AR-15/m16
A.R.M.S. AR-15/M16
THROW LEVER OPTIC MOUNTS
INTEGRAL MOUNTING SYSTEM
For Quick-Detach Mounting Of Popular Optics To Flattop Rifles
Flattop-Mounted Bases With Interchangeable Modular Ring/Riser Options
Compact, quick-detach mounts clamp directly to AR-15/M16/ M4 flattop receiver rail for solid, ultra-secure attachment of optics and holographic sights. The strong, yet lightweight aluminum base is secured to the rail by steel throw levers and locking feet, while a recoil lug locks into one rail slot to prevent unwanted sight movement under recoil. Quick-release levers close securely against the side of the mount to prevent snagging on other objects, yet release easily when you want to remove the sight and mount as one unit without loss of zero. a b
Machined aluminum mounts clamp directly to a MIL-STD 1913 Picatinny flattop rail to raise the scope and push it forward, eliminating the need for separate risers or specialized short eye relief optics. Slides into place and secures with steel crossbolts that hold tight. a b
ACOG MOUNT - Adaptermount lets you easily install a Trijicon® ACOG scope designed for carry-handle rifles on a flattop receiver. Compact size keeps weight to a miniLever mum. Raises the ACOG .275" Dual ACOG above the receiver rail. SPECS: Aluminum rail, hardcoat Single Lever ACOG anodized, matte black; steel lever, oxide finish, matte black. 311/16" (9.4cm) long. 2.5 oz. (72 g) wt. #100-003-311EN ACOG Mount, 3A115I00 ���������������������� $ 119.99 #22M68 AIMPOINT COMP MOUNT - Compact, single-ring mount for Aimpoint CompML, CompML2, CompML3, or similar red dot sight requiring a single 30mm ring. The top half of the ring is machined steel for superior strength and secured by four hex-head screws (wrench included) to ensure full contact with the sight body. Spacer raises the Aimpoint Comp Mount Aimpoint Comp 1 /2" for co-witness with iron sights when mounting directly to flattop receivers. Can also be used on #22TX30 Trijicon Tri-Power Mount. SPECS: Mount - Hardcoat anodized aluminum and Parkerized steel, matte black. 25/16" (5.6 cm) long. 3.9 oz. (109 g) wt. Spacer – Aluminum, hardcoat anodized, matte black. 2.3" (58mm) long, .54" (13 mm) high. 1 oz. (28g) wt. Mounting screws included. #100-003-314EN Aimpoint Comp Mnt, 3A95J17 ���������� $ 109.00 9.99 #100-004-815EN 1/2" Mount Spacer, 3A9Q24 ������������������ #63 RISER MOUNT - Quick-detach riser mount provides 3/4" (1.9cm) additional height for mounting optics with large objective lenses. Compatible with STANAG mounts and features a seethrough tunner that allows continued use of iron sights. SPECS: Aluminum rail, hardcoat anodized, matte black; steel levers, oxide finish, matte black. 53/8" (13.7 cm) long. 4.5 oz. (128 g) wt. #100-003-313EN Riser Mount, 3A137N00 ���������������������� $ 145.00
M & A AR-15/M16
FLAT TOP SCOPE MOUNT Integrated Mount & Rings For Rugged Strength
OPTIC MOUNTS
LEUPOLD AR-15/M16
One-piece mount provides strong, secure scope attachment that withstands the bumps and knocks of hard tactical use. Positions scope well above flattop receiver for easy heads-up aiming. Each ring is 11/8" long for maximum contact with scope body, and caps have four hex head clamping screws for recoil-proof holding power. Two, steel, thumb screws and full-length clamping bar securely lock mount to Picatinny receiver rail. Rounded contours and radiused edges resist snagging on other gear. Machined aluminum keeps weight to a minimum. Models available to fit 1" and 30mm scope bodies. a b SPECS: Aluminum, hardcoat anodized, black, matte finish. 51/8" (13cm)
92
PAGE
MARK 1/MARK 2 RAILS Eleven MIL-STD 1913 Picatinny cross-slots on top offer plenty of flexibility in Mark 1 Rail Mount ring spacing. Mark 1 locks into place on the receiver with two, flush-fitting T-15 Torx® screws. Mark 2 rail provides the same advantages as the Mark 1, with the added benefit of easy-to-grasp 1/2" hex nuts on the crossbolts for quick-release removal and re-install without loss of zero. Mark 2 Rail Mount SPECS: Aluminum, hardcoat anodized finish, matte black. Steel crossbolts. 51/2" (14cm) long. #526-000-157EN Mark 1 Rail Mount, 4K40F26 �����������������$ 50.99 #526-000-158EN Mark 2 Rail Mount, 4K69N87 ����������������� 77.99 MARK 2 INTEGRAL MOUNTING SYSTEM - Uses the same clamping system as the Mark 1 and adds builtin scope rings with the correct elevation for proper eye alignment with the scope – no need for a separate riser assembly. Cantilever on the front ring lets you position the scope far enough forward for comfortable eye relief. Models available for 1" or 30mm diameter scope tubes. SPECS: Aluminum, hardcoat anodized, matte black. Steel crossbolts. 51/2" (14cm) OAL. #526-000-159EN Mark 2 Integral Mounting System, 1" Rings, 4K90B04 ���������������������������������� $ 105.99 #526-000-160EN Mark 2 Integral Mounting System, 30mm Rings, 4K90F04 ������������������������ 105.99 MARK 4 INTEGRAL MOUNTING SYSTEM - Versatile cantilever mount gives you maximum adaptability with modular components, each sold separately. The Mark 4 Base clamps securely to the receiver rail with a pair of hex head crossbolts and accepts the Scope Ring Insert unit that contains both scope rings. The insert’s position can be adjusted on the base to accommodate different eye relief requirements. Add the 20 MOA Riser Insert between the base and ring insert to provide additional elevation for addressing long-range targets without exceeding your scope’s elevation adjustment or resorting to holdover. SPECS: Aluminum, hardcoat anodized, matte black. Steel crossbolts. 53/4" (14.6cm) long. #526-000-161EN Mark 4 Integral Mounting System, Base, 4K71G09 ���������������������������������������� $ 77.99 #526-000-162EN Mark 4 20 MOA Riser Insert, 4K43A79 ���������������������������������������������������� 50.99 #526-000-163EN Mark 4 Ring Insert, 1", 4K86Q44 ���������� 100.99 #526-000-164EN Mark 4 Ring Insert, 30mm, 4K86C44 ���������������������������������������������������� 100.99
O.A.L.. Height measured from top of rail to bottom of ring. 1" - 1.18" (2.99cm) high, 10.7 oz. (303g) weight; 30mm - 1.14" (2.89cm); 10 oz. (283.5g) weight. #553-000-005EN Flattop Scope Mount, 1", 3E45D26 �������$ 53.99 #553-000-007EN Flattop Scope Mount, 30mm, 3E45P26 ����������������������������������������������������� 53.99
GG&G AR-15/M16
NIGHTFORCE AR-15/M16
QUICK-DETACH OPTIC MOUNTS
UNIMOUNT
Items
Rock Solid, Quick-Detach Mounts With Repeatable Accuracy Quick-detach mounts provide a rock-solid platform for a variety of optical sights on Picatinny flattop rails. GG&G's innovative Accucam latch system provides quick removal and installation in just seconds while maintaining 1/2 MOA repeatable accuracy. Plus, it's tension adjustable for a solid fit even on out-of-spec rails. All mounts are precision machined from 6061 T6 aluminum and hardcoat anodized for added durability; clamping systems are 4140 steel for maximum strength. Non-reflective matte black finish. a b ACCUCAM MOUNT w/INTEGRAL 30mm RINGS - Designed specifically for the AR weapon platform with rings spaced 4.400" center-to-center for excellent eye relief adjustment. Height from top of dovetail to centerline of ring is 1.400" for good cheekweld. Top ring straps secured with four Allen head screws for recoil-proof hold. 5" (12.7cm) long x 23/16" (5.6cm) wide. #336-000-012EN Accucam Mount w/30mm Rings, 6C203L99 ������������������������������������������������ $ 203.99 AC-30 ACCUCAM MOUNT w/30mm INTEGRAL RINGS - Gives the shooter additional eye relief when crouching, sitting, or prone position. Tall enough to provide clearance for large objective lenses on long-range rifle scopes, while skeletonized frame reduces weight. Not recommended for use on .50 BMG. 5" (12.7cm) OAL, 4" (10.2cm) mounting base length. 3 3/4" (9.5cm) inside ring-to-ring 336-000-054EN AC-30 Accucam Mount w/30mm Integral Rings, 6C214N99 ����������������� $ 214.99 FLT ACCUCAM MOUNT - Designed to meet the needs of SPR shooters, with 30mm integral rings, this mount permits forward scope mounting and positions the scope 11/2" further forward than standard GG&G scope mounts. 5" (12.7cm) OAL. 33/4" (9.5cm) inside ring-to-ring. 336-000-055EN FLT Accucam Mount, 6C204E99 ������$ 204.99 ACCUCAM LEVER FOR EOTECH - Camoperated quick-detach lever replaces existing thumbnut mounting screw on EOTech sights for rapid installaton and removal. Does not change the mounting height of EOTech and allows co-witnessing with iron sights. 500 Series fits EOTech models 511, 512, 551, and 552. XPS Series fits EOTech XPS2 and XPS3 sights. #336-000-017EN Accucam Lever For EOTech 500 Series, 6C78I87 ���������������������������������������� $ 86.99 #336-000-041EN Accucam Lever For EOTech XPS Series, 6C78H87 �������������������������������������� 86.99 ACCUCAM MOUNT FOR TRIJICON ACOG - Low-profile, steeland-aluminum mount attaches directly to the body of the ACOG with two large Allen head screws for a rock-solid installation. Cam-operated quick-detach lever allows easy removal and installation of sight. Fits all standard and compact ACOG scopes designed for mounting to flattop receivers. #336-000-018EN Accucam Mount For ACOG, 6C119I86 �������������������������������������������������� $ 138.99 ACCUCAM BASE W/PICATINNY RAIL Gives quick-detach capability to any scope you mount on your flattop AR. Topside slots are machined to true MIL-STD 1913 specs to accept any Picatinny scope rings. Mount also elevates the scope an extra 1/2" above the receiver. #336-000-011EN Accucam Base w/Picatinny Rail, 6C145M83 ������������������������������������������������ $ 149.99
SATISFACTION GUARANTEED
SINCE 1939
Solid, Yet Easily Detachable One-Piece Scope Mount For Your Flattop Quick-attach/detach flattop scope mount is designed to stay permanently installed on the scope at all times. Quick-release hex nuts make it easy to remove it from the rifle to swap onto a different rifle or replace with a different optic. A built-in 20 MOA elevation maximizes long-range capability. Machined from strong, rigid 7075-T6 aluminum to precise tolerances to ensure the scope is not subjected to stress, torquing, or bending as the ring screws are tightened. Titanium crossbolts and jaws hold securely to the rifle’s MIL-STD 1913 Picatinny without adding excess weight. Micro-radiused and inside edges honed to prevent the rings from scratching the scope tube. a b SPECS: Machined 7075 T6 aluminum, hardcoat finish, matte black. Accepts scopes with 30mm O.D. tubes. Clamping footprint: 2.725" of rail space. Heights measured from top of receiver rail to centerline of scope. #749-012-016EN UniMount High (1.125"), 2E00KKC �������������������������������������������������� $ 252.00 #749-012-017EN UniMount Extra High (1.375"), 2E00HUD ������������������������������������������������ 252.00
JP ENTERPRISES AR-15/M16
FLATTOP OPTIC MOUNT Integral Offset Rings For Rock-Solid Mounting One-piece, aluminum mount with integral rings is precision machined to true MIL-STD 1913 Picatinny specs for a secure fit on flattop receiver rails. Ring height and forward offset are ideal for use with long eye relief scopes. Mounts available for 1"/30mm, 34mm, and 35mm scope tubes. 1"/30mm mount accepts scopes with both 30mm tubes and, using the included polymer adapter shims, 1" tubes. Torx® head screws (4 on 1"/30mm, 6 on 34mm and 35mm) secure each top ring strap to hold the optics tight under heavy recoil. Full-length base clamps to the receiver with five, equally spaced crossbolts for a rock-solid fit and zero movement. a b SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Includes instructions and T15 and T20 Torx wrenches. 1"/30mm - Approximately 51/2" (14cm) long, 13/4" (4.4cm) wide, 21/8" (5.4cm) high. 7.1 oz. (201 g) weight. Elevates a 30mm optic .965" (24.5mm), measured from top of receiver rail to bottom of scope. 34mm & 35mm - 53/4" (14.6cm) long, 115/16" (4.9cm) wide, 21/2" (6.3cm) overall height. 7 oz. (198g) weight. Height .760" (1.9cm), measured from top of receiver rail to bottom of scope tube. #452-000-044EN 1"/30mm Flattop Optic Mount, 2E154F29 ���������������������������������������������������$ 170.95 #452-000-124EN 34mm Flattop Optical Mount, 2E154M29 ������������������������������������������������� 170.95 #452-000-125EN 35mm Flattop Optical Mount, 2E192C86 ������������������������������������������������� 213.71
The Brownells Guarantee!
If you aren’t completely, 100% satisfied with any purchase you receive from Brownells, for any reason, at any time, return it for a full refund or exchange. Your complete satisfaction is what’s most important to us.
Office/Tech: 641-623-5401
