MIDWEST INDUSTRIES AR-15/M16
AR-15/m16
SS M-LOK HANDGUARD Increases Your Accessory Mounting Versatility Extremely lightweight, free floating handguard incorporates Magpul’s M-LOK attachment system that allows users to add accessory rail sections only where needed. Super slim handguard has a 1.5" outside diameter while the dehorned, non-abrasive finish feels smooth and comfortable in the hand. Handguard has five, antirotational QD sling swivel sockets plus a 1913 Picatinny T-marked top rail for easy positioning optics and accessories. Includes proprietary barrel nut, barrel nut wrench, and one five slot Magpul M-LOK rail section. a b SPECS: 6061 aluminum, hardcoat anodized, black. 1.5" (3.8cm) outside dia. 1.3" (3.3cm) inside dia. Includes proprietary barrel nut, barrel nut wrench, and a five slot Magpul M-LOK rail section. Carbine - 9" (22.8cm) OAL, 7.2 oz. (204.1g) wt. Mid-Length - 10.5" (26.7cm), 7.8 oz. (221.1g) wt. Rifle - 12" (30.5cm) OAL, 8.7 oz. (246.6g) wt. or 15" (38.1cm) OAL, 10.1 oz. (286.3g). #100-016-958EN 9" SS M-Lok HG, 2A139I29 ������������������ $ 149.95 #100-016-959EN 10" SS M-Lok HG, 2A148P58 �������������� 159.95 #100-016-960EN 12" SS M-Lok HG, 2A157H15 �������������� 179.95 #100-016-961EN 15" SS M-Lok HG, 2A178E58 �������������� 189.95
MIDWEST INDUSTRIES AR-15/M16
GEN II SS SERIES KEYMOD HANDGUARD
handguards
Super Slim, Ergonomic Design Lightweight free float, handguard features a bolt-on KeyMod rail that let you mount accessories exactly where you need them without the weight and bulk of unused rail space. Full-length T-marked MIL-STD 1913 Picatinny top rail fits flush against the upper receiver, creating a monolithic expanse of rail for easy mounting of long-eye-relief optics. Fully dehorned handguard is easy on the hands, while the exceptionally narrow 1½" outside diameter is easy to grip and fits securely in your hand. Five limited rotation QD swivel points, two in the rear and two in the front, plus a forward one on the bottom, provide multiple sling mounting options. Proprietary barrel nut, barrel nut wrench, and one 2.1" keymod rail section are included. Some minor gunsmithing is required for installation. Additional 2.1" (5 cross-slots) and 3.75" (9 cross-slots) KeyMod rails sold separately. a b SPECS: Machined 6061 aluminum, Type III hardcoat anodized, matte black (BLK) or flat dark earth (FDE). 11/2" (3.8cm) O.D. Includes proprietary barrel nut, barrel nut wrench, and one KeyMod rail section. Carbine - 10" (25.4cm) long. 7.7 oz. (218.3g) wt. Mid-Length - 12" (30.5cm) long. 8.5 oz. (241g) wt. Rifle - 15" (38.1cm) long. 9.9 oz. (280.7g) wt. #100-014-281EN 10" Carbine SS KeyMod Handguard, BLK, 2A160J00 ��������������������������������������� $ 174.95 #100-014-283EN 10" Carbine SS KeyMod Handguard, FDE, 2A160P00 ��������������������������������������� 174.95 #100-013-998EN 12" Mid-Length SS KeyMod Handguard, BLK, 2A171L43 ������������������� 199.95 #100-014-284EN 12" Mid-Length SS KeyMod Handguard, FDE, 2A171D43 ����������������� 199.95 #100-014-282EN 15" Rifle SS KeyMod Handguard, BLK, 2A192M86 ������������������������������������������������� 219.95 #100-014-285EN 15" Rifle SS KeyMod Handguard, FDE, 2A192J86 �������������������������������������������������� 219.95 #100-014-342EN 2.1" KeyMod 5-Slot Rail, 2A17E86 ������� 18.99 #100-014-345EN 3.75" KeyMod 9-Slot Rail, 2A21N79 ��� 23.99
52
PAGE
MIDWEST INDUSTRIES AR-15/M16
SS SERIES FREE-FLOAT HANDGUARDS
MIDWEST INDUSTRIES AR-15/M16
MIDWEST INDUSTRIES AR-STYLE .308
GEN2 SS-SERIES FREE-FLOAT HANDGUARD
SS SERIES FREE-FLOAT HANDGUARD
Ultra-Light, Clutter-Free Design With Modular Rails For Tactical Versatility Free-float handguard of lightweight yet rugged machined aluminum has a full-length MIL-STD 1913 Picatinny top rail and two, modular bolt-on rails for mounting tactical accessories exactly where you need them. Cuts down on weight and clutter by eliminating unused rail space. Plenty of large vent holes help air circulation to cool barrel, and also serve as mounting holes for the modular rails using the included hardware. Top rail mates with receiver rail without a gap for a monolithic look, and is T-marked with white numbering for ease in removing and remounting a scope or red dot sight without loss of zero. Generous internal clearance accommodates gas piston systems from CMMG, Osprey Defense, and Ares Defense (won’t fit Adams Arms). Accepts Midwest Industries T- and P-Series Trim Rings, available separately. a b SPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black. Steel jam ring, matte black. Handguard – 2" (5cm) wide without attachments, 21/4" (5.7cm) high from bottom to top of rail. Includes 2" (5cm) and 4" (10.1cm) rails, mounting hardware, and instructions. Carbine – 7" (17.8cm) long. Mid-Length – 9" (22.9cm) long. Rifle – Available in 12" (30.5cm) and 15" (38.1cm) lengths. #100-005-332EN 7" Carbine SS HG, 2A125P00 �������������� $ 139.99 #100-005-333EN 9" Mid-Length SS HG, 2A129K00 ������ 154.99 #100-005-334EN 12" Rifle SS HG, 2A150B00 ������������������ 164.99 #100-005-335EN 15" Rifle SS HG, 2A164C29 ������������������ 179.99 SS SERIES HANDGUARD SLING ADAPTER Bolt-on hardware lets you maximize accessory mounting options while adding minimal weight and bulk. Heavy duty, quick-detach sling swivel accepts slings up to 11/4" wide, and limits travel to prevent sling wrapping while still allowing necessary movement. SPECS: Base - Machined 6061 T6 aluminum, hardcoat anodized, matte black. Fits SS Series handguards only. Mounting hardware included. Swivel - Steel loop, black oxide finish. Accepts slings up to 11/4" (3.2cm) wide. Base is 21/4" (5.7cm) long x 5 /8" (1.6cm) wide. 1.5 oz. (43g) wt. 100-005-701EN SS Sling Adapter, 2A28D59 ������������������ $ 31.99
PRECISION REFLEX AR-15/M16/AR-STYLE .308
GEN III CARBON FIBER FOREARM Improves Handling & Reduces Heat Buildup Tubular free-float forearm is made of lightweight, high-strength carbon fiber to reduce heat transfer to the shooter’s hand during sustained fire and provide excellent handling characteristics. Precisionmade, aluminum barrel nut rigidly clamps the forearm to the upper receiver. Generous porting on enhances heat transfer while reducing weight even more. Ported/Railed fits rifle-length AR-15/M16 gas system and provides 28 cooling ports, three 31/2" Picatinny rails that can be repositioned for specific needs, and an 81/2" top rail. DPMS 308 is designed specifically for DPMS-pattern AR-style .308 rifles and includes four Picatinny rails. a b SPECS: Tube – Carbon fiber, natural black/silver finish.2" (5cm) O.D. Barrel nut – Aluminum, hard-anodized, matte black. Rifle – 121/2" (31.8cm) long. Mid-Length – 91/8" (23.2cm) long. DPMS 308 – 143/4" (37.5cm) long. Fits DPMS LR-308 and rifles patterned after it. #714-000-011EN Gen III Forearm, Ported/Rails, 4A310J81 �������������������������������������������������� $ 319.99 #714-000-023EN GEN III Forearm, DPMS 308, 4A326N90 ������������������������������������������������ 345.00
Ultra-Slim Profile Helps Keep Rifle Light & Maneuverable Machined aluminum free-float handguard offers many of the same features as the original SS Series handguards, with less weight and a slimmer profile. Only 11/2" wide, the Gen2 models include a bipod stud and three bolt-on 21/2" rail sections, one with a built-in anti-rotation QD socket, that can be mounted anywhere. MIL-STD 1913 top rail offers T-marks for mounting points, and gives a neat, monolithic look with your flattop upper. Included barrel nut and barrel nut wrench enable easy mounting. Accepts Gen2 SS-Series accessories only, not original SS-Series accessories. 7" Carbine and 9" Mid-Length models leave the gas block exposed. 10" Carbine, 12" and 15" Rifle models require low-profile gas blocks. a b SPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black (BLK) or flat dark earth (FDE). 11/2" (3.8cm) O.D. Includes proprietary barrel nut and wrench and instructions. Gunsmith installation recommended; will not fit most piston systems. Carbine – 7" (17cm) long, 7.1 oz. (201g) wt., or 10" (25cm) long, 8.6 oz. (243g) wt. Mid-Length – 9" (30cm) long. 8.3 oz. (235g) wt. Rifle – 12" (30cm) long, 9.3 oz. (263g) wt., or 15" (38cm) long, 10.9 oz. (309g) wt. #100-010-652EN 7" Carbine Gen2 SS Handguard, BLK, 2A128Q57 �������������������������������������� $ 139.95 #100-011-893EN 7" Carbine Gen2 SS Handguard, FDE, 2A128A57 �������������������������������������� 139.95 #100-010-653EN 9" Mid-Length Gen2 SS Handguard, BLK, 2A135C71 ���������������������������������������� 149.75 #100-011-895EN 9" Mid-Length Gen2 SS Handguard, FDE, 2A135Q71 �������������������������������������� 149.75 #100-010-654EN 10" Carbine Gen2 SS Handguard, BLK, 2A142P86 �������������������������������������� 156.00 #100-011-897EN 10" Carbine Gen2 SS Handguard, FDE, 2A142G86 �������������������������������������� 156.00 #100-009-743EN 12" Rifle Gen2 SS Handguard, BLK, 2A159B99 �������������������������������������� 179.99 #100-011-899EN 12" Rifle Gen2 SS Handguard, FDE, 2A157Q14 �������������������������������������� 179.99 #100-009-744EN 15" Rifle Gen2 SS Handguard, BLK, 2A169A99 �������������������������������������� 189.99 #100-011-905EN 15" Rifle Gen2 SS Handguard, FDE, 2A167H14 �������������������������������������� 189.99 GEN2 SS SERIES PANEL KIT - Panels protect the rails from impact, give you a textured surface for an enhanced grip, and protect your hand from heat and abrasion. Gives your rifle a clean, finished appearance, too. Kit consists Panel Kit, Black of two flat panels and one handstop panel. Installs easily; attachment hardware included. Fits Gen II SS handguards only. SPECS: Molded polymer, black or Flat Dark Earth. 4" (10.1cm) long x 1" (2.5cm) wide. Handstop extends 3/4" (1.9cm) from Panel Kit, FDE panel surface. #100-012-535EN Gen2 SS Series Panel Kit, Black, 2A11C80 �����������������������������������������������������$ 14.95 #100-012-536EN Gen2 SS Series Panel Kit, FDE, 2A11A80 ������������������������������������������������������� 14.95
Instructional video available at brownells.com
SATISFACTION GUARANTEED
SINCE 1939
Slim Profile, Fits Comfortably In The Hand, Plenty Of Accessory Options Lightweight, slim-line 12" free-float handguard is machined from 6061 aluminum and hardcoat anodized for corrosion protection. Added vent holes along the upper rail allows for enhanced cooling. Handguard features an ergonomic design and is fully dehorned to ensure it has a non-abrasive, comfortable feel in your hand. Modular design includes three additional 2½" accessory rail sections, one with an anti-rotation QD socket. The full-length, T-marked MIL-STD 1913 top rail offers plenty of space for mounting accessories. Minor gunsmithing required for installation. a b SPECS: 6061 aluminum, hardcoat anodized, matte black. 12¾" (32.4cm) OAL. 1.5" (3.8cm) I.D. 1.75" (4.4cm) O.D. 12.4 oz. (351.5g) wt. Includes three accessory rail sections, barrel nut, nut wrench, bi-pod stud, and instructions. DPMS Low fits llater-model (after August 2009) LR-308s with flattop rail that extends .150" above receiver. DPMS High fits older LR-308 rifles with flattop rail that extends .210" above the top of the receiver. #100-011-912EN AR-308 SS Handguard, Armalite AR10/Rock River, 2A171E21 ������������������ $ 184.99 #100-011-914EN AR-308 SS Handguard, DPMS Rifles/ Low, 2A171E21 ���������������������������������������� 184.99 #100-011-913EN AR-308 SS Handguard, DPMS Rifles/ High, 2A171K21 �������������������������������������� 184.99
MIDWEST INDUSTRIES AR-16/M16
GEN 2 T-SERIES FREE-FLOAT HANDGUARD
Enhances Accuracy Potential & Optimizes Mounting & Sling Attachments
15" Rifle
9" Mid-Length
Machined aluminum handguard is similar to original T-Series handguard, but with a slimmer profile, 7" Carbine lighter weight and QD swivel sockets for easy sling attachment. Attaches directly to the upper receiver with included proprietary barrel nut and eliminates pressure points on the barrel that can compromise accuracy. MIL-STD 1913 rails are T-marked for accessory location and fully dehorned for a smooth, non-abrasive feel. Large vent holes keep weight down and provide plenty of air circulation to help cooling. Accommodates most gas piston systems, and includes barrel nut wrench, hardware and retaining compound. May not fit some rifles with permanently attached muzzle devices such as pinned or welded b flash hiders. Minor gunsmithing required. a SPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black finish. 2.1" (5.3cm) wide. 2.4" (6cm) high. Carbine – 7¼" (18.4cm) long, 9.3 oz. (263g) wt. 10" (25.4cm) long, 12 oz. (340g) wt. Mid-Length – 9¼" (23cm) long, 11.1 oz. (314g) wt. Rifle – 125/8" (32cm) long, 14.4 oz. (408) wt. 15" (38cm) long, 17.1 oz. (484g) wt. #100-011-185EN 7" Carbine Gen 2 T-Series Handguard, 2A135L71 �������������������������� $ 149.95 #100-011-186EN 9" Mid-Length Gen 2 T-Series Handguard, 2A142K86 ������������������������ 159.95 #100-011-187EN 10" Carbine Gen 2 T-Series Handguard, 2A150C00 ������������������������ 169.95 #100-011-188EN 12" Rifle Gen 2 T-Series Handguard, 2A164P29 ������������������������������������������������ 189.95 #100-011-189EN 15" Rifle Gen 2 T-Series Handguard, 2A178P58 ������������������������������������������������ 209.95
Office/Tech: 641-623-5401
