Adding Mass to Building 3

7. Copy the column of Building 1 onto Building 2. The column component will need to be copied from the

Building 1 instance into the Building 2 instance.

Rotate the component so that it is parallel to the

Building 2 face. Array-divide the component (4/) along the Building 2 face. 8. Return to Building 1 and Push/Pull the second vertical face down from the roof, inward 6˝ on all sides.

Repeat this step for Building 2.

Adding Mass to Building 3

This tutorial adds mass to Building 3. Building 3 will have some additional detail added in comparison to the previous buildings. As with previous buildings, the detail should be added to the side of the building facing the plaza. 1. Copy the roof downward 1´ and 9´-6˝ along the vertical axes. The second copied edge indicates the split between the first and second floors. Draw an edge dissecting the length of the roof from midpoint to midpoint.

2. Push/Pull the two lower building faces 1´ inward. Push/Pull the lower front face of the building 5´ inward. Raise the roof edge drafted in step one 8´ in height to create a sloped roof.

3. On the corner ledge of the building arcade, draw a 1´ × 2´ rectangle. Convert it into a component called Column 2.

Push/Pull it downward toward the ground to add volume. 4. Copy the column to the opposite edge endpoint of the building length. Array-divide the columns (9/).