9 minute read
See
Provides six-Position adjustment
M4-style receiver extension tube has six precision-machined notches on the underside for maximum flexibility in setting lengthof-pull with adjustable buttstocks. Lets you install a mil-spec stock on a civilian carbine or refit a rifle with an A2-style fixed buttstock with an adjustable M4 stock. Outside diameter of tube is machined approximately .003" oversized for snug, rattle-free fit of stocks designed for mil-spec extensions. Lightly sand interior of stock to get just the right combination of snugness and freedom over movement. Machined from a lightweight aluminum extrusion before hardcoat anodizing with a wear-resistant matte black finish. Rifle conversion also requires a carbine action spring and buffer, available separately. a b SPECS: Aluminum, hardcoat anodized, matte black. 71/4" (18.2cm) long, 1.149" O.D. #274-000-018EN receiver extension Tube, 4G19H99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 24.99 correct size for rattlefree Mounting of Mil-spec collapsible buttstocks
Advertisement
Receiver extension tube has the correct, 1.146" outside diameter for mounting collapsible buttstocks designed for the smaller, mil-spec tube. Lets you mount a mil-spec stock on a civilian carbine or convert a rifle with A2-style fixed buttstock to collapsible configuration; carbine action spring and buffer assembly required. Allows fast, easy repeatability of buttstock position with five notches on underside to accept the stock’s locking pin and corresponding white position numbers on top visible through the witness hole on many stocks. Precision machined from aluminum bar stock for consistent dimensions that ensure smooth, snag-free sliding of buttstock. a b SPECS: Aluminum, hardcoat anodized, matte black. 7- 3/16" (18.7cm) long, 1.146" O.D. #100-003-750EN car-15/M4 Mil-spec receiver extension, 3A40Q50 � � � � � � � � � � � � � � $ 44.99
replace factory usgi Tube or convert commercial carbine To accept Mil-spec adjustable buttstock
Replacement receiver extension tube is the correct length and 1.146" outside diameter for proper fit of a mil-spec carbine adjustable buttstock. Replace a worn out USGI tube, or convert a commercial carbine or fixed-stock rifle to accept an adjustable buttstock that requires the smaller, mil-spec tube. Six precision machined notches on the underside grasp the stock’s locking pin securely to ensure fast, positive stock length adjustments without slippage. One-piece aluminum construction with a tough, abrasion-resistant matte black hardcoat anodized finish. Rifle conversion also requires a carbine action spring and buffer, available separately. a b SPECS: Aluminum, hardcoat anodized, matte black. 71/4" (18.2cm) long, 1.146" O.D. #100-004-252EN Mil-spec receiver extension Tube, 3D38M22� � � � � � � � � � � � � � � � � � � � � � � � � � $ 44.99
PATRIOT ORDNANCE FACTORY AR-15/M16 ANTI-TILT BUFFER TUBE
Prevents carrier-Tilt & Wear of buffer Tube
Designed for M4-style, adjustable carbine stocks, this innovative receiver extension tube has integrated "fingers" that extend into the receiver and support the carrier, even when the bolt is fully forward. By cradling the carrier, it eliminates premature wear on the buffer tube caused by carrier-tilt. Machined from aircraft grade aluminum, this six position tube comes with three drainage holes, ideal for wet or marine environments. Buffer detent doubles as a lock to prevent the tube from rotating or coming loose under extreme operating conditions. a b SPECS: 7075 T6 aircraft aluminum, hardcoat anodized, matte black. 7.4" (18.7cm) OAL. 1.14" (2.9cm) O.D. #100-014-172EN enhanced anti-Tilt buffer Tube, 7D39L96 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 42.99
LAW TACTICAL AR-15/M16 GEN 3 FOLDING STOCK ADAPTER
Put a folding stock on any ar-Pattern rifle!
Law Tactical’s adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from a vehicle or transport in “nonpermissive” environments. Works with standard gas impingement OR gas piston system. Accepts A2, mil-spec M4-style, and commercial carbine receiver extension tube and any stock that fits them. Compatible with all standard bolt carrier groups, including full-auto and .308 size. Single-button operation for quick folding and unfolding and steel locking latch keeps stock securely in place when extended. Gen 3 has hinged than earlier generations to avoid interference when charging the weapon, and a setscrew keeps the adapter securely affixed to the receiver. Hinge tension is adjustable so you can choose how stiff the folding mechanism is. Includes special bolt carrier extension (no tools to install/remove) and buffer retainer and spring. a b SPECS: Machined 4140 steel, Cerakote finish, matte black. Adds 1.3" (3.4cm) to length of pull. 8.5 oz. (241g) wt. Do not fire rifle with stock folded. #100-015-850EN ar-15 folding stock adapter, 1D249A00 � � � � � � � � � � � � � � � � � � � � � � � � $ 269.99
use carbine buffer & spring in a1/a2 receiver Tubes
Billet aluminum spacer slips into a rifle-length receiver extension to let you install and use a carbine-length spring and buffer. Use in an A1, A2, or Magpul PRS receiver extension, along with a carbine-length spring and a Spike’s Tactical ST-T2 or ST-T3 buffer to reduce the cycle rate in a full-auto weapon for improved control and better handling. Tough, hardcoat anodized coating increases surface strength and wear resistance. a b SPECS: Aluminum, hardcoat anodized, matte black. .986" (2.5cm) diameter, 2.77" (7cm) long, 3.3 oz. (93.5g) wt. #100-008-582EN rifle stock buffer spacer, 3B23K45 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 26.95 balances The rifle for consistent accuracy
Pre-formed lead ingot increases rear weight to balance out muzzle-heavy, match AR-15’s for best accuracy. Denser than loose, lead shot; conveniently drops into the A-2 buttstock and is retained by the trap door. Can be cut, drilled or trimmed to achieve perfect balance. SPECS: Lead. 8" (20cm) long, 3 lb. 11 oz. (1.7 kg) wt. #776-015-001EN ar-15 a-2 buttstock Weight, 6G20H15 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 27.99
DPMS AR-15 BUTTSTOCK ExTENDER
extends length of Pull, improves shooting comfort
Aluminum extension provides an extra inch of stock length for AR-15A1 and A2 rifles. Helps tall and long-armed shooters achieve a comfortable head position for fast sight alignment, plus the extra length improves recoil and trigger control. Installs between stock and receiver; has the correct profile for a “belongs there” look. a b SPECS: 6061 T-6 aluminum, black, matte finish. Includes buffer tube extension and longer stock screws. #231-000-009EN ar-15 stock extension, 1C28I93� � � � � �$ 31.99
MODULAR DRIVEN TECHNOLOGIES AR-15/M16 ENHANCED MAGPUL RECOIL PAD
improves comfort & control of Your Magpul stock
Replacement recoil pads for Magpul buttstocks give you a more comfortable fit and better grip for enhanced control of your rifle. An aluminum insert maintains rigidity, while the slightly grippy, soft-rubber texture helps maintain a positive shoulder grip. Increases length-of-pull a little, decreases felt recoil - and installs in seconds. SPECS: Soft rubber, black. ¾" (1.9cm) wide. Adds ¾" to length-of-pull. #100-011-582EN Magpul recoil Pad, Prs/Moe rifle, 6E25Q89 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 29.99 #100-011-583EN Magpul recoil Pad, cTr/sTr/acs/ acs-l/ubr/Moe carbine, 6E25D89 � � 29.99
COMMAND ARMS CAR-15/M4 COLLAPSIBLE STOCK SADDLE
lightweight cheek support Plus convenient battery storage
Provides added cheek support for increased comfort and shooting accuracy to AR-type rifles equipped with M4-style collapsible stocks. Plus, gives an advanced tactical appearance similar to the SOPMOD stock. Made from a very lightweight, fiberglass reinforced plastic that’s as strong as it is functional. Waterproof, sealed compartments on each side will hold four “AA” or six CR123 cell batteries. No gunsmithing required for installation; saddle locks onto stock with accessory sling loop hardware that’s provided. a b SPECS: Injection molded plastic, black, matte finish, 53/4" (14.5cm) long, 23/4" (6.9cm) wide. Fits M4-style stocks only. #100-002-567EN std M4 stock saddle, 6C20Q27 � � � � � $ 24.30 enhances shoulder Purchase for comfort & better Weapon control
Replacement recoil pads give you enhanced shoulder purchase and recoil control with your Magpul CTR®, MOE®, UBR®, or ACS™ stock. Non-slip rubber surface holds firmly to your clothing when it counts in tactical opExtended Enhanced erations or competition for improved target acquisition and reduced felt recoil. extended is the original factory pad for Commercial CTR and MOE stocks. May also be mounted on ACS, UBR, and Mil-Spec CTR/MOE stocks to increase length of pull by 1/4". enhanced model’s thicker, vented, shock-absorbing construction helps reduce felt recoil for better weapon control and faster follow-up shots. Fits ACS, UBR, and Mil-Spec CTR/MOE. Will also fit CTR/MOE stocks mounted on commercial buffer tubes shorter than 71/4". a b SPECS: Rubber exterior over hard molded polymer core, black. Extended – .55" thick (14mm); Enhanced – .70" (17mm) thick. #100-004-167EN extended recoil Pad, 3K14N49� � � � � � $ 18.99 #100-004-168EN enhanced recoil Pad, 3K14K49� � � � � � 18.99
SIMS VIBRATION LABORATORY AR-15/M16 LIMSAVER® CARBINE RECOIL PAD
reduces felt recoil & improves Weapon control
Synthetic rubber recoil pad slips over the hard plastic buttplate on an M4-type adjustable carbine stock for secure, non-slip shouldering and as much as 70% reduction in felt recoil. Made from proprietary NAVCOM™ shock-absorbing material that won’t crack, split, or take a “set.” Spreads recoil over a larger area and prevents the stock from digging into your shoulder during long periods in the ready position. Improves weapon control and reduces muzzle jump to aid in fast, accurate follow-up shots. Secure snap-on design for quick installation and removal. a b SPECS: NAVCOM synthetic material, black. 51/4" (13.3cm) high, 2" (5.1cm) wide. Fits M4-type adjustable carbine stocks with buttplate up to 53/16" (13.2cm) high x 17/8" (4.8cm) wide. #100-005-457EN limbsaver recoil Pad, 7K28I89� � � � � � $ 37.99
SOG ARMORY CAR-15/M4 BUTTSTOCK PAD
comfortable Pad adds length To M4 stock
Rubber buttstock pad covers the hard plastic M4 stock for more comfortable shooting. Slip-on pad helps keep the gun against your shoulder and adds 1/2" to the length of pull. Plus, it protects the stock from bumps and dings. Installs with no modifications to the stock. Fits M4 stocks only. a b SPECS: Rubber, black. Adds 1/2" (12.7mm) to length of pull. Fits M4 stocks only. #100-002-210EN M4 buttstock Pad, 9A11J39 � � � � � � � � � $ 19.99
TAPCO CAR-15/M4 T6/M4 RECOIL PAD
increase shooting comfort & length-of-Pull
No permanent alterations necessary to your M4 or Tapco T6 collapsible stock to add increased shooting comfort, lower felt recoil, plus an additional 1/2" to the length-of-pull. Rubber pad slips easily over the plastic buttplate; held in position by rubber tabs and a friction collar. Won’t shoot loose, stays put until it’s removed. Great accessory for competitive shooters; raised, non-slip surface helps keep your rifle or shotgun on-shoulder during long shooting strings or moving courses of fire. a b SPECS: Rubber, black. Adds 1/2" (12.7mm) to length-of-pull. Fits current M4 collapsible stock designs and Tapco T6 stocks. #100-002-500EN Tapco M4/T6 recoil Pad, 5A9J99 � � � $ 11.99
