SABMag 65 - Fall 219 - sample

ISSUE NUMBER 65 | FALL 2019 | PM40024961 | $6

The PASSIVE HOUSE issue

LIVING LIBATIONS HEADQUARTERS Passive House in the realms of human wellbeing and ecological responsibility

DESIGNING FOR ACCESSIBILITY The Rick Hansen Foundation

VIEWPOINT Making building performance a selling point, and moving on from the glass tower

SABMag - FALL 2019

1

ROAD MAP TO NET ZERO READY 2030.

Owens Corning’s Sustainable Building Enclosures For a Better Tomorrow.

TotalSHIELD™ Commercial Enclosures.

CAVITY EcoTouch® PINK® FIBERGLAS® Insulation

SelectSound® Black Acoustic Blanket or Board

ROOFING FOAMULAR® 350 Roof Insulation

INTERIOR WALLS THERMAFIBER® SAFB™ Mineral Wool Insulation or EcoTouch® QUIETZONE® PINK® FIBERGLAS® Acoustic Insulation

EXTERIOR WALLS THERMAFIBER® RainBarrier™ 45

QUIETZONE® Acoustic Floor Mat

The colour PINK is a registered trademark of Owens Corning.

The colour GOLD is a trademark owned by or licensed to Georgia-Pacific Gypsum LLC and used with permission.

JointSealR™ Joint Seal Tape

FOAMULAR® CodeBord®/C-200 Extruded Polystyrene Rigid Insulation

PERIMETER FOUNDATION WALLS FOAMULAR® C-300 Extruded Polystyrene Rigid Insulation

UNDER SLAB FOAMULAR® 400/600/1000 High Density Extruded Polystyrene Rigid Insulation

Using Owens Corning EcoTouch® PINK® FIBERGLAS® Insulation, FOAMULAR® Rigid Foam Insulation and Thermafiber® Mineral Wool Insulation helps provide a durable, energy efficient building enclosure. Look to Owens Corning products for energy efficient, acoustically sound and cost efficient solutions in institutional, commercial and industrial buildings.

CANADA & QUEBEC Salvatore Ciarlo, P.Eng Architectural Solutions and Technical Services Manager, Canada 1.800.504.8294 salvatore.ciarlo@owenscorning.com

ONTARIO Tyler Simpson, B.Tech.

Technical Sales Manager, Ontario 1.800.933.9892 tyler.simpson@owenscorning.com

WESTERN CANADA Luis Faria, B.Eng, PMP, CMgr MCMI Technical Sales Manager, Western Canada 1.833.258.5299 luis.faria@owenscorning.com

To learn more contact our Owens Corning Building Science Experts at www.specowenscorning.ca/contacttech GREENGUARD Certified products are certified to GREENGUARD standards for low chemical emissions into indoor air during product usage. For more information, visit ul.com/gg.

UL Environment claim validations lend third-party credibility to single-attribute environmental claims. *73% recycled content is based on the average recycled glass content in all Owens Corning fiberglass batts, rolls and unbonded loosefill insulation manufactured in Canada.

THE PINK PANTHER™ & ©1964-2019 Metro-Goldwyn-Mayer Studios Inc. All Rights Reserved.

The colour PINK is a registered trademark of Owens Corning. © 2019 Owens Corning.

2

SABMag - FALL 2019

D CONTENT RE CYCLE

AVERAGE 73% RECYCLED CONTEN T 61% POST-CONSUM ER 12% PRE-CONSUMER

73 | PINK® FIBERGLAS® Insulation

20 | FOAMULAR® XPS Insulation

AWARD WINNER

WWW.SABMAGAZINE.COM

INTERNATIONAL EXCELLENCE IN BUSINESS-TO-BUSINESS PUBLISHING

For more about the articles in this issue!

This issue published in association with:

Industry News, Products, Events 10 Living Libations Headquarters

6

Passive House in the realm of human wellbeing 16

Valleyview Town Hall New municipal building aims for Passive House Plus

23

CONTINUING EDUCATION The Ken Soble Tower

10

A Passive House transformation 27

FALL 2019

Fire safety in tall wood buildings

By Jim Taggart

36

Designing for Accessibility

16

The Rick Hansen Foundation 40

Charter Telecom Headquarters Passive House a superior environment for employees

48

VIEWPOINT Moving on from the glass tower

54

Passive House on an upward curve Interview with Rob Bernhardt, Passive House Canada 32

ISSUE DON’T MISS NEXT WINTER 2020

ÚThe Rotunda

LEED Platinum-targeted mixed-use building inserts contemporary architecture into historic urban fabric

ÚMcEwen Graduate Study and Research Building Schulich School of Business, York University Climate responsive solar chimney only one part of a hybrid active/passive bioclimatic system

ÚAnnual Special Supplement: 2020 Directory of Products and Services for Sustainable Building Cover: The Passive House-certified Living Libations Headquarters.

Photo: John Lehmann Photography.

SABMag - FALL 2019

3

YORK UNIVERSITY SCHULICH SCHOOL, TORONTO One of the most environmentally sustainable and socially responsible academic buildings in North America.

Architect: Baird Samson Neuert Architects. Contractor: Ellis Don.

INLINE FIBERGLASS LTD. provided the bird-friendly, triple-glazed high-performance windows that contributed to achieve 71% energy savings and 67% in greenhouse gas emissions compared to Canadian Model National Energy Code reference building. The building is one of the first to use principles of Thermally Active Building Systems (TABS) to achieve LEED Gold certification.

GRE E N B NG LD I UI

AN

C A NA D I

AWARDS

2019

SPONSOR

CALL US TO DISCUSS YOUR NEXT PROJECT! lbidner@inlinefiberglass.com 4

SABMag - FALL 2019

1.866.566.5656, ext. 226

MEMBER/MEMBRE

Dedicated to high-performance building Member Canada Green Building Council

SABMag is a proud member and official media partner of the Canada Green Building Council.

THERE IS NO

PLANET ‘B’ This was perhaps the starkest message to be seen on the many signs carried by teenagers in the Climate Strike rally I took part in last month. Rather than teach my Sustainable Design class in a Downtown lecture theatre, I offered my students the opportunity of a very different field trip.

VISIT www.sabmagazine.com PUBLISHER Don Griffith 613-421-7588, dgriffith@sabmagazine.com EDITOR Jim Taggart, FRAIC 604-874-0195, architext@telus.net SENIOR ACCOUNT MANAGER Patricia Abbas 416-438-7609, pabbas@sabmagazine.com GRAPHIC DESIGN Carine De Pauw cdepauw@sabmagazine.com SUBSCRIPTIONS/CHANGE OF ADDRESS Lyse Cadieux, lcadieux@sabmagazine.com

Published by

www.janam.net 81 Leduc St.,Gatineau, Qc J8X 3A7

SUBSCRIPTION PRICES FOR PRINT [TAXES EXTRA]

1 year [4 issues] 2 years [8 issues] 3 years [12 issues]

CANADA $28.95 $50.95 $74.95

USA $39.95 $69.95 $104.95

ORDER PRINT OR DIGITAL: https://sabmagazine.com/subscribe/

ISSN 1911-4230 Copyright by Janam Publications Inc. All rights reserved. Contents may not be reprinted or reproduced without written permission.

Views expressed are those of the authors exclusively.

Publication Mail Agreement #40024961 Return undelivered Canadian address mail to: Janam Publications Inc., 81 Leduc St., Gatineau, Qc J8X 3A7

Printed on Domtar Husky Opaque text offset paper.

Amid a crowd of 100,000, a few were clearly focused on the Instagram moments rather than the climate crisis – but mostly it was otherwise. The informed and passionate speeches made by young people not yet old enough to vote, was compelling. Although none of my students spoke to the crowd, the ‘reflections’ they submitted to me afterwards were blunt and to the point. One of them observed; photo: Roy Grogan

“The choice between ‘in action’ and ‘inaction’ is all that it takes for a phenomenon to occur. People care – this isn’t just some phase or rebellious little event; this is people who are tired of not knowing whether their children will live to see a brighter future. This is about youth who are tired of being undermined and written off as less intelligent members of society. How is it that we’re smart enough to be taught Calculus, the laws of physics, be leaders in our school communities, yet not be smart enough to understand the state of the world, what is good and bad and the glaring facts that science has proven again and again about the troubles we are facing.”

The solution could be conjured from a minestrone of small initiatives, as Paul Hawken argued in ‘In Drawdown’ – but where are the politicians actively implementing his recipe? As the young people at the Climate Strike clearly understood, they are being kept out of the kitchen. Hence the challenge, “Let’s do it now!”

What does this mean for architects? With zero carbon and net positive buildings a reality, ‘inaction’ now means being satisfied with something less. Our mission is to close the gap between what is achievable and what we actually achieve. Yes, we owe this to our children, but we also owe it to ourselves.

Jim Taggart, FRAIC Editor

SABMag - FALL 2019

5

NEWS RAIC REPORT CANADIAN ARCHITECTS DECLARE PLEDGE CALLS FOR ACTION ON CLIMATE

The call to action includes:

The Royal Architectural Institute of Canada’s (RAIC) Committee on

• Design for holistic reductions in greenhouse gas emis-

Regenerative Environments is calling on Canadian architectural and

sions. Advocate for investments in a rapid transition to

design firms to commit to combatting the climate crisis by signing a

resilient climate-positive alternatives. Eliminate waste and

new Canadian Architects Declare pledge.

harm and support a quick transition to circular economies.

• Design for holistic health, resilience, and regeneration;

The declaration, titled ‘Canadian Architectural Professionals Declare

respecting the rights and wisdom of Indigenous Peoples.

Climate and Biodiversity Emergency and Commit to Urgent and

• Adopt regenerative design principles and practices to

Sustained Action’, is a grassroots effort developed by architects across

design and develop projects and environments that go

the country and members of the RAIC Committee on Regenerative

beyond the standard of net zero in use.

Environments. It is based on the UK’s ‘Architects Declare’ initiative.

• Advocate for the rapid systemic changes required to address the climate and ecological health crises, as well as

“The design, construction, and operation of our built environment

the policies, funding priorities, and implementation frame-

accounts for nearly 40% of energy-related carbon dioxide emissions,

works that support them.

and pervasively impacts our societies and the health of the living systems that sustain us,” says the Canadian statement.

A companion document, ‘Designing for the Future’ (https:// raic.org/raic/designing-future) expands upon actions that

The declaration urges architects and designers to raise awareness of the

architects and designers can take.

impact of the built environment on climate change and take immediate action through their projects and roles as advisors, advocates, educators, and enablers.

LATEST SABMAG CASE STUDY: RJC ENGINEERS ON ENERGY MODELLING The latest SABMag one-page digital case ENERGY MODELLING determines conservation measures

at schematic design stage Buildings account for approximately 30% of total Greenhouse Gas (GHG) Emissions in Canada. As a result, Canada has pledged to reduce carbon emissions 30% below 2005 levels by 2030 under the Paris Climate Action Plan.

As such, different provinces across the country are adopting more contemporary energy codes and standards to advance the energy performance of buildings towards the ambitious 2030 energy efficiency goals. For example, the Province of British Columbia and City of Toronto have adopted new stringent energy standards: the BC Energy Step Code and the Toronto Green Standard V3, respectively. These new standards have a passive house philosophy with the goal of “net-zero ready” buildings by 2030.

Energy modelling and commissioning are now of crucial importance considering a building as an integrated system of structural, building enclosure, mechanical, and electrical elements. As advocates for sustainable design, RJC has conducted energy studies for existing buildings, whole building energy modelling for new constructions, and whole building air-tightness testing for a wide range of projects across Canada. RJC Engineers has helped clients to meet their energy and GHG targets for a variety of projects from commercial/institutional buildings to multi-unit residential towers for both new construction and existing buildings.

As a case study, RJC Engineers was retained as structural, building envelope, and energy consultants for a new 15-storey high-rise concrete tower in Victoria. The project must demonstrate 15% energy and GHG emissions reduction over NECB 2015 baseline building. The energy modelling was performed at the Schematic Design stage to determine the energy conservation measures (ECMs) that must be implemented to synergize the thermal characteristics of the structural, enclosure, mechanical and electrical systems of the building.

The images are examples of the graphical output from modelling software (IES VE - https://www. iesve.com/), and convey the relationship of buildings to surrounding structures while taking into account solar effects on the building form and façade.

The developed ECMs include utilization of high-performance building enclosure assemblies (overall R-10+ effective), high-performance glazing systems with multiple low-e and hard coatings (as opposed to tripleglazing), energy recovery ventilators to supply fresh air, balcony slab to envelope area reduction, and highly efficient electrical systems.

In addition, a comprehensive thermal comfort study was carried out, and several passive cooling strategies were determined to meet the thermal comfort criteria of the BC Energy Step Code.

study, ‘Energy Modelling determines conser-

DARTMOUTH WAREHOUSE FIRST INDUSTRIAL BUILDING IN THE COUNTRY TO BE CERTIFIED UNDER CAGBC’S ZCB STANDARD

vation measures at schematic design stage’,

East

by national engineering firm, RJC Engineers,

announced that 355 Wilkinson

Port

describes how energy modelling is of such

–

crucial importance at the schematic design

Warehouses in Dartmouth, NS –

stage to determine the energy conservation

has achieved the Canada Green

measures (ECMs) that must be implemented

Building Council’s Zero Carbon

to synergize the thermal characteristics of the

Building – Design certification.

part

of

Properties the

has

Wilkinson

structural, enclosure, mechanical and electri-

A part of the initial Zero Carbon

cal systems of the building. The developed

Pilot Program, 355 Wilkinson is the first industrial building in the

ECMs can touch on more than just the enve-

country to be certified under the ZCB Standard—and has the

lope but also HVAC and electrical systems, both passive and active. See

potential for tenants to achieve $0 on their heating bill. Given the

it at: https://sabmagazine.com/case-studies.

industrial asset class represents over two billion square feet of real

www.rjc.ca

estate across 11 Canadian markets, there is a remarkable potential for carbon savings to be had if more property owners follow East

PASSIVE HOUSE IN LANGLEY A DEMO FOR OTHERS

Port’s lead.

Over one quarter of Passive House projects in North American are located in BC, partly motivated by the desire to achieve the higher steps of the BC Energy Step Code. For a new single-family home in Langley, Innotech Windows + Doors introduced the Defender 88PH System, a Passive House Institute (PHI) certified window system.

The homeowners prioritized functionality, comfort and sustainability in the charming 5,000 sq.ft. farmhouse which will house two families. The house uses Innotech PHI-certified windows with true triple glazing and Terrace Swing Doors with Guardian Vacuum IG glass, and has a R-76 net average roof assembly with blown cellulose and graphite-infused EPS. (Continues on page 8.)

6

SABMag - FALL 2019

ADS IN THIS ISSUE 2 4 7

9 15 19 21 22

Owens Corning Inline Fiberglass Schock Isokorb Structural Thermal Breaks Dekrail / Steenhof / Element5 EnerSign Windows and Doors Tech-Crete Sound Solutions Tempeff North America

35

39 45 48 53 55 56

Mitsubishi Heating and Cooling / Quadlock / Richelieu / Innotech Sustainable Forestry Initiative Euroline Windows and Doors Enbridge Gas CPCI Owens Corning Engineered Assemblies

Schöck Isokorb® Structural Thermal Breaks.

Prevent condensation and mould, cut heat loss. ▶ Prevent condensation and mould ▶ Reduce heat loss by up to 90% ▶ Improve the effective R-value of your building envelope by up to 50% ▶ Increase warmth of interior floors by up to 19°C/34°F ▶ Most effective way to meet code requirements for continuous insulation

Uninsulated balconies, canopies, slab edges and parapets penetrating building envelopes create thermal bridging between the cold exterior and the warm interior structure that supports them, causing heat loss, condensation and mould.

Isokorb® Structural Thermal Breaks prevent thermal bridging by insulating the building envelope at the penetration, while supporting loads equivalent to conventional concrete and/or steel structures, offering multiple benefits.

Isokorb® Structural Thermal Breaks for concrete construction (above) contain engineered stainless steel rebar for casting into interior and exterior sides of the penetration.

Isokorb® Structural Thermal Breaks for steel construction (left) bolt interior steel structures to cantilevered balcony supports, canopies or rooftop connections.

HH-0951

Schöck North America | +1 855 572 4625 | info@schock-na.com | www.schock-na.com SABMag - FALL 2019

7

NEWS Langley Passive House The house was the subject of the August Passive House Canada monthly educational event for green building enthusiasts in and around Vancouver. The event included a selfguided tour of the house and a presentation of its construction techniques and building materials, including a full-size mock-up of the

“For a private company to make

wall assembly.

the investment in zero carbon design shows incredible ambition and foresight. The key to com-

REPORT SHARES INSIDE STORY OF BC’S TRAILBLAZING ENERGY STEP CODE

pleting a project of this complex-

‘Lessons

ity is to work as an integrated

From the BC Energy Step Code’,

team. This specialised approach

The

recent

report,

explains how BC created a first-

and commitment from our client

in-North America building code

will result in a one-of-a-kind net zero facility that changes the stan-

designed to improve energy effi-

dard for this global company,” says Drew Hauser, Director at mcCal-

ciency and transform the market

lumSather.

towards the ultimate goal of netzero energy-ready performance.

NEW BOOK AN INDISPENSABLE GUIDE ON SOLAR ELECTRICITY BC-based New Society Publishers will soon

The Step Code is a section of the BC Building Code that local gov-

release the new book, Solar Electricity

ernments may use, if they wish, to require or incentivize builders to

Basics, 2nd ed: Powering Your Home or

deliver a higher level of energy efficiency performance in new con-

Office with Solar Energy by Dan Chiras,

struction projects.

Ph.D. a noted author of numerous books on renewable energy. The book offers a

The publication details the collaborative process that yielded the Step

concise and up-to-date guide covering all

Code in the hope that other jurisdictions will develop a similar code,

the essentials, such as:

and the 10 key lessons learned.

• How to size, cost, and choose the right system,

1. Pitch a Big Tent, and Embrace Shared Leadership

• Where to mount a system for best per-

2. Set Your End Game, then Backcast

formance,

3. Fear Not Your Local Governments

• Type of modules and inverters,

4. Provide Simple, Clear, and Accessible Materials

• How to install and maintain batteries,

5. Encourage Collective Ownership

• Cost vs benefit for solar electric systems, and

6. Identify and Tackle Cost ‘Pain Points’

• How to connect to the grid.

7. Offer an Easy On-Ramp to Performance Codes 8. Consider Elections and Seasonal Factors in your Roll-Out Plan 9. This is a Change-Management Process

Publisher: New Society Publishers (https://www.newsociety.com)

10. Continue to Refine and Improve the Standard Over Time ‘Lessons From the BC Energy Step Code’ is available via the Province of British Columbia’s dedicated BC Energy Step Code site at: energystepcode.ca, under Resources/Publications.

ENDRESS+HAUSER CANADA: THREE IN ONE CERTIFICATION A FIRST FOR A PRIVATE COMPANY IN CANADA Designed er,

the

by

new

mcCallumSath-

two-storey,

47,000

square-foot Customer Experience Centre in Burlington, Ontario for Endress+Hauser Canada will target net zero energy, the Zero Carbon Building Standard and LEED Gold through the Canada Green Building Council (CaGBC). This will make Endress+Hauser, a global leader in process measurement and instrumentation, the first private company in Canada to pursue all three certifications at once. Completion is planned for the fall of 2020.

8

SABMag - FALL 2019

$19.95, taxes and shipping extra. Paperback (6”x9”), 240 pages.

ISBN: 9780865719255

THE RAIC AND CANADA COUNCIL FOR THE ARTS LAUNCH 2020 GOVERNOR GENERAL’S MEDALS IN ARCHITECTURE The Royal Architectural Institute of Canada (RAIC) and the Canada Council for the Arts invite architects to participate in the competition for the 2020 Governor General’s Medals in Architecture, one of the country’s most prestigious and coveted architectural awards.

Awarded every two years, the 12 medals recognize and celebrate outstanding design in recently completed built projects by Canadian architects. Submission deadline: December 6, 2019 at 12:00 a.m.

ET. Apply at https://raic.org. The call for submissions is open to all architects or team of architects who were the lead design architects.

They must be Canadian citizens or permanent residents of Canada, and licensed or registered with a Canadian provincial or territorial jurisdiction. Eligible projects are those that were built in and outside of Canada and completed between January 1, 2012, and September 1, 2019. mcook@raic.org

Fully independent anchoring Exclusive hidden fasterners Integrated led lighting option Industry unique designs

Toll Free: 1-800-335-7245

www.dekrail.ca

Proud railing supplier of LLHQ Libations Building, Haliburton, ON

1/4dekrail.indd 1

2019-10-07 9:50 AM

Rapid assembly of prefabricated panels

Innovative Element5 Boxx Panels in situ

DESIGN

COST CONSULTING

ENGINEERING

EMPOWERING ARCHITECTS, ENGINEERS AND OWNERS WITH SUSTAINABLE MASS TIMBER SOLUTIONS element5halfpage.indd 2

FABRICATION

ASSEMBLY

VISIT US AT ELEMENTFIVE.CO

Contact us for more information or help with your next mass timber project: 1-888-670-7713

2019-10-02 12:51 PM

SABMag - FALL 2019

9

LIVING LIBATIONS headquarters Passive House in the realms of human wellbeing and ecological responsibility

1

2

By Jim Taggart Set on a south-facing slope amid the forested hills of Haliburton, Ontario, the design

A manufacturer of organic beauty care products, Living Libations has a staff of 50 who, on completion of this project, now work in a production laboratory building with an exposed heavy timber structure and natural finishes that cre-

of the new Living Libations Headquarters

ate a warm and welcoming atmosphere. The interior hardwood plywood finish is

reflects a corporate philosophy that places

bonded with a food-grade soy-based adhesive, rather than urea formaldehyde

the highest value on nature, beauty and

(UF), which does not emit toxic air contaminants.

being. In building terms, this philosophy

The other program spaces include (on the uppermost floor), a professional

naturally led to the choice of a highly dura-

kitchen, a south-facing dining room that opens onto a 450m2 outdoor terrace, a

ble, low-energy form of construction, with

yoga room with adjoining meditation, and a light therapy solarium which opens

a strong emphasis on indoor environmental

onto a large rooftop terrace that has a panoramic view of the surrounding forest and beautiful sunsets.

quality and attractive common spaces that would have the minimum environmental impact over an extended life cycle. These

The design approach was to let the geography of the site shape and locate all built form in order to minimize the ecological impact on the site. Compasses and a solar pathfinder were used to ensure the building was oriented for maximum

criteria led in turn to the choice of a

cold season solar heat gains. The steep south-facing slope made it possible to

Passive House structure.

capture solar heat by locating the majority of windows on the south side while the concrete construction of the ground floor, earth-sheltered by the slope, created a thermal flywheel to modulate diurnal temperature fluctuations.

10

SABMag - FALL 2019

SABMag - FALL 2019

15

VALLEYVIEW

town hall

New municipal building aims for Passive House Plus

By Oscar Flechas The new Valleyview Town Hall is an 800 m2 two-storey plus basement building located in Valleyview, 350Km north of Edmonton in the heart of Alberta’s oil country. Despite the large seasonal fluctuations in temperature and sunlight levels at this latitude, Valleyview Town Hall is aiming to be the first Passive House certified commercial building in Alberta and the first Passive House Plus in North America. This means that on-site renewables meet 100% of the building’s energy demand on an annual basis, a giant leap forward for a town with fewer than 2,000 residents.

1

The building reuses the footprint of a previous structure, minimizing site distur-

To further enhance indoor environmental quality,

bance, preserving adjacent community park space and capitalizing on solar orien-

all interior finishes, paints, adhesives, flooring and

tation. With the latter being a vital strategy in this extreme climate, the program is

composite wood products are specified to con-

organized with high-traffic working areas towards the long, naturally-lit south side

tain low amounts of volatile organic compounds

to ensure energy balancing. In the warmer months, heat gains are controlled with

(VOCs) and be free of other toxins. Beyond the

fixed shades that cut out the high angle sun.

physiological health of its employees, however, the municipality is also concerned for their psy-

In addition to its aggressive energy targets, the Passive House Standard requires

chological wellbeing. Accordingly, all workspaces

excellent indoor air quality through carefully calibrated mechanical ventilation and

and other frequently used areas are adjacent to

air recirculation systems. To maintain steady temperatures over all three levels of

operable windows that connect visually to the

the building, ventilation specifications included a mix of outdoor variable refrig-

park, while a balcony and designated outdoor sit-

erant flow (VRF) system for cooling and heating, and a high-efficiency energy

ting area ensure that the connection with nature

recovery ventilator.

is not only visual but also physical.

A

Main floor

N

1 Vestibule 2 Lobby 3 Reception 4 Open workstations 5 Office 6 Meeting room 7 Male wc 8 Universal wc 9 Copy room 10 Filling 11 Servic room

11

6

7

8

9

D

D 6

2

3

4

1

A

16

10

SABMag - FALL 2019

5

5

®

PROTECT YOUR INVESTMENT WITH TECH-CRETE’S ROOF AND WALL PANELS.

For over 30 years Tech-Crete Processors has been developing and manufacturing insulated roof and wall panels.

With over 25 million square feet installed across Canada, and many of our earliest projects still in service, Our panels are performance proven with a history of efficiency and durability in real world environments.

British Columbia and Yukon Enzo Saponaro Technical Sales Representative DIV7 Building Systems Ltd. 604.644.5934 Enzo@div7.ca

Alberta, Saskatchewan, Manitoba, NWT Larry Shoesmith Technical Sales Representative Pilot Group Inc. 403.560.2107 Larry@pilotgroup.ca SABMag - FALL 2019

To Contact the Manufacturer, Please Email info@tech-crete.com

19

NBK TERRACOTTA CLADDING; MAANJIWE NENDAMOWINAN BUILDING, UNIVERSITY OF TORONTO MISSISSAUGA; ARCHITECT: PERKINS + WILL; IMAGE: LISA LOGAN

SOUND SOLUTIONS INNOVATIVE ARCHITECTURAL PRODUCTS 389 DEERHURST DRIVE BRAMPTON, ONTARIO TEL: 1.800.667.2776 OR 416.740.0303

WWW.SOUNDSOLUTIONS.CA SABMag - FALL 2019

21

STATE OF THE ART VENTILATION FOR EVERY COMMUNITY

Leading Builders and Engineers Team Up with Tempeff in Support of Affordable Housing Needs.

Tempeff is empowering builders and engineers with the latest in ventilation equipment that produces the most in sustainability, savings, and most of all—healthy green building environment solutions. Tempeff North America’s Dual Core regenerative technology that offers up to 90% sensible efficiency without any requirement for an energy robbing defrost strategy. Other available technologies offer much lower efficiency due to frosting in colder weather. The Dual Core design is significantly more energy efficient in all conditions, so the payback periods are attractive.

C 22

SABMag - FALL 2019

Find out how you can get the energy recovery to suit your needs at tempeffnorthamerica.com

Turning Up the Heat on Energy Recovery

Read this article and take the quiz at: https://sabmagazine.com/education SABMag continuing education courses for LEED AP credential maintenance

Quiz prepared by Erika Mayer, 475 High Performance Building Supply FOURSEVENFIVE.CA

THE KEN SOBLE TOWER

TRANSFORMATION Built in 1967, the Ken Soble Tower is the oldest high-rise multi-residential building in CityHousing Hamilton’s portfolio. A local landmark with significant community value, the tower had fallen into a state of disrepair, declining occupancy and increasing costs. After considering several options including sale, rebuild, capital repair, and rehabilitation, CityHousing Hamilton opted to engage in a modernization program that would ensure long-term asset viability, and secure housing quality and indoor comfort for resident seniors while reducing the building’s environmental impact.

The Passive House standard was determined to be the best means of achieving these goals, kickstarting a broader program of Passive House development for CityHousing Hamilton’s portfolio at large. While organizations in the EU and Canada’s West Coast have adopted Passive House as a target, CityHousing Hamilton is one of the first large organizations in eastern Canada to do so.

At 18 storeys and more than 80,000 sq.ft., the Ken Soble Tower will be one of the largest EnerPHit certified projects in the world. The rehabilitation project will modernize 146 units of affordable seniors’ housing, while reinvigorating community spaces and outdoor gathering areas, allowing for aging-in-place and barrier-free living, and a changing climate. Slated for completion in 2020, the project will also provide residents with improved comfort and control of their indoor environments and with the ability to withstand extreme climate events into the future.

As one of the most complex EnerPHit projects in the region, the design of this project required the development of a number of new strategies and processes. Lessons were learned across the architectural, structural, building envelope, mechanical and electrical disciplines, which have been identified here in an effort to support the dissemination of the Passive The Ken Soble Tower in the late 1960s and now being modernized in accordance with the Passive House EnerPHit retrofit standard.

North America’s First EnerPHit Apartment Tower

House standard in the Ontario context.

LEAD ARCHITECT: ERA ARCHITECTS For lead architects and retrofit specialists ERA Architects, a highlyintegrated design process was required from the outset. To ensure that the holistic goals of Passive House were being met, an extremely high standard of coordination was adopted to the extent that even detailing decisions received inputs from a number of disciplines to ensure dynamic thermal comfort standards were being met. ERA hosted weekly collab-

By ERA Architects with Entuitive, Transsolar KlimaEngineering, JMV Consulting, Reinbold Engineering, Nemetz (S/A) & Associates.

orative design sessions, with all disciplines coming to the table to discuss shared impacts of their progress. Design solutions were assessed based on their ability to meet the stringent requirements of Passive House, and their familiarity and constructability in the local trade context.

The Ken Soble Tower Transformation is a groundbreaking project rehabilitating a post-war apartment tower in Hamilton, Ontario to the Passive House EnerPHit retrofit standard - reducing greenhouse gas emissions by 94% and laying the groundwork for the industry-wide repair and renewal projects which are urgently needed to maintain thousands of apartments across Canada.

This process required more work up front, but was rewarding and established strong teamwork from the start. With Passive House’s relative infancy in North America, ERA was also challenged in sourcing appropriate products not readily available in Canada for high-rise applications.

HVAC equipment, Passive House-certified windows, and appropriate insulation to meet the effective R38 envelope requirements were some of the primary sourcing challenges. This process revealed market gaps which will likely begin to be filled as Passive House construction becomes more standard in the Canadian market.

SABMag - FALL 2019

23

FIRE SAFETY IN TALL WOOD BUILDINGS Jim Taggart

SABMag - FALL 2019

27

Over the past decade, Canada has been developing regulations to promote the use of cross laminated timber (CLT) and other mass timber products, in a variety of new and larger scale applications. This has required much research and testing to establish standards for structural strength, fire performance, thermal and acoustic behaviour. Large scale testing of CLT panels has generated consistent results and assured scientists that large mass timber buildings can be designed to the standards of life safety and structural stability required by the National Building Code of Canada.

Nonetheless, the perception of some municipal authorities, local fire marshals, building owners and developers does not yet comfortably differentiate between the fire performance of light wood frame structures and those made of mass timber. This same perception is evident in Europe where many Tall Wood buildings are still required to have concrete podiums, stair and elevator shafts.

The Legacy of the Chicago Fire The reason is that almost all the large cities in Europe and North America had major fires in the 19th century that resulted in changes to the local building code, reducing the permissible height of wood buildings, or prohibiting them completely. However, the fire that devastated Chicago in 1871 impacted an entire continent.

Propelled by strong winds, the Chicago Fire destroyed 17,500 buildings, travelling from one to the next by igniting roof shingles, cladding, balconies and other exterior wood elements. More than 50 insurance companies declared bankruptcy and in response, the city of Chicago introduced a new bylaw requiring all new structures to be of ‘fireproof’ construction.

Loadbearing masonry became the default construction method, but within a decade, the emergence of reinforced concrete offered engineers and architects the possibility of high-rise structures with narrow columns and expansive glazing – a new aesthetic with instant and widespread appeal. With few exceptions, traditional timber building methods were eclipsed.

28

SABMag - FALL 2019

Cover: Canada's Earth Tower. Multi-storey winter gardens and selectively exposed wood structure bring nature into the tower form.

Architect: Perkins and Will.

Above: Earth Sciences Building. One of the largest panelized wood buildings in North America at its time of construction, and a precedent for future mass timber projects. Architect: Perkins and Will.

Photo Credit: Martin Tessler.

Right: Terrace House. Tall hybrid wood tower with flanking terraces that complement the Evergreen Building. Architect: Shigeru Ban. Credit: PortLiving.

THE HVAC SOLUTION TO DEVELOPING SUSTAINABLE BUILDINGS

Sustainable & Budget-Friendly Insulation www.airfoam.com

Insulated Concrete Forms www.quadlock.com

Experience the amazing efficiency and flexibility of Mitsubishi Electric’s HVAC solutions Learn more at: www.mitsubishielectric.ca/en/ hvac/professionals

by MOSO®

DURABLE - STABLE - SUSTAINABLE DECKING Certified by Wildland Urban Interface (WUI) Serving you accross North America CANADA / UNITED STATES TEL: 1 844-433-3354 FAX: 1 844-433-3329

www.richelieu.com / moso-bamboo.com Reily Imagery

SAB_MagQuarterPageAd_3.625x4.75_10.4.19_ENG.indd 1

2019-10-04 3:48 PM

we believe in exceeding performance standards And so do our building partners.

Innotech Windows + Doors delivers the manufacturing expertise and product performance required for your LEED® Platinum, net-zero energy and Passive House Certified multi-family and single family projects.

Learn more about the Defender 88PH System at innotech-windows.com/passive-house

SABMag - FALL 2019

35

Designing for

ACCESSIBILITY The Rick Hansen Foundation

BECOME A LEADER Prioritizing accessibility in design is a way to establish you and your organization as a leader in both innovation and social responsibility. Universal Design demonstrates a people-first approach, one that is able to meet a variety of needs for years to come.

The thing about Universal Design, says VP Access and Inclusion at the Rick Hansen Foundation Brad McCannell, is that “it’s invisible.” Those who don’t have a disability may not notice that there’s good colour contrast on the floor for navigation with a vision disability, or that the elevator has wide doors to accommodate a wheelchair. Individuals with disabilities, says McCannell, might not notice it either, which is a good thing: it means they didn’t have to overcome a challenge to get from A to B. Imagine knowing that your design positively impacts the way millions of Canadians navigate the built environment.

1

Even if an individual doesn’t have a disability, they are

1. The Rick Hansen Foundation Accessibility Certification™ uses a set of standards for the built environment that takes mobility, vision, and hearing disabilities into consideration.

BY: THE RICK HANSEN FOUNDATION More than 6 million Canadians aged 15 and over identify as having a disability, and this number is growing as our population ages. Are our buildings built in a way to support their needs, now and in the future? Not really. While building codes play an important role, we still have a long way to go to ensure people of all abilities have access to the spaces where we live, work, learn, and play. Here’s why this should matter to you.

more likely to live somewhere or support a business if they feel their values are in the right place. Plus, nearly 50% of Canadian adults say they have or have experienced a permanent or temporary disability, or live with someone who has . If they haven’t yet, chances are they will, and being prepared for the future gives you a leg up over your competition. This helps explain why over 2/3rd of Canadians believe all new buildings should be universally accessible.

A 2019 Angus Reid Institute public opinion poll found: - 67% of Canadians are concerned about future mobility challenges - 70% say new buildings should be universally

THE BUSINESS CASE

accessible

No matter the type of project you are designing, making it accessible is good

- 30% (9 million adults) consider accessibility when

business sense. Building owners and operators want to know they are working

deciding which business to visit

with someone who can maximize the number of people who can enter their facility. Designing for accessibility helps you do this, and that advantage helps

A ROADMAP TO ACCESSIBILITY

you stand out from others.

We all know accessible design is important, but with such a variety of regulations and opinions, knowing

For example, if it’s a residential building, it will appeal to a greater variety of

where to start can be a challenge in itself.

potential tenants or buyers, resulting in fewer vacancies and quicker sales. If it’s an office building there is easier access to a wider pool of qualified employees

The Rick Hansen Foundation Accessibility Certification™

and applicants. And if it’s a business, more people can access the storefront and

(RHFAC) program was created for industry to fill the

spend their money there.

gap between local building codes and the real needs of users. It offers an approach that is used nationally,

Not only is accessibility a human rights issue, it is an economic imperative.

providing consistent ratings across the country.

A 2018 report from the Conference Board of Canada shows that the positive impact accessibility can have on the economy should not be ignored:

36

The program uses a set of standards for the built envi-

- people with physical disabilities make up a large and growing consumer

ronment that takes mobility, vision, and hearing disabili-

group—14.3% of consumer spending, or $164 billion per year.

ties into consideration. Designated RHFAC Professionals

- Improvements to workplace access would allow 550,000 Canadians with

use a rating scale to identify barriers in both designs

disabilities to work more hours, increasing GDP by $16.8 billion by 2030.

and buildings on their level of meaningful accessibility.

SABMag - FALL 2019

IS AN EXCELLENT CHOICE FOR ANY GREEN BUILDING PROJECT

Products certified to SFI are recognized by many leading green building rating programs around the world like Leadership in Energy and Environmental Design (LEED) and Green Globes.

Using wood products from responsibly managed forests is key to any green building project.

Third-party forest certification standards, like the Sustainable Forestry Initiative® (SFI), are a proof-point that wood comes from responsibly managed forests that have been managed for multiple environmental, social and economic values — today and into the future.

Architects and builders are turning to products certified to the SFI Standard to meet their green building needs.

Learn more at: sfiprogram.org/green-building

Subscribe to

SABMAG DIGITAL

Readers can now access SABMag on their phones and tablets through iTunes, Pocketmags and on Google Play.

These versions have identical content to that in the print magazine, but include links in the articles to related information.

iTunes: http://apple.co/2cTFKhM Pocketmags: http://bit.ly/2gsGA7T Google Play: http://bit.ly/2hpNfwV

Stay informed with SABMag's

monthly newsletter

Subscribe here https://sabmagazine.com/ newsletter/ SABMag - FALL 2019

39

1

Charter Telecom Headquarters

With this corporate philosophy, the company’s primary objective was to create a new headquarters building that would provide its employees with the best possible work environment. To realize this goal, the company was willing to embrace two non-traditional approaches to building design that are still in their infancy in Canada: Passive House and mass wood construction. Both these approach-

Passive House with hybrid construction achieves highest quality environment for employees

By Graeme Verhulst

es were made more challenging by the restricted site, which quickly became the main driver of design.

On the narrow, 20-metre wide lot, the entire width would have been taken up by a conventional surface parking arrangement with a central drive aisle and two rows of cars, while the ramp to an underground garage would have

Founded 25 years ago, Charter Telecom is a high-tech company that builds, maintains and operates secure, highperformance communications networks and data centre infrastructure for large public and private sector clients around the world. In a sector where employee retention is an ongoing challenge, Charter views its workforce as a family. Many of its staff of over 100 have been with the company for two decades or more.

40

SABMag - FALL 2019

reduced the number of stalls that could have been accommodated. Instead, the decision was made to minimize the ground floor footprint of the building and to bridge the upper three floors over a drive aisle and single row of surface parking. Zoning required a six metre setback on the west leaving a narrow strip on the east side for shear walls to come all the way to the ground. In a high seismic zone, the resulting lateral forces could not be resolved using light wood frame construction, so a hybrid solution was required.

The Heights, 388 Skeena Street in Vancouver, B.C., is currently Canada’s largest Passive House building

PHC Canada’s first Passive House certified window Manufactured in Delta, BC, and used extensively in single family and multi family Passive House projects throughout the Pacific Northwest Recent projects include: • Charter Telecom Headquarters, Victoria, BC • Valleyview Townhall, Valleyview, AB • The Heights, Vancouver, BC

To find out more, call or visit us

1.800.337.8604

www.euroline-windows.com SABMag - FALL 2019

45

MARK YOUR CALENDARS

BUILDING

LASTING CHANGE

2020 JUNE 3 – 5, 2020 BEANFIELD CENTRE, TORONTO 46

For sponsorship opportunities contact | Sarah Burns | 613-288-8097 | sburns@cagbc.org

SABMag - FALL 2019

The winners of the 2019 Canadian Green Building Awards

NATIONAL SPONSORS

The Awards presentation of the 2019 Canadian Green Building Awards, the annual program of Sustainable Architecture & Building [SABMag], took place in Vancouver on May 27, 2019 where the winning firms were recognized. We especially thank our sponsors who make the Awards possible.

ARCHITECTURAL CATEGORY SPONSORS

1. Muhammad Kashif (right) of Category Sponsor Mitsubishi Electric Sales of Canada presents the Commercial/Industrial [Large] Award for the Evolv1 Building to Dr. Andrea Frisque of Stantec.

1 6

2. Jennifer McGill (right), of National Sponsor Masonite Architectural, presents the Institutional [Large] Award for the Okanagan College Trades Renewal and Expansion Project to Michael Leckman of Diamond Schmitt Architects Inc. 3. On behalf of National Sponsor The Canadian Precast Prestressed Concrete Institute, juror Ron Kato (centre) presents the Commercial/Industrial [Small] Award for the Sechelt Water Resource Centre to Brian Wakelin (left) and Robert Drew of Public Architecture + Communication.

2

7

4. Ron Kato (right), representing Category Sponsor Enbridge Gas Inc., presents the Existing Building Upgrade Award for the Wellington Building Rehabilitation to David Clusiau of NORR Architects and Engineers.

5. On behalf of National Sponsor, the Canadian Precast Prestressed Concrete Institute, juror Lisa Bate (left) presents the Technical Award for the City of Calgary Composting Facility to Megan Leslie of Stantec.

3 8

7. On behalf of Category Sponsor Inline Fiberglass, juror Lisa Bate (left) presents the Residential Building [Large] Award for the Duke Apartment Building to Mark Ostry (second left) and Russell Acton (far right) of Acton Ostry Architects Inc. Pete Edgar of building owner Edgar Development Corp. is second right.

4

9

Visit https://sabmagazine.com/ awards/winners for more details.

5

6 Jennifer McGill (centre) of National Sponsor Masonite Architectural presents the Institutional [Small] Award for the Radium Hot Springs Community Hall and Library to Shelley Craig and Jordan Edmonds of Urban Arts Architecture Inc.

For details on sponsoring the 2020 Canadian Green Building Awards contact dgriffith@sabmagazine.com.

8. Representing National Sponsor the Canadian Precast Prestressed Concrete Institute, juror Ron Kato (right) presents the Existing Building Upgrade Award for the Bank of Canada Renewal to Zeina Elali (left) of Perkins+Will and Colleen Sullivan of the Bank of Canada.

9. Lindsay Oster (left), principal of Prairie Architects Inc. receives the Institutional [Small] Award for the Building Blocks on Balmoral at Great West Life from Jennifer McGill of National Sponsor Masonite Architectural.

SABMag - FALL 2019

47

MAKING BUILDING PERFORMANCE A SELLING POINT, AND MOVING ON FROM THE GLASS TOWER

By Richard Witt, Executive Principal, Quadrangle & Michelle Xuereb, Director of Innovation, Quadrangle

Michelle Xuereb

Richard Witt

Sustainable building design is not a new concept. With the development and implementation of LEED in the early 1990s, sustainability became mainstream but has struggled to effect real change in the way we think about building performance, requirements or aesthetics. Economics and sustainable building design are at odds – sustainability is an extra cost, weighed against budget and relative value.

The Council of Tall Buildings and Urban Habitat concluded in their study Downtown High-Rise vs. Suburban Low-Rise Building that recently completed buildings significantly underperform in comparison to their counterparts from 50 years ago. The days of the glass skyscraper are coming to an end. Passive systems direct the way forward, as opposed to compensating for inefficiency with active systems.

C

M

Y

Passive solutions allow us to both mitigate and adapt to changing weather.

Based on the Climate Driver Study completed for the City of Toronto, we know that days are getting hotter, there are more of them and there are more of them strung together in heat waves. We are also experiencing larger storms, with heavier amounts of precipitation falling at once. The main issue we will have with 1

our buildings is overheating and flash flooding – both in combination with power outages. This again reinforces the need for passive design solutions.

1. In Quadrangle’s project “St. Clair Village” a punched window aesthetic has been designed to have window shapes and sizes which reduce the window-to-wall ratio and are also slightly different to respond to their aspect (north, south, east, west).

These power outages generally happen on our hottest and coldest days as a

Buildings are the key contributor and solution to climate change mitigation and adaptation.

The City of Toronto recommends that people be able to function independently

According to the latest inventory release (2017)

homes.

result of people cranking their AC or heating. The higher the total effective R-value of the building, the better they are able to maintain the indoor air temperature in the case of extreme temperatures without power.

for a minimum of 72 hours without power. In a residential building, maintaining indoor temperature is key to allowing people to shelter in place within their

by The City of Toronto, 52% of GHG emissions in

48

Toronto come from buildings, predominantly from

• At a basic level, a building is meant to shelter people from the weather – to

burning natural gas to heat indoor spaces and water.

keep people warm when it’s cold and cool when it’s hot. Glass is a very poor

Consequently, buildings must also be a climate change

insulator, leaving residents feeling physically uncomfortable and paying high

solution. The City of Toronto recognizes this in its Zero

energy bills.

Emissions Building Framework, which is why the

• As architects, the best thing you can do is reduce the amount of glass and

Toronto Green Standard (TGS) has us on a path to net

increase the amount of well-insulated walls. We understand that keeping win-

zero buildings by 2030. What about the code? There

dows to about 40% of the wall area is the single most effective way to reduce

is a plan to move Toronto to net zero by 2030, but it

the energy footprint of a building. Real walls with windows may seem old fash-

is not clear, given the current political climate, whether

ioned, but they don’t need to be. Our focus is on creating a thoughtful, well-

this proposal will be executed. Passive design solu-

designed building with an aesthetic that lends itself to real walls and windows.

tions increase durability and climate change resilience

• Unlike glass, insulation slows down the movement of heat. This allows you to

while lowering energy usage, embodied energy from

hold onto heat during winter, making people more comfortable and more likely

maintenance, and GHG emissions.

to actually use the spaces at the perimeter of their unit.

SABMag - FALL 2019

CM

MY

CY

CMY

K

To learn more, visit SavingsByDesign.ca

Dig deeper into sustainability and earn incentives for your building project.

North York Women’s Shelter,

Evergreen Brick Works, KILN BUILDING

24,000 SQUARE FOOT CENTRE

AND CENTRE FOR FUTURE CITIES

Savings

by Design Affordable Housing Program Savings

by Design Commercial Program

By participating in the Enbridge Savings by Design Workshop, we were able to discuss real costs of choices, both for construction and long-term operating. The overall building massing and layout was set by very complex program and siting restrictions, so the areas in which we benefited greatly were in rethinking storm water management on site, window type and performance, exterior wall assembly, and healthy materials.

The mechanical engineering part was also indispensable and so instructive; highlighting important and easy changes, discussing more complex upgrades, and understanding the long-term and performance impacts of our systems, both as climate change worsens and as building systems need replacement and upgrades.

The Enbridge charrette provided the perfect opportunity to make clear and informed choices that brought our project to the next level of energy, health and operating performance. It saved construction and operating costs and made for a healthier building.

— Chantal Cornu, LGA Architectural Partners

In 2018, Evergreen Brick Works was in the midst of an ambitious effort to transform the historic Kiln Building – and make it carbon neutral by using the right energy at the right time. Early in the process, Enbridge led a Savings by Design workshop for the project. On a fast track project, this provided a tremendous opportunity for the integrated design team to reflect on the early trajectory set in the project, and obtain informed perspectives from invited experts on enhancing it.

The workshop also provided a spring board to brainstorm how the Kiln Building project could serve as a catalyst to transform the entire Brick Works campus to be carbon neutral, which has been a longstanding vision of Evergreen.

The Savings by Design workshop struck a great balance between both blue sky and detail level thinking. It was informative, fruitful, and an overall positive experience. We’d highly recommend Enbridge’s Savings by Design workshop program for anyone thinking about making more sustainable buildings.

— Drew Adams, Associate, LGA Architectural Partners

SABMag - FALL 2019

49

YOUR LEED V4 QUICK-REFERENCE

CANADIAN DIRECTORY OF PRODUCTS AND SERVICES FOR SUSTAINABLE, HIGHPERFORMANCE BUILDING

Visit our on-line Directory to see hundreds of listings of companies which supply products and services for sustainable, high-performance building.

Listings are organized by Product Category and by LEED v4 Category.

Our LEED v4 Directory is created with the help of our partner:

Our 2019 Partners SITE | LANDSCAPING | RAINWATER HARVESTING Molok® Deep Collection™ System Dulux/PPG

Wishbone Industries Ltd.

Forbo Flooring Systems STRUCTURE & EXTERIOR ENVELOPE Alumicor Building Excellence Architek SBP Inc.

Nora Systems, Inc. Masonite Architectural Shaw Contract Group

Arriscraft Bailey Metal Products Ltd.

ELECTRICAL | PLUMBING | HVAC | RENEWABLES

Euroshield®

Acuity Brands

LiveRoof

Aqua-Tech

Nedlaw Living Walls

Elkay

Radon Environmental

Fantech

Thames Valley Brick & Tile

Sloan Valve Tempeff North America

THERMAL & WINDOWS Demilec, Heatlok Soya

Termobuild Viessmann Manufacturing Company Inc.

Eco Insulating Glass Inc. EuroLine Windows Inc.

GREEN DESIGN SUPPORT + PROFESSIONALS

Inline Fiberglass Ltd.

Canadian Precast Prestressed Concrete Institute

Innotech Windows + Doors

Diamond Schmitt Architects

LiteZone™ Insulating Glass

FABRIQ architecture

Pollard Windows Inc.

Pomerleau

Tech-Crete Processors Ltd.

RJC Engineers Sustainable Forestry Initiative

INTERIOR FINISHES CBR Products Columbia Forest Products

https://sabmagazine.com/product-directory/ 50

SABMag - FALL 2019

2

3

2. and 3. Residences at Portland (left) and CG Tower (right), both in Toronto, have building envelopes which will improve building performance. Better performance is not usually part of the real estate sales campaign, however, this information could, and would, be more available if sellers knew it was important to buyers.

Changing codes, standards, and their implications (GHG, TEDI, EUI).

2. Encourage energy modelling using both current and future

If there is a problem with this building design, why does it persist? That’s

3. Inspire clients with design ideas that integrate passive design

a tough question for a lot of people. All-glass residential buildings have

solutions into the initial concept.

weather files;

been the industry standard for a long time. These buildings are driven first and foremost by capital costs and ROI to the developer. They are cheap

In Quadrangle’s project “St. Clair Village” an evolved punched

and fast to build.

window aesthetic has been designed to have window shapes and sizes which not only reduce the window-to-wall ratio but are

Though the Ontario energy code is quite progressive, there are holes in

also slightly different to respond to their aspect (north, south,

the energy modelling requirements that allow the real impacts of thermal

east, west).

bridging to be missed. This means that window-wall buildings with high window-to-wall ratio (WWR) have continued to meet local codes and

What we can encourage purchasers to do.

standards to date. In the City of Toronto, this is intended to change with

Marketers focus on selling purchasers a lifestyle, but no discus-

the introduction of energy modelling based on absolute values that will

sion takes place about building performance. This is a major

be required for all buildings by the TGS in January, 2020.

issue; we need to educate and empower purchasers to have these conversations. Here are some things we can encourage

We will be required to provide three absolute values – greenhouse gas

people to ask:

emission intensity (GHGi), energy use intensity (EUI), and thermal energy

1. What is the reputation of the developer? Do they have a repu-

demand (TEDI). For a long time, energy modelling has allowed us to

tation for building quality, durable buildings?

trade off high-efficiency mechanical solutions for building envelope.

2. Will this be considered a high-performance building? Is it pre-

These three metrics are intended to change this and balance out decision

dicted to perform better than the current energy code and, if so,

making, ensuring that building envelope is measured both in conjunction

by how much?

with and independently of the mechanical systems. The TEDI will look

3. Is there an estimate of the utility bills available?

at thermal energy load independently of the heating source, so will look

4. Will my unit be able to maintain livable temperatures for a

at balancing heat losses and gains, predominantly through the build-

minimum of 72 hours as recommended by the City of Toronto?

ing envelope and also including ventilation air. GHGi will drive decision

5. Has a durability report been created for the project, and is it

making towards fuel sources with lower emission factors. In Ontario, this

possible to review the predicted maintenance schedule for the

means electricity over natural gas sources.

building?

What we should be doing as professionals.

Asking these questions will prompt a change in the way that

We can build arguments for developer reputation, for risks to developers

buildings are marketed. All three of the Quadrangle projects

with respect to climate change resilience and adaptability, etc., but mar-

illustrated, Residences at Portland, St Clair Village Condos and

kets, such as Toronto, are extremely competitive, and developers want to

CG Tower have a building envelope which will increase building

keep their competitive advantage as much as possible. The message we

performance and ultimately reduce purchase costs, but mar-

constantly encounter is that they would be willing to build high-perfor-

keters haven’t found that narrative increases sales, and better

mance buildings if that is what their competitors were doing because it

performance isn’t a part of the sales campaign. This information

would put them on a level playing field.

could, and would, be more available if sellers knew it was important to buyers.

If the market and codes are not demanding a better-quality building, why would they spend more to build one? As professionals, we have a public duty to be having these conversations so that our clients and purchasers make the right decisions. A few things we can do: 1. Have the tough conversations and advocate for building performance in

Richard Witt is Executive Principal, and Michelle Xuereb is Director of Innovation, both of Quadrangle in Toronto.

your client’s language – ROI, sales, purchaser satisfaction and risk;

SABMag - FALL 2019

51

´ REGISTER NOW ´ https://sabmagazine.com/awards/register/

FOR THE 2020 CANADIAN GREEN BUILDING AWARDS

THE NATIONAL PROGRAM OF SUSTAINABLE ARCHITECTURE & BUILDING MAGAZINE

The Awards recognize excellence in the design and execution of all types of sustainably-designed, high-performance Canadian residential and non-residential buildings and interiors, both new and renovated. Projects need not be certified under a green building rating system. Register now to receive an Entry Kit.

SCHEDULE

• Deadline for submissions / date limite pour soumettre vos projets March 6, 2020 / 6 mars 2020 • Judging date / délibération des juges March 13, 2020 / 13 mars 2020 • Winners announcement / dévoilement des gagnants June 1, 2020 / 1 juin 2020

ENTRY CATEGORIES - ELECTRONIC SUBMISSIONS ACCEPTED 1. Residential [small] 2. Residential [large] 3. Commercial/Industrial [small]

4. Commercial/industrial [large] 5. Institutional [small] 6. Institutional [large]

7. Mixed Use 8. Existing Building Upgrade 9. Interior Design

RECOGNITION - Winners announced June 1, 2020 in Toronto prior to the start of the CaGBC National Conference - Winning projects published in the Summer issue of SABMag which is also distributed to all attendees of the CaGBC National Conference - Winning projects published in the SABMag web site, www.sabmagazine.com, and in the SABMag monthly e-News - All projects submitted will be considered for publishing in SABMag and the CaGBC FOCUS publications

Thanks to our sponsors

National Sponsors

Category Sponsors

52

SABMag - FALL 2019

ARCHITECTURAL

PRECAST CONCRETE BUILDS ON...

RESILIENCY

The key attributes of enhanced architectural & structural resiliency are:

· · · · · ·

Resistance to disasters Short-term recovery from a crisis Longevity (long service life) Life safety Durability Adaptability for reuse

Maple Avenue Condos & Parking Garage, Barrie, Ontario Architect: Turner Fleischer Architects Inc. | Engineer: Hanna Ghabrial & Associates Ltd Owner: Auburn Developments

.ca Visit www.cpci.ca/publications to download your free copies of the Mitigate and Adapt Building our Communities in the Age of Climate Change brochure and the Structural Solutions technical publication.

.ca E: info@cpci.ca TF: 877.937.2724

Member

For more information on the Canadian Precast Concrete Quality Assurance (CPCQA) Certification Program, please visit: www.precastcertification.ca

.ca

SABMag - FALL 2019

.ca

53

Passive House on an upward curve Interview with Rob Bernhardt, CEO of Passive House Canada Rob works to advance building energy efficiency. A certified Passive House consultant and the developer of several certified Passive House projects, Rob is familiar with the economic and social advantages of high-performance buildings.

Their momentum and enthusiasm has given us the privilege of assisting all levels of government in building policy development, the ability to support the growth of a national membership of over 1,100 members (in eight provinces and two territories) and deliver hundreds of courses, with over 5,000 registrations across Canada.

This appetite for a higher standard of building bridged partnerships resulting in the launch of Canada’s first Zero Emissions

What is a Passive House Building and how does it work in Canada??

Building Exchange in Vancouver and a successful inaugural

Passive House (Passivhaus) is considered to be the most rigorous vol-

national conference with over 350 delegates attending each year.

untary energy-based standard in the design and construction industry today. They consume up to 90 percent less heating and cooling energy than conventional buildings. It is recognized internationally as the proven best way to build for comfort, affordability and energy efficiency of residential, institutional and commercial buildings, through all stages of design, construction, and livability.

Why do you think people are making the change to Passive House buildings?

While the initial driver is, of course, environmental and the common goal to mitigate climate change, this alone does not catalyze market transformation, represent the motivation of everyone involved, or simplify the process of managing change.

The Passive House approach works because it’s a pragmatic combina-

For many, the primary motivation is a desire to have better

tion of applied building science and economics. Designs and compo-

buildings. The unparalleled comfort, health, durability, resilience

nents vary to suit the local climate, enabling comparable levels of com-

and affordability of buildings offering Passive House levels of

fort, hygiene and performance in varied climates. All Passive House

performance are reason enough to make the choice. Affordable

buildings are designed using detailed energy modelling software,

housing advocates may focus on the reduced costs of owner-

which allows the design team modify the architecture and specify the

ship, operation and utility costs to tenants, homeowners on the

combination of insulation and components required to bring a building

comfort, while absolutely everyone craves a constant supply of

to the required performance standard in their own climate zone.

filtered fresh outdoor air.

Why was Passive House Canada created?

Some professionals, developers and trades are attracted by

Passive House Canada was incorporated by practitioners wanting to

the quality of work such buildings entail and enjoy the pride of

transform Canada’s buildings, making the multiple benefits of high per-

workmanship. Others know high performance building regula-

formance buildings the norm. We started with few high-performance

tions are coming and are looking for a competitive advantage,

resources in Canada but have ramped up resources through education-

a market differentiator, in establishing their company brand.

al services, events, advocacy and communications over the few years

Increasingly, some are simply responding to the developing

we have existed. With time Canada’s policy, regulatory and incentive

market for Passive House buildings and their components, which

environment has become very support of Passive House as the level of

they know will grow.

building efficiency required for Canada to meet its Paris commitments become apparent.

Why do you feel Canada is winning in the change to Passive House building?

Why do you think the movement has been successful so far?

During our 2018 conference, the federal government took the

The successes that we have experienced are directly attributable to

opportunity to say it is probable that the final tier of the Net

the dedication of industry professionals and elected officials who are

Zero Energy Ready Code will be very close to Passive House

passionate about sustainability.

standards. This is a significant win for Canada, and with recent budget support we can see our national buildings strategy taking root across cities and provinces, nationwide.

We know our role at PHC will change and likely diminish as building codes and standards approach Passive House performance levels and we can’t think of a better reason to become redundant.

Taking a “mission first” approach enables more rapid progress, facilitating collaboration with industry and consumers in addition to government. We can best achieve our mission by collaborating with aligned groups and individuals, and we invite you to do the same.

Dik Tiy Independent Living Facility, Smithers, British Columbia.

54

SABMag - FALL 2019

SABMag - FALL 2019

55

Uniting the house of design with the field of construction Uniting the house of design with the field of construction

University of Ottawa Learning Centre EQUITONE [tectiva], VIVIX phenolic, Fiandre Porcelain and TcLips™ Architect: HDR MaRS Building Photo: Curt Clayton

Engineered Assemblies

Photo: Shai Gil B+H Architects

EA benefits from twenty years of industry experience. From detailing to field installation practicality; EA provides a keen SystemsEA offer universal application eye on design and a strong handle on the and detailed design options for all EA limiting factors of the field.

Façade lines.

UNITING THE HOUSE OF DESIGN WITH EA benefits from twenty years of industry EA benefits from twenty years of industry •UNITING collaborates on OF design; providing EA SYSTEMS benefits from twenty years of industry THEEA HOUSE DESIGN WITH THE FIELD OF CONSTRUCTION experience. From detailing to field training, webinars, experience. From THE detailing toCONSTRUCTION field value-engineering, FIELD OF experience. From detailing to field installation practicality; EA provides a keen and learns, mockups, samples, • Thermally TcLip Broken Subsystem installation practicality; lunch EA provides a keen a keen • SystemsEA offerinstallation universal practicality; application EA provides eye on design and a strong handle on the EA offer universal application BIMSystems software, panel optimization, etc.

•eye on design Fastener Hidden System eye on design and a •strong handle onWITH the strong(HF) handle on the and detailed options forand all aEA UNITING THE HOUSE OF DESIGN benefits from design twenty years of industry limiting factors of the field. optionsEAfor all EA • and detailed provides EAdesignextensively-detailed, • Ventilated Rear Rain Screen Systems Façade lines. of the field. limiting factors of the experience.

From limiting detailingfactors to field THE FIELD OF field.

CONSTRUCTION Façade stampedlines. shop drawings andinstallation thermally(RVRS) practicality; EA provides keen • collaborates EA on design; aproviding EA SYSTEMS • from Systems offer EA universal application benefits UNITING THE HOUSE OF DESIGN WITH EA benefits twenty years of industry • broken collaborates EAsolutions. on design;eye providing façade • SYSTEMS systems work with all EA Façadefrom twenty years of industry on designwebinars, and a strong handle onEA the training, value-engineering, EA EA SYSTEMS and From detailed design options EAvalue-engineering, experience. From detailing to field THE FIELD OF CONSTRUCTION training, webinars, lines. experience. detailing tofor all field limiting factors the field.

•years of Thermally TcLip Broken Subsystem lunch and of learns, mockups, samples, Façade lines.

UNITING THE HOUSEsamples, OF DESIGN EA benefits from twenty industry installation practicality; EA provides a keen • optimization, Thermally TcLip Broken Subsystem lunch andAssemblies learns, mockups, Engineered understands and WITH installation practicality; EA provides a keen BIM software, panel Fastener System (HF) • OFSystems EA offer universal application • TcLip collaborates EA on design; providing • Thermally Broken Subsystem FIELD OF experience.

From to fieldHidden UNITING THECONSTRUCTION DESIGN WITH EA benefits frometc. twenty years detailing of • industry eye on design and a strong handle on the EA SYSTEMS • Fastener Hidden System (HF) BIM software, panel optimization, etc.

EA HIGH-PERFORMING FAÇADE LINES theTHE philosophy ofHOUSE partnership.

• and provides •provides Rain Screen Systems eye and a promotes strong handle on the THEWITH FIELD OF CONSTRUCTION experience. detailing EA to field Ventilated training, webinars, value-engineering, detailed design options forFrom all EA installation practicality; a keenRear UNITING THE HOUSE(HF) OF DESIGN EA benefits fromEA twentyextensively-detailed, years of industry • on design Fastener Hidden System limiting factors of the field.

•EA Systems offer EA • universal application •We maintain provides extensively-detailed, • Subsystem Ventilated Rear Rain Systems asamples, cooperative presence installation practicality; EA provides a(RVRS) keen lunch and learns, mockups, Thermally TcLip Broken stamped shop drawings and thermallyeye on design and aScreen strong handle on the Façade lines. limiting factors of the field.

THE FIELD OF CONSTRUCTION experience.

From detailing to field • Systems offer EA universal application • Fibre Equitone Cement façade • Ventilated Rear Rainpanel Screen Systems eye on design and a strong handle on the anddrawings detailed options for all System EA (RVRS) stamped shop and focus on achieving thedesign desired goal; BIM software,and optimization, etc.

•• thermallyFastener (HF) limiting factors of the field.• systems EA work with all EA Façade broken façade solutions. and detailed design options for allHidden EA installation practicality; EA limiting provides aproviding keen collaborates EA design; factors of the field. façade •on Natural Parklex Wood Façade EA SYSTEMS Systems offer EA universal application (RVRS) •• Façade lines.and provides EA extensively-detailed, • on Ventilated Rear Rain Screen Systems • systems EA work with all EA Façade broken façade solutions. completing a project onlines. time budget eye on design and a strong handle on the lines. training, webinars, value-engineering, • lines.

Porcelain Fiandre façade • for collaborates EA EA on design; providing EA and design all EA standards.

•industry collaborates on design; providing (RVRS) stamped shop drawings and thermallyEA SYSTEMS • SYSTEMS systems EAdetailed work with alloptions EA to the highest ofFaçade EAunderstands SYSTEMS limiting factors of the field.

Engineered andfaçade • lunch andAssemblies learns, mockups, samples, Thermally TcLip Broken Subsystem training, webinars, value-engineering, training, webinars, value-engineering, Phenolic Vivixfrom •with Façade lines. solutions.

EA twenty years of industry UNITING THE HOUSE DESIGN WITH • OF systems work EA allSolid EA benefits Façade broken façade Engineered Assemblies understands andthe promotes philosophy partnership.

EA HIGH-PERFORMING FAÇADE lunch and learns, mockups, samples, • •of Thermally Broken TcLipTcLip Subsystem System (HF) LINES BIM panel etc. lunch and learns, mockups, samples, Thermally Broken Subsystem • TcLip collaborates EA on design; providing • lines. Thermally Broken Subsystem THE FIELD OF CONSTRUCTION experience.

From detailing to Fastener fieldHidden •EA optimization, Ceramic Tonality façade UNITING THE HOUSE OF software, DESIGN WITH EA benefits from twenty years of • industry lines.

EA SYSTEMS BIM software, panel optimization, • • Fastener Hidden System (HF) HIGH-PERFORMING FAÇADE LINES promotes philosophy of partnership.

We takevalue-engineering, athe common-sense approach to etc.

We maintain a cooperative presence Fastener Hidden System (HF) BIM software, panel optimization, etc.

• provides EA extensively-detailed, •provides Ventilated RearRain Screen Systems experience.

From detailing to fieldSteel THE FIELD OF CONSTRUCTION training, webinars, practicality; EA a keen Engineered Assemblies understands andprovides EAextensively-detailed, • • installation Zinc,Corten, Copper, Stainless & Equitone • Fastener HiddenSystem (HF) • Systems Ventilated Rear Rain Screen Systems •a keen Fibre Cement façade • asamples, offer EA •and universal application We maintain cooperative presence systems development; offering functional installation practicality; EA provides provides extensively-detailed, • Ventilated Rear Rain Screen Systems focus on achieving the desired goal; lunch and learns, mockups, Thermally TcLip Broken Subsystem (RVRS) on the shop drawings andon thermallyeye design and a façade strong EA FAÇADE LINES promotes the philosophy of partnership.

EA HIGH-PERFORMING FAÇADE LINES shopoffer drawings andapplication thermally(RVRS) • stamped Systems EAstamped universal • Aluminum Fibre Equitone Cement façade •onhandle Natural Parklex Wood façade • HIGH-PERFORMING Ventilated Rear Rain Screen Systems eye on design and a strong handle the and detailed design options for all EA stamped shop drawings and thermally(RVRS) and focus on achieving the desired goal; assemblies that are cost effective without a project on time and onfactors budget BIMmaintain software, apanel optimization, etc.detailed •completing Fastener System broken façadedesign solutions.

• (HF) systems work EAwith all field.

EA •Façadesystems EA limiting of the work with all EA Façade broken façade solutions. and options for allHidden EA We cooperative presence limiting of the field.

Natural Parklex Wood • façade Daylighting CPI solutions Porcelain Fiandre façade Façade lines.

• FibreEquitone Cement • factors systems work EA façade with• lines. all EA Façade broken solutions. lines.

Façade lines.and provides EA façade extensively-detailed, •toon Ventilated Rear Rain Screen Systems completing project onfaçade time budget the designer’s intent. the highest of industry standards.

• (RVRS) •and Fibre Equitone Cement focus on compromising achieving theadesired goal; Porcelain Fiandre • façadeEAlines.

Metal Imetco roof façade and wall systems • thermallycollaborates EA •EA on design; providing Solid Phenolic Vivix façade • Engineered Assemblies understands and Natural Parklex Wood collaborates on design; providing stamped shop drawings and (RVRS) SYSTEMSand systems EA work with all Façade to the industry standards.

Our systems offer universal applications completing a project onhighest timeEA andof on•promotes budget EAunderstands SYSTEMS Assemblies •• Natural Parklex Wood façade the philosophy of Porcelain partnership.

HIGH-PERFORMING FAÇADE•LINES training,webinars, webinars, value-engineering, training, value-engineering, ••Engineered Fiandre façade Solid Phenolic Vivix façade •with EAall Engineered Assemblies understands Ceramic Tonality façade systems work EA and EAapproach Façade façade solutions. tobroken the highest of industry standards. across all EA façade lines; enabling design We take a common-sense to lines.

We maintain a cooperative presence promotes the philosophy of partnership.

EA HIGH-PERFORMING FAÇADE LINES lunch andlearns, learns, mockups, samples, • • Thermally Broken TcLipTcLip Subsystem lunch and mockups, samples, Thermally Broken Subsystem • Porcelain Fiandrefaçade • lines.

Solid Phenolic Vivix •façade promotes the philosophy of partnership.

HIGH-PERFORMING LINES • EACeramic Fibre Cement Equitone façade Tonality façade •FAÇADE Zinc,Corten, Copper, Stainless Steel & and focus on achieving the desired goal; BIM software, panel optimization, • • Fastener Hidden System (HF) systems development; functional We take and a common-sense approach to etc. freedom ease of installation. maintain afaçade cooperative presence BIM software, optimization, etc.

Fastener Hidden System (HF)Steel &façade •We Ceramic Tonality •offering Natural Wood Parklex façade We maintain apanel cooperative Engineered and Solid Phenolic façade understands • Aluminum Zinc, Corten, Copper, Stainless completing a project onextensively-detailed, time and onpresence budget • We Vivix take a Assemblies common-sense approach toprovides • EA • effective Ventilated Rear RainEquitone Screen Systems •façade Fibre Equitone Cement façade Cement assemblies that are cost without systems development; offering functional • the Porcelain Fiandre façade •• desired Ventilated Rear Rain Screen Systems •and provides EA extensively-detailed, and focus on achieving goal; •EA Zinc, Copper, Corten, Stainless Steel &Fibre focus on achieving the desired goal; to the highest of industry standards.

EA HIGH-PERFORMING FAÇADE LINES promotes the philosophy of partnership.

HIGH-PERFORMING FAÇADE LINES (RVRS) stamped shop drawings and thermallysystems development; offering functional • Daylighting CPI solutions Aluminum • Ceramic Tonalityfaçade Natural Parklex Wood façade Natural Parklex Wood façade Solidfaçade Phenolic Vivix façade • • (RVRS) compromising the on designer’s intent. stamped shop drawings and thermallyassemblies that are cost effective without Aluminum completing a project time and on budget completing a project on time andfaçade on budget • systems work EAwith all EA Façade broken façade solutions.

OUR PARTNERS: We maintain cooperative presence assemblies thataare cost effective without • Daylighting Ceramic façade Tonality Metal Imetco roof façade and wall systems •universal CPI solutions •• applications Porcelain Fiandre Porcelain Fiandre Zinc, Corten, Copper, Stainless Steel &designer’s FibreCPI Equitone Cement façade We take a common-sense approach to façade systems work EA façade with• all EA Façade lines.

••to Daylighting solutions Ourthesystems offer tobroken the highest of solutions. industry standards. the intent. highest of industry •• Fibre Equitone and focusCement on compromising achieving the desired goal; • standards.

Zinc, Copper, Corten, Stainless compromising thefaçade designer’s intent.

• lines.

Solid Phenolic Vivix façade systems development; offering functional • lines; Metal Imetco roof and wall systems Vivix façade •Steel & Solid Phenolic Engineered Assemblies understands and Natural Parklex Wood façade ••across roof Imetco and wallAluminum systems façade allMetal EA façade enabling design façade Ourfaçade systems offer universal applications completing a project on time and onpromotes budget Our systems offer universal applications • Aluminum Natural Parklex Wood assemblies thatphilosophy are costunderstands effective without • Ceramic Tonality façade the of Porcelain partnership.

EA HIGH-PERFORMING FAÇADE LINES • Fiandre façade Engineered Assemblies and • Ceramic Tonality façade • Daylighting solutions CPIto We compromising take a common-sense approach freedom and ease to of installation. to the highest of industry across all standards.

EA façade lines; design Daylighting CPI solutions We take apresence common-sense approach designer’s intent. across all EA façade lines; enabling design We maintainenabling athe cooperative • Zinc, Copper, Corten, Stainless Steel & •• Porcelain Fiandre façade • Solid Phenolic Vivix façade • Metal roof Imetco and wall systems promotes the philosophy of partnership.

EA HIGH-PERFORMING FAÇADE LINES Fibre Cement Equitone façade • Zinc,Corten, Copper, Stainless Steel & systems development; offering functional Our systems universal applications and on offer achieving the desired goal; freedom and and ease of installation. development; functional freedom and ease offocus installation.

Aluminum façade Metal Imetco roof wall systems •systems Ceramic Tonality façade •offering Natural Wood Parklex façade We maintain aarecooperative assemblies cost effective without Solid Phenolic façade •• across all EA façade lines; enabling design Aluminum façade completing a project on time and onpresence budget We Vivix take a common-sense approach tothat Equitone Cement that are cost without • Porcelain Daylighting CPI solutionsfaçade • effective Fiandre façade PARTNERS: •assemblies Zinc, Copper, Corten, Stainless Steel &Fibre and on the desired goal; freedom andachieving ease of OUR installation. tofocus the highest ofthe industry standards. compromising designer’s intent. systems development; functional • systems Daylighting CPIsolutions • Ceramic Tonality façade offering Natural Parklex Wood Vivix façade • • Solid Phenolic Metal roof Imetco and façade wall OUR PARTNERS: the designer’s intent.

Aluminum façade completing a project on time and on budget Our without systems offer compromising universal applications OUR PARTNERS: assemblies that are cost effective • Ceramic façade Tonality • Metal Imetco roof and wall systems • Porcelain Fiandre façade • Zinc, Corten, Copper, Stainless Steel &PARTNERS: We take a common-sense approach to universal applications OUR •Our systems Daylighting CPI solutions offer UNITING THE HOUSE OF DESIGN WITH THE FIELD OF CONSTRUCTION

Engineered Assemblies EngineeredEngineered AssembliesAssemblies

MaRS Building Photo: Shai Gil B+H Architects

•

UNITING THE HOUSE OF DESIGN WITH THE FIELD OF CONSTRUCTION

Engineered Assemblies

Engineered Assemblies

•

Systems EA offer universal application and detailed design options for all EA Façade lines.

UNITING THE DESIGN WITH • collaborates EAHOUSE on OF design; providing THE FIELD OF CONSTRUCTION training, webinars, value-engineering, and EA learns, mockups,application samples, • lunch Systems offer universal BIM software, panel optimization, and detailed design options for etc. all EA • Façadeprovides EA extensively-detailed, lines. drawings and thermallyEAcollaborates benefitsshop from yearsdesign; of industry NG THE HOUSE OF DESIGN WITH • stamped EA twenty on providing experience.

Fromsolutions. detailing to field FIELD OF CONSTRUCTION broken façade training, webinars, value-engineering,

Engineered Assemblies

Engineered Assemblies

Engineered Assemblies Engineered Assemblies Assemblies Engineered Engineered Assemblies (EA) supplies world-class facade materials Engineered Assemblies ngineered Assemblies Engineered Assemblies (EA) in supplies world-class facade materials backed backed by leading expertise Rear-Ventilated Rain Screen (RVRS) Engineered Assemblies Engineered Assemblies Rain Screen (RVRS) sub-structure by leading expertise in Rear-Ventilated Engineered Assemblies (EA) supplies facade materials sub-structure assemblies.

Through theworld-class spirit of partnership, EA delivers lunch and learns, mockups, samples, Engineered Assemblies understands and BIM software, panel optimization, etc.

Through the spirit of partnership, EA delivers excellence creative ngineered Assemblies the ofassemblies. partnership.

•promotesprovides EAphilosophy extensively-detailed, backed by leading expertise in Rear-Ventilated Rain Screen (RVRS) excellence in creative design possibilities, bringing imagination toinlife.

We maintain cooperative presence stamped shopa drawings and thermallyand focusfaçade on achieving the design desired goal; broken solutions. possibilities, bringing imagination to life. completing a project on timesub-structure and on budget assemblies. Through the spirit of partnership, EA delivers

installation practicality; EA provides a keen Systems offerEAuniversal application eye on design and a strong handle on the detailed design options for all EA limiting factors of the field. ade lines. collaborates EA on design; providing EA SYSTEMS ning, webinars, value-engineering, • Thermally Broken TcLip Subsystem ch and learns, mockups, samples, EA benefits from twenty years of industry NG THE HOUSE OF DESIGN WITH • Fastener Hidden System (HF) M software, panel optimization, etc. experience. From detailing to field FIELD OF CONSTRUCTION • Ventilated Rear Rain Screen Systems provides EAextensively-detailed, installation practicality; EA provides a keen (RVRS) mped shopoffer drawings andapplication thermallySystems EAuniversal eye on design and a strong handle on the • highest systems of work EA with all EAstandards.

Façade ken façadedesign solutions. detailed options for all EA to the industry limiting factors of the field.

Engineered Assemblies understands and lines. ade lines. eered Assemblies understands and promotes the philosophy of partnership. collaborates EA on design; providing EA SYSTEMS HIGH-PERFORMING FAÇADE LINES otes the philosophy of partnership. We EA ning, webinars, value-engineering, take a common-sense approach to cooperative presence maintain a cooperative Thermally a Broken TcLip Subsystem ch and learns, mockups, presence samples, We • maintain • Fibre Cement Equitone façade systems development; offering functional on achieving the desiredetc. goal; and • Fastener Hidden System (HF) M software, panel optimization, on achieving •focus Natural Wood Parklex façade the desired goal; pleting a projectEA onextensively-detailed, time and on budget assemblies • Ventilated Rear Rain cost Screen effective Systems provides that are without • Porcelain Fiandre façade emped highest of industry (RVRS) a project on time and on budget shop drawingsstandards. and thermally- completing • Solid Phenolic Vivix façade compromising the intent.

• highest systems of work EA with alldesigner’s EAstandards.

Façade ken façade solutions. to the industry Ceramic façade Tonality ake a common-sense approach to Our •systems lines. universal • Zinc, offer Copper, Corten, Stainless Steelapplications & development; functional eered Assemblies offering understands and Aluminum façade across all EA façade lines; enabling design mblies that are cost effective without HIGH-PERFORMING FAÇADE LINES otes the philosophy of partnership. We EA a common-sense approach to •takeDaylighting solutions CPI promising designer’spresence intent. freedom maintain athe cooperative and ease ofwall installation.

• Metal roof Imetco and systems Fibre Cement Equitone façade systems universal applications on offer achieving the desired goal; systems development; offering functional • Natural Wood Parklex façade façade on lines; design assemblies pleting a project timeenabling and on budget that are cost effective without • Porcelain Fiandre façade and ease of installation. eom highest of industry standards.

• Solid Phenolic Vivix façadedesigner’s OUR PARTNERS: compromising the intent.

Ceramic façade Tonality ake a common-sense approach to Our •systems R PARTNERS: universal • Zinc, offer Copper, Corten, Stainless Steelapplications & development; offering functional Aluminum all EAfaçade façade lines; enabling design mblies that are cost effective without across • Daylighting solutions CPI promising the designer’s intent. freedom and ofwall installation.

• Metalease roofImetco and systems systems offer universal applications

UNITING THE HOUSE OF DESIGN WITH THE FIELD OF CONSTRUCTION •

Systems offerEAuniversal application and detailed design options for all EA Façade lines.

• collaborates EA on design; providing training, webinars, value-engineering, lunch and learns, mockups, samples, UNITING THE HOUSE OF DESIGN WITH BIM software, panel optimization, etc.

THE FIELD OF CONSTRUCTION • provides EAextensively-detailed, shopoffer drawings andapplication thermally• stamped Systems EAuniversal broken façadedesign solutions. and detailed options for all EA Façade lines.

Assemblies understands and •Engineered collaborates EA on design; providing promotes philosophy of partnership. training, the webinars, value-engineering, We maintain a cooperative lunch and learns, mockups, presence samples, and on achieving the desiredetc. goal; BIMfocus software, panel optimization, a projectEA onextensively-detailed, time and on budget •completing provides tostamped the highest of industry shop drawingsstandards. and thermallybroken façade solutions.

We take a common-sense approach to systems development; functional Engineered Assemblies offering understands and assembliesthe thatphilosophy are cost effective without promotes of partnership. compromising designer’spresence intent.

We maintain athe cooperative Our systems universal applications and focus on offer achieving the desired goal; across all EA façade lines; enabling design completing a project on time and on budget freedom and ease of installation. to the highest of industry standards.

Contact us today at info@engineeredassemblies.com excellence in creative design possibilities, bringing imagination to life.

Contact us today at info@engineeredassemblies.com EngineeredAssemblies.com | 1 866 591 7021 | #brilliantbuildings EngineeredAssemblies.com | 1 866 591 7021 Contact us today at info@engineeredassemblies.com EngineeredAssemblies.com | 1 866 591 7021 | #brilliantbuildings Aluminum façade

façade lines; enabling design om and ease of installation.

OUR PARTNERS:

R PARTNERS:

• •

to the intent. highest of industry across all EA façade lines;standards. enabling design • Zinc, Copper, Corten, Stainless Steel & compromising the designer’s • Solid Phenolic Vivix façade systems development; offering functional •across roof Imetco andlines; wallAluminum systems allMetal EA façade enabling design façade and ease of installation.

Our systems offer universal freedom applications assemblies that are cost effective without • Ceramic Tonality façade

• Daylighting solutions CPI We compromising take a common-sense approach freedom and intent. ease to of installation.

Daylighting CPIall EA solutions the designer’s across façade lines; enabling design Zinc, Corten, Stainless Imetco andCopper, wall systems systems development; offering functional • • Metal roof Our PARTNERS: systems offer universal applications freedom and and ease of installation.

OUR Aluminum façade Metal Imetco roof wall systems assemblies are cost without across all that EA façade lines;effective enabling design

OUR PARTNERS:

PARTNERS: freedom and ease installation. compromising theof OUR designer’s intent.

Our systems offer universal applications PARTNERS: acrossOUR all EA façade lines; enabling design freedom and ease of installation.

OUR PARTNERS:

• •

We take a common-sense approach to OUR PARTNERS: systems development; offering functional assemblies that are cost effective without compromising the designer’s intent.

Our systems offer universal applications across all EA façade lines; enabling design freedom and ease of installation.

Steel &

EA benefits from twenty years of industry experience. From detailing to field installation practicality; EA provides a keen eye on design and a strong handle on the limiting factors of the field.

EA SYSTEMS

• Thermally Broken TcLip Subsystem EA benefits from twenty years of industry • Fastener Hidden System (HF) experience. From detailing to field • Ventilated Rear Rain Screen Systems installation practicality; EA provides a keen (RVRS) eye on design and a strong handle on the • systems work EAwith all EA Façade limiting factors of the field. lines.

EA SYSTEMS EA HIGH-PERFORMING FAÇADE LINES • Thermally Broken TcLip Subsystem • Fibre Cement Equitone façade • Fastener Hidden System (HF) • Natural Wood Parklex façade • Ventilated Rear Rain Screen Systems • PorcelainFiandre façade (RVRS) • Solid Phenolic Vivix façade • systems work EAwith all EA Façade • Ceramic façade Tonality lines.

• Zinc, Copper, Corten, Stainless Steel & Aluminum façade EA HIGH-PERFORMING FAÇADE LINES • Daylighting solutions CPI • • • • • •

Metal Imetco and wall systems Fibreroof Cement Equitone façade Natural Wood Parklex façade PorcelainFiandre façade Solid Phenolic Vivix façade Ceramic façade Tonality Zinc, Copper, Corten, Stainless Steel & Aluminum façade • Daylighting solutions CPI • Metal roofImetco and wall systems

OUR PARTNERS:

DaylightingCPI solutions Metal roof Imetco and wall systems

Our Partners

5

5 5

5

5

5

56

SABMag - FALL 2019

5

5

5

5