MODEL - SPECIFIC INSTRUCTIONS
X12 TL GW & X14 TL GW TO BE MOUNTED BY A SALOMON AUTHORIZED DEALER ONLY.
BINDINGS INTENDED TO BE USED ONLY WITH ALPINE BOOTS COMPLIANT WITH ISO 5355 STANDARD AND SKI BOOTS EQUIPPED WITH « GRIPWALK » LABELLED KIT OF WALKING SOLES
✖ ISO 5355
✖
WTR
ISO 9523
WARNING
Any use with other ski boots could cause the ski-binding-boot system to be faulty and affect release characteristics, which would increase the risk of serious injury while skiing. Therefore, skiers are warned not to use this product with any ski boots other than those meeting the standards indicated above. Skiers are advised to consult the dealer where this product was purchased, or an equipment specialist at any SALOMON authorized ski dealer of this product, for further information regarding which ski boots meet the standards listed above. 260mm – 360mm
WARNING
TO BE COMPATIBLE WITH GRIPWALK BOOTS, THE CENTRAL LEVER OF THE PLATE MUST BE MARKED WITH THE GRIPWALK LOGO. WITHOUT THIS LOGO ON THE LEVER, COMPATIBILITY IS NOT POSSIBLE.
TYPE A (Adult)
TYPE C (Children)
●
✖
GRIPWALK BOOTS (ISO 9523)
NO NORM SKI BOOTS
●
✖
GRIPWALK COMPATIBILITY EXCLUSION OLD GRIPWALK DESIGN - VERSION 1
CURRENT GRIPWALK DESIGN - VERSION 2
NO GAP BETWEEN FRICTION AREA AND CRAMPON
NO COMPATIBILITY of K2 BFC boot with GripWalk outsole Version 1 summary <<<
BINDING
SOLE LENGTH ADJUSTMENT
ALPINE SKI BOOTS (ISO 5355)
TECHNICAL MANUAL ALPINE 2020/21
THESE ALPINE BINDINGS ARE INTENDED TO BE USED ONLY WITH THE FOLLOWING SKI BOOTS: > Alpine ski boots compliant with ISO 5355 standard. > Ski boots equipped with « GripWalk » labelled kit of walking soles WITHOUT metal inserts
OK COMPATIBILITY of K2 BFC boot with Gripwalk outsole version 2
69
