2720 Disk Ripper

2720 Disk Ripper

ONE TOUGH RIPPER

The 2720 Disk Ripper allows you to: • Size and manage residue. • Penetrate and shatter the compaction layer. • Bury and mix residue. • Help level the soil profile. • All in one pass. Internal basket scrapers on the knife-edge rolling baskets allow a uniform field finish in sticky conditions. The baskets will not need to be raised up to avoid plugging. The LaserRip™ II ripper points are made of an exclusive cast material making them stronger and more durable than previous ripper points. The LaserRip II feature top-plated wings for improved penetration into hard ground and are recommended in rocky conditions. The unique profile lifts and fractures the soil, fluffing rather than bulldozing and compacting. The wing profile creates less draft, resulting in easier pulling and lower horsepower requirements.

TRANSPORT DIMENSIONS

Model Width Height 2720

Rigid 16 ft. 11 in. to 22 ft. 5 in. (5.16 to 6.83 m) N/A 2720 Gang fold rigid 18 ft. 1 in. (5.51 m) N/A 2720 3-Section

Flex Fold 18 ft. 5 in. (5.61 m) 13 ft. to 14 ft. 8 in. (3.96 to 4.47 m)

Durable design for tough conditions. Featuring a durable gang design with heavier C-springs, floating scrapers, 2-in. (5.1-cm) gang bolt and 24-in. (60.9-cm) blades, the 2720 Disk Ripper is the picture of toughness. Reduce yield-robbing compaction. The 2720 Disk Ripper shatters hardpan soils helping you solve compaction challenges down to 16-in. (40.6-cm) depths. Adjustable depth and basket pressure. TruSet™ technology lets you adjust depth and basket pressure from the cab in seconds. Meeting your tillage needs in fall. The ideal primary tool for low-, medium- and high-level residue crops, it can leave as much as 30- to 45-percent cover on the surface. It sizes residue well to flow through your spring tillage tools, or you can use it as effective one-pass tillage right after harvest.

Consistent disking depth. Even in hard-packed or rocky ground. C-spring standards add both muscle and flex to help protect the gangs from obstacles. Combination scrapers ideal for wet or dry conditions. Rigid position for the heavy-duty combination scrapers is ideal for dry conditions with minimal paddle and blade wear. Selfadjusting position is perfect for wet, sticky conditions. Adjustable rear gang angle. The rear gang angle can be set in one of two positions: 16 degrees for aggressive disking in heavy residue or 14 degrees for best performance in lighter soils and lower residue levels. The front gang angle is fixed at 18 degrees. Slimmer transport. Same toughness. The new slimmeddown 2720 Disk Ripper features a 7-standard narrow transport configuration, folding to 14 ft. (4.3 m) wide to provide an exceptional fit on the road and for storage in your shed.

Hydraulically adjustable rolling baskets. The rolling basket has three positions you can hydraulically control from the cab. Adjust it downward for consistent ground contact, raise it for harsh, muddy conditions, or choose the float position to lightly fluff your soil. Adjust down pressure from the on-implement gauge and control basket position from the cab.