See

Dedicated Flash suppressor or Comp/Flash suppressor Combo; aggressive Front end Cuts For CQB Maneuvers

pHantoM FLasH suppressor - Longitudinal ports help minimize the blinding effects of muzzle flash in low light for improved target acquisition during night operations. Screw-on design for threaded barrels only. Includes crush washer for proper timing of vents. Deeply serrated notches at the tip provide extra insurance in hand-to-hand combat. Integral rings at the base accept military sound suppressors and allow mounting of Blank Firing Attachments (BFAs) for training exercises. a b SPECS: Steel, mil-spec phosphate coating. For rifles chambered in .223/5.56 NATO with 1/2"-28 tpi muzzle threads. 21/4" (5.7cm) long. 7/8" (2.2cm) O.D. #100-002-070EN phantom Flash suppressor, 9A25G10 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 28.50

pHantoM 5C1 CoMp/FLasH suppressor - Flat, non-serrated muzzle face helps prevent catching or snagging muzzle tip during storage or deployment. Five, longitudinal vents help hide flash while dispersing gases up and outward; tames muzzle rise and keeps your front sights on target. Outward facing ports and solid panel on bottom help eliminate dust signature when shooting in the prone position. For threaded barrels only, includes crush washer. .223 model has grooved, base rings that accept training attachments and sound suppression devices for LE and military personnel. SPECS: Steel, mil-spec phosphate coating. .223 - 1/2"- 28 tpi. 21/4" (5.7cm) long, 7/8" (2.2cm) diameter. 2.1 oz. (60 g) wt. .308 - 5/8"-24 tpi. 215/16" (7.5cm) long. 1" (2.5cm) diameter. 4.5 oz. (127g) wt. #100-002-859EN .223 5C1 Comp/Flash suppressor, 9A25F50 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 28.50 #100-003-228EN .308 5C1 Comp/Flash suppressor, 9A36H20 � � � � � � � � � � � � � � � � � � � � � � � � � � 44.60

pHantoM 5C2 CoMp/FLasH suppressor - Five, straight, longitudinal vents hide flash while dispersing gases up and outward to tame muzzle rise. No downward facing port helps eliminate dust signature when shooting in the prone position. For threaded barrels only, includes crush washer. .223 and 6.8 spC models have grooved base rings that accept training attachments and sound suppression devices for LE and military personnel. Chisel-shaped front notches keep muzzle planted on your attacker during CQB situations. SPECS: Steel, mil-spec phosphate coating. .223 - 1/2"-28 tpi. 6.8mm spC - ½"-36 tpi. Both are 21/4" (5.7cm) long, 7/8" (2.2cm) diameter. 2.1 oz. (60 g) wt. 6.8mm SPC muzzle thread pattern will also fit on 7.62x39 and 9mm. .308 - 5/8"-24 tpi. 215/16" (7.5cm) long. 1" (2.5cm) diameter. 4.5 oz. (127g) wt. #100-002-071EN .223 5C2 Comp/Flash supp., 9A21G43 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 28.50 #100-003-229EN .308 5C2 Comp/Flash supp., 9A38J50 � � � � � � � � � � � � � � � � � � � � � � � � � � 44.60 #100-010-688EN 6.8 spC 5C2 Comp/Flash supp., 9A23J20 � � � � � � � � � � � � � � � � � � � � � � � � � � 29.99

5/8 " CrusH WasHer - Precision machined steel washer ensures exact alignment of flash suppressors and other muzzle accessories that require a washer. Fits AR-style .308 rifles with 5/8" threaded muzzles. SPECS: Steel, blued. 5/8" (.625"/1.59cm) I.D. 13/16" (.813"/2.06cm) O.D. #100-003-123EN 5/8" Crush Washer, 9A2K99 � � � � � � � � � � � �$ 3.00 gives a smoother pull While preserving reliability

Trigger/hammer kits feature rugged military-type components carefully prepped to give a smoother trigger pull while maintaining the original geometry for maximum reliability. These are “enhanced standard” triggers, so the armorer continues to work with the configuration he’s accustomed to. The QMs (Quality Mil-Spec) set has the sear contact surface precisionhoned to smooth and lighten Trigger Set with Parts Kit the pull to around 61/2 lbs. The aCt (ALG Combat Trigger) adds nickel-boron coating on the trigger and nickel-Teflon coating on the hammer, disconnnector, and pins to increase surface hardness and reduce friction, with an average pull weight of about 6 lbs. Both kits also available with a DPMS Lower parts kit that includes all the internal parts you need to install a complete fire-control system with a QMS or ACT trigger. a b SPECS: Hammer/trigger – 8620 steel. Disconnnector – 1070 high-carbon steel. Hammer/trigger pins – heat treated 4140 chrome-moly steel. Both kits contain trigger, trigger spring, hammer, hammer spring, disconnnector, disconnnector spring, hammer and trigger pins, and instructions. #100-009-796EN QMs ar-15 trigger set, 8Z00IAP � � � � $ 45.00 #100-010-634EN QMs ar-15 trigger set w/parts kit, 8Z68E86 � � � � � � � � � � � � � � � � � � � � � � � � � � 74.99 #100-009-797EN aCt ar-15 trigger set, 8Z00HBF � � � � 65.00 #100-010-635EN aCt ar-15 trigger set w/parts kit, 8Z88E86 � � � � � � � � � � � � � � � � � � � � � � � � � � 94.99

2-Stage

CMC TRIGGERS AR-15 TACTICAL TRIGGER GROUP

Drop-in trigger Module is Factory tuned For a super-smooth, Clean-Breaking pull

Self-contained, drop-in trigger module replaces the heavy factory trigger found in many commercial AR-15s and delivers a crisp, clean pull. Designed by competition shooter Chip McCormick to provide all the advantages of a fine, match-grade, single-stage trigger without having to fit and adjust multiple components. Rigid, steel, trigger housing holds all the factory-tuned, internal components in proper alignment for easy, fast installation. Generous, precisionground sear/hammer engagement surfaces provide a remarkably clean, crisp release while preserving reliable function. Each trigger assembly is tweaked at the factory to minimize take-up and overtravel. Threaded sleeves provide ultra-smooth pivot surfaces for the hammer and trigger. Two, slightly oversized center pins replace the standard, trigger/hammer pins to save wear, reduce friction, and prevent trigger wobble; E-clips at both ends prevent pin walk. single-stage gives a pre-set 31/2 lb. pull. two-stage has a 1 lb. initial stage, with a second stage that releases at 3 lbs. Both are available with traditional Curved trigger shoe, or skeletonized Flat shoe that provides a different feel some shooters prefer and gives your AR a distinctive look. a b SPECS: Hammer/Trigger - Steel, blued finish. Housing - Steel, in-thewhite. Includes (2) center pins w/E-clips. Fits AR-15 with .154" diameter trigger and hammer pins.

AMERICAN TRIGGER CORP AR-15/M16/AR-STYLE .308 GOLD TRIGGER MODULE

Drop-in Fire Control system gives a Light, safe, Match-grade pull

Self-contained trigger/assembly installs in minutes and delivers a light, smooth, match-grade trigger pull free of grittiness, with an ultra-crisp letoff and short reset. Simply remove factory trigger and safety selector, drop in the module, reinstall selector and pins, and you’re ready to shoot. Completely new engagement geometry produces a light 3-lb. pull and crisp release without compromising reliability or safety. The two-stage design is adjustable for sear engagement, with a first-stage takeup of approximately 6 ounces, followed by actual sear movement taking up the rest of the weight—the reverse of the military two-stage AR trigger pull profile. Instead, the shooter can build force steadily, maintaining precise control and keeping his attention on the target. After release, reset travel is only .030", less than half the .070" typical of standard match triggers, to aid in fast, accurate follow-up shots. The sear captures the hammer at the back instead of near the pivot point to help produce the light pull and maintain safety. A second, independent, intercepting sear is positioned to block the hammer if it slips off the primary sear, as when the weapon is dropped or suffers hard impact. If the intercepting sear captures the hammer, pulling the trigger will still fire the rifle, though with a heavier pull weight. In addition, the Gold system uses the rifle’s factory safety to positively capture the hammer, like an M1 Garand, and roll it back below the primary sear for an extra margin of safety. A lightweight aluminum housing contains the entire system and maintains the correct tolerances between the working parts. The receiver pins serve only to anchor the module in the receiver, with no effect on trigger function. a b SPECS: Trigger/Hammer – Wire EDM cut S7 tool steel. Housing – Aluminum, anodized, black. AR Gold fits any mil-spec AR-15 with .154" trigger and hammer pin holes. Will not fit rifles with Colt-type sear block or ARstyle .308 rifles. SR Gold fits ArmaLite® AR-10®, DPMS LR-308, Knight’s Armament SR-25, and similar AR-style .308 rifles with .154" trigger and hammer pin holes. #100-004-262EN ar gold Modular trigger, 5A283C99 � � � � � � � � � � � � � � � � � � � � � � � � $ 283.99 #100-004-933EN sr gold .308 Modular trigger, 5A273F97� � � � � � � � � � � � � � � � � � � � � � � � � 279.99

DPMS AR-15/M16 TWO-STAGE TRIGGER GROUP

gives You More precise trigger Control For Long-range shooting

Drop-in replacement for standard factory AR-15/M16 hammer/trigger gives you a precise, highly controllable two-stage pull. First stage is as light as 1.75 lbs., while second stage breaks cleanly at 4.5 to 5.5 lbs. a b SPECS: Steel, matte black finish. Fits AR-15/M16 lower receiver with .154" hammer/trigger pin holes. Inlcudes hammer, hammer spring, trigger, trigger spring, disconnector and disconnector spring. #231-000-344EN DpMs 2-stage trigger group, 1C99L99 � � � � � � � � � � � � � � � � � � � � � � � � � $ 109.99

#207-000-017EN single-stage ttg, Curved shoe, 7K177J13 � � � � � � � � � � � � � � � � � � � � � � � � � $ 189.99 #207-000-018EN single-stage ttg, Flat shoe, 7K175M20 � � � � � � � � � � � � � � � � � � � � � � � � 189.99 207-000-019EN two-stage ttg, Curved shoe, 7K210G00 � � � � � � � � � � � � � � � � � � � � � � � � 210.00 207-000-020EN two-stage ttg, Flat shoe, 7K210Q00 � � � � � � � � � � � � � � � � � � � � � � � � 210.00

two-stage Design For ultra-precise release

Ready-to-install, match-grade trigger kit gives a light, ultra-smooth, twostage trigger pull and exceptionally clean, precise letoff for superb accuracy. Adjustable spring plunger on the safety selector allows you to set the secondstage release, while an adjustable setscrew on the selector lets you eliminate trigger overtravel. Full-width hammer and trigger engagement surfaces are precision-ground to eliminate grittiness. Kit includes trigger, trigger spring, disconnect, disconnect spring, hammer, hammer spring, safety lever with adjustment screws, hex wrench, and instructions. a b SPECS: Steel, black phosphate finish. Will not fit large-pin lowers or Colt lowers with safety block. #100-003-600EN ar-15 trigger group, 9B150Q03 � � � $ 164.99

DPMS AR-15/M16 FIRE CONTROL CONVERSION KIT

the right parts to Convert an M16 to an ar-15

Capable of semi-auto fire only, four trigger parts convert a full-auto, M16 to semi-auto configuration. Helps local departments/agencies take advantage of military surplus guns without having to train officers for full-auto fire. OEM-style to function correctly. Hardened steel, with black oxide finish, maintains factory function and appearance. Kit includes trigger, disconnector, hammer and selector. Gunsmith or armorer fitting recommended. a b SPECS: Steel, black, matte finish. #231-000-165EN M16 to ar-15 Fire Control Conv. kit, 1C35C00 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 39.99

GEISSELE AR-15/M16 SUPER 3-GUN TRIGGER

Fast-action trigger allows rapid Follow-up shots

Single-stage trigger drops in to standard AR-15 lower receivers and gives a short, light pull with rapid reset. Makes follow-up shots easy. Reduces trigger pull to as little as 3 1/4 lbs. Designed as a semi-auto-only derivative of the two-stage Super Select Fire combat trigger made for the Special Operations community. Uses standard hammer and trigger pins. Not recommended for duty use, bench rest or accuracy work. a b SPECS: Steel, black finish. Fits semi-auto AR-15/M16 receivers with .154" hammer and trigger pin holes. Includes trigger, tigger pin, 2 trigger springs, hammer, hammer pin, hammer spring, slave pin for trigger, disconnector & spring, lubricant, instructions. #100-013-883EN super 3-gun trigger, 7B250H00 � � � $ 250.00