Electron B2300 B2 00
S.R.L.
Design Production & Trading of Educational Equipment
ELECTRONIC CONSTRUCTION KITS
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 08/00 Specifications may change without notice
page - 1 -
File LEAFLET B2300
B2300B2300-K1 – FM RECEIVER KIT
General:
The FM Receiver consists of the following sections:
This FM Receiver in kit form is of the latest design and includes integrated circuitry in all stages . The panel operates in the 88-108 MHz band.
RF amplifier/local oscillator/mixer, built around an advanced feature IC Varicap tuning and AFC control IF amplifier with AGC control and FM detector, built around another advanced monolithic IC Audio amplifier with tone and volume controls
The kit contains all the electronic components, circuit boards and hardware necessary to complete the project. Printed on the circuit board there is a clear silk-screen diagram of the component positions and shapes. Test points are provided for the execution of setup, regulation and examination of the circuit operation.
The kit requires an external +15V stabilized power supply.
Ordering code: B2300-K1
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 08/00 Specifications may change without notice
page - 2 -
File LEAFLET B2300
B2300B2300-K2 – AM RECEIVER KIT
General: This is a high performance AM Radio Receiver of a classic design in kit form. It is built around discrete components in the RF and IF stages. The kit also has an integrated circuit as an audio power amplifier. The kit operates in the 550 - 1650kHz band. The kit contains all the electronic components, circuit boards and hardware necessary to complete the project. Printed on the circuit board there is a clear silk-screen diagram of the component positions and shapes. Test points are provided for the execution of setup, regulation and examination of the circuit operation.
The AM Receiver consists of the following sections: Antenna input with bandpass filter RF local oscillator/mixer 3-stage IF amplifier section with AGC control Diode demodulator detector with AGC generator Integrated audio amplifier with tone and volume controls The kit requires an external +15V stabilized power supply.
Ordering code: B2300-K2
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 08/00 Specifications may change without notice
page - 3 -
File LEAFLET B2300
B2300B2300-K3 – 2-WATT AUDIO AMPLIFIER KIT
General:
The AF amplifier consists of the following sections:
This is a 2 Watt Audio (AF) Amplifier in kit form. It is of the latest design and includes both discrete and integrated circuitry. The kit contains all the electronic components, circuit boards and hardware necessary to complete the project. Printed on the circuit board there is a clear silk-screen diagram of the component positions and shapes.
Transistor input buffer amplifier Separate treble and bass tone controls Monolithic audio power amplifier The kit requires an external +15V stabilized power supply.
Ordering code: B2300-K3
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 08/00 Specifications may change without notice
page - 4 -
File LEAFLET B2300
B2300B2300-K4 – FM MICRORECEIVER KIT
General:
The FM Microreceiver following sections:
This is a FM Microreceiver in kit form. The receiver is of the latest design and includes integrated circuitry in all stages and operating in the 88-108 MHz band.
of
the
RF amplifier/local oscillator/mixer, built around an advanced feature IC Varicap tuning and AFC control IF amplifier with AGC control and FM detector, built around another advanced monolithic IC Audio amplifier with tone and volume controls
The microreceiver kit contains all the electronic components, circuit boards and hardware necessary to complete the project. Printed on the circuit board there is a clear silk-screen diagram of the component positions and shapes. Test points are provided for the execution of setup, regulation and examination of the circuit operation.
consists
The MICRORECEIVER KIT requires an external +15V stabilized power supply.
Ordering code: B2300-K4
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 08/00 Specifications may change without notice
page - 5 -
File LEAFLET B2300
B2300B2300-K5 – 1.21.2-WATT AUDIO AMPLIFIER KIT
General: General
The AF amplifier consists of the following sections:
This is a 1.2 Watt Audio (AF) Amplifier in kit form. It is of the latest design and includes both discrete and integrated circuitry. The kit contains all the electronic components, circuit boards and hardware necessary to complete the project. Printed on the circuit board there is a clear silk-screen diagram of the component positions and shapes.
Transistor input buffer amplifier Tone control stage Monolithic audio power amplifier The kit requires an external +15V stabilized power supply.
Ordering code: B2300-K5
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 08/00 Specifications may change without notice
page - 6 -
File LEAFLET B2300
B2300B2300-K6 – STAIRCASE GENERATOR KIT
General:
The staircase generator consists of the following sections:
This is a staircase generator in kit form. The circuit is of the latest design and includes both discrete and integrated circuitry. The kit contains all the electronic components, circuit boards and hardware necessary to complete the project. Printed on the circuit board there is a clear silk-screen diagram of the component positions and shapes.
CMOS oscillator UP – DOWN counter Mixer/output stage The kit requires an external +12V stabilized power supply.
Ordering code: B2300-K6
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 08/00 Specifications may change without notice
page - 7 -
File LEAFLET B2300
B2300B2300-K7 – TRANSISTOR TESTER KIT
General:
The tester consists of the following sections: IC oscillator IC inverter LED indicators
This is a tester for transistors and diodes in kit form, it is of the latest design and includes integrated circuitry. The kit contains all the electronic components, circuit boards and hardware necessary to complete the project. Printed on the circuit board there is a clear silk-screen diagram of the component positions and shapes.
The kit has an on-board 9V battery power supply.
Ordering code: B2300-K7
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 08/00 Specifications may change without notice
page - 8 -
File LEAFLET B2300
B2300B2300-K8 – BLINKER KIT
General:
The blinker sections:
This is a car indicator blinker in kit form. The circuit is of the latest design and includes both discrete and integrated circuitry. The kit contains all the electronic components, circuit boards and hardware necessary to complete the project. Printed on the circuit board there is a clear silk-screen diagram of the component positions and shapes.
consists
of
the
following
IC timer Transistor switch Relay output stage The kit requires an external +12V stabilized power supply.
Ordering code: B2300-K8
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 08/00 Specifications may change without notice
page - 9 -
File LEAFLET B2300
B2300B2300-K9 – GUITAR PREAMPLIFIER KIT
General:
The AF amplifier consists of the following sections:
This is a Guitar Preamplifier in kit form. The circuit is of the latest design and includes integrated components in all sections. The kit contains all the electronic components, circuit boards and hardware necessary to complete the project. Printed on the circuit board there is a clear silk-screen diagram of the component positions and shapes.
Two level input section Input buffer amplifier Three way tone control The kit requires an external +12V stabilized power supply.
Ordering code: B2300-K9
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 08/00 Specifications may change without notice
page - 10 -
File LEAFLET B2300
B2300B2300-K10 – FM TRAMSMITTER 10.7MHz KIT
General: This is a wireless headphone transmitter circuit in kit form. The operation frequency is 10,7MHz. The circuit is of the latest design and includes both discrete and integrated circuitry. The transmitter operates on Frequency Modulation of a carrier at 10,7MHz. Since this is also the Intermediate Frequency (IF) of most common domestic FM receivers, no specific receiver will be required to work with the B4232-K10 transmitter, other than a standard FM receiver. The kit contains all the electronic components, circuit boards and hardware necessary to complete the project.
Printed on the circuit board there is a clear silk-screen diagram of the component positions and shapes. The transmitter consists of the following sections: On-board regulated power supply Input audio preamplifier Voltage controlled oscillator (VCO) Tuned power output stage The kit operates from a 120-240V AC mains supply (Please specify while ordering).
Ordering code: B2300-K10
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 08/00 Specifications may change without notice
page - 11 -
File LEAFLET B2300