Tool systems for Grooving and Parting-Off by Seco Tools

Tool systems for grooving and partingoff

STABILITY you can rely oN

The right solution for every machining operation Discover Seco’s most comprehensive tool systems making your grooving and parting-off operations significantly more economical and reliable. • Particularly cost-efficient and reliable during operation: Grooving system X4 • Safe with large diameters: Parting-off system 150.10 • Stable in every working direction: Multi Directional Turning system MDT • High precision grooving with exchangeable inserts: Mini Shaft™ • Reduce wear and increase chip control: Directed high pressure coolant systems Jetstream Tooling® and Jetstream Tooling® Duo

Innovative and reliable – grooving with X4 The new grooving and parting-off system X4 with 4-edge inserts is especially cost-efficient. The tangential and robust inserts and the very stable clamping system achieve very high indexing accuracy, high productivity and outstanding surface quality. • Flexible in use - the same toolholder is used for every possible groove width. • A large selection of toolholders is available in Seco-Capto™, shank and blade designs. • The blade version in a slim-line design is ideal for restricted spaces and difficult access conditions

Wide choice of X4 grooving inserts Grooving widths ap = 0.5 to 6.3 mm Grooving depths ar max = 6.5 mm Geometry: MC, FG and full radius R Grades: CP500, CP600 Tool holder: Seco-Capto™, holder and blade version with/without Jetstream Tooling® Duo

High precision, high working depth and straight Parting-off system 150.10 Wide choice of holders, grades and Geometries Grooving widths ap = 1.4 to 6.0 mm Grooving depths ar max = 80 mm Geometries: 12, 14, 16 Grades: CP500, CP600, TGP35, TGP45, HX, T25M, T350M Toolholders: blades in sizes 15, 20 and 25 with/without Jetstream Tooling® Duo and toolblocks.

When it comes to parting-off operations without lateral deflection of large diameters, the system 150.10 is the right choice. The reason is that the blades are made of strong High Speed Steel; the lateral forces are reduced to a minimum thanks to the patented Seco grooving insert. This means that straight surfaces are created and higher feed can be realized.

Higher process reliability and productivity JETSTREAM TOOLING® and JETSTREAM TOOLING® DUO Jetstream Tooling and Jetstream Tooling Duo are Seco’s patented directed high pressure coolant systems achieving reliable chip breaking and chip flow and at the same time considerably reducing abrasive and thermal wear. You can easily and significantly lower your production costs with higher cutting data and longer tool life. The new high-pressure cooling system Jetstream Tooling Duo guides the cutting fluid through 2 channels to both the rake and the flank face, significantly reducing thermal and abrasive tool wear. Additional benefits include significantly improved surface finishes, longer tool life and, as a result, lower tool change times. • Quick and easy to install in any machine tool and working with pressures from 5 to 300 bar • Suitable for shank tools as well as for Seco-Capto™ connection, for machining of every material • Increased cutting data, better surface finish and extremely long tool life due to lower thermal load of the indexable inserts resulting in reduced time for tool changing

Extremely safe and cost efficient Groove turning system – MDT The Seco MDT system (Multi Directional Turning) consists of one and two ended inserts as well as mono and modular toolholders for internal, external and axial machining. The key is the Secoloc V-top clamp together with the serrations on the bottom of the inserts, which has 4 times as much lateral stability compared to conventional grooving systems.

Stability in all working directions • Universal system for machining demanding workpieces with different diameters, profiles and deep grooves • Now only 1 tool instead of 3 for machining between 2 walls • Just 1 tool for longitudinal, facing, profile, thread or copy-turning, slotting, grooving or parting-off • High repeatability and positioning accuracy of ± 0.03 mm • Same insert for radial and axial use (axial starting at diameter Dc = 17 mm) • Large selection of toolholders, also in extra-long versions • Maximum operation stability for safe processes up to Dc = 65 mm for automatic and multi-spindle lathes with MDT reinforced parting-off blades • Extremely safe chip breaking and chip transport with the patented high pressure coolant system Jetstream Tooling.

Comprehensive range of MDT holders in mono and modular design For radial machining ar max = 64 mm (8 x ap) For axial machining Dc = 17 mm to 500 mm ar max = 24 mm (6 x ap) For internal machining Dmin = 16 mm ar max = 12 mm (3,5 x ap)

Wear-resistant and for high-quality surface finishes The variety of MDT holders in combination with the extensive range of indexable inserts for recessing and recess turning stand out through their versatility and productivity. The range offers reliable solutions for all materials and geometries for roughing, semi-finishing and finishing as well as for parting-off.

Indexable inserts with long and reliable tool life

Geometries for every application

• PVD-coated ultra-fine grade for universal use - CP500 • PVD-coated ultra-fine grade with added toughness - CP600 • PVD-coated ultra-fine grade for superalloys and high-speed machining of steel CP200 • Duratomic CVD-coated for machining cast iron - TGK1500 • Duratomic CVD-coated for high cutting speeds when machining steel - TGP25 • Uncoated ultra-fine grade for high-precision finishing - 890 • Uncoated fine grade for reliable semi-finishing, finishing and roughing superalloys - 883 • First choice for hard machining - CBN010 • Economical finishing of superalloys - CBN170 • First choice for perlitic iron - CBN200

Grooving widths ap = 2 to 10 mm Grooving: FT, MG, MC Parting off: MC Groove-turning: MT, FT Profiling: MP, RP For high precision applications: GS, RP, GG Thread turning: A55/A60, G55/ G60, ISO For more information about the geometries see page 53.

MDT - CHIPBREAKERS

High precision grooving and stable internal turning operations - MINI SHAFT™ Seco Mini Shaft features exchangeable inserts and a new type of joint with a double serration which makes the connection at the same time stable, secure and precise. Mini Shaft is versatile in all internal machining operations. • Higher degree of toughness and lower tendency to breakage due to the steel material of the shafts • Extremely stable and suitable for long overhangs with slim carbide boring bars • Two toolholder sizes 8 and 11 and different insert types for machining of circlip grooves, full radius and internal thread

For more information regarding the range please see the Machining Navigator, catalogue Turning.

Contents

MINI SHAFT â&#x20AC;&#x201C; HOLDERS Toolholders for inserts LCEX....................................................7

grooving with X4 Toolholders Code Key................................................................8 Toolholders range.......................................................................9 Insert range / Code Key......................................................10-11 Cutting data..........................................................................12-13

Groove turning system - MDT Toolholders, Code Key........................................................14-15 Seco-Capto Toolholders......................................................16-19 Shaft Toolholders, radial.....................................................19-25 Seco-Capto Toolholders for MTM...........................................25 MDT reinforced blade, radial..................................................26 Cutting data...............................................................................27 Seco-Capto Toolholders, axial.............................................28-35 Shaft toolholders, axial........................................................36-41 Seco-Capto Toolholders, internal.......................................42-45 Toolholders for boring bars, internal.................................46-47 Holders, modular.................................................................48-49 Blades, modular...................................................................50-51 Inserts, Code Key/Chipbreaker..........................................52-53 Insert programme................................................................54-61 Cutting data..........................................................................62-63

system 150.10 Toolholders / Inserts Code Key...............................................64 Geometries, feed.......................................................................64 Seco-Capto Holders for blades.................................................65 Holders and blades..............................................................66-67 Blades with Jetstream Tooling Duo.........................................68 Grooving insert range...............................................................69 Cutting data..........................................................................70-71

MINI SHAFT – HOLDERS Mini Shaft – Holders Toolholders for inserts LCEX Mini Shaft – Holders

A..-SGXN

A..-SGXN-R

E..-SGXN

E..-SGXN-R

• Inserts, please see pages 567-574 Right-hand version shown

Dimensions in mm Application

Part No.

dmm

Dm min

A12G-SGXN08-20 A12G-SGXN08-20-R

12 12

11,0 –

11,50 –

86,5 86,5

4,8 4,8

16,5 16,5

8 8

0,05 0,05

LCEX08.. LCEX08..

A16H-SGXN11-25 A16H-SGXN11-25-R

16 16

15,0 –

15,50 –

96,0 96,0

6,7 6,7

21,0 21,0

11 11

0,10 0,10

LCEX11.. LCEX11..

E06G-SGXN08 E06G-SGXN08-R

6 6

5,5 –

5,75 –

86,5 86,5

4,8 4,8

– –

8 8

0,03 0,03

LCEX08.. LCEX08..

E08H-SGXN11 E08H-SGXN11-R

8 8

7,5 –

7,75 –

96,0 96,0

6,7 6,7

– –

11 11

0,05 0,05

LCEX11.. LCEX11..

Spare Parts, Parts included in delivery Screw/ Key

INSERT RANGE Insert range with profiles for turning, profiling, back facing, chamfering, radius grooves, circlip grooves and threading (partial profile, ISO metric, BSW, TR, UN, NPT, NPTF).

Toolholder/ Insert dimension A12G-.. A16H-.. E06G-.. E08H-..

C02506-T08P C03509-T10P C02506-T08P C03509-T10P

T08P-2 T10P-2 T08P-2 T10P-2

Please check availability in current price and stock-list

For product range and cutting data, please see Machining Navigator 2012 Turning pages 567- or www.secotools.com.

X4 – Code Key Seco-Capto™ Toolholder

C4 - X4 1

1. Seco Capto size 2. Tool system 3. Toolholder setting anglel - F = 90° - G = 0°

060 - 25 6

03 JET

4. Version - R = right - L = left 5. f1 Dimension

6. l1 - Dimension 7. Insert length l2 8. Seat size 9. Cooling system - Jetstream Tooling® Duo

Toolholder

1. Tool system 2. Toolholder setting anglel - F = 90° - G = 0°

03 JET 8

3. Version - R = right - L = left 4. Shank height h

5. Shank width b 6. Tool length l1 7. Insert lengthe l2 8. Seat size 9. Cooling system - Jetstream Tooling® Duo

Dovetail Toolholder

26 ITX 25 4

1. Tool system 2. Clamping system - anvil 3. Version - R = right - L = left 4. Shank height

5. Version for automatic or multi spindle lathes, e. g. Index Traub 6. Insert length 7. Width of insert seat

8. Small height of dovetail - R = right - L = left

Definition aid for the selection of the reinforced X4 blade. Picture shows the top view of the holder with mounted insert.

Insert LEFT for left hand application

Insert RIGHT for right hand application

e. g. X4FL26ITX2503L

e. g. X4FR26ITX2503R

Small height of dovetail LEFT

Small height of dovetail RIGHT

Insert LEFT for left hand application

Insert RIGHT for right hand application

e. g. X4FL26ITX2503R

e. g. X4FR26ITX2503L

Small height of dovetail RIGHT

Small height of dovetail LEFT

X4 – Toolholder, radial Toolholder für grooving inserts X4GK

Seco-Capto™ Toolholder, Jetstream Tooling® Duo Dimensions in mm Application

Part. No.

D5m

C4-X4FR-27060-2503JET

40.0

60.0

27.0

0.7

X4GK25..

C4-X4FL-27060-2503JET

40.0

60.0

27.0

0.7

X4GK25..

C5-X4FR-35060-2503JET

50.0

60.0

35.0

0.9

X4GK25..

C5-X4FL-35060-2503JET

50.0

60.0

35.0

0.9

X4GK25..

C6-X4FR-45065-2503JET

63.0

65.0

45.0

1.2

X4GK25..

C6-X4FL-45065-2503JET

63.0

65.0

45.0

1.2

X4GK25..

Shaft toolholder, Jetstream Tooling® Duo Dimensions in mm Application

Part. No.

X4FR 1616M2503JET

16.0

150.0

36.64

0.4

X4GK25..

2020M2503JET

20.0

150.0

36.64

0.5

X4GK25..

2525M2503JET

25.0

150.0

36.64

0.7

X4GK25..

X4FR 1616M2503JET

16.0

150.0

36.64

0.4

X4GK25..

2020M2503JET

20.0

150.0

36.64

0.5

X4GK25..

2525M2503JET

25.0

150.0

36.64

0.7

X4GK25..

Spare Parts, included in delivery Clamp screw/Key

Plug

L85020-T15P

T15P-7

JET-P1/8-5MM

Dovetail blade Part. No.

Dimensions in mm

ar1

Dmax

Siehe Spezifikation der Inserts X4GK (folgende Seiten)

21.4

37.2

6.5

X4GK2503..L..

40.8

2.9

X4GK2503..L..

21.4

37.2

6.5

X4GK2503..L..

40.8

2.9

X4GK2503..L..

21.4

37.2

6.5

X4GK2503..R..

40.8

2.9

X4GK2503..R..

21.4

37.2

6.5

X4GK2503..R..

40.8

2.9

X4GK2503..R..

0.5 … 3

X4FL26ITX2503R

7.85

119.5

0.5 … 3

X4FL32ITX2503R

7.85

119.5

0.5 … 3

X4FL26ITX2503L

7.85

119.5

0.5 … 3

X4FL32ITX2503L

7.85

119.5

0.5 … 3

X4FR26ITX2503R

7.85

119.5

0.5 … 3

X4FR32ITX2503R

7.85

119.5

0.5 … 3

X4FR26ITX2503L

7.85

119.5

0.5 … 3

X4FR32ITX2503L

7.85

119.5

Spare Parts, included in delivery Clamp screw/Key

TCEI0412

3 SMS795

X4 Insert range, left version X4GK Tolerance in mm: ap = ±0.025 ar = ±0.1 ar = +0.3/-0 s = ±0.025 κ = ±0.25° rε = ±0.03

LN-MC

ap Dimensions in mm: 0.5-1.0 1.5- 3.0

LR-MC

LL-MC

LN-FG

Dimensions in mm Inserts

Part. No.

X4GK..LN-MC

X4GK..LR-MC

X4GK..LL-MC

X4GK..LN-FG

X4GK..LN-R

Grades

ar*

rε

X4GK 2503005-0050LN-MC X4GK 2503009-0079LN-MC X4GK 2503005-0100LN-MC X4GK 2503009-0119LN-MC X4GK 2503010-0150LN-MC X4GK 2503019-0157LN-MC X4GK 2503019-0183LN-MC X4GK 2503010-0200LN-MC X4GK 2503019-0239LN-MC X4GK 2503015-0250LN-MC X4GK 2503015-0300LN-MC

0.50 0.79 1.00 1.19 1.50 1.57 1.83 2.00 2.39 2.50 3.00

2.6 4.3 4.3 4.3 6.5 6.5 6.5 6.5 6.5 6.5 6.5

19.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0

25.44 25.44 25.44 25.44 25.44 25.43 25.43 25.44 25.43 25.43 25.43

20.40 20.40 20.40 20.40 20.40 20.39 20.39 20.40 20.39 20.39 20.39

0.05 0.09 0.05 0.09 0.10 0.19 0.19 0.10 0.19 0.15 0.15

X4GK 2503005-0100LR15-MC X4GK 2503010-0150LR15-MC X4GK 2503010-0200LR15-MC X4GK 2503015-0250LR15-MC X4GK 2503015-0300LR06-MC

1.00 1.50 2.00 2.50 3.00

4.3 6.5 6.5 6.5 6.5

19.0 19.0 19.0 19.0 19.0

25.44 25.43 25.43 25.43 25.43

20.40 20.39 20.39 20.39 20.39

0.05 0.10 0.10 0.15 0.15

X4GK 2503005-0100LL15-MC X4GK 2503010-0150LL15-MC X4GK 2503010-0200LL15-MC X4GK 2503015-0250LL15-MC X4GK 2503015-0300LL06-MC

1.00 1.50 2.00 2.50 3.00

4.3 6.5 6.5 6.5 6.5

19.0 19.0 19.0 18.9 18.9

25.40 25.37 25.35 25.32 25.31

20.36 20.34 20.32 20.30 20.28

0.05 0.10 0.10 0.15 0.15

X4GK 2503010-0115LN-FG X4GK 2503010-0135LN-FG X4GK 2503010-0165LN-FG X4GK 2503010-0190LN-FG X4GK 2503015-0215LN-FG X4GK 2503015-0265LN-FG

1.15 1.35 1.65 1.90 2.15 2.65

4.0 6.0 6.0 6.0 6.0 6.0

19.0 19.0 19.0 19.0 19.0 19.0

25.44 25.44 25.44 25.44 25.43 25.43

20.40 20.40 20.40 20.40 20.39 20.39

0.10 0.10 0.10 0.10 0.15 0.15

     

X4GK 2503M0-0100LN-R X4GK 2503M0-0120LN-R X4GK 2503M0-0150LN-R X4GK 2503M0-0200LN-R X4GK 2503M0-0300LN-R

1.00 1.20 1.50 2.00 3.00

4.0 4.0 6.5 6.0 6.0

19.0 19.0 19.0 19.0 19.0

25.24 25.29 25.36 25.39 25.37

20.38 20.37 20.37 20.36 20.34

0.50 0.60 0.75 1.00 1.50

    

Insert Code Key

1. Tool system 2. Tolerances 3. Insert type - K =four edges with chipbreaker - H = four edges without chipbreaker

CP500

03 010 0150 5

4. Insert length 5. Seat size 6. Corner radius 7. Insert width 8. Version (R = right, L = left)

LN-R

9. Chipbreaker - MC = Chipbreaker for medium parting-off and grooving - FG = Circlip - R = Full radius

CP600 

         



            

X4 Insert range, right version X4GK Tolerance in mm: ap = ±0.025 ar = ±0.1 ar = +0.3/-0 s = ±0.025 κ = ±0.25° rε = ±0.03

RN-MC

ap Dimensions in mm: 0.5-1.0 1.5- 3.0

RR-MC

RL-MC

RN-FG

Dimensions in mm Inserts

X4GK..RN-MC

X4GK..RR-MC

X4GK..RL-MC

X4GK..RN-FG

X4GK..RN-R

Part. No.

RN-R

Grades CP500

ar*

rε

X4GK 2503005-0050RN-MC X4GK 2503009-0079RN-MC X4GK 2503005-0100RN-MC X4GK 2503009-0119RN-MC X4GK 2503010-0150RN-MC X4GK 2503019-0157RN-MC X4GK 2503019-0183RN-MC X4GK 2503010-0200RN-MC X4GK 2503019-0239RN-MC X4GK 2503015-0250RN-MC X4GK 2503015-0300RN-MC

0.50 0.79 1.00 1.19 1.50 1.57 1.83 2.00 2.39 2.50 3.00

2.6 4.3 4.3 4.3 6.5 6.5 6.5 6.5 6.5 6.5 6.5

19.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0

25.44 25.44 25.44 25.44 25.44 25.43 25.43 25.44 25.43 25.43 25.43

20.40 20.40 20.40 20.40 20.40 20.39 20.39 20.40 20.39 20.39 20.39

0.05 0.09 0.05 0.09 0.10 0.19 0.19 0.10 0.19 0.15 0.15

X4GK 2503005-0100RR15-MC X4GK 2503010-0150RR15-MC X4GK 2503010-0200RR15-MC X4GK 2503015-0250RR15-MC X4GK 2503015-0300RR06-MC

1.00 1.50 2.00 2.50 3.00

4.3 6.5 6.5 6.5 6.5

19.0 19.0 19.0 18.9 18.9

25.40 25.37 25.35 25.32 25.31

20.36 20.34 20.32 20.30 20.28

0.05 0.10 0.10 0.15 0.15

X4GK 2503005-0100RL15-MC X4GK 2503010-0150RL15-MC X4GK 2503010-0200RL15-MC X4GK 2503015-0250RL15-MC X4GK 2503015-0300RL06-MC

1.00 1.50 2.00 2.50 3.00

4.3 6.5 6.5 6.5 6.5

19.0 19.0 19.0 19.0 19.0

25.44 25.43 25.43 25.43 25.43

20.40 20.39 20.39 20.39 20.39

0.05 0.10 0.10 0.15 0.15

X4GK 2503010-0115RN-FG X4GK 2503010-0135RN-FG X4GK 2503010-0165RN-FG X4GK 2503010-0190RN-FG X4GK 2503015-0215RN-FG X4GK 2503015-0265RN-FG

1.15 1.35 1.65 1.90 2.15 2.65

4.0 4.0 6.0 6.0 6.0 6.0

19.0 19.0 19.0 19.0 19.0 19.0

25.44 25.44 25.44 25.44 25.43 25.43

20.40 20.40 20.40 20.40 20.39 20.39

0.10 0.10 0.10 0.10 0.15 0.15

     

X4GK 2503M0-0100RN-R X4GK 2503M0-0120RN-R X4GK 2503M0-0150RN-R X4GK 2503M0-0200RN-R X4GK 2503M0-0300RN-R

1.00 1.20 1.50 2.00 3.00

4.0 4.0 6.0 6.0 6.0

19.0 19.0 19.0 19.0 19.0

25.24 25.29 25.36 25.39 25.37

20.38 20.37 20.37 20.36 20.34

0.50 0.60 0.75 1.00 1.50

    

CP600 

         



            

Grades CP500

Alternative harder and more wear resistant grade suitable for shallower grooves, larger components and higher cutting speeds. Also recommended for optimizing in steels and cast irons. (Ti,Al)N + TiN

CP600

First choice in general grooving and parting-off in a variety of workpiece materials. Favourable mix of both wear resistance and toughness. PVD-coated fine-grained grade. (Ti,Al)N + TiN

Chipbreaker MC = Geometry for plunging, grooving and medium parting-off FG = Circlip R = Full radius

X4 Cutting data Cutting speed vc (m/min)

CP500

Seco Material Group

CP600 Feed f (mm/rev)

Cutting width ap 0.5-1.5

2.0-3.0

0.5-1.5

2.0-3.0

200 175 165 –

210 190 165 150

185 170 155 –

190 175 160 140

0.05 0.10 0.20 0.30

175 160 145 –

190 165 150 130

170 155 135 –

180 160 140 125

0.05 0.10 0.20 0.30

155 150 130 –

180 155 135 115

150 140 125 –

160 145 130 115

0.05 0.10 0.20 0.30

130 120 110 –

145 125 115 95

125 115 100 –

135 120 105 95

0.05 0.10 0.20 0.30

110 105 95 –

125 110 100 80

105 95 85 –

110 100 90 80

0.05 0.10 0.20 0.30

110 95 80 –

100 85 75 65

105 95 80 –

90 80 70 60

0.05 0.10 0.20 0.30

55 50 – –

70 60 55 50

65 55 50 –

65 60 55 50

0.05 0.10 0.20 0.30

155 140 125 –

165 145 130 120

150 135 120 –

155 140 125 110

0.05 0.10 0.20 0.30

130 120 115 –

135 125 120 100

125 115 105 –

130 120 110 100

0.05 0.10 0.20 0.30

125 115 100 –

135 120 105 95

120 110 100 –

125 115 105 95

0.05 0.10 0.20 0.30

75 70 60 –

90 75 65 65

75 70 60 –

85 75 65 60

0.05 0.10 0.20 0.30

P Steel

Stainless steel

Use the tables in the Machining Navigator, catalogue Turning, to classify the workpiece material into a SMG.

vc = Cutting speed (m/min) ap = Width of insert in mm f = Feed in mm/rev

X4 Cutting data Cutting speed vc (m/min) CP500

Seco Material Group

CP600 Feed f (mm/rev)

Cutting width ap

Cast iron

Non-iron material

Superalloys

0.5-1.5

2.0-3.0

0.5-1.5

2.0-3.0

120 110 95 –

135 120 110 95

– – – –

0.05 0.10 0.20 0.30

95 90 75 –

110 95 90 75

– – – –

0.05 0.10 0.20 0.30

95 85 70 –

105 95 85 70

– – – –

0.05 0.10 0.20 0.30

95 85 70 –

105 95 85 70

– – – –

0.05 0.10 0.20 0.30

465 390 330 280

515 435 365 310

425 360 300 250

470 400 330 280

0.05 0.10 0.20 0.30

355 320 260 220

390 355 290 240

325 290 235 200

360 320 260 220

0.05 0.10 0.20 0.30

315 285 230 195

350 315 255 215

285 255 205 175

320 280 230 195

0.05 0.10 0.20 0.30

55 40

50 35

50 37

0.05 0.10

40 30

0.05 0.10

35 25

25 25

35 25

25 25

0.05 0.10

35 30

40 35

35 30

40 35

0.05 0.10

Set-up/Machining recommendations The mounting should be stable. The overhang of the toolholder should be as small as possible. The centre height should never deviate by more than ± 0,1 mm from the workpiece centre. Parting-off An insert with a neutral edge (N) normally results in a longer useful life of the insert. The useful life of the insert can be increased by reducing the feed rate or stopping the feed entirely before breakthrough.

MDT – Tool holders Code Key Seco-Capto™ External /Internal toolholder

C4 - C 1

1. Seco Capto size 2. Insert clamping 3. Toolholder setting angle 4. Maximum grooving depth

- 27

050 - 03

JET

5. Version 6. f1 - Dimension 7. l1 - Dimension 8. Seat size 9. Cooling system - Jetstream Tooling®

External toolholder

1. Insert clamping 2. Toolholder setting angle 3. Maximum grooving depth 4. Version

5. Shank height h 6. Shank width b 7. Tool length l1 8. Seat size

100 070 10

JET 12

9. Tang curvature direction 10. Maximum diameter 11. Minimum diameter 12. Cooling system - Jetstream Tooling®

Internal toolholder

- C

1. Toolholder type 2. Shank diameter 3. Tool length 4. Insert clamping

5. Toolholder setting angle 6. Maximum grooving width 7. Version 8. Seat size

Additional information Seco Capto size C3 = 32 mm C4 = 40 mm C5 = 50 mm C6 = 60 mm Insert clamping C = Anvil Toolholder setting anglel a G = 0° R = 15° T = 30° S = 45° W = 60° K = 75° F = 90° B = 105° E = 120° D = 135°

Maximum grooving depth E = 1.0 x ap F = 1.5 x ap G = 2.0 x ap H = 2.5 x ap I = 3.0 x ap J = 3.5 x ap K = 4.0 x ap L = 4.5 x ap M = 5.0 x ap N = 5.5 x ap O = 6.0 x ap P = 6.5 x ap Q = 7.0 x ap R = 7.5 x ap S = 8.0 x ap T = 8.5 x ap Z = 12.5 x ap Version L =left R = right

f1 - Dimension 27 = 27 mm 35 = 35 mm 45 = 45 mm etc

Shank height 12 = 12 mm 16 = 16 mm 20 = 20mm etc

l1 - Dimension 050 = 50 mm 060 = 60 mm 065 = 65 mm etc

Shank width 12 = 12 mm 16 = 16 mm 20 = 20mm etc

Seat size 1303 = 2.4 mm 1304 = 3.4 mm 1603 = 2.3 mm 1604 = 3.1 mm 1605 = 4.1 mm 1606 = 5.1 mm 1902 = 1.6 mm 2802 = 1.6 mm 3008 = 6.8 mm etc

Tool length H = 100 mm K = 125 mm M = 150 mm P = 170 mm R = 200 mm

Definition aid for the selection of the reinforced MDT blade Picture shows the top view of the holder with mounted insert.

Insert LEFT for left hand application

Insert RIGHT for right hand application

e. g. CFTL26ITX1902LRB

e. g. CFTR26ITX1902RRB

Small height of dovetail LEFT

Small height of dovetail RIGHT

Insert LEFT for left hand application

Insert RIGHT for right hand application

e. g. CFTL26ITX1902RRB

e. g. CFTR26ITX1902LRB

Small height of dovetail RIGHT

Small height of dovetail LEFT

Toolholder

1. Clamping system - anvil 2. Setting angle - F = 90째 3. Maximum grooving depth - T = 8,5 x ap - Z = 12,5 x ap - X = 16,25 x ap 4. Version - R = right - L = left 5. Shank height

6. Version for - automatic or multi spindle lathes, e. g. Index Traub 7. Length 8. Insert length 9. Width of insert seat 10. Small height of dovetail - R = right - L = left 11. Reinforced blades

MDT – Toolholders, external, radial, seco-capto™ Toolholders for inserts LCGN, LCMF and LCMR CFIR/L

Right-hand version shown Inserts, please see page 54-61 Dimensions in mm Application

Seat size

Seco-Capto Size

Part. No.

ar**

Dm2

ar2

C4-CFIR-27055-03 C4-CFIL-27055-03

40 40

27 27

55 55

9 9

195 195

8 8

0.4 0.4

3 3

LC..1603.. LC..1603..

C4-CFIR-27055-04 C4-CFIL-27055-04

40 40

27 27

55 55

12 12

195 195

11 11

0.4 0.4

4 4

LC..1604.. LC..1604..

C4-CFIR-27055-05 C4-CFIL-27055-05

40 40

27 27

55 55

15 15

195 195

14 14

0.4 0.4

5 5

LC..1605.. LC..1605..

C5-CFIR-35060-03 C5-CFIL-35060-03

50 50

35 35

60 60

9 9

195 195

7 7

0.7 0.7

3 3

LC..1603.. LC..1603..

C5-CFIR-35060-04 C5-CFIL-35060-04

50 50

35 35

60 60

12 12

195 195

9 9

0.7 0.7

4 4

LC..1604.. LC..1604..

C5-CFIR-35060-05 C5-CFIL-35060-05

50 50

35 35

60 60

15 15

195 195

12 12

0.7 0.7

5 5

LC..1605.. LC..1605..

C5-CFIR-35065-06 C5-CFIL-35065-06

50 50

35 35

65 65

18 18

195 195

15 15

0.7 0.7

6 6

LC..1606.. LC..1606..

C6-CFIR-45065-03 C6-CFIL-45065-03

63 63

45 45

65 65

9 9

195 195

7 7

1.0 1.0

3 3

LC..1603.. LC..1603..

C6-CFIR-45065-04 C6-CFIL-45065-04

63 63

45 45

65 65

12 12

195 195

9 9

1.0 1.0

4 4

LC..1604.. LC..1604..

C6-CFIR-45065-05 C6-CFIL-45065-05

63 63

45 45

65 65

15 15

195 195

12 12

1.0 1.0

5 5

LC..1605.. LC..1605..

C6-CFIR-45065-06 C6-CFIL-45065-06

63 63

45 45

65 65

18 18

195 195

15 15

1.0 1.0

6 6

LC..1606.. LC..1606..

C6-CFIR-45075-08 C6-CFIL-45075-08

63 63

45 45

75 75

24 24

195 195

21 21

1.0 1.0

8 8

LC..3008.. LC..3008..

D5m

** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF 16..= 14 mm/ LCMF 30..= 28 mm

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06 ..08

Clamp screw/Key

MC6S4x18 MC6S5x18 MC6S5x18 TCEI0815 TCEI0825

3 SMS795 4 SMS795 4 SMS795 6 SMS795 6 SMS795

Torque value Nm

3.5 5.0 5.0 10.0 10.0

MDT – Toolholders, external, radial, Jetstream Tooling®, seco-capto™ Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFIR/L...JET

Right-hand version shown

ar = 3 x ap

Inserts, please see page 54-61 Dimensions in mm Application

Seat size

Seco-Capto Size

Part. No.

ar**

Dm2

ar2

C4-CFIR-27060-03JET C4-CFIL-27060-03JET

40 40

27 27

60 60

9 9

195 195

9 9

0.4 0.4

3 3

LC..1603.. LC..1603..

C4-CFIR-27060-04JET C4-CFIL-27060-04JET

40 40

27 27

60 60

12 12

195 195

12 12

0.4 0.4

4 4

LC..1604.. LC..1604..

C4-CFIR-27065-05JET C4-CFIL-27065-05JET

40 40

27 27

65 65

15 15

195 195

15 15

0.4 0.4

5 5

LC..1605.. LC..1605..

C5-CFIR-35060-03JET C5-CFIL-35060-03JET

50 50

35 35

60 60

9 9

195 195

9 9

0.8 0.8

3 3

LC..1603.. LC..1603..

C5-CFIR-35065-04JET C5-CFIL-35065-04JET

50 50

35 35

65 65

12 12

195 195

12 12

0.8 0.8

4 4

LC..1604.. LC..1604..

C5-CFIR-35065-05JET C5-CFIL-35065-05JET

50 50

35 35

65 65

15 15

195 195

15 15

0.8 0.8

5 5

LC..1605.. LC..1605..

C5-CFIR-35075-06JET C5-CFIL-35075-06JET

50 50

35 35

75 75

18 18

195 195

18 18

0.8 0.8

6 6

LC..1606.. LC..1606..

C6-CFIR-45065-03JET C6-CFIL-45065-03JET

63 63

45 45

65 65

9 9

195 195

9 9

1.2 1.2

3 3

LC..1603.. LC..1603..

C6-CFIR-45065-04JET C6-CFIL-45065-04JET

63 63

45 45

65 65

12 12

195 195

12 12

1.2 1.2

4 4

LC..1604.. LC..1604..

C6-CFIR-45070-05JET C6-CFIL-45070-05JET

63 63

45 45

70 70

15 15

195 195

15 15

1.2 1.2

5 5

LC..1605.. LC..1605..

C6-CFIR-45075-06JET C6-CFIL-45075-06JET

63 63

45 45

75 75

18 18

195 195

18 18

1.2 1.2

6 6

LC..1606.. LC..1606..

C6-CFIR-45085-08JET C6-CFIL-45085-08JET

63 63

45 45

85 85

24 24

195 195

24 24

1.2 1.2

8 8

LC..3008.. LC..3008..

C4-CFMR-27070-03JET C4-CFML-27070-03JET

40 40

27 27

70 70

15 15

195 195

15 15

0.5 0.5

3 3

LC..1603.. LC..1603..

C4-CFMR-27070-04JET C4-CFML-27070-04JET

40 40

27 27

70 70

20 20

195 195

20 20

0.5 0.5

4 4

LC..1604.. LC..1604..

C5-CFMR-35070-03JET C5-CFML-35070-03JET

50 50

35 35

70 70

15 15

195 195

15 15

0.9 0.9

3 3

LC..1603.. LC..1603..

C5-CFMR-35075-04JET C5-CFML-35075-04JET

50 50

35 35

75 75

20 20

195 195

20 20

0.8 0.8

4 4

LC..1604.. LC..1604..

C5-CFMR-35075-05JET C5-CFML-35075-05JET

50 50

35 35

75 75

25 25

195 195

25 25

0.8 0.8

5 5

LC..1605.. LC..1605..

C5-CFMR-35085-06JET C5-CFML-35085-06JET

50 50

35 35

85 85

30 30

195 195

30 30

0.7 0.7

6 6

LC..1606.. LC..1606..

C6-CFMR-45080-03JET C6-CFML-45080-03JET

63 50

45 45

80 80

15 15

195 195

15 15

1.3 1.3

3 3

LC..1603.. LC..1603..

C6-CFMR-45080-04JET C6-CFML-45080-04JET

63 63

45 45

80 80

20 20

195 195

20 20

1.2 1.2

4 4

LC..1604.. LC..1604..

C6-CFMR-45080-05JET C6-CFML-45080-05JET

63 63

45 45

80 80

25 25

195 195

25 25

1.1 1.1

5 5

LC..1605.. LC..1605..

C6-CFMR-45085-06JET C6-CFML-45085-06JET

63 63

45 45

85 85

30 30

195 195

30 30

1.1 1.1

6 6

LC..1606.. LC..1606..

D5m

** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF /LCMF 16..= 14 mm

MDT – Toolholders, external, radial, Jetstream Tooling®, seco-capto™ Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFOR/L...JET

Right-hand version shown ar = 6 x ap Inserts, please see page 54-61 Dimensions in mm Application

Seat size

Seco-Capto Size

Part. No.

ar**

Dm2

ar2

C4-CFOR-27070-03-JET C4-CFOL-27070-03-JET

40 40

27 27

70 70

18 18

195 195

18 18

0.5 0.5

3 3

LC..1603.. LC..1603..

C4-CFOR-27080-04-JET C4-CFOL-27080-04-JET

40 40

27 27

80 80

24 24

195 195

24 24

0.5 0.5

4 4

LC..1604.. LC..1604..

C4-CFOR-27085-05-JET C4-CFOL-27085-05-JET

40 40

27 27

85 85

30 30

195 195

30 30

0.5 0.5

5 5

LC..1605.. LC..1605..

C5-CFOR-35070-03-JET C5-CFOL-35070-03-JET

50 50

35 35

70 70

18 18

195 195

18 18

0.7 0.7

3 3

LC..1603.. LC..1603..

C5-CFOR-35080-04-JET C5-CFOL-35080-04-JET

50 50

35 35

80 80

24 24

195 195

24 24

0.7 0.7

4 4

LC..1604.. LC..1604..

C5-CFOR-35085-05-JET C5-CFOL-35085-05-JET

50 50

35 35

85 85

30 30

195 195

30 30

0.7 0.7

5 5

LC..1605.. LC..1605..

C5-CFOR-35100-06-JET C5-CFOL-35100-06-JET

50 50

35 35

100 100

36 36

195 195

36 36

0.9 0.9

6 6

LC..1606.. LC..1606..

C6-CFOR-45075-03-JET C6-CFOL-45075-03-JET

63 63

45 45

75 75

18 18

195 195

18 18

1.1 1.1

3 3

LC..1603.. LC..1603..

C6-CFOR-45080-04-JET C6-CFOL-45080-04-JET

63 63

45 45

80 80

24 24

195 195

24 24

1.1 1.1

4 4

LC..1604.. LC..1604..

C6-CFOR-45090-05-JET C6-CFOL-45090-05-JET

63 63

45 45

90 90

30 30

195 195

30 30

1.2 1.2

5 5

LC..1605.. LC..1605..

C6-CFOR-45100-06-JET C6-CFOL-45100-06-JET

63 63

45 45

100 100

36 36

195 195

36 36

1.3 1.3

6 6

LC..1606.. LC..1606..

C6-CFOR-45115-08-JET C6-CFOL-45115-08-JET

63 63

45 45

115 115

48 48

195 195

48 48

1.4 1.4

8 8

LC..3008.. LC..3008..

D5m

** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF /LCMF 16..= 14 mm and LCMF 30..= 28 mm

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06 ..08

Clamp screw/Key

TCEI0513 TCEI0613 TCEI0613 TCEI0815 TCEI1020

4 SMS795 5 SMS795 5 SMS795 6 SMS795 6 SMS795

Torque value Nm

6.0 8.0 8.0 10.0 15.0

MDT – Toolholders, external, radial Toolholders for inserts LCMF (also with Jetstream Tooling®) CFZR/L...(JET)

...RB

CFZR/L...RB(JET)

Ø max. * Right-hand version shown

Inserts, please see page 54-61 Dimensions in mm

Seat size Application

Part. No.

D5m

Ø max. *

C4-CFZR-22075-2802JET C4-CFZL-22075-2802JET C5-CFZR-27075-2802JET C5-CFZL-27075-2802JET C6-CFZR-33075-2802JET C6-CFZL-33075-2802JET

40 40 50 50 63 63

22 22 27 27 33 33

75 75 75 75 75 75

26 26 26 26 26 26

– – – – – –

0.44 0.44 0.63 0.63 0.98 0.98

2 2 2 2 2 2

LC..2802.. LC..2802.. LC..2802.. LC..2802.. LC..2802.. LC..2802..

C4-CFZR-22075-2802RBJET C4-CFZL-22075-2802RBJET C5-CFZR-27075-2802RBJET C5-CFZL-27075-2802RBJET C6-CFZR-33075-2802RBJET C6-CFZL-33075-2802RBJET

40 40 50 50 63 63

22 22 27 27 33 33

75 75 75 75 75 75

– – – – – –

52 52 52 52 52 52

0.50 0.50 0.68 0.68 1.00 1.00

2 2 2 2 2 2

LC..2802.. LC..2802.. LC..2802.. LC..2802.. LC..2802.. LC..2802..

Dimensions in mm Seat size Application

Part. No.

Ø max. *

CFZR 2020M2802JET CFZL 2020M2802JET CFZR 2525M2802JET CFZL 2525M2802JET

20 20 25 25

150 150 150 150

20 20 25 25

50 50 50 50

26 26 26 26

– – – –

0.39 0.39 0.60 0.60

2 2 2 2

LC..2802.. LC..2802.. LC..2802.. LC..2802..

CFZR 2020M2802RBJET CFZL 2020M2802RBJET CFZR 2525M2802RBJET CFZL 2525M2802RBJET

20 20 25 25

150 150 150 150

20 20 25 25

52 52 52 52

– – – –

52 52 52 52

0.43 0.43 0.64 0.64

2 2 2 2

LC..2802.. LC..2802.. LC..2802.. LC..2802..

Dimensions in mm Seat size Application

Part. No. CFSR 2020M1902RBJET CFSL 2020M1902RBJET

Ø max. *

20 20

150 150

20 20

38 38

33 33

0.42 0.42

2 2

LC..1902.. LC..1902..

Dimensions in mm Seat size Application

Part. No.

..02

Ø max. *

CFZR 1616M2802 CFZL 1616M2802

16 16

150 150

16 16

46 46

26 26

– –

0.26 0.26

2 2

LC..2802.. LC..2802..

CFZR 1616M2802RB CFZL 1616M2802RB

16 16

150 150

16 16

46 46

– –

52 52

0.28 0.28

2 2

LC..2802.. LC..2802..

Clamp screw/Key

TCEI0513

* Max. parting-off diameter

Spare Parts, included in delivery Toolholder/ Insert Dimension

4 SMS795

Torque value Nm

6.0

MDT – Toolholders, external, radial Toolholders for inserts LCGN, LCMF and LCMR CFO..RB, CFSR/L..RB

..RB

CF..1212, 1616

CF..2020, 2525

* Ø max. Right-hand version shown

Inserts, please see page 54-61

Dimensions in mm Seat size Application

Part. No.

Ø max.*

CFOR 1212K1902RB CFOR 1616K1902RB CFOL 1212K1902RB CFOL 1616K1902RB

12 16 12 16

125 125 125 125

12 16 12 16

22 22 22 22

25.4 25.4 25.4 25.4

0.13 0.23 0.13 0.23

2 2 2 2

LC..1902.. LC..1902.. LC..1902.. LC..1902..

CFSR 1212K1902RB CFSR 1616K1902RB CFSL 1212K1902RB CFSL 1616K1902RB

12 16 12 16

125 125 125 125

12 16 12 16

25 25 25 25

33.0 33.0 33.0 33.0

0.12 0.22 0.12 0.22

2 2 2 2

LC..1902.. LC..1902.. LC..1902.. LC..1902..

* Max. parting-off diameter

Spare Parts, included in delivery Clamp screw/Key Toolholder/ Insert Dimension CFO..CFS..02

Torque value Nm L85011-T15P

T15P-7

5,0

Dimensions in mm Seat size Application

Part. No. 03

Ø max.*

CFOR 1212M03 CFOL 1212M03

12 12

150 150

12.0 12.0

32 32

37 37

0.1 0.1

3 3

LC..1603.. LC..1603..

CFTR 1616M03 CFTR 2020K03 CFTR 2525M03 CFTL 1616M03 CFTL 2020K03 CFTL 2525M03

16 20 25 16 20 25

150 125 150 150 125 150

16.0 21.5 26.5 16.0 21.5 26.5

41 42 42 41 42 42

50 50 50 50 50 50

0.2 0.4 0.7 0.2 0.4 0.7

3 3 3 3 3 3

LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603..

CFPR 2020K04 CFPR 2525M04 CFPL 2020K04 CFPL 2525M04

20 25 20 25

125 150 125 150

21.5 26.5 21.5 26.5

43 43 43 43

50 50 50 50

0.4 0.7 0.4 0.7

4 4 4 4

LC..1604.. LC..1604.. LC..1604.. LC..1604..

* Max. parting-off diameter due to the design

Spare Parts, included in delivery Toolholder/ Insert Dimension

CFO..03 CFT..03 CFP..04

Clamp screw/Key

TCEI0409 TCEI0513 TCEI0613

3 SMS795 4 SMS795 5 SMS795

Torque value Nm

3.5 6.0 8.0

MDT â&#x20AC;&#x201C; Toolholders, external, radial Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFSR/L

Right-hand version shown

Inserts, please see page 54-61

ar = 8 x ap

Dimensions in mm Seat size Application

Part. No.

ar**

Dm2

CFSR 2525M03 CFSR 3225P03 CFSL 2525M03 CFSL 3225P03

25 32 25 32

25 25 25 25

150 170 150 170

26.5 26.5 26.5 26.5

46 46 46 46

24 24 24 24

195 195 195 195

0.6 0.9 0.6 0.9

3 3 3 3

LC..1603.. LC..1603.. LC..1603.. LC..1603..

CFSR 2525P04 CFSR 3225P04 CFSL 2525P04 CFSL 3225P04

25 25 25 25

170 170 170 170

26.5 26.5 26.5 26.5

55 55 55 55

32 32 32 32

195 195 195 195

0.7 0.9 0.7 0.9

4 4 4 4

LC..1604.. LC..1604.. LC..1604.. LC..1604..

CFSR 2525P05 CFSR 3225P05 CFSL 2525P05 CFSL 3225P05

25 32 25 32 32 25 32 25 32

25 25 25 25

170 170 170 170

26.5 26.5 26.5 26.5

66 66 66 66

40 40 40 40

195 195 195 195

0.7 0.9 0.7 0.9

5 5 5 5

LC..1605.. LC..1605.. LC..1605.. LC..1605..

CFSR 2525R06 CFSR 3225R06 CFSL 2525R06 CFSL 3225R06

25 32 25 32

25 25 25 25

200 200 200 200

26.5 26.5 26.5 26.5

81 81 81 81

48 48 48 48

195 195 195 195

0.8 1.0 0.8 1.0

6 6 6 6

LC..1606.. LC..1606.. LC..1606.. LC..1606..

CFSR 3225R08 CFSL 3225R08

32 32

25 25

200 200

28.0 28.0

104 104

64 64

195 195

1.2 1.2

8 8

LC..3008.. LC..3008..

** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF /LCMF 16.. = 14 mm and LCMF 30..= 28 mm

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06 ..08

Clamp screw/Key

TCEI0513 TCEI0613 TCEI0613 TCEI0815 TCEI1020

4 SMS795 5 SMS795 5 SMS795 6 SMS795 6 SMS795

Torque value Nm

6.0 8.0 8.0 10.0 15.0

MDT – Toolholders, external, Jetstream Tooling® Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFIR/L...JET, CFMR/L

CFIR/L ar = 3 x ap CFMR/L ar = 5 x ap

Right-hand version shown Inserts, please see page 54-61 Dimensions in mm

Seat size Application

Part. No.

ar**

CFIR 2020K03JET CFIR 2525M03JET CFIR 3225P03JET CFIL 2020K03JET CFIL 2525M03JET CFIL 3225P03JET

20 25 32 20 25 32

20 25 25 20 25 25

125 150 170 125 150 170

21.5 26.5 26.5 21.5 26.5 26.5

33 33 33 33 33 33

9 9 9 9 9 9

0.4 0.7 1.0 0.4 0.7 1.0

3 3 3 3 3 3

LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603..

CFIR 2020K04JET CFIR 2525M04JET CFIR 3225P04JET CFIL 2020K04JET CFIL 2525M04JET CFIL 3225P04JET

20 25 32 20 25 32

20 25 25 20 25 25

125 150 170 125 150 170

21.5 26.5 26.5 21.5 26.5 26.5

39 39 33 39 39 33

12 12 12 12 12 12

0.4 0.7 1.0 0.4 0.7 1.0

4 4 4 4 4 4

LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604..

CFIR 2020K05JET CFIR 2525M05JET CFIR 3225P05JET CFIL 2020K05JET CFIL 2525M05JET CFIL 3225P05JET

20 25 32 20 25 32

20 25 25 20 25 25

125 150 170 125 150 170

21.5 26.5 26.5 21.5 26.5 26.5

40 40 40 40 40 40

15 15 15 15 15 15

0.4 0.7 1.0 0.4 0.7 1.0

5 5 5 5 5 5

LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605..

CFIR 2020K06JET CFIR 2525M06JET CFIR 3225P06JET CFIL 2020K06JET CFIL 2525M06JET CFIL 3225P06JET

20 25 32 20 25 32

20 25 25 20 25 25

125 150 170 125 150 170

21.5 26.5 26.5 21.5 26.5 26.5

47 47 47 47 47 47

18 18 18 18 18 18

0.4 0.7 1.0 0.4 0.7 1.0

6 6 6 6 6 6

LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606..

CFIR 2525M08JET CFIR 3225P08JET CFIL 2525M08JET CFIL 3225P08JET

25 32 25 32

25 25 25 25

150 170 150 170

28.0 28.0 28.0 28.0

57 57 57 57

24 24 24 24

0.7 1.0 0.7 1.0

8 8 8 8

LC..3008.. LC..3008.. LC..3008.. LC..3008..

CFMR 2020K03JET CFMR 2525M03JET CFMR 3225P03JET CFML 2020K03JET CFML 2525M03JET CFML 3225P03JET

20 25 32 20 25 32

20 25 25 20 25 25

125 150 170 125 150 170

21 26.5 26.5 21.5 26.5 26.5

41 41 41 41 41 41

15 15 15 15 15 15

0.4 0.7 1.0 0.4 0.7 1.0

3 3 3 3 3 3

LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603..

CFMR 2020K04JET CFMR 2525M04JET CFMR 3225P04JET CFML 2020K04JET CFML 2525M04JET CFML 3225P04JET

20 25 32 20 25 32

20 25 25 20 25 25

125 150 170 125 150 170

21.5 26.5 26.5 21.5 26.5 26.5

41 41 41 41 41 41

20 20 20 20 20 20

0.4 0.6 0.9 0.4 0.6 0.9

4 4 4 4 4 4

LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604..

CFMR 2525K05JET CFMR 3225P05JET CFML 2525M05JET CFML 3225P05JET

25 32 25 32

25 25 25 25

125 170 150 170

26.5 26.5 26.5 26.5

41 41 41 41

25 25 25 25

0.6 0.9 0.6 0.9

5 5 5 5

LC..1605.. LC..1605.. LC..1605.. LC..1605..

CFMR 2525M06JET CFMR 3225P06JET CFML 2525M06JET CFML 3225P06JET

25 32 25 32

25 25 25 25

150 170 150 170

26.5 26.5 26.5 26.5

41 41 41 41

30 30 30 30

0.6 0.9 0.6 0.9

6 6 6 6

LC..1606.. LC..1606.. LC..1606.. LC..1606..

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06

Clamp screw/Key

TCEI0513 TCEI0613 TCEI0613 TCEI0815

4 SMS795 5 SMS795 5 SMS795 6 SMS795

Plug

Torque value Nm

JET-P1/8-5MM JET-P1/8-5MM JET-P1/8-5MM JET-P1/8-5MM

6.0 8.0 8.0 10.0

** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF /LCMF 16..= 14 mm and LCMF 30..= 28 mm

MDT – Toolholders, radial Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFIR/L1212../1616..

CFIR/L1212...

CFIR/L 2525../3225..

CFIR/L

ar = 3 x ap Right-hand version shown Inserts, please see page 54-61

Seat size Application

Part. No.

ar**

Dm2

CFIR 1212M03 CFIR 1616H03 CFIR 2020K03 CFIR 2525M03 CFIR 3225P03 CFIL 1212M03 CFIL 1616H03 CFIL 2020K03 CFIL 2525M03 CFIL 3225P03

12 16 20 25 32 12 16 20 25 32

12 16 20 25 25 12 16 20 25 25

150 100 125 150 170 150 100 125 150 170

12.0 16.0 20.0 26.5 26.5 12.0 16.0 21.5 26.5 26.5

30 28 28 28 28 30 28 28 28 28

9 9 9 9 9 9 9 9 9 9

– – – 195 195 – – – 195 195

0.2 0.2 0.4 0.7 1.0 0.2 0.2 0.4 0.7 1.0

3 3 3 3 3 3 3 3 3 3

LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603..

CFIR 1212M04 CFIR 1616H04 CFIR 2020K04 CFIR 2525M04 CFIR 3225P04 CFIL 1212M04 CFIL 1616H04 CFIL 2020K04 CFIL 2525M04 CFIL 3225P04

12 16 20 25 32 12 16 20 25 32

12 16 20 25 25 12 16 20 25 25

150 100 125 150 170 150 100 125 150 170

12.0 16.0 21.5 26.5 26.5 12.0 16.0 21.5 26.5 26.5

31 31 31 31 31 31 31 31 31 31

12 12 12 12 12 12 12 12 12 12

– – – 195 195 – – – 195 195

0.2 0.2 0.4 0.7 1.0 0.2 0.2 0.4 0.7 1.0

4 4 4 4 4 4 4 4 4 4

LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604..

CFIR 2020K05 CFIR 2525M05 CFIR 3225P05 CFIL 2020K05 CFIL 2525M05 CFIL 3225P05

20 25 32 20 25 32

20 25 25 20 25 25

125 150 170 125 150 170

21.5 26.5 26.5 21.5 26.5 26.5

35 35 35 35 35 35

15 15 15 15 15 15

– 195 195 – 195 195

0.4 0.7 0.8 0.4 0.7 0.8

5 5 5 5 5 5

LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605..

CFIR 2020K06 CFIR 2525M06 CFIR 3225P06 CFIL 2020K06 CFIL 2525M06 CFIL 3225P06

20 25 32 20 25 32

20 25 25 20 25 25

125 150 170 125 150 170

21.5 26.5 26.5 21.5 26.5 26.5

40 40 40 40 40 40

18 18 18 18 18 18

– 195 195 – 195 195

0.4 0.7 1.0 0.4 0.7 1.0

6 6 6 6 6 6

LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606..

CFIR 2525M08 CFIR 3225P08 CFIL 2525M08 CFIL 3225P08

25 32 25 32

25 25 25 25

150 170 150 170

28.0 28.0 28.0 28.0

55 55 55 55

24 24 24 24

195 195 195 195

0.7 1.0 0.7 1.0

8 8 8 8

LC..3008.. LC..3008.. LC..3008.. LC..3008..

** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF /LCMF 16..= 14 mm and LCMF 30..= 28 mm

Spare Parts, included in delivery Toolholder/ Insert Dimension

Clamp screw/Key

Torque value Nm

..1212M03 ..1616H03 ..2020K03 ..2525M03 ..3225P03 ..1212M04 ..1616H04 ..2020K04 ..2525M04 ..3225P04

TCEI0409 TCEI0509 TCEI0513 TCEI0513 TCEI0513 TCEI0409 TCEI0609 TCEI0613 TCEI0613 TCEI0613

3 SMS795 4 SMS795 4 SMS795 4 SMS795 4 SMS795 3 SMS795 5 SMS795 5 SMS795 5 SMS795 5 SMS795

2.5 6.0 6.0 6.0 6.0 3.5 8.0 8.0 8.0 8.0

..05 ..06 ..08

TCEI0613 TCEI0815 TCEI1020

5 SMS795 6 SMS795 6 SMS795

8.0 10.0 15.0

MDT – Toolholders, radial Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFMR/L 2525../3225..

CFMR/L

ar = 5 x ap Right-hand version shown Inserts, please see page 54-61

Seat size Application

Part. No.

ar**

Dm2

CFMR 2020K03 CFMR 2525M03 CFMR 3225P03 CFML 2020K03 CFML 2525M03 CFML 3225P03

20 25 32 20 25 32

20 25 25 20 25 25

125 150 170 125 150 170

21.5 26.5 26.5 21.5 26.5 26.5

34 34 34 34 34 34

15 15 15 15 15 15

– 195 195 – 195 195

0.4 0.7 1.0 0.4 0.7 1.0

3 3 3 3 3 3

LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603..

CFMR 2020K04 CFMR 2525M04 CFMR 3225P04 CFML 2020K04 CFML 2525M04 CFML 3225P04

20 25 32 20 25 32

20 25 25 20 25 25

125 150 170 125 150 170

21.5 26.5 26.5 21.5 26.5 26.5

39 39 39 39 39 39

20 20 20 20 20 20

– 195 195 – 195 195

0.4 0.7 1.0 0.4 0.7 1.0

4 4 4 4 4 4

LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604..

CFMR 2020K05 CFMR 2525M05 CFMR 3225P05 CFML 2020K05 CFML 2525M05 CFML 3225P05

20 25 32 20 25 32

20 25 25 20 25 25

125 150 170 125 150 170

21.5 26.5 26.5 21.5 26.5 26.5

50 50 50 50 50 50

25 25 25 25 25 25

– 195 195 – 195 195

0.4 0.6 0.9 0.4 0.6 0.9

5 5 5 5 5 5

LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605..

CFMR 2020M06 CFMR 2525M06 CFMR 3225P06 CFML 2020M06 CFML 2525M06 CFML 3225P06

20 25 32 20 25 32

20 25 25 20 25 25

150 150 170 150 150 170

21.5 26.5 26.5 21.5 26.5 26.5

60 60 60 60 60 60

30 30 30 30 30 30

– 195 195 – 195 195

0.4 0.6 0.9 0.4 0.6 0.9

6 6 6 6 6 6

LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606..

CFMR 2525P08 CFMR 3225P08 CFML 2525P08 CFML 3225P08

25 32 25 32

25 25 25 25

170 170 170 170

28 28 28 28

74 74 74 74

40 40 40 40

195 195 195 195

0.7 0.9 0.7 0.9

8 8 8 8

LC..3008.. LC..3008.. LC..3008.. LC..3008..

** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF /LCMF 16..= 14 mm and LCMF 30..= 28 mm

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06 ..08

Clamp screw/Key

TCEI0513 TCEI0613 TCEI0613 TCEI0815 TCEI1020

4 SMS795 5 SMS795 5 SMS795 6 SMS795 6 SMS795

Torque value Nm

6.0 8.0 8.0 10.0 15.0

Blades, modular, radial Blades for inserts LCGF, LCGN, LCMF and LCMR C.R/L

Right-hand version shown Holders, please see page 48 Inserts, please see page 54-61

Application

Part. No.

04 03 04 05

V21 -CIR1303 V21 -CIL1303 V21 -CMR1303 V21 -CML1303 V21 -CIR1304 V21 -CIL1304 V21 -CMR1304 V21 -CML1304 V21 -CMR1603 V21 -CML1603 V21 -CMR1604 V21 -CML1604 V21 -CIR1605 V21 -CIL1605 V21 -CMR1605 V21 -CML1605 V21 -CIR1606 V21 -CIL1606 V21 -CMR1606 V21 -CML1606

10 10 16 16 13 13 21 21 16 16 21 21 16 16 26 26 19 19 31 31

9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2

ar**

MDT – Toolholders, for MTM, seco-capto™

9 0.08 LC..1303.. 9 0.08 LC..1303.. 15 0.08 LC..1303.. 15 0.08 LC..1303.. 12 0.08 LC..1304.. 12 0.08 LC..1304.. 20 0.09 LC..1304.. 20 0.09 LC..1304.. 15 0.08 LC..1603.. 15 0.08 LC..1603.. 20 0.09 LC..1604.. 20 0.09 LC..1604.. 15 0.09 LC..1605.. 15 0.09 LC..1605.. 25 0.09 LC..1605.. 25 0.09 LC..1605.. 18 0.09 LC..1606.. 18 0.09 LC..1606.. 30 0.10 LC..1606.. 30 0.10 LC..1606.. ** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF /LCMF 13..= 11 mm and LCGF/LCMF 16..= 14 mm

Toolholders for inserts LCGN, LCMF and LCMR CDIL

Left-hand version shown Inserts, please see 54-61 Dimensions in mm Seat size Application

Part. No. 03 04 05 06 08

D5m

ar**

C6-CDIL-33090-03

1.6

LC..1603..

C6-CDIL-33090-04

1.6

LC..1604..

C6-CDIL-33090-05

1.6

LC..1605..

C6-CDIL-33090-06

1.6

LC..1606..

C6-CDIL-33090-08

1.6

LC..3008..

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06 ..08

Clamp screw/Key

TCEI0513 TCEI0613 TCEI0613 TCEI0815 TCEI1020

4 SMS795 5 SMS795 5 SMS795 6 SMS795 6 SMS795

Torque value Nm

6.0 8.0 8.0 10.0 15.0

** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF 16..= 14 mm and LCMF 30..= 28 mm

MDT – reinforced blades, radial Toolholders for inserts LCMF and LCMR l1

Hk h1

ar1

Blades up to D = 65 mm Inserts, please see page 54-61

Dimensions in mm Shape

Part. No.

CFTL26ITX1902RRB

CFZL26ITX2802RRB

ar1

Dmax

7.85

110

21.4

LCMF 1902..

7.85

119.5

21.4

10.6

LCMF 2802..

CFTL32ITX1902RRB

7.85

110

LCMF 1902..

CFZL32ITX2802RRB

7.85

119.5

52.5

LCMF 2802..

CFXL32ITX1603RRB

7.85

117.5

50.5

32.5

12.5

LCMR 1603..

CFTL26ITX1902LRB

7.85

110

21.4

LCMF 1902..

CFZL26ITX2802LRB

7.85

119.5

21.4

10.6

LCMF 2802..

CFTL32ITX1902LRB

7.85

110

LCMF 1902..

CFZL32ITX2802LRB

7.85

119.5

52.5

LCMF 2802..

CFXL32ITX1603LRB

7.85

117.5

50.5

32.5

12.5

LCMR 1603..

CFTR26ITX1902RRB

7.85

110

21.4

LCMF 1902..

CFZR26ITX2802RRB

7.85

119.5

21.4

10.6

LCMF 2802..

CFTR32ITX1902RRB

7.85

110

LCMF 1902..

CFZR32ITX2802RRB

7.85

119.5

52.5

LCMF 2802..

CFXR32ITX1603RRB

7.85

117.5

50.5

32.5

12.5

LCMR 1603..

CFTR26ITX1902LRB

7.85

110

21.4

LCMF 1902..

CFZR26ITX2802LRB

7.85

119.5

21.4

10.6

LCMF 2802..

CFTR32ITX1902LRB

7.85

110

LCMF 1902..

CFZR32ITX2802LRB

7.85

119.5

52.5

LCMF 2802..

CFXR32ITX1603LRB

7.85

117.5

50.5

32.5

12.5

LCMR 1603..

Spare Parts, included in delivery Clamp screw/Key

TCEI0412

3 SMS795

MDT â&#x20AC;&#x201C; reinforced blades, radial, Cutting data Cutting depth and min./max. feed (f) ap

min f

max f

LCMR-16-FT

3.0 mm

0.05 mm/rev

0.20 mm/rev

LCMF-19-FT

2.0 mm

0.04 mm/rev

0.10 mm/rev

LCMF-28-FT

2.0 mm

0.04 mm/rev

0.15 mm/rev

3.0 mm

0.05 mm/rev

0.35 mm/rev

Geometry FT

Geometry MC LCMR-16-MC

Cutting speed in m/min for f= 0.05 mm/rev Steel Seco Material Group

Stainless steel

CP500

260

230

220

180

155

150

200

170

165

100

CP600

240

220

200

170

140

145

190

165

155

100

Cast iron

Non-iron

Superalloys

Seco Material Group 12

CP500

150

120

115

500

400

295

CP600

450

360

260

Cutting speed in m/min for f= 0.1 mm/rev Steel Seco Material Group

Stainless steel

P 1

H 5

M 8

CP500

240

210

195

160

140

130

180

155

150

CP600

220

200

180

150

125

170

145

140

Cast iron

Non-iron

Superalloys

Seco Material Group 12

CP500

135

110

105

440

350

250

CP600

400

320

230

To classify the workpiece material please use the Seco material groups for basic cutting speed. These are depending from material, insert width, carbide grade and feed.

MDT - Toolholders, External, Jetstream Tooling®, seco-capto™ Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFIR...L...JET, CFIL...R...JET

* Initial plunge eg 080/055 (80 mm/55 mm Ø) Right-hand version with left-hand blade shown

Inserts, please see page 54-61

ar = 3 x ap

Dimensions in mm Application

Seat size

Seco-Capto Size

Initial plunge*

080/055 100/070 130/090 170/110 080/055 100/070 130/090 170/110 080/055 100/070 130/090 170/110 230/140 080/055 100/070 130/090 170/110 230/140 080/055 100/070 130/090 170/110 230/140 080/055 100/070 130/090 170/110 230/140 080/055 100/070 130/090 170/110 080/055 100/070 130/090 170/110 080/055 100/070 130/090 170/110 230/140 080/055 100/070 130/090 170/110 230/140 080/055 100/070 130/090 170/110 230/140 080/055 100/070 130/090 170/110 230/140 080/055 100/070 130/090 170/110 230/140 080/055 100/070 130/090 170/110 230/140

Part. No. C4-CFIR -27060-03L080055-JET C4-CFIR -27060-03L100070-JET C4-CFIR -27060-03L130090-JET C4-CFIR -27060-03L170110-JET C4-CFIL -27060-03R080055-JET C4-CFIL -27060-03R100070-JET C4-CFIL -27060-03R130090-JET C4-CFIL -27060-03R170110-JET C4-CFIR -27065-04L080055-JET C4-CFIR -27065-04L100070-JET C4-CFIR -27065-04L130090-JET C4-CFIR -27065-04L170110-JET C4-CFIR -27065-04L230140-JET C4-CFIL -27065-04R080055-JET C4-CFIL -27065-04R100070-JET C4-CFIL -27065-04R130090-JET C4-CFIL -27065-04R170110-JET C4-CFIL -27065-04R230140-JET C4-CFIR -27065-05L080055-JET C4-CFIR -27065-05L100070-JET C4-CFIR -27065-05L130090-JET C4-CFIR -27065-05L170110-JET C4-CFIR -27065-05L230140-JET C4-CFIL -27055-05R080055-JET C4-CFIL -27065-05R100070-JET C4-CFIL -27065-05R130090-JET C4-CFIL -27065-05R170110-JET C4-CFIL -27065-05R230140-JET C5-CFIR -35060-03L080055-JET C5-CFIR -35060-03L100070-JET C5-CFIR -35060-03L130090-JET C5-CFIR -35060-03L170110-JET C5-CFIL -35060-03R080055-JET C5-CFIL -35060-03R100070-JET C5-CFIL -35060-03R130090-JET C5-CFIL -35060-03R170110-JET C5-CFIR -35065-04L080055-JET C5-CFIR -35065-04L100070-JET C5-CFIR -35065-04L130090-JET C5-CFIR -35065-04L170110-JET C5-CFIR -35065-04L230140-JET C5-CFIL -35065-04R080055-JET C5-CFIL -35065-04R100070-JET C5-CFIL -35065-04R130090-JET C5-CFIL -35065-04R170110-JET C5-CFIL -35065-04R230140-JET C5-CFIR -35065-05L080055-JET C5-CFIR -35065-05L100070-JET C5-CFIR -35065-05L130090-JET C5-CFIR -35065-05L170110-JET C5-CFIR -35065-05L230140-JET C5-CFIL -35065-05R080055-JET C5-CFIL -35065-05R100070-JET C5-CFIL -35065-05R130090-JET C5-CFIL -35065-05R170110-JET C5-CFIL -35065-05R230140-JET C5-CFIR -35075-06L080055-JET C5-CFIR -35075-06L100070-JET C5-CFIR -35075-06L130090-JET C5-CFIR -35075-06L170110-JET C5-CFIR -35075-06L230140-JET C5-CFIL -35075-06R080055-JET C5-CFIL -35075-06R100070-JET C5-CFIL -35075-06R130090-JET C5-CFIL -35075-06R170110-JET C5-CFIL -35075-06R230140-JET

D5m

40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35

60 60 60 60 60 60 60 60 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 55 65 65 65 65 60 60 60 60 60 60 60 60 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 75 75 75 75 75 75 75 75 75 75

9 9 9 9 9 9 9 9 12 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 15 9 9 9 9 9 9 9 9 12 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 15 18 18 18 18 18 18 18 18 18 18

0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8

3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6

LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606..

* Part No. relates to initial plunge ** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF /LCMF 1605../1606 = 14 mm

MDT - Toolholders, External, Jetstream Tooling®, seco-capto™ Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFIR...L...JET, CFIL...R...JET

* Initial plunge eg 080/055 (80 mm/55 mm Ø) Right-hand version with left-hand blade shown

Inserts, please see page 54-61

ar = 3 x ap

Dimensions in mm Application

Seat size

Seco-Capto Size

Initial plunge*

Part. No. C6-CFIR -45065-03L080055-JET C6-CFIR -45065-03L100070-JET C6-CFIR -45065-03L130090-JET C6-CFIR -45065-03L170110-JET C6-CFIL -45065-03R080055-JET C6-CFIL -45065-03R100070-JET C6-CFIL -45065-03R130090-JET C6-CFIL -45065-03R170110-JET C6-CFIR -45065-04L080055-JET C6-CFIR -45065-04L100070-JET C6-CFIR -45065-04L130090-JET C6-CFIR -45065-04L170110-JET C6-CFIR -45065-04L230140-JET C6-CFIL -45065-04R080055-JET C6-CFIL -45065-04R100070-JET C6-CFIL -45065-04R130090-JET C6-CFIL -45065-04R170110-JET C6-CFIL -45065-04R230140-JET C6-CFIR -45070-05L080055-JET C6-CFIR -45070-05L100070-JET C6-CFIR -45070-05L130090-JET C6-CFIR -45070-05L170110-JET C6-CFIR -45070-05L230140-JET C6-CFIL -45070-05R080055-JET C6-CFIL -45070-05R100070-JET C6-CFIL -45070-05R130090-JET C6-CFIL -45070-05R170110-JET C6-CFIL -45070-05R230140-JET C6-CFIR -45075-06L080055-JET C6-CFIR -45075-06L100070-JET C6-CFIR -45075-06L130090-JET C6-CFIR -45075-06L170110-JET C6-CFIR -45075-06L230140-JET C6-CFIL -45075-06R080055-JET C6-CFIL -45075-06R100070-JET C6-CFIL -45075-06R130090-JET C6-CFIL -45075-06R170110-JET C6-CFIL -45075-06R230140-JET C6-CFIR -45085-08L130090-JET C6-CFIR -45085-08L170110-JET C6-CFIR -45085-08L230140-JET C6-CFIR -45085-08L500200-JET C6-CFIL -45085-08R130090-JET C6-CFIL -45085-08R170110-JET C6-CFIL -45085-08R230140-JET C6-CFIL -45085-08R500200-JET

D5m

ar**

63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63

45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45

65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 70 70 70 70 70 70 70 70 70 70 75 75 75 75 75 75 75 75 75 75 85 85 85 85 85 85 85 85

9 9 9 9 9 9 9 9 12 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 15 18 18 18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24

1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2

3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8

* Part. No relates to initial plunge ** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF /LCMF 1605../1606 = 14 mm and LCMF 30..= 28 mm

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06 ..08

Clamp screw/Key

TCEI0513 TCEI0613 TCEI0613 TCEI0815 TCEI1020

4 SMS795 5 SMS795 5 SMS795 6 SMS795 6 SMS795

Torque value Nm

6.0 8.0 8.0 10.0 15.0

mdt - Toolholders, Ext., axial, Jetstream Tooling®, seco-capto™ Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFOR...L...JET, CFOL...R...JET

* Initial plunge eg 080/055 (80 mm/55 mm Ø) Right-hand version with left-hand blade shown

Inserts, please see page 54-61

ar = 6 x ap

Dimensions in mm Application

Seat size

Seco-Capto Size

Initial plunge*

080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200

Part. No. C4-CFOR -27070-03L080055-JET C4-CFOR -27070-03L100070-JET C4-CFOR -27070-03L130090-JET C4-CFOR -27070-03L170110-JET C4-CFOR -27070-03L230140-JET C4-CFOR -27070-03L500200-JET C4-CFOL -27070-03R080055-JET C4-CFOL -27070-03R100070-JET C4-CFOL -27070-03R130090-JET C4-CFOL -27070-03R170110-JET C4-CFOL -27070-03R230140-JET C4-CFOL -27070-03R500200-JET C4-CFOR -27080-04L080055-JET C4-CFOR -27080-04L100070-JET C4-CFOR -27080-04L130090-JET C4-CFOR -27080-04L170110-JET C4-CFOR -27080-04L230140-JET C4-CFOR -27080-04L500200-JET C4-CFOL -27080-04R080055-JET C4-CFOL -27080-04R100070-JET C4-CFOL -27080-04R130090-JET C4-CFOL -27080-04R170110-JET C4-CFOL -27080-04R230140-JET C4-CFOL -27080-04R500200-JET C4-CFOR -27085-05L080055-JET C4-CFOR -27085-05L100070-JET C4-CFOR -27085-05L130090-JET C4-CFOR -27085-05L170110-JET C4-CFOR -27085-05L230140-JET C4-CFOR -27085-05L500200-JET C4-CFOL -27085-05R080055-JET C4-CFOL -27085-05R100070-JET C4-CFOL -27085-05R130090-JET C4-CFOL -27085-05R170110-JET C4-CFOL -27085-05R230140-JET C4-CFOL -27085-05R500200-JET C5-CFOR -35070-03L080055-JET C5-CFOR -35070-03L100070-JET C5-CFOR -35070-03L130090-JET C5-CFOR -35070-03L170110-JET C5-CFOR -35070-03L230140-JET C5-CFOR -35070-03L500200-JET C5-CFOL -35070-03R080055-JET C5-CFOL -35070-03R100070-JET C5-CFOL -35070-03R130090-JET C5-CFOL -35070-03R170110-JET C5-CFOL -35070-03R230140-JET C5-CFOL -35070-03R500200-JET C5-CFOR -35080-04L080055-JET C5-CFOR -35080-04L100070-JET C5-CFOR -35080-04L130090-JET C5-CFOR -35080-04L170110-JET C5-CFOR -35080-04L230140-JET C5-CFOR -35080-04L500200-JET C5-CFOL -35080-04R080055-JET C5-CFOL -35080-04R100070-JET C5-CFOL -35080-04R130090-JET C5-CFOL -35080-04R170110-JET C5-CFOL -35080-04R230140-JET C5-CFOL -35080-04R500200-JET

D5m

ar**

40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35

70 70 70 70 70 70 70 70 70 70 70 70 80 80 80 80 80 80 80 80 80 80 80 80 85 85 85 85 85 85 85 85 85 85 85 85 70 70 70 70 70 70 70 70 70 70 70 70 80 80 80 80 80 80 80 80 80 80 80 80

18 18 18 18 18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24 24 24 24 24 30 30 30 30 30 30 30 30 30 30 30 30 18 18 18 18 18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24 24 24 24 24

0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7

3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4

LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604..

* Part No. relates to initial plunge ** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF/LCGF 16.. = 14 mm

MDT - Toolholders, Ext., axial, Jetstream Tooling®, seco-capto™ Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFOR...L...JET, CFOL...R...JET

* Initial plunge eg 080/055 (80 mm/55 mm Ø) Right-hand version with left-hand blade shown

Inserts, please see page 54-61

ar = 6 x ap

Dimensions in mm Application

Seat size

Seco-Capto Size

Initial plunge*

080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200

Part. No. C5-CFOR -35085-05L080055-JET C5-CFOR -35085-05L100070-JET C5-CFOR -35085-05L130090-JET C5-CFOR -35085-05L170110-JET C5-CFOR -35085-05L230140-JET C5-CFOR -35085-05L500200-JET C5-CFOL -35085-05R080055-JET C5-CFOL -35085-05R100070-JET C5-CFOL -35085-05R130090-JET C5-CFOL -35085-05R170110-JET C5-CFOL -35085-05R230140-JET C5-CFOL -35085-05R500200-JET C5-CFOR -35100-06L080055-JET C5-CFOR -35100-06L100070-JET C5-CFOR -35100-06L130090-JET C5-CFOR -35100-06L170110-JET C5-CFOR -35100-06L230140-JET C5-CFOR -35100-06L500200-JET C5-CFOL -35100-06R100070-JET C5-CFOL -35100-06R130090-JET C5-CFOL -35100-06R170110-JET C5-CFOL -35100-06R230140-JET C5-CFOL -35100-06R500200-JET C6-CFOR -45075-03L080055-JET C6-CFOR -45075-03L100070-JET C6-CFOR -45075-03L130090-JET C6-CFOR -45075-03L170110-JET C6-CFOR -45075-03L230140-JET C6-CFOR -45075-03L500200-JET C6-CFOL -45075-03R080055-JET C6-CFOL -45075-03R100070-JET C6-CFOL -45075-03R130090-JET C6-CFOL -45075-03R170110-JET C6-CFOL -45075-03R230140-JET C6-CFOL -45075-03R500200-JET C6-CFOR -45080-04L080055-JET C6-CFOR -45080-04L100070-JET C6-CFOR -45080-04L130090-JET C6-CFOR -45080-04L170110-JET C6-CFOR -45080-04L230140-JET C6-CFOR -45080-04L500200-JET C6-CFOL -45080-04R080055-JET C6-CFOL -45080-04R100070-JET C6-CFOL -45080-04R130090-JET C6-CFOL -45080-04R170110-JET C6-CFOL -45080-04R230140-JET C6-CFOL -45080-04R500200-JET C6-CFOR -45090-05L080055-JET C6-CFOR -45090-05L100070-JET C6-CFOR -45090-05L130090-JET C6-CFOR -45090-05L170110-JET C6-CFOR -45090-05L230140-JET C6-CFOR -45090-05L500200-JET C6-CFOL -45090-05R080055-JET C6-CFOL -45090-05R100070-JET C6-CFOL -45090-05R130090-JET C6-CFOL -45090-05R170110-JET C6-CFOL -45090-05R230140-JET C6-CFOL -45090-05R500200-JET

D5m

ar**

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63

35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45

85 85 85 85 85 85 85 85 85 85 85 85 100 100 100 100 100 100 100 100 100 100 100 75 75 75 75 75 75 75 75 75 75 75 75 80 80 80 80 80 80 80 80 80 80 80 80 90 90 90 90 90 90 90 90 90 90 90 90

30 30 30 30 30 30 30 30 30 30 30 30 36 36 36 36 36 36 36 36 36 36 36 18 18 18 18 18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24 24 24 24 24 30 30 30 30 30 30 30 30 30 30 30 30

0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2

5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5

LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605..

* Part No. relates to initial plunge ** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF/LCGF 16.. = 14 mm

MDT - Toolholders, Ext., axial, Jetstream Tooling®, seco-capto™ Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFOR...L...JET, CFOL...R...JET

* Initial plunge eg 080/055 (80 mm/55 mm Ø) Right-hand version with left-hand blade shown

Inserts, please see page 54-61

ar = 6 x ap

Dimensions in mm Application

Seat size

Seco-Capto Size

Initial plunge*

080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 130/090 170/110 230/140 500/200 130/090 170/110 230/140 500/200

Part. No. C6-CFOR -45100-06L080055-JET C6-CFOR -45100-06L100070-JET C6-CFOR -45100-06L130090-JET C6-CFOR -45100-06L170110-JET C6-CFOR -45100-06L230140-JET C6-CFOR -45100-06L500200-JET C6-CFOL -45100-06R080055-JET C6-CFOL -45100-06R100070-JET C6-CFOL -45100-06R130090-JET C6-CFOL -45100-06R170110-JET C6-CFOL -45100-06R230140-JET C6-CFOL -45100-06R500200-JET C6-CFOR -45115-08L130090-JET C6-CFOR -45115-08L170110-JET C6-CFOR -45115-08L230140-JET C6-CFOR -45115-08L500200-JET C6-CFOL -45115-08R130090-JET C6-CFOL -45115-08R170110-JET C6-CFOL -45115-08R230140-JET C6-CFOL -45115-08R500200-JET

D5m

ar**

63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63

45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45

100 100 100 100 100 100 100 100 100 100 100 100 115 115 115 115 115 115 115 115

36 36 36 36 36 36 36 36 36 36 36 36 48 48 48 48 48 48 48 48

1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4

6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8

LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008..

* Part No. relates to initial plunge ** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edges: LCMF/LCGF 16.. = 14 mm and LCMF/LCGF 30.. = 28 mm

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06 ..08

Clamp screw/Key

TCEI0513 TCEI0613 TCEI0613 TCEI0815 TCEI1020

4 SMS795 5 SMS795 5 SMS795 6 SMS795 6 SMS795

Torque value Nm

6.0 8.0 8.0 10.0 15.0

MDT - Toolholders, EXt., axial, Jetstream Tooling®, seco-capto™ Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFOR...R...JET, CFOL...L...JET

* Initial plunge eg 080/055 (80 mm/55 mm Ø) Right-hand version with right-hand blade shown

Inserts, please see page 54-61

ar = 6 x ap

Dimensions in mm Application

Seat size

Seco-Capto Size

Initial plunge*

Part. No. C4-CFOR -27070-03R080055-JET C4-CFOR -27070-03R100070-JET C4-CFOR -27070-03R130090-JET C4-CFOR -27070-03R170110-JET C4-CFOR -27070-03R230140-JET C4-CFOR -27070-03R500200-JET C4-CFOL -27070-03L080055-JET C4-CFOL -27070-03L100070-JET C4-CFOL -27070-03L130090-JET C4-CFOL -27070-03L170110-JET C4-CFOL -27070-03L230140-JET C4-CFOL -27070-03L500200-JET C4-CFOR -27080-04R080055-JET C4-CFOR -27080-04R100070-JET C4-CFOR -27080-04R130090-JET C4-CFOR -27080-04R170110-JET C4-CFOR -27080-04R230140-JET C4-CFOR -27080-04R500200-JET C4-CFOL -27080-04L080055-JET C4-CFOL -27080-04L100070-JET C4-CFOL -27080-04L130090-JET C4-CFOL -27080-04L170110-JET C4-CFOL -27080-04L230140-JET C4-CFOL -27080-04L500200-JET C4-CFOR -27085-05R080055-JET C4-CFOR -27085-05R100070-JET C4-CFOR -27085-05R130090-JET C4-CFOR -27085-05R170110-JET C4-CFOR -27085-05R230140-JET C4-CFOR -27085-05R500200-JET C4-CFOL -27085-05L080055-JET C4-CFOL -27085-05L100070-JET C4-CFOL -27085-05L130090-JET C4-CFOL -27085-05L170110-JET C4-CFOL -27085-05L230140-JET C4-CFOL -27085-05L500200-JET C5-CFOR -35070-03R080055-JET C5-CFOR -35070-03R100070-JET C5-CFOR -35070-03R130090-JET C5-CFOR -35070-03R170110-JET C5-CFOR -35070-03R230140-JET C5-CFOR -35070-03R500200-JET C5-CFOL -35070-03L080055-JET C5-CFOL -35070-03L100070-JET C5-CFOL -35070-03L130090-JET C5-CFOL -35070-03L170110-JET C5-CFOL -35070-03L230140-JET C5-CFOL -35070-03L500200-JET C5-CFOR -35080-04R080055-JET C5-CFOR -35080-04R100070-JET C5-CFOR -35080-04R130090-JET C5-CFOR -35080-04R170110-JET C5-CFOR -35080-04R230140-JET C5-CFOR -35080-04R500200-JET C5-CFOL -35080-04L080055-JET C5-CFOL -35080-04L100070-JET C5-CFOL -35080-04L130090-JET C5-CFOL -35080-04L170110-JET C5-CFOL -35080-04L230140-JET C5-CFOL -35080-04L500200-JET

D5m

ar**

40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35

70 70 70 70 70 70 70 70 70 70 70 70 80 80 80 80 80 80 80 80 80 80 80 80 85 85 85 85 85 85 85 85 85 85 85 85 70 70 70 70 70 70 70 70 70 70 70 70 80 80 80 80 80 80 80 80 80 80 80 80

18 18 18 18 18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24 24 24 24 24 30 30 30 30 30 30 30 30 30 30 30 30 18 18 18 18 18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24 24 24 24 24

0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6

3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4

* Part No. relates to initial plunge ** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF/LCGF 16.. = 14 mm

MDT - Toolholders, Ext., axial, Jetstream Tooling®, seco-capto™ Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFOR...R...JET, CFOL...L...JET

* Initial plunge eg 080/055 (80 mm/55 mm Ø) Right-hand version with right-hand blade shown

Inserts, please see page 54-61

ar = 6 x ap

Dimensions in mm Application

Seat size

Seco-Capto Size

Initial plunge*

Part. No. C5-CFOR -35085-05R080055-JET C5-CFOR -35085-05R100070-JET C5-CFOR -35085-05R130090-JET C5-CFOR -35085-05R170110-JET C5-CFOR -35085-05R230140-JET C5-CFOR -35085-05R500200-JET C5-CFOL -35085-05L080055-JET C5-CFOL -35085-05L100070-JET C5-CFOL -35085-05L130090-JET C5-CFOL -35085-05L170110-JET C5-CFOL -35085-05L230140-JET C5-CFOL -35085-05L500200-JET C5-CFOR -35100-06R080055-JET C5-CFOR -35100-06R100070-JET C5-CFOR -35100-06R130090-JET C5-CFOR -35100-06R170110-JET C5-CFOR -35100-06R230140-JET C5-CFOR -35100-06R500200-JET C5-CFOL -35100-06L080055-JET C5-CFOL -35100-06L100070-JET C5-CFOL -35100-06L130090-JET C5-CFOL -35100-06L170110-JET C5-CFOL -35100-06L230140-JET C5-CFOL -35100-06L500200-JET C6-CFOR -45075-03R080055-JET C6-CFOR -45075-03R100070-JET C6-CFOR -45075-03R130090-JET C6-CFOR -45075-03R170110-JET C6-CFOR -45075-03R230140-JET C6-CFOR -45075-03R500200-JET C6-CFOL -45075-03L080055-JET C6-CFOL -45075-03L100070-JET C6-CFOL -45075-03L130090-JET C6-CFOL -45075-03L170110-JET C6-CFOL -45075-03L230140-JET C6-CFOL -45075-03L500200-JET C6-CFOR -45080-04R080055-JET C6-CFOR -45080-04R100070-JET C6-CFOR -45080-04R130090-JET C6-CFOR -45080-04R170110-JET C6-CFOR -45080-04R230140-JET C6-CFOR -45080-04R500200-JET C6-CFOL -45080-04L080055-JET C6-CFOL -45080-04L100070-JET C6-CFOL -45080-04L130090-JET C6-CFOL -45080-04L170110-JET C6-CFOL -45080-04L230140-JET C6-CFOL -45080-04L500200-JET C6-CFOR -45090-05R080055-JET C6-CFOR -45090-05R100070-JET C6-CFOR -45090-05R130090-JET C6-CFOR -45090-05R170110-JET C6-CFOR -45090-05R230140-JET C6-CFOR -45090-05R500200-JET C6-CFOL -45090-05L080055-JET C6-CFOL -45090-05L100070-JET C6-CFOL -45090-05L130090-JET C6-CFOL -45090-05L170110-JET C6-CFOL -45090-05L230140-JET C6-CFOL -45090-05L500200-JET

D5m

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63

35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45

85 85 85 85 85 85 85 85 85 85 85 85 100 100 100 100 100 100 100 100 100 100 100 100 75 75 75 75 75 75 75 75 75 75 75 75 80 80 80 80 80 80 80 80 80 80 80 80 90 90 90 90 90 90 90 90 90 90 90 90

30 30 30 30 30 30 30 30 30 30 30 30 36 36 36 36 36 36 36 36 36 36 36 36 18 18 18 18 18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24 24 24 24 24 30 30 30 30 30 30 30 30 30 30 30 30

0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.07

5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5

LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605..

* Part No. relates to initial plunge ** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF/LCGF 16.. = 14 mm

MDT - Toolholders, axial, Jetstream Tooling®, seco-capto™ Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFOR...R...JET, CFOL...L...JET

* Initial plunge eg 080/055 (80 mm/55 mm Ø) Right-hand version with right-hand blade shown

Inserts, please see page 54-61

ar = 6 x ap

Dimensions in mm Application

Seat size

Seco-Capto Size

Initial plunge*

080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 130/090 170/110 230/140 500/200 130/090 170/110 230/140 500/200

Part. No. C6-CFOR -45100-06R080055-JET C6-CFOR -45100-06R100070-JET C6-CFOR -45100-06R130090-JET C6-CFOR -45100-06R170110-JET C6-CFOR -45100-06R230140-JET C6-CFOR -45100-06R500200-JET C6-CFOL -45100-06L080055-JET C6-CFOL -45100-06L100070-JET C6-CFOL -45100-06L130090-JET C6-CFOL -45100-06L170110-JET C6-CFOL -45100-06L230140-JET C6-CFOL -45100-06L500200-JET C6-CFOR -45115-08R130090-JET C6-CFOR -45115-08R170110-JET C6-CFOR -45115-08R230140-JET C6-CFOR -45115-08R500200-JET C6-CFOL -45115-08L130090-JET C6-CFOL -45115-08L170110-JET C6-CFOL -45115-08L230140-JET C6-CFOL -45115-08L500200-JET

D5m

ar**

63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63

45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45

100 100 100 100 100 100 100 100 100 100 100 100 115 115 115 115 115 115 115 115

36 36 36 36 36 36 36 36 36 36 36 36 48 48 48 48 48 48 48 48

1.14 1.14 1.14 1.14 1.14 1.14 1.14 1.14 1.14 1.14 1.14 1.14 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3

6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8

*Part No. relates to initial plunge ** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF/LCGF 16.. = 14 mm and LCMF/LCGF 30.. = 28 mm

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06 ..08

Clamp screw/Key

TCEI0513 TCEI0613 TCEI0613 TCEI0815 TCEI1020

4 SMS795 5 SMS795 5 SMS795 6 SMS795 6 SMS795

Torque value Nm

6.0 8.0 8.0 10.0 15.0

MDT – Toolholders, external, axial, Jetstream Tooling® Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFIR...R...JET, CFIL...L...JET

* Initial plunge eg 130/090 (130 mm/90 mm Ø) Right-hand version with right-hand blade shown

Inserts, please see page 54-61

ar = 3 x ap

Dimensions in mm Seat size Application

Initial plunge* 080/055 100/070 130/090 170/110 080/055 100/070 130/090 170/110 080/055 100/070 130/090 170/110 230/140 080/055 100/070 130/090 170/110 230/140 080/055 100/070 130/090 170/110 230/140 080/055 100/070 130/090 170/110 230/140 080/055 100/070 130/090 170/110 230/140 080/055 100/070 130/090 170/110 230/140 130/090 170/110 230/140 500/200 130/090 170/110 230/140 500/200

Part. No. CFIR 2525M03R080055-JET CFIR 2525M03R100070-JET CFIR 2525M03R130090-JET CFIR 2525M03R170110-JET CFIL 2525M03L080055-JET CFIL 2525M03L100070-JET CFIL 2525M03L130090-JET CFIL 2525M03L170110-JET CFIR 2525M04R080055-JET CFIR 2525M04R100070-JET CFIR 2525M04R130090-JET CFIR 2525M04R170110-JET CFIR 2525M04R230140-JET CFIL 2525M04L080055-JET CFIL 2525M04L100070-JET CFIL 2525M04L130090-JET CFIL 2525M04L170110-JET CFIL 2525M04L230140-JET CFIR 2525M05R080055-JET CFIR 2525M05R100070-JET CFIR 2525M05R130090-JET CFIR 2525M05R170110-JET CFIR 2525M05R230140-JET CFIL 2525M05L080055-JET CFIL 2525M05L100070-JET CFIL 2525M05L130090-JET CFIL 2525M05L170110-JET CFIL 2525M05L230140-JET CFIR 2525M06R080055-JET CFIR 2525M06R100070-JET CFIR 2525M06R130090-JET CFIR 2525M06R170110-JET CFIR 2525M06R230140-JET CFIL 2525M06L080055-JET CFIL 2525M06L100070-JET CFIL 2525M06L130090-JET CFIL 2525M06L170110-JET CFIL 2525M06L230140-JET CFIR 3225P08R130090-JET CFIR 3225P08R170110-JET CFIR 3225P08R230140-JET CFIR 3225P08R500200-JET CFIL 3225P08L130090-JET CFIL 3225P08L170110-JET CFIL 3225P08L230140-JET CFIL 3225P08L500200-JET

ar**

ar1

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 32 32 32 32 32 32 32 32

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 170 170 170 170 170 170 170 170

26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

33 33 33 33 33 33 33 33 36 36 36 36 36 36 36 36 36 36 40 40 40 40 40 40 40 40 40 40 46 46 46 46 46 46 46 46 46 46 56 56 56 56 56 56 56 56

9 9 9 9 9 9 9 9 12 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 15 18 18 18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24

33 33 33 33 33 33 33 33 36 36 36 36 36 36 36 36 36 36 40 40 40 40 40 40 40 40 40 40 46 46 46 46 46 46 46 46 46 46 56 56 56 56 56 56 56 56

0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9

3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8

* Part No. relates to initial plunge ** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF/LCGF 1605/1606 = 14 mm

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06 ..08

Clamp screw/Key

TCEI0513 TCEI0613 TCEI0613 TCEI0815 TCEI1020

4 SMS795 5 SMS795 5 SMS795 6 SMS795 6 SMS795

Plug

Torque value Nm

JET-P1/8-5MM JET-P1/8-5MM JET-P1/8-5MM JET-P1/8-5MM JET-P1/8-5MM

6.0 8.0 8.0 10.0 15.0

MDT – Toolholders, external, axial, Jetstream Tooling® Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFOR...R...JET, CFOL...L...JET

* Initial plunge eg 080/055 (80 mm/55 mm Ø) Right-hand version with right-hand blade shown

Inserts, please see page 54-61

ar = 6 x ap

Dimensions in mm Seat size Application

Initial plunge* 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 080/055 100/070 130/090 170/110 230/140 500/200 130/090 170/110 230/140 500/200 130/090 170/110 230/140 500/200

Part. No. CFOR 2525M03L080055-JET CFOR 2525M03L100070-JET CFOR 2525M03L130090-JET CFOR 2525M03L170110-JET CFOR 2525M03L230140-JET CFOR 2525M03L500200-JET CFOL 2525M03R080055-JET CFOL 2525M03R100070-JET CFOL 2525M03R130090-JET CFOL 2525M03R170110-JET CFOL 2525M03R230140-JET CFOL 2525M03R500200-JET CFOR 2525M04L080055-JET CFOR 2525M04L100070-JET CFOR 2525M04L130090-JET CFOR 2525M04L170110-JET CFOR 2525M04L230140-JET CFOR 2525M04L500200-JET CFOL 2525M04R080055-JET CFOL 2525M04R100070-JET CFOL 2525M04R130090-JET CFOL 2525M04R170110-JET CFOL 2525M04R230140-JET CFOL 2525M04R500200-JET CFOR 2525M05L080055-JET CFOR 2525M05L100070-JET CFOR 2525M05L130090-JET CFOR 2525M05L170110-JET CFOR 2525M05L230140-JET CFOR 2525M05L500200-JET CFOL 2525M05R080055-JET CFOL 2525M05R100070-JET CFOL 2525M05R130090-JET CFOL 2525M05R170110-JET CFOL 2525M05R230140-JET CFOL 2525M05R500200-JET CFOR 2525M06L080055-JET CFOR 2525M06L100070-JET CFOR 2525M06L130090-JET CFOR 2525M06L170110-JET CFOR 2525M06L230140-JET CFOR 2525M06L500200-JET CFOL 2525M06R080055-JET CFOL 2525M06R100070-JET CFOL 2525M06R130090-JET CFOL 2525M06R170110-JET CFOL 2525M06R230140-JET CFOL 2525M06R500200-JET CFOR 3225P08L130090-JET CFOR 3225P08L170110-JET CFOR 3225P08L230140-JET CFOR 3225P08L500200-JET CFOL 3225P08R130090-JET CFOL 3225P08R170110-JET CFOL 3225P08R230140-JET CFOL 3225P08R500200-JET

..03 ..04 ..05 ..06 ..08

Clamp screw/Key

TCEI0513 TCEI0613 TCEI0613 TCEI0815 TCEI1020

4 SMS795 5 SMS795 5 SMS795 6 SMS795 6 SMS795

ar**

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 32 32 32 32 32 32 32 32

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 170 170 170 170 170 170 170 170

43 43 43 43 43 43 43 43 43 43 43 43 51 51 51 51 51 51 51 51 51 51 51 51 58 58 58 58 58 58 58 58 58 58 58 58 70 70 70 70 70 70 70 70 70 70 70 70 83 83 83 83 83 83 83 83

18 18 18 18 18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24 24 24 24 24 30 30 30 30 30 30 30 30 30 30 30 30 36 36 36 36 36 36 36 36 36 36 36 36 48 48 48 48 48 48 48 48

0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9

3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8

LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008..

* Part No. relates to initial plunge

Spare Parts, included in delivery Toolholder/ Insert Dimension

Plug

Torque value Nm

JET-P1/8-5MM JET-P1/8-5MM JET-P1/8-5MM JET-P1/8-5MM JET-P1/8-5MM

6.0 8.0 8.0 10.0 15.0

** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF/LCGF 16.. = 14 mm and LCMF/LCGF 30.. = 28 mm.

MDT – Toolholders, external, axial, Jetstream Tooling® Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFOR...R...JET, CFOL...L...JET

*Initial plunge eg 100/070 (100 mm/70 mm Ø) Right-hand version with right-hand blade shown

Inserts, please see page 54-61

ar = 6 x ap

Dimensions in mm Seat size Application

Part. No. CFOR 2525M03R080055-JET CFOR 2525M03R100070-JET CFOR 2525M03R130090-JET CFOR 2525M03R170110-JET CFOR 2525M03R230140-JET CFOR 2525M03R500200-JET CFOL 2525M03L080055-JET CFOL 2525M03L100070-JET CFOL 2525M03L130090-JET CFOL 2525M03L170110-JET CFOL 2525M03L230140-JET CFOL 2525M03L500200-JET CFOR 2525M04R080055-JET CFOR 2525M04R100070-JET CFOR 2525M04R130090-JET CFOR 2525M04R170110-JET CFOR 2525M04R230140-JET CFOR 2525M04R500200-JET CFOL 2525M04L080055-JET CFOL 2525M04L100070-JET CFOL 2525M04L130090-JET CFOL 2525M04L170110-JET CFOL 2525M04L230140-JET CFOL 2525M04L500200-JET CFOR 2525M05R080055-JET CFOR 2525M05R100070-JET CFOR 2525M05R130090-JET CFOR 2525M05R170110-JET CFOR 2525M05R230140-JET CFOR 2525M05R500200-JET CFOL 2525M05L080055-JET CFOL 2525M05L100070-JET CFOL 2525M05L130090-JET CFOL 2525M05L170110-JET CFOL 2525M05L230140-JET CFOL 2525M05L500200-JET CFOR 2525M06R080055-JET CFOR 2525M06R100070-JET CFOR 2525M06R130090-JET CFOR 2525M06R170110-JET CFOR 2525M06R230140-JET CFOR 2525M06R500200-JET CFOL 2525M06L080055-JET CFOL 2525M06L100070-JET CFOL 2525M06L130090-JET CFOL 2525M06L170110-JET CFOL 2525M06L230140-JET CFOL 2525M06L500200-JET CFOR 3225P08R130090-JET CFOR 3225P08R170110-JET CFOR 3225P08R230140-JET CFOR 3225P08R500200-JET CFOL 3225P08L130090-JET CFOL 3225P08L170110-JET CFOL 3225P08L230140-JET CFOL 3225P08L500200-JET

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06 ..08

Clamp screw/Key

TCEI0513 TCEI0613 TCEI0613 TCEI0815 TCEI1020

4 SMS795 5 SMS795 5 SMS795 6 SMS795 6 SMS795

ar**

ar1

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 32 32 32 32 32 32 32 32

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

43 43 43 43 43 43 43 43 43 43 43 43 51 51 51 51 51 51 51 51 51 51 51 51 59 59 59 59 59 59 59 59 59 59 59 59 70 70 70 70 70 70 70 70 70 70 70 70 83 83 83 83 83 83 83 83

18 18 18 18 18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24 24 24 24 24 30 30 30 30 30 30 30 30 30 30 30 30 36 36 36 36 36 36 36 36 36 36 36 36 48 48 48 48 48 48 48 48

43 43 43 43 43 43 43 43 43 43 43 43 51 51 51 51 51 51 51 51 51 51 51 51 59 59 59 59 59 59 59 59 59 59 59 59 70 70 70 70 70 70 70 70 70 70 70 70 83 83 83 83 83 83 83 83

0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8

3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8

LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008..

* Part No. relates to initial plunge Plug

Torque value Nm

JET-P1/8-5MM JET-P1/8-5MM JET-P1/8-5MM JET-P1/8-5MM JET-P1/8-5MM

6.0 8.0 8.0 10.0 15.0

** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF/LCGF 1605/1606 = 14mm

MDT – Toolholders, external, axial, Jetstream Tooling® Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFIR...L...JET, CFIL...R...JET

* Initial plunge eg 100/070 (100 mm/070 mm Ø) Right-hand version with right-hand blade shown

Inserts, please see page 54-61

ar = 3 x ap

Dimensions in mm Seat size Application

Initial plunge*

Part. No.

ar**

080/055 080/055

CFIR 2525M03L080055-JET CFIL 2525M03R080055-JET

25 25

150 150

26.5 26.5

33 33

9 9

0.7 0.7

3 3

LC..1603.. LC..1603..

080/055 080/055

CFIR 2525M04L080055-JET CFIL 2525M04R080055-JET

25 25

150 150

26.5 26.5

36 36

12 12

0.7 0.7

4 4

LC..1604.. LC..1604..

080/055 080/055

CFIR 2525M05L080055-JET CFIL 2525M05R080055-JET

25 25

150 150

26.5 26.5

40 40

15 15

0.7 0.7

5 5

LC..1605.. LC..1605..

080/055 080/055

CFIR 2525M06L080055-JET CFIL 2525M06R080055-JET

25 25

150 150

26.5 26.5

46 46

18 18

0.7 0.7

6 6

LC..1606.. LC..1606..

* Part No. relates to initial plunge ** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edges: LCMF/LCGF 1605/1606.. = 14 mm

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06

Clamp screw/Key

TCEI0513 TCEI0613 TCEI0613 TCEI0815

4 SMS795 5 SMS795 5 SMS795 6 SMS795

Plug

Torque value Nm

JET-P1/8-5MM JET-P1/8-5MM JET-P1/8-5MM JET-P1/8-5MM

6.0 8.0 8.0 10.0

MDT – Toolholders, external, axial Toolholders for inserts LCGF, LCGN, LCMF and LCMR CFIR/L

* Initial plunge eg 100/070 (100 mm/70 mm Ø) Right-hand version with right-hand blade shown

Inserts, please see page 54-61

ar = 3 x ap

Dimensions in mm Seat size Application

Initial plunge* 100/070 130/090 170/110 100/070 130/090 170/110 100/070 130/090 170/110 230/140 100/070 130/090 170/110 230/140 100/070 130/090 170/110 230/140 100/070 130/090 170/110 230/140 100/070 130/090 170/110 230/140 100/070 130/090 170/110 230/140 130/090 170/110 230/140 500/200 130/090 170/110 230/140 500/200

Part. No. CFIR 2525M03L100070 CFIR 2525M03L130090 CFIR 2525M03L170110 CFIL 2525M03R100070 CFIL 2525M03R130090 CFIL 2525M03R170110 CFIR 2525M04L100070 CFIR 2525M04L130090 CFIR 2525M04L170110 CFIR 2525M04L230140 CFIL 2525M04R100070 CFIL 2525M04R130090 CFIL 2525M04R170110 CFIL 2525M04R230140 CFIR 2525M05L100070 CFIR 2525M05L130090 CFIR 2525M05L170110 CFIR 2525M05L230140 CFIL 2525M05R100070 CFIL 2525M05R130090 CFIL 2525M05R170110 CFIL 2525M05R230140 CFIR 2525M06L100070 CFIR 2525M06L130090 CFIR 2525M06L170110 CFIR 2525M06L230140 CFIL 2525M06R100070 CFIL 2525M06R130090 CFIL 2525M06R170110 CFIL 2525M06R230140 CFIR 3225P08L130090 CFIR 3225P08L170110 CFIR 3225P08L230140 CFIR 3225P08L500200 CFIL 3225P08R130090 CFIL 3225P08R170110 CFIL 3225P08R230140 CFIL 3225P08R500200

ar**

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 32 32 32 32 32 32 32 32

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 170 170 170 170 170 170 170 170

26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 28 28 28 28 28 28 28 28

28 28 28 28 28 28 31 31 31 31 31 31 31 31 35 35 35 35 35 35 35 35 42 42 42 42 42 42 42 42 50 50 50 50 50 50 50 50

9 9 9 9 9 9 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24

0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

3 3 3 3 3 3 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8

LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1603.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1604.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1605.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..1606.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008.. LC..3008..

* Part No. relates to initial plunge ** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF/LCGF 1605/1606.. = 14 mm

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06 ..08

Clamp screw/Key

TCEI0513 TCEI0613 TCEI0613 TCEI0815 TCEI1020

4 SMS795 5 SMS795 5 SMS795 6 SMS795 6 SMS795

Torque value Nm

6.0 8.0 8.0 10.0 15.0

MDT – Toolholders, external, axial, 90° angle Toolholders for inserts LCGF, LCGN, LCMF and LCMR CGIR/L

* Initial plunge eg 100/070 (100 mm/70 mm Ø) Right-hand version with right-hand blade shown

Inserts, please see page 54-61

ar = 3 x ap

Dimensions in mm Seat size Application

Part. No. CGIR 2525M03R100070 CGIR 2525M03R130090 CGIR 2525M03R170110 CGIL 2525M03L100070 CGIL 2525M03L130090 CGIL 2525M03L170110 CGIR 2525M04R100070 CGIR 2525M04R130090 CGIR 2525M04R170110 CGIR 2525M04R230140 CGIL 2525M04L100070 CGIL 2525M04L130090 CGIL 2525M04L170110 CGIL 2525M04L230140 CGIR 2525M05R100070 CGIR 2525M05R130090 CGIR 2525M05R170110 CGIR 2525M05R230140 CGIL 2525M05L100070 CGIL 2525M05L130090 CGIL 2525M05L170110 CGIL 2525M05L230140 CGIR 2525M06R100070 CGIR 2525M06R130090 CGIR 2525M06R170110 CGIR 2525M06R230140 CGIL 2525M06L100070 CGIL 2525M06L130090 CGIL 2525M06L170110 CGIL 2525M06L230140 CGIR 3225P08R130090 CGIR 3225P08R170110 CGIR 3225P08R230140 CGIR 3225P08R500200 CGIL 3225P08L130090 CGIL 3225P08L170110 CGIL 3225P08L230140 CGIL 3225P08L500200

ar**

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 32 32 32 32 32 32 32 32

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 170 170 170 170 170 170 170 170

35.4 35.4 35.4 35.4 35.4 35.4 38.4 38.4 38.4 38.4 38.4 38.4 38.4 38.4 41.4 41.4 41.4 41.4 41.4 41.4 41.4 41.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4 50.4 50.4 50.4 50.4 50.4 50.4 50.4 50.4

32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 50 50 50 50 50 50 50 50

9 9 9 9 9 9 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24

0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1

3 3 3 3 3 3 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8

* Part No. relates to initial plunge ** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF/LCGF 1605/1606.. = 14 mm

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06 ..08

Clamp screw/Key

TCEI0513 TCEI0613 TCEI0613 TCEI0815 TCEI1020

4 SMS795 5 SMS795 5 SMS795 6 SMS795 6 SMS795

Torque value Nm

6.0 8.0 8.0 10.0 15.0

MDT – holders, internal, seco-capto™ Toolholders for inserts LCGA, LCGF, LCGN, LCMF and LCMR CG.R/L

Right-hand version Inserts, please see page 54-61 Dimensions in mm Application

Seco-Capto Size

03 C4 04

D5m

Dm min

C4-CGER -11065-1303 C4-CGEL -11065-1303 C4-CGFR -15075-1303 C4-CGFL -15075-1303

16 16 20 20

40 40 40 40

10.0 10.0 14.5 14.5

65 65 75 75

43 43 53 53

25 25 30 30

3.0 3.0 4.5 4.5

16 16 20 20

0.3 0.3 0.4 0.4

3 3 3 3

LC..1303.. LC..1303.. LC..1303.. LC..1303..

C4-CGFR -15075-1304 C4-CGFL -15075-1304

20 20

40 40

14.5 14.5

75 75

53 53

30 30

5.5 5.5

20 20

0.4 0.4

4 4

LC..1304.. LC..1304..

C5-CGER -11065-1303 C5-CGEL -11065-1303 C5-CGFR -15075-1303 C5-CGFL -15075-1303 C5-CGHR -19080-1303 C5-CGHL -19080-1303 C5-CGJR -26110-1303 C5-CGJL -26110-1303

16 16 20 20 23 23 30 30

50 50 50 50 50 50 50 50

10.0 10.0 14.5 14.5 19.0 19.0 25.5 25.5

65 65 75 75 80 80 110 110

43 43 53 53 58 58 88 88

25 25 30 30 40 40 50 50

3.0 3.0 4.5 4.5 7.5 7.5 10.5 10.5

16 16 20 20 25 25 32 32

0.5 0.5 0.5 0.5 0.6 0.6 0.8 0.8

3 3 3 3 3 3 3 3

LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303..

C5-CGFR -15075-1304 C5-CGFR -19080-1304 C5-CGFL -15075-1304 C5-CGFL -19080-1304 C5-CGHR -26110-1304 C5-CGHL -26110-1304

20 25 20 25 30 30

50 50 50 50 50 50

14.5 19.0 14.5 19.0 25.5 25.5

75 80 75 80 110 110

53 58 53 58 88 88

30 40 30 40 50 50

4.5 6.0 4.5 6.0 10.0 10.0

20 25 20 25 32 32

0.5 0.6 0.5 0.6 0.8 0.8

4 4 4 4 4 4

LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304..

C6-CGER -11065-1303 C6-CGEL -11065-1303 C6-CGFR -15075-1303 C6-CGFL -15075-1303 C6-CGHR -19080-1303 C6-CGHL -19080-1303 C6-CGJR -26110-1303 C6-CGJL -26110-1303

14 14 18 18 23 23 30 30

63 63 63 63 63 63 63 63

10.0 10.0 14.5 14.5 19.0 19.0 25.5 25.5

65 65 75 75 80 80 110 110

41 41 51 51 56 56 86 86

25 25 30 30 40 40 50 50

3.0 3.0 5.5 5.5 7.5 7.5 10.5 10.5

16 16 20 20 25 25 32 32

0.8 0.8 0.8 0.8 0.9 0.9 1.1 1.1

3 3 3 3 3 3 3 3

LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303..

C6-CGFR -15075-1304 C6-CGFR -19080-1304 C6-CGFL -15075-1304 C6-CGFL -19080-1304 C6-CGHR -26110-1304 C6-CGHL -26110-1304

18 23 18 23 30 30

63 63 63 63 63 63

14.5 19.0 14.5 19.0 25.5 25.5

75 80 75 80 110 110

51 56 51 56 86 86

30 40 30 40 50 50

5.5 7.5 5.5 7.5 10.0 10.0

20 25 20 25 32 32

0.8 0.9 0.8 0.9 1.1 1.1

4 4 4 4 4 4

LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304..

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04

Clamp screw/Key

L85011-T15P L85011-T15P

T15P-7 T15P-7

Seat size

Part. No.

Torque value Nm

5.0 5.0

MDT – holders, internal, seco-capto™ Toolholders for inserts LCGF, LCGN, LCMF and LCMR CG.R/L

Right-hand version Inserts, please see page 54-61 Dimensions in mm Application

Seco-Capto Size

Part. No.

D5m

Dm min

Seat size

C4-CGIR -24090-1603 C4-CGIL -24090-1603

30 30

40 40

24 24

90 90

70 70

50 50

9 9

32 32

0.4 0.4

3 3

LC..1603.. LC..1603..

C4-CGGR -24090-1604 C4-CGGL -24090-1604

30 30

40 40

24 24

90 90

70 70

50 50

9 9

32 32

0.4 0.4

4 4

LC..1604.. LC..1604..

C4-CGFR -24090-1605 C4-CGFL -24090-1605

30 30

40 40

24 24

90 90

70 70

50 50

9 9

32 32

0.4 0.4

5 5

LC..1605.. LC..1605..

C5-CGIR -24090-1603 C5-CGIL -24090-1603

30 30

50 50

24 24

90 90

70 70

50 50

9 9

32 32

0.6 0.6

3 3

LC..1603.. LC..1603..

C5-CGGR -24090-1604 C5-CGGL -24090-1604

30 30

50 50

24 24

90 90

70 70

50 50

9 9

32 32

0.6 0.6

4 4

LC..1604.. LC..1604..

C5-CGFR -24090-1605 C5-CGFL -24090-1605

30 30

50 50

24 24

90 90

70 70

50 50

9 9

32 32

0.6 0.6

5 5

LC..1605.. LC..1605..

C5-CGFR -24090-1606 C5-CGFL -24090-1606

30 30

50 50

24 24

90 90

70 70

50 50

9 9

32 32

0.6 0.6

6 6

LC..1606.. LC..1606..

C6-CGIR -24095-1603 C6-CGIL -24095-1603

30 30

63 63

24 24

95 95

73 73

50 50

9 9

32 32

1.0 1.0

3 3

LC..1603.. LC..1603..

C6-CGGR -24095-1604 C6-CGGL -24095-1604

30 30

63 63

24 24

95 95

73 73

50 50

9 9

32 32

1.0 1.0

4 4

LC..1604.. LC..1604..

C6-CGFR -24095-1605 C6-CGFL -24095-1605

30 30

63 63

24 24

95 95

73 73

50 50

9 9

32 32

1.0 1.0

5 5

LC..1605.. LC..1605..

C6-CGFR -24095-1606 C6-CGFL -24095-1606

30 30

63 63

24 24

95 95

73 73

50 50

9 9

32 32

1.0 1.0

6 6

LC..1606.. LC..1606..

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06

Clamp screw/Key

L85011-T15P L85011-T15P T86015-T20P T86015-T20P

T15P-7 T15P-7 T20P-7 T20P-7

Torque value Nm

5.0 5.0 6.0 6.0

MDT – holders, internal, seco-capto™ Toolholders for inserts LCGF, LCGN, LCMF and LCMR CGGR/L

Right-hand version Inserts, please see pages 54-61 Dimensions in mm Application

Seco-Capto Size

Part. No.

Dm min

Seat size

35.0 35.0

40 40

25.0 25.0

90 90

70 70

6 6

45 45

0.7 0.7

3 3

LC..1603.. LC..1603..

C4-CGGR -27090-04 C4-CGGL -27090-04

35.0 35.0

40 40

27.0 27.0

90 90

70 70

8 8

45 45

0.7 0.7

4 4

LC..1604.. LC..1604..

C4-CGGR -28090-05 C4-CGGL -28090-05

32.5 32.5

40 40

27.7 27.7

90 90

63 63

10 10

45 45

0.7 0.7

5 5

LC..1605.. LC..1605..

C5-CGGR -25090-03 C5-CGGL -25090-03

35.0 35.0

50 50

25.0 25.0

90 90

70 70

6 6

45 45

0.8 0.8

3 3

LC..1603.. LC..1603..

C5-CGGR -27090-04 C5-CGGL -27090-04

35.0 35.0

50 50

27.0 27.0

90 90

70 70

8 8

45 45

0.8 0.8

4 4

LC..1604.. LC..1604..

C5-CGGR -28090-05 C5-CGGL -28090-05

32.5 32.5

50 50

27.7 27.7

90 90

63 63

10 10

45 45

0.8 0.8

5 5

LC..1605.. LC..1605..

C5-CGGR -29090-06 C5-CGGL -29090-06

30.5 30.5

50 50

28.7 28.7

90 90

62 62

12 12

45 45

0.8 0.8

6 6

LC..1606.. LC..1606..

C6-CGGR -25095-03 C6-CGGL -25095-03

35.0 35.0

63 63

25.0 25.0

95 95

73 73

6 6

45 45

1.3 1.3

3 3

LC..1603.. LC..1603..

C6-CGGR -27095-04 C6-CGGL -27095-04

35.0 35.0

63 63

27.0 27.0

95 95

73 73

8 8

45 45

1.3 1.3

4 4

LC..1604.. LC..1604..

C6-CGGR -28095-05 C6-CGGL -28095-05

32.5 32.5

63 63

27.7 27.7

95 95

68 68

10 10

45 45

1.3 1.3

5 5

LC..1605.. LC..1605..

C6-CGGR -29095-06 C6-CGGL -29095-06

30.5 30.5

63 63

28.7 28.7

95 95

67 67

12 12

45 45

1.3 1.3

6 6

LC..1606.. LC..1606..

Spare Parts, included in delivery Clamp screw/Key

MC6S4x14 MC6S5x14 MC6S6X14 TCEI06x14

C4-CGGR -25090-03 C4-CGGL -25090-03

..03 ..04 ..05 ..06

D5m

Toolholder/ Insert Dimension

3 SMS795 4 SMS795 4 SMS795 5 SMS795

Torque value Nm

3.5 5.0 5.0 8.0

MDT – holders, internal, seco-capto™ Toolholders for inserts LCGF, LCGN, LCMF and LCMR CGHR/L, CGJR/L

Right-hand version Inserts, please see pages 54-61 Dimensions in mm Application

Holder

CGHR/L ar = 5.5 mm

CGJR/L ar = 7.5 mm

Seat size

D5m

Dm min

C4-CGHR-15075-1902 C4-CGHL-15075-1902

18 18

40 40

14.5 14.5

75 75

53 53

30 30

5.5 5.5

20 20

0.30 0.30

2 2

LC..1902.. LC..1902..

C5-CGHR-15075-1902 C5-CGHL-15075-1902

18 18

50 50

14.5 14.5

75 75

53 53

30 30

5.5 5.5

20 20

0.48 0.48

2 2

LC..1902.. LC..1902..

C6-CGHR-15075-1902 C6-CGHL-15075-1902

18 18

60 60

14.5 14.5

75 75

51 51

30 30

5.5 5.5

20 20

0.82 0.82

2 2

LC..1902.. LC..1902..

C4-CGJR-19080-1902 C4-CGJL-19080-1902

23 23

40 40

19.0 19.0

80 80

58 58

30 30

7.5 7.5

25 25

0.36 0.36

2 2

LC..1902.. LC..1902..

C5-CGJR-19080-1902 C5-CGJL-19080-1902

23 23

50 50

19.0 19.0

80 80

58 58

30 30

7.5 7.5

25 25

0.54 0.54

2 2

LC..1902.. LC..1902..

C6-CGJR-19080-1902 C6-CGJL-19080-1902

23 23

60 60

19.0 19.0

80 80

56 56

30 30

7.5 7.5

25 25

0.87 0.87

2 2

LC..1902.. LC..1902..

Part. No.

Spare Parts, included in delivery Toolholder/ Insert Dimension

..02

Clamp screw/Key

L85011-T15P

T15P-7

Torque value Nm

5.0

MDT â&#x20AC;&#x201C; Toolholders, internal Toolholders for inserts LCGA, LCGF, LCGN, LCMF and LCMR CG.R/L

Right-hand version Inserts, please see pages 54-61 Dimensions in mm Application

Part. No.

A16Q-CGER1303 A16Q-CGEL1303 A20R-CGFR1303 A20R-CGFL1303 A25S-CGHR1303 A25S-CGHL1303 A32T-CGJR1303 A32T-CGJL1303 A20R-CGFR1304 A25S-CGFR1304 A20R-CGFL1304 A25S-CGFL1304 A32T-CGHR1304 A32T-CGHL1304

Dmm

16 16 20 20 25 25 32 32 20 25 20 25 32 32

15 15 18 18 23 23 30 30 18 23 18 23 30 30

15.5 15.5 19.0 19.0 24.0 24.0 31.0 31.0 19.0 24.0 19.0 24.0 31.0 31.0

180 180 200 200 250 250 300 300 200 250 200 250 300 300

40 40 52 52 64 64 77 77 52 64 52 64 77 77

25 25 30 30 40 40 50 50 30 40 30 40 50 50

10.2 10.2 14.5 14.5 19.0 19.0 25.5 25.5 14.5 19.0 14.5 19.0 25.5 25.5

3.0 3.0 5.5 5.5 7.5 7.5 10.5 10.5 5.5 7.5 5.5 7.5 10.5 10.5

Dm min 16 16 20 20 25 25 32 32 20 25 20 25 32 32

Seat size 0.2 0.2 0.4 0.4 0.7 0.7 1.5 1.5 0.4 0.7 0.4 0.7 1.5 1.5

3 3 3 3 3 3 3 3 4 4 4 4 4 4

LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304..

Spare Parts, included in delivery Toolholder/ Insert Dimension

A16Q-.. A20R-.. A25S-.. A32T-..

Clamp screw/Key

L85011-T15P L85011-T15P L85011-T15P L85011-T15P

T15P-7 T15P-7 T15P-7 T15P-7

Coolant adapter*

SEAL16 SEAL20 SEAL25 SEAL32

Torque value Nm

5.0 5.0 5.0 5.0 * to be ordered separately

Toolholders for inserts LCMF 1902 CGHR/L, CGJR/L

Right-hand version Inserts, please see pages 54-61 Dimensions in mm Application

Part. No.

Dmm

Dm min

A20R-CGHR1902 A20R-CGHL1902

20 20

18 18

19 19

200 200

52 52

30 30

14.5 14.5

5.5 5.5

20 20

0.35 0.35

2 2

LC..1902.. LC..1902..

A25S-CGJR1902 A25S-CGJL1902

25 25

23 23

24 24

250 250

64 64

40 40

19.0 19.0

7.5 7.5

25 25

0.74 0.74

2 2

LC..1902.. LC..1902..

Spare Parts, included in delivery Toolholder/ Insert Dimension

A20.-.. A25.-..

Clamp screw/Key

L85011-T15P L85011-T15P

Seat size

T15P-7 T15P-7

Coolant adapter*

SEAL20 SEAL25

Torque value Nm

5.0 5.0 * to be ordered separately

MDT â&#x20AC;&#x201C; Toolholders, internal Toolholders for inserts LCGF, LCGN, LCMF and LCMR CG.R/L

Right-hand version Inserts, please see pages 54-61 Dimensions in mm Application

Part. No. 03 04 05 06

A32T-CGIR1603 A32T-CGIL1603 A32T-CGGR1604 A32T-CGGL1604 A32T-CGFR1605 A32T-CGFL1605 A32T-CGFR1606 A32T-CGFL1606

Dmm

32 32 32 32 32 32 32 32

30 30 30 30 30 30 30 30

31 31 31 31 31 31 31 31

300 300 300 300 300 300 300 300

60 60 60 60 60 60 60 60

50 50 50 50 50 50 50 50

24 24 24 24 24 24 24 24

9 9 9 9 9 9 9 9

Dm min 32 32 32 32 32 32 32 32

Seat size 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

3 3 4 4 5 5 6 6

LC..1603.. LC..1603.. LC..1604.. LC..1604.. LC..1605.. LC..1605.. LC..1606.. LC..1606..

Spare Parts, included in delivery Toolholder/ Insert Dimension

..03 ..04 ..05 ..06

Clamp screw/Key

L85011-T15P L85011-T15P L86015-T20P L86015-T20P

T15P-7 T15P-7 T20P-7 T20P-7

Coolant adapter*

SEAL32 SEAL32 SEAL32 SEAL32

Torque value Nm

5.0 5.0 6.0 6.0 *to be ordered separately

Toolholders for inserts LCGF, LCGN, LCMF and LCMR CGGR/L

Right-hand version Inserts, please see pages 54-61 Dimensions in mm Application 03 04 05 06

Dmm

Dm min

ar*

A40T-CGGR03 A40T-CGGL03 A40T-CGGR04 A40T-CGGL04 A40T-CGGR05 A40T-CGGL05 A40T-CGGR06 A40T-CGGL06

40 40 40 40 40 40 40 40

37 37 37 37 37 37 37 37

38.5 38.5 38.5 38.5 38.5 38.5 38.5 38.5

300 300 300 300 300 300 300 300

60 60 60 60 60 60 60 60

26 26 27 27 28 28 29 29

6 6 8 8 10 10 12 12

45 45 45 45 45 45 45 45

5.5 5.5 6.5 6.5 7.5 7.5 8.5 8.5

A40T-..03 A40T-..04 A40T-..05 A40T-..06

Clamp screw/Key

MC6S4x14 MC6S5x14 MC6S6X14 TCEI06x14

3 SMS795 4 SMS795 4 SMS795 5 SMS795

2.5 2.5 2.4 2.4 2.4 2.4 2.4 2.4

3 3 4 4 5 5 6 6

LC..1603.. LC..1603.. LC..1604.. LC..1604.. LC..1605.. LC..1605.. LC..1606.. LC..1606..

* If toolholder enters bore more than l3

Spare Parts, included in delivery Toolholder/ Insert Dimension

Seat size

Part. No.

Coolant adapter*

SEAL40 SEAL40 SEAL40 SEAL40

Torque value Nm

3.5 5.0 5.0 8.0 * to be ordered separately

MDT – Holders, external, modular Toolholder GR/L

FR/L

SR/L

GR/L

FR/L

SR/L

Right-hand version

Inserts, please see pages 54-61

Dimensions in mm Application Seco Capto

Part. No.

D5m

ls1

C4-GR-21050-V21 C4-GL-21050-V21

40 40

21.0 21.0

– –

50 50

0.5 0.5

C5-GR-29060-V21 C5-GL-29060-V21

50 50

26.0 26.0

– –

60 60

0.9 0.9

C6-GR-39065-V21 C6-GL-39065-V21

63 63

32.5 32.5

– –

65 65

1.6 1.6

C4-FR-11055-V21 C4-FL-11055-V21

40 40

11.6 11.6

– –

55 55

0.5 0.5

C5-FR-16060-V21 C5-FL-16060-V21

50 50

16.6 16.6

– –

60 60

0.9 0.9

C6-FR-23065-V21 C6-FL-23065-V21

63 63

23.1 23.1

– –

65 65

1.6 1.6

C4-SR-21065-V21 C4-SL-21065-V21

40 40

21.0 21.0

59.2 59.2

65 65

0.5 0.5

C5-SR-26075-V21 C5-SL-26075-V21

50 50

26.0 26.0

73.4 73.4

75 75

0.9 0.9

C6-SR-33085-V21 C6-SL-33085-V21

63 63

33.0 33.0

92.5 92.5

85 85

1.6 1.6

Dimensions in mm Application Shaft holder

Part. No.

ls1

GR2020K-V21 GL2020K-V21 GR2525M-V21 GL2525M-V21 GR3225P-V21 GL3225P-V21

20 20 25 25 32 32

20 20 25 25 25 25

125 125 150 150 170 170

20.0 20.0 25.0 25.0 25.0 25.0

– – – – – –

15 15 15 15 15 15

0.4 0.4 0.8 0.8 1.0 1.0

FR2020K-V21 FL2020K-V21 FR2525M-V21 FL2525M-V21 FR3225P-V21 FL3225P-V21

20 20 25 25 32 32

20 20 25 25 25 25

125 125 150 150 170 170

21.3 21.3 26.3 26.3 26.3 26.3

– – – – – –

35 35 35 35 35 35

0.4 0.4 0.8 0.8 1.0 1.0

SR2020K-V21 SL2020K-V21 SR2525M-V21 SL2525M-V21 SR3225P-V21 SL3225P-V21

20 20 25 25 32 32

20 20 25 25 25 25

125 125 150 150 170 170

– – – – – –

43.1 43.1 50.1 50.1 50.1 50.1

43 43 47 47 47 47

0.4 0.4 0.7 0.7 1.0 1.0

Spare Parts, included in delivery Toolholder/ Insert Dimension

..-V21

Clamp screw

C46017-T20P

Screw

Key

Torque value Nm

F85015-T20P

T20P-7L

6.0

MDT – Holders, external, modular Toolholder FR/L

Right-hand version

Inserts, please see pages 54-61

Dimensions in mm Application Seco Capto

Part. No.

D5m

C4-FR-04090-V21 C4-FL-04090-V21 C4-FR-07110-V21 C4-FL-07110-V21 C4-FR-11140-V21 C4-FL-11140-V21

25 25 32 32 40 40

40 40 40 40 40 40

4.0 4.0 7.5 7.5 11.5 11.5

90 90 110 110 140 140

70 70 90 90 120 120

0.6 0.6 0.7 0.7 1.3 1.3

C5-FR-04090-V21 C5-FL-04090-V21 C5-FR-07110-V21 C5-FL-07110-V21 C5-FR-11140-V21 C5-FL-11140-V21

25 25 32 32 40 40

50 50 50 50 50 50

4.0 4.0 7.5 7.5 11.5 11.5

90 90 110 110 140 140

70 70 90 90 120 120

0.7 0.7 0.9 0.9 1.5 1.5

C6-FR-04090-V21 C6-FL-04090-V21 C6-FR-07110-V21 C6-FL-07110-V21 C6-FR-11140-V21 C6-FL-11140-V21

25 25 32 32 40 40

63 63 63 63 63 63

4.0 4.0 7.5 7.5 11.5 11.5

90 90 110 110 140 140

68 68 88 88 118 118

0.9 0.9 1.3 1.3 1.8 1.8

Dimensions in mm Application Boring bar

Part. No.

Dmm

A25R-FR-V21 A25R-FL-V21 A32S-FR-V21 A32S-FL-V21 A40T-FR-V21 A40T-FL-V21

25 25 32 32 40 40

23 23 30 30 37 37

24.0 24.0 31.0 31.0 38.5 38.5

200 200 250 250 300 300

4.1 4.1 7.6 7.6 11.6 11.6

43 43 43 43 43 43

0.6 0.6 1.3 1.3 2.4 2.4

Spare Parts, included in delivery Toolholder/ Insert Dimension

Clamp screw

Screw

Key

Coolant Adapter*

Torque value Nm

6.0

C.-..-V21

C46017-T20P

F85015-T20P

T20P-7L

–

A25RA32SA40T-

C46017-T20P C46017-T20P C46017-T20P

F85015-T20P F85015-T20P F85015-T20P

T20P-7L T20P-7L T20P-7L

SEAL25 SEAL32 SEAL40

6.0 6.0 6.0 * To be ordered separately

MDT – Blades, modular, axial Toolholders for inserts LCGF, LCGN, LCMF and LCMR C.R/L

*Initial plunge eg 30/17 (30 mm/17 mm Ø) Right-hand version with left-hand blade shown

Holders, please see page 48-49 Inserts, please see page 54-61

Application

Initial plunge*

Part. No.

ar**

030/017 039/024 050/033 060/043 076/053 030/017 039/024 050/033 060/043 076/053 100/070 136/094 200/130 030/017 039/024 050/033 060/043 076/053 030/017 039/024 050/033 060/043 076/053 100/070 136/094 200/130

V21-CJR 1303L030017 V21-CJR 1303L039024 V21-CKR 1303L050033 V21-CKR 1303L060043 V21-CKR 1303L076053 V21-COR 1303L030017 V21-COR 1303L039024 V21-COR 1303L050033 V21-COR 1303L060043 V21-COR 1303L076053 V21-COR 1303L100070 V21-COR 1303L136094 V21-COR 1303L200130 V21-CJL 1303R030017 V21-CJL 1303R039024 V21-CKL 1303R050033 V21-CKL 1303R060043 V21-CKL 1303R076053 V21-COL 1303R030017 V21-COL 1303R039024 V21-COL 1303R050033 V21-COL 1303R060043 V21-COL 1303R076053 V21-COL 1303R100070 V21-COL 1303R136094 V21-COL 1303R200130

11.5 11.5 13.0 13.0 13.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0 11.5 11.5 13.0 13.0 13.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0

9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2

10.5 10.5 12.0 12.0 12.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 10.5 10.5 12.0 12.0 12.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0

0.04 0.05 0.06 0.06 0.07 0.04 0.05 0.06 0.07 0.07 0.08 0.09 0.08 0.04 0.05 0.06 0.06 0.07 0.04 0.05 0.06 0.07 0.07 0.08 0.09 0.08

LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303.. LC..1303..

030/017 034/021 040/026 050/032 060/042 075/052 100/067 030/017 034/021 040/026 050/032 060/042 075/052 100/067 135/092 200/127 030/017 034/021 040/026 050/032 060/042 075/052 100/067 030/017 034/021 040/026 050/032 060/042 075/052 100/067 135/092 200/127

V21-CHR 1304L030017 V21-CHR 1304L034021 V21-CIR 1304L040026 V21-CIR 1304L050032 V21-CIR 1304L060042 V21-CIR 1304L075052 V21-CIR 1304L100067 V21-CMR 1304L030017 V21-CMR 1304L034021 V21-CMR 1304L040026 V21-CMR 1304L050032 V21-CMR 1304L060042 V21-CMR 1304L075052 V21-CMR 1304L100067 V21-CMR 1304L135092 V21-CMR 1304L200127 V21-CHL 1304R030017 V21-CHL 1304R034021 V21-CIL 1304R040026 V21-CIL 1304R050032 V21-CIL 1304R060042 V21-CIL 1304R075052 V21-CIL 1304R100067 V21-CML 1304R030017 V21-CML 1304R034021 V21-CML 1304R040026 V21-CML 1304R050032 V21-CML 1304R060042 V21-CML 1304R075052 V21-CML 1304R100067 V21-CML 1304R135092 V21-CML 1304R200127

11.0 11.0 13.0 13.0 13.0 13.0 13.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 11.0 11.0 13.0 13.0 13.0 13.0 13.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0

9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2

10.0 10.0 12.0 12.0 12.0 12.0 12.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 10.0 10.0 12.0 12.0 12.0 12.0 12.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0

0.04 0.05 0.06 0.06 0.06 0.07 0.08 0.05 0.05 0.06 0.07 0.08 0.08 0.09 0.09 0.09 0.04 0.05 0.06 0.06 0.06 0.07 0.08 0.05 0.05 0.06 0.07 0.08 0.08 0.09 0.09 0.09

LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304.. LC..1304..

* Part No. relates to initial plunge ** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF/LCGF 1303/1304.. = 11 mm

MDT – Blades, modular, axial Toolholders for inserts LCGF, LCGN, LCMF and LCMR C.R/L

*Initial plunge eg 30/17 (30 mm/17 mm Ø) Right-hand version with right-hand blade shown

Holders, please see page 48-49 Inserts, please see page 54-61

Application

Initial plunge*

Part. No.

ar**

V21-CJR 1303R030017 V21-CJR 1303R039024 V21-CKR 1303R050033 V21-CKR 1303R060043 V21-CKR 1303R076053 V21-COR 1303R030017 V21-COR 1303R039024 V21-COR 1303R050033 V21-COR 1303R060043 V21-COR 1303R076053 V21-COR 1303R100070 V21-COR 1303R136094 V21-COR 1303R200130 V21-CJL 1303L030017 V21-CJL 1303L039024 V21-CKL 1303L050033 V21-CKL 1303L060043 V21-CKL 1303L076053 V21-COL 1303L030017 V21-COL 1303L039024 V21-COL 1303L050033 V21-COL 1303L060043 V21-COL 1303L076053 V21-COL 1303L100070 V21-COL 1303L136094 V21-COL 1303L200130

11.5 11.5 13.0 13.0 13.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0 11.5 11.5 13.0 13.0 13.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0

9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2

10.5 10.5 12.0 12.0 12.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 10.5 10.5 12.0 12.0 12.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0

0.04 0.05 0.06 0.06 0.07 0.03 0.03 0.04 0.05 0.05 0.05 0.06 0.06 0.04 0.05 0.06 0.06 0.07 0.03 0.03 0.04 0.05 0.05 0.05 0.06 0.06

V21-CHR 1304R030017 V21-CHR 1304R034021 V21-CIR 1304R040026 V21-CIR 1304R050032 V21-CIR 1304R060042 V21-CIR 1304R075052 V21-CIR 1304R100067 V21-CMR 1304R030017 V21-CMR 1304R034021 V21-CMR 1304R040026 V21-CMR 1304R050032 V21-CMR 1304R060042 V21-CMR 1304R075052 V21-CMR 1304R100067 V21-CMR 1304R135092 V21-CMR 1304R200127 V21-CHL 1304L030017 V21-CHL 1304L034021 V21-CIL 1304L040026 V21-CIL 1304L050032 V21-CIL 1304L060042 V21-CIL 1304L075052 V21-CIL 1304L100067 V21-CML 1304L030017 V21-CML 1304L034021 V21-CML 1304L040026 V21-CML 1304L050032 V21-CML 1304L060042 V21-CML 1304L075052 V21-CML 1304L100067 V21-CML 1304L135092 V21-CML 1304L200127

11.0 11.0 13.0 13.0 13.0 13.0 13.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 11.0 11.0 13.0 13.0 13.0 13.0 13.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0

9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2

10.0 10.0 12.0 12.0 12.0 12.0 12.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 10.0 10.0 12.0 12.0 12.0 12.0 12.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0

0.04 0.05 0.06 0.06 0.06 0.07 0.08 0.04 0.04 0.04 0.04 0.05 0.05 0.06 0.06 0.065 0.04 0.05 0.06 0.06 0.06 0.07 0.08 0.04 0.04 0.04 0.04 0.05 0.05 0.06 0.06 0.065

* Part No. relates to initial plunge ** Max. depth of cut for inserts LCMR and LCGN with single cutting edge, for inserts with double cutting edge: LCMF/LCGF 1303/1304.. = 11 mm

MDT – Inserts Code Key L

1. Shape

Rectangular

04 - 0400 7

* - FT 9

3. Tolerances

2. Front clearance angle

Tolerance ± mm

C = 7°

For inserts with ap mm

Tol. Class d

rε

0.025

0.040

0.050

0.080

5. Insert gauge length

4. Insert type R

Single ended with chip breaker

Double ended with chipbreaker

Single ended without chip breaker

Double ended without chipbreaker

7. Corner radius M0, 00 = round 04 = 0.4 mm 08 = 0.8 mm -A/G55 = thread profile -A/G60 = thread profile etc

ap G

8. Side clearance radius ap 0200 = 2.0 mm

10. Chip breaker geometry

FT = Chipbreaker for fine turning

FG = For circlips

MT = Chipbreaker for medium turning

DY = For dynamic O-rings

MG = Chipbreaker for medium grooving

ST = For stastic O-rings

MP = Chipbreaker for medium profiling

R = For radius

MC = Chipbreaker for medium cut-off

D76 = For thread andercuts

RP = Chipbreaker for fine and medium profiling A55/A60 = For threading G55/G60 GS = Chipbreaker for sharp grooving ISO GG = Chipbreaker for groand grooving MCR/L = Right or left hand version with a specified setting angle FTR/L

6. Insert gauge width

9. *Version (customized)

0300 = 3.0 mm 0400 = 4.0 mm 0500 = 5.0 mm etc

Mdt - inserts / Geometries FT - Fine Turning

FT 19 and 28 - Fine turning

MT - Medium Turning

• For fine turning • For deep grooving

• For fine turning • For parting-off • For deep grooving

• For medium turning • For shallow grooving

MG - Medium Grooving

MC - Medium cut-off

GG - Grooving ground

• • • •

• For parting-off thin walled pipes and small diameter workpieces • For deep grooving • Reduces vibration risk

• Ground chipgroove • For medium grooving, complement to FT for precision grooves

GS - Grooving sharp

MP - Medium Profiling

RP - For fine and medium profiling

• Sharp edge • For fine grooving in non-ferrous materials/ superalloys • Precision grooves

• • • • •

• For fine and medium profiling, turning and grooving • Sharp periphery ground edges • For superalloys, titanium alloys and nonferrous materials

FG - Circlip

D76 - Thread undercuts

For deep grooving For parting-off For medium turning Improves the chipbreaking

For medium profiling For medium turning For medium grooving Good accessibility Application area 240°

A55 / A60 / G55 /G60 / ISO Threading - Partial profile Note! The helix angle should not exceed l +2°

MDT – Inserts - double sided LCMF - FT / MT / MG Dimensions in mm Tolerance in mm: ap = ±0.05 l = ±0.08 s = ±0.05 s = ±0.08

Dimensions in mm: 13. 16. 19 and 28 30

Size

Inch version

1303 1304 1603 1604 1605 1606 1902 2802 3008-08 3008-10 1603 1605 1606

l = Distance cutting edge-rear support

  

rε

3.00 4.00 3.00 4.00 5.00 6.00 2.00 2.00 8.00 10.00 3.18 4.76 6.35

12.35 12.35 15.90 15.90 15.90 15.90 18.50 28.00 29.06 29.06 15.90 15.90 15.90

4.00 4.00 4.50 4.50 4.50 4.50 2.85 2.85 5.57 5.57 4.50 4.50 4.50

0.2-0.4 0.2-0.4 0.2-0.4 0.2-0.8 0.4-0.8 0.4-1.0 0.20 0.20 0.4-1.2 0.8-1.2 0.2 0.5 0.5

Grades Coated Inserts LCMF-FT mm version

LCMF-FT Inch version

LCMF-MT mm version

LCMF-MT Inch version

LCMF-MG mm version

Part. No.

κ°

CP200

CP500

CP600

LCMF 130302-0300-FT LCMF 130304-0300-FT LCMF 130402-0400-FT LCMF 130404-0400-FT

LCMF 160302-0300-FT LCMF 160304-0300-FT LCMF 160402-0400-FT LCMF 160404-0400-FT LCMF 160408-0400-FT LCMF 160504-0500-FT LCMF 160508-0500-FT LCMF 160604-0600-FT LCMF 160608-0600-FT LCMF 160610-0600-FT

LCMF 190202-0200-FT LCMF 190202-0200-FTR6 LCMF 190202-0200-FTL6

6 6



  

LCMF 280202-0200-FT LCMF 280202-0200-FTR6 LCMF 280202-0200-FTL6

6 6



  

LCMF 300804-0800-FT LCMF 300808-0800-FT LCMF 300808-1000-FT LCMF 300812-0800-FT LCMF 300812-1000-FT

    

LCMF 160302-0318-FT



LCMF 160505-0476-FT



LCMF 160605-0635-FT



LCMF 160302-0300-MT LCMF 160304-0300-MT

 

LCMF 160404-0400-MT LCMF 160408-0400-MT

LCMF 160504-0500-MT LCMF 160508-0500-MT

       

Uncoated TGK1500

TGP25



         

883



   

  



 



 



 



LCMF 160604-0600-MT LCMF 160608-0600-MT LCMF 160610-0600-MT

  

 

  

LCMF 160302-0318-MT



LCMF 160505-0476-MT



LCMF 160605-0635-MT



LCMF 160304-0300-MG



LCMF 160404-0400-MG



LCMF 160504-0500-MG



LCMF 160608-0600-MG



MDT – Inserts - double sided LCMF - MC Dimensions in mm Tolerance in mm: ap = ±0.05 l = ±0.08 s = ±0.05

l = Distance cutting edge-rear support

Size

rε

1303 1304 1603 1604 1605 1606

3.00 4.00 3.00 4.00 5.00 6.00

12.35 12.35 15.90 15.90 15.90 15.90

4.00 4.00 4.50 4.50 4.50 4.50

0.4 0.4 0.2-0.4 0.2-0.4 0.4 0.4-0.8

Grades Coated Inserts LCMF-MC

κ°

Part. No. LCMF 130304-0300-MC LCMF 130404-0400-MC

Note

CP500

 

LCMF 160302-0300-MC LCMF 160302-0300-MCR6 LCMF 160302-0300-MCL6 LCMF 160302-0300-MCR15 LCMF 160302-0300-MCL15 LCMF 160304-0300-MC

6 6 15 15 -

  

LCMF 160402-0400-MC LCMF 160402-0400-MCR6 LCMF 160402-0400-MCL6 LCMF 160402-0400-MCR15 LCMF 160402-0400-MCL15 LCMF 160404-0400-MC

6 6 15 15 -

CP600

       



     



* * 

* * * *

TGP25

 

LCMF 160504-0500-MC



LCMF 160604-0600-MC LCMF 160608-0600-MC

 



  * Toolholders have to be modified

LCGF - GG / GS Dimensions in mm Tolerance in mm: ap = ±0.025 l = ±0.025 s = ±0.05

l = Distance cutting edge-rear support

Size

rε

1303 1304 1603 1604 1605 1606 3008

3.000 4.000 3.000 4.000 5.000 6.000 8.000

12.350 12.350 16.600 16.600 17.100 17.400 29.000

4.00 4.00 4.25 4.25 4.15 4.20 5.55

0.2 0.2 0.2 0.2 0.2 0.4 0.4

Grades Coated Inserts LCGF-GG

LCGF-GS

Part. No. LCGF 130302-0300-GG LCGF 130402-0400-GG LCGF 160302-0300-GG LCGF 160402-0400-GG LCGF 160502-0500-GG LCGF 160604-0600-GG LCGF 300804-0800-GG LCGF 130302-0300-GS LCGF 130402-0400-GS LCGF 160302-0300-GS LCGF 160402-0400-GS LCGF 160502-0500-GS LCGF 160604-0600-GS LCGF 300804-0800-GS

CP500

Uncoated 883

             

MDT – Insert single-sided LCMR - FT / MT Dimensions in mm Tolerance in mm: ap = ±0.05 l = ±0.08 s = ±0.05 s = ±0.08

Dimensions in mm: 13 and 16 30

Size 1303 1304 1603 1604 1605 1606 3008-08 3008-10

l = Distance cutting edge-rear support

rε

3.00 4.00 3.00 4.00 5.00 6.00 8.00 10.00

12.35 12.35 15.90 15.90 15.90 15.90 29.06 29.212

4.00 4.00 4.50 4.50 4.50 4.50 5.57 5.57

0.2-0.4 0.2-0.4 0.4 0.2-0.8 0.4-0.8 0.8 0.8-1.2 0.8-1.2

Grades Coated Inserts LCMR-FT

LCMR-MT

Part. No.

CP200

CP500

LCMR 130302-0300-FT LCMR 130304-0300-FT

 

LCMR 130402-0400-FT LCMR 130404-0400-FT

 

Uncoated TGP25

883

LCMR 160304-0300-FT



LCMR 160402-0400-FT LCMR 160404-0400-FT



 



LCMR 160504-0500-FT



LCMR 160608-0600-FT



LCMR 300808-0800-FT LCMR 300808-1000-FT LCMR 300812-0800-FT LCMR 300812-1000-FT

   



LCMR 160304-0300-MT



LCMR 160404-0400-MT LCMR 160408-0400-MT



LCMR 160504-0500-MT LCMR 160508-0500-MT



LCMR 160608-0600-MT LCMR 160610-0600-MT



   

 

LCMR - MC Dimensions in mm Tolerance in mm: ap = ±0.05 l = ±0.08 s = ±0.05

l = Distance cutting edge-rear support

Grades Coated Inserts

κ°

CP600

LCMR 160302-0300-MC



LCMR 160404-0400-MC



LCMR 160504-0500-MC



LCMR 160604-0600-MC



Part. No.

LCMR-MC

Size

rε

1303 1304 1603 1604 1605 1606

3.00 4.00 3.00 4.00 5.00 6.00

12.35 12.35 15.90 15.90 15.90 15.90

4.00 4.00 4.50 4.50 4.50 4.50

0.4 0.4 0.2-0.4 0.2-0.4 0.4 0.4-0.8

MDT – Inserts, CIRCLIP LCGN - FG Radial Dimensions in mm Size 0115 0135 0165 0190 0215 0265 01-0300 02-0300 0320 0340 0400 0420 0440 0500 0520 0600 0635

rε

1.15 1.35 1.65 1.90 2.15 2.65 3.00 3.00 3.20 3.40 4.00 4.20 4.40 5.00 5.20 6.00 6.35

16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 17.10 17.10 17.60 17.60

4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50

– – 0.10 0.10 0.15 0.20 0.10 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20

1.15 1.35 1.65 1.90 2.15 – – – – – – – – – – – –

Grades Coated Inserts LCGN-FG

Part. No. LCGN 160300-0115-FG LCGN 160300-0135-FG LCGN 160301-0165-FG LCGN 160301-0190-FG LCGN 160301-0215-FG LCGN 160302-0265-FG LCGN 160302-0300-FG LCGN 160302-0320-FG LCGN 160302-0340-FG LCGN 160402-0400-FG LCGN 160402-0420-FG LCGN 160402-0440-FG LCGN 160502-0500-FG LCGN 160502-0520-FG LCGN 160602-0600-FG LCGN 160602-0635-FG

Standard

DIN 471 DIN 472 SMS 1581 SMS 1582

Lock ring

Note

CP500

1.00 1.20 1.50 1.75 2.00 2.50 – 3.00 – – 4.00 – – 5.00 – –

* * * * *

                * Toolholders have to be modified

LCGA - FG Dimensions in mm Size -0115 -0135 -0165 -0190 -0215 -0265 01-0300 02-0300 -0400

rε

1.15 1.35 1.65 1.90 2.15 2.65 3.00 3.00 4.00

12.35 12.35 12.35 12.35 12.35 12.35 12.35 12.35 12.35

4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00

– – 0.10 0.10 0.15 0.20 0.10 0.20 0.20

1.40 1.60 1.90 2.15 2.40 2.90 – – –

Grades Coated Inserts LCGA-FG

Part. No. LCGA 130300-0115-FG LCGA 130300-0135-FG LCGA 130301-0165-FG LCGA 130301-0190-FG LCGA 130301-0215-FG LCGA 130302-0265-FG LCGA 130301-0300-FG LCGA 130302-0300-FG LCGA 130402-0400-FG

Standard

DIN 471 DIN 472 SMS 1581 SMS 1582

Lock ring

Note

CP500

1.00 1.20 1.50 1.75 2.00 2.50 -

* * * * *

       

 * Toolholders have to be modified

MDT - Inserts LCMF - MP and LCMR - MP Tolerance in mm: ap = ±0,05 l = ±0,08

Size

rε

  

3.00 4.00 3.00 4.00 5.00 6.00 8.00 10.00 3.18 4.76 6.35

12.35 12.35 16.98 17.09 17.75 17.98 30.06 30.05 16.64 17.67 17.60

4.00 ±0.05 4.00 ±0.05 4.50 ±0.05 4.50 ±0.05 4.50 ±0.05 4.50 ±0.05 5.50 ±0.08 5.50 ±0.08 4.50 ±0.05 4.50 ±0.05 4.50 ±0.05

1.5 2.0 1.50 2.00 2.50 3.00 4.00 5.00 1.59 2.38 3.18

1303 1304 1603M0 1604M0 1605M0 1606M0 3008M0-08 3008M0-10 160300 160500 160600

l = Distance cutting edge-rear support

Dimensions in mm

Inch version

Grades Coated Inserts LCMF-MP

LCMR-MP

Part. No.

Uncoated

CP200

CP500

TGK1500

TGP25

   

      

       

mm - Version LCMF 1303M0-0300-MP LCMF 1304M0-0400-MP LCMF 1603M0-0300-MP LCMF 1604M0-0400-MP LCMF 1605M0-0500-MP LCMF 1606M0-0600-MP LCMF 3008M0-0800-MP LCMF 3008M0-1000-MP



       

Zoll - Version LCMF 160300-0318-MP LCMF 160500-0476-MP LCMF 160600-0635-MP

  

   

       

LCMR 1303M0-0300-MP LCMR 1304M0-0400-MP LCMR 1603M0-0300-MP LCMR 1604M0-0400-MP LCMR 1605M0-0500-MP LCMR 1606M0-0600-MP LCMR 3008M0-0800-MP LCMR 3008M0-1000-MP

883

890

    

  

     

    

LCGF-RP Tolerance in mm: ap = ±0.02 l = ±0.04

Size 1603M0 1604M0 1605M0 1606M0 3008M0-08 3008M0-10 160300 160500

l = Distance cutting edge-rear support

Grades

Inserts LCGF-RP

Coated

Uncoated

CP200

883

mm version LCGF 1603M0-0300-RP LCGF 1604M0-0400-RP LCGF 1605M0-0500-RP LCGF 1606M0-0600-RP LCGF 3008M0-0800-RP LCGF 3008M0-1000-RP

     

Inch version LCGF 160300-0318-RP LCGF 160500-0476-RP

 

Part. No.

Dimensions in mm

Inch version

rε

 

3.00 4.00 5.00 6.00 8.00 10.00 3.18 4.76

16.98 17.09 17.75 17.98 30.06 30.05 16.64 17.67

4.50 ±0.05 4.50 ±0.05 4.50 ±0.05 4.50 ±0.05 5.50 ±0.08 5.50 ±0.08 4.50 ±0.05 4.50 ±0.05

1.50 2.00 2.50 3.00 4.00 5.00 1.59 2.38

MDT – Inserts LCMF - MP Dimensions in mm Tolerance in mm: ap = ±0.05 l = ±0.08 s = ±0.05

Size 19 28

rε

2.00 2.00

18.50 28.00

2.85 2.85

1.0 1.0

l = Distance cutting edge-rear support

Grades Coated Inserts LCMF-MP

Part. No.

CP500

TGK1500

LCMF 1902M0-0200-MP



LCMF 2802M0-0200-MP



LCGN - Radius Dimensions in mm

Right-hand version shown

Size

rε

0100 0120 0150 0200 0300

16.60 16.60 16.60 16.60 17.60

4.50 4.50 4.50 4.50 4.50

1.00 1.20 1.50 2.00 3.00

2.4 2.4 – – –

Grades Coated Inserts LCGN-R

Part. No. LCGN 1603M0-0100R-R LCGN 1603M0-0100L-R LCGN 1603M0-0120R-R LCGN 1603M0-0120L-R LCGN 1603M0-0150-R LCGN 1604M0-0200-R LCGN 1606M0-0300-R

For radius mm

Note

CP500

1.0 1.0 1.2 1.2 1.5 2.0 3.0

* * * *

       * Toolholders have to be modified

LCGN - D76 Dimensions in mm

Right-hand version shown

Size

rε

0100 0150 0200

2.2 3.2 4.6

16.60 17.10 17.60

4.50 4.50 4.50

0.60 0.75 1.00

Grades Coated Inserts LCGN-D76

Part. No.

Max. Pitch mm

Note

CP500

LCGN 160306-0100R-D76 LCGN 160306-0100L-D76

1.0 1.0

* *

 

LCGN 160507-0150R-D76 LCGN 160507-0150L-D76

1.5 1.5

 

LCGN 160610-0200R-D76 LCGN 160610-0200L-D76

2.0 2.0

  * Toolholders have to be modified

MDT – Inserts, Threading LCGN – Partial profile 55° Dimensions in mm Size

Tolerance in mm: l = ±0.025 rε = ±0.025

1603-A 1603-G

rε

16.600 16.600

4.50 4.50

0.080 0.180

Grades Coated Inserts LCGN...-.55

Part. No. LCGN 1603-A55 LCGN 1603-G55

Pitch mm

TPI/“

CP500

0.50 - 1.50 1.75 - 3.00

48 - 16 14 - 8

 

LCGN – Partial profile 60° Dimensions in mm Size Tolerance in mm: l = ±0.025 rε = ±0.025

1603-A 1603-G

rε

16.600 16.600

4.50 4.50

0.080 0.180

Grades Coated Inserts LCGN...-.60

Part. No. LCGN 1603-A60 LCGN 1603-G60

Pitch mm

TPI/“

CP500

0.50 - 1.50 1.75 - 3.00

48 - 16 14 - 8

 

LCGN – ISO Metric Dimensions in mm Size

Tolerance in mm: l = ±0,025 rε = ±0,025

..-E0.5 ..-E0.8 ..-E1.0 ..-E1.25 ..-E1.5

0.75 1.20 1.50 1.88 2.40

16.600 16.600 16.600 16.600 16.600

4.50 4.50 4.50 4.50 4.50

1.90 3.00 3.75 4.20 –

Grades Coated Inserts LCGN...-.ISO

Part. No. LCGN 1603-E0.5ISO LCGN 1603-E0.8ISO LCGN 1603-E1.0ISO LCGN 1603-E1.25ISO LCGN 1603-E1.5ISO

Pitch mm

rε

Anm.

CP500

0.50 0.80 1.00 1.25 1.50

0.07 0.11 0.13 0.17 0.21

* * * *

    

* Toolholders have to be modified

MDT, Secomax CBN™, Inserts LCGN Dimensions in mm Tolerance in mm: ap = ±0.025 l = ±0.04 s = ±0.05 rε = ±0.025

Size

rε

1303 1304 1603 1604 1605 1606

3.000 4.000 3.000 4.000 5.000 6.000

12.33 12.33 15.90 15.90 15.90 15.90

4.00 4.00 4.50 4.50 4.50 4.50

0.400 0.400 0.400 0.400 0.400 0.400

Grades Inserts LCGN-LF

E = Honed E25 = Honed 25µm S = Chamfered and honed LF = Full Face

Part. No.

CBN010

CBN170

CBN200

LCGN 130304-0300S-LF



LCGN 130404-0400S-LF



LCGN 160304-0300E-LF LCGN 160304-0300E25-LF



LCGN 160304-0300S-LF



LCGN 160404-0400E-LF LCGN 160404-0400E25-LF



LCGN 160404-0400S-LF



LCGN 160504-0500E-LF



LCGN 160504-0500S-LF



LCGN 160604-0600E-LF



LCGN 160604-0600S-LF



 



LCGN Dimensions in mm Tolerance in mm: ap = ±0.025 l = ±0.04 s = ±0.05 rε = ±0.025

Size

rε

1303 1304 1603 1604 1605 1606

3.000 4.000 3.000 4.000 5.000 6.000

12.35 12.35 16.60 16.60 17.20 17.20

4.00 4.00 4.40 4.35 4.30 4.20

1.500 2.000 1.500 2.000 2.500 3.000

Grades Inserts LCGN...M0-LF

E = Honed E25 = Honed 25µm S = Chamfered and honed LF = Full Face

Part. No.

CBN010

LCGN 1303M0-0300S-LF



LCGN 1304M0-0400S-LF



LCGN 1603M0-0300E-LF LCGN 1603M0-0300E25-LF

 

LCGN 1603M0-0300S-LF



LCGN 1604M0-0400E25-LF



LCGN 1604M0-0400S-LF



LCGN 1605M0-0500E25-LF



LCGN 1605M0-0500S-LF



LCGN 1606M0-0600E25-LF



LCGN 1606M0-0600S-LF



CBN170

CBN200

     



MDT - Cutting data recommendations Cutting speed vc (m/min) CP200

CP500

CP600

TGP25

883/890

TGK1500

Seco Material Group

Steel

Insert width ap mm

Stainless steel Cast iron

4.5-6.0

8.0-10.0

2.0-4.0

4.5-6.0

8.0-10.0

2.0-6.0

3.0-4.0

4.5-6.0

8.0-10.0

3.0-10.0

3.0-8.0

Feed f (mm/rev)

280 271 250 241 –

259 241 219 204 195

– 204 189 174 158

240 210 190 160 –

210 190 170 140 120

– 160 150 125 100

220 200 175 150 –

340 325 300 290 –

315 290 265 250 235

– 250 230 210 195

– – – – –

290 280 265 250 240

0.1 0.2 0.3 0.4 0.5

241 210 195 171 –

210 195 174 155 140

– 174 155 146 125

210 190 170 145 –

190 170 150 130 120

– 150 130 120 100

200 175 155 130 –

290 255 235 105 –

255 235 210 190 170

– 210 190 175 150

– – – – –

250 225 200 180 170

0.1 0.2 0.3 0.4 0.5

229 210 189 171 –

204 195 174 155 146

– 174 158 146 131

195 175 150 130 –

170 155 135 120 110

– 140 125 110 100

180 165 145 125 –

280 255 230 205 –

250 235 210 190 175

– 210 195 175 160

– – – – –

240 225 200 180 170

0.1 0.2 0.3 0.4 0.5

226 204 189 174 –

204 195 174 158 149

– 180 158 149 140

160 145 125 110 –

145 120 110 100 95

– 105 100 90 80

150 130 120 105 –

270 250 230 205 –

250 235 210 195 180

– 220 195 180 170

– – – – –

230 210 190 170 160

0.1 0.2 0.3 0.4 0.5

201 189 171 158 –

189 171 155 146 131

– 149 146 125 119

140 125 105 100 –

125 105 95 85 75

– 90 80 70 60

125 110 100 90 –

240 230 205 195 –

230 205 190 175 160

– 180 175 150 145

– – – – –

210 200 180 170 160

0.1 0.2 0.3 0.4 0.5

174 155 146 131 –

155 146 131 119 110

– 131 119 104 101

130 110 100 90 –

110 100 90 80 70

– 90 75 65 55

125 105 95 80 –

210 190 175 160 –

190 175 160 145 135

– 160 145 130 120

– – – – –

190 170 155 145 135

0.1 0.2 0.3 0.4 0.5

131 119 110 104 –

119 110 104 101 94

– 104 101 94 91

80 75 70 65 –

70 65 55 50 –

– 50 45 35 30

75 70 65 55 –

145 135 125 120 –

135 125 120 110 105

– 120 110 105 100

– – – – –

145 130 125 120 110

0.1 0.2 0.3 0.4 0.5

201 186 171 155 –

186 171 149 131 119

– 149 131 110 94

180 160 145 130 –

160 145 125 110 95

– 125 110 96 80

170 150 130 120 –

220 205 190 175 –

205 190 165 145 135

– 165 145 125 105

– – – – –

0.1 0.2 0.3 0.4 0.5

174 158 146 131 –

158 146 131 116 101

– 125 119 101 91

155 145 125 115 –

145 125 115 100 85

– 110 100 85 70

145 130 120 110 –

195 180 160 145 –

180 160 145 130 110

– 140 135 110 100

– – – – –

0.1 0.2 0.3 0.4 0.5

171 149 140 125 –

149 140 119 110 94

– 125 116 91 79

150 130 120 110 –

130 120 100 90 85

– 110 90 75 65

140 125 115 100 –

190 165 155 140 –

165 155 135 125 105

– 140 130 100 90

– – – – –

0.1 0.2 0.3 0.4 0.5

– – – – –

95 85 80 70 –

– 85 80 70 65

90 80 70 65 –

– – – – –

50 40 35 – –

– – – – –

0.1 0.2 0.3 0.4 0.5

180 171 155 146 –

171 155 134 125 119

– 146 119 104 101

135 125 105 95 –

125 110 95 80 75

– 100 80 70 65

– – – – –

245 230 210 200 –

230 210 185 170 165

– 200 165 145 135

100 85 80 75 –

200 190 175 165 150

0.1 0.2 0.3 0.4 0.5

149 140 125 110 –

140 125 119 104 101

– 110 104 101 94

110 100 85 75 65

100 90 80 70 65

– 75 70 60 60

– – – – –

205 190 170 150 –

190 170 165 145 135

– 150 145 135 130

100 85 75 65 –

170 155 145 130 120

0.1 0.2 0.3 0.4 0.5

131 119 104 94 –

119 104 101 91 76

– 94 91 85 70

105 95 80 70 –

95 80 75 65 55

– 70 65 55 50

– – – – –

180 165 145 130 –

165 145 135 125 105

– 130 125 115 95

90 75 65 50 –

160 150 130 120 110

0.1 0.2 0.3 0.4 0.5

131 119 104 94 –

119 104 101 91 76

– 94 91 85 70

105 95 80 70 –

95 80 75 65 55

– 70 65 55 50

– – – – –

180 165 145 130 –

165 145 135 125 105

– 130 125 115 95

75 65 50 40 –

150 140 125 115 100

0.1 0.2 0.3 0.4 0.5

3.0-4.0

MDT - Cutting data recommendations Cutting speed vc (m/min) CP200

CP500

CP600

TGP25

883/890

TGK1500

Seco Material Group

Superalloys

Non-iron

Insert width ap mm

3.0-4.0

4.5-6.0

8.0-10.0

2.0-4.0

4.5-6.0

8.0-10.0

2.0-6.0

3.0-4.0

4.5-6.0

8.0-10.0

3.0-10.0

3.0-8.0

Feed f (mm/rev)

– – – – –

440 360 310 280 260

400 325 280 250 235

– 300 250 225 210

400 330 280 250 230

– – – – –

430 350 300 270 –

– – – – –

0.1 0.2 0.3 0.4 0.5

– – – – –

350 290 245 220 200

315 260 220 200 180

285 235 200 180 165

320 260 220 200 180

– – – – –

340 280 235 210 –

– – – – –

0.1 0.2 0.3 0.4 0.5

– – – – –

251 206 177 160 148

228 186 160 143 134

– 171 143 128 120

228 188 160 143 131

– – – – –

246 200 171 154 –

– – – – –

0.1 0.2 0.3 0.4 0.5

– –

48 34

43 31

39 28

43 31

– –

37 31

– –

0.05 0.10

49 49

40 40

34 34

39 28

35 25

32 23

35 25

– –

30 25

– –

0.05 0.10

30 30

24 24

21 21

33 28

30 25

27 23

30 25

– –

20 15

– –

0.05 0.10

55 55

46 46

34 34

39 33

35 30

32 27

35 30

– –

20 25

– –

0.05 0.10

Cutting speed vc (m/min) Classify the workpiece materials into a SMG to get a cutting speed recommendation based on: • Workpiece material • Insert width and grade • Feed rate For workpiece classification please see Seco Machining Navigator, catalogue Turning.

Grooving with Secomax CBN™ Grades and cutting data recommendations CBN is produced by sintering crystals of cubic boron nitride under extremely high pressure and high temperature. The result is a wear resistant composite with properties very close to diamond. The hot hardness, oxidation resistance and fracture toughness give CBN excellent edge retention and long tool life in the machining of hard ferrous materials, some cast irons and some superalloys. These physical properties give CBN superb performance when machining dry. • • • •

Full Face inserts are available for MDT in grades CBN010, CBN170 and CBN200 CBN010 is suitable for hard iron and superalloys CBN170 for machining of superalloys CBN200 for application in hard iron and cast material

For further information regarding machining with CBN please see Seco Machining Navigator, catalogue Turning 2012, pages 57-71.

150.10 Parting-off Code Key Blade

Holder

150.10 - 20 1

20 - 20 3

1. System designation 2. Shaft height (mm) 3. Shaft width (mm) 4. Height of blade (mm)

150.10 - 20 - 4 1

Inserts

Blade Jetstream Tooling® Duo

150.10A - 20 - 4

1. System designation 2. Height of blade (mm) 3. Insert width (mm)

JET

150.10 - 20 1

1. System designation 2. Height of blade (mm) 3. Insert width (mm) 4. Jetstream connection (R =r ight, L = left) 5. Coolant system (JET = Jetstream Tooling® Duo)

N - 14 3

1. System designation 2. Insert width (mm) 3. Version (N = neutral, R = right, L = left) 4. Insert geometry

Geometries – First choice -12 First choice for steel at low feedrates

-14 First choice for stainless steel and soft, ductile steel at moderate to high feed rates

-16 First choice for steel and castiron at moderate to high feedrates and/or in difficult conditions

• 24° rake angle • Excellent chipbreaking

• 15° positive rake angle • Sharp cutting edges

• 20° positive rake angle • Strong cutting edge

Feed - recommendations Feed, f (mm/rev) Insert type N

Insert type R/L

Recommendation Insert width ap (mm) 1,4

2,0

2,25

2,5

3,1

4,1

5,1

6,3

Edge geometry

Basic recommendation

min

-12 -14 -16

– 0.05 0.06

-12 -14 -16

Recommendation max

Basic recommendation

min

max

– 0.04 0.04

– 0.12 0.12

– – –

– 0.07 0.08

– 0.05 0.05

– 0.14 0.15

– – –

-12 -14 -16

– 0.09 0.10

– 0.05 0.05

– 0.16 0.20

– – –

-12 -14 -16

0.09 0.10 0.13

0.05 0.07 0.10

0.18 0.20 0.24

0.06 0.07 0.09

0.04 0.05 0.07

0.13 0.14 0.17

-12 -14 -16

0.10 0.13 0.18

0.05 0.08 0.12

0.20 0.24 0.28

0.07 0.09 0.13

0.04 0.06 0.08

0.14 0.17 0.20

-12 -14 -16

0.13 0.15 0.20

0.07 0.09 0.14

0.22 0.26 0.32

0.09 0.11 0.14

0.05 0.06 0.10

0.15 0.18 0.22

-12 -14 -16

0.15 0.18 0.23

0.08 0.10 0.16

0.26 0.34 0.40

0.11 0.13 0.16

0.06 0.07 0.11

0.18 0.24 0.28

-12 -14 -16

0.17 0.20 0.25

0.10 0.14 0.18

0.30 0.38 0.42

0.12 0.14 0.18

0.07 0.10 0.13

0.21 0.27 0.29

150.10 Parting-off, Toolholders Holders Seco-Captoâ&#x201E;˘ 150.10-..20/25 for blades C.-150.10-

Neutral version Inserts, please see page 69 Dimensions in mm Application

Part. No.

D5m

b21

b22

h21

h22

l21

l22

l23

C5-150.10 -40058-20

100

30.0

25.2

1.3

C6-150.10 -60060-25

141

120

37.0

32.0

2.3

C8-150.10 -60068-25

145

120

40.5

40.0

3.5

C.-R/L150.10-

Right-hand version Inserts, please see page 69

Dimensions in mm Application

Part. No.

D5m

b21

b22

h21

h22

l21

l22

l23

C5-R150.10 -31095-20 C5-L150.10 -31095-20

87 87

50 50

25.5 25.5

31.0 31.0

26.0 26.0

30.0 30.0

26.0 26.0

95 95

20 20

1.5 1.5

C6-R150.10 -37147-25 C6-L150.10 -37147-25

106 106

63 63

32.0 32.0

37.0 37.0

32.0 32.0

38.0 38.0

32.0 32.0

147 147

22 22

3.3 3.3

C8-R150.10 -46155-25 C8-L150.10 -46155-25

122 122

80 80

40.0 40.0

45.5 45.5

40.5 40.5

155 155

30 30

5.2 5.2

Spare Parts, included in delivery Anvil

Screw

Plug

150.10-647 150.10-648

MC6S8X20 MC6S8x25

PL1308-H06 PL1308-H06

Toolholder/ Insert Dimension -20 -25

150.10 Parting-off, Toolholders Holders R/L 150.10-..15 and HSS-blades for parting-off Holder R/L 150.10-...-15

HSS-blade 150.10A-15

Right-hand version Inserts, please see page 69 Dimensions in mm Application

Part. No.

Dm max

R150.10 R150.10 R150.10 R150.10 R150.10 L150.10 L150.10 L150.10 L150.10 L150.10

-1010-15 -1212-15 -1616-15 -2020-15 -2525-15 -1010-15 -1212-15 -1616-15 -2020-15 -2525-15

10 12 16 20 25 10 12 16 20 25

136 136 81 106 106 136 136 81 106 106

– – – – – – – – – –

0.2 0.2 0.2 0.4 0.6 0.2 0.2 0.2 0.4 0.6

150.10A 150.10A 150.10A 150.10A

-15-1.4 -15-2 -15-2.5 -15-3

– – – –

32 32 32 32

1.20 1.80 2.00 2.40

38 38 38 38

– – – –

150.10-1.4.. 150.10-2.. 150.10-2.5.. 150.10-3..

– –

32 32

3.40 3.40

38 38

– –

150.10-4.. 150.10-4..

R150.10A-15-4 L150.10A-15-4

Spare Parts, included in delivery Screw

Key

MC6S 5x18

4SMS795

Key for insert *

Toolholder/ Insert Dimension R/L150.10-....-15

150.10A-150

150.10-140 * To be ordered separately

– – – – – – – – – –

150.10 Parting-off, Toolholders Holders 150.10-..20/25 and HSS-blades 150.10A-20/25 for parting-off Holder 150.10-...-20/25

Inserts, please see page 69

HSS-Blades

Dimensions in mm h

Dm max

150.10 -1616-20 150.10 -2020-20

16 20

– –

12.0 8.0

42.1 42.1

100 100

– –

35.75 39.75

– –

0.7 0.8

– –

150.10 -2520-25 150.10 -2525-25 150.10 -3232-25

25 25 32

20 25 32

– – –

12.5 12.5 5.5

54.0 54.0 54.0

125 125 125

– – –

39.75 44.75 51.75

– – –

1.2 1.4 1.7

– – –

150.10A -20-1.4 150.10A -20-2 150.10A -20-2.5 150.10A -20-3 150.10A -20-4 150.10A -20-5 150.10A -20-6

– – – – – – –

21.4 21.4 21.4 21.4 21.4 21.4 21.4

– – – – – – –

120 120 120 120 120 120 120

1.20 1.80 2.00 2.40 3.40 4.40 5.65

– – – – – – –

35 35 35 90 100 120 120

25 25 25 – – – –

0.1 0.1 0.1 0.1 0.1 0.1 0.1

150.10-1.4.. 150.10-2.. 150.10-2.5.. 150.10-3.. 150.10-4.. 150.10-5.. 150.10-6..

150.10A -25-1.4 150.10A -25-2 150.10A -25-2.5 150.10A -25-3 150.10A -25-4 150.10A -25-5 150.10A -25-6 L150.10A-25-1.4

– – – – – – – –

25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

– – – – – – – –

150 150 150 150 150 150 150 150

1.20 1.80 2.00 2.40 3.40 4.40 5.65 1.20

– – – – – – – –

35 35 35 120 140 160 160 35

25 25 25 – – – – 25

0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.1

150.10-1.4.. 150.10-2.. 150.10-2.5.. 150.10-3.. 150.10-4.. 150.10-5.. 150.10-6.. 150.10-1.4

Part. No.

Spare Parts, included in delivery Wedge

Wedge Screw

150.10-646 150.10-646

150.10-650 150.10-650

Screw/Key

Key for insert *

Toolholder/ Insert Dimension -20 -25

MF6S 6x25 MF6S 6x25

150.10-159 150.10-159

150.10A-150 150.10A-150 * To be ordered separately

150.10 Parting-off – Toolholders, Jetstream Tooling® duo HSS-blades 150.10A-20/25 for parting-off

Inserts, please see page 69 Dimensions in mm Application

Part. No.

150.10A-20 -2RJET 150.10A-20 -2LJET 150.10A-20 -2.5RJET 150.10A-20 -2.5LJET 150.10A-20 -3RJET 150.10A-20 -3LJET 150.10A-20 -4RJET 150.10A-20 -4LJET

2.0 2.0 2.5 2.5 3.0 3.0 4.0 4.0

21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4

120 120 120 120 120 120 120 120

25 25 25 25 – – – –

1.80 1.80 2.00 2.00 2.40 2.40 3.40 3.40

35.0 35.0 35.0 35.0 83.5 83.5 83.5 83.5

0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1

150.10-2.. 150.10-2.. 150.10-2.5.. 150.10-2.5.. 150.10-3.. 150.10-3.. 150.10-4.. 150.10-4..

150.10A-25 -3RJET 150.10A-25 -3LJET 150.10A-25 -4RJET 150.10A-25 -4LJET 150.10A-25 -5RJET 150.10A-25 -5LJET 150.10A-25 -6RJET 150.10A-25 -6LJET

3.0 3.0 4.0 4.0 5.0 5.0 6.0 6.0

25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

150 150 150 150 150 150 150 150

– – – – – – – –

2.40 2.40 3.40 3.40 4.40 4.40 5.65 5.65

113.5 113.5 113.5 113.5 113.5 113.5 113.5 113.5

0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2

150.10-3.. 150.10-3.. 150.10-4.. 150.10-4.. 150.10-5.. 150.10-5.. 150.10-6.. 150.10-6..

Spare Parts, included in delivery Key*

Kit*

Coolant sealing**

Clamp screw**

Copper washer**

150.10A-150 150.10A-150 150.10A-150 150.10A-150

150.10A-3-JET-KIT 150.10A-4-JET-KIT 150.10A-5-JET-KIT 150.10A-6-JET-KIT

JET-CFP0611 JET-CFP0613 JET-CFP0614 JET-CFP0615

JET-CLS0608 JET-CLS0608 JET-CLS0608 JET-CLS0608

JET-WM10 JET-WM10 JET-WM10 JET-WM10

JET-CS1115 – – –

Toolholders/ Inserts Dimensions -2, -2.5, -3 -4 -5 -6

* To be ordered separately ** Part of kit

coolant connection Use hose kits as shown in Machining Navigator 2012 Turning page 325 to connect blade to lathe.

150.10 Parting-off, insert programme Dimensions in mm Size

rε

1.4 2.0 2.25 2.5 3 4 5 6

1.40 ±0.05 2.00 ±0.05 2.25 ±0.05 2.50 ±0.05 3.10 ±0.08 4.10 ±0.08 5.10 ±0.08 6.35 ±0.08

9 9 9 9 9 9 9 9

0.15 0.15 0.15 0.17 0.19 0.23 0.26 0.30

Toolholders, please see page 65-68

Grades Coated Inserts 150.10-12

150.10-14

150.10-16

Part. No.

Uncoated

T25M

T350M

CP500

CP600

TGP35

TGP45

150.10 -2.5N-12 150.10 -2.5R6-12 150.10 -2.5L6-12

  



  



150.10 -3N-12 150.10 -3R6-12 150.10 -3L6-12

  



  



150.10 -4N-12 150.10 -4R6-12 150.10 -4L6-12

  



150.10 -5N-12



150.10 -6N-12



150.10 -1.4N-14



150.10 -2.0N-14



150.10 -2.25N-14



 



150.10 -2.5N-14 150.10 -2.5R6-14 150.10 -2.5L6-14

  



  

150.10 -3N-14 150.10 -3R6-14 150.10 -3L6-14

  

 

  



  



150.10 -4N-14 150.10 -4R6-14 150.10 -4L6-14

  



150.10 -5N-14



150.10 -6N-14



  

    

   

150.10 -1.4N-16 150.10 -2.0N-16 150.10 -2.25N-16 150.10 -2.5N-16 150.10 -2.5R6-16 150.10 -2.5L6-16

   

150.10 -3N-16 150.10 -3R6-16 150.10 -3L6-16

  



  

 

  



150.10 -4N-16 150.10 -4R6-16 150.10 -4L6-16

  



 

150.10 -5N-16 150.10 -5R6-16 150.10 -5L6-16

  



150.10 -6N-16



  

150.10 Parting-off Cutting data Use the tables beginning on page 629 of the Seco Machining Navigator, catalogue Turning, to classify the workpiece material.

Start values for the feed please find on page 64 in this brochure.

Cutting speed vc (m/min) TGP35

Seco Material Group

TGP45

T25M

T350M

CP500

CP600

Insert width ap mm

Steel

Feed 2.0-2.5 3.0-4.0 5.0-6.0 1.4-2.5 3.0-4.0 5.0-6.0 2.0-2.5 3.0-4.0 5.0-6.0 2.0-2.5 3.0-4.0 1.4-2.5 3.0-4.0 5.0-6.0 1.4-2.5 3.0-4.0 5.0-6.0 2.0-2.5 3.0-4.0 5.0-6.0 f (mm/rev)

Stainless steel

– 235 225 210 200 –

– 215 200 185 175 165

245 220 200 – – –

– 230 210 185 165 –

– 210 185 170 145 135

210 190 170 – – –

– 200 180 160 140 –

– 180 160 145 125 115

195 180 160 – – –

– 185 170 150 130 –

202 179 168 – – –

– 191 168 152 128 –

– 175 147 130 107 90

185 170 155 – – –

– 175 160 140 120 –

– 160 140 120 100 90

– – – – – –

0.05 0.10 0.20 0.30 0.40 0.50

210 190 175 – – –

– 200 180 165 140 –

– 180 165 150 130 115

220 205 180 – – –

– 210 185 170 145 –

– 185 170 150 135 115

190 175 155 – – –

– 180 160 145 125 –

– 160 145 130 115 100

180 160 145 – – –

– 170 150 135 115 –

179 163 147 – – –

– 168 152 13 117 –

– 147 136 115 100 80

170 155 135 – – –

– 160 140 125 105 –

– 140 125 105 90 80

– – – – – –

0.05 0.10 0.20 0.30 0.40 0.50

200 185 170 – –

– 195 180 160 140

– 175 165 150 130

200 180 165 – –

– 190 175 150 135

– 160 140 125 115

170 155 140 – –

– 165 150 130 115

– 135 120 105 –

160 145 130 – –

– 155 140 120 105

158 152 133 – –

– 157 138 119 104

– 141 122 103 88

150 140 125 – –

– 145 130 115 100

– 130 115 100 85

– – – – –

0.05 0.10 0.20 0.30 0.40

195 180 170 – –

– 190 175 160 145

– 175 165 145 135

170 150 140 – –

– 165 145 130 115

– 145 135 115 105

145 130 120 – –

– 140 125 110 100

– 125 115 100 90

135 120 110 – –

– 130 115 100 90

131 123 112 – –

– 128 117 99 89

– 112 106 89 79

125 115 100 – –

– 120 105 95 85

– 105 95 85 75

– – – – –

0.05 0.10 0.20 0.30 0.40

175 165 155 – –

– 170 160 140 –

– 160 140 130 120

145 135 125 – –

– 140 130 110 –

– 130 110 100 90

125 115 105 – –

– 120 110 95 –

– 110 95 85 75

115 105 95 – –

– 110 100 85 75

110 106 97 – –

– 112 102 84 78

– 101 91 74 67

105 95 85 – –

– 100 90 80 70

– 90 80 70 60

– – – – –

0.05 0.10 0.20 0.30 0.40

155 135 125 – –

– 145 130 120 –

– 130 120 110 100

140 125 110 – –

– 135 115 105 –

– 115 105 95 85

120 105 95 – –

– 115 100 90 –

– 100 90 80 70

110 100 85 – –

– 105 90 80 70

110 99 84 – –

– 88 79 68 –

– 88 79 68 62

105 95 80 – –

– 100 85 75 65

– 85 75 65 55

– – – – –

0.05 0.10 0.20 0.30 0.40

110 105 100 – –

– 110 100 95 –

– 100 95 90 –

90 85 75 – –

– 90 75 70 –

– 75 70 65 –

75 70 65 – –

– 75 65 60 –

– 65 60 55 –

70 60 55 – –

– 65 60 55 50

58 53 – – –

– 64 59 54 53

– 59 54 48 47

65 55 50 – –

– 60 55 50 45

– 55 50 45 40

– – – – –

0.05 0.10 0.20 0.30 0.40

185 170 150 – –

– 180 165 145 –

– 165 150 130 115

185 165 150 – –

– 180 160 145 –

– 160 145 130 110

165 150 135 – –

– 160 145 130 –

– 145 130 115 100

155 140 125 – –

– 150 130 120 105

158 143 128 – –

– 148 133 123 108

– 132 117 112 98

150 135 120 – –

– 140 125 110 100

– 125 110 100 90

– – – – –

0.05 0.10 0.20 0.30 0.40

165 145 130 – –

– 150 140 125 –

– 140 125 115 100

165 150 135 – –

– 155 145 130 –

– 145 130 120 100

150 135 120 – –

– 140 130 115 –

– 130 115 105 90

135 125 110 – –

– 130 120 105 95

131 123 117 – –

– 128 123 104 94

– 118 112 94 84

125 115 105 – –

– 120 110 100 90

– 110 100 90 80

– – – – –

0.05 0.10 0.20 0.30 0.40

160 150 140 – –

– 160 145 – –

– 145 130 115 –

155 145 130 – –

– 145 135 – –

– 135 120 105 –

140 130 115 – –

– 130 120 – –

– 120 105 95 –

130 120 105 – –

– 120 110 100 90

126 118 104 – –

– 123 109 99 94

– 113 99 89 83

120 110 100 – –

– 115 105 95 85

– 105 95 85 75

– – – – –

0.05 0.10 0.20 0.30 0.40

125 110 105 – –

– 120 105 – –

– 105 95 85 –

135 120 105 – –

– 130 120 – –

– 120 105 90 –

120 105 95 – –

– 115 105 – –

– 105 95 80 –

95 85 75 – –

– 95 85 70 60

79 74 64 – –

– 79 69 69 59

– 69 64 63 54

75 70 60 – –

– 75 65 60 55

– 65 60 55 50

– – – – –

0.05 0.10 0.20 0.30 0.40

240 225 215 – – –

Cutting speed vc (m/min) TGP35

Seco Material Group

TGP45

T25M

T350M

CP500

CP600

Insert width ap mm

Superalloys

Non-iron

Cast iron

Feed 2.0-2.5 3.0-4.0 5.0-6.0 1.4-2.5 3.0-4.0 5.0-6.0 2.0-2.5 3.0-4.0 5.0-6.0 2.0-2.5 3.0-4.0 1.4-2.5 3.0-4.0 5.0-6.0 1.4-2.5 3.0-4.0 5.0-6.0 2.0-2.5 3.0-4.0 5.0-6.0 f (mm/rev)

160 145 135 – –

– 150 140 130 –

– 140 130 115 105

160 145 135 – –

– 150 140 120 –

– 140 125 110 95

125 115 105 – –

– 120 110 95 –

– 110 100 85 75

115 105 95 – –

– 110 100 85 75

122 113 95 – –

– 122 113 95 86

– 113 99 86 72

– – – – –

125 110 100 –

130 120 105 95 –

115 105 95 85 –

0.05 0.10 0.20 0.30 0.40

130 120 110 – –

– 125 115 105 –

– 115 105 100 90

135 120 110 – –

– 125 115 100 –

– 115 100 95 85

105 95 85 – –

– 100 90 80 –

– 90 80 75 65

95 85 75 – –

– 90 80 75 65

99 90 77 – –

– 99 90 77 68

– 90 81 72 63

– – – – –

100 90 80 – –

105 95 85 – –

95 85 75 70 –

0.05 0.10 0.20 0.30 0.40

110 100 – – –

– 110 100 – –

– 100 90 – –

130 110 100 – –

– 115 105 95 –

– 105 95 85 –

– – – – –

95 86 72 – –

– 95 86 72 63

– 86 72 68 59

– – – – –

85 75 65 – –

90 80 75 – –

80 75 65 60 –

0.05 0.10 0.20 0.30 0.40

100 90 – – –

– 100 90 – –

– 90 80 – –

120 100 95 – –

– 105 95 90 –

– 95 85 80 –

– – – – –

95 86 72 – –

– 95 86 72 63

– 86 72 68 59

– – – – –

70 65 55 – –

75 65 60 – –

65 60 55 50 –

0.05 0.10 0.20 0.30 0.40

– – – – –

468 393 332 280 254

517 436 365 314 283

446 376 316 269 243

425 360 300 250 225

470 400 330 280 250

405 345 285 240 215

480 400 325 280 255

520 430 350 300 270

460 380 310 265 240

0.05 0.10 0.20 0.30 0.40

– – – – –

355 323 262 220 194

394 357 290 242 217

339 307 251 209 189

325 290 235 200 175

360 320 260 220 195

310 275 225 190 170

370 320 265 225 200

400 340 280 235 210

355 305 250 215 190

0.05 0.10 0.20 0.30 0.40

– – – – –

316 288 233 196 173

350 317 257 215 193

301 273 223 186 168

289 258 209 178 156

320 284 231 196 173

276 244 200 169 151

329 284 236 200 178

356 302 249 209 187

316 271 222 191 169

0.05 0.10

– –

55 41

48 34

50 37

43 31

– –

0.05 0.10

– –

40 35

45 40

40 35

45 35

44 33

39 28

40 30

35 25

30 25

35 30

30 25

0.05 0.10

– –

30 25

35 30

30 25

40 30

40 35

39 28

29 28

33 28

35 25

30 25

20 15

25 20

20 15

0.05 0.10

– –

45 40

50 45

45 40

40 35

45 40

39 33

44 39

39 33

35 30

40 35

35 30

20 25

25 30

20 25

0.05 0.10

Set-up and machining recommendations • The mounting has to be stable. • The tool should be securely clamped and the overhang should be as small as possible. • The centre height should never deviate by more than ±0,1 mm from the workpiece centre. Parting-off • An insert with a neutral edge (N) normally results in a longer useful life of the insert. • The useful life of the insert can be increased by reducing the feed rate or stopping the feed entirely before breakthrough.

SECO TOOLS AB 737 82 Fagersta Sweden WWW.secotools.com