Volume1 2010 RC_2010v1_E_H1_H4 EDT2.indd 2
10/01/15 14:42
Instant driving excitement right out of the box!
XB Super Levant ITEM 57796 L: 430mm
4WD
XB BMW M3 Sport Evo Drift Spec ITEM 57800 TT-01D TYPE-E w/LED Lights L: 448mm
4WD
XB ABARTH 500 ASSETTO CORSE ITEM 57798 M-05 L: 365mm
2WD
XB Nissan GT-R Drift Spec ITEM 57801 TT-01D TYPE-E w/LED Lights L: 444mm
4WD
XB Mitsubishi Racing Lancer ITEM 57797 w/LED Lights L: 442mm
4WD
XB Hotshot ITEM 57785 L: 390mm
4WD
XB The Frog ITEM 57756 L: 410mm
2WD
XB The Grasshopper ITEM 57746 L: 389mm
2WD
XB The Hornet ITEM 57741 L: 400mm
2WD
XB Wild Will Willy 2 ITEM 57743 WR-02 L: 325mm
2WD
XB Lunch Box ITEM 57749 L: 385mm
2WD
XB Midnight Pumpkin Metallic Special ITEM 57752 L: 385mm
2WD
12
RC_2010v1_E_01_38_0114EDT.indd 12
10/01/14 14:59
TRF801X ITEM 84067 L: 495mm
4WD
This 1/8 scale competition level R/C buggy assembly kit is designed and tested in the USA. Its tough yet lightweight chassis features a 3mm duralumin lower deck and carbon fiber upper deck/servo tray. Other aluminum parts such as shock towers, steering knuckles, and an engine mount designed for optimum weight distribution have also been incorporated to provide enhanced durability. The bevel diff-equipped front and rear gearboxes as well as the case to hold electronics are fully sealed to protect these important areas from dirt and debris. Large aluminum dampers offer superb shock absorption while full ball bearings reduce friction loss. Dual 32mm brakes provide the stopping power and a 125cc fuel tank is included to give the buggy excellent endurance.
TRF801XT ITEM 49497 L: 566mm
1/8
4WD
The 801Xt is a 1/8th scale competition level assembly Truggy kit, designed and tested in the USA. Its drive-line features optimized placement of the front and rear propeller shafts and is virtually straight, offering the highest efficiency in its class. The 801Xt chassis has plenty of adjustability to let it be fine tuned for the most demanding race tracks across the globe. The low profile polycarbonate body and wing are securely supported by the highly rigid anodized duralumin chassis which is equipped with a dependable shaft-driven 4WD system. A 4-wheel independent double wishbone suspension enables superb handling, while dual 32mm brakes and a turnbuckle brake linkage system provide the stopping power. Also on the already impressive chassis is a 3-piece centrifuge aluminum clutch, large aluminum dampers, adjustable turnbuckle linkages, carbon fiber upper deck and much more.
11
RC_2010v1_E_01_38_3EDT.indd 11
10/01/08 14:06
German Panzerkampfwagen IV Ausf.J Full Option Kit
Russian Heavy Tank KV-1 Full Option Kit ITEM 56028
L: 423mm
German Tank Destroyer Jagdpanther Late Version Full Option Kit ITEM 56024
L: 605mm
Leopard 2 A6 Main Battle Tank Full Option Kit ITEM 56020
German Panther Type G Full Option Kit L: 572mm
ITEM 56022
German Heavy Tank Type VI King Tiger“Production Turret�Full Option Kit L: 688mm
U.S. Medium Tank M26 Pershing (T26E3) Full Option Kit ITEM 56016
L: 445mm
ITEM 56026
L: 536mm
L: 640mm
ITEM 56018
M4 Sherman 105mm Howitzer Full Option Kit L: 376mm
ITEM 56014
Option Parts 53447 Battle System (for 1/16 R/C Tanks)
German Tiger I Early Production Full Option Kit ITEM 56010
Images show assembled and painted model kits.
RC_2010v1_E_01_38EDT.indd 10
L: 530mm
Install this Option Part and battle it out with other similarly equipped Tamiya 1/16 R/C tanks! Infrared light system is totally harmless and allows accurate battle judging. The Battle System has an indoor range of 30m and reproduces a wide range of sound effects and actions to simulate battle damage, including blast damage sound, engine trouble sound, speed reduction, limited operation state, and inoperable state.
10
10/01/05 9:24
1/16
RUSSIAN HEAVY TANK KV-2 ITEM 56030
L: 443mm
The Russian KV-2 heavy tank was developed to break up Finnish strongholds at the Mannerheim line during the Winter War in 1939. They were deployed in the summer of 1941 to counter the German invasion of Russia and were feared by German soldiers, who called it“Gigant (giant)”as a mark of respect. The dynamic form of the KV-2 with the giant rectangular turret has been accurately reproduced on this 1/16 scale R/C Tank. Many metal parts have been incorporated in the chassis to ensure high durability, and accessories such as the tow cables and tool boxes highlight its superb exterior details. In addition to forward/reverse running and left/right turning, the tank also features realistic light and sound effects which accompany various operations.
Main Gun The turret features full 360º rotation and the barrel of the 20 caliber 152mm gun offers 24º elevation and 4º depression. During firing, the barrel-mounted LED flashes, firing sound roars from the onboard speaker, and the turret recoil unit and drivetrain gearbox work in conjunction to produce realistic barrel and hull recoil movement. The front machine gun also features muzzle flash effect and firing sounds, while both the headlight and taillight are controllable as well.
9
RC_2010v1_E_01_38EDT.indd 9
10/01/05 9:24
BRITISH CHIEFTAIN TANK (w/4ch Control Unit) ITEM 30508 L: 424mm
The Chieftain tank first went into production in 1963 and it had an intimidating 55 caliber 120mm rifled main gun, which was built for the purpose of knocking out Soviet tanks from a range of 4000m. Its defensive abilities were also impressive with 150mm thick front armor plating. This 1/25 scale radio controlled British Chieftain MBT features a high level of detail and comes with pre-assembled belt-type tracks. The Chieftain can be easily operated via a 4-channel FM27MHz R/C system which features a directional pad to control forward/ reverse, sharp turning, and pivot turning, and another directional pad to control gun turret rotation and gun barrel elevation/depression.
Turret Gearbox
MC 04 Receiver/Control Unit
Right Gearbox
● 27MHz FM 4-channel transmitter included. ● One 006P (9V) and four LR6/AA/UM3
alkaline batteries separately required.
Battery
Frequency Crystal
Left Gearbox
In the summer of 1941, German soldiers were rudely shocked with the arrival of the T-34, which could take on all German tanks at the time. Later in 1944, an upgraded T-34-85 entered the fray with an improved 3-man turret design and a more powerful 85mm gun. Now military fans can take command of this awesome AFV with Tamiya's 1/35 scale R/C model. This kit includes compact, preassembled gearboxes which drive the tank and a separate pre-assembled gearbox which allows full control of turret rotation and gun elevation.
RUSSIAN MEDIUM TANK T-34-85 (w/4ch Control Unit) ITEM 48208 L: 238mm
German Panther Type G Late Version
German Panzerkampfwagen IV Ausf.J
（w/4ch Control Unit） ITEM 48205
Images show assembled and painted model kits.
RC_2010v1_E_01_38EDT.indd 8
U.S. Medium Tank M4A3 Sherman
（w/4ch Control Unit） L: 257mm
ITEM 48206
（w/4ch Control Unit） L: 200mm
ITEM 48207
L: 172mm
8
10/01/05 9:23
1/10
FORD BRONCO 1973 ITEM 58436 CR-01 L: 435mm
4WD
American 4WD vehicles produced prior to 1966 were viewed as large, crude machines, but the Ford Bronco which was released that year broke the mold with its compact design. The first generation“Early Broncos”were produced until 1977 and remain highly popular as offroad and rock-climbing vehicles even today. The subject of this R/C car is the 1973 model in the wagon body style. The tough ladder frame CR01 chassis features a 4-link rigid suspension which provides maximum stroke and ground clearance. The battery is positioned to keep the center of gravity low and the centrally-located motor effectively transmits power via propeller shafts to conquer difficult, rocky terrain.
JEEP WRANGLER（YJ） ITEM 58429 CR-01
MERCEDES-BENZ UNIMOG 406 SERIES U900
L: 435mm
ITEM 58414 CR-01
4WD
L: 435mm
7
RC_2010v1_E_01_38EDT.indd 7
TOYOTA LAND CRUISER 40 ITEM 58405 CR-01 L: 435mm 4WD
4WD
Images show assembled and painted model kits.
10/01/05 9:22
SAND SCORCHER (2010) ITEM 58452 L: 400mm
2WD
A highly popular model during the R/C “Buggy Boom”was the Sand Scorcher.
To celebrate the 30th anniversary of its release, Tamiya has given this famous buggy the special re-release treatment, incorporating modern improvements while keeping to the original mechanical layout of the chassis. The form of the plastic body features various design modifications but retains the nostalgic presence of the original. Armed with grooved front tires and ribbed rear tires, this buggy offers exciting R/C action both on-road and off-road.
BUGGY CHAMP (2009) 009))
ITEM 58441 L: 400mm
2WD
When it was first released in 1979, Tamiya's Buggy Champ created a new genre of R/C models and kicked off the worldwide“Buggy Boom”of the 1980s. While maintaining the basic layout of the original, this re-release version has been thoroughly updated with many new metal parts in order to meet modern
Images show assembled and painted model kits.
RC_2010v1_E_01_38EDT.indd 6
R/C model standards. Front and rear tires feature the same tread pattern as the original and you can paint the plastic body with your choice of Tamiya Plastic Spray Paint colors. Furthermore, it is compatible with the separately available compact Tamiya LF1100-6.6V (M-Size) battery (Item 55105).
6
10/01/05 9:22
1/10
Mercedes-Benz Unimog g 406 Series U900 ITEM 58457 CC-01 L: 407mm
4WD
The Mercedes-Benz Unimog is a multi-purpose truck with unrivalled off-road performance and its name is an acronym which stands for the German description“UNIversal-MOtor-Gerät.”Of all the variants released during the design's 50 year history, the 406 Series, with its curved hood and round headlights, has been a popular longseller since its debut in 1963. In addition to work vehicle variants such as snow plow, fire engine, road maintenance truck, and tow truck, it is also used in Europe for cross-country and rally racing events. This distinctive truck is now available as a realistic 1/10 scale radio control model on Tamiya's 4WD CC-01 chassis.
TOYOTA LAND CRUISER 40 ITEM 58445 CC-01 L: 365mm
4WD
Of the many iterations of the Toyota Land Cruiser, the 1972 Land Cruiser 40 is particularly popular thanks to its attractive styling and it has a large fan base around the world. This R/C model's body is made from ultra durable polycarbonate and the actual vehicle's front bumper and 35inch tires are accurately reproduced to provide a realistic scale appearance. 2 white and 2 red LEDs depict the head and tail lights respectively, further enhancing its presence. The tough CC01 chassis is equipped with a front independent double wishbone and rear 4-link rigid axle suspension setup, allowing you to enjoy exciting cross-country, off-road, and on-road R/C action.
5
RC_2010v1_E_01_38_0114EDT.indd 5
Images show assembled and painted model kits.
10/01/14 14:58
1/10
TOYOTA TUNDRA HIGH-LIFT Electric R/C assembly kit of the Toyota Tundra full-size pick-up made for North America. This is the Double Cab version of the 2nd generation Tundra, which debuted in 2007. The model features a realistic ladder frame chassis, assembly 3-speed transmission, and shaft-driven 4WD system. An abundance of metal parts such as frame components, leaf springs, and friction dampers are included for excellent durability. The superbly detailed resin body combines with monstersize tires for an impressive high-clearance look. Furthermore, roll bar, grille guard, roof carrier, and 2 snowboards are included as separate parts to dress up this truck. Separately available LED lights can also be installed for the ultimate in R/C realism.
TOYOTA HILUX HIGH-LIFT
FRONT GUARD
GEAR CHANGE MOTOR SERVO (NOT INCLUDED)
RC_2010v1_E_01_38EDT.indd 4
LADDER FRAME CONSISTS OF STEEL CHANNEL
L: 500mm
4WD
ALUMINUM FRICTION DAMPER
LEAF SPRING
ITEM 58397 L: 508mm
3-SPEED TRANSMISSION 94mm DIAMETER SEMI-PNEUMATIC LUG PATTERN TIRES
4WD
Electric R/C assembly kit of the 4x4 Toyota Hilux series 30 custom pickup, which was one of the most popular models during the 1980s and retains a large following today. The model features a realistic ladder frame chassis, assembly 3-speed transmission and shaft drive 4WD system. Muffler, windshield wipers, side steps, differential guard, under guard and surfboard are included as separate parts to dress up this truck. Separately available LED lights can also be installed for the ultimate in R/C realism.
Images show assembled and painted model kits.
STEERING SERVO (NOT INCLUDED)
ITEM 58415
QUICK BATTERY HOLDER
TAMIYA BATTERY PACK (NOT INCLUDED)
FORD F-350 HIGH-LIFT
ITEM 58372 L: 492mm
4WD
Electric R/C assembly kit of one of the most representative American pick-up trucks, the Ford F-350. The model features realistic ladder frame, 3-speed transmission and shaft drive 4WD system. Highly detailed injection molded body and large diameter wheels enhance the stylish high-ground-clearance look. Original marking stickers add to the truck's overall realism.
4
10/01/05 9:20
Scania R620 6X4 Highline ITEM 56323 Type RS-540 motor included.
Scania R470 Highline Metallic Special L: 520mm
ITEM 56321 Type RS-540 motor included.
Produced under license from SCANIA AB
Produced under license from SCANIA AB
Scania R470 Highline
Knight Hauler
ITEM 56318 Type RS-540 motor included.
L:: 452m L 452mm mm
ITEM 56314 Type RS-540 motor included.
L: 452mm
L: 630mm
Produced under license from SCANIA AB
Volvo FH12 Globetrotter 420 ITEM 56312
Ford Aeromax L: 440 440mm
Globe Liner ITEM 56304
3
RC_2010v1_E_01_38EDT.indd 3
ITEM M 56309
L: 614m 614mm m
King Hauler L: 500mm
ITEM 56301
L: 600mm
Images show assembled and painted model kits.
10/01/05 9:19
TRACTOR TRUCK OPTION PARTS 56512
56513
3-Axle Reefer Semi-Trailer for Tamiya R/C Tractor Truck ITEM 56319 L: 983mm
Twin-Spoke Front Aluminum Wheels (2pcs.)
Twin-Spoke Outside Rear Aluminum Wheels (2pcs.)
56302
56303
56306
56310
56511
Semi-Trailer for Tamiya R/C Tractor Truck
Tank-Trailer for Tamiya R/C Tractor Truck
Flatbed-Trailer for Tamiya R/C Tractor Truck
Pole-Trailer for Tamiya R/C Tractor Truck
Tractor Truck Multi-Function Control Unit
Images show assembled and painted model kits.
RC_2010v1_E_01_38_0115EDT.indd 2
2
10/01/16 8:58
1/14 Image shows separately availab available semi-trailer. Image shows prototype
MAN Enough For You? MAN TGX 26. 540 6x4 XLX ITEM 56325 L: 526mm
Manufactured under license from MAN
Trucks are the backbone of many logistics networks around the world. One such impressive truck which made its debut in 2007 and won the 2008 Truck of the Year award is the MAN TGX 26.540 6x4 XLX. Tamiya is proud to add this impressive piece of German technology to its 1/14 scale R/C Tractor Truck line-up. This 526mm long truck model features a 3-axle design, a detailed cabin interior, realistic chassis and suspension, and a controllable 3-speed gearbox. Also providing the model with greater scale realism are accurately reproduced exterior details including the exhaust cover, side mirrors, step plates, as well as metal plated wheels. The kit-included coupler enables linkage with any of Tamiya's currently available 1/14 scale trailers to allow you to realistically depict the MAN truck towing a heavy load.
1
RC_2010v1_E_01_38_0115EDT.indd 1
Image shows prototype
10/01/16 8:57
57741 57742 57743 57744 57746 57748 57749 57750 57751 57752 57754 57755 57756 57757 57758 57759 57761 57764 57765 57766 57767 57768 57769 57770 57771 57772 57773 57774 57775 57776 57777 57778 57779 57780 57781 57782 57784 57785 57786 57787 57788 57789 57790 57791 57792 57793 57794 57795 57796 57797 57798 57799 57800 57801
The Hornet Mini Cooper Wild Willy 2 MINI Cooper 2002 The Grasshopper Desert Gator Lunch Box ESSO Ultraflo Supra NISMO R34 GT-R Z-Tune Midnight Pumpkin Metallic Special Suzuki Swift Super 1600 Germany '05 Sand-Viper The Frog NISMO Coppermix Silvia Ferrari FXX Mobil 1 SC Open Interface Tom's SC430 BMW 320si WTCC 2006 Team Germany（TT-01） NISMO Coppermix Silvia（TT-01D）Drift Spec Mazda RX-7（TT-01D）Drift Spec Subaru Impreza WRC Monte Carlo '07（TT-01） Volkswagen Beetle（M-04L） Cayenne S Transsyberia 2007 BMW Z4 M Coupe Racing（TT-01） Eclipse Advan SC430（TT-01） Plasma Edge（DF-02） MINI Cooper S 2006（M-03L） Neo Falcon（DT-02） Nissan Fairlady Z Version NISMO（TT-01 Type-E） Porsche 911 GT3 Cup VIP 2007（TT-01） Suzuki SX4 WRC（TT-01 Type-E） Volkswagen Golf GTI Cup Car（TT-01 Type-E） Nissan GT-R（TT-01 Type-E） Lamborghini countach LP500S（TT-01 Type-E） Rising Fighter Mitsubishi Pajero Metaltop Wide Porsche 911 GT3 Team KTR（TT-01 Type-E） Hotshot Subaru Impreza WRC 2008（TT-01 Type-E） FIAT 500（M-03M） （TT-01 Type-E） XANAVI NISMO GT-R（R35） Levant ORC Amemiya SGC-7（TT-01 Type-E） Mercedes AMG DTM C Class 2008 Original Teile（TT-01 Type-E） LEXUS GS400（TT-01D Type-E）Drift Spec Mitsubishi Lancer Evolution X（TT-01 Type-E） Cusco Dunlop Subaru Impreza（TT-01 Type-E） Hatsune Miku Studie GLAD BMW Z4（TT-01 Type-E） Super Levant Team Repsol Mitsubishi Ralliart RACING LANCER Abarth 500 Assetto Corse（M-05） BMW M3 GT2 2009 (TT-01 Type-E) BMW M3 Sport Evo (TT-01D Type-E) Drift Spec Nissan GT-R (TT-01D Type-E) Drift Spec
1/10 SCALE R/C BOY'S 4WD RACER SERIES 57602 Voltec Fighter 57604 Thunder Blitz 57606 Wild Ceptor 1/10 SCALE R/C GLOW ENGINE CARS 44032 TG10R Chassis Kit 44040 Beams Integra 44042 TG10-Mk.2 Chassis Kit 1/8 SCALE R/C GLOW ENGINE CARS 44050 4x4 Racing Truck Nitrage 5.2 1/14 SCALE R/C TRACTOR TRUCKS 56301 King Hauler 56302 Semi-Trailer 56303 Tank Trailer 56304 Globe Liner 56305 Mercedes-Benz 1838LS 56306 Flatbed Semi-Trailer 56307 Mercedes-Benz 1850L 56309 Ford Aeromax 56310 Pole-Trailer 56312 Volvo FH12 Globetrotter 420 56314 Knight Hauler 56318 Scania R470 Highline 56319 3-Axle Reefer Semi-Trailer 56321 Scania R470 Highline Metallic Special 56323 Scania R620 6X4 Highline 56325 MAN TGX 26.540 6X4 XLX 1/16 SCALE R/C TANK SERIES 56010 Tiger I Early Production Full-Option Kit 56014 M4 Sherman 105mm Howitzer Full-Option Kit 56016 U.S. Medium Tank M26 Pershing（T26E3）Full-Option Kit 56018 German Heavy Tank Type VI King Tiger "Production Turret" Full-Option Kit 56020 Leopard 2 A6 Main Battle Tank Full-Option Kit
56022 56024 56026 56028 56030
German Panther Type G Full-Option Kit German Tank Destroyer Jagdpanther（Late Version）Full-Option Kit German Panzerkampfwagen IV Ausf.J Full-Option Kit Russian Heavy Tank KV-I Full-Option Kit Russian Heavy Tank KV-2 Gigant Full-Option Kit
1/35 SCALE R/C TANK SERIES 48205 German Panther Type G Late Version 48206 German Panzerkampfwagen IV Ausf.J 48207 U.S. Medium Tank M4A3 Sherman 48208 Russian Medium Tank T-34-85 R/C AVIATION SERIES 56402 Peak Spirit RU（With R/C Unit） 56403 Alt Stream 1/8 & 1/10 SCALE FACTORY ASSEMBLED GLOW ENGINE R/C CAR SERIES 43514 Nitro Thunder 43524 Raybrig NSX 2005（TNS） 43525 Nitro Crusher 43526 Audi A4 DTM 2005（TNS） 43527 ESSO Ultraflo Supra（TNS）● 43529 Mad Spirit（TNS-B） 43530 TNX 5.2R 43532 Nitrage 5.2 43533 Subaru Impreza WRC Monte Carlo '07（TNS-FD） 43535 Mighty Ballista（TNS-B15） TamTech-Gear SERIES 56701 The Frog 56702 The Hornet 56703 The Fox-Mini 56705 Desert Gator 56706 Porsche Turbo RSR Type 934 56708 Porsche Turbo RSR Type 934 Jägermeister 56709 Porsche 935“Martini” 56710 Ferrari GTO 56712 Lamborghini countach LP500S TamTech-Gear ASSEMBLY KIT SERIES 57101 Porsche Turbo RSR Type 934 57102 GB-01 Chassis Kit 57103 Ferrari GTO 57104 Porsche 935“Martini” 57105 Lamborghini countach LP500S TAMIYA R/C SYSTEMS 45015 C.P.R. Unit P-160F 45026 Expec GT-I 2-Channel Radio Control System 45027 Expec GT-II 2-Channel Radio Control System 45028 Electronic Speed Controller TEU-302BK 45030 Expec SP Radio Control System w/ESC 45031 High Performance ESC Volac MS 45033 TamTech-Gear Electronic Speed Controller TEU-102BK 45034 TSU-02 Servo for TamTech-Gear 45037 Electronic Speed Controller TEU-103BK for Twin Motor 45038 Brushless ESC 01 45039 Brushless Motor 01 12T & Brushless ESC 01 Set 45041 Electronic Speed Controller TEU-104BK 45042 TamTech-Gear Brushless ESC 45043 TamTech-Gear Brushless Motor & Brushless ESC Set 55100 Power Champ RC（8pcs.） BATTERIES AND QUICK CHARGERS 55058 7.2V Auto Discharger 55085 Ni-Cd Battery 7.2V-1300mAh Custom Pack 55086 Ni-Cd Battery 7.2V-2400mAh Racing Pack RC2400SP Zapped 55090 TamTech-Gear 7.2V500mAh Battery 55092 TamTech-Gear Ni-MH 7.2V 1200mAh Battery 55094 Ni-MH Battery 7.2V-3700mAh Advanced Pack 3700HV 55095 Ni-Cd Battery 7.2V Racing Pack 1600SP 55097 7.2V Battery Auto Discharger 2 55102 LF Battery LF2200-6.6V Racing Pack 55103 LF-6.6V Battery DC Charger 55105 LF Battery LF1100-6.6V Racing Pack (M-Size) ● Note that this product is unavailable in some areas. ● Este producto no esta disponible es algunos paises. ● Bitte beachten, dass dieses Produkt in einigen Regionen nicht erhältlich ist. ● Ce produit n'est pas disponible dans certains pays.
Manufacturer and vehicle names/brands which are featured in some products listed in this catalog include trademarks, copyrights, and/or other intellectual properties belonging to their respective owners. They are used with permission and/or under license by Tamiya, Inc. Produced under license of Ferrari Spa. FERRARI, the PRANCING HORSE device, all associated logos and distinctive designs are trademarks of Ferrari Spa. The body designs of the Ferrari cars are protected as Ferrari property under design, trademark and trade dress regulations The trademarks, copyrights and design rights in and associated with the following Lamborghini vehicles Countach, Miura, Gallardo are used under license from Lamborghini ArtiMarca S.p.A., Italy and the design of the enclosed product are subject to intellectual property protection owned by Daimler AG. They Mercedes-Benz, are used by Tamiya, Inc. under license. Honda Official Licensed Product Licensed by Suzuki
38
RC_2010v1_E_01_38_0115EDT.indd 38
10/01/15 11:47
TAMIYA R/C MODEL LINE-UP 1/10 & 1/12 SCALE RADIO CONTROL CARS 58161 Ford F-150 58204 Blazing Star 58242 Wild Willy 2 58273 Subaru Impreza WRC 2001 58280 TXT-1 58285 Calsonic Skyline GT-R 2001 58295 Mini Cooper 58298 Enzo Ferrari（TB-01） 58300 Abt-Audi TT-R（TA04-SS） 58302 Enzo Ferrari（TT-01） 58307 Alfa Romeo Giulia Sprint GTA（M-04M） 58309 Twin Detonator 58312 Blackfoot-Xtreme 58321 Super Clod Buster 58325 Eunos Roadster（M-04M） 58328 Gravel Hound 58330 Xanavi NISMO Z（TT-01） 58334 Rising Storm 58336 The Hornet 58340 Super Fighter G 58343 Ferrari F430（TT-01）Finished Body 58344 Desert Gator 58346 The Grasshopper 58347 Lunch Box 58349 Subaru Impreza WRC Monte Carlo '05（TT-01D）Drift Spec 58351 Mercedes-Benz C11（Finished Body） 58354 The Frog（2005） 58355 Audi A4 DTM 2005（TT-01）Finished Body 58359 ESSO Ultraflo Supra（TT-01）Finished Body ● 58364 NISMO R34 GT-R Z-Tune（TT-01） 58365 Midnight Pumpkin Metallic Special 58368 Suzuki Swift Super 1600（M-03M） 58370 Dark Impact（DF-03） 58371 TB Evolution 5 Chassis Kit 58372 Ford F-350 High-Lift 58373 NISMO Coppermix Silvia（TT-01） 58374 Sand-Viper（DT-02） 58375 Mobil 1 SC（TA05） 58377 Ferrari FXX（TT-01） 58378 Ferrari FXX（TA05） 58379 Vodafone AMG-Mercedes DTM 2006（TT-01）Finished Body 58380 Keen Hawk（DF-03） 58382 Mazda RX-7（TT-01） 58383 Volkswagen Beetle（M-04L） 58384 Subaru Brat 58385 BMW 320si WTCC 2006 Team Germany（TT-01） 58386 NISMO Coppermix Silvia（TT-01D）Drift Spec 58387 Avante Mk.II（DF-03） 58388 Mazda RX-7（TT-01D）Drift Spec 58390 Impreza WRC Monte Carlo '07（TT-01） 58391 Hotshot（2007） 58392 Toyota Supra（TT-01D）Drift Spec 58393 BMW Z4 M Coupe Racing（TT-01） 58394 Eclipse Advan SC430（TA05-IFS） 58395 DB01 Durga（DB01） 58396 Dualhunter 58397 Toyota Hilux High-Lift 58399 Plasma Edge（DF-02） 58400 MINI Cooper S 2006（M-03L） 58401 Neo Falcon（DT-02） 58402 Nissan Fairlady Z Version NISMO（TT-01 Type-E） 58403 Fire Dragon（2008） 58404 DB01 Baldre（DB01） 58405 Toyota Land Cruiser 40（CR-01） 58406 Cayenne S Transsyberia 2007 58407 Porsche 911 GT3 Cup VIP 2007（TT-01 Type-E） 58408 Suzuki SX4 WRC（TT-01 Type-E） 58409 ARTA Garaiya（TB-03） 58410 Volkswagen Golf GTI Cup Car（TT-01 Type-E） 58411 Nissan GT-R（TT-01 Type-E） （TB-03） 58412 Xanavi NISMO GT-R（R35） 58413 Lamborghini countach LP500S（TT-01 Type-E） 58414 Mercedes-Benz Unimog 406 Series U900（CR-01） 58415 Toyota Tundra High-Lift 58416 Rising Fighter 58417 Subaru Impreza WRC Monte Carlo '07（DF-03Ra） 58418 The Boomerang（2008） 58419 NISMO R34 GT-R Z-tune（TT-01D）Drift Spec 58420 TB-03D Drift Spec Chassis Kit 58422 Porsche 911 GT3 Team KTR（TT-01 Type-E） 58423 Super Clod Buster Chrome Edition 58424 TAKATA Dome NSX（TB-03） 58425 ORC Amemiya SGC-7（TB-03） 58426 Subaru Impreza WRC 2008（TT-01 Type-E） 58427 FIAT 500（M-03M） （TT-01D）Drift Spec 58428 Nissan Skyline GT-R（R32） 58429 Jeep Wrangler（CR-01） 58430 Subaru Impreza WRC 2008（DF-03Ra） 58431 F104 PRO (w/Body) 58432 Lexus GS400（TT-01D）Drift Spec 58433 Mercedes AMG DTM -C Class 2008- Original Teile（TT-01 Type E）
58434 58435 58436 58437 58438 58439 58440 58441 58442 58443 58444 58445 58446 58447 58448 58449 58450 58451 58452 58453 58454 58455 58456 58457
（TB-03） Calsonic IMPUL GT-R（R35） Cusco Dunlop Subaru Impreza（TA05 Ver.II） Ford Bronco 1973 (CR-01) Mitsubishi Lancer Evolution X（TT-01 Type E） MINI Cooper Racing (M-05) Cusco Dunlop Subaru Impreza（TT-01 Type E） Mitsubishi Lancer Evolution X（DF-03Ra） Buggy Champ (2009) Hatsune Miku Studie GLAD BMW Z4（TT-01 Type E） M-05 PRO Chassis Kit Abarth 500 Assetto Corse (M-05) Toyota Land Cruiser 40 (CC-01) Lancia Delta Integrale（DF-03Ra） Ferrari F60 (F104) Corolla Axio apr GT（TA05 ver.II） BMW M3 GT2 2009（TT-01 Type-E） TT-01R Type-E Chassis Kit BMW M3 Sport Evo (TT-01D Type-E) Drift Spec Sand Scorcher (2010) Alfa Romeo MiTo (M-05) Honda S800 Racing (M-05) Nissan GT-R (TT-01D Type-E) Drift Spec Lamborghini Gallardo LP560-4 Super Trofeo (TA05 ver.II) Mercedes-Benz Unimog 406 Series U900 (CC-01)
TRF SERIES 42101 RC Pit Bag（Large） 42102 TRF Special Damper（Hard Black Coating）4pcs. 42103 TA05MS Chassis Kit 42104 TRF415 MSXX Marc Rheinard Edition 2007 42105 TRF501X World Edition 42106 TRF416 Chassis Kit 42107 TB Evolution 5 MS Chassis Kit 42108 630 Ball Bearing (Fluorine Sealed) 2pcs. 42109 840 Ball Bearing (Fluorine Sealed) 2pcs. 42110 840 Flanged Ball Bearing (Fluorine Sealed) 2pcs. 42111 850 Ball Bearing (Fluorine Sealed) 2pcs. 42112 950 Ball Bearing (Fluorine Sealed) 2pcs. 42113 1050 Ball Bearing (Fluorine Sealed) 2pcs. 42114 1150 Ball Bearing (Fluorine Sealed) 2pcs. 42115 1510 Ball Bearing (Fluorine Sealed) 2pcs. 42116 3x10mm Blue Titanium Turnbuckle Shaft（2pcs.） 42117 3x23mm Blue Titanium Turnbuckle Shaft（2pcs.） 42118 3x32mm Blue Titanium Turnbuckle Shaft（2pcs.） 42119 3x38mm Blue Titanium Turnbuckle Shaft（2pcs.） 42120 3x42mm Blue Titanium Turnbuckle Shaft（2pcs.） 42121 3x45mm Blue Titanium Turnbuckle Shaft（2pcs.） 42122 Wrench for Blue Titanium Turnbuckle Shaft 42123 High Performance ESC Volac MS C3 42124 High Performance Motor Transpeed Brushless 3.5T 42128 VG Joint & Cup Grease 42129 VG Damper Grease 42130 VG Thrust Bearing Grease 42131 HL Cylinder For TRF Special Dampers（2pcs.） 42132 HL Cylinder For Aeration Dampers（Front, 2pcs.） 42133 HL Cylinder For Aeration Dampers（Rear, 2pcs.） 42134 HL Cylinder For M-Chassis Aluminum Dampers（2pcs.） 42135 VG Fast Charger For Ni-MH/Ni-Cd Battery 42137 Competition O-Rings For Oil Dampers 42139 TRF511 Chassis Kit 42140 VG Motor Checker 42141 VG Tire Warmer 42142 3mm Ceramic Diff Ball（12pcs.） 42143 4mm Aluminum Serrated Wheel Nut（4pcs./Blue） 42144 High Performnace ESC Volac Brushless BL2 42145 Hex Wrench Screwdriver (1.5mm) 42146 Hex Wrench Screwdriver (2mm) 42147 Hex Wrench Screwdriver (2.5mm) 42148 Box Wrench (5.5mm) 42149 Box Wrench (7mm) 42150 Ballpoint Hex Wrench Screwdriver (2.5mm) 42151 Hex Wrench Screwdriver Bit (1.5mm) 42152 Hex Wrench Screwdriver Bit (2mm) 42153 High Performance ESC Volac Crawler 42154 High Performance Motor Transpeed Brushless (Racing Stock 21.5T) 42155 High Performance Motor Transpeed Brushless 6.5T (12mm Dia. Rotor) 42156 High Performance Motor Transpeed Brushless 7.5T (12mm Dia. Rotor) 42157 High Performance Motor Transpeed Brushless 8.5T (12mm Dia. Rotor) 42158 High Performance Motor Transpeed Brushless 9.5T (12mm Dia. Rotor) 42159 (+) Screwdriver M 42160 (+) Screwdriver L 45161 (-) Screwdriver M 42162 TRF416X Chassis Kit 42163 TRF511 Rectangular Battery Holder 42165 TRF Damper Pistons (Blank/4pcs.) 42166 Aeration Damper Pistons (Blank/4pcs.) 1/10 SCALE XB SERIES 57723 Gravel Hound 57731 Rising Storm 57736 MINI Cooper '94 Monte-Carlo 57740 Mercedes-Benz C-Class DTM 2004
37
RC_2010v1_E_01_38_0114EDT.indd 37
10/01/14 15:12
DF-03Ra CHASSIS OPTION PARTS
Basic Upgrade Parts
Tires & Suspension Parts
Transmission Parts
53924
53949
42102
54189
54190
DF-03 Heat Sink Bar Set
DF-03 Lightweight Battery Stopper Pin
TRF Special Damper (Hard Black Coating) 4pcs.
DF-03Ra Carbon Front Damper Stay Set
DF-03Ra Carbon Rear Damper Stay Set
53953
53931
53941
53948
53792
DF-03 Front One-Way Set
DF-03 Center One-Way Set
DF-03 Aluminum Turnbuckle Steering Rod
DF-03 Aluminum One-Piece Propeller Cup Joint
53925
Assembly Universal Shaft （TT-01, TA04）
53923
DF-03 Slipper Clutch Set
05 Module e Pinion Gear （27T, 29T）
53924
DF-03 Heat Sink Bar Set
53949
DF-03 Lightweight Battery Stopper Pin
54121
Aluminum Horn for Hi-Torque Servo Saver
42102
TRF Special Damper (Hard Black Coating) 4pcs..
53953
DF-03 Front One-Way Set
53931
DF-03 Center One-Way Set
53941
DF-03 Aluminum Turnbuckle Steering Rod
53948
DF-03 Aluminum One-Piece Propeller Cup Joint nt
53792
Assembly Universal Shaft（TT-01, TA04）
53925
DF-03 Slipper Clutch Set
53930
Super Stock Motor Type-BZ（23T）
53923
05 Module Pinion Gear（27T, 29T）
OPTION PARTS USAGE EXAMPLE
Subaru Impreza WRC '08 ITEM 58430 DF-03Ra
Subaru Impreza WRC Monte Carlo '07 L: 434mm
4WD
ITEM 58417 DF-03Ra
L: 446mm
4WD
36
RC_2010v1_E_01_38_2EDT.indd 36
10/01/05 10:39
he t e k n! i l o i e p v i m r a D h C ld r o W C R W 1992 LANCIA DELTA INTEGRALE
ITEM 58446 DF-03Ra L: 407mm
Relive the glory of the 1992 WRC season with this R/C assembly kit of the Lancia Delta Integrale. The Lancia’ s famous body design, including its distinctive blister fenders, has been beautifully reproduced in polycarbonate while large stickers recreate the bold Martini livery. The exciting 4WD DF-03Ra chassis features front and rear ball differentials to provide superb traction on both on-road and off-road surfaces. In addition, the 16-spoke wheels and rally block tires will let you immerse yourself in the rally car world.
4WD
New front damper stay and suspension arms are matched with the buggy chassis’highly dust proof gearbox.
DATSUN 240Z RALLY ITEM 58459 DF-03Ra
Image shows prototype
35
RC_2010v1_E_01_38_0114EDT.indd 35
Lancia is a registered trademark licensed by Fiat Group Automobiles S.p.A.
Kit includes two kinds of rear suspension arms, enabling compatibility with short wheelbase (251mm) bodies.
Mitsubishi LANCER Evolution X L: 451mm
4WD
ITEM 58440 DF-03Ra
L: 443mm
4WD
Images show assembled and painted model kits.
10/01/14 15:12
DB01 CHASSIS OPTION PARTS & SPARE PARTS 54017
54061
54051
54118
54119
DB01 Front One-Way Set
DB01 Double Slipper Clutch Set
DB01 Aluminum Center One-Way Pulley（18T）
DB01 WO Assembly Universal Shaft (Front)
DB01 WO Assembly Universal Shaft (Rear)
54016
54015
54140
54132
45038
DB01 Assembly Universal Shaft
DB01 Reinforced Drive Belt
Tamiya Brushless Motor 01 12T
Tamiya Brushless ESC 01
DB01 Assembly Universal Shaft （Rear）
（Front）
Dark Impact ITEM 58370 DF-03
Rising Storm L: 387mm
4WD
L: 400mm
4WD
Plasma Edge ITEM 58399 DF-02
Images show assembled and painted model kits.
RC_2010v1_E_01_38_0114EDT.indd 34
ITEM 58334 DF-02
L: 395mm
4WD
L: 384mm
2WD
Sand-Viper ITEM 58374 DT-02
34
10/01/14 15:11
DB01 CHASSIS OPTION PARTS & SPARE PARTS 54148
54149
54040
53972
54079
DB01 Aluminum Steering Post (Blue)
DB01 Aluminum Racing Steer Set (Blue)
DB01 Motor Heat Sink
TRF501X Aluminum Steering Bridge
(Blue)
53884
54204
54041
54036
54035
TA05 Carbon Battery Plate Set
DB01 High-Traction Chassis
DB01 Carbon Reinforced Chassis
DB01 Carbon Reinforced M Parts（Damper Stay）
DB01 Carbon Reinforced L Parts（Center Cover）
54034
54033
53984
54134
53968
DB01 Carbon Reinforced D Parts（Caster Block）
DB01 Carbon Reinforced A Parts（Differential Cover）
Buggy Racing Wing
Buggy Lowered Mounting Racing Wing Set
DB01 Aluminum Motor Mount
Hard Hex Head Ball Connector （5pcs.） 5x5mm（53968）5x8mm（53969）
54028
42132
42133
Buggy Aeration Oil Filled Damper Set
HL Cylinder For Aeration Dampers (Front, 2pcs.)
HL Cylinder For Aeration Dampers (Rear, 2pcs.)
54037
54038
53961
53962
54039
DB01 Aluminum Suspension Mount（Front）
DB01 Aluminum Suspension Mount（Rear）
TRF501X Aluminum Caster Block
TRF501X Aluminum Rear Upright
DB01 Aluminum Suspension Block (2pcs.)
53963
54141
54142
53967
54018
DB01 High-Traction Lower Arm
TRF501X Adjustable Belt Tensioner
DB01 Slipper Clutch Set
TRF501X Stabilizer Set
Basic Upgrade Parts
Tires & Suspension Parts
54205
TRF501X Setting Spring Set
DB01 Aluminum Damper Bushing (2pcs.)
（Front）*Use with TRF501X damper
（10° ）※ Use with ITEM 54015
DB01 High-Traction Lower Arm （Front）
53974
（Rear）
Transmission Parts
33
RC_2010v1_E_01_38_0114EDT.indd 33
10/01/14 15:10
C E P S E C RA DNA DB01 Baldre ITEM 58404 DB01 L: 395mm
The fiberglass-reinforced nylon chassis has a low
The 4-wheel independent double wishbone suspension
center of gravity layout and d a flat undersurface
features upper arms with turnbuckles and multiple
which offers excellent skid characteristics.
CVA damper attachment positions for customizable settings.
4WD
This dynamic R/C buggy has inherited the highperformance DNA of the race-proven TRF501X. The centrally-mounted spur gear is paired with equal-length drive belts for efficient power transfer, and this drivetrain is protected by ABS resin covers to prevent interference from dirt and debris. Front and rear bulkheads are also integrated with the chassis to enhance ease of maintenance. The four-wheel double wishbone suspension setup, taken from the TRF501X, works with the high-density spike tires and large dish wheels to provide superb off-road traction.
OD O G S Y A W S AL IT ’ NS O I T P O E TO HAV
The DB01 has been fitted with a smorgasbord of Option Parts to result in the even more potent DB01R. A special bathtub chassis is used to accommodate the motor heat sink, and the drivetrain features a slipper clutch, reinforced drive belts, and front/rear universal joints for enhanced efficiency. Aeration oil dampers with aluminum bushings and high-traction suspension arms are also included in the comprehensive list of race-spec components.
Main Mai n Spec S Specifi p ifications pec cation cat ionss ● DB01R Special Chassis ● Aeration Oil Dampers ● Aluminum Suspension Mounts (Front/Rear) ● Aluminum Suspension Blocks ● 5mm Suspension Balls ● Slipper Clutch ● Reinforced Drive Belts ● High-Traction Lower Arms (Front/Rear) ● Carbon Reinforced M Parts (Damper Stay) ● Assembly Universal Shafts (Front/Rear) ● Motor Heat Sink
DB01R Chassis Kit ITEM 84100 L: 395mm
4WD
Body, wing, motor, tires, wheels, R/C system, battery, and charger sold separately.
Images show assembled and painted model kits.
RC_2010v1_E_01_38_2EDT.indd 32
32
10/01/05 10:33
TB-03/TB-03D CHASSIS 54076
54053
TB-03 Wheel Axles for Assembly Universal Shaft
TB-03 Aluminum Propeller Joint Set (Rear)
54137
54128
54129
TB-03D Aluminum Rear Upright (1°)
TB-03D Aluminum Bumper Support
TB-03D Aluminum Motor Spacer
51359
51357
51306
Xanavi NISMO GT-R (R35) Body Parts Set
ARTA Garaiya Body Parts Set
Raybrig NSX 2007 Body Parts Set
Basic Upgrade Parts
Tires & Suspension Parts
54055
54094
54126
TB-03 04 Module Spur Gear
TB-03 Aluminum Spur Gear Mount
TB-03 Center One-Way Set
54130
51372
TB-03D Aluminum Wheel Hubs
ORC Amemiya SGC-7 Body Parts Set
（96T）
（Brake Disc-Shaped）
54124
54125
TB-03D Carbon Damper Stay
TB-03D Direct Coupling
（Front）
Transmission Parts
The Ultimate Drift Machine! Experience the sharp response offered by the shaft-driven 4WD system on this TB03D chassis kit. The front damper stay has been changed and features the normal type suspension system. The chassis is also equipped with 16-spoke black metal plated wheels and super driftech tires for long-lasting drift action! Adding to the drift mood of this machine are dress-up parts including the exhaust, intercooler, brake disc shaped wheel hubs and much more. Just install your favorite car body and you are ready to drift.
TB-03D Chassis Kit ITEM 58420
4WD
L: 363mm
Body, motor, R/C system, battery, charger are separately available.
31
RC_2010v1_E_01_38_0114EDT.indd 31
Images show assembled and painted model kits.
10/01/14 15:08
TB-03/TB-03D CHASSIS OPTION PARTS
Basic Upgrade Parts
Tires & Suspension Parts
Transmission Parts
54054
54090
54089
54075
54091
TB-03 Aluminum Motor Adapter
TB-03 Aluminum Servo Stay (R)
TB-03 Carbon Bumper Support
TB-03 Fluorine Coated Ball Head King Pin
TB-03 Aluminum Servo Stay (L)
54093
54095
54096
54097
54098
TB-03 Aluminum Heat Sink
TB-03 Aluminum Racing Steering Set
TB-03 Aluminum Servo Stay（R）
TB-03 Carbon Steering Link
TB-03 Carbon Reinforced A Parts（Gear Case）
（for Transponder Stay）
54145
54146
54147
54150
54151
TB-03 EX Urethane Bumper
TB-03 Aluminum Damper Stay Mount
TB-03 Carbon Reinforced Chassis
TB-03 Aluminum Motor Mount
TB-03 High Precision Bearing Holder
54099
49499
42102
42131
54083
TB-03 Carbon Reinforced K Parts（Stiffener）
TB-03 Titanium Screw Set
TRF Special Damper (Hard Black Coating) 4pcs.
HL Cylinder for TRF Special Dampers（2pcs.）
TA05 & TA05-IFS Short Reversible Suspension Set
53993
53842
54064 ∼ 54074 54064 54065 54066 54067 54068 54069 54070 54071 54072 54073 54074
TB-03 Suspension Mount 1XD TB-03 Suspension Mount 1XC TB-03 Suspension Mount 1XB TB-03 Suspension Mount 1XA TB-03 Suspension Mount 1X TB-03 Suspension Mount 1A TB-03 Suspension Mount 1B TB-03 Suspension Mount 1C TB-03 Suspension Mount 1D TB-03 Suspension Mount 1E TB-03 Suspension Mount 1F
TA05-IFS Aluminum Rocker Arm Set
TA05 Stabilizer Set (F&R)
※ Image shows item 54064
54122
54123
54052
54057
54056
TB-03 Carbon Damper Stay
TB-03 Carbon Reinforced M Parts（Damper Stay）
TB-03 Aluminum Universal Propeller Shaft
TB-03 Front One-Way Unit
TB-03 Aluminum Differential Joint Set
（Rear）
Basic Upgrade Parts
Tires & Suspension Parts
Transmission Parts
30
RC_2010v1_E_01_38_0114EDT.indd 30
10/01/14 15:07
1/10
ORC Amemiya SGC-7 ITEM 58425 TB-03 L: 459mm
4WD
This is a 1/10 scale R/C assembly kit of the Mazda RX-7 based ORC Amemiya SGC-7, which was the only rotary-powered entry in the 2008 Super GT race season. The polycarbonate body realistically captures the sleek form of this machine, while separately molded side mirrors and rear wing as well as polycarbonate light cases and fenders enhance scale realism. Its shaft-driven 4WD TB-03 chassis features longitudinally-mounted motor and a low center of gravity bathtub frame with built-in motor cooling duct. Front and rear ball differentials and 3-piece propeller shaft efficiently transmit power to the wheels. The four wheel double wishbone suspension system features inboard front suspension, short reversible arms and uprights from the TRF416.
XANAVI NISMO GT-R（R35） ITEM 58412 TB-03
CALSONIC IMPUL GT-R（R35） L: 456mm
4WD
TB-03R CHASSIS KIT ITEM 84109
ITEM 58434 TB-03
L: 456mm
4WD
L: 442mm
4WD
TAKATA DOME NSX 4WD
ITEM 58424 TB-03
Body, Tires, motor, R/C system, battery, charger are separately available.
29
RC_2010v1_E_01_38_0114EDT.indd 29
Images show assembled and painted model kits.
10/01/14 15:07
TA05 ver.II CHASSIS OPTION PARTS 53918
21
53876
Basic Upgrade Parts
53850
22
51332
23
Tires & Suspension Parts
24
54137
Transmission Parts
25
TRF Damper Low Friction V Parts (Damper Collar) 2pcs.
Aluminum Damper Retainer (1mm Down Type)
TRF Damper Titanium Coated Piston Rod (2pcs.)
TRF416 C Parts (Front Upright)
TB-03D Aluminum Rear Upright (1°)
54031
53500
54076
51092
53724
26
27
28
29
30
TA05-IFS Carbon Reinforced ） F Parts（Hub Carrier 4°
Cross Joints For Assembly Universal Shaft Set
TB-03 Wheel Axles for Assembly Universal Shaft
TB Evo IV 46mm Swing Shafts
TB Evo IV 46mm Lightweight Rear Swing Shaft
53857
53952
54170
53833
53877
31
32
33
34
04 Module GP Spur Gear 105T (TA05)
Center One-Way Set for Porsche Type 934
TA05 Ver.II Low Friction Drive Belt (342mm)
TA05 Front One-Way Unit
TA05 Front Direct Coupling
53919
53849
54023
53989
53970
TA05 High Precision Differential Joint
DB01 Front One-Way Pulley (37T)
Center Pulley (18T)
Ball Differential Protective Seal
35
TA05 Aluminum Differential Joint
36
LAMBORGHINI GALLARDO LP560-4 SUPER TROFEO ITEM 58456 TA05 ver.II
Images show assembled and painted model kits.
RC_2010v1_E_01_38_2EDT.indd 28
L: 450mm
COROLLA Axio apr GT 4WD
ITEM 58448 TA05 ver.II
L: 435mm
4WD
28
10/01/05 10:29
TA05 ver.II CHASSIS OPTION PARTS 54019
53993
1
53992
2
3
54095
4
54090
5
TA05-IFS Aluminum Bulkhead
TA05-IFS Aluminum Rocker Arm Set
TA05-IFS Aluminum Rocker Nut
TB-03 Aluminum Racing Steering Set
TB-03 Aluminum Servo Stay (R)
54091
53905
53837
54197
53869
6
7
8
TB-03 Aluminum Servo Stay (L)
TA05 Aluminum Side Brace
Aluminum Motor Heat Sink
TA05 ver.II Aluminum Motor Mount Set
5mm Aluminum Short Ball Nut (Blue/10pcs.)
53932
53933
53916
53892
53842
Aluminum Suspension Mount Spacer (0.5mm/4pcs.)
Aluminum Suspension Mount Spacer (1mm/4pcs.)
TA05 Aluminum Stabilizer Holder
3x10mm Aluminum Turnbuckle Shaft (4pcs.)
TA05 Stabilizer Set (F & R)
53906
53907
53968
53884
54196
5x5mm Aluminum Hex Head Ball Connector (5pcs.)
5x8mm Aluminum Hex Head Ball Connector (5pcs.)
5x5mm Hard Hex Head Ball Connector (5pcs.)
TA05 Carbon Battery Plate Set
TA05 ver.II Carbon Reinforced K Parts（Stiffener）
53894
53845
53994
53882
53873
11
TA05 Carbon Reinforced A Parts (Bulkhead)
53928
TA05 Carbon Damper Stay （Front）
53917
17
14
TA05-IFS Carbon Damper Stay （Rear）
53851
18
19
9
12
15
10
13
16
TA05 Carbon Mount Spacer for Damper Stay
Carbon Damper Stay Setting Spacer Set
42102
54171∼ 54175
20
54171 54172 54173 54174 54175
Short Reversible Suspension Arm
Basic Upgrade Parts
2.6 dia. Titanium Coated Suspension Shaft Set
Tires & Suspension Parts
46mm Titanium Coated Suspension Shafts (2pcs.)
TRF Special Damper Set (Hard Black Coating)
TA05 ver.II Separate Sus Mounts（1X） TA05 ver.II Separate Sus Mounts（1A-1XA） TA05 ver.II Separate Sus Mounts（1B-1XB） TA05 ver.II Separate Sus Mounts（1C-1XC） TA05 ver.II Separate Sus Mounts（1D-1XD）
Transmission Parts
27
RC_2010v1_E_01_38_0114EDT.indd 27
10/01/14 15:06
33
11
14 15 35
TA05 ver.II CHASSIS OPTION PARTS USAGE EXAMPLE 12
29
3
9
32
4 24 27 28
30
31
13
2
FRONT
17
18 36 7
34 1 5
6 26 31
8 1
54019
TA05-IFS Aluminum Bulkhead
2
53993
TA05-IFS Aluminum Rocker Arm Set
3
53992
TA05-IFS Aluminum Rocker Nut
4
54095
TB-03 Aluminum Racing Steering Set
5
54090
TB-03 Aluminum Servo Stay (R)
6
54091
TB-03 Aluminum Servo Stay (L)
7
53905
TA05 Aluminum Side Brace
8
54197
TA05 ver.II Aluminum Motor Mount
9
53892
3x10mm Aluminum Turnbuckle Shaft (4pcs.)
10 53842
TA05 Stabilizer Set (F & R)
11 53906
5x5mm Aluminum Hex Head Ball Connector
12 53884
TA05 Carbon Battery Plate Set
13 54196
TA05 ver.II Carbon Reinforced K Parts（Stiffener）
14 53994
TA05-IFS Carbon Damper Stay（Rear）
15 53882
TA05 Carbon Mount Spacer for Damper Stay
16 53873
Carbon Damper Stay Setting Spacer Set
17 53928
Short Reversible Sus Arm
18 53917
2.6 dia. Titanium Coated Suspension Shaft Set
19 53851
46mm Titanium Coated Suspension Shafts (2pcs.)
20 42102
TRF Special Damper Set (Hard Black Coating)
21 53918
TRF Damper Low Friction V Parts (Damper Collar) (2pcs.)
22 53876
Aluminum Damper Retainer (1mm Down Type)
23 53850
TRF Damper Titanium Coated Piston Rod (2pcs.)
24 51332
TRF416 C Parts (Front Uprights)
25 54137
TB-03D Aluminum Rear Upright (1°)
26 54031
TA05-IFS Carbon Reinforced F Parts (Hub Carrier)
27 53500
Universal Shaft Cross Joint
28 54076
TB-03 Wheel Axle
29 51092
TB Evo IV 46mm Swing Shaft
30 53724
TB Evo IV 46mm Lightweight Swing Shaft
31 53857
04 Module GP Spur Gear 105T (TA05)
32 53952
Porsche 934 Center One Way Set
33 54170
TA05 ver.II Low Friction Drive Belt (342mm)
34 53833
TA05 Front One-Way Unit
35 53919
TA05 Aluminum Differential Joint
36 54023
DB01 Front One-Way Pulley (37T)
25 20 21 16
32 10 19 23 22
REAR
1
Please use the numbers in the Usage Example to refer to the corresponding Option Part in the Parts List.
26
RC_2010v1_E_01_38_0115EDT.indd 26
10/01/15 11:48
An Agility Boost FRONT/REAR BALL DIFFERENTIAL
URETHANE BUMPER
CVA SUPER MINI SHOCK UNIT
TAMIYA BATTERY PACK （NOT INCLUDED）
EQUAL LENGTH FRONT/REAR DRIVE BELTS
CENTER MOUNTED SPUR GEAR
DOUBLE WISHBONE SUSPENSION
RACING SLICK TIRE
ALUMINUM DIE-CAST MOTOR MOUNT
ELECTRONIC SPEED CONTROLLER ONE-PIECE WHEEL
BATHTUB TYPE FRAME/CHASSIS
STEERING SERVO （NOT INCLUDED）
ELECTRIC MOTOR RECEIVER （NOT INCLUDED）
（NOT INCLUDED）
Tamiya's Tami a's 2 2-belt belt driven dri en TA05 chassis, chassis a perennial favorite fa orite of the 4WD R/C touring to ring car
brushed are ideal for br shed and brushless br shless motors alike while hile the combination of front/ fron
scene, has evolved to the next level. The chassis width has been reduced as much as
rear 37T and 18T center pulleys provide efficient power transmission. Furthermore,
possible to enable a greater roll movement range during cornering and a one-piece
separate-type suspension mounts will help make maintenance a breeze.
aluminum motor mount with cantilever center shaft helps shift weight towards the center of the chassis for optimum balance. These characteristics are coupled with short reversible suspension arms, the same as those used on the TA05-IFS R, and uprights with 1050 bearings to give the chassis nimble handling. Built-in motor cooling ducts
●Wheelbase: 257mm ●Tread: 165mm ●Motor: Type RS540 ●Drivetrain: Horizontally-mounted motor, 2-belt driven 4WD (w/equal-length belts) ●Diff Gear: F/R Ball diff ●Steering: 3-piece tie rod ●Suspension: 4-wheel double wishbone ●Dampers: F/R CVA oil dampers ●Gear Ratio: 7.19:1 ●Tire Width/Diameter: F/R 24/64mm ●Speed Controller: ESC *Some models may vary.
The high-performance 2-belt driven 4WD TA05-IFS chassis features the innovative Inboard Front Suspension (IFS), which sees the front dampers mounted horizontally and within the wheelbase, resulting in an even lower center of gravity. Suspension settings can be customized thanks to the use of lightweight front and rear reversible suspension arms. In addition, the new front profile, which is even lower than the height of the tires, means vehicle with low-nose body designs can be recreated much more accurately. ●Wheelbase: 257mm ●Tread: 165mm ●Motor: Type 540 ●Drivetrain: Horizontally-mounted motor, 2-belt driven 4WD ●Diff Gear: F/R Ball diff ●Steering: 3-piece tie rod ●Suspension: 4-wheel double wishbone ●Dampers: F/R Mini CVA oil dampers ●Gear Ratio: 7.159:1 ●Tire Width/Diameter: F/R 24/64mm ●Speed Controller: ESC *Some models may vary.
Innovative Inboard Front Suspension
With a highly efficient drivetrain developed with knowledge gained from R/C racing, the 2-belt driven 4WD TA05 chassis is built for the track. The centrally mounted spur gear drives the equal-length front and rear drive belts, which are designed to reduce slack for optimum power transmission. The chassis has a low center of gravity design and features the motor and R/C units mounted on the left and the battery mounted on the right for excellent weight distribution and balance. Furthermore, the 4-wheel double wishbone suspension is equipped with oil dampers and front/rear ball differentials to provide superior handling performance.
Take Your R/C Racing to the Next Level L l 25
RC_2010v1_E_01_38_0114EDT.indd 25
●Wheelbase: 257mm ●Tread: 157mm ●Motor: Type 540 ●Drivetrain: Horizontally-mounted motor, 2-belt driven 4WD ●Diff Gear: F/R Ball diff ●Steering: 3-piece tie rod ●Suspension: 4-wheel double wishbone ●Dampers: F/R Mini CVA oil dampers ●Gear Ratio: 7.159:1 ●Tire Width/Diameter: F/R 24/64mm ●Speed Controller:
ESC *Some models may vary.
Images show assembled and painted model kits.
10/01/14 15:03
M-05 CHASSIS OPTION PARTS & SPARE PARTS 50683
53254
50686
M-Chassis 60D Radial Tires
M-Chassis 60D Super Grip Radial Tires（1 Pair）
M-Chassis 60D Inner Sponge Set
53341
51362
51363
54121
Mini Cooper Reinforced Wheels
M-Chassis 18-Spoke Wheels (4pcs.)
Fiat 500 Body Parts Set
Aluminum Horn for Hi-Torque Servo Saver
（1 Pair）
51237
Suzuki Swift Super 1600 Wheels
53255
50569
M-Chassis 60D Inner Sponge
Mini Cooper Wheels（1 Pair）
（Hard） （4pcs.）
（4pcs.）
（1 Pair）
54191
54192
54193
54194
54195
M-05 Aluminum Racing Steering Set
M-05 Aluminum Steering Link
M-05 Aluminum Steering Post
M-05 Ball Differential Set
M-05 Aluminum Turnbuckle Steering Rod
53569
54184
54000
54213
54212
Clamp Type Aluminum Wheel Hub（6mm Thick）
M-05 Aluminum Motor Plate
M-Chassis Aluminum Damper Set（4pcs.）
M-Chassis 3x48.5mm Titanium Coated Suspension Shafts (2pcs.)
M-Chassis 3x37mm Titanium Coated Suspension Shafts (2pcs.)
42134
53630 ∼ 33
53443
54182
53983
53630
53631
53632
53633
HL Cylinder for M-Chassis Aluminum Dampers (2pcs)
TRF Short Damper Spring
Silicone Damper Oil Soft Set
M-05 Adjustable Upper Arm Set
Lightly-Tuned Motor（28T）
53597
53681
53390
53509
54183
M03 Assembly Universal Shaft Set
Titanium Wheel Axle for Assembly Universal Shaft
Hard Fluorine Coated 06 Aluminum Pinion Gear (20T)
M-Chassis Reinforced Freewheel Axle Set
Basic Upgrade Parts
Tires & Suspension Parts
（M03, M04）Hollow Carbon
Gear Shaft
Transmission Parts
24
RC_2010v1_E_01_38_0114EDT.indd 24
10/01/14 15:02
Alfa Romeo MiTo
ITEM 58453 M-05L Wheel Base: 239mm L: 385mm
2WD
Alfa Romeo is a registered trademark licensed by Fiat Group Automobiles S.p.A.
The three-door Alfa-Romeo MiTo made its debut in June 2008 in Milan. It was named after Milan, where it was designed, and Torino, where it was manufactured. The stylish form of the MiTo has been realistically reproduced with a durable polycarbonate body which is mounted on the nimble M-05 chassis. The gearbox, battery pack, receiver, and servo have been positioned for optimum weight distribution and a lower center of gravity. The four wheel double wishbone suspension setup and 3-piece steering linkage offer sharp, stable cornering performance.
Honda S800 RACING ITEM 58454 M-05S
ABARTH 500 ASSETTO CORSE L: 360mm
2WD
ITEM 58444 M-05M
L: 365mm
MINI COOPER RACING 2WD
ITEM 58438 M-05S
L: 315mm
2WD
Wheel Base: M-05S 210mm / M-05M 225mm / M-05L 239mm
M-05 PRO Chassis Kit ITEM 58443
2WD
Body, motor, R/C system, battery, charger are separately available.
The immensely popular M-chassis has been thoroughly re-engineered. The durable, lightweight semi-monocoque resin frame features a low center of gravity and optimum chassis balance. The 4-wheel double wishbone suspension system provides superb handling, while the 3-piece steering linkage ensures excellent stability during high-speed cornering. Needless to say, the PROspec chassis comes standard with a variety of highperformance Option Parts. Three wheelbase lengths are possible by switching out suspension parts, allowing various M-chassis bodies to be mounted.
23
RC_2010v1_E_01_38_0115EDT.indd 23
Images show assembled and painted model kits.
10/01/15 11:48
1/10
BMW M3 SPORT EVO DRIFT SPEC ITEM 58451 TT-01D TYPE-E w/LED Lights
NISSAN GT-R DRIFT SPEC L: 448mm
4WD
L: 459mm
4WD
L: 444mm
4WD
L: 452mm
4WD
NISSAN SKYLINE GT-R (R32) DRIFT SPEC PEC
LEXUS GS 400 DRIFT SPEC ITEM 58432 TT-01D TYPE-E w/LED Lights
ITEM 58455 TT-01D TYPE-E w/LED Lights
ITEM 58428 TT-01D w/LED Lights
22
RC_2010v1_E_01_38_3EDT.indd 22
10/01/08 14:10
TT-01 & TT-01 TYPE-E CHASSIS OPTION PARTS 53665
Basic Upgrade Parts
Transmission Parts
53590
54026
53620
TT-01 Spur Gear Set (55T/58T)
TT-01 Aluminum Propeller Joint & Shaft Set
TT-01 Aluminum Propeller Shaft
TT-01 Front One-Way Unit
Cup Joint for TB-01 Reinforced Front One-Way Unit
53663
53790
53792
53506
53569
11
14
15
53671
Tires & Suspension Parts
12
16
13
17
18
*Use with Item 53792
Ball Differential Set (TT-01/TGS)
Cup Joint for Universal Shaft (TT-01/DF-02)
Assembly Universal Shaft (TT-01/TA04)
39mm Lightweight Rear Swing Shaft for Assembly Universal Shaft Set
53909
53937
54008 ∼ 54014・53910 ∼ 53912
Clamp Type Aluminum Wheel Hub (6mm Thick)
54013 φ5mm
Ra Rain R ai Rainbow
54014 φ5mm ・Randam Rain R ai Rainbow
53910
54008
φ5mm
φ3mm
White
White
54009 φ3mm
Red
53911 11 1 φ5mm
Red
54010 10 0 φ3mm
Blue
53912 12 12 φ3mm
Orange
LED Light Unit (TLU-01)
LED Light Control Unit (TLU-02)
54012 01 12 12 φ5mm
Blue
Mercedes AMG DTM -C Class 2008- Original nall TTeile eililile L: 452mm
4WD
L: 443mm
4WD
ITEM 58433 TT-01 TYPE-E w/LED Lights
L: 460mm
4WD
L: 434mm
4WD
Subaru Impreza WRC '08
Mitsubishi Lancer Evolution X ITEM 58437 TT-01 TYPE-E w/LED Lights
Yellow
LED Lights
BMW M3 GT2 2009 ITEM 58449 TT-01 TYPE-E w/LED Lights
54011 11 1 φ5mm
ITEM 58426 TT-01 TYPE-E w/LED Lights
21
RC_2010v1_E_01_38_3EDT.indd 21
10/01/08 14:09
TT-01 & TT-01 TYPE-E CHASSIS OPTION PARTS
Basic Upgrade Parts
53497
54025
53670
TT-01 Ball Bearing Set
TT-01 Type-E Ball Bearing Set
TT-01 Aluminum Racing Steering Set
*Not compatible with TT-01 Type-E.
1
53864
Tires & Suspension Parts
Transmission Parts
53662
2
TT-01 Aluminum Steering Link
TT-01 Turnbuckle Tie-Rod Set
53448
53682
53664
*Not compatible with TT-01 Type-E.
53672
53159
3
TT-01 Carbon Upper Frame
4
5
6
*Not compatible with TT-01 Type-E.
4mm Anodized Aluminum Flange Lock Nuts (Blue, 5pcs.)
4mm Hard Lock-Nut & Spacer Set
Aluminum Bumper Stopper (TT-01/TGS)
TT-01 Aluminum Motor Heat Sink
53779
53983
53694
53695
53800
GT-Tuned Motor（25T）
Lightly-Tuned Motor（28T）
TT-01 Front Stabilizer Set
TT-01 Stabilizer Set（Rear）
Aluminum Toe-In Rear Uprights (TT-01/TGS)
53571
53440
TRF Damper Set
On-Road Tuned Hard Spring Set
7
*Use with Item 51217
53673
53674
Toe-In Rear Upright
Adjustable Upper Arm Set (TT-01/TGS)
（TT-01, TGS）
ITEM 58450
9
42102
10
TRF Special Damper (Hard Black Coating) 4pcs.
（Fluorine Coated）
8
4WD
Raring R i to R Race!! The TT-01 Type-E chassis has been well received by R/C fans around the world and now Tamiya is proud to introduce the race-spec version, the TT-01R Type-E, which is fine-tuned with a variety of Option Parts. The suspension features CVA shock units, adjustable upper arms, and toe-in rear uprights to enable more setting possibilities. The drivetrain is fitted with ball bearings as well as an aluminum propeller joint and shaft set to reduce friction loss. Also included are Medium Narrow Racing Radial Tires and a Lightly-Tuned Motor (28T).
Images show assembled and painted model kits.
RC_2010v1_E_01_38_2EDT.indd 20
Main Contents ● CVA Super Mini Shock Unit Set ● TG10 Wheel Axle ● 39mm Drive Shaft Set ● Medium-Narrow Racing Radial Tires ● Medium-Narrow 5-Spoke Wheels (White) ● TT-01 Toe-in Rear Upright ● 5mm Aluminum Ball Connector (Blue) ● TT-01 Spur Gear Set (55T/58T) ● Lightly-Tuned Motor (28T) ● TT-01 Type-E Ball Bearing Set ● Gearbox Joints for 39mm Drive Shafts ● TT-01 Adjustable Upper Arm Set
(w/3x18mm Aluminum Turnbuckle Shafts) ● TT-01 Aluminum Propeller Joints & Shaft Set
(TB Evolution IV Lightweight Aluminum Propeller Shaft)
20
10/01/05 10:19
8
16
9
TT-01 CHASSIS OPTION PARTS USAGE EXAMPLE 2
18
7
9
12
3
6
17
1 6
11
3
FRONT
20
5
13
10
1
53670 TT-01 Aluminum Racing Steering Set
2
53864 TT-01 Aluminum Steering Link
3
53672 TT-01 Carbon Upper Frame
4
53159 4mm Anodized Aluminum Flange Lock Nuts (Blue, 5pcs.)
5
53682 Aluminum Bumper Stopper (TT-01/TGS)
6
53664 TT-01 Aluminum Motor Heat Sink
7
53694 TT-01 Stabilizer Set (Front)
8
53800 Aluminum Toe-In Rear Upright (TT-01/TGS)
9
53674 Adjustable Upper Arm Set (TT-01/TGS)
16
14
10 42102 TRF Special Damper (Hard Black Coating) 4pcs. 11 53665 TT-01 Spur Gear Set (55T/58T) 12 53620 TT-01 Aluminum Propeller Shaft 13 53671 TT-01 Front One-Way Unit 14 53663 Ball Differential Set (TT-01/TGS) 15 53790 Cup Joint for Universal Shaft (TT-01/DF-02) 16 53792 Assembly Universal Shaft (TT-01/TA04) 17 53506 39mm Lightweight Rear Swing Shaft for Assembly Universal Shaft Set
19
7
18 53569 Clamp Type Aluminum Wheel Hub (6mm Thick)
10
15
REAR
19 51217 TT-01D B Parts (Suspension Arms) 20 51218 TT-01D Urethane Bumper
Basic Upgrade Parts
Tires & Suspension Parts
1 Transmission Parts
CHECK!!
Please use the numbers in the Usage Example to refer to the corresponding Option Part in the Parts List.
19
RC_2010v1_E_01_38_2EDT.indd 19
10/01/05 10:18
Performance-Enhanced TT-01 Type-E Chassis
1/10
Upper Deck This new chassis feature is made from fiberglass-reinforced nylon resin for heightened rigidity.
URETHANE BUMPER
Steering 3-piece tie rod steering system features posts made from precision aluminum to reduce slop.
RACING RADIAL TIRE DOUBLE WISHBONE SUSPENSION
STEERING SERVO （NOT INCLUDED）
RECEIVER （NOT INCLUDED）
ELECTRONIC SPEED CONTROLLER （NOT INCLUDED）
BATHTUB TYPE FRAME/CHASSIS
TAMIYA BATTERY PACK (NOT INCLUDED)
ELECTRIC MOTOR
TRANSPONDER STAY
MOTOR GUARD
UPPER DECK
TT-01 TYPE E UPRIGHT
DOUBLE WISHBONE SUSPENSION
FRICTION DAMPER UNIT
Images show assembled and painted model kits.
RC_2010v1_E_01_38_0114EDT.indd 18
Transponder Stay Upper deck features conveniently integrated transponder stay for those days at the race circuit.
Upright Front and rear uprights feature a new design created specifically for the TT-01 Type-E.
Damper Stay The damper stay is separately molded from the gear cover and has two damper attachment points. 18
10/01/14 15:02
URETHANE BUMPER
Step into the R/C World The TT-01 chassis is designed to be user-friendly and easy to assemble. The longitudinallymounted motor, R/C mechanisms, and battery are placed low to the ground in a very balanced layout for optimum weight distribution and superb handling. Propeller shaft and drive shafts are made from durable resin for even more weight savings. This is the perfect starter chassis and beginners can use it to kick off their R/C driving careers. Available in both assembly kit and Ready-to-Run Expert Built form.
RACING RADIAL TIRE DOUBLE WISHBONE SUSPENSION
STEERING SERVO （NOT INCLUDED）
TT-01 Basic Specifications ● Wheelbase: 257mm ● Motor: Type 540 ● Drivetrain: Shaft-driven 4WD ● Diff. Gear: F/R 3-bevel diff. ● Steering: 3-piece tie rod ● Suspension: 4-wheel double wishbone ● Dampers: F/R Friction dampers ● Gear Ratio: 8.35:1 ● Tire Width/Diameter: 27mm/67mm ● Speed Controller: ESC *Some models may vary.
E for Enhanced The TT-01 Type E chassis features an upper deck and gearbox covers made from fiberglassreinforced resin for greater structural rigidity. 3-piece steering system minimizes slop and works together with the 4-wheel double wishbone suspension to provide sharp response. Furthermore, the chassis features a simple parts layout for effortless assembly and settings adjustment. A wide range of separately available Option Parts enables nearly endless possibilities for customization of both performance and appearance.
RECEIVER （NOT INCLUDED）
ELECTRONIC SPEED CONTROLLER （NOT INCLUDED）
BATHTUB TYPE FRAME/CHASSIS
TAMIYA BATTERY PACK (NOT INCLUDED)
TYPE 540 MOTOR DOUBLE WISHBONE SUSPENSION
TT-01 TYPE-E Basic Specifications ● Wheelbase: 257mm ● Motor: Type 540 ● Drivetrain: Shaft-driven 4WD ● Diff. Gear: F/R 3-bevel diff. ● Steering: 3-piece tie rod ● Suspension: 4-wheel double wishbone ● Dampers: F/R Friction dampers ● Gear Ratio: 8.35:1 ● Tire Width/Diameter: 27mm/67mm ● Speed Controller: ESC *Some models may vary.
FRICTION DAMPER UNIT
17
RC_2010v1_E_01_38_2EDT.indd 17
10/01/05 10:16
’ 02,’ 02, 04,’ 0 04, 08 WORLD ORLD CHAMPION TEAM 2008 IFMAR ISTC World Championship（Winner） 2008 EFRA ETC Euro Championship（Winner） 2008 DHI Cup（Winner） 2008 LRP Touring Car Masters（Winner） EURO Touring Series 08/09（Overall Winner） 2009 DHI Cup（Winner） 2009 LRP Touring Car Masters（Winner） 2009 EFRA ETC Euro Championship（Winner）
The world championship winning TRF team has been taking advantage of the large amount of race data recorded by our worldwide team drivers to refine the TRF416WE in order to win the 2010 IFMAR world championship, resulting in this new TRF416X. Motor position has been shifted 1mm to the center, and the rear ball differential has been moved further back to improve left/ right cornering balance, rear traction, and acceleration. Wider front bulkhead attachment screw positions and new lower deck shape enhance the chassis’ rigidity.
EAD L O T N R BO TRF416X CHASSIS KIT TRF41 42162 ITEM 4216
4WD
Body, motor, R/C system, battery, charger are separately available.
Transpeed Brushless 3.5T Transpeed Brushless 6.5T Transpeed Brushless 7.5T
ITEM 42124
Transpeed Brushless 6.5T Transpeed Brushless 7.5T Transpeed Brushless 8.5T Transpeed Brushless 9.5T
ITEM 42155
TRF511 CHASSIS KIT
ITEM 42156
ITEM 42139
Images show assembled and painted model kits.
RC_2010v1_E_01_38_2EDT.indd 16
ITEM 42125 ITEM 42126
ITEM 42157 ITEM 42158
ESC Volac Brushless BL2
ITEM 42144
4WD
Body, motor, R/C system, battery, charger are separately available.
16
10/01/05 10:14
Mounted on either side of the longitudinally loaded battery are the receiver and ESC. The R/C unit trays rotate for easy battery installation.
The aluminum diff. housing provides a high precision smooth moving action and makes changing tires a breeze. *Image shows cutaway view of diff. housing.
F104 PRO ITEM 58431 L: 410mm
The F104 chassis is a totally new design which allows you to experience the sharp handling of the Direct Drive. The three-point suspension and the longitudinally-mounted battery layout result in a slim chassis. Furthermore, true to its“PRO�designation, the F104 comes with Carbon Upper & Lower Decks, Carbon Rear Shaft, Aluminum Diff. Housing, Carbon Friction Plate, TRF Damper, and much more.
F104 PRO (w/Lightweight Body) y) ITEM 84106 L: 410mm
The excellent F104 PRO chassis now w comes released with a specially molded d lightweight polycarbonate body to o further bring out its potential. The lighter er body helps reduce chassis weight and d lowers the center of gravity to enhance e cornering performance even more. e. ec In addition to the included high-spec parts, a wide variety of Option Parts are e 4. available to further customize your F104.
15
RC_2010v1_E_01_38_0114EDT.indd 15
Images show assembled and painted model kits.
10/01/14 15:00
F104 CHASSIS OPTION PARTS
Basic Upgrade Parts
Tires & Suspension Parts
Transmission Parts
54166
54163
54164
54167
54168
F104 Aluminum Motor Mount
F104 Carbon Lower Deck
F104 Carbon Upper Deck
F104 Sponge Tires B (4430, Front)
F104 Sponge Tires B (4435, Rear)
54201
54200
54176
54169
54165
F104 Metal Plated Mesh Wheel Set for Rubber Tires
F104 Aluminum Body Mount Set
Formula-Tuned Motor（32T）
F104 Aluminum Pivot Post
F104 Soft T-Bar
54161
54154
54160
54158
54162
F104 Low Friction Suspension Ball Set
F103 Carbon Reinforced Front Upright
F104 Titanium Coated King Pin
F104 Aluminum Diff Housing Set
F104 Carbon Rear Shaft
（Right & Left）
（2pcs.）
14
RC_2010v1_E_01_38_2EDT.indd 14
10/01/05 10:12
1/10
FERRARI F60 ITEM 58447 L: 425mm
2WD
Tamiya is proud to add the Ferrari F60 to our direct-drive 2WD F104 Series line-up. Features such as the wide and low front wing, narrow and tall rear wing, and rear tapered side pontoons have all been accurately replicated on the R/C model’s body. Furthermore, the distinctive outboard mirrors and wheel fairings have also been reproduced. The F104 chassis has an FRP double deck layout, longitudinal battery position, 3-point suspension, stainless steel rear shaft, and resin differential housing to achieve superior handling performance.
54198
54199
54202
54203
54159
F104 Rubber Tires (Front, Hard)
F104 Rubber Tires (Rear, Soft)
F104 Aluminum Upper Suspension Mount
F104 Aluminum Servo Mount (L/R)
Aluminum Horn for Hi-Torque Servo Saver (F104)
13
RC_2010v1_E_01_38_2EDT.indd 13
10/01/05 10:12
● Images show prototypes and may differ from final product ● This publication is current as of January 2010 ● Specifications and availability are subject to change without notice
©2010 TAMIYA PRINTED IN JAPAN 1001CH
RC_2010v1_E_H1_H4 EDT2.indd 1
10/01/15 14:42