MODEL - SPECIFIC INSTRUCTIONS
X12 TL & X14 TL BINDING TO BE MOUNTED BY A SALOMON AUTHORIZED DEALER ONLY.
WARNING : BINDINGS INTENDED TO BE USED ONLY WITH ALPINE BOOTS COMPLIANT TO ISO 5355 STANDARD
✖
✖
WTR
ISO 5355
✖
ISO 9523
Any use with other ski boots could cause the ski-binding-boot system to be faulty and affect release characteristics, which would increase the risk of serious injury while skiing. Therefore, skiers are warned not to use this product with any ski boots other than those meeting the standards indicated above. Skiers are advised to consult the dealer where this product was purchased, or an equipment specialist at any SALOMON authorized ski dealer of this product, for further information regarding which ski boots meet the standards listed above. 260mm – 360mm
SOLE LENGTH ADJUSTMENT
MOUNTING & ADJUSTING Open the central lever (fig. 1).
1
2
3
4
Insert the toe piece and position on the track according to the boot sole length (fig. 2).
When the binding is adjusted to the sole length, locked the central lever (fig. 4). Select and adjust the setting release values for toe and heel pieces. Step-in the boot, check and adjust the forward pressure (fig. 5).
Adjust spindle only when boot is out of the binding
BINDING
5
TECHNICAL MANUAL ALPINE 2020/21
Insert the heel piece and position on the track according to the boot sole (fig. 3).
33 summary <<<