easy
Level of difficulty
medium
hard
You can find more creative tips at www.staedtler.com
Steam Punk Surrealistic recycling jewellery – the latest in trendy fashion styles. With FIMO, FIMO liquid, push moulds and parts of old watches or mechanical disc drives, you can create true originals in a retro-futuristic look. It’s certainly worth taking a look around flea markets or your grandad‘s old workshop. Image transfer – the ideal technique for transforming motifs from your favourite pictures into unique accessories
Shopping / material list
Steam Punk You will need these STAEDTLER articles:
You can find our products in well-stocked sales outlets. Should you have any queries, please call our hotline: +49 (0)911 9365-888. Have fun crafting!
Product
Colour
Art. No.
FIMO liquid
Transparent
8050-00 BK
1
FIMO soft
White
8020-0
1
FIMO effect
Gold
8020-11
1
Push mould ‘Ornaments’
--
8725 08
1
FIMO accessoires, round frame
--
8625 21
2
Metallic powder
Gold
8709 BK
1
Gloss varnish
--
8703 01 BK
1
Bead-piercing needles
--
8712 20
1
Acrylic roller
--
8700 05
1
Modelling tools
--
8711
1
Blades
--
8700 04
1
Oven thermometer
--
8700 02
1
For crafting: For decorating:
Quantity
3
Scissors, smooth surface, combi pliers, round nose pliers Rope chain, silver (with 5 strands, please test first to see if they fit through the holes of the ring frame) • Gold wire or eyelet pins, approx. 4 cm long • 2 earring hooks, gold finish, 20 mm long each • Silver tubes, approx. 15 mm long • Silver beads approx. Ø 3 mm
1
easy
Level of difficulty
medium
hard
You can find more creative tips at www.staedtler.com
Instructions for earrings and pendants 1
For the decorative ornaments, brush a little gold metallic powder into the FIMO accessoires push mould.
2
Then press a little gold FIMO effect into this gold-dusted FIMO accessoires push mould. Use the blade or kitchen knife to cut off any excess FIMO. This leaves the motif with an even, smooth back.
3
Cut the eyelet pins to size and press horizontally into the mould. Then demould the ornament – i.e. push it carefully out of the push mould from the back.
Cleaning: After use, wipe the mould clean using a damp cloth as traces of colour may otherwise show on subsequent colours (use FIMO to dab out any left-over bits). Then clean with soap and water. Tip: The use of metallic powder, talc or baby powder facilitates demoulding.
2
easy
Level of difficulty
medium
hard
You can find more creative tips at www.staedtler.com
Instructions for the clock using image transfer 4
5
First print out the pattern sheet for the eyes and clock and cover all over with a thin layer of FIMO liquid. Please note: Do not leave any areas uncovered.
Cut the motifs out, place them on the baking tray, weigh them down with magnets or coins and harden in the oven at 130째C for approx. 20 minutes.
6
After hardening, allow the motifs to cool and then cut them out.
7 Cleaning: Clean dirty brushes and clothing with acetone or orange peel oil. Storage: Store FIMO liquid at room temperature and avoid contact with PVC or polystyrene.
TIP: Larger motifs should be weighed down while drying too in order to avoid rippling. Gently rub the paper off in lukewarm water. A thin layer may remain. Then leave to dry. 3
easy
Level of difficulty
medium
hard
You can find more creative tips at www.staedtler.com
Instructions for the clock 9
8
For the clock, roll white FIMO out to an approx. 2 mm thick sheet. Roll half a strip of FIMO effect in metallic gold to make an approx. 2 mm thick length of string.
11
Brush around the edge with gold-coloured metallic powder.
10
Add a push mould ornament at the side and cut the whole object out with a kitchen knife.
Place the FIMO liquid image transfer onto the white sheet of FIMO and press on a little. Then position the golden FIMO string around it.
12
Next, thread the ring frames onto a bead-piercing needle and fill them with white FIMO. Place the imagetransferred eyes from steps 4 - 7 on top.
13
Cut an eyelet pin to size; stick it through the ring frame and into the edge of the clock at the top. It should at least extend to the middle of the pendant. Use FIMO liquid to stick hands on.
4
Level of difficulty
easy
medium
hard
You can find more creative tips at www.staedtler.com
Hardening and finishing 14
Place the earrings and pendant on the baking tray and harden in the oven for approx. 30 minutes at 110°C.
15
Once cool, cover all FIMO elements with a coat of gloss varnish; this gives them an attractive shiny finish and protects them at the same time.
16
Finish off by threading the individual elements onto a chain together with tubes and beads. Assemble the earrings using one bead and one eye for each one.
Important: Please note the different hardening times and temperatures. FIMO soft = 110°C / 30 minutes FIMO liquid = 130°C / 20 minutes
5
Level of difficulty
easy
medium
hard
You can find more creative tips at www.staedtler.com
Pattern sheet Steam punk is a new fashion trend which uses elements from steam and cogwheel drive mechanisms. Different FIMO liquid techniques can be used here, e.g. embedding, image transfer, colour effects. Simply use old watches, alarm clocks or other mechanical parts to craft totally new creations. There are no limits to what you can make.
6