R/C Line-up 2012 Vol II

Volume2 2012

THE FUN WORLD OF R/C MODELS! Tamiya’ s R/C models feature authentic mechanisms and users can get a lot of enjoyment from assembling, driving, and customizing them. Go ahead and pick up a transmitter to open the door into this fun world of R/C!

R/C MODEL OPERATION

Watch as your R/C model responds to your control inputs. How does this work?

Steering Servo

CONTROLLING FROM A DISTANCE R / C s t a n d s f o r “ R a d i o C o n t r o l . ” Yo u r transmitter inputs are transformed into radio signals and sent to a receiver on the model, which uses these signals to activate the steering servo and electronic speed controller to operate the model. Powering the model is a battery pack which can be recharged for numerous rounds of fun driving.

Receiver

Transmitter

R/C Model

DRIVING R/C MODELS IS EASY! The wheel-trigger type transmitter is the most common type for R/C cars. The steering wheel and throttle trigger movements control direction and speed of the car respectively.

Braking and driving in reverse are also possible. In addition, steering range and speed can also be adjusted to match the control characteristics of the model to any situation.

Steering wheel controls model’ s direction.

Throttle trigger controls model’ s speed（forward/reverse）.

1

Steering Wheel

Throttle Trigger

Motor

BASIC ESSENTIALS Below are the items you need to start enjoying the R/C hobby.

CHOOSE YOUR FAVORITE MODEL Tamiya offers a wide range of R/C models, including on-road touring cars and off-road buggies. Choose the one with which you will begin your exciting R/C life.

Front Wheel

ESC

Battery

R/C SYSTEMS & BATTERY PACK A 2-channel R/C system, which consists of a transmitter, a receiver, a steering servo, and an electronic speed controller, is needed for R/C car operation. A 2.4GHz R/C system is recommended as it eliminates the need for frequency crystals and allows multiple models to safely operate in one area. Battery pack and corresponding charger are also required.

DON’ T FORGET SOME TOOLS

（Gray） R/C Tool Set（8pcs.） Modeler’ s Side Cutter α Item 74093

Item 74085

Proper assembly is key to an s driving performance, R/C model’ so basic tools such as side cutters, modeling knives, screwdrivers, and wrenches are needed. s precision-made tools are Tamiya’ useful not only for assembly but also performing maintenance.

ON ROAD MODELS

Rear Wheel

2

TAMIYA R/C MODELS CATALOG

THERE’ S ONE FOR EVERYBODY! Tamiya’ s extensive line-up of R/C models includes touring cars, racing buggies, rock crawlers, tractor trucks, etc., so choose the one that strikes your fancy.

P.4

P.5

P.5

P.6

P.7

P.8

P.10

P.11

P.15

Off-Road Models

3

P.14

P.13

P.7

On-Road Models

Other Models

XB Models

P.16 R/C Systems

TRF Series

TAMIYA R/C MODELS CATALOG

DT-02 CHASSIS

OFF-ROAD CAR

TAKE THE ACTION ANYWHERE These off-road models offer exciting R/C driving on any type of terrain.

Tamiya’ s product range includes fun-to-drive 2WD vehicles, pick-up trucks with large-diameter tires, and nostalgic buggy designs.

Super Fighter GR ITEM 58485 L: 384mm

Each model features an authentic suspension system such as double wishbones or trailing arms to ensure superb off-road performance.

Fully-enclosed gearbox protects against dirt and debris and is equipped with a differential for smooth cornering.

Each type of vehicle comes with its own set of appropriate tires.

OFF-ROAD CAR LINE-UP

Desert Gator

2WD

ITEM 58344 L: 384mm

Blackfoot III

Sand-Viper

2WD

ITEM 58374 L: 384mm

2WD

ITEM 58498 L: 445mm

Bush Devil II

Street Rover

2WD

ITEM 58522 L: 390mm

2WD

ITEM 58523 L: 443mm

Blitzer Beetle（2011）

Nissan Titan

2WD

ITEM 58511 L: 413mm

2WD

Mad Bull

2WD

ITEM 58205 L: 400mm

ITEM 58502 L: 394mm

2WD

Volkswagen Type 2（T1）Wheelie

Mitsubishi Montero Wheelie

ITEM 58512 L: 345mm

ITEM 58499 L: 385mm

The Hornet

2WD

ITEM 58336 L: 400mm

Avante（2011） ITEM 58489 L: 420mm

Hotshot（2007）

2WD

Holiday Buggy（2010） ITEM 58470 L: 390mm

2WD

ITEM 58347 L: 385mm

4WD

ITEM 58391 L: 390mm

4WD

Lunch Box

The Frog（2005）

Stadium Thunder（2012） ITEM 58524 L: 420mm

2WD

ITEM 58496 L: 430mm

2WD

ITEM 58354 L: 410mm

2WD

Fast Attack Vehicle（2011）

Sand Scorcher（2010）

2WD

ITEM 58452 L: 400mm

2WD

Mud Blaster II

2WD

ITEM 58514 L: 445mm

4

TAMIYA R/C MODELS CATALOG

RACING BUGGY EAT MY DUST!

These racing buggies have been developed using race data gathered by the TRF（Tamiya Racing Factory）team. Each model features a well-balanced layout, durable suspension system, and high-spec parts to ensure excellent performance at the track.

RACING BUGGY LINE-UP

DB02 CHASSIS

DB01 CHASSIS

DB02 Leonis

DN-01 CHASSIS

Durga 4WD

ITEM 58507 L: 410mm

Zahhak 4WD

ITEM 58395 L: 394mm

This buggy features a shaft-driven 4WD setup with horizontally-mounted motor for efficient power transmission and excellent stability. The aerodynamic body shell was designed by Toyota racing team and tuner, TOM’ S.

This 2-belt driven 4WD off-road buggy features the DNA of the race-proven TRF501X, including the same suspension geometry setup, and allows a wide range of setting options for the race track.

See Option Parts List on P.32

See Option Parts List on P.32

DF-03 CHASSIS

DF-02 CHASSIS

ITEM 58477 L: 382mm

2WD

This 2WD buggy was developed from the high-spec TRF201 and features the same chassis design, including the longitudinal battery position, 4-wheel double wishbone suspension, and the compact gearbox.

See Option Parts List on P.33

DF-02 CHASSIS

DF-02 CHASSIS

4WD

Dark Impact ITEM 58370 L: 387mm

4WD

Plasma Edge

4WD

ITEM 58399 L: 400mm

Gravel Hound ITEM 58328 L: 400mm

4WD

Rising Storm ITEM 58334 L: 395mm

M-05Ra CHASSIS

RALLY READY M-05Ra CHASSIS Based on the front wheel drive M-05 chassis, the rally-tuned M-05Ra chassis features a lightweight, narrow semi-monocoque frame. The 4-wheel independent double wishbone suspension is equipped with specially designed hub carriers and F/R uprights to increase ground clearance. Rally block tires are also included to allow you to enjoy both gravel and tarmac driving.

FWD

● Three Adjustable Wheelbase Lengths（210mm, 225mm, 239mm） ● Semi-Monocoque

Frame Chassis ● Front-Wheel Drive ● 3-Bevel Differential Gears ● 4-Wheel Double Wishbone Suspension ● Front/Rear Friction Dampers ● Gear Ratio=7.25:1 ● Tire Width/Diameter: 26/60mm ● 3-Piece Steering Tie-Rod ● Type 540 Motor

M-05Ra CHASSIS LINE-UP

In addition to the polycarbonate front skid guard, the chassis also includes polycarbonate side guards to protect the battery pack.

5

Rally block tires feature an asymmetrical block pattern tread for superb traction.

Alpine A110 ITEM 58471 L: 395mm

TAMIYA R/C MODELS CATALOG

DF-03Ra CHASSIS

BUGGY-BASED RALLY CHASSIS This durable monocoque chassis has the battery pack positioned longitudinally for optimum balance. Its 4-wheel double wishbone suspension is equipped with oil dampers and rally block tires to allow you to enjoy both gravel and tarmac driving.

4WD

● Wheelbase: 257mm ● Semi-Monocoque Frame Chassis ● Shaft-Driven 4WD ● Front/Rear Ball Differentials ● 4-Wheel Double Wishbone Suspension ● CVA Shock Unit Super Mini ● Gear Ratio=8.22:1, 7.90:1, 7.16:1 ● Tire Width/Diameter: 27/69mm ● Type 540 Motor

Suspension arms feature a special geometry. Adjustable upper arms allow a wider range of suspension settings.

Rear suspension is also designed for various setting possibilities. Kit includes additional suspension arms to enable short wheelbase（251mm）.

Front and rear compact gearboxes are equipped with ball differentials.

DF-03Ra CHASSIS LINE-UP

Lancia Delta Integrale

Mitsubishi Lancer Evolution X

Subaru Impreza WRC 2008

Subaru Impreza WRC Monte Carlo '07

ITEM 58446 L: 407mm

ITEM 58440 L: 443mm

ITEM 58430 L: 434mm

ITEM 58417 L: 446mm

Rally Block Tires These rally block tires feature a unique block pattern tread to provide ample traction on both gravel and tarmac track surfaces.

CC-01 CHASSIS

CROSS-COUNTRY CHASSIS The CC-01’ s highly reliable and efficient full-time 4WD system features a front-mounted motor, which transmits power to the front wheels via the gearbox and to the rear wheels via the propeller shaft with universal joints. ● Wheelbase: 242mm/252mm ● Ladder Frame Bathtub-Type Chassis ● Longitudinally-Mounted Motor, Shaft-Driven Full-Time 4WD ● 3-Bevel Differential Gears ● Front Double Wishbone and Rear 4-Link Rigid Suspension ● CVA Shock Units ● Gear Ratio=1:14.67 ● Tire Width/Diameter: 33/90mm ● Type 540 Motor

Toyota Land Cruiser 40

4WD

ITEM 58445 L: 426mm

CC-01 CHASSIS LINE-UP

Rear 4-link rigid suspension features link rods to support the durable axle housing.

Drive shaft with universal joints transmits power to the rear wheels. Rear differential may be locked during assembly.

Mercedes-Benz Unimog 406 Series U900

Ford Bronco 1973

ITEM 58457 L: 407mm

ITEM 58469 L: 422mm

6

TAMIYA R/C MODELS CATALOG

CR-01 CHASSIS KING OF THE HILL

The CR-01 chassis features a durable ladder frame with aluminum side channels and resin cross members as well as a 4-link rigid suspension with oil dampers that are actuated via aluminum pushrods, making it a perfect rock crawling machine. ● Wheelbase: 288mm

● Longitudinally-Mounted Motor, Shaft-Driven 4WD ● 3-Bevel Differential Gears（Locked differential also possible）● Planetary Gearbox ● Front/Rear 4-Link Rigid Suspension ● CVA Shock Units ● Gear Ratio=1:40.5 ● Type 540 Motor

Mercedes-Benz Unimog 406 Series U900

4WD

ITEM 58414 L: 435mm

Dampers are actuated via pushrods and rocker arms. Separate coil springs act as tension springs to help maintain a controllable stance.

Compact gearbox transfers power to all four wheels and its small size enables a better center of gravity.

CR-01 CHASSIS LINE-UP

Ford Bronco 1973

Toyota Land Cruiser 40

ITEM 58436 L: 435mm

ITEM 58405 L: 435mm

TRACTOR TRUCK GO TRUCKIN’

These models realistically reproduce the imposing form of European and American tractor trucks and feature a ladder frame chassis with authentic suspension, 3-speed transmission, and a coupler to enable connection with Tamiya 1/14 scale trailers.

TRACTOR TRUCK & SEMI-TRAILER LINE-UP

7

MAN TGX 18.540 4X2 XLX

SCANIA R620 6X4 Highline

King Hauler

ITEM 56329 L: 458mm

ITEM 56323 L: 520mm

ITEM 56301 L: 600mm

The Multi-Function Control Unit（MFC01）enables realistic light, sound, and vibration effects. Engine sounds have been digitally recorded from actual trucks and headlights, brake lights, and turn signal operations are all available at your fingertips.

Maersk 40-Foot Container Semi-Trailer

3-Axle Reefer Semi-Trailer

NYK 40-Foot Container Semi-Trailer

ITEM 56326 L: 917mm

ITEM 56319 L: 983mm

ITEM 56330 L: 917mm

*Tractor truck sold separately.

*Tractor truck sold separately.

*Tractor truck sold separately.

TAMIYA R/C MODELS CATALOG

TT-01 TYPE-E CHASSIS START YOUR R/C CAREER!

This shaft-driven 4WD chassis features a simple layout for effortless assembly, making it perfect for novice drivers. A wide range of Option Parts are separately available to enhance chassis performance.

4WD

● Wheelbase: 257mm/251mm ● Bathtub-Type Chassis Frame ● Longitudinally-Mounted Motor, Shaft-Driven Full-Time 4WD ● Front/Rear 3-Bevel Differentials ● 4-Wheel Double Wishbone Suspension ● Front/Rear Friction Dampers ● Gear Ratio=8.35:1 ● Type 540 Motor

See Option Parts List on P.28 3-piece steering linkage features aluminum posts for smooth operation.

Damper stay has 2 damper attachment points for setting adjustment. Fiberglassreinforced nylon upper deck provides greater chassis strength.

TT-01 TYPE-E CHASSIS LINE-UP

Sumo Power GT Nissan GT-R

Honda CR-Z

Toyota Celica LB Turbo Gr.5

Volkswagen Scirocco GT24-CNG

ITEM 58501 L: 452mm

ITEM 58494 L: 435mm

ITEM 58513 L: 457mm

ITEM 58508 L: 443mm

Audi R8 LMS-24h Nürburgring

BMW 318i STW

Honda Civic Type-R R3 J.A.S. Motorsport

Raybrig HSV-010

ITEM 58504 L: 434mm

ITEM 58516 L: 447mm

ITEM 58480 L: 423mm

ITEM 58479 L: 441mm

Nissan 370Z

Porsche 911 GT3 Team KTR

BMW M3 GT2 2009

Toyota Celica GT-Four 1990

ITEM 58478 L: 425mm

ITEM 58422 L: 465mm

ITEM 58449 L: 452mm

ITEM 58515 L: 450mm

Ford SVT F-150 Lightning

Weider HSV-010

Nissan GT-R

Volkswagen Golf GTI Cup Car

ITEM 58481 L: 463mm

ITEM 58487 L: 441mm

ITEM 58411 L: 444mm

ITEM 58410 L: 421mm

LEDs Heighten Scale Presence Some models come equipped with an LED Light Unit to depict realistic head and tail lights. A separately available LED Light Control Unit（TLU-02）enables even more precise control of a variety of LED operations.

8

TAMIYA R/C MODELS CATALOG

TA06 CHASSIS

INNOVATIVE DUAL-DRIVE 4WD

The TA06 chassis features a balanced layout which takes brushless motors and LF batteries into account. Motor and battery are positioned along the centerline while the DUAL-DRIVE system with belt-driven front and gear-driven rear wheels offers efficient power delivery.

4WD

● Wheelbase: 257mm ● Tread: 165mm ● Horizontally-Mounted Motor, Belt & Gear Driven 4WD ● Front/Rear Gear Differential Units ● 4-Wheel Double Wishbone Suspension ● CVA Shock Units

Super Mini ● Gear Ratio=7.19:1 ● Tire Width/Diameter: 24/64mm ● Type 540 Motor

See Option Parts List on P.26 Refined Inboard Front Suspension setup has been optimized for short reversible suspension arms. Gear-driven rear wheels.

Motor is positioned along the centerline of the chassis for optimum balance.

Gear diff unit settings can be fine-tuned by using oils of different viscosities.

TA06 CHASSIS LINE-UP

Outboard Front Damper Stay

This is a 1/10 scale R/C assembly kit model of the Sumo Power GT-R which competed in the 2010 FIA GT1 World Championship season.

Sumo Power GT Nissan GT-R

Standard outboard suspension setup is also possible with kit-included damper stay parts to allow a wider range of suspension settings to match track conditions.

ITEM 58488 L: 452mm

TA05 ver.II CHASSIS BELT-DRIVEN EVOLUTION

The centrally mounted motor drives equal-length front and rear drive belts in a system which provides crisp handling and optimum top speed.

This chassis’optimized balance and low center of gravity makes it an appealing choice.

4WD

● Wheelbase: 257mm ● Tread: 165mm ● Horizontally-Mounted Motor, 2-Belt Driven 4WD ● Front/Rear Ball Differentials ● 4-Wheel Double Wishbone Suspension ● CVA Shock Units Super Mini ● Gear Ratio=7.19:1 ● Tire Width/Diameter: 24/64mm ● Type 540 Motor

See Option Parts List on P.27 Front section features an IFS layout with short reversible suspension arms.

Maintenance is made easier thanks to the left and right separate suspension mounts.

One-piece aluminum motor mount with cantilever center shaft resulted in a narrower chassis design.

TA05 ver.II CHASSIS LINE-UP

9

Weider HSV-010

Raybrig HSV-010

Corolla Axio apr GT

Cusco Dunlop Subaru Impreza

ITEM 58484 L: 441mm

ITEM 58472 L: 441mm

ITEM 58448 L: 435mm

ITEM 58435 L: 453mm

TAMIYA R/C MODELS CATALOG

FF-03 CHASSIS

ENJOY FWD DRIVING EXPERIENCE The longitudinal battery layout allows for a slim chassis design, with the R/C units loaded on either side for optimum balance. The front-mounted motor, front-wheel drive setup incorporates a 4-wheel double wishbone suspension and offers a unique R/C driving experience.

FWD

● Three Adjustable Wheelbase Lengths（257mm, 245mm, 233mm） ● Bathtub-Type Chassis

Frame ● Front-Mounted Motor, Front-Wheel Drive ● Ball Differential ● 4-Wheel Double Wishbone Suspension ● CVA Shock Units Super Mini ● Gear Ratio=6.80:1 ● Tire Width/ Diameter: 24/64mm ● Type 540 Motor

See Option Parts List on P.30

Front-end features an IFS setup that enables fine suspension settings. The rocker bridge is equipped with stabilizer holders.

Three wheelbases（257mm, 245mm, 235mm）are possible by changing the rear section assembly.

FF-03 CHASSIS LINE-UP

Volkswagen Scirocco GT24-CNG

Honda CR-Z

Honda Civic Type-R R3 J.A.S. Motorsport

ITEM 58505 L: 443mm

ITEM 58490 L: 435mm

ITEM 58476 L: 423mm

Front Section The front-mounted motor provides the front wheels with an ample amount of traction.

The specially-designed compact gearbox is equipped with a ball differential for sharp handling performance.

F104 CHASSIS

WELL-BALANCED FORMULA The F104 chassis has a double deck layout, longitudinal battery position, and 3-point suspension to achieve sharp handling performance. The highly efficient Direct-Drive 2WD setup features the motor pinion directly connected to the spur gear with built-in ball differential. Several realistically reproduced race car bodies are available.

2WD

● Wheelbase: 270mm ● FRP Double Deck Frame ● Horizontally-Mounted Motor, Rear Direct-Drive 2WD ● Ball Differential

● Front Kingpin/Coil Spring and Rear T-Bar Rigid Suspension

● Gear Ratio=4.16:1

（when used with 25T pinion and 104T spur gears） ● Tire Width/Diameter（F104）: 30/64mm（Front）,

35/64mm（Rear） ● Tire Width/Diameter（F104W）: 31/56mm（Front）, 50/67mm（Rear） ● Type 540 Motor

See Option Parts List on P.29 The upper arms are connected to the uprights with ball connectors. Camber angle and ground clearance adjustments are possible.

Rear suspension features a s i m p l e T- b a r a n d f r i c t i o n p l a t e combination.

Battery pack can be detached by rotating R/C unit trays.

F104 CHASSIS LINE-UP

Vodafone McLaren Mercedes MP4-24 Team Lotus Type 79

Wolf WR1

ITEM 58475 L: 417mm

ITEM 84124 L: 463mm

ITEM 84122 L: 461mm

F104W chassis incorporates F103 front arms for a wider front tread.

10

TAMIYA R/C MODELS CATALOG

M-05 CHASSIS

NIMBLE FWD CHASSIS The lightweight, narrow semi-monocoque frame offers an optimized weight distribution and a low center of gravity. A ground-hugging 4-wheel independent double wishbone suspension and a 3-piece steering linkage ensure excellent stability during high-speed cornering.

FWD

● Three Adjustable Wheelbase Lengths（210mm, 225mm, 239mm）● Semi-Monocoque Frame

Chassis ● Front-Mounted Motor, Front-Wheel Drive ● 3-Bevel Differential Gears ● 4-Wheel Double Wishbone Suspension ● Front/Rear Friction Dampers ● Gear Ratio=5.8:1 ● Tire Width/ Diameter: 25/59mm ● Type 540 Motor

See Option Parts List on P.31 3-piece steering linkage offers precise response.

Steering servo positioned along the centerline of the chassis with the receiver and ESC on either side.

Battery holders are also compatible with LF battery packs.

M-05 CHASSIS LINE-UP

Honda Ballade Sports Mugen CR-X PRO.

MINI JCW Coupe

MINI Cooper '94 Monte Carlo

MINI Cooper Racing

ITEM 58503 L: 366mm

ITEM 58520 L: 375mm

ITEM 58483 L: 322mm

ITEM 58438 L: 315mm

Adjustable Wheelbase Lengths Three wheelbase lengths（210mm, 225mm, 239mm）are possible by simply switching the position of the rear suspension parts, enabling a wide range of body choices.

Alfa Romeo MiTo ITEM 58453 L: 383mm

M-06 CHASSIS

Rear-Mounted Motor, Rear-Wheel Drive Setup

RWD

The layout features a longitudinally-mounted battery with R/C units positioned on either side. The 4-wheel double wishbone suspension is paired with rear 60D Super Grip radial tires for improved rear traction. ● Three Possible Wheelbase Lengths（210mm, 225mm, 239mm） ● Tread（Front/Rear）: 138mm ● Bathtub-Type Chassis Frame ● Rear-Mounted Motor, Rear-Wheel Drive ● 3-Bevel Differential Gears ● 4-Wheel Double Wishbone Suspension ● Front/Rear Friction Dampers ● Gear Ratio=5.8:1 ● Tire Width/Diameter: 25/59mm ● Type 540 Motor

See Option Parts List on P.31

M-06 CHASSIS LINE-UP

Rear-mounted motor contributes to greater traction for rear wheels.

11

T h r e e w h e e l b a s e l e n g t h s（ 2 1 0 m m , 225mm, 239mm）are possible by switching the position of the rear section parts.

Alfa Romeo Giulia Sprint GTA

Mazda RX-7

ITEM 58486 L: 385mm

ITEM 58493 L: 419mm

TAMIYA R/C MODELS CATALOG

TT-01D TYPE-E CHASSIS HIT THE GROUND SLIDING

The TT-01D Type-E chassis features many drift-spec parts to enable thrilling drift driving, including Super Driftech Tires, a 4-wheel double wishbone suspension, and full ball bearings which reduce friction loss and efficiently transmit the power from the Sport-Tuned Motor.

4WD

● Wheelbase: 257mm

● Bathtub-Type Chassis Frame ● Longitudinally-Mounted Motor, Shaft-Driven Full-Time 4WD ● Front/Rear 3-Bevel Differentials ● 4-Wheel Double Wishbone Suspension ● CVA Shock Units Super Mini ● Gear Ratio=8.35:1 ● Tire Width/Diameter: 26/63mm ● Sport-Tuned Motor（25T）

See Option Parts List on P.28

4-wheel double wishbone suspension features CVA Shock Units Super Mini and adjustable upper arms.

Sport-Tuned Motor is equipped with aluminum heat sink.

Ball bearings minimize friction loss.

TT-01D TYPE-E CHASSIS LINE-UP

Endless 370Z Drift Spec

Datsun 240Z Drift Spec

Nissan GT-R Drift Spec

BMW M3 E30 SPORT EVO Drift Spec

ITEM 58474 L: 425mm

ITEM 58473 L: 451mm

ITEM 58455 L: 444mm

ITEM 58451 L: 448mm

Super Driftech Tires These resin tires enable easy drift control and great durability, and can be fitted to a wide range of 24mm-wide touring car wheels.

Lexus GS400 Drift Spec ITEM 58432 L: 459mm

KICK THE TAIL OUT! Transfer weight to the front of the car.

Maintain consistent throttle control.

Sudden inputs can throw the machine out of balance.

Release throttle for an instant, transferring weight to the front of the car while turning the steering wheel.

As the rear starts to slide, counter-steer to prevent spinning out. Use the throttle to maintain drift posture.

Use throttle and steering to control turning radius. Start returning controls to neutral position as you near the exit of the turn.

Return controls to neutral position, after the car’ s position has stabilized, accelerate gradually.

The figure eight is perfect for mastering the mixture of straights and turns that drift driving entails. Practice as often as you can, perfecting the timing of when to steer and the best throttle position for maintaining re ready, practice high speed drift posture. When you’ oval course driving and wild drift parking!

12

TAMIYA R/C MODELS CATALOG

1 16 R C TANK

REAL ARMORED ACTION In addition to forward/reverse and normal/pivot turning as well as turret rotation and gun elevation/depression, these 1/16 R/C tanks offer realistic light, sound, and vibration effects such as recoil action and digitally-recorded engine sounds. Get a taste of real armored action with these massive, dynamic models.

Limited Edition

German Tiger I Early Production Full-Option Kit（w/Detail-Up Parts） ITEM 84273 L: 530mm

The turret features full 360°rotation and gun barrel elevation and depression can During firing, the barrelbe controlled. mounted LED flashes, firing sound roars, and barrel and hull recoil movements are In addition to controlling reproduced. various movements, the DMD units enable realistic light and sound effects.

1/16 R/C TANK LINE-UP

Russian Heavy Tank KV-2 Gigant Full-Option Kit

Russian Heavy Tank KV-1 Full-Option Kit

German Panzerkampfwagen IV Ausf.J Full-Option Kit

German Tank Destroyer Jagdpanther Late Version Full-Option Kit

ITEM 56030 L: 443mm

ITEM 56028 L: 423mm

ITEM 56026 L: 445mm

ITEM 56024 L: 605mm

German Panther Type G Full-Option Kit

Leopard 2 A6 Main Battle Tank Full-Option Kit

U.S. Medium Tank M26 Pershing

M51“Super Sherman” Full-Option Kit

ITEM 56022 L: 572mm

ITEM 56020 L: 688mm

ITEM 56016 L: 536mm

ITEM 56032 L: 542mm

（T26E3）Full-Option Kit

1 35 R C TANK

TABLETOP TANK BATTLES These 1/35 scale R/C tanks feature exciting and realistic maneuverability with light and sound effects. Forward/reverse, left/ right turning, sharp turning, and pivoting, as well as turret rotation and main gun elevation/depression can be controlled. Included 2.4GHz control unit enables multiple models to safely operate in one area.

The design of the infrared LED housing is optimized for close-quarter tank battles. Light sensor unit on the cupola has a 360 degree range.

1/35 R/C TANK LINE-UP

U.S. M4A3 Sherman

（w/2.4GHz Control Unit） ITEM 48212 L: 172mm

13

German Panzerkampfwagen IV Ausf.J Russian Medium Tank T-34-85 （w/2.4GHz Control Unit）

（w/2.4GHz Control Unit） ITEM 48211 L: 200mm

ITEM 48210 L: 238mm

German Panther Type G Late Version

（w/2.4GHz Control Unit） ITEM 48209 L: 257mm

TAMIYA R/C MODELS CATALOG

EXPERT BUILT

READY-TO-RUN MODELS Tamiya's Expert Built（XB） series provides instant R/C excitement without the need for assembly. Based on our high quality R/C assembly kit products, these XB models come fully assembled and painted with all R/C units pre-installed, making them perfect for newcomers to the hobby. The XB series offers a variety of models including on-road cars, off-road buggies, pick-up trucks, and more!

XB The Hornet ITEM 57741 L: 400mm

All models are based on high-quality An assembly assembly kit products. instruction manual is also included to aid A with adjustment and maintenance. wide range of Option Parts is available for The latest XB further customization. models come with a 2.4GHz R/C system.

EXPERT BUILT LINE-UP

FM

FM

AM

FM

XB Nissan Fairlady Z Version NISMO

XB Raybrig HSV-010

XB Mitsubishi Lancer Evolution X

XB ORC Amemiya SGC-7

ITEM 57775 L: 435mm

ITEM 57811 L: 441mm

ITEM 57793 L: 443mm

ITEM 57790 L: 459mm

AM

AM

AM

2.4G

XB NISMO Coppermix Silvia Drift Spec

XB Subaru Impreza WRC 2008

XB BMW M3 GT2 2009

XB Ford Bronco 1973

ITEM 57765 L: 444mm

ITEM 57786 L: 434mm

ITEM 57799 L: 452mm

ITEM 57818 L: 422mm

2.4G

2.4G

2.4G

FM

XB Volkswagen Type 2（T1）Wheelie

XB Mitsubishi Montero Wheelie

XB Blackfoot III

XB Toyota Land Cruiser 40

ITEM 57826 L: 345mm

ITEM 57831 L: 385mm

ITEM 57825 L: 445mm

ITEM 57810 L: 426mm

FM

FM

FM

AM

XB Mercedes-Benz Unimog 406 Series U900

XB MINI JCW Coupe

XB Honda Ballade Sports Mugen CR-X PRO.

XB Plasma Edge

ITEM 57815 L: 407mm

ITEM 57829 L: 375mm

ITEM 57820 L: 366mm

ITEM 57772 L: 400mm

2.4G

2.4G

AM

FM

XB Nissan Titan

XB Fast Attack Vehicle（2011）

XB Levant

XB Super Levant

ITEM 57830 L: 413mm

ITEM 57828 L: 430mm

ITEM 57789 L: 430mm

ITEM 57796 L: 430mm

AM

FM

2.4G denote type of R/C system.

14

TAMIYA R/C MODELS CATALOG

R/C SYSTEMS 45045

45050

45055

45054

45028

45031

EXPEC GT-I 2.4G Radio Control System（Basic Set）

EXPEC GT-II 2.4G Radio Control System

Electronic Speed Controller TEU-105BK

Electronic Speed Controller TEU-106BK（for Twin Motor）

Electronic Speed Controller TEU-302BK

High Performance ESC Volac MS

42123

45047

45038

45048

45049

High Performance ESC Volac MS C3

Brushless Electronic Speed Controller 01（Sensored）

Brushless Electronic Speed Controller 01

Brushless Motor 01 10.5T & Brushless ESC 01 Set（Sensored）

Brushless Motor 01 16T & Brushless ESC 01 Set（Sensored）

BATTERIES & CHARGERS 55085

55095

55086

55094

55102

55109

Ni-Cd Battery 7.2V-1300mAh Custom Pack

Ni-Cd Battery 7.2V Racing Pack 1600SP

Ni-Cd Battery 7.2V-2400mAh Racing Pack RC2400SP Zapped

Ni-MH Battery 7.2V-3700mAh Advanced Pack 3700HV

LF Battery LF2200-6.6V Racing Pack

LF Battery LF1600-6.6V Racing Pack

55105

55112

55111

55103

LF Battery LF1100-6.6V Racing Pack（M-Size）

LF Battery LF2300-6.6V Racing Pack（Separate Type）

LF Battery LF3700-6.6V Racing Pack

LF-6.6V Battery DC Charger

TOOLS 74085

42145 Hex Wrench Screwdriver（1.5mm） 42146 Hex Wrench Screwdriver（2mm） 42147 Hex Wrench Screwdriver（2.5mm） 42148 Box Wrench（5.5mm） 42149 Box Wrench（7mm） 42150 Ballpoint Hex Wrench Screwdriver（2.5mm） 42159（+）Screwdriver M 42160（+）Screwdriver L 42161（-）Screwdriver M

R/C Tool Set（8pcs.）

Turnbuckle Wrench

54152

53861

53862

53858

Air Remover For Oil Dampers

Camber Gauge（Touring Car）

Touring Car Height & Droop Gauge

5mm Adjuster Wrench

74093

74002

74065

Modeler's Side Cutter α（Gray）

Long Nose Pliers w/Cutter

Non-Scratch Long Nose Pliers

（Super Long）

15

53602

42199

53338

Ground Clearance Gauge

RC Tire Cementing Helper

74005

74003

74089

Curved Scissors for Plastic

Angled Tweezers

Electric Screwdriver Set（PT01）

（for Off-Road Car）

TAMIYA R/C MODELS CATALOG

TRF Thoroughbreds These top-spec TRF machines were developed using race data gathered by the TRF drivers and reflect the latest racing trends. These machines offer excellent controllability and a broad range of setting possibilities. Many of their design features have also become adapted by Tamiya’ s other R/C product designs.

TRF417X CHASSIS KIT ITEM 42205

4WD

● Body, motor, pinion gear, tires, R/C units, and battery pack sold separately.

The latest iteration of the TRF417 features new lower and upper decks which improve chassis flexibility for better low-speed traction. The front and rear damper stays have an increased thickness of 3.5mm and are equipped with damper attachment slots to allow fine setting adjustment.

Limited Edition

The TRF502X features a well-balanced layout with a front-mid motor and separated battery packs installed at the rear. The highly durable chassis includes upper/lower decks and damper stays made from carbon fiber to ensure optimized performance for off-road driving.

TRF502X CHASSIS KIT ITEM 42183

4WD

● Body, rear wing, motor, pinion gear, tires,

R/C units, and battery pack sold separately.

Limited Edition

ZAHHAK BODY

TRF201(w/UPGRADE PACK & LIGHTWEIGHT BODY Ver.1）ITEM 42203 RWD ● Rear wing, tires, motor, pinion gear, R/C units, and battery pack sold separately.

Limited Edition

The TRF201 has demonstrated its superior performance at R/C 2WD buggy competitions all over the world. It is offered with one of two body styles and performance-enhancing parts such as a carbon battery plate, reinforced 52T ball differential, and lightweight heat sink motor plate.

Check Out the Latest TRF Info!

LIGHTWEIGHT BODY Ver.1

[ http://www.teamtrf.com/ ]

TRF aims to win elite R/C races such as the IFMAR ISTC World Championships and gain valuable race data and technical know-how through these racing activities.

Tamiya applies this knowledge to exciting R/C products including top-spec racing machines, entry-level models, and high-performance parts. Not only does TRF support Tamiya official races in Japan, they also actively take roles as supervisors s official website for the latest at race events around the world. Check TRF’ s activities. information about the team’

16

Over the River and Through

SUBARU IMPREZA STI TEAM ARAI ITEM 58528

4WD

Type 540 motor included. R/C system, battery pack, and charger sold separately.

This brand-new 4WD XV-01 chassis offers a dynamic R/C rally driving on both tarmac and gravel surfaces. It features a front-motor, belt-driven 4WD layout with front and rear enclosed gearboxes equipped with gear differential units. The box-like main frame incorporates covers and wheel well liners to provide superb protection against dirt and debris. The 4-wheel double wishbone suspension ensures plenty of suspension stroke and ground clearance and is matched with Rally Block Tires on 16-spoke wheels for realistic handling. The first XV-01 chassis release is the Subaru Impreza WRX STI Team Arai, which took victory at Rd.5 Rally Hokkaido during the 2011 Asia-Pacific Rally Championship.

Double wishbone suspension is equipped with CVA shock units. A long tie-rod steering system reduces bump steer during driving.

Reversible-type rear suspension features separate front suspension mounts.

Box-like main frame is equipped with covers to protect the drivetrain and R/C units from dirt and debris.

A hatch on the underside of the chassis enables quick access to the battery and R/C unit connectors.

the Woods!

Specifications ● Wheelbase: 257mm ● Front-Mounted Motor, Belt-Driven 4WD ● Front/Rear Gear Differential Units ● 4-Wheel Double Wishbone Suspension

1/10

XV-01 Chassis Option Parts

ITEM 54376

XV-01 Separate Suspension Mounts（1XJ） XV-01 Separate Suspension Mounts（1XM） XV-01 Aluminum Suspension Mount（XJ） XV-01 Slipper Clutch Set XV-01 Titanium Screw Set

ITEM 54376 ITEM 54377 ITEM 54379 ITEM 54378 ITEM 84291

XV-01 PRO CHASSIS KIT

PRO-Spec Version Also Available

XV-01 PRO Chassis Kit comes with plenty of high-spec parts as standard equipment to further bring out its performance. These include TRF dampers, front and rear universal drive shafts to minimize friction loss, a blue-anodized aluminum motor mount to increase motor attachment rigidity, as well as aluminum turnbuckles, a reinforced drive belt, and low-friction adjusters. In addition, Rally Block Tires are included to mount on the 16-spoke wheels.

Featured Components ● TRF Dampers ● Aluminum Motor Plate ● Universal Drive Shafts ● Reinforced Drive Belt ● Aluminum Turnbuckles ● Full Ball Bearings

ITEM 58526

4WD

● Body, motor, R/C system, battery pack, and charger sold separately.

Stylish blue TRF dampers, aluminum turnbuckles, aluminum motor mount, and universal drive shafts come as standard equipment.

Reinforced drive belt ensures optimum power transmission.

SUZUKI

JIMNY WHEELIE

ITEM 58531 L: 345mm

2WD

The Suzuki Jimny, a popular compact SUV which was also known as the Samurai and Katana outside of Japan, was first introduced in the early 1970 s and it still has a large fan base even today. This R/C assembly kit depicts the 2nd generation SJ30 variant of the Jimny. The distinctive form of the SUV is reproduced by a polycarbonate body which features a roll bar, spare tire, and spot lights. In addition, a driver figure is also included to enhance the model ’ s appearance. The rear-wheel drive chassis is matched with 115mm diameter tires to enable exciting stunts such as spin turns and wheels in the air driving.

The heavy duty monocoque chassis features a 4-wheel double wishbone suspension, a fully-enclosed gearbox with differential, and rear-wheel drive. Tires/wheels and the gearbox/motor come pre-assembled to enable ease of assembly.

SUPER CLOD BUSTER ITEM 58312 L: 480mm

4WD

The Super Clod Buster features massive tires, a high-lift pick-up truck body, and powerful twin-motor dual-gearbox 4WD drivetrain with a 4-wheel steering system. The injection-molded body features eye-catching metal-plated parts for the front grille, air intake, and roll bar.

BULLHEAD ITEM 58535 L: 436mm

4WD

The Bullhead features an injection-molded body that was inspired by American tractor trucks. The front grille and bumper, roll bar, air cleaners, exhaust pipes, and fuel tanks are all reproduced as metal-plated parts to provide a customized look. Twin-motor 4WD drivetrain, 4-link rigid suspension, and massive 165mm diameter tires allow you to enjoy dynamic monster truck action.

19

（RE） BORN TO BE WILD

This is a re-released version of Item 58050, the classic 2WD R/C buggy which was originally released in 1985. While maintaining the basic layout of the original, this re-released version incorporates modern improvements. Durable ABS frame chassis features 4-wheel independent trailing arm suspension. Battery case is compatible with modern power sources such as Tamiya Racing Packs and LF batteries. Driveshafts feature dogbone-type joints and dust covers.

WILD ONE OFF-ROADER ITEM 58525 L: 425mm

2WD

Aluminum oil dampers ensure excellent off-road stability.

TOYOTA 4×4 PICK-UP BRUISER (RN36)

ITEM 58519 L: 525mm

4WD

I’ LL SEE YOU OUTSIDE This electric R/C assembly kit reproduces the 4WD Toyota Hilux Pick-Up （RN36）, which enjoyed wide popularity in the US and Japan during the

1980s and is still adored by many fans today. Metal ladder frame chassis incorporates a newly-designed die-cast 3-speed transmission which drives all four wheels in 1st gear and only the rear wheels in 2nd & 3rd gears.

Front and rear axle housings are equipped with differentials which may be locked for even greater off-road performance.

20

TOYOTA 86 (TT-01 TYPE-E) ITEM 58529 L: 431mm

4WD

BRING BACK THE SPORT This is a 1/10 scale R/C model of the Toyota 86, a highly-anticipated front engine rear-wheel drive sports car. The sporty form of the Toyota 86 has been realistically reproduced by the polycarbonate body and separate parts to depict light cases enhance realism. Radial tires with realistic tread patterns and silver wheels help add to its stylish appearance. This exceptional model features the fun-to-drive TT-01 Type-E chassis.

Fiberglass-reinforced upper deck provides greater chassis strength.

3-piece steering linkage features aluminum posts for smooth operation.

TOYOTA 86 (TA06) ITEM 58530 L: 431mm

4WD

The Toyota 86 is also available on the TA06 chassis, which features a distinctive Dual-Drive 4WD system with belt-driven front and gear-driven rear wheels, 4-wheel double wishbone suspension with Inboard Front Suspension setup, and front/rear gear differential units. Medium-narrow racing radial tires are mounted on silver wheels.

21

See Option Parts List on P.28

See Option Parts List on P.26

NEW MAN JOEST RACING PORSCHE 956 (RM-01)

ITEM 58521 L: 377mm

2WD

An Exciting Development in 1/12 Scale This is a 1/12 scale R/C model of the New Man Porsche 956 from the German Joest Racing Team which won the Le Mans 24 Hours of endurance race in 1984. The RM01 chassis features a 2.5mm thick FRP lower deck and a height-adjustable gear case. The Pivot-Ball Link RearďźˆPBLRsuspension system features a center pivot ball, a pitch damper to temper chassis pitch movement, a roll damper and side links to control chassis roll, and a front independent suspension with optimized kingpin trail. This model also features its striking yellow, white, and black livery.

See Option Parts List on P.29 Front independent kingpin coil suspension features optimized kingpin trail.

Direct-Drive setup features an aluminum diff housing and steel rear shaft. Wheel hubs allow attachment of both hex-hubsecured and 3-screw-secured wheels.

Side links and coil springs control rear section movements.

The LF1100 battery and Type 380 motor provide swift performance. By removing an adapter, Type 540 motors can also be installed.

TOYOTA TOM'S 84C (RM-01) ITEM 58509 L: 358mm

2WD

Sensational Group C Racer In 1982, the World Endurance Championship introduced the new Group C class, which was initially dominated by the Porsche 956. In 1984, Toyota entered the Tom's 84C to challenge Porsche for top honors in this category and this is a 1/12 scale R/C model of that historic car. Recreate the thrilling racing action in R/C form!

22

F104 Ver.II PRO CHASSIS KIT

See Option Parts List on P.29 ITEM 58534

2WD

.

*Body, motor, tires, R/C system, and battery pack sold separately.

TAKING YOU TO THE NEXT LEVEL The Direct-Drive 2WD F104 chassis has evolved even further. This new F104 ver.II PRO chassis combines a 3mm thick carbon fiber lower deck with a pivot ball link rear suspension like the one found on the RM-01 chassis to enable more precise adjustments of the chassis' pitch and roll characteristics. Body mount plate and center upper deck with integrated damper mount are also made from carbon fiber for overall weight reduction and increased durability. It also features a newly-designed ball differential with TRF417 diff plates. ● 3mm Thick Carbon Lower Deck / Lower Brace / Body Mount Plate ● 2mm Thick Carbon Front & Rear Upper Decks ● Aluminum Diff Housing ● RM-01 Roll & Pitch Dampers ● F104 Clamp Type Wheel Hub ● F104 Aluminum Upper Suspension Mount ● F104 Low Friction Suspension Ball Set ● Aluminum Horn For Hi-Torque Servo Saver（F104） ● 93T & 104T Spur Gears ● 23T Pinion Gear ● High-Torque Servo Saver（Black） ● F1 Front Spring Set ● 3x35mm Turnbuckle Shafts（Blue） ● Full Ball Bearings

Rear section is connected to lower deck by a center pivot ball. Aluminum roll damper, side links, and coil springs control chassis roll.

Aluminum pitch damper can be replaced by a TRF damper.

FF-03R CHASSIS KIT ● Carbon Battery Plate（New） ● Battery Stopper（New） ● Battery Nut（New） ● Gear Case for Gear Differential Unit ● Gear Differential Unit ● TRF417 Universal Drive Shafts ● TRF Special Damper ● Short Reversible Suspension Arms ● TB-03 Aluminum Suspension Mount（1A, 1XD） ● FF-03 Carbon Reinforced K Parts ● FF-03 Carbon Reinforced M Parts ● TA05-IFS Carbon Reinforced F Parts ● TRF416 E Parts ● TRF416 C Parts ● Fluorine Coated Suspension Ball

ITEM 84288 FWD

. Limited Edition

*Body, motor, tires, wheels, R/C system, and battery pack sold separately.

23

● Clamp Type Aluminum Wheel Hub（5mm Thick） ● Hi-Torque Servo Saver ● Full Ball Bearings

TA05 VDF II DRIFT CHASSIS KIT A DRIFT EVOLUTION This TA05-VDF II chassis combines a 2.5mm thick carbon fiber lower deck with a single vertical frame to offer greater chassis roll flexibility and therefore more aggressive drifting. The 3-belt drivetrain incorporates a new motor bulkhead and is equipped with a combination of front ball diff and rear direct coupling. In addition, The revised parallel steering system enables a wider range of setting possibilities. Grip driving setup is also possible.

3-belt drivetrain ensures efficient power transfer and features a lower spur gear position.

the parallel geometry steering setup has been revised to enable a wide setting arrangement.

Just like its predecessor, the VDF II chassis also comes with high-end parts such as TRF dampers, universal drive shafts, and short reversible suspension arms.

● 2.5mm Thick Carbon Lower Deck ● 2.5mm Thick Upper Frame ● Front Ball Diff & Rear Direct Coupling ● TRF Special Damper ● Short Reversible Suspension Arms ● Universal Drive Shafts ● Aluminum Motor Mount ● Carbon Battery Plate ● Aluminum Turnbuckle Shafts ● Aluminum Wheel Hubs ● Hi-Torque Servo Saver（Black） ● Full Ball Bearings

ITEM 84294 L: 366mm

4WD

Limited Edition

.

*Body, motor, tires, wheels, and R/C system, and battery pack sold separately.

RACE-SPEC FWD The FF-03 chassis has been upgraded to result in this special“R”version. This chassis features new parts including a redesigned gear case to accommodate a gear differential unit and a 2mm thick carbon battery plate to increase chassis rigidity. It also comes with high-end components, including TRF dampers, TRF417 universal drive shafts, and carbon reinforced parts, to further enhance performance.

Suspension is equipped with TRF dampers, aluminum suspension mounts, and carbon reinforced suspension arms and uprights. Universal drive shafts ensure efficient power transfer.

Screws and battery nut secure battery plate and enable easy battery replacement.

See Option Parts List on P.30

24

Setting-Up and Customization

CUSTOMIZE YOUR MACHINE!

Customizing and setting up your machine is one of the enjoyable aspects of R/C models and Tamiya offers a broad range of Option & Spare Parts for these purposes. s performance.

Check out the following basic points to enhance your model’

Most Important: Tires

Tuning for Improved Cornering

Tires transmit motor power

The first step is the installation

directly to the track, hence it is

of oil dampers, such as CVA

very important to select proper

Shock Units, TRF Dampers,

tires according to the track surface

and Aeration Dampers, which

for the best performance. By

allow a wider range of settings

installing front and rear tires

through the use of different

with different characteristics,

oils and coil springs.

Many Option Parts to choose from.

your machine’ s handling performance can be changed.

Selecting A Motor Tamiya offers a range of high-performance motors, including brushless motors. Select a suitable one according to the car type and the driving conditions.

Drivetrain Efficiency The installation of ball bearings minimizes friction loss to help increase top speed and extend driving time as well. Use of lightweight aluminum propeller shafts, universal drive shafts, and low-friction drive belts is also recommended.

54391

53779

53983

54392

54393

54272

UGT-Tuned Motor（24T）

GT-Tuned Motor（25T）

Lightly-Tuned Motor（28T）

FL-Tuned Motor（30T）

Type 380 Sport-Tuned Motor

Brushless Motor 01（Sensored） 10.5T

42102

53571

53630 ∼ 53633

53440

42168

53443

Touring Car Short Spring Set

Silicone Damper Oil Soft Set

53630

53631

53632

53633

TRF Special Damper (Hard Black Coating）4pcs.

TRF Damper Set (Fluorine Coated）

TRF Damper Spring （Soft / Medium / (Short, 2pcs.） Hard / Ex. Hard）

53909

53937

54008 ∼ 54014・53910 ∼ 53912

On-Road Tuned Hard Spring Set

（Black）

54157 54013

φ5mm

Rainbow

54014

φ5mm

Rainbow・Random

53910

54008

φ5mm

φ3mm

White

White

54009

φ3mm

Red

Blue

53912

φ3mm

Orange

Tamiya LED Light Unit（TLU-01）

25

LED Light Control Unit（TLU-02）

LED Lights

53911

φ5mm

Red

54010

φ3mm

54011

φ5mm

Yellow

54012

φ5mm

Blue

1/10 Scale Touring Car Cockpit Set（Right-Hand Drive）

Basic Upgrade Parts

Suspension Parts

Transmission Parts

Tires & Wheels

TA06 CHASSIS OPTION PARTS 3

8

4

54310

1

TA06 Aluminum Racing Steering Set

54308

2

TA06 Aluminum Steering Bridge

54324

3

TA06 Carbon Damper Stay（Front）

54325

4

TA06 Carbon Damper Stay（Rear）

54064 ∼ 54074 5 54171 ∼ 54175 6 7

5

54310

2

1

6

54308

1

2

TB-03 Aluminum Suspension Mounts TA05 ver.II Separate Suspension Mounts

54305

7

TA06 Front Ball Differential Set（39T）

54302

8

TA06 Center One-Way Pulley Set（18T）

53992

54075

54307

54315

TA06 Aluminum Racing Steering Set

TA06 Aluminum Steering Bridge

TA05-IFS Aluminum Rocker Nut

TB-03 Fluorine Coated Ball Head King Pin

TA06 Titanium Screw Set

TA06 Heat Sink Motor Plate

54321

54322

54323

54316

54314

54371

TA06 Carbon Reinforced A Parts（Bulkhead）

TA06 Carbon Reinforced J Parts（Damper Stay）

TA06 Carbon Reinforced T Parts（Gear Case）

TA06 Carbon Reinforced Lower Deck

TA06 Carbon Battery Hatch

TA06 Aluminum Rocker Arm Set

54373

54401

54313

54370

54324

54325

6

3

4

*Image shows CG illustration

TA06 Carbon Damper Stay

TA06 Aluminum Rear Stiffeners

TA06 Chassis Ballast Weight

TA06 Aluminum Rocker Arm Set

TA06 IFS Aluminum Rocker Arm Bridge

54309

51333

51332

54031

53917

53851

TA06 Stabilizer Set（F & R）

TRF416 E Parts（Rear Upright）

TRF416 C Parts（Front Upright）

TA05-IFS Carbon Reinforced ） F Parts（Hub Carrier 4°

2.6mm Dia. Titanium Coated Suspension Shaft Set

46mm Titanium Coated Suspension Shafts（2pcs.）

54064 ∼ 54074

54306

TA06 Rear Ball Differential Set

（52T）

54171∼ 54175

5

*Image shows Item 54064

（Front）

54064 54065 54066 54067 54068 54069 54070 54071 54072 54073 54074

TB-03 Suspension Mount 1XD TB-03 Suspension Mount 1XC TB-03 Suspension Mount 1XB TB-03 Suspension Mount 1XA TB-03 Suspension Mount 1X TB-03 Suspension Mount 1A TB-03 Suspension Mount 1B TB-03 Suspension Mount 1C TB-03 Suspension Mount 1D TB-03 Suspension Mount 1E TB-03 Suspension Mount 1F

54305 54171 54172 54173

7

54171

TA05 ver.II Separate Sus Mounts（1X） 54172

TA05 ver.II Separate Sus Mounts（1A-1XA） 54173

TA05 ver.II Separate Sus Mounts（1B-1XB）

54174

54174

54175

54175

TA05 ver.II Separate Sus Mounts（1C-1XC） TA05 ver.II Separate Sus Mounts（1D-1XD）

TA06 Front Ball Differential Set

（39T）

54304

54372

54303

TA06 Front Direct Coupling

TA06 Rear Direct Coupling（52T）

TA06 Front One-Way Set（39T）

（39T）

TA06 Carbon Damper Stay

（Rear）

54399

TA06 Rear One-Way Pulley Set

（18T）

54302

8

TA06 Center One-Way Pulley Set

（18T）

26

TA06 CHASSIS OPTION PARTS

Basic Upgrade Parts

Suspension Parts

Transmission Parts

Tires & Wheels

54311

51444

51445

53724

42216

54363

TA06 Cross Shaft For Gear Differential Unit

TRF417 Cross Joint Set

TRF417 Wheel Axle（2pcs.）

TB Evolution IV 46mm Lightweight Swing Shaft

44mm Double Cardan Joint Shaft（2pcs.）

TB Evo IV 46mm Lightweight Rear Swing Shaft

TA05 CHASSIS OPTION PARTS 2

3

5

8

54231

1

6

7

4

54019

2

3

1

TA05 ver.II Carbon Reinforced Chassis

54019

2

TA05-IFS Aluminum Bulkhead

53993

3

TA05-IFS Aluminum Rocker Arm Set

53905

4

TA05 Aluminum Side Brace

54197

5

TA05 ver.II Aluminum Motor Mount Set

53884

6

TA05 Carbon Battery Plate Set

53994

7

TA05-IFS Carbon Damper Stay（Rear）

54171 ∼ 54175 8

1

53993

54231

53992

54095

TB-03 Aluminum Racing Steering Set

TA05 ver.II Carbon Reinforced Chassis

TA05-IFS Aluminum Bulkhead

TA05-IFS Aluminum Rocker Arm Set

TA05-IFS Aluminum Rocker Nut

54091

53905

53837

54197

TB-03 Aluminum Servo Stay

TA05 Aluminum Side Brace

Aluminum Motor Heat Sink

53916

53842

53884

TA05 Aluminum Stabilizer Holder

TA05 Stabilizer Set（F & R）

53994

53928

（Left）

7

4

TA05 ver.II Aluminum Motor Mount Set

Aluminum Suspension Mount Spacer（0.5mm/4pcs.）

Aluminum Suspension Mount Spacer（1mm/4pcs.）

54196

53894

53991

TA05 Carbon Battery Plate Set

TA05 ver.II Carbon Reinforced K Parts（Stiffener）

TA05 Carbon Reinforced A Parts（Bulkhead）

TA05-IFS Carbon Reinforced N Parts

53917

54171∼ 54175

6

53851

8

54173

TRF416 C Parts（Front Upright）

27

TB-03 Aluminum Servo Stay

（Right）

53933

54172

51332

54090

53932

5

54171

TA05-IFS Carbon Damper Stay （Rear）

TA05 ver.II Separate Suspension Mounts

54171

TA05 ver.II Separate Sus Mounts（1X） 54172

TA05 ver.II Separate Sus Mounts（1A-1XA） 54173

TA05 ver.II Separate Sus Mounts（1B-1XB）

54174

54174

54175

54175

TA05 ver.II Separate Sus Mounts（1C-1XC） TA05 ver.II Separate Sus Mounts（1D-1XD）

46mm Titanium Coated Suspension Shafts（2pcs.）

Short Reversible Suspension Arm

2.6mm Dia. Titanium Coated Suspension Shaft Set

54137

54031

42216

53500

54076

TB-03D Aluminum Rear Upright

TA05-IFS Carbon Reinforced ） F Parts（Hub Carrier 4°

44mm Double Cardan Joint Shaft（2pcs.）

Cross Joints For Assembly Universal Shaft Set

TB-03 Wheel Axles for Assembly Universal Shaft

（1° ）

TA05 CHASSIS OPTION PARTS

Basic Upgrade Parts

53857

53952

04 Module GP Spur Gear 105T

53919

53849

TA05 Aluminum Differential Joint

TA05 High Precision Diff Joint

51092

53724

TB Evo IV 46mm Swing Shafts

TB Evo IV 46mm Lightweight Rear Swing Shaft

53877

Suspension Parts

Transmission Parts

54170

53833

Center One-Way Set for Porsche Type 934

TA05 Ver.II Low Friction Drive Belt（342mm）

TA05 Front One-Way Unit

54023

53989

54312

DB01 Front One-Way Pulley

Center Pulley（18T）

TA05 Gear Differential Unit

*Use with Item 53989

（TA05）

Tires & Wheels

*Use with Item 54023

*Use with Item 54023

TA05 Front Direct Coupling

（37T）

TT-01 CHASSIS OPTION PARTS 3

1

7

6

2

5

54025

54058

TT-01 Type-E Ball Bearing Set

4

8

53058

1

TT-01 Type-E Racing Steering Set

53664

2

TT-01 Aluminum Motor Heat Sink

53694

3

TT-01 Stabilizer Set（Front）

53674

4

Adjustable Upper Arm Set（TT-01/TGS）

54026

5

TT-01 Aluminum Propeller Joint & Shaft Set

53663

6

Ball Differential Set（TT-01/TGS）

53792

7

Assembly Universal Shaft（TT-01/TA04）

53506

8

39mm Lightweight Rear Swing Shaft for Assembly Universal Shaft Set

53864

53662

53682

53664

TT-01 Type-E Racing Steering Set

TT-01 Aluminum Steering Link

TT-01 Turnbuckle Tie-Rod Set

Aluminum Bumper Stopper (TT-01/TGS）

TT-01 Aluminum Motor Heat Sink

53683

53694

53800

53673

53674

53665

Urethane Bumper M / Blue (TT-01/TGS）

TT-01 Stabilizer Set（Front）

Toe-In Rear Upright

Adjustable Upper Arm Set (TT-01/TGS）

TT-01 Spur Gear Set（55T/58T）

54026

53671

53663

53792

53506

53569

TT-01 Aluminum Propeller Joint & Shaft Set

TT-01 Front One-Way Unit

Ball Differential Set (TT-01/TGS）

Assembly Universal Shaft (TT-01/TA04）

39mm Lightweight Rear Swing Shaft for Assembly Universal Shaft Set

Clamp Type Aluminum Wheel Hub（6mm Thick）

53293

53294

53156

53914

53959

53960

Reinforced Slicks Type-A (1 Pair）

Reinforced Slicks Type-B (1 Pair）

Hard Inner Sponge Set

White Dish Wheel 4pcs.

(26mm Width, Offset 0）

Metal Plated Mesh Wheel w/Drift Tire Type D 2pcs.

(26mm Offset+2）

5

1

3

*Use with Item 51217

Aluminum Toe-In Rear Uprights

（TT-01/TGS）

6

（TT-01/TGS）

7

4

8

2

（4WD/FWD Touring & Rally Car）

6-Spoke Metal Plated Wheel w/Drift Tire Type D 2pcs.

（26mm Offset+2）

ON ROAD MODELS

*Use with Item 53792

28

RM-01 CHASSIS OPTION PARTS

Basic Upgrade Parts

Suspension Parts

Transmission Parts

Tires & Wheels

RM-01 CHASSIS OPTION PARTS 1

2

3

4

7

5

54337

54341

RM-01 Aluminum Damper V Parts（Damper End, 2pcs.）

54364

5

8

6

54341

1

RM-01 Aluminum Pitch Damper Set

54351

2

RM-01 Carbon Damper Mount Plate

54354

3

RM-01 Aluminum Type 380 Motor Adapter (Blue)

54356

4

RM-01 Aluminum Motor Mount

54364

5

RM-01 Carbon Lower Deck

54365

6

RM-01 Carbon Lower Brace

54375

7

RM-01 Carbon Motor Mount Rear Plate Set

54353

8

RM-01 Carbon Rear Body Mount Plate Set

54342

54351

RM-01 Aluminum Pitch Damper Set

RM-01 Aluminum Roll Damper Set

RM-01 Carbon Damper Mount Plate

RM-01 Aluminum Type 380 Motor Adapter（Blue）

RM-01 Aluminum Motor Mount

54365

54375

54369

54355

54359

1

6

7

54354

2

54356

3

4

RM-01 Carbon Lower Deck

RM-01 Carbon Lower Brace

RM-01 Carbon Motor Mount Rear Plate Set

Aluminum Horn For Hi-Torque Servo Saver（RM-01 Chassis）

RM-01 3x31mm Titanium Coated King Pin（2pcs.）

RM-01 Pitch Spring Set

54352

54353

54366

54367

54334

54335

RM-01 Roll Spring Set

RM-01 Carbon Rear Body Mount Plate Set

8

*For use with inch-sized wheels

RM-01 Front Upright Shaft (for 1/8×5/16 Inch Bearing）

RM-01 Rear Tread Spacer Set

RM-01 High-Grip Sponge Tires

RM-01 High-Grip Sponge Tires

（Front）

（Rear）

F104 ver.II & F104 CHASSIS OPTION PARTS 3

2

8

4

5

1

54330

6 *

54166

*

7

54163

*

54164

54203

1

F104 Aluminum Servo Mount (L/R)

54160

2

F104 Titanium Coated King Pin (2pcs.)

54357

3

F104 Adjustable Metal Upright Set

54356

4

RM-01 Aluminum Motor Mount

54375

5

RM-01 Carbon Motor Mount Rear Plate Set

54359

6

RM-01 Pitch Spring Set

54352

7

RM-01 Roll Spring Set

54351

8

RM-01 Carbon Damper Mount Plate

*

54278

*

54333

*Use with Item 54331（except F104X1）

F104 Carbon Reinforced C Parts（Gear Case）

29

F104 Aluminum Motor Mount （Right & Left）

F104 Carbon Lower Deck

F104 Carbon Upper Deck

F104 Separate-Type Upper Deck Set

F104X1 Long Upper Deck

*

F104 CHASSIS OPTION PARTS 54159

Basic Upgrade Parts

*

54200

2

Aluminum Horn for Hi-Torque Servo Saver（F104）

F104 Aluminum Body Mount Set

*

54331

1

F104 Aluminum Servo Mount (L/R）

*

54169

54203

*

54281

Suspension Parts

Transmission Parts

Tires & Wheels

53901

54202

54332

TRF Special Damper（F103GT）

F104 Aluminum Upper Suspension Mount

F104 Rear Shaft Counterweight

*

54165

*

54222

54161

F104X1 Upper Deck & Roll Damper Set

F104 Aluminum Pivot Post

F104 Heavyweight Pivot Post

F104 Soft T-Bar

F104 High-Traction T-Bar

F104 Low Friction Suspension Ball Set

54154

54160

54158

54240

54162

54357

F104 Aluminum Diff Housing Set

F104 Clamp Type Wheel Hub

F104 Carbon Rear Shaft

F104 Adjustable Metal Upright Set

F103 Carbon Reinforced Front Upright

Only for F104 ver.II

54337

RM-01 Aluminum Damper V Parts（Damper End, 2pcs.）

2

F104 Titanium Coated King Pin

（2pcs.）

54356

4

Only for F104 ver.II

RM-01 Aluminum Motor Mount

54375

Only for F104 ver.II

5

RM-01 Carbon Motor Mount Rear Plate Set

54359

6

Only for F104 ver.II

RM-01 Pitch Spring Set

54352

7

Only for F104 ver.II

54351

RM-01 Roll Spring Set

3

8

Only for F104 ver.II

RM-01 Carbon Damper Mount Plate

*Not compatible with F104 ver.II

FF-03 CHASSIS OPTION PARTS 2

8

3

54288

6

1

6

7

5

4

53884

1

TA05 Carbon Battery Plate Set

54233

2

FF-03 Aluminum Diff Joint Set

54259

3

FF-03 Carbon Motor Stay（L）

54264

4

FF-03 Carbon Stiffeners（Rear）

54137

5

） TB-03D Aluminum Rear Upright（1°

54230

6

FF-03 Stabilizer Set（Front & Rear）

54233

7

FF-03 Aluminum Diff Joint Set

54234

8

FF-03 Aluminum Spur Gear Mount

54096

54289

54290

54297

FF-03 Carbon Reinforced A Parts（Gear Case）

FF-03 Carbon Reinforced K Parts（Stiffener）

FF-03 Carbon Reinforced M Parts（Damper Stay）

FF-03 Carbon Reinforced Lower Deck

53993

53992

53924

53884

TA05-IFS Aluminum Rocker Arm Set

TA05-IFS Aluminum Rocker Nut

DF-03 Heat Sink Bar Set

TA05 Carbon Battery Plate Set

54091

*For FF-03R, use with ball diff

1

TB-03 Aluminum Servo Stay（R）

（For Transponder Stay）

54223

2

FF-03 Aluminum Motor Plate

（Blue）

TB-03 Aluminum Servo Stay

（Left）

54235

FF-03 Aluminum Racing Steering Set

30

FF-03 CHASSIS OPTION PARTS 54259

3

FF-03 Carbon Motor Stay（L）

Basic Upgrade Parts

54261

54264

54258

FF-03 Carbon Steering Link

FF-03 Carbon Stiffeners（Rear）

4

54234

FF-03 Aluminum Spur Gear Mount

FF-03 04 Module Spur Gear

54233

FF-03 Stabilizer Set (Front & Rear）

TB-03 Wheel Axles for Assembly Universal Shaft

TA05-IFS Carbon Reinforced ） F Parts（Hub Carrier 4°

54228・54229

54368

54344

42222

Fluorine Coated 06 Module

FF-03 Aluminum Counter Gear Shaft

TA06 Lightweight Idler Shaft

Pinion Gear（26T･27T）54228 / （28T･29T）54229

（102T）

54031

5

54076

TB-03 Suspension Mount 1XD TB-03 Suspension Mount 1XC TB-03 Suspension Mount 1XB TB-03 Suspension Mount 1XA TB-03 Suspension Mount 1X TB-03 Suspension Mount 1A TB-03 Suspension Mount 1B TB-03 Suspension Mount 1C TB-03 Suspension Mount 1D TB-03 Suspension Mount 1E TB-03 Suspension Mount 1F

54227

8

Tires & Wheels

TA05-IFS Carbon Reinforced ） F Parts（Hub Carrier 4°

FF-03 Carbon Damper Stay

（Rear）

54230

※ Image shows Item 54064

54137

Transmission Parts

TB-03D Aluminum Rear Upright

54064 ∼ 54074 54064 54065 54066 54067 54068 54069 54070 54071 54072 54073 54074

Suspension Parts

（1° ）

6

7

FF-03 Lightweight Counter Gear

（20T）

M-05 & M-06 CHASSIS OPTION PARTS 2

4

1

3

11

M-05

6

5

12

8

1

M-05 Aluminum Racing Steering Set

54191

7

M-05 Aluminum Racing Steering Set

54192

2

M-05 Aluminum Steering Link

54268

8

M-06 Aluminum Motor Mount

54195

3

M-05 Aluminum Turnbuckle Steering Rod

54269

9

M-06 Aluminum Gearbox Plate

54184

4

M-05 Aluminum Motor Plate

54270

10

M-06 Aluminum Servo Mount

54000

5

M-Chassis Aluminum Damper Set（4pcs.）

54000

11

M-Chassis Aluminum Damper Set（4pcs.）

54194

6

M-05 Ball Differential Set

54194

12

M-05 Ball Differential Set

54180

54271 12

1

6 1 33 6

Only for M-05

54224

4

1

7

2

2

10

2

13

3

42

2

M-05 Ball Bearing Set

M-05 Titanium Screw Set

M-06 Titanium Screw Set

M-05 Lightweight Aluminum Battery Holder

54192

54193

54195

54184

M-05 Aluminum Steering Post

M-05 Aluminum Turnbuckle Steering Rod

2

M-05 Aluminum Steering Link

3

4

Only for M-05

M-05 Aluminum Motor Plate

9

M-06

7

54191

54179

31

10

54270

54191

M-06 Aluminum Servo Mount

M-05 Aluminum Racing Steering Set

54268

8

Only for M-06

M-06 Aluminum Motor Mount

54269

1

9

7

Only for M-06

M-06 Aluminum Gearbox Plate

M-05 & M-06 CHASSIS OPTION PARTS Only for M-06

54301

M-06 Carbon Battery Holder

M-05 Stabilizer Set (Front & Rear）

Only for M-05

54320

M-05 Carbon Damper Stay

（Front）

54361

Suspension Parts

Transmission Parts

Tires & Wheels

54362

54295

M-06 Carbon Damper Stay

M-06 Stabilizer Set (Front & Rear）

54177

54327

54267

M-06 Carbon Damper Stay

（Front）

（Rear）

Only for M-06

54296

54000

M-06 PRO 3x34mm Titanium Coated Suspension Ball Shaft

M-Chassis Aluminum Damper Set（4pcs.）

M-05 Aluminum Front Upright *Not compatible with M-05Ra

M-05 & M-06 Aluminum Rear ） Upright（1.0°

M-05 & M-06 Aluminum Rear ） Upright（2.0°

54212

54213

54319

54183

（2pcs.） Only for M-05

54236

Only for M-06

54326

M-06 Rear Aluminum Damper Stay Mount

Only for M-05

54239

Basic Upgrade Parts

Only for M-05

54182

5 11

M-05 Front Aluminum Damper Stay（Blue）

M-05 Adjustable Upper Arm Set

M-Chassis 3x37mm Titanium Coated Suspension Shafts（2pcs.）

M-Chassis 3x48.5mm Titanium Coated Suspension Shafts（2pcs.）

M-Chassis Lightweight Hollow Shaft Set

M-Chassis Reinforced Freewheel Axle Set

54343

54238

54194

53597

54277

54216

M-Chassis Lightweight Freewheel Axle

M-05Ra Reinforced Ball Differential Joint Set

M-05 Ball Differential Set

M03 Assembly Universal Shaft Set

M-Chassis Reinforced Gear Set

60D Reinforced Tires Type-B (1 Pair）

6 12

DB01 & DB02 CHASSIS OPTION PARTS 4

1

2

DB01

54149

3

5

7

11

10

6

8

12

DB02

9

54149

1

DB01 Aluminum Racing Steering Set（Blue）

54348

7

DB02 Carbon Reinforced M & N Parts（Damper Stay / Sus. Mount）

54079

2

DB01 Aluminum Motor Mount（Blue）

54350

8

DB02 Carbon Reinforced Lower Deck

54028

3

Buggy Aeration Oil Filled Damper Set

54407

9

DB02 Carbon Rear Stiffeners（2pcs.）

53961

4

） TRF501X Aluminum Caster Block（10°

54402

10

DB02 Aluminum Steering Bridge

53962

5

TRF501X Aluminum Rear Upright

54403

11

DB02 Aluminum Motor Mount

54061

6

DB01 Double Slipper Clutch Set

54336

12

DB02 Slipper Clutch Set

1

DB01 Aluminum Racing Steering Set（Blue）

54040

Can be used with DB02

DB01 Motor Heat Sink

53972

TRF501X Aluminum Steering Bridge

54079

2

DB01 Aluminum Motor Mount

（Blue）

53884

54041

TA05 Carbon Battery Plate Set

DB01 Carbon Reinforced Chassis

*Innermost holes cannot be used for DB01

32

DB01 & DB02 CHASSIS OPTION PARTS 54028

3

Can be used with DB02

Basic Upgrade Parts

54385

54037

54038

DB01 Aluminum Suspension Mount（Front）

DB01 Aluminum Suspension Mount（Rear）

Suspension Parts

Transmission Parts

54386

Tires & Wheels

54387・54388

*Image shows Item 54387

Buggy Aeration Oil Filled Damper Set

DB01 Carbon Damper Stay

DB01 Carbon Damper Stay

（Front）

（Rear）

*Can also be used with DF-03

53961

Can be used with DB02

Can be used with DB02

53963

TRF501X Aluminum Rear Upright

DB01 Aluminum Suspension Block（2pcs.）

TRF501X Stabilizer Set

54017

54061

54051

54016

DB01 Front One-Way Set

DB01 Double Slipper Clutch Set

TRF501X Aluminum Caster Block

（10° ）

53962

Can be used with DB02

54039

4

5

54387 2.6x27mm（54388 3x48.5mm） Titanium Coated Suspension Shaft （for DB01 & DB02 / 2pcs.）

54329

54018

DB01 Gear Differential Unit

DB01 Slipper Clutch Set

*Use with Item 54015

Only for DB02

54345

DB02 Carbon Reinforced A Parts

（Gear Case）

54407

9

Only for DB02

6

Only for DB02

54346

DB02 Carbon Reinforced K Parts

（Upper Arm Mount）

54402

10

Only for DB02

DB01 Aluminum Center One-Way Pulley（18T）

Only for DB02

54347

DB02 Carbon Reinforced L Parts

（Upper Deck）

54403

11

Only for DB02

Can be used with DB02

DB01 Assembly Universal Shaft

（Rear）

54348

Can be used with DB02

DB01 Assembly Universal Shaft

（Front）

7

Only for DB02

DB02 Carbon Reinforced M & N Parts (Damper Stay / Sus. Mount）

54336

54015

12

Only for DB02

54349

DB02 Carbon Reinforced S Parts

（Rear Gear Case）

Only for DB02

54404

Only for DB02

Can be used with DB02

54406

Wide Tread Hex Hubs (DB01 & DB02）

54350

8

Only for DB02

DB02 Carbon Reinforced Lower Deck

Only for DB02

54389

*Image shows CG illustration

DB02 Carbon Rear Stiffeners （2pcs.）

DB02 Aluminum Steering Bridge

DB02 Aluminum Motor Mount

DB02 Slipper Clutch Set

DB02 Aluminum Universal Propeller Shaft

DB02 Reinforced Cup Joint

TRF201 & DN-01 CHASSIS OPTION PARTS 6

3

54263

1

TRF201 High-Traction Lower Deck

2

54276

2

TRF201 Aluminum Motor Plate

54221

3

TRF201 Front Spring Set

54265

4

TRF201 Reinforced F Parts（Front Suspension Arm）

54242

5

TRF201 Aluminum Rear Suspension Mount（3.0, Front）

54246

6

） TRF201 Aluminum Rear Upright（1.0°

54262

7

TRF201 Reinforced 52T Ball Differential Gear Set

54188

8

Dual Block Tires C（Rear, 62/35）

5

4

1

33

7

8

54210

54211

54263

TRF201 Body Ver.1

TRF201 Rear Wing Set

TRF201 High-Traction Lower Deck

1

54220

54225

54276

TRF201 Front Axle (For 3/16”x 3/8”Bearings）

TRF201 Lightweight Heat Sink Motor Plate

TRF201 Aluminum Motor Plate

2

TRF201 & DN-01 CHASSIS OPTION PARTS 54028

54221

Buggy Aeration Oil Filled Damper Set

TRF201 Front Spring Set

Basic Upgrade Parts

53975

3

*Use with Item 54028

54265

4

Suspension Parts

Transmission Parts

Tires & Wheels

54244

54241

TRF201 D Parts (25°Hub Carrier）

TRF201 3x35mm Titanium Coated Suspension Shaft（2pcs.）

*Use with Item 54028

TRF501X Setting Spring Set

（Rear）

TRF201 Reinforced F Parts

（Front Suspension Arm）

*Can also be used with DF-03

54242

5

54254・54245・54246

54243・54291・54292

54405

6

54243

54254

TRF201 Aluminum Rear Suspension Mount（3.0, Rear）

TRF201 Aluminum ） Rear Upright（0°

54291

54245

TRF201 Aluminum Rear Suspension Mount（XA）

TRF201 Aluminum ） Rear Upright（0.5°

54292

54246

TRF201 Aluminum Rear Suspension Mount（XB）

TRF201 Aluminum ） Rear Upright（1.0°

TRF201 Aluminum Rear Suspension Mount（3.0, Front）

*Image shows Item 54243

54217

54219

54260

54262

48 Pitch Pinion Gear（22T, 23T）

TRF201 48 Pitch Spur Gear（77T）

DN-01 Slipper Clutch Set

*Image shows CG illustration

Adapters for TRF201 Aluminum Uprights

*Image shows Item 54245

54187

54188

TRF201 Reinforced 52T Ball Differential Gear Set

Dual Block Tires C (4WD/Front, 62/25）

Dual Block Tires C（Rear, 62/35）

42201

42164

42214

42137

Glass Tape

TRF Sticker C

Damper X-Rings (50 Durometer / 8pcs.）

Damper X-Rings (70 Durometer / 8pcs.）

7

8

TRF PARTS 42101

RC Pit Bag（Large）

42166

Aeration Damper Pistons

（Blank/4pcs.）

（15mm x 50m / Blue）

42193

42194

42128

42129

42130

42169

Tungsten Thrust Bearing Ball

3/32 Inch Ceramic Differential Ball（12pcs.）

VG Joint & Cup Grease

VG Damper Grease

VG Thrust Bearing Grease

VG Ball Diff Grease

42170

42172

42173 ∼ 42180

（8pcs.）

42173 42174 42175 42176 42177 42178 42179 42180

VG Damper Oil #25 VG Damper Oil #30 VG Damper Oil #35 VG Damper Oil #40 VG Damper Oil #45 VG Damper Oil #50 VG Damper Oil #55 VG Damper Oil #60

42206 ∼ 42211

42206 42207 42208 42209 42210 42211

VG Gear Differential Oil #600 VG Gear Differential Oil #800 VG Gear Differential Oil #1000 VG Gear Differential Oil #1200 VG Gear Differential Oil #1600 VG Gear Differential Oil #2000

VG Diff Plate Grease

VG Bearing Oil

※ Image shows Item 42173

42212

42192

42168

42216

42118

42111

VG Gear Differential Grease

VG Bearing Oil

Touring Car Short Spring Set

44mm Double Cardan Joint Shaft（2pcs.）

3x32mm Blue Titanium Turnbuckle Shaft（2pcs.）

850 Ball Bearing（Fluorine Sealed）2pcs.

（Black）

※ Image shows Item 42206

34

● Images show prototypes and may differ from final product ● This publication is current as of June 2012 ● Specifications and availability are subject to change without notice

©2012 TAMIYA PRINTED IN JAPAN 1206CH