Scope of Work Project Voyager Crestron Programming System Overview Equipment The Crestron control system will be assembled using the following components. The cabinets will be vented and Active Thermal cooling systems used to ensure adequate cooling for all electronic components. Crestron PRO2 Control System Processor Crestron C2ENET-2 Dual Port Ethernet Card for PRO2 Crestron CNXTA WAV Player Card Option for PRO2 Crestron CNX-BIPAD8A Audio Distribution Processor Crestron CNX-PVID8X4 Video Distribution Crestron CNX-PBVR4 Video Receiver 6 ea Crestron CNXRMCLV Room Solution Box 2 ea Crestron CNRFGWA-418 1-Way RF Gateway 418 MHz 2 ea Crestron TPS-RFGWX 2-Way RF Gateway 2.4 GHz 2 ea Crestron C2NHBLOCK Cresnet Connecting Blocks MPJA 24V Power Supply The MPJA 24V power supply will be used to provide Cresnet power. The power supply will connect to (2) Cresnet connection blocks (HBLOCK in daisy chain configuration.) C2NHBLOCK #1
Power (W)
C2NHBLOCK #2
Power (W)
PAD8A Audio Processor
6
C2N-TXM Receiver
8
RFGWA Gateway
3
CNAMPX12X60 Amplifier
3
TPS-3000 (kitchen)
22
C2N-MNETGW Gateway
3
C2N-FT-TPS4 (bedrm)
13
TPS-4000L (kiosk)
22
CNXBF12 (outdoor)
3
TOTAL
44
CNCS Current Sensor
3
CHVTHSTAT Thermostat
2
TOTAL
44
Control Ports and Equipment IR Port
Controlled device
Relay
Controlled device
Serial Port
A
SAT/DVR #1
1
Main Salon Lift Up/Dn
A
B
SAT/DVR #2
2
Navigation Alarm
B
C
SAT/DVR #3
3
Pilot House Alarm
C
D
4
Bridge Deck Alarm
D
E
5
E
F
6
F
G
7
H
8
Globally Available Sources DirecTV DVR10-250 Sat#1 [BIPAD input 1, PVID input 1] DirecTV DVR10-250 Sat#2 [BIPAD input 2, PVID input 2] DirecTV DVR10-250 Sat#3 [BIPAD input 3, PVID input 3] Voyager Camera (Forward) [PVID input 4] Voyager Camera (Engine Room) [PVID input 5], through Pilot House RMCLV Voyager Camera (Stern) [PVID input 6], through Pilot House RMCLV Navigation System [PVID input 14] Sony DVP-NC80V (Main Salon) [BIPAD input 1, PVID input 13] CEN-IPOD iPod Interface [BIPAD input 1] Flexvision DVD (Master Stateroom) [BIPAD input 3, PVID input 15] Flexvision DVD (Forward VIP Stateroom) [BIPAD input 4, PVID input 16]
Controlled device
Main Salon Globally Available Sources Sony DVP-NC80V (Main Salon) [BIPAD input 1, PVID input 13] CEN-IPOD iPod Interface [BIPAD input 1] Local Equipment Sole 30” LCD (Show & Tell feed Component (vid4) Sony STR-DE995 Sony DVP-NC80V [Available globally] Crestron CEN-IPOD [Available globally] Crestron RMCLV Crestron TPS-RFGWX Source
RMCLV video input
Named Rcvr Input
*Receiver YPbPr In
*Receiver Audio In
Video 4
“TV”
None
None (Analog)
DVD
Video 5
“DVD”
1-RCA
1-Coax
Cable/PVR
Video 5
“DBS”
3-RCA
3-Coax
Escient E2
Video 5
“VDP”
2-RCA
2-Coax
iPOD
None
“VCR1”
None
None (Analog)
XM
None
“CD-R”
None
None (Analog)
Crestron Controller STX-1700CXP Macros • Watch Show & Tell ◦ Power on TV (if not already on per CNCS) ◦ Select TV’s ‘Vid 4’ Component Video Input to see Show & Tell HD Video ◦ Switch this zone on the PAD8 to the Show & Tell Audio Input #3 and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Flip to “You are watching Tweeter High Definition Video” Page • Listen to XM Radio
◦ Leave TV On if already On and switched to the video source last selected ◦ Switch this zone on the PAD8 to Input 1, XM Tuner Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Flip Touchpanel to the main XM Tuner Control Page (use the template as-is for these pages). • Listen to Escient Audio Server ◦ Leave TV On if already On and switched to the video source last selected ◦ Switch this zone on the PAD8 to Input 2, Escient Audio Server Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Flip Touchpanel to the main Escient Control Page (use Escient’s template for these pages) • Listen to iPod ◦ Leave TV On if already On and switched to the video source last selected ◦ Switch this zone on the PAD8 to Input 4, the iPod Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Begin iPod playing ◦ Flip Touchpanel to iPod Control Page (use Crestron’s template)
Pilot House Globally Available Sources Voyager Camera (Engine Room) [PVID input 5], through Pilot House RMCLV Voyager Camera (Stern) [PVID input 6], through Pilot House RMCLV Navigation System [PVID input 14] Equipment Raymarine E-120 Navigation System (Composite video through StarTech VGA2NTSCPRO) JL Audio e2150M amplifier Crestron RMCLV Pilot House Connections Source
RMCLV input
RMCLV Output
TV input
*Receiver Audio In
Raymarine E-120
Video 8
“TV”
Video 1
None (Analog)
Engine Rm Camera
Video 5
“DVD”
Video 1
1-Coax
Stern Camera
Video 6
“DBS”
Video 1
3-Coax
*These inputs are configurable in the Receiver Set-Up menu. Crestron Controller TPS-4L touchpanel Macros • Watch Show & Tell ◦ Power On TV (if not already on per CNCS) ◦ Select TV’s ‘Vid 4’ Component Video Input ◦ Power On Receiver ◦ Select Receiver’s ‘TV’ Input ◦ Flip to “You are watching Tweeter High Definition Video” Page • Watch DVD ◦ Power On TV (if not already on per CNCS) ◦ Select TV’s ‘Vid 5’ Component Video Input ◦ Power On Receiver ◦ Select Receiver’s ‘DVD’ Input ◦ Flip Touchpanel to DVD Transport Control Page • Watch HD Cable ◦ Power On TV (if not already on per CNCS) ◦ Select TV’s ‘Vid 5’ Component Video Input ◦ Power On Receiver ◦ Select Receiver’s ‘DBS’ Input ◦ Flip Touchpanel to HD Cable Control Page (Menu, Joystick, etc.) • Listen to XM Radio ◦ Leave TV On if already On and switched to the video source last selected ◦ Switch this zone on the PAD8 to Input 1, XM Tuner Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Flip Touchpanel to the main XM Tuner Control Page (use a Crestron Template if exists for this panel – all that is required here are a few of the most popular station presets since this is a 1-way panel). • Listen to Escient Audio Server ◦ Power on TV (if not already on per CNCS) ◦ Select TV’s ‘Vid 5’ Component Video Input ◦ Power On Receiver
◦ Select Receiver’s ‘VDP’ Input ◦ Flip Touchpanel to the Escient Primary Control Page (use Escient’s template) • Listen to IPod ◦ Leave TV On if already On and switched to the video source last selected ◦ Select Receiver’s ‘VCR1’ Input ◦ Begin iPod playing ◦ Flip Touchpanel to iPod Control Page (use Crestron’s template)
Master Stateroom Globally Available Sources DirecTV DVR10-250 Sat#1 [BIPAD input 1, PVID input 1] DirecTV DVR10-250 Sat#2 [BIPAD input 2, PVID input 2] DirecTV DVR10-250 Sat#3 [BIPAD input 3, PVID input 3] Voyager Camera (Forward) [PVID input 4] Flexvision DVD (Master Stateroom) [BIPAD input 3, PVID input 15] Equipment Sole 20” LCD JL Audio e2150M amplifier Crestron RMCLV Crestron CNRFGWA-418 Crestron Controller FT-TPS4L touchpanel ML-600 handheld remote Macros • Watch Show & Tell ◦ Pop-up TV on Laurier Lift, if not already up ◦ Power on TV (if not already on per CNCS) ◦ Select TV’s Component 1 Video Input to see Show & Tell HD Video ◦ Switch this zone on the PAD8 to input 3, the Show & Tell Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Flip to “You are watching Tweeter High Definition Video” Page • Listen to XM Radio ◦ Turn-Off TV and Lower the Lift if it is already up and on. ◦ Switch this zone on the PAD8 to input 1, the XM Tuner Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting)
◦ Flip Touchpanel to the main XM Tuner Control Page (use Crestron’s template) • Listen to Escient Audio Server ◦ Turn-Off TV and Lower the Lift if it is already up and on. ◦ Switch this zone on the PAD8 to input 2, the Escient Audio Server Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Flip Touchpanel to the main Escient Control Page (use Escient’s template) • Listen to iPod ◦ Turn-Off TV and Lower the Lift if it is already up and on. ◦ Switch this zone on the PAD8 to input 4, the iPod Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Begin iPod playing ◦ Flip Touchpanel to iPod Control Page (use Crestron’s template)
Forward VIP Stateroom Globally Available Sources Flexvision DVD (Forward VIP Stateroom) [BIPAD input 4, PVID input 16] Description • This is an Audio Zone of the PAD8/CNAMP to demo global audio sources • MTI buttons are used to select from up to 8 sets of speakers manually. • All Macros should be duplicated on BF12 Keypad and WPR48 Remote. • Keypad buttons need to be organized and labeled properly. • WPR48 needs to be organized properly and labeled properly. • WPR48 should be mounted in this space on its’ charger so that is easily usable, however, not easy to steal. Equipment Sole 15” LCD JL Audio e2150M amplifier Crestron RMCLV Crestron Controllers FT-TPS4L touchpanel ML-600 handheld remote Macros • Listen to XM Radio
◦ Switch this zone on the PAD8 to input 1, the XM Tuner Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Stay on current channel at first and make Presets or Preset Skip buttons available • Listen to Escient Audio Server ◦ Switch this zone on the PAD8 to input 2, the Escient Audio Server Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Begin playing and Make Skip buttons available • Listen to Show and Tell ◦ Switch this zone on the PAD8 to input 3, the Show & Tell Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) • Listen to iPod ◦ Switch this zone on the PAD8 to input 4, the iPod Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Begin iPod playing and make track skip buttons available
Portside Bunkroom Globally Available Sources None Equipment 2 ea Audiovox FPE1080 LCD Crestron RMCLV Niles AVDA-3 AV splitter Crestron Controller TPS-4L touchpanel Macros • Watch Show & Tell ◦ Pop-up TV on Laurier Lift, if not already up ◦ Power on TV (if not already on per CNCS) ◦ Select TV’s Component 1 Video Input to see Show & Tell HD Video ◦ Switch this zone on the PAD8 to input 3, the Show & Tell Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Flip to “You are watching Tweeter High Definition Video” Page
• Listen to XM Radio ◦ Turn-Off TV and Lower the Lift if it is already up and on. ◦ Switch this zone on the PAD8 to input 1, the XM Tuner Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Flip Touchpanel to the main XM Tuner Control Page (use Crestron’s template) • Listen to Escient Audio Server ◦ Turn-Off TV and Lower the Lift if it is already up and on. ◦ Switch this zone on the PAD8 to input 2, the Escient Audio Server Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Flip Touchpanel to the main Escient Control Page (use Escient’s template) • Listen to iPod ◦ Turn-Off TV and Lower the Lift if it is already up and on. ◦ Switch this zone on the PAD8 to input 4, the iPod Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Begin iPod playing ◦ Flip Touchpanel to iPod Control Page (use Crestron’s template)
Bridge Deck Globally Available Sources None Equipment 2 ea Clarion OHM153 flip down LCD 3 ea JL Audio e2150M amplifier Crestron RMCLV Crestron TPS-RFGWX Crestron CNRFGWA-418 Niles AVDA-3 AV splitter Crestron Controller STX-1700CXP wireless touchpanel WPR-48 handheld remote Macros • Watch Show & Tell ◦ Pop-up TV on Laurier Lift, if not already up ◦ Power on TV (if not already on per CNCS)
◦ Select TV’s Component 1 Video Input to see Show & Tell HD Video ◦ Switch this zone on the PAD8 to input 3, the Show & Tell Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Flip to “You are watching Tweeter High Definition Video” Page • Listen to XM Radio ◦ Turn-Off TV and Lower the Lift if it is already up and on. ◦ Switch this zone on the PAD8 to input 1, the XM Tuner Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Flip Touchpanel to the main XM Tuner Control Page (use Crestron’s template) • Listen to Escient Audio Server ◦ Turn-Off TV and Lower the Lift if it is already up and on. ◦ Switch this zone on the PAD8 to input 2, the Escient Audio Server Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Flip Touchpanel to the main Escient Control Page (use Escient’s template) • Listen to iPod ◦ Turn-Off TV and Lower the Lift if it is already up and on. ◦ Switch this zone on the PAD8 to input 4, the iPod Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Begin iPod playing ◦ Flip Touchpanel to iPod Control Page (use Crestron’s template)
Aft Main Deck Globally Available Sources DirecTV DVR10-250 Sat#1 [BIPAD input 1, PVID input 1] DirecTV DVR10-250 Sat#2 [BIPAD input 2, PVID input 2] DirecTV DVR10-250 Sat#3 [BIPAD input 3, PVID input 3] Voyager Camera (Forward) [PVID input 4] Voyager Camera (Engine Room) [PVID input 5], through Pilot House RMCLV Voyager Camera (Stern) [PVID input 6], through Pilot House RMCLV Navigation System [PVID input 14] Sony DVP-NC80V (Main Salon) [BIPAD input 1, PVID input 13] CEN-IPOD iPod Interface [BIPAD input 1] Flexvision DVD (Master Stateroom) [BIPAD input 3, PVID input 15] Flexvision DVD (Forward VIP Stateroom) [BIPAD input 4, PVID input 16] Equipment 1 ea Clarion OHM156 flip down LCD
JL Audio e2150M amplifier Crestron Controller WPR-48 handheld remote Macros • Watch Show & Tell ◦ Pop-up TV on Laurier Lift, if not already up ◦ Power on TV (if not already on per CNCS) ◦ Select TV’s Component 1 Video Input to see Show & Tell HD Video ◦ Switch this zone on the PAD8 to input 3, the Show & Tell Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Flip to “You are watching Tweeter High Definition Video” Page • Listen to XM Radio ◦ Turn-Off TV and Lower the Lift if it is already up and on. ◦ Switch this zone on the PAD8 to input 1, the XM Tuner Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Flip Touchpanel to the main XM Tuner Control Page (use Crestron’s template) • Listen to Escient Audio Server ◦ Turn-Off TV and Lower the Lift if it is already up and on. ◦ Switch this zone on the PAD8 to input 2, the Escient Audio Server Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Flip Touchpanel to the main Escient Control Page (use Escient’s template) • Listen to iPod ◦ Turn-Off TV and Lower the Lift if it is already up and on. ◦ Switch this zone on the PAD8 to input 4, the iPod Audio Input, and set this zone to its’ start-up volume if not already on (if the zone is already on and active, leave it at the current volume setting) ◦ Begin iPod playing ◦ Flip Touchpanel to iPod Control Page (use Crestron’s template)
Take Control Kiosk Programming Overview • Global ‘Party’ Control ◦ Select room(s) turns on the rooms and plays the selected source (Family Room excluded) ◦ Select source: IPOD, Escient Fireball, XM Radio may be selected.
•
• • • •
◦ Source Controls: Page will be displayed upon selection of source ◦ Preset volume: soft, medium, loud. Individual rooms may be adjusted using their controls. ◦ Party off control turns off all rooms in the party setting. Control of Notional Space Rooms ◦ Audio source selection. Turns on the room and plays the selected source ◦ Lighting Controls: All room scenes can be set. Dim up/down controls. ◦ No transport controls for local room sources (family room DVD, etc.) All lighting controls page. Control of thermostat. View Camera Floorplan CAD view from Brandon of the rooms on the panel to show A/V status and lighting status.
System is to be fully operational, per the above specifications, by opening date. ### ©2006 Tweeter Home Entertainment Group, Inc.
Page 1 of 8