11 minute read
J #100-013-592eN HiperFire HiperTOucH 24 eLiTe TriGGer See
TRIGGER SYSTEM
Advertisement
smooth, even trigger pull, precise Letoff; easy installation
Easy-to-fit replacement for factory trigger is fully adjustable for engagement and overtravel, and can be set with a pull weight as light as 3.5 lbs. Lets you upgrade an AR-15 or an AR-style .308 rifle that uses an AR-15 trigger, while keeping your current hammer and pins. Redesigned sear geometry and advanced metallurgy result in a precision-ground sear edge that delivers a precise, consistent letoff and prevents the kind of wear that causes doubling and other problems. Extremely short reset enables fast follow-up shots, a critical advantage on tactical and competition rifles. Installs in minutes with no permanent alterations to the rifle. Disconnector spring, engagement screw, and over-travel screw are already installed; also includes disconnector, trigger return spring, and two hammer springs, and .050" hex key. Use with JPSH-1A Speed Hammer (sold separately) for best performance. Comes with a competition (yellow) hammer spring, for a trigger pull of between 3 and 3.5 lbs.—for competition and recreational shooting—plus a “tactical” spring (red) that gives a 3.5 to 4 lb. for applications demanding a high level of ignition reliability, including police/military use, mil-spec ammunition with hard primers, and in AR-style .308 rifles. a b SPECS: Steel, Parkerized finish. Fits rifles with .154" (military and current aftermarket) diameter trigger pins. Measure your pins before ordering. Includes complete instructions and a CD-ROM with 35-minute video showing step-by-step installation. #452-015-000EN JpFC-1 adj. trigger kit, .154" Pins, 2E104N20 � � � � � � � � � � � � � � � � � � � � � � � � �$ 113.99 #452-015-100EN .154" speed Hammer, 2E51C43� � � � � � 56.99
JpFC1-eZ trigger™ sYsteM - Complete trigger system installs in five minutes without fitting or modification of parts on the trigger or your receiver. All adjustments are made with setscrews, eliminating the risk of ruining the trigger due to errors in fitting. Includes the JP Speed Hammer for fast lock time, plus “anti-walk” pins with button head cap screws for easy removal and reinstallation of the trigger system. Overtravel adjustment screw lets you set your trigger for a clean, crisp, single-stage release. Comes with two hammer springs: install the yellow spring to get a 3 to 31/2 lb. pull for competition or recreational shooting with non-military ammunition. The red spring gives a 31/2 to 4 lb. pull and more hammer force for use with the harder primers found on military (5.56mm NATO) ammo and for law enforcement duty use. The red spring should be used in any installation on an AR-style .308 rifle. For a heavier, 41/2 lb. pull for tactical applications or NRA Service Rifle competition, install the JPS4.5 spring kit (available below). SPECS: Steel, black oxide finish. Fits rifles with .154" dia. (military and current commercial rifles) hammer and trigger pin holes. Measure your pins before ordering. NOTE: Will not fit Colt rifles with pinned-in fullauto sear block. Kit includes trigger, hammer, disconnector/sear trigger spring, yellow hammer spring, red hammer spring, safety assembly, (2) anti-walk pins, disconnector spring, instructions, and DVD with video showing step-by-step installation. #452-000-120EN JpFCp-1eZ trigger kit, .154" Pins, 2E171G43� � � � � � � � � � � � � � � � � � � � � � � � � $ 189.99
Jps4.5 serViCe riFLe spring kit - Replacement spring for the JP Adjustable Trigger Kit lets Service Rifle, law enforcement and tactical shooters achieve a clean-breaking, 4.5 lb. trigger when used with JP components. Can also be used with factory or aftermarket triggers and hammers to improve felt trigger pull. SPECS: High tensile strength steel spring wire. Includes (1) hammer and (1) trigger spring. #452-000-015EN Jps4.5 spring kit, 2E10F11 � � � � � � � � � � $ 10.99 gives a Lighter trigger pull With increased Hammer energy
Single-stage trigger offers shorter pretravel, faster reset, and increased hammer energy. Dual coil springs across the top of the trigger to reduce friction on the sear and increase hammer striking power by 35% over factory trigger. Includes interchangeable color-coded springs to adjust pull weight from 21/2 to 41/2 lbs. 24 elite is designed for law enforcement, military, and precision shooters. 24 Competition is ideal for competitive shooters and features further reduced pre-travel and a straight trigger with an adjustable finger pad. Pad can be set at five different positions for enhanced adjustment of pre-travel and trigger weight. Can be installed with or without the pad. 24 3gun is similar to Competition but with a traditional curved trigger shoe - same trigger pull with virtually no creep. Excellent for Designated Marksman rifles, LE use, and of course 3-gun competition. eDt is designed for duty, NRA long-range competition, hunting, and personal defense. With a 41/2 to 51/2 lb. pull, a “hint”’ of creep, and a positive, clean break, the EDT offers 25-50% faster lock time than factory trigger, while still delivering full mil-spec hammer strike energy. a b SPECS: Frame/Trigger/Hammer/Disconnector - Carbon steel alloy. Mate black finish. Springs – steel. Pins/Spindle/Toggle Shaft - Carbon steel alloy. Mate black finish. Fits rifles with .154" hammer/trigger pins. Can be installed on AR-style .308 rifle that accepts a standard small-pin AR-15 trigger. #100-013-592EN Hipertouch 24 elite, 3D207N00 � � � � $ 215.00 #100-013-593EN Hipertouch 24 Competition, 3D218H56 � � � � � � � � � � � � � � � � � � � � � � � � 235.00 100-016-835EN Hipertouch 24 3gun, 3D208N92 � � � 225.00 100-016-843EN Hipertouch eDt, 3D82E64� � � � � � � � � 89.00
JP ENTERPRISES AR-15 SPEED HAMMER
Faster ignition; Cleaner pull
Low-mass hammer delivers a 50% shorter lock time than the standard factory hammer for faster ignition and improved accuracy potential. Designed to work with – and enhance the performance of – the JP Enterprises adjustable trigger kit (available separately). Not for use with the standard factory trigger group. a b SPECS: A2 tool steel, hardened to Rc 58, Parkerized finish, contact surfaces in-the-white. .7 oz (20g) wt. Fits rifles with the .154" dia. (military and current aftermarket) hammer pins. #452-015-100EN .154" speed Hammer, 2E51C43� � � � � � $ 56.99
J & L RESEARCH AR-15 DROP-IN TRIGGER ADJUSTER
improves the Factory trigger
Trigger adjuster replaces the factory grip screw to reduce trigger creep, lessen pull weight, and improve hammer break for better accuracy. Use alone or as part of a complete trigger job. a b SPECS: Stainless steel. Gunsmith installation recommended. #072-000-001EN trigger adjuster, 2G34K90� � � � � � � � � � $ 44.20 obtain a super-smooth pull & Crisp Letoff in Minutes
Self-contained module is ready to install in your small-pin AR and deliver an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels more like a traditional bolt action than a combat rifle trigger. 100% dropin—no gunsmithing, fitting, or adjusting required. All components are captive in the lightweight, aluminum alloy housing. Hammer is wire-EDM machined from S7 tool steel that combines hardness to resist wear with superior impact resistance to withstand heavy use without chipping or breaking. Other components are EDM cut from A2 tool steel, then heat treated to Rc 56-60 for long service life. Precision-ground engagement surfaces ensure superb reliability and a crisp, clean hammer release. Installs using your rifle’s original hammer/trigger pins; proprietary design eliminates pin walkout. Available with standard solid trigger shoe, or a distinctivelooking, lighter-weight skeletonized shoe, both with choice of 3 lb., 4 lb. or 4.5 lb. pull weight. ar-308 model has a factory-set 4 lb. pull weight, a solid shoe, and more hammer mass to ensure positive ignition of harder .308/7.62mm primers. a b SPECS: Hammer – S7 tool steel, natural color, Teflon-Nickel coated. Trigger/Internal Components - Hardened A2 tool steel, black oxide finish. Housing – 6061 T6 aluminum, gold anodized finish. Fits rifles with .154" diameter hammer/trigger pin holes. Will not fit Colt-manufactured AR15s with sear block.
stoCk # sHoe tYpe
puLL WeigHt priCe
#883-000-024EN Solid #883-000-041EN Solid
3 lb. 3H212G41 $ 224.99 4 lb. 3H212J41 $ 224.99 #883-000-042EN Solid 4.5 lb. 3H212I41 $ 224.99 #883-000-026EN Skeleton 3 lb. 3H270N36 $ 289.99 #883-000-036EN Skeleton 4 lb. 3H270J36 $ 289.99 #883-000-037EN Skeleton 4.5 lb. 3H270J36 $ 289.99 #883-000-023EN AR-308 Solid 4 lb. 3H240D00 $ 244.99
WMD GUNS AR-15/AR-STYLE .308 NIB-X™ COATED FIRE CONTROL COMPONENTS
ultra-Hard, ultra-slick Finish gives smooth, reliable performance
These precision-machined components are coated with WMD’s ultra-tough NiB-X nickel boron finish for superior durability, corrosion resistance, and exceptionally smooth metal-on-metal contact. The coating allows the parts to function under extreme conditions with little or no lubrication, and gives carbon fouling nothing to adhere to, so cleanup is much easier than with ordinary finishes. Allows longer intervals between cleaning without loss of weapon performance. Components are available as a set or separately. a b SPECS: Steel with nickel boron silver finish. Hammer, disconnector, and trigger fit small-pin (.154") AR-15 lower receivers only. #100-010-746EN niB-X Hammer/trigger/Disconnect set, 3C47Q59 � � � � � � � � � � � � � � � � � � � � � $ 49.99 #100-010-178EN niB-X ar-15 Hammer, only, 3C20I89� � � � � � � � � � � � � � � � � � � � � � � � � � � 21.99 #100-009-997EN niB-X ar-15 trigger, only, 3C20E00 � � � � � � � � � � � � � � � � � � � � � � � � � � 20.99 #100-009-990EN niB-X ar-15 Disconnector, only, 3C8L97� � � � � � � � � � � � � � � � � � � � � � � � � � � � 9.99 Match-grade pull From a rugged, reliable Drop-in Module
Drop-in trigger module fits any milspec small-pin AR-15 and delivers a light, superbly crisp trigger pull right from the box, with no adjustment or fine-tuning. Safe enough for tactical operations and combat, yet light enough to ensure an ultra-clean break that’s closer to a bolt action than a typical tactical rifle. Exceptionally short, positive reset gets you back on target and ready to take the next shot almost instantly. Unique hammer geometry keeps weight to a minimum for ultra-fast lock time, yet provides plenty of kick to ensure reliable ignition, even on hard military primers. A secondary “rescue” sear grabs the hammer if the primary sear fails when the weapon is dropped or severely jarred—meets military specifications for drop safety. CNC-machined, hardened tool steel hammer, sear, and trigger body with precision-ground contact surfaces are built to run hard in competition or combat, all contained in the rugged machined aluminum housing. tr-ttu - Single-stage 4 lb. pull has zero take-up and an ultra-clean break. tr-ttu-MiL - Single stage, 5 to 53/4 lb. pull. tr-ttu-M2 - “Semi” two-stage, match-grade 4 lb. trigger has an abbreviated initial stage that establishes sear engagement for safe, reliable operation in high-stress tactical environments, followed by a clean secondstage release. tr-ttu-3g - Rolling two-stage trigger designed for 3 gun competition features a short pull with a 3.5 to 4 lb. break and super-fast reset for quick follow up shots. Eliminates “trigger freeze” in the heat of competition or during tactical shooting. trttu-H2 paul Howe Model is a two-stage trigger with a nice, crisp 41/2 to 5 lb. break. It can be installed by the average AR shooter in about a minute without having to remove the rifle’s selector. Fully pre-set at the factory; no screws adjust - ever. Endorsed by Paul Howe, high-risk training instructor, 20-year U.S. Army veteran with 10 years in Special Operations, and sought-after expert on CQC and military/LE small arms tactics. a b SPECS: Trigger/Hammer/Sear – Hardened tool steel, matte gray finish. Housing – Aluminum, anodized, matte black. Fits AR-15 with .154" trigger and hammer pins. Includes two .154" pins and installation instructions. #965-000-071EN tr-ttu tactical trigger unit, 5F249K99 � � � � � � � � � � � � � � � � � � � � � � � � $ 269.99 #965-000-145EN tr-ttu-MiL tactical trigger unit, 5F249G99 � � � � � � � � � � � � � � � � � � � � � � � � 269.99 #965-000-088EN tr-ttu-M2 tactical trigger unit, 5F249A99 � � � � � � � � � � � � � � � � � � � � � � � � 269.99 #965-000-179EN tr-ttu-3g tactical trigger unit, 5F249L99 � � � � � � � � � � � � � � � � � � � � � � � � 269.95 965-000-210EN tr-ttu-H2 tactical trigger unit, 5F246J81� � � � � � � � � � � � � � � � � � � � � � � � � 269.99
ROCK RIVER ARMS AR-15 NATIONAL MATCH 2-STAGE TRIGGER
Lightens & smoothes trigger pull For improved accuracy
Drop-in, match grade trigger provides a crisp, 41/2 to 5 lb., 2-stage, trigger pull to improve accuracy for competition or varmint shooting. Sear engagement point is located behind the hammer to reduce pull weight. Low mass hammer speeds lock time. Includes trigger and hammer pins. Fits AR-15 receivers with .154" hammer and trigger pins. a b SPECS: Steel, matte black finish. Fits AR-15 receivers with .154" hammer/ trigger pins only. #739-000-011EN .154" 2-stage trigger, 9C109P99 � � � �$ 119.99
