65 minute read
D #526-000-160eN LeupOLD MArK 2 iNTeGrAL MOuNTiNG sYsTeM See
For Quick-Detach Mounting Of Popular Optics To Flattop Rifles
Compact, quick-detach mounts clamp directly to AR-15/M16/ M4 flattop receiver rail for solid, ultra-secure attachment of optics and holographic sights. The strong, yet lightweight aluminum base is secured to the rail by steel throw levers and locking feet, while a recoil lug locks into one rail slot to prevent unwanted sight movement under recoil. Quick-release levers close securely against the side of the mount to prevent snagging on other objects, yet release easily when you want to remove the sight and mount as one unit without loss of zero. a b
Advertisement
ACOG MOUNT - Adaptermount lets you easily install a Trijicon® ACOG scope designed for carry-handle rifles on a flattop receiver. Compact size keeps weight to a minimum. Raises the ACOG .275" above the receiver rail. Dual Lever ACOG SPECS: Aluminum rail, hardcoat Single Lever ACOG anodized, matte black; steel lever, oxide finish, matte black. 311/16" (9.4cm) long. 2.5 oz. (72 g) wt. #100-003-311EN ACOG Mount, 3A115I00 � � � � � � � � � � � $ 119.99
#22M68 AIMPOINT COMP MOUNT - Compact, single-ring mount for Aimpoint CompML, CompML2, CompML3, or similar red dot sight requiring a single 30mm ring. The top half of the ring is machined steel for superior strength and secured by four hex-head screws (wrench included) to ensure full contact with the sight body. Spacer raises the Aimpoint Comp Mount Aimpoint Comp 1/2" for co-witness with iron sights when mounting directly to flattop receivers. Can also be used on #22TX30 Trijicon Tri-Power Mount. SPECS: Mount - Hardcoat anodized aluminum and Parkerized steel, matte black. 25/16" (5.6 cm) long. 3.9 oz. (109 g) wt. Spacer – Aluminum, hardcoat anodized, matte black. 2.3" (58mm) long, .54" (13 mm) high. 1 oz. (28g) wt. Mounting screws included. #100-003-314EN Aimpoint Comp Mnt, 3A95J17 � � � � � $ 109.00 #100-004-815EN 1/2" Mount Spacer, 3A9Q24� � � � � � � � � 9.99 #63 RISER MOUNT - Quick-detach riser mount provides 3/4" (1.9cm) additional height for mounting optics with large objective lenses. Compatible with STANAG mounts and features a seethrough tunner that allows continued use of iron sights. SPECS: Aluminum rail, hardcoat anodized, matte black; steel levers, oxide finish, matte black. 53/8" (13.7 cm) long. 4.5 oz. (128 g) wt. #100-003-313EN Riser Mount, 3A137N00 � � � � � � � � � � � $ 145.00
M & A AR-15/M16 FLAT TOP SCOPE MOUNT
Integrated Mount & Rings For Rugged Strength
One-piece mount provides strong, secure scope attachment that withstands the bumps and knocks of hard tactical use. Positions scope well above flattop receiver for easy heads-up aiming. Each ring is 11/8" long for maximum contact with scope body, and caps have four hex head clamping screws for recoil-proof holding power. Two, steel, thumb screws and full-length clamping bar securely lock mount to Picatinny receiver rail. Rounded contours and radiused edges resist snagging on other gear. Machined aluminum keeps weight to a minimum. Models available to fit 1" and 30mm scope bodies. a b SPECS: Aluminum, hardcoat anodized, black, matte finish. 51/8" (13cm) Flattop-Mounted Bases With Interchangeable Modular Ring/Riser Options
Machined aluminum mounts clamp directly to a MIL-STD 1913 Picatinny flattop rail to raise the scope and push it forward, eliminating the need for separate risers or specialized short eye relief optics. Slides into place and secures with steel crossbolts that hold tight. a b
MARK 1/MARK 2 RAILS - Eleven MIL-STD 1913 Picatinny cross-slots on top offer plenty of flexibility in Mark 1 Rail Mount ring spacing. Mark 1 locks into place on the receiver with two, flush-fitting T-15 Torx® screws. Mark 2 rail provides the same advantages as the Mark 1, with the added benefit of easy-to-grasp 1/2" hex nuts on the crossbolts for quick-release removal and re-install without loss of zero. Mark 2 Rail Mount SPECS: Aluminum, hardcoat anodized finish, matte black. Steel crossbolts. 51/2" (14cm) long. #526-000-157EN Mark 1 Rail Mount, 4K40F26 � � � � � � � � �$ 50.99 #526-000-158EN Mark 2 Rail Mount, 4K69N87� � � � � � � � � 77.99
MARK 2 INTEGRAL MOUNTING SYSTEM - Uses the same clamping system as the Mark 1 and adds builtin scope rings with the correct elevation for proper eye alignment with the scope – no need for a separate riser assembly. Cantilever on the front ring lets you position the scope far enough forward for comfortable eye relief. Models available for 1" or 30mm diameter scope tubes. SPECS: Aluminum, hardcoat anodized, matte black. Steel crossbolts. 51/2" (14cm) OAL. #526-000-159EN Mark 2 Integral Mounting System, 1" Rings, 4K90B04� � � � � � � � � � � � � � � � � $ 105.99 #526-000-160EN Mark 2 Integral Mounting System, 30mm Rings, 4K90F04 � � � � � � � � � � � � 105.99
MARK 4 INTEGRAL MOUNTING SYSTEM - Versatile cantilever mount gives you maximum adaptability with modular components, each sold separately. The Mark 4 Base clamps securely to the receiver rail with a pair of hex head crossbolts and accepts the Scope Ring Insert unit that contains both scope rings. The insert’s position can be adjusted on the base to accommodate different eye relief requirements. Add the 20 MOA Riser Insert between the base and ring insert to provide additional elevation for addressing long-range targets without exceeding your scope’s elevation adjustment or resorting to holdover. SPECS: Aluminum, hardcoat anodized, matte black. Steel crossbolts. 53/4" (14.6cm) long. #526-000-161EN Mark 4 Integral Mounting System, Base, 4K71G09 � � � � � � � � � � � � � � � � � � � � $ 77.99 #526-000-162EN Mark 4 20 MOA Riser Insert, 4K43A79 � � � � � � � � � � � � � � � � � � � � � � � � � � 50.99 #526-000-163EN Mark 4 Ring Insert, 1", 4K86Q44� � � � � 100.99 #526-000-164EN Mark 4 Ring Insert, 30mm, 4K86C44 � � � � � � � � � � � � � � � � � � � � � � � � � � 100.99
O.A.L.. Height measured from top of rail to bottom of ring. 1" - 1.18" (2.99cm) high, 10.7 oz. (303g) weight; 30mm - 1.14" (2.89cm); 10 oz. (283.5g) weight. #553-000-005EN Flattop Scope Mount, 1", 3E45D26� � � �$ 53.99 #553-000-007EN Flattop Scope Mount, 30mm, 3E45P26 � � � � � � � � � � � � � � � � � � � � � � � � � � � 53.99 Rock Solid, Quick-Detach Mounts With Repeatable Accuracy
Quick-detach mounts provide a rock-solid platform for a variety of optical sights on Picatinny flattop rails. GG&G's innovative Accucam latch system provides quick removal and installation in just seconds while maintaining 1/2 MOA repeatable accuracy. Plus, it's tension adjustable for a solid fit even on out-of-spec rails. All mounts are precision machined from 6061 T6 aluminum and hardcoat anodized for added durability; clamping systems are 4140 steel for maximum strength. Non-reflective matte black finish. a b
ACCUCAM MOUNT w/INTEGRAL 30mm RINGS - Designed specifically for the AR weapon platform with rings spaced 4.400" center-to-center for excellent eye relief adjustment. Height from top of dovetail to centerline of ring is 1.400" for good cheekweld. Top ring straps secured with four Allen head screws for recoil-proof hold. 5" (12.7cm) long x 23/16" (5.6cm) wide. #336-000-012EN Accucam Mount w/30mm Rings, 6C203L99 � � � � � � � � � � � � � � � � � � � � � � � � $ 203.99
AC-30 ACCUCAM MOUNT w/30mm INTEGRAL RINGS - Gives the shooter additional eye relief when crouching, sitting, or prone position. Tall enough to provide clearance for large objective lenses on long-range rifle scopes, while skeletonized frame reduces weight. Not recommended for use on .50 BMG. 5" (12.7cm) OAL, 4" (10.2cm) mounting base length. 3 3/4" (9.5cm) inside ring-to-ring 336-000-054EN AC-30 Accucam Mount w/30mm Integral Rings, 6C214N99 � � � � � � � � � $ 214.99 FLT ACCUCAM MOUNT - Designed to meet the needs of SPR shooters, with 30mm integral rings, this mount permits forward scope mounting and positions the scope 11/2" further forward than standard GG&G scope mounts. 5" (12.7cm) OAL. 33/4" (9.5cm) inside ring-to-ring. 336-000-055EN FLT Accucam Mount, 6C204E99 � � � $ 204.99
ACCUCAM LEVER FOR EOTECH - Camoperated quick-detach lever replaces existing thumbnut mounting screw on EOTech sights for rapid installaton and removal. Does not change the mounting height of EOTech and allows co-witnessing with iron sights. 500 Series fits EOTech models 511, 512, 551, and 552. XPS Series fits EOTech XPS2 and XPS3 sights. #336-000-017EN Accucam Lever For EOTech 500 Series, 6C78I87 � � � � � � � � � � � � � � � � � � � � $ 86.99 #336-000-041EN Accucam Lever For EOTech XPS Series, 6C78H87 � � � � � � � � � � � � � � � � � � � 86.99
ACCUCAM MOUNT FOR TRIJICON ACOG - Low-profile, steeland-aluminum mount attaches directly to the body of the ACOG with two large Allen head screws for a rock-solid installation. Cam-operated quick-detach lever allows easy removal and installation of sight. Fits all standard and compact ACOG scopes designed for mounting to flattop receivers. #336-000-018EN Accucam Mount For ACOG, 6C119I86 � � � � � � � � � � � � � � � � � � � � � � � � � $ 138.99
ACCUCAM BASE W/PICATINNY RAIL - Gives quick-detach capability to any scope you mount on your flattop AR. Topside slots are machined to true MIL-STD 1913 specs to accept any Picatinny scope rings. Mount also elevates the scope an extra 1/2" above the receiver. #336-000-011EN Accucam Base w/Picatinny Rail, 6C145M83� � � � � � � � � � � � � � � � � � � � � � � � $ 149.99 Solid, Yet Easily Detachable One-Piece Scope Mount For Your Flattop
Quick-attach/detach flattop scope mount is designed to stay permanently installed on the scope at all times. Quick-release hex nuts make it easy to remove it from the rifle to swap onto a different rifle or replace with a different optic. A built-in 20 MOA elevation maximizes long-range capability. Machined from strong, rigid 7075-T6 aluminum to precise tolerances to ensure the scope is not subjected to stress, torquing, or bending as the ring screws are tightened. Titanium crossbolts and jaws hold securely to the rifle’s MIL-STD 1913 Picatinny without adding excess weight. Micro-radiused and inside edges honed to prevent the rings from scratching the scope tube. a b SPECS: Machined 7075 T6 aluminum, hardcoat finish, matte black. Accepts scopes with 30mm O.D. tubes. Clamping footprint: 2.725" of rail space. Heights measured from top of receiver rail to centerline of scope. #749-012-016EN UniMount High (1.125"), 2E00KKC � � � � � � � � � � � � � � � � � � � � � � � � � $ 252.00 #749-012-017EN UniMount Extra High (1.375"), 2E00HUD � � � � � � � � � � � � � � � � � � � � � � � � 252.00
JP ENTERPRISES AR-15/M16 FLATTOP OPTIC MOUNT
Integral Offset Rings For Rock-Solid Mounting
One-piece, aluminum mount with integral rings is precision machined to true MIL-STD 1913 Picatinny specs for a secure fit on flattop receiver rails. Ring height and forward offset are ideal for use with long eye relief scopes. Mounts available for 1"/30mm, 34mm, and 35mm scope tubes. 1"/30mm mount accepts scopes with both 30mm tubes and, using the included polymer adapter shims, 1" tubes. Torx® head screws (4 on 1"/30mm, 6 on 34mm and 35mm) secure each top ring strap to hold the optics tight under heavy recoil. Full-length base clamps to the receiver with five, equally spaced crossbolts for a rock-solid fit and zero movement. a b SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Includes instructions and T15 and T20 Torx wrenches. 1"/30mm - Approximately 51/2" (14cm) long, 13/4" (4.4cm) wide, 21/8" (5.4cm) high. 7.1 oz. (201 g) weight. Elevates a 30mm optic .965" (24.5mm), measured from top of receiver rail to bottom of scope. 34mm & 35mm - 53/4" (14.6cm) long, 115/16" (4.9cm) wide, 21/2" (6.3cm) overall height. 7 oz. (198g) weight. Height - .760" (1.9cm), measured from top of receiver rail to bottom of scope tube. #452-000-044EN 1"/30mm Flattop Optic Mount, 2E154F29� � � � � � � � � � � � � � � � � � � � � � � � � �$ 170.95 #452-000-124EN 34mm Flattop Optical Mount, 2E154M29 � � � � � � � � � � � � � � � � � � � � � � � � � 170.95 #452-000-125EN 35mm Flattop Optical Mount, 2E192C86 � � � � � � � � � � � � � � � � � � � � � � � � � 213.71
The Brownells Guarantee!
If you aren’t completely, 100% satisfied with any purchase you receive from Brownells, for any reason, at any time, return it for a full refund or exchange. Your complete satisfaction is what’s most important to us.
Cantilever Mount For Optics, Magnifiers Or Night Vision Devices
Extended cantilever mount provides plenty of eye relief to mount a 30mm scope, or position a magnifier, night vision device, or other sighting accessory behind the main optic. Two quick-release levers clamp to a flattop receiver rail with unique cam action for a tight hold during recoil. Depress the locking tabs, swing both levers open, and the mount easily lifts off the rifle. Cross bars can be adjusted to fit almost any Picatinny rail, including over- or under-sized commercial rails. Levers may be positioned to open to the front or the rear to suit the operator’s preference. Five, heavy duty steel hex head screws (three on top, two on bottom) clamp the 30mm vertically split ring halves together. a b SPECS: 6061 T6 aluminum, Type III mil-spec hardcoat anodized finish, flat dark earth. Steel cross bars, matte black. 6" (15.2cm) O.A.L. Requires 4" (10.2cm) of rail space. Height measured from top of rail to bottom of scope body: .87" (2.2cm) high. Distance between rings: 21/2" (6.3cm.). 7.1 ounces (201g) weight. #100-004-771EN Quick-Detach Optic Mount, 1A199J99� � � � � � � � � � � � � � � � � � � � � � � � � $ 199.99
YANKEE HILL MACHINE AR-15/M16/AR-308 SCOPE RISER
Minimalist Design Raises Optics ½"
This streamlined mount raises any scope or red dot sight ½" for easier eye alignment without adding needless bulk or weight to the gun. Precision-machined, 5½" base mounts quickly and easily to any Picatinny rail to provide a secure and stable base for your sighting equipment. a b SPECS: Aircraft grade aluminum, hardcoat anodized matte black. 5¼" length, ¾" total height, 1¼" width. Raises equipment ½". #100-010-687EN 227A Scope Riser, 9A24F65 � � � � � � � � � $ 32.80
WARNE AR-15/M16 R.A.M.P. TACTICAL MOUNT
Cantilevered For Long Eye Relief Scopes, Plus 45° Offset Rails For Secondary Sights
The Rapid Acquisition Multisight Platform (R.A.M.P.) is a one-piece cantilever mount with integral scope rings that positions optics farther forward to provide 13/4" of extra space at the rear for mounting a long eye relief scope, night vision device, or magnifier. Features removable MIL-STD 1913 Picatinny rails on the left and right sides that let you mount secondary sights 45° off-axis from the main optic. Each top ring strap is secured with four Torx® screws for recoil-proof holding power. Two large hex nuts and 33/4" long steel clamping bar lock the mount to a Picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging. Models available for 1" or 30mm scope body. a b SPECS: 6061 T6 aluminum, hardcoat anodized, and steel hardware, magnesium phosphate finish, matte black. 71/8" (18.1cm) long, 23/8" (6cm) wide, 21/4" (5.7cm) high. Height measured from top of rail to bottom of ring: .75" (1.9cm). Approximately 9.7 oz. (275g) weight. #947-000-263EN 1" R.A.M.P. Tactical Mount, 7D142L01� � � � � � � � � � � � � � � � � � � � � � � � � $ 169.99 #947-000-264EN 30mm R.A.M.P. Tactical Mount, 7D142F01� � � � � � � � � � � � � � � � � � � � � � � � � 169.99
Customizable, Quick-Detach Mount Positions Scope At Eye Level
Modular riser mount clamps to a flattop Picatinny receiver, so you can mount a scope at correct eye level for maximum accuracy. The separate base has two, oversized, easy-grip thumbscrews and full-contact clamping along entire length of base to provide rocksolid attachment to receiver without permanent modification of gun. This mounting system will not shoot loose no matter how many rounds you send downrange. Risers with true, MIL-STD 1913 Picatinny rail on top are sold separately, so you can choose one with the precise rail height and angle to suit your needs; riser is secured to base with three Allen head setscrews. Use an angled riser when you need to raise or lower the point of impact more than the scope’s internal elevation adjustment will allow. Standard risers are 51/2" long; extended riser is 10" long to provide additional mounting area for large scopes, or those requiring long eye relief, as well as optic/magnifier combinations. Entire unit—base, riser, and attached scope—can be removed quickly so you can use your rifle’s factory sights. Reinstall unit in seconds without losing scope settings. a b SPECS: Precision machined 6061 T6 aluminum, hardcoat anodized matte black. 51/2" (14cm) long; extended riser is 10" (14cm) long. Base is 1" (2.5cm) wide, .3" (7.62mm) high. Available riser heights (including base): 3/4" (1.9cm), 1" (2.5cm), 11/4" (3.2cm). Base and risers sold separately. #080-000-410EN MFRMS Base, 8K31C54 � � � � � � � � � � � � � $ 39.99 #080-000-413EN MFRMS 3/4" Riser, 9A14M58 � � � � � � � � � 19.99 #080-000-704EN MFRMS 3/4" Ext. Riser, 8K23G75� � � � � � 29.99 #080-000-412EN MFRMS 1" Riser, 8K14P86� � � � � � � � � � � 19.99 #080-000-411EN MFRMS 11/4" Riser, 8K20A15 � � � � � � � � � 26.99 #080-000-414EN MFRMS 1" 15 MOA Riser, 9A14B19 � � � 19.99 #080-000-416EN MFRMS 1" 30 MOA Riser, 8K14B27 � � � 19.99
EGW AR-15/M16 EXTENDARISER FLATTOP MOUNT
Model
Elevates Optic For Fast Target Acquisition; Extra Length For More Eye Relief
Precision-machined aluminum riser mount adds approximately .600" to height of flattop so primary optic can be positioned higher for a more comfortable, heads-up shooting stance and faster target acquisition. Eliminates the need for extra-high rings in most installations. Top of mount is available in 0 or 20 MOA to compensate for added height and minimize effect on pointof-impact. Provides a full 7" of usable mounting length, 11/2" more than receiver rail; underside of extension is relieved to provide clearance over handguard. Precision machined from lightweight, aluminum billet, with MIL-STD 1913 Picatinny slot-and-rail spacing that allows fast and simple adjustment of eye relief, plus greater flexibility in choice of optics. Clamps securely to receiver rail with three heavy duty steel cross-bolts to prevent movement under recoil, and matches receiver profile for a smooth, seamless look. Accepts Picatinny scope rings. a b SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 8.875" (22.5cm) long, 1.125" (2.9cm) wide at base. Adds .600" (1.5cm) to height of flattop at rear, .570" (1.4cm) at front. 7.7 oz. (219g) weight. #296-000-103EN Extendariser Flattop Mount, 20 MOA, 6B107Q14 � � � � � � � � � � � � � � � � � � � � � � � � �$ 124.99 296-000-228EN Extendariser Flattop Mount, 0 MOA , 6B107Q14 � � � � � � � � � � � � � � � � � � � � � � � � � 124.99 Raises Optical Sights To Eye Level For Quick, Precise, Target Acquisition
Machined aluminum riser clamps to flattop AR-15 receiver to position primary optic sights at eye level. Raises mounting height .750" to eliminate the need for extra-high rings in most applications. True, MIL-STD 1913 cut accepts Picatinny rings. Two, easy-to-grip, slotted hex nuts accept a U.S. quarter for extra tightening leverage; full-length clamping bar locks riser securely to flattop receiver for zero movement even during harsh tactical operations. Precision CNC machined to ensure an exceptionally secure lock on the receiver rail. Smooth, curved front and rear contours on the underside provide a streamlined appearance, reduce weight, and minimize the chance of catching on gear. a b SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Approximately 5" (12.7cm) long, 1" (2.5cm) wide at the base, .975" (2.45cm) high overall. Adds .75" (1.9cm) to height of flattop. 4.8 oz. (136 g) weight. #080-000-506EN Flattop Riser Assembly, 8K35I47 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 46.99
WILSON COMBAT AR-15/M16 ACCU-RIZER FLATTOP SCOPE MOUNT
For Quick Scope Detach/Reattach Without Loss Of Zero
One-piece riser mount with integral rings provides additional elevation from top of rail to centerline of ring to ensure a proper cheek weld. Precision machined from aluminum bar stock for a secure fit on flattop receiver rail. Scope and mount form a single unit for fast attachment and removal without loss of zero. Mounts by hand tightening the oversized thumb screw to clamp the locking plate. The captive, spring-loaded locking plate maintains a positive mechanical connection that resists loosening under shock and vibration. Four hardened Torx®-head screws clamp each ring cap to the lower half. Models available for scopes with 1" or 30mm diameter bodies. 1" mount includes a Picatinny rail on the rear scope ring for mounting a holographic red dot sight. 30mm model’s forward cantilever lets the scope overhang the front of the receiver to ensure plenty of eye relief. a b SPECS: Aluminum, hardcoat anodized, black. Approx. 5" (12.7cm) long, 17/8" (4.8cm) wide. Approx. 8 oz. (227g) weight. 1" - Height from top of base to inside bottom of ring: 1.2" (30.5mm). 30mm - Height from top of base to inside bottom of ring: 1" (2.5mm). #965-000-087EN Accu-Rizer 1" Scope Mount, 5F149A99 � � � � � � � � � � � � � � � � � � � � � � � � �$ 161.99 #965-000-104EN Accu-Rizer 30mm Scope Mount, 5F149M99 � � � � � � � � � � � � � � � � � � � � � � � � � 161.99
AR-15/M16 CARRY HANDLE SCOPE MOUNT
Fast, Easy Mounting For Scopes & Dot Sights
Mounts directly on carry handle. Open sight channel allows use of sights. Cross-bar supports prevent crushing. Has true MIL-STD 1913 Picatinny cut cross-slots along its entire length a b SPECS: Aluminum, black, matte. 71/2" (19cm) long. 31/2 oz. (99g) wt. #080-000-660EN Picatinny Carry Handle Base, 9A22D46 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 24.99
Provides Extra Eye Relief For Long Scopes & Clearance For Large Objectives
Easy-to-install, clampon Picatinny riser increases your scope and sight mounting options on any flattop receiver. Extended length provides additional mounting slots for increased eye relief, added height gives clearance for scopes with large objective lenses. Features numbered slot markings, 10mm clamping nuts, square shoulder cross-slot bolts, and full length clamps to help prevent movement caused by recoil. Hi Rise model is drilled for STANAG ring installation. a b SPECS: Aluminum, hardcoat anodized, matte black. Lo-Pro - 79/16" (19.2cm) long, .250" (6.3mm) high. 3.2 oz. (90g) wt. Hi-Rise - 77/8" (20cm) long, 1/2" ( 12.3mm) high. 6.6 oz. (187g) wt. #434-000-010EN Lo-Pro Extended Riser, 4C52Q00 � � � $ 65.00 #434-000-011EN Hi-Rise Extended Riser, 4C55M20 � � � 69.00
MGW AR-15/M16 SCOPE MOUNT
Lightweight, Fast-On, Fast-Off Scope Mount Requires No Gunsmithing
Securely locks in top of the carry handle with a single, thumb screw. Ultra-rigid design will not deform under pressure from rings. Does not obscure the factory sights. Accepts Weaver-style rings. a b SPECS: Extruded aluminum, black, hard-coat, anodized, matte fin-ish. 1.5 oz. (43 g) wt. Includes thumbscrew and lock washer. #584-590-015EN AR-15/M16 Mount, 4H19I29 � � � � � � � $ 25.99
TAPCO AR-15/M16 CARRY HANDLE MOUNT
For Easy Mounting Of Optics To A2 “Carry-Handle” Rifles
Clamps to the carry handle of an A2-style rifle to allow installation of a scope, holographic red dot sight, or other optic that requires Picatinny receiver rail mounts. Removes easily with the optic still attached, so you can quickly switch back to A2 configuration. One-piece, fiberglass-reinforced molded polymer construction is lightweight yet incredibly strong. Installs in seconds and cinches down tight with a steel bolt and easy-to-grip thumb. Sight tunnel under the rail allows continued use of factory iron sights as backups or for close-range shooting. a b SPECS: Fiberglass-reinforced molded polymer, black. 51/4" (13.3cm) O.A.L. Fits AR-15/M16 with A2-style carry handle. #100-004-292EN Carry Handle Mount, 5A11F99� � � � � � � $ 12.99
Install A Red Dot; Retain Use Of Issue Sights
Clamps into the carry handle channel and positions a Picatinny rail ahead of the recevier, over the handguard for mounting a red dot or other sight. Still use the issue sights. Clears M4 handguards and free-float tubes. a b SPECS: Aluminum, anodized, matte black. Fits A1 and A2 carry handles. #100-000-498EN M4 Carry Handle Mount, 1K84N00 � � � � � � � � � � � � � � � � � � � � � � � � � $ 113.29
Keeps Iron Sights From Blocking EOTech Reticle, Preserves Co-Witness Capability
Rugged, yet lightweight riser mount positions your EOTech holographic sight .300" higher, so your rifle’s iron sights are less apt to interfere with the EOTech’s reticle, while preserving co-witness capability. Also helps you maintain a more comfortable, heads-up shooting form. Clamps to your flattop rifle’s Picatinny rail with a single hardened steel setscrew; a securing tab up front locks into one of the rail’s slots to ensure a solid, recoil-proof fit. Precision machined from solid aluminum, then mil-spec hardcoat anodized for extra strength and wear resistance. a b SPECS: Aluminum, hardcoat anodized, matte black. 53/16" (13.5cm) long, 13/16" (4.6cm) wide, .525" (1.3cm) overall height. 2.5 oz. (70g) weight. Fits AR-15/M16 with flattop receiver only. #100-003-101EN EOTech Riser Mount, 9A34M10 � � � � � $ 38.80
Lightweight, Streamlined Quick-Detach Mount Won’t Block Iron Sights
Precision-machined aluminum scope mount attaches securely to the carry handle of your AR-15/M16/M4 to provide a solid, lightweight platform for tactical optics. MIL-STD 1913 rail cut accepts Picatinny and STANAG mounting systems, while hollow, .335" diameter sight channel offers unobstructed use of standardissue iron sights without removing mount. Locks tightly in place with hardened steel stud and knurled nut that also allow fast, easy removal and reattachment of mount and attached optics without loss of zero. Positions scope to provide adequate eye relief when wearing a protective chemical/biological mask. Standard issue for Israeli Defense Forces, and deployed with the U.S. Armed Forces. NSN #1005-01-534-8696. a b SPECS: Machined 6061 T6 aluminum, hardcoat anodized, black, matte finish. 53/8" (13.6cm) long. 2.5 oz. (71g) weight. Made in U.S.A. #851-000-071EN Carry Handle Scope Mount, 1E73H65� � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 82.95
SAMSON MANUFACTURING CORP. QUICK-FLIP MOUNT FOR
AIMPOINT 3XMAG
Flips Magnifier Aside For Instant Transition From Long-Range To CloseRange Targeting
Quick-transition mount combines secure, correct-height attachment of an Aimpoint 3XMag behind a compatible red dot sight with a spring-loaded mechanism that flips the magnifier aside for instant return to unmagnified operation of sight. Lets you shift from long-range to short-range targeting almost instantly. Securely installed to any MIL-STD 1913 Picatinny receiver rail with a robust locking bar and bolt system, so the magnifier stays correctly positioned behind the sight. Mount bolts directly to the factory holes in the bottom of the 3XMag (machine screws included)—no gunsmithing required. Lever can be installed so flip path is on left or right side. Quick-flip tab has deep grooves for easy activation with a flick of your thumb. a b SPECS: Aluminum, hardcoat anodized, matte black. #100-004-239EN Quick-Flip Mount w/Bolt-On Base, 1B154P29� � � � � � � � � � � � � � � � � � � � � � � � � $ 169.99
WARNE MAGNUM SPECIAL APPLICATION MAXIMA RINGS
Rugged Steel, Close-Tolerance Dovetails For Secure Mounting
Vertically split rings, precision-machined from steel barstock, hold large objective, heavy scopes firmly against recoil. Finished to exacting tolerances so the scope returns to zero, even after repeated dismounting and remounting. Permanent mount (Perm) uses two socket screws to solidly lock rings to base. Quick detach (QD), double lever rings clamp quickly and tightly; dismount instantly when you lift the lever. Levers can be repositioned so both rest at the same angle. Ultra High rings give correct height for flattop AR-15 and H&K SL7 rifle. a b SPECS: Steel, blued, matte finish. Height measured from top of base to bottom of ring saddle. QD: 1" (2.5cm): X-High - .650" (16.5mm) and UltraHigh - .935" (23.7mm); 30mm (1.18"): X-High -.650" and Ultra-High - .850" (21.6mm). Perm: 1" X-High - .650" and 30mm X-High - .650". All models fit Warne Maxima, Weaver, and Picatinny bases.
STOCK # DIA./HEIGHT TYPE PRICE #947-000-003EN 1"/X-High Perm 7D49F26 $ 61.99 #947-000-004EN 1"/X-High QD 7D75D22 $ 97.99 #947-000-005EN 1"/Ultra High QD 7D75N22 $ 97.99 #947-000-008EN 30mm/X-High Perm 7D49E27 $ 61.99 #947-000-009EN 30mm/X-High QD 7D88H41 $ 113.99 #947-000-010EN 30mm/Ultra High QD 7D88D41 $ 113.99
TACTICAL PRECISION TSR™ & TSR “W” RINGS
Super Holding Power, Precision Alignment
Rugged tactical rings are precision machined to tolerances of .0002" for maximum scope/ring contact to hold scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Large clamp-nut lets you torque ring to base. Radiused edges and corners help prevent snagging while providing attractive appearance. TSR - 7075-T6 aluminum, fits MIL-STD 1913 Picatinny base. TSR “W” Series - 1215 alloy steel, fits Weaver bases. 34mm - Accepts Schmidt & Bendertype 34mm scope tubes. Heights in tables below are measured from top of base to center of ring. a b SPECS: 5/8" (15.8mm) wide. TSR - 7075-T6 Aluminum black, hard anodized to Mil-A-8625 standards. TSR “W” Series - 1215 alloy steel, Mil-C-13924 oxide finish, matte black.
TSR ALUMINUM RINGS
STOCK # HEIGHT SIZE PRICE #100-000-951EN Low - .785" 1" 9K63D90 $ 74.99 #100-000-952EN Med - .985" 1" 9K63Q90 $ 74.99 #100-000-953EN High - 1.185" 1" 9K66D77 $ 77.99 #100-000-957EN Low - .925" 30mm 9K68B19 $ 79.99 #100-000-958EN Med - 1.075" 30mm 9K68E19 $ 79.99 #100-000-959EN High - 1.225" 30mm 9K71D03 $ 82.99
TSR “W” SERIES STEEL RINGS
STOCK # HEIGHT SIZE PRICE #100-001-403EN Low - 785" 1" 9K71M71 $ 83.99 #100-001-404EN Med - 985" 1" 9K71B71 $ 83.99 Robust, Versatile, Affordable Rings For Tactical & Sporting Rifles
These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage— you can even use a U.S. quarter in a pinch. Crossbolt has a square shank that serves as a recoil lug to solidly engage scope base when properly installed to ensure rings won’t shift forward under recoil. Four, strong 6-40 x 1/4" T-15 Torx® head screws securely anchor the ring halves, and large contact area with scope helps prevent slippage even on heavy-recoiling, magnum rifles. Available in 4140 billet steel for superb strength and stability, or aluminum models machined from 6061 T6 billet for reduced weight. Matte black finish blends with most factory rifle and scope finishes. Replacement nut, crossbolt, and aluminum or steel side locking bars available separately. a b SPECS: Rings sold in pairs. Models available to fit 1" and 30mm scope bodies. Steel - 4140 billet steel, black, matte, oxide finish. Aluminum - 6061 T6 aluminum billet, hardcoat anodized black, matte. Heights measured from top of base to center of ring: Low - .825" (2.1cm); Med. - 1" (2.5cm); High - 1.125" (2.9cm); Extra-High - 1.375" (3.5cm). #080-000-436EN Low 1" Picatinny Rings, Steel, 8K67M54 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 89.99 #080-000-437EN Med 1" Picatinny Rings, Steel, 8K67C54 � � � � � � � � � � � � � � � � � � � � � � � � � � 89.99 #080-000-438EN High 1" Picatinny Rings, Steel, 9A67F54� � � � � � � � � � � � � � � � � � � � � � � � � � � 89.99 #080-000-433EN Low 1" Picatinny Rings, Aluminum, 9A55G27 � � � � � � � � � � � � � � � � � � � � � � � � � � 69.99 #080-000-434EN Med 1" Picatinny Rings, Aluminum, 9A55J27� � � � � � � � � � � � � � � � � � � � � � � � � � � 69.99 #080-000-435EN High 1" Picatinny Rings, Aluminum, 8K55Q27 � � � � � � � � � � � � � � � � � � � � � � � � � � 69.99 #080-000-811EN Med. 30mm Picatinny Rings, Steel, 8K79E49 � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99 #080-000-740EN High 30mm Picatinny Rings, Steel, 8K79D49 � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99 #080-000-741EN Ex-High 30mm Picatinny Rings, Steel, 8K79B49 � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99 #080-000-810EN Med. 30mm Picatinny Rings, Alum., 8K73E20 � � � � � � � � � � � � � � � � � � � � � � � � � � 89.99 #080-000-738EN High 30mm Picatinny Rings, Alum., 8K73D20 � � � � � � � � � � � � � � � � � � � � � � � � � � 89.99 #080-000-739EN Ex-High 30mm Picatinny Rings, Alum., 8K73J20 � � � � � � � � � � � � � � � � � � � � 89.99 #080-000-708EN Replacement Hex Nut, 8K5A33� � � � � � 7.99 #080-000-709EN Replacement Crossbolt, 8K4F25 � � � � 5.99 #080-000-706EN Replacement Locking Bar, Steel, 8K4L98� � � � � � � � � � � � � � � � � � � � � � � � � � � � 6.99 #080-000-707EN Replacement Locking Bar, Alum., 8K4A25 � � � � � � � � � � � � � � � � � � � � � � � � � � � 5.99
TSR “W” SERIES STEEL RINGS
STOCK # HEIGHT SIZE PRICE #100-001-405EN High - 1.185" 1" 9K74G57 $ 86.99 #100-001-409EN Low - .925" 30mm 9K78Q89 $ 91.99 #100-001-410EN Med - 1.075" 30mm 9K78L89 $ 91.99 #100-001-411EN High - 1.225" 30mm 9K81C76 $ 95.99 #100-003-300EN Med - 1.185" 34mm 9K107M57 $ 124.99 Fast, Precise, Instinctive Heads-Up Sighting
FASTFIRE II - Provides fast, both-eyesopen sighting with a panoramic field of view and unlimited eye relief for an unobstructed view of the area around the target. A high-intensity LED projects a Shown with 4 MOA red sighting dot, while a light Picatinny Mount sensor and integrated control circuitry automatically adjust the dot’s brightness. Coated lens resists scratches and scuffs and is parallax-free to 50 yards. Setscrews let you make windage/elevation adjustments. Battery Save mode helps you get up to 5-year life from one CR-2032 lithium battery. Robust stainless steel and aluminum housing handles the shock of recoil and is gasket-sealed to keep water away from the electronics inside. SPECS: Steel, aluminum, optic-grade glass. 13/4" (4.5cm) long, 1" (2.5cm) wide, 1" high. #118-000-020EN FastFire II, only, 8A199H00� � � � � � � � � $ 199.00 #118-000-019EN FastFire II, w/Picatinny Mount, 8A209E00 � � � � � � � � � � � � � � � � � � � � � � � � 209.00
FASTFIRE III - Same dependable red dot sight as the FastFire II with enhanced features, including a tactile pushbutton power switch, three controllable reticle brightness levels of brightness, an automatic brightness setting, low battery indicator, and automatic power shutoff after 8 hours. Top-accessible battery means you can change it without removing the sight from the gun. Windage/elevation adjustments can be made quickly with a coin. Available with 3 MOA or 8 MOA dot reticle. SPECS: Aluminum, stainless steel, and bronze, matte black finish. 1.9" (48.2mm) long x 1" (25.4mm) wide x 1" high. .9 oz. (25g) wt. Runs on one CR-1632 lithium battery. Not compatible with the AR-F3 FastFire Mount or the Picatinny Protector Mount. #118-000-054EN 3 MOA FastFire III, Sight Only, 8A239H00� � � � � � � � � � � � � � � � � � � � � � � � $ 239.00 #118-000-052EN 3 MOA FastFire III, w/Picatinny Mount, 8A249C00 � � � � � � � � � � � � � � � � 249.00 #118-000-055EN 8 MOA FastFire III, Sight Only, 8A239B00 � � � � � � � � � � � � � � � � � � � � � � � � 239.00 #118-000-053EN 8 MOA FastFire III, w/Picatinny Mount, 8A249D00 � � � � � � � � � � � � � � � � 249.00
AR-F3 FLATTOP FASTFIRE SIGHT - Ready to clamp directly to a flattop receiver, this FastFire III is enclosed in a specially designed mount that positions the optic to co-witness with your AR's iron sights. 3 MOA dot recticle. #118-000-067EN AR-F3 Flattop FastFire Sight, 8A299Q00 � � � � � � � � � � � � � � � � � � � � � � � $ 299.00
PICATINNY PROTECTOR MOUNT - Minimal-profile, lightweight aluminum mount has raised “wings” to protect your FastFire sight from damage. Steel cross-bolt and clamping bar provide a tight, positive lock on Picatinny rails. Hardcoat-anodized, matte black finish. #118-000-016EN Picatinny Protector Mount, 8A69M99� � � � � � � � � � � � � � � � � � � � � � � � � $ 69.99
YOU CAN SHOP ONLINE TOO! www.brownells.com NEW PRODUCTS ADDED DAILY
Engage Targets While You Keep Out Of The Line Of Fire
Non-magnifying optical sight has a dual-path mirror system that lets you identify targets, aim, and fire around obstacles and corners without exposing yourself to return fire. View the target in line-of-sight or at a 90° angle through the side port. Rotates 360° to go immediately from 90° “concealment” mode to standard, shoulder-aimed firing without removing the optic. Unlimited eye relief is compatible with iron sights, scopes, EOTech red dot/holographic sights, laser designators and night vision equipment. Clamps to any MIL-STD 1913 Picatinny rail and requires no zeroing or calibration. Weatherproof construction is safe for use in any environment. a b SPECS: Stainless steel and polycarbonate resin, matte black. 1.8" (4.6cm) long, 2.8" (5.8cm) wide, 2.6" (7cm) tall. 3.9 oz. (110g) wt. Optical aperture .95" (2.4cm) x .95" (2.4cm). #100-005-416EN Accutact Anglesight, 6D246C00 � � � $ 279.99
AIMPOINT PATROL RIFLE OPTIC
Rugged, Reliable & Versatile - Always Ready
Parallax-free, non-magnifying red dot sight is ready at all times, with no switches or levers to fumble with. Simply install the supplied battery, turn the PRO on, and forget about it – for up to 3 years! 2 MOA center-dot, with 6 daylight and 4 night vision brightness settings, enables accurate target engagement under a broad variety of conditions. Includes a detachable spacer that allows co-witnessing with the standard iron sights on AR-15/M16/M4 weapons. Or remove the spacer to install the PRO on shotguns or submachine guns. Integrated “railgrabber” mount with knurled, oversized knob aids in quick attach/ detach on Picatinny rails. Compatible with all generations of night vision devices; may also be used with Aimpoint 3x Magnifier and Concealed Engagement Unit. Flip-up lens caps included. SPECS: Hard-anodized aluminum, black. 51/4" (13.3cm) OAL. 3" (7.6cm) high, including spacer. 13 oz. (368.g) wt. 1x magnification. 30mm tube dia. Unlimited eye relief. 2 MOA dot. Battery life: 30,000 hrs. Waterproof to 150′ (45m) depth. One DL1/3N lithium battery, included. #100-009-902EN Aimpoint Patrol Rifle Optic, 7A00CAR � � � � � � � � � � � � � � � � � � � � � � � � � $ 424.00
ARMAMENT TECHNOLOGY SPECTER DR DUAL ROLE SIGHTS
Switchable Magnification & Illumination Settings Adapt To Any Situation
Power lever allows you to instantly switch from high magnification to low CQB setting. Reticle and dot can be illuminated with five different settings to optimize target acquisition. C-1 has ballistic dual thickness reticule for .223/5.56mm; C-2 reticule works for .308/7.62 x 51mm. Sight comes with quick release levers ; fits standard 1913 Picatinny rail. Sight is AN/PVS-22 night vision compatible. SPECS: Aluminum, hard anodized flat black/gray. C-1: 6"(153mm) length, 2.9"(74mm) width, 2- 1/16"(78mm) height. 1.46 lb (660g) weight. 4x/1x magnification. C-2 : 7 ¼"(183mm) length, 2.95"(75mm) width, 2.875"(73mm)
Enhanced, Night Vision Compatible Edition Of This Popular Red Dot
The Micro T-2 is a redesigned, upgraded evolution of the original T-1 that adds compatibility with all generations of night vision devices (NVD). The T-2 retains the original’s ruggedness and reliability, while adding a unique coating on the front lens that reflects the 2 MOA dot’s red light at nearly 100% efficiency to give the highest possible dot clarity and brightness. This provides a remarkably clear image when used with a 3rd generation NVD and when used with an Aimpoint 3XMag magnifier. With 4 NVD-compatible brightness settings and 8 daylight settings, including one extra-bright setting, the T-2 is ideal for ’round the clock operation hunters, sport shooters, military, and law enforcement. The T-2 has a built-in mount that lets you install it on any rifle, shotgun, or handgun with a Picatinny accessory rail. Robust extruded aluminum housing, matte black anodized, with a mechanical control switch for added reliability. Runs on one CR2032 lithium battery. 50,000-hour continuous-use battery life; 500,000 hours at NVD settings. #100-016-034EN Micro T-2 Sight, 7A733P20� � � � � � � � � �$ 761.00
/EOTECH/ CQB T-DOT HOLOGRAPHIC SIGHT
“T” Aiming Point Calibrated To Eliminate Guesswork In Close-Range Targeting
The Brownells CQB T-Dot Sight is designed for combat and competition shooters who frequently address targets at close quarters. It corrects a common problem with comReticle bat-zeroed optics mounted on an AR-type rifle: the point of impact is significantly lower than the point of aim at close quarters distances. Built by EOTech exclusively for Brownells and based on the popular EOTech EXPS2, the CQB T-Dot eliminates the “guesstimating” when aiming at these targets. It retains the parent design’s 65 MOA circle illuminated reticle with two aiming points calibrated for 50-200 yards and 500 yards. The bottom of the T-Dot’s circle is left open, with a “T” indicating a precise aiming reference zeroed for about 7 yards. All aiming points are calibrated for 5.56mm NATO ammunition. Windage and elevation are adjustable in 1/2 MOA increments. The CQB T-Dot clamps directly to a MIL-STD 1913 Picatinny rail (only 23/4" rail space required) with a built-in quick-detach throw-lever mount. A built-in riser enables lower one-third co-witness with A2-type iron sights. The reticle has 20 brightness settings selected using the control buttons on the left side and is powered by one CR-123 lithium battery (included), easily accessed through the side cap. Sealed, non-magnifying optics are fogproof, shatterresistant, and anti-glare coated. SPECS: Aluminum housing, hardcoat anodized, matte black. 3.5" long x 2.4" wide x 2.8" high. 11.2 oz. (317g) wt. Windage and elevation adjustment range +/- 40 MOA in 1/2 MOA clicks (1/2" at 100 yards). Brightness adjustment range: 146,000:1, brightest to lowest. 20 brightness settings. Uses one (1) CR-123A lithium battery; approx. 600 hour battery life. Operating temperature range -40° to +150° F. Submersible to 10 ft depth. #080-000-971EN CQB T-Dot Sight, 9K549H99� � � � � � � $ 549.99
height. 6x/1.5x magnification. DL 1/3N(3v Lithium battery. #008-000-002EN C1 Specter DR Sight, 8K00MMG� � � $ 2246.00 #008-000-003EN C2 Specter DR Sight, 8K00FES � � � � 2912.00 Single-Focus Sighting Plane Gets You On Target Fast
Non-magnifying (1x) sight delivers the benefits of fast, accurate, red dot sighting, plus the durability of waterproof, fogproof, shockproof Bushnell-quality optics. Bright red 3 MOA dot provides precise, both-eyes-open shooting to get you on target fast without sacrificing accuracy. Eleven position rheostat allows the shooter to match the brightness of the dot to specific shooting conditions. Easy-to-grasp control knob to adjust brightness. Amber-Bright™ multi-coated optics provide a clear, crisp sight picture; unlimited eye relief helps you get on target fast. Adaptable for rifle, shotgun, or handgun use. Available with a built-in low-profile Picatinny/ Weaver-style (Lo-Pro) mount or with a high-rise mount for flattop AR-15 rifles that gives 1/3 co-witness with iron sights. SPECS: Aluminum body, anodized, black finish. 25mm (1") dia. objective lens. 21/2" (6.4cm) long. 4 oz. (113g) wt. 70 MOA adjustment with 1/2 MOA clicks. Up to 3,000 hours of operation on a single battery. Lens covers and CR-2032 battery included. #593-000-054EN TRS-25 Red Dot, Lo-Pro Mount, 2B00HES � � � � � � � � � � � � � � � � � � � � � � � � � � $ 99.99 590-300-037EN TRS-25 Red Dot, Hi-Rise Mount, 2B00IRP� � � � � � � � � � � � � � � � � � � � � � � � � � � 109.99
BURRIS AR-15/M16/AR-STYLE 308 AR -332 & 536 PRISM SIGHTS
Accurate Close-Quarters Sight With Bullet Drop Compensation To 600 Yards
Multi-purpose tactical prism scope with 3x or 5x magnification provides precise targeting from zero to 500 (3x) and 600 (5x) yards. Fully coated optics minimize glare, and Ballistic/CQ™ illuminated reticle enhances target acquisition in low-light conditions. Bracketed cross hairs subtend 18" at 100 yards, with additional dots to provide immediate elevation adjustment from 100 to 500/600 yards. Control knob provides five reticle brightness levels in red or green; reticle appears black in the off position. Removable accessory rails on the top and sides allow mounting of open sights, red dot sights, lasers, or other accessories. Fully-machined aluminum body is hardcoat anodized for extra surface strength, with a non-reflective, matte black finish. Integral mount clamps securely to MIL-STD 1913 Picatinny rail, and also allows easy installation on AR-15/M16 carryhandle receivers. Flip-up lens cap/sunshades included. SPECS: AR-332 - Aluminum, hardcoat anodized, matte black. 40mm tube, 32mm objective lens, 3x magnification. 5.3" (13.4cm) long, 14.2 oz. (403g) wt. 2½" (6.3mm) eye relief, ¼" MOA click adjustment, 32 ft.(9.75m) field of view at 100 yds. Requires one (1) CR-2032 lithium battery, included. Battery life: 200 hours (high), 500 hours (low). AR-536 - Aluminum, hardcoat anodized, matte black. 40mm tube, 36mm objective lens, 5x magnification. 5.75" (14.6cm) long, 18.75 oz. (532g) wt. 2½" (6.3mm) eye relief, 0.33 MOA click adjustment, 20 ft.(6.0m) field of view at 100 yds. Requires one (1) CR-2032 lithium battery, included. Battery life: 200 hours (high), 500 hours (low). #118-000-021EN AR-332 Prism Sight, 8A349G00 � � � � $ 349.00 #118-000-044EN AR-536 Prism Sight, 8A399F00� � � � � 399.00
ANTI-REFLECTION DEVICE (ARD) - Easy-toinstall, screw-on objective lens attachment features a honeycomb pattern to reduce lens glare and help the shooter stay concealed. Does not affect sighting. #118-000-070EN AR-332 Prism Sight ARD, 8A34D99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 34.99 #118-000-071EN AR-536 Prism Sight ARD, 8A34P99 � � � � � � � � � � � � � � � � � � � � � � � � � � 34.99 High-Resolution Optics & Repeatable Tracking For Superb Accuracy
Variable-power, precison tactical scopes have 30mm tubes, Leupold’s legendary high-resolution optics, and repeatable tracking for long range accuracy. They feature side parallax adjustment for fast, easy focusing from 50 yards to infinity. Large, easy-to-grasp target turrets with repeatable tracking allow an easy return to zero once you’re sighted in. M5-FF front focal plane scopes maintain the exact spacing of the Mil-Dot subtensions regardless of the magnification selected. All other models are rear focal plane scopes that change subtension spacing at each different magnification setting. M1/M5/Tgt models have 1/4 MOA elevation and windage adjustments; M3 models have 1 MOA elevation and 1/2 MOA windage adjustments. Choose from Mil-Dot, Illuminated Mil-Dot and Illuminated Tactical Milling Reticle (TMR) similar to a Mil-Dot reticle but with finer stadia for more precise range estimation. Available reticle styles and magnification options listed below. a b SPECS: Aluminum tube, anodized, matte black finish. 30mm tube diameter.
3.5-10x40
4.5-14x40
4.5-14x50 Illum Mil-Dot
4.5-14x50 IllumTMR
STOCK # MAGNIF. (mm) RETICLE WT. PRICE #526-518-500EN 3.5-10x40mm M3 Mil-Dot 21 oz. 4K1199D99 $ 1199.99 #526-000-149EN 3.5-10x40nn M5-FF Mil-Dot 19.5 oz. 1Z1499F99 $ 1499.99 #526-000-199EN 4.5-14x40mm Target Duplex 16 oz. 1Z749P99 $ 749.99 #526-000-150EN 4.5-14x40mm Tgt Mil-Dot 19.5 oz. 1Z899B99 $ 899.99 #526-000-064EN 4.5-14x50mm M1 Mil-Dot 22 oz. 4K1199K99 $ 1199.99 #526-000-151EN 4.5-14x50mm M1 Illum Mil-Dot 16 oz. 4K1399F99 $ 1399.99 #526-000-152EN 4.5-14x50mm M1 Illum TMR 22 oz. 4K1399K99 $ 1399.99 #526-000-153EN 6.5-20x50mm M1 Mil-Dot 22 oz. 4K1299E99 $ 1299.99 #526-000-200EN 6.5-20x50mm M1 TMR 22 oz. 4K1299H99 $ 1299.99 #526-000-154EN 6.5-20x50 M1 Illum TMR 22 oz. 4K1499A99 $ 1499.99 #526-000-155EN 8.5-25x50mm M1 Mil-Dot 22 oz. 1Z1399B99 $ 1399.99 #526-000-201EN 8.5-25x50mm M1 TMR 22.5 oz. 4K1399C99 $ 1399.99 #526-476-380EN 10x40mm M3 Mil-Dot 22 oz. 1Z1499M99 $ 1499.99
LUCID HD7 RED DOT SIGHT
Versatile Sight With 4 User-Settable Reticle Styles & 7 Brightness Settings
Red dot sight gives the user a choice of four different reticles based on the trajectory of a 55-grain 5.56 bullet. Reticle styles are: 2 MOA dot, circle dot, crosshair with holdover dots, and chevron with holdover dots. Automatic brightness setting adjusts to ambient light conditions; also has 7 user-selectable brightness settings. Integral mount clamps to standard Picatinny rail and gives proper height for lower one-third co-witness with iron sights. Unlimited eye-relief give you plenty of flexibility in mounting position. Elevation and windage knobs give 1/2 MOA adjustments, and covers are leashed to prevent loss in the field. SPECS: Cast aluminum frame. 51/2" (13.9cm) long, 3" (7.6cm) high, 21/2" (6.3cm) wide. 13 oz. (368g) wt. Runs on one AAA battery life, not included. Auto-shutoff after 2 hours. Battery life up to 1,000 hrs. #100-013-381EN Lucid HD7 Red Dot Sight, 2D189P00 � � � � � � � � � � � � � � � � � � � � � � � � $ 189.00
Rugged, High-Performance Optics; Models For 3-Gun, Tactical, Or Hunting Applications
1-4x24 MTAC Durable, high-quality 30mm riflescopes are built to provide you with the right optic for your specific application. Constructed from high-strength, aircraft-grade aluminum, each scope is Nitrogen-purged and quad-sealed for maximum protection against water, fog and shock-related damage. Precision-ground, index-matched glass is multi-coated with Burris’s HiLume™ coating to deliver sharp, highresolution images. Finger-adjustable/resettable Posi-Lock turrets feature a steel-on-steel design to ensure precise adjustments and a guaranteed zero – year after year. 1-4x24 MODELS - Impressive field-of-view - ideal for 3-gun, tactical, or other close-to mid-range applications. Low-profile target turrets maximize your peripheral view, while the 10 brightness-intensity setting, illuminated reticle ensures reticle visibility in any lighting condition. Ballistic CQ 5.56 reticle is optimized for the ballistic performance of 5.56 NATO ammunition, and features a 100-yard zero dot, plus aiming reference dots out to 600 yards. Combo Pak adds a Burris FastFire III red dot reflex sight for very close range targeting and an easy on/off P.E.P.R. QD scope mount. SPECS: Aluminum, hard-anodized, matte black. 30mm O.D. tube. 11.3" O.A.L. Eye relief: 3.5-4". FOV 100′ 100 Combo Pak w/FastFire III & yds – 1x; 32′ 100 yards - 4x. Windage/elevation adjustment range: 130 MOA in 1/2 MOA clicks. Uses CR-2032 P.E.P.R QD Mount battery, included. #118-000-047EN MTAC 1-4x24 Scope, 8A399J00� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 399.00 #118-000-048EN MTAC 1-4x24 Combo Pak w/FastFire & P.E.P.R., 8A599Q00 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 599.00
HIGHER MAGNIFICATION MODELS - Are great for longer range tactical or hunting applications, and include adjustable objectives for proper parallax adjustment. Available with easy-to-grasp, high-profile target turrets, and the mil-based, G2B Mil-Dot reticle that features hash marks placed between the dots for more precise aiming, ranging, and holdovers. a b SPECS: Aircraft-grade aluminum, matte black. 30mm O.D. tube. 50 yards to infinity parallax adjustment.
STOCK # MAG/OBJ. RETICLE ADJ. RANGE (IN. 100
YDS) CLICK VALUE EYE RELIEF
OAL/MOUNT LENGTH WEIGHT PRICE #118-000-049EN 3.5-10x42mm G2B Mil-Dot 80 / .10 mil. 3.1"-3.8" 13.1"/5.8" 17 oz./482g 8A449E00 $ 449.00 #118-000-050EN 4.5-14x42mm G2B Mil-Dot 64 / .10 mil 3.1"-3.8" 13"-5.9" 17.6 oz./499g 8A549M00 $ 549.00 #118-000-051EN 6.5-20x50mm G2B Mil-Dot 50 / .10 mil 3.1"-3.8" 14.5"-5.5" 18.2 oz./516g 8A699P00 $ 699.00
ELCAN AR-15/M16/M4 SPECTEROS4X COMBAT OPTICAL
SIGHTS
High-Performance, Super-Accurate Optic Calibrated For 5.56 NATO Ammunition
Fixed 4-power scopes are specifically engineered for 5.56 NATO ammunition to provide shooters with pin-point accuracy from 20 to 800 meters/yards. Rugged, aluminum housing and an integral base that attaches/detaches quickly to MIL-STD 1913 Picatinny rails with a flick of the easyto-operate throw levers. Knurled, sidemounted dial toggles 5 reticle brightness settings for your choice of center point illumination for close-range targeting, or complete reticle illumination allowing you to use the holdover marks in any light conditions. Glass-etched reticle is always visible and is night-vision compatible. A1 reticle has a “Chevron” center aiming point and holdover hash marks at 400, 500, 600, 700, and 800 meters. C1 reticle is a standard, crosshair-style reticle with a red highlighted center aiming reference, a target-size based rangefinder, and holdover hash marks at 300, 400, 500, 600, 700, and 800 meters. SPECS: Aluminum, hardcoat anodized, matte black. 6" OAL, 2.6" wide, 2.5" high. 18.2 oz. (515g) wt. 23/4" (7cm) eye relief. 32mm objective lens, 4x magnification. 120 MOA adjustment range, 1/2 MOA click value. Uses 1 DL 1/3N battery, included. Battery life: 600-3,000 hrs, depending on brightness setting. Waterproof to 66 ft. AN/PVS-22 night-vision compatible. #008-000-007EN SpecterOS4x, A1 Reticle, 8K1254P00 � � � � � � � � � � � � � � � � � � � � � � $ 1254.00 #008-000-006EN SpecterOS4x, C1 Reticle, 8K1254P00 � � � � � � � � � � � � � � � � � � � � � � 1254.00
GG&G EOTECH LENS COVER MODULE
Fast, Flip-Open Design; Protects The Lenses From Weather & Damage
Flexible rubber body with spring-loaded, ABS plastic covers help seal out dirt, dust and moisture to keep the lens surfaces of your EOTech holographic sight clean, scratch-free, and ready for use in all shooting conditions. Tabs on the right and left sides of the covers allow a fast, ambidextrous flip-open action with thumb or finger pressure. Front cover opens to near horizontal position to help block rain or sunlight. Rear cover folds back on top of the EOTech’s protective hood to ensure an unobstructed view through the sight. Body section installs under the EOTech protective hood, so it’s not even visible. Noise-absorbing neoprene pads dampen the sound of the rear lens cover contacting the hood during covert operations. a b SPECS: Rubber body, ABS plastic covers, neoprene pads, matte black. 1 oz. (28.4g) weight. Includes Torx wrenches for installation. 511/512/551/552 - 23/8" (5.9cm) long, 17/8" (4.8cm) wide, 17/16" (3.6cm) high. Fits EOTech models 511, 512, 551, and 552. XPS2/3 - 23/8" long, 2¼" (5.7cm) wide, 1½" (3.8cm) high. Fits EOTech models XPS2 and XPS3 only. #336-000-007EN EOTech Lens Covers, 6C35D71 � � � � � � $ 41.99 #336-000-038EN XPS2/3 Lens Cover, 6C39C29 � � � � � � � 49.99
CALL ANYTIME!! 800-741-0015
VISA/MC/Am Ex/Discover/CrossCheck/IMPAC/C.O.D.
Rugged, Mark AR MOD 1 scopes have variable power settings for fast, accurate engagement of close and distant targets. Perfect for AR-15s or traditional bolt-actions because the P5 BDC dial aids in precise aiming with .223/5.56 4-12x40mm NATO loads. Leupold’s Quantum Optical System™ and proprietary Multicoat 4® lens coatings combine to deliver optimal brightness, contrast, and edgeto-edge clarity in all light conditions. Purged with a unique Argon/Krypton gas blend, these scopes are waterproof and highly resistant to damage from shock. Duplex/Fine Duplex reticles are standard crosshair-style reticles. MilDot reticle is a standard mil-based reticle. FireDot SPR™ (Special Purpose Reticle) features an illuminated green center-dot with a range estimating circle, plus holdover hash marks out to 850 meters. FireDot TMR™ reticle has a green illuminated center-dot, plus windage and holdover hash marks to assist with longer-distance targeting. Both illuminated models feature 6 brightness-intensity settings for quick target acquisition – day or night. a b SPECS: 6061 T6 aluminum tube, matte black finish. 1" (2.5cm) O.D. tube. Illuminated models use a CR-2032 battery, included. AO - Adjustable Objective.
STOCK # MAG./OBJ. RETICLE ADJ. RANGE (MOA)/
CLICK VALUE EYE RELIEF
OAL/MOUNT LENGTH WEIGHT PRICE #526-000-184EN 1.5-4x20mm Duplex .125/ .1 mil 3.7-4.1" 9.5"/5.3" 9.6 oz./272g 4K00CDP $ 299.99 #526-000-185EN 1.5-4x20mm FireDot SPR .125/ .1 mil 3.7-4.1" 9.5"/5.3" 9.6 oz./272g 1Z00DVS $ 449.99 #526-000-186EN 3-9x40mm Mil-Dot 56E/52W/ .1 mil 3.6"-4.3" 12.6"/5.5" 12.4 oz./351g 1Z00LYF $ 349.99 #526-000-187EN 3-9x40mm Duplex 56E/52W/ .1 mil 3.6"-4.3" 12.6"/5.5" 12.4 oz./351g 4K00DBJ $ 299.99 #526-000-188EN 3-9x40mm FireDot TMR 56E/52W/ .1 mil 3.6"-4.3" 12.6"/5.5" 12.4 oz./351g 1Z449K99 $ 449.99 #526-000-189EN 4-12x40mm AO Fine Duplex .67/ .1 mil 3.7"-4.9" 12.4"/4.7" 14.9 oz./422g 4K00PER $ 449.99 #526-000-190EN 4-12x40mm AO Mil-Dot .67/ .1 mil 3.7"-4.9" 12.4"/4.7" 14.9 oz./422g 1Z00LPN $ 499.99 #526-000-191EN 6-18x40mm AO Fine Duplex .67/ .1 mil 3.7"-4.9" 13.5"/5.6" 15.3 oz./433g 1Z00BTS $ 499.99 #526-000-192EN 6-18x40mm AO Mil-Dot .67/ .1 mil 3.7"-4.9" 13.5"/5.6" 15.3 oz./433g 4K00MUK $ 549.99
LEUPOLD MARK 4® CQ/T® SCOPE
1-3x14mm Red Dot Scope For Tactical & Competition Use
Multi-function Close Quarters/Tactical scope combines the fast target acquisition of a red dot sight with the utility of 1-3x variable power magnification. Circle-dot reticle with built-in range estimating capability gives accurate hold-over and lead angle on moving targets; 11 illumination settings allow perfect contrast during any light condition. 1x magnification allows you to shoot with both eyes open; 2x and 3x magnification help you accurately engage targets out to 300 yards and beyond. Reticle runs on AA batteries up to 600 hours; when turned off the reticle turns black and remains visible. MIL-STD 1913 Picatinny rails on the top and right side accept small lights, night vision gear or laser designators. Includes flip-open lens covers. 1/2 MOA click adjustable for windage and elevation. A.R.M.S.® #12™ CQ/T Mount clamps the CQ/T scope to a flattop AR-15/M16 or any MIL-STD 1913 Picatinny base. Features quick on/off throw levers that maintain a consistent, repeatable zero. Mount ships directly from manufacturer� Please allow an additional 14 business days for shipping� a b SPECS: Aluminum tube, anodized, matte black. 8.8" (22.4cm) long. 2" to 2.8" (5.1 to 7.1cm) eye relief. 17.5 oz. (496g) wt. 1/2 MOA click adjustments. Dot size: 3 MOA at 3x, 9 MOA at 1x. Circle size at 3X: 18" at 25 yards, 6′ at 100 yards. Uses two AA batteries (not included). A.R.M.S.® #12™ CQ/T Mount – Aluminum and steel construction, matte black finish. 23/4" (7cm) long. #526-000-137EN Leupold Mark 4 CQ/T Scope, Only, 4K1099J99 � � � � � � � � � � � � � � � � � � � � � � $ 1099.99 #526-000-178EN Leupold Mark 4 CQ/T Scope w/ Built-In Mount, 1Z1199G99 � � � � � � � 1199.99 #100-004-860EN A.R.M.S. #12 CQ/T Mount, 3A135J69� � � � � � � � � � � � � � � � � � � � � � � � 145.00
LEUPOLD PRISMATIC RIFLE SCOPE
Combines The Speed Of A Red Dot With The Reliability Of A Traditional Scope
Compact, non-magnifying optic combines the fast target acquisition, accuracy, and low-light capability of a red dot sight with the reliability and clarity of a traditional rifle scope. Allows easy, both-eyesopen sighting that preserves depth perception and peripheral vision for quick reaction to changes in target. “Circle Plex” reticle combines a small center dot within a circle and traditional cross-hairs to provide a sight picture that will not obscure the target. Battery powered illumination module with 8 brightness settings clamps to the side of the tube and illuminates the reticle in red for maximum contrast with target. The etched reticle stays visible even if your battery dies, and the illumination module can be removed for minimal weight and bulk. Fully adjustable for windage and elevation in precise 1/2 MOA clicks, with a 70 MOA adjustment range. DiamondCoat 2™ lens treatment enhances light transmission and protects surface. Includes integrated base with three optional height spacers to enable mounting on almost any firearm with Picatinny rails. Also compatible with standard 30mm scope rings and A.R.M.S. #22 quick-detach throw-lever rings. Heavy duty, extra-thick walled tube, plus sealed, fogproof and waterproof construction stands up hard use. a b SPECS: Aluminum, anodized, matte black. 43/8" (11.1cm) long, 2" (5.1cm) maximum width with Illumination Module installed. 30mm diameter tube. 8.4 oz. (237g) weight without base. Eye relief: 3" (7.6cm). Uses (1) DL1/3N button-type battery, included.
Illumination Module removed
#526-000-090EN 1x14mm Tactical Prismatic Scope, Matte, 1Z499G99 � � � � � � � � � � � � � � � � � $ 499.99
rugged, No-Fail sight systems For Hunting, target shooting & tactical applications
Parallax-free aiming with a single, bright glowing red dot; proven to be the fastest, most accurate sighting system available. Exclusive Advanced Circuit Efficiency Technology (ACET) greatly improves the usable life of the single 3-volt battery. ACET sights can last nearly 50,000 hours (over five years on setting 7 out of 10) of constant use. AA battery model can last up to 80,000 hours with a single battery. All sight housings are machined or extruded from 6000 series aluminum for maximum strength without unnecessary added weight. Lens surfaces are optically ground (not cast) for superior clarity. Proprietary housing and lens sealing material keeps electronic and lens surfaces dry, fog-free and fully functional regardless of weather conditions. All models feature nonreflective, Mil-Spec anodized finishes.
Micro series - Ultra Compact to reduce weight and bulk, plus easy to remove and install on multiple firearms. Provides an easy-to-see, bright red LED aiming dot for hunting and tactical applications. Both models include an integral Weaver-style mount that attaches easily without knobs, and is keyed to the sight body to absorb recoil. Fully adjustable for windage and elevation; adjustment tool is an integral part of the adjustment knob caps so you never loose it. Micro H-1 is designed for hunting/sporting applications and is submersible to 15 feet. Can be mounted on shotguns, rifles, handguns, and bows, and includes 12 daylight settings and one extra-bright setting. Micro t-1 is designed for tactical use; includes band pass lens coating with 6 night vision/7 daylight settings, so it’s fully compatible with all generations of Night Vision Devices, and submersible to 80 feet. Features integral Picatinny base. SPECS: Anodized, matte black. 2.4" (6.2cm) long x 2.4" wide x 1.6" (3.6mm) high, including mount. 3.7 oz. (105g) wt including mount. 1X magnification. Both models available with 2 or 4 MOA dot (see below). 1/2" adjustment 100 yds (13mm 100m). 50,000 hrs (5+ years) continuous use on one CR-2032 lithium battery. #100-003-004EN Micro H-1, 4 MOA, 7A617D00 � � � � � � $ 617.00 #100-009-907EN Micro H-1, 2 MOA, 7A617K00 � � � � � � 617.00 #100-003-003EN Micro t-1, 4 MOA, 7A691F00 � � � � � � � 691.00 #100-009-905EN Micro t-1, 2 MOA, 7A691E00 � � � � � � � 691.00
Micro H-1 W/ar-15 FLattop MoUNt - AR-specific version of the popular Micro H-1 has an integral, quick-release riser mount, ready to install on any AR-15/M16/M4 flattop rifle. Riser aids in comfortable, heads-up aiming, while providing the correct elevation to co-witness with mil-spec “iron” sights. Positions the backup sights in the lower 1/3 of the Micro’s field of view for instant transition to them. Quick-detach LRP (Lever Release Picatinny) mount lets you remove the H-1 from the rifle with a flip of the locking lever and return it without loss of zero. SPECS: Aluminum, anodized finish, matte black. 2.4" (6.1cm) long, 1.6" (4.1cm) wide, 2.6" (6.7cm) high, including mount and spacer. 6 oz. (170g) wt. #100-006-838EN Micro H-1 w/ar-15 Mnt, 7A695Q00� � � � � � � � � � � � � � � � � � � � � � � � $ 695.00
9000 series - 9000sc is a mediumlength sight that has a 4 MOA dot with nine daylight brightness settings. 30mm exterior tube diameter helps provide wide field of view and eye relief, plus parallax-free aiming at all distances. 9000L has a longer body tube for more flexibility in ring spacing. 1x magnification with a 2 MOA dot and 9 daylight settings. SPECS: Anodized finish, matte black. 2.2" (5.5cm) wide. 9000SC - 6.3" (16cm) long; 9000L - 7.9" (20cm) long. Windage & Elevation: 1/2" adjustment 100 yds. (13mm 100m). ACET = 50,000 hrs on one battery. Includes lithium battery (3v, CR 1/3N), rubber flip-up lens covers, two (2) 30mm Weaver-style mounting rings and Allen wrench. Minimum/Maximum C-To-C Ring Spacing: 9000SC - 2" (5cm)/4.5" (15cm); 9000L - 2.4" (6cm)/6.1" (15.5 cm). #100-002-968EN 9000sc 4 Moa, 7A406Q00� � � � � � � � $ 406.00 #100-002-972EN 9000L 2 Moa, 7A406N00 � � � � � � � � � 406.00
coMpc3 series - Compact red dot sight with 2 MOA dot for up-close shooting that demands both speed and accuracy. Built to the same exacting tolerances as the entire Aimpoint line for fail-proof performance. Short length allows easy mounting for a variety of applications; 30mm Weaverstyle ring is included. Has nine daylight brightness settings, removable lens covers, dial covers, and a cushioned, rubber ocular lens. SPECS: Anodized, matte, black. 4.7" (12cm) long x 2.2" (5.5cm) wide x 2.2" high. 7.1 oz. (200g) wt. Windage & Elevation: 1/2" adjustment 100 yds (13mm 100m). ACET = 50,000 hrs on one battery. Includes lithium battery (3v, CR 1/3N). Includes 30mm Weaver-style mounting ring and Allen wrench. Submersible to 15 feet (5m). #100-002-976EN compc3 2Moa, 7A460P00 � � � � � � � � $ 460.00
coMpM3/coMpML3 series - compM3 provides up to five years of constant power-on usage from a single battery. Band pass coated objective lens is fully compatible with all generations of night vision devices, especially 3rd generation NV technology. compML3 includes multi-layer, anti-reflective lens coatings designed for low light or daylight tactical operations without NV capability. Both models available with a 2 MOA dot; CompML3 also available with a 4 MOA dot for close combat applications. Requires an Aimpoint 30mm ring or equivalent for installation (available separately). SPECS: Anodized finish, matte black. 5.1" (130 cm) long x 2.2" (5.5cm) wide. 7.8 oz. (220 g) wt. 1X magnification. Windage & Elevation: 1/2" adjustment 100 yds (13mm 100m). ACET = 50,000 hrs on one battery on daylight setting, 500,000 hrs on NV setting (CompM3 only). Includes lithium battery (3v, DL 1/3N), rubber flip-up lens covers and rubber sight body shield. Submersible to 150 feet (45m). #100-002-963EN compM3, 2 MOA, 7A616P00 � � � � � � � $ 616.00 #100-002-964EN compM3, 4 MOA, 7A586L00 � � � � � � � 586.00 #100-002-965EN compML3, 2 MOA, 7A526N00 � � � � � 526.00 #100-002-966EN compML3, 4 MOA, 7A526K00� � � � � � 526.00
coMpM4/coMpM4s - The latest civilian version of the U.S. Army’s M68 CCO (Close Combat Optic), with super-efficient electronics deliver up to eight years of continuous use from a single AA battery. Band pass objective lens coating gives superb light transmission and optimum 3rd generation NVD compatibility. Rotary brightness switch with 7 NVD settings and 9 daylight settings, plus one extra-bright setting for outdoor use with anti-reflective goggles. Integral, QRP2 mount (no additional mount ring required) has a single, oversized thumbscrew for fast installation and removal from Picatinny rails. Includes a vertical spacer for fast adaptation to a wide range of firearms. Available with versatile 2MOA dot. Convert to a 3x longrange red dot scope by installing the optional 3XMag magnifying module listed below. compM4s has the same operating features as the CompM4 with battery compartment positioned low, on the right side of the unit, for improved view over the top of the optic. SPECS: Anodized finish, matte black. 4.7" (120 cm) long x 2.8" (7.2m) wide x 2.8" high. 11.8 oz. (335 g) wt. including mount. 1X magnification. Windage & Elevation: 1/2" adjustment 100 yds (13mm 100m). ACET = 80,000 hrs on one battery on daylight setting, 500,000 hrs on NV setting. Includes alkaline battery (1.5v, AA). Submersible to 150 feet (45m). #100-003-002EN compM4 2Moa, 7A829A00� � � � � � � � $ 829.00 #100-003-734EN compM4s 2Moa, 7A829M00 � � � � � � 829.00 3XMaG MaGNiFier - Mounts on a Picatinny rail directly behind any Aimpoint red dot optical sight to provide 3X magnification for improved accuracy when engaging small targets at long ranges. Rubber housing shields the module from damage caused by shock. Mounts to rail using a 30mm scope ring or the quick-detach Aimpoint TwistMount listed below. Mounting/dismounting will not change sight point-of-impact; internally adjustable to align with sight. SPECS: Aluminum, anodized, dark grey, rubber coated, black. 4.3" (11cm) long x 1.7" (4.4cm) high, 1.6" (4.1cm) diameter. 7.1 oz. (200g) wt. Submersible to 67 feet (20m). Requires 30mm mounting ring for installation. #100-002-981EN 3XMag Magnifier, 7A608J00 � � � � � � � $ 608.00
tWistMoUNt For 3X MaGNiFier - Quickdetach mount for Aimpoint 3x Magnifier lets you change instantly from long-range to CQB mode. Depress the release lever, twist the Magnifier, and lift it off for an unencumbered close-range sight picture. Low-profile base clamps to Picatinny-style rail; extra-long scope ring provides ample surface contact for a no-slip grasp on the magnifier body. May also be used as a quick-detach mount for other 30mm optics. Extra TwistMount bases sold separately, so you can quickly move your Magnifier from one rifle to another. co-Witness spacer raises sight axis for proper co-witnessing with factory-height backup iron sights. Comes with four, extra-length hex head screws and Allen wrench. SPECS: Aluminum, hardcoat anodized, matte black. #100-003-597EN twistMount complete, 7A189N00 � � � � � � � � � � � � � � � � � � � � � � � � $ 189.00 #100-003-599EN twistMount Base, only, 7A120H00 � � � � � � � � � � � � � � � � � � � � � � � � 120.00 #100-004-137EN co-Witness spacer, 7A30M00� � � � � � 30.00
teNeBraeX KiLLFLasH® arD - Anti-Reflection Device screws into front lens opening of 9000SC and Comp series sights. Honeycomb filter disperses light to prevent reflections from front lens giving away your position without affecting sight picture. SPECS: Polymer, black. Fits 9000SC and Comp series sights. #100-003-624EN KillFlash® arD, 7A41H00� � � � � � � � � � � � $ 41.00
repLaceMeNt LeNs coVers - Factory original parts. Flip-Up covers – Springloaded polymer covers flip open with finger pressure. Available in black or seethrough clear Tight, friction-fit installation. Fit non-magnifying (1x) 9000 and Comp series, including C3, MPS3, and M4/M4S. Rear covers fit all Aimpoints with 30mm rear objectives, including Comp and 9000 series. Military – One-piece, rubber, slip-on style with loop that fits over quick-release knob on QRP and QRW mounts. Fits Comp M2, ML2, M3, ML3, M4, and M4S. Micro – One-piece, rubber, “bikini”style cover for Micro series sights. #100-003-612EN Flip-Up Front cover, Blk, 7A19Q00 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 19.00 #100-003-618EN Flip-Up Front cover, Clear, 7A19J00 � 19.00 #100-003-616EN Flip-Up rear cover, Blk, 7A19C00 � � � � � � � � � � � � � � � � � � � � � � � � � � 19.00 #100-003-621EN Flip-Up rear cover, Clear, 7A19D00 � 19.00 #100-003-623EN Military Lens cover, 7A12I00 � � � � � � � � 12.00 #100-003-625EN Micro Lens cover, 7A19N00� � � � � � � � � 19.00
repLaceMeNt DL1/3N BatterY - Factory recommended lithium battery fits 9000 series, CompC/M/ ML series, 1000 series, 3000 series, 5000 series, 7000 series, Comp, CompC, Comp XD, CompM, CompM XD, CompML, CompML XD. #100-005-215EN DL1/3N Lithium Battery, 5Z4N75 � � � � � �$ 4.99 Front Focal plane reticles For superb cQB & Long-range Versatility
Mark 6 scopes have 34mm main tubes and feature mil-based Zer- Mark 6 6x20 oLock™ windage and elevation dials that prevent unintentional adjustments in the field. They are available with different styles of ranging reticles located on the front focal plane (FFP), so the subtensions remain true at all magnifications. The 1-6x20mm allows both-eyes-open shooting without magnification, with the ability to zoom up to 6x for longer shots. It’s available with the illuminated TMR (Tactical Milling Reticle), the CMR-W 5.56 reticle calibrated for military M855 ammo at 900 yards, the CMR-W 7.62 reticle calibrated for 175 grain .308 loads out to 1,200 yards. The 3-18x44mm scope is available with the CMR-W 7.62 reticle, the illuminated TMR, or the Horus H58 mil-based reticle. TMR models require a battery, included, and do not have the FFP feature. a b SPECS: Aluminum housing, hard-finished, matte black. 34mm O.D. tube. 1-6x20mm - 10.3" long. 5" mounting space. 3.7" eye relief. 17 oz. wt. 3-18x44mm - 11.9" long. 5.3" mounting space. 3.8" eye relief. 23.6 oz. wt. #526-000-177EN Mark 6 1-6x20mm, CMR-W 5.56 FFP Reticle, 4K2199D99 � � � � � � � � � � � � � � $ 2199.99 #526-000-202EN Mark 6 1-6x20mm, CMR-W 5.56 FFP Reticle, 1Z2199M99 � � � � � � � � � � � � � � 2199.99 #526-000-179EN Mark 6 1-6x20mm, TMR, 1Z2199B99� � 2199.99 #526-000-203EN Mark 6 1-6x20mm, TMR, 1Z2529L99 � � 2529.99 #526-000-204EN Mark 6 3-18x44, TMR, 1Z2199N99 � � 2199.99 #526-000-205EN Mark 6 3-18x44, H58 FFP Reticle, 1Z2599P99 � � � � � � � � � � � � � � � � � � � � � � 2599.99
Models
NIGHTFORCE SHV RIFLESCOPES
premium scope performance at More affordable price
SHV scopes offer the same renowned Nightforce performance in a more affordable package. Featuring 56mm objective lens and a 30mm tube, the SHV delivers exceptional light transmission, with magnification ranges that are ideal for most applications. Fast-focus European style eyepiece quickly gets you on target. Reticles are available in IHR German-Style and MOAR range-finding reticle, and can be either illuminated or non-illuminated. Illuminated reticles use CR2032 battery, included. Capped windage and elevation turrets are finger adjustable. Adjustments are in ¼ MOA clicks. SPECS: Eye Relief: approx. 3.1" - 3.5". 4-14x56 - Adj. range: 100 MOA elevation, 70 MOA windage in ¼ MOA clicks. FOV: 24.9′ 100 yards (4x). 14.8" OAL. 28.5oz (illuminated), 26.9oz (non-illuminated) wt. 5-20x56 Adj. range: 80 MOA elevation, 50 MOA windage in ¼ MOA clicks. FOV: 17.9′ ft. 100 yards (5x). 15.2" OAL. Approx. 30 oz. wt. #524-000-156EN sHV 4-14X56 iHr, 4B00MVR � � � � � � � � � � � � � � � � � � � � � � � � $ 975.00 #524-000-158EN sHV 4-14X56 iHr illuminated, 4B1106B00 � � � � � � � � � � � � � � � � � � � � � � � 1106.00 #524-000-157EN sHV 4-14X56 Moar, 4B00CYC� � � � � � � � � � � � � � � � � � � � � � � � � 975.00 #524-000-159EN sHV 4-14X56 Moar illuminated , 4B1106J00 � � � � � � � � � � � � � � � � � � � � � � � 1106.00 524-000-186EN sHV 5-20x56 iHr, 4B1171E00� � � � � � � � � � � � � � � � � � � � � � � � 1171.00 524-000-188EN sHV 5-20x56 iHr illuminated, 4B1299A00 � � � � � � � � � � � � � � � � � � � � � � � 1299.00 524-000-187EN sHV 5-20x56 Moar, 4B1171A00� � � � � � � � � � � � � � � � � � � � � � � � 1171.00 524-000-189EN sHV 5-20x56 Moar illuminated, 4B1299A00 � � � � � � � � � � � � � � � � � � � � � � � 1299.00
