X12 TL GW & X14 TL GW

TO BE MOUNTED BY A SALOMON AUTHORIZED DEALER ONLY.

BINDINGS INTENDED TO BE USED ONLY WITH ALPINE BOOTS COMPLIANT WITH ISO 5355 STANDARD AND SKI BOOTS EQUIPPED WITH « GRIPWALK » LABELLED KIT OF WALKING SOLES

✖ ✖

ISO 5355 WTR ISO 9523

WARNING

THESE ALPINE BINDINGS ARE INTENDED TO BE USED ONLY WITH THE FOLLOWING SKI BOOTS:

> Alpine ski boots compliant with ISO 5355 standard. > Ski boots equipped with « GripWalk » labelled kit of walking soles WITHOUT metal inserts

Any use with other ski boots could cause the ski-binding-boot system to be faulty and affect release characteristics, which would increase the risk of serious injury while skiing. Therefore, skiers are warned not to use this product with any ski boots other than those meeting the standards indicated above. Skiers are advised to consult the dealer where this product was purchased, or an equipment specialist at any SALOMON authorized ski dealer of this product, for further information regarding which ski boots meet the standards listed above.

SOLE LENGTH ADJUSTMENT

260mm – 360mm

ALPINE SKI BOOTS (ISO 5355)

TYPE A (Adult)

TYPE C (Children)

GRIPWALK BOOTS (ISO 9523) NO NORM SKI BOOTS

GRIPWALK COMPATIBILITY EXCLUSION WARNING

OLD GRIPWALK DESIGN - VERSION 1 NO GAP BETWEEN CURRENT GRIPWALK DESIGN - VERSION 2

TO BE COMPATIBLE WITH GRIPWALK BOOTS, THE CENTRAL LEVER OF THE PLATE MUST BE MARKED WITH THE GRIPWALK LOGO.

COMPATIBILITY IS NOT POSSIBLE.

WITHOUT THIS LOGO ON THE LEVER, FRICTION AREA AND CRAMPON

1. Open the central lever. 2. Insert the toe piece and position on the track according to the boot sole length. 3. Insert the heel piece and position it on the track according to the boot sole.

MOUNTING & ADJUSTING

4. When the binding is adjusted to the sole length, locked the central lever,

and check that the lever is completely closed. 5. Select and adjust the setting release values for toe and heel pieces.

Step-in the boot, check and adjust the forward pressure.

#3 MNC (MULTI-NORM CERTIFIED) BINDINGS ARE INTENDED TO BE USED WITH FOLLOWING SKI BOOTS:

ALPINE BOOTS COMPLIANT WITH ISO 5355 STANDARD TOURING BOOTS COMPLIANT WITH ISO 9523 STANDARD SKI BOOTS EQUIPPED WITH “WTR TECHNOLOGY” PADS OR WITH “GRIPWALK” PADS

ISO 5355 WTR

ISO 9523

WARDEN MNC 11 DEMO BINDING ........... WARDEN MNC 11 BINDING............... WARDEN MNC 13 DEMO BINDING ........... WARDEN MNC 13 BINDING .............. GUARDIAN MNC BINDING - BACKCOUNTRY...... S LAB SHIFT MNC 10 & 13 BINDING ..........

72 74 76 78 80 84

WARNING

THESE ALPINE BINDINGS ARE INTENDED TO BE USED ONLY WITH THE FOLLOWING SKI BOOTS:

> Alpine ski boots compliant with ISO 5355 standard. > Touring boots compliant with ISO 9523 standard > Ski boots equipped with “WTR technology” pads or with “GRIPWALK” pads

Any use with other ski boots could cause the ski-binding-boot system to be faulty and affect release characteristics, which would increase the risk of serious injury while skiing. Therefore, skiers are warned not to use this product with any ski boots other than those meeting the standards indicated above. Skiers are advised to consult the dealer where this product was purchased, or an equipment specialist at any SALOMON authorized ski dealer of this product, for further information regarding which ski boots meet the standards listed above.