Ode to Oak

Year : 2019

Status: Complete

Rebel Base Collective

The curved roof of the northern patio of CCJ Auckland park meets the desire to create a light and voluminous space that is also intimate.

The purpose of this project was to create a sophisticated building that addresses all the club’s practical needs as well as the challenges posed by the existing architectural heritage, both structurally and socially.

The undulating roof hovers above the existing art-deco railing which needed to be retained. The rounded perforated-ceiling surface absorbs and disperses sound enabling optimal acoustic performance.

The clear story windows shed light on the open space while creating framed views to the sky and into the canopy of the grand old oak tree, which is further celebrated through a semi-circular cut out in the easternmost vault. The soft tapered profile of the vaults allows the building’s roofline to merge into the sky and carries the eye out to the northern forest.

Duties :

1. Measuring existing architectural components and modelling them in Revit

2. Assisting in compiling documentation for submission to the Heritage council.

3. Revit modelling of the outdoor bar area, kitchen and pizza oven.

4. Preparing drawings for council submissions and construction.

SANS 10400-AZ4 COMPLIANCE WITH NBR

WALLS [SANS 10400-K:2011] The wall designs comply with:

General

Masonry walls

Free-standing walls

Control joints

Articulation joints

Bed joint reinf. lintels and/or

4.2.9.3 PPC lintels per SANS 1504

4.2.11 Roof fixing [Type B anchors]

4.5.1 Water penetration

4.5.3 Rain penetration

4.5.3 Rising damp

4.6 Behaviour in fire ANNEX A K 1-5 Deemed-to-satisfy ANNEX B Design of lintels

ROOFS [SANS 10400-L:2011] The roof designs comply with:

4.2 Coverings

4.2.1 General

4.2.2 Roof coverings-pitched roofs

4.2.2.3

Notes

level of 460mm under GL Waste pipes from UPVC to be 50mm.

Soil & open ventilation pipes from UPVC to be 110mm

2 WVV to be 110mm.

Resealable traps to all fittings to be fully accessible.

Any sanitary fixture connected to a soil/waste pipe exceeding 3 meters must have an antisiphon trap (avt).

Traps for all showers (bt).

Soil pipes exceeding 6 meters in length to be vented.

Gradient of drains to be min. 1:60 and max. 1:40.

All drain pipes concealed in ducts, must have external entrance/holes for re's, covered with removable fibre cement panels, or as ndicated on plan. Geyser installation to comply with SANS 0254.

Area Schedule

75" TV installed to bulkhead

Notes

FLOOR NOTE CHARCOAL PIGMENT CONCRETE: Cast insite 100mm cast insitu concrete surface bed (MIN 35MPa) with a mix ratio of 5:1 cement to black oxide powder with 10-13mm aggregate mix with Ref. 193 steel reinforcing mesh. Floor to be polished to 120 grit diamond disk finish with 3 coats of tool-co lithium floor sealer

374 885 plaster and paint painted white with planter box drainage holes with Coprox internal lining imprinted wall BA3419 FOOTRAI Brass bracket at 1000mm c/c with 50mm brass foot rail at 150mm above FFL FFL 0 Powdercoated mild steel carcas with stainless steel shelves with burmog mahogany doors on soft closers with Cabinet Handle Modern Bar in Satin Brass 96mm Beer Kegs and Taps installed to specialist's specifications with 750mm x 750mm x 700mm large blast chiller for SAB and small 450mm x 450mm x 700mm small blast chiller for Windhoek u/c 100mm min cavity with kickplate to allow for services as per kitchen specialist spec. steel shelves for glasses with 50mm vertical mild steel legs powder coated in charcoal. 15mm cold water. Connect to flash cooler at 150mm AFFL. Provide stopcock at 800mm AFFL. Provide flexible pressure hose. Water pressure: 2-4 bar. 700 x 700 x 750mm flash cooler and 450 x 450 x 750mm flash cooler as per specialist installation and specification. S/steel speed rails to be specified by kitchen specialist with ice wells with adequate drainage as per kitchen specialist spec Undercounter space for kegs. 50mm vertical mild steel legs powder coated in charcoal. 255 18 210 18 210 18 156 75 805 80 Powdercoated mild steel carcas with stainless steel shelves with burmog mahogany doors on soft closers with Cabinet Handle Modern Bar in Satin Brass 96mm 15mm cold water. Connect to flash cooler at 150mm AFFL. Provide stopcock at 800mm AFFL. Provide flexible pressure hose. Water pressure: 2-4 bar. 155 NOTE: Louvred doors not visible in this view for ease of visibilty for water supply to flash coolers 1115 85 1200 Drawn by: Date: Project: