Traktoren_Techn. Details_ab 2006 by Walker Vertriebs AG

2006

PRODUCT SPECIFICATIONS

2006 Product Specifications TABLE OF CONTENTS

PAGE

Legacy XL/2027/2927 Series Garden Tractor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-18 Product Specifications for Legacy/2027/2927 Series 2-8 Mower Deck Specifications for 48", 54" and 60" Mowers 9 Front-End Loader and Backhoe Specifications 10-11 47" Two-Stage & 46” Single-Stage Snowthrower Specifications 12 3-Point Hitch Specifications 13 50" Tiller Specifications 13 Rear 540 RPM Gearbox/PTO Specifications 14 Triple Collector Specifications 14 60" Dozer/Snow Blade Specifications 14 Box Scraper/Scarifier Specifications 14 540 PTO Driven Post Hole Digger w/6" Auger 14 60" Rear Scraper Blade 14 60" Rotary Broom 15 Cab Specifications 15 ROPS Specifications 16 Quick-Tach Weight System 16 Light Kit 16 Attachment Back-fit Information 17 Attachment Up-fit Information 18 Prestige/1800/2800 Series Garden Tractor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-26 Conquest/1700/2700 Series Yard Tractor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-34 Attachment Back-fit information 35 Attachment Up-fit Information 36 Broadmoor/1600/2600 Series Lawn Tractor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37-44 Attachment Back-fit Information 45 Attachment Up-fit Information 46 New Regent/500/2500 Series Lawn Tractor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47-54 Attachment Back-fit Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Coronet/2400 Series Riding Mower Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56-58 Javelin Zero Turn (ZT) Series Riding Mower Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59-60 Champion Zero Turn (ZT) Series Riding Mower Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61-62 Citation Zero Turn (ZT) Series Riding Mower Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63-65 Cobalt Zero Turn (ZT) Series Riding Mower Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66-68 Pacer Wide Area Walker Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69-70 Utility Vehicle Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71-72 Leaf Blower Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Leaf Vacuum Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 Rear Tine Walk-Behind Tiller 6061RT, 7016RT Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 13hp & 15hp Field & Brush Mower Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 8/14, 55/14 Chipper Shredder Series Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Snowthrower Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78-86 319M & 319E Single Stage Snowthrower Specifications 78 520M & 520E Single-Stage Snowthrower Specifications 79 7555M & 8560E Intermediate Two-Stage Snowthrower Specifications 80-81 9560E, 10560E, 11570E, 1380E, 1390E Large Frame Two-Stage Snowthrower Specifications 82-85 36”, 42”, 46” Tractor-Mount Snowthrower Specifications 86 Allied Attachment & Accessory Manufacturers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87-90

8/1/05

Simplicity Product Specifications

LEGACY XL/2027/2927 SERIES GARDEN TRACTOR SPECIFICATIONS

Engine: Manufacturer Model number Engine horsepower Peak torque Engine rated speeds: High Speed Low Speed Number of cylinders Engine mounting Cylinder configuration Crankshaft alignment Cycle Displacement Bore Stroke Compression ratio Cylinder material Block material Air Cleaner

Crankcase capacity (with filter) Lubrication Coolant Capacity Radiator, overflow Radiator and engine Engine operating temperature Radiator Cooling Capacity

27H 2027H 2927H

27H LC 2027LC 2927LC

27H Diesel 2027D 2927- 2925D

Kohler Command 27 27 HP @ 3600 RPM 40 ft-lbs

Kawasaki FD750D 27 HP @ 3600 RPM 43 ft-lbs @ 2400 rpm

Briggs & Stratton DM 950 D – Model 582447 27 HP @ 3600 rpm 44 ft-lbs @ 2400 RPM

3400 RPM 1800 RPM 2 Direct V-Twin Parallel to Frame 4 Cycle 725 cc (44 cu. in.) 83 mm (3.27 in.) 67 mm (2.64 in.) 9.0 to 1 Cast Iron Sleeve Aluminum Replaceable paper w/ Foam Precleaner

3400 RPM 3400 RPM 1800 RPM 1700 RPM 2 3 Direct Isolation Mounts V-Twin In-line Parallel to Frame Parallel to Frame 4 Cycle 4 Cycle 745 cc (45.5 cu. in.) 952 cc (58.1 cu. in.) 78 mm (3.07 in) 72 mm (2.83 in.) 78 mm (3.07 in) 78 mm (3.07 in.) 8.5 to 1 24 to 1 Cast Iron Sleeve Cast Iron Sleeve Aluminum Cast Iron Dual element. Foam Canister Type precleaner w/3 stage paper element 2.0L (2.1 qt.) 3.0L (3.2 qt.) Full Pressure Full Pressure Lubrication Lubrication

2.0L (2.1 qt.) Full Pressure Lubrication

0.12 gal (0.47L) 0.74 gal (2.8L) 190° - 230° F 56,000 BTU/hr

1 gal (3.79L) 1.5 gal (5.68L) 190° - 230° F

Note: For cold weather operation of diesel engine, Zero Start Heater Kit # 3200001 can be purchased through local NAPA retailer. Fuel consumption @ maximum load*: Full load 2.1 gal per hr/3600 RPM 2.1 gal per hr./3600 RPM

1.44 gal per hr./3600 RPM

One-half load

0.96 gal per hr./3600 RPM

1.8 gal per hr./3200 RPM 1.9 gal per hr./3000 RPM

*Actual fuel consumption will vary with use and conditions. One-half load more near approximates average mowing conditions and other moderate uses.

Simplicity Product Specifications

8/1/05

LEGACY XL/2027/2927 SERIES GARDEN TRACTOR SPECIFICATIONS CONT.

Kohler

Kawasaki

Daihatsu Diesel

Electronic Solenoid Shift Starter 15 amp Regulated Wet 12 Volt 85 min. 500

Electronic Solenoid Shift Starter 20 amp Regulated Wet 12 Volt 85 min. 500

Compression Solenoid, Gear Reduction 40 amp Regulated Wet 12 Volt 85 min. 500

Standard Standard Optional

Standard –– Standard Standard

Standard Standard –– Standard

Standard –– Standard –– –– Standard On 4WD models STD

Standard Standard Standard –– –– Standard On 4WD models STD

Standard Standard Standard Standard Standard Standard On 4WD models STD

Non-Corrosive Polyethylene Rear Center 5.5 US Gal.(20.8 L) Reg. Unleaded Engine Mounted Mechanical Standard

Non-Corrosive Polyethylene Rear Center 5.5 US Gal.(20.8 L) Reg. Unleaded Engine Mounted Electric Standard

Non-Corrosive Polyethylene Rear Center 5.5 US Gal.(20.8 L) Diesel Engine Mounted Gear driven injector pump Spin-on w/water separator

Replaceable

Electrical System: Ignition Type of starter Charging system Battery type Battery voltage Battery reserve capacity Battery cold cranking amp @\0º F Headlights: Halogen bulbs 37 Watt Taillights Rear Worklight Gauges: Fuel Coolant temperature Voltmeter Hourmeter Indicator Lights: Engine oil pressure Battery voltage PTO light front/rear Glow Plug Water Separator Cruise control 4WD RMO

Fuel System: Material: Fuel Fuel Fuel Fuel Fuel Fuel

tank location tank capacity pump location pump type filter

8/1/05

Simplicity Product Specifications

LEGACY XL/2027/2927 SERIES GARDEN TRACTOR SPECIFICATIONS CONT. ALL MODELS Drive Train: Drive controls Transaxle type Transaxle manufacturer Rear axle shaft diameter Rear axle housing Transmission drive-type Continuous torque rating Drawbar rating Max. weight on axle Travel speeds: Forward Reverse Gear ratio Lubricant capacity with filter

Lubricant type Automatic Controlled Traction Differential lock Filter Hydraulic System: Pump type Output @ fast idle System Pressure Implement Relief Charge Relief Hydraulic flow (@ 3600 rpm)

Brakes:

Steering: Type Tilt wheel Turns lock-to-lock Steering wheel diameter PTO: Location Type Control

Side by Side Forward/Reverse Footpedal w/ Hand Control Cruise Integrated pump and transaxle Tuff Torq/Kanzaki K92 1.156 in (29.4 mm) Cast Aluminum Hydrostatic 1,200 ft-lbs (166 kg-m) 1,111 lbs (504 kg) 1,800 lbs (816 kg)

0 – 9.0 mph (0 – 14.4 kph) 0 – 5.5 mph (0 – 8.8 kph) 28.125:1 8.0 qts. (2WD) 8.2 qts. (4WD) 9.5 qts. (4WD w/ 540) Type ‘F’ Standard Standard (Cartridge) w/10 Micro Rate/Full Flow

Variable Displacement Axial Type .488 in 3/rev. (8 cc/rev) 1,000 psi 300-397 psi (2.1 – 2.7 MPa) charge relief 6.2 GPM (23.5 l/min) – No Load 5.3 GPM (20.0 l/min) @ 300 psi (2 MPa) Internal wet disc (Note: differential lock is engaged when brake pedal is depressed)

Hydrostatic Power Steering Standard 2WD 2.6 turns 4WD 1.6 turns 15"

Clutch capacity

Hydraulic clutch located inside transmission Multi-disc clutch pack – self-adjusting On/Off with Push/Pull switch (PTO selector mounted on LH side for 540 PTO models) 81.1 ft-lbs

PTO RPM: Mid Rear (optional)

2200 rpm 540 rpm (standard or optional depending upon model)

Simplicity Product Specifications

8/1/05

LEGACY XL/2027/2927 SERIES GARDEN TRACTOR SPECIFICATIONS CONT. ALL MODELS Hydraulics: Valve Control Quick Connectors Selector

2 spool valve standard 4 way dash mounted joystick 2 sets standard Switch activated solenoid selector switches between mid and front hydraulics

Seat: Style/Height Suspension Adjustment Positions Armrests

18" Super High Back Tapered Spring Seat Slide w/Position Lock Optional

Materials: Frame side rails Front frame mounting plate Seat deck Tunnel Hood/side panels Front bumper Foot pads

Formed Steel 7 ga. (4.5mm) Steel (1/2” thick) Steel Steel Steel Steel Molded Rubber - 3/8"

Paint: Color coat

Powder Paint

Tires: Standard tires: Front turf Rear turf

18x8.5-8 (4 ply) 26x12-12 (4 ply)

Inflation pressure: Front Rear

20 - 22 PSI (138 – 152 kPa) 12 - 15 PSI (83 – 103 kPa)

Wheel Tread: Front Rear

Carlisle (4 ply) Carisle (4 ply)

Optional Tires: Front HDAP Rear HDAP

18x8.5-10 (4 ply) 26x12-12 (2 ply)

Front AG Rear AG

18x9.5 (2 ply) 26x12-12 (4 ply)

8/1/05

Simplicity Product Specifications

LEGACY XL/2027/2927 SERIES GARDEN TRACTOR SPECIFICATIONS CONT. FRONT AXLE:

2WD

4WD

Front axle Front spindles Front wheel bearings Mounting

Cast Iron Steel â&#x20AC;&#x201C; 25mm Precision Ball Castle Nut

Cast Iron

Demountable rim

4WD FRONT AXLE DETAILS: Manufacturer Ratio Transmission Fluid Oil Capacity Input spline spec

Shibaura 10.729:1 80W-90 1.6 qt (1.5 L) 20 mm Dia, 18 tooth spline, 1.0 mod

Simplicity Product Specifications

8/1/05

LEGACY XL/2027/2927 SERIES GARDEN TRACTOR SPECIFICATIONS CONT. Dimensions:

All Models

Length Dimensions Wheel base Overall length

58.5" 81"

Length w/attachment With triple rear bagger With tiller and front weights With rear weight bracket & weights With 3-point hitch With front quick-attach weights With 47" snowthrower With 46" snowthrower With 60" blade With front loader With Fixed Ballast box With 3 pt Ballast Box With Wide Body Cart

106" 139” 92” 96" 94” 117.25" 116" 105" 124.5" 101” 106” 121.25”

Height Dimensions Overall height Height with ROPS

51" 76.5 Est"

Width Dimensions Overall width: Tractor only With 48" mower: Deflector up Deflector down With turbo With 54" mower: Deflector up Deflector down With turbo With 60" mower: Deflector up Deflector down With turbo

44.75" 50" 62" 63" 56" 64" 64" 62” 74” 74.5”

Ground clearance (w/o mower) Ground clearance (w/mower)

8" 5.25"

Turning Radius: 2WD 4WD

28" 35" 2WD / 55” 4WD

Trim Circle Radius: With 48" mower With 54" mower With 60" mower

26" 33" 34”

8/1/05

Simplicity Product Specifications

LEGACY XL/2027/2927 SERIES GARDEN TRACTOR SPECIFICATIONS CONT. Net Weight (no fuel): Tractor and Mower Kohler w/ 48” Mower 54” Mower 60” Mower

2WD

4WD

1052 lbs 1060 lbs 1130 lbs

1202 lbs 1210 lbs 1280 lbs

Kawasaki w/ 48” Mower 54” Mower 60” Mower

1102 lbs 1110 lbs 1180 lbs

1252 lbs 1260 lbs 1320 lbs

Daihatsu Diesel w/ 48” Mower 54” Mower 60” Mower

1203 lbs 1211 lbs 1281 lbs

1353 lbs 1361 lbs 1431 lbs

Mower Decks 48” Mower 54” Mower 60” Mower

222 lbs 230 lbs 300 lbs

Shipping Weight (includes crate) Tractor Only Kohler 1025 lbs Kawasaki 1075 lbs Daihatsu Diesel 1227 lbs

1175 lbs 1225 lbs 1377 lbs

Tractor and Mower Kohler w/ 48” Mower 54” Mower 60” Mower

1297 lbs 1305 lbs 1375 lbs

1447 lbs 1455 lbs 1525 lbs

Kawasaki w/ 48” Mower 54” Mower 60” Mower

1347 lbs 1355 lbs 1425 lbs

1497 lbs 1505 lbs 1570 lbs

Daihatsu Diesel w/ 48” Mower 54” Mower 60” Mower

1448 lbs 1455 lbs 1525 lbs

1598 lbs 1605 lbs 1675 lbs

Simplicity Product Specifications

8/1/05

LEGACY XL/2027/2927 SERIES MOWER SPECIFICATIONS MOWER DECK SPECIFICATIONS 48" Mower

54" Mower

60" Mower

All

Shaft Drive, Spiral Bevel Gearbox

48"

54"

60"

Overall width w/deflector 62"

64"

74"

Cutting height

1 - 5"

Cutting height adjustment Infinite, Electric Motor Operated

Infinite, Electric Motor Operated

Transport ground clearance

5.25"

Deck material thickness

#12 Ga. (2.7mm)

#10 Ga. (3.5mm)

#10 Ga.

Spindles bearings

Ball Bearings, Replaceable

Blade tip speed @ 3600 rpm

15,333 ft./min.

18,200 ft./min.

16,100 ft./min.

Roller diameter

2.75"

Acres per hour at 4.5 mph* 2.1

2.4

2.7

Attachment compatibility: Turbo/Triple bagger10 bu

Option

Tractor compatibility Mower drive

Cutting width

1 - 5"

Option

Wide body cart & collector- Option 17 bu

*Estimated figure. Results based on a smooth area and allowing for a 10 percent loss for mower width overlap and 5 percent time loss for turns and trimming.

8/1/05

Simplicity Product Specifications

LEGACY XL/2027/2927 SERIES FRONT-END LOADER (Manufactured by Kwik Way) LOADER SPECIFICATIONS Breakout Force Lift Capacity Raising Time Lowering Time Attachment Dumping Time Attachment Rollback Time Control Bucket Size Hydraulic Cylinders Counterweight

900 lb. 500 lb. 5.0 sec. 4.0 sec. 3.0 sec. 3.0 sec. Dual Acting Joystick Lever mounted on tractor 48" Double Acting Lift & Bucket Cylinders Min. 300 lbs. Required (use the optional weight box or equivalent)

Subframe Hydraulics Weight (w/subframe w/o Bucket)

Frame Mounted to Tractor Hydraulics from tractor transmission – connected through 4 quick couplers on tractor 445 lbs.

(A) (B) (C) (D) (E) (F) (G) (H)

75.5 in. 53 in. 20.5 in. 40° 53 in. 25° 5.5 in. 42 in.

Maximum Lift Height Clearance with bucket dumped Reach at Maximum Height Maximum Dump Angle Reach with Attachment on ground Attachment Rollback Angle Digging Depth Overall Height in Carry Position

Simplicity Product Specifications

8/1/05

LEGACY XL/2027/2927 SERIES BACKHOE (Manufactured by Kwik Way) BACKHOE SPECIFICATIONS (A) (B) (C) (D) (E) (F) (G) (H) (I)

Digging depth w/2’ flat bottom Swing Loading Height Reach from swing pivot Transport Height Bucket rotation Transport overhang Stabilizer spread operating Stabilizer spread transport

Weight (with mount) Control Bucket sizes

78 in. 151° 84 in. 123 in. 85 in. 147° 44 in. 103 in. 34.5 in. 690 lb. Two lever 9", 12", 16”

Backhoe sold only as complete package with Kwik Way front-end loader.

8/1/05

Simplicity Product Specifications

LEGACY XL/2027/2927 SERIES TRACTOR MOUNT SNOWTHROWER SPECIFICATIONS

47” Snowthrower (Two-Stage) Specifications Type Lift Clearing Width/Height Input Speed/Gear Box Auger Diameter Auger Gear Box Auger Speed Auger Bearings Impeller Diameter Impeller Speed Skid Shoe Adjustment Scraper Bar Shear Bolts Discharge Chute Spout Rotator Chute Deflector Adjustment Throwing Distance Rear Counterweight

2-Stage Hydraulic 47” 2200 RPM / Chain reduction drive in oil bath 13” Worm Drive 547 RPM Ball Bearing 15” 911 RPM/3 Blade 0-1” Steel, Reversible Standard Steel Electric Motor Operated, 270º Rotation Cable Control From Seat Up to 45 ft. 100# Minimum

46” Snowthrower (Single-Stage) Specifications Type Lift Clearing Width/Height Input Speed/Gear Box Auger Diameter/Speed Auger Gear Box Auger Bearings Skid Shoe Adjustment Scraper Bar Discharge Chute Spout Rotator Chute Deflector Adjustment Throwing Distance Rear Counterweight

Single Stage Hydraulic 46”, 17.5” 2400 12”/1000 RPM 1:1 Ball Bearing 0-2” Steel Steel Electric Motor Operated Cable Control, From Seat Up to 40 ft. 100# Minimum

Simplicity Product Specifications

8/1/05

LEGACY XL/2027/2927 SERIES GARDEN TRACTOR ATTACHMENT SPECIFICATIONS 3-POINT HITCH SPECIFICATIONS Category Working Height: Top Bottom Weight Capacity Lift Links Center Link Lower Hitch Point Spread Maximum Minimum

Limited Category ‘1’ 20” minimum from ground level 7” maximum from ground level 450 lbs. Lower Right Side Adjustable Adjustable 35” 12”

" "

50” TILLER SPECIFICATIONS Input Speed Tiller Drive Tilling Width Offset Ability Overall Width Overall Length Tilling Depth Transport Height Tine Speed (RPM) Tine Size Category Adjustment Skid/Parking Stand Front Counterweight Required Tiller Weight Spline Size

8/1/05

540 RPM Center Gear Box to Side Chain Drive, #60 Chain 50” 14” shift to right (10” left/40” right) 54” 36.5” 7” 6” 237 13” Modified Cat 1 Rating Standard 200# 388 lbs. 1-3/8”, 6 Splines

Simplicity Product Specifications

LEGACY XL/2027/2927 SERIES GARDEN TRACTOR ATTACHMENT SPECIFICATIONS CONT. REAR 540 RPM GEARBOX/PTO SPECIFICATIONS Engagement Clutch: Rating Input Speed Output Speeds Housing Spline Size

Hydraulic 17.3 HP 3400 RPM 540 RPM Cast Aluminum 1-3/8”, 6 Splines

TRIPLE COLLECTOR SPECIFICATIONS 48”, 54”, 60” Mowers Bushel Capacity Estimated Weight Capacity Top Shell Construction Bag Construction Estimated Full Weight (Incl. Collector) Front Counterweight Required

10 180# High Density Polyethylene 100% Polyester (Hard Containers Optional) 250# 100#

60” DOZER/SNOW BLADE SPECIFICATIONS Lift Clearing Width – Straight Clearing Width – Angled Height Angling Positions Blade, Gauge Steel Scraper Bar Spring Break-away Rear Counterweight

Hydraulic 60” 51” 16” Hydraulic 5 (0°- 35° –– Left, Right) #7 Ga. (.1793) Heat Treated Steel Yes, 2 Springs 100# Minimum

BOX SCRAPER/SCARIFIER SPECIFICATIONS Heavy-duty 48” assembly with replaceable cutting bar Requires category “1” 3-point hitch Includes 4 removeable scarifier assemblies with hardened teeth 540 PTO-DRIVEN POST HOLE DIGGER W/6" AUGER PTO shaft shields at output and input points of gearbox provide safety and protection from dirt and moisture. Heavy-duty 3" tubular boom, 3" Tubular arch fits Legacy XL 3-point hitch, 6" auger, 32" length, semi-double flight design great for clay and black soil, Replaceable ductile iron auger point and forged steel cutting teeth, Straddle-Mounted, tapered roller bearings at PTO output for extra strength, Enclosed heavy-duty 3:1 gearbox, 9" or 14" auger extensions available through Parts & Service 60" REAR SCRAPER BLADE Blade operates in forward or reverse position, 5 different horizontal angling positions, Blade can be positioned in center of tractor, or in right or left offset position. Three vertical tilt positions, 1/2" thick x 6" height, heat treated reversible cutter blade, 1/4" moldboard thickness, 3-point cat. 1 hitch required (not incl.). Weight: 256 lbs.

Simplicity Product Specifications

8/1/05

LEGACY XL/2027/2927 SERIES GARDEN TRACTOR ATTACHMENT SPECIFICATIONS CONT. 60” ROTARY BROOM Width Brush Drive Input Speed Center Drive Angle Mounting Parking Stand Rear Counterweight Required

60” 26” diameter polypropylene brush, wafers individually replaceable with polypropy lene or poly-wire material Shaft driven from tractor, shear bolt protected 2400 RPM 3 to 1 Gearbox Reduction (800 RPM), to 4 to 1 Side chain final drive (200 RPM) Left and right 15° and 30°. Hydraulic angling standard Same hitch as front dozer blade, offers down pressure adjustment Standard 100#

WEATHER ENCLOSURES SPECIFICATIONS Soft Side Cab Dimensions: Height on tractor Width Length

75” ground to top of cab 39” Widest Part by Footrests 58” Tip of Footrest to Rear

Material Top Sides Front Window Side & Rear Windows Doors

Fiberglass Vinyl Mesh Glass Clear Plastic Vinyl

Ventilation

Mesh Panel Rear Corners

Wiper

Electric 12 Volt

Side Mirrors Deluxe Hardside Cab Dimensions Height Width Length (Front to Back) Material Top Front/Back Front Windows Doors

8/1/05

75" 42" 47"

Steel, insulated, includes coat hook Steel Structure, Glass windows, includes outside rear view mirrors Tempered, pivots and stays open via gas dampeners, includes electric wiper Single piece reinforced glass with lockable door latches, gas shock and rubber strap retention, fresh air position, doors remove easily for summer use

Simplicity Product Specifications

LEGACY XL/2027/2927 SERIES GARDEN TRACTOR ATTACHMENTS SPECIFICATIONS ROPS – ROLLOVER PROTECTIVE STRUCTURE Height (extended) Height (folded) Width Construction

81.5” Est 59.5” Est. 40.5” Est. 2” square tubing Includes seat belt

QUICK-TACH WEIGHTS Material Weight each Tractor rear carrier capacity (Not compatible for use with ROPS or other rear attachments.) Front carrier capacity

Cast Iron 50 lbs. or 33 lbs. 300 lbs. 200 lbs.

LIGHT KIT 12 Volt System 35 Watt Halogen Bulb Mounting location – left grab handle Connector in Pod Sub Frame – Front attachments – 1694395 - Required for proper installation and operation of all front attachments (except Loader)

Simplicity Product Specifications

8/1/05

LEGACY XL/2027/2927 TRACTOR ATTACHMENTS (BACKFIT MATRIX) (Back-Fit Information to install current Legacy XL attachments onto pre-2003 Legacy/1900/2900)

PRODUCT NO. 1692562 1694398/1694497 1694397/1694478 1694432/1694477

DESCRIPTION Chains, Tire 26” (fits 24”, 26” tires) Mower, 60” Mower, 54” Mower, 48”

BACK-FIT NOTES Fits as is Will not fit Will not fit Will not fit

1694389 1694390 1694542

Catcher – Triple Turbo Clean Sweep (requires 1694390 Tube Group & Appropriate Turbo) Catcher; Hitch & Tube Group Wide Body Cart

1694545 1694496 1693706 1694497 1694508

Wide body cart & tube group Turbo – 48” Mower Turbo – 54” Mower Turbo – 60” Mower Mulching Kit – 54” Mower

Will fit (with 1693496 hitch/tube group & appropriate turbo) Will not fit Will fit (with 1694547 hitch/tube kit & appropriate turbo) Will not fit Fits as is Fits as is Fits as is Fits as is

1694387 1694388 1694403 1694404 1694395

Blade, 60” Hydraulic Angling Broom, 60” Hydraulic Angling Snowthrower, 46” Single-Stage Snowthrower, 47” Two-Stage Hitch – Front Attachments

Will Will Will Will Will

1694396/1694486

Loader, Front-End (includes 1694386 Ballast Box) Will not fit

1694405 1694391 1694399

Tiller, 50” (requires 1694399 540 Rear PTO & 1694391 3 point Hitch) Hitch, 3 Point Modified Category “1” 540 rpm Rear PTO

Will not fit Will not fit

1694538 1694409 1692941 1691319 1692939 1693160

Ballast Box (3pt or fixed) Weight Carrier – Front Weight Carrier – Rear Weight, Suitcase Quick-Tach (ea.) 33 lb. Weight, Suitcase Quick-Tach (ea.) 50 lb. Weight, Rear Wheel (ea.)

Will Will Fits Fits Fits Fits

not fit not fit as is as is as is as is

1694400 1694401 1694402 1686801 1692125

ROPS (Rollover Protection Structure) Cab – Hard Side Cab – Soft Side Light Kit – Rear Cart – Dump (10 cu. ft.)

Will Will Will Fits Fits

not fit not fit not fit as is (must be hardwired) as is

1687021 1701345

Arm Rests 26” Ag Tire

Will not fit Fits as is

8/1/05

not not not not not

fit fit fit fit fit

Will not fit

Simplicity Product Specifications

LEGACY XL/2027/2927 TRACTOR ATTACHMENTS (UPFIT MATRIX) (Up-Fit Information to install pre-2003 Legacy/1900/2900 attachments to 2004 Legacy XL)

PRODUCT NO. 1690095 1691311 1691620 1692562 1692860/1693123 1692863/1693122 1692891 1692923 1692925 1692926 1692927 1692928 1692929 1692930 1692932 1692933 1692934 1692935 1692936 1692937 1692938

1692939 1692940 1692941 1692942 1693160 1693175 1693204/4158 1686801 1693273 1693274 1686796 1693447 1693448

DESCRIPTION UP-FIT REQUIREMENTS Chains, Tire 23” Will not fit Bucket, 48” (for loader) Will not fit Vacuum Collector Cart Side Extensions & Cover Will not fit Chains, Tire 26” (fits 24”, 26” tires) Fits as is Mower, 60” Will not fit Mower, 48” Will not fit Rear PTO, 2000 RPM Will not fit Ballast Box Will not fit Blade, 60” Hydraulic Angling Will not fit Snow Cab – Softside Will not fit ROPS (Rollover Protection Structure) Will not fit Hitch, 3 Point Category “O” Will not fit Hose, Hitch/Tube 60” (for large capacity cart) Will not fit Hose, Hitch/Tube 48” (for large capacity cart) Will not fit Loader, Front-End Will not fit Snow Cab – Hard Side Will not fit Snowthrower, 46” Single-Stage Will not fit Tiller, 50” (requires 1692891 PTO & 1692928 3-Point Hitch) Will not fit Turbo – 48” Mower Will not fit Turbo – 60” Mower Will not fit Turbo – Cart Collector Fits as is (except on 3 pt. hitch requires 1725599,1724807 & 1725600) Weight, Suitcase Quick-Tach (ea.) 50 lb. Fits as is Weight Carrier – Front Will not fit Weight Carrier – Rear Fits as is Snowthrower, 47” Two-Stage Will not fit Weight, Rear Wheel (ea.) Fits as is Ladder Sub Frame Will not fit Triple Collector, Turbo Clean Sweep Will not fit Light Kit – Rear Fits as is Blade, 60” Dozer, Mechanical Angling Will not fit Hydraulic Lift & Angling Kit (see notes) Will not fit Arm Rests Will not fit Rear PTO, 540 RPM Will not fit Tiller, 50” – 540 RPM (requires 1693447, 1692928) Will not fit

Simplicity Product Specifications

8/1/05

PRESTIGE/1800/2800 SERIES GARDEN TRACTOR SPECIFICATIONS 23H 23H PS 1823H PS 2823H PS

Engine: Manufacturer Model number Engine horsepower Peak torque Engine rated speeds: Fast idle (no load) Low idle (no load) Number of cylinders Engine mounting Cylinder configuration Crankshaft alignment Cycle Displacement Bore Stroke Compression ratio Cylinder material Block material Air filter type Crankcase capacity (with filter) Lubrication system Muffler

8/1/05

Kohler Commandâ&#x201E;˘ V-Twin 23HP @ 3600 RPM 33 ft. lbs.

3400 RPM 1800 RPM 2 Direct V-Twin Vertical to Frame 4 Cycle 674CC (41 cu. In.) 80mm (3.15 in.) 67mm (2.64 in.) 8.5 to 1 Overhead Valve, Cast Iron Sleeve Aluminum Ducted Paper Cartridge and Foam Pre-cleaner 1.9L (2.0 qt.) Full Pressure Lubrication Quiet Compact. Low Back Pressure

Simplicity Product Specifications

PRESTIGE/1800/2800 SERIES GARDEN TRACTOR SPECIFICATIONS CONT.

STEERING: Type Tilt Wheel Steering Wheel Turning Radius

Gear and Sector, 1.75 turns lock to lock 40 degree total tilt – 5 positions 13.5” Soft Touch Inside Rear Tire: 18 in (45 cm)

Power Assist Steering Specifications Torque Generator

Eaton Model #217-1059-002 (Excludes Manual Steer Model)

CONTROLS: Ground Speed Control Clutch/Brake Pedal Parking Brake Lever Mower lift Throttle/Choke Cruise Control Differential lock

Foot Pedal – Side by Side Depress to apply brake & declutch transmission On lower dash – raise to engage parking brake Hydraulic; control located on dash Side by Side Adjustable friction design – slide forward to increase speed Pedal – Depress to engage diff lock

Switches Ignition PTO RMO Headlight Spout Rotator

3 position Indak Yellow button – pull up to engage clutch Key switch activated Rocker type Optional – provided with snow attachments

Left Pod Cupholder Storage Container Right Pod Cruise Lever Grab Handles

Standard Standard Standard Integrated into pods

Simplicity Product Specifications

8/1/05

PRESTIGE/1800/2800 SERIES GARDEN TRACTOR SPECIFICATIONS CONT. Electrical System: Ignition Type of starter Charging system Battery type Battery voltage Battery reserve capacity Battery cold cranking amp @ 0° F 12 Volt accessory outlet

Electronic Solenoid Shift Starter 15 amp Regulated Wet 12 Volt 85 min. 500 cca Standard

Safety Interlock system

Standard

Headlights: Bulbs Rear Worklight

(4) 27 Watt Incandescent Bulbs Optional

Instrumentation: Fuel Gauge Clock Hourmeter Maintenance Monitor Display

Standard Standard (set by pressing tactile button on RH side of panel) Standard Standard – OIL LUBE shown in display at 5 hrs and every 50 hrs there after (reset by pressing buttons for 3 sec) 7mm LCD

Indicator Lights: Engine oil pressure Low Battery voltage PTO light Cruise Light

Standard Standard Standard Standard

Fuel System: Fuel tank material: Fuel fill location Fuel tank capacity Fuel Fuel pump location Fuel pump type Fuel filter

Non-Corrosive Polyethylene Left Rear 4.0 US Gal. (15.1L) Reg. Unleaded Engine Mounted Mechanical Standard Replaceable

8/1/05

Simplicity Product Specifications

PRESTIGE/1800/2800 SERIES GARDEN TRACTOR SPECIFICATIONS CONT. TRANSMISSION: Type Pump Motor Hydraulic Fluid Fluid Capacity Differential Axle Shaft Diameter Continuous Output Torque Rating Drawbar Rating Maximum Weight on axle Controlled traction bias

K71 Tuff Torq w/Hydraulic Lift, Differential lock and Automatic Controlled Traction Variable Displacement Axial Piston Fixed Displacement Reversible Axial Piston 10W30 CD Oil Transmission only: 1.2 gallons (4.6L) Bevel Gear Type with Controlled Traction 1 in 405 ft. lbs. 440 lbs. 728 lbs. 30 – 50 ft-lbs

Control Free Wheel Lever

Foot Control – Infinitely Variable Std at back of tractor

Speeds Forward Reverse

0 – 7.5 MPH (0 –12.1 km/h) 0 – 4.4 MPH (0 – 7.1 km/h)

CHASSIS: Frame Bumper Front Axle Front Spindle Dia

10 Gauge Welded (3.5mm) Steel Cast Iron 25 mm (1”)

TIRES: Rear Wheels Front Wheels Front Wheel Bearings

24 x 12.00-12 (demountable hub) 16 x 6.50-8 Ball Bearing

Tire Pressure Rear Front

6-8 psi (41-55 kPa) 15-20 psi (103-138 kPa)

HOOD:

SEAT: Height Seat Adjustment Suspension Pitch adjustment Armrests

4 piece steel with louvered hood top Tips forward for easy access to engine

18 in Super high back Quick adjust lever, 7 positions 2 position 3 position Optional

Simplicity Product Specifications

8/1/05

PRESTIGE/1800/2800 SERIES GARDEN TRACTOR SPECIFICATIONS CONT. DIMENSIONS: Overall Length Overall Width Height To top of Steering Wheel

75 in. (190 cm) 42 in. (107 cm)

Wheel Base

53 in. (135 cm)

50 in. (127 cm)

Weight (approx.) Tractor only 23hp Manual Steer 23hp Power Steer

666 lbs. (302 kg) 666 lbs. (302 kg)

Tractor/mower combination 23hp w/ 44” Mower 23hp w/ 50” Mower 23hp w/ 54” Mower

779 lbs. (352 kg) 791 lbs. (359 kg) 858 lbs. (389 kg)

Shipping Weight (approx.) Tractor only Tractor/mower combination 23hp w/ 44” Mower 23hp w/ 50” Mower 23hp w/ 54” Mower

8/1/05

786 lbs. (357 kg) 899 lbs. (407 kg) 911 lbs. (413 kg) 978 lbs. (444 kg)

Simplicity Product Specifications

PRESTIGE/1800/2800 SERIES GARDEN TRACTOR SPECIFICATIONS CONT. MOWER DIMENSIONS 54” Mower Mower housing Effective Cutting Width Overall Width with Deflector Overall Width with Turbo

10 54 64 64

Variable Cutting Ht. Blade Arrangement Mower Drive Spindle Bearings

1.25- 3.75 in. (3.1 – 9.5 cm) Three Staggered Blades V-Belt From Tractor Engine PTO Electric Clutch Lubricated and Sealed Ball Bearings Lube Fitting Provided 180 lbs. (82 kg)

Weight

ga. (3.5 mm) in (137 cm) in (165 cm) in (165 cm)

50” Mower Mower housing Effective Cutting Width Overall Width with Deflector Overall Width with Turbo

12 50 62 64

ga (2.7 mm) in (127 cm) in (157.5 cm) in (162.5 cm)

Variable Cutting Ht. Blade Arrangement Mower Drive Spindle Bearings Weight

1.25-3.75 in. (3.1 – 9.5 cm) Three Staggered Blades V-Belt From Tractor Engine PTO Electric Clutch Lubricated and Sealed Ball Bearings Lube Fitting Provided 125 lbs. (57 kg)

44” Mower Mower Housing 12 ga (2.7 mm) Effective Cutting Width Overall width with Deflector Overall width with Turbo

44 in. (111.8 cm) 56 in. (142.2 cm) 58 in. (147 cm)

Variable Cutting Ht. Blade Arrangement Mower Drive Spindle Bearings

1.25-3.75 in. (3.1 – 9.5 cm) Three Staggered Blades V-Belt From Tractor Engine PTO Electric Clutch Lubricated and Sealed Ball Bearings Lube Fitting Provided

Weight

112 lbs. (51 kg)

Simplicity Product Specifications

8/1/05

PRESTIGE/1800/2800 SERIES GARDEN TRACTOR SPECIFICATIONS CONT. DIMENSIONS WITH ATTACHMENTS: Cab Tractor height w/ Snowcab

72 in (183 cm)

42” Snowthrower Clearing Width Tractor length with Snowblower Tractor length with Snowblower and Rear weights

42 in. (107 cm) 104 in. (264 cm) 115 in. (292 cm)

46” Snowthrower Clearing Width Tractor length with Snowblower Tractor length with Snowblower and Rear weights

46 in. (117 cm) 104 in. (264 cm) 115 in. (292 cm)

42” Two-Stage Snowthrower Clearing Width Tractor length with Snowblower Tractor length with Snowblower and Rear weights

42 in. (107 cm) 113 in. (287 cm) 124 in. (315 cm)

42” Dozer Blade Clearing Width Maximum Dozing Angle Tractor Length w/ Dozer blade Tractor Length w/ Dozer blade and rear weights

42 in. (107 cm) 30 degrees 99 in (251 cm) 113 in (287 cm)

36” Tiller Tilling Width Maximum Tilling Depth Lift Height Tractor Length w/ Tiller Tractor Length w/ Tiller and front weights

36 in. (91 cm) 6 in. (15 cm) 5 in. (12.7 cm) 108 in. (274 cm) 119 in. (302)

Weight Carriers Front Rear

8/1/05

Accepts a maximum of (3) 33 lb Suitcase Weights or (2) 50 lb Suitcase Weights Accepts a maximum of (3) 33 lb Suitcase Weights or (2) 50 lb Suitcase Weights

Simplicity Product Specifications

PRESTIGE/1800/2800 SERIES GARDEN TRACTOR SPECIFICATIONS CONT.

Two Bag Collector (44” & 50” mowers) Bushel Capacity Estimated Weight Capacity Top Shell Construction Bag Construction Estimated Full Weight (incl. Collector) Front Counterweight Required Tractor length with catcher Tractor length with catcher and front weights

6.5 120 lbs. High Density Polyethylene 100% Polyester 170 lbs. 66 lbs. 103 in (262 cm) 114 in(290 cm)

Triple Collector (50”/54” mower) Bushel Capacity Estimated Weight Capacity Top Shell Construction Bag Construction Estimated Full Weight (Incl. Collector) Front Counterweight Required Tractor length with catcher Tractor length with catcher and front weights

10 180 lbs. High Density Polyethylene 100% Polyester (Hard Containers Optional) 250 lbs. 100 lbs. 103 in (262 cm) 114 in(290 cm)

WIDE BODY CART Centerline of hitch pin holes to farthest point in rear of cart Width of cart Height of cart

40.5” 46” 41.5”

Simplicity Product Specifications

8/1/05

CONQUEST/1700/2700 SERIES YARD TRACTOR SPECIFICATIONS

21H 1721H 2721H

23H 1723H 2723H

Briggs & Stratton Vanguard™ V-Twin 21 HP @ 3600 rpm

Briggs & Stratton Vanguard™ V-Twin 23 HP @ 3600 rpm

3400 RPM ± 100 1750 RPM 2 2.83 in (72 mm) 2.75 in (70 mm) 34.75 Cu. In (570 cc) Overhead Valve, Cast-Iron Sleeves, Aluminum Crankcase 12 Volt, 16 amp Alternator Regulated Battery 340 Cold Cranking amps, 41 Min. Reserve Capacity Industrial Rated Starter Motor Magnetron Electronic Ignition Ducted Paper Cartridge and Foam Precleaner Large 325 sq. in Air Filtering System Full Pressure Lube w/Oil Filter 48 oz. W/Filter (1.4L) Quiet Compact, Low, Back Pressure

3400 RPM ± 100 1750 RPM 2 2.83 in (72 mm) 2.75 in (70 mm) 34.75 Cu. In (570 cc) Overhead Valve, Cast-Iron Sleeves, Aluminum Crankcase 12 Volt, 16 amp Alternator Regulated Battery 340 Cold Cranking amps, 41 Min. Reserve Capacity Industrial Rated Starter Motor Magnetron Electronic Ignition Ducted Paper Cartridge and Foam Precleaner Large 325 sq. in Air Filtering System Full Pressure Lube w/ Oil Filter 48 oz. w/Filter (1.4 L) Quiet Compact, Low Back Pressure

ENGINE: Manufacturer Model Horsepower Engine rated speeds: Fast idle (no load) Low idle (no load) Cylinder Bore Stroke Displacement Construction Electrical System

Ignition Air Cleaner Type

Lubrication System Oil Capacity Muffler

8/1/05

Simplicity Product Specifications

CONQUEST/1700/2700 SERIES YARD TRACTOR SPECIFICATIONS CONT. STEERING: Type Steering Wheel Turning Radius

Gear and Sector, 1.75 turns lock to lock 13.5” Soft Touch Inside Rear Tire: 18 in (45 cm)

CONTROLS: Ground Speed Control Clutch/Brake Pedal Parking Brake Lever Mower lift Throttle/Choke Cruise Control Differential lock

Foot Pedal – Side by Side Depress to apply brake & declutch transmission On lower dash – raise to engage parking brake Manual control located on left dash, spring assisted, adjustable Side by Side Adjustable friction design – slide forward to increase speed Pedal – Depress to engage diff lock

Switches Ignition PTO RMO Headlight Spout Rotator

3 position Indak Yellow button – pull up to engage clutch Key switch Activated Rocker type Optional – provided with snow attachments

Left Pod Cupholder Storage Container

Standard Standard

Right Pod Cruise Lever Grab Handles

Standard Integrated into pods

Simplicity Product Specifications

8/1/05

CONQUEST/1700/2700 SERIES YARD TRACTOR SPECIFICATIONS CONT. Electrical System: Ignition Type of starter Charging system Battery type Battery voltage Battery reserve capacity Battery cold cranking amp @ 0° F 12 Volt accessory outlet

Electronic Solenoid Shift Starter 16 amp Regulated Wet 12 Volt 41 min. 340 cca Standard

Safety Interlock system

Standard

Headlights: Bulbs Rear Worklight

(4) 27 Watt Incandescent Bulbs Optional

Instrumentation: Fuel Gauge Clock Hourmeter Maintenance Monitor Display

Indicator Lights: Engine oil pressure Low Battery voltage PTO light Cruise Light

Standard Standard Standard Standard

Fuel System: Fuel tank material: Fuel fill location Fuel tank capacity Fuel Fuel pump location Fuel pump type Fuel filter

Non-Corrosive Polyethylene Left Rear 4.0 US Gal. (15.1L) Reg. Unleaded Engine Mounted Mechanical Standard Replaceable

8/1/05

Simplicity Product Specifications

CONQUEST/1700/2700 SERIES YARD TRACTOR SPECIFICATIONS CONT. TRANSMISSION: Type Pump Motor Hydraulic Fluid Differential Axle Shaft Diameter Continuous Output Torque Rating Drawbar Rating Maximum Weight on axle Controlled traction bias

K66 Tuff Torq w/ Automatic Controlled Traction & Differential lock Variable Displacement Axial Piston Fixed Displacement Reversible Axial Piston 2.6 Qts (2.5 L) 10W30 CD Oil Bevel Gear Type with Controlled Traction 1" 310 ft. lbs. 324 lbs. 697 lbs. 30 – 50 ft-lbs

Control Free Wheel Lever

Foot Control – Infinitely Variable Standard at back of tractor

Speeds Forward Reverse

0 – 6.1 MPH (0 – 9.8 km/h) 0 – 3.0 MPH (0 – 4.8 km/h)

CHASSIS: Frame Bumper Front Axle Front Spindle Dia

10-Gauge Welded (3.5mm) Steel Cast Iron 25 mm (1”)

TIRES: Rear Wheels Front Wheels Front Wheel Bearings

23 x 10.50-12 (demountable hub) 16 x 6.50-8 Ball Bearing

Tire Pressure Rear Front

6-8 psi (41-55 kPa) 15-20 psi (103-138 kPa)

HOOD:

SEAT: Height Seat Adjustment Suspension Pitch adjustment Armrests

4 piece steel with louvered hood top Tips forward for easy access to engine

18" Super high back Quick adjust lever, 7 positions 2 position 3 position Optional

Simplicity Product Specifications

8/1/05

CONQUEST/1700/2700 SERIES YARD TRACTOR SPECIFICATIONS CONT.

DIMENSIONS: Overall Length 75 in. (190 cm) Overall Width Height To top of Steering Wheel

39 in. (99 cm)

Wheel Base

53 in. (135 cm)

47 in. (119 cm)

Weight (approx.) Tractor only

586 lbs.

Tractor/mower combination 21hp w/ 44” Mower 23hp w/ 50” Mower 23hp w/ 54” Mower

700 lbs (317 kg) 711 lbs (323 kg) 778 lbs (353 kg)

Shipping Weight (approx.) Tractor only

706 lbs. (320 kg)

Tractor/mower combination 21hp w/ 44” Mower 23hp w/ 50” Mower 23hp w/ 54” Mower

820 lbs (372 kg) 831 lbs (377 kg) 898 lbs (407 kg)

8/1/05

Simplicity Product Specifications

CONQUEST/1700/2700 SERIES YARD TRACTOR SPECIFICATIONS CONT.

MOWER DIMENSIONS 54” Mower Mower housing Effective Cutting Width Overall Width with Deflector Overall Width with Turbo

10 54 64 64

Variable Cutting Ht. Blade Arrangement Mower Drive Spindle Bearings

1.25- 3.75 in. (3.1 – 9.5 cm) Three Staggered Blades V-Belt From Tractor Engine PTO Electric Clutch Lubricated and Sealed Ball Bearings Lube Fitting Provided 180 lbs. (82 kg)

Weight

ga. (3.5 mm) in (137 cm) in (165 cm) in (165 cm)

50” Mower Mower housing Effective Cutting Width Overall Width with Deflector Overall Width with Turbo

12 50 62 64

ga (2.7 mm) in (127 cm) in (157.5 cm) in (162.5 cm)

Variable Cutting Ht. Blade Arrangement Mower Drive Spindle Bearings Weight

1.25-3.75 in. (3.1 – 9.5 cm) Three Staggered Blades V-Belt From Tractor Engine PTO Electric Clutch Lubricated and Sealed Ball Bearings Lube Fitting Provided 125 lbs. (57 kg)

44” Mower Mower Housing Effective Cutting Width Overall width with Deflector Overall width with Turbo

12 44 56 58

ga (2.7 mm) in. (111.8 cm) in. (142.2 cm) in. (147 cm)

Variable Cutting Ht. Blade Arrangement Mower Drive Spindle Bearings

1.25-3.75 in. (3.1 – 9.5 cm) Three Staggered Blades V-Belt From Tractor Engine PTO Electric Clutch Lubricated and Sealed Ball Bearings Lube Fitting Provided

Weight

112 lbs. (51 kg)

Simplicity Product Specifications

8/1/05

CONQUEST/1700/2700 SERIES YARD TRACTOR SPECIFICATIONS CONT. DIMENSIONS WITH ATTACHMENTS: Cab Tractor height w/ Snowcab

72 in (183 cm)

42” Snowthrower Clearing Width Tractor length with Snowblower Tractor length with Snowblower and Rear weights

42 in. (107 cm) 104 in. (264 cm) 115 in. (292 cm)

46” Snowthrower Clearing Width Tractor length with Snowblower Tractor length with Snowblower and Rear weights

46 in. (117 cm) 104 in. (264 cm) 115 in. (292 cm)

42” Two - Stage Snowthrower Clearing Width Tractor length with Snowblower Tractor length with Snowblower and Rear weights

42 in. (107 cm) 113 in. (287 cm) 124 in. (315 cm)

42” Dozer Blade Clearing Width Maximum Dozing Angle Tractor Length w/ Dozer blade Tractor Length w/ Dozer blade and rear weights

42 in. (107 cm) 30 degrees 99 in (251 cm) 113 in (287 cm)

36” Tiller Tilling Width Maximum Tilling Depth Lift Height Tractor Length w/ Tiller Tractor Length w/ Tiller and front weights

36 in. (91 cm) 6 in. (15 cm) 5 in. (12.7 cm) 108 in. (274 cm) 119 in. (302)

Weight Carriers Front Rear

8/1/05

Accepts a maximum of (3) 33 lb Suitcase Weights or (2) 50 lb Suitcase Weights Accepts a maximum of (3) 33 lb Suitcase Weights or (2) 50 lb Suitcase Weights

Simplicity Product Specifications

CONQUEST/1700/2700 SERIES YARD TRACTOR SPECIFICATIONS CONT. Two Bag Collector (44”/50” mower) Bushel Capacity Estimated Weight Capacity Top Shell Construction Bag Construction Estimated Full Weight (incl. Collector) Front Counterweight Required Tractor length with catcher Tractor length with catcher and front weights

6.5 120 lbs. High Density Polyethylene 100% Polyester 170 lbs. 66 lbs. 103 in (262 cm) 114 in (290 cm)

Triple Collector (44”/50”/54” mower) Bushel Capacity Estimated Weight Capacity Top Shell Construction Bag Construction Estimated Full Weight (Incl. Collector) Front Counterweight Required Tractor length with catcher Tractor length with catcher and front weights

10 180# High Density Polyethylene 100% Polyester (Hard Containers Optional) 250# 100# 103 in (262 cm) 114 in (290 cm)

WIDE BODY CART Centerline of hitch pin holes to farthest point in rear of cart Width of cart Height of cart

40.5” 46” 41.5”

Simplicity Product Specifications

8/1/05

CURRENT ATTACHMENTS BACK-FIT MATRIX FOR LANDLORD/1800/2800 AND PRE-2002 BROADMOOR/1600/2600 Fitment to Landlord 1693754 1691986 1692125 1694153 1694389 1694154 1690095 1692884 1692885 1693707 1694147 1694038 1694039 1694040 1694267 1694152 1694295, 1694144 1694296, 1694150 1694146 1694151 1694192 1693706 1693869 1694306 1694164 1693160 1694312 1694155 1692939 1691319 1694163 1694238 1690819 1694332 1694753 1694757 1694748

Blade, 42” Dozer Cart, Dump (6.5 cu. Ft.) Cart, Dump (10 cu. Ft.) Catcher, Turbo Clean Sweep Twin (for 44” & 50” Mower Only) Catcher, Clean Sweep Triple Catcher Hitch, Tube Group Chains, Tire, Pr. (23 x 10.5 x 12) Grass Mulcher Kit, 44” Grass Mulcher Kit, 50” Grass Mulcher Kit, 54” Hitch (for 42” blade) Mower, 44” Rotary Mower, 50” Rotary Mower, 54” Rotary Quad Bagger Dump Cart Snow Cab (Soft Side) Single Stage Snow – 42” Single Stage Snow – 46” Subframe Tiller, 36” Single Point Hitch, Rear Turbo (For 54” Mower) Turbo (For 44” & 50” Mower) Turbo Mounting Kit (For 44”&50” Mower) Turbo Quad Bagger (For 44”,50”&54” Mower) Weight, Rear Wheel (1 Each) Weight Carrier, Rear Weight Carrier, Front Weight, Suitcase 50 lb. Weight, Suitcase 33 lb. Wide Body Cart & Hitch (17 bu. Incl. Cover/Tube) Two-Stage – (SEE PRESTIGE) Dethatcher Adapter Kit/Dethatcher Tire Chain for 24" tire Catcher hitch tube group Chains 22x10-10

Fits Fits Fits Fits

as as as as

is is is is

Fits Will Fits Fits Fits Fits Will Fits Fits Fits Will Will Will Will Will Will Will Fits Fits Fits

as is not fit as is as is as is as is not fit if both upstops are removed as is if RH upstop is removed not fit not fit not fit not fit not fit not fit not fit as is as is as is

Fitment to Pre-2002 Broadmoor Fits as is Fits as is Fits as is Will not fit Fits as is Will not fit Will not fit Fits as is Fits as is Will not fit Will not fit See Note #1 See Note #1 Will not fit Will not fit Will not fit Will not fit Will not fit Will not fit Will not fit Will not fit Will not fit Fits as is Fits as is

Will not fit

Fits Fits Will Fits Fits Will

as is as is not fit as is as is not fit

Will Will Will Fits Fits Will

not fit not fit not fit as is as is not fit

Fits Will Will Will Will

as is not fit not fit not fit not fit

Fits Will Will Will Will

as is not fit not fit not fit not fit

Note 1: To fit 44” and 50” mowers onto pre-2002 Broadmoor – both upstops must be removed and the RH upstop needs to be replaced by 1704098. Lift chains need to be removed and replaced by lift link (p/n 1705049) along with hardware. Also hitch and pitch rod need to be fastened in upper holes

8/1/05

Simplicity Product Specifications

UP-FIT OF LANDLORD AND PRE-2002 BROADMOOR ATTACHMENTS TO PRESTIGE/1800/2800 CONQUEST/1700/2700

1693754 1691986 1692125 1692029

Blade, 42” Dozer Cart, Dump (6.5 cu. Ft.) Cart, Dump (10 cu. Ft.) Catcher, Turbo Clean Sweep Twin

1693501 1693482 1690095 1690819 1692679 1692884 1692885 1693707 1693756 1692686 1692688 1693629 1693478 1693107 1693498 1692807 1691522

Catcher, Clean Sweep Triple Catcher, Hitch, Tube Group Chains, Tire, Pr. (23 x 10.5 x 12) Dethatcher, Lawn, 35” Dethatcher Adapter Grass Mulcher Kit, 44” Grass Mulcher Kit, 50” Grass Mulcher Kit, 54” Hitch (For 42” Blade) Mower, 44” Rotary Mower, 50” Rotary Mower, 54” Rotary Power Steering Kit Quad Bagger Dump Cart Rear Attachment Kit Snow Cab Single-Stage Snowthrower, 42”

1693242 1693500 1692041 1693578 1690039 1693497 1693227 1693228 1693706 1693743 1691837 1693160 1692625 1692743 1693271 1693443 1692939 1691319 1693744

Two-Stage Snowthrower, 40” Snowthrower Hitch, Hydraulic & Electric Lift Snowthrower Hitch, Manual Lift Tractors Tiller, 36” Tiller, 36” Tiller Adapter Kit Turbo (For 44” Mower) Turbo (For 50” Mower) Turbo (For 54” Mower) Turbo Quad Bagger (For 44, 50 & 54” Mower) Weight, Front Counter Weight, Rear Wheel (1 Each) Weight Weight Carrier, Rear Weight Carrier, Rear Weight Carrier, Front Weight, Suitcase 50 lb. Weight, Suitcase 33 lb. Wide-Body Cart & Hitch (17 bushel)

Fitment to Conquest/Prestige Requires 1694146, 1694147 Fits as is Fits as is Requires kit #1686889 & Turbo (Will not fit w/44" mower) Requires kit #1686890 Will not fit Fits as is (Will not fit 2005 and Prestige) Requires 1694332 Adapter Will not fit Fits as is Fits as is Fits as is Will not fit Will not fit Will not fit Will not fit Will not fit Requires kit 1686932 Will not fit Will not fit Requires hitch 1693500 or 1692041 hitch and Kit # 1686886 Will not fit Requires Kit #1686886 Requires kit #1686886 Requires kit 1686888 & 1694192 Requires 1686931 & 1694192 Will not fit Requires 1686940 Requires 1686940 Fits as is Fits as is Will not fit Fits as is Fits as is Will not fit Will not fit Will not fit Fits as is Fits as is Requires kit 1686932 & Turbo

Simplicity Product Specifications

8/1/05

BROADMOOR/1600/2600 SERIES LAWN TRACTOR SPECIFICATIONS 18H Kohler

ENGINE: Manufacturer Kohler Model Command™ 460 Horsepower 18HP @3600 RPM Engine rated Speed Fast Idle (No load) 3400 rpm Low Idle (No load) 1200 rpm Cylinder 1 Bore 3.54 in (90 mm) Stroke 3.03 in (77 mm) Displacement 29.9 Cu. In (492 cc) Construction Overhead Valve, Cast-Iron Sleeves, Aluminum Crankcase

18 H Briggs Vanguard

20 H Briggs Vanguard 1620 2620

Briggs & Stratton Vanguard™ V-Twin 18 HP @ 3600 RPM

Briggs & Stratton Vanguard™ V-Twin 20 HP @ 3600 RPM

3400 rpm 1750 rpm 2 2.83 in (72 mm) 2.75 in (70 mm) 34.75 Cu. In (570 cc) Overhead Valve, Cast-Iron Sleeves, Aluminum Crankcase

12 Volt, 16 amp Alternator Regulated Battery

Electrical System

12 Volt, 15 amp Alternator Regulated Battery

Battery

230 Cold Cranking amps 230 Cold Cranking amps 230 Cold Cranking 23 min. Reserve 23 min. Reserve 23 min. Reserve Capacity Capacity Capacity

Starter

Industrial Rated Starter Motor

Ignition

Electronic Ignition

Magnetron Electronic Ignition

Air Cleaner Type

Ducted Paper Cartridge and Foam Pre-cleaner Large 325 sq. in. Air Filtering System

Ducted Paper Cartridge and Foam Pre-cleaner Large 325 sq. in Air Filtering System

Lubrication System Full Pressure Lube w/ Oil Filter Oil Capacity 64 oz. (1.9 L) Muffler Quiet Compact, Low Back Pressure

Full Pressure Lube w/ Oil Filter 56 oz. W/Filter (1.7L) Quiet Compact, Low Back Pressure

8/1/05

Simplicity Product Specifications

BROADMOOR/1600/2600 SERIES LAWN TRACTOR SPECIFICATIONS CONT. STEERING: Type Steering Wheel Turning Radius

Gear and Sector, 1.75 turns lock to lock 13.5” Soft Touch Inside Rear Tire: 18 in (45 cm)

CONTROLS: Ground Speed Control Clutch/Brake Pedal Parking Brake Lever Mower lift Throttle/Choke Cruise Control Forward/Reverse Hand Control

Foot Pedal – Side by Side Depress to apply brake & declutch transmission On lower dash – raise to engage parking brake Manual control located on right pod Side by Side (Single lever on Kohler models) Adjustable friction design – slide forward to increase speed Optional Kit # 1686925

Switches Ignition PTO RMO Headlight Spout Rotator

3 position Indak Yellow button – pull up to engage clutch Key switch Activated Rocker type Optional – provided with snow attachments

Left Pod Cupholder Storage Container

Standard Standard

Right Pod Cruise Lever Grab Handles

Standard on Briggs powered machines Integrated into pods

Simplicity Product Specifications

8/1/05

BROADMOOR/1600/2600 SERIES LAWN TRACTOR SPECIFICATIONS CONT. Electrical System: Ignition Type of starter Charging system Battery type Battery voltage Battery reserve capacity Battery cold cranking amp @ 0째 F 12 Volt accessory outlet

Electronic Briggs & Kohler - Industrial Starter 15 or 16 amp Regulated Wet 12 Volt 23 min. 230 cca Standard

Safety Interlock system

Standard

Headlights: Bulbs Rear Worklight

(4) 27 Watt Incandescent Bulbs Optional

Instrumentation (Briggs & Kohler models): Fuel Gauge Hourmeter

In tank under seat Standard

Fuel System: Fuel tank material Fuel fill location Fuel tank capacity Fuel Fuel pump location Fuel pump type Fuel filter

Non-Corrosive Polyethylene Left Rear 4.0 US Gal. (15.1L) Reg. Unleaded Engine Mounted Mechanical Standard Replaceable

8/1/05

Simplicity Product Specifications

BROADMOOR/1600/2600 SERIES LAWN TRACTOR SPECIFICATIONS CONT. TRANSMISSION: Type K57 Tuff Torq w/ Automatic Controlled Traction Pump Variable Displacement Axial Piston Motor Fixed Displacement Reversible Axial Piston Hydraulic Fluid 2.6 Qts (2.5 L) 10W30 CD Oil Differential Bevel Gear Type with Controlled Traction Axle Shaft Diameter .75 in Continuous Output Torque Rating 180 ft. lbs. Drawbar Rating 216 lbs. Maximum Weight on axle 673 lbs. Controlled traction bias 30 – 40 ft-lbs

Control Free Wheel Lever

Foot Control Side by Side– Infinitely Variable Standard at back of tractor

Speeds Forward Reverse

0 – 5.8 MPH (0 – 9.3 km/h) 0 – 3.5 MPH (0 – 5.6 km/h)

CHASSIS: Frame Bumper Front Axle Front Spindle Dia

10 Gauge Welded (3.5mm) Steel Cast Iron 25 mm (1”)

TIRES: Rear Wheels Front Wheels Front Wheel Bearings

22 x 10.00-10 4-ply 15 x 6.00 – 6 4-ply Ball Bearing

Tire Pressure Rear Front

6-8 psi (41-55 kPa) 15-20 psi (103-138 kPa)

HOOD:

SEAT: Height Seat Adjustment Suspension Pitch adjustment Armrests

4 piece steel Tips forward for easy access to engine

15 in Super high back Quick adjust lever, 7 positions 2 position 3 position Optional

Simplicity Product Specifications

8/1/05

BROADMOOR/1600/2600 SERIES LAWN TRACTOR SPECIFICATIONS CONT.

DIMENSIONS: Overall Length Overall Width Height To top of Steering Wheel

70 in. (178 cm) 37 in. (94 cm)

Wheel Base

53 in. (132 cm)

43 in. (109 cm)

Weight (approx.) Tractor only Tractor/mower combination 18 hp w/ 38” Mower 18 hp w/ 44” Mower 20 hp w/ 44” Mower 20 hp w/ 50” Mower

470 lbs (213 kg) 570 580 580 591

lbs lbs lbs lbs

(259 (263 (263 (268

kg) kg) kg) kg)

Shipping Weight (approx.) Tractor only

580 lbs (263 kg)

Tractor/mower combination 18 hp w/ 38” Mower 18 hp w/ 44” Mower 20 hp w/ 44” Mower 20 hp w/ 50” Mower

800 814 800 802

8/1/05

lbs lbs lbs lbs

(363 (369 (363 (364

kg) kg) kg) kg)

Simplicity Product Specifications

BROADMOOR/1600/2600 SERIES LAWN TRACTOR SPECIFICATIONS CONT.

MOWER DIMENSIONS 38” MOWER Mower Housing Effective Cutting Width Overall Width with Deflector Overall Width with Turbo Variable Cutting Ht. Blade Arrangement Mower Drive Spindle Bearings

12 Ga. 38 in (96.5 cm) 49.5 in (125.7 cm) 51.5 in (131 cm) 1.25 – 3.75 in (3.1 to 9.5 cm) Two Blades V-Belt From Tractor Engine PTO Electric Clutch Lubricated and Sealed Ball Bearings Lube Fitting Provided

Weight

100 lbs. (45 kg)

44” Mower Mower Housing 12 ga (2.7 mm) Effective Cutting Width Overall width with Deflector Overall width with Turbo

44 in. (111.8 cm) 56 in. (142.2 cm) 58 in. (147 cm)

Variable Cutting Ht. Blade Arrangement Mower Drive Spindle Bearings

1.25-3.75 in. (3.1 – 9.5 cm) Three Staggered Blades V-Belt From Tractor Engine PTO Electric Clutch Lubricated and Sealed Ball Bearings Lube Fitting Provided

Weight

112 lbs. (51 kg)

Simplicity Product Specifications

8/1/05

BROADMOOR/1600/2600 SERIES LAWN TRACTOR SPECIFICATIONS CONT. 50” Mower Mower housing Effective Cutting Width Overall Width with Deflector Overall Width with Turbo

12 50 62 64

Variable Cutting Ht. Blade Arrangement Mower Drive Spindle Bearings

1.25-3.75 in. (3.1 – 9.5 cm) Three Staggered Blades V-Belt From Tractor Engine PTO Electric Clutch Lubricated and Sealed Ball Bearings Lube Fitting Provided 125 lbs. (57 kg)

Weight

ga (2.7 mm) in (127 cm) in (157.5 cm) in (162.5 cm)

DIMENSIONS WITH ATTACHMENTS:

Cab Tractor height w/ Snow Cab

70 in (173 cm)

42” Single-Stage Snowthrower Clearing Width Tractor length with Snowblower Tractor length with Snowblower and Rear weights

42 in. (107 cm) 99 in. (251 cm) 110 in. (279 cm)

46” Single-Stage Snowthrower Clearing Width Tractor length with Snowblower Tractor length with Snowblower and Rear weights

46 in. (117 cm) 99 in. (251 cm) 110 in. (279 cm)

42” Two-Stage Snowthrower Clearing Width Tractor length with Snowblower Tractor length with Snowblower and Rear weights

8/1/05

42 in. (107 cm) 108 in. (274 cm) 119 in. (302 cm)

Simplicity Product Specifications

BROADMOOR/1600/2600 SERIES LAWN TRACTOR SPECIFICATIONS CONT. 42” Dozer Blade Clearing Width Maximum Dozing Angle Tractor Length w/ Dozer blade Tractor Length w/ Dozer blade and rear weights

Weight Carriers Front

42 in. (107 cm) 30 degrees 94 in (239 cm) 108 in (274 cm)

Accepts a maximum of (3) 33 lb Suitcase Weights or (2) 50 lbSuitcase Weights Accepts a maximum of (3) 33 lb Suitcase Weights or (2) 50 lb Suitcase Weights

Rear

Two Bag Collector (38"/44”/50” mower) Bushel Capacity Estimated Weight Capacity Top Shell Construction Bag Construction Estimated Full Weight (incl. Collector) Front Counterweight Required Tractor length with catcher Tractor length with catcher and front weights

6.5 120 lbs. High Density Polyethylene 100% Polyester 170 lbs. 66 lbs. 98 in (249 cm) 109 in (277 cm)

Triple Collector (44”/50” mower) Bushel Capacity Estimated Weight Capacity Top Shell Construction Bag Construction Estimated Full Weight (Incl. Collector) Front Counterweight Required Tractor length with catcher Tractor length with catcher and front weights

10 180 lbs. High Density Polyethylene 100% Polyester (Hard Containers Optional) 250 lbs. 100 lbs. 98 in (249 cm) 109 in (277 cm)

WIDE BODY CART Centerline of hitch pin holes to farthest point in rear of cart Width of cart Height of cart

40.5” 46” 41.5”

Simplicity Product Specifications

8/1/05

CURRENT ATTACHMENTS BACK-FIT MATRIX FOR LANDLORD/1800/2800 AND PRE-2002 BROADMOOR/1600/2600

1693754 1691986 1692125 1694153

Fitment to Landlord

Fitment to Pre -2002 Broadmoor

Fits as is Fits as is Fits as is

Will Fits Will Will Fits Fits Fits Will Will

1694389 1694154 1693681 1692884 1692885 1693707 1694147 1694036

1694037

Mower, 44” Rotary

Fits if both upstops are removed

1694267 1694152 1694295, 1694144 1694296, 1694150 1694146 1694151 1694192 1694304 1694305 1694306 1694164

Quad Bagger Dump Cart Snow Cab (Soft Side)

Will not fit Will not fit

Will not fit Fits as is Will not fit Fits as is Fits as is Fits as is Will not fit Will not fit Fits if both belt guides are replaced w/ p/n 1704099 Fits if both upstops are removed and RH upstop replaced with p/n 1704098 Will not fit Will not fit

Single-Stage Snow – 42”

Will not fit

Single-Stage Snow – 46” Subframe Tiller, 36” Single Point Hitch, Rear Turbo (For 38”, 44” & 50” Mower) Turbo mtg kit (38” Mower) Turbo mtg kit (44” Mower) Turbo Quad Bagger (For 44”, 50” & 54” Mower) Weight, Rear Wheel (1 Each) Weight Carrier, Rear Weight Carrier, Front Weight, Suitcase 50 lb. Weight, Suitcase 33 lb. Wide Body Cart & Hitch (17 bu. Incl. Cover/Tube) Two-Stage 42” Snowthrower – (SEE PRESTIGE DESCRIPTION) Clean Sweep 38” Mower Dethatcher Adapter Kit – Dethatcher

Will not fit Will not fit Will not fit Will not fit Fits as is Will not fit Fit as is Will not fit

Will not fit Will not fit Will not fit Will not fit Fits as is Fit as is Fit as is Will not fit

Fits Fits Will Fits Fits

Will Will Will Fits Fits

1693160 1694312 1694155 1692939 1691319 1694163 1694238 1694308 1690819 1694332

8/1/05

not fit as is not fit not fit as is as is as is not fit not fit

as is as is not fit as is as is

not fit not fit not fit as is as is

Will not fit

Will not fit Fits as is Will not fit

Fits as is Fits as is Will not fit

Simplicity Product Specifications

2002/2003 UP-FIT OF PRIOR MODEL ATTACHMENTS TO NEW BROADMOOR/1600/2600

1693754 1691986 1692125 1691791 1693501 1693481 1690819 1692679 1692884 1692885 1693756 1692682 1692684 1693267 1693107 1692807 1691522

Blade, 42” Dozer Cart, Dump (6.5 cu. Ft.) Cart, Dump (10 cu. Ft.) Catcher, Turbo Clean Sweep Twin Catcher, Clean Sweep Triple Catcher, Hitch & Tube Group Dethatcher, Lawn, 35” Dethatcher Adapter Grass Mulcher Kit, 44” Grass Mulcher Kit, 50” Hitch (For 42” Blade) Mower, 38” Rotary Mower, 44” Rotary Mower, 50” Rotary Quad Bagger Dump Cart Snow Cab Single-Stage Snowthrower, 42”

1693892 1692041 1693869 1693869 1693743 1691837 1690555 1692625 1692742 1693271 1693443 1692939 1691319 1693744

Two-Stage Snowthrower, 40” Snowthrower Hitch, Manual Lift Tractors Turbo (For 44” Mower) Turbo (For 38” Mower) Turbo Quad Bagger (For 44, 50 & 54” Mower) Weight, Front Counter Weight, Rear Wheel (1 Each) Weight Weight Carrier, Rear Weight Carrier, Rear Weight Carrier, Front Weight, Suitcase 50 Lb. Weight, Suitcase 33 Lb. Wide-Body Cart & Hitch (17 bushel)

1693270

Weight Carrier, Rear

Simplicity Product Specifications

Fitment to 2003 Broadmoor Requires 1694146, 1694147 Fits as is Fits as is Requires kit #1686889 & Turbo Requires kit #1686890 & Turbo Will not fit Requires 1694332 Will not fit Fits as is Fits as is Will not fit Will not fit Will not fit Will not fit Requires 1723883, 1723884 & 1723885 Will not fit Fits as is Requires 1692041 hitch and #1686886 Will not fit Requires kit #1686886 Requires 1694306 Will not fit Fits as is Will not fit Fits as is Will not fit Will not fit Will not fit Will not fit Fits as is Fits as is Requires 1723883, 1723884 & 1723885 & Turbo Will not fit

8/1/05

NEW REGENT/500/2500 SERIES LAWN TRACTOR SPECIFICATIONS 18H 2518H

20H 520H 2520H

22H 522H 2522H

24H 524H 2524H

ENGINE: Make

Kohler

Briggs & Stratton

Model

Courageâ&#x201E;˘

Intek

Horsepower

18 @ 3600 rpm

20 @ 3600 rpm

22 @ 3600 rpm

24 @ 3600 rpm

3500 rpm

Low Idle (no load)

1750 rpm

Cylinder

Bore

3.54 in. (90 mm)

3.12 in. (79 mm)

Stroke

3.0 in (77 mm)

2.89 in (73 mm)

Displacement

32.6 Cu. In (535 cc)

30.5 Cu. In (500 cc)

40.0 Cu. In (656 cc)

44.0 Cu. In (722 cc)

Construction

Overhead Valve, Cast-Iron Sleeve, Aluminum Crankcase

Electrical System 12 Volt, 15 amp. Alteranator Regulated

12 Volt, 9 amp. Alternator Regulated

Battery

230 cca 23 Minute Reserve

Ignition

Electronic Ignition

Starter

Industrial Rated

Air Cleaner

Ducted Paper Cartridge and Foam Pre-cleaner

Oil Capacity

51.1 Oz. W/Filter (1.9 L)

64 Oz. W/filter (1.7 L)

Lubrication

Full Pressure Lube w/Oil Filter

Muffler

Quiet Compact, Low Back Pressure

Engine rated speeds Fast Idle (no load)

8/1/05

Simplicity Product Specifications

NEW REGENT/500/2500 SERIES LAWN TRACTOR SPECIFICATIONS CONT. STEERING: Type Steering Wheel Turning Radius

Gear and Sector, 1.5 turns lock to lock 13.5” Diameter Inside Rear Tire: 14 in (36 cm)

CONTROLS: Ground Speed Control Clutch/Brake Pedal Parking Brake Lever Mower lift Throttle/Choke Cruise Control

Foot Pedal – Side by Side Depress to apply brake & declutch transmission On dash – raise to engage parking brake Manual control located on right pod Side by Side (Located on Dash) Adjustable latch design – lift to engage

Switches Ignition PTO RMO Headlight 12 Volc D.C. Outlet Spout Rotator

3 position Indak Yellow button – pull up to engage clutch Key switch Activated Rocker type Sandard – L.H. POP (Optional on 18hp) Optional – use with snow attachments

Left Pod Cupholder Storage Container

Standard Standard

Pods Hand Grips

Integrated into pods

Simplicity Product Specifications

8/1/05

NEW REGENT/500/2500 SERIES LAWN TRACTOR SPECIFICATIONS CONT. Electrical System: Ignition Type of starter Charging system Battery type Battery voltage Battery reserve capacity Battery cold cranking amp @ 0째 F 12 Volt accessory outlet

Electronic Briggs & Kohler - Industrial Starter 9 amp Regulated Wet 12 Volt 23 min. 230 cca

Safety Interlock system

Standard

Headlights: Bulbs

(2) 27 Watt Incandescent Bulbs

Instrumentation (Briggs & Kohler models): Fuel Level Window Hourmeter

In front of Seat Deck Standard (Optional on 18hp only)

Fuel System: Fuel tank material Fuel fill location Fuel tank capacity Fuel Fuel pump location Fuel pump type Fuel filter

Non-Corrosive Polyethylene Left Rear 3.5 US Gal. Reg. Unleaded Engine Mounted Mechanical Standard Replaceable

8/1/05

Simplicity Product Specifications

NEW REGENT/500/2500 SERIES LAWN TRACTOR SPECIFICATIONS CONT. 18 w/38 20 w/38

22 w/44 24 w/50

K46BP Tuff Torque

K46HD Tuff Torque

Variable Displacement Axial Piston Fixed Displacement Reversible Axial Piston 2.3 Qts 10W30 CD Oil Bevel Gear .75 in 170 ft. lbs. 217 lbs. 673 lbs.

Variable Displacement Axle Pistol Fixed Displacement Reversible Axle Pistion 2.3 Qts 10W30 Cd Oil Bevel Gear .75 in 170 ft. lbs. 197 lbs. 673 lbs.

Foot Control Side by Side– Infinitely Variable Standard at back of tractor

Foot Control Side by Side – Infinitely Variable Standard at back of tractor

Speeds Forward Reverse

0 – 5.5 MPH (0 – 8.8 km/h) 0 – 3.0 MPH (0 – 4.8 km/h)

CHASSIS: Frame Front Axle Front Spindle Dia

12 Gauge Steel Cast Iron 3/4"

TIRES: Rear Wheels Front Wheels

20 x 8-8 2-ply 15 x 6.00 – 6 2-ply

22 x 10-8 2 ply 15 x 6.0-6 2 ply

Tire Pressure Rear Front

6-8 psi (41-55 kPa) 15-20 psi (103-138 kPa)

4 piece steel Tips forward for easy access to engine

15 in Super high back Quick adjust lever, 9 positions

TRANSMISSION: Type Pump Motor Hydraulic Fluid Differential Axle Shaft Diameter Continuous Output Torque Rating Drawbar Rating Maximum Weight on axle

Control Free Wheel Lever

HOOD:

SEAT: Height Seat Adjustment

Simplicity Product Specifications

8/1/05

NEW REGENT/500/2500 SERIES LAWN TRACTOR SPECIFICATIONS CONT.

DIMENSIONS: Overall Length Overall Width Height: To top of Steering Wheel

71 in. (180 cm) 37 in. (94 cm)

Wheel Base

50 in. (127 cm)

45 in. (114 cm)

Weight (approx.) Tractor only Tractor/mower combination 18 hp w/ 38” Mower 20 hp w/ 38” Mower 22 hp w/ 44” Mower 24 hp w/ 50” Mower

430 lbs (195 kg) 502 520 552 585

lbs lbs lbs lbs

(227 (236 (250 (265

kg) kg) kg) kg)

600 620 650 690

lbs lbs lbs lbs

(272 (281 (294 (313

kg) kg) kg) kg)

Shipping Weight (approx.) Tractor/mower combination 18 hp w/ 38” Mower 20 hp w/ 38” Mower 22 hp w/ 44” Mower 24 hp w/ 50” Mower

8/1/05

Simplicity Product Specifications

NEW REGENT/500/2500 SERIES LAWN TRACTOR SPECIFICATIONS CONT.

MOWER DIMENSIONS 38” MOWER Mower Housing Effective Cutting Width Overall Width with Deflector Variable Cutting Ht. Blade Arrangement Mower Drive Spindle Bearings

12 Ga. 38 in (96.5 cm) 49.5 in (125.7 cm) 1.5 – 4 in (3.8 - 10.2 cm) Two Blades V-Belt From Tractor Engine PTO Electric Clutch Lubricated and Sealed Ball Bearings Lube Fitting Provided

Weight

100 lbs. (45 kg)

44” Mower Mower Housing Effective Cutting Width Overall width with Deflector

12 ga (2.7 mm) 44 in. (111.8 cm) 52" (132.1 cm)

Variable Cutting Ht. Blade Arrangement Mower Drive Spindle Bearings

1.5 - 4 in. (3.8 – 10.2 cm) Three Staggered Blades V-Belt From Tractor Engine PTO Electric Clutch Lubricated and Sealed Ball Bearings Lube Fitting Provided

Weight

112 lbs. (51 kg)

Simplicity Product Specifications

8/1/05

NEW REGENT/500/2500 SERIES LAWN TRACTOR SPECIFICATIONS CONT. 50” Mower Mower housing Effective Cutting Width Overall Width with Deflector

12 ga (2.7 mm) 50 in (127 cm) 58 in (147.3 cm)

Variable Cutting Ht. Blade Arrangement Mower Drive Spindle Bearings

1.5 - 4 in. (3.8 – 10.2 cm) Three Staggered Blades V-Belt From Tractor Engine PTO Electric Clutch Lubricated and Sealed Ball Bearings Lube Fitting Provided 125 lbs. (57 kg)

Weight

DIMENSIONS WITH ATTACHMENTS: Cab Tractor height w/ Snow Cab

72 in (173 cm)

42” Single-Stage Snowthrower Clearing Width Tractor length with Snowblower Tractor length with Snowblower and Rear weights

8/1/05

42 in. (107 cm) 93 in. (236 cm) 110 in. (279 cm)

Simplicity Product Specifications

NEW REGENT/500/2500 SERIES LAWN TRACTOR SPECIFICATIONS CONT. 42” Snow Blade Clearing Width Maximum Dozing Angle Tractor Length w/ Dozer blade Tractor Length w/ Dozer blade and rear weights

42 in. (107 cm) 25 degrees 93 in (236 cm) 110 in (279 cm)

Weight Carriers Rear

Accepts a maximum of (2) 33 lb Suitcase Weights or (2) 50 lb Suitcase Weights

Two Bag Collector (38" mower) Bushel Capacity Estimated Weight Capacity Top Shell Construction Bag Construction Estimated Full Weight (incl. Collector) Front Counterweight Required Tractor length with catcher

6.5 120 lbs. High Density Polyethylene 100% Polyester 170 lbs. 66 lbs. 95 in (241 cm)

10 180 lbs. High Density Polyethylene 100% Polyester (Hard Containers Optional) 250 lbs. 100 lbs. 95 in (241 cm)

Simplicity Product Specifications

8/1/05

CURRENT ATTACHMENTS BACK-FIT MATRIX FOR REGENT/500/2500 (2005 Model Year & Prior) Fitment to Regent 500/2500 1693754 1692125 1692620 1692621 1690163 1692883 1692884 1693755 1693792 1693795 1692629 1691522 1694304 1693976 1690555 1692636 1691837 1692939 1690555 1690819 1692679

8/1/05

Blade, 42” Dozer Cart, Dump (10 cu. Ft.) Catcher, Clean Sweep Twin Catcher, Clean Sweep Twin Turbo Chains, Tire, Pr. (20 x 10 - 10) Grass Mulcher Kit, 38” Grass Mulcher Kit, 44” Hitch (for 42” blade) Mower, 38” Rotary Mower, 44” Rotary Snow Cab Single-Stage Snow – 42” Turbo (For 38” Mower) Turbo mtg kit (44” Mower) Weight, Rear Wheel (1 Each) Weight Carrier, Rear Weight Carrier, Front Weight, Suitcase 50 lb. Weight, Suitcase 33 lb. Dethatcher Dethatcher Adapter Kit

Will Fits Will Will Fits Fits Will Will Will Will Will Will Will Will Fits Will Will Fits Fits Will Will

not fit as is not fit not fit as is as is not fit not fit not fit not fit not fit not fit not fit not fit as is not fit not fit as is as is not fit not fit

Simplicity Product Specifications

CORONET/2400 SERIES RIDING MOWER SPECIFICATIONS

13H 2413H

16H

ENGINE:

Make Model Horsepower Cylinder Bore Stroke Displacement Construction

Electrical System Alternator

Kohler Commandâ&#x201E;˘ CV460 16 HP @ 3400 rpm 1 3.42 in (87 mm) 3.03 in (77 mm) 27.9 Cu. In (426 cc) Overhead Valve, Cast-Iron Sleeves Aluminum Crankcase Starter: 12 Volt Electric w/Key Switch Alternator: 15 Amp, Regulated

Ignition

High Energy Electronic Ignition

Air Cleaner

Ducted Paper Cartridge and Foam Pre-cleaner

Pre-Cleaned Air To Paper Filter

Lubrication

Full Pressure Lube w/Oil Filter

Splash Lube

Oil Capacity

4 Pints w/Filter (1.9 L)

3 Pints (1.42 L)

Muffler

Quiet Compact, Low Back Pressure

Battery

12-Volt, 230 Cold Cranking amps w/ 23 min reserve capacity

Fuel Tank Cap.

2 Gal. (7.57 L)

Simplicity Product Specifications

Briggs & Stratton Intek OHV Series 13 HP @ 3400 rpm 1 3.44 in (87 mm) 2.26 in (57 mm) 21 Cu. In (344 cc) Overhead Valve, Cast-Iron Sleeves Aluminum Crankcase Starter: 12 Volt Electric w/Key Switch Alternator: 3 Amp, DC Unregulated (Flywheel) Electronic; Solid-State, Maintenance Free

8/1/05

CORONET/2400 SERIES RIDING MOWER SPECIFICATIONS CONT. TRANSMISSION: Hydro Type Differential Speeds @ 3400 rpm Hydraulic Fluid Axle Shaft Continuous Output Torque

Hydro Gear Hydrostatic, 0510 Bevel Gear Type Infinite Forward: 0-5.0 MPH (0-8.0 km/h) Reverse: 2.3 MPH (3.7 km/h) 20w 50, Non-synthetic Oil, Factory Sealed .75 in 160 ft. lbs. (217N-m)

Drawbar Rating Maximum Weight on axle

216 lbs. 620 lbs. (281 Kg)

CHASSIS: Frame Front Axle Seat Deck Seat Footrest Front Wheels: Type Tread Size Inflation Press. Rear Wheels Type Tread Size Inflation Press. Turning Radius Inside Rear Wheel CONTROLS: Clutch/Brake Pedal Parking Brake Steering Type

Heavy 14-Gauge, Deep Drawn Steel Formed Steel Lightweight Polymer Alloy 13â&#x20AC;? High Back, Molded Type w/Foam Cushion w/Spring Suspension, Quick Adjust Molded Rubber Foot Rests Pneumatic Tubeless (4-ply rating) Turf Pattern 13 x 5.00-6 10-12 psi (68-82 kPa) Pneumatic Tubeless (4-ply rating) Turf Pattern 16 x 6.50-8 10-12 psi (68-82 kPa) 12 in (30.2 cm)

Combination Clutch/Brake Dash Mounted Gear & Sector, 1.25 turns Lock to Lock

Speed Control Throttle Control on right Seat Deck Key Switch Mower Cutting Height

Off-On Switch on right seat deck 1-3.75 in (2.54-9.53 cm ) Infinite Dial-A-Cut on dash

PTO

Electric-Warner Electric

RMO

Key switch Activated on right Seat Deck

Tool box w/cupholder

Left Seat Deck

8/1/05

Dash Mounted Combination Speed and Choke Control

Simplicity Product Specifications

CORONET/2400 SERIES RIDING MOWER SPECIFICATIONS CONT. DIMENSIONS: Height at: Steering Wheel Seat Back Engine Cover Length: Length Overall Width: w/o Mower w/ 30” Mower w/ 34” Mower at Rear Wheels Wheel Base Weight Hydro w/ 30” Mower (approx.): Net Shipping Weight Hydro w/ 34” Mower (approx.): Net Shipping

41 in (104.1 cm) 41.5 in (105.4 cm) 28 in (71.1 cm) 61 in (155 cm) 33 in (83.8 cm) 38.5 in (97.8) 45.5 in (115.6 cm) 33 in (83.8 cm) 43 in (109.2 cm)

415 lbs. (187 kg) 533 lbs. (242 kg) 446 lbs. (203 kg) 566 lbs. (257 kg)

MOWER DIMENSIONS 30” MOWER Type Width of Cut Height of Cut Cutting Positions Spindles Mounting Mower Drive

30 in: Single Blade 30 in (76.2 cm) 1 in to 3.75 in (2.54 to 9.53 cm) Infinite (Exclusive Dial-A-Cut™ Control) Sealed Ball Bearings – Lube Fitting Provided At Front Axle, Quick Hitch w/Auto Leveler™ V-Belt from Tractor Engine PTO Electric Clutch

34” MOWER Type Width of Cut Height of Cut Cutting Positions Spindles Mounting Mower Drive

34 in: Two Blade 34 in (86.4 cm) 1 in to 3.75 in (2.54 to 9.53 cm) Infinite (Exclusive Dial-A-Cut™ Control) Sealed Ball Bearings – Lube Fitting Provided At Front Axle, Quick Hitch w/Auto Leveler™ V-Belt from Tractor Engine PTO Electric Clutch

Simplicity Product Specifications

8/1/05

NEW JAVELIN ZERO TURN SERIES SPECIFICATIONS 20/38

20/44

20/50

Engineering Part Number

2690476

2690475

2690474

Model Name

Javelin

Engine Manufacturer

Kohler

Briggs & Stratton

Engine Part Number

7100203

1729722

1730220

Model Number

Power:

PS-SV600S-0017

441577 0118 B1

441777 0117 B1

Horsepower/Engine Type

20hp Courageâ&#x201E;˘ OHC

20hp Intek V-Twin OHV

22hp Intek V-Twin OHV

Engine Configuration

1-Cyl OHC w/ oil filter

V-Twin, OHV, w/ oil filter

V-Twin, OHV w/ oil filter

Engine Spec Number

36.4 / 597

40.04 / 656

44.26 / 725

12V / 15 Amp DC

12V / 9 AMP DC

12V/ 9 AMP DC

Extended Hose

Oil Dip Stick Cap Color

Yellow

Blower Housing Color

Black

Yes

Engine Displacement (cu. in./cc) Electrical System Oil Drain

Spin-on Oil Filter

Electric

Fuel Tank Capacity

3 Gallons

Fuel Gauge

Tank View

Tank view

Starter

12V / 230 CCA

EPA Compliant Engine

Yes

EC Compliant/ 'CE Mark'

Make

Hydro Gear

Type

EZT

Planetary Gear Reduction

0-6 / 0-3

Mechanical Gear

Battery Capacity

Transmission:

Final Drive Ground Speed: Fwd/Rev (MPH) Brakes Controls/Instrumentation: Steering Control Design

Twin Stick

Contoured Levers / Foam Grips

Hour Meter

Standard Equipment

Park Brake

Integrated into Levers

Integrated into Levers Manual / Lift Handle w/Foot assist

Manual / Lift Handle

Deck Height

6 position adj.

6 positions adj.

6 position adj.

Blade Engage

Electric Switch

w/ Separate Choke

Deck Lift/Type

Throttle Other Features:

Standard

Michigan / Black

Armrests

Yes

Quiet Muffler w/Guard

Yes

Pivoting / Cast Iron

Pivoting / Casting Iron

Pivoting / Cast Iron

Standard / Spring

Steel

Quick attach deck

Standard

12V DC Plug-in

Standard

Blade Clutch

Ogura JD-11

Rear Bumper

Service Parts Decal

Yes

Decal Package

New

Zero Turning Capability Seat/Color

Front Axle/Material Seat Suspension Floor Plan w/foot rest

8/1/05

Simplicity Product Specifications

NEW JAVELIN ZERO TURN SERIES SPECIFICATIONS (Conâ&#x20AC;&#x2122;t) Model Number

20/38

20/44

20/50

Engineering Part Number

2690476

2690475

2690474

Model Name

Javelin

Yes / 7078022

Front

11.00 x 4.00 - 4 Smooth

Rear

18.00 x 6.50 / Turf Saver

18.00 x 8.50 / Turf Saver

Yes / 1692883

Yes / 1692884

Yes / 1692885

OPEI Member Decal / PN Tires:

Accessories: Mulching Kit Twin Bag Grass Collector

Yes

Triple Bag Grass Collector

Yes

Dump Cart

1692125

1692126

Headlights

Yes

Residential Use

2 / 2 - Years Ltd.

Commercial Use

90 Days / 1 Year - Ltd.

90 Days / 1 Year Ltd.

Side Discharge Only

Warranty: Machine / Engine

Mower Deck: Mower Configuration in Crate Width of Cut # of Blades / Type Cutting Height

38"

44"

50"

2 Std. Lift

3 Std. Lift

1.5" - 4"

Cutting Positions

Deck Suspension

Frame Hung

Yes

Plastic / Pivoting

Length-Overall (in.)

72"

Width-Overall (in.)

49"

55"

61"

Height-Overall (in.)

38"

Wheel Base (in.)

48"

Wheel Stance / Rear (in.)

38"

42"

550

590

620

Full Length Rear Roller Discharge Deflector Dimensions:

Turning Radius (in.) Weight (approx.) (lbs.) Shipping Weight (approx.) Shipping Contain Size

775

815

845

82" x 54" x 48.5"

82" x 60" x 48.5"

Simplicity Product Specifications

8/1/05

CHAMPION ZERO TURN SPECIFICATIONS Model Number Engineering Part Number Model Name

ZT 20/44 2690449 Champion

ZT 20/50 2690451 Champion

Kohler SV600 20hp / Courage OHC Vertical Shaft / 1 - Cylinder OHC F.P.L. w/ Spin-on Oil Filter 12V / 15 AMP DC Hose Black Horizontal / Below Frame Standard Electric 12V / 340 CCA Yes Yes

Briggs & Stratton 358777 0280-E1 20hp Vanguard V-Twin OHV Vertical Shaft / 2-Cylinder OHV 34.80 / 570 F.P.L. w/ Spin-on Oil Filter 12V / 16 AMP DC Hose Black Horizontal / Below Frame Standard Electric 12V / 340 CCA Yes Yes

Pumps and Wheel Motors Hydro-Gear 10A pump Hydro-Gear HGM-12P 0-7 mph / 0-5 mph Synthetic Oil 1 Quart Yes Drum

Twin Stick Separate Levers Manual Lift Handle 7 Positions with Transport Electric Switch Ogura Manual Lever Yes

Twin Stick Separate Levers Manual Lift Handle 7 positions with transport Electric Switch Ogura Manual Lever Yes

Standard Milsco XB150 - 15" / Black Yes Seat Springs / 5 Positions 6.5 Gallon Yes Yes Molded Plastic Mid-Mount Steel Standard Equipment Standard Equipment Roller Bearings 1" x 2" Tube 10 Gauge Standard Equipment Yes

Power: Engine Manufacturer Engine Spec Number Horsepower/Engine Type Engine Configuration Engine Displacement (cu. in./cc)

Engine Lubrication Electrical System Oil Drain Blower Housing Color Muffler Quiet Muffler Starter Battery Capacity CARB Compliant Engine EPA Compliant Engine Transmission: Type Pump - Make/Model Final Drive - Make/Model Fwd Speed/Rev Speed (MPH) Hydro Oil Hydro Oil Tank Capacity Hydro Oil Filter Brakes Controls/Instrumentation: Steering Throttle & Choke Deck Lift Deck Height Blade Engage Blade Clutch Park Brake Hour Meter Other Features: Zero Turning Capability Seat/Color Armrests Cushioned Seat Suspension Fuel Tank Capacity Fuel Gauge Cup Holder Rear Fenders Deck Position Floor Plan w/ Foot Rest Pivoting Front Axle 360 Front Casters Front Wheel Bearings Frame Structure Steel Frame Gauge Rear Bumper / Engine Protector Service Parts Decal

8/1/05

Simplicity Product Specifications

CHAMPION ZERO TURN SPECIFICATIONS (Conâ&#x20AC;&#x2122;t) Model Number

ZT 20/44

Engineering Part Number

2690449

2690451

Champion

Model Name

ZT 20/50

Tires: Front

11.00 x 4.00 - 5

Drive

20 x 8 - 10 (4-Ply)

Manufacturer

Carlisle / Multi-trac

Silver

Mulching Kit

1692884

1692885

Trailer Hitch Attachment

5600031

Triple Bag Grass Collector

Yes / 1694499 & 1692939(3)

Twin Bag Grass Collector

Yes / 1694498 &1691319(2)

Yes / 1694304

Residential Use

2 / 2 - Years Ltd.

Commercial Use

1 / 2 Years - Ltd.

Side Discharge Only

44"

50"

Wheel Rim Color Accessories:

Turbo Vac Blower ROPS Warranty: Machine / Engine

Mower Deck: Mower Configuration in Crate Width of Cut # of Spindles / Material

3 / Steel

Ball Bearings

Standard

3 / Standard Lift

1.50-4.50"

Cutting Positions

Anti Scalp Wheels

4-Point / 3-Position Adjustable

Deck Suspension

Frame Hung

Width w/ Deflector

55"

61"

Plastic/Pivoting

Length-Overall (in.)

78"

Width-Overall (in.)

55"

61"

Height-Overall (in.)

42"

WheelBase (in.)

48"

Spindle Bearing Type Spindles w/ Grease Fitting # of Blades / Type Cutting Height

Discharge Deflector Dimensions:

Turning Radius (in.)

Weight (approx.) (lbs.)

650

670

Shipping Weight (approx.)

905

925

86" x 60" x 35"

Shipping Container Size

Simplicity Product Specifications

8/1/05

CITATION ZERO TURN (ZT) RIDING MOWER SPECIFICATIONS ZT 21

ZT 23

Make Model Horsepower Cylinder Bore Stroke Displacement Construction

Briggs & Stratton Vanguard™ V-Twin 21 HP 1 2.97 in. (90 mm) 2.75 in. (77 mm) 38.26 cu. in. (627 cc) Overhead Valve, Cast-Iron Sleeve Aluminum Crankcase

Briggs & Stratton Vanguard™ V-Twin 23 HP @ 3400 rpm ± 100 rpm 2 2.97 in. (72 mm) 2.75 in. (70 mm) 38.26 cu. in. (627 cc) Overhead Valve, Cast-Iron Sleeve, Aluminum Crankcase

Muffler

Quiet Compact, Low Back Pressure

Lubrication Oil Capacity

16 amp Regulated 340 Cold Cranking amps, 41 Min. Reserve Industrial Rated Starter Motor Electronic Ducted Paper Cartridge and Foam Pre-cleaner Full Pressure Lube w/ Oil Filter 56 oz. w/filter (1.7 L)

16 Amp Regulated 340 Cold Cranking amps, 41 Min. Reserve Industrial Rated Starter Motor Magnetron Electronic Ignition Ducted Paper Cartridge and Foam Pre-cleaner Full Pressure Lube w/ Oil Filter 56 oz. w/filter (1.7 L)

Fuel Fuel Fuel Fuel Fuel Fuel Fuel

6.5 Gal. (24.6L) High Density Cross Linked Polyethylene Left tank Reg. Unleaded Engine Mounted Mechanical Standard Replaceable

6.5 Gal. (24.6L) High Density Cross Linked Polyethylene Left and Right tank Reg. Unleaded Engine Mounted Mechanical Standard Replaceable

ENGINE:

Electrical System Alternator Battery Starter Ignition Air Cleaner

capacity tank material: fill location pump location pump type filter

8/1/05

Simplicity Product Specifications

CITATION ZERO TURN (ZT) RIDING MOWER SPECIFICATIONS CONT. TRANSMISSION: Type

Pump & Wheel Motor

Pump Motor Hydraulic Fluid

HydroGear BDP-10A HydroGear HGM-12C Castrol Syntec 5W-50 Fluid - External Reservoir

Speed Range

Forward: 0 – 10 mph (0 - 16.0 km/h) Reverse: 0 - 6 mph (0 - 9.7 km/h) Wheel Motor 1 in. Tapered Shaft 266 ft. lb.

Final Drive Axle Shaft Continuous Output Torque Rating Pump Continuous Oil Flow @3600 RPM Continuous Operating Pump Pressure 9.2 GPM (34.8 l/min) 1000 psi Maximum Weight on axle 2000 lbs/side CHASSIS: Frame Rear Tires Front Tires Seat Turning Radius PTO Engagement

10-Gauge Engine Frame w/ 1.5” X 2” X 10-Gauge Tubular supports 22 X 11 - 10 (4ply) 13 x 5 - 6 15" High-Back, Molded Type w/Foam Cushion, Armrests Zero Ogura Electric Clutch

SUSPENSION: Front Rear

Axle mounted shocks with adjustable spring rate Two shocks with adjustable spring rate

CONTROLS: Steering

Brakes Parking Brake Location

Directional Control Levers One Per Transmission for Speed and Direction External – Band – Dry Right side lever

ROPS (Roll over protection structure)

Standard, Foldable

DIMENSIONS: Overall Length Overall Width Height Height w/ROPS up Height w/ROPS folded Wheel Base Weight w/52" Mower (approx.) Weight w/48" Mower (approx.)

79.5 in. 46.0 in. 43.0 in. 69.50 in. 58.50 in 49.50 in. 970 lbs. 1000 lbs.

Simplicity Product Specifications

8/1/05

CITATION ZERO TURN (ZT) RIDING MOWER SPECIFICATIONS CONT.

MOWER DIMENSIONS 52” MOWER Mower Housing Effective Cutting Width Overall Width with Deflector Overall Width with Turbo

10 52 65 62

ga (3.4 mm) in. (132 cm) in. (165 cm) in. (157.5 cm)

Weight Variable Cutting Ht. Blade Arrangement Mower Drive Spindle Bearings

187 lbs. (85 kg) 1.75” - 5.00" (4.4 to 12.7 cm) Three Staggered Blades V-Belt From Tractor Engine PTO Electric Clutch Lubricated and Sealed Ball Bearings Lube Fitting Provided

48” MOWER: Mower Housing Effective Cutting Width Overall Width with Deflector Overall Width with Fast-Vac Turbo

10 48 61 59

Weight (approx.) Variable Cutting Ht. Blade Arrangement Mower Drive Spindle Bearings

160 lbs. 1.75" - 5.00" (4.4 to 12.7 cm) Three Staggered Blades V-Belt from Tractor Engine PTO Electric Clutch Lubricated and Sealed Ball Bearings Lube Fitting Provided

8/1/05

ga in. (122 cm) in. (155 cm) in. (1150 cm)

Simplicity Product Specifications

COBALT ZERO TURN (ZT) RIDING MOWER SPECIFICATIONS ZT 2761 ENGINE: Make Model Horsepower Cylinder Bore Stroke Displacement Construction

Kohler Command CV730 27HP @ 3600 rpm 2 3.3 in. (83 mm) 2.6 in. (67 mm) 44 cu. in. (725 cc) Overhead Valve, Cast-Iron Sleeve, Aluminum Crankcase

Muffler

Quiet Compact, Low Back Pressure

Electrical System Alternator Battery Starter Ignition Air Cleaner

15 Amp Regulated 340 Cold Cranking amps, 38 Min. Reserve Standard Solenoid Shift Electronic Ducted Paper Cartridge and Foam Pre-cleaner

Lubrication Oil Capacity

Full Pressure Lube w/ Oil Filter 2.1 qts. (2 L)

Fuel Fuel Fuel Fuel Fuel Fuel Fuel

9.0 Gal. (34 L) â&#x20AC;&#x201C; Two 4.5 Gal (17 L) tanks High Density Cross Linked Polyethylene Left and Right tank Reg. Unleaded Engine Mounted Mechanical Standard Replaceable

capacity tank material: fill location pump location pump type filter

Simplicity Product Specifications

8/1/05

COBALT ZERO TURN (ZT) RIDING MOWER SPECIFICATIONS CONT. TRANSMISSION: Type

Pump & Wheel Motor

Pump Motor Hydraulic Fluid

HydroGear BDP-10A Parker TF0280 Castrol Syntec 5W-50

Speed Range @ 3600 rpm Final Drive Axle Shaft Continuous Output Torque Rating

0-10mph (16.1 km/h) Forward

Pump Continuous Oil Flow @3600 RPM Continuous Operating Pump Pressure 1000 psi

CHASSIS: Frame Rear Tires Front Tires Front spindle diameter Seat Turning Radius PTO Engagement Headlights

0 – 5.0 mph (8.0 km/h) Reverse

Wheel Motor 1.25 in. Tapered Shaft 500 ft. lb.

9.2 GPM (34.8 l/min)

10-Gauge Engine Deck w/ 1-1/2” X 2-1/2” X 11-Gauge Frame Rails 22 x 11.00 - 10 13 X 5.00 – 6 semi-pneumatic smooth casters with tapered roller bearings 1.00 in. High-Back, Formed Steel Type w/Foam Cushion, Armrests, Quick Adjust Seat Sliders Zero Electric Standard; Two 50 watt oval lights mounted on front

Suspension

Standard- Front – Two shocks with adjustable spring rate Rear – Two shocks with adjustable spring rate

ROPS (Roll over protection structure)

Standard, Foldable

CONTROLS: Steering Brakes Parking Brake Location Mower lift Hourmeter Cupholder

8/1/05

Directional Control Levers One Per Transmission for Speed and Direction External – Disc – Dry Right side lever Footpedal lift – lifts in 1/2” increments from 1.5” – 4.75” (3.8 - 12.1 cm) Standard – mounted on LH control panel Standard – mounted on RH panel

Simplicity Product Specifications

COBALT ZERO TURN (ZT) RIDING MOWER SPECIFICATIONS CONT. DIMENSIONS: Overall Length Overall Width Height w/ROPS up Height w/ROPS folded Wheel Base Weight w/ 61” Mower (approx.)

84 in. 52 in. 69.50 in. 58.50 1n. 52 in. 1176 lbs.

MOWER DIMENSIONS 61” MOWER Mower Housing

Effective Cutting Width Overall Width with Deflector Overall Width with Fast-Vac Turbo

10-Gauge (3.43 mm) – Double top deck, double reinforced side skirts, overlap welded corners 61 in. (155 cm) 74 in. 74 in.

Weight Variable Cutting Ht. Blade Arrangement Mower Drive Spindle Bearings

285 lbs. 1-1/2” – 4-3/4” (3.8 - 12.1 cm) Three Staggered Blades V-Belt From Tractor Engine PTO Electric Clutch Lubricated and Sealed Ball Bearings

Simplicity Product Specifications

8/1/05

PACER WIDE AREA WALKER SPECIFICATIONS

PACER 1534 ENGINE: Make Model Horsepower Cycles Cylinders Bore Stroke Displacement Crankshaft Ignition Governor

Fuel Tank

Briggs & Stratton Intek OHV 15 4 1 with Cast-Iron Sleeve 3.44 in. (87.4 mm) 3.06 in. (77.7 mm) 34.8 cu. in. (570 cc) Vertical – 1.0 in. Diameter Flywheel Magneto with Key Switch Adjustable, Mechanical, Running in Oil Set to 3400 ± 100 rpm Single Control Electric Standard 12 Volt Electric Starter Lubrication: Splash System Capacity: 48 Oz. (1.4 L) Capacity: 4 Gallons (15.1 L)

Axle Rear Tires Front casters Front spindle Alternator

3/4 in. Solid 16 X 6.50 - 8 6X3 3/4 in. (19.1 mm) 9 AMP Regulated

FRAME: Construction

Heavy-Gauge Steel, Tubular Handles

Throttle/Choke Starter Crankcase

8/1/05

Simplicity Product Specifications

PACER WIDE AREA WALKER SPECIFICATIONS CONT. PACER 1534 Transaxle

HydroGear 334

Hydraulic Fluid

Maintenance Free

Speed Range @ 3400 rpm Final Drive Ratio Axle Shaft Continuous Output Torque Rating

0-4.25 (FWD) 0-4 (REV)

Maximum Weight on axle

620 lbs.

CONTROLS: Traction Drive Parking Brake Electric Clutch Mower height of cut

On each handle Automatic w/ OPS Button mounted on dash Crank style on RH rear of mower deck

DIMENSIONS: Length Width Height (top of handle) Net (Dry) Weight Ship Weight

22.2:1 0.750 in. 160 ft-lb.

74 in. 31 in. 40.25 in. 423 lbs. (191.9 kg) 560 lbs. (254.0 kg)

34” MOWER Type Width of Cut Height of Cut Cutting Positions Spindles Mounting Mower Drive Mulching Kit Rollers

34 in: Two Blade 34 in (86.4 cm) 1.5 in to 4.5 in (38.1 to 114.3 cm) Infinite (Exclusive Dial-A-Cut™ Control) Sealed Ball Bearings – Lube Fitting Provided At Front Axle, Quick Hitch w/Auto Leveler™ V-Belt from Tractor Engine PTO Electric Clutch Standard Standard

Simplicity Product Specifications

8/1/05

UTILITY VEHICLE SPECIFICATIONS Model Engineering P/N Trademark Name Power Unit: Engine Manufacturer Engine Part Number Engine Model & Spec. No. Horsepower/Engine Type CARB and EPA Compliant Configuration/Displacement Spin-on Oil Filter Starter Spark Arrestor Muffler Battery Capacity Electrical System Cooling Air Filter Power Link Power Source Back-up Electrical Power Rated Watts Intermettent Watts Volts Control Panel Style Outlet Offerings Separate Generator Throttle Generator Circuit Breaker Transmission: Type Make Final Drive Gear Differential Speed Selector Lever Fwd Speed Controls/Instrumentation: Steering Brakes Park Brake Headlights Tail Lights 12 Volt Receptacle In Dash Gauge Includes: Speedometer Fuel Gauge RPM Gauge Hour Meter Other Features: Front Suspension Rear Suspension Turning Radius(Inches) Vehicle Load Capacity Towing Capacity Maximum Toungue Weight Class 1 Receiver Hitch Ground Clearance Seat/Color Seat Type Seating Capacity Seating Weight Front Bumper 8/1/05

UV1621BV 7085668 Turf Cruiser

UVG1621BV 7085632 Turf Cruiser

UVGT1621BV 7085903 Trail Cruiser

Briggs & Stratton 7072673 305447 0110 E1 16hp OHV F.P.L. w/oil filter Yes OHV V-Twin/480cc Standard Electric Standard 12 Volt/375 Amps 16 Amp Reg. Air-cooled Remote Canister / Turbo No N/A N/A N/A N/A N/A N/A N/A N/A

Briggs & Stratton 7075877 30544A 0111 E1 16hp OHV F.P.L. w/oil filter Yes OHV V-Twin/480cc Standard Electric Standard 12 Volt/375 Amps 16 Amp Reg. Air-cooled Remote Canister / Turbo Yes Inverter 1000 1500 110 2 Receptacle/Covered 2/15 Amp 110 Volt Standard Standard

Automatic torque converter Hoffco Differential w/lock Kansaki/KT35 F-N-R 0-20 mph

Automatic torque converter Hoffco Differential w/lock Kanasaki/KT35 F-N-R 0-20 mph

Automatic torque converter Hoffco Differential w/lock Kanasaki/KT35 F-N-R 0-18 mph

Rack & Pinion Wet disc in transaxle Standard Equipment Standard Equipment Option Standard Equipment

Standard Equipment Yes Standard Equipment Standard Equipment

Independent Coil Over Shock None 80 500 pounds in bed, 2 passengers @ 250 pounds 1000 Pounds 100 Pounds Standard 7"

Independent Coil Over Shock None 80 501 pounds in bed, 2 passengers @ 250 pounds 1000 Pounds 100 Pounds Standard 7"

Independent Coil Over Shock None 80 502 pounds in bed, 2 passengers @ 250 pounds 1000 Pounds 100 Pounds Standard 7"

Milsco XB180 - 18" / Black

Adjustable with 2 cushioned supports 2 250 pounds for each seat Standard Equipment

Adjustable with 2 cushioned supports

250 pounds for each seat Standard Equipment

Simplicity Product Specifications

UTILITY VEHICLE SPECIFICATIONS CONT. Model Engineering P/N Trademark Name Brush Guard Electric Winch ROPS Seat Belts Tool Box Fuel Tank Capacity Hang Tag Tires & Wheels: Front Tires Rear Tires Tire Type/Manufacturer Wheel Rim Color Cargo Bed: Cargo Bed Capacity Cargo Bed Dimensions LxWxD Cargo Bed Capacity Cargo Bed Lift System Cargo Bed Color Cargo Bed Material Cargo Bed Tailgate Vehicle Dimensions: Wheel Base Overall Length Overall Width Overall Height Vehicle Weight (lbs) GVW Vehicle Color Shipping Weight (approx.) Shipping Container (LxWxH) Warranty: Factory Warranty Accessories & Attachments: Electric Lift Kit / Dump Bed Sun Shade Kit Windshield Brush Guard Electric Winch Kit Electric Winch Remote Control Kit Turf Tire Kit (Silver Rims) Trail Tire Kit (Silver Rims) Stoplight/Turn Signal Kit Yellow Flashing Safety Kit Horn Spark Arrestor Enclosed Soft Cab Trimmer Rack Blower Rack Gas Can Rack Snow Blade 72

UV1621BV 7085668 Turf Cruiser Accessory Accessory Standard Equipment Standard Equipment Standard Equipment 6 Gallons Standard Equipment

UVG1621BV 7085632 Turf Cruiser Accessory Accessory Standard Equipment Standard Equipment Standard Equipment 6 Gallons Standard Equipment

Warn 2.5 ci Standard Equipment Standard Equipment Standard Equipment 6 Gallons Standard Equipment

23 x 10 - 10 (4-ply) 26 x 12.00 - 12 (4-ply) Turf / Carlisle Silver

22 x 11 - 10 (4-ply) 25 x 12 - 10 (4-ply) Dirt Dog ATV / Kenda Silver (877C)

500 Pounds 43" x 43" x 12" 12.8 Cubic Feet Manual Black Plastic

Tailgate w/ Latch & Support Straps

78" 116" 59" 72" 1179 1539 Massey Red 1600 Pounds 126" x 62" x 51"

78" 121" 72" 1179 1539 Turtle Green (555C) 1650 Pounds 126" x 62" x 51"

1 Year

Accessory Accessory Accessory Accessory Accessory

Accessory

Accessory Accessory Accessory Accessory Accessory Accessory

Accessory Accessory Accessory Accessory Accessory Accessory Accessory

Accessory

Accessory Accessory Accessory

Accessory

Simplicity Product Specifications

UVGT1621BV 7085903 Trail Cruiser Standard

59"

8/1/05

LEAF BLOWER SPECIFICATIONS Engineering Part Number POWER: Engine Manufacturer Engine Spec. Numbers Engine Horsepower / Model Engine Configuration Engine Displacement (cu.in./cc) Fuel Tank Capacity Fuel Shut-off Valve Engine RPM Blower Housing Color Engine Crankcase Color Engine Label Electric Start Recoil Starter CARB Compliant Engine EPA Compliant Engine FEATURES: Throttle Control / Type Engine Platform Blower Housing Inlet Blower Housing Material Blower Housing Color Air Flow CFM Air Flow Deflector w/ Handle # of Deflector Positions Impellor Diameter Impellor Type / Blades Blade Size / Gauge Drive System Frame Color Axle Size / Type Wheel Size Tire Type / Manufacturer Wheel Material / Color Wheel Bearing Front Wheel Type Front Wheel Size Front Wheel Color Handle Style / Diameter Handle Grip Handle Color Handle Type / Material Front Billboard Label WARRANTY: MACHINE / ENGINE Residential Use Commercial Use Weight (approx.) (lbs.) Shipping Weight (approx.) Vacuum Dimensions (LxWxH) Shipping Container Size (LxWxH)

8/1/05

7085921 Briggs & Stratton 121212 0110E1 6.0Hp Intek OHV Horizontal / OHV 12.57 / 206 cc 3 Quart Standard 3700+/- 100 Black Black B&S 6.0 Hp OHV No On engine Yes Yes On Handle / Metal Welded Steel 7.5" Steel Red 1700 Standard 2 15" Steel / 4 Blades 3.5" / .25" Push Red 5/8" / Steel 4.10 x 3.5 - 4 Pneumatic / Kenda Steel / Silver Ball Bearing Semi-pneumatic 6" x 1.5" White Tubular steel / 1" Full Length Foam Black 3-Piece / Steel Simplicity 2 / 2 - Years Ltd. 90 / 90 - Days Ltd. 106 125 43" x 25" x 39" 25" x 20" x 25"

Simplicity Product Specifications

LEAF VACUUM SPECIFICATIONS Engineering Part Number POWER: Engine Manufacturer Engine Part Number Engine Spec. Numbers Engine Horsepower / Model Engine Configuration Engine Displacement (cu.in./cc) Fuel Tank Capacity Engine RPM Blower Housing Color Engine Crankcase Color Engine Label Electric Start Recoil Starter CARB Compliant Engine EPA Compliant Engine FEATURES: Throttle Control / Type Nose Cone Width Nose Cone Opening Nose Cone Material Nose Cone Color Height Adjustment # of Height Positions Impellor Diameter Impellor Type / Blades Blade Size / Gauge Air Flow CFM Impellor Housing Color Drive System Axle Size / Type Machine Color Wheel Size Tread Pattern Tire Type Wheel Material / Color Bag Type Bag Capacity Bag Material Bag Color OPC - Safety Switch Handle Style / Diameter Handle Grip Handle Color Handle Type / Material Front Billboard Label WARRANTY: MACHINE / ENGINE Residential Use Commercial Use Weight (approx.) (lbs.) Shipping Weight (approx.) Vacuum Dimensions (LxWxH) Shipping Container Size (LxWxH) 74

7085687

Briggs & Stratton 7075847 123K02 0126-E1 6.5Hp / XRM Vertical / L-Head 11.59 / 190 1.6 quarts 3500 +/- 100 Black Black 6.5Hp Quantum XRM No On engine No Yes On Handle / Plastic 25" 6" Plastic Black .5" - 3.50" 5 14" Steel / 4 Blades 4" / 1/4" 1600 Red Push 3/4" / Steel Red 14" x 2" Radial Gear Semi-pneumatic Plastic / Gray 2 handle w/ quick connect 8 Bushels Felt Black Bag adaptor to outlet Tubular steel / 1" Full Length Foam Black 3-Piece / Steel Simplicity 2 / 2 - Years Ltd. 90 / 90 - Days Ltd. 120 135 63" x 26.5" x 49" 39" x 29" x 26" Simplicity Product Specifications

8/1/05

TILLER, REAR TINE WALK-BEHIND SPECIFICATIONS 6016RT

7016RT

ENGINE Horsepower Cycles Cylinders Bore Stroke Displacement Crankshaft Ignition Starter Fuel Capacity Traction Drive Type Speeds

Briggs & Stratton OHV 6.0 @ 3600 rpm 4 1-Aluminum 2.56” (65.1mm) 2.44” (61.9mm) 12.57 cu in (206cc) Horizontal Magnetron Electric Manual 3 qt. (2.8 L)

Briggs & Stratton OHV 7.0 @ 3600 rpm 4 1-Aluminum 2.56” (65.1mm) 2.44” (61.9mm) 12.57 cu in (206cc) Horizontal Magnetron Electric Manual 3 qt. (2.8 L)

Gear Forward – 69 ft./min. 1 Reverse

TIRES

13-5.00x6

13 – 5.00 x 6

FRAME Construction

Welded Steel, Cast Iron

HANDLE BARS Design Positions side to side Positions (height)

Dual Post 3 3

TINES/TINE COVER Tine Diameter Type Rotation Tilling Width Tilling Depth Adjustable Depth Stake Tine Speed

10” Slasher Forward 16 in. 7 in. 8 Positions 160 rpm

12” Bolo Forward 16 in. 10 in. 8 Positions 160 rpm

WHEEL LOCKS Type

Qwik-Loc

DIMENSIONS Length Width Height Dry Weight Ship Weight Brush Bar Hiller/furrower

56” (142 cm) 20.5” (52.1 cm) 54.5” (133.4 cm) 160 lbs. (72 kg.) 174 lbs. (79 kg.) Optional Optional

58” (147.3 cm) – w/o Furrower 20.5” (52.1 cm) 54.5” (138.4 cm) 170 lbs. (77 kg.) 184 lbs. (84 kg.) Standard Standard

8/1/05

Simplicity Product Specifications

FIELD & BRUSH MOWER SPECIFICATIONS Engineering Part Number

7085922

7085923

Engine Manufacturer

Briggs & Stratton

Kawasaki

Engine Part Number

1723614

1723615

21B977 - 0120 - E1

FH451V - AS10

13hp / Intek

15hp / OHV V-Twin

OHV

OHV F.P.L. w/filter

21 / 344

30.15 / 494

Power:

Engine Spec. Numbers Engine Horsepower/Model Engine Configuration Engine Displacement (cu.in./cc) Fuel Tank Capacity Engine RPM Blower Housing Color Engine Crankcase Color

6 Quarts

6 quarts

3300 +/- 100

3500+/-100

Black

Aluminum

Engine Label

B&S OHV Intek

Kawasaki

Electric Start

Yes

On Engine

Backup Recoil Starter Battery Capacity

130 CCA

Electric System

12V / 9 Amp

12V / 13 Amp

CARB Compliant Engine

Yes

EPA Compliant Engine

Yes

On Handle / Metal

Features: Throttle Control/Type Deck Size

25"

10 Gauge / Steel

Deck Type

Open Front w/ Brush Bar

Deck Drive

Mechanical Clutch / Belt

1.25" Steel

Cast Iron w/ Ball Bearings

Deck Material/Type

Deck Spindle Deck Spindle Type Deck Color

Red

Skid Shoes

16" x 4"

Tread Pattern

Ag(chevron)

Wheel Material/Color

Steel / Gray

Height of Cut

3.25" - 4.75"

Deck Support Rear Wheel Size

# Height of Cut Positions Transmission Manufacturer/Model Transmission Type Differential

Peerless Silentrac / H2000-007

Hydrostatic

Gear

0-6 / 0-2.5 mph

Tubular Steel / 1"

Handle Grip

Foam Covered

Handle Color

Black

Ground Speed Control Rod

4 Position

Front Billboard Label

Simplicity

Residential Use

2 / 2-Years Ltd.

Commercial Use

Ground Speed: Fwd/Rev (MPH) Handle Style/Diameter

Warranty: Machine/Engine 90 / 90 - Days Ltd.

90 / 90 - Days Ltd.

Weight (approx.) (lbs.)

347

367

Shipping Weight (approx.)

454

474

Mower Dimensions (LxWxH)

84" x 32" x 39"

Shipping Container Size (LxWxH)

77" x 32" x 45"

Simplicity Product Specifications

8/1/05

CHIPPER SHREDDER SERIES SPECIFICATIONS

Engine: Model: Horsepower: Cycles: Bore: Stroke: Displacement: Fuel Capacity: Drive System: Rotor Diameter: Rotor Material: Hammers: Triangular: J: Knives: Chipping Capacity: Shredding Capacity: Waste Reduction Ratio: (Up to) Bag Capacity: Overall Height: Length/Width Wheels: (dia/width): Safety Goggles Shipping Weight Options Vac Kit Tow Bar:

8/1/05

8/14

5514

Briggs & Stratton OHV 8.0 4 3.12 in 2.53 in 19.43 cu. In 4 quarts Direct 14 in Laminated steel

Briggs & Stratton OHV 123412-0060-E1 5.5 4 2.68 in 2.20 in 12.48 cu. In 3 quarts Direct 14 in Laminated steel

2 2 2 3.0 in 1/2 in x 18 in

2 2 2 2-1/2 in 1/2 in x 18 in

20:1 2 bu. 34 in 31 in/23 in 8 in x 2.25 in Yes 134 lbs.

20:1 2 bu. 34 in 29.5 in/23 in 8 in x 1.75 in Yes 115 lbs.

Yes Yes

Simplicity Product Specifications

319M & 319E SINGLE-STAGE SNOWTHROWER SPECIFICATIONS ENGINE: Make Model Horsepower Cycles Cylinders Bore Stroke Displacement Crankshaft Ignition Governor Choke Starter Crankcase Fuel Tank

Tecumseh Snow King™ HSK600 3 hp @ 4300 rpm (2.24 kw) 2 1 with Cast Iron Sleeve 2.09 in. (53 mm) 1.75 in. (38.0 mm) 6.00 Cu. In. (98 cc) Horizontal-5/8 in. Diameter Capacitor discharge/Electronic Mechanical, Set to 4300 ± 150 rpm Manual with Bulb Primer 319M – Recoil with compression release, 120V Electric Starter optional 319E – Recoil with 120V Electric Starter Lubrication fuel-oil mixture Capacity: 1.2 quarts (1.1 L)

TRACTION DRIVE: Type Axle Tires

Auger Propelled .375 in. Dia. 1.5 in. x 7 in.

FRAME: Construction

16-Gauge Steel

BLOWER HOUSING: Construction Effective Width Opening Height Spout Scraper Bar

Plastic housing w/steel end caps 19 in.. (48.3 cm) 13.5 in. (34.3 cm) 200° Rotation with Adjustable Deflector Replaceable UHMW plastic

AUGER: Construction Diameter Bearing

Steel with rubber flights 9 in (22.9 cm) 2 sealed bearings

CHUTE: Height Diameter Deflector Clearing Stick

14.5 in. (36.8 cm) 6.25 in. (15.87 cm) Manually adjustable High density polyethylene

CONTROLS: Throttle Traction/ Auger Drive Spout Rotation DIMENSIONS: Length Width Height (top of handle) Net (Dry) Weight Ship Weight

Full throttle position only Full width lever bail Integral molded in handle 3 ft, 11 in. (119.4 cm) 20.5 in. (52.1 cm) 2 ft., 7 in. (78.7 cm) 2 ft., 10.2 in. (87 cm) 319M – 54 lbs. 24.49 kg) 319E – 57 lbs. (25.85 kg) 319M – 59 lbs. ( 26.75 kg) 319E – 62 lbs. ( 28.12 kg) Simplicity Product Specifications

8/1/05

520M & 520E SINGLE-STAGE SNOWTHROWER SPECIFICATIONS ENGINE: Make Model Horsepower Cycles Cylinders Bore Stroke Displacement Crankshaft Ignition Governor Choke Starter Crankcase Fuel Tank

Tecumseh Snow King™ HSK850 5 @ 3600 rpm (3.73 kw) 2 1 with Cast Iron Sleeve 2.44 in. (61.9 mm) 1.81 in. (46.0 mm) 8.46 Cu. In. (139 cc) Horizontal-7/8 in. Diameter Capacitor discharge/Electronic Mechanical, Set to 3600 ± 150 rpm Manual with Bulb Primer 520M – Recoil with compression release, 120V Electric Starter optional 520E – Recoil with 120V Electric Starter Lubrication fuel-oil mixture Capacity: 2.1 quarts (2.1 L)

TRACTION DRIVE: Type Axle Tires

Auger Propelled .375 in. Dia. 1.5 in. x 7 in.

FRAME: Construction

12-Gauge Steel

BLOWER HOUSING: Construction Effective Width Opening Height Spout Scraper Bar

Plastic housing w/steel end caps 20 in.. (51 cm) 12.5 in. (31.75 cm) 220° Rotation with Adjustable Deflector Replaceable UHMW plastic

AUGER: Construction Diameter Bearing

Steel with rubber flights 9 in (22.9 cm) 2 sealed bearings

CHUTE: Height Diameter Deflector Clearing Stick

17 in. (43.18 cm) 6.25 in. (15.87 cm) Manually adjustable High density polyethylene

CONTROLS: Throttle Traction/ Auger Drive Spout Rotation DIMENSIONS: Length Width Height (top of handle) Net (Dry) Weight Ship Weight

8/1/05

Full throttle position only Full width lever bail Crank on Lower Handle 3 ft, 11 in. (119.4 cm) 20.5 in. (52.1 cm) 2 ft., 7.75 in. (80.6 cm) 3 ft., 5.5 in. (105.4 cm) 520M – 70 lbs. (31.8 kg) 520E – 75 lbs. (34.1 kg) 520M – 85 lbs. (38.6 kg) 520E – 90 lbs. (40.9 kg) Simplicity Product Specifications

7555M & 8560E INTERMEDIATE TWO-STAGE SNOWTHROWER SPECIFICATIONS ENGINE: Make Model Horsepower Cycles Cylinders Bore Stroke Displacement Crankshaft Ignition Governor Throttle/Choke Starter Crankcase Fuel Tank TRACTION DRIVE: Type Speeds

Axle Tires FRAME: Construction

BLOWER HOUSING: Construction Effective Width Opening Height Spout Rotation Scraper Bar Skid Shoes

7555M

8560E

Briggs & Stratton Power Built HSSK50 7.5 hp 4 1 with Cast-Iron Sleeve 2.69 in. (68.33 mm) 2.20 in. (55.88 mm) 12.57 Cu. In. (206 cc) Horizontal-3/4 in. Diameter Flywheel Magneto with Key Switch Adjustable, Mechanical, Running in Oil Set to 3600 + 150 rpm Manual with Bulb Primer Recoil with Mitten Grip Accepts Optional 120 Volt Electric Starter Lubrication: Splash System Capacity: 20 Oz. (.59 L) Capacity: 2 quarts (1.89 L)

Briggs & Stratton Intek OHV 12 E 394 8.5 hp 4 1 with Cast-Iron Sleeve 2.69 in. (68.33 mm) 2.20 in ( 55.88 mm) 12.57 Cu. In. (206 cc) Horizontal-3/4 in. Diameter Flywheel Magneto with Key Switch Adjustable, Mechanical, Running in Oil Set to 3600 ± 150 rpm Manual with Bulb Primer Recoil with Mitten Grip Standard 120 Volt Electric Starter Lubrication: Splash System Capacity: 20 Oz. (.59 L) Capacity: 3 quarts (2.9 L)

Friction Drive Transmission 1st: .7 MPH (1.1 km/h) 2nd: 1.0 MPH (1.6 km/h) 3rd: 1.4 MPH (2.3 km/h) 4th: 1.9 MPH (3.1 km/h) 5th: 2.5 MPH (4.0 km/h) 1 Rev.: 1.3 MPH (2.1 km/h) 2 Rev.: 1.7 MPH (2.7 km/h) 3/4 in. Solid 15 x 5.00 - 6 X-Trac

Friction Drive Transmission 1st: .7 MPH (1.1 km/h) 2nd: 1.0 MPH (1.6 km/h) 3rd: 1.4 MPH (2.3 km/h) 4th: 1.9 MPH (3.1 km/h) 5th: 2.5 MPH (4.0 km/h) 1 Rev.: 1.3 MPH (2.1 km/h) 2 Rev.: l.7 MPH (2.7 km/h) 3/4 in. Solid 15 x 5.00 - 6 X-Trac

Heavy-Gauge Steel, Folding Tubular Handles

Welded Reinforced Steel 22 in. (55.88 cm) 20 in. (50.8 cm) 190° Rotation with Adjustable Deflector High Carbon Wear Resistant Steel Two sided Adjustable Height, Heat Treated Steel

Welded Reinforced Steel 24 in. (61 cm) 20 in. (50.8 cm) 190° Rotation with Adjustable Deflector High Carbon Wear Resistant Steel Two sided Adjustable Height, Heat Treated Steel

Simplicity Product Specifications

8/1/05

7555M & 8560E INTERMEDIATE TWO-STAGE SNOWTHROWER SPECIFICATIONS CONT. 7555M

8560E

AUGER: Construction Diameter Bearing

Serrated Flite, Welded Steel 12 in. (30.48 cm) UHMW Polyethylene

IMPELLER: Construction Diameter Bearings

4 Steel Blades, Welded Steel 10 in. (26 cm) Prelubricated & Sealed Ball Bearing

Lever on Left Handle Lever on Operator Console Lever on Right Handle Crank on Operator Console Allows spout rotation while Traction & auger drive are engaged

CONTROLS: Traction Drive Gear Shift Auger Drive Spout Rotation Free Hand™ Control

DIMENSIONS: Length Width Height (top of handle) Net (Dry) Weight Ship Weight

53 in. (134.6 cm) 24 in. (61.0 cm)

53 in. (134.6 cm) 26 in. (66.0 cm)

41 in. (104 cm) 176 lbs. (80 kg) 200 lbs. (91 kg)

41 in. (104 cm) 188 lbs. (85 kg) 215 lbs. (97 kg)

Handwarmers Headlight

Not Available Not Available

Optional – Kit 1686996 Optional – Kit 1687029

8/1/05

Simplicity Product Specifications

9560E, 10560E, 11570E, 1380E & 1390E LARGE FRAME TWO-STAGE SNOWTHROWER SPECIFICATIONS 9560E

10560E – Power Boost™

11570E – Power Boost™

1380E – Power Boost™

1390E – Power Boost™

ENGINE:

9.5 hp Briggs Intek Snow OHV

10.5 hp Briggs Intek Show OHV

11.5 hp Briggs Intek Show OHV

13 hp Briggs Intek Show OHV

Model Horsepower Cycles Cylinders Bore

Model 20 9.5 hp (6.7 kw) 4 1 3.12 in. (79.2 mm) 2.43 in. (61.7 mm) 18.6 Cu In. (305 cc) Horizontal Flywheel Magneto with Key Switch

Model 20 10 hp (7.8 kw) 4 1 3.12 in. (79.2 mm) 2.43 in. (61.7 mm) 18.6 Cu In. (305 cc) Horizontal Flywheel Magneto with Key Switch

Model 21 11.5 hp (8.6 kw) 4 1 3.30 in. (83.8 mm) 2.43 in. (61.7mm) 18.6 Cu In. (341 cc) Horizontal Flywheel Magneto with Key Switch Adjustable, Mechanical Running in Oil Set to 3600 +150 rpm Manual w/ Bulb Primer Recoil Start with Mitten Grip Includes 120 Volt Electric Starter Lubrication: Splash System Cap. 26 Oz. (0.76L) Capacity: 1 gallon (3.8 L)

Model 21 13 hp (9.7 kw) 4 1 3.30 in. (83.8 mm) 2.43 in. (61.7 mm) 18.6 Cu In. (341 cc) Horizontal Flywheel Magneto with Key Switch Adjustable, Mechanical, Running in Oil Set to 3600 +150 rpm Manual w/ Bulb Primer Recoil Start with Mitten Grip Includes 120 Volt Electric Starter Lubrication: Splash System Cap. 26 Oz. (0.76L) Capacity: 1 gallon (3.8 L)

Model 21 13 hp (9.7 kw) 4 1 3.30 in. (83.8 mm) 2.43 in (61.7 mm) 20.8 Cu. In. (341 cc) Horizontal Flywheel Magneto with Key Switch Adjustable, Mechanical, Running in Oil Set to 3600 +150 rpm Manual w/ Bulb Primer Recoil Start with Mitten Grip Includes 120 Volt Electric Starter Lubrication: Splash System Cap 26 Oz. (0.76L) Capacity: 1 gallon (3.8 L)

Stroke Displacement Crankshaft Ignition

Governor

Adjustable, Adjustable, Mechanical, Mechanical Running in Oil Running in Oil Set to 3600 Set to 3600 +150 rpm +150 rpm Throttle/Choke Manual w/Bulb Manual w/Bulb Primer Primer Starter Recoil Start with Recoil Start with Mitten Grip Mitten Grip Includes 120 Volt Includes 120 Volt Electric Starter Electric Starter Crankcase Lubrication: Lubrication: Splash System Splash System Cap. 26 Oz. Cap. 26 Oz. (0.76L) (0.76L) Fuel Tank Capacity: Capacity: 1 gallon 1 gallon (3.8 L) (3.8 L) TRACTION DRIVE: Type Friction Drive Transmission w/ Chain & Gear Reduction

EasyTurn

Differential Release

Handlebars

Tubular Handles

Channel Handles

Simplicity Product Specifications

8/1/05

9560E, 10560E, 11570E, 1380E & 1390E LARGE FRAME TWO-STAGE SNOWTHROWER SPECIFICATIONS 9560E

10560E – Power Boost™

11570E – Power Boost™

1380E – Power Boost™

1390E – Power Boost™

24.0 in. (60 cm) Welded Reinforced Steel

28 in. (71 cm) Welded Reinforced Steel

32 in. (80 cm) Welded Reinforced Steel

38 in. (97 cm) Welded Reinforced Steel

Opening Height 21 in. (53.3 cm) Spout 200° Rotation with Adjustable Deflector Scraper Bar High Carbon Wear Resistant Steel Skid Shoes Two Sided Adjustable Height, Heat Treated Steel AUGER: Construction Serrated Flite, Welded Steel Diameter 14.0 in. (36 cm) Bearing UHMW Polyethylene Auger Speed w/ engine at 3600 rpm 110 rpm

21 in. (53.3 cm) 200º Rotation with Adjustable Deflector High Carbon Wear Resistant Steel Two Sided Adjustable Height, Heat Treated Steel

21 in. (53.3 cm) 200º Rotation with Adjustable Deflector High Carbon Wear Resistant Steel Heavy Duty Two-Sided Adjustable Height

Serrated Flite, Welded Steel 14.0 in. (36 cm) UHMW Polyethylene

Serrated Flite, Welded Steel 14 in. (36 cm) UHMW Polyethylene

Serrated Flite, Welded Steel 14 in. (36 cm) Ball Bearing

110 rpm

4 Steel Blades, 4 Steel Blades, Welded Steel Welded Steel 12.0 in. (30.5 cm) 12.0 in. (30.5 cm) Prelubricated & Prelubricated & Sealed Ball Sealed Ball Bearing Bearing

4 Steel Blades, Welded Steel 12.0 in. (30.5 cm) Prelubricated & Sealed Ball Bearing

4 Steel Blades, Welded Steel 12 in. (30.5 cm) Prelubricated & Sealed Ball Bearing

1100 rpm

BLOWER HOUSING: Effective Width Construction

IMPELLER Construction Diameter Bearings

Impeller Speed w/ engine at 3600 rpm

8/1/05

1100 rpm

Simplicity Product Specifications

9560E, 10560E, 11570E, 1380E & 1390E LARGE FRAME TWO-STAGE SNOWTHROWER SPECIFICATIONS CONT.

CONTROLS: Traction Drive Engagement

Gear Shift

Auger Drive Engagement

9560E

10560E – Power Boost™

11570E – Power Boost™

Lever on left handle

Lever on Console

Lever on Right Handle

Spout Rotation Manual - Crank on Console with Right Angle Gear to worm gear drive for rotation Chute Deflector Adjustment N/A

1390E – Power Boost™

Lever on left handle

Lever on Console

Lever on Right Handle

Manual - Crank on Console with Right Angle Gear to worm gear drive for rotation

Electric - switch on RH handlebar to gear drive for rotation

Remote Cable for Chute Height Adjustment

High Density Polyethylene

Allows Spout Rotation While Traction & Auger Drive are engaged

Trigger on Left Handle

Handwarmers

KIT #1686996

Standard – Hi/lo Switch mounted on back of console

Headlight

Standard

Drift Cutters

Optional

Standard

Clearing Stick Free Hand™ Control

EasyTurn™ Control

1380E – Power Boost™

Simplicity Product Specifications

8/1/05

9560E, 10560E, 11570E, 1380E & 1390E LARGE FRAME TWO-STAGE SNOWTHROWER SPECIFICATIONS CONT. 9560E

10560E – Power Boost™

11570E – Power Boost™

1380E – Power Boost™

1390E – Power Boost™

.6 mph (.97 km/h)

2nd Gear

.9 mph (1.5 km/h)

3rd Gear

1.4 mph (2.3 km/h)

4th Gear

2.1 mph (3.4 km/h)

2.1 mph (3.4 km/h

2.1 mph (3.4 km/h))

5th Gear

2.8 mph (4.5 km/h)

Reverse 1

.9 mph (1.4 km/h)

Reverse 2

1.4 mph (2.3 km/h)

Axle

Solid with Lock

Tires

16x4.80/4.00-8 X-Trac Pneumatic

16x6.50/4.00-8 X-Trac Pneumatic

56-7/8 in. (142 cm)

26.0 in. (66 cm)

30.0 in. (75 cm)

34.0 in. (86 cm)

40 in (102 cm)

Height (top of handle) 37-3/8 in. (93.4 cm)

37-3/8 in. (93.4 cm)

Net (Dry) Weight ~ 230 lbs. (105 kg)

~ 240 lbs. (109 kg)

~ 255 lbs. (116 kg)

~ 265 lbs. (119 kg)

~ 315 lbs. (143 kg)

Ship Weight

~ 330 lbs. (150 kg)

~ 328 lbs. (149 kg)

~ 360 lbs. (164 kg)

~ 405 lbs (184 kg)

Speeds 1st Gear

DIMENSIONS: Length Width

~ 270 lbs. (122 kg)

WALK-BEHIND SNOWTHROWER CABS Height of snow cab (to ground) on 9560E 10560E, 11570E 1380E, 1390E Height of snow cab (to ground) on 7555M, 8560E

8/1/05

79.5” est.

79” est.

Simplicity Product Specifications

TRACTOR-MOUNT SNOWTHROWER SPECIFICATIONS 42” & 46” Snowthrowers (Single-Stage, Tractor-Mount) Type Lift Clearing Width/Height

Single-Stage Mechanical – Broadmoor & Conquest Hydraulic – Prestige W-42” & 46” / H-17”

Input Speed Auger Shaft Diameter Auger Diameter Auger Speed Auger Bearings Auger Side Housing Skid Shoe Adjustment Scraper Bar Discharge Chute Spout Rotation Throwing Distance Rear Counterweight

3400 rpm (Belt Drive) 1” 12” 1100 RPM Ball Bearing 10-Gauge Steel 0-2” Steel Steel Mechanical or electric, depending on model, 200° Up to 30 ft. 66 – 100 lbs. Required

42” Snowthrower (Two-Stage, Tractor-Mount) Type Lift

Clearing Width/Height

Two-Stage Mechanical – Broadmoor, Conquest Hydraulic – Prestige W-42” / H-20”

Input Speed Impeller Diameter Impeller Speed Auger Shaft Auger Diameter Auger Speed Auger Side Housing Shear Bolt Protected Adjustable Skid Shoes Scraper Bar Discharge Chute Spout Rotation Throwing Distance Rear Counterweight

3500 RPM (Belt Drive) 12” 1457 RPM (4 Blade) Gear Box 14” 817 RPM 12-Gauge Steel Yes Yes Steel Steel Electric Up to 40 ft. 66-100 lbs. Required

Simplicity Product Specifications

8/1/05

ALLIED ATTACHMENTS & ACCESSORIES Following is a list of manufacturers that provide attachments and accessories that may be compatible with Simplicity/AGCO/ Massey Ferguson lawn and garden tractors. Because of the large number of items available, we are not able to review their compatibility, performance and design like we do with our standard attachments. Dealers are requested to make their own contact and arrangements with the manufacturers listed. It is the dealer’s responsibility to work with the attachment manufacturer to determine the suitability of an attachment’s use with the product, both from a safety and reliability standpoint. Upon contact with attachment manufacturers, make certain warranty, parts and service issues are covered. MANUFACTURER

ATTACHMENTS

Agri-Fab, Inc. 303 W. Raymond St. Sullivan, IL 61951 (217) 728-8388 FAX: (217) 728-2032 www.agri-fab.com

Lawn Sweeps Lawn Roller Lawn Aerator Tine Dethatcher Gang Mowers Broadcast Spreader

BEFCO, Inc. Hwy. 301S, 1781 S. Wesylan Blvd. P.O. Box 6036 Rocky Mount, N.C. 27802 (252) 977-9020 or (800) 334-6617 FAX: (252) 977-9718 www.befco.com

Parts for Rear Scraper Blade, 50” Rear Tiller – #1692935 #1693448 Shaft-Driven, Rear-Mount Finish Mowers, Rear-Mount Flail Mowers

BlueBird International, Inc. 700 Park St. Beatrice, NE 68310 (402) 223-2391 (800) 808-2473 FAX: (402) 223-4791 www.bluebirdintl.com

Walk-Behind Lawn Combers Walk-Behind Seeders Walk-Behind Aerators Easy Rake Tractor-Mount Lawn Vacuums

Brinly Hardy Co. 3230 Industrial Pkwy. Jeffersonville, IN 47130 (800) 626-5329 see distributor listing for contact, pricing www.brinly.com

Shown in full line catalog Lawn Rollers Lawn Sweeps Lawn Aerators Single Disk Harrow Broadcast Spreaders Moldboard Plow

Custom Products of Litchfield P.O. Box 718 Litchfield, MN 55355 (320) 693-3221 or (800) 222-5463 FAX: (320) 693-7252 www.800cabline.com

Universal folding sunshades to fit ROPS

Dethatchers Other attachments Planter w/fertilizer attach. Tool Bar Kits 42” Reversible Blade

Simplicity Product Specifications

8/1/05

ALLIED ATTACHMENTS & ACCESSORIES CONT. MANUFACTURER Femco, Inc. 500 North 81 Bypass P.O. Box 1186 McPherson, KS 67460 (620) 241-3513 (800) 677-0898 FAX: (620) 241-3532 www.femcomfg.com e-mail: femco@femcomfg.com Fuerst Brothers 1020 S. Sangamon Gibson City, IL 60936 (800) 435-9630 www.fuerst-bros.com Herd Seeder Co., Inc. 2383 S. U.S. 35 P.O. Box 448 Logansport, IN 46947 (574) 753-6311 www.herdseeder.com e-mail: info@herdseeder.com JRCO, Inc. P.O. Box 41304 Minneapolis, MN 55441 (763) 535-7200 or (800) 966-8442 FAX: (765) 535-9553 www.jrcoinc.com e-mail: info@jrcoinc.com Kwik Way Manufacturing 800 South Marion Rd. Sioux Falls, SD 57106 (605) 336-6032 or (800) 843-3720 www.kwmanufacturing.com Lambert Mfg. Corp. 117 South 3rd St. Box 278 Ansonia, OH 45303 (937) 337-3641 FAX: (937) 337-0755 www.lambertmfg.com Master Mfg. Co. 119 Main St. P.O. Box 3806 Sioux City, IA 51102 (712) 258-0108 (888) 632-8598 88

ATTACHMENTS Rollover Protective Structures, Cabs & Canopies Parts for Simplicity ROPS #1692927 Parts for Discontinued Simplicity Hard Cab #1692933 Electric Windshield Wiper Mounts for Hard Cab Light Packages for Hard Cab

Flexible Tine Mini-Harrow

Electric Driven Broadcast Seeder Broadcast Seeders

Front Dethatcher for Previous Legacy Series Tow Behind Dethatcher Rear-Mounted Bucket Grass collection systems Rear Scoop “Scoop-Tote”

Front-end loader & Backhoe for Legacy, Legacy XL Service Parts for Loaders, backhoes, box scrapers

Lawn & Pavement Sweepers Vacuum Collectors Utility Cart Seeders & Cultivators

Dobbins Power Sprayers Turf Choice Power Sprayers Kuker Power Sprayers

Simplicity Product Specifications

8/1/05

ALLIED ATTACHMENTS & ACCESSORIES CONT. MANUFACTURER Ohio Steel Industries, Inc. 2575 Ferris Road Columbus, OH 43224-2597 (614) 471-4800 FAX: (614) 471-1190 www.ohiosteel.com Original Tractor Cab P.O. Box 97 Arlington, IN 46104 (765) 663-2214 (800) 247-5305 www.originalcab.com Palmor Products P.O. Box 38 Thorntown, IN 46071 (800) 872-2822 or (317) 436-2496 www.trac-vac.com e-mail: palmor@trac-vac.com PeCo P.O. Box 1197, 100 Airport Rd. Arden, NC 28704 (828) 684-1234 or (800) 438-5823 FAX: (828) 684-0858 www.lawnvac.com e-mail: peco@iao.com

ATTACHMENTS Aerators, Lawn Rollers Spreaders, Dump Carts

Tractor Cabs Accessories for Soft Side Simplicity Cabs Tractor Sunshades

Trac Vac Large Capacity Tow-Behind Collection Systems (same as #1691620 and #1691987)

Homeowner Trailer Vacs Professional Trailer Vacs

Precision Products 316 Limit St. Lincoln, IL 62656 (217) 735-1590 or 800-225-5891 www.precisionprodinc.com

Dump Cart 1693125

Shaver Manufacturing Co. P.O. Box 358 Graettinger, IA 51342 (712) 859-3293 FAX: (712) 859-3294 shavermfg@worldnet.att.net

Post Hole Diggers

SMC Schwartz Division 129 Pine Street South Lester Prairie, MN 55354-0248 (320) 395-2581 FAX: (320) 395-2965 Spyker Spreaders LLC I40 Mill St. Urbana, IN 46690 (800) 977-6130 FAX: (260) 774-3416 www.spyker.com e-mail: sales@spyker.com 8/1/05

Sunstar Front-End Loader #1692932

Broadcast Spreaders

Simplicity Product Specifications

ALLIED ATTACHMENTS & ACCESSORIES CONT. MANUFACTURER Sweepster Jenkins Eqt. Co., Inc. 2800 N. Zeeb Rd. Dexter, MI 48130 (734) 996-9116 or (800) 456-7100 FAX: (734) 996-9014 www.sweepster.com e-mail: sweep@sweepster.com Swisher Mower 1602 Corporate Dr. PO Box 67 Warrensburg, MO 64093 (800) 222-8183 or (660) 747-8183 FAX: (660) 747-8650 www.swisherinc.com Woods Equipment Co. 2606 Illinois Route 2 South P.O. Box 1000 Oregon, IL 61061 (866) 869-6637 or (815) 732-2141 FAX: (815) 732-7580 www.woodsonline.com e-mail: info@woodsonline.com

WorkSaver, Inc. P.O. Box 100, 9 Worksaver Trail Litchfield, IL 62056-0100 (217) 324-5973 FAX: (217) 324-3356 www.worksaver.com York Modern Corp. PO Box 488 Unadilla, NY 13849 (607) 369-7111 or (800) 643-YORK (9675) FAX: (607) 369-2625 www.yorkmodern.com E-mail: sales@yorkmodern.com

ATTACHMENTS Power Rotary Sweepers Leaf Sweepers Parts for Simplicity 60" Broom #1693246

Log Splitters

Shaft-Driven Rear-Mount Finish mower

Seeder-Spreader Landscape Rakes

Pull-Behind Adjustable Rakes Scarifier 3-Point Mounted Rakes

Simplicity Product Specifications

8/1/05

Notes:

8/1/05

Simplicity Product Specifications

Notes:

Simplicity Product Specifications

8/1/05

Notes:

8/1/05

Simplicity Product Specifications

We reserve the right to discontinue all models or change specifications without notice.

SIMPLICITY MANUFACTURING, INC. 500 N. Spring Street, P.O. Box 997â&#x20AC;˘ Port Washington, WI 53074

050456