M #100-017-333eN MAGpuL pMAG® GeN M3 ™ See

super-durable & ultra-dependable PMag - refined & Battle-hardened By Combat Experience

The polymer magazine that revolutionized magazine technology for the AR-15/M16/M4 platform just got even better. The third-gen- Standard Window eration PMAG further expands the 30-Rd 30-Rd strength, reliability, and versatility GEN M3 GEN M3 of the original PMAG. Along with all variants of the AR-15/M16/M4, the GEN M3 is fully compatible with the HK® 416 and MR556A1, M27 IAR, 40-Rd GEN M3 British SA-80, and even the FN® SCAR™ MK 16/16S. It’s molded from a new polymer formula that delivers distinctly greater resistance to crushing and all forms of impact, with extra reinforcement in the mag catch and feed lip areas. A new-design four-way anti-tilt follower ensures even smoother feeding, even when contaminated by dust or grit. Pop-off dust cover, included, helps minimize debris intrusion and prevent damage during storage. The removable floorplate is both stronger and slimmer for easier side-by-side carry in tight mag pouches. A pen dot matrix on each side allows consistent ID marking that resists handling wear. PMag 30 is available with plain, solid sides or a clear polymer window on each side that lets you see the load status at a glance. Windows are made from an all-new, advanced clear polymer formula that offers even more resistance to chemicals and impact than the original MagLevel PMAG. PMag 40 has solid sides. The added capacity means fewer reloads, saving precious seconds for competition shooters. a b SPECS: Impact/crush-resistant molded hard polymer, Black or Sand. Compatible with AR-15/M4/M16, HK® 416, MR556A1, M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and other similar lowers. 5.56mm/.223 ammunition only. #100-011-220EN PMag 30 gEn M3, Each, 3K12K35 � � � $ 14.20 #100-012-634EN PMag 30 gen M3, 10-Pak, 3K117E52 � � � � � � � � � � � � � � � � � � � � � � � � � � 135.00 100-017-333EN sand PMag gEn M3, Each, 3K12G35 � � � � � � � � � � � � � � � � � � � � � � � � � � 14.20 #100-011-219EN PMag 30 gEn M3 Window, Each, 3K15C24 � � � � � � � � � � � � � � � � � � � � � � � � � � 17.05 #100-015-262EN PMag 30 gEn M3 Window, 10-Pak, 3K152A97� � � � � � � � � � � � � � � � � � � � � � � � � � 164.99 100-017-332EN sand PMag gEn M3 Window, Each, 3K15D84 � � � � � � � � � � � � � � � � � � � � � � � � � � 17.05 #100-012-633EN PMag 40 gEn M3, Each, 3K17L45 � � � 18.95 #100-012-635EN PMag 40 gen M3, 10-Pak, 3K174I48 � � � � � � � � � � � � � � � � � � � � � � � � � � 184.99

NOTE: Due to high demand, availability of Gen M3 PMAGs sometimes may be limited.

PMag 20 gEn M3 - Brings all the GEN M3 enhancements of the 30-round model to the compact 20-round form factor. Departing from the previous PMAG 20 standard, the GEN M3 features a curved body with the same constant-curve geometry of the 30 round model. This not only helps ensure more reliable feeding, but it gives you a shorter mag that’s easier to handle in the prone position. #100-011-413EN PMag 20 gEn M3, Each, 3K11L97� � � � $ 13.25 #100-015-263EN PMag 20 gEn M3, 10-Pak, 3K118G90 � � � � � � � � � � � � � � � � � � � � � � � � � 127.99

PMag 10 gEn M3 - For the first time, there’s an ultracompact 10-round PMAG model, perfect for hunting and other applications where the lowest possible magazine profile is desired. Ideal when shooting off a backpack or using a bipod. Even better, the 10-round GEN M3 has all the durability, strength, and reliability enhancements of the rest of the GEN M3 line – including the anti-tilt follower and constant-curve radius of the body to aid in round-feeding. #100-011-418EN PMag 10 gEn M3, Each, 3K11C97 � � � $ 13.25 #100-015-264EN PMag 10 gEn M3, 10-Pak, 3K118N90 � � � � � � � � � � � � � � � � � � � � � � � � � 127.99

MAGPUL AR-15/M16/AR-STYLE .308 ROUND LIMITERS FOR GEN M3 PMAG®

drop-In Insert Temporarily reduces Mag Capacity

Hard polymer insert snaps into the floorplate to limit capacity for sporting or hunting applications. Installs easily without tools and requires no permanent alteration of the magazine. Will not make a banned magazine legal, as capacity reduction is not permanent. Minus 5 reduces capacity by 5 rounds; Minus 10 reduces capacity by 10 rounds. a b SPECS: Reinforced molded hard polymer, black. Sold in paks of 3. Fits Magpul Gen M3 PMAGs only. 5.56 models fit Gen M3 PMAGs for rifles chambered in 5.56x45 NATO and .223 Rem. 5.56 Minus 5 fits 10-, 20- and 30-rd mags. 5.56 Minus 10 fits 20- and 30-rd mags. 7.62 models fit Gen M3 PMAGs for rifles chambered in 7.62x51 NATO and .308 Win. 7.62 Minus 5 fits 10-, 20- or 25-rd mags. 7.62 Minus 10 fits 20- and 25-rd mags. #100-011-629EN 5.56 Minus 5 round Limiter for gen M3, 3K10F20 � � � � � � � � � � � � � � � � � � � $ 13.25 #100-011-631EN 5.56 Minus 10 round Limiter for gen M3, 3K9B85� � � � � � � � � � � � � � � � � � � � 13.25 #100-014-092EN 7.62 Minus 5 round Limiter for gen M3, 3K10I20 � � � � � � � � � � � � � � � � � � � 13.25 #100-014-093EN 7.62 Minus 10 round Limiter for gen M3, 3K10C20� � � � � � � � � � � � � � � � � � � 13.25

MAGPUL AR-15/M16 EMAG™

rugged, dependable 30-rd Magazine Compatible With a Wide range Of ar-Type Weapon Platforms

Lightweight molded polymer magazine combines features of Magpul’s popular PMAG® with exterior dimensions engineered to meet NATO STANAG 4179 compatibility requirements. The EMAG (Export MAGazine) is fully compatible with all AR-15/M16 variants, HK 416, FN SCAR, SA-80, Beretta ARX-160, IMI Tavor, and other .223/5.56mm weapons that use AR-type mags. The crush-resistant, one-piece body of fiberglass-reinforced molded polymer has a slim, unribbed exterior that ensures it’ll fit in magazine pouches and couplers designed for USGI M16 magazines. The EMAG has the same sealed, constant-curve body and self-lubricating anti-tilt follower as the PMAG, and even accepts the PMAG Ranger Floorplate (available separately). A MagLevel window on the left side with numeric indicators (5, 15, and 25 rounds) molded into the body and a bright orange marker on the spring provide instant visual feedback on ammo status. Stainless steel spring is coated with a tough MIL-DTL-13924D black oxide finish. Quickrelease, snap-on cover protects the top round, seals out dirt, and prevent mag lip stretching during storage with mag fully loaded. Cover also serves as a floorplate removal tool and a gauge for checking feed lip gap. Flared floorplate removes easily for cleaning and provides a pronounced grasping surface for pulling the EMAG from a mag pouch. a b SPECS: Molded polymer body and follower, stainless steel spring. Available in black only. 30-round capacity. #100-004-886EN Magpul EMag, Each, 3K16B89 � � � � � � �$ 18.95 #100-006-963EN Magpul EMag, 10-Pak, 3K174L76 � � � � 179.99

PMag + MagLInK KITs - Kit features a polymer magazine coupler and two 30 round mags. Select coupler and two M3 PMAGs, or coupler and two M3 Maglevel PMAGs with windows. 100-015-739EN ar15/M16 M3 PMags + MagLInK, 3K37P43� � � � � � � � � � � � � � � � � � � � � � � � � � � $ 42.99 100-015-740EN ar15/M16 M3 MagLEVEL PMags + MagLInK, 3K44C52� � � � � � � � � � � � � � � � 47.99 Lightweight, nearly Indestructible, Low-Profile For Target shooting

Carry more mags with minimal extra weight. These 10-round magazines are made from light, extra-tough, nylon-impregnated, ABS plastic that’s impact resistant and won’t break down, rot or rust. Includes tempered steel springs and self-lubricating nylon followers. a b SPECS: Nylon ABS, black. Will fit M16. #556-115-210EN MgW 10-rd ar-15 Magazine, 6E14H48 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 17.99

Paks

MAGPUL AR-STYLE .308 PMAG® LR/SR GEN M3™

Brings Third generation Of Improvements To a Variety of .308 rifles

Molded polymer magazines deliver all the benefits of the AR15/M16 PMAG GEN M3s for ultrareliable function in a variety of AR-style rifles chambered in .308/7.62mm. They include the same anti-tilt follower, constant-curve body, low-profile ribs, snap-on dust cover, and slim floorplate. Optimized for .308/7.62mm NATO ammunition within SAAMI overall length specifications. PMag 25 Lr/sr comes with the anti-glare, transparent window on both sides and painted indicator on the spring to rapidly track remaining rounds. PMag 25 M118 is specifically designed for enhanced reliability in rifles that accept longer than SAAMI-spec match ammunition with an OAL up to 2.830", such as Winchester .308 Match ammo. PMag 20 Lr/sr is designed specifically for military-issue MK11/M110 rifles and is less than half the weight of a standard-issue steel magazine. Like the AR-15/M16 GEN M3, both 25- and 20-round models have aggressive front and rear texture for positive grip, plus a pen dot matrix on the lower panel of each side for durable, consistent identification marking. PMag 10 Lr/sr offers true 10-round capacity that does not require limiters, pins, rivets, etc. a b SPECS: Impact/crush-resistant molded polymer, black. Stainless steel spring. Fits AR-style .308 rifles built for the SR-25/M110 magazine pattern, including ArmaLite® AR-10A, Bushmaster 308 ORC, Colt LE901-16S™, CORE Rifle Systems CORE30®, DPMS LR-308, JP Enterprises LRP-07™, Knights Armament SR-25, LaRue OBR™, Les Baer .308, LMT® .308 MWS, LWRCI™ R.E.P.R., Mega Arms MATEN, Patriot Ordnance Factory P308, Remington® Model R-25™, Ruger® SR-762™, S&W M&P10, and SIG716. Not compatible with ArmaLite AR-10B, Noveske N6, Springfield Armory M1A™, Rock River Arms LAR-8, FN SCAR® 17S, PTR-91, HK417, or any rifle using M14, FN FAL, or HK 91/G3 patterned mags. #100-011-564EN PMag 25 Lr/sr gEn M3 Window, Each, 3K19I40 � � � � � � � � � � � � � � � � � � � � � $ 21.80 100-015-747EN PMag 25 Lr/sr gEn M3 Window, 5-Pak, 3K100K34� � � � � � � � � � � � � � � � � � � 107.99 100-015-748EN PMag 25 Lr/sr gEn M3 Window, 10-Pak, 3K200A69 � � � � � � � � � � � � � � � � � 209.99 #100-011-563EN PMag 20 Lr/sr gEn M3, Each, 3K16L84� � � � � � � � � � � � � � � � � � � � � 18.95 100-015-745EN PMag 20 Lr/sr gEn M3, 5-Pak, 3K78G41� � � � � � � � � � � � � � � � � � � � 87.99 100-015-746EN PMag 20 Lr/sr gEn M3, 10-Pak, 3K156I83 � � � � � � � � � � � � � � � � � � 165.99 #100-011-562EN PMag 10 Lr/sr gEn M3, Each, 3K16P57 � � � � � � � � � � � � � � � � � � � � � 18.00 100-015-743EN PMag 10 Lr/sr gEn M3, 5-Pak, 3K82E83� � � � � � � � � � � � � � � � � � � � 87.99 100-015-744EN PMag 10 Lr/sr gEn M3, 10-Pak, 3K165G66 � � � � � � � � � � � � � � � � � 174.99 100-016-530EN PMag 25 M118 Lr/sr gEn M3 Window, Each, 3K20C79� � � � � � � � � � � � 21.80 Easy-To-grasp Loop For Fast, Positive Mag handling

Replacement floorplate improves the handling of GEN M3 PMAGs and helps bring superior speed, precision and control during high-stress, tactical magazine changes. Similar to the original Magpul USGI Ranger Plate, the ergonomic design incorporates an easy-to-grasp finger loop and grooved thumb dimple that aid in positive extraction from tight mag pouches. Made of reinforced polymer with overmolded, nonslip rubber loop that also cushions the magazine from impact if dropped on hard ground. a b SPECS: Reinforced polymer base, overmolded rubber loop, black. 3 per pak. 5.56 fits GEN M3 PMAGs for rifles chambered in 5.56x45 NATO/.223 Rem; 7.62 fits GEN M3 PMAGs for rifles in 7.62x51 NATO/.308 Win. Do not fit GEN M2 MOE® PMAGs, EMAG™, 30G MagLevel™, old 7.62x51 PMAGs, or any metal magazine. #100-011-590EN 5.56 PMag gEn M3 ranger Plate 3-Pak, 3K10C64 � � � � � � � � � � � � � � � � � � � � $ 14.20 #100-014-094EN 7.62 PMag gEn M3 ranger Plate 3-Pak, 3K10D94 � � � � � � � � � � � � � � � � � � � � 14.20

METALFORM AR-15/M16 9MM COLT-STYLE MAGAZINE

all-steel Construction For reliability & durability

Rugged, all-steel, high-capacity magazines for 9mm AR-15 conversions that use a Colt-style magazine. Metal follower won’t distort under a full load and aids smooth, reliable feeding. Holdopen feature works with ARs fitted with holdopen on the conversion block. Easy-to-remove floorplate makes disassembly fast and simple. Fits Colt and Rock River conversions with a lower receiver conversion block. a b SPECS: Steel, Parkerized, dark gray (32 round), or black oxide finish (10 round & 20 round). #620-000-021EN 32-rd 9mm Colt-style Mag, 2F30A30� � $ 39.99 #620-000-020EN 20-rd 9mm Colt-style Mag, 2F30P92� � 35.99 #620-000-024EN 10-rd 9mm Colt-style Mag, 2F30M30 � � 39.99

NORDIC COMPONENTS AR-15/M16 PMAG EXTENSION

Increases Capacity Of 30-round PMag To 48 rounds

Lightweight, streamlined clamp-on kit increases the capacity of a 30-round Magpul PMAG to a full 48 rounds. Perfect for competition and tactical operations where more rounds and fewer mag changes can make the difference between winning or losing. Easy to install: simply remove the PMAG’s floorplate, clamp the mag body extension to the PMAG by tightening the four steel socket head cap screws, install the kit’s replacement spring, reinstall the original floorplate on the extension, and you’re ready to shoot. Available in Black or Clear for fast visual checks of ammo status. Works with both standard and MagLevel PMAGs. Nordic guarantees at least an 18-round increase in capacity. a b SPECS: Molded polymer, black or clear. 2.4 oz. (68g) weight. Kit contains extension, (4) screws, spring, and instructions. 30-round PMAG not included. #100-004-544EN PMag Extension, Black, 1B18L97 � � � � $ 21.99 #100-004-543EN PMag Extension, Clear, 1B19L64 � � � � 26.99

single round Loading For Competition & Varminting

Self-lubricating, Delrin® loading block replaces the magazine and follower for smooth, single round loading. Bolt holds open after every shot. CNC-machined loading tray ensures proper cartridge alignment and reliable feeding. OBs10 provides a short, match-length loading block. OBs20 is the same size and shape as a 20-round AR-15 magazine; approved for Service Rifle competitions. a b SPECS: Delrin. OBS10 - Approx. 21/2" (6.4cm) long, 7/8" (2.2cm) wide, 3" (7.6cm) high. OBS20 - Approx. 21/2" long, 7/8" wide, 5" (12.7cm) high. Fits AR-15/M16, .223 cal. #100-001-736EN OBs10 Bob sled, 7A37H25 � � � � � � � � � � $ 42.99 #100-001-737EN OBs20 Bob sled, 7A37I25� � � � � � � � � � � 43.99

PRO-MAG AR-15/M16 32-ROUND 9MM MAGAZINE

For reliable Operation In sub-Caliber Conversions

Rugged, high-capacity magazine is designed for 9mm AR-15 conversions like Colt and Rock River Arms that use a Colt or modified UZI magazine. Lightweight, reinforced molded polymer body resists damage if dropped on a hard surface and has deeply molded grasping ridges to give you a firm hold when inserting the mag into the rifle. An antitilt follower aids in smooth movement of the round stack for reliable feeding. Removable floorplate for easy cleaning. Requires a lower receiver conversion block, available separately. a b SPECS: Reinforced molded polymer, black. 32-round capacity, 9mm Luger only. #687-000-022EN 32-rd 9mm ar-15 Mag., Polymer, 7H11E89� � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 13.99

Capacity

SMITH & WESSON M&P15-22 REPLACEMENT MAGAZINES

rugged, Factory Magazines For Consistent, reliable Feeding

High-quality, factory original magazine ensures smooth operation and feeding because it’s the same magazine that came with your rifle. Built with rugged, selflubricating molded polymer components, including one-piece body, follower, and removable floorplate, plus a precision wound steel spring. Load-assist button for fast reloads, and viewing slot to show you exactly how many rounds you have left. SPECS: Reinforced injection-molded polymer. Approx. 81/4" (21cm)" long x 7/8" (2.2cm) thick. Fits M&P15-22. 10-Rd available with round-count limited full-length mag body or compact short body (SB).

10-Rd Short Body

#940-001-027EN M&P15-22 Magazine, 25-Rd, 4Z18H54 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 19.99 940-001-044EN M&P15-22 Magazine, 10-Rd, 4Z20K34 � � � � � � � � � � � � � � � � � � � � � � � � � � 24.99 940-001-043EN M&P15-22 Magazine, 10-Rd SB, 4Z15F98� � � � � � � � � � � � � � � � � � � � � � � � � � � 19.99 Fits Most ar-style .308 rifle Platforms

Rugged steel, phosphate-treated magazine stands up to the harsh conditions of combat and competition. Self-lubricating polymer follower and heat-treated, precision-wound spring delivers 20 rounds of ammo reliably and consistently. Steel floorplate easily removes for cleaning. Fits DPMS Panther LR series rifles (.243, .260, .308 cal.), Knight’s Armament SR-25, Remington R-25 (.308), and Stoner SR-25. a b SPECS: Steel, heat treated, black oxide finish, polymer follower, 20-round capacity. 55/8 long. Fits DPMS Panther LR series rifles (.243, .260, .308 cal.), Knight SR-25, Remington R-25 (.308), and Stoner SR-25. Does not fit the ArmaLite® AR-10®, Rock River Arms, or any rifle using an FN/FAL magazine. #687-000-069EN ar-style .308 Magazine, 7H20C07 � � �$ 22.99

SUREFIRE AR-15/M16 60 & 100 ROUND MAGAZINES

More Firepower & Fewer Mag Changes

Ultra-high capacity magazines keep your rifle running longer between mag changes during competition or tactical operations. These magazines meet NATO STANAG 4179 specifications and are compatible with all rifles that accept AR-15/ M16/M4 magazines. Less than two standard magazines wide, so they’re easy to hold and handle with one hand. 60-round model fits most dualmag pouches for 30-round magazines. Weight is centered under the weapon to help you maintain a normal shooting grip and stance. Seats fully loaded on a closed bolt. “Nesting” nylon followers require no lubrication and fully support the round stack to aid in reliable feeding. Cadmium coating on springs reduces friction and resists corrosion. a b SPECS: Aluminum body, hardcoat anodized, matte gray finish. Nylon followers. Cadmium-coated springs. 60-Rd – 8.7" (22.1cm) tall, 1.66" (4.2cm) wide at base. 6.4 oz. (181g) wt. empty, 2 lbs. (907g) wt. fully loaded. 100-Rd – 12.2" (31cm) tall, 1.66" wide at base. 9.6 oz. (272g) wt. empty, 3.3 lbs (1.5kg) wt. fully loaded. #152-000-096EN surefire 60-rd Magazine, 6H107N14 � � � � � � � � � � � � � � � � � � � � � � � � $ 116.10 #152-000-097EN surefire 100-rd Magazine, 6H143G08� � � � � � � � � � � � � � � � � � � � � � � � 161.10 durable steel Magazines resist Wear, Maintain Their shape

Make the most of your 6.8mm chambered AR with long-wearing, extra-tough steel magazines. Hardened steel bodies with tempered feed lips hold their shape and won’t flex, bend, or deform. Tempered steel springs help maintain reliable feeding and function even with the heavier 6.8mm cartridge. Lightweight, Magpul brand, nylon composite followers are marked 6.8 to avoid confusion with AR magazines for other calibers. Available in 10-, 15-, or 25-round capacity. a b SPECS: Steel, blue. Fits. AR-15/M16 rifles chambered for 6.8 x 43mm Rem. SPC. #714-000-002EN 10-round 6.8mm Mag, 4A34M90 � � � $ 40.99 #714-000-010EN 15-round 6.8mm Mag, 4A35C29 � � � � 41.99 #714-000-001EN 25-round 6.8mm Mag, 4A35J71 � � � � 43.00

BOONIE PACKER PRODUCTS AR-15

S&W RIMFIRE MAGAZINE ADAPTER

Lets You use s&W M&P1522 Mags With Your CMMg .22 Conversion

Easy-to-install adapter converts the reliable, easyto-load Smith & Wesson M&P15-22 magazine for use in an AR15 fitted with a dedicated .22 LR upper or a CMMG conversion unit. Unique design has an independent bolt catch that locks the bolt back on the last shot and keeps it there when the magazine is removed, just like on a standard centerfire AR-15. This allows easier reloads and provides a visual indicator that the gun is empty after the last round is fired. Will not fit DPMS, Chiappa, and Tactical Solutions units. a b SPECS: 6061 aluminum body, natural finish. 1018 steel bolt catch, casehardened. #100-012-169EN Magazine adapter, 7K37K10� � � � � � � � � �$ 39.95

X PRODUCTS AR-15/M16/AR-STYLE .308 50-ROUND DRUM MAGAZINES

Easy-Loading Mag With Plenty Of Capacity - More shooting, Less reloading

Rugged, reliable 50-round drum magazine provides plenty of capacity and reduces reloading time. Rated for full-auto fire, the low-profile drum is still compact enough for shooting from the prone position. Integral hand wheel makes it easy to crank back the spring for quick loading/ unloading. a b SPECS: Aluminum, friction-reducing ceramic finish, matte black. Approx. 4" O.D., 1.7 lbs. empty wt., 4.9 lbs. (2.2kg) loaded wt. X-15 fits standard AR-15/M16, Bushmaster ACR, and other rifles that accept STANAG magazines and have with M4-type feed ramps. Will not work in FN SCAR or IWI Tavor. X-25 fits DPMS LR-308, LWRC, Bushmaster, Patriot Ordnance Factory, Mega Arms, PWS, LMT, JP Enterprises, Fulton Armory, and Knight’s Armament SR-25 AR-style .308 rifles. #100-011-442EN X-15 50-rd drum Magazine, 4B215K00 � � � � � � � � � � � � � � � � � � � � � � � � �$ 215.00 #100-009-834EN X-25 50-rd drum Magazine, 4B275B00 � � � � � � � � � � � � � � � � � � � � � � � � � 275.00

MAGPUL AR-15/M16 ENHANCED SELF-LEVELING FOLLOWER

Won’t Tilt; Feeds rounds smoothly; helps Prevent Magazine-related Failures

Drop-in replacement follower for USGI 30-round magazines won’t tilt, so it helps prevent jams, misfeeds, and other magazine-related failures. Rectangular extensions at the front and rear prevent tilt of the round stack to eliminate jams caused by over-compression and binding of the spring. Self-lubricating polymer composition helps ensure smooth movement for easy loading and ultra-smooth feeding. Extended bolt catch makes sure bolt locks open after the last round is fired. A spring stabilizer molded into the underside keeps spring force centered no matter how many rounds are in the mag, rounded edges on the extensions for even slicker movement in the mag body, and more streamlined ramp geometry for easier travel of the round from the magazine into the chamber. a b SPECS: Molded polymer, high-visibility yellow. Fits standard 30-round magazine. Instructions included. Sold in 3-paks. #100-009-896EN Enhanced self-Leveling Follower 3-Pak, Yellow, 3K4M69 � � � � � � � � � � � � � � � $ 5.65

AR-15/M16 HIGH-CAPACITY MAGAZINE REBUILD KIT

Brings usgI-Type Magazines Back To Top Performance

Replacement spring, follower, and floorplate install easily to eliminate problems caused by worn-out parts. Chrome silicon spring maintains proper tension and gives consistent feeding, also available with stainless steel spring. 20- and 30-round followers are made of fiberglass-filled plastic. Anodized aluminum floorplate. Available for straight body 20-round magazines and mil-spec 30-round magazines. a b SPECS: Spring - Chrome silicon (CS) or stainless steel (SS).30-Rnd Follower - Fiberglass-filled plastic, green. 20-Rnd Follower - Fiberglass-filled plastic, black. Floorplate - Aluminum, anodized black. Kits available in 1, 3, & 6 Paks. Kits and individual components for 20-round magazines are designed to fit straight body, 20-round magazines.

STRAIGHT BODY 20-ROUND REBUILD KIT

sTK# Cs sTK# ss PaK PrICE #080-000-470EN #080-000-473EN 1 9Z3A12 $ 3.99 #080-000-471EN #080-000-474EN 3 9Z7H68 $ 9.99 #080-000-472EN #080-000-475EN 6 9Z13P56 $ 17.99

30-ROUND REBUILD KIT sTK# Cs sTK# ss PaK PrICE #080-000-281EN NA 1 9Z3P12 $ 3.99 #080-000-282EN NA 3 9Z7L68 $ 9.99 #080-000-283EN #080-000-358EN 6 9Z14J37 $ 17.99

#080-000-476EN 20-round straight Body Mag spring (Cs), only, each, 9Z3G80� � � � � � � � � � � � � $ 4.99 #080-000-477EN 20-round straight Body Mag spring (Cs), only, 10-pak, 9Z34M54 � � � � � � � � � 39.99 #080-000-311EN 30-round spring (Cs), only, each, 9Z1A99 � � � � � � � � � � � � � � � � � � 2.99 #080-000-324EN 30-round spring (Cs), only, 10-pak, 9Z15I51 � � � � � � � � � � � � � � � � 19.99 #078-000-109EN 30-round spring (ss), only, each, 9Z1A76 � � � � � � � � � � � � � � � � � � 2.99 #078-000-114EN 30-round spring (ss), only, 10-pak, 9Z13K60 � � � � � � � � � � � � � � � 19.99 #080-000-481EN 20-rnd straight Body Mag Floorplate, each, 9Z1M47 � � � � � � � � � � � � � � � � � � � � � � 1.79 #080-000-482EN 20-rd straight Body Mag Floorplate, 10-pak, 9Z10I45 � � � � � � � � � � � � � � � � � � � � 12.99 #080-000-312EN 30-round Magazine Floorplate, each, 9Z1L29 � � � � � � � � � � � � � � � � � � � � � � � 1.79 #080-000-322EN 30-round Magazine Floorplate, 10-pak, 9Z9D60 � � � � � � � � � � � � � � � � � � � � 11.99 #080-000-479EN 20-rd straight Body Mag Follower, each, 9Z1G19� � � � � � � � � � � � � � � � � � � � � � � 1.49 #080-000-480EN 20-round straight Body Mag Follower, 10-pak, 9Z8C23 � � � � � � � � � � � � � � � � � � � � 10.97 #080-000-313EN 30-round Mil-std Follower, each, 9Z1E19 � � � � � � � � � � � � � � � � � � � � � � � 1.99 #080-000-317EN 30-round Mil-std Follower, 10-pak, 5E8C38 � � � � � � � � � � � � � � � � � � � � 10.99 #080-000-478EN 20-round straight Mag Body, each, 9Z7F64 � � � � � � � � � � � � � � � � � � � � � � � 8.99 #100-001-985EN 30-round Mag Body, each, 9Z7J92� � � 8.99