Understand the Different Steps For an Effective Floor Refinish Address: 1822 Willow Ave, Weehawken, NJ 07086, USA Call Us @ 201–330–0909
The 3 major steps are sand cleaning the surface area of the hardwood floor, after that the floor needs to be stained, lastly comes the refinishing stage. Before you start the sanding make sure that most of the furniture is removed from the room. Then check to see if you have nails on the wooden floor. Take them away if you find some. You can get the conventional drum sander or the newest sanding machine. There are different types of sand papers varying in consistency. It is wise to gather a variety of grits. Repair the sand paper that is the bulkiest into the sander. Move the sander along the grain of the wood and do not across it. Remain in motion once the equipment is on. If you want an excellent hardwood floor refinish be sure that after the initial sanding is over you change the heavy sand paper with a brighter one to remove all the spots that still remain. A vacuum is useful in cleaning up the dirt that scatters all over. A great hardwood floor refinishing will need the edging machine that are going to clean the edges too. The bleaching is a critical stage that should be done with care. Ventilating the place is important to drive away the dust. With a small quantity of color on a cloth try it out in a corner of the floor to see if you have the desired effect. Use the stain with long strokes equally. Let it dry. Apply another coat for the right color. The refinishing is finalized when you have implemented the polyurethane on it. Before applying shake it properly to mix air with it. After the first use allow it to dry. Repeat the method and let the floor dry out for three days before you begin using it. For more information on installing wood floors, visit Wood Floor Planet, New Jersey, a website that specializes in providing helpful flooring tips, advice and resources.