Salonserve Spa Chair Pre Install Notes

Salonserve Spa chair Where the secret of elegance is simplicity

Pre窶的nstall Notes Simple to install Simple to use Simple to maintain

Salonserve Tel: 01933 410022 Fax: 01933 410033 Email: info@salonserve.com Page Web: www.salonserve.com Address: Unit 9, Higham Business Park Bury Close Higham Ferrers, Northants NN10 8HR

Introduction The Salonserve Spa Chair had been designed to be simple to install, use and maintain.

The purpose of this pre-install leaflet is to clearly explain the requirements of the Salonserve Spa Chair and to help you plan the installation.

The Salonserve Spa chair can be installed by a competent handyman. You may be using are the services of a competent plumber. Pease ask everybody concerned with the installation to read and understand this guide. If you or they have any questions about the Salonserve Spa chair please call us on 01933 410022.

Please plan your installation with consideration to the following‌‌..

Delivery This Salonserve Spa Chair comes in two boxes.

Box 1. Spa part 155 x 66 x51 cm, weight approx 56KG. Box 2. Chair (Seat and back) 95 x 76 x 55 cm, weight approx 45KG Please consider...Will the boxes fit through any doors? Should you have extra help to move the boxes when they are delivered?

Space Requirements Please consider the location of the Salonserve Spa Chair. Please consider the area around the Salonserve Spa chair to allow the therapist to work in comfort. Also consider any space that may be required for servicing any plumbing items. If space is tight the Salonserve Spa chair can be aligned closely to a wall either on the right or left of the unit.

(The arms of the chair swing up allowing easy access for the client.)

Please provide enough space around your Salonserve Spa chair for the therapist to work in comfort and easy access for your client. These are the suggested minimums.

1.2 m

1.7 m

Page 2

Physical Sizes 77 + 22 for each tray extended All cm.

Seat 45

80

155

66

Electrical Requirements The Salonserve Spa chair has been designed to use the minimum amount of electricity to function. The Salonserve Spa chair requires two (2) normal 13 amp fused sockets only. These should be fitted with a suitable RCD (residual current device). An RCD is a device for your protection that disconnects the power supply quickly in special circumstances.

Plumbing Requirements The Salonserve Spa Chair requires hot and cold water in, and a drain out. The Salonserve Spa chair is supplied with two flexible connectors for the hot and cold water. These connectors accept a standard 15mm plastic or copper pipe. The Hot and Cold water should be at mains pressure. (approximately 30 to 80 psi). If this is not available pumps can be easily installed. Please call for free advice and details.

The drain is a standard 40mm compression fixing. The drain is by gravity. If you require a pumped drain please call us for free advice specific to your installation.

Cont‌..

Page 3

Please check that your hot water system can produce enough hot water. Each filling take about 15 litres of warm water.

Simple Assembly Instructions for when your Spa Chair arrives 1.

Position the base spa part in location

2.

Attach the seat of the chair with the 4 nuts and bolts provided.

3.

Locate and secure the chair back.

4.

Connect the three coded cables. (e.g. AA to AA)

5.

Connect the hot, cold and drain pipes with the provided adaptors.

6.

Plug in, switch on and use

Fuller instructions are provided with your Salonserve Spa chair.

If you Rear view of Salonserve Spa chair PLEASE NOTE Only one water pipe is shown for clarity Hot water in Cold water in

Drain out

Page 4

Specifications Model

Salonserve Spa Chair SPA905

Operating Temperature

4°C to 38°C (40°F to 100°F)

Water Pressure

30 to 80 psi (mains pressure)

Max hot water temperature

65°C (150°F)

Max Tub water capacity

14 liters (approx)

Tub Construction

ABS with Colour impregnated Gel Coating

Power Supply Frequency

50/60Hz

Voltage

230/240 VAC

Spa Tub

100 watts

Massaging Chair, typical

38 watts

Massaging Chair, maximum

100 watts

Due to our continual development program the Salonserve Spa chair shown may differ slightly from currently available versions. Please keep these instructions .

Page 5

All rights reserved. Š Salonserve 2006, 2007, 2008, 2009, 2010 Specification and colours subject to change without notice. E&EO. Salonserve Unit 9, Higham Business Park Bury Close Higham Ferrers, Northants NN10 8HR

Page 6