Fill fl ash

Fill flash can be a very useful way of lowering the brightness range. Often the photographer is unable to reposition the primary subject and the addition of fill light from the camera’s position is essential to the image’s success. The aim of fill flash is to reveal detail in the dark shadows created by a harsh directional light source. The aim is not to overpower the existing ambient light and remove the shadows completely. If the power of the flash is too high the light will create its own shadows, creating an unnatural effect. Mount the flash unit on the camera’s hot shoe and direct the flash towards the subject. To retain the effect of the primary (ambient) light source the flash is most commonly fired at half or quarter power. The ratio of ambient to flash light is therefore 2:1 or 4:1.

Manual - Select a smaller aperture on the camera from the one that is indicated by the flash unit or flash meter, e.g. if the meter or unit indicates f5.6 select f8 or f11 on the camera. Compensate for the reduced aperture by selecting a slower shutter speed on the camera so that the ambient light exposure is still appropriate for your subject. This action will lead to correctly exposing the ambient light and underexposing the light from the flash unit. Automatic - Many automatic flash units have the facility to fire at 1/2 or 1/4 power, making fill flash a relatively simple procedure. If this facility is unavailable set the ISO on the flash unit to double or quadruple the actual speed of the ISO set in the camera to lower the output. Dedicated - Many sophisticated cameras and dedicated flash units have a fill flash option. This should be regarded as a starting point only and further adjustments are usually required to perfect the technique. Power often needs to be further lowered for a more subtle fill-in technique. The photographer may also wish to select a ‘slow-sync’ option on the camera, if available, to avoid underexposing the ambient light in some situations.

Activity 5

Create an image using the fill flash technique. Lower the lighting contrast of a portrait lit with harsh sunlight. Experiment to see if you can lower the flash output on your unit to half or quarter power. Discuss the light quality of the resulting image and the fill/ambient lighting ratio.