF0026S $ 229.00

Replacement Footwell LH (Driver’s side), Defender LHD RNF0025S $ 229.00

RNF0025S

RNF0023

Replacement Footwell Assembly LH for Defender LHD RNF0023 $ 119.00

Replacement Footwell Assembly RH 114.50

Replacement Footwell, LH for Defender RHD 114.00

Replacement Footwell, RH for Defender RHD 114.00

(800) 403-7591 roversnorth.com 93 3
5
RNF0020 RNF0018
A
Defender 1983 2006 Galvanized Floor
Defender 1983-2016
RNF0025S
Panels
RNA0133
$
...............................................PLN022
Defender 300Tdi, 3.5 V8 LHD w/ air vents, ProLine PLN673
2869.00 Defender 300Tdi RHD w/ air vents, ProLine
$ 2869.00 Defender RoW 300Tdi & Td5 1994 2006 LHD, Genuine RNN673 $ 5999.95 Defender RoW 300Tdi & Td5 1994 2006 RHD, Genuine RNN022 $ 7204.55
Defender 1983 1992 w/air vents LHD, ProLine PLX911 $ 3189.00 Defender NAS 1994 1995, Genuine (shown below painted) RNB1995 $ 5990.00 Defender NAS 1997, Genuine RNB1997 $ 5999.00 Bulkhead to Chassis Stainless Steel Hardware RNA0133 $ 25.50 Defender 300Tdi, 3.5 V8 LHD w/ air vents PLN673 ProLine bulkheads are hot dipped galvanized steel, epoxy primed. Genuine bulkheads are Galvanealed steel, electrostatic primed. Defender Bulkheads Galvanized, Epoxy Primed Ready for Paint Fits into the center section of your seatbox above your transmission. FITS: LT77, R380 manual transmissions, ProLine. Center Tool Box RNA0050CTB $ 98.50 Create a hidden compartment below with a cubby box lid Center Lid w/Cubby Box mounting holes Genuine RNS317 $ 76.59 ProLine PLS317 $ 59.00 Toolbox Defender Seat Bulkhead Removal Kit Fits: D90 1983 2002, D110 1983 2002 non-SW. RNA2111 $ 289.95 RNA2111 RNA0050CTB RNS317
Defender 1983 1992 w/air vents RHD, ProLine PLX910 $ 3199.00

he chimney has been cleaned with the greatest of care, in hopes that Santa Claus will soon be there. Not quite what Clement Moore wrote, but the spirit remains the same. Winter is on its way here in New England, and while your temperatures and precipitation might differ, the days get shorter and the nights get longer. That means more time to search out Land Rovers whose use in media attracts eyeballs and clicks.

As always, it’s useful for novice Sighters and veterans to review the rules of the contest:

Rule #1 — All Sightings receive rec ognition and our appreciation, but not necessarily a mug. We reward only those Sightings that capture the unique qualities of Land Rovers as well as their owners, and display them in a distinctive way.

Rule #2 If your Sighting doesn’t really surprise you, it won't surprise us, either — thus, we can’t award you a mug. We're delighted, but not surprised, that Land Rovers appear in British television programmes, British publications, films with British themes and shows about Af rican safaris. These Sightings are appreci ated, but not mug-worthy.

Rule #3 At an ever-changing date be fore publication, we close off the Sightings; for this issue it was October 10, 2022. If we've mentioned the Sighting in an earlier issue, we might not men tion it again. If you're new to the family of Land Rover enthusiasts, you may not have seen your Sighting in an earlier issue.

Rule #4 If you qualify, one mug per Sighting per issue. No more than two Coveted Mugs will be awarded to the same person per year.

Rule #5 Sightings that are Land Rover refer ences in books go to our Literary Land Rover Editor for mention, but only when space permits.

Rule #6 Psst... email submissions — remember we can't send a mug by email. To be considered for a Coveted Mug, send us your real name and shipping address too.

Rule #7 Snail mail sightings must be sent to: Editor, Rovers Magazine, P.O. Box 90, Vinalhaven, ME 04863.

Rule #8 Grudgingly, very grudgingly, the Editor admits he might have made an error. Let us know if you think you've been jobbed, but all decisions of the Editor are final.

SIGHTINGS

To submit a Sighting send an email to sightings@roversnorth.com

Magazine articles are often improved when Land Rovers are a part of their stories. Kyle Madigan, Warner, NH, and Tim Glahn, Midlothian, VA, enjoyed an article featuring the subject’s Land Rover in the Au gust ’22 edition of Country Living Dixon Kenner, Ottawa, ON, couldn’t miss the dog sitting in the passenger seat of a Series IIA in an Atlantic article on canine cognition. David Russ, Lyme, NH, noted that it is very unusual to see photographs in The New Yorker, but the mag azine made an exception with its coverage of the death of Queen Elizabeth. Bill Newport, Windsor, CT, noted an overhead shot of a new Defender 110 in an Audubon Magazine ar ticle. Tyler Moore, Wind ham, NH, read an online article from the Nantucket Inquirer and Mirror about the heroic action of a bystander – with a Series Land Rover – rescuing residents of an old hotel

during a fire. Tyler also enjoyed receiving a birthday card with a Land Rover on the front!

Movie and television producers love to include Land Rovers in their films. Debbie Mason, Lower Sackville, NS, watched Shark, a 1969 movie featuring Burt Reynolds and a few Series I Land Rovers. Jim Hutchinson, Cambridge, MA, spotted a Defender 110 in an episode of The Terminal List

Whether in catalogues or online, retailers and service providers know that the presence of a Land Rover draws atten tion. Steve Lovoy, At lanta, GA, enjoyed seeing a Defender pickup on the cover of the Classic Prep catalogue. Jason Momoa helps pitch rock climbing gear in an online ad for So iLL, seated on the bumper of a RHD Series Land Rover with UK

94 roversmagazine.com Holiday 2022
T
ROVERS MAGAZINE / HOLIDAY 2022

plates, notes Justin Ridgely [See Rule #6].

Dan Prasada-Rao, Great Mills, MD, spotted a Defender that briefly appeared on the Survival Summit Facebook page. Defender 110 made a splash on eBay’s website, noted Thompson Smith, Rovers Magazine’s Creative Director, S. Lake Tahoe, CA. Jesse McCoy, Richmond, VA, spotted the rear of a Defender with a custom, built-in gun drawer in the Sitka catalogue. David Russ, Lyme, NH, enjoyed spotting the British company OSLA’s line of Land Rover T-shirts.

David Ducat, Lebanon, CT, spotted a sliver of a Series’ front bumper in a promotion of Matt Hranek’s A Man and His Car, which appeared in the Signals catalogue. Charles Payne, W. Bloomfield, MI, spotted the Land Rover 90/110 on the cover of the latest Ever Eve catalogue. Not a sales pitch, but Louis Straney, Santa Fe, NM, enjoyed seeing a shared post on the ROVERS club Facebook page that commended a Florida resident with an “English Jeep” that performed rescues dur ing Hurricane Ian. Tyler Moore, Windham, NH, spotted the front edge of a Range Rover’s hood in an online ad for Alexa; he com mended Amazon for its “good taste.” Brian Jones, Raleigh, NC, was surprised to see a

Defender 110 in an online ad by Experian touting its auto insurance rates. Larry Lilly, Sinks Grove, WV, bought Firestone tires for his frame-up rebuild and received a Firestone ad poster with a Defender 110 for his garage. We’ve credited these Sightings in the past, but we want to thank Sighters for shar ing them with us. It’s not a surprise that L.L. Bean has returned to posting a Land Rover Defender on the cover of its catalogue; Stephen Smith, the CEO, is an avid enthusi ast. Dixon Kenner, Ottawa, ON; Warwick Hansel, Salt Lake City, UT and Jim Leach [See Rule #6] loved seeing its return. A Vineyard Vines ad for their King of Prussia, PA, store featured a Series Land Rover, noted Chris Hagman, Glen Mills, PA – also not a surprise as Shepard Murray, the CEO, is a Land Rover enthusiast, too. Brian Jones, Raleigh, NC, and Brendon Mahoney, Fort Bragg, NC, enjoyed seeing a Series IIA reappear on the Huckberry website home page. Kevin Kelly, El Macero, CA, was pleased to catch a Range Rover

Winners:

Larry Lilly

Sinks Grove, WV

Brian Jones Raleigh, NC

Tyler Moore Windham, NH

Charles Payne W. Bloomfield, MI

David Ducat Lebanon, CT

Jesse

Richmond, VA

Scott

Menlo, GA

Dixon

McCoy Copeland Steve Lovoy Atlanta, GA
Holiday 2022 roversmagazine.com 95
Kenner Ottawa, Ontario, Canada Classic tailgate on the Peter Millar Crown website. Charles Payne, W. Bloomfield, MI, applauded the return of a Land Rover on the pages of the latest Orvis catalogue. ///

Series, Defender Sill Panels, Side Frames

1. Sill Panel RH Front Defender, Genuine RNC823 $ 177.06

Sill Panel RH Front Defender, ProLine PLC823 $ 68.50

Sill Panel LH Front Defender, Genuine ...............................................RNC824 $ 177.06

Sill Panel LH Front Defender, ProLine PLC824 $ 68.50

2. Sill Panel RHR Defender 110 Chassis Cab, Genuine RNQ822 $ 22.56

Sill Panel LHR Defender 110 Chassis Cab, Genuine RNQ823 $ 24.83

Sill Panel RH Rear Defender 130 Crew Cab, Genuine RNQ824 $ 398.53

Sill Panel LH Rear Defender 130 Crew Cab, Genuine RNQ825 $ 407.03

Sill Panel RH Rear 110 Pickup, Genuine RNQ826 $ 32.18

Sill Panel LH Rear 110 Pickup, Genuine RNQ827 $ 41.21

Sill Panel RH Rear Defender 110 Regular RNY117 $ 29.95

Sill Panel RH Rear Defender 90, Genuine ..........................................RNE349 $ 87.56

Sill Panel RH Rear Defender 90, ProLine PLE349 $ 24.50

Sill Panel LH Rear Defender 90, Genuine RNE350 $ 87.56

Sill Panel LH Rear Defender 90, ProLine PLE350 $ 24.50

Sill Panel RH Rear Defender 110 SW, Genuine RNH794 $ 152.90

Sill Panel RH Rear Defender 110 SW, ProLine PLH794 $ 49.50

Sill Panel LH Rear, Defender 110 SW, Genuine RNH795 $ 152.90

Sill Panel LH Rear, Defender 110 SW, ProLine PLH795 $ 49.50

3. Bolt M6 x 16mm RNF533 $ 2.75

4. Plain Washer M6 ....................................................................................RNI804 $ 1.42

Plain Washer 6mm I.D., Genuine RNX034 $ 2.79

Plain Washer 6mm I.D., ProLine PLX034 $ 0.39

5. Lock Washer 6mm, Genuine RNF428 $ 1.84

Lock Washer 6mm, ProLine PLF428 $ 0.35

6. Nyloc Nut M6, Genuine RNF731 $ 1.29

Nyloc Nut M6, ProLine PLF731 $ 0.68

7. Washer - 1/4" x 5/8" Diameter RNF216 $ 0.87

8. Spring Washer M6 RNQ065 $ 1.02

9. Bracket Sill Panel Mount Defender 90/110, Genuine RNQ828 $ 24.90

Bracket Sill Panel Mount Defender 90/110, ProLine PLQ828 $ 6.75

10. Flange Bolt M6 x 20mm RND909 $ 1.23

11. Plain Washer M6 RNI267 $ 1.12

12. Sill Channel RHF Door Defender +90 ‘07, Genuine RNQ829 $ 87.26

Sill Channel Galvanized RHF Door Defender, ProLine PLQ829 $ 90.78

Sill Channel RHF Door Defender, ProLine PLQ829A $ 98.95

Sill Channel LHF Door Defender, Genuine RNQ830 $ 92.99

Sill Channel Galvanized LHF Door Defender, ProLine .....................PLQ830 $ 90.78

Sill Channel LHF Door Defender, ProLine PLQ830A $ 98.95

13. Complete Sideframe - RH Side 109 & 110 Station Wagon RNC831 $ 2531.52

Complete Galvanized Sideframe, RH Side 109 & 110 SW PLC831G $ 1279.00

Complete Sideframe, LH Side 109 & 110 Station Wagon RNC832 $ 2531.52

Complete Galvanized Sideframe, LH Side 109 & 110 SW PLC832G $ 1279.00

Complete Sideframe RH B-C Post Defender 110 S.W. 2007+ RNY113 $ 1867.34

Complete Sideframe LH B-C Post Defender 110 S.W. 2007+ RNY114 $ 1867.34

Complete Sideframe RH B-C Post Assm Defender 130 RNY115 $ 1996.34

Complete Sideframe LH B-C Post Assm Defender 130 ..................RNY116 $ 1996.34

14. Sideframe RH Side Sill Rail 109 & 110 Station Wagon PLC831-1 $ 145.00

Sideframe LH Side Sill Rail 109 & 110 Station Wagon PLC832-4 $ 145.00

15. Right Side Dog Leg C Post 109 & 110 Station Wagon PLC831-2 $ 222.00

Left Side Dog Leg C Post 109 &110 Station Wagon PLC832-5 $ 222.00

16. Left or Right Full B Post 109/110 Station Wagon PLC831-3 $ 509.00

17. Flange Nut M8, Genuine RNE157 $ 2.50

Flange Nut M8, ProLine PLE157 $ 0.71 18. Stay Bracket Front Sill Defender, Genuine RNQ834 $ 13.60 Stay Brackets Pair Front Sill Defender, ProLine...............................PLQ834 $ 26.99 19. Bracket Rear Sill Stay Defender 110, Genuine RNQ835 $ 41.39 Bracket Rear Sill Stay Set 110 Heavy Duty Aluminum, ProLine PLQ835S $ 65.50 20. Bracket Rear Sill-Body Series & Defender, Genuine RNQ836 $ 29.19

96 roversnorth.com The Source for Classic Land Rover Parts
Sill
1 2 3 3 3 4 5 6 25 18 25 6 6 5 7 3 3 32 17 36 31 30 29 28 17 36 35 34 33 36 17 7 8 6 8 9 11 10 4 5 6 3 3 3 8 6 7 17 22 20 35 19 21 10 5 23 24 17 12 36 35 34 25 10 7 3 1 2 6 3 7 8 26 27 11 9 8 25 6 5 6 3 4 5 6 18 3 4 5 6 4 5 6 5 6 4 6 7 8
Defender, Sill Panels, Side Frames A
Panels, Side Frames 4-Door 2-Door
A Series, Defender Sill Panels, Side Frames
..............................................................................................RNS338
$
Foam Seal Floor to Sill Defender, ProLine
$
26. Panel Extension LH 130 Wheelbase RNQ839 $
Panel Extension RH 130 Wheelbase
$
27. Bracket Sill Extension 130 Wheelbase
$
28. Bracket LH T Post Rear Defender 110 SW, Genuine
$
T Post Rear 109/110 SW,
$
Bracket RH Post Rear 109/110 SW, ProLine
$
29. Bolt M8 x 25mm
$
30. Plain Washer
$
31. Pin-Split RNQ845 $ 0.83 32. Bolt - M8 x 16mm RNE092 $ 3.11 33. Plain Washer 8mm I.D. RNF548 $ 0.94 34. Stud Plate Sill Channel To Bulkhead Defender M8 Studs RNQ833 $ 11.58 35. Washer RNQ097 $
36. Lock Washer 5/16", Genuine ................................................................RNS037 $
Lock Washer 5/16", ProLine PLS037 $
37. Hardware Bolt Kit Side Sill Rail Series 109, Defender 110 SW PLC831H $
S. Front Door Threshold Kit w/o Seat Belt Anchor
$
S. Front Door Threshold Kit w/Seat Belt
Steel Door
Kit 4-Door
Defender
Bolt Kit For LWB Middle Floor Series, Stainless Steel
13 14 16 15 37
Bracket Rear Sill-Body Series & Defender, ProLine PLQ836 $ 16.50 21. Flange Bolt M8 x 20mm, Genuine RND942 $ 2.69 Flange Bolt M8 x 20mm, ProLine PLD942 $ 0.99 22. Spring Washer M8 RNF429 $ 0.75 23. Plain Washer 6.4 x 22.2 x 1.6 RNQ837 $ 0.91 24. Grip Nut M6
$ 2.41 25. Foam Seal Floor To Sill Defender, Genuine RNQ838
16.51
PLQ838
12.99
206.57
RNQ840
210.98
RNQ841
272.84
RNQ843
70.04 Bracket LH
ProLine PLQ843 $ 25.50 Bracket RH T Post Rear Defender 110 SW, Genuine RNQ844
44.48
PLQ844
25.50
RNN684
3.35
RNF433
4.11
1.64
1.53
0.17
21.95 Stainless
RNA0075
89.00 Stainless
Anchor RNA0076 $ 89.00 Stainless
Threshold
Series,
RNA0077 $ 144.00
RNA0064 $ 16.50

Waxoyl

Looking to protect your pride and joy, but aren't near a Waxoyl application center? Waxoyl DIY kits contain everything you need to get the job done. All you need is a way to get under the vehicle (ramps or jack stands for low vehicles), a few hours of your time, and a desire to save your vehicle from corrosion. Aerosol kits do not require special tools. Compressor kits require a home/shop air compressor.

Aerosol

Compressor

Waxoyl USA • www.waxoyl-usa.com (802) 662-8062 Protect Your Land Rover with NEW DIY Kits SWISS TECHNOLOGY
RNW-DIY-4 RNW-DIY-1
DIY Kits
Kits
LR2 Size RNW-DIY-1 $ 120.26 Range Rover, New Defender (L663) RNW-DIY-2 $ 153.93 Series 88”, Defender 90, RR Classic RNW-DIY-3 $ 205.64 Defender 110, 130 (L316) RNW-DIY-4 $ 274.19
Kits
$
by
Rover
Small to Mid-sized unibody RNWCK-1
246.15 Mid-sized to Large SUVs RNWCK-2 $ 302.00 Large to Full Pick-ups RNWCK-3 $ 358.19 Serious DIY Shop Kit WPIAP $ 613.90 RNWCK-1 Endorsed
Land
PRSRT Std US Postage Paid Permit 19 Burl., VT 05401 ROVERS NORTH INC. 1319 VT Route 128, Westford, Vermont 05494 USA Phone 1 802 879-0032 www.roversnorth.com Fax 1 802 879-9152 Family owned by enthusiasts since 1979. © 2022 Rovers North, Inc 1319 VT Route 128 Westford, Vermont 05494-9601, USA Sales and Tech Support: 802 879-0032 roversnorth.com Happy Holidays from all of us at Rovers North Holiday 2022 roversmagazine.com Connect with Us @roversmag

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.