34 minute read
G #100-011-895eN MiDWesT iNDusTries GeN2 ss HANDGuArD See
Increases Your accessory Mounting Versatility
Extremely lightweight, free floating handguard incorporates Magpul’s M-LOK attachment system that allows users to add accessory rail sections only where needed. Super slim handguard has a 1.5" outside diameter while the dehorned, non-abrasive finish feels smooth and comfortable in the hand. Handguard has five, antirotational QD sling swivel sockets plus a 1913 Picatinny T-marked top rail for easy positioning optics and accessories. Includes proprietary barrel nut, barrel nut wrench, and one five slot Magpul M-LOK rail section. a b SPECS: 6061 aluminum, hardcoat anodized, black. 1.5" (3.8cm) outside dia. 1.3" (3.3cm) inside dia. Includes proprietary barrel nut, barrel nut wrench, and a five slot Magpul M-LOK rail section. Carbine - 9" (22.8cm) OAL, 7.2 oz. (204.1g) wt. Mid-Length - 10.5" (26.7cm), 7.8 oz. (221.1g) wt. Rifle - 12" (30.5cm) OAL, 8.7 oz. (246.6g) wt. or 15" (38.1cm) OAL, 10.1 oz. (286.3g). #100-016-958EN 9" ss M-Lok hg, 2A139I29 � � � � � � � � � $ 149.95 #100-016-959EN 10" ss M-Lok hg, 2A148P58 � � � � � � � 159.95 #100-016-960EN 12" ss M-Lok hg, 2A157H15 � � � � � � � 179.95 #100-016-961EN 15" ss M-Lok hg, 2A178E58 � � � � � � � 189.95
Advertisement
MIDWEST INDUSTRIES AR-15/M16
GEN II SS SERIES KEYMOD HANDGUARD
super slim, Ergonomic design
Lightweight free float, handguard features a bolt-on KeyMod rail that let you mount accessories exactly where you need them without the weight and bulk of unused rail space. Full-length T-marked MIL-STD 1913 Picatinny top rail fits flush against the upper receiver, creating a monolithic expanse of rail for easy mounting of long-eye-relief optics. Fully dehorned handguard is easy on the hands, while the exceptionally narrow 1½" outside diameter is easy to grip and fits securely in your hand. Five limited rotation QD swivel points, two in the rear and two in the front, plus a forward one on the bottom, provide multiple sling mounting options. Proprietary barrel nut, barrel nut wrench, and one 2.1" keymod rail section are included. Some minor gunsmithing is required for installation. Additional 2.1" (5 cross-slots) and 3.75" (9 cross-slots) KeyMod rails sold separately. a b SPECS: Machined 6061 aluminum, Type III hardcoat anodized, matte black (BLK) or flat dark earth (FDE). 11/2" (3.8cm) O.D. Includes proprietary barrel nut, barrel nut wrench, and one KeyMod rail section. Carbine - 10" (25.4cm) long. 7.7 oz. (218.3g) wt. Mid-Length - 12" (30.5cm) long. 8.5 oz. (241g) wt. Rifle - 15" (38.1cm) long. 9.9 oz. (280.7g) wt. #100-014-281EN 10" Carbine ss KeyMod handguard, BLK, 2A160J00 � � � � � � � � � � � � � � � � � � � � $ 174.95 #100-014-283EN 10" Carbine ss KeyMod handguard, FDE, 2A160P00 � � � � � � � � � � � � � � � � � � � � 174.95 #100-013-998EN 12" Mid-Length ss KeyMod handguard, BLK, 2A171L43� � � � � � � � � � 199.95 #100-014-284EN 12" Mid-Length ss KeyMod handguard, FDE, 2A171D43 � � � � � � � � � 199.95 #100-014-282EN 15" rifle ss KeyMod handguard, BLK, 2A192M86 � � � � � � � � � � � � � � � � � � � � � � � � � 219.95 #100-014-285EN 15" rifle ss KeyMod handguard, FDE, 2A192J86� � � � � � � � � � � � � � � � � � � � � � � � � � 219.95 #100-014-342EN 2.1" KeyMod 5-slot rail, 2A17E86� � � � 18.99 #100-014-345EN 3.75" KeyMod 9-slot rail, 2A21N79 � � 23.99
MIDWEST INDUSTRIES AR-15/M16
SS SERIES FREE-FLOAT HANDGUARDS
ultra-Light, Clutter-Free design With Modular rails For Tactical Versatility
Free-float handguard of lightweight yet rugged machined aluminum has a full-length MIL-STD 1913 Picatinny top rail and two, modular bolt-on rails for mounting tactical accessories exactly where you need them. Cuts down on weight and clutter by eliminating unused rail space. Plenty of large vent holes help air circulation to cool barrel, and also serve as mounting holes for the modular rails using the included hardware. Top rail mates with receiver rail without a gap for a monolithic look, and is T-marked with white numbering for ease in removing and remounting a scope or red dot sight without loss of zero. Generous internal clearance accommodates gas piston systems from CMMG, Osprey Defense, and Ares Defense (won’t fit Adams Arms). Accepts Midwest Industries T- and P-Series Trim Rings, available separately. a b SPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black. Steel jam ring, matte black. Handguard – 2" (5cm) wide without attachments, 21/4" (5.7cm) high from bottom to top of rail. Includes 2" (5cm) and 4" (10.1cm) rails, mounting hardware, and instructions. Carbine – 7" (17.8cm) long. Mid-Length – 9" (22.9cm) long. Rifle – Available in 12" (30.5cm) and 15" (38.1cm) lengths. #100-005-332EN 7" Carbine ss hg, 2A125P00 � � � � � � � $ 139.99 #100-005-333EN 9" Mid-Length ss hg, 2A129K00 � � � 154.99 #100-005-334EN 12" rifle ss hg, 2A150B00 � � � � � � � � � 164.99 #100-005-335EN 15" rifle ss hg, 2A164C29 � � � � � � � � � 179.99
ss sErIEs handguard sLIng adaPTEr - Bolt-on hardware lets you maximize accessory mounting options while adding minimal weight and bulk. Heavy duty, quick-detach sling swivel accepts slings up to 11/4" wide, and limits travel to prevent sling wrapping while still allowing necessary movement. SPECS: Base - Machined 6061 T6 aluminum, hardcoat anodized, matte black. Fits SS Series handguards only. Mounting hardware included. Swivel - Steel loop, black oxide finish. Accepts slings up to 11/4" (3.2cm) wide. Base is 21/4" (5.7cm) long x 5/8" (1.6cm) wide. 1.5 oz. (43g) wt. 100-005-701EN ss sling adapter, 2A28D59 � � � � � � � � � $ 31.99
Improves handling & reduces heat Buildup
Tubular free-float forearm is made of lightweight, high-strength carbon fiber to reduce heat transfer to the shooter’s hand during sustained fire and provide excellent handling characteristics. Precisionmade, aluminum barrel nut rigidly clamps the forearm to the upper receiver. Generous porting on enhances heat transfer while reducing weight even more. Ported/railed fits rifle-length AR-15/M16 gas system and provides 28 cooling ports, three 31/2" Picatinny rails that can be repositioned for specific needs, and an 81/2" top rail. dPMs 308 is designed specifically for DPMS-pattern AR-style .308 rifles and includes four Picatinny rails. a b SPECS: Tube – Carbon fiber, natural black/silver finish.2" (5cm) O.D. Barrel nut – Aluminum, hard-anodized, matte black. Rifle – 121/2" (31.8cm) long. Mid-Length – 91/8" (23.2cm) long. DPMS 308 – 143/4" (37.5cm) long. Fits DPMS LR-308 and rifles patterned after it. #714-000-011EN gen III Forearm, Ported/Rails, 4A310J81� � � � � � � � � � � � � � � � � � � � � � � � � $ 319.99 #714-000-023EN gEn III Forearm, DPMS 308, 4A326N90� � � � � � � � � � � � � � � � � � � � � � � � 345.00
ultra-slim Profile helps Keep rifle Light & Maneuverable
Machined aluminum free-float handguard offers many of the same features as the original SS Series handguards, with less weight and a slimmer profile. Only 11/2" wide, the Gen2 models include a bipod stud and three bolt-on 21/2" rail sections, one with a built-in anti-rotation QD socket, that can be mounted anywhere. MIL-STD 1913 top rail offers T-marks for mounting points, and gives a neat, monolithic look with your flattop upper. Included barrel nut and barrel nut wrench enable easy mounting. Accepts Gen2 SS-Series accessories only, not original SS-Series accessories. 7" Carbine and 9" Mid-Length models leave the gas block exposed. 10" Carbine, 12" and 15" Rifle models require low-profile gas blocks. a b SPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black (BLK) or flat dark earth (FDE). 11/2" (3.8cm) O.D. Includes proprietary barrel nut and wrench and instructions. Gunsmith installation recommended; will not fit most piston systems. Carbine – 7" (17cm) long, 7.1 oz. (201g) wt., or 10" (25cm) long, 8.6 oz. (243g) wt. Mid-Length – 9" (30cm) long. 8.3 oz. (235g) wt. Rifle – 12" (30cm) long, 9.3 oz. (263g) wt., or 15" (38cm) long, 10.9 oz. (309g) wt. #100-010-652EN 7" Carbine gen2 ss handguard, BLK, 2A128Q57 � � � � � � � � � � � � � � � � � � � $ 139.95 #100-011-893EN 7" Carbine gen2 ss handguard, FDE, 2A128A57 � � � � � � � � � � � � � � � � � � � 139.95 #100-010-653EN 9" Mid-Length gen2 ss handguard, BLK, 2A135C71� � � � � � � � � � � � � � � � � � � � 149.75 #100-011-895EN 9" Mid-Length gen2 ss handguard, FDE, 2A135Q71 � � � � � � � � � � � � � � � � � � � 149.75 #100-010-654EN 10" Carbine gen2 ss handguard, BLK, 2A142P86 � � � � � � � � � � � � � � � � � � � 156.00 #100-011-897EN 10" Carbine gen2 ss handguard, FDE, 2A142G86 � � � � � � � � � � � � � � � � � � � 156.00 #100-009-743EN 12" rifle gen2 ss handguard, BLK, 2A159B99 � � � � � � � � � � � � � � � � � � � 179.99 #100-011-899EN 12" rifle gen2 ss handguard, FDE, 2A157Q14 � � � � � � � � � � � � � � � � � � � 179.99 #100-009-744EN 15" rifle gen2 ss handguard, BLK, 2A169A99 � � � � � � � � � � � � � � � � � � � 189.99 #100-011-905EN 15" rifle gen2 ss handguard, FDE, 2A167H14 � � � � � � � � � � � � � � � � � � � 189.99
gEn2 ss sErIEs PanEL KIT - Panels protect the rails from impact, give you a textured surface for an enhanced grip, and protect your hand from heat and abrasion. Gives your rifle a clean, finished appearance, too. Kit consists Panel Kit, Black of two flat panels and one handstop panel. Installs easily; attachment hardware included. Fits gen II ss handguards only. SPECS: Molded polymer, black or Flat Dark Earth. 4" (10.1cm) long x 1" (2.5cm) wide. Handstop extends 3/4" (1.9cm) from panel surface. Panel Kit, FDE #100-012-535EN gen2 ss series Panel Kit, Black, 2A11C80 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 14.95 #100-012-536EN gen2 ss series Panel Kit, FDE, 2A11A80� � � � � � � � � � � � � � � � � � � � � � � � � � � � 14.95
Instructional video available at brownells.com
slim Profile, Fits Comfortably In The hand, Plenty Of accessory Options
Lightweight, slim-line 12" free-float handguard is machined from 6061 aluminum and hardcoat anodized for corrosion protection. Added vent holes along the upper rail allows for enhanced cooling. Handguard features an ergonomic design and is fully dehorned to ensure it has a non-abrasive, comfortable feel in your hand. Modular design includes three additional 2½" accessory rail sections, one with an anti-rotation QD socket. The full-length, T-marked MIL-STD 1913 top rail offers plenty of space for mounting accessories. Minor gunsmithing required for installation. a b SPECS: 6061 aluminum, hardcoat anodized, matte black. 12¾" (32.4cm) OAL. 1.5" (3.8cm) I.D. 1.75" (4.4cm) O.D. 12.4 oz. (351.5g) wt. Includes three accessory rail sections, barrel nut, nut wrench, bi-pod stud, and instructions. DPMS Low fits llater-model (after August 2009) LR-308s with flattop rail that extends .150" above receiver. DPMS High fits older LR-308 rifles with flattop rail that extends .210" above the top of the receiver. #100-011-912EN ar-308 ss handguard, Armalite AR10/Rock River, 2A171E21� � � � � � � � � $ 184.99 #100-011-914EN ar-308 ss handguard, DPMS Rifles/ Low, 2A171E21 � � � � � � � � � � � � � � � � � � � � 184.99 #100-011-913EN ar-308 ss handguard, DPMS Rifles/ High, 2A171K21 � � � � � � � � � � � � � � � � � � � 184.99
Enhances accuracy Potential & Optimizes Mounting & sling attachments
9" Mid-Length
Machined aluminum handguard is similar to original T-Series handguard, but with a slimmer profile, lighter weight and QD swivel sockets for easy sling attachment. Attaches directly to the upper receiver with included proprietary barrel nut and eliminates pressure points on the barrel that can compromise accuracy. MIL-STD 1913 rails are T-marked for accessory location and fully dehorned for a smooth, non-abrasive feel. Large vent holes keep weight down and provide plenty of air circulation to help cooling. Accommodates most gas piston systems, and includes barrel nut wrench, hardware and retaining compound. May not fit some rifles with permanently attached muzzle devices such as pinned or welded flash hiders. Minor gunsmithing required. a b SPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black finish. 2.1" (5.3cm) wide. 2.4" (6cm) high. Carbine – 7¼" (18.4cm) long, 9.3 oz. (263g) wt. 10" (25.4cm) long, 12 oz. (340g) wt. Mid-Length – 9¼" (23cm) long, 11.1 oz. (314g) wt. Rifle – 125/8" (32cm) long, 14.4 oz. (408) wt. 15" (38cm) long, 17.1 oz. (484g) wt. #100-011-185EN 7" Carbine gen 2 T-series handguard, 2A135L71 � � � � � � � � � � � � � $ 149.95 #100-011-186EN 9" Mid-Length gen 2 T-series handguard, 2A142K86 � � � � � � � � � � � � 159.95 #100-011-187EN 10" Carbine gen 2 T-series handguard, 2A150C00 � � � � � � � � � � � � 169.95 #100-011-188EN 12" rifle gen 2 T-series handguard, 2A164P29 � � � � � � � � � � � � � � � � � � � � � � � � 189.95 #100-011-189EN 15" rifle gen 2 T-series handguard, 2A178P58 � � � � � � � � � � � � � � � � � � � � � � � � 209.95
Lightweight Free-Float handguard Is Comfortable To handle & gas Piston Compatible
The Gen III Delta free-float forend has a triangular cross-section that makes it more comfortable to grasp than many conventional 4-rail handguards, with a flat bottom that’s ideal for shooting from a rest or sandbags. The Delta has the same carbon fiber construction as the standard Gen III to keep the weight down without sacrificing strength. Extra clearance inside, at the top, makes it compatible with most gas piston systems and conversions. An 81/2" top rail plus three user-configurable 31/2" rails side and bottom rails give plenty of room for mounting a bipod, light, and other accessories. Kit includes the forearm, barrel nut, bolt-on accessory rails, and complete installation instructions. a b SPECS: Tube – Carbon fiber, black finish. 121/2" long 21/8" wide, 21/4" high. Barrel Nut – Aluminum, hardcoat anodized, matte black. AR15/M16 fits standard mil-spec upper receiver. 16 oz. wt. AR-308 fits DPMS LR-308 and clones based on it. 1.2 lbs. wt. #714-000-021EN ar-15/M16 delta Forearm, 4A307Q60� � � � � � � � � � � � � � � � � � � � � � � � $ 339.00 #714-000-022EN ar-308 delta Forearm, 4A307I60 � � 339.00
ROCK RIVER ARMS AR-15/M16 NM FREE FLOAT BARREL SLEEVE
dCM Legal, a2-style relieves Barrel Tension For Better accuracy
Two-piece steel tube isolates barrel from forend pressure for consistent accuracy on target and tactical rifles. Lets you use a tight shooting sling or a bipod without putting external pressure on barrel and shifting point of impact. Furnished with A2 handguards, sling swivel and gas tube. DCM legal, does not alter exterior profile. a b SPECS: Steel, parkerized finish. High-temp injection-molded handguards, black. 13" (33cm) long. 16 oz. (454 g) weight. Fits AR 15 with 20" barrel. #739-000-003EN Free Float Barrel sleeve, 9C99N99� � � $ 99.99 designed For 3-gun Competition
Rugged, one-piece, free-float handguard system designed with flats on the bottom and sides to help stabilize the rifle when shooting from barricades or improvised rests such as those encountered in 3-gun or sniper competitions. Narrow, 2" wide body offers light weight and fits easily into the hand for better control and handling. Handguard includes a full-length top rail and two 2.5" rails that can be mounted anywhere along the sides or bottom with versatile T-nut mounting hardware. Six QD sling swivel sockets are built into the design for extra versatility. a b SPECS: 6061 T6 aluminum, hardcoat anodized matte black. 15" (38.1) long x 2" (5cm) wide x 21/16" (5.2cm) high. Mounting hardware and instructions included. Not suitable for gas piston systems. #100-011-237EN 15" Mod Quad rail, 8C215N13� � � � � � $ 234.99
SUREFIRE AR-15/M16/M4 M73 PICATINNY RAIL FOREND
Fast Tactical accessory Mounting; no gunsmithing required
Rugged, ultra-lightweight, interlocking-design forend provides a stable, no-move platform for fast mounting of all Picatinny rail tactical accessories without gunsmithing or permanent alterations. Replaces M4-length handguards on carbines with 16" barrels. Extruded from aluminum then CNC machined to final dimensions for a rock-solid fit, forend will not flex or shift so sights, optics and lasers hold their zeroes. Increased surface area helps dissipate heat. Forend features 16 mounting slots plus an additional extension for mounting a forward sling loop. Kit includes internal heat shields, three rail covers and #242 Locktite® necessary for correct installation. a b SPECS: Aluminum, hardcoat anodizing, matte black finish. 6.58" (16cm) long, 1.67" (4.2cm) wide. 9 oz. (255g) wt. #100-100-309EN surefire M73 Picatinny rail Forend, 2E00PHI� � � � � � � � � � � � � � � � � � � � � � � � � � $ 190.80
TROY INDUSTRIES AR-15/M16 BRAVO BATTLERAIL
One-Piece Free-Float railed handguard With Easy-On Mounting system
13" Rifle
Machined aluminum, onepiece rail system offers rigid- 11" Mid-length ity and built-in quick-detach sling receptacles. Easily mounts onto existing barrel nut with unique tri-clamp system and free-floats the barrel. Four MIL-STD 1913 Carbine Picatinny rails expand mounting options for optics and accessories, and top rail allows for monolithic upper rail when used with an A3 or A4 upper. Easy-to-see T-marks help you precisely place and replace optics and accessories. Four rows of vent holes help cooling. a b SPECS: 6061 T6 aluminum, hardcoat anodized, matte black finish. 2.4 (6cm) tall. 2.1 (5.3cm) wide. Mounting hardware and instructions included. sTOCK # LEngTh FITs PrICE #100-010-603EN 7.2" Carbine 3B155A00 $ 169.99 #100-010-605EN 11" Mid-Length 3B175G00 $ 189.99 #100-010-606EN 13" Rifle 3B185E00 $ 199.99
TROY INDUSTRIES AR-STYLE .308 LOW-PROFILE ALPHA RAIL
adds Tactical Versatility To Your ar-style .308
Sleek, low-profile, free floating handguard is specifically made for use on the more powerful AR-Style .308 platform. Machined from lightweight, aircraft grade aluminum, the onepiece handguard features a continuous top rail with T-marks for optics mounting. Fits DPMS low profile pattern rifles. Will not fit Armalite® AR-10®, Rock River Arms LAR-8, or DPMS Gen 2 LR-308. a b SPECS: 6061 T6 aluminum, mil-spec hardcoat anodized, matte black. 1.75" OD. Includes barrel nut, barrel nut wrench, 3 quick attach rails, directions, and mounting hardware. #100-014-763EN ar-308 alpha handguard, 7.2", 3B181B08 � � � � � � � � � � � � � � � � � � � � � � � � $ 195.00 #100-014-764EN ar-308 alpha handguard, 12", 3B199G65 � � � � � � � � � � � � � � � � � � � � � � � � 215.00 #100-014-765EN ar-308 alpha handguard, 13", 3B222P87 � � � � � � � � � � � � � � � � � � � � � � � � 240.00 #100-014-766EN ar-308 alpha handguard, 15", 3B237M59 � � � � � � � � � � � � � � � � � � � � � � � � 260.00
Easy-To-align Free-Float handguards With user Configurable Bolt-On accessory rails
Machined aluminum handguard offers a monolithic top rail when used with an A3 or A4 upper. Low-profile locking mechanism quickly attaches to your rifle’s existing barrel nut to free-float the barrel, while providing a stable accessory-mounting platform. Five rows of ventilation holes let heat escape, help minimize weight, and accept the three bolt-on rail sections included for mounting accessories exactly where you need them without a lot of unused rail real estate. Multiple quick-detach sling swivel receptacles give plenty of sling mounting options. White alphanumeric designators on the cross-slots ensure easy repeatability of accessory positions. a b SPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black or Flat Dark Earth (FDE). Mounting hardware and instructions included. Choose length below.
sTOCK # LEngTh COLOr PrICE #100-011-059EN 71/4 " Black 3B159P99 $ 159.99 #100-009-689EN 9" Black 3B160Q64 $ 169.99 #100-009-694EN 11" Black 3B169F93 $ 179.99 100-011-958EN 11" FDE 3B170M00 $ 183.99 #100-009-696EN 13" Black 3B179M99 $ 189.99 100-011-959EN 13" FDE 3B184J79 $ 199.00 #100-009-698EN 15" Black 3B187G38 $ 199.99 100-011-960EN 15" FDE 3B194I08 $ 209.00
YANKEE HILL MACHINE SLR SERIES FORENDS
Thinner Profile; gas Piston-Compatible
Totally-redesigned SLR (Slim, Light, Railed) series of free-floating handguards boast a much thinner side-to-side profile, (5/8" thinner) and extra clearance inside to accommodate most gas piston conversions. Extended top rail creates one continuous Picatinny rail the length of the receiver and handguard to provide extra room for sights, optics, and other accessories. The 4-Rail Handguard comes with Picatinny rails permanently mounted at 12, 3, 6, & 9 o’clock positions. The Smooth handguard has a built-in rail on top, and is drilled and tapped on the bottom and sides to accept YHM Customizable Forearm Rails, (available separately). Includes barrel nut, wrench, and complete instructions. a b SPECS: Aluminum, mil-spec hardcoat anodized matte black. Carbine – 7.3" length; Mid-Length – 9.29" length; Rifle – 12.58" length. Barrel nut, wrench, and instructions included. #100-011-738EN sLr Carbine 4-rail handguard, 9A155M60 � � � � � � � � � � � � � � � � � � � � � � � � $ 160.99 #100-011-741EN sLr Carbine smooth handguard, 9A131K03� � � � � � � � � � � � � � � � � � � � � � � � � 160.99 #100-011-769EN sLr Mid-Length 4-rail handguard, 9A155K10� � � � � � � � � � � � � � � � � � � � � � � � � 170.99 #100-011-770EN sLr Mid-Length smooth handguard, 9A155J20� � � � � � � � � � � � � � � � � � � � � � � � � 170.99 #100-011-771EN sLr rifle 4-rail handguard, 9A171L13 � � � � � � � � � � � � � � � � � � � � � � � � � 194.99 #100-011-772EN sLr rifle smooth handguard, 9A171B50� � � � � � � � � � � � � � � � � � � � � � � � � 194.99 Four-rails For Maximum accessory Mounting Versatility; Free-Float & non-Free-Float Models
Free-float handguard provides four U.S. MIL-STD 1913 Picatinny rails at 3, 6, 9, and 12 o’clock positions for mounting a wide variety of accessories. Top rail aligns with flattop receiver rail to provide an extra-long expanse of uninterrupted rail space without additional cantilever mounts that add complexity and weight to your gun. Two-piece design allows easy installation on original factory barrel nut without removing front sight; factory delta ring must be removed, or low- profile gas block installed. A robust clamp and four anti-rotation alignment bolts lock the forend to the rear of the barrel and actually reinforce the barrel/receiver connection. Large vent holes dissipate heat from the barrel and minimize weight. White alphanumeric identifiers on cross slots ensure easy repeatability of accessory positions when changing configuration from one mission to another. All models, except MRF-MX, have two receptacles on each side rail for 360° push-button sling swivels. Precision machined from high-grade aluminum billet, then Type III hardcoat anodized for strength and corrosion protection, with Teflon® additive for extra resistance to surface abrasion. MrF-C - 7" long, fits carbine-length gas system. MrF-CX – 12" long, extended rail fits carbine-length gas system and has opening for the gas block/front sight. MrF-M - 9" long, fits mid-length gas system and has clearance for factory front sight/ gas block and handguard cap. MrF-MX – 10" long, fits carbine- and mid-length gas system; requires low-profile gas block. Does not have sling swivel receptacles. MrF-rX – 13.5" long, fits anylength gas system; requires low-profile gas block. a b SPECS: Machined 6061 T6 aluminum, mil-spec Type III hardcoat anodized, available in Black or Dark Earth, matte finish. #100-003-453EN MrF-C 7" Forend, Blk, 3B160N48 � � � $ 169.99 #100-003-454EN MrF-C 7" Forend, Dark Earth, 3B168H48 � � � � � � � � � � � � � � � � � � � � � � � � 174.99 #100-003-458EN MrF-CX 12" Forend, Blk, 3B219H99� � 239.99 #100-003-456EN MrF-M 9" Forend, Dark Earth, 3B178H41 � � � � � � � � � � � � � � � � � � � � � � � � 192.99 #100-004-060EN MrF-MX 10" Forend, Blk, 3B189J99� � 199.99 #100-004-061EN MrF-MX 13.5" Forend, Blk, 3B225G31 � � � � � � � � � � � � � � � � � � � � � � � � 235.00
MrF-dI nOn-FrEE-FLOaT CarBInE handguard - Direct, drop-in replacement for factory plastic handguard provides the accessory mounting benefits of the free-float Modular Rail Forend without removal of the delta ring. Secure clamping design installs in minutes and gives a rock-solid mount for optics and other accessories. Four positions for 360° pushbutton sling swivels; numbered cross slots. Removable bottom rail allows installation on rifles equipped with M203 Grenade Launcher. SPECS: Machined 6061 T6 aluminum, mil-spec Type III hardcoat anodized, matte black finish. #100-003-459EN 7" standard MrF-dI, 3B133A59� � � � � �$ 139.99
SUREFIRE AR-15/M16 Z70 RAIL COVERS
Protects rails From dings & Your hand From abrasion
Durable, low-profile, soft-rubber covers easily snap onto the unused portion of a Picatinny handguard rail. Protects the integrity of the rail and the user’s hand from pointed edges while adding an extra layer of protection from a hot handguard. Low profile keeps bulk to a minimum. Simple, snap-on design allows for quick attach/detach without removing installed accessories. a b SPECS: Soft-rubber, black. 51/4" (13.5cm) long. 1" (2.5cm) wide. .35 oz.(10g) wt., each. Sold in 3-Pak. #100-008-906EN Z70 rail Covers, 3-Pak, 2E13I72 � � � � � $ 15.99
Fixed Or removable rail Models For Extreme Tactical duty
Lightweight, vented handguards allow the shooter to choose fixed, permanent Picatinny rails or easily removable ones for high-level customization. Precision machined from aircraft grade aluminum, then mil-spec hardcoat anodized for extra strength and superior abrasion resistance. a b
CusTOMIZaBLE FrEE-FLOaT TuBE - Versatile forearm system lets you choose exactly how much rail space you need to accommodate add-on, tactical accessories. Lightweight, aluminum, tube free-floats the barrel to eliminate shifts in bullet point-of-impact caused by sling or bipod tension on the handguard. Four, evenly spaced rows of threaded mounting holes accept Yankee Hill’s Pictainny-type, modular, Add-On Rails. One full-length rail and one 3" elevated rail included; additional rails available separately below. Front end is internally threaded to accept the ported, Yankee Hill End Cap. Included barrel nut features a slotted lock ring to allow proper indexing of added accessory rails. Lock ring is best tightened using the Yankee Hill Forearm Wrench. Choose from Carbine, specter, or rifle length tubes. Steel Bipod/sling stud screws directly into underside of handguard to provide a rocksolid mounting point for a Harris-style bipod. Also serves as an ultra-secure, heavy-duty sling swivel mount. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. Includes tube, full-length rail, 3" elevated rail, jam nut, and barrel nut. Carbine - 73/16" (18.3cm) long x 2" (5.1cm) dia. 9.5 oz. (269 g) wt. Accepts up to four 3", 4" or 7" rails. Specter - 95/8" (24.4cm) long x 2" dia. 12 oz. (340g). Covers gas block on a carbine-length gas system; low-profile gas block required. Accepts four 6", 7", or 91/4" rails or a combination of eight 3" and 4" rails. Rifle - 121/2" (31.8cm) long x 2" dia. 14.6 oz. (414 g) wt. Accepts up to four 7", 91/4" or 12" rails; eight 3" and 4" rails; four 6" rails and four 3" or 4" rails; four 7" rails and four 3" or 4" rails. Bipod/Sling Stud - 12L14 steel, black. Approximately 5/8" (15mm) OAL, threaded portion 1/4" (6mm) long. 10-32 thread. #100-002-078EN Carbine Customizable Tube, 9A98P50 � � � � � � � � � � � � � � � � � � � � � � � � � $ 119.00 #100-002-452EN specter Customizable Tube, 9A115K50� � � � � � � � � � � � � � � � � � � � � � � � � 130.30 #100-002-079EN rifle Customizable Tube, 9A135G50 � � � � � � � � � � � � � � � � � � � � � � � � 152.20 #100-005-267EN Bipod/sling stud, 9A1G29 � � � � � � � � � 1.99 “sMOOTh” FrEE FLOaT handguard - Lightweight, machined aluminum forearm combines the accessory mounting versatility of a quad-railed forearm with a “smooth,” un-railed area for support hand comfort to aid in enhanced weapon control. Integral, full-length Picatinny top rail, plus forward 2.5" rails on the sides and bottom, offer plenty of attachment space for lights, lasers, optics, backup sights, and other accessories. Modular design accepts a variety of bolt-on YHM accessories, available below. Smooth areas are drilled and tapped to accept Add-On Rails for additional accessory mounting options. Side and bottom rails have receptacles for Threaded Swivel Studs; also accepts YHM Forearm End Cap. YHM’s free-float attachment system eliminates accuracy compromising pressure on the barrel, while anti-rotation screws prevent the forearm from working loose even during rigorous tactical operations. Large ventilation slots allow plenty of air circulation to dissipate heat and keep the barrel cool. Carbine – Side and bottom rails extend around the front sight/gas block to get the accessories as far forward as possible and provide more grasping surface for the support hand. Cutout on top provides enough clearance to fold down a Yankee Hill flip-up front sight. rifle – Extends to just behind gas block and includes a forward attachment point for Threaded Swivel Stud on the top rail. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. Carbine – 91/4" (23.5cm) OAL, 21/2" (6.4cm) diameter. 12.4 oz. (352g) weight. Fits AR-15/M16 with carbine-length gas system. Rifle – 121/2" (31.8cm) OAL, 21/2" diameter. 16.6 oz. (471g) weight. Fits AR-15/M16 with rifle-length gas system. #100-004-309EN smooth Free Float Forearm, Carbine, 9A105P50 � � � � � � � � � � � � � � � $ 129.80 #100-004-310EN smooth Free Float Forearm, rifle, 9A125D50 � � � � � � � � � � � � � � � � � � � � � � � � 146.40
add-On raILs - Bolt-on Picatinny rails give you almost unlimited accessory mounting options for your Yankee Hill customizable handguards. Choose only as much rail as you need to avoid cluttering handguard with unused rail space. 6" rail is a full-length rail for Carbine-length handguards, 91/4" rail is the correct length for Specter tubes, and 12" rail is full-length for Rifle tubes. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. Fits Yankee Hill Customizable Free-Float and Two-Piece Handguards. Mounting screws included. #100-002-081EN 3" add-On rail, 9A14M10 � � � � � � � � � � � � $ 17.20 #100-002-082EN 4" add-On rail, 9A15J10� � � � � � � � � � � � � 18.50 #100-003-157EN 6" add-On rail, 9A18L15� � � � � � � � � � � � � 21.40 #100-002-083EN 7" add-On rail, 9A19F20 � � � � � � � � � � � � 22.70 #100-003-158EN 91/4" add-On rail, 9A22G00� � � � � � � � � � 26.40 #100-002-080EN 12" add-On rail, 9A25A50 � � � � � � � � � � � 31.70
dIaMOnd-PaTTErn FrEE-FLOaT handguard - Diamondshaped vents in a unique, latticework pattern give your weapon a distinctive look and provide superb airflow to prevent barrel from overheating. Helps keep your hand cool, too, while reducing weapon’s overall weight. Provides four, full-length Picatinny rails for maximum flexibility in mounting tactical accessories. Four, full-length Picatinny rails provide maximum flexibility in mounting tactical accessories. Machined from high-grade 6061 T6 aluminum and mil-spec hardcoat anodized to withstand combat and heavy-duty usage. Extended top rail gives a gap-free fit to receiver rail. Slots are marked alphanumerically to help identify accessory locations. Threaded front end accepts Yankee Hill screw-in end cap, available separately. Comes with jam nut, barrel nut and antirotation screws to ensure handguard stays locked in place. SPECS: 6061 T6 aluminum, mil-spec hardcoat anodized, matte black. Carbine – 71/4" (23.5cm) OAL, 21/2" (6.4cm) dia. 12.5 oz. (354g) weight. Fits AR-15/M16 with carbine-length gas system. Mid-Length – 91/4" (23.5cm) OAL, 21/2" dia. 15.2 oz. (431g) wt. Fits AR-15/M16 with mid-length gas system. Specter – 93/4" (24.8cm) OAL, 21/2" dia. 16.1 oz. (456g) wt. Fits AR-15/ M16 with carbine-length gas system and covers gas block when installed. Rifle – 121/2" (31.8cm) OAL, 21/2" dia. 16.6 oz. (471g) wt. Fits AR-15/M16 with rifle-length gas system. #100-004-311EN diamond series handguard, Carbine, 9A109A99� � � � � � � � � � � � � � � � $ 122.70 #100-004-312EN diamond series handguard, Mid-Length, 9A98N57 � � � � � � � � � � � � � 129.80 #100-004-313EN diamond series handguard, Specter, 9A105I50� � � � � � � � � � � � � � � � � 129.80 #100-004-314EN diamond series handguard, Rifle, 9A135L50 � � � � � � � � � � � � � � � � � � � 160.70
2-PIECE handguard - Tough, 2-piece, forearm uses your existing delta ring, so it’s easy to replace the standard issue, mil-spec handguard with a strong, lightweight aluminum version. Four, fixed, Picatinny rails provide a solid mounting platform for backup sights, lasers, tactical lights, vertical grips and more. Oversize cooling ports prevent heat buildup and allow clear view of the barrel section underneath for a radical, tactical look. Bottom panel removes easily to provide clearance for grenade and flare launchers if needed. Drilled and tapped in four locations to accept the Yankee Hill Threaded Swivel Stud. Use Colts Carbine model on Colt-manufactured guns. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. Carbine - 65/8" (16.8cm) long x 23/8" (6cm) wide. 9.9 oz. (281 g) wt. Colt Carbine The Correct Parts For all Yankee hill Free-Float Forearms
Original factory parts to replace damaged or lost pieces for your Yankee Hill free-float forearm. Barrel nut is compatible with any standard AR-15 or M16 receiver. Both parts are designed to work with Yankee Hill forearms only. a b SPECS: Barrel Nut – aluminum, hardcoat anodized, matte black. Jam Nut – steel, black oxide finish. Fit Yankee Hill free-float forearms only. #100-009-657EN YhM-9483 Barrel nut, 9A25E50� � � � � � $ 31.70 #100-009-658EN YhM-9433 Jam nut, 9A11I20 � � � � � � � � 14.30
model fits Colt-manufactured guns only. Standard Carbine model fits carbines made by most other manufacturers. Rifle - 12" (30.5cm) long x 23/8" wide. 20 oz. (567 g) wt. #100-002-093EN Carbine 2-Pc handguard, 9A115Q50 � � � � � � � � � � � � � � � � � � � � � � � � $ 138.30 #100-003-122EN Colt Carbine 2-Pc handguard, 9A115H50 � � � � � � � � � � � � � � � � � � � � � � � � 138.30 #100-002-096EN rifle 2-Pc handguard, 9A155G50� � � 181.80
TaCTICaL sWIVEL MOunTs - Steel, swivel stud features a full, 360 degrees of rotation to allow your tactical sling to follow the movements of your body, not just the rifle. Virtually eliminates sling tangle. Accepts standard, quick-detach type swivels. Threaded swivel stud is a 5/16"-32 tpi pivoting stud. Fits Yankee Hill drilled and tapped handguards. Add-on to other applications with at least 1/4" depth clearance. dovetail sling Mount - Threaded Swivel Stud (above), combined with an aluminum dovetail clamp and steel cross-bolt. Secures directly to any Picatinny or Weaver-style rail. SPECS: Threaded Swivel Stud - Steel, blued finish. 5/16"-32 tpi. Approx. 3/4" (1.9cm) OAL, requires 1/4" (6.4mm) depth clearance for drill/tap applications. Dovetail Sling Mount - Steel stud, blued; aluminum clamp, matte black mil-spec hardcoat finish. Approx. 11/4" (3.2cm) wide x 11/4" high. #100-002-084EN Threaded swivel stud, 9A4N17 � � � � � � � � $ 5.10 #100-002-087EN dovetail sling Mount, 9A19C89 � � � � � � � 22.99
FOrEarM End CaP - Screws into the front of any Yankee Hill free-float handguard to provide added protection for the end of the forearm. Hides view of the barrel from the front of the handguard for a clean, finished look, and keeps large debris out. Cooling ports allow rapid escape of barrel heat and promote airflow under the handguard. Available with 15/16" or 11/16" inside diameter. Install using supplied threadlocker. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. 15/16" (2.4cm) I.D. or 11/16" (2.7cm) I.D. #100-002-897EN ar-15 Forearm End Cap 15/16" Id, 9A14D50 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 18.50 #100-002-086EN 11/16" I.d. End Cap, 9A14D50 � � � � � � � � � � 18.50
FOrEarM WrEnCh - Heavy, steel, spanner wrench makes it easy to tighten handguard barrel nuts to the correct torque. Notched end engages the indexing ring on Yankee Hill handguards and others with similar, slotted indexing rings for aligning the accessory rails. SPECS: Steel, black oxide finish. 8" (20.3cm) long, 2" (5.1cm) wide, 1/4" (6.4mm) thick. #100-002-090EN Forearm Wrench, 9A22D10 � � � � � � � � � $ 28.30 snap-On, non-slip gripping surface Improves Weapon Control, Protects rails & hands
Molded polymer covers snap over exposed portions of accessory rails to form a positive gripping surface for a comfortable, non-slip hand hold and improved weapon control. Protects your hands from the exposed rail edges and provides a soft cushion to help prevent damage to the rails during storage or transport. Available in a variety of styles to suit the requirements of different shooters and weapon configurations. Modular designs allow you to customize coverage area and configuration, even mix and match styles on the same handguard. a b LOWPrO raIL guard - Low-profile, flexible polymer guard snaps neatly into the cross-slots on Picatinny rails. SPECS: Synthetic rubber polymer, black or O.D. green. 67/8" (17.5cm) long x 1" (2.5cm) wide. #573-000-028EN LowPro rail guard, Black, 3G9M05 � � � �$ 9.99 #573-000-029EN LowPro rail guard, O.D. Green, 3G9K05 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9.99 FuLL raIL COVEr - Completely covers the rail and contoured to give a rounded shape to Picatinny rails. Grippy synthetic rubber snaps securely over rail and a diamond-plate texture provides an excellent grasping surface. SPECS: Synthetic rubber polymer, black. 53/4" (14.6cm) long x 11/2" (3.8cm) wide. #573-000-031EN Full rail Cover, Black, 3G11Q61� � � � � � $ 16.99
MAGPUL LADDER RAIL PANEL
Press Into Empty Cross slots For Enhanced grip & rail Protection
Flexible ladder-style panel snaps securely into unused cross slots on Picatinny rails, protecting against dirt and dings and improving grip and weapon control. Prevents sharp rail edges from digging into your hand, snagging on clothing, and causing damage to gear, like cut and frayed slings or repelling ropes. Made of rubbery, slip-resistant Santoprene™ thermoplastic elastomer, the ultra-low-profile design keeps your handguard diameter slim. Covers 18 slots or can easily be trimmed to custom lengths and fitted between mounted accessories. To remove, simply pry up a corner and peel off. Manufactured by Falcon Industries. a b SPECS: Santoprene rubber. 615/16" (17.6cm) long. Fits one side of standard carbine-length 1913 Picatinny rail. #100-015-128EN Ladder rail Panel, Black, 3K9Q42� � � � �$ 11.35 #100-015-129EN Ladder rail Panel, O.D. Green, 3K9I42 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11.35 #100-015-130EN Ladder rail Panel, Flat Dark Earth, 3K9F42� � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11.35
TROY INDUSTRIES AR-15/M16 SQUID GRIP RAIL COVERS
Improves Your hold On a Troy Modular railed handguard
Heat-resistant rubber rail covers quickly snap into the circular cooling holes on Troy modular rail-and-chassis systems to provide you with a extra-comfortable, greatly improved grip while keeping added bulk to an absolute minimum. Each cover fills 6 holes and may be cut down to shorter lengths or installed end-to-end for longer lengths. a b SPECS: Heat-resistant rubber, black. One strip measures 4.5" (11.4cm) long. Fits Troy TRX-Extreme, Alpha, and Delta rails. 7 strips per pak. #100-010-793EN squid grip rail Covers, 7-Pak, 3B22G71 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 25.49
