06
CHARGING AND ... INNOVATIVE PRODUCT DESIGN
2020.9-2021... Group design work Group: Concept ,Research, Material purchase My role: Product designer(1 charge pal / 4), communicate with the 3D printing factory
This is an entrepreneurial project for college students. Looking at the huge market of electronic peripheral products, we have designed a series of innovative charge pals, hoping to successfully put them into the market, and gain commercial interests.
23
DESIGN 2- Charge pal + measurement
DESIGN 3- Charge pal + ll light
DESIGN 4- Charge pal + pen box
Power indicator light
Fill light
General lighting
As the popularization of the live broadcast industry, we designed this charge pal which can ll light conveniently during video shooting
Design for designers
Sensitivity to scale is very important for designers, and this charge pal can subtly enhance designers' understanding of the concept of size
25
MODELING
PHOTOGRAPHY
TESTING＆ REFINEMENT
Further planning- crowdfounding
making process
DESIGN 1-Charge pal + pen holder
3D printing
polish
Spray paint
We used 3D printing technology to make the full-scale model. We hope to realize the installation attempt of the internal structure through the model, so as to nd the problems in the design and improve the product. Due to nancial reasons, we have only made models of two charge pals.
DESIGN 2-Charge pal + measurement
The internal parts of the model are not stable, so the structure of xed battery and circuit board should be added inside the charge pal . There is no problem with the size of the charge pal and the details of the position of the charging hole.
crowdfounding platform:
Support crowdfunding with ideas No startup capital required
5*18650 2000mAh 3.7V-U Cell Capacity:10000mAh(3.7V)
No platform restrictions Rated energy:37Wh
Initiate the crowdfounding
Initiator’s proposal
project review
preparation
initiate project
3*18650 2000mAh 3.7V-U Cell Capacity:6000mAh(3.7V)
Rated energy:22.2Wh
Progress chart project online
26