19 minute read
G #100-011-242eN BrAvO cOMpANY GuNFiGHTer cOMpeNsATOr See
efficient Flash suppression; Models available that accept aaC sound suppressors
Three equally-spaced horizontal prongs efficiently reduce muzzle flash to help minimize the blinding effect of the flash on the shooter in low-light conditions. Short OAL and flat, smooth muzzle face with rounded edges prevents hang-ups and aids in unencumbered weapon deployment. Precision machined from heat-treated steel and finished with AA’s proprietary SCARmor™ coating that gives high surface hardness for added resistance to blast erosion. non-Mount models provides flash suppression only. 18t flash hider is an 18 tooth mount designed the for Advanced Armament’s first generation, fast attach silencers. Not compatible with the 51T ratchet mount or 90T ratchet mount taper silencers. 51t models have an integral 51-tooth ratchet mount that accepts Advanced Armament sound suppressors. 90t models have an integral 90-tooth ratchet mount that accepts Advanced Armament SR-5 and SR-7 silencers. All models are available in sizes to fit rifles chambered in 5.56mm/.223 (1/2 " -28 tpi muzzle threads) or 7.62mm/.308 (5/8 " -24 tpi muzzle threads). Choose model and caliber from table below. installation tool precisely fits the tines of all Blackout flash hiders for easy, smooth, secure installation without risk of damaging the tines. Accepts any 3/8" torque wrench. a b SPECS: 17-4 stainless steel, SCARmor finish, matte black. Non-Mount 5.56 - 21/8" (5.4cm) long. 7/8" (2.2cm) O.D. 2.9 oz. (82g) wt. Non-Mount 7.62 - 29/32" (5.7cm) long x 7/8" O.D. 2.6 oz. (74g) wt. 18T/51T/90T - 21/2" long, 7/8" O.D. 4.3 oz. (123.3g) approx. wt.
Advertisement
51T 7.62 Hider Non-Mount
stoCk # MoDeL CaLiBer tHreaD pitCH aCCepts supp. priCe
#276-000-010EN Non-Mount Hider 276-000-026EN 18T 5.56 Hider #276-000-013EN 51T 5.56 Hider #276-000-022EN 51T 5.56 Brake 276-000-046EN 90T T 5.56 Hider #276-000-016EN Non-Mount Hider 276-000-027EN 18T 7.62 Hider #276-000-014EN 51T 7.62 Hider 5.56 5.56 5.56 5.56 5.56 7.62 7.62 7.62 1/2"-28 1/2"-28 1/2"-28 1/2"-28 1/2"-28 5/8"-24 5/8"-24 5/8"-24 No Yes Yes Yes
6G48P04 $ 54.99 6G80K61 $ 89.99 6G88G90 $ 99.99 6G122D14 $ 139.99 SR-5/SR-7 only 6G97B71 $ 109.99 No 6G48E04 $ 54.99
Yes 6G80A61 $ 89.99
Yes 6G69J98 $ 99.99
#276-000-023EN 51T 7.62 Brake 7.62 5/8"-24 Yes
6G122I14 $ 139.99 276-000-047EN 90T T 7.62 Hider 7.62 5/8"-24 SR-7 Only 6G97E71 $ 109.99 #276-000-024EN Blackout Flash Hider installation tool, 6G30J00 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 35.00
Upgrade
ADVANCED ARMAMENT AR-15/M16/AR-STYLE .308 BRAKEOUT COMPENSATOR
Dual-Duty Device reduces Flash & Controls Muzzle rise
The AAC Brakeout comp gives you the best of both a compensator and a traditional flash suppressor. The closed-bottom compensator section effectively redirects gas to keep muzzle rise to a minimum, while the three-pronged flash hider at the front significantly reduces flash signature, even on short barrels. Beefy, solid steel construction and an ultra-hard SCARmor™ finish make the Brakeout highly resistant to blast erosion, allowing it to stand up under harsh operating conditions. Includes an adapter for attachment of AAC sound suppressors. Brakeout 2.0 has a symmetrical prong layout that does not require “timing” with shims for even simpler installation. a b SPECS: Steel, matte black SCARmor finish. 2.375" OAL. Length installed on rifle – 1.75". Mount – Ratchet mount. Approx. 4.2 oz. wt. Includes one-time use tube of Rocksett thread-locker and shims for installation. AR-15 fits rifles chambered in .223/5.56mm with ½"-28 tpi muzzle threads. AR-308 fits .308/7.62mm rifles with 5/8"-24 tpi muzzle threads. #276-000-017EN ar-15 Brakeout Compensator, 6G80F61 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 89.99 276-000-044EN ar-15 Brakeout 2.0, 6G101I79 � � � � � � � � � � � � � � � � � � � � � � � � � � 109.99 276-000-045EN ar-308 Brakeout 2.0, 6G101C79 � � � � � � � � � � � � � � � � � � � � � � � � � 109.99
Multi-Mode Compensator reduces Muzzle Climb & suppresses Flash
Multi-purpose compensator reduces muzzle climb, so you stay on target between shots during rapid fire engagements. Reduces flash signature and produces less concussion than the standard A2 flash hider for a smaller dust signature when shooting prone. 1.0/1.5/2.0 fit .223/5.56 rifles with 1/2"-28 tpi muzzle threads. 1.5 is pre-drilled for permanent pinning to a 14.5" barrel to extend it to a civilian-legal 16.1" OAL. 2.0 has the correct dimensions to accept add-on muzzle devices that fit over the standard A2 flash suppressor, including Gemtech Halo and AAC OMNI suppressors; does not accept blank firing adapter (BFA). Ba fits barrels chambered in calibers up to .308/7.62mm, including 6.5 Grendel, 6.8 SPC, 7.62x39mm, and .300 AAC Blackout. a b SPECS: Machined 17-4 PH stainless steel in natural silver matte stainless (MS) or with MIL-DTL 13924D Class IV black oxide finish. All models include required crush washer and/or shims. 1.0/1.5/2.0 fit .223/5.56 barrels with 1/2"-28 tpi muzzle threads. 1.0/2.0 - 13/4" (4.5cm) OAL. 1.5 – 21/8" (5.4cm) OAL. BA – 25/8" (6.7cm) OAL. Fits barrels with 5/8"-24 tpi muzzle threads, chambered in calibers up to .308/7.62mm. #100-008-511EN Battle Comp 1.0, Black, 3G135D00� � $ 139.99 #100-011-156EN Battle Comp 1.0, MS, 3G132H86� � � � 139.99 #100-008-512EN Battle Comp 1.5, Black, 3G137F14� � � 145.00 #100-008-514EN Battle Comp 2.0, Black, 3G146K50� � 155.00 #100-008-517EN Ba Battle Comp, Black, 3G194D29 � � 209.99 #100-011-158EN Ba Battle Comp, MS, 3G194I29 � � � � � 209.99
AR-15/M16/AR-STYLE .308 SHORT MUZZLE BRAKE
offers Maximum Braking in smallest possible size
Our low-profile muzzle brake effectively reduces recoil and muzzle rise, yet adds less than 1" length to the barrel. Two rows of ports evenly distribute exiting gasses and pressure. Wrench flats give simple installation. Available with either black oxide or natural stainless steel finish, the Short Muzzle Brake comes in both .223/5.56mm and .308/7.62mm calibers. a b SPECS: Machined stainless steel, matte black oxide (MB) or natural silver (SS) finish. 1" long. .223/5.56mm - .75" O.D. Fits ½"-28 tpi muzzle threads. .308/7.62mm - 1" O.D. Fits 5⁄8"-24 tpi muzzle threads.
Black
Stainless
#080-000-995EN .223/5.56 short Muzzle Brake, Black, 8K39J50 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 59.99 #080-000-996EN .223/5.56 short Muzzle Brake, SS, 8K39I50 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 59.99 #080-100-578EN .308/7.62 short Muzzle Brake, Black, 8K39I50 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 59.99 #080-102-578EN .308/7.62 short Muzzle Brake, SS, 8K44E97 � � � � � � � � � � � � � � � � � � � � � � � � � � � 59.99
CAVALRY ARMS AR-15/M16 CAV COMP
reduces Muzzle rise & recoil
Machined from bar stock with an integral, solid baffle that won’t shoot out. Top and side ports counter recoil and muzzle rise. Solid bottom controls dust printing. A 2-style looks correct on pre- and post-ban rifles. a b SPECS: Steel, black, matte finish. 13/4" (4.4cm) long, 3/4" (19mm) diameter, 1/2"-28 tpi. For .223 (5.56 NATO) caliber. #100-000-189EN .223 Cav Comp, 2K24Q30 � � � � � � � � � � $ 27.00
Caliber
BRAVO COMPANY AR-15/M16 GUNFIGHTER COMPENSATOR
Compensator reduces side Blast & accepts suppressors
The Gunfighter compensator reduces muzzle rise and flash, with a special baffling system that also limits side blast and the noise associated with typical compensators. Exterior dimensioned to accept blank firing adapter or flash hider mounted suppressors. Stainless steel construction and black oxide finish help resist heat and corrosion. Gunsmith installation recommended. standard Length fits .223/5.56mm rifles. extended Length models for both .223/5.56 and .308/7.62mm rifles brings 14.5" barrels up to 16", with a pre-drilled hole that allows permanent pinned attachment. a b SPECS: Stainless steel, oxide finish, matte black. .830" (2.1cm) O.D. Washer included. Standard – 1.7" (4.4cm) long, with ½"-28 threads. Extended – 2.1" (5.5cm) long, with ½"-28 (.223/5.56) or 5/8"-24 threads (.308/7.62). #100-011-242EN 5.56 gunfighter Comp, Std Length, 1E82K64� � � � � � � � � � � � � � � � � � � � � � � � � � � $ 89.99 #100-011-248EN 5.56 gunfighter Comp, Ext. Length, 1E88I17� � � � � � � � � � � � � � � � � � � � � � � � � � � � 94.99 100-014-858EN 7.62 gunfighter Comp, Ext. Length, 1E92P81 � � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99 retro Flash suppressor gives Your rifle a Vietnam-era Look
Classic design lets you give your AR-15 a vintage, Vietnam War-Era appearance, especially if installed on a skinny A1-type barrel. Retro-looking, six-port steel flash suppressor replicates the style of the original M16A1 suppressor, and still provides adequate practical flash suppression. a b SPECS: Machined steel, matte black finish. 1.75" (4.5cm) long, .86" (2.2 cm) O.D., 2 oz. (58g) wt. Fits barrels with standard 1/2" x 28 muzzle threads. Lock washer required, not included, correct size sold below. #231-000-307EN a1 Flash Hider, 1C6K29 � � � � � � � � � � � � � � � $ 7.49 #989-015-015EN tti Lock Washer, 5-Pak, 9H1A46 � � � � � � 2.99
DPMS AR-15 A2 FLASH SUPPRESSOR
reduces Muzzle Flash; Dissipates gas
Machined steel, five-port flash suppressor effectively controls muzzle flash to minimize shooter exposure in both daytime and lowlight situations. Ports are located along the top of the suppressor and bottom is solid to reduce dust printing when shooting prone. a b SPECS: Machined steel, matte black. 13/4" (4.4cm) long, 7/8" (2.2cm) O.D. 1/2"-28 tpi. Requires peel washer (not included) for proper indexing. #231-000-198EN ar-15 a2 Flash suppressor, 3B5J75 � � � $ 6.99
DPMS AR-15/M16 3-PRONG FLASH SUPPRESSOR
gives Your rifle the retro M16 Look
Old-style, 3-prong design looks correct on early guns and is perfect for assembling a 1960s-era M16 lookalike for collectors and reenctors. Mounts to any AR-15 or M16 barrel with the standard ½" x 28 thread pattern. Like the original, there are no wrench flats, so a strap wrench is recommended for installation. a b SPECS: Steel, matte black oxide finish. 1¾" (4.45cm) length, 7/8" (2.2cm) diameter. ½" x 28 threads. #231-000-340EN 3-prong Flash suppressor, 1C6H91 � � � $ 8.99
DPMS AR-15/M16 LEVANG LINEAR COMPENSATOR
reduces Muzzle Jump Without Hurting ears
Directs all of the muzzle blast and noise away from your ears. Large, single expansion chamber helps control muzzle flip and recoil. a b SPECS: Steel, blue, matte finish. 21/8" (5.3cm) long, .971" (24.6mm) diameter, 1/2"-28 tpi. #231-015-022EN Linear Comp, 3B29H99� � � � � � � � � � � � � $ 34.99
six-port Design Directs Blast away From shooter
Three large baffles with six side ports and no top vents direct muzzle gases to the side, away from the shooter. Effectively counters muzzle rise and recoil, minimizes felt muzzle blast. High volume shooters will appreciate reduced noise and ease of cleaning. Solid bottom minimizes dust printing when shooting prone. Easy installation, secured with the supplied locknut. Designed and used by Jerry Miculek. a b SPECS: Steel, parkerized finish. AR-15 Comp - 2" (5cm) long, .925" (23.5mm) diameter. 1/2"-28 tpi. AR-308 Comp - 2 3/8" (6.0cm) long, .925" (23.5mm) diameter. 5/8"-24tpi. #231-000-038EN ar-15 Miculek Comp, 1C36F13� � � � � � $ 39.99 231-000-369EN ar-308 Miculek Comp, 1C52F78 � � � � 59.99
Wipes out recoil & Muzzle Lift
Dual, curved restrictor plates with a tremendous amount of surface area stop exiting barrel gases and pull the barrel forward to counteract recoil and muzzle flip. The front sight or scope stays right on target for a faster second shot, plus less felt recoil and shooter fatigue. Models available for rifles chambered in .223/5.56mm and .308/7.62mm. a b SPECS: Steel, blued, matte finish. 11/2" (3.8cm) dia., 21/4" (5.7cm) long. .223 - 5.3 oz. (149g) wt. Fits 1/2"-28 tpi muzzle threads. .281" exit hole accommodates bores up to .243/6mm without modification; may be enlarged for bores up to .358". .308 - 4.8 oz. (136g) wt. Fits 5/8"-24 tpi muzzle threads. .350" exit hole may be enlarged to fit bores up to .416". #452-015-120EN .223 recoil eliminator, 2E85G71� � � � � $ 94.99 #452-000-066EN .308 recoil eliminator, 2E85I71� � � � � � 94.99
reduces Muzzle Flash & protects nearby personnel From side Blast
Unique design redirects concussion forward to provide better flash suppression than standard A2 suppressor on short-barreled rifles and other centerfire gasoperated weapons. Virtually eliminates side blast to protect nearby personnel during CQB, building entries, and when shooting from inside vehicles. Lessens felt recoil and reduces muzzle rise to help keep sights on the target for fast follow up shots and superior recoil management on full-auto assault rifles, especially with barrels 13" or shorter. High-carbon steel with matte black manganese phosphate finish stands up to the heat and pressure of thousands of rounds. Convenient, 3/4" wrench flats allow easy installation with the same wrench used to remove factory flash suppressor. Crush washer included. Each unit individually serial numbered for quality control. a b SPECS: Heat-treated steel, phosphate finish, matte black. 31/4" (8.2cm) O.A.L. 13/8" (3.5cm) diameter. 6.7 oz. (190g) weight. AR-15/M16/M4 fits rifles in 5.56mm/.223 with 1/2"-28 tpi muzzle threads. AR-308 fits rifles in 7.62mm/.308, and bolt-action rifles chambered up to .338 caliber with 5/8"-24 tpi muzzle threads. #100-003-335EN kX3 Flash suppressor, AR-15/M16/M4, 1A125D99 � � � � � � � � � $ 125.99 #100-009-319EN kX3 Flash suppressor, AR-308, 1A125F00 � � � � � � � � � � � � � � � � 125.00
Model
JP ENTERPRISES AR-15/M16 BENNIE COOLEY TACTICAL COMPENSATOR
Standard Profile Large Profile
efficient reduction of Felt recoil; standard profile For tactical Matches or Large profile For Maximum recoil reduction
Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. standard profile available for barrels with .750" or .875" O.D. at muzzle. Large profile is a beefed-up version of Standard model for .875" O.D. bull barrels and has extra baffle surface area for maximum reduction of felt recoil while retaining the cosmetics of the Standard series. Not legal for Limited Tactical Division competition. a b SPECS: Carbon steel, matte black oxide finish, or stainless steel, polished finish. Unless otherwise noted all models bored for .223/5.56mm with 1/2"-28 threads. .281" I.D. exit hole may be enlarged to fit other calibers. Installation instructions included. Standard Profile – 25/16" (5.9cm) long, .989" (2.5cm) O.D. Models to fit .750" (19mm) and .875" (22mm) O.D. barrels. SOF, WC 3-Gun, and USPSA Limited competition legal. Standard Profile for .308/7.62 has a .750" O.D., .350" exit hole, and 5/8"-24 tpi threads. SOF/Tactical/USPSA Limited legal. Large Profile – 23/4" (7cm) long, 1.22" (3.1cm) O.D. Fits .875" O.D. barrels. Not Limited/Tactical Division competition legal. #452-000-055EN standard .750" Comp, Blk, 2E77L14 � � $ 85.99 #452-000-056EN standard .750" Comp, SS, 2E77D14 � � 85.99 #452-000-057EN standard .875" Comp, Blk, 2E77G14� � 85.99 #452-000-058EN standard .875" Comp, SS, 2E77F14 � � � 85.99 452-000-089EN std. .308/7.62 Comp, Blk, 2E77E14 � � � 85.99 452-000-090EN std. .308/7.62 Comp, SS, 2E77B14 � � � 85.99 #452-000-059EN Large .875" Comp, SS, 2E85L71 � � � � � � 94.99
OPS INC. AR-15/M16/AR-STYLE .308 MUZZLE BRAKE
reduces Felt recoil; suppressor ready
Low-profile muzzle brake effectively suppresses flash, tames recoil, and is threaded to serve as an attachment device for OPS sound suppressors. Redirects muzzle blast laterally and slightly upward to reduce felt recoil and reduce muzzle flip to help you get back on target fast for enhances Muzzle Control & reduces Felt recoil
The LANTAC Dragon Muzzle Brake has vertical ports in the primary discharge chamber to counteract muzzle rise, while the Short Energy Pulse system decreases recoil length, preventing “stacking” of repeating shot energy and enabling fast, accurate follow-up shots. Even with fully automatic fire, the Dragon delivers significant reduced recoil and muzzle climb, so more shots land on target. Machined from ultra-hard steel, the Dragon is virtually impervious to heat, corrosion and wear. Flats on the side allow you to install it with any standard wrench. Includes crush washer for secure fit and proper indexing. a b SPECS: Carbon steel, nitride finish, black. Approx. 2.6" (6.6cm) long, .866" (22mm) O.D. .223 fits rifles chambered in .223/5.56mm NATO with 1/2"28 tpi muzzle threads. .308 fits .308/7.62mm NATO rifles with 5/8"-24 tpi muzzle threads. #100-013-596EN .223 Dragon MB, 6D115F86 � � � � � � � � � $ 125.19 100-015-462EN .308 Dragon MB, 6D128P00 � � � � � � � � 144.00
PRECISION ARMAMENT AR-STYLE .308 SEVERE-DUTY MUZZLE BRAKE
Product
Maximum recoil Control Helps You Quickly reacquire the target
Heavy-duty AR-308 muzzle brake machined from solid stainless steel billet has large internal baffles for maximum recoil management, so you can get the sights back on the target quickly. Threads and bore aperture are machined in a single operation to ensure perfect alignment. M11 is optimized for tactical situations requiring minimal dust signature. Large blast baffles redirect gases to the sides and upward to reduce recoil and keep the muzzle down. Wrench flats on top and bottom enable easy installation and removal. M41 is designed for long-range precision tactical or target rifles. Angled ports vent gases counter-clockwise to counteract recoil produced by heavy bullets and fast twist rates. Features 3/16" spanner wrench holes for easy installation and removal. Spanner wrench sold separately. a b SPECS: Machined HTSR 416 stainless steel, hardened to Rc 26-32, lowluster natural silver or matte black IonBond® DLC finish. 5/8"-24 tpi threads. Both models available for rifles chambered in .308/7.62mm or .338. M11 - 2.675" (6.8cm) long. 1.375" (3.5cm) wide, 1.188" (3cm) high. 5.6 oz.(158g) wt. M41 – 2.75" (7cm) long. 1.312" (3.3cm) maximum O.D., .925" (2.3cm) O.D. at barrel. 5.3 oz. (150g) wt.
M11 M41
#100-010-538EN .308 M11 MB, Black, 2D109E99 � � � � � $ 119.99 #100-011-352EN .308 M11 MB, Silver, 2D94H27 � � � � � � 109.99 #100-014-635EN .338 M11 MB, Black, 2D102B84 � � � � � 119.99 #100-014-636EN .338 M41 MB, Black, 2D102E84 � � � � � 119.99 #100-010-539EN .308 M41 MB, Black, 2D102H84 � � � � 119.99 #100-011-977EN .308 M41 MB, Silver, 2D94F27 � � � � � � 109.99 100-011-241EN M41 spanner Wrench, 2D15I99� � � � � 19.99 reduces recoil & Withstands Heat From automatic Fire
Compensator features a large initial expansion chamber which dissipates combustion gases at a lower pressure, then directs the gases to the side and rear through precisely canted vents. Innovative reverse venting design reduces recoil and blowback while eliminating muzzle rise. Closed bottom in compensator greatly diminishes dust signature. Machined from high strength stainless steel for corrosion resistantce, compensator will not erode due to the extreme heat of automatic fire. Fits .223/5.56mm AR-15 rifles with 1/2-28 muzzle threads. Accepts muzzle devices designed to fit over standard A2 flash suppressor. Available in Ionbond® DLC matte black finish or stainless steel in-the-white, satin finish. a b SPECS: HTSR 416 stainless steel bar stock, matte black or in-the-white stainless steel finish. 1/2-28 TPI thread. 2.25" (5.2cm) OAL. 0.875" (2.2cm) dia. 2.6 oz (73.7g) wt. Fits .223 Cal (5.56mm) caliber. #100-013-093EN severe Duty Comp, DLC Black, 2D77E13 � � � � � � � � � � � � � � � � $ 89.99 #100-013-197EN severe Duty Compensator, In-The-White, 2D77I13� � � � � � � � � � � � � � 89.99
PRECISION ARMAMENT EFAB HYBRID FLASH HIDER/BRAKE
superior Muzzle Control & effective Flash suppression
"Enhanced Flash Arresting Brake" (EFAB) hybrid flash suppressor/muzzle brake combines maximum recoil reduction and minimum concussion with powerful flash suppression. An array of diverging expansion nozzles both cool combustive gases and diffuses them away from the shooter. Effective on barrels as short as 10", so the EFAB is ideal for carbines, SBRs, and pistols. The closed bottom helps reduce dust signature when shooting prone. Muzzle brake includes a pilot hole for permanent pinning on 14.5" barrels to bring them to legal civilian length. a b SPECS: Machined stainless steel, IonBond CrCN finish, matte black. 2.47" (6.27cm) long, .9" (2.3cm) O.D. 3.5 oz. (99g) wt. 1/2-28 threads. For .223/5.56mm caliber rifles. Caution: Do not use crush washers. Precision Arms recommends using the Accu-Washer™ Muzzle Alignment System, sold separately, for installation. 100-015-978EN eFaB Hybrid Flash Hider/Muzzle Brake, 2D137J10 � � � � � � � � � � � � � � � � � � $ 151.99 #100-009-793EN 1/2" x 28 accu-Washer alignment system, 2D21L41� � � � � � � � � � � � � � � � � � 24.99
NEED HELP CHOOSING?
followup shots. .308 model accepts Ops 12th Model Suppressor; .223 accepts all Ops suppressors except 3rd Model. a b SPECS: Carbon steel, oxide coated, matte black. Approx. 2.1" OAL. .223 fits ½"-28 tpi muzzle threads; comes with crush washer, thread protector, and barrel sleeve. .308 fits 5/8"-24 tpi muzzle threads; comes with thread protector. #504-000-017EN .223 threaded MB, 4K185N71 � � � � � � $ 189.99 #504-000-018EN .308 threaded MB, 4K175D68� � � � � � 189.99
