LEF1E4~1

Electron

S.R.L.

Design Production & Trading of Educational Equipment

B51B51-B55 COMPUTER HARDWARE TRAINING SYSTEM

ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 02/01 Specifications may change without notice

page - 1 -

file LEAFLET B51

B5100 - UNIVERSAL MICROPROCESSOR TRAINER

Trace (Optional unit B5100T): B5100T 32 x 64 bit trace buffer with internal/external clock, internal/external trigger, pre/center/post trigger with 8K counter, 8 clips supplementary external breakpoint, "trigger" and "level" outputs.

The trainer B5100 is a UNIVERSAL EMULATOR AND EPROM PROGRAMMER suitable for both 8 and 16 bit microprocessors and available for different POD’s.

The basic version includes the Z80, 8031-2 and 68000 microprocessors.

The emulation is completely symbolic.

The unit is a stand-alone serial emulator with EPROM Programmer and consists of a set of equipment conceived to design a microprocessor board, by developing the firmware, performing real-time emulation and programming the final EPROM. The system is based on a PC (not included), where Software is developed, and on the xxPx Emulator to emulate Hardware and program the EPROM. While we suggest to develop Software with "C", any cross-assembler available on the market can be used and a symbol converter can be provided on request when necessary.

Common Technical Characteristics Equipped with a 128K x 16 RAM of internal emulation mappable with 8K block resolution for all microprocessors that address more than 64K. When it is used with an 8 bit microprocessor, the RAM is mapped accordingly. Complete with 8 hardware breakpoints for realtime emulation with the clock settable to internal or external.

Banking: 16 Banks of 64K for 8 bit processors, 256 Banks of 64K for 16 bit processors.

User Interface One of the most important aspects of the Emulator Software is the C Debugger which allows debugging of any C source developed by the user.

Management of the breakpoints can be performed directly on the lines of the C program and by means of the special "Watch" it is possible to monitor any symbol in "real time".

This Software is customized for each family of microprocessors according to the different technical characteristics, and it enables the serial dialogue between the Emulator and any MS-DOS/WINDOWS 3.X/WINDOWS 95 computer.

ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 02/01 Specifications may change without notice

page - 2 -

file LEAFLET B51

Product Information

The microprocessor emulation is performed without using micro resources: in fact the emulator contains 2 microprocessors, one manages the monitor , the EPROM programmer and the Slave microprocessor, the other one is the emulation Slave micro.

The Universal Emulator is composed of two separate parts: the Emulator and the EPROM Programmer.

It contains 5 Boards: - the Monitor and EPROM Programmer Board - the Universal 8-16 bit Slave Board - the Universal 8-16 bit Base Board - the Emulation POD containing the microprocessor for real-time and maximum speed emulation - a Board containing EPROM programmer textools, the ON/OFF and reset Switch and the ON and Program Leds.

- a Real-Time-Trace Board, including external buffer carrying clips (is available optional) The Emulator works on the Serial Port of any IBM-PC, AT or compatible in a full stand-alone mode at a 28,8K (115,2K) baud rate.

The emulation is performed in real-time and at the maximum speed allowed by the microprocessor. For this reason the emulation microprocessor is located on an external POD with a probe close to the target (only a few centimeters).

Moreover, all microprocessor signals exit directly on probe without intermediate buffers.

By replacing only the POD Board and the corresponding EPROM (on the Monitor Board) it is possible to emulate many supported micros: this is why it is called "universal".

Standard Available POD's: Z80 68000

8031-2

Photo of Pod 68000

ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 02/01 Specifications may change without notice

page - 3 -

file LEAFLET B51

B5110 – MICROPROCESSOR MICROPROCESSOR TRAINING SYSTEM

Photo of the trainer complete with optional modules and optional PC

General: The B5110 system consists of a set of modules providing a means of studying microprocessor technology from the basic programming to the most complex applications, such as industrial automation control , robotics, etc.. The system can be used as a general-purpose development tool for microprocessor-based applications.

The trainer is based on a microprocessor family of widespread use, the 80C51 (which includes the 80C31, 80C51, 80C71) presently manufactured by INTEL, PHILIPS, OKI etc. The system is also compatible with single-chip microprocessors such as the 80C552, 87C751 and others.

System Characteristics: The system consists of the following items: B5110--A – PERSONAL COMPUTER. B5110 IBM compatible, of the PENTIUM class, with a standard configuration of 64 Mb RAM, Keyboard, Mouse, SVGA monitor, 4 Gb HD, 3.5” FD, Printer.

The above is standard and can be supplied

by ELECTRON or alternatively use may be made of a PC machine already in possession of the educational institution.

B5110--B – UNIVERSAL MICROCOMPUTER B5110 BOARD AND DEVELOPMENT SYSTEM SOFTWARE PACKAGE. This allows the writing of applications in Assembly Symbolic Language and the easy testing and debugging of the programs created.

This software package allows the downloading of object files in HEX format to the System under development or to the EPROM programmer.

These files can also be uploaded from the System under development in the same format for disassembly and the reconstruction of the Source Listing file.

The software package can optionally be provided with the facilities to write programs in the “C” language and convert them into Assembly Source Listings.

The Microcomputer board contains the CPU, memory, I/O interface, RS 232 serial link with the support PC (B5110-A) This board provides ready-to-use universal hardware allowing the implementation an immediately working system. The user can therefore focus on program development.

Additional boards of this type can be provided with the trainer as separate items.

ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 02/01 Specifications may change without notice

page - 4 -

file LEAFLET B51

B5110--C – EPROM/EEPROM PROGRAMB5110 PROGRAMMODULE MING MODULE. B5110--D – ULTRA ULTRA--VIOLET EPROM ERASER. B5110 ERASER B5110--E – DIGITAL APPLICATIONS B5110 MODULES KIT This consists of a set of boards containing specific hardware (digital) to be interfaced to the microcomputer board B5110-B to perform the experiments. These include: 8-input board with optoisolators and simulating switches 8-output board with microrelays and LEDs 2-digit 7-segment display keyboard and buzzer DC motor control Optional Adapter board to connect all simulators of the B3729 series (PLC trainer). This greatly extends the range of use of the B5110 trainer.

Note that the B3729 simulators include items ranging from a Traffic Lights, an Elevator, a Conveyor Belt, etc. Please see the description of the B3729 series for full details.

The list of Applicable Modules provided with the trainer can be expanded/modified to fulfill the customer’s requirements.

B5110--F – ANALOG APPLICATIONS B5110 MODULE KIT This consists of a set of boards containing analog hardware to be interfaced to the microcomputer board B5110B to perform analog experiments.

A/D and D/A converters are included B5110B5110-G – POWER SUPPLY MODULE, delivering the voltages required to operate the system.

The B5110 trainer is delivered with accessory kit (connection cables) and extensive instructions manual. This covers both the introductory subjects on microprocessors as well as guided experiments and programming examples.

Ordering code: B5110

ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 02/01 Specifications may change without notice

page - 5 -

file LEAFLET B51

B5140 – PC MAINTENANCE TRAINER

The trainer consists of an updated Personal Computer of the Pentium class, transformed in a trainer suitable for use in hands-on laboratory courses for computer maintenance.

The trainer fully displays the electronics of the system, made accessible for the execution of the experiments, and includes plastic transparent covers to protect the equipment when the trainer is not in use.

The trainer is provided with a fault simulation system usable to train students in trouble-shooting techniques, as well as to enhance their understanding of system operation.

12 different fault situations are provided.

The programmable faults cover all subassemblies/sections of the system and are conceived to train students to locate

faults by precisely following a logical guideline from symptom to the possible cause of misoperation.

The faults are programmed by operating keys which are concealable by a cover.

The trainer can be used as a demonstration unit too.

A summary of the technical characteristics of the system is as follows: -

CPU PENTIUM class.

VGA colour monitor, 15" diagonal.

256 Mbytes RAM. 1 Floppy disk drive 1 Hard disk, 40 Gbytes.

1 Keyboard.

1 Mouse 1 Parallel port 1 Serial ports RS232C. 1 CD (ROM) drive 4 USB ports

Ordering code: B5140

ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 05/03 Specifications may change without notice

page - 6 -

file LEAFLET B51

B5145 – LASER PRINTER MAINTENANCE MODULE

The trainer can be regarded as an appendix to the B5140 – PC MAINTENANCE TRAINER. This item consists in an industrial apparatus transformed for the requirements of training.

The original equipment cabinet is added with a rugged synoptic board with clear silkscreen printing of the system block diagram.

The electronics of the unit is made accessible for test and measurements through 18 test points, selected to provide a clear understanding of the system operation.

Since laser printers internally generate Very High Voltages, special care has been taken to ensure safe use of the trainer: all test points carry low-voltage, hazard-free signals and high-voltage parts are insulated and shielded so as to prevent accidental contact.

A fault simulation system is provided, for 12 different fault situations. The faults are inserted by means of microswitches, concealed from the student but accessible to the instructor.

The trainer is supplied with accessories and instruction manual and with an initial supply of consumable items.

Ordering Code: B5145

DUE TO CONTINUOUS UPGRADING OF THE ORIGINAL EQUIPMENT, THE PHYSICAL APPEARANCE OF THE FRONT PANEL OF THIS TRAINE TRAINER R MAY CHANGE. THIS MAKES NO DIFFERENCE IN THE EDUCATIONAL QUALITY OF THE TRAINER ITSELF.

ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 05/03 Specifications may change without notice

page - 7 -

file LEAFLET B51

B5520 – A/D AND D/A CONVERTER TRAINER

The B5520 trainer is one component of the B55 series, whose aim is to study and experiment specific subjects of Electronics of special interest in the Industrial field.

The B5520 is dedicated to the A/D and D/A converters and allows the following major study subjects: Techniques for A/D and D/A conversion Signal interface circuit structures Performance of A/D and D/A converters Techniques for computer control of A/D and D/A devices Architecture of a PC-based industrial control system

The trainer should be normally used in conjunction with a PC of the PENTIUM class, at the aid of a software package provided with the trainer, however use of the trainer as a stand-alone unit (without PC) is possible. The software package runs under WIN 95/98/NT. The B5520 includes a power supply from AC mains (115 – 240 VAC, 50 – 60 Hz) ORDERING CODE: B5520

CASCINA TORCHIO II-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 ELECTRON S.R.L. VIA CASCINA Rev 04/03 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Specifications may change without notice

page - 8 -

File B5520