Specialist Tool Solutions
NEW PRODUCTS
SPECIAL OFFERS
JULY - SEPTEMBER 2016 www.sykes-pickavant.com
Tel: 01543 679900 www.sykes-pickavant.com
COOLING COMBINED DEAL!
331595V2SP1 ‘315’ Series Cooling System Pressure Test Kit c/w Combustion Leakage Tester
+
Provides an effective solution when pressure testing the cooling system to help locate internal & external leaks
• Includes: - Hand Pump with Pressure Gauge & Quick-Release fitting - Hose Assembly c/w quick-release fitting - 16 x Threaded cap adaptors - 3 x Bayonet Fitting cap adaptors - 1 x Cap Adaptor wrench • Includes Combustion Leakage Tester (33195000) for the fast and accurate diagnosis of cylinder head gasket leaks
OFFER £269.90 SAVE £90.00
LIST PRICE £359.90
Note: Full application details can be found on our website: www.sykes-pickavant.com
COMBINED DEAL!
331400V2SP XL Cooling System Pressure Test Kit c/w XL Combustion Leakage Tester
+
Now covers more: DAF, Renault, Caterpillar, Optare, MAN, Dart, Komatsu, JCB, Volvo construction and agricultural vehicles
• Includes: - Metal bodied hand pump with Pressure Dual Gauge & Quick-Release fitting - Hose Assembly c/w quick-release fitting - 10 x Reservoir & Radiator pressure caps • Includes XL Combustion Leakage Tester (33145000) for the fast and accurate diagnosis of cylinder head gasket leaks
OFFER £249.90 SAVE £135.00
LIST PRICE £384.90
FOR BOTH PETROL & DIESEL ENGINES 31370000 Combined Petrol & Diesel Cylinder Leakage Tester Kit • Provides a direct indication to the location of the leak by measuring the rate of loss of compression for individual cylinders • Helps to diagnose worn / broken piston rings, burnt / leaking valves and faulty head gaskets • Includes a selection of glow plugs and an adjustable dummy injector • Supplied with M12 and M14 brass quick release spark plug adaptors
31370500 Petrol only Cylinder Leakage Tester Kit
• As per kit above excluding glow plugs & dummy injector
33147800
33159800
• Optional Cap Adaptor for use with 33140000 kit and 331400V2 kit (above)
1
£149.95
Fortron Coolant Flush Machine
• Effective way of flushing and exchanging the complete cooling system fluid • Suitable for all types of coolants & vehicles • Includes a set of multi-application adaptor fittings • Air operated and portable • Synchronised operation – Provides a controlled flow of new fluid under pressure and draws old fluid out of system using adjustable vacuum
Cooling Cap Adaptor Set
HGV Cap Adaptor Dennis / Optare
Applications: Dennis Dart PSV’s / Optare Solo PSV’s and related models
£249.95
53401500
• Set of 2 cap adaptors to update 331595V2 kit (above)
£1995.00
£49.95 Fluid Accessories
£39.95
Applications include: BMW, Chevrolet, Mini, Saab & Vauxhall Note: Full application details can be found on our website: www.sykes-pickavant.com
Part No. 53401600
Description
Price
Coolant Flush Treatment Additive
£11.49
Coolant Flush Treatment Additive - 12 Pack also available (534016-12)
WORKSHOP TOOLS 03202500 Start / Stop Battery & Electrical System Analyser
• Tests 6V-12V batteries and 12V-24V volt charging & starting systems • Digital screen with integrated printer • Operating range: 40-2000 CCA • Bad connection warning • Tests EFB, VRLA / GEL, AGM Flat Plate, AGM Spiral and regular liquid batteries in seconds • Rating system: OFFER £279.95 SAE (CCA) / DIN / EN / SAVE £20.00 IEC & JIS LIST PRICE £299.95
325200SP Portable 4 Gas Analyser with Printer
MADE IN THE UK
• For fault diagnosis, tuning and pre-MOT testing • Truly portable hand-held gas analyser - Ultra light weight - only 1.1kg • Measures CO, HC, CO2, O2 (NOx model option available on request) to Class 1 accuracy • Suitable for both petrol and LPG vehicles and ideal for both static and dynamic testing • Internal memory stores up to 250 test results • Up to 4 hours internal battery life • Provides Lambda / AFR measurement & corrected CO • Pump speed control - Improves battery life • Bluetooth connectivity to PC (Free analytical software available to download)
• Includes printer and AC / 12v chargers
INCLUDES INFRA-RED WORTH PRINTER £295.95!
£1495.00
01493500 Digital LCD Circuit Tester
• Suitable for 6, 12 and 24v systems • LED indication for power (red) and ground (green) • Features crocodile clip with spring cable extendable to 3 metres • Stainless steel probe • Small testing current <10mA
£24.95
69018500 Ratcheting Crimping Plier for Insulated Terminals • Steel construction with hardened & tempered jaws • Ratchet action ensures consistent tension when crimping • Suitable for terminals: 0.5 - 1.0mm / 1.5 - 2.5mm / 4.0 - 6.0mm
03275000 Two Way Hose Clamp Plier
OFFER £20.95 SAVE £6.00
LIST PRICE £26.95
OFFER £19.95
IDEAL FOR USE ON VW FUEL FILTER PIPE CLIPS
SAVE £5.00
LIST PRICE £24.95
• For use on radiator clamps, fuel line clamps, tank ventilation line clamps and bearing clips • Intersected slot design ideal for use in confined spaces • 16mm wide head more effectively grips hose clamp compared to general 9mm head pliers
04551000 11 Pc. Non Marking Trim Tool Set • Professional set of strong, flexible plastic angled, lever and panel pullers • Reduces risk of damaging / scratching surfaces compared to general 9mm head pliers
£16.95
88050000 1/2” Impact Bar
£79.95
• For loosening rusted or seized bolts using impact force • Produces 8 x torque multiplication with each hammer blow • Use with impact sockets and driver bits • Bi-directional – use to loosen or tighten fasteners • Swivel head aids with operation in limited access situations • Impact absorbing composite handle
2
Tel: 01543 679900 www.sykes-pickavant.com
HGV 18797000
NEW
HGV Split Bush Kits
For the removal and installation of split / spring eye bushes on HGV vehicles • Uses a unique clamping system and a series of shells for a range of bush sizes from 56mm Dia to 75mm Dia. • When used with a hydraulic pump (20017000) the kit allows the operator to work in a limited access environment and so reduce the amount of disassembly work required Part No.
Applications: Mercedes Benz, MAN, MAN Front Spring, IVECO Eurostar, Mercedes Benz Actros, Atego, DAF and Volvo
18797000 Split Bush Kit - Master • Comprehensive kit includes clamp assembly, 9 x shells - 56mm / 58mm / 60mm / 63mm / 65mm / 66mm / 68mm / 70mm / 75mm plus hydraulic components
£745.00
18799000 Split Bush Kit - MB & DAF • Includes clamp assembly, 2 x shells - 63mm and 75mm plus hydraulic components
£495.00
Description
Price £374.00
18798000
Split Bush Kit - Basic (Clamp Assembly & Shells 1-9)
18799500
Split Bush Kit - MB / DAF - Basic (Clamp Assembly & Shells 1 & 6) £195.00
187970-01 Clamp Assembly
£149.00
18797100
Shell 1 (75mm) - Mercedes Benz
£29.95
18797200
Shell 2 (70mm) - MAN
£29.95
18797300
Shell 3 (68mm) - MAN Front Spring
£29.95
18797400
Shell 4 (66mm) - IVECO Eurostar
£29.95
18797500
Shell 5 (65mm) - Mercedes Benz Actros, Atego
£29.95
18797600
Shell 6 (63mm) - DAF
£29.95
18797700
Shell 7 (60mm) - Mercedes Benz / IVECO Eurostar
£29.95
18797800
Shell 8 (58mm) - Mercedes Benz / Volvo
£29.95
18797900
Shell 9 (56mm) - IVECO Eurostar
£29.95
A full list of components is available on our website. Please visit: www.sykes-pickavant.com
Note: Part kits also available - see table for details
Scan the QR code to watch an overview video of the HGV Split Bush Kit
Hydraulic Aluminium Pumps • Portable & lightweight aluminium bodied hydraulic pumps fitted with gauge, hydraulic heavy duty hose and ¾” hydraulic coupler • Pressure Rating: 10,000 psi / 700 bar • Designed for use with single acting cylinders • Automatic overload relief valve protects hydraulic components
NEW
20017500
20017000
Hand Operated Pump
• Automatic two speed operation - High flow for low resistance and low OFFER £432.95 flow for high SAVE £30.00 LIST PRICE £462.95 resistance
Air Powered Pump
• Foot pedal control • Unique inlet and outlet design features a low noise exhaust OFFER £429.95 system SAVE £20.00
INCLUDES FREE CASE 800400SP ‘Motorq 400’ - 3/4” Push-Thru Heavy Duty Torque Wrench • 150 - 700 Nm / 100 - 500lbs.ft • Length: 1150mm • Weight: 6.30kg
INCLUDES FREE CASE 800500SP ‘Motorq 500’ - 3/4” Push-Thru Heavy Duty Torque Wrench • 300 - 1000 Nm / 200 - 750lbs.ft • Length: 1475mm • Weight: 7.30kg
LIST PRICE £449.95
£402.00 £412.00
800550SP INCLUDES FREE CASE ‘Motorq 550’ - Stepped 3/4” to 1” Heavy Duty Torque Wrench • 1” Sq. Dr (uses ¾” to 1” stepped convertor) • 700 - 1500 Nm / 500 - 1000lbs.ft • Length: 1475mm • Weight: 10.40kg
3
£618.00
FLUID HANDLING New Range of AdBlue Transportation Tanks
AVAILABLE IN TWO TANK SIZES • For transportation and refuelling of AdBlue equipped vehicles 68L & 110L • Ideal for car, van, light commercial, agricultural, construction and heavy commercial workshops • Impact resistant polyethylene tank, UV stabilised and equipped with wheels suitable for easy transportation • Available in two tank sizes - 68L for small workshops & 110L for large workshops • Horizontal filling operation • Vented filling plug
NEW
Part No.
Description
Type
Transport Tank - 68L 36610100 AdBlue Manual Pump Transport Tank - 68L 36610300 AdBlue Manual Pump Transport Tank - 68L 36610500 AdBlue 12v DC Pump Digital Hose End 36601000 AdBlue Meter Transport Tank - 110L 36611000 AdBlue 12v DC Pump
34400500
Hose
4m EPDM 4m Plastic manual rotary pump with stainless steel spout & plug PVC 4m 12v DC pump - 30L/Min with plastic manual nozzle EPDM Suitable for use with above models 3m 12v DC pump - 30L/Min with “Piusi” digital nozzle EPDM Plastic manual rotary pump with plastic manual nozzle
6 BAR
Tank Empty Weight
Price
11kg
£399.00
10kg
£349.00
16kg
£595.00
-
£199.00
12kg
£1055.00
36600500
240v Electric Brake Bleeder
• One man operation for brake & clutch bleeding • Compatible with ABS systems • Rugged impact resistant moulded housing • Long supply hose (3.2m) • Weight: 10kg • Adjustable pressure output from 0 - 6 bar to suit vehicle • Large internal storage area for brake fluid containers up to 10L • Includes aluminium SP Euro cap OFFER £475.00 angled screw type for popular SAVE £24.00 vehicle connection LIST PRICE £499.00
STAINLESS STEEL 45L TANK
Fuel Extractor / Retriever
• Retrieve fuel following a filling error, removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc • Emptying via tank filler neck or fuel lines
36600700
£448.95
Adaptor Set • Set of fittings to connect in line, before the injection pump (on most fuel systems) for safe emptying of fuel
£24.95
Additional range of caps also available
IDEAL FOR VEHICLES WITHOUT A SUMP PLUG
53390000 Pneumatic Oil Extractor
53390500 Pneumatic Oil Extractor with 9 Litre Inspection Chamber
£269.00
• Includes inspection chamber providing visual assurance that the suction facility is operating correctly • Waste oil becomes immediately visible in the chamber allowing the user easy assessment of the oil • Includes anti splash device
£325.00
Pneumatic Oil Extractors
Designed to meet the requirements of the modern workshop as well as health & safety issues • Remove / extract waste fluids or oil from an engine • Combined volume capacity of 90 litres (70L tank & 20L drain bowl) • Works best at oil temperatures between 40-60° with suction speeds of up to 6 litres per minute • Visible fill level indicator • Working pressure 8-10 Bar • Powered from compressed air • Empty tank with compressed air at max. 1 bar pressure • Includes: - Adaptors for BMW, Mercedes, VW and Citroen - 4 x 700mm nylon tube probes with internal spring steel anti-kink wires - 2 x 700mm steel probes WARNING: Do not use with corrosive or inflammable products
4
Tel: 01543 679900 www.sykes-pickavant.com
TORQUE 80002000 ‘Motorq 20’ - 3/8” Push-Thru Torque Wrench
OFFER £89.95 SAVE £21.00
LIST PRICE £110.95
• 3/8” push thru sq dr • 4 - 20 Nm / 40 - 180lbs.in • Length: 210mm • Weight: 0.36kg
80010000 ‘Motorq 100’ - 3/8” Push-Thru Torque Wrench
80006000
OFFER £109.95 SAVE £22.00
LIST PRICE £131.95 ‘Motorq 60’ - 3/8” Push-Thru Torque Wrench
• 3/8” push thru sq dr • 8 - 60 Nm / 5 - 45lbs.ft • Length: 310mm • Weight: 0.66kg
OFFER £109.95 SAVE £22.00
LIST PRICE £131.95
• 3/8” push thru sq dr • 20 - 100 Nm / 15 - 80lbs.ft • Length: 355mm • Weight: 0.73kg
80020000 ‘Motorq 200’ - 1/2” Push-Thru Torque Wrench
OFFER £124.95 SAVE £26.00
LIST PRICE £150.95
• 1/2” push thru sq dr • 40 - 200 Nm / 30 - 150lbs.ft • Length: 445mm • Weight: 1.01kg
80030000 ‘Motorq 300’ - 1/2” Push-Thru Torque Wrench
OFFER £137.95 SAVE £28.00
LIST PRICE £165.95
• 1/2” push-thru sq dr • 60 - 300 Nm / 40 - 220lbs.ft • Length: 575mm • Weight: 1.40kg
80033000 ‘Motorq 330’ - 1/2” Push-Thru Torque Wrench
OFFER £144.95 SAVE £38.00
LIST PRICE £182.95
• 1/2” push-thru sq dr • 60 - 330 Nm / 40 - 240lbs.ft • Length: 684mm • Weight: 1.52kg
80039900 ‘Motorq 399’ - 3/4” Push-Thru Torque Wrench
OFFER £214.95 SAVE £43.00
LIST PRICE £257.95
• 3/4” push-thru sq dr • 80 - 400 Nm / 60 - 300lbs.ft • Length: 684mm • Weight: 2.10kg
80093500 Universal Digital Torque Angle Gauge
• For turning torqued fasteners through a further angle, as per vehicle manufacturers’ specifications • Simple to use: Calibrate, set angle, mount and use • Magnetic attachment • One single tool can be used on 1/4”, 3/8”, 1/2”, 3/4” drives • Fits onto most ratchets, torque wrenches and power bars • Indicates increasing angle on LCD display • Works in both directions of rotation • Audible notice when setting reached • LED’s glow red when setting exceeded
5
OFFER £99.95 SAVE £50.00
LIST PRICE £149.95
AIR TOOLS 902130SP
COMBINED DE A
IDEAL FOR CUTTING BEARING CASES & LOCKING WHEEL NUTS
L!
Micro Die Grinder c/w Bit Set
+
• Includes Micro Die Grinder Bit Set (90213500) containing five shaped ends suitable for precision work • Powerful mini device for small / fine grinding & milling • 1/8” drive / 70,000rpm • Ideal for work in confined spaces
90206000 ‘Vibro-Impact’ Air Hammer
SAVE £68.00
LIST PRICE £335.00
90233000 ‘Vibro-Impact’ Soft End Hammer Set
NEW
90225000
NEW
‘Vibro-Impact’ Pin Set - 6 Pc. • Sizes: 5.2mm, 6.5mm, 6.9mm, 7.7mm, 9.3mm and 12.7mm
• For use with ‘Vibro-Impact’ air hammer (above) • Includes: OFFER £29.95 - Adaptor shaft SAVE £30.00 LIST PRICE £59.95 - Five hammers: 38mm: Medium flat 29mm: Track rod, aluminium, copper and thermoplastic
‘Vibro-Impact’ Socket Set - 7 Pc.
BESTSELLER
• A unique concept to aid the removal of seized suspension parts • The ‘Vibro-Impact’ system allows for the controlled application of force via an air powered impact hammer • Allows the operator to control & gradually increase the force being applied, in order to loosen seized components • Features a built-in shock-absorber in order to minimise risk of damage if too much pressure is accidentally applied • Low vibration for user comfort
OFFER £267.00
90229000
£179.00
£39.95
NEW
• Designed to untighten seized screws, nuts or glow plugs without any damage • To be used with ‘Vibro-Impact’ air hammer (see above) • Vibro-shaft 3/8” square drive • Suitable for bolts, screws, rounded lugs, glow plugs, clamp-on injectors • Special impact sockets with internal edge: 8, 9, 10, 11, 12, 13, 14mm
£89.95
High Quality Air Tools that set the standard for Torque! Impact Wrench Specifications:
Drive
Max Torque Nm (Reverse)
Air Consumption (l / min)
Weight (kg)
Price
90201000
1/2”
1600
1084
94.2
135
1.8
90201500 (Mini)
1/2”
680
500
93.5
130
1.08
680
500
95
134
1.3
3/4”
2600
2000
97
210
3.2
90202500
3/8”
680
500
93.5
130
1.08
90203500
1/4”
90
90
98.2
105
0.9
90204500
1”
3100
2200
110
305
6.8
£179.00 £169.00 £159.00 £499.00 £178.95 £139.00 £725.00
90201300 (Ultra-Short)
1/2”
90202000
Part No.
Torque Nm Noise (Fwd) (dBA)
6
Tel: 01543 679900 www.sykes-pickavant.com
INJECTOR SERVICE & REMOVAL 18590000
NEW
Injector Extractor Kit with Hydraulic Cylinder
• Universal kit complete with hydraulic cylinder for removing seized fuel injectors. Note: Pump not included (20017000) • Hydraulic cylinder with 10 tonnes of force • Can be used as a mechanical kit for confined spaces i.e. against a bulkhead • Can be used as a hydraulic kit for maximum power to help release tightly seized injectors • Suitable for the extraction of diesel fuel injectors specifically: M17 x 1.0 for Bosch, M14 x 1.0 for Delphi, M16 x 1.0 for Toyota adaptor, M20 x 1.0 for Denso and M25 x 1.0 / M27 x 1.0 for Siemens • Can be used in-situ saving time and expense • Adjustable supporting feet allow for angle and position setting • Main side and top bars allow for various engine configurations
£1250.00
08552000 Injector Extractor Kit - PSA Group
NEW
• For removing injector nozzles on 2.0HDI and 2.2HDI - PSA group • Removes tightly fixed injector nozzles without dismantling the cylinder head • Injectors (Bosch / Siemens) can be removed simultaneously • Includes bracket and 6 x screws • Suitable for Peugeot, Citroen, Fiat & Lancia
INCLUDES: • Comprehensive Adaptor Set • FREE leaflets & dispenser • Access to the Fortron-Zone forum • Listing on the Injector Max Garage Directory as featured on our website
£499.00
Injector Extractor Kit - Toyota • To aid the removal of seized / stubborn Denso injectors • Parts of the kit can be mounted together around an injector creating a stable mount for the slide hammer to fix onto - Compact slide hammer allows for use on an engine in-situ • Suitable for Toyota, Nissan, Mazda, Opel / Vauxhall and Lexus
7
Fortron Injector Max Machine Simple and effective method of cleaning both petrol and diesel fuel systems without the removal of injectors from the vehicle
• Engine Codes: DW10: RTH, RHW, 4HW, RHT, RHM, RHR, RHK DW12: 4HX, 4HZ, 4HW, 4HY, 4HT, 4HS, 4HP, 4HR, 4HN
08555000
BESTSELLER
53403500
£1995.00
NEW 31487900 Inline ‘T’ Connector
NEW
• Designed to connect or ‘T’ in between the vehicles own fuel delivery lines and allows the ‘red’ fluid £34.95 output hose to connect, so that RTG additive can be administered into tricky engines where regular connection does not allow an engine to run Fluid Accessories
£299.95 Denso Injectors: - 23670 - 30080 - MB416600 - MB40A - 5870 - 13H50B - 11L 12182 - 23670 - 26011 - 23670 - 0R050 - 10J 06798
Description
Price
53403600
Part No.
Petrol System Cleaning Fluid
£18.49
53403700
Diesel System Cleaning Fluid
£18.49
53403800
Vactek Fluid Bottle
£11.99
53403900
Induction Service Kit - Petrol (Aerosol)
£11.99
53404000
Induction Service Kit - Diesel (Aerosol)
£17.49
53404300
Induction Service Kit - Petrol (Pouring Fluid)
£17.49
12 Packs are available for all Fortron Fluid accessories. Ask your Distributor for details
INJECTOR SERVICE & REMOVAL 18584000 Universal Injector Vibration Tool • Specially designed tool to assist in the removal of stubborn injectors • To be used in conjunction with any suitable injector puller or slide hammer • Includes universal clamp to attach to pulling spindle or injector pulling adaptors where space allows • The main body can be rotated to 4 positions on the horizontal and 4 positions at an angle • Fully adjustable clamp and can be used with or without the tension springs provided • Can be attached and locked in place with the two adjustable locking handles • The tool can be used whilst the injector is under hydraulic / mechanical tension or before tension is applied • The tool can also assist in other pulling applications
NEW
£449.00 08585000 Heavy Duty Slide Hammer Injector Removal Kit • For the removal of Bosch, Delphi Denso and Siemens injectors • Features a flexible u-joint adaptor for access in restricted areas • Includes 6 x Injector adaptors, 4 x Injector Solenoid removers and 2 x Nozzle Extractors
FREE!
FREE! DIESEL INJECTOR SEAT CLEANER SET (017500V2 - WORTH £219.00 See page 11 for details)
WHEN YOU PURCHASE 185800V2P1
SAVE £50.00
LIST PRICE £295.00
185800V2P1 Hydraulic Injector Puller Kit c/w Hydraulic Pump and FREE Diesel Injector Seat Cleaner Set
• Provides controlled force to aid the removal of seized / stubborn injectors where there is insufficient access for traditional slide hammers • Includes a multi-position frame, with adjustable legs of different lengths and a selection of mounting adaptors to allow alignment of the tool with the injectors on a wide variety of modern diesel engines • Supplied with injector adaptors for most modern injector types • 10 tonnes Hydraulic Hollow Cylinder provides the force • Includes aluminium bodied hand pump - 2 Speed, 10,000psi fitted with gauge, hydraulic hose and ¾” hydraulic coupler
OFFER £1295.90 SAVE £386.00
LIST PRICE £1681.90
185810V2
185800V2
Mechanical Hydraulic Injector Puller Kit
Hydraulic Injector Puller Kit only
• As per 185800V2P1 (above) excluding hydraulic pump and free Diesel Injector Seat Cleaner Set
OFFER £245.00
£999.95
• As per 185800V2 kit (left) but includes a mechanical hydraulic ram • Allows use of the kit without the need for a separate hydraulic pump OFFER £1099.95 SAVE £100.00 LIST PRICE £1199.95
8
Tel: 01543 679900 www.sykes-pickavant.com
DIESEL GLOW PLUG 085900V2 Vibro Impact Glow Plug Remover Set
Square Drive
• For the removal of 8, 9, 10, 11 & 12mm glow plugs • Uses controlled impact torque to create vibration • Includes 4 low-torque settings for controlled vibration (10, 20, 30, 40Nm) • Supplied with special long-reach 8, 9, 10, 11 & 12mm glow plug sockets, long and short extensions and universal joint for ease of access
NEW
¼”
Max Torque - Right
40Nm
Max Torque - Left
10 / 20 / 30 / 40Nm
Air Inlet Air Consumption
OFFER £215.00 SAVE £44.95
¼” 250 ltrs / min
Speed
12,000 per min
Air Supply
6.3bar / 90psi
LIST PRICE £259.95
08594000 Universal Glow Plug Removal Master Kit
• Complete set for removing broken glow plugs: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25 • Kit includes 4 x special milling cutter tools (3 pcs with 4 cuttings and 1 pc with 2 x cuttings) with self-centering helicoidal tip for universal use - Individual centering adaptors are not required • Quick and easy removal - also allows the user to restore the thread for installation of the new glow plug
£849.00
Specifications: Dimension A ≥ 14mm (M10) Dimension A ≥ 20mm (M9, M8) Dimension L ≤ 13mm L (thread)
Universal Glow Plug Removal Kits
NEW
4 x special milling cutter tools with self-centering twist drill bit for universal use without the need for any dedicated centering aids
Part No.
Glow Plug Size
Dimension A ≥
Dimension L ≤
Price
08594100
M10 x 1.0 / M10 x 1.25
14mm
13mm
£485.00
08594900
M9 x 1.0
20mm
13mm
£365.00
08594800
M8 x 1.0
20mm
13mm
£365.00
08596000 Universal Glow Plug Tip Extraction Master Kit
NEW
9
NEW
Suitable for removing the final part of the electrode in case of breakage / seizure of the glow plug inside its seat
• Complete kit for glow plugs electrode extraction: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25 • Includes all the necessary tools (9 x extraction rods, 4 x glow plug guides and 1 x slide hammer) to safely remove the terminal part of the glow plug electrode without damaging the cylinder head
UNIVERSAL KIT
Glow Plug Tip Extraction Kits M8, M9 & M10 08596100 Glow Plug Tip Extraction Kit - M10 x 1.0 • Suitable for M10 thread size
£139.00
08596800 Glow Plug Tip Extraction Kit - M8 & M9
£275.00
• Suitable for M8 sized glow plug tips • Also suits M9 glow plug tip removal by using the same M8 size in the slightly larger M9 female thread of the cylinder head
£139.00
DIESEL GLOW PLUG & ENGINE SERVICE
£245.00
08597000 Universal Glow Plug Reamer Kit
NEW
• For cleaning the glow plug shaft and the sealing seat in the cylinder head • Includes thread sizes: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25
Glow Plug Reamers Part No.
Glow Plug Size
Price
08597800
M8 x 1.0
£95.00
08597900
M9 x 1.0
£95.00
08597100
M10 x 1.0 / M10 x 1.25
£95.00
08595300 Glow Plug Repair Kit
NEW
UNIVERSAL KIT
• Complete kit for repairing glow plugs and spark plugs • Glow Plug Sizes: M8 x 1.0, M9 x 1.0, M10 x 1.0, M10 x 1.25 and M12 x 1.25 • Spark Plug Sizes: M12 x 1.25 and M14 x 1.25
31467500
£465.00
MADE IN THE UK
Diesel Fuel System Bleeding Kit • Designed to allow the user to bleed / prime the low pressure feed side of the diesel fuel system • Contains common sized low pressure pipe sets including: - Standard 8mm, 10mm and newer 9.65mm (3/8 inch) - Renault small & large - Ford • Typical coverage includes: Citroën, Fiat, Ford, Land Rover, Peugeot, Renault, Volvo & Vauxhall • Clear pipes for visability of air bubbles
OFFER £149.95
38360000 Universal Engine & Gearbox Support
SAVE £50.00
31467000
OFFER £375.00
Diesel Fuel System Bleeding Kit Master Kit
LIST PRICE £399.95
SAVE £24.95
• Includes 31467500 kit (left) plus a low pressure fuel gauge (10bar), tee piece and ratchet pump • Gauge and tee piece enables the same pipes to be used for both bleeding and fuel pressure
LIST PRICE £199.95
OFFER £199.95 SAVE £54.99
LIST PRICE £254.94
• Designed to support the engine or gearbox when the engine mountings have been removed - e.g. When replacing timing / drive belts, water pumps etc • Designed for all makes of vehicle - No need for costly model specific brackets • The unit is suspended from the chassis via the support hooks, the engine / gearbox is supported by the support pad and is counter-balanced against the underside of the vehicle by the support arms • Fully adjustable in all dimensions: - Extension: Min 630mm / Max 960mm - Support Plate Adjustment: 190mm
08529500 Seal Removal & Replacement Kit
OFFER £64.95 SAVE £39.30
LIST PRICE £104.25
• Remove & install awkward seals as found on engines, gear boxes, power steering pumps etc • Universal coverage for seals 27-58mm diameter • Includes seal puller, long & short extracting hooks for seals - e.g. on camshafts or crankshafts and a selection of bushes, sleeves and mandrels for installing new seals
10
Tel: 01543 679900 www.sykes-pickavant.com
ENGINE SERVICE OFFER £179.95
017500V2
SAVE £39.05
Diesel Injector Seat Cleaner Set
LIST PRICE £219.00
• Cleans injector seats and chambers when changing or reconditioning diesel injectors • Helps to avoid blow-back due to poorly seated injectors • Includes: Removal tool for copper washers, injector blanking plugs, wire brush cleaning set and centralising stem
03430900 10 Pc. ATF Refill Adaptor Set
LIST PRICE £43.95
• Single lever design enables quick and easy use • Provides breaker bar strength for maximum holding force • Allows adjustment of cam gear once installation is complete
£69.95
08550500
03860000 Strap Type Oil Filter Remover - For all filters up to 300mm diameter • Multi-purpose strap wrench, ideal for all oil filters up to 300mm circumference • Range: 20 to 300mm diameter • Strap Length: 1 metre long & 40mm wide • Double ended 13/16” hex c/w 3/8” & 1/2” sq. dr
5th Gear Puller - Ford
• A quick & simple method of removing the fifth gear on Ford FWD transmissions, before carrying out internal repairs
SAVE £30.00
- Ford VXT-75 Gearbox: - Ford IB5 Gearbox: Galaxy / Transit / Transit Connect Fiesta / Ka / Focus - Ford MTX-75 Gearbox: Focus / C-Max / Mondeo / Jaguar X Type
OFFER £15.95 SAVE £19.00
LIST PRICE £34.95
ALLOWS FOR UNATTENDED OPERATION
53404500 Fortron Power Steering Flush Machine • Replaces 100% of steering fluid • Takes on average 10 minutes per service • Extends the service life of (often overlooked) system • Revitalises and conditions ‘o’ rings and seals
• Can replace up to 100% of transmission fluid • Specify exact amount of fluid to change • Digital control panel allows for fully automated control • Safely cleans up and extends the service life of automatic transmissions • Includes comprehensive adaptor set
£3495.00 53405500
£995.00
Fortron Automatic Transmission Fluid Flush Machine - Manual
• Manual controls for ATF exchange process • Complete fluid exchange, including cooler, converter and cooler lines • Includes range of fittings and adaptors
£2199.00
Fluid Accessories Part No. 53402600
OFFER £69.95 LIST PRICE £99.95
Applications:
Fortron Automatic Transmission Fluid Flush Machine - Fully Auto
11
SAVE £9.00
Universal Timing Gear Holder
• Includes set of 10 adaptors for topping-up sealed transmissions • Suitable for a variety of vehicles including: Audi, BMW, Ford, Honda, Mercedes, Nissan, Toyota, Volvo and VW
53402500
OFFER £34.95
07759700
Description
Price
ATF Flush Service Kit
£11.49
Fluid Accessories Part No. 53404600
Description
Price
Power Steering Flush Service Kit
£11.49
12 Packs are available for all Fortron Fluid Accessories. Ask your Distributor for details Further details of the Fortron range can be found on our website: www.sykes-pickavant.com
SUSPENSION WORKSTATIONS
SIMPLY THE BEST... SPRINGS HAVE EVOLVED...HAVE YOUR TOOLS? AUTOMATIC JAW LEVELLING PIVOTS TO COMPENSATE & HOLD ALL COIL SPRINGS INCLUDING LEFT HAND COILS
FULL HEIGHT STEEL SAFETY GATES
INTERCHANGEABLE JAWS / VICE TO SUIT DIFFERENT SPRINGS
LENGTH OF TRAVEL: 330MM SAFETY SWITCH PREVENTS OPERATION WHEN GATES ARE OPEN
TOP ARMS & JAWS ADJUST AND LOCK TO SECURE SPRING
ADJUSTABLE STRUT VICE WITH 4 x SETTING OPTIONS
UNIQUE DOUBLE DEPTH FRONT PLATE ALLOWS SAFE WORK ON EXTRA-LONG STRUT ASSEMBLIES
UP TO 2452KG OF FORCE (AT 10 BAR) AT THE PRESS OF A PEDAL
4 x FLOOR MOUNTING HOLES FOR INSURANCE COMPANY COMPLIANCE
385800SP HEAVY DUTY PNEUMATIC COIL SPRING COMPRESSOR WORKSTATION
OFFER £1595.00 SAVE £150.00
Universal piece of equipment for assembling and disassembling struts and coil springs on cars, 4WD’s and LCV’s. Includes 2 x standard brackets (78-130mm / 125-205mm) and 1 x strut vice
INCLUDES
FREE
39 Pc. Universal Shock Absorber Tool Set
• Enables the piston rod to be held whilst allowing the nut to be loosened / tightened • Includes - 2-tap & slot-profile socket - D-profile / Slotted / T-profile bits - 6-pt sockets & bits - M12 - XZN bit • Ideal for use with 3858 compressor workstation
£149.95
ADAPTOR BRACKET SET (38780100) Suitable for Mercedes C Class (W203) up to 2007 Compatible with new range of Mercedes brackets 38480800 / 38480900 / 38481000
WORTH £159.95
08921000
LIST PRICE £1745.00
38480200 Upper Jaw Set
£42.95
• For high compression and close coil springs (Toyota / Honda etc)
38480800 Mercedes Bracket
NEW
• For: Mercedes C Class (W204) 2008-2014 and E Class Coupe (W207 / C207) 2009 onwards - Front springs MADE IN THE UK
OFFER £159.95 SAVE £20.00
LIST PRICE £179.95
12
Tel: 01543 679900 www.sykes-pickavant.com
SUSPENSION WORKSTATIONS
THE BEST SPRING PROGRAMME ON THE MARKET 385800-60 Workstation Arm Extender - Pair
385800-61 Workstation Swivel Jaws - Pair
• Mounts onto top arms in place of standard top jaws & contacts directly onto spring • Jaw ‘floats’ to follow changes in spring angle / profile during compression • Constant contact with the coil spring surface area for increased safety • Able to work on both left and right handed coil springs when used in conjunction with brackets below
• Mounts between original top arm and jaw attachment • Use to extend the length of the top spring mounting jaw position • Can be used singly to provide 10mm extension or as a pair for 20mm ext
£149.95
£69.95 MADE IN THE UK
38580200 Jaw Holder
£99.95
• For use with 3858 & 3868 workstation brackets • Includes 3 x hanging hooks and 4 x slots for brackets
38580400 Coil Spring Clamp
• Tool to secure coil spring into lower bracket
• Designed to hold the coil spring still during initial compression and restrict twisting through the bracket
£49.95 38480400 Special Bracket
38480500 Special Bracket
38480600 Special Bracket
• For VW Touareg / Porsche Cayenne
• For Mercedes C Class 2010-
• For Nissan Qashqai
£99.95
£179.95
38480900
MADE IN THE UK
NEW
£119.95 38481000
MADE IN THE UK
Mercedes Bracket
Mercedes Bracket
• For Mercedes C Class (W205) 2015 onwards OFFER £159.95 - Front springs SAVE £20.00
• For Mercedes ML Class 163 1997-2005 - Rear OFFER £159.95 SAVE £20.00 springs
LIST PRICE £179.95
LIST PRICE £179.95
38780100
38480700 Double Depth Strut Vice • For use with extra long strut assemblies • Chrysler Voyager
£117.95
13
NEW
NEW
Adaptor Bracket Set • Suitable for Mercedes C Class (W203) up to 2007 • Compatible with new range of Mercedes brackets 38480800 / 38480900 / 38481000
£159.95
SUSPENSION
NEW
08512800 Astra H Rear Axle Body Bush Kit • To remove and install the rear axle body bush on the vehicle • Suitable for: - Astra H 2004 onwards - Meriva B 2010 onwards - Zafira B 2005 onwards
£169.00 MADE IN THE UK
£199.00
BESTSELLER
08756000
Ford Transit Bearing Press Kit
Successful removal of troublesome inner bearing race and reinstallation of complete bearing assembly • For the removal and installation of the front wheel bearing on Ford Transits 2000-2013 with the aid of a workshop press • Suitable for bearings on both 5 & 6 stud hubs
REMOVES BOTH THE INNER & OUTER BEARING RACE WITHOUT CUTTING OR HEATING
08253800
£139.95
MADE IN THE UK
Ford Transit Rear Disc Separator Kit
• Press solution for removing the rear disc from the bearing hub • The hub bearings on this type of Transit often seize in place, requiring extreme force to separate • Suitable for Ford Transits 2000 onwards (where rear discs are fitted - 5 stud)
08260300 Ford Transit Wheel Hub & Brake Disc Assembly Remover
• For removal of the front brake disc and hub assembly on Ford Transits from 2001 - 2013 • OEM Code: 204-345B
Bearing References: SNR: R152.58 SKF: VKBA3589 Optimal: 302 255 Febi: 45355
08256000
NEW
OFFER £59.95 SAVE £40.00
LIST PRICE £99.95
ON VEHICL SOLUTIONE
Ford Transit Ball Joint Tool - Manual Option
• For the removal & installation of the lower front ball joints as found on Ford Transits 2000-2013 • Designed to support ball joint during installation - helps eliminate premature ball joint failure • Manual option includes screw converter allowing the user to utilise an existing SP hydraulic ram
MADE IN THE UK
08269000 Ford Transit Lower Arm Bush Tool
£172.50
£99.00
• For the removal and replacement of the large rear bush on the lower arms of Ford Transits from 2000 – 2013 • Designed to be used with a 187000V2 press frame and ram • On vehicle solution with minimal strip down • Can also be used in a workshop press for lower arms when they have been removed from the vehicle • Applications: Ford Transit Mk5 & Mk6 from 2000 to 2013 • OE Bush Numbers covered: 4042024, 4372132, 4540787 & 7372131
Hydraulic option also available (18256000) that includes 12 Tonne SP hydraulic ram
14
Tel: 01543 679900 www.sykes-pickavant.com
SUSPENSION 18780500
OFFER £199.95
CAN BE USED WITH AN IMPACT GUN
SAVE £50.00
Universal C-Clamp
LIST PRICE £249.95
• For the dismantling / installation of suspension components on the vehicle • Jaw opening: 245mm • Throat depth: 100mm • Includes adaptors for use with the 08780000 and XS Sleeve kits • Designed to allow greater access in restricted situations and where the universal press frame is not suitable • Special ‘trapezoidal’ threaded screw, allows for the application of greater force • Base cup works with gold and silver rings from the SP press frame (18700100 / 187000V2) • Includes impact screw which can be removed and replaced with a hydraulic ram (1500 & 1800 Series)
08730500 Fiesta Mark VI Rear Bush Kit
NEW
£169.00
18771000 Land Rover Swivel Ball Joint Adaptor Set
OFFER £169.95 SAVE £30.00
LIST PRICE £199.95
• New “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 ‘98 – ‘04 and Range Rover P38A ‘94 – ‘02
• For the installation and removal of the rear axle body mounting bush found on Fiesta Mark VI 2008 onwards
MADE IN THE UK
187403V3 Mercedes Sprinter Ball Joint Adaptor Set
£199.00
UPDATED SET
• Updated set now includes new cup for common aftermarket arms • For the removal and installation of ball joints on Mercedes Sprinter ‘95 -’06 and revised ‘06 onwards models (901, 902, 903, 904 and 906) • Applications: - Sprinter ‘95 onwards - VW Crafter & Sprinter ‘06 onwards - VW LT ‘96 - ‘06
Opel Movano / Renault Master / Nissan Interstar Ball Joint Adaptor Sets • For the removal and installation of upper and lower ball joints as fitted to the following: - Nissan Interstar ‘02 onwards - Opel Movano ‘98 onwards - Renault Master II ‘98 onwards
187502V3 Adaptor Set - UPPER Ball Joint
187503V3 Adaptor Set - LOWER Ball Joint
• Adaptor set from main kit (187512V3) for use on upper ball OFFER £79.00 SAVE £20.00 joints
• Adaptor set from main kit (187512V3) for use on lower OFFER £79.00 SAVE £20.00 ball joints
LIST PRICE £99.00
LIST PRICE £99.00
Adaptor Sets for Focus / Fiesta Trailing Arm Bushes
• For the removal and installation of trailing arm bushes • Adaptors can be used in a press frame with either a 18704100 pressure screw (recommended) or a hydraulic ram* MADE IN THE UK
18732100 Adaptor Set for Fiesta Trailing Arm Bushes
*Note - Adaptor Ring 18780400 required
£99.95
Applications: Fiesta ‘95-’02, KA ‘96-’08 and Puma ‘96-’02 For full application details, please visit our website: www.sykes-pickavant.com
15
18732200 Adaptor Set for Focus Trailing Arm Bushes
£99.95
Applications: C-MAX ‘07- MPV, MKI ‘98-’04, MKII ‘04-, Kuga ‘08-, Mazda 3 (BK) ‘03-’09, Mazda 5 (CR/CW) ‘05- MPV, Volvo C30 ‘06-, Volvo C70 II ‘07-, Volvo S40 II ‘04-’12 and Volvo V50 ‘04-’12
SUSPENSION 08135500
NEW
GEN3 Wheel Bearing Kit
ON VEHICL SOLUTIONE
• Designed to remove the hub and bearing from aluminium multi-link suspension units with the aid of a pressure screw, adjustable legs and top plate to accommodate the different size bearings as found on VW group vehicles • This procedure is currently carried out with repeated heavy blows using a hammer to remove the heavily corroded bearing which can easily damage surrounding components such as steering knuckles and ball joints or fracture the aluminium wishbone Applications: Audi: A4 00-, A5 07-, A6 97-, A7 10-, A8 94-, Q5 08-, R8 07Seat: Exeo 08- VW: Passat 03-
BUY THE BEST!
• Universal tool set for extracting and drawing-in of bushes, bearings, seals etc • Contains 20 x Press Sleeves in 2mm dia. steps • Inside Dia. Range: 34 - 72mm • Outside Dia. Range: 44 - 82mm
XS Sleeve Kit - Basic
GEN2 All Sizes Master Kit
• 62 / 66 / 72 / 78 / 82 / 85mm sizes: - 62mm: Audi A2, VW Lupo (Front) - 66mm: Skoda Fabia, VW Fox (Front), Polo - 72mm: Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) - 78mm: Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 - 82mm: Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70 - 85mm: VW Multivan, Touareg, Transporter (Front / Rear)
£845.00
£299.95
08790000 XL Basic Kit - SUV / LCV
Universal Press & Pull Sleeve Kit Car / LCV Kit
08785500
BESTSELLER
Individual Kits also available - Please contact Sykes-Pickavant for further information
Bearing Reference: FAG: 5745, 5726, 5739, 5478, 5744 SKF: VKBA 6557, VKBA 3536, VKBA 6547, VKBA 6546, VKBA 6649 SNR-NTN: R157.45, R157.26, R157.40, R154.57, R157.43
08780000
081220V2
£249.00
• For use as an add-on to the standard 08780000 kit (left) • Inside Dia. Range: 82 - 88mm & 98 - 104mm • Outside Dia. Range: 92 - 98mm & 108 - 114mm
£379.00 IDEAL FOR BALL JOINTS
• For use as an add-on to the 08780000 kit (above) to increase applications for smaller bushes and ball joints • Contains 10 x Press Sleeves in 2mm dia. steps • Inside Dia. Range: 14 - 32mm • Outside Dia. Range: 24 - 42mm
18705500 Press Frame Extension Legs & Nose Piece
£694.95 08786500 XS Sleeve Kit - Master
£325.00
• Stand alone kit for smaller bush applications • Contains 10 x Press Sleeves in 2mm diameter steps • Inside Dia. Range: 14 - 32mm • Outside Dia. Range: 24 - 42mm
FOR USE WITH THE ‘0878’ RANGE OF SLEEVE KITS
£49.95
• New kit designed for use with the 0878 range of sleeve kits • Extends the 187 press frame - internal capacity from 200 to 300mm • Pair of 100mm legs fit onto original 187 press frame legs • Extra extension legs can be added to further increase length • Nose piece connects press frame ram with 4 x step plate discs from the 0878 range of sleeve kits
16
Tel: 01543 679900 www.sykes-pickavant.com
INDUCTION
SP INDUCTION HEATER RANGE - 3 VERSIONS NOW AVAILABLE! All Sykes-Pickavant Induction Heaters use high frequency magnetic fields to create induction heat. When ferrous metallic objects are placed inside these magnetic fields, they heat up in SECONDS expanding the metal which allows for fast and easy release • Operates cooler for better efficiency, handling and product longevity • Long operating cycle time • Includes 3 x coil attachments • Durable reinforced thermal plastic housing with slip resistant grenade style grip
• Integrated CE filter improves handling of product • LED light illuminates work area • 1 year warranty - Parts/Labour • Carry Case with storage for all attachments
For further details please visit: www.sykes-pickavant.com
96020000
9602012V
SP 230v Induction Heater +
SP 12v Induction Heater +
• Specifically designed for the UK/EU: 230v / 6 amp / 1000 watt with full CE certification
SUMMER SPECIA
L
• Specifically designed for the UK/EU: 12v / 70 amp / 840 watt with full CE certification • Completely portable - works with any 12v battery pack or 12v battery
12V BATTERY OPERATED
£395.00
N.B. Not included
£595.00
ONLY ONE ON THE MARKET!
THE REST JUST CAN’T TAKE THE HEAT! 96021100
IDEAL FOR SITE WORK
SP 110v Induction Heater +
• Specifically designed for the UK/EU: 110v / 6 amp / 1000 watt with full CE certification • Provides safe and near instant heat for site work, construction and factory maintenance users • Replaces the need for open flame options when heating components, making the completion of on-site risk assessments far easier
N.B. Not included
£595.00
Choose from the following accessories that are compatible with our full range of Induction Heaters 96015000 SP Coil Kit
£99.95
• 8 x popular sizes of interchangeable coils
960260SP SP Rope Coil Set - x3
• Contains 3 x highly adaptable coils allowing user to shape to suit
£74.85
17
96025000 SP Heat Pad
£67.95
• For the removal of decals, graphics, stripes, emblems & body mouldings etc • Softens the adhesive to make removal simple & effective
AIR CONDITIONING New Range of Air Conditioning Machines
NEW
Allows for the quick and efficient service of air con systems - cleaning the AC system, replacing refrigerant and ensuring a cool vehicle on any journey Each machine includes the following:
AIR PURGE SYSTEM - New function that helps the user to manage the discharge of non-condensable gases, replacing the traditional method of a manual check using the vessel pressure gauge 100% RECHARGE - Super Charge exploits the machine’s operation to obtain the same condition that would otherwise be created by means of vessel heating systems OIL CLEAN - No more waste. This function can force recovered oil discharge in the final phase, saving gas. VACUUM BEYOND REPAIR - Equipped with a high performance vacuum pump, reaching the best vacuum level more rapidly LONG LIFE PUMP - Allows an extension of up to 1000 hours of the average life of the pump oil used in the machine ECO LOCK COUPLERS® - Equipped with ECO LOCK® quick couplers, preventing gas wastage during removal - safeguarding operator safety and protecting the environment.
6000 Range
• Easy to operate • 12L recharge vessel • 1 Year Warranty included
Part No.
• 65kg - Easy to manoeuvre • Includes printer • Additional 2 Year Warranty also available - Ask for details
Description
Price
35023500
6000 PLUS Air Conditioning Machine - R-134a
£1995.00
35024900
6000 ECO 1234 Air Conditioning Machine - R-1234yf
£2225.00
ALL MACHINES INCLUDE AN INTEGRATED PRINTER
8500 Range
• Easy to operate • 20L recharge vessel • 1 Year Warranty included
Part No.
• 86kg • Includes printer • Additional 2 Year Warranty also available - Ask for details
Description
Price
35020300
8500 PLUS Air Conditioning Machine - R-134a
£2695.00
35020600
8500 1234 PLUS Air Conditioning Machine - R-1234yf
£2995.00
Range of Optional Accessories available: (See website for full details) 35013000 Nitrogen Leak Test Kit
35012900 Hybrid Pro Kit
£140.00
£68.00
35005300 Flushing Kit for R134a
35019800 Flushing Kit for R1234yf
£200.00
£280.00
Note: Warranty Updates include: 2 x pcs dryer filter, 2 x pcs vacuum pump oil (500ml) and 2 x database updates Training can also be provided on site for £100.00 for up to 6 people - Please ask for details
18
Tel: 01543 679900 www.sykes-pickavant.com
WORKSHOP EQUIPMENT
Silver Series range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm back-run system & V blocks • Heavy duty steel frame • Two speed pump • Overload safety valve • Automatic arm return • Pressure gauge • V blocks • Manufactured in the EU • Piston over-travel limit stop • Winch for table (For models 53436400 & 53436500)
Width Depth Bed Depth Rating Height (mm) (mm) (mm) (mm)
Range (mm)
Weight (kg)
Price
53436000*
15T
1930
920
650
170
85 - 950
150
£624.00
53436200*
20T
2030
940
650
180
65 - 1030
165
£744.00
53436300*
25T
2030
950
650
180
70 - 1030
170
£944.00
53436400*
30T
2060
1120
650
200
115 - 1020
230
£999.00
53436500
50T
2290
1220
650
210
70 - 1065
370
£1624.00
*Recommended for use with Universal Press Support Block - 08770000 - See below N.B. For deliveries made outside UK Mainland, an additional carriage charge will apply
Optional accessories including press plates and press piece sets are also available. For details, please visit: www.sykes-pickavant.com
08770000
Part No.
Other sizes of press are available - Contact Customer Services for details
SUITABLE FOR USE WITH PRESSES UP TO 30T
Universal Press Support Block
• Easily press bearings on a variety of suspension arms • Three point contact guarantees a perfect, safe support • Adjustable height anvil bolts • Swivel element for added versatility • Suitable for use with presses up to 30T
£219.00
Mechanical Headlight Beam Testers - MOT Approved & Pre-Inspection
• Features rotating column with adjustable mirror visor for accurate alignment to vehicle • Luxmeter with graduated analogue scale for accurate light intensity measurement • Easily adjustable vertical sliding mechanism by self lubricating sliders • Features built in MOT beam checking panel SUITABLE FOR ALL HEADLIGHT TYPES INCLUDING XENON
02695000 Pre-Inspection Headlight Beam Tester • Portable base on 3 wheels (self install only) • Column height: 1.66m
£595.00
NEW
02683000 MOT Approved Headlight Beam Tester - LV • 3.7 metre rail kit / column height: 1.66m • Base mounted on double rail for ease of use (self install only) £635.00
02688000 MOT Approved Headlight Beam Tester - HGV • 5.2 metre rail kit / column height: 1.66m • Base mounted on double rail for ease of use (self install only)
£745.00
Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: sales@sykes-pickavant.com www.sykes-pickavant.com ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE PRICES VALID UNTIL 30TH SEPTEMBER 2016 - REF: SPQ316GBP COPYRIGHT 2016 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED.
Distributor Stamp: