1 minute read

X12 TL & X14 TL BINDING

TO BE MOUNTED BY A SALOMON AUTHORIZED DEALER ONLY.

WARNING : BINDINGS INTENDED TO BE USED ONLY WITH ALPINE BOOTS COMPLIANT TO ISO 5355 STANDARD

Advertisement

ISO 5355

WTR ISO 9523

Any use with other ski boots could cause the ski-binding-boot system to be faulty and affect release characteristics, which would increase the risk of serious injury while skiing. Therefore, skiers are warned not to use this product with any ski boots other than those meeting the standards indicated above. Skiers are advised to consult the dealer where this product was purchased, or an equipment specialist at any SALOMON authorized ski dealer of this product, for further information regarding which ski boots meet the standards listed above.

MOUNTING & ADJUSTING

SOLE LENGTH ADJUSTMENT

Open the central lever (fig. 1).

Insert the toe piece and position on the track according to the boot sole length (fig. 2).

Insert the heel piece and position on the track according to the boot sole (fig. 3).

When the binding is adjusted to the sole length, locked the central lever (fig. 4).

Select and adjust the setting release values for toe and heel pieces. Step-in the boot, check and adjust the forward pressure 260mm – 360mm

(fig. 5).

1

3

2

4

5

Adjust spindle only when boot is out of the binding

This article is from: