Weld Connect July 2019 by Weld Australia

weldaustralia.com.au | office@weldaustralia.com.au | +61 (0)2 8748 0100 | 20 Bridge Street, Pymble NSW

Weld Connect July 2019

Contents 03 06 07 08 10 11 12 14 15 16 17 18 23 25 26

A Message from the CEO National Manufacturing Summit Membership Matters Pipeline Repair Course New South Wales Division Victoria Division South Australia Division Queensland Division Western Australia Division Northern Territory Division Tasmania Division Training & Certification 2019 Training Calendar Advanced Welder Training Courses Upcoming Events

2019 Membership Renewals On 30 June 2019, all unpaid Weld Australia memberships lapsed. The associated Member Login details will soon be deactivated. To reactivate your membership, please contact us via membership@weldaustralia.com.au or +61 (2) 8748 0100.

Weld Australia Contact Information National Office Building 3, Level 3, Suite 5 Pymble Corporate Centre 20 Bridge Street Pymble, NSW 2073 (PO Box 197 Macquarie Park BC NSW 1670) T: +61 (0)2 8748 0100 E: info@weldaustralia.com.au

Qualification & Certification Manager Paolo Corronca T: +61 (0)438 012 099 E: p.corronca@weldaustralia.com.au

Chief Executive Officer Geoff Crittenden T: +61 (0)2 8748 0100 E: g.crittenden@weldaustralia.com.au

Marketing & Communications Manager Donna South T: +61 (0)2 8748 0130 E: d.south@weldaustralia.com.au

Training Manager Paul James T: +61 (0)2 8748 0150 E: p.james@weldaustralia.com.au

July 2019

Membership Manager Eva Chun T: +61 (0)2 8748 0135 E: e.chun@weldaustralia.com.au Editorial Content Sally Wood T: +61 (0)434 442 687 E: sally@wordly.com.au

Weld Connect

Page 2

A Message from the CEO The Rationale Behind the Introduction of ISO 9606-1 Qualification testing of welders—Fusion welding Part 1: Steels There appears to be a lack of understanding within the fabrication industry about the rationale for introducing ISO 9606 Qualification testing of welders— Fusion welding into Australia and, more broadly, the need for ISO Standards. As such, I thought I would take this opportunity to explain it. I would like to begin with a brief overview of AS/NZS 1554 Structural steel welding Part 1: Welding of steels structures. An excellent Standard, AS/NZS 1554.1 states that a welder must be qualified (by welding a coupon in accordance with the relevant acceptance criteria as outlined in the Standard). For shutdown work, particularly where welders move from site to site, this can impose a significant cost impost (especially in time delays) due to the need to requalify every time they commence work on a new site. Whilst this is not so much of issue for workshop-based fabricators where they have ready access to their welder’s qualification records, it is a major problem for organisations within the resources, power, defence, and oil and gas industries who employ teams of specialist welders to

undertake program-specific on-site maintenance work, usually where there may be minimal records available of either the welder’s qualifications, or maintenance of qualifications. In this situation, every welder contracted to undertake programspecific maintenance work must complete a welding coupon. Each welding coupon costs between $2,000 and $5,000, depending on the complexity of the weld procedure to which the welder is being qualified. Unfortunately, the failure rate of welders attempting these coupons can be as high as 80%. Therefore, to successfully qualify 10 welders, an organisation may need to test as many as 50 welders, at a total cost of as much as $250,000. While this type of cost is an unacceptable burden on many industries, I want to emphasise that this is not a criticism of AS/NZS 1554.1. To help alleviate this financial burden, Weld Australia looked internationally for an appropriate Standard that would provide a benchmark for welder competency in Australia.

July 2019

New Weld Australia Members: June Weld Australia would like to welcome the following members who joined in June 2019. Corporate Members • Engineering Welding and Inspection Services • Queensland TAFE Individual Members • Dan Marvin Bagorio • John Bridges • William Cox • Micheal Crump • Duncan Galbraith • Michael Gibson • Adrian Hernandez • Darren Lyle • Andrew Price • Steven Reid • Michael Sexton • Nyanza van Vonno • Adam Vanderbiezen • Brett Wilson Student Members • Amy Jones • Jeffrey Hinglong Law • Vikrant Pradhan To become a Weld Australia member, all you need to do is: • Visit: weldaustralia.com.au • Phone: 02 8748 0100 • Email: membership@ weldaustralia.com.au

Weld Connect

Page 3

A Message from the CEO We had two options: ISO 9606-1 or AS/NZS 2980 Qualification of welders for fusion welding of steels. At the time of consideration, AS/NZS 2980 was known to be based on an old version of ISO 9606 1. In consultation with our members—particularly major asset managers in the resources, power, defence, and oil and gas industries— we settled on current edition of ISO 9606-1 for several reasons. Why Weld Australia Opted for ISO 9606-1 ISO 9606-1 is the only Standard in the world that is accepted in both Europe and America, and is the minimum requirement for working on rolling stock, defence, infrastructure and pressure equipment projects.

transportable across worksites and employers, avoiding the need to requalify welders where there is evidence of maintenance of qualification. In addition, a six-monthly confirmation process is used to verify welder qualifications to ensure maintenance of welder skills, without the need for additional testing. The confirmation process is similar to that required for welders qualified to other standards including AS/NZS 1554.1.

ISO 9606 1 does not replace either AS/NZS 1554 or AS/NZS 1796 Certification of welders and welding supervisors. Rather, ISO 9606-1 is complementary to these Standards, working well alongside both. The Australian Welder Certification Register Having decided on this strategy, Weld Australia acquired an online system to help us manage the process of qualifying and certifying welders to ISO 9606-1: the Australian Welder Certification Register (AWCR).

In fact, ISO 9606-1 is required under several international Standards, including EN 15085 Railway applications—Welding of railway vehicles and components, and DIN 2303 Welding and allied processes—Quality requirements for production and maintenance companies for military products. ISO 9606-1 utilises a simple test that assesses welding competency according to a specific weld procedure, based on a practical acceptance criteria. It can be used to test the competency of a welder to complete a variety of weld procedures, from a basic butt weld up to the most complex pipe joints, utilising various positions, processes and materials. Under ISO 9606-1, welder competency testing is focused on the three key elements required of a welder, including the ability to: 1. Set up a welding machine 2. Read a welding procedure 3. Weld a coupon in accordance with the relevant acceptance criteria

Weld Australia Fast Facts 10

Meetings with welding industry stakeholders

Newly trained International Welding Inspectors

Blended learning courses commenced

People completed Welding Sales Representative Training

Meeting with State Government

Member events

Memorandum of Understanding signed

Welder qualifications are valid for two or three years, and are

Page 4 | WELD CONNECT | February 2018

1190

Hotline queries resolved

Welders registered on the Australian Welder Certification Register

July 2019

Weld Connect

Page 4

A Message from the CEO Under the AWCR system, welders complete a test that qualifies them to a welding procedure as set out in ISO 9606-1. Once qualified, the welder is provided with a test certificate to that procedure, becoming a Registered Welder, and the information recorded in the AWCR. The certificate is valid for up to three years, subject to six monthly confirmations by a responsible person (such as a supervisor or an approved examiner). The AWCR system is already proving to be enormously beneficial for many organisations. It enables asset managers and owners to check the competence level of any Registered Welder against an internationally recognised Standard, minimising welder testing and reducing costs. By qualifying welders against a recognised and certified competency level, the risk of a

welder failing a weld procedure is significantly reduced. In addition, asset managers can assess welders against current, rather than past, performance, and quickly and easily identify and contact Registered Welders for employment.

AWCR. Register your business on the AWCR, and ensure your employees and subcontractors are registered and certified via the AWCR. Access to the AWCR is completely free of charge for all Weld Australia members.

I encourage all Australian manufacturers to support the

For more information, visit: https://awcr.org.au

Vale Tony Dixon It is with sadness that Weld Australia would like to inform members that Tony Dixon, Chief Executive of the Australian Steel Institute (ASI) recently passed away after a long battle with illness. With over 30 yearsâ&#x20AC;&#x2122; in-depth management experience and welldeveloped business acumen, Tony possesses an exceptional track record of results across strategy, business development and business transformation. Tony was appointed as the Chief Executive of the ASI in 2015, and worked tirelessly to promote the steel industry during the four years of his tenure. Prior to commencing at the ASI, Tony held

several General Manager positions (across the Strategy, Marketing and Business Development, Sales and Marketing, and Pipe and Tube business units) at Arrium / OneSteel (from 2000 to 2015), as well as a number of sales and marketing managerial roles at BHP Steel (from 1989 to 2000). Tony was also an active member of several industry bodies; he was the Deputy Chair of the Industry Technical Infrastructure Forum (ITIF), a Director and the Company Secretary of the Building Products Innovation Council (BPIC), and served on the Board of the Australasian Certification Authority for Reinforcing and Structural Steels.

Page 5 | WELD CONNECT | February 2018

July 2019

Those of us who knew Tony are left with many fond memories. He will be deeply missed. Our thoughts are with Tonyâ&#x20AC;&#x2122;s family and friends, and the ASI team at this sad time.

Weld Connect

Page 5

NATIONAL MANUFACTURING

SUMMIT 2019

SKILLS FOR THE FUTURE REGISTER NOW 22 AUGUST 2019 THE AUSTRALIAN SYNCHROTRON MELBOURNE Australia is facing a significant shortage of skilled, qualified trades workers. Without action, the nation will be unable to meet future demand on major projects in industries as diverse as defence, shipbuilding, aerospace, infrastructure, rolling stock, and resources. Despite the manufacturing sector experiencing a period of growth, industry participants continue to cite workforce capability and availability as a critical constraint. This constraint is the basis of the 2019 National Manufacturing Summitâ&#x20AC;&#x2122;s theme: Skills for the Future.

NATIONAL MANUFACTURING SUMMIT 2019 CO-SPONSORS

https://manufacturingsummit.com.au | 02 8748 0130 | events@weldaustralia.com.au

Membership Matters Welcome to the inaugural ‘Membership Matters’ column. In this new, regular feature, we will discuss all things membership related. From member benefits through to getting to know your local statebased Division Comittees. If it’s related to Weld Australia membership, you’ll find it here. Weld Australia Member Benefits In today’s competitive career market, it is essential that you possess the right tools to excel. This means maximising every opportunity available. Weld Australia membership is just one tool you have at your fingertips. But, are you making the most of your membership? Each month, we will highlight the benefits afforded to you as a member of Weld Australia. We will also announce some new member benefits in the near future. So, be sure to watch this space. Becoming a Weld Australia member allows you to surround yourself with people that are passionate about welding, fabrication and improving the future of all industrial sectors across Australia. It also offers a range of member benefits: • Regular industry news, insights and market trend updates via two publications: Weld Connect (our electronic monthly newsletter); and Australian Welding (our quarterly journal) • Invitations to a range of events, from technical presentations and site visits to discussion groups and more • Special trade offers and discounts from a range of suppliers and businesses, such as discounts on BOC equipment purchases, and gas and cylinder rental charges. We are set to announce several new offers in the near future • Access to a ‘Hotline’ service. The purpose of the Hotline is not to provide a solution, but to advise the enquirer on practical next steps. For further advice, Weld Australia’s

•

highly experienced welding consultants can speak to you over the phone or visit your site in person The opportunity to use the Weld Australia logo to demonstrate your membership of the peak body for welding in Australia, highlighting a point of difference to your clients. Note that this is subject to membership type and some usage restrictions. For advice, please contact membership@ weldaustralia.com.au Discounts on Weld Australia’s range of training and certification courses and programs

Get to Know Your Local StateBased Division Committee Did you know that Weld Australia has local Division Committees in all Australian states? The Committees work hard to be a conduit between Weld Australia and the industry. Over the next few months, we will feature a State Committee in each edition of Weld Connect. You can also meet your Division Committee members at many of our regular, free-to-attend Member

July 2019

Events. Upcoming events can be found both in Weld Connect, and via the ‘Events’ section of the Weld Australia website. To make contact with your local Division Committee members, simply email your enquiry to membership@weldaustralia.com.au Your Feedback Is Sought Weld Australia is currently reviewing the benefits included in your membership. We want to ensure that they offer value for money, meet your needs and are relevant to the industry at large. As such, if you have an idea or suggestion—be it for a member event, an article, or a new member benefit—email membership@ weldaustralia.com.au Membership Renewals On 30 June 2019, all unpaid Weld Australia memberships lapsed. The associated Member Login details will soon be deactivated. However, we understand that things can go amiss. So, if you have any queries regarding your membership renewal, please feel free to contact membership@weldaustralia.com.au

Weld Connect

Page 7

Pipeline Repair, Hot Tapping & In-Service Welding Course Registrations Now Open Perth, 7 & 8 August 2019 Registrations are now open for the Pipeline Repair, Hot Tapping & In-Service Welding course to be held in Perth on 7 and 8 August 2019. Presented by international expert Bill Bruce, this course provides an in-depth overview of the various aspects of pipeline modification and repair (full encirclement sleeves, hot taps, and so on) and addresses common concerns around welding in-service pipelines. The course is designed to help avoid pipeline shutdowns and interruptions of service, bolstering both economic and environmental benefits for operators and welders alike. Plus, repairs can be undertaken efficiently, effectively and with full confidence.

https://weldaustralia.com.au

02 8748 0130

events@weldaustralia.com.au

New South Wales Division News The New South Wales Division recently facilitated a site tour and presentation at S&L Steel. The event proved very popular was very well received by all in attendance. Weld Australia would like to thank S&L Steel for hosting the highly informative and engaging event. S&L Steel was founded in 1974 and has provided steel fabrication services to several industries across Australia, including construction and mining. An established leader in structural steel fabrication, engineering and erection services, S&L Steel has been servicing the needs of Australian clients and the community, for over 40 years. Today, S&L Steel is one of the largest fabrication and engineering companies in New South Wales. With ISO 9001:2008 certification and RMS pre-qualification, S&L has carried out several important infrastructure and commercial projects. These projects include bridgeworks for the upgrade of the Pacific Highway, the Desalination Plant in New South Wales, City Walk Pedestrian Bridge Barangaroo, and Rooty Hill Baseball Stadium.

which include two 60 tonne overhead cranes in the workshop, which can transfer product between the fabrication, paint-shop and despatch areas. To complement the workshop, there are six full factory length overhead cranes (with a capacity of 12.5 tonnes each). To supplement the overhead cranes, there are also 20 boom hoists, each with 1 tonne capacity located throughout the workshop. Plus, with over 6,000m2 of open yard space, S&L Steel can also accommodate a number of large projects at any given time. They can even conduct trial assemblies within their yard if required.

Save the Date Upcoming Events The next New South Wales Division has already earmarked two dates for upcoming events: • Thursday 29 August • Thursday 26 September So please be sure to ‘Save the Dates’ in your diary. Invitations will be emailed to all members as soon as possible, and further details will be made available in upcoming editions of Weld Connect. For further information, email:

membership@weldaustralia.com.au

Whether you’re building a bridge, pressure vessels, dust collectors, recycling plants or mining facilities, S&L Steel provides certainty of quality, delivery and integrity. Site Tour S&L Steel are currently involved in the fabrication and welding of a very unique bridge—it features curves, rather than the usual straight lines. This shop-floor visit offered an invaluable opportunity for attendees to see how work on the project is progressing.

Attendees tour S&L Steel’s facilities.

Attendees also had the opportunity to take in S&L Steel’s facilities, New South Wales Division Contact Paolo Corronca Qualification & Certification Manager 0438 012 099 p.corronca@weldaustralia.com.au

Attendees at the recent presentation by S&L Steel. In the foreground, there is a model of the unique bridge that S&L Steel is currently fabricating.

Page 10 | WELD CONNECT | February 2018

July 2019

Weld Connect

Page 10

Victoria Division News Bombardier Wins Order to Supply 12 Commuter Trains Mobility solution provider Bombardier Transportation has received a contract variation from the Government of South Australia for 12 three-car A-City electric multiple unit (EMU) trains. This latest order will increase Bombardier’s fleet of A-City EMUs to a total of 34 trains and provide a much-needed capacity increase on Adelaide’s suburban rail network. Bombardier has been delivering Adelaide DMU’s since 2005. Since 2011, their Dandenong facility in Victoria, Australia has been involved in delivering the Adelaide A-City EMU fleet. Their local engineers have developed an in-depth knowledge of Adelaide’s rail network over these years, information which enabled Bombardier to propose the most efficient and network-friendly EMU solution which has resulted in high reliability and availability of trains, reduced operational cost and increased performance. Wendy McMillan, President, South East Asia and Australia Region, Bombardier Transportation, said, “Since 2005, Bombardier has been supporting Adelaide’s mobility needs with its diesel and electric commuter trains and this contract variation is another huge endorsement of our workforce

and the quality of the products designed, built and maintained here in Australia.” She added, “We are proud to deepen our long-term partnership in this important market, built on a strong track record of delivery performance, best-in-class rail technology and value-adding long-term solutions; which has laid the foundation to further support South Australian Government’s great efforts to meet a higher demand for public transport that will ensure the comfort and ease of every passenger’s journey.” Changes to the Victoria Division Committee The Victoria Division Committee has recently undergone some changes. Melissa Odendaal (Welding Engineer, Wood Group) has been nominated as Chairperson of the Victoria Division Committee. In addition, we recently welcomed Jeffrey Dickins (Welding Inspector, Bombardier Transportation) as the newest member of the Victoria Division Committee. Victoria Division Contact Victor Blain Senior Welding Engineer 0409 823 991 v.blain@weldaustralia.com.au

Save the Date Upcoming Event Close Proximity Exposure for Radiography This event will lead you through the latest technology solution in achieving close proximity radiography. SafeRad, one of the world leaders and pioneers in this field, will take you through the current state of play in regards to the dangers and the costs with current practices before presenting how new technology available will address a range of benefits for your business. Using SafeRad’s GammaBlok, the session will demonstrate some of the benefits of the new technology such as being able to eliminate the need to evacuate personnel, higher production rates as a number of units can be operated simultaneously in a small area and having the versatility to be suitable for a variety of radiation shielding applications. About the Presenter Malcolm Wass will facilitate this event. Malcom is the designer and inventor of the SafeRad Close Proximity Radiography System and GammaBlok Radiation Shielding. Malcolm brings to the session his in depth knowledge and experience in developing this technology. Event Details • Date: 25 July 2019 • Time: 5:30pm to 7:30pm • Location: SafeRad Building, 3 Fink Street, Williamstown North, 3016 For further information, email:

membership@weldaustralia.com.au

Bombardier Transportation wins order to supply 12 commuter trains.

July 2019

Weld Connect

Page 11

South Australia Division News The South Australia Division recently hosted a technical event on the topic, The Effect of Shielding Gas Composition on Welding Performance. The event was very well received by all in attendance. Weld Australia would like to thank both Australian Welding Solutions (AWS) and Coregas for hosting the event. This important session took attendees through the effects of shielding gas composition on welding performance for steel and stainless steel. The selection of gas mix significantly impacts the quality of the weld so it is crucial to have a understanding of gas choice to deliver a quality weld at a lower cost. This important presentation demonstrated the effects and gave attendees a sound understanding of the science behind gas selection. The event integrated theory and practical behind the gas constituents and explained why the gas mix is an essential variable in a welding procedure, with a range of gas mixes being available demonstrated.

This strategic partnership coincided with the establishment of the Advanced Welder Training Centre,at TAFE SAâ&#x20AC;&#x2122;s Regency Campus. The centre is equipped with welding simulators and other state-of-theart equipment, and will help ensure SA is prepared to meet the demand created by the Naval Shipbuilding program. It has been predicted that over 1,000 welders will be needed from 2020-2027 during this ambitious, long-term project.

Attendees also heard more about the recent partnership forged between Weld Australia and AWS. Weld Australia recently signed an MoU (Memorandum of Understanding) with AWS with the goal of providing quality training and technical services to the Australian welding industry.

About the Presenter: Dr Rahim Kurji The Lead Engineer at Australian Welding Solutions, Rahim completed his PhD in Mechanical Engineering in 2017, focusing on Hydrogen Assisted Cold Cracking. Rahim is an experienced Professional Engineer, with just

Dr Rahim Kurji (Lead Engineer, AWS).

Neville Cornish (Managing Director, AWS).

Attendees at the presentation.

Attendees tour the AWS facilities.

AWS has been providing expert welding and inspection training for over a decade, but working together with Weld Australia will help both organisations create better solutions for the future of welding in South Australia.

July 2019

under a decade of experience working in the field of asset integrity management. As a QA/QC specialist with in-depth knowledge in advanced manufacturing, he works extensively with crossfunctional engineering teams providing insight into the overall strategic direction and subjectspecific expertise in addition to onsite troubleshooting. Rahim also facilitates several Professional Development Courses and Lectures on occasion at the University of Adelaide. In 2015, Rahim was the recipient of a WTIA (now Weld Australia) Award, which recognised him as an outstanding individual contributing to technological innovation in the welding industry. South Australia Division Contact Brian Rungie National Manager Strategic Partnerships 0438 588 214 b.rungie@weldaustralia.com.au

Weld Connect

Page 12

2019 South Australia Conference & Trade Exhibition 4-6 November 2019, Adelaide Convention Centre Presented by Australian Institute for Non-destructive Testing The 2019 AINDT Conference will be a three-day gathering of NDT & CM experts from a wide range of industry, research and academic backgrounds including; mining, defence, oil and gas, offshore, pipelines, power generation, petrochemical, manufacturing, fabrication and construction.

REGISTRATIONS OPEN!

Early Bird Rates extended to end of August. We also remind Delegates that there are additonal opportunities to be part of the event and gain some great industry exposure by...

EXHIBITING WITH A STAND TAKING UP A SPONSORSHIP PACKAGE PRESENTING A TECHNICAL PAPER This will be essential for all people in the Welding sector to further their knowledge-base, and network with leading experts on a variety of topics related to welding technology within the NDT and CM industry.

For more information about registering as a Delegate, Exhibitor, Sponsor or Submitting a Paper, contact the Federal office of AINDT on +61 03 9328 8831 or visit ndtsa.com.au Gold Sponsor

Silver Sponsor

Queensland Division News The Queensland Division recently hosted an event at the Acacia Ridge Campus of TAFE Queensland SkillsTech, focused on the topic: ISO 9606: the Future of Australian Welding Industry using Augmented Reality Welders. To deliver the highest quality workmanship and products possible, a team of well-trained welders who possess not only the skills but also the knowledge to deliver the work is required. In particular, in-depth knowledge of the requirements outlined in ISO 9606 Qualification testing of welders - Fusion welding is essential. At this recent event, attendees had the opportunity to learn more about the role of the augmented reality welding solutions in complying with ISO 9606 and the benefits that certification according to the Standard can

offer to Australian welding and fabricating companies. Attendees took a guided tour of the new state-of-the-art augmented reality training labs at SkillsTech. These labs are equipped with the cutting-edge Soldamatic welding simulators. This new technology offers an enhanced version of reality by overlaying digital and auditory information on top of real-world images to generate a real-time digital video of a weld, which appears to the user as a realistic metal weld with sparks, fumes and molten metal. While nothing beats on the job training, these new augmented reality welding machines provide welders a safe way to train, gain skills and build their confidence before being placed in a real-world welding workshop.

About the Presenter: Garry Hargreaves (Corporate Solution Manager, TAFE Queensland SkillsTech) Garry has extensive experience managing educational and training based projects, ensuring delivery of client-focused enterprise solutions. With over 20 yearsâ&#x20AC;&#x2122; experience in the information technology and training sectors, Garry is clientcentric and a serial innovator who has a real passion for learning regardless of the modality. His expertise includes strong project management and people skills, excellent technical knowledge and implementation focus. Garry provides training solutions to coal seam and liquid natural gas enterprises like: Santos, Origin, Bechtel, Energex, and Transfield. Weld Australia would like to thank Garry Hargreaves for presenting the session, and TAFE Queensland SkillsTech for hosting the event.

Garry Hargreaves demonstrates how to use the welding simulator.

An attendee at the ISO 9606: the Future of Australian Welding Industry using Augmented Reality Welders event tries his hand on the welding simulator.

L to R: Mark Sullivan and Garry Hargreaves.

Queensland Division Contact Abhishek Trivedi Senior Welding Engineer 0409 670 433 a.trivedi@weldaustralia.com.au

Attendees at the ISO 9606: the Future of Australian Welding Industry using Augmented Reality Welders event.

July 2019

Weld Connect

Page 14

Western Australia Division News Today, welding technology is rooted in automation more than ever. As the peak body for welding engineering in Australia, Weld Australia is keen to ensure that its members are up-to-date on new technologies in automation and their industrial applications. As one the most forwardlooking companies in Western Australia, Callidus Welding Solutions is embracing automation and adopting new approaches in welding. In addition, Callidus Welding Solutions achieved certification to ISO 3834 Quality requirements for fusion welding of metallic materials - Part 2 in June 2019. Headquartered in Perth, Western Australia, Callidus Welding Solutions (CWS) is at the forefront of automated welding solutions in Australia, delivering engineering solutions tailored to client specific erosion and corrosion challenges Their highly trained team provides significant experience in the joining, rebuild and overlay of corrosion and wear-resistant alloys for the mineral process, power generation, marine and mining industries. They offer a range of services which are all backed up with fully integrated engineering: • Robotic and automated welding service • Fabrication of process equipment • Repairs and maintenance of inservice equipment • Onsite personnel supply • Surface engineering • Inspection and planning CWS boasts a squadron of Panasonic TAWERS TIG / MIG systems, complete with arc voltage control and harmonised dual external axis for controlled component manipulation and constant weld travel speed to ensure complete compliance to weld procedure specifications. Over time, CWS has integrated a number of additional systems to assist with efficiency and ensure processes are carried out to the highest quality. These systems are outlined below.

Western Australia Division Contact Mehdi Tajfar Welding Engineer 0417 044 370 m.tajfar@weldaustralia.com.au

Weld Camera Monitoring Systems These enable CWS to view in real time, what is happening in and around the weld area, which assists with the continuous improvement of their processes. Off-Line Programming System Off-line programming systems allow CWS to maximise the productivity of their equipment. Without disruption to production, the Panasonic DTPS III software allows CWS to: • Review the visual workspace to avoid reach and collision issues • Prove out tooling and fixtures during the design phase • Produce and fine tune the welding process Automatic Electrode Changing Systems These systems eliminate the need for weld cycle interruptions for manual electrode changeouts, ensuring maximum efficiency without compromising quality. The

calculated efficiency on a number of titanium hard facing cycles is a reduction in time of ~50% resulting in faster lead times and increased capacity through the department. Bespoke GTAW Cladding Attachments for Internal CRA Overlays of Valves and Spooling CWS successfully integrated an internal cladding torch to their automated systems, which is now a unique piece of equipment. It allows them to offer solutions to the oil and gas industry for CRA overlaying of carbon steel valves or process spooling. Weld Monitoring and Management Software This software is utilised by CWS for PQR records, live monitoring of parameters to ensure WPS compliance, and tracking and management of system efficiencies to ensure continuous improvement of their procedures.

GTAW cladding attachment.

Off-line programming system.

Automatic electrode changing system.

July 2019

Welding camera monitoring system.

Weld Connect

Page 15

Northern Territory Division News Department of Defence Denies Planning for Darwin DeepWater Port The Department of Defence has denied reports that it has been “secretly planning” a new port facility near Darwin to support the deployment of US Marines in Australia for training. A report from the ABC last week claimed that anonymous government officials revealed plans to develop the Glyde Point area into a deep-water port, which would be capable of accommodating large warships.

which was followed by the Pentagon revealing they were looking to request to have a permanent naval base in Australia.

Northern Territory Committee Expressions of Interest

This article originally appeared in Defence Connect.

We are currently seeking expressions of interest for new Northern Territory Committee members. The application process is open to all Weld Australia members with an emphasis on the shipbuilding and rail industries, as well as the consumables industry.

Investing in Territory Infrastructure to Lead Talks with Federal Treasurer Northern Territory Treasurer Nicole Manison travelled to Melbourne in early July to meet with Federal Treasurer Josh Frydenburg—their first meeting since the Federal election earlier this year.

These conditions would be “ideally suited for more than 2,000 Marines and their equipment” that complete regular rotations in the region. However, a release from the Department of Defence poured cold water on the report and reads as follows:

Manison will continue to push the Federal Government to invest in vital infrastructure in the Territory – including the job-creating Ship Lift. The Ship Lift will stimulate the Territory economy, create local jobs and help position Darwin as a marine maintenance and servicing hub.

“The Department of Defence has not engaged in any classified or unclassified planning with respect to developing, funding or supporting an alternative military, commercial or mixed-use port at Glyde Point or elsewhere in the vicinity of Darwin.”

Investment into other critical infrastructure projects like roads will also be on the agenda, and follows calls from the Reserve Bank for more federal spending to boost the economy.

“This information was provided to journalists last week.”

Treasurer Manison will also be seeking a commitment from the Federal Government on long-term GST funding for the Territory.

“Any proposal for a facility at Glyde Point, or elsewhere in the Northern Territory, is a matter for the relevant Northern Territory authorities.”

According to Manison, “The Federal Government must invest in the Territory – particularly into

To submit your expression of interest, please email

membership@weldaustralia.com.au

projects that will create local jobs and provide significant economic stimulus such as the Ship Lift project. The Ship Lift has the potential to create hundreds of jobs in construction and create jobs for years to come. The NT Government is investing $100 million into this project because it’s good for the Territory. Canberra must invest in it because it’s good for the nation.” “The Federal Government also needs to stick to their promise that no state or Territory will be worse off under their new GST legislation. We have already seen deep cuts to our GST of over $500million per year, more cuts would only mean more pain for the Territory,” said Manison.

In 2015, Darwin port was controversially leased to Chinese company Landbridgefor 99-years, Northern Territory Division Contact Abhishek Trivedi Senior Welding Engineer 0409 670 433 a.trivedi@weldaustralia.com.au

July 2019

Weld Connect

Page 16

Tasmania Division News Welding Trainees Ready to Manufacture a Bright Future Ten participants recently completed a 15-day, intensive training course in welding and small tool skills at the Tasmanian Minerals, Manufacturing and Energy Council (TMEC) Manufacturing Centre of Excellence in Burnie. Delivered via RDA Tasmania funding as part of the Regional Employment Trial Scheme (RETS), the course was designed by TMEC. Twenty-nine candidates for the course were nominated by Jobactive providers from across North West Tasmania, with 24 undergoing a competitive interview process to qualify for the ten positions. Their dedication and interest was evident in the 100% attendance rate recorded, which will support TMEC’s plans to repeat the training program next financial year. Experienced welders, Ray Woods and Marcus Bonney led the training which utilised the virtual reality welders and augmented reality simulators at the Centre to give students a realistic feel for using the equipment in a safe learning environment. Grinders and drills were also used in addition to machine theory which focused on reading technical drawings in order to mark out, drill and prepare a piece of work.

how their learnt skills are being applied in the region and hear from each employer regarding their needs and expectations when hiring. Participants also took part in mock interviews on two occasions throughout the course to increase their job-readiness. On completion of the course, nine participants received ISO 9606 Certification for a GMAW multi-run fillet weld and small tool operation. TMEC and the course coordinators then facilitated PaTH manufacturing internships for as many participants as could be matched with host businesses. Eight participants have since been placed in a four-week internship with local businesses including Coastal Engineering and Belting, Maltec Engineering, Jensen’s Quality Metal and Iso Tech Engineering. The internships are being supported by a Skills Mentor Pilot program developed by TMEC in conjunction with the Department of Jobs and Small Business to provide each intern with up to 12 hours of on-the-job mentoring. The aim of the Skills Mentor Pilot is to test whether this added support assists the intern to meet the high level of technical skills required in the manufacturing

sector and positively impact their transition to employment. Former Refugees Learn to Weld with TMEC Simulators TMEC also hosted a group of eight men from Afghanistan recently, giving them a ‘taster’ tour of Burnie. The Northern Tasmania Migrant Resources Centre said the partnership was a result of a conversation last year between the Centre and TMEC, discussing a need to fill labour shortages in the North-West. The former refugees said they hoped to get a job in welding here in Tasmania after trying out their skills on cuttingedge simulator training machines at TMEC. The ‘taster’ tour included an official welcome from Burnie Mayor Steve Kons, a greeting from the Devonport and WaratahWynyard mayors and three Burnie worksite visits, as well as a spin on the augmented reality welding simulators at TMEC. The migrants came to Tasmania as part of Australia’s Humanitarian Program and, five years on, many have not been able to find jobs in the fields they worked in pre-arrival. This story originally appeared in The Advocate.

Over the course of the training, the average total arc time on each simulator was more than 43 hours. The holistic nature of the training incorporated three industry tours. Training participants visited Coastal Engineering and Belting, Maltec Engineering and Elphinstone to see Tasmania Division Contact Victor Blain Senior Welding Engineer 0409 823 991 v.blain@weldaustralia.com.au

Participants complete a 15-day, intensive training course in welding and small tool skills at the Tasmanian Minerals, Manufacturing and Energy Council (TMEC) Manufacturing Centre of Excellence in Burnie.

July 2019

Weld Connect

Page 17

Training & Certification News Why Welding Could Be the Career for You Do you want to travel the world? Build race cars, submarines, or huge infrastructure? Would you like to own your own business? Are you a numbers person? Do you love working with your hands, as well as technology? Are you a master craftsman at heart? If you said yes to any or all of these questions, welding could be the fantastic and fulfilling career you’ve been looking for. What is Welding? Welding is a part of everything you see and touch every single day: cars,

bridges, highways, skyscrapers and shopping centres, maybe even your coffee pot. Most welding processes involve a highly-skilled worker using a torch (that reaches temperatures of 1,500ºC) to permanently bond pieces of metal together. Welding can be done anywhere; inside a workshop or outside a construction site, underwater and even in outer space. There really is something for everyone in the welding industry, from hands-on pipe welding to high-tech robotics, and race-car building.

The Perks There are many unique perks of choosing a career in welding. Flexibility Many industries are in need of welders, which means you can choose an industry which best reflects your interests. Plus, it’s usually fairly easy to move across industries if your interests or lifestyle changes. Industries include: • Manufacturing • Construction • Oil and gas • Aerospace • Automotive

Robotics Technician

Construction & Infrastructure

Work with some of the most advanced technology, from robots through to computerised engineering systems in high-tech workshops and plants.

Help build massive skyscrapers, huge monuments, bridges, highways, tunnels or railway lines. As a welder, you could work on some of Australia’s most iconic projects!

Research, Sales & Operations

Inspection & Supervision

Perhaps you want to be a research scientist or a teacher, or work in sales, or maybe even run a business. As welder, you can!

Welding inspectors and supervisors ensure the quality and safety of all welded products and materials. In this type of role you’ll be safeguarding the general public.

Hot Careers in Welding

Underwater Welding

Aerospace Industry

Repair cruise ships and warships or work on underwater pipelines, all while practicing your scuba skills and having the adventure of a life-time.

Why not reach for the stars in your welding career? You might just find yourself welding aerospace industry equipment like rockets and engines.

Motor Racing

Whether it’s Formula One, Bathurst, or a motorcycle grand prix, all motor racing teams have a dedicated inhouse welding team.

Oil & Gas Industry

Opportunities for welders in oil and gas are huge: offshore oil rigs, enormous pipelines, power plants, and a whole lot more.

Defence Industry

From submarines and frigates to helicopters and fighter jets, almost all defence equipment relies on welders during construction.

Page 18 | WELD CONNECT | February 2018

July 2019

Weld Connect

Page 18

Training & Certification News Why Welding Could Be the Career for You (continued) You Don’t Need a Degree One of the best things about going into welding is the accessibility – you don’t need a university degree. You will still need to complete a welding course and gain the reququisite qualification to equip yourself with all the necessary skills to become a professional welder. These courses are generally a lot more affordable than university as well, so you won’t be starting your career off with a lot of debt like many other professionals. A welding course also generally sets you up for an entry-level job, so within a year you can be working professionally as a welder. A Dynamic Industry with a Huge Future Welding is forever changing and growing. There is almost no limit to what welding can do, particularly with new technology like robots, automated systems, powerful lasers and electron beams. Welding is all about high-tech equipment, engineering and maths – not working in a dark, dirty workshop. With the demand for welders on the rise and welding technology becoming so advanced, you have a unique opportunity to learn a skill and have a career that can be shaped around your interests and passions. In welding, there is so much potential for growth and promotions. Discover the World Within welding, there are opportunities to travel through work, which can be ideal for those looking for an adventure. Welding jobs through which you can travel include: • Pipeline installation and repair • Ship building and repair • Military support • Cruise ship maintenance and support • Underwater welding

Possibility to Grow Like all jobs, the starting pay for most welders is fairly basic, particularly straight out of high school. But, once you have more experience and qualifications, your earning potential definitely increases. In fact, making over $100,000 a year isn’t out of the question, particularly if your workmanship is top notch, you’re working on an oil rig, or you specialise in something like underwater welding. Where to Start? If a career in welding sounds like the right fit for you, you may be wondering where to start. A TAFE course or an apprenticeship are both great ways to try your hand at welding and find out for yourself all the great things about a welding career.

Page 19 | WELD CONNECT | February 2018

July 2019

Free Weld Australia Student Membership Weld Australia Student Membership is free for currently enrolled students and apprentices completing a welding related vocational training course with an Australian Registered Training Organisation. Student members receive: discounts on Weld Australia products and services; regular industry updates and news; invitations to networking events (free for members); and invitations to technical events, presentations, and site tours (free for members). All you need to do to become a Student Member is visit weldaustralia.com.au and complete the online application.

Weld Connect

Page 19

Training & Certification News International Welding Engineer and Technologist Course 2019 The International Welding Engineer (IWE) and International Welding Technologist (IWT) course is scheduled to begin in September this year. This course has proved popular over the last three years after the introduction of the new course format. Industries around Australia have acknowledged a capability gap when it comes to coordination of welding activities, and now recognise the importance of a Responsible Welding Coordinator (RWC) in controlling the quality of welded product. Many companies require an RWC to ensure compliance with AS/NZS ISO 3834 Quality requirements for fusion welding of metallic materials and ISO 14731 Welding coordination – Tasks and responsibilities. An RWC is typically responsible for the quality, cost, and productivity of all welding related activities within a company. IWE and IWT are recognised as qualifications that meet the recommended technical knowledge requirements for an RWC under these ISO Standards.

How to Enrol You must apply for the IWE or IWT course online: • Go to the Weld Australia website: weldaustralia.com.au • Click on the Training and Certification page • Click on the pink button that says ‘ALL COURSES – CLICK HERE’ (right at the top of the page) • Click on either the: • International Welding Engineer course • International Welding Technologist course • Click on ‘Register’

Early Bird Discount Offer Weld Australia is currently offering an ‘early bird’ discount (on IWE and IWT training and exams) to both companies and individuals: • 10% off if you register and pay for the course before 31 July 2019 • 5% off if you register between 1 and 30 August 2019 After these dates, full course fees apply.

If you are a Weld Australia member, you will then be prompted to enter your membership details. If not, you will need to create a profile. Please note that you are only enrolled once you have provided all the necessary details requested and paid for the course.

will then be required to pay for the course prior to its commencement. If you do not select ‘Save and Pay Later’, none of the information that you have entered will be saved and you will not be registered.

How to Register To register for a course, you need to complete the same process. However, one you reach the payments details, you will need to select ‘Save and Pay Later’. You

Further Information If you require any information, please contact Paul James (Training Manage, Weld Australia) on p.james@weldaustralia.com.au or 02 8748 0150.

Page 20 | WELD CONNECT | February 2018

July 2019

Weld Connect

Page 20

Training & Certification News Weld Australia is the premier welding certification body in Australia. Nationally recognised and accredited by the International Institute of Welding (IIW), Weld Australia offers individual certification in: Welding Specialist, Welding Inspector, Welding Technologist, Welding Engineer AS1796 Welding Supervisor Certificate 10, and AS2214 Welding Supervisor. Key Weld Australia Exam Dates Examinations are generally held in State capital cities around Australia. Locations and start and finish times of examinations will be provided upon confirmation of registration. Upcoming examination dates include: • 22 July – IWE EA3 exam and IWT TA3 exam in Wollongong NSW The National Examination dates to be held in state capital cities where sufficient registrations are received: • 6 November – IWS and National Welding Supervisor Paper A • 7 November – Welding Supervisor B1 and B2 Code exams

Examinations will also be held on other dates in 2019. Keep an eye on Weld Connect or the Weld Australia website for details: https://weldaustralia.com.au. Applying for Exams Exam applications must be submitted online through the WeldQ system. Please login to your WeldQ profile at https://wtia.weldq. com/applicant/login using your WeldQ ID. If you have been issued with qualifications or certifications by Weld Australia or WTIA in the past, a WeldQ account has been created for you with your own unique WeldQ ID. If you do not know your WeldQ ID, please email qnc@weldaustralia.com.au.

Page 21 | WELD CONNECT | February 2018

July 2019

If you have not been issued with qualifications or certifications by Weld Australia or WTIA in the past, you will be required to create a WeldQ account. To create a WeldQ account please go to https://wtia. weldq.com/applicant/login and click on the red button that says ‘Click Here to Create an Account’. Exam applications must be submitted no later than six weeks prior to the exam date. If the exams you are interested in are not listed above please email qnc@weldaustralia.com.au For all exam inquiries, please email qnc@weldaustralia.com.au

Weld Connect

Page 21

Training & Certification News Under the Australian Welder Certification Register (AWCR) system, welders are invited to complete a test that qualifies them to a welding procedure as set out in AS/NZS ISO 9606-1 or AS/NZS 2980. Once qualified, the welder is certified to that procedure, becoming a Registered Welder, and the information recorded in the AWCR. Becoming an AWCR Approved Examiner Weld Australia has recently relaxed the requirements that individuals must satisfy in order to become an AWCR Approved Examiner. In doing so, we hope to see more people applying for, and being successful in, becoming an AWCR Approved Examiner. The new requirements are as follows: • Be a Weld Australia Member or an employee of a Weld Australia Member Company • Be qualified to one of the following: • Welding Supervisor (AS1796 or AS2214) • International Welding Inspector (Standard) • International Welding Specialist • International Welding Technologist • International Welding Engineer • An equivalent certification as verified by Weld Australia, i.e. CSWIP 3.1, CSWIP 3.2 • Have a sound understanding of AS/NZS ISO 9606-1 or AS/NZS 2980 • Be fully conversant with

•

welding safety procedures Study the Approved Examiner Training and complete the Questionnaire

Role of the Approved Examiner The Approved Examiner is the cornerstone of the AWCR. The Approved Examiner has complete responsibility for carrying out weld tests and entering the results into the AWCR. As an Approved Examiner you must conduct weld tests at an approved Testing Centre. A Testing Centre is a place determined by an Approved Examiner to meet the requirements set out by Weld Australia. Benefits of Becoming an AWCR Approved Examiner As an Approved Examiner you will be entitled to charge for the following services: • Conducting and examining a weld test. • Mechanical testing. • Inspection of test centres to ensure they meet the required standard set by Weld Australia. For further information, visit: https://awcr.org.au

Approved AWCR Testing Centres New South Wales • lllawarra TAFE: www.illawarra.tafensw.edu.au Victoria • Bombardier Transportation Australia: www.bombardier.com • Box Hill Institute: www.boxhill.edu.au • Robert Vernon: 0487 400 002 or robvernon@bigpond.com • Victorian Testing and Inspection Services: www.victesting.com.au South Australia • Regency TAFE: www.tafesa.edu.au Tasmania • Tasmanian Minerals and Energy Council: http://tasminerals.com.au Queensland • Kangaroo Training Institute: https://kangarootraininginstitute.com.au • TAFE Qld SkillsTech: https://tafeskillstech.edu.au Northern Territory • Charles Darwin University: www.cdu.edu.au Western Australia • Australian Welding Academy: •

http://australianweldingacademy. com.au

QSM Fabrication: www.qsmfabrication.com.au

To register as an Approved AWCR Testing Centre, complete the Application Form and send it to awcr@weldaustralia.com.au.

Page 22 | WELD CONNECT | February 2018

July 2019

Weld Connect

Page 22

2019 Training Calendar Weld Australia delivers a comprehensive range of training and certification services, all of which are designed to help Australian welders and fabrication companies achieve and maintain a competitive advantage. As the premier welding certification body in Australia, an International Institute of Welding (IIW) Authorised Nominated Body (ANB) and an Authorised Training Body (ATB), Weld Australia offers a range of individual certifications, including: Welding Inspector, Welding Specialist, Welding Technologist, Welding Engineer, AS1796 Welding Supervisor Certificate 10, and AS2214 Welding Supervisor. International Welding Inspector - Basic Location

Dates

Adelaide

11 - 15 Nov 2019

Brisbane

2 - 6 Sep 2019

Melbourne

16 - 20 Sep 2019

Sydney

9 - 13 Sep 2019

International Welding Specialist Location

Dates

Brisbane

Week 1: 19 - 23 Aug 2019 Week 2: 30 Sep 2019 - 04 Oct 2019 Week 3: 28 Oct 2019 - 01 Nov 2019 Week 4: 25 - 29 Nov 2019 Week 5: 16 Dec 2019 - 20 Dec 2019

Perth

Week 1: 25 - 29 Mar 2019 Week 2: 29 Apr - 3 May 2019 Week 3: 20 - 24 May 2019 Week 4: 17 - 21 Jun 2019 Week 5: 15 - 19 Jul 2019

Sydney

Week 1: 5 - 9 Aug 2019 Week 2: 16 - 20 Sep 2019 Week 3: 14 - 18 Oct 2019 Week 4: 18 - 22 Nov 2019 Week 5: 9 - 13 Dec 2019

International Welding Inspector - Standard Location

Dates

Adelaide

IWI-S Part 1: 23 - 27 Sep 2019 IWI-S Part 2: 9 - 11 Oct 2019

Mackay

IWI-S Part 1: 24 - 28 Jun 2019 IWI-S Part 2: 1 - 3 Jul 2019

Melbourne

IWI-S Part 1: 28 Oct - 1 Nov 2019 IWI-S Part 2: 11 - 13 Nov 2019

Sydney

IWI-S Part 1: 23 - 27 Sep 2019 IWI-S Part 2: 19 - 11 Oct 2019

Welding Workshop Supervisor (Blended Learning Program) Location

Dates

Australia-wide 7 Jan 2019 - 20 Dec 2019

July 2019

Weld Connect

Page 23

2019 Training Calendar International Welding Engineer Location

Dates

Wollongong

Module 1: 23 - 27 Sep 2019 Practical Phase: 25 - 29 Nov 2019 Module 2: 2 - 6 Dec 2019 Module 3: 10 - 14 Feb 2020 Module 4: 4 - 8 May 2020

International Welding Technologist Location

Dates

Wollongong

Module 1: 23 - 27 Sep 2019 Practical Phase: 25 - 29 Nov 2019 Module 2: 2 - 6 Dec 2019 Module 3: 10 - 14 Feb 2020 Module 4: 4 - 8 May 2020

Quality Control Welding Coordinator (QCWC) Location

Dates

Sydney

19 - 23 Aug 2019 Welding Technology Appreciation for Engineers (3DE)

Location

Dates

Brisbane

2 - 4 Dec 2019

Sydney

13 - 15 Nov 2019

Perth

4 - 6 Nov 2019

Melbourne

25 - 27 Nov 2019

Hunter Valley

2 -4 Sep 2019

Online & Blended Learning In conjunction with the American Welding Society (AWS), Weld Australia offers online courses to help develop your welding knowledge and to better inform you for your professional development. The content has been developed by senior people within the profession and is regularly updated. These courses are available any time, day and night, and are designed as self-paced modules which will allow the student to complete them in their own time. Courses include: Economics of Welding; Fabrication Maths (Basic and Advanced); Metallurgy (Basic and Advanced); Non-Destructive Testing; Welding Fundamentals (Basic and Advanced); Welding Safety; Welding Sales Representative; and Welding Symbols. In-House Training Weld Australia can present any of its courses to your employees in-house at the location of your choosing. We can also tailor training courses specifically for your company and employees. The Benefits of Training & Qualification Weld Australia training and certification is a strong addition to your career portfolio. It demonstrates to employers that you possess advanced welding knowledge, essential to ensuring the highest levels of workmanship. Qualification demonstrates to employers that you are dedicated to continually learning and growing in your field. These are qualities that are essential for success in team leadership roles or for more complex projects. Designed to provide an interesting and stimulating industrial perspective, all our courses are supported by a broad range of major industry groups and hundreds of Australian companies. Plus, our presenters are all International Welding Engineers or Technologists with extensive industry experience. Further Information For further information, or to enrol in a Weld Australia training course today, please contact: training@weldaustralia.com.au or +61 2 8748 0100, or visit www.weldaustralia.com.au. Weld Australia reserves the right to cancel or change dates of any training course due to insufficient registrations or other reasons beyond its control, and reserves the right to refuse enrolments.

July 2019

Weld Connect

Page 24

Advanced Welder Training Courses Fusion Welding Courses There are two ISO 9606 Qualification test of welders — Fusion welding —Part 1: Steels courses listed on Training.gov.au, the National Register of Vocational Education and Training (VET) in Australia. This is the authoritative source of Nationally Recognised Training and Registered Training Organisations (RTOs). These courses were developed in Victoria in 2018. One is intended for inexperienced welders, the other for experienced welders. Both use augmented reality welding simulators as a key component of the training. Transition Workers To be awarded a certificate for the Course in Fusion Welding to AS/NZS ISO 9606 for Transition Workers, you must successfully complete seven units of competency (four core and three elective). Core units: • Simulate fusion welding processes using augmented reality equipment • Identify welding processes, safe welding practices and use of hand and power tools • Interpret and apply AS/NZS ISO 9606 for fusion welding processes • Perform fusion welding procedures to meet the procedures of ISO 9606-1 (Steels – carbon steels) Experienced Welders To be awarded a Statement of Attainment for the Course in Fusion Welding to AS/NZS ISO 9606 for Experienced Welders, you must successfully complete three units of competency (one core and two elective). The core unit is: Interpret and apply AS/NZS ISO 9606 for fusion welding processes. Elective Units Other elective units available include: • Perform fusion welding procedures to meet the procedures of AS/NZS ISO 9606-1 (Steels – stainless steel) • Perform fusion welding procedures to meet the requirements of • AS/NZS ISO 9606-2 (Aluminium and aluminium alloys) • Perform fusion welding procedures to meet the requirements of AS/NZS ISO 9606-3, 4 or 5 (Exotic metals) • Perform routine manual metal arc welding • Perform routine gas metal arc welding • Perform manual heating and thermal cutting • Read and interpret technical drawings and make measurements for a welding procedure Further Information For further information, please contact: training@weldaustralia.com.au or +61 2 8748 0100, or visit www.weldaustralia.com.au.

Enrol in a Fusion Welding Course Today

You can enrol in a Fusion Welding course through any of the Advanced Welder Training Centres across Australia. These are all listed below. Queensland TAFE Queensland Caboolture Campus https://tafeqld.edu.au Tallon Street, Caboolture, Queensland TAFE Queensland SkillsTech https://tafeqld.edu.au 247 Bradman Street, Acacia Ridge, Queensland South Australia TAFE SA Regency Campus https://www.tafesa.edu.au 137 Days Road, Regency Park, South Australia Tasmania Tasmanian Minerals and Energy Council https://tasminerals.com.au 13 Wellington Street, Burnie, Tasmania Victoria Box Hill Institute https://www.boxhill.edu.au 465 Elgar Road, Box Hill, Melbourne, Victoria Bendigo TAFE http://www.bendigotafe.edu.au 23 Mundy Street, Bendigo, Victoria Federation University https://federation.edu.au Lydiard Street South, Ballarat, Victoria

The Advanced Welder Training Centre at TAFE SA’s Regency Campus.

July 2019

Weld Connect

Page 25

For Your Diary: Upcoming Events Whether you need to brush up on skills acquired years ago, or want to try your hand at something new, there’s sure to be an event for you. Keep in mind that attending Weld Australia events counts towards CPD requirements for certification applications and renewals. For details, contact events@weldaustralia.com.au or +61 2 8748 0100. 22nd International Conference on Composite Materials 2019 Melbourne, 11 to 16 August ICCM is the premier international conference in the field of composite materials, and covers polymer matrix composites, metal matrix composites, ceramic matrix composites, natural fibre composites, fibre metal laminates, fibres and resins and all the other classes of composites. For further details visit: https://iccm22.com Australian International Mining Expo (AIMEX) Sydney, 27 to 29 June AIMEX is the key event on the mining calendar and is an internationally renowned platform which showcases the latest mining technology, equipment and services. Free-to-attend, AIMEX will feature more than 500 suppliers For further details, visit: https://www.aimex.com.au Australasian Coasts & Ports 2019 Hobart, 10 to 13 September Australasian Coasts and Ports 2019 will bring together engineers, planners, scientists and

researchers to Hobart, to focus on the technological, scientific, policy, planning and design issues related to our diverse and developing coasts. For information, visit: https://coastsandports2019.com.au Australian Steel Convention Sydney, 15 to 17 September The Australian Steel Institute’s 2019 Convention looks at current infrastructure opportunities and beyond the project pipeline, focussing on forging deeper and more meaningful commercial links that will see our industry continue to grow and thrive. For further details, visit: https://www.steel.org.au AINDT Conference Adelaide, 4 to 6 November The 2019 AINDT Conference will be a three-day gathering of NDT & CM experts from a wide range of industry, research and academic backgrounds, including mining, defence, oil and gas, offshore, pipelines, power generation, petrochemical, manufacturing, fabrication and construction. For further details, visit: www.ndtsa.com.au

Event Spotlight: 2019 National Manufacturing Summit 22 August, Melbourne Do you struggle to fill vacant positions? Concerned about the future of Australian manufacturing? Want to upskill your workforce with globalstandard training? With the theme of Skills for the Future, the National Manufacturing Summit gathers leading representatives from all major Australian manufacturing stakeholders—business, unions, universities, finance, suppliers, and government—to discuss the sector’s prospects, and identify promising, pragmatic policy measures designed to support an industrial turnaround. The Summit is a must-attend event for anyone with a vested interest in manufacturing, skills, training and apprenticeships. Just some of the speakers include Dr Jens Goennemann (AMGC), Chris Brugeaud (SSS Manufacturing), Adrian Boden (SEMMA), and Professor Michelle Gee (Sir Lawrence Wackett Centre). Weld Australia will host the 2019 National Manufacturing Summit at The Australian Synchrotron in Melbourne on 22 August. Register Now.

NATIONAL MANUFACTURING

SUMMIT 2019 July 2019

Weld Connect

Page 26

Expand Your Audience. Grow Your Business. Advertise with Weld Australia.

Weld Australia is happy to offer you and your business the opportunity to promote your products and services directly to the decision makers in the welding and fabricating industryÂ. We have a range of cost effective advertising and editorial packages available, in both Weld Connect and Australian Welding.

For further information, contact: Donna South on d.south@weldaustralia.com.au or +61 (0)2 8748 0130