Sykes-Pickavant October - December 2016 New Products & Special Offers Promotional Brochure

Specialist Tool Solutions

NEW PRODUCTS & SPECIAL OFFERS OCTOBER - DECEMBER 2016

Tel: 01543 679900 www.sykes-pickavant.com

SUSPENSION 08512800 Astra H / Zafira Rear Axle Bush Kit

NEW

£169.00

• To remove and install the rear axle body bush on the vehicle • Suitable for: Astra H (L48) ‘04- Astra GTC (L08) ‘05Astra H Box (L70) ‘04- Astra Estate (L35) ‘04Astra Saloon (L69) ‘07- Astra TwinTop (L67) ‘05Meriva B ‘10- Zafira B (A05) ‘05-

08730500

NEW

£169.00

Fiesta Mark VI Rear Axle Bush Kit • For the installation and removal of the rear axle body mounting bush found on Fiesta Mark VI 2008 onwards

Ford Transit Ball Joint Tool

08269000 Ford Transit Lower Arm Bush Tool

• For the removal and replacement of the large rear bush on the lower arms of Ford Transits from 2000 – 2013 • Designed to be used with a 187000V2 press frame and ram LE ON VEHICN • On vehicle solution with O TI SOLU minimal strip down • Can also be used in a workshop press for lower arms when they have been removed from the vehicle

ON SOLUTION

• Manual option includes screw converter allowing the user to utilise an existing SP hydraulic ram • Hydraulic option includes 12 Tonne SP hydraulic ram Part No.

• Applications: Ford Transit Mk5 & Mk6 from 2000 to 2013 • OE Bush Numbers covered: 4042024, 4372132, 4540787 & 7372131

£99.00

MADE IN THE UK

• For the removal & installation of the lower front ball joints as found on Ford Transits ‘00-’13 • On vehicle solution provides time saving benefits • Tool designed to access the awkward location of the ball joint VEHICLE

Description

Price

08256000

Manual Option

£172.50

18256000

Hydraulic Option

£249.00

*Note - Hydraulic ram included in 18256000 only

Adaptor Sets for Focus / Fiesta Trailing Arm Bushes • For the removal and installation of trailing arm bushes • Adaptors can be used in a press frame with either a 18704100 pressure screw (recommended) or a hydraulic ram* *Note - Adaptor Ring 18780400 required

18732100 Adaptor Set for Fiesta Trailing Arm Bushes

£99.95

Applications: Fiesta ‘95-’02, KA ‘96-’08 and Puma ‘96-’02

18732200 Adaptor Set for Focus Trailing Arm Bushes

£99.95

Applications: C-MAX ‘07- MPV, MKI ‘98-’04, MKII ‘04-, Kuga ‘08-, Mazda 3 (BK) ‘03-’09, Mazda 5 (CR/CW) ‘05- MPV, Volvo C30 ‘06-, Volvo C70 II ‘07-, Volvo S40 II ‘04-’12 and Volvo V50 ‘04-’12

For full application details, please visit our website: www.sykes-pickavant.com

1

MADE IN THE UK

Removal of trailing arm bush using kit 18732100

SUSPENSION 08135500 GEN3 Wheel Bearing Kit

LE ON VEHICN IO T SOLU

£299.95

08756000 Ford Transit Bearing Press Kit

Successful removal of troublesome inner bearing race and reinstallation of complete bearing assembly • For the removal and installation of the front wheel bearing on Ford Transits 2000-2013 with the aid of a workshop press • Suitable for bearings on both 5 & 6 stud hubs

• Designed to remove the hub and bearing from aluminium multi-link suspension units with the aid of a pressure screw, adjustable legs and top plate to accommodate the different size bearings as found on VW group vehicles • This procedure is currently carried out with repeated heavy blows using a hammer to remove the heavily corroded bearing which can easily damage surrounding components such as TIME SAVING TOOL steering knuckles and ball joints or fracture the aluminium wishbone

REMOVES BOTH THE INNER & OUTER BEARING RACE WITHOUT CUTTING OR HEATING

Applications: Audi: A4 ‘00-, A5 ‘07-, A6 ‘97-, A7 ‘10-, A8 ‘94-, Q5 ‘08-, R8 ‘07Seat: Exeo ‘08- VW: Passat ‘03-

MADE IN THE UK

BESTSE LLER

Bearing Reference: FAG: 5745, 5726, 5739, 5478, 5744 SKF: VKBA 6557, VKBA 3536, VKBA 6547, VKBA 6546, VKBA 6649 SNR-NTN: R157.45, R157.26, R157.40, R154.57, R157.43

£199.00 081220V2 GEN2 All Sizes Master Kit

BESTSELLER

62 / 66 / 72 / 78 / 82 / 85mm sizes: - 62mm: Audi A2, VW Lupo (Front) - 66mm: Skoda Fabia, VW Fox (Front), Polo - 72mm: Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) - 78mm: Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 - 82mm: Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70 - 85mm: VW Multivan, Touareg, Transporter (Front / Rear)

£845.00

Individual Kits also available - Please contact Sykes-Pickavant for further information

08253800

08260300 Ford Transit Wheel Hub & Brake Disc Assembly Remover

• For removal of the front brake disc and hub assembly on Ford Transits from 2001 - 2013 • Enables the disc to be salvaged • OEM Code: 204-345B

OFFER £59.95 SAVE £40.00

LIST PRICE £99.95

Ford Transit Rear Disc Separator Kit

MADE IN THE UK

£139.95

• Press solution for removing the rear disc from the bearing hub • The hub bearings on this type of Transit often seize in place, requiring extreme force to separate • Suitable for Ford Transits 2000 onwards (where rear discs are fitted 5 stud) Bearing References: SNR: R152.58 SKF: VKBA3589 Optimal: 302 255 Febi: 45355

2

‘VIBRO-IMPACT’ AIR HAMMER & ACCESSORIES 90225000 6 Pc. ‘Vibro-Impact’ Pin Set • Includes Sizes: 5.2mm, 6.5mm, 6.9mm, 7.7mm, 9.3mm and 12.7mm

£39.95

90229000 7 Pc. ‘Vibro-Impact’ Socket Set

• Designed to untighten seized screws, nuts or glow plugs without any damage • Suitable for bolts, screws, rounded lugs, glow plugs, & clamp-on injectors • Vibro-shaft 3/8” square drive • Special impact sockets with internal edge: 8, 9, 10, 11, 12, 13, 14mm

NEW 90233000 ‘Vibro-Impact’ Soft End Hammer Set

• Adaptor shaft and five hammers: 38mm: Medium flat 29mm: Track rod, aluminium, copper & thermoplastic

OFFER £29.95

£89.95

90227000

SAVE £30.00

LIST PRICE £59.95

90236100

90206000

‘Vibro-Impact’ Needle Scaler

‘Vibro-Impact’ Air Hammer £79.95

Tel: 01543 679900 www.sykes-pickavant.com

‘Vibro-Impact’ Sheet Metal Cutter Chisel

£33.95

BESTSELLER

90238500

90236200

‘Vibro-Impact’ Concave Hammer Insert

‘Vibro-Impact’ Separator Chisel

£29.95

£33.95

90237100

90236300

‘Vibro-Impact’ Pin - 6.5mm

‘Vibro-Impact’ Half Round Chisel

OFFER £267.00 SAVE £68.00

£37.95 90237500 ‘Vibro-Impact’ Exhaust Chisel Set

£33.95

LIST PRICE £335.00

Individual Spare Parts (Included with 90206000)

• Set of 2 x chisels for cutting the inner and outer exhaust tube 90221000

£74.95 3

90222000

90223000

90228000

Part No.

Description

Price

90221000

‘Vibro-Impact’ Tie Rod Separator Bit

£24.95

90222000

‘Vibro-Impact’ Hammer Bit

£24.95

90223000

‘Vibro-Impact’ Ball Joint Separator Bit

£33.95

90228000

‘Vibro Impact’ 1/2 Sq. Drive Bit

£27.95

9020600C Hammer Kit

• Includes: - Needle scaler (90227000) - Concave hammer insert (90238500) - 6.5mm pin insert (90237100)

OFFER £129.00 SAVE £18.85

LIST PRICE £147.85

SUSPENSION 18705500 Press Frame Extension Legs & Nose Piece

MADE IN THE UK

• Extends the 187 press frame - internal capacity from 200 to 300mm • Pair of 100mm legs fit onto original 187 press frame legs

187000V2 Universal Press Frame c/w 12 Tonne Hydraulic Ram • Updated 12T hydraulic ram includes pre-loading 30mm hex allowing easier operation 50% more power than standard SP hydraulic ram • Open frame design - 200mm of clearance through the press frame

£298.95

£49.95 08780000

08790000

Universal Press & Pull Sleeve Kit - Car / LCV Kit

XL Basic Kit - SUV / LCV

• Universal tool set for extracting and drawing-in of bushes, bearings, seals etc • Contains 20 x Press Sleeves in 2mm dia. steps • Inside Diameter Range: 34 - 72mm • Outside Diameter Range: 44 - 82mm

• For use as an add-on to 08780000 kit (left) • Inside Dia. Range: 82 - 88mm & 98 - 104mm • Outside Dia. Range: 92 - 98mm & 108 - 114mm

£694.95

£379.00

Opel Movano / Renault Master / Nissan Interstar Ball Joint Adaptor Sets • For the removal and installation of upper and lower ball joints as fitted to the following: - Nissan Interstar ‘02 onwards - Opel Movano ‘98 onwards - Renault Master II ‘98 onwards

187502V3 Adaptor Set - UPPER Ball Joint • Adaptor set from main kit (187512V3) for use on upper ball joints

187503V3 Adaptor Set - LOWER Ball Joint • Adaptor set from main kit (187512V3) for use on lower ball joints

187403V3

UPDATED SET

Mercedes Sprinter Ball Joint Adaptor Set

• For the removal & installation of ball joints on Mercedes Sprinter ‘95 -’06 and revised ‘06 onwards models (901, 902, 903, 904 & 906) • Updated set now includes new cup for ON VEHIC common aftermarket arms

LE SOLUTION

£99.00

£199.00 £99.00

Applications: - Sprinter ‘95 onwards - VW Crafter & Sprinter ‘06 onwards - VW LT ‘96 - ‘06 *Note - Press Frame not included

4

Tel: 01543 679900 www.sykes-pickavant.com

BATTERY CARE Lithium Booster Pack New range of lightweight lithium powered booster packs • Super lightweight - approximately a 1/3 of the weight per HP of a regular booster • PCB control of lithium power pack provides guaranteed booster power & life • High output double insulated cables (35mm thick on 461002SP and 50mm thick on 461003SP & 460005SP) • Cable Length - 2 metres • Automatic Charger - 1.3a Part No.

Description

Voltage

Cranking HP Weight Amps Rating

SUPER LIGHTWEIGHT & ULTIMATE LITHIUM POWER

NEW

Price

461002SP

HD Lithium Booster

12v

800

300

4.5kg

£635.00

461003SP

HD Lithium Booster

12v

1200

600

5.5kg

£895.00

460005SP

Super HD Lithium Booster

24v

1200

1000

8kg

£1395.00

SYKES-PICKAVANT EXCLUSIVE WINTER SPECIAL 861002SP - Pro-Start 800

861002SP1 Pro-Start 800 Booster Pack with Free 12v 2 Amps Accu-Smart Battery Charger

+

• 12v Pro-Start 800 Booster Pack with 800 cranking amps and 2370 peak amps • Includes free Accu-Smart 12v 2 Amps battery charger (845122SP) Suitable for Wet (Lead Acid), AGM, Gel & Fleece type batteries

Pro-Start Booster Pack

INCLUDES FREE ACCU-SMART

WORTH £47.95!

845122SP Accu-Smart 12v 2 Amps Battery Charger

£365.95

ALL UNITS HAVE: LIFETIME CASE WARRANTY & 2 YEAR BATTERY WARRANTY

• Double insulated starting cables – 1.30 / 1.35 mtrs length • Illuminated voltmeter indicates booster charge level, booster & alternator function • Curved jaw clamps, fully insulated – blue clamp with LED lamp • Shock resistant case

Part No. 861041SP

Description SOS Booster 440

861001SP Pro-Start 700

“All booster packs include a mains 240V smart charger to maintain peak battery condition for long life & maximum performance”

Pro-Start 761001SP Plus 1400 Pro-Start 761006SP Plus 1600

Voltage

Cranking Amps

Peak Amps

Price

12v

440

1600

£170.95

12v

700

1860

£283.49

3720 / 1860 4740 / 2370

£669.49

12/24v

1400 / 700

12/24v

1600 / 800

Propulstation Booster Pack with Docking Station Eliminate the risk and frustration of an uncharged booster pack!

• Robust shell case design with 5mm shatterproof polyethylene • Long & flexible cables with double insulation • Robust, wide-opening clamps include copper trace carrying the current to the bronze jaws & protecting the spring against over-heating

5

Part No.

Description

Voltage

Cranking Amps

Peak Amps

Price

521001AC

Propulstation

12v AC

700

1860

£469.95

521001DC

Propulstation

12v DC

700

1860

£427.49

521002AC

Propulstation

12v AC

800

2370

£535.95

521002DC

Propulstation

12v DC

800

2370

£494.49

Choose from: - AC Model Supplied with mains AC charger for workshop / showroom use - DC Model Supplied with 5m cable and one-way diode for connection to vehicle electrics (Ideal for recovery vehicles)

£885.95

WORKSHOP TOOLS Retractable Hose Reels Air / Water

NEW

Size

53399000

20m x 10mm

Inlet: 3/8”

53399100

18m x 12mm

Inlet: 1/2”

NEW

• Compact design • PVC hose • 180 degree pivoting wall bracket • Polypropylene case • Brass swivel assembly • 53399600 - Suitable for compressed air up to 10 bar working pressure and 53399700 - Suitable for compressed air up to 20 bar working pressure

• Spring driven retractable hose reel c/w wall mounting brackets • Polypropylene case • Suitable for compressed air or cold water up to 17 bar working pressure • Heavy duty rubber air / water hose to ISO EN 2398 standard Part No.

Retractable Hose Reels Air only

Connection

Price

Part No.

Size

Outlet: 3/8”

£199.95

53399600

9m x 8mm

Inlet: 1/4”

Outlet: 1/4”

£74.95

Outlet: 1/2”

£199.95

53399700

15m x 10mm

Inlet: 1/4”

Outlet: 1/4”

£89.95

Price

01493500 Digital LCD Circuit Tester

03202500 Start / Stop Battery & Electrical System Analyser

• Tests 6V-12V batteries and 12V-24V volt charging & starting systems • Operating range: 40-2000 CCA • Bad connection warning • Tests EFB, VRLA / GEL, AGM Flat Plate, AGM Spiral and regular liquid batteries • Rating system: SAE (CCA) / DIN / EN / IEC & JIS

Connection

• For 6, 12 & 24v systems • Features crocodile clip with spring cable extendable to 3m • LED indication for power (red) and ground (green) • Stainless steel probe • Small testing current <10mA

OFFER £279.95 SAVE £20.00

LIST PRICE £299.95

800400SP INCLUDES FREE CASE ‘Motorq 400’ - 3/4” Push-Thru Heavy Duty Torque Wrench

£24.95

£402.00

• 150 - 700 Nm / 100 - 500lbs.ft • Length: 1150mm • Weight: 6.30kg

INCLUDES FREE CASE 800500SP ‘Motorq 500’ - 3/4” Push-Thru Heavy Duty Torque Wrench

£412.00

• 300 - 1000 Nm / 200 - 750lbs.ft • Length: 1475mm • Weight: 7.30kg

INCLUDES FREE CASE 800550SP ‘Motorq 550’ - Stepped 3/4” to 1” Heavy Duty Torque Wrench • 1” Sq. Dr (uses ¾” to 1” stepped convertor) • 700 - 1500 Nm / 500 - 1000lbs.ft • Length: 1475mm • Weight: 10.40kg

325200SP Portable 4 Gas Analyser with Printer

£618.00 MADE IN THE UK

INCLUDES INFRA-RED PRINTER

• For fault diagnosis, tuning and pre-MOT testing • Truly portable hand-held gas analyser - Ultra light weight - only 1.1kg • Measures CO, HC, CO2, O2 (NOx model option available on request) to Class 1 accuracy • Suitable for both petrol and LPG vehicles and ideal for both static and dynamic testing • Internal memory stores up to 250 test results • Up to 4 hours internal battery life • Pump speed control - Improves battery life • Includes printer and AC / 12v chargers • Provides Lambda / AFR measurement & corrected CO • Bluetooth connectivity to PC (Free analytical software available to download)

WORTH £295.95!

£1495.00 6

Tel: 01543 679900 www.sykes-pickavant.com

TESTING 314650V2 Common Rail Diesel (CRD) High Pressure Test Kit

£549.95

• Includes unique pressure limiting valve in-built to prevent extreme pressures building in test kit during engine cranking • Measures delivery pressure output from the CRD (Common Rail Diesel) High Pressure pump under engine cranking conditions • Cranking test to show a “healthy” 250+ Bar output, gauge reads up to 600 Bar • Electronic sensor tester reads and displays the high pressure signal from the actual high pressure sensor output point – allowing comparison to a code readers displayed data • Includes shaped high pressure connector pipes (x5) (M12 x 1.5 & M14 x 1.5 connections)

314660V2

(CRD) High Pressure Test Set

OFFER £369.95 • As per 314650V2 kit above excluding electronic sensor tester

31467000

SAVE £30.00

LIST PRICE £399.95

31467600 Ratchet Pump Kit

Diesel Low Pressure Testing & Bleed Kit

• Connects to 3/8” drive air ratchet to replace the hand pump to generate faster flow • Retaining bracket holds pump during use for one-hand operation

• Gauge and tee piece enables the same pipes to be used for both bleeding and fuel pressure testing • Includes low pressure fuel gauge (10bar), tee piece and ratchet pump

Note: Suitable for diesel fuel systems only

£99.95

OFFER £375.00 SAVE £24.95

LIST PRICE £399.95

31467500

MADE IN THE UK

Diesel Fuel System Bleeding Kit

• Allows the user to bleed / prime the low pressure feed side of the diesel fuel system • Contains common sized low pressure pipe sets including: - Standard 8mm, 10mm and newer 9.65mm (3/8 inch) - Renault small & large - Ford OFFER £149.95 • Typical coverage includes: Citroën, Fiat, Ford, Land Rover, SAVE £50.00 Peugeot, Renault, Volvo & Vauxhall LIST PRICE £199.95 • Clear pipes for visability of air bubbles

31470000

31440000

Oil Pressure Test Kit

• Helps to diagnose worn oil pumps, faulty oil pressure switches and pressure warning indicators • Dual scale gauge: 0 - 10bar, 0 - 150psi • 1m long flexible hose • Small profile, quick coupling adaptors with built-in shut-off valve • 10 x oil switch port adaptors • Supplied in plastic case with foam insert

7

Catalyst Back Pressure / Vacuum Tester

OFFER £172.95 SAVE £10.00

LIST PRICE £182.95

• Measures the back pressure (or vacuum) via the Lambda sensor socket, to indicate blocked or damaged catalytic converters • Calibrated gauge scale indicates progressive pass / fail for tests at idle speed and for tests under load • 2m heat resistant pipe OFFER £159.95 • Suitable for M12 x 1.25 and M18 x 1.5 SAVE £18.00 Lambda (oxygen) sensor sockets LIST PRICE £177.95 • Includes 2 x Lambda Sensor Socket Connectors, 2 x thread cleaners and a special adaptor for Toyota Vehicles • Supplied in plastic case with foam insert

TESTING 31370000

FOR BOTH PETROL & DIESEL ENGINES

Combined Petrol & Diesel Cylinder Leakage Tester Kit

• Provides a direct indication to the location of the leak by measuring the rate of loss of compression for individual cylinders • Helps to diagnose worn / broken piston rings, burnt / leaking valves and faulty head gaskets • Includes a selection of glow plugs and an adjustable dummy injector • Supplied with M12 and M14 brass quick release spark plug adaptors

£249.95

31370500 Petrol only Cylinder Leakage Tester Kit

• As per kit above excluding glow plugs & dummy injector

£149.95

31407500

NEW

Petrol Engine Compression Tester - Quick-Release Kit

• Specially designed for deep seated spark plug ports with long narrow threads, as found on many modern petrol engines • Includes M12 and M14 spark plug adaptors - M12 spark plugs are now commonly being used by: Alfa Romeo, Audi, BMW, Citreon, Dacia, Fiat, Ford, Hyundai, Jaguar, Kia, Land Rover, Mercedes, Mini, Nissan, Peugeot, Renault, Seat, Skoda, Smart, Toyota and VW • Positive lock - quick release connector, ensures adaptors cannot accidentally be left in the spark plug port • Specially designed self-centering adaptors ensure minimal risk of cross threading when attempting to screw the compression adaptor in to the spark plug port • Gauge Scale: 0 - 20bar, 0 - 190psi

£109.95

314200V3 Diesel Engine Compression Test Kit - Car

NEW

• Comprehensive glow plug test kit for common diesel engines • Checks engine compression under cranking conditions and enables cylinder access through glow plug adaptors • Built-in pressure relief valve enables repeat tests without dismantling • Includes: - Gauge (0-60 bar, 0-860 psi) & Hose Assembly - 12 x Dummy Glow Plugs (3 x M8, 2 x M9, 7 x M10) • Covers: Alfa, BMW, Citroen, Dacia, Fiat, Ford, Mini, Nissan, Peugeot, Saab, Subaru, Suzuki, VW Group & Volvo

£199.95

NEW

31434900 Universal Common Rail Injector Set • To be used with diesel compression gauge (31420100) • Enables compression test to be achieved through injector port • Can also be connected to dummy glow plugs to extend the length for improved access

31429100 Glow Plug Add-On Kit

31462000 Common Rail Diesel (CRD) Fuel Return Flow Kit

£90.00

NEW

• Set of 7 x glow plugs to enhance the coverage of the diesel compression kit • Includes following adaptors: - 2.2TDI Land Rover and newer 2.2HDI PSA / Ford - 2.2 / 2.5DCI G9T / G9U Renault Opel / Vauxhall / Nissan £99.95 - 2.0DCI / 2.3CDTI M9R/M9T Renault Opel / Vauxhall / Nissan - 2.0 / 3.0CDI Merc / Sprinter 2009 on - 2.3 / 3.0JTD Fiat / Iveco - 2.0 / 2.2D / 2.4D Toyota - 1.7CDTI Opel / Vauxhall / Honda Note: Image shown for illustrative purposes only

• Designed for use on the injector return side of a CRD system • Helps to diagnose: poor / no engine starting, poor engine running & acceleration / general lack of engine power • Includes graduated acrylic measuring block for up to six cylinders, injector adaptor sets for Bosch / Delphi / Denso / Siemens, set of reduction pipes and hanging hook

OFFER £139.95 SAVE £60.00

LIST PRICE £199.95

Suitable for solenoid injectors only

8

Tel: 01543 679900 www.sykes-pickavant.com

ENGINE SERVICE 08597000

085900V2

Universal Glow Plug Reamer Kit

Vibro Impact Glow Plug Remover Set

• For cleaning the glow plug shaft and the sealing seat in the cylinder head • Includes thread sizes: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25

£245.00

Glow Plug Reamers Part No.

Glow Plug Size

Price

08597800

M8 x 1.0

£95.00

08597900

M9 x 1.0

£95.00

08597100

M10 x 1.0 / M10 x 1.25

£95.00

NEW

08595300 Glow Plug Repair Kit

• Complete kit for repairing glow plugs and spark plugs • Glow Plug Sizes: UNIVERSAL KIT M8 x 1.0, M9 x 1.0, M10 x 1.0, M10 x 1.25 and M12 x 1.25 • Spark Plug Sizes: M12 x 1.25 and M14 x 1.25

£465.00 08596000 Universal Glow Plug Tip Extraction Master Kit

• Complete kit for glow plugs electrode extraction: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25 • Includes all the necessary tools (9 x extraction rods, 4 x glow plug guides and 1 x slide hammer) to safely remove the terminal part of the glow plug electrode without damaging the cylinder head

Glow Plug Tip Extraction Kits

9

NEW

• For the removal of 8, 9, 10, 11 & 12mm glow plugs • Uses controlled impact torque to create vibration • Supplied with special long-reach glow plug sockets, long and short extensions and universal joint for ease of access Square Drive

¼”

Max Torque - Right Max Torque - Left

40Nm 10 / 20 / 30 / 40Nm

Air Inlet

¼”

Air Consumption

250 ltrs / min

Speed

12,000 per min

Air Supply

6.3bar / 90psi

OFFER £215.00 SAVE £44.95

LIST PRICE £259.95

NEW

08594000 Universal Glow Plug Removal Master Kit

• Complete set for removing broken glow plugs: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25 • Kit includes 4 x special milling cutter tools (3 pcs with 4 cuttings and 1 pc with 2 x cuttings) with self-centering helicoidal tip - Individual centering adaptors are not required • Quick and easy removal - also allows the user to restore the thread for installation of the new glow plug

£849.00

Specifications: Dimension A ≥ 14mm (M10) Dimension A ≥ 20mm (M9, M8) Dimension L ≤ 13mm L (thread)

Universal Glow Plug Removal Kits

£275.00

Kits include slide hammer assembly, 3 x concentric roller sockets and 4 x special milling cutter tools with self-centering twist drill bit for universal use without the need for any dedicated centering aids Part No.

Glow Plug Size

Dimension A ≥

Dimension L ≤

Price

08594100

M10 x 1.0 / M10 x 1.25

14mm

13mm

£485.00

Part No.

Glow Plug Size

Price

08596100

M10 x 1.0

£139.00

08594900

M9 x 1.0

20mm

13mm

£365.00

08596800

M8 & M9

£139.00

08594800

M8 x 1.0

20mm

13mm

£365.00

ENGINE SERVICE Pc. Multi-Stage Injector Pulling Kit for M9R 2.0 Dci Engines 18582000 24 Renault / Nissan / Opel

SOLUTION E T E L P M O THE C NGINES FOR M9R E

• Kit includes 12 tonne mechadraulic cylinder with 8mm stroke • Provides 5 different solutions for the various ways that M9R injectors fail / break in the cylinder head, from full injector removal to injector nozzle tip solutions • Kit components are profiled to match the shape of the cylinder head and components, to ensure a positive mounting from which to pull injectors • Stage by stage solutions avoid cylinder head removal - saving time and cost

A

MULTI-STAGE INJECTOR PULLING OPTIONS Refer to images A & B for visual guidance

1. Complete Injector Removal (including top electronic control module) Achieved via a fork and plate combination that firmly grips around the upper part of the injector body

NEW

2. Injector with top electronic control module removed Achieved via fastening components onto the upper body in combination with the injector upper thread

4 3 5

1 2

£1350.00

3. Broken Injector Body or Unscrewed Mid Section Achieved via a threaded connector screw that fixes into the injector valve body and nozzle retainer 4. Seized or Broken Injector Nozzle Achieved via an expanding rod that pulls nozzle body, together with a special magnetic tool for core disassembly

B

1 3

4

5

5. Seized or Broken Injector Nozzle Tip 2 Connects into nozzle tip via internal thread, to repair damaged original threads or cuts new ones if needed. Allows a strong pulling connection into the injector nozzle cone. This operation includes a sealing nozzle cap to prevent metal filings and swarf from passing into the lower engine area

Injector Pulling Kit for M9R 2.0 Dci Engines 18582200 Multi-Stage Renault / Nissan / Opel - EXCLUDING CYLINDER

18586500

NEW

UNIQUE PATENTED SLIMLINE DESIGN

£995.00

NEW

18587000 Ram Adaptor Kit

12T Mechadraulic Cylinder

• Unique patented design attaches spindle direct to cylinder • Lightweight and slimline (45mm depth body) ideal for under-bulkhead operation • 8mm stroke • Threaded cylinder bore removes the need for a locking nut, increasing clearance - Includes M18 x 1.5 insert • Manually operated cylinder (no need for hydraulic pump), with non-slip grip handle

£359.00

• Kit includes 18586500 (left) and 5 x specific threaded inserts to attach spindles direct to cylinder • Suitable for: - M10, M12, M14, and M16 x 1.25 - M18 x 1.5

£389.00

18582700 Injector Extractor Kit - Renault

• For removing injectors using a mechanical screw system • Engine removal not required • Injectors: Bosch • Suitable for: Renault, Nissan, Opel • Engine Code: F9Q • Engine: 1.9dCI

FOR F9Q ENGINES

£299.95 10

Tel: 01543 679900 www.sykes-pickavant.com

ENGINE SERVICE OFFER £799.00

185800V2 Hydraulic Injector Puller Kit

SAVE £200.95

LIST PRICE £999.95

• Provides controlled force to aid the removal of seized / stubborn injectors where there is insufficient access for traditional slide hammers • Includes a multi-position frame, with adjustable legs of different lengths and a selection of mounting adaptors to allow alignment of the tool with the injectors on a wide variety of modern diesel engines • 10 tonnes Hydraulic Hollow Cylinder provides the force • Includes injector adaptors for most modern injector types

Hydraulic Injector 185810V2 Mechanical Puller Kit

• As per 185800V2 kit (see above) but includes a mechanical hydraulic ram • Allows use of the kit without the need for a separate hydraulic OFFER £799.00 pump SAVE £400.95

INCLUDES MEC ANICAL HYDRAULIC HRA M

LIST PRICE £1199.95

Hydraulic Injector Puller Kit 185800V2PP Mechanical c/w Hydraulic Pump

INCLUDES • As per 185800V2 kit (see above) but includes an HYD aluminium bodied hydraulic hand pump - 2 Speed, RAULIC PUMP 10,000psi fitted with gauge, hydraulic hose and ¾” hydraulic coupler OFFER £995.00 SAVE £400.00

LIST PRICE £1395.00

08585000 Heavy Duty Slide Hammer Injector Removal Kit

OFFER £245.00 SAVE £50.00

LIST PRICE £295.00

• For the removal of Bosch, Delphi Denso and Siemens injectors • Features a flexible u-joint adaptor for access in restricted areas • Includes 6 x Injector adaptors, 4 x Injector Solenoid removers and 2 x Nozzle Extractors

08559000 8 Pc. Injector Removal Forks & Adaptor Set - For use with 08585000 & 185800V2 • Add-on kit for use with 08585000 Heavy Duty Slide Hammer Injector Removal Kit and 185800V2 Hydraulic Injector Puller Kit Includes: Applications include: - Adaptors to attach to the external thread of the - Citroen C5 / Jumpy / Xsara injectors - Fiat Ducato JTD - Forks to attach to the body of the injector - Peugeot 206 / 307 / 406 / - Sockets to allow the injector to be pulled from Boxer (2.0 / 2.2 / 2.3 HDI) different locations - Mercedes-Benz CDI • Hook sizes: 12, 13.5, 16 and 26mm OFFER £79.95 (exc. A-Class (Sprinter / Vito) • Optional Convertor (08580470) also available to SAVE £20.00 - Opel Renault F9Q work with slide hammers with 5/8 UNF threads LIST PRICE £99.95

18590000 Injector Extractor Kit with Hydraulic Cylinder

• Universal kit complete with hydraulic cylinder for removing seized fuel injectors Note: Pump not included (20017000) • Hydraulic cylinder with 10 tonnes of force • Can be used as a mechanical kit for confined spaces - i.e. against a bulkhead • Can be used as a hydraulic kit for maximum power to help release tightly seized injectors • Suitable for the extraction of diesel fuel injectors specifically: M17 x 1.0 for Bosch, M14 x 1.0 for Delphi, M16 x 1.0 for Toyota adaptor, M20 x 1.0 for Denso and M25 x 1.0 / M27 x 1.0 for Siemens • Adjustable supporting feet allow for angle & position setting • Main side & top bars allow for various engine configurations

£1250.00

18590100 Injector Extractor Kit excluding Hydraulic Cylinder

11

£975.00

ENGINE SERVICE 18581500 Injector Adaptor Set For Denso & Siemens

NEW

• For dismantling and extracting Denso & Siemens injectors • Twin screw - internal / external injector fixing ensures maximum contact during extraction • Includes: - Siemens M25 x 1 and M14 x 1 adaptor - Denso M25 x 0.75 adaptor - Denso M25 x 0.5 adaptor - F/F Extension M18 x 1.5 - Denso & Siemens injector valve spindle dismounting tool

08552500 Injector Extractor Hydraulic Kit - Mercedes

NEW

• Allows for the removal of tightly fixed injector nozzles and injectors on Mercedes 2.1L, 2.2L, 3.0 V6 and Chrysler 300C without removal of the cylinder head • Compact mechadraulic cylinder allows for use in OFFER £579.00 confined spaces e.g where injector SAVE £40.00 is under bulkhead LIST PRICE £619.00 • Engine removal not required • Injectors: Bosch (2.1L / 2.2L), Delphi (3.0) • Mercedes: Vito, Vario, CLK, Sprinter, Viano, Class: M, GL, C, GLK, E, CLS, S, R and G

£194.95

08551500

08555000 Denso Injector Extractor Kit

£299.95

Injector Extractor Hydraulic Kit Mercedes excluding Cylinder

£260.00

08551400

• To aid the removal of seized / stubborn Denso injectors • Parts of the kit can be connected around an injector creating a stable mount for the slide hammer to fix onto

Injector Extractor Mechanical Kit - Mercedes

£210.00

18584000 • Compact slide hammer allows for use on an engine in-situ • Suitable for Opel / Vauxhall, Kia, Hyundai, Toyota, Nissan, Mazda & Lexus

08552000 Injector Extractor Kit - PSA Group • For removing injector nozzles on 2.0 & 2.2 HDI - PSA group • Removes tightly fixed injector nozzles without dismantling the cylinder head • Injectors (Bosch / Siemens) can be removed simultaneously • Suitable for Peugeot, Citroen, Fiat & Lancia Engine Codes: DW10: RTH, RHW, 4HW, RHT, RHM, RHR, RHK DW12: 4HX, 4HZ, 4HW, 4HY, 4HT, 4HS, 4HP, 4HR, 4HN

Denso Injectors: - 23670 - 30080 - MB416600 - MB40A - 5870 - 13H50B - 11L 12182 - 23670 - 26011 - 23670 - 0R050 - 10J 06798

£499.00

Universal Injector Vibration Tool

• Specially designed tool to assist in the removal of stubborn injectors • To be used in conjunction with any suitable injector puller or slide hammer • Includes universal clamp to attach to pulling spindle or injector pulling adaptors where space allows • Fully adjustable clamp and can be used with or without the tension springs provided • Can be attached and locked in place with the two adjustable locking handles • The tool can be used whilst the injector is under hydraulic / mechanical tension or before tension is applied • The tool can also assist in other pulling applications

The main body can be rotated to 4 positions on the horizontal and 4 positions at an angle

£449.00 12

Tel: 01543 679900 www.sykes-pickavant.com

WORKSHOP TOOLS

INTRODUCING THE NEW...

HANDHELD INDUCTION HEATER NEW 96040000

Venom™ Induction Heater +

AVAILABLE NOVEMBER

Generates Invisible Heat® to release corroded and thread locked metal components without the danger of an open flame • Angled Design with Trigger • Coil Twist Lock™ • LED Usage Indicator • Fault Override Delay • User Controlled LED Switch • Fan Operation Enhancements • Two Year Warranty • Includes 3 x Coils

2 YEAR WA

RRANTY

Applications include: • ABS Sensors • Brake Bleeder Nuts • Exhaust System • Fuel Tank Straps • Heat Treating • Inline Connectors • Metal Fabrication

902130SP

• O2 / DPF Sensors • Truck Bed Bolts • Body Panel Dents • Tie Rod / Ball Joint Ends • Suspension Components • Steering Components • U-Bolts

£595.00

MICRO DIE GRINDER C/W BIT SET

• Includes Micro Die Grinder (90213000) and Bit Set (90213500) containing five shaped ends suitable for precision work • Powerful mini device for small / fine grinding & milling • 1/8” drive / 70,000rpm

COMBINED DEAL!

+

IDEAL FOR CUTTING BEARING CASES, LOCKING WHEEL NUTS & EXHAUSTS

£179.00

High Quality Air Tools that set the standard for Torque!

Impact Wrench Specifications: Drive

Max Torque Nm (Reverse)

Torque Nm (Fwd)

Noise (dBA)

Air Consumption (l / min)

Weight (kg)

Price

90201000

1/2”

1600

1084

94.2

135

1.8

90201500 (Mini)

1/2”

680

500

93.5

130

1.08

90201300 (Ultra-Short)

1/2”

680

500

95

134

1.3

90202000

3/4”

2600

2000

97

210

3.2

90202500

3/8”

680

500

93.5

130

1.08

90203500

1/4”

90

90

98.2

105

0.9

90204500

1”

3100

2200

110

305

6.8

£179.00 £169.00 £159.00 £499.00 £178.95 £139.00 £725.00

Part No.

13

WORKSHOP EQUIPMENT UPDATED DESIGN

534551V2 Press Guard

08770000 Universal Press Support Block

• Steel construction and grille mesh designed to increase workshop safety • High visibility finish • Lift and lock hinge mechanism for easy opening and closing • Bolt on clamp to mount onto most types of workshop press • Sliding width adjustment to cover most sizes of press beds

• Press bearings on a variety of suspension arms • Three point contact guarantees a perfect, safe support • Adjustable height anvil bolts • Swivel element for added versatility • Numbered system for recording specific apps • Suitable for use with presses up £219.00 to 30T

£119.95

Silver Series range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm back-run system & V blocks • Heavy duty steel frame • Automatic arm return • Manufactured in the EU

• Two speed pump

• Pressure gauge • Piston over-travel limit stop

• Overload safety valve • V blocks • Winch for table* (* For models 53436400 & 53436500)

Part No.

Width Depth Bed Depth Rating Height (mm) (mm) (mm) (mm)

Range (mm)

Weight (kg)

Price

£624.00 £744.00 £999.00 £1624.00

53436000*

15T

1930

920

650

170

85 - 950

150

53436200*

20T

2030

940

650

180

65 - 1030

165

53436400*

30T

2060

1120

650

200

115 - 1020

230

53436500

50T

2290

1220

650

210

70 - 1065

370

*Recommended for use with Universal Press Support Block - 08770000 - See below N.B. For deliveries made outside UK Mainland, an additional carriage charge will apply Other sizes of press are available - Contact Customer Services for details

HYDRAULIC WORKSHOP PRESS C/W PRESS SUPPORT BLOCK SPECIAL DEAL PRICE WHEN PURCHASING A 20T OR 30T WORKSHOP PRESS & PRESS SUPPORT BLOCK Part No.

Rating

List Price

Save

Offer Price

534362SP

20T

£963.00

£123.00

534364SP

30T

£1218.00

£123.00

£840.00 £1095.00

53402500

ALLOWS FOR UNATTENDED OPERATION

Fortron Automatic Transmission Fluid Flush Machine - Fully Auto

• Can replace up to 100% of transmission fluid • Specify exact amount of fluid to change • Digital control panel allows for fully automated control • Safely cleans up and extends the service life of automatic transmissions • Includes comprehensive adaptor set

£3495.00

COMBINED DE A

+

Universal Press Support Block

• Easily press bearings on a variety of suspension arms • Three point contact guarantees a perfect, safe support • Adjustable height anvil bolts • Swivel element for added versatility • Suitable for use with presses up to 30T

L!

20T OR 30T PRESS

53405500 Fortron Automatic Transmission Fluid Flush Machine - Manual • Manual controls for ATF exchange process • Complete fluid exchange, including cooler, converter and cooler lines • Includes range of fittings & adaptors

£2199.00

Fluid Accessories for ATF Machines Part No. Description Price 53402600

ATF Flush Service Kit

£11.49

14

Tel: 01543 679900 www.sykes-pickavant.com

SUSPENSION WORKSTATION

SIMPLY THE BEST...

SPRINGS HAVE EVOLVED...HAVE YOUR TOOLS? 385800SP Heavy Duty Pneumatic Coil Spring Compressor Workstation Universal piece of equipment for assembling and disassembling struts and coil springs on cars, 4WD’s and LCV’s.

Includes 2 x standard brackets: (78-130mm / 125-205mm) and 1 x strut vice UP TO 2452KG OF FORCE (AT 10 BAR) AT THE PRESS OF A PEDAL

SAFETY SWITCH PREVENTS OPERATION WHEN GATES ARE OPEN

ADJUSTABLE STRUT VICE WITH 4 x SETTING OPTIONS

FULL HEIGHT STEEL SAFETY GATES

LENGTH OF TRAVEL: 330MM

TOP ARMS & JAWS ADJUST AND LOCK TO SECURE SPRING

4 x FLOOR MOUNTING HOLES FOR INSURANCE COMPANY COMPLIANCE

INTERCHANGEABLE JAWS / VICE TO SUIT DIFFERENT SPRINGS

AUTOMATIC JAW LEVELLING PIVOTS TO COMPENSATE & HOLD ALL COIL SPRINGS INCLUDING LEFT HAND COILS

UNIQUE DOUBLE DEPTH FRONT PLATE ALLOWS SAFE WORK ON EXTRA-LONG STRUT ASSEMBLIES

INCLUDES FREE 38480200

Upper Jaw Set

£42.95

Suitable for Mercedes C Class (W203) up to 2007 Compatible with new range of Mercedes brackets 38480800 / 38480900 / 38481000 (see below)

38480800 Mercedes Bracket

• For Nissan Qashqai

£119.95

15

£179.95

MADE IN THE UK

• For Mercedes C Class (W205) 2015 onwards - Front springs

38481000 Mercedes Bracket

WORTH £159.95

MADE IN THE UK

• For Mercedes C Class (W204) 2008-2014 and E Class Coupe (W207 / C207) 2009 onwards - Front springs

38480900 Mercedes Bracket

Nissan Qashqai Bracket

SAVE £150.00

LIST PRICE £1745.00

ADAPTOR BRACKET SET (38780100)

• For high compression and close coil springs (Toyota / Honda etc)

38480600

OFFER £1595.00

£179.95

MADE IN THE UK

• For Mercedes ML Class 163 1997-2005 - Rear springs

£179.95

COOLING

AVOID THE PRESSURE WITH OUR COOLING SYSTEM TEST KITS...

Provides an effective solution when pressure testing the cooling system to help locate internal & external leaks 331595V2 ‘315’ Series Cooling System Pressure Test Kit

SUITABLE FO VEHICLES WITR MODERN OVERFLOW AT H IN-BUILT THE TOP OF EXPANSION TA NK

• Includes: - Hand Pump with Pressure Gauge & Quick-Release fitting - Hose Assembly c/w quick-release fitting - 16 x Threaded cap adaptors - 3 x Bayonet Fitting cap adaptors - 1 x Cap Adaptor wrench

Now covers more: DAF, Renault, Caterpillar, Optare, MAN, Dart, Komatsu, JCB, Volvo construction and agricultural vehicles • Includes: - Metal bodied hand pump with Pressure Dual Gauge & Quick-Release fitting - Hose Assembly c/w quick-release fitting - 10 x Reservoir & Radiator pressure caps

OFFER £239.95

OFFER £237.00

SAVE £60.00

SAVE £52.95

LIST PRICE £289.95

331400V2 XL Cooling System Pressure Test Kit

LIST PRICE £299.95 Note: Full application details can be found on our website: www.sykes-pickavant.com

33195000 Combustion Leakage Tester

SPECIAL OFFER

331942SP

!

Standard Reaction Fluid 6 Pack

• Fast and accurate diagnosis of cylinder head gasket leaks

• Includes 6 x 250ml bottles of standard reaction fluid

• Suitable for use with both petrol & diesel engines • Supplied with standard and sensitive reaction test fluid (100ml) • Quick connector for use with: Sykes-Pickavant 315 / 316 / 317 Series Cap Adaptors

OFFER £19.95 SAVE £9.75

LIST PRICE £29.70

2 PACK

032000SP

£69.95

Reaction fluid also available to purchase individually: 33194200 - Standard 250ml 33194400 - Sensitive 250ml

53401500 Fortron Coolant Flush Machine

Antifreeze & Coolant Hydrometers • For testing ethylene glycol and polypropylene glycol • Temp range: -5°C to -40°C

OFFER £15.95 SAVE £7.95

LIST PRICE £23.90

QUICK & CLEA N COOLANT FLU SOLUTION FOR SH / EXCHANG E

• Effective way of flushing and exchanging the complete cooling system fluid • Air operated and portable - Suitable for all types of coolants & vehicles • Includes a set of multi-application adaptor fittings • Hot and cold coolant flush capability • Synchronised operation – Provides a controlled flow of new fluid under pressure and draws old fluid out of system using adjustable vacuum Fluid Accessories

Part No. 53401600

Description

Price

Coolant Flush Treatment Additive

£11.49

£1995.00

Coolant Flush Treatment Additive - 12 Pack also available (534016-12)

16

Tel: 01543 679900 www.sykes-pickavant.com

WORKSHOP EQUIPMENT PROVED P A A S V D

SP800MOT MOT Emission Testing Station DVSA Approved

NEW

INCLUDES: 1. Petrol Emission Gas Analyser

User friendy emission analyser that offers combined petrol and diesel emission testing to the highest standard - meeting all UK MOT requirements • Combined Gas & Smoke analyser • Includes a high quality, sturdy cabinet providing useful storage space and handy side shelves allow for safe storage of gas and diesel analysers • PC based Windows operating system with laser printer and large 19” LCD colour monitor with easy to navigate graphics • Wireless RPM & Temp readings via handheld control pad • High quality European product • Fast warm up / measuring time • Fast pass and bets test configured

2. Diesel Smoke Meter

3. Handheld Control Pad

£5395.00

For further details please visit our website: www.sykes-pickavant.com

ALL MACH IN INTEGRATES INCLUDE AN ED PRINTE R

New Range of Air Conditioning Machines Allows for the quick and efficient service of air con systems - cleaning the AC system, replacing refrigerant and ensuring a cool vehicle on any journey

Each machine includes the following:

NEW

AIR PURGE SYSTEM - New function that helps the user to manage the discharge of non-condensable gases, replacing the traditional method of a manual check using the vessel pressure gauge 100% RECHARGE - Super Charge exploits the machine’s operation to obtain the same condition that would otherwise be created by means of vessel heating systems OIL CLEAN - No more waste. This function can force recovered oil discharge in the final phase, saving gas VACUUM BEYOND REPAIR - Equipped with a high performance vacuum pump, reaching the best vacuum level more rapidly LONG LIFE PUMP - Allows an extension of up to 1000 hours of the average life of the pump oil used in the machine

35020300

ECO LOCK COUPLERS® - Equipped with ECO LOCK® quick couplers, preventing gas wastage during removal - safeguarding operator safety and protecting the environment

6000 Range

• Easy to operate • 12L recharge vessel • 1 Year Warranty included

• 65kg - Easy to manoeuvre • Includes printer

35023500

8500 Range

• Easy to operate • 20L recharge vessel • 1 Year Warranty included

• 86kg • Includes printer

Part No.

Description

Price

Part No.

Description

Price

35023500

6000 PLUS AC Machine - R-134a

£1995.00

35020300

8500 PLUS AC Machine - R-134a

£2695.00

6000 ECO 1234 AC Machine - R-1234yf £2225.00

35020600

8500 1234 PLUS AC Machine - R-1234yf

£2995.00

35024900

- Note: Warranty updates include: 2 x pcs dryer filter, 2 x pcs vacuum pump oil (500ml) and 2 x database updates - Additional 2 Year Warranty also available - Ask for details - Training can also be provided on site for up to 6 people - Ask for details

Optional Accessories:

17

Part No.

Description

Price

35013000

Nitrogen Leak Test Kit

£140.00

35005300

Flushing Kit for R134a

£200.00

Part No.

Description

Price

35012900

Hybrid Pro Kit

£68.00

35019800

Flushing Kit for R1234yf

£280.00

BRAKING MADE IN THE UK

FLARE WITH THE BEST BRITAIN HAS TO OFFER

L SPECIAR! OFFE

FREE BRAKE PIPE WITH ANY FLARING TOOL!

FREE!

• Made in the UK • 90/10 Cupro Nickel • Diameter: 3/16” / 4.75mm • Wall Thickness: 0.028” / 0.71mm • Length: 25ft / 7.62m

PURCHASE ANY FLARING TOOL & RECEIVE A FREE ROLL OF SYKES-PICKAVANT BRANDED BRAKE PIPE!

No.1

Flaremaster 2 - The Original Hand Held Automotive Brake Pipe Flaring Tool Part No.

Size / Contents

4.75mm, 3/16” brake pipes 0272500P SAE & DIN single & double flares 4.75mm, 3/16” & 6mm brake pipes SAE & DIN single & double flares 4.75mm, 3/16” brake pipes 0272950P SAE & DIN single & double flares Plus Plier / Tube Cutter / Deburring Tool 4.75mm, 3/16” & 6mm Brake Pipes 0272960P SAE & DIN single & double flares Plus Plier / Tube Cutter / Deburring Tool

0272560P

VICE ED MOUNT MADE IN THE UK

Save

Offer

CAPABLE OF FLARING STEEL BRAKE PIPES

£157.50

£28.00

£129.50

THE BEST TOOL & THE BEST PIPE

£187.50

£32.00

£155.50

£197.50

£34.00

£163.50

£227.50

£38.00

£189.50

Brake Pipe Flaring Kits - 270 Series

INDUSTRY LEADING FLARING TOOL FOR OVER 30 YEARS

Brake flaring tool that produces both Convex and Double Lap flares to SAE & DIN standards • Metric & imperial pipe sizes • Unique ‘Dial-a-Size’ Turret design

• Automatic punch extraction from flare

• From 3/16” to 1/2” / From 4.75mm to 12mm • Lever cam operation for quick flaring • Screw clamp for accurate die alignment

Part No.

List Price

Save

Offer

£185.00

£31.00

£154.00

£239.00

£40.00

£199.00

£310.00

£55.00

£255.00

£215.00

£36.00

£179.00

Suitable for brake pipe sizes

SAE Single & Double Flares: 3/16”, 4.75, 6, 8, 10mm

0270020P DIN Single Flares: 4.75mm

SAE Single & Double Flares:

0270080P 3/16, 1/4, 5/16, 3/8, 1/2”, 4.75, 6, 8, 10, 12mm DIN Single Flares: 4.75mm

SAE Single & Double Flares: 3/16, 1/4” 4.75, 6mm

0270090P DIN Single Flares: 4.75mm

12v Automatic Brake Bleeder

ON CAR

HAND HELD BRAKE PIPE FLARING TOOL

List Price

0270010P SAE Single & Double Flares: 3/16” & 4.75mm

343001V2

MADE IN THE UK

£649.00

• One man operation for brake & clutch bleeding • 0 to 6 bar • ABS compatible • Reverse polarity warning • Pump c/w auto shut off valve • 5L reservoir / 4m cable • Auto power OFF when min level reached • Includes aluminium SP Euro cap - angled screw type

34400500

34303000 Brake Bleeder Cap Starter Set

240v Electric Brake Bleeder • One man operation for brake & clutch bleeding • 0 to 6 bar • ABS compatible • Impact resistant housing • Long supply hose (3.2m) • Weight: 10kg • Includes aluminium SP Euro cap - angled screw type Additional range of caps also available

OFFER £475.00 SAVE £24.00

LIST PRICE £499.00

• For use with 343001V2 and 34400500 brake bleeders (left)

Suitable for: - New Ford Fiesta (34301000) - Nissan / Asian Bayonet Type (34301100) - Euro Cap Angled Screw Type OFFER £99.95 SAVE £20.00 (34301400)

LIST PRICE £119.95

18

Tel: 01543 679900 www.sykes-pickavant.com

WORKSHOP EQUIPMENT

LOOKING FOR MORE PROFIT?....LOOK NO FURTHER! 53403500

Fortron Injector Max Machine BESTSELLER

THE BEST PROFIT GENERATOR A WORKSHOP CAN HAVE! ES:

INCLUD

Access to the Fortron-Zone forum Share and gain knowledge

Leaflet Dispenser & Injector Max leaflets

Comprehensive adaptor set

Listing on the Injector Max Garage Directory As featured on our website

Also Available 31487900 Inline ‘T’ Connector

NEW

• Designed to connect or ‘T’ in between the vehicles own fuel delivery lines and allows the ‘red’ fluid output hose to connect, so that RTG additive can be administered into tricky engines where regular connection does not allow an engine to run

£1995.00 Fluid Accessories Part No.

Description

Price

53403600

Petrol System Cleaning Fluid

£18.49

53403700

Diesel System Cleaning Fluid

£18.49

53403800

Vactek Fluid Bottle

£11.99

53403900

Induction Service Kit - Petrol (Aerosol)

£11.99

53404000

Induction Service Kit - Diesel (Aeresol)

£17.49

53404300

Induction Service Kit - Petrol (Pouring Fluid)

£17.49

53404100 Diesel Particulate Filter Cleaner REGEN - For cleaning the DPF

36610100 36610300 36610500 36601000 36611000

AdBlue Transport Tank - 68L Manual Pump AdBlue Transport Tank - 68L Manual Pump AdBlue Transport Tank - 68L 12v DC Pump AdBlue Digital Hose End Meter AdBlue Transport Tank - 110L 12v DC Pump

Type

Empty Hose Tank Weight

Plastic manual rotary pump 4m with plastic manual nozzle EPDM Plastic manual rotary pump 4m with stainless steel spout & plug PVC 12v DC pump - 30L/Min 4m with plastic manual nozzle EPDM Suitable for use with above models 12v DC pump - 30L/Min 3m with “Piusi” digital nozzle EPDM

Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: sales@sykes-pickavant.com www.sykes-pickavant.com ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE PRICES VALID UNTIL 31ST DECEMBER 2016 - REF: SPQ416GBP COPYRIGHT 2016 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED.

NEW

£24.95

AVAILABLE IN TWO TANK SIZES • For transportation and refuelling of AdBlue equipped vehicles 68L & 110L • Ideal for car, van, light commercial, agricultural, construction and heavy commercial workshops

• Impact resistant polyethylene tank, UV stabilised and equipped with wheels suitable for easy transportation • Available in two tank sizes - 68L for small workshops & 110L for large workshops • Horizontal filling operation • Vented filling plug Description

NO NEED TO REMOVE DPF SENSOR!

• For use with Injector Max machine - Simple and rapid process eliminating the need to remove or replace filters • Formulated to kick-start the forced regeneration of the DPF, clearing soot deposits and cleaning without disassembly • Suitable for all types of diesel including bio-diesel • Benefits include better fuel economy, reduces soot and exhaust gas emissions and helps maintain engine performance

New Range of AdBlue Transportation Tanks

Part No.

£24.95

NEW

Price

11kg

£399.00

10kg

£349.00

16kg

£595.00

-

£199.00

12kg

£1055.00 Distributor Stamp: