SEANIC OCEAN SYSTEMS D I G ITA L C ATA LO G / S P R I N G 2017
A C E NT U R I O N C O M PA NY
SEANIC OCEAN SYSTEMS Tom Ayars President
A
s we near the mid-year point, it’s clear the
In our last issue, we announced that Seanic and sister
market will likely not provide the level of recovery
company UES of Aberdeen had joined forces. Now that
everyone hoped for in 2017. With oil below $50
UES is stocking Seanic ROV tooling for both rental and
(bbl/WTI) again, operators will be very selective on which
sale, UES can provide service to the diving, ROV, and
projects they fund and the focus will remain on cost-
decommissioning industries. This month, we talk about
saving solutions, quality, and safety. Seanic recognizes
their decommissioning cutting shears and how UES can
current market conditions may be the norm for some
become a sole source for many of your subsea tooling
time to come, which is why we continue to highlight
needs.
products and services in each publication that we believe
Seanic is pleased to announce two new distribution
embrace those competencies.
partners. Scanmudring in St. Johns, Newfoundland, and
In this issue, we feature an article on the refurbishment
Reliance Subsea in Port of Spain, Trinidad. Both companies
and upgrade of several Vertical Collet Connector Running
will be able to support your ROV tooling needs in their
Tools used with subsea jumper installations. Due to
regions.
the vast number of existing subsea structures fitted
With summer upon us don’t miss an opportunity to utilize
with proprietary connections that interfaced with these tools, a cost-effective means of restoring and, in some cases, upgrading this mature hardware was needed. Even though cost was a factor, quality and safety was paramount in the final decision. We also feature our ECB cavitation water blasting system. This system was originally developed many years ago to safely and effectively clean marine growth on the relatively soft materials used on strakes and fairings. Since that time, operators have become increasingly more confident in the ECB’s effectiveness; over the last 5 years, the ECB has become an industry standard for UWILD inspections.
2 / From The President 2017
Seanic’s 30’ deep test tank to demonstrate your products. With the success of last year’s Demo Days we’ve decided to continue to offer our tank to others in the subsea industry to demo their products in the test pool for no charge. We hope you find this publication beneficial and welcome any feedback. On behalf of the Seanic employees around the world, we want to thank you for your continued support.
CONTENTS From the President . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 //
Seanic News . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 //
Featured Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 //
Product Catalog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 //
Standard ROV Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 // Engineered Solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 // UES Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 //
Product Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
104 //
Centurion Group Portfolio. . . . . . . . . . . . . . . . . . . . .
106 //
Table Of Contents 2017/ 3
WHAT’S NEW AT SEANIC?
VERTICAL COLLET CONNECTOR RUNNING TOOLS REFURBISHMENT Seanic’s Engineered Solutions Group
experience in using the equipment; a level
Upon receipt of the equipment, quality,
recently completed the refurbishment
of competence related to engineering,
engineering, and warehouse personnel
and upgrade of several Vertical Collet
documentation, and design; and an
worked together to disassemble, catalog,
Connector Running Tools for subsea
effective facility capable of handling
and inspect each component of the
jumper installations. This 15-year-old
hardware of this type.
structures. Each unit was assigned a
equipment had been showing its age after many years of offshore service. As such, it was important to restore this mature hardware due to the vast number of subsea structures fitted with proprietary connections with which they interface. Each structure stands over 16ft tall and weighs 18 to 20 kips. The owner’s goal was to bring the equipment
up
to
current
industry
standards and refurbish them to a level of quality equal to or greater than likenew condition. Seanic was selected due to a combination of reasons that ranged from skilled personnel with first-hand
4 / Seanic News 2017
unique identifier that was then marked
The
structures
on every component as it was carefully
custom-machined sub-assemblies for
removed from the system. Disassembly
installation and actuation. During the
took place in Seanic’s warehouse, and
process, Seanic had limited availability or
the bridge crane safely and efficiently
access to OEM documentation, making
removed large sub-assemblies. A detailed
the repair or replacement of some of
review of the original material selection
the sub-components challenging. Once
and integrity was conducted to ensure it
replacement, repair, and final coating
met owner and industry specifications.
of all weldments were completed, the
Additionally, all weldments were stripped
structures
of coating and subjected to Non-
thorough front-end work of Seanic’s
Destructive Examination and repairs
Engineered Solutions Group and quality
were made when and where necessary.
department eliminated any project or
were
contained
several
reassembled.
The
schedule setbacks. Final testing included hydrostatic testing of the entire hydraulic system and functioning of all actuators, cylinders, and motors. A final System Integration Test proved functionality of the structure to integrate and operate the connection of a subsea jumper. To learn more about Seanic’s Engineered Solutions Group, please contact info@ seanicusa.com.
Seanic News 2017 / 5
UES: AHEAD OF THE CURVE Underwater Engineering Services (UES),
its impressive portfolio. They successfully
Seanic’s sister company in Aberdeen, is
decommissioned materials such as
ahead of the curve and well established
power
on the growing decommissioning scene.
flexible risers, and rigid pipe.
Both UES and Seanic specialize in the
UES utilizes two types of cutting shear.
supply of marine and subsea support
The first was the Verachtert hydraulic
cables,
umbilicals,
flowlines,
equipment to the diving, ROV, and decommissioning sectors within the offshore oil and gas and renewables industries. Featuring several products in this catalog, UES built its reputation by being able to deliver the types of pipeline cutting activities required to remove pipes on-site from either topside or subsea. Over a 10-year period during which the company carried out almost 7,000 cuts both topside and subsea, UES successfully completed a significant number of decommissioning projects within the U.K. Continental Shelf and Norwegian waters and continued to build
6 / Seanic News 2017
CAT-S80 SHEAR (TOP); VERACHTERT HYDRAULIC SHEAR, VHS-60 (BOTTOM)
shear (VHS 60), which is generally used for topside cutting but can also be configured for subsea deployment. This cutter has the largest mouth opening of the two offered, with an 800-mm opening jaw height and 830-mm jaw depth. It delivers a crushing force of 9,850 kN, making it one of the most powerful cutting performers in the sector. The second cutting shear was the CAT S80, which can also be used for both topside and subsea decommissioning projects. With a jaw opening of 620 mm and jaw depth 820 mm, this has a crushing force of 8,809 kN. For subsea operations, the CAT S80 has two sets of lifting assemblies to enable it to carry out cuts either horizontally or vertically. Both cutters have dedicated transit frames that can also be used for deck cutting operations. The shears operate
SEANIC’S DEMO DAYS & STATE-OF-THE-ART TEST TANK Seanic’s Demo Days was such a success in 2016 they are pleased to announce plans to continue with their Demo Day program in 2017. Seanic’s offer provides other companies in the subsea industry the opportunity to access this state-of-the-art test tank at little or no cost as they demonstrate their products to current and potential clients. Several companies took advantage of this offer last year and the turnout was clearly a success. We’re currently accepting applications from vendors to participate in future Demo Days and would suggest you contact Karen North (knorth@seanicusa.com subject Demo Day) to schedule your event. Seanic’s facility in Katy, TX (near Houston) includes a full-service test tank, giving clients the ability to test their products in a controlled environment in a cost-effective manner. The tank is 50 ft (15m) square, 30 ft (9m) deep which is large enough to wet-test very large subsea hardware, leaving a work class ROV full access from all sides. It’s reinforced 3 ft (0.9m) concrete base, is designed to accommodate heavy items up to 2000lbs/sq ft (9765 kg/sq m) to be tested.
at a maximum of 350 bar and, therefore, a suitable Hydraulic Power Unit (HPU) is essential to provide the necessary operating parameters. Over the years, UES has delivered tailored equipment packages for topside, subsea, or both, and, depending on the configuration, the equipment supplied may consist of cutting shears, hydraulic power units, control cabin, hose deployment reel, and over boarding equipment. In recent years, engineers at UES delivered a decommissioning campaign for a North Sea operator, which involved using a twin shear package. The project saw the two shears being used simultaneously on the back deck of a vessel, allowing them to pull in twice the volume of umbilical and double the speed of removal. Each shear utilized a dedicated HPU, allowing them to operate simultaneously. Also included was a heated control cabin to allow the technicians to operate the equipment at a safe distance and monitor the control systems for both the shears and the HPUs.
Seanic News 2017 / 7
SCEANIC WELCOMES NEW DISTRIBUTOR PARTNERS Seanic is excited to introduce their newly formed distributor partnerships with Scanmudring Canada Inc. in St. Johns, Newfoundland and Labrador, Canada, and Reliance Subsea Services in Port of Spain, Trinidad. After extensive research we concluded these two companies were ideal to partner with, due to geographic location, customer relationships and above all capabilities “says Tom Ayars”, President of Seanic Ocean Systems. “In today’s environment, our clients need the most flexible, proven solutions,” says Jason Price, Managing Director of Scanmudring Canada. “This partnership further demonstrates our proactive approach to customer collaboration, and our commitment to delivering tailormade solutions that meet specific client needs. With a large roster of highlyeffective, proprietary equipment located in Eastern Canada, our clients will benefit from both time and cost efficiencies.” Looking to the Future
About Scanmudring
About Reliance
With more than 17 years’ experience,
Reliance Subsea Services (Reliance) is a
Scanmudring has advanced as a global
dynamic company created by local and
leader in the development, manufacture
committed professionals to address
and operation of advanced subsea heavy
a growing subsea market. Reliance
machinery for harsh environments.
specializes in tooling and equipment
Scanmudring specialize in dredging,
of all types, manpower support and
excavation and construction work for the
warehouse provisions.
oil, gas and renewable energy industries, providing
unparalleled
operational
expertise. Scanmudring is dedicated to providing innovative, robust and reliable solutions that are versatile enough to meet the most demanding subsea challenges.
facility near the Piarco Airport, and
With the full support of Seanic Ocean
with its proximity to local ports,
Systems, both companies have been outfitted with a pool of ROV rental tools
With a new tooling rental and services
Reliance becomes the first of its kind in Scanmudring Canada Inc. is a subsidiary
providing rapid response support to Oil
of Scanmudring AS (Norway), and
& Gas operators and service providers
services primarily Eastern Canada and
throughout
behalf of Seanic for engineering design
the Artic.
Region. Combining this service with the
build projects.
Contact:
ability to provide engineering, project
and have the ability to sell and support standard tooling rental activity. Both companies will also liaise with clients on
Jason Price, P.Eng. Managing Director, Scanmudring Canada jasonprice@scanmudring.ca 709-325-2299
the
entire
management, fabrication and storage, Reliance strives to ensure the best quality customer service and world class products to guarantee a long-lasting business relationship built on trust. Contact: Karishma Maharaj Director of Operations info@reliancesubsea.com
8 / Seanic News 2017
Caribbean
868-686-2739
ECB SPECIALIZED TOOLS CAVITATION WATER BLASTING: EFFECTIVE CLEANING FOR SUBSEA OBJECTS
Seanic’s ECB cavitation cleaning system
damage the object being cleaned. Using
was developed to gently and effectively
cavitation for cleaning has alleviated
remove barnacles and other marine
these issues and allowed Seanic to make
growth from soft or sensitive surfaces,
an extremely efficient and powerful
such as strakes and fairings. Unlike
cleaning machine. Additionally, this
traditional 5,000 or 10,000 PSI water
one-of-a-kind marine growth removal
blasters, our ECB unit is capable of
device has become an industry standard
cleaning subsea objects with enough
for risers, moorings, and vessel hulls
force to remove barnacles and deposits
during underwater inspection in lieu of
without causing damage to soft plastic
dry docking, or UWILD as it is commonly
or rubber surfaces. Traditionally, high-
called.
pressure water blasters are often
PLAY VIDEO FOR DEMONSTRATION
ineffective because they aren’t powerful enough or they are too powerful and PHOTO CREDIT: AIMS INTERNATIONAL
Featured Products 2017 / 9
PRODUCT CATALOG
SPRING 2017
www.seanicusa.com
A Centurion Group company
SEANIC STANDARD ROV TOOLING
www.seanicusa.com
A Centurion Group company
ELECTRIC SMART TORQUE TOOL API 17H CLASS 1-4
Seanic has designed an Electric Smart Torque Tool in the tradition of providing our customers a simple, rugged and reliable product. The tool has a closed loop speed/position control system, allowing fine control and angular position feedback. Real-time torque limiting gives very accurate torque feedback and control. The tool is ideally suited for both subsea and surface applications requiring up to 2000 ft-lbs of torque.
TECHNICAL SPECIFICATIONS REAL-TIME TORQUE LIMITING
Real-time torque limiting gives very accurate torque feedback and control. The tool is ideally suited for both subsea and surface applications requiring up to 2000 ft-lbs of torque.
HIGHLY ACCURATE TORQUE FEEDBACK
As it does not require an HPU for operation, surface testing in the yard or shop environment is easily accomplished. Torque is measured by internal feedback with an accuracy of +/- 2%.
2000 ft lbs 25 inches 15 rpm
MAX TORQUE OUTPUT
120 VAC at 12.5 A max
POWER
LENGTH
120 lbs
WEIGHT (AIR)
MAX SPEED
15 rpm
MAX SPEED
Start/stop; Direction; Speed; Torque Control
MOTOR CONTROLS
Latches disengage when power is lost. Same proven latch design as standard Seanic torque tools. Internal electric-driven HPU circuit provides hydraulic power and control.
FULLY AUTOMATED HYDRAULIC-ACTUATED LATCHES
Torque limited by closed loop motor current and strain gauge feedback. Safe Torque Off feature (torque output is immediately disengaged if limit is met).
TORQUE LIMITING AND ALARMING
No changes in accuracy or performance due to pressure and temp changes. Single 3/4� hose houses and protects the cable assembly, replacing multiple hydraulic hoses. Dynamic subsea test jig designed specifically for ETT use available as option.
125:1 TORQUE MULTIPLIER
Calibrated strain gauge feedback within +/-2%; Input current limiting and alarming; Optional communication (isolated RS232, ethernet); Turns counter, torque output, shaft position displayed topside; Speed limiting alarming; Resolver-based turns counter accurate to less than 1/10th degree of a revolution.
ADDITIONAL FEATURES
ROV Tooling 2017 / 13
SMART TORQUE TOOL
API 17H CLASS 1-4
The Seanic Smart Torque Tool has retained the rugged features of its predecessor and added the technologically advanced features our customers require.
TECHNICAL SPECIFICATIONS RUGGED FEATURES
We have retained the mechanical counter as a backup which allows for failsafe operation if the battery is depleted, but also added a digital display that provides real-time torque and turns both subsea and on the surface, via laptop control.
LOW MAINTENANCE DESIGN
The tool can be supplied as a stand-alone smart tool or with a proportional valve pack, laptop and GUI that can limit torques, control speed and direction and log values.
RELIABLE PERFORMANCE
Our robust latch system provides confidence that you are securely locked into the subsea bucket and will stay that way until you choose to disengage. In the case of an unforeseen power failure, our latches are spring-loaded and will retract, allowing you to safely disconnect from the work site.
LATCHES
Spring Return Robust Dogs 17-4 Hardened Fins
WEIGHT
110 lbs/50 kg (air) 85 lbs/39 kg (water)
MECHANICAL COUNTER
Display in Tenths Large, easy-to-read numbers Oil-filled, Independently-sealed housing Allows failsafe operation if battery is depleted or display is compromised
14 / ROV Tooling 2017
WHAT’S IN THE BOX + Subsea Display + Surface Test Jig and Read Out + #8 JIC Hoses (2) + #4 JIC Hose + Comp Bottle with Fittings + Operating & Maintenance Manual + Electrical Spares + Mechanical Spares + 195CC Motor (2) + 36CC Motor (2) + 1-4 End Effector and Test Stem + Cable Between Tool and Display
HI-TORQUE TOOL
API 17H
Seanic Ocean Systems has designed an API 17H and ISO 13628-8 compliant hi-torque tool to reliably perform a multitude of subsea applications.
TECHNICAL SPECIFICATIONS REMOVABLE 17H CLASS 4 NOSE
Our tool has a removable and exchangeable 17H Class-4 nose that can also be attached to Seanic’s Smart Torque Tool , for a convenient two-in-one functionality.
TWO-IN-ONE FUNCTIONALITY
The hi-torque tool is useful in installing umbilicals and flying leads, opening and closing valves on a Christmas tree, and conjunction with Tool Deployment Units (TDUs).
MECHANICAL TURN COUNTER
A mechanical turns counter, which needs no battery and features highly visible numbers for easy monitoring, eliminates the inherent problems commonly associated with electronic digital counters.
WHAT’S IN THE BOX + Surface Test Jig with Topside Digital Readout + Hoses + Complete Spares Kit + 1 High Torque Motor + 1 High Torque Adapter + Operating & Maintenance Manual
Mechanical (no battery)
COUNTER FEATURES
Highly visible numbers Displays in tenths Oil-filled, independently sealed housing 72 lbs/33 kg (air)
WEIGHT
55 lbs/25 kg (water)
ROV Tooling 2017 / 15
FLYING LEAD ORIENTATION TOOL The Seanic Flying Lead Orientation Tool, or FLOT, is designed and built for ease of operation and maintenance. The tool allows for angular and rotational orientation of a class 4 torque tool to aid in connection of flying leads subsea. Simple design allows for customized configurations. Built-in load holding valves ensure safe and reliable pitch control.
TECHNICAL SPECIFICATIONS DURABLE DESIGN
The Seanic Flying Lead Orientation Tool (FLOT) provides the operator a durable design with greater versatility and less overall weight, which means you don’t sacrifice valuable payload.
RIGOROUSLY TESTED
Seanic’s FLOT provides the option of roll up to 360° in certain configurations, giving you the ability to dock flying leads in the most difficult of conditions.
BUILT TO FIT SEANIC TORQUE TOOL
This unit has been designed to fit the Seanic’s torque tool, and has been customized or retrofitted for compatibility with many industry-recognized torque tools.
MATERIALS DIMENSIONS
316 SS / 6061 T6 AL / Ni-Al-Brz
WHAT’S IN THE BOX
17”W x 40”L x 14”H Two open-center directional control valves
+ #8 JIC Hose (2)
Pitch cylinder: 3000 psig at .5 gpm
+ #4 JIC Hose (2)
Roll motor: 3000 psig at 1.75 gpm
+ Spares Kit
FLOT WEIGHT
149 lbs/68 kg (air) - 108 lbs/49 kg (water)
+ Operating & Maintenance Manual
PITCH ANGLE
135⁰ (90⁰ down from horizontal, 45⁰ up from horizontal)
ROLL ANGLE
32⁰ either direction (360⁰ optional configuration depending on application)
HYDRAULIC REQUIREMENTS MAX OPERATING PSI & FLOW
MAX HANG WEIGHT ON TT
600 lbs
16 / ROV Tooling 2017
SUBSEA TORQUE
VERIFICATION UNIT
Seanic Ocean Systems has a subsea verification unit that verifies torque readings of an API 17H Class 1-4 torque tool at depth. This tool is also available as a dual gauge unit, subsea switchable between class 1-2 and 3-4 without the need to change gauges at the surface. Useful when multiple tools are being used that require subsea verification prior to use.
TECHNICAL SPECIFICATIONS SUBSEA AND SURFACE READINGS
The unit readily attaches to the ROV cage or TMS to provide a reliable assessment of changes in torque output when adjustments are made, without the need to return to the surface.
SIMPLE TORQUE OUTPUT ASSESSMENT
Our verification unit boasts a two-in-one functionality, as it can additionally be used to verify torque adjustments on the surface in place of a normal torque tool test jig.
PURELY HYDRO-MECHANICAL DESIGN
Because it is a purely mechanical piece of equipment, our subsea verification unit has no electronics to fail, batteries to die, wires to break or electrical housings to flood.
WHAT’S IN THE BOX
316 L SS
MATERIALS
Nickel-Aluminum-Bronze
+ 2,200 ft-lb Gauge (2) + 500 ft-lb Gauge (2) + Test Stems + Operating & Maintenance Manual
17-4 SS API 17H Class 1-2 end effector
INTERFACE
API 17H Class 3 end effector API 17H Class 4 end effector 170 lbs/77 kg (air)
WEIGHT
145 lbs/65 kg (water) 2,000 ft-lbs
MAX INPUT TORQUE
ROV Tooling 2017 / 17
INTELLIGENT VALVE PACK Seanic Intelligent Valve Packs can be configured to meet many requirements. The pack is designed and built to operate our Smart Torque Tool, but can also be configured for other tooling requirements including FLOT’s and custom multi-function tools.
TECHNICAL SPECIFICATIONS COMPACT DESIGN
Standard design allows for scaling of valve size and type providing simple rugged function while maintaining compact and light weight form.
CUSTOM SOFTWARE
Closed or open loop control, data logging and custom control interfaces are all available options that can be added to the system.
STANDARD OR CONFIGURED TO SUIT
Graphical User Interface design can be customized for a wide range of applications.
WEIGHT
DIMENSIONS FEATURES
87 lb (air)
REQUIREMENTS
Power and Communications:
15 station
24 VDC @ 6 amps, RS232
68 lb (water)
Hydraulic:
10 1/4” W x 22” L x 8 3/4” H
3,000 psi @ 20 gpm max
15 NG directional control valves, capable of proportional pressure control on 10 stations Transducers integrated to monitor supply, return and ambient pressure Clear lid for viewing Diagnostic’s LED’s Isolated RS232 circuit Customizable software and valve configurations
18 / ROV Tooling 2017
30 #4 JIC A/B Outputs; #12 JIC P/T Inputs; Filter included
TORQUE TOOL ADAPTER
API 17H CLASS V
Seanic has designed and manufactured an API 17H Class IV to API 17H Class V torque adapter for use in all standard API 17H Class V interfaces. Using an API 17H Class IV and API 17H Class V tool on the same dive is very common.
TECHNICAL SPECIFICATIONS API CLASS IV TO API CLASS V
The real beauty of an API 17H Class V adapter is that no hydraulic connection is required, which allows the API 17H Class V tool to be left in place while other API 17H Class IV duties are being performed.
SPRING-LOADED EFFECTOR (OPTIONAL)
The tool can be purchased with or without a spring-loaded end effector and in latching or nonlatching configurations.
WHAT’S IN THE BOX
Aluminum housing
MATERIALS
Steel gear reduction
+ Surface Test Jig and Read Out + Compensator Bottle Complete with Fittings and Gear Oil + Spares Kit + Operating & Maintenance Manual
17-4 SSTL location fins 17-4 SSTL end effectors Delrin nose 316 SSTL ROV handle 316 SSTL hardware 0-5,000 ft-lbs 215 lbs/98 kg (air)
TORQUE RANGE WEIGHT
170 lbs/77 kg (water)
ROV Tooling 2017 / 19
TORQUE TOOL ADAPTER
API 17H CLASS 6/7
Seanic has designed and manufactured an API 17H Class 6/7 torque adapter for use in all standard API 17H Class 6/7 interfaces. The tool is ideally suited for any subsea application requiring up to 25,000 ft-lbs torque.
TECHNICAL SPECIFICATIONS MATERIALS
Stainless steel housing Steel gear reduction 17-4 SSTL location fins 17-4 SSTL end effectors
LATCHING OR NON-LATCHING CONFIGURATIONS
The tool can be purchased with or without a spring-loaded end effector and in latching or non-latching configurations.
NO HYDRAULIC INTERFACE NECESSARY
The tool requires no electrical or hydraulic interface, freeing the ROV to leave it in place and perform other subsea operations.
Delrin nose 316 SSTL ROV handle 316 SSTL hardware INPUT INTERFACE OUTPUT INTERFACE
API 17H Class 4 male end effector (1.5” square drive) API 17H Class 7 female end effector (3.5” square drive) API 17H Class 6 female end effector (2.625” square drive)
WEIGHT
535 lbs/243 kg (air) 425 lbs/193 kg (water)
TORQUE RANGE
5,000-25,000 ft-lbs
20 / ROV Tooling 2017
WHAT’S IN THE BOX + Surface Test Jig and Read Out + Standard Nosecone + Class 6/7 End Effector and Test Stem + Compensator Bottle Complete with Fittings and Gear Oil + Spares Kit + Vector Nosecone (optional) + Operating & Maintenance Manual
17 H/D HOT STABS
AND RECEPTACLES
Seanic manufactures and stocks a wide variety of API/ISO standard hot stabs and receptacles to meet your needs. Using the highest quality materials and stringent quality program ensures our products perform in the harshest subsea environment.
TECHNICAL SPECIFICATIONS ROV FRIENDLY COMPLIANT HANDLES 316 SS
All products are accompanied with material certification of US manufacture as well as pressure test reports.
PRESSURE RATINGS TO 20,000 PSI
Pressure ranges are from 5,000-20,000psi on all models.
OTHER MATERIALS AVAILABLE UPON REQUEST
Stabs and manifolds conform to API 17D or API 17H (ISO 13628-8) and can be configured with various fitting sizes and types.
WHAT’S IN THE BOX
Handles are 316 SS
MATERIALS
Bodies are Xylane coated Nitronic 60
+ Operating & Maintenance Manual
Female receptacles are Nitronic 50 Nose tips are Ni-Al-Brz Fittings and fasteners are 316 SS O-rings are: 70 Durometer HNBR on Dummy Stabs 90 Durometer HNBR on PSI Stabs
ROV Tooling 2017 / 21
PADDLE VALVES Seanic Ocean Systems offers ROV-operable ball valve interfaces to complement the wide array of subsea ball, needle and directional control valves currently on the market. Seanic’s commitment to durable design and construction ensures that your tools will hold up under the demands of the subsea environment. We maintain a constant supply of paddle valves in stock, and can additionally provide your team with the necessary valve components to suit your project needs.
TECHNICAL SPECIFICATIONS CORROSION-RESISTANT
Seanic’s paddle valves, manufactured entirely from durable and corrosion-resistant stainless steel, are designed with hard stops to prevent an ROV from over-torquing and avoid costly damage to the valve stem.
ROV-OPERABLE INTERFACE
Seanic’s paddle valves meet the industry standard API 17H specifications for ROV interface tooling.
20-YEAR DESIGN LIFE
Designed with longevity in mind, our stainless steel paddle valves resist the damaging effects of subsea corrosion and boast a 20-year design life.
WHAT’S IN THE BOX MATERIALS
DEPTH RATING
WEIGHT
22 / ROV Tooling 2017
Stainless steel
Full ocean depth
11 lbs/5 kg
+ Operating & Maintenance Manual
HUB CLEANING TOOL
API STANDARD OR CUSTOM
This tool creates a clean and polished sealing surface to allow a gasket to attain a reliable seal, minimizing operational risks. Our HUB Cleaning Tool can be built with a scrubbing surface of various ScotchBrite® pads or brushes to further break up tough marine deposits.
TECHNICAL SPECIFICATIONS REMOVES MARINE GROWTH
Seanic Ocean Systems has created a specially designed tool for the removal of fouling and marine growth from wellhead sealing surfaces prior to AX/VX gasket installation.
MANIPULATOR- OR HYDRAULICDRIVEN
The hub cleaning tool can be manipulator-driven or built for hydraulic operation, and is available to fit all API standard or other customer-requested hub sizes.
DESIGN ELIMINATES EXPOSED HARDWARE TO WELL BORE
A valuable instrument for subsea construction or drilling work, the hub cleaning tool features no bolts or pieces that could potentially fall into the wellhead, eliminating the risk of costly damage and retrieval efforts.
WHAT’S IN THE BOX + Operating & Maintenance Manual + Spare Scotch Brite® Pads + Spare Hardware
Stainless Steel
MATERIALS
Nickel-Aluminum-Bronze HDPE 65 lbs/29 kg (air)
WEIGHT
28 lbs/13 kg (water) 24.5”W x 18”H
DIMENSIONS
ROV Tooling 2017 / 23
GASKET REMOVAL TOOL
AX/VX AND CUSTOM DESIGN Seanic Ocean Systems has designed and manufactured a variety of ring gasket removal and installation tooling that boasts a rugged yet lightweight design to perform under the formidable conditions of the deep sea environment. In addition to the standard configurations currently in stock, we have engineered and manufactured custom Max-8 and Max-14 gasket removal and replacement tool designs that require side entry to the wellhead (2” and 4” AX).
TECHNICAL SPECIFICATIONS RUGGED, LIGHTWEIGHT DESIGN
This tool can be manufactured to accommodate a variety of industry standards or custom gasket sizes.
RELIABLE REMOVAL AND INSTALLATION
Our gasket removal and installation tool, designed to be positioned by the ROV manipulator, efficiently and reliably replaces standard 18 3⁄4-inch AX and VX style gaskets.
CORROSION-RESISTANT ALLOY CONSTRUCTION
The tool is manufactured using 100% corrosion- resistant alloys, ensuring resistance to corrosion damage and years of dependable subsea operation.
WHAT’S IN THE BOX + AX/VX Tool
WEIGHT (AIR)
WEIGHT (WATER)
18 3/4”
61 lbs
54 lbs
+ #4 Size Hose (2)
16 3/4”
56 lbs
48 lbs
+ Spare Grip Tape
15”
50 lbs
42 lbs
MATERIALS
Stainless steel Nickel-Aluminum-Bronze
24 / ROV Tooling 2017
+ Operating & Maintenance Manual
5K WATER BLASTER
HIGH-PRESSURE
Seanic Ocean Systems has designed and manufactured high-pressure Triplex water blasters for a multitude of purposes. Common applications include cleaning marine growth from subsea hardware and structures prior to inspection and applying high pressure to break up hard materials in mud for eased dredging.
TECHNICAL SPECIFICATIONS HIGH-PRESSURE CLEANING
Built with longevity in mind, our 5K water blaster requires less frequent gearbox flushing than other similarly powered water blasters on the market.
POWERFUL FLUID INJECTION
In addition, the blaster can also be used as a high pressure, high-volume pump for rapid and powerful fluid injection.
AVAILABLE FOR RENTAL
We maintain a stock of our standard 5K water blaster, and offer the option of customization according to customer needs.
WHAT’S IN THE BOX + Compensator bottle complete with gear and oil fittings + Spare strainer + Wand / turbo nozzle + Gauge panel + #8 JIC hose (2) + #6 JIC hose (1) + #8 5K JIC hose (1) + Spares kit + Operating & maintenance manual
#8 JIC hoses for supply and return of the motor
INTERFACE
#6 JIC hose motor case drain #8 JIC high pressure hose for water nozzle Input: 3000 psi / Output: 5000 psi Input: 12 gpm / Output: 4.5 gpm 100 lbs/45kg (air) - 60 lbs/27 kg (water) 15”W x 27”L x 7”H
MAX PRESSURE MAX FLOW WEIGHT DIMENSIONS
ROV Tooling 2017 / 25
SUPER GRINDER The Seanic Ocean Systems Super Grinder is a powerful tool for cutting materials up to six inches in thickness. Aside from the standard fiber abrasive blade, the super grinder can operate with blade options including carbide tooth, carbide brazed, and re rescue-grade blades to suit the most demanding of subsea cutting needs.
TECHNICAL SPECIFICATIONS MATERIALS
316 SS frame, shroud and hardware Painted aluminum housing
REMOVABLE AND REPLACEABLE BLADES
Powered by a commonly used and industry-accepted thruster motor, our Super Grinder features removable and replaceable blades to best suit the task at hand.
CUSTOM SIZE OPTIONS
Our standard 20-inch blade is in stock, and can be manufactured in sizes ranging from 6-30 inches, in addition to custom diameters according to project specifications.
RIGOROUSLY TESTED
This rugged and rigorously tested tool is used for decommissioning, storm repair and recovery and for cutting and removal of jumpers and umbilicals to the surface.
17-4 drive shaft Fiber abrasive grinding wheel Stainless steel Nickel-Aluminum-Bronze Oil of opportunity Motor requires A & B connection with #8 JIC Case drain requires C connection with #10 JIC Requires open center directional flow valve (1) WEIGHT
120 lbs/54 kg (air) 100 lbs/45 kg (water)
OPERATING PRESSURES
WHAT’S IN THE BOX + #8 JIC Hose (3) + Spare Abrasive Blades (15)
Max operation pressure: 3,000 psi
+ Diamond Blades (upon request)
Max flow rate: 20 gpm
+ Operating & Maintenance Manual
26 / ROV Tooling 2017
BRUSHING TOOL
SINGLE HEAD
Seanic Ocean Systems has designed a powerful brushing tool that cuts through tough marine growth on jacket legs, wellheads and other structures to allow for improved inspection, cutting, or attachment to subsea structures. The hydraulic-driven rotary brush, held by the ROV manipulator, safely and efficiently cleans growth and accumulated debris on subsea structures. The brush operates to a working depth of 10,000 FSW.
TECHNICAL SPECIFICATIONS CUSTOM-ENGINEERED TO ORDER
Our custom-engineered brushing tool features removable individual bristle pods, eliminating the need to replace the entire brush head when exhausted bristles begin to show signs of wear.
OPTIONAL CITRIC ACID PUMP
The tool can be outfitted with a reservoir and pump to inject citric acid onto the cleaning site through the brush head, ensuring thorough removal of stubborn calcium growth and marine debris.
REMOVABLE BRISTLE PODS
Our custom-engineered brushing tool features removable individual bristle pods, eliminating the need to replace the entire brush head when exhausted bristles begin to show signs of wear. Seanic also offers a standard HUB cleaning tool that has an 18 3⁄4-inch diameter brush head, and can be customized to any dimensions to meet your subsea project specifications.
WHAT’S IN THE BOX
6061 T-6 Aluminum
MATERIALS
316 stainless steel
+ All Hoses Supplied
Ampco 45 Nickel-Aluminum-Bronze
+ Spare Bristle Pods
Carbon steel (motor)
+ Citric Acid Pump and Reservoir (as required) + Operating & Maintenance Manual
Polypropylene bristles Brass or nylon bristles 6 gpm @ 2,000 psi 10,000 FSW
HYDRAULIC REQUIREMENTS WORKING DEPTH
ROV Tooling 2017 / 27
ECB UNITS
CLEANING METHOD
Seanic has developed a revolutionary new cleaning method for subsea applications. By combining low pressure/ high volume pumps and inertial cavitation nozzles, Seanic has developed a safe and effective ROV powered cleaning system. Traditional high pressure water blasters can be ineffective or even destructive if used improperly. The Seanic ECB systems are a field proven solution for removing marine growth from vessel hulls, strakes, risers, fairings and moorings.
TECHNICAL SPECIFICATIONS SAFE, THOROUGH CLEANING WITHOUT DAMAGE
Using cavitation for cleaning has alleviated these issues and allowed Seanic to make an extremely efficient and powerful cleaning machine for removal of marine growth from vessel hulls, strakes, risers, fairings and moorings.
USED ON STRAKE/FAIRING, UWILD, ETC.
Seanic has developed a revolutionary new cleaning method for subsea applications.
RELIABLE, PREDICTABLE RESULTS
Traditionally high pressure water blasters are often ineffective because they aren’t powerful enough or they are too powerful and often damage the object being cleaned.
WHAT’S IN THE BOX INPUT
Input 3000 psi @ 20-22 gpm
OUTPUT
Output 3000 psi @ 14 gpm
WEIGHT
275 lbs (air) 225lbs (water)
MATERIALS
316 SS Aluminum
DIMENSIONS
28 / ROV Tooling 2017
30”W x 36”L x 12”H
+ Pump Assembly + Nozzles/Hoses + Complete Spares Package Includes Fittings, Hoses, etc. + Maintenance Tools and Supplies + Operating & Maintenance Manual + Spares Inventory List
MULTIPURPOSE PUMPS
10K-15K PSI
This unique pump has the ability to pump a multitude of fluids and can be used for methanol service with no risk of cross contaminating the ROV’s supply oil. These pumps can be delivered with a variety of different reservoirs and directional control valves rated for 10k and 15k service.
TECHNICAL SPECIFICATIONS 3.8:1 RATIO
Seanic’s multipurpose pumping system has a 3.8:1 ratio and is capable of pumping fluids to a working pressure of 10,000 psi.
CORROSIONRESISTANT DESIGN
The pump is rated for use in 10,000 FSW and is made of corrosion-resistant materials, making it robust and reliable for subsea use.
RATED TO 10,000 FSW DEPTH
The pump is ideally suited for hydrate remediation work, as it can draw a powerful 22 in HG vacuum.
316 SS housings, SS fittings
MATERIALS
Ni-Al-Brz piston 78 lbs/35 kg (air)
WEIGHT
60 lbs/27 kg (water) 10,000 psi, 2.5 gpm max flow Max HPU input pressure: 2900 psi
MAX OUTPUT PRESSURE OPERATING PRESSURES
Flow rate not to exceed 8 gal/min
WHAT’S IN THE BOX + Spares Kit + Operating & Maintenance Manual
Oil of opportunity
HYDRAULIC
Requires one open-center directional flow valve Pump and tank: #6 JIC fittings
CONNECTIONS
Input and output: #4 JIC fittings 10,000 FSW
WORKING DEPTH
36” x 6” x 8”
DIMENSIONS
ROV Tooling 2017 / 29
DYNASET PUMP
5K WATER BLASTER
The 5k Dynaset Water Blaster pump system was designed for high pressure, subsea cleaning.
TECHNICAL SPECIFICATIONS COMPACT SIZE
Common applications include cleaning marine growth from subsea hardware and structures prior to inspection and applying high pressure to break up hard materials in mud for eased dredging.
RELIABLE PERFORMANCE
At it’s core, the hydraulically driven Dynaset intensifier pump uses filtered sea water and a ROV friendly Turbo nozzle.
LOW MAINTENANCE
In addition, the pump can be used as a high pressure, high flow for rapid and powerful fluid injection.
WEIGHT DIMENSIONS
25 lbs (air) / 15 lbs (water) 18 in W x 19 in D x 7 in H
MATERIALS
Primarily Aluminum 6061-T6 and Stainless Steel
HYDRAULIC CONNECTIONS
Requires (1) open center directional control valve(s). P and T connections are #12 JIC male fittings.
INPUT PRESSURE & FLOW OUTPUT PRESSURE & FLOW
30 / ROV Tooling 2017
WHAT’S IN THE BOX
3,000 PSI @ 30 gpm max 5,000 PSI @ 5.5 gpm
+ Spare Hoses + Rebuild Kit + Operating & Maintenance Manual
PH PROBE Seanic Ocean Systems has designed a pH probe used to measure and monitor pH in the subsea environment, particularly useful in drilling operations and the prediction of cement returns. The probe, which features a handle for ease of manipulation by the ROV, monitors pH levels within a wellbore and assists in the accurate prediction of cement return.
TECHNICAL SPECIFICATIONS ACCURATE SUBSEA PH READINGS
The probe also features a logging function that can record pH readings for later download and analysis.
BATTERY-POWERED
Our pH probe is entirely self-contained and battery powered, with an extensive battery life of approximately 72 hours.
HIGHLY VISIBLE LED DISPLAY
The probe’s red LED display is highly visible in dark water, and features an energy-conserving sleep function that can be switched on or off by flashing the ROV lights.
WHAT’S IN THE BOX + Spares Kit + Solutions + Operating & Maintenance Manual
65 lbs/30 kg (air)
WEIGHT
10,000 FSW/3,000 MSW
DEPTH RATING
Approx 72 hours display time
BATTERY LIFE
54 in L x 7 in diameter (largest)
DIMENSIONS
Stainless steel body and display housing
MATERIALS
UHMW probe
ROV Tooling 2017 / 31
TORQUE RECEPTACLE
API 17D
Seanic Ocean Systems maintains a supply of standard and customizable API Torque Receptacles in a variety of materials to interface with an ROV torque tool. Our bearingless torque receptacles can be panel-mounted for reliable docking, valve rotation, and interface with a torque tool or other subsea equipment to prevent costly damage to installation valves.
TECHNICAL SPECIFICATIONS NICKEL ALUMINUM BRONZE CASTING
Seanic API Torque Receptacles are available in three materials to ensure sound interface and reliable performance with your subsea equipment. We offer torque receptacles in corrosionresistant stainless steel, durable carbon steel, or a self-lubricating Nickel-Aluminum-Bronze alloy.
NO PAINTING REQUIRED
While standard torque receptacles are currently in stock, Seanic’s API Torque Receptacle can be modified as needed to meet customer demands for specific projects or custom orders.
BUILT TO API 17H
Our superior quality torque receptacles conform to API 17H and ISO 13628-8 standards, and can be machined to match any custom bolt pattern—providing a seamless connection and guaranteed compatibility with your ROV.
WHAT’S IN THE BOX MATERIALS
1020 Carbon Steel
316 L Stainless Steel
Ni-Al-Brz
32 / ROV Tooling 2017
LINEAR VALVE OVERRIDE TOOL
LVOT/LAOT
The Seanic Linear Valve Override Tool (LVOT ) is designed to API 17H specifications to manually override linearly-actuated valves that have lost hydraulic control power and returned to the closed or fail-safe position. Custom lockout positions are available.
TECHNICAL SPECIFICATIONS ROV-DEPLOYABLE
The LVOT and lockouts are designed to be deployed through ROV intervention.
THREE LOCKOUT SIZE OPTIONS
Custom lockout positions are available.
MANUAL VALVE OVERRIDE
In addition to the LVOT, three different size lockouts are supplied to lock the linearly actuated valve at the 2-inch, 5-inch and 7-inch positions. The LVOT and lockouts are designed to be deployed through ROV intervention.
WHAT’S IN THE BOX + Type A, B and C Heads + Intensifier Panels + Lockouts (as needed) + Spares + Spares + Hoses + API 17H Hot Stab Receptacle (Dual Port or Single Port) + Operating & Maintenance Manual
300 lbs/136 kg (air)
WEIGHT
256 lbs/116 kg (water) 3000 psi (rod side)
MAX PRESSURE
9115 psi (piston side) 13 inches Spring retracts plunger
STROKE FAIL SAFE
170,000 lbs
MAX FORCE
Spring return retracts plunger
INTERFACE
ROV Tooling 2017 / 33
GL4 REGAN LATCH RELEASE
TOOL
Seanic Ocean Systems manufactures a GL4 Regan Latch Release Tool for the disconnection and removal of subsea guideposts. The damaged or non-functional guidepost can then be retrieved to the surface along existing guide wires.
TECHNICAL SPECIFICATIONS SIMPLE, RUGGED AND RELIABLE
Our GL4 Regan Latch Release Tool, designed to be held in the ROV manipulator, enables an ROV to mechanically attach to the top of a guidepost and enable its removal using hydraulic power to compress and disengage the latching mechanism that holds the guidepost in place.
BUILT TO FIT GL-4 LATCHES
The GL4 Regan Latch Release Tool’s hydraulic supply can be either plumbed directly to the ROV, or supplied in the form of a hot stab attachment.
WHAT’S IN THE BOX MATERIALS
316 L SS, carbon steel or aluminum
STROKE
3”
OUTPUT
3,000 psi @ 2 gpm
RELEASE FORCE WEIGHT
18,000 lbs 35 lbs/16 kg (air) 28 lbs/13 kg (water)
34 / ROV Tooling 2017
+ Spares Kit + Hoses + Operating & Maintenance Manual
DOCKING CONE
API/ISO STANDARD
Seanic Ocean Systems manufactures and maintains a supply of API/ ISO standard docking cones for the stabilization and alignment of an ROV modular skid.
TECHNICAL SPECIFICATIONS API/ISO STANDARDS
Our docking cone is built to API/ISO standards guaranteeing ROV compatibility, no matter the application.
HYDRAULICALLY-ACTUATED
The hydraulically actuated docking cone connects to a receptacle and serves as an interface between objects for such purposes as tree and piletop landings, pile alignment, docking to subsea tooling systems, and as a component installed on a Tool Deployment Unit (TDU).
GUARANTEED ROV COMPATIBILITY
Seanic can also provide the matching female mating receptacle that can be mounted on the tree or pile for orientation and simplified interface purposes.
WHAT’S IN THE BOX + Hoses
316 Stainless Steel
MATERIALS
Anodized Aluminum Housing
+ Spare Seals Kit
Delrin Nose Cone
+ Operating & Maintenance Manual
20 lbs/9 kg (air)
WEIGHT
16 lbs/7 kg (water) 3,000 psi @ 1 gpm 1/4in JIC
OPERATING PRESSURE SIZE FITTINGS
ROV Tooling 2017 / 35
SUBSEA LOAD CELL The Seanic load cell is designed to provide accurate, reliable load readings for the lifting of subsea structures. This unit is a simple, rugged and reliable alternative to some of the other high tech options on the market. Calibration certifications are good for one year and can be quickly recertified annually. The subsea load cell comes with 2x gauges: one 0-10000 lb calibrated and one 0-20000 lb calibrated and can be interchanged quickly.
TECHNICAL SPECIFICATIONS INSTALLS BETWEEN LIFTING LINE AND LOAD
The subsea load cell installs directly between the lifting line and load itself.
EASILY MONITORED BY AN ROV
There are no electrical or battery operated components and the load cell can be easily monitored by an ROV with the large, easy-to-read display.
NO ELECTRICAL/BATTERY OPERATED COMPONENTS
The cells are manufactured of all stainless components and are completely oil-filled so corrosion is not a problem.
WHAT’S IN THE BOX MATERIAL
316/304/17-4 SS
CAPACITY
20,000 lbs max lift
DIMENSIONS WEIGHT
12” L x 12” W x 8 1/2” D 55 lbs (air) 45 lbs (water)
CYLINDER MAX PRESSURE RATING
36 / ROV Tooling 2017
3,000 psi
+ Spare Gauge + Operating & Maintenance Manual
SUCTION CUP
STICKY FOOT
Seanic Ocean Systems designs and manufactures a suction cup sticky foot that can be built to custom sizes or suction levels to assist in station-keeping and lifting smooth-surface objects.
TECHNICAL SPECIFICATIONS SIMPLE, RUGGED DESIGN
Its high level of suction and grip ensures that an ROV will stay reliably in place when attached to smooth surfaces such as a vessel hull or pipeline.
LOW COST
The sticky foot can be deployed by the ROV manipulator or hard-mounted to the vehicle in an appropriate location for the job.
CHOICE OF ROV HANDLES
While we have a variety of sizes in stock, our sticky foot can be manufactured to custom shape or size specifications, load holding capacities, and suction levels to ensure reliable performance under any conditions your ROV may encounter.
250 mm 10,000 FSW 6061 T-6 Aluminum
SUCTION CUP BELLOWS
9 gpm @ 2,000 psi
WORKING DEPTH MATERIALS
250 gpm
HYDRAULIC INPUT REQUIREMENTS OUTPUT REQUIREMENTS
316 SS Rubber
45 lbs/20 kg (air)
Ampco 45 Ni-Al-Brz
38 lbs/18 kg (water)
Carbon steel (motor)
12” x 12” x 20”
WEIGHT
DIMENSIONS
ROV Tooling 2017 / 37
SUCTION PILE INTERFACE STAB Seanic Ocean Systems manufactures an ROV friendly suction pile stab primarily used during the installation of suction piles. The stab is also available with a rubber flap seal option, eliminating the need for the additional hydraulic power used to iflate the bladder.
TECHNICAL SPECIFICATIONS SECURE MOORING AND ANCHOR
Our stabs can be outfitted with pressure sensors, providing more accurate feedback than gauges and reducing the risk of damage or costly pile collapse.
BUILT TO-ORDER
Our suction pile interface stabs are built to order, can be customized to any size, and are rigorously tested onshore to assure product quality and reliable performance at depth.
INFLATABLE SEAL
Seanic’s’ custom-engineered design features an optional inflatable seal to overcome common sealing problems associated with irregularly painted or corroded surfaces inside the stab interface of most suction piles. This provides a secure fit and the ability to tighten the O-ring in the event of rust or scale buildup.
MATERIALS
WHAT’S IN THE BOX
6061-T6 Aluminum body/handles Delrin nose piece 316 SS fittings
+ Spare Bladder
Buna-N rubber bladder
+ Gauge
Buna-N rubber solid seal is also available WEIGHT
45 lbs (air) 38 lbs (water)
DIMENSIONS
32 in L 13 in OD at handle
38 / ROV Tooling 2017
+ Operating & Maintenance Manual
VORTEX DREDGE KIT The most powerful 4 inch ROV and diver dredge in the world is available for rent. The Vortex has a removal rate performance more commonly seen in the 6 inch dredges. Vortex do not supply dredges as a combination jetter/dredge unit, with the belief that it is better to create the most powerful inlet suction and combine that with an actual high pressure jetter unit.
TECHNICAL SPECIFICATIONS SALVAGE/MARINE SCIENCE OPERATIONS
The low hydraulic consumption leaves enough hydraulic supply on most ROV’s to utilize a purpose built jetter unit for effective soil breakup.
WROV CONSTRUCTION AND DRILL SUPPORT
Environmental concerns are addressed through the high efficiency, low energy demand hydraulic system negating the need for external compensators.
4 IN TO 6 IN AVAILABLE
This is a completely modular system with many installation options for a variety of ROV’s. The true 4 inch performance with minimum 3.89 inch internal diameter reduces blockages and operates on a lower hydraulic flow.
WHAT’S IN THE BOX 19 gpm (minimum)
FLOW REQUIREMENTS
22 gpm (optimum)
2400 psi (minimum)
PRESSURE
4500 psi (maximum) 2800 psi (optimum)
+ www.vortexdredge.com
99 lbs / 45 kg (air)
WEIGHT
ROV Tooling 2017 / 39
MAG DRILL The drill is mounted to the metallic work site by energizing a lifting magnet using a hydraulic cylinder as the actuator. The powerful magnet holds the drill in place to perform precise cuts for the purposes of decommissioning, salvage, pinning, flooding or venting.
TECHNICAL SPECIFICATIONS HANDLES UP TO 6 IN DIAMETER CORE DRILL
Our Mag Drill is rated for 10,000 FSW and can easily cut holes into any flat or round steel structure with an annular cutter of up to 6 inches in diameter, at various depths-of-cut.
UP TO 4 1/4 IN HOLE DEPTH
This tool is custom engineered and built to meet customer specifications, and can be customized according to hole diameter and drill depth to suit project needs.
ATTACHES TO ROUND OR FLAT SURFACES
Seanic Ocean Systems designs and manufactures a Mag Drill that allows an ROV to attach a drill to any metallic subsea surface to cut holes of varying diameters.
WHAT’S IN THE BOX DRILLING
HYDRAULIC
6” (150mm) (3/4” shank) maximum diameter annular cutter Requires 3 open centered directional control valves (4 valves if using optional Slug Ejector function)
WEIGHT
201 lbs/91 kg (air) 171 lbs/77 kg (water)
40 / ROV Tooling 2017
+ Spare Annular Bits + Hoses + Spare Motor + Operating & Maintenance Manual
SUBSEA SAMPLE BOTTLE
ASSEMBLY
The Seanic Standard Sample Bottle system is a safe, simple and effective tool for gathering subsea samples. Custom configurations and interchangeable collection interfaces makes it the right choice for subsea sampling.
TECHNICAL SPECIFICATIONS CONFIGURABLE
The Subsea Sample Bottle Assembly is used to collect samples of gas bubbles/ fluid from on or near the sea floor.
SAFE AND EASY TO OPERATE
The Subsea Sample Bottle Assembly uses differential pressure to create a vacuum which will allow the gas bubbles/ fluid samples to be captured in the sample bottle subsea.
AVAILABLE FOR RENTAL OR SALE
The Subsea Sample Bottle Assembly is not intended to identify the cause of or source of the gas bubbles/ fluid at the operation site, only to collect samples in a safe and easy way for future analysis.
WHAT’S IN THE BOX + Sample Bottle Assembly + ROV Handle + Various Relief Valve Springs + Spare Funnel + Spare Flex Hose + Operating & Maintenance Manual
316 SS valve and fittings
MATERIALS
Aluminum sample bottle Flexible PVC collection tube Compressed gas: 77.7 cu-ft/2.2cu.m
BOTTLE CAPACITY
Water: 2.93 gal/11.1 L Pressure: 3000 psi
ROV Tooling 2017 / 41
DUAL FLUID HPU Seanic has designed and built a new Hydraulic Power Unit that is very unique. The use of a check ball pump and an electric motor was the difference between a standard oil HPU that can’t pump the Water Glycol and the air driven pumps usually used in this application.
TECHNICAL SPECIFICATIONS 3 STATIONS
The Dual Fluid HPU can deliver 10k and 5gpm of either water glycol or traditional mineral based oils.
EACH STATION HAS PRESSURE AND FLOW CONTROL
This unit was built to fill a demand for both hyperbaric chamber testing of ROV tooling as well as providing constant volume flow for high pressure water glycol applications.
SPECIFICATIONS
10,000 PSI @ 5 GPM 2-20 Gallon Reservoirs 4 Point Lifting Slings and Fork Pockets 230/460v/60Hz Electric Motor
DIMENSIONS
76 x 56 x 86 3800 lbs
42 / ROV Tooling 2017
WHAT’S IN THE BOX + Operating & Maintenance Manual
INTERVENTION PANEL Seanic Intervention Panels can be precision water jet cut from 316 L Stainless Steel or from Carbon Steel and painted with a 3 part epoxy process able to withstand long term subsea exposure.
TECHNICAL SPECIFICATIONS API/ISO COMPLIANT
All panels and components will be under API Guidance to ensure ROV friendliness.
SIMPLE, RUGGED, RELIABLE
Our staff has years of experience designing and building this equipment, providing you the confidence it will be done right the first time, every time.
CONFIGURABLE INTERFACE POINT FOR ROV
Seanic can custom design and manufacture ROV Intervention Panels per customer requirements. These can include Hot Stabs and Receptacles, ROV Torque Receptacles, Ball Valve Actuators and Gauges.
WHAT’S IN THE BOX 316L or Epoxy Coated Steel
+ Operating & Maintenance Manual
Varies According to Customer Requirements Hot Stab, Paddle Valve, Gauges, Torque Receptacles, LVOT Heads or Flying Leads
MATERIALS WEIGHTS & DIMENSIONS INTERFACE OPTIONS
ROV Tooling 2017 / 43
30 INCH SAW Seanic introduced the 30 inch saw to resolve cutting through a single jumper and eliminating concerns of aligning multiple cuts. The clamp design is retroactive, so all previously purchased 20 inch Super Grinders can be added to the clamp, and is easily removed for standalone applications. The clamp portion may be used with multiple Seanic Cutting Tools including both the 30 inch and 20 inch Super Grinders as well as other cutting and drilling accessories.
TECHNICAL SPECIFICATIONS STREAMLINE CLAMP DESIGN
Through this streamlined design, the 30 inch saw provides maximum cut depth with minimal clamping support.
ROV HANDLES FOR HORIZONTAL AND VERTICAL
The clamp design holds the grinder steady ensuring straight cut and preventing blade binding in both horizontal and vertical positions.
OPTIONAL SUPPORT SHOES
Diameter range is 12 inches to 18 inches OD with adapter shoes allowing diameters as small as 4 inches.
WEIGHT
345 lbs (air)
WHAT’S IN THE BOX
280 lbs (water) DIMENSIONS FEATURES
43”W x 27 1/4”D x 78”H Clamping range of 12-18” OD Maximum cut depth of 11 1/2”
DEPTH RATING HIGH TORQUE MOTOR MAX PRESSURE MAX FLOW
Infinite depth Provides 6,000 in-lb torque 3,000 psi 20 gpm
44 / ROV Tooling 2017
+ Spares Kit + Operating & Maintenance Manual
www.seanicusa.com
A Centurion Group company
SEANIC ENGINEERED SOLUTIONS
www.seanicusa.com
A Centurion Group company
ROV SHACKLE
CUSTOM-ENGINEERED
Seanic Ocean Systems designs and manufactures a variety of hydraulic ROV actuation kits for shackles ranging from 5-500 tons for the purpose of lowering or lifting heavy equipment to or from the sea floor without cutting lifting wires. ROV shackles adhere to DNV 2.7-1 standards to ensure compatibility for your subsea needs.
TECHNICAL SPECIFICATIONS WHAT’S IN THE BOX + Dummy Poly Stab + API 17H Hot Stabs (optional) + Hoses (optional) + Operating & Maintenance Manual
HYDRAULICALLY OPERATED
Constructed from an alloy steel and designed for simple operation through the use of an ROV manipulator, this tool enables an ROV to make or break shackle connections hydraulically when adding subsea hardware to a field, landing manifold or other subsea construction.
MECHANICAL OVERRIDE CAPACITY
Seanic’s actuation kits for shackles are built with a mechanical override capacity, in order to make or break shackles without the need for hydraulic power.
CUSTOMENGINEERED TO ORDER
Our ROV operable shackle conversions are custom-engineered according to customer specifications, and we have the ability to adapt any shackle to make it ROV-friendly.
WEIGHT (AIR)*
WEIGHT (WATER)*
DIMENSIONS*
360 lbs/163 kg
311 lbs/141 kg
50” x 14” x 25”
120T
984 lbs/446 kg
910 lbs/412 kg
64” x 14” x 30”
200T
1282 lbs/582 kg
1102 lbs/500 kg
74” x 19” x 36”
400T
*Weights and dimensions for example models shown. ROV shackles can be manufactured in sizes ranging from 5-450 T. Alloy steel; Stainless steel parts for hydraulic actuators
MATERIAL
Engineered Solutions 2017 / 47
FLEX JOINT CLEANING TOOL
ROV COMPATIBLE
The flex joint cleaning tool was designed to clamp around steel catenary risers with pipeline diameters ranging from 6 to 24 inches. The tool is operated by a Seanic technician through the use of a joystick and tooling computer with GUI interface inside the ROV control van.
TECHNICAL SPECIFICATIONS WORKCLASS ROV COMPATIBLE
The unique deployment system of the tool allows it to be used on any industry-recognized work class ROV.
INTERCHANGEABLE TOOL TRAYS
The tool is designed with interchangeable tool trays, which provide the option to work with various inspection cameras, lasers, temperature probes and cleaning tools.
RELIABLE CLEANING AND INSPECTION
The purpose of the tool is to thoroughly clean the underside of the flex joint by removing excessive marine growth from the elastomer, allowing for optimal inspection.
APPROX WEIGHT
800 lbs/363 kg (air)
WHAT’S IN THE BOX
~ 20 lbs/9 kg (water) HYDRAULIC REQUIREMENTS
MOVEMENT
10 gpm at 3000 psi
+ Operating & Maintenance Manual
Four Open-center Directional Control Valves
+ For information regarding what is packaged with this tool, please call Seanic.
Rotates 190⁰ to 260⁰ in either direction Brush pole moves up and down and tilts forward and backward to reach corners/ transition areas Transit tray moves pole closer to or away from the riser
48/ Engineered Solutions 2017
SEA CHEST COVERS
MULTIPLE SIZES
Seanic Ocean Systems has designed and manufactured ROV-installable Sea Chest Covers in a variety of sizes, used for UWILD and for marine maintenance activities on subsea platforms. During a UWILD the external hull must be cleaned and inspected, in addition to the replacement and/or repair of internal systems inside the hull.
TECHNICAL SPECIFICATIONS ROV-FRIENDLY
Seanic’s Sea Chest Covers are used to plug the open flange during inspection and maintenance campaigns. The Sea Chest Cover operation and functionality is imperative to the successful sealing o of the internal hull while personnel and equipment are inside performing the inspection and maintenance.
DEPENDABLE SEALING
The differential pressure at the sea chest flange provides a sealing mechanism allowing for the seal face of the Sea Chest Cover to stay in place and prevent seawater from entering into the sea chest flange. Clamping mechanisms on the sea chest covers provide additional security for the connection and sealing force. An internal bladder on the sea chest is inflated using a seawater injection pump providing an internal sealing element as a secondary measure to prevent any additional seawater from entering the hull in the event of a slow failure of the primary face seal.
EFFICIENT MARINE MAINTENANCE
The design of Seanic’s Sea Chest Covers is ROV friendly, and capable of being deployed and installed efficiently. Seanic’s API 17H FLOT and Class 1-4 torque tool is used to deploy and lock the Sea Chest Cover onto the sea chest flange.
Engineered Solutions 2017 / 49
UES PRODUCTS
www.seanicusa.com 50 / UES Products 2017
A Centurion Group company
Hydraulic Power Pack
MODEL: 22kW
GENERAL DESCRIPTION
UES Standard Electric HPU
Supplied mainly for use with our large range of underwater tools, but also suitable for other applications
Primary structure manufactured in accordance with DNV 2.7‐1
TECHNICAL SPECIFICATION
Max Flow
75 l/min @ 60Hz operation
Max Pressure
320 bar @ 35 l/min 60 Hz operation
Motor
22kW WEG 4 pole 3ph 380/440v 50/60Hz
Starter
Star Delta in SS enclosure
Filtration
MP Filtri pressure, return & drain
Cooler
Bowman seawater heat exchanger
Reservoir
200 litre, low oil & high temp trips
Frame
4 point lift in accordance with DNV 2.7‐1
Dimensions
1492 x 800 x 1615 mm
Weight
1,000 kg
Certification
Full certification package for MPI, slings, shackles & load test
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 51
ATEX Zone 1 Hydraulic Power Pack
MODEL: Z1 36kW
GENERAL DESCRIPTION
UES ATEX Zone 1 Electric Hydraulic Power Unit
Supplied mainly for use with our large range of underwater tools, but also suitable for other applications
Primary frame manufactured in accordance with DNV 2.7‐1
TECHNICAL SPECIFICATION
Max Flow
140 l/min @ 145bar, 60Hz operation
Max Pressure
320 bar @ 50 l/min 60 Hz operation
Motor
36kW WEG Ex II 2G EEx d IIB T4 4 pole 3ph 380/440v 50/60Hz
Starter
Star Delta in Ex II 2GD EEx d II B T5 enclosure
Filtration
Ikron pressure, return & drain
Cooler
Bowman seawater heat exchanger
Reservoir
300 litre, low oil & high temp trips
Frame
4 point lift in accordance with DNV 2.7‐1
Dimensions
1650 x 900 x 1870 mm H
Weight
1,500 kg
Certification
Full certification package for MPI, slings, shackles & load test
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
52Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Hydraulic Cut‐Off Saw
MODEL: C023
GENERAL DESCRIPTION
High powered saw designed for dimensional cutting of metal or masonry materials
Suitable for cutting concrete, structural steel and pipe
10” Abrasive, Diamond or TCT wheel can be fitted
Fitted with an adjustable shoe to allow alterations to cut depth
TECHNICAL SPECIFICATION
Capacity
10” Disc
Arbor
1”
Flow
38‐57 L/min
Pressure
105‐140 Bar
Weight
10.4kg
Length
495mm
Width
280mm
Porting
8 SAE
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 53
Hydraulic Shear Cutter
MODEL: CAT S80
GENERAL DESCRIPTION
Ideal for cutting pipe, flexible risers, cables & umbilical
Suitable for topside & subsea operations
TECHNICAL SPECIFICATION
Model
Caterpillar S 80
Jaw Opening Height
623 mm
Jaw Opening Depth
840 mm
Base of Jaws Height
525 mm
Max Flow
200 L/min
Max Pressure
350 Bar
Frame
4 point lift in accordance with DNV 2.7‐1
Dimensions
4800 x 1500 x 2400 mm H
Weight
6000 kg. 8000kg w/ frame
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
54Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
3.5Te Demag Peel Grab
GENERAL DESCRIPTION
Suitable for all coarse and bulky materials
Hydraulic arms are individually driven, thereby ensuring that even the bulkiest material is securely gripped
Designed to handle a variety of different bulk materials such as scrap, waste, rock, slag and logs
Grab can be operated from a standard HPU and powered Umbilical reel
TECHNICAL SPECIFICATION
Arm Capacity
0.8m3
Payload
3.5T
Weight
920 kg
No. of Arms
4
Pressure
200 bar
Height closed
1885 mm
Height open
1575 mm
Width closed
1610 mm
Width open
2420 mm
Tools supplied as standard with whips and Industry Standard ¾” Wing type Q.D. Couplings
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 55
Diver Torque Tool
MODELS: KIS17D4
GENERAL DESCRIPTION
Basic Rotary Torque Tool conforming to API 17D Class 1‐4
Robust, no frills tool operable by diver with a suitable hydraulic supply
Direction control valve is close mounted to the torque tool and cross line relief valves are incorporated to allow torque setting in both CW and CCW rotation
TECHNICAL SPECIFICATION
Interface
Class 1‐4
Max Torque
2,700 Nm
Speed
0 ‐ 20 rpm
Flow
0 – 25 l/min
Pressure
175 bar Max
Weight
26kg (in water)
Dimensions
675 x 220 x 300 mm H
Handle
Front and rear w/lift point
Porting
1/2” BSP
Tools may be supplied and used in conjunction with UES Torque Manifold and Torque Verification Unit. Supplied as standard c/w 1.5m whips and ¾” Q.D. Couplings
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
56Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Hydraulic Grinder
MODEL: GR29
GENERAL DESCRIPTION
Portable hand held tool, designed for use by a diver or ROV
Primarily used for grinding and cutting operations
Suitable with various discs; Abrasive, Diamond, and Polishing Discs
Can also be fitted with Wire & Nylon brushes
TECHNICAL SPECIFICATION
Capacity
7” or 9” Disc
Speed
2700 rpm
Arbor
5/8” UNC
Flow
15‐38 l/min
Optimum Flow
34 l/min
Pressure
70‐175 bar
Weight
6.8 kg
Length
230 mm
Width
230 mm
Porting
8 SAE
Tool supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 57
Hydraulic Reel
MODEL: HR300
GENERAL DESCRIPTION
Primarily used to deploy hoses, cables & umbilicals for subsea operations
Can be fitted with a twin flow rotary union to power subsea hydraulic tools
TECHNICAL SPECIFICATION
Capacity
300 m Twin Hose Umbilical
Max Pull
1000 kg
Flow
15 – 60 l/min
Pressure
200 bar
Connection
6 m hoses c/w Q.D. Couplings
Drum Dimensions
Core
800 mm
Flange
350 mm
Width
800 mm
Dimensions
Length
1770 mm
Width
1770 mm
Weight
1500 kg Tare, 3000 kg Gross
Certification
Full certification package for hose test, MPI, slings, shackles & load test
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
58Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
5Te Peel Grab
GENERAL DESCRIPTION
Suitable for all coarse and bulky materials
Hydraulic arms are individually driven, thereby ensuring that even the bulkiest material is securely gripped
Designed to handle a variety of different bulk materials such as scrap, waste, rock, slag and logs
Grab can be operated from a standard HPU and powered Umbilical reel
TECHNICAL SPECIFICATION
Arm Capacity
0.2m3
Payload
5T
Weight
600 kg
No. of Arms
5
Pressure
200 bar
Height closed
1500 mm
Height open
1280 mm
Width closed
900 mm
Width open
1500 mm
Tools supplied as standard with whips and Industry Standard ¾” Wing type Q.D. Couplings
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 59
Hydraulic Peanut Grinder
MODEL: PG04
GENERAL DESCRIPTION
Portable hand held tool, designed for diver use
Primarily used for grinding weld seams and de‐burring holes in steel work
Can additionally be fitted with rotary wire brushes and a variety of abrasive and polishing discs
Can also be adapted for ROV application
TECHNICAL SPECIFICATION
Speed
9450 rpm
Arbor
6 mm Collet
Flow
15‐40 l/min
Pressure
70‐175 bar
Weight
4 kg
Length
350 mm
Width Nose
65 mm
Width Body
91 mm
Porting
8 SAE
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings.
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
60Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Wire Rope Cutter
MODEL: RCV75HD
GENERAL DESCRIPTION
Heavy duty wire cutter designed for use in severe working conditions
Hydraulically operated anvil for easy ROV deployment
Lightweight aluminium construction
Integrated interlock ensures that the blade cannot activate until the anvil is fully deployed
Long life blade ensures that tool maintenance is kept to a minimum
Integrated hydraulic intensifier and internal relief valve
TECHNICAL SPECIFICATION
Cutting Capacity (Wire Rope)
75 mm Dia. & 1960 N/mm2 grade
Water Depth
Any
Max Input Pressure
210 bar
Weight Approx.
43 kg
Height
517 mm
Width
176 mm
Length
390 mm (max, anvil out)
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 61
Wire Rope Cutter
MODEL: RCV115
GENERAL DESCRIPTION
Heavy duty wire cutter designed for use in severe working conditions
Hydraulically operated anvil for easy ROV deployment
Robust plated steel and stainless steel construction
All steel components are electroless nickel plated to resist corrosion
Long life blade ensures that tool maintenance is kept to a minimum
Suitable for wire rope, cables and umbilicals
Optional intensifier panel is available
TECHNICAL SPECIFICATION
Cutting Capacity (Wire Rope)
115 mm Dia. & 1770 N/mm2 grade
Water Depth
Any
Max Input Pressure Main Cylinder
690 bar
Max Input Pressure Anvil
210 bar
Height
703 mm
Width
252 mm
Max Length (Anvil Out)
514 mm
Weight (Approx)
125 kg
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
62Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Wire Rope Cutter
MODEL: RCV155
GENERAL DESCRIPTION
Heavy duty wire cutter designed for use in severe working conditions
Hydraulically operated anvil for easy ROV deployment
Robust plated steel and stainless steel construction
All steel components are electroless nickel plated to resist corrosion
Long life blade ensures that tool maintenance is kept to a minimum
Suitable for cutting wire rope, cables & umbilical
Optional intensifier panel is available
TECHNICAL SPECIFICATION
Cutting Capacity (Wire Rope)
155 mm Dia. & 1880 N/mm2 grade
Water Depth
Any
Max Input Pressure Main Cylinder
690 bar
Max Input Pressure Anvil
210 bar
Height
867 mm
Width
277 mm
Length (Max)
592 mm
Weight (Approx)
240 kg
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 63
ROV Chain Caliper MK3
GENERAL DESCRIPTION
Unique hydraulically controlled chain caliper, designed to measure one chain link length.
Lightweight aluminium construction mounted with sheet buoyancy. Supplied complete with digital displacement readout.
Features an adjustable fixed arm, and a range of dynamic arm options, offering a 200mm measurement range for chain link lengths of 600 to 1100mm.
Vertical members of the tool engage over the link diameters first, up to a 180mm max. chain diameter. A range of horse shoe pads can be supplied to engage against smaller diameter chain.
TECHNICAL SPECIFICATION
Range
600-1100 mm (200mm increments)
Tool Accuracy
+/- 0.3 mm
Max. Chain Dia.
180 mm
Weight in Air
42 kg
ROV Handle
Fish tail and flex joint
Max Pressure
30 bar
Max Force
0.4 Te
Hydraulic Interface
4m hose c/w 4JIC ends (alternative end fittings AOR).
Instrument Interface
Supplied with Micro Subconn c/w voltage network
UES Ltd. can also supply a range of Go NoGo Gauges for reference chain diameter & interlink measurement, please contact us to discuss your requirements.
ATR EQUIPMENT SOLUTIONS
ATR LIFTING SOLUTIONS
ATR MARINE SOLUTIONS
ATR POWER SOLUTIONS
+44 (0)1224 222777 equipment@atrgroup.co.uk
+44 (0)1224 826662 lifting@atrgroup.co.uk
+44 (0)1224 826662 marine@atrgroup.co.uk
+44 (0)1224 775050 power@atrgroup.co.uk
Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL 64Underwater / UES Engineering Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Subsea Drill Rig MODEL: SDR100
GENERAL DESCRIPTION
Ideal for drilling holes of up to 100mm diameter in steel structures
Easily adapted to mount onto steel beams and tubular members
Can be secured via clamps, straps or magnets, with various bases to suit a range of applications
Fitted with manual down‐feed and has a spring‐centred control valve for added operator safety
TECHNICAL SPECIFICATION
Capacity
100 mm Dia
Speed
50‐250 rpm
Arbor
¾” Dia
Flow
0‐35 l/min
Pressure
70‐175 bar
Length
440 mm
Width
230 mm
Height
540 mm
Porting
½” BSP
Weight
25kg
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings.
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 65
Softline Cutter
MODEL: SL55
GENERAL DESCRIPTION
Compact & lightweight tool designed to cut soft lines, polypropylene and fibre ropes
Utilises a low pressure supply from the vehicle, eliminating the need for a high pressure intensifier
Constructed from stainless steel and coated alloys to provide the optimum level of light weight and corrosion resistance
TECHNICAL SPECIFICATION
Capacity
54 mm Dia
Pressure
210 bar
Weight
4.52 kg
Length
410 mm
Width
150 mm
Depth
44 mm
Porting
¼” BSP
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
66Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Softline Cutter
MODEL: SL80
GENERAL DESCRIPTION
Heavy duty hydraulically operated soft and fibre line cutting tool
Lightweight aluminum & stainless steel construction
Diver or ROV operable design
Available with detachable handle kit
TECHNICAL SPECIFICATION
Capacity
80 mm Dia
Pressure
690 bar
Weight
14.2 kg
Length
647 mm
Width
188 mm
Depth
138 mm
Porting
¼” BSP
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 67
Spitznas Angle Grinder
MODEL: 5” AG
GENERAL DESCRIPTION
Portable, handheld tool for diver use
Ideal for use in tight spaces
Can be adapted for ROV application
TECHNICAL SPECIFICATION
Operating Pressure
90‐140 Bar
Working Pressure
90 Bar
Capacity
1.8 kW
Displacement
20‐50 l/min
Free Speed
5500 ± 5% U/min
Peripheral Speed Max
52.2 m/s
Max Disc Size
180mm
Holder and Thread
22.2mm Dia. M14
Dimensions
570 x 250 x 150 mm
Weight (without holder & protecting disc)
6.7 kg
Weight (total)
7.6 kg
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
68Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Hydraulic Recip Saw
MODEL: Spitznas
GENERAL DESCRIPTION
An alternative to rotary disc cutters, suitable for a variety of materials
Various pitch and length of blades can be offered depending on the hardness & size of the material
Pipe clamps and other purpose built clamps can be supplied to aid cutting operations
Twist & lever throttle options available
TECHNICAL SPECIFICATION
Capacity
290mm Dia
Power
2.8Kw
Flow
15‐50 l/min
Pressure
140 bar
Strokes/min
350
Stroke
60 mm
Weight
6.1 kg
Length
600 mm
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 69
Hydraulic Breakers
MODEL: BR45 & BR67
GENERAL DESCRIPTION
Medium to heavy‐duty breaker
Ideal for breaking concrete and small rocks, rod diving and tamping
Well balanced tool for minimum operator fatigue
Trouble‐free diaphragm accumulator provides added punch and reduced coil
Feathering on/off valve to control speed makes startup and initial tool placement more reliable
A variety of breaker points available; flat, moil & spade.
TECHNICAL SPECIFICATION
BR45
BR67
Capacity
1 in Hex Parallel
6” x 1 ¼” Hex
Weight
25 kg
30 kg
Length
65 cm
68 cm
Width
36 cm
40 cm
Pressure
105‐140 bar
105‐140 bar
Max Back Pressure
17 bar
17 bar
Flow Range
26‐34 l/m
26‐34 l/m
Optimum Flow
30 l/m
30 l/m
Porting
8 SAE
8 SAE
Output
1800 Blows/min
1800 Blows/Min
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings.
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
70Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Stanley Chipping Hammer MODEL: CH15
GENERAL DESCRIPTION
Portable hydraulic chipping hammer
Ideal for chipping concrete, rock, masonry or coral
Compact, lightweight and powerful with a shock & heat insulated body
TECHNICAL SPECIFICATION
Capacity
0.58” x 2 ½” shank steel bits
Flow
26‐34 l/min
Pressure
70‐140 bar
Weight
7.25 kg
Length
430mm
Width
80mm
Porting
8 SAE
Tool Steels
Wide chisel, Moil point, Flat chisel
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 71
Stanley Hydraulic Drill
MODEL: DL07
GENERAL DESCRIPTION
Powerful, lightweight, portable hydraulic drill completely sealed for underwater operation
The drill features a reverse facility
Compatible with a range of drill bits up to 18mm Dia.
Fitted with a trigger guard and a dual position assist handle
TECHNICAL SPECIFICATION
Capacity
½” Chuck
Speed
350‐1500 rpm
Torque
27 Nm
Flow
15‐45 l/min
Pressure
70‐140 bar
Weight
3.6 kg
Length
230 mm
Width
100 mm
Porting
8 SAE
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
72Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Hydraulic Impact Wrench
MODEL: IW12
GENERAL DESCRIPTION
Hand held tool designed for use by a diver or ROV
Provides exceptional output torque from a compact & lightweight tool
TECHNICAL SPECIFICATION
Capacity
¾” Square Drive
Torque
340‐1630 Nm
Flow
15‐45 l/min
Optimum Flow
30 l/min
Pressure
70‐140 Bar
Weight
6 kg
Length
240 mm
Width
102 mm
Porting
8 SAE
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 73
Hydraulic Impact Wrench
MODEL: IW16
GENERAL DESCRIPTION
Hand held tool designed for use by a diver or ROV
Provides exceptional output torque from a compact & lightweight tool
TECHNICAL SPECIFICATION
Capacity
1” Square Drive
Torque
680‐3400 Nm
Flow
25‐45 l/min
Optimum Flow
30 l/min
Pressure
105‐140 Bar
Weight
12 kg
Length
370 mm
Width
110 mm
Porting
8 SAE
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
74Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Subsea Torque Verification Unit MODEL: Subsea TVU
GENERAL DESCRIPTION
Used to confirm operational output from any Rotary Torque Tool conforming to API 17D Class 1‐4 or 17H Hi‐ Torque
Consists of high accuracy torque transducer mounted within a standard Class 1‐4 or Hi‐Torque receptacle
Electronic output from this unit is fed to a 5 digit LED hi visibility display
Rugged housing deep water rated (3000m)
TECHNICAL SPECIFICATION
Interface
API 17D Class 1‐4 or API 17H Hi‐Torque
Max Torque
2,700 Nm
Input Adaptors: Class 1 & 2
17.5 mm Square
Class 3
28.6 mm Square
Class 4
38.1 mm Square
17 H
35.0 mm Square
Weight
37 kg
Length
370 mm
Width
500 mm
Height
550 mm
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 75
Twin Disc Cutter
MODEL: TDC125
GENERAL DESCRIPTION
Diver or ROV operable
Specifically designed to cut large diameter cable, hauser, wire rope and other materials with ease
Twin discs result in reduced cutting times, increased disc life and safe operation
TECHNICAL SPECIFICATION
Max Cut Dia.
125 mm
Max Speed
4000 rpm
Flow
34 l/min
Pressure
210 bar
Weight
14.7 kg
Length
550 mm
Width
500 mm
Depth
250 mm
Mounting
‘T’ bar or Fishtail
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
76Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Turns Count & Torque Readout MODELS: TC1 & TC2
GENERAL DESCRIPTION
Used in conjunction with a UES Torque Tool and displays the number of turns +/‐ made by the Torque Tool output drive socket, and in addition TC2 displays output torque
Stand‐alone units, and installation does not require complex control system or datalink
Inbuilt light sensors actuate the display when illuminated by ROV or diver light, allowing the instrument to lay dormant when not required, increasing battery life
TECHNICAL SPECIFICATION
Display
5 Digit (14mm) LED +/‐ 999.9
Depth Rating
3,000 m
Battery
Rechargeable NiMh D cell
Activation
Light sensor
Count reset
Magnetic reed switch
Length
200 mm
Width
80 mm
Body Dia.
50 mm
Weight
1.6 kg (Air), 1.1 kg (Water)
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 77
Hydraulic Cutter
MODEL: UHC38
GENERAL DESCRIPTION
Hydraulic, double acting anvil cutter suitable for cutting wire rope, cables & hoses
Target material is placed in the open jaw of the cutter
Hydraulic pressure supplied from a separate source (ROV or deck HP Pack)
Capable of supplying pressure up to 700 bar, with a 0.5 l/min flow applied to complete the cutting operation
TECHNICAL SPECIFICATION
Max Cutting Capacity
38 mm
Wire Rope
38 mm
Height
327 mm
Width
100 mm
Depth
130 mm
Cyl. OD
82 mm
Operating Pressure
700 bar
Swept Volume
145 cc
Approx. Weight
15.2 kg
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
78Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Hydraulic Cutter
MODEL: UHC80
GENERAL DESCRIPTION
Hydraulic, double acting anvil cutter suitable for cutting wire rope, cables & hoses
Target material is placed in the jaw of the cutter and the anvil pin Is then inserted, retaining the material
Hydraulic pressure is supplied from a separate source, typically a deck mounted HPU
A supply pressure of 700 bar and flow of 0.5 l/min is applied to complete the cutting operation
TECHNICAL SPECIFICATION
Operating Pressure
700 bar
Max Cutting Capacity
Ø80 mm
Wire Rope
Ø75 mm
Swept Volume
510 cc
Approx Weight
42 kg
Length
416 mm
Outer Diameter
174 mm
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 79
10Te Vantec Grab
GENERAL DESCRIPTION
Suitable for all coarse and bulky materials
Hydraulic arms are individually driven, thereby ensuring that even the bulkiest material is securely gripped
Designed to handle a variety of different bulk materials such as scrap, waste, rock, slag and logs
Grab can be operated from a standard HPU and powered Umbilical reel
TECHNICAL SPECIFICATION
Arm Capacity
3.0m3
Payload
10,000 kg
Weight
3,800 kg
No. of Arms
6
Pressure
200 bar
Flow
40‐80 l/min
Height open
2700 mm
Height closed
3360 mm
Width open
4180 mm
Width closed
2360 mm
Tools supplied as standard with whips and Industry Standard ¾” Wing type Q.D. Couplings
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
80Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Hydraulic Shear Cutter
MODEL: VHS60
GENERAL DESCRIPTION
Ideal for cutting pipe, flexible risers, cables & umbilical
Suitable for topside and subsea operations
TECHNICAL SPECIFICATION
Model
Verachtert VSHS60
Jaw Opening Height
800 mm
Jaw Opening Depth
830 mm
Base of Jaws Height
718 mm
Max Closing Force
9850 kN
Optimum Flow
400 l/min
Max Pressure
350 bar
Frame
4 point lift in accordance with DNV 2.7‐1
Dimensions
4780 x 1500 x 1912 mm H
Weight
6500 kg
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 81
12 Te Tensioner
GENERAL DESCRIPTION
Purpose built to provide a constant tension capability with up to a 12 Ton maximum back tension
Correct spooling procedures prolongs life of umbilical and reduces risk of damage during operations
Operated from a control panel mounted on the unit
Power is supplied from a Hatz Silent Pack diesel engine making the tensioner a standalone system
TECHNICAL SPECIFICATION
Max Back Tension
12T
Max Line Speed
20 m/min
Drum Size
1800 OD x 500 mm Wide
Hydraulic Power Unit
Hatz 44.1kW Diesel, Tandum Dowty Gear Pumps, Air Blast & Seawater Coolers
Controls
Local Directional Control Valve & Tension Control Circuit
Operating Monitoring
Digital Readouts for Cable Tension, Speed & Length
Frame
Welded Universal Column skid, c/w lift points, fork pockets and tiedown weld plates
Overall Dimensions
4000 x 2000 x 2350 mm H
Weight
7500 kg
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
82Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Accumulator ER System MODEL: AER75
GENERAL DESCRIPTION
Designed to provide hydraulic power and control for Hydraulic Cutter during “Black Ship” situations
Quickly and effectively supplies power up to 630 bar to operate release mechanisms
Features built in 7.5 kW HPU
75L accumulator capacity
TECHNICAL SPECIFICATION
Electrical Supply
7.5 kW, 440 V
Accumulator Capacity
75 litres
Charge Pressure
300 bar
Intensifier Ratio
4:1
Max Outlet Pressure
630 bar
Length
1226 mm
Width
1020 mm
Height
1510 mm
Weight
900 kg Gross
ATR EQUIPMENT SOLUTIONS
ATR LIFTING SOLUTIONS
ATR POWER SOLUTIONS
+44 (0)1224 222777 equipment@atrgroup.co.uk
+44 (0)1224 826662 lifting@atrgroup.co.uk
+44 (0)1224 775050 power@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
SAFETY & TECHNICAL HYDRAULICS LIMITED +44 (0)1224 781555 sales@sthyd.com
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 83
Hydraulic A‐Frame
GENERAL DESCRIPTION
UES Hydraulic Powered A‐Frame
Configured to suit a variety of applications depending on requirements
Complete with integrated control panel
Full deployment package with HPU & Winches available on request
TECHNICAL SPECIFICATIONS
SWL
4000kg
Approx. Weight
2500kg
Approx. Dimensions Length
4700mm
Width
2200mm
Height (stored)
2900mm
Height (max)
4300mm
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
84Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Hydraulic Power Pack
MODEL: Hatz 45kW
GENERAL DESCRIPTION
Diesel hydraulic power pack
Supplied mainly for use with our large range of underwater tools, also suitable for other applications
TECHNICAL SPECIFICATION
Max Flow
130 l/min @ 1800 rpm 145 l/min @ 2000 rpm
Max Pressure
320 bar
Pump
Kawasaki K3VL80/B‐1NRKM‐P0/1‐H4 80cc/rev variable displacement, pressure and torque control
Motor
Hatz –M4L air cooled diesel 1500/2000 rpm
Starter
12v Electric
Filtration
MP Filtri pressure, Stauff return & suction
Cooler
Bowman seawater heat exchanger
Reservoir
300 litre, level temperature gauge
Fuel Tank
200 litre (244g/kWh @ 50% consumption)
Frame
Steel channel base, box section corner posts, 4 point lift
Dimensions
1900 x 1000 x 1400 mm h
Weight
1800 kg wet
Certification
Full certification package for MPI, slings, shackles & load test
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 85
ROV Sheave
MODEL: DS780‐10
GENERAL DESCRIPTION
Designed for the safe over‐boarding of cables, hoses & umbilicals
Standard design incorporates top rollers to ensure that the product is securely captured within the sheave
Support frame available for deck installation
TECHNICAL SPECIFICATION
Line Pull
10,000 kg
Bend Radius
780 mm
Max Diameter
50 mm
Height Diameter
1610 mm
Radius To Inner Sheave
780 mm
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
2097 mm
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
86Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Electric Powered Reel
MODEL: HR300E
GENERAL DESCRIPTION
Primarily used to deploy air, hydraulic or Broco service umbilicals for subsea operations
If required, can be fitted with a twin flow rotary union or electrical slipring
Inverter controlled electrical drive provides a step‐less variable speed operation
TECHNICAL SPECIFICATION
Capacity
300 m Twin Hose Umbilical
Max Pull
750 kg – (600kg) continuous
Line Speed
20 m/min
Drive
5 kW Inverter Drive
Supply
415/440 V, 50/60Hz
Drum Dimensions
Core
800 mm
Flange
350 mm
Width
800 mm
Dimensions
Length
1770 mm
Width
1770 mm
Weight
1500 kg Tare, 3000 kg Gross
Control
Manual Joystick
Certification
Full certification package for hose test, MPI, slings, shackles and load test
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 87
Hydraulic Hole Punch
MODEL: HD07
GENERAL DESCRIPTION
Ideal for subsea use to make holes for bolts & shackles in shape steel, flat plates etc.
Provides a safe, diver friendly alternative to drilling holes
TECHNICAL SPECIFICATION
Operating Pressure
700 bar
Max Throat Depth
70 mm
Max Punching Thickness
16 mm Mild Steel 6 mm Stainless Steel
Max Punching Diameter
24 mm
Hole Marking Time
11.8 Seconds
Allowable Max Pressure
68.65 MPa (700kgf/cm2)
Max Output
464 kN (47tF)
Ram Stroke
25 mm
Mass (Weight)
25.5 kg
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
88Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Hydraulic Cutter
MODEL: HGC200
GENERAL DESCRIPTION
Portable cutter, ideal for steel sections, power cables and umbilical
Designed for use on deck or subsea
Powered directly from a high pressure power pack or from a pressure intensifier
Ideal for rapid abandonment cutting (DP Run‐off) when used with a UES Accumulator package
TECHNICAL SPECIFICATION
Cutting Force
220 Te
Working Pressure
700 Bar
Max Blade Opening
205mm
Dimensions
677 x 264 x 1015mm
Weight
300kg
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 89
HPU & Reel GENERAL DESCRIPTION
Hydraulic deployment reel featuring built in 15kW Hydraulic Power Unit
Primarily used for deployment of hoses, cables & umbilicals for subsea operations
Can be fitted with twin flow rotary union to power subsea hydraulic tooling, using built in HPU
TECHNICAL SPECIFICATION
Capacity
300m Twin Tooling Umbilical
Max Pull
1000 kg
Flow
15-60 l/min
Pressure
200 bar
Drum Core Dia.
800mm
Drum Flange Dia.
1500mm
Drum Width
800mm
HPU Motor
15kW Motor WEG 4 pole, 3ph, 380/440v 50/60Hz Motor
Starter
Star Delta in SS Enclosure
Cooler
Bowman Seawater Heat Exchanger
Reservoir
200 L, low oil & high temp trips
Frame
Welded steel channel skid, box section protection frame, c/w forklift pockets, tie-down plates & 4 point lift in accordance with DNV 2.7-1
Frame Dimensions
1770 x 1770 x 1880(H) mm
Weight
~ 3700kg (Gross)
Certification
Full certification package for MPI, slings, shackles, load test & hosing supplied as standard
ATR EQUIPMENT SOLUTIONS
ATR LIFTING SOLUTIONS
ATR MARINE SOLUTIONS
ATR POWER SOLUTIONS
+44 (0)1224 222777 equipment@atrgroup.co.uk
+44 (0)1224 826662 lifting@atrgroup.co.uk
+44 (0)1224 826662 marine@atrgroup.co.uk
+44 (0)1224 775050 power@atrgroup.co.uk
Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL 90Underwater / UES Engineering Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Husqvarna Cut Off Saw MODEL: K2500
GENERAL DESCRIPTION
Portable hand held tool
Lightweight, powerful and easy to manoeuvre, ensuring ease of operation
Can be used with Diamond or Abrasive discs
TECHNICAL SPECIFICATION
Speed
4300 rpm
Power
5.2 kW
Disc Size
400 mm
Disc Type
Diamond or Abrasive
Cutting Depth
145 mm
Flow
35‐42 l/min
Pressure
130‐140 bar
Weight
8.3 kg
Length
770 mm
Width
175 mm
Porting
¼” BSP
Tool supplied as standard with 1.5m whips and S/S fittings
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 91
Intensifier Panel
MODEL: HP690A40
GENERAL DESCRIPTION
Uses industry standard MiniBooster intensifier and is of a robust compact design for easy installation into an ROV
Fitted with an integrated safety circuit that automatically bleeds excess pressure, due to temperature or depth variations, back to tank
Inlet and Outlet pressures can be accurately monitored and the outlet is fitted with a factory set relief valve for added safety
TECHNICAL SPECIFICATION
Max Outlet
690 Bar
2 LPM
Max Input
172 Bar
14 LPM
Intensifier Ratio
4:1
Water Depth
Any
Dimensions
252 x 153 x 144 mm
Weight in air
10 kg
Weight in water
7 kg
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
92Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Drum Spooler
GENERAL DESCRIPTION
Suitable for spooling wire/umbilical bundles onto winches and cranes under tension
Up to 3T back tension
Integrated diesel hydraulic power unit
May also be used to spool onto storage drums
TECHNICAL SPECIFICATION
Max Drum Capacity
3200 mm
Max Drum Dia.
2500 mm
Max Drum Width
30 te
Max Payload
Max Drum Torque
36kNm
Max Back Tension
3T
Shaft Size
120 mm Dia.
Integral HPU
Perkins Diesel, David Brown Pump, Pall Pressure Filter, Air Blast & Seawater Coolers. 210 bar, 80 l/min
Controls
Directional Control Valve, Tension Control Circuit, Optional Spooler Guide Frame control circuit
Frame
Welded Universal Column skid, c/w lift points, fork pockets and tiedown weld plates
Overall Dimensions
5000 x 2400 x 2110 mm H
Weight
7000 kg
Certification
Full certification package is supplied for the unit, in accordance with all current legislative standards
(3350 mm H drum filled)
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 93
Large Hydraulic Reel MODEL: Hagglund
GENERAL DESCRIPTION
Suitable for handling hose umbilical bundles and cables for many applications
Drum can be split to allow installation of various bundles
TECHNICAL SPECIFICATION
Drum Dimensions
Core 1067 mm Dia. Flange 2275 mm Dia. Drum Width 1650 mm
Hydraulics
Max Pressure 210 bar Flow up to 80 l/min (7rpm)
Max Line Pull
5000 kg
Motor/Brake
Hagglund, 11084cc/rev, HD62‐111000‐A0‐R0‐00‐00
Control
Walvoil SD 18/2 Motor Spool spring centred. Relief valve set to 110 bar (3te)
Rotary Union
Optional – Slew ring bearing 340 mm ID
Couplings
Supply & Return 1” Parker 61 Series, Drain ½” ISO7241B
Frame
Welded steel Channel skid, Box section top lifting frame – Pad eyes x 4
Dimensions
3100 x 2450 x 2700 mm H
Weight
6500 kg Tare, 10,000kg Gross
Certification
Full certification package for hose test, MPI, slings, shackles & load test
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
94Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Magnum Core Drill
MODELS: 5, 10 & 15
GENERAL DESCRIPTION
Hand held drill provides unrivalled power for both wet and dry diamond drilling applications
Built in torque limiting valve results in little or no kickback or snatch
TECHNICAL SPECIFICATION
Capacity
100 mm Dia.
Flow
20 l/min
Working Pressure
140 Bar
Operating Speed
Mag 5 – 600 rpm Mag 10 – 1000 rpm Mag 15 – 1500 rpm
Weight
8 kg (without core bit)
Length
410 mm (without core bit)
Noise Level
83 dB Free running at 1m
Core bit connection
½” BSP Female
Options
Water Flush Swivel
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 95
Marine Cleaning Tool
MODELS: MC212
GENERAL DESCRIPTION
Diver operated twin brush cleaning tool
Unique design means it is equally efficient on both tubular and flat surfaces
A wide variety of brushes are available to cater for different types of marine growth
Can be configured for ROV application
TECHNICAL SPECIFICATION
Flow
40 l/min
Pressure
140 bar
Weight in Air
23 kg
Weight in Water
1 kg Buoyant
Depth Rating
70 m
Min. tube Dia.
450 mm
Dimensions
800 x 450 x 250 mm H
Max Brush Dia.
300 mm
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
96Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Melcal Marine Crane
MODEL: FL35T5
GENERAL DESCRIPTION
Ideal for installation on deck, on offshore vessels and platforms
Driven by an electro‐hydraulic power unit
Compact design, mounted on a dedicated subframe grillage
Designed and manufactured in accordance with Lloyd’s lifting appliances in a marine environment
TECHNICAL SPECIFICATION
Capacity
1.28Te at 14.5m
Hydraulic Reach
14.5m
Length Stowed
2.95m
Height Stowed
3.01m
Base Footprint
2.43m x 2.43m
Winch
2 Te
Max Reach
14.5m @ 1.25Te
Controls
Local & Radio Remote
Hydraulic Power
37kW, 270 bar
Slewing Angle
Continuous
Weight
6000kg
Certification
Full certification package for MPI, slings, shackles, load and pull test
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 97
Roller Chute
MODEL: RC700
GENERAL DESCRIPTION
Designed for the safe over‐boarding of cables, hoses & umbilical
TECHNICAL SPECIFICATION
Radius
700mm
Load Capacity
3000kg
Length
1310mm
Width
405 B/Flanges
Weight
600kg
Mounting
Weld Plates
Certification
Full certification package provided
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
98Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Roller Sheave
MODEL: RDS 808‐2
GENERAL DESCRIPTION
Designed for the safe overboarding of cables, hoses and umbilical
TECHNICAL SPECIFICATION
Line Pull
2000 kg
Bend Radius
800 mm
Max Diameter
80 mm
Sheave Length
1567 mm
Sheave Height
828 mm
Sheave Thickness
218 mm
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 99
Dirty Work Pack GENERAL DESCRIPTION
•
Dirty work pack base unit housing a Dynaset 520
•
Entirely flexible configuration, options include : 5 station 485 solenoid valve pack 3 Station pilot operated valve pack Internal or external comps
TECHNICAL SPECIFICATION
Hydraulic Supply
30 l/min at 520 bar max
Accumulator Capacity
P.O.A.
Output Pressure
520 bar max
Max output flow
30 l/pm
Frame
All stainless assembly
Dimensions
804 x 600 x 200
Weight
26 kg , buoyancy available
Certification
Full certification package for hose test, MPI, slings, shackles and load test
ATR EQUIPMENT SOLUTIONS
ATR LIFTING SOLUTIONS
ATR MARINE SOLUTIONS
ATR POWER SOLUTIONS
+44 (0)1224 222777 equipment@atrgroup.co.uk
+44 (0)1224 826662 lifting@atrgroup.co.uk
+44 (0)1224 826662 marine@atrgroup.co.uk
+44 (0)1224 775050 power@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL 100 / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Hydraulic Winches
MODEL: SONAR WINCH
GENERAL DESCRIPTION
Suitable for handling ropes and cables for many applications
Max cable diameter 30mm
Complete with integrated Hydraulic Power Unit
TECHNICAL SPECIFICATION
Drum Dimensions
508mm Dia. Core 760mm Dia. Flange 1036mm Width 55kW Electric; 380/415/440v ph3 50/60Hz 4 pole, WDF250MH Vickers Hydraulic Pump, PVH98QIC‐RSF‐IS‐10‐C25V‐31 Reservoir capacity – 360 litres Working Pressure 250 bar. Flow setting – 120 l/min (Max. Flow 135 l/min)
HPU
Max Line Pull
3000kg Bare Drum
Winch Drive Motor
Volvo, F12‐030‐MF‐CHC Motor displacement – 30cc/rev
Brake/Gearbox
Brevini CTD3150
Control
Danfoss PVG120 (Optional remote control)
Spooling Adjustment
9.4mm‐25mm Diameter, plc control
Frame
Welded steel Channel skid, Box section top lifting frame – Pad eyes x 4
Dimensions
2000 x 1600 x 1550 mm H
Weight
3000kg Tare, 5000kg Gross
Certification
Full certification package for hose test, MPI, slings, shackles and load test
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 101
ROV TP03 Trash Pump
MODELS: TP03
GENERAL DESCRIPTION
3” NB suction dredge utilizing the lightweight efficient TP03 Trash Pump as its motive power
Capable of moving large volumes of liquid with concentrations of solids up to 25% running from a typical ROV hydraulic supply
Optional jetting lance can be used in difficult soil conditions to fluidise the material and make it easier to dredge
Can be adapted for diver operation
TECHNICAL SPECIFICATION
Pump Flow
1688 LPM water
Pump Connections
4” Camlok Discharge, 3” Camlok Suction c/w Heliflex Hoses & ROV Suction Head
Hydraulic Connections
8JIC Supply & Return 4JIC Pilot
Inlet Flow
Up to 3” solids
27 l/min
Inlet Pressure
210 bar Max
Dimensions
450 x 450 x 320 mm H
Weight
30kg (in Air)
Tools supplied as standard with 3m Suction and Discharge hoses and 3m whips w/ JIC connections
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL 102 / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
Hydraulic Winches
MODEL: 15Te Zollern Winch
GENERAL DESCRIPTION
Suitable for pulling loads of up to 15Te
Wire capacity of 250m
Powered from an independent Hydrualic Power Unit
TECHNICAL SPECIFICATION
Manufacturer
Zollern
Model
ZHP 4.29
Max Line Pull
15Te on layer 6
Line speed:
0‐14 m/min
Drum Dimensions
672mm Core Dia. 1120mm Flange Dia. 530mm Drum Width
Wire Capacity
250m x 32mm
Hydraulic Supply
150 l/min @ 250 bar Max
Control
Local directional & tension control
Brakes
Dual Failsafe Mult‐disc Brake
Hydraulic Motors
2 off SAI GM1‐250 Radial Piston
Dimensions
1426 x 1230 x 1165mm H
Weight
3500kg Tare, 4500kg Gross
ATR EQUIPMENT SOLUTIONS +44 (0)1224 222777 equipment@atrgroup.co.uk
ATR LIFTING SOLUTIONS +44 (0)1224 826662 lifting@atrgroup.co.uk
ATR MARINE SOLUTIONS +44 (0)1224 826662 marine@atrgroup.co.uk
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
ATR POWER SOLUTIONS +44 (0)1224 775050 power@atrgroup.co.uk
UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net
UES Products 2017 / 103
PRODUCT INDEX Engineered Solutions
Torque Tools
Flex Joint Cleaning Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 //
Electric Smart Torque Tool API 17H Class 1-4 . . . . . . . . . 13 //
ROV Shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 //
Hi-Torque Tool API 17H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 //
Sea Chest Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 //
Smart Torque API 17h Class 1-4 . . . . . . . . . . . . . . . . . . . . . . 14 // Torque Tool API 17H Class V. . . . . . . . . . . . . . . . . . . . . . . . . . 19 //
Standard ROV Tooling 5K Water Blaster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 // 17 H/D Hot Stabs & Receptacles . . . . . . . . . . . . . . . . . . . . . 21 // 30 inch Saw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 // AX/VX Gasket Removal Tool. . . . . . . . . . . . . . . . . . . . . . . . . . 24 // Brushing Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 // Docking Cone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 // Dual Fluid HPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 // Dynaset Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 // ECB Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 // Flying Lead Orientation Tool. . . . . . . . . . . . . . . . . . . . . . . . . . 16 // GL4 Regan Latch Release Tool. . . . . . . . . . . . . . . . . . . . . . . . 34 // Hub Cleaning Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 // Intelligent Valve Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 // Intervention Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 // Linear Valve Override Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 // Mag Drill. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 // Multipurpose Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 // Paddle Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 // PH Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 // Subsea Load Cell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 // Subsea Sample Bottle Assembly. . . . . . . . . . . . . . . . . . . . . . 41 // Subsea Torque Verification Unit . . . . . . . . . . . . . . . . . . . . . . 17 // Suction Cup Sticky Foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 // Suction Pile Interface Stab . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 // Super Grinder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 // Torque Receptacle API 17D. . . . . . . . . . . . . . . . . . . . . . . . . . . 32 // Torque Tool Adapter 17H Class 6/7. . . . . . . . . . . . . . . . . . . 20 // Vortex Dredge Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 //
UES Products 12Te Tensioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 //
Roller Chute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 //
3.5Te Demag Peel Grab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 //
Roller Sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 //
5Te Peel Grab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 //
ROV Chain Caliper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 //
10Te Vantec Grab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 //
ROV Sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 //
Accumulator ER System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 //
ROV TP03 Trash Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 //
ATEX Zone 1 Hydraulic Power Pack. . . . . . . . . . . . . . . . . . . 52 //
Softline Cutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 //
Dirty Work Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 //
Softline Cutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 //
Diver Torque Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 //
Spitznaz Angle Grinder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 //
Drum Spooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 //
Stanley Chipping Hammer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 //
Electric Powered Reel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 //
Stanley Hydraulic Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 //
HPU & Reel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 //
Subsea Drill Rig. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 //
Husqvarna Cut Off Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 //
Subsea Torque Verificaation Unit. . . . . . . . . . . . . . . . . . . . . 75 //
Hydraulic A-Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 //
Turns Count & Torque Reader. . . . . . . . . . . . . . . . . . . . . . . . . 77 //
Hydraulic Breakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 //
Twin Disc Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 //
Hydraulic Cut-Off Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 //
Wire Rope Cutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 //
Hydraulic Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 //
Wire Rope Cutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 //
Hydraulic Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 //
Wire Rope Cutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 //
Hydraulic Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 // Hydraulic Grinder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 // Hydraulic Hole Punch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 // Hydraulic Impact Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 // Hydraulic Impact Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 // Hydraulic Peanut Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 // Hydraulic Power Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 // Hydraulic Power Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 // Hydraulic Recip Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 // Hydraulic Reel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 // Hydraulic Shear Cutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 // Hydraulic Shear Cutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 // Hydraulic Winches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 // Hydraulic Winches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 // Intensifier Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 // Large Hydraulic Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 // Magnum Core Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 // Marine Cleaning Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 // Melcal Marine Crane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 //
www.seanicusa.com
A Centurion Group company
THE CENTURION GROUP PORTFOLIO OF COMPANIES Centurion Group Limited provides equipment rental and specialist services on a global scale. We provide our customers with superior value by virtue of our experienced people and our unique ability to provide one rental solution via our portfolio companies. We combine the scale, breadth and capability of our collective rental solutions to drive efficiencies for our customers globally.
www.conserveplc.com
www.rentairoffshore.com
www.seanicusa.com
www.jackswinches.com
www.tristarwater.com.au
www.miningcamps.com.au
www.atrgroup.co.uk
www.sthyd.com
www.atrgroup.co.uk/services/ underwater-engineeringservices/
SEANIC OCEAN SYSTEMS
Seanic Headquarters
Seanic UES UK Office
Seanic Singapore Office
25310 Clay Road Katy, TX 77493 United States 713-934-3100 info@seanicusa.com
West Pitmillan Business Centre Newburgh, Ellon AB41 6AL United Kingdon +44 1358 788202 info@seanicusa.com
8 Taus View Square Singapore, 637574 +65 6863 4470 info@seanicusa.com
www.seanicusa.com
A Centurion Group company