Winch C2074
Technical Data Sheet
The C2074 winch is specially designed for wire camera applications. Two lines - each capable of carrying the entire load and each monitored by an individual load cell - provide for complete safety by monitored redundancy. Double lines also allow for parallel rigging enabling simpler systems for dolly stabilization. The winches are zero fleet and can be mounted in any position. There is no need for long distances from the winch to the first pulley. Any number of winches can be combined with a C2075 winch to carry fiber optics and power to the camera so as to create complete 3d vector rigs of any type.
Standard features • Working load 200 kg • Zero fleet with one pulley per line • Adjustable output pulley • Any mounting position • Grooved for 2 x 4 mm rope (ropes) • Stroke up to 160 m • Speeds up to 10 m/s. Higher speeds on request • Dual brakes on output shaft • Direct drive synchronous motor • Dual encoders • Dual load cells on each rope • Weight approx. 400 kg • Size 230 x 55 x 60 cm • Installation by standard 50 mm couplers Model number
C2074 - a - 200 - 10 - 160 - 4 - xx
Generation Options x L2 = Second line Rated load 200 kg Rope size 70 kg 4 mm Rated speed Stroke 10 meters/second 160 meters
Possible combinations C2074 - x - 200 - 10 - 160 - 4 - L2 C2074 - x - 70 - 10 - 160 - 4 - L2 Revision 2017:1
Suitable drive cabinets D256 - x - 25 - xxx - xxx - xx for 3 m/s2 at full load D253 - x - 10 - xxx - xxx - xx for 2 m/s2 at full load Visual act Scandinavia AB. Copyright 2017.