Tamiya 2015 mini4wd catalog

Page 1


1


2


3


When a modeling knife is used, extra care should be taken to avoid personal injury.

4


5


Mini 4WD Grade-Up Parts Catalog ・・・ Motor ・・・ Tires/Wheels ・・・ For Settings ・・・ Basic Modifications Mini 4WD PRO Lightweight Center Chassis (15374)

・・・Batteries/Chargers ・・・Accessories/Cases ・・・Decoration Parts ・・・Tools Bumperless N-03/T-03 Units (15382)

MS Chassis Modification Example (Balanced Type)

Large Dia. Stabilizer Head Set (11mm, 15mm) (15391) FRP Side Extension Roller Mount (15357) Lg Dia. Wheel w/Lock Nut PRO MS

Underside Stabilizing Head Set and rear rollers help keep stability in corners.

15232- Compatible FRP Multi Roller Setting Stay FRP Wide Rear Plate 15452for AR Chassis Mass Damper Set

(15394) (15392) Underside Stabilizing Head Set (15361)

Reinforced N-02/T-01 Units (15367)

Front

Light-Dash Motor PRO 15351 (15402) Atomic-Tuned PRO 8T Pinion GearMotor Set (15289)

Xxxxxxxxxxxxxxxxxxxx Xxxxxxxxxx Set (15440)

17mm Alum Rollers 15449 w/Plastic Rings

15453 Carbon Reinforced Pinion

Reinforced Gear Cover (for MS Chassis) (15363)

15287 N-02/T-01 Units (15367) Reinforced RC Hex-Hole Ball Hex Bearing Hole Ball 4pcs Bearing Set (4pcs.) (15287)

13mm Dia. 15360- Gold Plated Terminal Set MS ChassisGuide Roller

Ball Bearings (15180)

10% lighter than the standard kit part, this chassis also features a cooling duct and rotating switch lever.

60mm Reinforced Shafts (Black, 4pcs.) (15416)

4WDPlate Screw Set A (15232) Reinforcing 15431- FRPMini Gold PlatedSet Short Terminal Set (for MS Chassis) (15360)

Use these units in conjunction with FRP plates to enable a wide range of roller settings.

72mm Hollow Stainless Steel Shafts (15297)

72mm Reinforced Shafts (Black, 4pcs.) (15417)

※For Super X, XX chassis

15428 Mass Damper Square 8x8x32mm

Mass Damper Set (Heavy) (15401) Multi-Brake Set (for MS Chassis) (15399) These black nickel-plated shafts, featuring extra strength and durability, are designed for high-speed driving.

Mini Round Hole Ball Bearing Set (4pcs.) (15111)

Extremely strong and yet lightweight, these shafts are 40% lighter than standard parts.

Hex Hole Ball Bearing Set (4pcs.) (15287)

These ball bearings reduce friction loss and increase the top speed of your machine.

Attach these friction-resistant bearings for lossless power transfer to the tires and longer endurance.

DR 9mm Ball Bearings (15344)

DR 11mm Ball Bearings (15345)

You can widen the scope of machine settings by changing the sizes of the front/rear roller bearings with this set.

These 11mm ball bearings are essential for the guide roller setup on any Mini 4WD machine.

19mm Aluminum Ball-Race Rollers (15160)

Attach these durable lightweight aluminum rollers with internal ball bearings for smooth rotation.

Double Aluminum Rollers (13-12mm) (15398)

Xxxxxxxxxxxxxxxxxxxx Xxxxxxxxxx Set (15418)

Long Stabilizing Pole & Low Friction Plastic Roller Set (13mm) (15408)

13mm rollers with long stabilizing poles will help keep your machine stable during cornering.

Rear Double Roller Stay (for MS Chassis) (15362)

15440-

Double AluminumTire Rollers 15398- Low-Height & Wheel 13-12mm

Plate 9mm 15451 FRP Wide FrontDR for AR Chassis

Hollow Propeller Shaft (for Super X Chassis) (15234)

These precision-made steel bearings are fluorine-coated to ensure low-friction, smooth operation.

Lightweight stainless steel shaft comes with plastic gears and can improve acceleration and top speed.

Made from lightweight and strong stainless steel, this shaft will smoothly transfer power to all 4 wheels.

Xxxxxxxxxxxxxxxxxxxx Xxxxxxxxxx Set (15437)

17mm Aluminum Ball-Race Rollers (15161)

19mm Aluminum Roller w/Plastic Ring (15251)

Xxxxxxxxxxxxxxxxxxxx Xxxxxxxxxx Set (15449)

Strong and lightweight aluminum spokes fitted with large diameter plastic rings for high speed performance.

Stabilizing Pole Set (15059)

Double Aluminum Rollers (9-8mm) (15403)

Stabilizing poles with plastic balls will help prevent your machine from rolling over during cornering.

Short Stabilizing Pole & Roller Set (15158)

These rollers have rubber rings for smooth cornering and the poles help support the car in turns.

Front Sliding Damper Roller (15139)

Roller angle changes when contact is made with the track walls. 16mm rollers with rubber rings included.

This upper/lower roller setup can withstand the centrifugal forces during turns for smoother cornering.

Set includes 16mm and 19mm rollers (4 each) which are made from low-friction plastic material.

Xxxxxxxxxxxxxxxxxxx xxxxxxxxxxx (15426)

Aluminum Progressive Down-Thrust Rollers (15176)

Xxxxxxxxxxxxxxxxxxxx Xxxxxxxxxx Set (15412)

Low Friction Roller Set (15381)

The lightweight, warp-resistant rollers have internal ball bearings for smooth rotation.

These ball bearings for rollers are light and strong and increase cornering speed and stability.

Stylish 5-spoke rollers equipped with ball bearings and rubber rings.

Ball Bearings (15344)

Underside Stabilizing Head Set (15361)

1.4mm Hollow Propeller Shaft (for Super 1/TZ Chassis) (15205)

19mm Aluminum Ball-Race Rollers (5-Spoke Type) (15404)

Set (Dish) (15359)

Low-Profile Offset Tread Tires (15397)

Fluorine Coated Steel Bearing (4pcs.) (15393)

13mm Dia. Guide Roller Ball Bearings (15180)

Super Speed Gear Set (for MS Chassis) (15349) Gear Bearing Set (for MS Chassis) (15347) Fluorine Coated Gear Shaft (Straight, 2pcs.) (15390) 60mm Hollow Stainless Shaft

Rear Double Roller Stay (for MS Chassis) (15362)

These black nickel-plated shafts, featuring extra strength and durability, are designed for high-speed driving.

Smaller than Item 15398, these double rollers also weigh only half as much. 520 bearings are included.

Featuring an upper and a lower roller, these durable double rollers will help keep your machine stable on the track.

15459- Side Mass Damper Set AR Chassis

15405 Front Under Guard

Rollers slide to absorb shocks from contact with the track walls, helping to keep your machine stable on the track.

Xxxxxxxxxxxxxxxxxxx xxxxxxxxxxx (15425)

Xxxxxxxxxxxxxxxxxxxx xxxxxxx Set (15435)

Xxxxxxxxxxxxxxxxxxxx Xxxxxxxxxx Set (15450)

Underside Stabilizing Head Set (15361)

Attach to underside of front/rear bumpers to improve stability and prevent car from flying off the track.

MINI 4WD TUNE-UP PARTS 6


Large Dia. Stabilizer Head Set (11mm, 15mm) (15391)

This set reduces your machine's body roll at corners, making it more stable. Can be used with 13mm-19mm rollers.

Front Under Guard (15405)

This guard reduces the chance of your machine bouncing up and over the course wall after a jump landing.

Xxxxxxxxxxxxxxxxxxx xxxxxxxxxxx (15427)

Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx.

Stainless Steel Screw Set D (40mm) (15407)

Set includes 2x40mm screws (3pcs.) plus aluminum collars of 1.5mm, 3mm, and 6mm lengths (4pcs. each).

FRP Plate for Super X Chassis (15242)

Xxxxxxxxxxxxxxxxxxxx Xxxxxxxxxx Set (00000)

Roller Angle Adjuster Plate Set (15373)

Wide Roller Stay Set (Damped) (15377)

Xxxxxxxxxxxxxxxxxxxx Xxxxxxxxxx Set (15441)

Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.

Use this set to fine-tune the down thrust angle between the FRP plate and the chassis.

Install to widen the positions of your 9mm, 13mm, or 19mm rollers for better cornering performance.

Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.

Stabilizer Ball Cap (Bright) (15386)

Mass Damper Set (15392)

Set includes blue, green, yellow, orange, and red-colored ball caps (4 each) and a tool for easy attachment.

Equipping mass dampers will help prevent your machine from bouncing upon landing from jumps.

Mass dampers help keep your machine on the course after jump landings and also aid with high-speed stability.

Mini 4WD Screw Set A (15232)

Mini 4WD Screw Set B (15233)

This screw set is perfect for setting up highmounted rollers or double stays with FRP plates on your Mini 4WD PRO machine.

Set includes 2mm diameter screws of 10mm, 2mm, and 15mm lengths (6pcs. each), plus 2mm nuts (4pcs.) and lock nuts (2pcs.).

Rubber Brake Set (15413)

Brake pads reduce your machine's speed when entering slope and lane change sections to keep your car on the track.

Set includes white, black, gun metal, silver, and gold-colored ball caps (4 each) and a tool for easy attachment.

Xxxxxxxxxxxxxxxxxxx xxxxxxxxxxx (15428)

Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx.

Mass Damper Set (Heavy) (15401)

Mini 4WD Hex Mount Set (10mm, 15mm) (15395)

Side Extension Roller Mount (15230)

Xxxxxxxxxxxxxxxxxxxx Xxxxxxxxxx Set (15451)

Xxxxxxxxxxxxxxxxxxxx Xxxxxxxxxx Set (15452)

This mount set allows you to equip your rollers in a higher position or to install the double FRP plates.

These aluminum mounts reduce the space between the rollers and the track wall for sharp cornering and high-speed stability.

Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.

Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.

This strong, lightweight stay made from FRP can withstand great forces with minimal warping.

FRP Mount Plate Set (15150)

Mini 4WD PRO FRP Support Plate Set (15372)

FRP Side Extension Roller Mount (15357)

FRP Multi Roller Setting Stay (15394)

Reinforcing plates for parts that come under lots of stress during races. The many holes make mounting screws a breeze.

Install these support plates onto Mini 4WD PRO machines to enhance chassis rigidity.

Attach plate to widen roller positions, enabling sharper cor nering and more stable

This FRP plate enables wide attachment positions of 9mm, 13mm, and 19mm bearing rollers.

Torque-Tuned Motor PRO (15346)

Rev-Tuned Motor PRO (15350)

Atomic-Tuned Motor PRO (15351)

Hyper-Dash Motor PRO (15375)

High torque motor reduces power l o s s a n d p ro v i d e s h i g h s p e e d running. Features brass pinion gears.

High revolution motor capable of impressive speed on straights. Features brass pinion gears.

High efficiency motor with good balance of speed and torque. Features brass pinion gears.

Perfect for the advanced-level racer, this Mini 4WD PRO motor can perform on both high-speed and technical circuits.

Plasma-Dash Motor (15186)

Atomic-Tuned Motor (15215)

Hyper-Dash 2 Motor (15256)

Ultra-Dash Motor (15307)

This motor features a long-lasting brush for efficient power transfer on any circuit.

High-performance motor offers outstanding top speed and acceleration to take on climbs and corners.

FRP Multi Reinforcing Plate (15193)

This bumper reinforcing plate can withstand great forces without warping and increase the effectiveness of the rollers.

91mm long and 7mm wide, these straight FRP plates allow for many screw settings.

Xxxxxxxxxxxxxxxxxxx xxxxxxxxxxx (15430)

Xxxxxxxxxxxxxxxxxxx xxxxxxxxxxx (15431)

Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx.

Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx.

Light-Dash Motor PRO (15402)

Stabilizer Ball Cap (Monochrome) (15385)

Xxxxxxxxxxxxxxxxxxx xxxxxxxxxxx (15433)

FRP Rear Roller Stay for Super X Chassis (15243)

★Cannot be used in Tamiya official races.

Designed for advanced-level racers, this motor offers a performance level between Hyper-Dash Motor PRO and Torque-Tuned Motor PRO.

Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx.

This motor features superb speed and torque plus enhanced heat dissipation. Brush maintenance is possible.

High-efficiency motor provides a good balance of speed and torque to handle any type of course.

Power-Dash Motor (15317)

Sprint-Dash Motor (15318)

Rev-Tuned Motor (15133)

Torque-Tuned Motor (15134)

Motor Cooling Shield (15340)

With a focus on torque, this motor is perfect for small, technical courses or circuits with elevation changes.

With a focus on top speed, this motor is designed for courses that have long straight-aways.

This high-revving motor offers superb top speed and is ideal for use on fast circuits.

High-torque motor offers excellent acceleration performance, making it the perfect choice for technical

Attach this to the motor for better cooling to prevent power loss and improve motor life.

Offset Tread Tires (Hard/White) (15396)

These lightweight offset tread tires allow you to modify your machine's tire tread to match the course layout.

7

Low-Profile Offset Tread Tires (15397)

These offset tread tires are compatible with low-profile wheels such as Item 15294, 15295, 15358, and 15359.

Narrow Reston Sponge Tires (Black) (15388)

These lightweight narrow tires are made from Reston sponge material and offer superb traction.

Reston Sponge Tires (Blue) (15117)

Set of 4 high-grip lightweight tires made from special Reston sponge material.

Large Dia. Soft Slick Tire Set (Clear) (15364)

Softer than the standard tires, this set will provide higher grip for faster acceleration.

Large Dia. Hard Slick Tire Set (White) (15365)

Special firm tires designed for running on technical courses with lots of corners.


8


Mini 4WD Grade-Up Parts Matching List

Super XX

VS

Super TZ-X

AR

MS

MA

Super X

Super XX

VS

Super TZ-X

AR

MS

MA

MA

Super TZ

MS

Super X

MA

AR

Super FM

MS

Super TZ-X

Super TZ

AR

VS

Super 2

Super TZ-X

Super XX

Super FM

VS

Super X

Super 1

Super XX

Super TZ

Super 2

Super X

Super FM

Type 5

Super TZ

Super 2

Super 1

Super FM

Super 1

Zero

Super 2

Type 5

Type 5

Super 1

Zero

Type 3

Type 5

Type 3

15059 15113 15129 15139 15150 15158 15160 15161 15176 15180 15193 15198 15230 15232 15233 15242 15243 15251 15258 15343 15344 15345 15357 15361 15362 15372 15373 15377 15381 15385 15386 15391 15392 15394 15395 15398 15399 15401 15403 15404 15405 15407 15408 15412 15413 15418 15425 15426 15427 15428 15430 15431 15435 15436 15437 15441 15449 15450 15451 15452 15454 15456 15457 15458 15459 15461 15464 15467 15369 15471

Zero

Set-Up Parts

Type 3

MA

MS

AR

Super TZ-X

VS

Super XX

Super X

Super TZ

Super FM

Super 2

Zero

Reston Sponge Tires (Blue) Narrow One-Way Wheel Set Narrow One-Way Wheel Set (Wide Tread) Small Dia. Plated Spoke Wheel Set (w/Reston Sponge Tires) Narrow One-Way Wheel Set for Super X Chassis Small Dia. Semi-Pneumatic Tires w/Wheels LH/Tire Wheel Set (Fin) LH Tire/Wheel Set (Dish) Lg Dia Soft Tire Set Clear PRO/RACER/SUPER/FULLY/AERO Lg Dia Hard Tire Set Clear PRO/RACER/SUPER/FULLY/AERO Lg Dia Carbon Wheel Set w/Soft Slick Tires Lg Dia Carbon Wheel Set w/Soft Slick Tires Offset Tread Tires Offset Tread Tires Soft Clear Offset Tread Tires Hard/White Lg Dia One-Way Wheels Offset Tread Tires Narrow Reston Sponge Tires Black Small Dia Offset Tread Tire (4pcs.) Offset Tread Tires 4pcs Low Profile Narrow Large Dia Wheels w/White Arched Tires Small Dia Carbon Wheels w/White Arched Tires Low Profile Tire/Wheel Set Super X/Super XX Chassis Low Profile Tire w/1-Way Wheel Set Lg Diameter 1-Way Wheel Set Super X/XX Chassis Lg Diameter Tire/Wheel Set Low Profile Lg Diameter Tire/Wheel Set Low Profile for Super X/XX

MINI 4WD TUNE-UP PARTS MINI 4WD TUNE-UP PARTS 9

Super 1

Type 3

Rev-Tuned Motor Torque-Tuned Motor Plasma-Dash Motor Atomic-Tuned Motor Hyper-Dash 2 Motor Ultra-Dash Motor Power-Dash Motor Sprint-Dash Motor Torque-Tuned Motor PRO Rev-Tuned Motor PRO Atomic-Tuned Motor PRO Hyper-Dash Motor PRO Light-Dash Motor PRO Mach-Dash Pro Light Dash Motor

Tire & Wheels 15117 15120 15213 15219 15238 15239 15358 15359 15364 15365 15366 15368 15376 15378 15379 15387 15388 15396 15397 15414 15415 15442 15443 15444 15445 15446

Type 5

Gold Plated Terminal B 0 Type Chassis Gold Term WE090 Mini Round Hole Ball Beating Set (4pcs.) Aluminum Motor Support 1.4 Hollow Propeller Shaft-Super 1/Z Chassis Hollow Propeller (Super X Chassis) High Speed Counter Gear Set Gold Plated Terminal Set (Super X Chassis) RC Hex-Hole Ball Bearing (4pcs.) RC 8T Pinion Gear Set Metal/Plastic RC Mini 72mm Shaft H. Stainless Steel Fluorine Coated Gear Shaft Straight (2pcs.) RO Gear Bearing Set MS Chassis MS Chassis Super Speed Gear PRO High Speed Gear Set MS Chassis/Gear Ratio 4:1 Gold Plated Terminal Set MS Chassis PRO Reinforced Gear Cover MS Chassis Lightweight Center Chassis (Mini 4WD PRO) Bumperless N-03/T-03 Units Mini 4WD F Grease Fluoropolymer Fluorine Coated Gear Shaft Straight (2pcs.) Steel Bearing 4pcs Fluorine Coated Gold Plated Terminal Set (for MS Chassis) 60mm Reinforced Shaft Black (4pcs.) 72mm Reinforced Shaft Black (4pcs.) Gold Plated Terminal Set Super-II Chassis High Speed EX Gear Set MS Chassis/Gear Ratio 3.7:1 Super Speed Gear Set Super X & Super-II Chassis HIgh Speed EX Counter Gear Ration 3.7:1 Reinforced Gears w/ Easy Locking Gear Cover 60mm Hollow Stainless Shaft Carbon Reinforced Pinion 8T PInion Gear (6pcs.) G13 & 8T Pinion Gear Set Carbon Reinforced Mini 4WD Oil Applicator

Motors 15133 15134 15186 15215 15256 15307 15317 15318 15346 15350 15351 15375 15402 15433 15455

Zero

15046 15090 15111 15149 15205 15234 15236 15237 15287 15289 15297 15340 15347 15349 15355 15360 15363 15374 15382 15383 15390 15393 15400 15416 15417 15421 15429 15432 15434 15438 15440 15453 15462 15465

Type 3

Hop-Up-Options

Stabilizing Pole Set Rear Brake & Roller Set Sliding Damper Grease Set Front Sliding Damper Roller FRP Mount Plate Set Short Stabilizing Pole & Roller Set 19mm Aluminum Ball-Race Rollers (Aero-Spoke Type) 17mm Aluminum Ball-Race Rollers (3-Spoke Type) Aluminum Progressive Down-Thrust Rollers 13mm Dia. Guide Roller Ball Bearings FRP Multi Reinforcing Plate Rear Sliding Damper Brake Set Side Extension Roller Mount Mini 4WD Screw Set A Mini 4WD Screw Set B FRP Plate for Super X Chassis FRP Rear Roller Stay for Super X Chassis 19mm Aluminum Roller w/Plastic Ring Steering System Set DR Multi Chassis Balance Weight DR 9mm Ball Bearings DR 11mm Ball Bearings FRP Side Extension Roller Mount Underside Stabilizing Head Set Rear Double Roller Stay (for MS Chassis) Mini 4WD PRO FRP Support Plate Set Roller Angle Adjuster Plate Set Wide Roller Stay Set (Damped) Low Friction Roller Set Stabilizer Ball Cap (Monochrome) Stabilizer Ball Cap (Bright) Large Dia. Stabilizer Head Set (11mm, 15mm) Mass Damper Set FRP Multi Roller Setting Stay Mini 4WD Hex Mount Set (10mm, 15mm) Double Aluminum Rollers (13-12mm) Multi-Brake Set (for MS Chassis) Mass Damper Set (Heavy) Double Aluminum Rollers (9-8mm) 19mm Aluminum Ball-Race Rollers (5-Spoke Type) Front Under Guard Stainless Steel Screw Set D (40mm) Long Stabilizing Pole & Low Friction Plastic Roller Set (13mm) Rein Rr Double Roller Stay Rubber Brake Set Double Aluminum Rollers w/Rubber Rings (13-12mm) FRP Rr Double Roller Stay w/19mm Low Friction Rollers 19mm Aluminum Rollers w/Plastic Rings (Dish Type) Mass Damper Square 6x6x32mm Mass Damper Square 8x8x32mm Multi Roller Setting Stay FRP Rear FRP Reinforcing Plate Set Short Mini 4WD Basic Tune Up Set LG Dia Stabilizer Head Set 17mm Alum Ball Race Rollers 13mm Ringless Brake Sponge Set 3 Types 17mm Alum Rollers w/Plastic Rings AR Chassis Basic Tune Set FRP Wide Front Plate For AR Chassis FRP Wide Rear Plate For AR Chassis 2mm Cap Screw Set 25mm, 30mm Setting Gear Set AR Chassis Plastic Double Rollers Low Friction Red/Blue 13-12mm Rear Brake Set AR Chassis Side Mass Damper Set AR Chassis 19mm Alum Rollers (5 Spokes) w/Plastic Rings HG Alum Ball-Race Rollers 19mm (Ringless) Wide Rear Sliding Damper Wide Front Sliding Damper HG Sliding Damper Grease Extra Hard/Extra Soft

Dress-Up Parts, Body Sets 15356 Body Mount Adapter & Catch Set (for MS Chassis)

15369 Avante Mk.II Clear Body Set

15384 Bumperless N03/T03 Units w/LED Unit Red 15406 Quick Release Body Catch

15447 Clear Body Set Tridagger XX 15465 Mint 4WD Oil Applicator 15466 Body Set Aero Avante Clear

15468 Mini 4WD Maintenance Mat 180x290mm

How to use chart:

Part can be used as is.

▲ Part modification necessary when attaching such as scrapping, making a hole. Some parts in package may not be able to be used.

Please read the instruction manual carefully before attaching Grade Up Parts. Races organized by Tamiya, Inc. have official race rules. Parts attaching method or combination of the parts may prohibit the entry. Grade Up Parts attaching method of combination of the parts may reduce the performance of the car. Specification and prices of products may change without a notice.




Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.