JANUARY - MARCH 2015
Specialist Tool Solutions
NEW PRODUCTS & SPECIAL OFFERS
INCLUDES BATTERY CARE, BRAKING, COOLING, ENGINE TIMING, LAND ROVER TOOLS, SUSPENSION, WORKSHOP TOOLS & MORE! www.sykes-pickavant.com
www.sykes-pickavant.com
08269000
NEW
AVAILABLE FEBRUARY
Ford Transit Lower Arm Bush Tool
• For the removal and replacement of the large rear bush on the lower arms of Ford Transits from 2000 – 2013 • Designed to be used with a 187000V2 press frame and ram • On vehicle solution with minimal strip down • Can also be used in a workshop press for lower arms when they have been removed from the vehicle • Applications: Ford Transit Mk5 & Mk6 from 2000 to 2013 • OE Bush Numbers covered: 4042024, 4372132, 4540787 & 7372131
£99.00
08756000 Ford Transit Bearing Press Kit
Successful removal of troublesome inner bearing race and reinstallation of complete bearing assembly • For the removal and installation of the front wheel bearing on Ford Transits 2000-2013 with the aid of a workshop press • Removes and installs bearings on both 5 and 6 stud hubs • Removes the inner and outer bearing race
£199.00
MADE IN THE UK
082545V2
UPDATED KIT
Ford Transit Hub & Front Wheel Bearing Remover Kit
SUSPENSION
Scan the QR code to watch an overview video of the Ford Transit Bearing Press Kit
Updated slide hammer kit now includes larger hub plate and extra-long pillars to enable removal of hubs and front wheel bearings on six stud Transits • For Ford Transit Mk6 & Mk7 Hub and complete front wheel bearing removal • Features a heavy duty slide hammer which operates in two directions to achieve multiple operations in one tool • Provides three different solutions in one kit: - Can be used as a traditional hub puller - Remove the stubborn inner bearing race - Use the slide hammer in the reverse direction to remove the outer bearing race
3 IN 1 TOOL
£379.95 Outer Bearing Race Removal
Hub Removal
Inner Bearing Race Removal
08255500
08255000 Ford Transit Press Upgrade Kit
Ford Transit Hub & Front Wheel Bearing Remover - Upgrade Kit
• Set of tools to enable the original Transit Bearing Kit (08254500) and the 082545V2 kit (above) to be used in a workshop press • Suitable for use on Ford Transits ‘00-’13 • Removes and installs bearings on both 5 and 6 stud hubs • Removes the inner & outer bearing race
£99.95 1
KEY
FOR USE WITH UNIVERSAL PRESS FRAME (18700100) See page 10
• Includes larger hub plate and extra-long pillars enabling owners of the original Transit Bearing Kit (08254500) to remove hubs and front wheel bearings on six stud Transits
£76.95 FOR USE WITH PRESS FRAME PRESSURE SCREW (18704100) See page 9
FOR USE WITH SP 12T HYDRAULIC RAM (18000000) See page 10
Mercedes Sprinter Ball Joint Tool Adaptor Set
AVAILABLE FEBRUARY
• For the removal and installation of ball joints on Mercedes Sprinter ‘95 -’06 and revised ‘06 onwards models (901, 902, 903, 904 and 906) • Adaptor set can be used with either Universal Press Frame & Ram (187000V2 - see page 9) or a workshop press • Enables work to be carried out on the vehicle • Applications: - Sprinter ‘95 onwards - VW LT ‘96 - ‘06 - VW Crafter & Sprinter ‘06 onwards
£159.00
NEW
187413V2 Mercedes Sprinter Ball Joint Tool including Press Frame & 12 Tonne Hydraulic Ram
• For the removal and installation of ball joints on Mercedes Sprinter ‘95 -’06 and revised ‘06 onwards models (901, 902, 903, 904 and 906) • Includes 187304V2 Adaptor Set (left) and Press Frame with 12 Tonne Hydraulic Ram • Adaptor set can be used in a workshop press
Tel: 01543 679900
187403V2
£399.00 08070000 Ball Joint Separator – HGV applications
3-Size Ball Joint Separator
• Ideal for use on vehicles: Audi / VW (A3, A4 and A6 with double wishbone), BMW & Mercedes-Benz • Drop forged rugged, flat design with three interchangeable forks - 24, 27 and 31mm • Forks are attached to the centre screw to allow continuous adjustment within the jaw capacity range • Features an internally operated drive spindle (M24) and an elongated recess in the forks, providing a safe & secure operation • Jaw capacity range: 30 - 65mm
NEW
180700V2
12 Tonne Hydraulic Ball Joint Separator Updated kit now uses power from the SP 12 tonne hydraulic ram
• Hydraulic version of the 08070000 HGV Ball Joint Separator (left) • Specification: - Jaw Opening: 70mm - Jaw Throat Width: 36mm - Jaw Throat Depth: 50mm
OFFER £219.95
£159.00
SAVE £70.00
LIST PRICE £289.95
Ford Transit Ball Joint Tool • For the removal & installation of the lower front ball joints as found on Ford Transits 2000-2013 • On vehicle solution provides time saving benefits • Tool designed to access the awkward location of the ball joint • Manual option includes screw converter allowing the user to utilise an existing SP hydraulic ram • Hydraulic option includes 12 Tonne SP hydraulic ram
Part No.
Description
Price
08256000
Manual Option
£172.50
18256000
Hydraulic Option
£249.00
*Note - Hydraulic ram included in 18256000 only
KEY
FOR USE WITH WORKSHOP PRESS See page 15
UPDATED KIT
SUSPENSION
08065000
• Strong, heavy duty body, with strengthened fork and lever, allows for greater force to be applied • Can be upgraded to hydraulic power • Jaw Opening: 70mm Jaw Throat Width: 36mm OFFER £115.95 SAVE £24.00 Jaw Throat Depth: 50mm LIST PRICE £139.95
FOR USE WITH AIR TOOLS See page 4
ON VEHICLE SOLUTION
Scan the QR code to watch a video of the Ford Transit Ball Joint Tool - Hydraulic Version
2
BEARING REMOVAL / INSTALLATION
Ford 82mm Bearing
3
Part No.
Size
08129500
72mm 78mm 82mm
08128000
78mm 82mm
08129000
62mm 66mm 72mm 85mm
Scan the QR code to watch a video of the 72mm GEN2 Bearing Tool
VW Group Bearing
Applications
Price
Essential Kit 72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) 78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 82mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70
£599.00
Ford / Volvo / Land Rover / Mazda Combined Kit 78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 82mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70
£345.00
VW Group Kit 62mm - Audi A2, VW Lupo (Front) 66mm - Skoda Fabia, VW Fox (Front), Polo 72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) 85mm - VW Multivan, Touareg, Transporter (Front / Rear)
£645.00
All Sizes Master Kit 62mm - Audi A2, VW Lupo (Front) 66mm - Skoda Fabia, VW Fox (Front), Polo 72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) 78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 82mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70 85mm - VW Multivan, Touareg, Transporter (Front / Rear)
081220V2
62mm 66mm 72mm 78mm 82mm 85mm
08123500
62mm
Audi A2, VW Lupo (Front)
£175.00
08124500
66mm
Skoda Fabia, VW Fox (Front), Polo
£175.00
08125500
72mm
Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front)
£199.00
08126500
78mm
Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3
£215.00
08128500
82mm
Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70
£225.00
08127500
85mm
VW Multivan, Touareg, Transporter (Front / Rear)
£249.00
£845.00
NEW LOWER PRICES!
www.sykes-pickavant.com
• The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo • Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers • Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings
Note: Spare Parts are available for all kits. Please see our website / catalogue
Tel: 01543 679900
NEW! ‘Bionigrip’ Air Die Grinders NEW • Provides perfect handling due to the ‘Bionigrip’ surface • Low noise level & minimal vibration provides less “kick back” from cutters • Includes stepless trigger and air exhaust to the rear Specification
Weight
Length
Precision Collet Maximum RPM
90211000
0.5kg
175mm
6mm
90212000
0.82kg
177mm
6.35mm
Air Inlet
Hose min.
Air Consumption
23,000
1/4” NPT
10mm
116 l/min
23,000
1/4” NPT
10mm
116 l/min
90211000
90212000
‘Bionigrip’ Heavy Duty Straight Air Die Grinder
‘Bionigrip’ Heavy Duty 90° Air Die Grinder
£79.95
£99.95
•
90213000
90220000
Micro Die Grinder
Universal Air Swivel Joint Inlet
• 2 x 360° rotation • Industrial quality • Heat treated connecting screw
£99.95
£14.95
High Quality Air Tools that set the standard for Torque! • Smart design impact wrench with ergonomically designed handle • Single-switch can be changed for easy forward or reverse operation • Easily adjustable torque regulator • Can be configured for right and left handed use • Composite body • High visibility green body to help reduce trip hazard
Impact Wrench Specifications: Part No. 90201000
Drive
Max Torque Torque Nm Nm (Reverse) (Fwd)
Noise (dBA)
Air Consumption Weight (l / min) (kg)
1/2”
1600
1084
94.2
135
1.8
90201500 (Mini) 1/2”
680
500
93.5
130
1.08
90202000
3/4”
2600
2000
97
210
3.2
90202500
3/8”
680
500
93.5
130
1.08
90203500
1/4”
90
90
98.2
105
0.9
90204500
1”
3100
2200
110
305
6.8
53399000 Retractable Hose Reel - 20m x 10mm
• Spring driven retractable hose reel c/w wall mounting brackets • Suitable for compressed air or OFFER £199.95 cold water up to 20 bar working SAVE £75.05 LIST PRICE £275.00 pressure • UV stabilised polypropylene • Includes 20 metre x 10mm heavy duty black rubber air / water hose to ISO EN 2398 standard • 3/8” bsp female inlet and the hose terminates in a 3/8” bspt male Hoses also available in 20m x 8mm (3/8” fittings) and 18m x 12mm (1/2” fittings). Contact Customer Services for more information
Price
AIR TOOLS
• Mini composite device for small / fine grinding and milling • Provides perfect handling due to the ‘Bionigrip’ surface • Minimal vibration and low noise • Exhaust air through hose to the rear • Length: 137mm
£179.00 £169.00 £499.00 £169.00 £139.00 £849.00
90210000 Signal Hose - 10mm (3/8”)
• Length: 10 metres • High-visibilty hose to reduce trip hazard • Abrasion resistant outer cover • Working temp range -40°c to +65°c • Working pressure: 300psi • Break pressure: 1000psi N.B. Hose supplied without fittings
£29.95
90201100 Rubber Boot - For 90201000
• For use with 90201000 - 1/2” Impact Wrench (see above) • Protects gun from accidental damage *Impact wrench not included
£16.99
4
www.sykes-pickavant.com
08550300 GM Gearbox Bearing / Race Remover
• For the removal of taper bearing cups from clutch housings in M32, MT 20-6 and MT 32-6 manual gearboxes widely used in GM, Saab and Fiat Group • Specifically designed to spread the load equally without danger of cracking the gearbox casing
£69.95 SAVE £20.00
Scan the QR code to watch a video of the GM Gearbox Bearing / Race Remover
07759700
NEW
Universal Timing Gear Holder
• Manufactured from high strength fibre reinforced nylon polymer • Single lever design enables quick and easy use • Provides breaker bar strength for maximum holding force OFFER £34.95 • Allows adjustment of cam SAVE £8.00 gear once installation is LIST PRICE £42.95 complete
ENGINE SERVICE
STAR BUY
081100SP Dual Mass Flywheel – Special Tool
• Developed in conjunction with LUK, to allow accurate testing of the Dual Mass Flywheels (DMF) unit, whilst it is still mounted on the vehicle, with the gear box removed • Includes all the components required to test the DMF including the LUK specific DMF data, instructional CD and Data Wheel which are vital to the correct operation of the kit • The Data Wheel provides specific data, per application, to allow the technician to correctly evaluate the DMF
£345.95
66095100 Vehicle Fluid Change Syringe - 1.5L
• Transparent design to easily view the fluid • Suitable for fluid suction and supply in vehicle service • Ideal for applications such as engine / gear oil & differential fluid • 1.5L capacity with rotative switch off
OFFER £41.50 SAVE £8.45
LIST PRICE £49.95
07754600
Universal Timing Gear Holder Kit • Timing belt service kit • Includes Universal Timing Gear Holder (left) and 4 x cam clamp pieces
OFFER £49.95 SAVE £30.00
LIST PRICE £79.95
03810000 Adjustable Oil Filter Remover - 3 leg • Spider-type wrench, c/w geared legs which automatically tighten as the force is applied • Range: 62 to 93mm diameter • 3/8” sq. dr c/w with adaptor for 1/2 sq.dr. and / or 19mm hex
OFFER £19.95 SAVE £4.00
LIST PRICE £23.95
03860000 Strap Type Oil Filter Remover - For all filters up to 300mm diameter • Multi-purpose strap wrench, ideal for all oil filters up to 300mm circumference • Range: 20 to 300mm diameter • Strap Length: 1 metre long & 40mm wide • Strong steel shank and polyester strap • Self tightening band designed for fast and secure filter removal • Double ended 13/16” hex c/w 3/8” & 1/2” sq. dr
OFFER £26.95 SAVE £8.00
LIST PRICE £34.95
5
NEW
Diesel Injector Seat Cleaner Set
• Cleans injector seats and chambers when changing or reconditioning diesel injectors • Helps to avoid blow-back due to poorly seated injectors • Now includes: - Removal tool for copper washers - Wire brush cleaning set for chamber walls - Injector blanking plugs to avoid debris entering the cylinders - Centralising stem to improve correct cleaning seating angle
FREE
Hydraulic Injector Puller Systems
Updated kits now include a set of solenoid sockets (01513500) and 2 x tamperproof sockets • For the removal of stubborn injectors • Provides controlled force to aid the removal of seized injectors where there is insufficient access for traditional slide hammers • Uses a multi-position frame, with adjustable legs of different lengths and a selection of mounting adaptors to allow alignment of the tool with the injectors on a wide variety of modern diesel engines • Supplied with injector adaptors for most modern injector types: M14 | M16 | M17 | M20 | M25 | M27
M9R Renault Kit (18582500)
WHEN YOU PURCHASE 185800V2SP OR 185810V2SP
Mechanical Hydraulic Injector Puller Kit
£1199.95
• As per 185800V2SP kit (left) but includes a mechanical hydraulic ram • Allows use of the kit ithout the need for a separate hydraulic pump
£999.95
01745000 Universal Injector Seat Cleaner Set • Designed to clean the injector holes after extraction work • Kit includes: - 20mm & 25mm metal brushes for injector hole cleaning - 1 x seal plug to close the injector hole while cleaning - 2 x front brushes for injector seat cleaning OFFER £49.95 - 1 x front brush extension SAVE £30.00 - 1 x sanding kit LIST PRICE £79.95 - 1 x seal plug holder to place & remove the plug
OFFER £245.00 SAVE £50.00
08585000
LIST PRICE £295.00
DIESEL INJECTOR REMOVAL
WORTH £101.90 185810V2SP
• 10 tonnes Hydraulic Hollow Cylinder provides the force – use with standard hydraulic pump (not supplied)
£175.00 SAVE £44.00
Applications: PSA Adaptor Plate Renault / Nissan / GM – Dci 2 litre (18583000) engines (M9R) A bespoke add on kit for use on PSA 2.0 & 2.2 litre HDi diesel engines
185800V2SP
Hydraulic Injector Puller Kit
STAR BUY
Tel: 01543 679900
017500V2
Heavy Duty Slide Hammer Injector Remover Kit
• For removal of Bosch, Delphi, Denso and Siemens injectors • Features a flexible u-joint adaptor for access in restricted areas • Contains 6 x Injector adaptors: M14 x 1.5, M16 x 1.0, M17 x 1.0, M20 x 1.0, M25 x 1.0, M27 x 1.0 - 4 x Injector Solenoid removers: M25, M27, M29, M30 - 2 x Nozzle Extractors: 6mm Tamperproof: 10mm hex - 7mm Tamperproof: 10mm hex • Heavy Duty Slide Hammer: Hammer Weight: 5.0kg (Total Weight: 8.0kg)
08551000 1.3 Common Rail Twin Injector Puller Attachment
• Enables the two injectors to be removed at the same time as shared injector clamp hinders removal of injectors individually • Suitable for use with 08585000 Kit & 185800V2SP Hydraulic Injector Puller Kit above • Commonly found on 1.3 engines: Alfa: Mito, Fiat: 500 / C, Doblo, Cargo, Fiorino, Grande Punto, Idea, Linea, Panda, Punto Evo, Qubo, Strada, Ford: Ka, Lancia: Musa, Ypsilon, Opel: Agila, Astra H, Corsa D, Meriva, Vauxhall: Astra MK V, Corsa MK III and Meriva
Scan the QR code to watch a video of the 1.3 Common Rail Twin Injector Puller Attachment
OFFER £74.95 SAVE £15.00
LIST PRICE £89.95
6
www.sykes-pickavant.com
COMPRESSION & PRESSURE TESTING
UPDATED KIT
314660V2 Common Rail Diesel (CRD) High Pressure Test Kit
Updated kit now includes unique pressure limiting valve in-built to prevent extreme pressures building in test kit during engine cranking
£399.95 314200V2
• Measures delivery pressure output from the CRD (Common Rail Diesel) high pressure pump under engine cranking conditions • Cranking test to show a “healthy” 250+ Bar output, gauge reads up to 600 Bar Tell-tale needle shows maximum pressure achieved during cranking test • High pressure test gauge allows direct connection to the high pressure pump, providing cranking pressure measurement of the pump • M12 x 1.5 & M14 x 1.5 connections • Includes shaped high pressure connector pipes (x5) to connect and cover many applications and supplied in a plastic case
Diesel Engine Compression Test Kit Standard Car Kit
• For both direct and indirect diesel injected engines • Checks engine compression under cranking conditions • Enables cylinder access through dummy injector and glow plug adaptors • Built-in pressure relief valve enables repeat tests without dismantling • Supplied in plastic case with foam insert • 560mm Rubber Hose • Gauge Scale: 0-60bar, 0-860psi • Gauge Diameter: 83mm
OFFER £215.00 SAVE £31.95
LIST PRICE £246.95
31405000 Petrol Engine Compression Tester
• Specially designed for deep seated spark plug ports with long narrow threads • Positive lock - quick release connector, ensures adaptors cannot accidentally be left in the spark plug port (which would then become extremely difficult to remove with deep seated plug ports) • Specially designed self-centering adaptors ensure minimal risk of cross threading when attempting to screw the compression adaptor into the spark plug port • Supplied in plastic case with foam insert OFFER £156.50 • Gauge Scale: SAVE £19.45 0 - 20bar, 0 - 190psi LIST PRICE £175.95 • Gauge Diameter: 83mm
31427500
SAVE £24.95
Diesel Engine LIST PRICE £399.95 Compression Test Kit Common Rail Diesel (CRD) • Covers a wide range of modern CRD diesel injected engines • Checks engine compression under cranking conditions • Enables cylinder access through dummy injector and glow plug adaptors • Built-in pressure relief valve enables repeat tests without dismantling • Supplied in plastic case with foam insert
31470000 Oil Pressure Test Kit
• Helps to diagnose worn oil pumps and engines, faulty oil pressure switches and pressure warning indicators • Shock protected dual scale gauge, for quick & accurate oil pressure checks • Permanently oil primed, 1m long flexible hose, enables access to difficult to reach oil switch ports • Small profile, quick coupling adaptors with built-in shut-off valve • 10 x oil switch port adaptors OFFER £169.95 • Supplied in plastic case with SAVE £13.00 foam insert LIST PRICE £182.95 • Gauge Scale: 0 - 10bar, 0 - 150psi • Gauge Diameter: 80mm
31462000 Common Rail Diesel (CRD) Fuel Return Flow Kit
7
OFFER £375.00
• Designed for use on the injector return side of a CRD system • Helps to diagnose: poor / no engine starting, poor engine running, poor acceleration / general lack of engine power • Fuel resistant, highly flexible rubber hoses • Suitable for solenoid injectors only • Supplied in plastic case and includes graduated acrylic measuring block for up to six cylinders, injector adaptor sets for Bosch / Delphi / Denso / Siemens, set of reduction pipes for small diameter flow back ports and under bonnet hanging hook
Scan the QR code to watch a video of the CRD Fuel Return Flow Kit
OFFER £169.00 SAVE £30.95
LIST PRICE £199.95
NEW 110V MODEL
Tel: 01543 679900
SP 110V Induction Heater + with SP Coil Kit (96015000)
New 110 Volt version designed with site work in mind, where only 110 Volt power is permitted • Provides safe and near instant heat for site work, construction and factory maintenance users, providing a small, fast and flexible tool in place of open flame options when heating components • Time saving tool ideal for use in all environments and makes the completion of on-site risk assessments far easier • Includes features as per SP Induction Heater + (below) • Specifically designed for the UK/EU: 110v/6 amp/1000 watt with full CE certification • Includes rope, u-form & pre-formed coil
Shown for illustrative purposes only
STAR BUY
SAVE £49.95
960200SP
960211SP
SP Induction Heater + with SP Coil Kit (96015000)
The SP Induction Heater + is a redesign and upgrade of the popular Mini-Ductor II®. Uses new engineering technology for increased energy efficiency and ease of use. Now you can use the power of technology with a flameless heat to quickly release corroded or seized components and other metallic parts. All without the damage normally associated with gas torches. Heats in seconds!
Key features of the SP Induction Heater + • Specifically designed for the UK/EU: 230v/6 amp/1000 watt – with full CE certification • Operates cooler for better efficiency, handling and product longevity • Carry Case; with storage for all attachments, fits in tool chests for security • Long operating cycle time • A true 1,000 watts max output power available • LED work light illuminates work area • Integrated CE filter improves handling of product • 1 year warranty - Parts/Labour • Includes rope, u-form & pre-formed coil
INCLUDES SP 110V INDUCTION HEATER + & SP COIL KIT
OR 960200SP
INCLUDES SP INDUCTION HEATER + & SP COIL KIT
96015000 SP Coil Kit
OFFER £645.00 SAVE £49.95
LIST PRICE £694.95
960260SP
96015000
SP Rope Coil Set - x3
SP Coil Kit
• Contains 8 x popular sizes of interchangeable coils • Supplied in protective case
£99.95
WORKSHOP TOOLS
960211SP
• Set of three highly adaptable coils allows user to shape to suit • Use three / four windings of coil for maximum performance
OFFER £74.85 SAVE £15.00
90206000
96025000
LIST PRICE £89.85
‘Vibro-Impact’ Air Hammer
SP Heat Pad
• Removal of decals, graphics, stripes, emblems & body mouldings etc • Softens the adhesive to make removal simple & effective
£67.95 Scan the QR code to watch a video of the Vibro Impact Air Hammer and SP Induction Heater +, that when used together, create a powerful solution for suspension bolts that are rusted in tight on a vehicle
• A unique concept to aid the removal of seized suspension parts • The ‘Vibro-Impact’ system allows for the controlled application of force via an air powered impact hammer • Allows the operator to control & gradually increase the force being applied, in order to loosen seized components • High visibility green handle to help reduce trip hazard • Features a built-in shock-absorber in order to minimise risk of damage if too much pressure is accidentally applied • Low vibration for user comfort • Supplied with a handy wall mounted storage Scan the QR code to bracket and a set of four impact hammers watch a video of the for variable ‘Vibro-Impact’ OFFER £275.00 applications Air Hammer
SAVE £60.00
LIST PRICE £335.00
8
www.sykes-pickavant.com
Land Rover Swivel Ball Joint Kit
• A new “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 ‘98 – ‘04 Range Rover P38A ‘94 – ‘02 • Uses the Sykes-Pickavant 187 Hydraulic Series press frame to deliver 12 tonnes of force, for a “take the press to the vehicle” solution (Inc in 18771100 only) • Designed, tested and manufactured in Great Britain
Available Options Part No.
Description
List Price
Save
Offer Price
18771000
Adaptor Set only
£199.95
-
£199.95
18771100
Adaptor Set plus Press Frame, Adaptor Ring & Ram
£499.95
£55.00
£444.95
Scan the following QR codes to watch videos of the kit in action Overview
Removal of front axle swivel ball joint
Insertion of front axle swivel ball joint
Land Rover Bush Kit
LAND ROVER
Sykes-Pickavant have developed a solution for the efficient removal and refitting of bushes on traditional Land Rover models
MADE IN THE UK
Scan the following QR codes to watch videos of the kit in action
Insertion
Removal
Available Options Part No. 18775000 18775500*
• For radius arm, panhard bushes & general suspension bushes • Dedicated shaped press pieces for correct location / alignment • Suitable for Land Rover Models: Defender, Discovery 1 & 2, Classic Range Rover, Range Rover P38A & older Series Land Rovers
Description
Contents
Price
Includes 6 Adaptor Pieces for use in a workshop press with suspension parts removed from vehicle (Can be used Adaptor Set only with a press frame or C Clamp - N.B. Requires 18775100 step plate) Kit includes 6 Piece Adaptor Set, 18775100 step plate, Bush Kit Press Frame Option press frame, adaptor ring & 12 Tonne SP hydraulic ram
£139.95 £429.95
*Note - With certain large radius arm bushes, the adaptor pieces can still be used with a workshop press or C Clamp
18775100
187000V2 Universal Press Frame c/w 12 tonne Hydraulic Ram
Multi-application Step Plate
• Updated unit now provides greater power • Open frame design - 200mm of clearance through the press frame • Includes adaptor ring (18780400) for use with 08780000 and related press piece sets • Ideal for use with individual model specific press piece sets
OFFER £245.00 SAVE £54.00
LIST PRICE £299.00
9
KEY
FOR USE WITH UNIVERSAL PRESS FRAME (18700100) See page 10
• New single piece stepped press frame plate • Allows for many different sized press pieces to fit positively into the frame for precise work
£29.95
18704100 Press Frame Pressure Screw
• To be used in press frame instead of ram for faster operation where greater travel is required to remove / install bushes • The screw has a fine thread and roller bearing for ease of use
£94.95
FOR USE WITH PRESS FRAME PRESSURE SCREW (18704100) See page 9
FOR USE WITH SP 12T HYDRAULIC RAM (18000000) See page 10
Land Rover Discovery 3 & 4 Suspension Bush Master Kit
NEW
A comprehensive solution specifically designed for removal of seized / corroded bushes and installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models • Available kits are as follows: - Master Kit - Front lower - Front upper - Rear lower - Rear upper • Only the bushes have to be replaced, saving the cost and time in replacing the complete arm • Lower arm bushes can be replaced on vehicle without having to remove the wheel • Individual press frame pieces for each wishbone • To be used in conjunction with the SP Universal Press Frame (18700100) and due to the nature of corroded components, the power of the SP 12 Tonne Hydraulic Ram is also required (18000000) (Can be purchased together as 187000V2 - Universal Press Frame c/w 12 Tonne Hydraulic Ram) • The SP 90206000 Vibro Impact Air Hammer and SP 96020000 Induction Heater can be used to assist in the removal of corroded suspension bolts and Scan the QR code to watch a bushes - See QR code video of the 90206000 Vibro
Other available options Part No.
Description
Price
18777100
Land Rover Discovery 3 & 4 Front Lower Kit
£259.00
18777200
Land Rover Discovery 3 & 4 Front Upper Kit
£169.00
18777300
Land Rover Discovery 3 & 4 Rear Lower Kit
£199.00
18777400
Land Rover Discovery 3 & 4 Rear Upper Kit
£169.00
03125000 Land Rover Viscous Fan Tool Set
£649.00
LAND ROVER
Impact Air Hammer & 96020000 SP Induction Heater removing the suspension bush bolts
MADE IN THE UK
Tel: 01543 679900
18777000
£59.95
NEW
• Use both tools together to replace the cooling fan on Land Rover Discovery 3, Range Rover 3 and Range Rover Sport models (V6 engines only) • Extra long, thin design for easier working in confined spaces • Length: 650mm
18700100
18000000
Universal Press Frame
SP 12 Tonne Hydraulic Ram
• Includes adaptor ring (18780400) for use with 08780000 and related press piece sets • Can also be used with SP 8 or 12 Tonne hydraulic ram and press frame pressure screw
• Can be used with 18700100 Universal Press Frame - see left • Features Hex Drive, to allow for greater input with use of ratchet spanner or socket
OFFER £91.50 SAVE £18.45
LIST PRICE £109.95
OFFER £165.00 SAVE £34.00
LIST PRICE £199.00
KEY
FOR USE WITH WORKSHOP PRESS See page 15
FOR USE WITH AIR TOOLS See page 4
10
www.sykes-pickavant.com
SUSPENSION “TAKE THE PART TO THE PRESS” 5343 SERIES
Hydraulic Press Range - 15T, 20T, 30T, 50T 18777000
187403V2
18775000
Mercedes Sprinter Ball Joint Tool Adaptor Set
Land Rover Bush Press Kit
Land Rover Discovery 3 & 4 Suspension Bush Master Kit 18777100 Front Lower Kit
18777200 Front Upper Kit
18777300
SUSPENSION
AVAILABLE FEBRUARY
Rear Lower Kit
18777400 Rear Upper Kit
187502V3
AVAILABLE FEBRUARY
Opel Movano / Renault Master / Nissan Interstar - UPPER Ball Joint Adaptor Set
187503V3
Opel Movano / Renault Master / Nissan Interstar - LOWER Ball Joint Adaptor Set
08756000 Ford Transit Bearing Press Kit
08255000 Ford Transit Press Upgrade Kit
53451500 53453000
Press Piece Sets
53451000 15-20T Press Plate
08269000 Ford Transit Lower Arm Bush Tool
53451200 Accessories Box
08770000 Universal Press Support Block
AVAILABLE FEBRUARY
08785500 XS Sleeve Kit Basic
11
08786500 XS Sleeve Kit Master
08780000 Car / LCV Sleeve Kit
08790000 SUV / LCV Sleeve Kit
08797500 Commercial Sleeve Kit
08795000 Upgrade Kit From 08790000 to 08797500
Tel: 01543 679900
N SOLUTIONS “TAKE THE PRESS TO THE VEHICLE” 187000V2
Universal Press Frame c/w 12 tonne Hydraulic Ram
18771000
18777000
18775000
Land Rover Discovery 3 & 4 Suspension Bush Master Kit
Land Rover Bush Press Kit
Land Rover Swivel Ball Joint Adaptor Set
18777100 Front Lower Kit
18777200 Front Upper Kit
18777300 18777400 Rear Upper Kit
187502V3
AVAILABLE FEBRUARY
187503V3 Opel Movano / Renault Master / Nissan Interstar - LOWER Ball Joint Adaptor Set
Opel Movano / Renault Master / Nissan Interstar - UPPER Ball Joint Adaptor Set
187403V2 Mercedes Sprinter Ball Joint Tool Adaptor Set
18704100 Press Frame Pressure Screw
18732500 Fiesta & Focus Bush Kit
AVAILABLE FEBRUARY
08269000 Ford Transit Lower Arm Bush Tool
SUSPENSION
Rear Lower Kit
18775100 18780400 Adaptor Ring Multi-application Step Plate
18732100
Fiesta Bush Adaptor Set 18732200
Focus Bush Adaptor Set
08785500 XS Sleeve Kit Basic
08786500 XS Sleeve Kit Master
08780000 Car / LCV Sleeve Kit
08790000 SUV / LCV Sleeve Kit
08797500 Commercial Sleeve Kit
08795000 Upgrade Kit From 08790000 to 08797500
12
www.sykes-pickavant.com
ALREADY HAVE ONE OF THESE??.... 08780000 Universal Press & Pull Sleeve Kit - Car / LCV Kit
£379.00
• Contains 20x Press Sleeves in 2mm diameter steps • Inside Diameter Range: 34 - 72mm • Outside Diameter Range: 44 - 82mm • 4x Step Plates / 4x Pulling Spindles with thrust bearings • Supplied in moulded storage case
....THEN THE NEW XS SLEEVE KIT IS A GREAT ADDITION!
£249.00
08785500 XS Sleeve Kit - Basic
NEW
• For use as an add-on to the Standard Press & Pull Sleeve Kit (08780000 - above) to increase applications for smaller bushes • Contains 10 x Press Sleeves in 2mm diameter steps • Inside Diameter Range: 14 - 32mm • Outside Diameter Range: 24 - 42mm • Includes extension spindle with thrust bearing, lock nuts and grease • Supplied in moulded storage case
PURCHASE 08780000 UNIVERSAL PRESS & PULL SLEEVE KIT & 08785500 XS SLEEVE KIT (ABOVE) FOR A SPECIAL OFFER PRICE
COMBINED OFFER
087800SP Universal Press & Pull Sleeve Kit c/w XS Sleeve Kit - Basic
SUSPENSION
+
= £578.00 SAVE £50.00
08786500
08790000 Universal Press & Pull Sleeve Kit - SUV / LCV
• For use as an add-on to the Standard Press & Pull Sleeve Kit (08780000 - above) OFFER £675.00 • Allows access to a wider range of vehicles SAVE £150.00 e.g. SUV’s & LCV’s LIST PRICE £825.00 • 2 x 20mm Pulling Spindle Adaptors with Thrust Bearings M20 • 8 x Press Sleeves in 2mm diameter steps • 4 x Step Plate Discs • Inside Dia. Range: 82 - 88mm & 98 - 104mm • Outside Dia Range: 92 - 98mm & 108 - 114mm
XS Sleeve Kit - Master
• Stand alone kit for smaller bush applications • Contains 10 x Press Sleeves in 2mm diameter steps • Inside Diameter Range: 14 - 32mm • Outside Diameter Range: 24 - 42mm • Includes 2 x spindles, 4 x stepped back plates, extension spindle with thrust bearing, lock nuts & grease • Supplied in moulded storage case
£325.00
08797500
Scan the QR code to watch an overview video of Suspension Removal & Installation Tools
Universal Press & Pull Sleeve OFFER £1150.00 SAVE £245.00 Kit - Commercial Vehicle • Complete kit for SUV, LCV, PSV, HGV • Contains 20x Press Sleeves in 2mm diameter steps • Inside Diameter Range: 74 - 112mm in 2mm steps • Outside Diameter Range: 84 - 122mm in 2mm steps • 4x Step Plate Discs / 4x Pulling Spindles with nuts & thrust bearings M10 / M12 / M14 / M16 • 2 x 20mm Heavy Duty Pulling Spindles (M20 long & M20 short) with thrust bearings
13
KEY
FOR USE WITH UNIVERSAL PRESS FRAME (18700100) See page 10
NEW
LIST PRICE £1395.00
08795000 Upgrade Kit - From 08790000 to 08797500
• For owners of kit 08790000 (SUV / LCV - above) who wish to upgrade to the full contents of the combined LCV / HGV Kit (08797500 - left)
OFFER £475.00 SAVE £110.00
LIST PRICE £585.00
FOR USE WITH PRESS FRAME PRESSURE SCREW (18704100) See page 9
FOR USE WITH SP 12T HYDRAULIC RAM (18000000) See page 10
Fiesta & Focus Master Bush Kit including Press Frame & Pressure Screw
• Kit includes adaptor set for the removal and installation of trailing arm bushes, 18700100 Press Frame and 18704100 Pressure Screw 18732100 - Fiesta Adaptors • Bush OEM Reference Numbers: Fiesta - 1011363, 1016439, 96FB5K653CA Focus - 1 061 670, 1304124 Fiesta Applications: - Fiesta ‘95-’02 - KA ‘96-’08 - Puma ‘96-’02 18732200 - Focus Adaptors Focus Applications: - C-MAX ‘07- MPV - MKI ‘98-’04 Estate, Hatchback, Saloon, Van Adaptor Sets - MKII ‘04- Convertible, Hatchback, Saloon, Van Adaptors in the following kits can be used in a press frame with either a 18704100 pressure screw (recommended) or a hydraulic ram Also works with the following applications: - Kuga ‘08- Off Road Part No. Description Price - Mazda 3 (BK) ‘03-’09 Saloon, Hatchback 18732100* Adaptor Set for Fiesta Trailing Arm Bushes £99.95 - Mazda 5 (CR/CW) ‘05- MPV - Volvo C30 ‘06- Hatchback 18732200* Adaptor Set for Focus Trailing Arm Bushes £99.95 - Volvo C70 II ‘07- Cabrio - Volvo S40 II ‘04-’12 Saloon - Volvo V50 ‘04-’12 Estate 18780400 MADE IN THE UK
£399.00
Tel: 01543 679900
18732000
• Ring sits in press frame for use with 08780000 Universal Press & Pull Sleeve Kit and related press piece sets to hold adaptors in place
AVAILABLE FEBRUARY
£19.95
UPDATED KIT
187512V3 Opel Movano / Renault Master / Nissan Interstar Ball Joint Tool Kit
• For the removal and installation of upper and lower ball joints as fitted to the following: - Nissan Interstar ‘02 onwards - Opel Movano ‘98 onwards - Renault Master II ‘98 onwards • Enables work to be carried out on the vehicle
£399.00
SUSPENSION
Adaptor Ring
Adaptor Sets Adaptors in the following kits can be used in a press frame with a hydraulic ram
Part No.
Description
Price
187502V3
Adaptor Set for UPPER Ball Joint
187503V3
Adaptor Set for LOWER Ball Joint
£99.00 £99.00
NEW LOWER PRICES!
087304V2 Ford & Volvo Rear Bush Tool Kit
NEW LOWER PRICE!
Updated kit now also capable of installing & removing the longer bush as fitted onto the nearside of newer model Volvo cars
• Individual press piece kit for dismantling and installing the rear wishbone / trailing arm bush • Correctly aligns & sets bush depth in trailing arm upon installation, so not to tear bush • Suitable for: Ford: Mondeo & Mondeo Estate ‘07-, S-Max & Galaxy ‘06Volvo: XC70 & V70 ‘07-, XC60 ‘08-, S60 & V60 ‘10For a full applications list, please visit our website - www.sykes-pickavant.com
KEY
FOR USE WITH WORKSHOP PRESS See page 15
FOR USE WITH AIR TOOLS See page 4
Suitable for both standard and new longer bushes
OFFER £279.00 ON CAR SOLUTION
SAVE £116.00
LIST PRICE £395.00
14
www.sykes-pickavant.com
NEW Silver Series range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm back-run system and V blocks • Welded, heavy duty steel frame • Overload safety valve • Pressure gauge • Winch for table (For models 53436400 & 53436500) • Piston over-travel limit stop
• Two speed pump • Automatic arm return • V blocks • Manufactured in the EU
Rating
Height (mm)
Width (mm)
Depth (mm)
Bed Depth (mm)
Range (mm)
Weight (kg)
Price
53436000*
15T
1930
920
650
170
85 - 950
150
£549.00
53436200*
20T
2030
940
650
180
65 - 1030
165
£669.00
53436400*
30T
2060
1120
650
200
115 - 1020
230
£989.00
53436500
50T
2290
1220
650
210
70 - 1065
370
£1549.00
Part No.
NEW
*Recommended for use with Universal Press Support Block - 08770000 - See page 17
53451000
NEW
15-20T Press Plate
£49.95
WORKSHOP EQUIPMENT
• Heavy duty plate sits on press bed with hole to push components through
NEW 53451500 15-20T Press Piece Set OFFER £89.00 SAVE £16.00
LIST PRICE £105.00
• Includes one adaptor & three press pieces • Sizes: 10, 18 and 24mm diameter
30-50T Press Piece Set
£9.95
SAVE £16.00
• Adjustable cradle for gearboxes up to 300kg • Twin adjustable screws allow for various gearbox orientations • Four adjustable side plates to fit and support gearboxes • Includes two collars to fit popular transmission jacks
LIST PRICE £115.00
• Remove and extract waste fluids or oil from an engine with flexible PV tube and robust probe • Powered from compressed air • 70L tank capacity • Adjustable 10L oil capture pan • Visible fill level indicator • 1 - 2 L/Min Suction capacity depending on nozzle used • Working pressure 8-10 Bar • Emptying with compressed air 1-2 bar • Includes selection of PV tubes to cater for different lengths and diameters of dipstick tubes WARNING: Do not use with corrosive or inflammable products FOR USE WITH UNIVERSAL PRESS FRAME (18700100) See page 10
NEW
Gearbox Cradle
OFFER £99.00
Pneumatic Oil Extractor
15
• Galvanised accessory box useful for storing press piece sets etc • Includes hanging hook
38450000
53390000
KEY
Accessories Box
NEW
53453000 • Includes one adaptor & six press pieces • Sizes: 5, 10, 14, 18, 24 and 29mm diameter
NEW
53451200
£179.00
NEW
38400000 Transmission Jack
Features include: • Pedal pump • Chrome plated extension rod • “Dead man” controls • Maximum height: 1970mm • Maximum weight: 300kg
£199.00
£269.00
FOR USE WITH PRESS FRAME PRESSURE SCREW (18704100) See page 9
FOR USE WITH SP 12T HYDRAULIC RAM (18000000) See page 10
FOR USE WITH WORKSHOP PRESS See page 15
FOR USE WITH AIR TOOLS See page 4
Pro-Start booster packs are perfectly safe for the on-board electronics on modern vehicles and are compatible with Petrol, Diesel & Hybrid vehicles Propulstation Booster Packs complete with docking station eliminate the risk and frustration of an uncharged booster pack! • Always in the right place • Always charged 100% • 3 times longer lifetime
Propulstation Booster Pack with Docking Station Features:
Pro-Start Booster Pack Features: • AGM internal batteries deliver high amperage instantaneously • Double insulated starting cables – 1.30 / 1.35 mtrs length • Illuminated voltmeter indicates booster charge level, booster & alternator function • Internal fuse protects against short circuits • Curved jaw clamps, fully insulated – blue clamp with LED lamp for safe use in the dark • Shock resistant, moulded case – (lifetime case warranty)
• The battery has an exceptionally high capacity to accumulate and disperse high-amperage energy. It uses pure lead plates and is an AGM (absorbed glass mat) type battery • Robust shell case design with 5mm shatterproof polyethylene • Long & flexible cables with double insulation offer a perfect resistance to extreme conditions • Robust, wide-opening clamps include copper trace carrying the current to the bronze jaws & protecting the powerful spring against over-heating
Tel: 01543 679900
A complete range of high quality Battery Booster Packs, covering a wide variety of applications including: Automotive, Agriculture, Plant, HGV, Marine & Aviation
ALL UNITS HAVE LIFETIME CASE WARRANTY & 2 YEAR BATTERY WARRANTY Voltage
Cranking Amps
Peak Amps
Price
861041SP SOS Booster 440
12v
440
1600
£165.95
861001SP Pro-Start 700
12v
700
1860
£275.00
861002SP Pro-Start 800
12v
800
2370
£355.00
761001SP Pro-Start Plus 1400
12/24v
1400/700
3720/1860
£650.00
761006SP Pro-Start Plus 1600
12/24v
1600/800
4740/2370
£860.00
Part No.
Description
Propulstation Booster Packs with Docking Station Specifications: Choose from: - AC Model - Supplied with mains AC charger for workshop / showroom use - DC Model - Supplied with 5m cable and one-way diode for connection to vehicle electrics (Ideal for recovery vehicles) Voltage
Cranking Amps
Peak Amps
Price
521001AC
12v AC
700
1860
£456.00
521001DC
12v DC
700
1860
£415.00
521002AC
12v AC
800
2370
£520.00
521002DC
12v DC
800
2370
£480.00
Part No.
BATTERY CARE
Pro-Start Booster Packs Specifications:
Extend your batteries’ lifetime with an Accu-Smart® Automatic Battery Charger • Suitable for Wet (Lead Acid), AGM, Gel & Fleece type batteries • No need for handling or mode selection, the charger works automatically, without external intervention, therefore it is not necessary to disconnect the battery from the vehicle before charging it • Manages and regulates the charge of the battery, so can be left connected on the battery permanently • The Accu-Smart® charger restarts in case of a power cut and provides total protection against short-circuits, peaks of voltage (AC or DC), inversion of polarity and over-heating spikes Part No.
Rating
845121SP
Applications
Accessories Included
Price
12 volts / 1 Amp
Eyelets / Crocodile Clamps
£35.00
845122SP
12 volts / 2 Amps
Eyelets / Crocodile Clamps Cigarette Lighter Plug
£47.00
845124SP
12 volts / 4 Amps
Eyelets / Crocodile Clamps Cigarette Lighter Plug
£62.00
845127SP
12 volts / 7 Amps
Eyelets / Crocodile Clamps Cigarette Lighter Plug
£90.00
16
www.sykes-pickavant.com
02251000
NEW
1/2” Impact Bar
Stud Remover & Installer Kit
• Unique design allows the installation and removal of studs without damaging the threads • Suits all popular metric automotive studs • Each stud size has one tool for removal and one tool for installation • Installation tool allows tightening and torque without thread damage • Kit includes: - M6 x 1.0 / M8 x 1.25 / M10 x 1.25 / M10 x 1.50 studs
NEW
88050000
• For loosening rusted or seized bolts using impact force • Produces 8 x torque multiplication with each hammer blow • Use with impact sockets and driver bits • Bi-directional – use to loosen or tighten fasteners • Swivel head aids with operation in limited access situations • Impact absorbing composite handle
£69.95 £69.95
30047500
WORKSHOP TOOLS & EQUIPMENT
Wireless Electronic Stethoscope Kit -“ChassisEAR”
• Designed for the detection of vehicle noises e.g. rattles, squeaks and air ingress under load, during a road test and for the diagnosis of a wide variety of potential faults e.g. wheel bearings, CV joints, differentials, transmission, injectors, alternators, water pumps, AC compressors and many more • Can be used on cars, vans, trucks, buses etc as there are no cable length issues to overcome • Consists of Receiver Unit, 4 x Transmitter Units (4 channels), 4 pick-up leads, pick-up fixing straps, headphones, batteries, manual & storage case N.B. Due care & consideration should be taken of driving conditions and regulations when operating the ChassisEAR™ on the road.
£399.00
30077500 EGR Valve Activator
• For testing & cleaning valve as part of routine servicing - no need to remove valve from vehicle for use • Prevents the unnecessary replacement of EGR Valves • Actuates EGR Valves in a fixed open position for cleaning and in an open / closed sequence for freeing carbon deposits • Choice of two test cycles: At the end of either test cycle the tool gives an audible indication when a faulty and unserviceable EGR valve is connected • Supplied with x3 connectors for different makes of valves • Power Supply: 220 ‐ 240V mains • Open / Close Time Cycle: 90 sec • Includes applications list - visit: www.sykes-pickavant.com for details Scan the QR code to watch a video of the EGR Valve Activator
08770000 Universal Press Support Block
• Universal Support for use with a workshop press • Easily press bearings on a wide variety of suspension arms • Three point contact guarantees a perfect, safe support • Adjustable height anvil bolts • Swivel element for added versatility
OFFER £189.00 SAVE £10.95
LIST PRICE £199.95
016795V2 29 Pc. Alternator Free Wheel Pulley Set
17
• Special set of Spline & Torx Socket Bits for the removal of free-wheel alternator pulleys • Locks the alternator, allowing the central locking bolt of the pulley to be released • Selection of 33 tooth reaction nuts and additional adaptors OFFER £79.95 • Updated 29 piece set covers a range of popular applications SAVE £20.00 • Applications list included - Visit www.sykes-pickavant.com for LIST PRICE £99.95 full details
£219.00
FORCE
38680000 Mechanical Coil Spring Compressor Workstation
Universal piece of equipment for assembling & disassembling struts & coil springs • Standard workstation construction but with Heavy Duty Mechanical compression components in place of pneumatic parts • Allows for use where air supply is limited, restricted or unavailable i.e. Mobile use • High power mechanical spindle allows for the application of up to 1600kg of compression force onto contained spring • Long main spindle achieves large 420mm of stroke – greater than our pneumatic workstations • Powered by easy access 19mm hex drive on top of tool direct onto main spindle and can be used with either hand tools or even impact air tools • Includes adjustable vice clamp as standard • Compatible with all other Sykes-Pickavant workstation standard jaws, brackets & accessories
Tel: 01543 679900
OF 00KG 6 1 O UP T
£795.00
Scan the QR code to watch a video of the suspension workstation range
)
AR (AT 10 B E C R O F KG OF
452
UP TO 2
385800SP
WORKSHOP EQUIPMENT
Pneumatic Coil Spring Compressor Workstation Extra Heavy Duty Model c/w FREE Mercedes Bracket Set
Universal piece of equipment for assembling and disassembling struts and coil springs • Suitable for cars, 4WD’s and light commercials that use McPherson strut type suspension systems • Front and side spring clamps designed for fast changeover using unique Brackets System • Fitted with Extra Heavy Duty Pneumatic Cylinder - Compression force OFFER £1595.00 (at 10 bar) = 2452 kg SAVE £150.00 • Ideal for Extra Heavy Duty applications i.e. SUV’s, 4WD’s etc where LIST PRICE £1745.00 full spring compression is required • Double-depth front plate for use on extra-long strut assemblies • Safety locking valves system – locks safety cage and prevents usage with cage open
FREE MERCEDES BRACKET SET
RTH WO39.95 £2
(38480100)
UPPER BRACKET FOR MERCEDES A, B, C, E CLASS & LOWER BRACKET FOR MERCEDES E CLASS
WHEN YOU PURCHASE 385800SP
Optional Accessories for use with Suspension Workstations
38480100 Mercedes Bracket Set - A, B, C & E Class
38480200 Upper Jaw Set for High Compression Springs
£42.95 £239.95 38480400 Special Bracket Porsche Cayenne / VW Touareg
£99.95 38480600 Special Bracket Nissan Qashqai
38480500 Special Bracket Mercedes C Class (2010-)
£179.95
36600500 Fuel Extractor / Retriever
£429.00
• Retrieve fuel following a filling error, removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc • Operates from workshop compressed air (no risk of sparks) • Mobile 45‐litre tank (on wheels) • Cleanly draws up or pushes out fuel due to a venturi system • Includes 2 anti‐static ground cables, overflow line and 3 fuel probes • Emptying via the tank filler neck or fuel lines • Stainless steel
38480700 Double Depth Strut Vice
£117.95 £97.95
18
DIESEL BLEEDING & FUEL INJECTION
www.sykes-pickavant.com
31467500 Diesel Fuel System Bleeding Kit
Many modern diesel fuel systems are very difficult to self-bleed once the low pressure feed circuit has been opened to the atmosphere. The circuit may have been opened by removing the fuel filter or by a damaged feed pipe. The pump unit contained in the kit enables the user to generate suction by continually squeezing and releasing the hand pump to draw the air and fuel through the low pressure system. • Designed to allow the user to bleed / prime the low pressure feed side of the diesel fuel system • Contains common sized low pressure pipe sets including: - Standard 8mm, 10mm and newer 9.65mm (3/8 inch) - Renault small & large - Ford • Typical coverage includes Citroën, Fiat, Ford, Land Rover, Peugeot, Renault, Volvo & Vauxhall • Supplied in tin Features • Clear pipes for visability of air bubbles • Colour coded pipes for easy identification • High grade reinforced pipes (rated over 10 bar) • Pump incorporates one way valve for ease of use - i.e. just one hand required
£199.95
Scan the QR code to watch a video of the Diesel Fuel System Bleeding Kit
Note: Pipes are sold as a paired set. Hand pump is sold with connecting pipes and 10mm convertor pipe
31467600 Ratchet Pump Kit
• Connects to 3/8” drive air ratchet to replace the hand pump section in 31467500 kit (above) to generate faster flow • Easily engages with all 3/8” Dr. air ratchets • Retaining bracket holds pump during use for one-hand operation • Supplied in plastic case
£99.95
31467000 Diesel Fuel System Bleeding Kit - Master Kit
• Master kit includes the Diesel Fuel System Bleeding Kit (as above) plus a low pressure fuel gauge (10bar), tee piece and ratchet pump • Gauge and tee piece enables the same pipes to be used for both bleeding and fuel pressure - providing a cost saving solution • The pipes and gauge can also be used on petrol engines where applicable • Ratchet pump provides a greater flow for when faster bleeding is required i.e on some Ford models • Supplied in foam in plastic case
£399.95
31485300 Comprehensive Schrader Valve Test Set
19
• Set of schrader type fuel port test adaptors which can be used with the fuel pressure gauge supplied in the Diesel Fuel System Bleeding Kit - Master Kit - above • Can be used to bleed air from the Schrader valve test port on specific vehicles - e.g. Saab • Schrader test ports are the preferred method of measuring fuel pressure on vehicles with fuel rails • Quicker and easier than breaking into fuel lines • Applications include: Alfa Romeo, BMW, Fiat, Ford, Jaguar, Land Rover, Mercedes, Mini, Saab, Vauxhall and Volvo
£109.95
NEW
Automatic Brake Bleeder - 12v
£584.95
Now includes aluminium Euro cap angled screw type
34303000
• Compatible with ABS systems • 12v powering with reverse polarity warning • Includes pump with automatic shut off valve • Regulator from 0 to 3Bar • 5L reservoir with visible level and min level indication • Auto power OFF when min level reached • 12V power cable with jack (L: 4m) • Fluid cable for brake fluid with quick coupling system (Length: 4m) • Includes fluid collection bottle & European screw-on reservoir cap • Stainless steel body • Professional pump and regulator fitted
Brake Bleeder Cap - Starter Set
• Starter cap bleeder set suitable for ‘343’ range of Electric Brake Bleeders • Precision engineered aluminium caps for the following applications: - New Ford Fiesta (34301000) - Nissan / Asian (Bayonet Type Cap) (34301100) - Euro Cap - Angled (Screw Type Cap) (34301400) • Full range of caps available - Contact Customer Services for details
Tel: 01543 679900
34300100
OFFER £99.95 SAVE £32.00
Model specific caps also available - Ask for details
LIST PRICE £131.95
NEW
Industrial Pump Sprayer - 1 Litre Includes adjustable brass spray head nozzle and viton seals
Vehicle Fluid Change Syringe - 200cc
• Transparent design to easily view the fluid • Suitable for fluid suction and supply in vehicle service • Composite plastic resistant to brake fluid & antifreeze • 200cc capacity with quick disconnect tube
• Industrial pump sprayer suitable for various chemicals e.g. detergents, solvents, brake cleaner and general cleaning agents* • Polythene body with pressure relief valve • Stainless steel piston rod *Important: Before use, please check the compatibility of the product you wish to spray
OFFER £19.95 SAVE £5.00
BRAKING
03470000
66050400
LIST PRICE £24.95
£11.95
Flaremaster 2 - The Original Hand Held Automotive Brake Pipe Flaring Tool
• Hydraulic power unit provides portable power for precision flaring • Quick-release chuck for positive engagement of the punch • Fast-turn coarse thread on hydraulic ram, for quick assembly • Locking bolt with swivel pin, for fast tightening • Enhanced bridge unit for greater strength • Inter-changeable die, held in place by magnets 02729600 • Creates SAE & DIN single and double flares • Create full, or part sections of pipe, which can be trimmed, flared or spliced as required • Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work or accident damage • Supplied in moulded plastic box Part Number / Description
Size
Contents
List Price
Save
Offer
02725000 Flaremaster2 Brake Pipe Flaring Tool
4.75mm, 3/16” brake pipes Flaremaster2 SAE & DIN single and double flares
£157.50
£28.00
£129.50
02725600 Flaremaster2 Brake Pipe Flaring Tool
4.75mm, 3/16” & 6mm brake pipes Flaremaster2 SAE & DIN single and double flares
£187.50
£32.00
£155.50
02729500 Flaremaster2 Flaring Kit
Flaremaster2 / Brake Pipe Aid Plier 4.75mm, 3/16” brake pipes Telescopic Tube Cutter (3-32mm) SAE & DIN single and double flares Pipe Deburring Tool (3.2-16mm)
£197.50
£34.00
£163.50
02729600 Flaremaster2 Flaring Kit
Flaremaster2 / Brake Pipe Aid Plier 4.75mm, 3/16” & 6mm brake pipes Telescopic Tube Cutter (3-32mm) SAE & DIN single and double flares Pipe Deburring Tool (3.2-16mm)
£227.50
£38.00
£189.50
20
www.sykes-pickavant.com
33145000 HGV Combustion Leakage Tester
NEW
• Fast and accurate diagnosis of cylinder head gasket leaks • Quick connector for use with 33140000 and 331400V2 cap adaptors • Suitable for use with both petrol & diesel engines • Supplied with standard and sensitive reaction test fluid (250ml)
03195000 HGV Airline Adaptor & Pressure Gauge Assembly
NEW
• To be used on larger cooling systems i.e HGV to speed up the pressurisation process using a tyre inflater • Includes pressure relief valve to prevent over-pressurisation • 30psi / 2 bar gauge • For use with 33140000 and 331400V2 cap adaptors
£84.95
£149.95 331400V2
NEW UPDATED KIT
HGV Cooling System Pressure Test Kit
COOLING
Updated kit now includes additional caps covering DAF LF, Renault D Series, Caterpillar, Optare bus, MAN bus, Dart SLF and Agricultural vehicles • Contents: - High capacity metal bodied hand pump with 0 - 2.5 bar pressure gauge - Quick-Connect Hose Assembly - 10 x Reservoir & Radiator Pressure Caps • Dual Gauge measures in p.s.i and bar • Additional Pressure Caps available - refer to applications guide • Applications include: DAF / Iveco / MAN / Mercedes / Renault / Scania / Volvo
£299.95
33165000 Speedfiller
NEW
• Unique multi-fit cone for universal use • Also capable of connecting directly onto quick release cooling caps from 315, 316 and 317 Series kits using adaptor piece • For replacing the coolant after opening or draining the system • Eliminates airlocks during refilling through the use of vacuum
£129.95
Comprehensive applications listing provided with each kit
331595V2 ‘315’ Series Cooling System Test Kit
• All components of the ‘315’ range are fully compatible with older SP Cooling System Kits and can be used to upgrade previous generations of Cooling System Pressure Test Kits which are fitted with quick-release connectors. For older systems with a threaded connection, adaptor 03186870 is available • Contents: - Hand Pump with Pressure Gauge & Quick-Release fitting OFFER £235.00 SAVE £54.95 - Hose Assembly c/w quick-release fitting LIST PRICE £289.95 - 16 x Threaded Cooling System Cap Adaptors - 3 x Bayonet Fitting Cooling System Cap Adaptors / 1 x Cap Adaptor wrench
33159700
33159800
Cooling Cap Set - To update 33159500 Kit
• Set of 5 additional cap adaptors to update original 33159500 ‘315’ Series Cooling System Test Kit to present coverage • Applications include: BMW, Chevrolet, Mercedes, Mini, Saab & Vauxhall
21
Note: Full application details can be found on our website: www.sykes-pickavant.com
OFFER £69.95 SAVE £10.00
LIST PRICE £79.95
Cooling Cap Set - To update 331595V2 Kit
• Set of 2 additional cap adaptors to update 331595V2 ‘315’ Series Cooling System Test Kit above to present coverage • Applications include: BMW, Chevrolet, Mini, Saab & Vauxhall Note: Full application details can be found on our website: www.sykes-pickavant.com
OFFER £37.45 SAVE £12.50
LIST PRICE £49.95
Ford 1.0 SCTi ‘Ecoboost’ 3 Cylinder Petrol Engine Timing Kit
OFFER £375.95 SAVE £77.00
LATEST VEHICLE COVERAGE
07766300
NEW
VW Group 1.0L 3 Cylinder Petrol Engine Timing Kit Applications: OFFER £114.95 Volkswagen: up! (‘11-) SAVE £24.00 Skoda: Citigo (‘11-) LIST PRICE £138.95 Seat: Mii (‘12-) Engine Codes: CHYA, CHYB, CPGA
LIST PRICE £452.95
07766200 VW Group 1.8L & 2.0L Petrol Engine Timing Kit Applications: Audi: A3, A4, A5, A6, Q3, Q5, TT (‘08-) Seat: Altea/XL, Leon, Toledo, Exeo, Alhambra (‘08-) Skoda: Yeti, Octavia II/III, Superb II (‘08-) Volkwagen: Golf, Beetle, Jetta, Scirocco, Eos, Passat/CC, Tiguan, Sharan, Amorok (‘08-) 1.8TFSi Engine Codes: CABD, CJEB, BYT, BZB, CDAA, CJSA, CDAB, CJSB, CABA, CDHA, CABB, CDHB 2.0TFSi Engine Codes: CCZA, CDNC, CFPA, CNCD, CAWA, CCZB, CDND, CHHA, CPLA, CAWB, CCZC, CESA, CHHB, CPSA, CBFA, CCZD, CETA, CJKA, CCTA, CDNB, CFKA, CJKB
NEW
OFFER £189.00 SAVE £46.00
LIST PRICE £235.00
07756100 Seat / Skoda / Volkswagen 1.2L 6v/12v 3 Cylinder Petrol Engine Timing Kit
07755100 Renault Twin Cam 16v / Opel Vauxhall 2.0L / Dacia 1.6L / Nissan 1.6 & 2.0L Petrol Engine Timing Kit • Set of locking tools required for cam belt service Applications include: Renault: Avantime, Clio 2 & 3, Espace, Kangoo, Laguna, Logan, Megane, Modus, Scenic, Traffic, Twingo & Vel Satis Opel / Vauxhall: Vivaro Dacia: Duster, Logan, Sandero Nissan: Kubistar & Primastar Note: Full application details can be found on our website: www.sykes-pickavant.com
ENGINE TIMING
• Ford Applications: Focus (‘12-), Fiesta (‘13-), B-Max (‘12-), C-Max (‘12-), Transit Connect (‘13-), Ecosport (‘13-), Grand C-Max (‘12-), Tourneo Connect (‘14-), Mondeo (‘14-), Transit Courier (‘14-) • Engine Codes: M1DA, M1JA, M1JE, M2DA, M2GA, P4JA, P4JB, SFJA, SFJB, XMJA, XMJB
Tel: 01543 679900
NEW
07766100
• Set of locking tools required for chain maintenance Applications include: Seat: Cordoba, Ibiza Skoda: Fabia 2, Roomster Volkswagen: Fox, Polo IV / V Note: Full application details can be found on our website: www.sykes-pickavant.com
OFFER £57.95 SAVE £12.00
LIST PRICE £69.95
077523V2 Ford 1.25 - 2.3L / Mazda 1.25 - 2.5L / Volvo 1.6, 1.8, 2.0L Petrol Engine Timing Kit
• Set of locking tools enabling correct valve timing Applications include: Ford: Cougar, Fiesta, Focus, Fusion, C Max, Galaxy, S Max, Mondeo, Puma Mazda: 2, 3, 5, 6, 121, MPV, MX5, Tribute Volvo: C30, S40, S80, V50, V70 Note: Full application details can be found on our website: www.sykes-pickavant.com
OFFER £53.95
OFFER £16.50
LIST PRICE £64.95
LIST PRICE £19.95
SAVE £11.00
SAVE £3.45
22
NEW
NEW ERVICE
RO EQUIPMENT RANGE
A NEW RANGE OF PROFESSIONAL SERVICE STATIONS TO PROVIDE A QUICK AND EFFICIENT WAY OF SERVICING FLUID SYSTEMS 53402500
53401500
Fortron Automatic Transmission Fluid Flush Machine - Fully Auto
Fortron Coolant Flush Machine
• Suitable for all types of coolants and vehicles • Includes a set of multi-application adaptor fittings • Effective way of flushing and exchanging the complete cooling system fluid • Air operated and portable
• Can replace up to 100% of transmission fluid • Ability to specify exact amount of fluid to change • Fully automatic and user friendly safe • Includes comprehensive adaptor set and Flush Service Kit • Safely cleans up and extends the service life of automatic transmissions
£3495.00
£1995.00
53402600 ATF Flush Service Kit • Includes bottle of Automatic Transmission Flush and tube of Auto Trans & Power Steering Concentrate
£11.49
53403500
53404500
Fortron Injector Max Machine
• Suitable for petrol and diesel engines • Cleans the complete fluid systems without disturbing / removing any key components • Includes comprehensive adaptor set and Injector Max Fluids - Petrol & Diesel • Air operated
Includes comprehensive adaptor set
53403600
53403700
Injector Max Premix Solvent - Petrol
Injector Max Premix Solvent - Diesel
£1749.00
Fortron Power Steering Flush Machine • Replaces 100% of steering fluid • Takes on average 10 minutes per service • Extends the service life of (often overlooked) system • Revitalises and conditions ‘o’ rings and seals • Portable, sturdy design • Includes Power Steering Flush Service Kit
£995.00
53404600 Power Steering Flush Service Kit • Includes bottle of Power Steering Flush and 50ml tube of Auto Trans & Power Steering Concentrate
£17.99
£17.99
Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: sales@sykes-pickavant.com www.sykes-pickavant.com ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE - PRICES VALID UNTIL 31ST MARCH 2015 - REF: SPQ115GBP COPYRIGHT 2015 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED.
£11.49
Distributor Stamp: