WorkBoat December 2016 by WorkBoat

Boatbuilding Review • WorkBoat Show • Crescent Tugs ®

IN BUSINESS ON THE COASTAL AND INLAND WATERS

DECEMBER 2016

TO P TE N

2016 NO

V. 3

DE C

,2 01

NEWS STORIES OF

WB_CVR_LINO_A.indd 2

11/7/16 1:52 PM

ACT GREEN THINK YELLOW

Booth 2701,2801

Lower emissions, fuel savings, and 0% financing for 12 months. Emissions regulations might give your business an unexpected boost – if you’re thinking of investing in one of our reliable yellow engines. Our current repowering offer not only brings you in line with EPA Tier 3 but it will also pay for itself thanks to impressive fuel savings. Not to mention a helpful 0% financing deal for the first 12 months. Get onboard the Cat ® Engine Repower for Profit Program and choose from our full range of US EPA Tier 3 C9.3 generator sets. Contact Louisiana Cat at 866-843-7440 to start building the package that is right for you.

OUR NEW 9 LITER ENGINE, THE C9.3

LouisianaCat.com Must be a Caterpillar Marine Engine used for vessel Repower and approved by Marine Territory Sales Manager. Program is valid through December 31, 2016. © 2016 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, ”Caterpillar Yellow,” the ”Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

WB_CVRS.indd 2

10/25/16 3:09 PM

Booth 2249

WB_FULLS.indd 1

11/7/16 3:48 PM

Close to you whenever you need us.

Booth 2601

MTU. Going the >EXTRA MILE<. The world’s most rugged and reliable engines, seamlessly integrated by MTU’s system expertise, meet every individual demand. With these IRONMEN engines—backed by customizable service solutions from MTU ValueCare and global support from over 1,200 authorized locations worldwide—we’re here to keep you working. Whenever. Wherever. www.mtu-online.com

Series 4000

WB_FULLS.indd 2

11/7/16 3:49 PM

ON THE COVER

A semisubmersible in the Gulf of Mexico. Photo by Mieko Mahi DECEMBER 2016 • VOLUME 73, NO. 12

F EA

36 Co

RES ver St ory: Top 10 News Stories

The offshore oil and gas slump heads up WorkBoat’s top news stories of 2016.

126 Ca

rnival T ime

Coverage of the 37th International WorkBoat Show to be held at the Ernest N. Morial Convention Center in New Orleans from Nov. 30-Dec. 2, 2016.

127 WorkBoat Annual Conference schedule and descriptions. 132 WorkBoat Show exhibitors list and contact information. 152 WorkBoat Show new products.

BO A TS 26 On

& GEA

t he W ays

• E.N. Bisso christens a new 5,362-hp ASD tug at Signet Shipbuilding in October • First of 10 new 49-passenger water taxis for Baltimore from Maritime Applied Physics Corp. • Miller Marine builds new 78' cargo ferry for Fire Island Ferries • Bay Welding Services delivers new 30' aluminum monohull passenger boat to Alaska Wildland Adventures • Gulf Island Shipyards delivers the third of three 10,000-hp linehaul towboats to Marquette Transportation • Lind Marine purchases aluminum boatbuilder Moose Boats • Lake Assault Boats delivers 28' landing craft-style fi eboat to the Newburgh (N.Y.) Fire Department • The Shearer Group has designed a 200'×35' double-hull tank barge for C&C Marine and Repair • ABD Boats has launched a 5,360-hp Z-drive tug for Saam Smit Towage • Marquette Transportation has taken delivery of a 2,000-hp Z-drive towboat from Master Marine designed by Entech Designs

68 2 016 B oatbuilding Re view Highlights of the boats that appeared in WorkBoat from December 2015 through November 2016.

122 St eel C owboys New 5,500-hp tugs for Crescent Towing meet customers’ demands for more power and more maneuverability.

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_TOC_LINO.indd 3

68 3

11/7/16 5:30 PM

DECEMBER 2016 • VOLUME 73, NO. 12

A T We provide custom training Solutions for One individual or to large fleets · Emergency Response · Shipboard Safety · Basic Safety Training · Marine Fire Training

Building a culture of safety since 1989.

G L A N C E

12 O n t he W ater: Navigation ‘Twilight Zone’ — Part II. 12 C aptain’ s Table: Saluting pioneer rivermen. 13 O SV Da y Ra tes: Be prepared for OSV bankruptcies. 14 WB St ock In dex: Stocks tread water as operators slide. 16 In land In sider: Low energy prices and transportation. 16 In surance W atch: Seek help when choosing insurance. 18 L egal Talk: Dockowner found liable for unsafe berth.

122

N EW S L O G

TRAINING THAT WORKS FOR YOU!

20 New safety rules called for after British Columbia diesel fuel spill. 20 ABS to provide audits of AWO’s Responsible Carrier Program. 21 Alaska landing-craft prototype, the Vigor-built Susitna, is finally sold 22 Corps needs several billion for East Coast beach replenishment. 22 NTSB blames high water and downstreaming in 2015 towboat accident. 22 Marad awards grants for containeron-barge and ferry projects.

DE P A R TM CALL for yourself or for your fleet and get a customized training solution.

Fremont Maritime Services Fishermen’s Center Building 1900 West Nickerson Street, Suite 200 Seattle, WA 98119 (206) 782-4308 1-888-STAY-LOW www.fremontmaritime.com 4

WB_TOC_LINO.indd 4

126

E N TS

Ed itor’ s Watch

M ail Ba

156 P ort o f C all 163 Ad vertisers In dex 164 WB L

ooks Back

www.workboat.com • DECEMBER 2016 • WorkBoat

11/7/16 5:30 PM

Booth 1849

WB_FULLS.indd 5

10/25/16 2:56 PM

MAINE

HAMILTON

MARINE

PORTLAND ROCKLAND SEARSPORT SOUTHWEST HARBOR JONESPORT

High Performance LED Lights M-Series patented specter and hybrid optics in various sizes. High purity aluminum housings.

FROM

11399

Search# RIL-

Commercial Bumper

3-1/8" Base Width, 2-7/8" High, 11/16" Wall Thickness. 60 ft lengths. Not Pictured Actual Size

DAM-DB-75 Order# 107128

1549 FT

Premium Adult Universal Immersion Suit USCG APPROVED

High visibility yellow inflatable head pillow, face mask, mitts and ankle adjustments. Includes buddy line and whistle.

24999

KNT-1540-AU Order# 753274

Adult Universal Cold Water Immersion Suit

Ed itor'sWat ch

It’s time to show off

t’s that time of the year again — time for another International WorkBoat Show. The 37th installment of the show kicks off on Nov. 30 in New Orleans and runs through Dec. 2. Each year, the show is a must for the industry, a chance for companies to show off the latest products and services. And once again in our annual WorkBoat Show issue, we show off what this industry is all about — building some of the world’s best and most diverse brownwater vessels, from ferries to towboats to tugs to patrol boats and fireboats. In our annual Boatbuilding Review that begins on page 68, we feature these vessels and barges, about 50, that appeared in the pages of WorkBoat over the past 12 months. Of these boats, we will once again honor 10 of them in a special breakfast ceremony before the show opens on Thursday, Dec. 1. From these 10 Significant Boats, we will choose WorkBoat’s Boat of Year for 2016. This year’s list includes two fireboats, a tug, a towboat, a passenger vessel, a patrol boat and a pilot boat. Each year in this issue, we also highlight the top 10 news stories of the year. Again, the top story is the offshore energy slump. Yes, it continues to be extremely tough for those with close ties to the offshore sector, but there were other big stories out there that highlight the diversity of the workboat industry. One of these stories was offshore wind energy, which finally got going in U.S. waters in 2016. A year after installing foundations from Gulf Island Fabrication, Houma, La., Deepwater

Dav

i d Kr apf

, Edi

tor i n C hi ef

Wind LLC erected five 6-MW GE Haliade turbines at its Block Island, R.I., location. The big part of the story for the workboat industry was on the water, where the first U.S.-built offshore wind crew transfer vessel, the Atlantic Pioneer, was christened in April by Atlantic Wind Transfers of North Kingston, R.I. The $4 million, 70'6"×24'×4' aluminum catamaran was built by Blount Boats at its Warren, R.I., yard and entered service in May. This is just one example of how diversified this industry is. So be sure to sample this diversification at the WorkBoat Show. See you there.

dkrapf@divcom.com

USCG APPROVED

RVS-1409A Order# 743829

259

Call For Volume Pricing 800-639-2715 hamiltonmarine.com 6

WB_EditWatch_LINO.indd 6

WORKBOAT® (ISSN 0043-8014) is published monthly by Diversified Business Communications and Diversified Publications, 121 Free St., P.O. Box 7438, Portland, ME 04112-7438. Editorial Office: P.O. Box 1348, Mandeville, LA 70470. Annual Subscription Rates: U.S. $39; Canada $55; International $103. When available, extra copies of current issue are $4, all other issues and special issues are $5. For subscription customer service call (978) 671-0444. The publisher reserves the right to sell subscriptions to those who have purchasing power in the industry this publication serves. Periodicals postage paid at Portland, ME, and additional mailing offices. Circulation Office: 121 Free St., P.O. Box 7438, Portland, ME 04112-7438. From time to time, we make your name and address available to other companies whose products and services may interest you. If you prefer not to receive such mailings, please send a copy of your mailing label to: WorkBoat’s Mailing Preference Service, P.O. Box 7438, Portland, ME 04112. POSTMASTER: Send address changes to WORKBOAT, P.O. Box 1792, Lowell, MA 01853. Copyright 20 16 by Diversified Business Communications. Printed in U.S.A.

www.workboat.com • DECEMBER 2016 • WorkBoat

11/8/16 10:43 AM

S:7”

An oil that thrives under pressure. With Mobil Delvac 1™ ESP 5W-40, your workboat can go up to ten times longer between oil drains. Engineered to provide superior protection, it helps extend service intervals and reduce waste oil. Learn more at mobildelvacmarine.com

S:10”

Visit us at the International WorkBoat Show November 30 to December 2 Booth 2919

WB_FULLS.indd 7

10/25/16 2:56 PM

DIESEL 80 gp FIRE PUMP m, U.s.c.g 60 psi for un inspec ted

www.workboat.com

PUBLISHE R EDITOR I N CHI

CONT

Jerry Fraser jfraser@divcom.com

David Krapf dkrapf@divcom.com

SENIOR E DITOR

Ken Hocke khocke@divcom.com

ASSOCI

ATE EDITOR

Kirk Moore kmoore@divcom.com

ONL

INE EDITOR

Ashley Herriman aherriman@divcom.com

RIBUT

ING WRI

TERS

ART DIRECT OR

PUBLISHI NG OF

FICE S

Capt. Alan Bernstein • Bruce Buls • Michael Crowley • Dale K. DuPont • Pamela Glass • Max Hardberger • Kevin Horn • Joel Milton • Bill Pike • Kathy Bergren Smith Dylan Andrews

Main Office: 121 Free St., P.O. Box 7438 • Portland, ME 04112-7438 • (207) 842-5608 • Fax: (207) 842-5609 Southern/Editorial Office: P.O. Box 1348 • Mandeville, LA 70470 • Fax: (985) 624-4801

DIESEL

Subscription Information: (978) 671-0444 • cs@e-circ.net General Information: (207) 842-5610

PORTABLE PUMPS

SHIP IN STOCK & READY TO

ADVERTISING PRODUCT

ION & PROJ

EASTERN U.S

STERN U.S

ADVERTISING ECT M ANAGE R

. AND CANADA EUROP E

. AND CANADA PACI FIC RI M

Booth 1235 SOUT

GULF / S OUT H E RN U.S . H AND CE NTRAL AM ERICA

Wendy Jalbert 121 Free St., P.O. Box 7438 • Portland, ME 04112-7438 (207) 842-5616 • Fax: (207) 842-5611 wjalbert@divcom.com

Kristin Luke (207) 842-5635 • Fax: (207) 842-5611 kluke@divcom.com

Susan Chesney (206) 463-4819 • Fax: (206) 463-3342 schesney@divcom.com

Jeff Powell (207) 842-5573 • Fax: (207) 842-5611 jpowell@divcom.com David Cohen (207) 842-5496 • Fax: (207) 842-5611 dcohen@divcom.com

EXP OS ITIONS

EXP OS ITION S AL ES DIRECT OR

PRESIDENT & EXECUT

WB_Masthead_LINO.indd 8

IVE VICE

CE O

P RESIDENT

(207) 842-5508 • Fax: (207) 842-5509 Producers of The International WorkBoat Show, WorkBoat Maintenance & Repair Conference and Expo, and Pacific Marine Expo www.workboatshow.com Chris Dimmerling (207) 842-5666 • Fax: (207) 842-5509 cdimmerling@divcom.com Theodore Wirth Michael Lodato mlodato@divcom.com

www.workboat.com • DECEMBER 2016 • WorkBoat

11/7/16 3:17 PM

Booth 2 4 2 7

WB_FULLS.indd 9

10/27/16 3:30 PM

Safety alert: Don’t ignore alarm systems

he Coast Guard has issued safety alert 16-16 to remind mariners of the potential dangers that can occur when alarm systems are deliberately ignored. Recently in the Pacific Northwest, Coast Guard marine inspectors experienced two different circumstances involving the alarm and control system of steering gears onboard relatively new Mitsubishi Heavy Industries’ vessels. Although neither event resulted in a marine casualty, they serve as a reminder to the potentially dangerous results that may occur when an alarm system is deliberately ignored. A false sense of operational safety develops when crewmembers continually silence what they consider to be a “nuisance alarm,” which enables a false perception of normalcy to develop. Inspectors observed on two vessels

that repetitive alarms occurred every time crewmembers performed steering tests that attempted to move the rudder through its range of motion. The alarms indicated that “hydraulic lock” events had occurred. Each time, the alarm was simply acknowledged by the crew and the steering gear adequately moved the rudder. However, no further investigation was conducted to identify the cause of the alarm. As the result of these events, the Coast Guard strongly recommends that owners and operators ensure the following: • Address the management of nuisance alarms in Safety Management Systems and require immediate correction of their specific causes; and • Include strict prohibitions against the pinning or securing of alarm acknowledgment buttons and switches. Such actions should be deemed as unacceptable corrective measures as they have contributed to serious marine

casualties in the past. For additional details, please view the entire safety alert at https://www. uscg.mil/hq/cg5/cg545/alerts/1616.pdf L t. K at i e Br ay nar d U.S. Coast Guard Public Affairs Washington, D.C.

WorkBoat encourages readers to write us about anything that appears in the magazine, on WorkBoat.com or pertains to the marine industry. To be published, letters must include the writer’s address and a daytime phone number.

Send letters to: MAIL B AG P.O . B OX 1348 Mandeville, LA 7 0470 workboat @cox.net

Booth 2153

the world's first low cost satellite integrated tablet. THORIUM X allows your vessel to stay connected in real time, around the globe, in the palm of your hand. • STRONG: Fully rugged and IP65 waterproof. SATELLITE COMMUNICATION

• RELIABLE CONNECTIVITY: Global Iridium connection, Wireless or Cellular.

• REAL TIME DATA: Email service, e-log forms, mapping, weather reports, and much more.

REQUEST A QUOTE HERE:

sales@clsamerica.com · +301 925 4411 · clsamerica.com/thoriumx

WB_Mailbag_LINO.indd 10

www.workboat.com • DECEMBER 2016 • WorkBoat

11/3/16 8:31 AM

WB_FULLS.indd 11

10/25/16 2:57 PM

O n the W a te r Navigation ‘Twilight Zone’ — Part II

By Joel Milton

Joel Milton works on towing vessels. He can be reached at joelmilton@ yahoo.com.

OAA’s new Zones of Confidence (ZOC) diagrams on their nautical charts are being implemented as new chart editions are issued. The new charts are being issued at a rate of about two per month. The diagrams present information (age, position accuracy, depth accuracy and seafloor coverage) in a graded, descending confidence format of ZOC categories: A1, B, C and D, with an additional MD (maintained depth) category, meaning a channel whose depth is maintained and surveyed regularly. Why do users of nautical charts need defined ZOC? Because, according to NOAA, “source data is deficient by today’s standards.” Translation: When you are navigating with today’s electronic navigation aids, taking advantage of the horizontal position accuracy that is far beyond the capabilities of the equipment and methods used to gather the original survey data on the charts, you can

C a p ta i n ’ s T a b l e A life and career on the river

By Capt. Alan Bernstein

Alan Bernstein, owner of BB Riverboats in Cincinnati, is a licensed master and a former president of the Passenger Vessel Association. He can be reached at 859-292-2449 or abernstein@ bbriverboats.com.

WB_AAG_LINO.indd 12

n September I was the keynote speaker at the annual meeting of the Sons and Daughters of Pioneer Rivermen in Marietta, Ohio. The group was established in 1939 in memory of pioneer rivermen and for the preservation of river history. I was extremely honored and humbled by the invitation, but, I thought, what would I tell this esteemed group of river historians? I finally decided to tell them how I became involved in the marine industry and how I grew to appreciate our inland river pioneers. It is a story that has its roots in anything but the rivers. In 1962 my family got its start in the restaurant business in downtown Cincinnati. The next year, we moved to Quito, Ecuador, for five years while my father served as the program director for the U.S. Agency for International Development (USAID). After returning to the U.S., my first job was in 1969 in the Catskill Mountains at Gilbert’s Hotel in South Fallsburg, N.Y. My next job would influence the rest of my professional life. In 1970, I accepted a position on the Delta Queen, and I’ve been hooked on river

end up cutting your margins way too close. It’s the magical thinking that arises from having blind faith in technology without fully understanding its capabilities and limitations. Put another way, if you fix your position using GPS while navigating (we all do it every day) and plot or observe those positions on paper or electronic charts (it doesn’t matter which) consisting of survey data not obtained by GPS fixes of equal quality, then your true relation to those charted depths and any bottom features and obstructions is only approximate at best. It may be off by hundreds of feet. This accurately describes most areas outside of maintained channels or pilotage waters, and even some areas within pilotage waters. Navigators are responsible for knowing this and incorporating it appropriately into navigation procedures. This fact will not change until everything gets resurveyed to the current technical standards of accuracy. Given the costs of such an undertaking and present fiscal realities, the odds of this happening are about zero. So if the areas of the chart you’re operating in aren’t zone categories A1 or MD, you may want to reconsider your previous risk analysis. history and river lore ever since. In 1977, my family purchased the Mike Fink Restaurant in Covington, Ky., from Capt. John Beatty. In 1979, my company, BB Riverboats, was formed and we began booking cruises from the second deck of the restaurant. The company gets its name from the initials of the people who were instrumental in getting the business started — my father Ben Bernstein and Betty Blake. Betty was the president of the Delta Queen Steamboat Company, which was then headquartered in Cincinnati. My father and Betty were close personal friends, and there was no one better than Betty to deal with the challenges of running a riverboat company. Our first cruise on the Ohio River was on March 15, 1980, on the M/V Betty Blake, a 400-passenger sternwheeler that was leased from Pittsburghbased Gateway Clipper Company. Shortly after we opened, we realized that the business was going to be a success. My biggest accomplishment was the co-founding of Tall Stacks Cincinnati. We are trying to put together another one for 2019. I hold a Master of Towing Vessels/Western Rivers, a Masters 1,600-ton/Western Rivers, and a 100-ton/Inland license. I am proud of my story, just one of many that have led to a career on the inland rivers. I am interested in hearing yours. www.workboat.com • DECEMBER 2016 • WorkBoat

11/7/16 10:05 PM

OCTOBER 2016 DAY RATES, FLEET UTILIZATION VESSEL TYPE

O S V D a y R a te s

UTILIZATION

OCT. '16

OCT. '15

OCT. '16

OCT. '15

$ 7,800 $ 9,103 $25,800 $23,800 $30,662

$ 8,574 $15,986 $23,750 $24,340 $32,450

61% 40% 66% 75% 44%

70% 59% 81% 100% 100%

SUPPLY (DWT) 1,999 & below 2,000-2,999 3,000-3,999 4,000-4,999 5,000 & above

Are OSV bankruptcies on the horizon? By Bill Pike

everal workboat operators are now staring at bankruptcy as the only option left. Perhaps the most dramatic case is that of New Orleans-based Tidewater, which was once viewed as one of the strongest offshore service vessel operators in the world. In mid-September, the company received waivers on debt repayment from its lenders that extended payment deadlines to Oct. 12. Unable to fully renegotiate the debt repayment, and unable to pay it in today’s depressed environment, Tidewater was granted additional waivers that extended the repayment deadline to Nov. 11. Another round of waivers is possible, but unlikely, according to the company. The company said that some progress has been made in the debt negotiations, but it concedes that “recent industry data, including data regarding projected levels of offshore drilling activity, a primary driver of activity within the offshore service vessel industry, has led the company to conclude that important debt terms will require further negotiation.”

AVERAGE DAY RATES SEPT. '16

CREWBOATS Under 170' $ 3,230 $ 3,230 $ 3,550 49% 170' & over $ 7,368 $ 7,368 $ 5,967 60% SOURCE: WorkBoat survey of 32 offshore service vessel companies.

Tidewater said that it was continuing to work toward amending its various debt arrangements, but there was a possibility that the company will have to consider other options, including a possible reorganization under Chapter 11 bankruptcy. In this strained environment, Tidewater is not the only one in hot water. Gulfmark, Hornbeck Offshore and others are also struggling. The market is still flooded with OSVs, with an estimated 340 new vessels still on the order books. Not all of these will enter the market. Some have been cancelled, and more cancellations are sure to come. Of the vessels on order, 57% (193) are PSVs, 42% (143) are anchor-handling tug/supply vessels and the balance are anchor-handling tugs, according to IHS Energy-Petro-

60% 83%

data’s Offshore Marine Monthly. These vessels are in addition to the 88 OSVs that have already been delivered this year. To accommodate the new vessels, the market will have to shed scores of older vessels. This is beginning to occur, but it isn’t happening quickly enough, said IHS Energy’s Alan Pirie. He believes that a significant percentage of the vessels built prior to 2000 “may have to be removed from the OSV sector in order for market conditions to rebalance in favor of vessel owners.” With the expense of these new generation vessels entering a tattered market, and scant demand for pre-2000 vessels to be eliminated from the global fleet, I expect to see more offshore service vessel company bankruptcies.

H i gh P e r f o r m a nc e A i r F i l t e r T e c h no l o gy . . . J us t T ru ne d a C o r n e r . INSTALL Walker’s New 90 Degree Air Filter for Caterpillar® 3512 & 3516 Marine Diesel Engines. Benefits Include • High Air Flow with Narrow Footprint. • Washable High Performance Air Filter. • Reduces engine width, ideal for multi-engine vessels. • Silencer Helps Reduce Turbo Noise. www.workboat.com • DECEMBER 2016 • WorkBoat

WB_AAG_LINO.indd 13

(818) 252-7788 sales@walkerairsep.com www.walkerairsep.com 13

11/8/16 11:27 AM

STOCK CHART

WorkBoat C om p os i te I n d e x Index treads water, operators tank

he WorkBoat Composite Index was down slightly in October losing three points, or just 0.22%. However, losers topped winners by a 20-9 margin, reversing last month’s count.

INDEX COMPARISONS Operators Suppliers Shipyards Workboat Composite PHLX Oil Service Index Dow Jones Industrials Standard & Poors 500

9/30/16 318.37 2634.69 2108.89 1650.37 163.61 18308.15 2168.27

SUPERIOR Z-DRIVE THRUSTERS FOR TOTAL CONTROL

Booth 3327

F SA

PE EO

R AT I O N

PRECISE MANEUVERING

FASTER RESULTS

FUEL EFFICIENCY

NAVIGATE THE WATER WITH CONFIDENCE

ZF – NETWORKING MECHANICAL AND ELECTRONIC SYSTEMS WITH SUPERIOR INTELLIGENCE

WB.ZFMARINECC.COM

For the complete up-to-date WorkBoat Stock Index, go to: www.workboat.com/ workboat-index.aspx

10/31/16 307.01 2616.67 2214.61 1646.77 150.79 18142.42 2126.15

NET CHANGE -11.36 -18.01 105.72 -3.60 -12.82 -165.73 -42.12

PERCENT CHANGE -3.57 -0.68 5.01 -0.22 -7.84 -0.91 -1.94

While the overall Index broke even, the Operators Index was down over 3.5%. Big percentage losers included OSV operators Hornbeck Offshore, Gulfmark Offshore and Tidewater. All three are being hit hard by the depressed energy sector. One or more of these companies may end up having to file for bankruptcy reorganization. Tidewater lost about 40% in October after the company announced that it would continue to work toward amending its debt arrangements, but there was a possibility that it would file for reorganization under Chapter 11 bankruptcy. Meanwhile, Gulfmark, which dipped over 30% in October, received an offer from competitor Seacor Holdings to merge. Seacor owns approximately $54 million of Gulfmark’s debt due 2022. In its letter to Gulfmark’s board of directors, Seacor said that Gulfmark’s recent public filings show that it “appears to face a liquidity shortfall. The last several quarters have eked out compliance with bank covenants by drawing on the bank line to repurchase public debt. Very little cash has been generated from operations. It appears to be only a matter of time before Gulfmark will be in covenant default.” Hornbeck lost almost 28% in October. In the company’s third quarter conference call with analysts in November, CEO Todd Hornbeck, said the soft market conditions persist and that he sees “no signs of a catalyst for recovery anytime soon and expect to see these conditions continue for the next several quarters, even if in the near-term, oil prices stabilize at the current level.” — David Krapf

WB_AAG_LINO.indd 14

www.workboat.com • DECEMBER 2016 • WorkBoat

11/8/16 11:28 AM

YOUR PROPULSION EXPERTS

WorkBoat Show

Visit us at booth 1627

TRUST THE QUALITY If you are looking for innovative hybrid and highly maneuverable propulsion systems, then SCHOTTEL is the one for you. www.schottel.com WB_FULLS.indd 15

SRP available with CP propeller 10/25/16 2:57 PM

In la n d In s id e r Transportation and oil, gas and coal

emember when low energy prices were supposed to be short term because production was expected to decline in response to low prices and financial losses? We don’t hear much of that talk anymore. I bought gasoline locally for $1.99 a gallon, the cheapest price seen here in almost two years. Across the energy spectrum low prices are now the new norm. Coal, oil and natural gas production have remained relatively stable as these industries are littered with bankruptcies. The energy pundits who track supply-demand statistics and prices expected that bankruptcies would result in reduced production as companies ceased operations. In fact the opposite has occurred, with some companies

In s u ra n c e W a tc h

Do you need professional help for your insurance?

hen you want to hire a captain to operate your vessel do you just go with anybody with a license? Of course not. You look for the most professional captain with the best record and the most experience you can find. How about choosing an accountant? You look into his or her qualifications, check with business associates, and you might even call your lawyer for a recommendation. How about finding a lawyer? Do you simply go to the phone book and call the one with the biggest ad? So, how should you choose an insurance agent? We all see TV ads about saving you money on insurance. We also see print ads that say so-and-so

WB_AAG_LINO.indd 16

increasing production to offset financial losses from low energy prices. Consequently, the transport sectors are enjoying sustained lower energy prices. However, there are some obvious negatives for energy transport providers. Clearly the coal boom that occurred in the last decade is over. Railroads that had large coal traffic bases have seen significant sustained losses in traffic. In some cases, this is irrevocable. The barge sector has also been similarly affected. The domestic crude oil production boom has peaked. In 2013, tank barge rates were nearly double current rates, and this assumed that barges were even available for charter. Today there is a glut of tank barges and railroad tank cars for the movement of liquids. The abundance of equipment will exert downward pressure on freight rates for a long time. Energy prices and related transport rates to move it will remain depressed.

Some say the low price bubble could persist through the rest of this decade, resulting in a long period of low prices. A lot of the attention that was previously focused on energy efficiency By Kevin Horn will likely be placed on hold. Barge lines and railroads will continue to move energy, but less of it will be coal. Companies with a heavy dependence on coal will have to reinvent themselves from an operations and efficiency perspective. Many railroads and barge lines are currently trying to do this. The jury is still out.

agency can write all types of insurance from home and motorcycle to insuring your pets. Do you choose one of these? Maybe, but I suggest you consider other sources of information before determining the right agent to handle your complicated business and vessel insurance. Let’s talk money. If you want to save insurance premium dollars there are all kinds of insurance agents who can offer these savings. But there’s so much more to it than that. In my career, I got many clients back when they found out that what they saved in premiums was more than lost on an uncovered insurance claim. In one such case, I lost a client to premium savings until he found out that his vessel was insured on a “total loss only” basis. That meant that the only way he could collect on his hull coverage was if his vessel was declared a total loss. Remember, most claims are for partial losses to the vessel. So how do you find a professional insurance agent who can actually help

when you have a covered loss? I’m a huge fan of going to whatever industry association you belong to and asking if they have an insurance plan or an endorsed insurance agency. Usually that By Gene agency has earned McKeever that right because they actually know the industry. It has specialists who can pinpoint the right insurance company and coverage that might suit you best regardless of cost, but usually they also save you premium dollars.

Kevin Horn is a senior manager with GEC Inc., Delaplane, Va. He can be contacted at khorn@gecinc.com.

Gene McKeever is a marine insurance consultant and instructor. He was a marine insurance agent for 39 years. He can be reached at gene@mckeeverconsulting.net or 207-596-1738.

www.workboat.com • DECEMBER 2016 • WorkBoat

11/7/16 10:07 PM

Booth 3301

Innovation that shapes tomorrow Marine Jet Power is a leading supplier of waterjet propulsion for small craft and larger ships â&#x20AC;&#x201C; the first in duplex steel mixed flow jets.

Meet us at International WorkBoat Show.

marinejetpower.com

WB_FULLS.indd 17

10/25/16 2:57 PM

L e g a l T a lk Dockowner is liable for unsafe berth

fter more than a decade of litigation, a federal court in Pennsylvania, with guidance from the U.S. Court of Appeals for the Third Circuit, has provided some closure in the envi-

ronmental disaster that resulted from a 2004 oil spill in the Delaware River. The legal drama began to unfold almost immediately after the hull of the tanker Athos I was ripped open by a partially buried and unchartered anchor as the ship tried to berth at Citgo’s asphalt refining dock near Philadelphia. An estimated 264,000 gals. of heavy crude poured into the river and soiled some 280 miles of

SEAWORTH DROP-IN AIR CONDITIONER Fast, Easy Installation - No Plumbing or Ductwork

COMPRESSOR STABILIZATION FOR PROTECTION IN HEAVY SEAS

Designed and built for long life and dependable performance in the harsh marine environment. - Condenser and evaporator coated with ElectroFin® E-coat process for superior corrosion and UV resistance - Built-in vibration isolation for key components - Sealed motor and bearings - Stainless-steel fan motor shaft - High efficiency, low-power consumption

Booth 3627

AER SUPPLY LTD. 2301 NASA PARKWAY SEABROOK, TX 77586 USA 800 767 7606 SALES@AERSUPPLY.COM AERSUPPLY.COM facebook.com/AERsupplyLtd @AERsupplyLtd For more information: http://bit.ly/aerproducts

WB_AAG_LINO.indd 18

shoreline. Damage to property and natural resources totaled about $300 million. In the ensuing litigation, the shipowner claimed that Citgo failed to provide a safe berth. The claim was By Daniel Hoerner based in part on an alleged breach of the “safe berth warranty” in Citgo’s voyage charter. According to court documents, the anchor lay in federal waters, directly in the ship’s immediate approach to the berth. Citgo argued that its safe berth obligations could not be imposed to guarantee the safe approach to the berth in waters that it did not control. An initial ruling of the district court agreed with Citgo, but it was reversed on appeal. The Third Circuit concluded that a terminal operator has an obligation of “due diligence” in its duty of care to a visiting ship and that duty extended to protect hazards that lay in the path of a ship’s immediate approach to the berth. Consequently, Citgo was ultimately found to be liable to the shipowner. In a July 2016 ruling by the district court, based on the holding of the Third Circuit, Citgo was ordered to pay the ship’s interests more than $55 million for the damages it incurred from the casualty, plus an additional $44 million to the U.S. government for pollution cleanup costs. The Athos I ruling reflects the enhanced liabilities faced by wharf and dock owners for the protection of vessels calling on their facilities and to the public at large. Daniel J. Hoerner is a maritime attorneywith Mouledoux, Bland, Legrand & Brackett LLC. He can be reached at 504595-3000 or dhoerner@mblb.com.

www.workboat.com • DECEMBER 2016 • WorkBoat

11/8/16 11:30 AM

The heart of a destroyer lies in every vessel we touch.

Booth 1311 Arm your boat with the same power used by the finest military ships. Commercial vessels may face different challenges than combat ships, but the best ones have equipment inside that’s built to last. That’s why many commercial boat builders have turned to PEPCO – the foremost power distribution company for military boats and vehicles – to power their ships as well. Our equipment

PLAINVILLE ELECTRICAL PRODUCTS COMPANY

can withstand the shock of collisions, gunfire, and underwater explosions during wartime. Can yours?

www.PoweredByPepco.com

* U.S. Navy photo used in illustration. Use of released U.S. Navy imagery does not constitute product or organizational endorsement of any kind by the U.S. Navy.

WB_FULLS.indd 19

10/25/16 2:57 PM

DECE MBE

2016

NEWS LOG NEWS BITTS ABS TO PRO VIDE AWO RCP AUDITS F OR SUBCH AP TER M

Heiltsu k F irst Nation/ April Bencz e

The

tug

Nathan E. Stewart partialy

s unk

on a ref

i n Br i ti s h C ol um

bi a.

Call for new safety rules after Canadian diesel spill

anadian government officials are under pressure to come up with new shipping policies and environmental protections after the Oct. 13 grounding of the Kirby Offshore Marine tug Nathan E. Stewart, which spilled diesel fuel near Bella Bella, British Columbia. The 95.3'×32'×13.7', 3,400-hp tug was paired with the empty DBL 55 barge when the tow went hard aground on a reef at the entrance to Seaforth Channel near Athlone Island. For more than two weeks, responders led by the Canadian coast guard struggled to contain the spill and salvage the tug, frustrated by weather and the area’s powerful tides and currents. Within five days, the tug’s tanks had been transferred to a lightering vessel, but it was unclear how much fuel and other fluids were spilled. Houstonbased Kirby said the tug had been loaded with 59,924 gals. of diesel fuel when it ran aground, and that 6,554 gals. had been pumped from the tug into a tank on the barge before pumps failed due to water in the engine room. The tug also carried 639 gals. lube oil,

WB_Newslog_LINO.indd 20

550 gals. hydraulic oil, 550 gals. gear oil, and 969 gals. dirty bilge water. The accident brought renewed calls to restrict tanker shipping through the Inside Passage to protect the Great Bear Rainforest. Heiltsuk First Nation officials said the spill threatens dozens of species, including manila clams, a fishery that had been due to open in early November. BC Minister of Transport Marc Garneau praised the Heiltsuk for their initial response efforts and listing the “safety and protection of the public and the environment” as the government’s first priority. Garneau also hinted at possible changes to come to marine safety policies. “The Nathan E. Stewart incident underlines the need for changes in the way we respond to marine pollution incidents, and that is why I am currently working on a coastal strategy to improve marine safety in a meaningful way,” he said. The Transportation Safety Board of Canada launched an investigation of

he American Waterways Operators has granted approval to the Am erican Bur eau of Shi pi ng to carry out audits of AWO’s Responsible Carrier Program (RCP) — a big step toward implementing the Coast Guard’s new Subchapter M inspection regime for towboats, tugs and barges. Subchapter M regulations that began taking effect July 20, establish vessel safety and inspection requirements. To obtain the newly required certific tes of inspection (COIs), vessel owners and operators can opt for annual Coast Guard inspections, or adopt a Towing Safety Management System (TSMS). The RCP has origins in the 1990s, as the Coast Guard and AWO studied towing accidents and looked for ways the industry could improve safety and environmental safeguards. As the final rules for Subchapter M emerged this year, AWO submitted its RCP program for Coast Guard acceptance as a TSMS early in the process. Final approval is anticipated this fall. — Kirk

Moore

the incident. Kirby was remorseful and thanked responders. “We deeply regret the incident that occurred with the Nathan E. Stewart tug. We understand that the incident has caused significant concern for the Heiltsuk Nation and all the people of British Columbia,” Jim Guidry, Kirby’s executive vice president of vessel operations, said in a statement thanking responders. “But most importantly, we want to express our gratitude to the Heiltsuk Nation for their response efforts, local knowledge and generosity. Their contributions have been greatly appreciated.” — Ashley Herriman

www.workboat.com • DECEMBER 2016 • WorkBoat

11/2/16 3:50 PM

uilt at a cost of $80 million in 2010, the Susitna, a variable-draft landing-craft prototype, has finally been sold for $1.75 million. The buyer is the Philippine Red Cross. At press time, the boat was en route to the Philippines by barge. Once there, modifications will prepare the 195'×60' twin-hull, four-waterjet vessel for disaster relief and emergency services. “There are over 7,000 islands in the Philippines, many of which have no facilities whatsoever,” said Lew Madden, a retired Navy captain who has shepherded the Susitna project from its inception at Lockheed in the early 2000s. Madden also represented the Susitna’s owner, the Matanuska-Susitna Borough in Alaska, during the sale. “The buyers should use it pretty much

Alaska Ship &

Dry dock ( Vig or Alaska)

Alaska prototype landing craft sold for $1.75 million

T he one- of - a- ik dn l andi gn cr af t Susitna w i l l s er v e in di s as ter r el i ef f or the P hi l i pi en Red C r os s .

as it was designed, except for the icebreaking, of course.” The Mat-Su Borough had originally intended to use the boat as a ferry across Cook Inlet, northeast of Anchorage, even though the boat was designed and built as a landing craft. It was largely financed by the Office of Naval Research, which saw it as an expeditionary concept to land troops and equipment on unimproved beaches.

But the borough never built the necessary infrastructure to operate the ferry and has been trying to sell the boat since 2012. The vessel was built at Alaska Ship & Drydock (now Vigor Alaska) in Ketchikan, Alaska, and delivered in 2010. The sale was complicated by engine damage sustained during a storm a couple years ago while tied up near Ketchikan. Rainwater flooded all four

1210 Ellis Street • Cincinnati, OH 45223-1843 Phone: 800-860-2872 • Fax: 513-541-3065

Email: Sales@aurand.net • Web: www.aurand.net www.workboat.com • DECEMBER 2016 • WorkBoat

WB_Newslog_LINO.indd 21

11/2/16 3:50 PM

Downstreaming maneuvers cited in NTSB report

NEWS BITTS CORP S E YES $2. 7 BI LLI ON F OR EAST COAST BE ACH WORK

National Transportation Safety Board report on the May 30, 2015, capsizing of the fleeting towboat Miss Natalie blamed the Lower Mississippi’s high water that spring and the captain’s decision to downstream with the current toward an approaching barge tow. The NTSB reiterated cautions issued in a joint Coast Guard-American Waterways Operators 1999 study of downstreaming maneuvers and their potential hazards. In most circumstances, moving with the current toward a barge is practical and safe, that analysis found. “However, when casualties do occur, the risk to vessel crew is very high and the options for escape are limited,” especially for smaller towboats of lesser horsepower operating in high-water conditions, the 1999 report warned. The 59'×28'6"×7'7", 1,600-hp Miss Natalie, operated by Western Rivers Boat Management, was pinned against the bow of a coal barge it was to move, rolled over and sank. Three crewmembers scrambled onto the tow, while the captain in a life vest was washed out of the pilothouse. A fourth crewman drowned in the vessel. The incident occurred near Convent, La., about 15 miles upriver from New Orleans. NTSB investigators cited an esti-

fter Hurricane Sandy in 201, 26 million cu. yds. and $420 million went into rebuilding beaches from Rho de Isla nd to Virginia. The Corps of Engine ers could spend much more — if it can get the money. “W e’ re going to need a lot of sand, and we’ re going to need a lot of money,” Lynn Bo camaz o, chief of the Corps’ Hurricane Sandy Relief Br anch, said at the American Shore & Be ach Preservation Association national conference in Long Br anch, N.J., in Oct ober. Bocamaz o outlined plans for up to 40 beach replenishment projects over the next 20 years. Those will need an estimated 140 million cu. yds. of sand, delivered from the sea floor to shore by contractors like Grea t Lakes Dredge & Dock Company at costs between $2. 1 billion and $2. 8 billion, plus $895 million for mobiliz ation costs. But Bo camaz o stressed that the Corps needs to prioritiz e those projects. With sea level along the most populous parts of the East Coast predicted to rise one to two feet by the 2050s, there will be a lot of competition for federal dollars.

engines, unbeknownst by the engineer who turned them over during a monthly warmup. All four MTU 12V4000 engines had to be rebuilt at a cost of at least $1 million. “The insurance will probably cover the cost, but the borough is still arguing with them,” said Madden. The boat will be modified to carry more weight and its passenger areas will be converted to berthing, office and clinic space. “They’re getting a heck of a bargain and I’m happy to see it find a home,” Madden said. “It would have been a shame to never see it go to work.” The Susitna was selected by WorkBoat as one of its Significant Boats of 2010. — Bruce Buls

WB_Newslog_LINO.indd 22

U.S. Coast G uard

— K. Moore

The

mated river current near mile marker 162 that may have been as high as 5.5 knots, and noted the barge tow was still moving forward at over 2 knots. As the Miss Natalie approached the barge to make contact, the towboat’s stern swung suddenly to port. The captain was unable to regain control, and the towboat was pinned and rolled under by the barge rakes, the report said. The probable cause of the sinking was “the captain’s decision to downstream on a linehaul tow given the prevailing conditions,” combined with the continued forward motion of the tow, the report concluded. — K. Moore

Marad grants boost container-on-barge shuttle services

ix grants totaling $4.85 million from the Maritime Administration will expand container-on-barge services and study the development of a new commuter ferry service. The Marad awards announced in October go to six projects in 17 states and the District of Columbia. One $1.63 million grant will purchase infrastructure and a crane operator training center for the New York City cross-harbor container and trailer barge service between the Red Hook Container Terminal in Brooklyn and Newark, N.J. The Red Hook connection was

tow boat L ow er

Miss Natalie w sa r ia s ed f r om the M i s s i s s i pi R i v er i n O tc ober 2 0 1 5 .

www.workboat.com • DECEMBER 2016 • WorkBoat

11/2/16 5:16 PM

Booth 332

Maritime risks are vast. So is our team to see you through them. Whether you provide marine services or transport goods, people or cargo, you face countless property and liability risks. When you work with Travelers Ocean Marine, you’ll be working with a team that has deep knowledge of the maritime industry – backed by the financial strength of the #1 commercial property writer in the U.S.* We’re dedicated to helping you understand how to protect against the unknown. But if the unfortunate should occur, you’ll be ready with the power of Travelers. That includes a 12,000-person claim organization – with a catastrophe response team, ready to be deployed at a moment’s notice – and the financial strength to handle major claims. You can rest easy knowing you’re not going it alone. *Reported by SNL Financial

travelers.com © 2015 The Travelers Indemnity Company. All rights reserved. Travelers and the Travelers Umbrella logo are registered trademarks of The Travelers Indemnity Company in the U.S. and other countries. 15-OM-1837 Rev. 8-15

15-OM-1837_Workboat WB_FULLS.indd 23 Magazine_150821_jor.indd 1

8/21/15 10/25/16 12:53 2:57 PM PM

Kirk Moore

launched in September and is touted by the Port Authority of New York and New Jersey as one way to cut down on traffic congestion and truck emissions, a big issue for community and environmental groups. Another grant will help expand existing container-on-barge services along the Mississippi River and in Virginia, and investigating the feasibility of extending them all the way from New Orleans to St. Louis, Minneapolis and

The tugboat the Ki l l V an Kul

Marion Moran on the hi p of a cr os s - har ob r cont l near St at en I s l and, N . Y . , i n Sept me ber .

Booth 3427

A K E

T H E

CONNECTION

The global leader in flexible couplings for marine applications. Trust the innovator-trust CENTA. O v e r 2 0 u n iq u e d e s ig n s O v e r 1 6 m illio n s o ld

CENTAFLEX for close coupled gear drives

Torsional Vibration experts

Carbon Fiber Driveshaft leaders

CENTALINK for intermediate drive shafts

CENTAX-SEC for remote mounted gear drives

CENTA P O W E R L E A D I N G

T R A N S M I S S I O N B Y I N N O V A T I O N

2 5 7 0 B e v e r ly D r. # 1 2 8 , A u r o r a , I L 6 0 5 0 2

T6 3 0 .2 3 6 .3 5 0 0

C a t a l o g d o w n l o a d s a t www.centa.info E m a i l i n q u i r i e s t o wb@centacorp.com

ai ner

bar

Chicago. The projects include: • Baton Rouge, La., to New Orleans shuttle service, $1.75 million. New service to collect empty containers in Memphis, Tenn., and transport them to Baton Rouge to meet customer demand for chemical industry exports out of New Orleans. • Illinois container-on-barge shuttle project, $713,000. An 18-month demonstration project to provide shuttle service for agricultural customers moving containerized exports between southern and northern Illinois to rail connections. The service will operate on the Illinois and Mississippi rivers between Channahon and Granite City, Ill. • Virginia’s James River container expansion, $476,748. Expand the 64 Express barge service between Hampton Roads and Richmond to include refrigerated and frozen product containers. • Containerized shipping on the Mississippi River, $96,000. St. Louis Port Authority, Inland Rivers Ports & Terminals Inc. and others are supporting planning efforts for developing containerized shipping between New Orleans, Minneapolis and Chicago. • Potomoc River commuter ferry, $173,361. The Northern Virginia Regional Commission is studying the development of a new commuter ferry service on the Potomac River between Virginia and Washington, D.C. Ferry service could reduce traffic congestion on the I-495 Beltway and other highways linking the northern Virginia suburbs and the District of Columbia. — K. Moore

WB_Newslog_LINO.indd 24

www.workboat.com • DECEMBER 2016 • WorkBoat

11/2/16 3:51 PM

BECAUSE PERFORMANCE MATTERS

WWW.NAUTICAN.COM

Booth 3315

AN INVESTMENT IN YOUR FLEET THAT PAYS FOR ITSELF Independently tested, high-performance hydrodynamic solutions help maximize power while reducing fuel consumption.

Join Nautican at the International WorkBoat Show, Nov. 30â&#x20AC;&#x201C;Dec. 2, 2016, Booth 3315

WB_FULLS.indd 25

10/25/16 2:58 PM

CONSTRUCTION ACTIVITY AT WORKBOAT YARDS

On Th eWays

ON THE WAYS

N ew

Z-driv

e tug

for E. N . Bis s o wil

work

the Mis

s i s s i pi

R i v er .

n October, New Orleans-based E.N. Bisso & Son Inc. christened its new 5,362-hp, 80'×38'×15' azimuth stern drive tug Gladys B at Signet Shipbuilding & Repair, Pascagoula, Miss. Designed by Robert Allan Ltd., Vancouver, British Columbia, the new Z-drive tug, which will work in the Mississippi River, is powered by two MTU 16V4000 M64, Tier 3 diesels, putting out 2,681-hp each. The engines connect to Rolls-Royce US205, fixed pitch Z-drives with 94.49" 4-bladed nibral propellers in Kort nozzles. The propulsion package gives the tug a bollard pull of 60 MT ahead and 56 MT astern. “We call her the Maserati of the river,” J. Barry Snyder, president, Signet Maritime Corp., said during his remarks at a christening ceremony in Pascagoula, Miss. “It’s a credit to the fine shipbuilders at Signet Shipbuilding.” “We bought this yard in 2010 and have made the place a first-class facility … building boats that when you operate it, everything is where you want it to be so you can have a safe operation,” Joe Dahl, Signet vice president, told those in attendance. “I wished I could build a boat for you,” he said to the Bisso family seated in the front row. “Today, my dream has come true.” The boat started out as a tug for Signet’s fleet, but E.N. 26

WB_OTW_LINO.indd 26

Ken H ocke

E.N. Bisso Z-drive tug christened at Signet

Bisso and Signet had been in discussions about building a new tug, so Bisso decided to buy it before the Tier 4 engine regulations go into effect in 2017. “I liked the tug and wanted to get it in before Tier 4,” William H. McDonald, E.N. Bisso’s president, said after the ceremony. “I can’t wait to get it on the river, probably in early December. I wish I had two more of them.” Capacities include 28,649 gals. of fuel and 8,756 gals. water. On deck is a Markey DEPGF-42S, 50-hp electric bow winch. There are accommodations for six crewmembers in three staterooms. The Gladys B is classed ABS Maltese Cross A1, Maltese Cross AMS, FiFi Capable, Escort. — Ken Hocke

Fir st of 1 0 new

w ater taxis for B altimore

aritime Applied Physics Corp. (MAPC), Baltimore, recently delivered the first of what will be a new fleet of 10 water taxis for the city. The 55'×12'9"×3'1" Key’s Anthem is a 49-passenger vessel that pays homage to the past while embracing the future. Baltimore’s gritty waterfront has been undergoing a slow transformation since the 1980s. Now, sportswear maven Kevin Plank of Under Armour has added the deep pockets of his Sagamore Ventures to the effort. www.workboat.com • DECEMBER 2016 • WorkBoat

11/1/16 9:31 AM

Kathy Berg ren Sm ith

Sagamore acquired Harbor Boating, operators of the city’s current water taxi fleet, in August and promptly began an ambitious newbuild program. The first boat, Key’s Anthem, debuted during Fleet Week in October and marks a departure from the simple pontoon boats that comprise the current fleet. Five new boats will be in the water by the end of next year. MAPC is a 30-year-old employeeowned research and development company best known for its advanced hulls, unmanned marine and land vehicles, and motion compensated land, air, and marine vehicle launch and recovery systems. The water taxi project is its first commercial venture. Nathan Baugher, program manager for the water taxis, recalled the original meetings with Kevin Plank where he outlined his vision for the boats. “He told me to go and spend time at the Chesapeake Bay Maritime Museum and study the hull forms of the tradi-

N ew

4 9 - pas

s engr

w at er

taxi

w i l l r un

1 8 hour s a day

tional deadrise bay-built boats,” said Baugher, who has a degree in sculpture. His team set about designing the iconic boat Plank requested. MAPC created an aluminum water taxi with a raised wheelhouse and round stern referencing the “Hooper’s Island draketail,” a boat used by Maryland watermen for crabbing and harvesting oysters. Unlike the pontoon boats, the new boats will load from the midship with wheelchair ramps. There is stowage for eight bicycles onboard. Seating is ar-

ranged on a continuous bench along the hull, including along the curved stern. The flooring is Plastdek, a man-made, repairable material made to mimic a wooden deck. The new boats will evolve as the 10-boat order progresses, according to Baugher. Key’s Anthem is powered by twin Beta Marine diesel engines but future boats will be diesel-electric hybrids. The Beta engines are rated at just 38-hp each. Baugher said this would provide a fuel-efficient propulVisit Us at the International WorkBoat Show, Booth #3335

Design Solutions that Deliver Results

EXPERIENCED

Jensen is pleased to introduce our newest designs for the Inland River Towboat Industry. As one of the world’s leading naval architecture and marine engineering firms, we provide award-winning designs coupled with a full range of engineering and construction management services that allow customers to leverage our expertise throughout the lifecycle of their project.

ACCOMPLISHED

To bring Jensen on board for your next project,

Beautiful Designs. Efficient to Build.

TRUSTED www.workboat.com • DECEMBER 2016 • WorkBoat

WB_OTW_LINO.indd 27

Naval Architects & Marine Engineers

Extraordinary to Operate.

11/1/16 9:31 AM

On Th eWays sion system. “The area of operations for the water taxis is within a 6-knots at all times speed zone, and the vessels must be able to run 18 hours a day,” said Baugher. “The lower horsepower engines will save a lot of fuel and still make 8.5 knots.” ZF 25A 2.71:1 reduction gears turn 18"×12" bronze 4-bladed props. There is no generator onboard. Ship’s service power is supplied by two Balmer 24 VDC alternators. The raised pilothouse features two captain’s chairs, one adjustable for young riders to climb into so they can get a look at the helm. Steering is provided by SeaStar Optimus electronic power steering. Navigational equipment is a Garmin GPSMAP 721. When it came to the exterior look of the boat, Plank wanted something that would make a statement. So the MAPC team came up with a black hull with a boot stripe based on the Maryland flag. The topcoat is an engineered coating

developed for the aeronautical industry. Baugher said it will be more maintainable than traditional gel coat and will not fade. The windows are designed to slide open and stow in the headlong for open-air travel. Sagamore is planning to expand the reach of the water taxi to add commuter service into the city. With this in mind, the boats will have onboard Wi-Fi and GPS tracking. Sagamore is working in partnership with Uber to add on-demand water taxi service in the future. — Kathy Bergren Smith

Miller M arine delivers cargo ferry for New York

hen Labor Day has passed and the summer visitors are gone, new work starts on New York’s Fire Island. Fall and winter are prime time for building contractors, and the new 78'×24'×4' ferry Turtle built by Miller Marine Inc., for Fire Island Ferries

will be hauling equipment and material to them across Great South Bay. “It’s a deck boat with an elevated pilothouse, nothing fancy, but it’s robust,” said Blake Miller, a vice president at the family-owned shipyard in Deltaville, Va. “Our customer, Fire Island Ferries, have a number of different ferries by different builders. This boat is a supply boat.” Coast Guard certified for Subchapter T operation, the 82-dwt ferry can carry eight passengers. But it is built primarily for cargo and containers, with a 78'×20' deck, a bow ramp, and 12-ton National deck crane. Based in Bay Shore, N.Y., Fire Island Ferries has a similar vessel of about 65' in service. Miller checked out their operations and worked with the ferry operator’s co-owner Michael Mooney and general manager Dave Anderson to come up with a new design. “He (Mooney) wanted shallow draft, but he wanted big power in relation

Booth 4171 The Answer for engineered equipment in marine applications

• WINDLASSES & CAPSTANS

RUGGED & RESPONSIVE MARINE CONTROLS AVENTICS electronic and pneumatic controls for reverse gear, controllable pitch and Voith Schneider propeller applications feature robust construction and precise control.

Booth 3435

• MOORING & ANCHOR WINCHES • HAWSER, ESCORT & TOWING WINCHES

• HOSE REEL & CABLE LAYING SYSTEMS

Advantages Proven electronic & pneumatic components Durable construction CAN-bus capable electronic systems

AVENTICS Corporation Lexington, KY www.aventics.us info.us@aventics.com

• SPUD WINCHES • SWING & LADDER WINCHES Ph: (519) 537-6262 Email: sales@tewinch.com www.timberlandequipment.com

avent056P-QPV-wbA12.indd 1

WB_OTW_LINO.indd 28

www.workboat.com • DECEMBER 2016 • WorkBoat

11/1/16 9:33 AM

Booth 3081

PAC T 12 0 0 I M

r ie s . K C I hy m il it a w W ’s t a S h is sion. T or t ing a THE BRUN r d in a r y m a nd s upp

B R I N Gops there’s no such thuinnsgwaics ka.nWo e’ve been inbueilvdeinryg conflict sinIcmeptahcet

l Br sted 20 0 In s pec ia yea r s, te li ke t he 1 br ing t he s 0 it . ld B 5 r I r o H w fo R e ic k oats t hey g ive w b s s n a n u e d r v o ac r os s t h B o o r g -p ad aptable at ing a s of bat t le m is sion ta ke a be fu ll li ne ’s d y n a a d h o s T om . fla Wa r. n s w ic k .c u a mu z z le r s B V iet n a m a e t h s T fa eig ht, t Br ing In fla ta ble a r e lig ht w le pr oud l ine a ig id Hu ll o R h T w C A e P h IM See t le Hu ll Un s in k a b R LE A H W N ll B O S T O in u m Hu m lu A Y R S E NT

WB_FULLS.indd 29

10/25/16 2:58 PM

to draft,” Miller said. “We did all the design in-house, and we partnered up with Donald L. Blount and Associates,” the Chesapeake, Va., engineering firm, he said. DLBA is a wholly owned subsidiary of Gibbs & Cox Inc. Designed to ABS and Coast Guard standards, Miller Marine came up with the following package: twin Cummins QSL9 engines putting out a total 580 hp at 1,800 rpm, and Twin Disc MGX5114 HD marine gears with 2.5:1 reduction ratios. Two 36"×30", 4-bladed ZF propellers are recessed in tunnels to keep the draft at 4'. The combination yields a service speed of 9 knots — and nimble maneuverability, which sometimes can be difficult with recessed propellers. “It can turn in its own length. The boat handles phenomenally for a tunnel boat,” Miller said. There’s tankage for 1,400 gals. of fuel. In the pilothouse are controls by Glendinning Products, Conway,

Dave Anderson

On Th eWays

C ar go f er r y f or L ong

I s l and,

N .Y .

S.C., and the steering system by Miller Marine. Electronics include Furuno radar, Garmin GPS and Raymarine VHF radios. Ship’s service power comes from an Onan 9-kW generator. The Turtle is equipped throughout with LED lighting that draws just 20 amps. At the end of October, Fire Island Ferries was waiting for good weather to bring the Turtle north to New York. — Kirk Moore

Booth 1234

UNCOMPROMISED

Bay Welding complet es passeng er vessel for Alaska

utfitting Bay Welding Services’ latest passenger boat wasn’t that involved: a pair of Suzuki 250-hp outboards, some basic electronics, seats for 20 passengers and two crew, and lighting. But the 30'×12' aluminum monohull’s mission meant that Bay Welding couldn’t build a standard offthe-shelf design and expect it to work.

Often Imitated, Never Duplicated EXPERIENCE … 70 years evidenced in over 1700 vessels designed and built.

CONTROL

HT Series

Low Submergence Requirement Small Hull Penetrations Auxiliary Propulsion/ “Take Home” Capability

THE VERSATILITY … As exemplified in Breaux's Bay Craft, Inc. constructed crew boats, passenger vessels, excursion vessels, catamaran, pilot vessels, and motoryachts in use around the world. AND QUALITY … The fairest of hulls, CUSTOM BUILT to meet any type of service required. Contact Roy Breaux, Jr. or Hub Allums

Effective Thrust in Currents JT Series

Waterjet Bow/Stern Thrusters Up to 2,200HP

Proudly Made in the USA! INCORPORATED

Founded in 1946 by Roy Breaux, Sr.

WB_OTW_LINO.indd 30

(337) 229-4246 P.O. Box 370, Loreauville, LA 70552

www.workboat.com • DECEMBER 2016 • WorkBoat

11/1/16 9:36 AM

Booth 2301

Auxiliary power that’s ready when you are Lift cargo, pump materials, produce thrust, generate prime or emergency power — whatever the job, John Deere PowerTech™ auxiliary drive engines are ready to take it on. These proven industrial diesel engines meet U.S. EPA Marine Tier 3* emissions regulations for use on major waterways. Fitting your application has never been easier with displacements from 4.5L to 13.5L, power ratings from 74 to 448 kW (99 to 600 hp), and a variety of options and accessories. Plus, with John Deere, you never have far to go to ﬁnd expert assistance and advice. Visit JohnDeere.com/dealer to ﬁnd the service dealer nearest you. *Product offerings vary by country.

WB_FULLS.indd 31 16179_Marine-AUXILIARY_Ad_8-125x10-875_full_WB.indd 1

JohnDeere.com/aux

10/25/16 10/13/16 2:58 8:58 PM AM

On Th eWays

BOATBUILDING BITTS The Shearer G rou p Inc.

burgh (N.Y.) Fire Department. The new fireboat is a landing craft-style hull configuration that features a 63" hydraulically operated bow door. Powered by twin Honda 250-hp outboard N ew tank bar ge f r om motors, the fireboat also has a C& C M ar i ne. 2,000-gpm Darley fire pump, foam capabilities, and built-in hose storage compartments. — K. Hocke The Shearer Group Inc. (TSGI), Seabrook, Texas, has designed a 200'×35'×12' double-skin tank barge for C&C Marine and Repair LLC, N ew tug f or S am S m it Belle Chasse, La. The barge is T ow . e g a the first of a series of doublehulled tank barges that will be built by C&C Marine. — K. Hocke

ABD Boats, North Vancouver, British Columbia, launched the 71.14'×35'×12.99' Z-drive

Sm it Towag e

ulf Island Shipyards, Houma, La., recently delivered the last of three new 180'×48'×11'6" linehaul towboats for Marquette Transportation Co., Paducah, Ky. Designed by Gulf Island, CT Marine, Edgecomb, Maine, and Ships Architects Inc., Daphne, Ala., the Chad Pregracke’s propulsion package features twin EMD 20-710 G7C Tier 3 diesel engines capable of producing over 10,000 hp at 900 rpm. — K. Hocke In October, Lind Marine, a Petaluma, Calif., dredging contractor which provides tug and barge services in the San Francisco Bay area, purchased aluminum boatbuilder Moose Boats. Lind Marine currently operates a five-acre shipyard including a 430' drydock and 1,600' of linear pier on Mare Island in L inehaul tow boat f r om Gul f Vallejo, Calif. Is land Sh i py ar ds . Lake Assault Boats, Superior, Wis., recently delivered a 28'×9'6" fireboat to the New-

Saam

Gulf Island Shipy ards

Booth 2132

ADVANCING SAFETY DRIVEN BY INNOVATION www.eagle.org © Sludge G

Designed for:

Heavy Duty Naval Architecture Marine Engineering Salvage Engineering Marine Surveys

JMS-Designed.

Stevedoring barge 300’ x 72’ · 6,000 psf deck Built by Conrad Shipyard for the Rhode Island Commerce Corp. and Port of Providence

WB_OTW_LINO.indd 32

www.JMSnet.com 860.536.0009 Barges, Dry Docks, & Work Boat Design www.workboat.com • DECEMBER 2016 • WorkBoat

11/1/16 9:34 AM

Booth 3149

THE VIGOR NEW BUILD TEAM ALUMINUM, STEEL, SMALL, MEDIUM OR LARGE, WE DELIVER QUALITY.

Aluminum, steel, small, medium or large the Kvichak/Vigor team is VIGOR.NET

WB_FULLS.indd 33 37-4529 FB and Pilot 8.71x11.46_f.indd 1

MARINESALES@VIGOR.NET

ready to build it for you.

10/25/16 2:58 PM 10/13/16 11:16 AM

tug SST Salishon on Oct. 19 for Saam Smit Towage Canada. Main propulsion comes from twin MTU 16V4000M61 diesels, producing 2,680 hp each. The mains connect to Rolls-Royce US20 FP Z-drives, producing a bollard pull of 65 MT. — K. Hocke In October, Marquette Transportation Co., Paducah, Ky., took delivery of the 2,000-hp Z-drive towboat St. Simon from Master Marine Inc., Bayou La Batre, Ala. The 78'×34'×11' St. Simon was designed by Entech Designs LLC, Kenner, La., for Marquette’s river division. — K. Hocke

T H E RI G H T C H OI C E W H EN Y OU NEED T O

H IC A P C A P S T A N • Class-defining 80,000 pounds of bollard pull • High-tensile alloy shaft • Oversized bearing surfaces

nabrico-marine.com 615.442.1300

Booth 621

NABRICO

15-NAB-1780 Workboat Mag Oct HiCap M lf.indd 1

7/20/15

Booth 3370

Interceptor 30

FEATURES • Low profile for on trailer storage • Fast Launch trailerability • S OLAS Rescue requirements

• Port & STBD dive doors inches above w/line • 5 KW genset w/HVAC • Fast attack response 45-50 MPH

• Can be fitted with fire pump • Foam or air collar options • Offshore Capable • 10 year hull warranty

Designers and builders of Quality Custom Aluminum Workboats www.metalcraftmarine.com 1-800-410-8464 34

WB_OTW_LINO.indd 34

Bay Welding Services

On Th eWays

N ew

pi cks

A l as ak pas s engr up cl i ent s af ter

v es s el r i v re r fa t tr i ps .

The Homer, Alaska, boatyard built the Alaska Nellie for Alaska Wildland Adventures, operating out of Seward and Cooper Landing, about an hour north of Seward. “It’s kind of a unique situation,” said Eric Engebretsen, Bay Welding Services general manager. Bay Welding did the concept design and Coastwise Corp. in Anchorage did the engineering and stability work. One of the vacation packages offered by Alaska Wildland Adventures is a raft trip from Cooper Landing down the Kenai River to Skilak Lake. There the Alaska Nellie meets rafters at the mouth of the Kenai River where there’s a fair amount of current. The boat has to hold in place with its bow into the current, while a raft — loaded with up 9:08 AM to 10 people — ties off at the stern, allowing passengers to board over a loading platform. The boat then takes two raft-loads of passengers across Skilak Lake, which can get rough, to a lodge about six miles across the lake. There they disembark over a landing craft-style bow ramp. Passengers are also transported from the lodge to a load-launch ramp. It’s about 20 miles round-trip. “It needed to be able to travel at good speed to make multiple trips in a day,” said Engebretsen. With 22 passengers, he said the boat easily cruises at 22 knots. The lake can also get quite shallow as you approach the shore. So shallow draft was another design consideration. While the hull has an operational draft of 2', jack plates on the outboards allow it to operate in 16" of water. The Alaska Nellie was completed at the end of October and will go into service in May 2017. — Michael Crowley

www.workboat.com • DECEMBER 2016 • WorkBoat

11/1/16 9:36 AM

Allemand Industries, Inc. Harvey, LA (504) 340-5581 Servicing: LA

Booth 2001

Florida Detroit Diesel Allison Fort Lauderdale, FL (954) 327-4440 Servicing: FL, Bahamas Helmutâ&#x20AC;&#x2122;s Marine San Rafael, CA (415) 453-1001 Servicing: AZ, CA, HI, NV, UT, Guam Johnson & Towers, Inc. Egg Harbor Township, NJ (609) 272-1415 Servicing: DE, MD, NJ, NY, Eastern PA, Bermuda Pacific Power Group Kent, WA (253) 854-0505 Servicing: AK, ID, OR, WA Power Products Wakefield, MA (781) 246-1811 Servicing: CT, MA, ME, NH, RI, VT Superior Diesel, Inc. North Charleston, SC (843) 553-8331 Servicing: GA, Eastern KY, NC, SC, Eastern TN Volvo Penta Canada Burnaby, BC (604) 872-7511 Servicing: Western Canada Wajax Power Systems Ste. Foy, QC (418) 651-5371 Servicing: Labrador, New Brunswick, Newfoundland, Nova Scotia, Prince Edward Island, Quebec, St. Pierre et Miquelon Western Branch Diesel Portsmouth, VA (757) 673-7000 Servicing: OH, Western PA, VA, WV

Reliable Port to Port Transport Why has Harley Marine Services selected Volvo Penta Power Center Pacific Power Group to provide cargo pump engines in five of its petroleum barges, including the newest vessels - Fight Fanconi Anemia and Fight ALS . Itâ&#x20AC;&#x2122;s because of an innovative engine design that offers water cooled exhaust manifolds and a marine fuel system for increased safety, excellent environmental benefits, low fuel consumption and an extensive service network.

Volvo Penta Power Centers Contact one of our Power Centers for applications guidance and engine quotes.

2016-12 Workboat.indd WB_FULLS.indd 35 1

10/20/2016 5:19:06 PMPM 10/25/16 2:58

TOP TEN

BPâ&#x20AC;&#x2122; s M ad

WB_CoverStory_LINO.indd 36

D og pl at f or m i n the G ul f of M exi

co.

Photo cou rtesy of BP

NEWS STORIES OF 2016

11/2/16 5:43 PM

HAS THE US GULF BOTTOMED OUT?

wo problems have plagued the workboat industry in the Gulf of Mexico (GOM) in the last few years. One was the booming shale play onshore in the U.S. The second, a consequence of the first, has been low oil and gas prices that made it hard, and often impossible, to make the economics work for workboat owners. Recently, however, a ray of hope surfaced. Oil prices have been slowly rising from its $26-bbl. low in February, doubling to almost $52 bbl. in October. This upward price movement was helped by a fall in U.S. crude stockpiles. Also supporting oil price increases was optimism that the Organization of the Petroleum Exporting Countries will secure an output cut. However, there are now doubts about OPEC’s ability to implement its planned production cut, which caused prices to fall in late October. Prices dipped almost 3% on Nov. 2 to $45.49 bbl. on news that crude stockpiles rose by 14.4 million bbls. for the week ended Oct. 28, according to the Energy Information Administration (EIA). Analysts expected a buildup of only 1 million bbls. It was reportedly the biggest ever rise in U.S. crude stockpiles in a week. Also, in October, the EIA estimated U.S. production in 2017 would be 100,000 bopd higher than in its previous forecast. This will be exacerbated by expected higher production in Russia and lower projected oil consumption globally in 2017. All this equates to a projected 2017 price for WTI of approximately $50 bbl. That price is not high enough to restart the GOM. John Hess, chief executive of Hess Corporation, said in a talk at the Oil & Money conference in London in October that restarting longer-cycle activity in the deepwater GOM requires oil prices in the $60- to $80-bbl. range. Given this scenario, oil prices that are sufficient to restart GOM deepwater ac-

tivity seems unlikely in the next couple of years. This hasn’t gone unnoticed by workboat owners or analysts. “We are in for another tough year for the offshore industry,” IHS Energy-Petrodata marine analyst Richard Sanchez said. “In the U.S.-Gulf, OSV owners have squeezed their operating costs as much as possible, and don’t believe they can shrink their margins any further. Day rates are very low for new charters, with little to no margin for the vessel owners. OSV resale values are also very low, but very few sale prices have been disclosed.” According to the October issue of IHS Energy’s Offshore Marine Monthly, “reductions in rig activity continue to grind down base demand for offshore supply vessels in the U.S. Gulf of Mexico.” Out of 32 contracted floating drilling rigs, only 22 have been working. There are five jackups under contract, but only three are working, according to Offshore Marine Monthly. Platform rigs, meanwhile, are down to three active units out of 19 under term charter. The report noted that in September, “the total supply of vessels in the U.S. Gulf swelled by 10 as three AHTSes and seven PSVs returned from jobs abroad.” According to the IHS report, out of the 410 vessels of all sizes in the GOM, 108 are working on term contract and 84 are employed in the spot market. Most of those 192 vessels are working at significantly reduced day rates. Tidewater’s U.S. deepwater vessel quarterly revenue was cut in half in the last year. — Bill Pike

he Coast Guard-industry joint effort for safer towing vessels and the removal of their uninspected label culminated with the June release of the final Subchapter M rule. At last count by the Coast Guard, 5,719 previously uninspected vessels

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_CoverStory_LINO.indd 37

SUBCHAPTER M FINAL RULE RELEASED

officially came under the new regime on July 20 — 3,905 of those in the Coast Guard’s Ninth District and the Western Rivers. But there is still a two-year phase-in until July 20, 2018, to comply with most of the final rule. It will be fully in place by 2022. Even after years of working together closely on what the final rule would bring, there was still some uncertainty between the industry and Coast Guard over the final version. At an Oct. 4 roundtable American Waterways Operators hosted in New Orleans for operators, a Coast Guard update noted 274 issues and questions that were being resolved. Topping the list is how the Coast Guard will interpret definitions of “major conversion” and “replacement in kind” for existing vessels. It was an immediate concern for operators who were worried that upgrading existing towing vessels with new, more efficient and cleaner engines could kick them into a category with newbuild boats, when vessels with keels laid after July 20, 2017, will be subject to more stringent requirements. “There are things still in flux with Subchapter M,” said Scott Kuhaneck, towing vessel program manager in the Coast Guard’s Office of Commercial Vessel Compliance, as the questions came pouring in. But repowering will not be a problem for operators, because under longstanding policy most of those will not rise to the level of major conversions, Kuhaneck said. Those determinations will be made on a case-by-case basis by the Coast Guard Marine Safety Center. Upgrading engines for better fuel efficiency, environmental compliance, and alternative fuel use are not normally considered major conversions, according to the Coast Guard. That position is based on the 35-year-old Navigation and Vessel Inspection Circular 10-81, which set out guidelines for classifying major conversions, well before Subchapter M. In its introduction, NVIC 10-81 lays out the rationale that now applies to towing vessels as well. 37

11/2/16 5:46 PM

Those regulators in 1981 recognized that “it is costly and impractical to require existing vessels to be modified each time a safety standard is updated,” the NVIC said. “However, when a major conversion or modification of an existing vessel is planned, there is a definite intent to extend the service life of the vessel,” the policy stated. “When this is the case, it is appropriate to bring the entire vessel into compliance with the latest safety standards where reasonable and practicable.” “Repowering may be deemed a major conversion if the intent is to extend the economic life of the vessel. Other re-engining modifications may not be deemed a major conversion if the economic savings of the conversion would be realized during the vessel's normal life,” the policy stated. There is also precedent for considering dual-fuel and liquefied natural gas conversions exempt from major conversions. That was the case when steam-powered vessels were converted to diesel for fuel efficiency. A major selling point of the new rule — and a practical matter to the already overextended Coast Guard — is Subchapter M’s flexible options for handling inspections. Operators can request Coast Guard inspections, use

Corps of Eng ineers

approved in-house safety management programs and surveys, or engage approved thirdparty inspection consultants. Bar ge tow s tr ans i t the Col or ado R i v er L ocks near The Coast Guard M at agor da, T exas , i n Jul y 2 0 1 3 . and third-party organizations — classification societies, consultants and Jeff Grybowski announced on Twitter, after the 433'×128' jackup vessel Brave others who will handle surveys and Tern lifted the last rotor blades into posafety management — are discussing sition. At 589' the turbines are among what will be expected of them. the tallest in the world. — Kirk Moore The jackup vessel was operated by Fred. Olsen Windcarrier AS of Oslo, Norway, one of the European operators US OFFSHORE with offshore wind turbine experience WIND ENERGY BEGINS being tapped by Deepwater and other aspiring U.S. developers. elayed by politics and the steep But down on the water was the first decline in competing energy U.S.-built crew transfer vessel — the prices, offshore wind energy in Atlantic Pioneer, christened April 22 U.S. waters finally got going in 2016. by Atlantic Wind Transfers of North Kingston, R.I., and built by Blount A year after installing foundaBoats at its Warren, R.I., yard. tions from Gulf Island Fabrication, Houma, La., Deepwater Wind The $4 million, 70'6"×24'×4' alumiLLC erected five 6-MW GE Haliade num catamaran entered service in May, turbines at its Block Island, R.I., site carrying workers and up to 15 tons starting Aug. 4. of equipment. A pair of MAN D2862 “The U.S. offshore industry has LE466 engines, each producing 1,400 started. First turbine installation comhp at 2,100 rpm, drive the CTV at plete at 8:30 a.m.,” Deepwater CEO speeds up to 30 knots.

Booth 3419

38 NationalFisherman0416.indd

WB_CoverStory_LINO.indd 38

ANNIVERSARY 1946 - 2016

4/8/2016 10:27:45 AM www.workboat.com • DECEMBER 2016 • WorkBoat

11/2/16 5:47 PM

WB_FULLS.indd 39

10/25/16 2:59 PM

that Impress Booth 2850

ABSOLUTELY NO DISCHARGE. INCINOLET incinerates waste to clean ash, only electricity needed. 120, 208 or 240 volts. INCINOLET – stainless steel, American made for years of satisfaction. Used in all climates around the world. Tested, listed by UL NSF USCG

Call 1-800-527-5551

www.incinolet.com

RESEARCH PRODUCTS • 2639 Andjon • Dallas, Texas 75220 40

WB_CoverStory_LINO.indd 40

The 2,800 combined horsepower has another purpose — driving the bow of the Atlantic Pioneer hard against the base of turbine towers, ensuring adhesion of the boat’s massive bow bumper while technicians safely climb a podium stair to the towers. “The boat is basically built around the technicians,” said Charles Donadio, president of Atlantic Wind Transfers. The cabin was built as a separate structure, isolated from the hull’s vibration, with shock mitigating suspension seats for the crew and technicians. Blount built the vessel under license from South Boats IOW, a United Kingdom-based designer and builder of CTVs for the British and European offshore wind industry. Based on the company’s 21-meter design, it is midsized as CTVs go. Other wind developers and equipment suppliers took note of the Blount design. Fishermen’s Energy LLC, which has plans for a five-turbine project similar to Deepwater Wind’s off Atlantic City, N.J., has been in discussions with Tuckahoe, N.J., boatbuilder Yank Marine about designing a vessel for their crews. Across the Atlantic, British and Norwegian shipyards are eyeing the U.S. market in search of U.S. partners, the way Blount and South Boats collaborated on the first U.S.-flagged CTV. Aluminum Marine Consultants Ltd. is another company like South Boats located on the Isle of Wight in the English Channel. “Aluminum welding was here 50 years prior, probably because we built flying boats here in the 1920s,” said AMC commercial director Rob Stewart. The industry trend is toward bigger turbines and bigger boats, and they anticipate similar needs in the U.S. industry as offshore leases develop in federal waters. “We started with 15-meter (49') boats and now we’re going to 26 meter (85') boats,” Stewart said. That new class is powered up to 2,800 hp, a requirement not only for commuting to the job sites, but also for pulling up to the turbine towers for disembarking and picking up

www.workboat.com • DECEMBER 2016 • WorkBoat

11/3/16 9:02 AM

The Trusted Source for Quality Systems Seating & Consoles

Ergonomic seating and consoles with custom options available.

Wiper Systems

STRAIGHT LINE WIPERS Rugged wiper motors, blades and arms purpose built for the sea.

THRUSTERS & STABILIZERS

Thrusters & Stabilizers

Innovative thrusters & stabilizers for precision control without compromise.

LED Marine Lighting

Advanced LED lighting solutions including VIMARÂŽ switching.

IMTRA COLORS 2016

Searchlights

Primary Use

Blue Pantone 647 96C 54M 5Y 27K

o Searchlights with unlimited 360 Secondary Use movement and intelligent control.

Pantone Cool Gray 7 20C 14M 12Y 40K

Pantone Cool Gray 2 5C 3M 5Y 11K

Black 0C 0M 0Y 100K

Pantone 368 65C 0M 100Y 0K

Pantone 629 36C 0M 9Y 0K

Controls & Joysticks

Award-winning controls with precision mechanics for a wide range of vessels.

Solar Blinds

Anti-glare, UV protection roller shades and solarSOLAR blinds. BLINDS

Be sure to see Imtra at Booth 1417

www.imtra.com 508-995-7000 November 30 - December 2, 2016 New Orleans, LA

WB_FULLS.indd 41

10/25/16 2:59 PM

Blou nt Boats

Remote Monitoring & Diagnostics for Commercial Vessels & Fleets

crews and cargo. In October the federal Bureau of Ocean Energy Management announced its final proposal to lease almost 80,000 acres in the New York Bight south of Long Island, close to busy traffic lanes into the port. Meanwhile DONG Energy, based in Denmark and a major player in the northern European wind industry, showed its growing interest in the U.S. market by acquiring leasing rights to large offshore tracts near Massachusetts and New Jersey. — K. Moore

NEW YORK CITY TO LAUNCH NEW FERRY SERVICE

Booth Booth 3905 0000 42 gplink_third.indd 1 WB_CoverStory_LINO.indd 42

w ay

i n A pr i l .

commercial marine market. To operate the system, city officials chose San Francisco-based Hornblower Cruises & Events, a longtime operator of tour and charter vessels in New York that formed a new subsidiary, HNY Ferry Fleet LLC. Its job is to make the system work, with a subsidized fare of $2.75 one-way, on par with the city subway system. All of those choices were controversial, especially given that other longtime local ferry operators like New York Water Taxi and NY Waterway were unsuccessful in their bids. “Usually, when purchasing a series of vessels of this scale, the first one is delivered about a year after the contract is signed, and subsequent boats come every six months,” wrote Tom Fox, a founder of New York Water Taxi and prominent industry figure, wrote in a skeptical commentary for Crain’s New York Business. “Will the product be a chimera? Or if the boats do materialize, will the city end up with a fleet with production problems, a short lifespan and high operating and maintenance

n about six months New York City will launch its new Citywide Ferry Service, one of the most ambitious public water transit ventures ever. It is a huge bet by the administration of New York Mayor Bill de Blasio — and one that could have big payoffs to the city’s industry partners. The first in a planned fleet of 19 Incat Crowther-designed 85'4"×26'3" catamarans will be delivered in spring 2017 by Horizon Shipbuilding Inc., Bayou La Batre, Ala., and Metal Shark, Jeanerette, La., marking the Gulf Coast shipyards’ first big foray into the ferry sector. Powering the vessels will be Moteurs Baudouin M26.3 diesels. The contract marks a major coup for the French-built diesel manufacturer and its distributor, Motor-Services Hugo Stamp Inc., A r endr i ng of the I ncat rC ow ther - d se i gned Fort Lauderdale, bui l t f or N ew Y or k's iC ty w i de F er r y S er v i ce. Fla., in the U.S. Horiz on Shipbu ilding

gplink.com

Atlantic Pioneer under

f er r i es

bei

www.workboat.com • DECEMBER 2016 • WorkBoat 10/13/2016 12:32:17 PM 11/2/16 5:48 PM

CONFIDENCE TO GO WHEREVER THE JOB TAKES YOU

FLEXIBLE RADAR SOLUTIONS;

ANY VESSEL, ANY APPLICATION

•

Choose from a range of radar technologies to suit diverse applications such as navigation, weather monitoring, docking support, and anti-piracy Enjoy effortless radar operation with our new R3016 16-inch widescreen and R2009 9-inch portrait Radar Control Units Trust robust Simrad construction to meet the high demands of offshore commercial use Satisfy SOLAS radar requirements with our IMO type-approved solutions

• • •

Booth 2635

12U/6X RADAR HALO RADAR IMO CAT 3

R3016

R2009

www.navico.com/commercial WB_FULLS.indd 43

10/25/16 2:59 PM

costs?” Hornblower, Horizon and Metal Shark say they knew what they were getting into. Proposals from about a

dozen shipyards were considered and “most of the yards could meet the schedule,” said Cameron Clark, vice president and general manager of

coxmarine.com

CXO300. DIESEL OUTBOARD. WITHOUT COMPROMISE.

EXPERIENCE IT UP CLOSE AT STAND 3963

Groundbreaking diesel outboard that gives robust gasoline performance with high efficiency 300 hp, 2-stroke supercharged, emissions compliant engine that weighs just 300 kg Professionally rated for medium duty commercial, it lasts three times longer than gasoline outboards

WB_CoverStory_LINO.indd 44

Hornblower’s New York operations. Clark said they were impressed with the boatyards’ track records for fast turnaround, and willingness to “rethink how you build boats.” One aspect of that is Horizon Shipyard’s proprietary Gordhead software that allows customers, builders and designers to view construction progress and communicate in real time. Incat Crowther too has its Gulf Coast team on the ground to work with the yards. In New York, Hornblower’s operations will be based at the old Brooklyn Navy Yard, under plans developed between the company and the city’s Economic Development Corporation. The homeport will have a team of inhouse technicians trained by Moteurs Baudouin to maintain the new engines. Meanwhile the harbor’s private commuter ferry operators are stepping up their game. NY Waterway commissioned the Betsy Ross, the second 109'×31'×6' aluminum catamaran built by Yank Marine, Tuckahoe, N.J., to carry up to 400 passengers. Along with its sistership Molly Pitcher, the two vessels represent a $10 million investment, and marked the 30th anniversary since NY Waterway founder Arthur E. Imperatore started the business with a single boat crossing the Hudson River.

www.workboat.com • DECEMBER 2016 • WorkBoat

11/2/16 5:59 PM

EASTERN SHIPBUILDING GROUP, INC.

FULL STEAM AHEAD

We are eager to serve you in 2017 and beyond!

Visit Us at Booth #2417 Nov 30 - Dec 2, 2016 in New Orleans

2200 Nelson Street, Panama City, FL 32401 To add an ESG built vessel 13300 Allanton Road, Panama City, FL 32404 to your fleet, contact us at: www.easternshipbuilding.com Tel: 850-763-1900 ext 3216 Fax: 850-763-7904 Email: sberthold@easternshipbuilding.com www.youtube.com/user/EasternShipbuilding

NEW CONSTRUCTION WB_FULLS.indd Current2016-6-WB8.125x10.875.indd 45 1

•

REPAIRS

•

CONVERSIONS 10/14/2016 10/25/16 10:23:06 2:59 PMPM

NORMACONNECT® FGR PIP E CO UP LINGS

David K rapf

The Cost- Effective Alternative for Joining Both P lastic and Metal P ipes

That investment has paid off, with ridership at the sisterships’ terminal at Belford, N.J., up 18% since September 2015, the company said. Not to be outdone, competitor Seastreak LLC The 2 0 1 6 gr adut i on engaged Incat M ar i ne Academ y in Crowther and Gulf Craft LLC, Franklin, La., to build a 600-passenger highspeed catamaran ferry. The 147' design is a step up from Seastreak’s current stable of Incat Crowther designs, the largest of which carry up to 505 passengers. The company runs daily commuter service to Manhattan and seasonal connections to Martha’s Vineyard and Nantucket off Massachusetts. The planned boat is needed to “provide an operational advantage in a very competitive market,” Incat Crowther said in announcing the contract. — K. Moore

IWBS Booth #2062

normaAmeric asD S.com 1.855.NORMA2 U A quality brand of NORMA G roup

normaAmericasD S.com

WB_CoverStory_LINO.indd 46

USMMA INVESTIGATES SEXUAL HARASSMENT

n June, the U.S. Merchant Marine Academy (USMMA) and the Maritime Administration said they were reviewing a proposal from the industry to address long-simmering concerns over sexual harassment and hazing of academy midshipmen during their now-suspended Sea Year assignments. More than 90 industry representatives showed up for a “call to action” meeting June 24 at U.S. Department of Transportation headquarters in Washington, D.C. The session was convened for the maritime industry to present a proposal that improves the quality of life onboard vessels, and provides a working and training environment that is both safe and respectful for the midshipmen,” according to a joint statement issued through the academy. The traditional Sea Year, which

cer em Ki gsn

ony at the U . S. M er c hant Poi nt , N . Y . , w sa hel d i n June.

sends sophomores and juniors to sea for around 300 days, was suspended — with an announcement made during the academy’s June 16 graduation weekend at the Kings Point, N.Y., campus — amid concern that not enough was being done about recurring reports of harassment. USMMA officials cited concerns over “safety and mutual respect” for midshipmen serving on U.S.-flagged merchant vessels. The academy and Marad said no specific cases triggered the decision. Marad Administrator Paul “Chip” Jaenichen said in June that there have been “isolated incidents,” adding “it’s the harassment, it’s the hazing, it’s the coercion, it’s the retaliation,” that some midshipmen experience from crews. Surveys in recent years portray concern at the academy about its own culture and what midshipmen experience on vessels. A 2014-2015 survey identified four major concerns, including “inadequate sexual assault prevention training for midshipmen embarking on Sea Year,” and “insufficient engagement between the academy and the maritime industry on sexual harassment and sexual assault issues.” The survey notes that shipping companies involved with Sea Year are required to have zero-tolerance policies for sexual harassment, and midshipmen are able to report incidents either through company procedure or to academy officials. “Sea Year is and will remain a core element of the academy’s academic program,” USMMA officials said in announcing the suspension in June.

www.workboat.com • DECEMBER 2016 • WorkBoat

11/2/16 5:49 PM

Together Thordon’s TG100 Shaft Seal with RiverTough Tailshaft Bearings will keep you pushing forward

Thordon RiverTough Tailshaft Bearing

Thordon TG100 Shaft Seal

• Longer wear life than rubber bearings in abrasive marine environments • Zero stick-slip vibration at lower shaft speeds • Reduced maintenance costs and downtime • Simple to install or retrofit • Emergency seal - safe return to port capability

Booth 2032

www.ThordonBearings.com

ZERO POLLUTION | HIGH PERFORMANCE | BEARING & SEAL SYSTEMS WB_FULLS.indd 47

10/25/16 2:59 PM

ow 40 t Sh oth t t a a Bo Bo 2, k or ec W -D 30 ov

e Se

78' (24m) Steel Research Vessel

Quality Commercial Vessels... Built by Burger to Your Requirements Burger is recognized worldwide for quality custom vessels that provide years of dependable service. • Aluminum and Steel Fabrication

n tructio

sel Co n s Under) Steel Explorer Ves

103’ (31m

• Fast Supply Boats

• Passenger Vessels

• Wind Farm Support Vessels

• Research Vessels

• Fishing Vessels

• Fast Crew Boats

• Other Vessels to 260' (80m)

New Construction | Vessel Haul-Out | Refit & Repair Services +1 920.686.5117 | sales@burgerboat.com | burgerboat.com/commercial Proudly built in the USA

Booth 927

WB_CoverStory_LINO.indd 48

“There is a need to ensure the safety and mutual respect for all midshipmen on vessels during Sea Year.” In October, the USMMA Alumni Association and Foundation created a task force and commissioned a study to address sexual misconduct at the academy. The task force will “review best practices on preventing and responding to sexual assault and harassment and provide recommendations on addressing sexual misconduct on USMMA’s campus and during the Sea Year core curricula training.” The task force is chaired by Capt. Eileen Roberson, U.S. Navy (Ret.), and includes three additional women and three men. Five members — including 1980 graduate Roberson — are USMMA alumni. “Task Force members represent diverse parts of the maritime industry and come from different maritime schools. We all care deeply about this issue and are united in our commitment to finding effective ways to ensure positive and lasting change,” Capt. Roberson said. The group has retained Self Solutions, a veteran-owned business, to conduct research into sexual misconduct at the academy. The final report on its findings will be made public. “We stand ready to support the U.S. Merchant Marine Academy in developing a facts-based plan for eliminating sexual misconduct and ensuring that current and future midshipmen are effectively trained in a safe environment,” Roberson said. “Self Solutions is the right company for the job given their extensive experience analyzing behaviors on ships and academy campuses.” Also in October, Sen. Kirsten Gillibrand, D-N.Y., proposed a plan designed to end the “scourge” of sexual assault and harassment of midshipmen at USMMA. Gillibrand wants to provide midshipmen with more resources and support to report abuse and harassment, and better train staff at the academy to respond to and prevent sexual assault. The plan also called for the Department of Transportation inspector

www.workboat.com • DECEMBER 2016 • WorkBoat

11/2/16 5:49 PM

Safe Passage. Secure Cargo. Sound Investment. For over a century, CPV Manufacturing has provided safe and reliable valves and fittings worldwide. With state-of-the-art design, quality control, and attention to service, CPV Manufacturing provides assurance that valves and fittings couple perfectly, function effectively, and provide years of trouble-free service. Donâ&#x20AC;&#x2122;t put your crew, your vessel, and your cargo at risk. Count on the valves and fittings that provide safe and reliable performance for your daily operations. Put the CPV trusted brand to work for you.

For more information: 866-708-1950 sales@cpvmfg.com www.cpvmfg.com American Engineering Trusted Worldwide

WB_FULLS.indd 49

10/25/16 3:00 PM

WATERMAKER INNOVATIONS MEET QUALITY AND RELIABILITY, GUARANTEED. WORKBOATS • COMMERCIAL VESSELS • OIL RIGS AND PLATFORMS • HOTELS AND LAND-BASED SYSTEMS

– Up to 150 m3 / 40,000 GPD – Semi or Fully Automatic Operation – MODBUS Interface – Certified HMI/PLC Touch Screen Control System – Engineered For Dependability And User-Friendly Access – Class 1 Div 2 Area Classification Available

general to be trained and empowered to investigate reports of abuse. “The price of an education and job training at sea cannot be sexual assault and harassment,” Gillibrand said in a statement. “The U.S. Merchant Marine Academy is the premier school for midshipmen to start careers supporting the military and on commercial carriers at sea — to become the best mariners in the world — so to have more than six out of 10 female midshipmen and more than one out of 10 male midshipmen say they were sexually harassed in a year is completely unacceptable. To have 17 percent of female midshipmen sexually assaulted is outrageous.” Gillibrand cited numbers from the 2014-15 survey in which 63% of women and 11% of men at the academy said they had been sexually harassed. The same survey found that harassment and assault were seldom formally reported because respondents felt uncomfortable or feared retribution. Gillibrand said she would introduce the reform plan as Senate legislation. — Ashley Herriman, K. Moore and David Krapf

INLAND WATERWAYS TRAFFIC COOLS OFF

(801) 906-8840 Toll Free (800) 850-0123 www.fciwatermakers.com

Booth 3616

WB_CoverStory_LINO.indd 50

or the inland waterways, 2016 has been unusual: a down cycle has emerged in almost all commodities transported by barge. There are many reasons behind this. Among them is a worldwide economic slowdown, especially in China; environmental regulations and competition from natural gas that has produced a big decline in the use of coal; a sharp decline in oil prices that has rippled The downturn in the coal market has added through the barge supply to the covered hopper barge fleet. business; a strong dollar that makes David K rapf

Over 30 Years Of Innovating.

exports more expensive; and weakening of South American currencies that make certain grain imports cheaper than U.S.-sourced grain, thus reducing demand for inland barge movements. “Nearly every sector of our business is facing very difficult market conditions, and it is not clear yet where the bottom of the trough is,” Tom Allegretti, president and CEO of the American Waterways Operators, said at an industry conference in March. “We all know that this is a cyclical business, but what’s particularly challenging today is that all the major commodity groups — petroleum, coal, agricultural products — are in a down cycle.” In addition, the industry has had to deal with other challenges in 2016. It must comply with Subchapter M, the new federal towboat inspection rule, secure stable federal funding to modernize the nation’s antiquated locks and dams, and pass a law that ends a patchwork of overlapping and contradictory state and federal regulations that govern the discharge of ballast water that is costly to the industry. On top of this, presidential and congressional elections injected a sense of uncertainty and worry into the economy that put barge operators on edge. “As the election approaches, everything in Washington, D.C., is viewed through a highly political lens, and it becomes even more difficult than usual for policymakers to focus on the people’s business,” Allegretti added. But the biggest problem for the inland barge industry has been the global slowdown that has weakened the

www.workboat.com • DECEMBER 2016 • WorkBoat

11/2/16 5:50 PM

Booth 2837

WB_FULLS.indd 51

10/25/16 3:00 PM

Booth 1213

S i n c e 19 4 7

Rounds

Ov e r 8 0 S i z e s a n d S t y l e s ! C a s t A l u m i n u m C a s t S t e e l G a lv a n iz e d

Ovals

D e c k Ri n g s , P a r t s , C o a m i n g s , Et c .

1- 8 00- 4 5 5 - 3 9 17 C A T A L OG ONL I NE A T : W

Squares

. BA I ERMA RI NE. C OM

A v a ila b le D ir e c t a n d th r u C o m m e r c ia l Ma r i n e Eq u i p m e n t D i s t r i b u t o r s See website for Dealers and locations

Multi-Bolt

THE AUTOPILOT THAT WORKS AS HARD AS YOU DO. Since 1928 Marine Electrical Marine Electronics UL Listed Panel Shop Engineering 4020 23rd Avenue West Seattle, WA 98199 206-282-8080 2315 Airport Beach Road Dutch Harbor, AK 99692 907-581-1679

www.harriselectricinc.com 52

WB_CoverStory_LINO.indd 52

export market for many U.S. goods. A big factor is China’s declining growth rate. China has been a huge consumer of U.S. exports that move on U.S. waterways. Slowdowns in European and developing countries have also hurt U.S. commodity exports. “Everything is down simultaneously, except grain, which seems to be making a comeback as the export market comes back to us,” Ken Eriksen, senior vice president of transportation at Informa Economics, told WorkBoat in June. “And barge rates are still flatlined. Usually we have one segment that is doing well, but everything is down. We have not hit bottom yet.” The worst market has been coal, which has suffered a deep drop. As a result, some companies have converted open barges used for coal to covered barges for grain. This has hurt demand and expanded supply in the covered hopper market. Eriksen said he expects the coal downturn to be long term due to competition from natural gas and stricter federal emissions rules. One bright spot is corn. Corn will continue to help the dry cargo barge market, and the Panama Canal expansion could increase barge movements on the U.S. waterways. The liquid tank barge market is suffering as well, except for chemical movements. Several tank barge operators have been hurt by a combination of weak oil prices and pipeline projects coming online, which lessen the demand to move crude by inland barge. A surge in North American production over the past few years, due mostly to increased shale oil production, encouraged many companies, including Kirby Corp. and American Commercial Lines to expand their tank barge fleets. Houston-based Kirby’s net earnings in the third quarter were $32 million, or 59 cents per share, compared with $56.8 million, or $1.04 per share, for the 2015 third quarter. Kirby’s barge utilization was in the low-to-mid 80% range, down from the high-80% to low90% range during the second quarter. “The relatively sharp drop in utiliza-

www.workboat.com • DECEMBER 2016 • WorkBoat

11/2/16 5:50 PM

aking the right “PROPULSION” and “POWER” investment is critical. Motor-Services Hugo Stamp, Inc. is here to help and as an authorized distributor for Baudouin, Nanni, FPT, and Alamarin-Jet, we have the knowledge, inventory, and service teams available 24/7 from offices in Florida, Louisiana, and Maine.

Visit MSHS Booth 1941

Int’l WorkBoat Show New Orleans, Louisiana Nov. 30 - Dec. 2

For complete information on our products and services, call 954-763-3660 or toll free 800-622-6747 or visit www.mshs.com

Motor-Services Hugo Stamp, Inc. Authorized Distributor and Service Center info@mshs.com

WB_FULLS.indd 53

www.mshs.com

+1 954-763-3660

800-622-6747

10/25/16 3:00 PM

tion that we first experienced in July continued through most of the third quarter,” David Grzebinski, Kirby’s president and CEO, told analysts during Kirby’s October conference call with analysts. In response to the lower utilization, Kirby reduced its average towboat count by approximately 6% in the third quarter. “For the industry overall, weak utilization increases the likelihood that we will see a more rapid number of retirements and a decline in new equipment construction across the industry. This will facilitate an overall rebalancing in the market.” Grzebinski sees improvement in the market next year. “While the exact timing of recoveries in our markets is still unclear, we do believe the inland market will come into supply and demand balance some time in 2017” and pricing will improve. — Pamela Glass and D. Krapf

CONGRESS DEBATES ICEBREAKER PROGRAM

ith the Coast Guard’s only heavy polar icebreaker aging rapidly, legislators started putting serious cash into spending proposals for a new vessel and some suggested leasing a private vessel as a stopgap measure. But how much actual progress will be made toward new or slightly used equipment is anyone’s guess as polar region activity grows while U.S. resources limp along. The Coast Guard has only two icebreakers: the 399'×83'6"×28' Polar Star, built in 1976, and the 420'×82'×29' medium-duty Healy, launched in 1997. The heavy-duty Polar Sea, built in 1978, was put on inactive status in October 2011 after engine failure and is a source of spare

parts to keep sister Polar Star running. By contrast, Russia has 41 icebreakers with 11 more planned. “The Coast Guard requires at least two heavy icebreakers to recapitalize the existing fleet and meet current mission demands,” a spokesman said. “Later this year we will make a formal decision on reactivating Polar Sea or extending the service life of Polar Star until new assets are delivered.” A Coast Guard condition assessment suggests that reactivating Polar Sea would be “a lengthy, costly and risky approach to sustaining current heavy icebreaker capability,” the spokesman said. “Work could take twice as long as reactivating Polar Star at multiple times the cost.” A final decision will be made once an alternatives analysis with cost estimates is complete by year’s end. A new heavy icebreaker could cost $900 million to $1.1 billion. The Polar Star returned to service in 2013 after a

Naval Architects, Marine Engineers, Marine Surveyors

281-532-2080

Our Core Purpose ...is to Create.

•

shearer-group.com

Come See us at Booth #3154

Naval Architects and Marine Engineers

401-253-4318 • bristolharborgroup.com

WB_CoverStory_LINO.indd 54

www.workboat.com • DECEMBER 2016 • WorkBoat

11/2/16 5:50 PM

Booth 3562

WB_FULLS.indd 55

10/25/16 3:00 PM

three-year $90 million overhaul, and its life expectancy is another four to seven years. A recent study by the Government Accountability Office said there would be a three- to six-year gap in heavy icebreaking capability before a new icebreaker is operational. The Senate has included $1 billion in the defense bill for a new heavy icebreaker. Meanwhile, the Coast Guard and

members of a House committee differed on ways to temporarily augment the fleet. Before the House Subcommittee on Coast Guard and Maritime Transportation in July, Rep. Don Young, R-Alaska, pressed Coast Guard Vice Commandant Adm. Charles Michel on why the service wouldn’t consider using a privately owned icebreaker, which had provided services to Royal Dutch

Tethered. Not Bound. A binding safety tether is an unproductive bother. The Harken TR31 safety rail and trolley system helps eliminate that. Its compact cars are more responsive. Inside them four Delrin® rollers, guided equally by full contact with top and the bottom track rails, follow elevation changes and track radius contours as tight as 200 mm. The result? Free travel until in an incident, the TR31’s braking feature stops it immediately. Conforms to the requirements of the MCA Workboat code and EN795.2012 class D.

Booth 4134 www.harkenindustrial.com

For more information call 262-691-3320 and ask for Industrial Sales or email infoUSA@harkenindustrial.com

WB_CoverStory_LINO.indd 56

Shell before the oil giant halted its Arctic drilling operations. That vessel is reportedly the Aiviq, a 361'×80'×23' ice-class anchor handling/tug supply vessel owned by Edison Chouest Offshore, Cut Off, La. “Our commandant actually personally visited that vessel. We are of the opinion that that vessel is not suitable for military service without substantial refit,” Michel told Young. “You’ve always hated the idea of not owning the ship,” Young retorted. “That’s what I call a bullshit answer … military service? I’m talking about moving ice.” Committee Chairman Rep. Duncan Hunter, R-Calif., also asked if a nonmilitary vessel could do an icebreaker’s job. “We have very specific requirements for our vessels,” Michel said. Their missions go beyond just breaking ice to “the assertion of national sovereignty.” Then in September, Hunter asked House leadership for funding for the Coast Guard to lease or perhaps acquire a vessel. “In the case of the Aiviq, for instance, a bareboat charter would cost $22 million per year. A full charter would cost $33 million per year. And the purchase price is approximately $150 million — a great value to the Coast Guard without presenting any limitations associated with a lease,” his letter said. The Aiviq was towing Shell’s drilling rig Kulluk before the rig ran aground in Alaska in late 2012. Both Young and Hunter have received campaign contributions from principals of Edison Chouest, Federal Election Commission records show. “Hunter’s been supporting the idea of leasing vessels to bridge the icebreaker gap for longer than it’s been reported, and the Aiviq is the only medium-grade vessel in America that’s capable of meeting several Coast Guard missions — a fact the Coast Guard now concedes,” a Hunter spokesman said. Hunter also received a response from Michel to his letter about the Coast Guard’s views on leasing an icebreaker, saying that market research on the

www.workboat.com • DECEMBER 2016 • WorkBoat

11/3/16 9:11 AM

Visit Us At International Workboat Show Booth #3273

How to keep calm when the sea is anything but.

David Clark Rough-Water-Ready Digital Communication System Solutions. The new David Clark Digital Communication System is simple to use and configure, provides versatility for multi-mission platforms and features scalable, IP-based architecture that defies obsolescence for a future-proof solution. Ideal for crew members on board workboats, service vessels, tug and salvage boats, fire boats and patrol craft. Call 800-298-6235 (508-751-5800 Outside the USA) or visit www.davidclark.com

Scalability

Versatility

Simplicity

Made In USA ÂŠ 2016 David Clark Company Incorporated ÂŽ Green headset domes are a David Clark registered trademark.

WB_FULLS.indd 57 230-33310 Digital 8125X10875WB.indd 1

W W W. D AV I D C L A R K . C O M

10/25/16 10/14/16 3:01 5:15 PM

risk, and receive industry feedback on ways to make the polar icebreaker affordable while The heav y - dut y Polar Sea, bui l t i n 1 9 7 8 , w as p ut on providing the i nact i v e s tat us i n 2 0 1 1 af ter engi ne f ai l ur e and i s a s our ce of s par e par ts to epk s i s ter Polar Star r uni ng . capability to the fleet as quickly as possible,” the RFI states. Those studies will extended seasons and announcements be followed by a single contract for of more vessels to come. design and construction of the heavy The market is being propelled in icebreaker class. — Dale K. DuPont part by the unsettled political climate abroad and in part by those looking for cruises to new destinations on something other than a megaship with RIVER CRUISE REVIVAL thousands of passengers. CONTINUES Blount Small Ship Adventures, for example, gets people who say, “I didn’t know you could take a boat he U.S. rivers and waterways from the East Coast to Chicago,” said cruising renaissance that began Nancy Blount, president of the Warin earnest in 2012 has shown ren, R.I., cruise line that operates the little sign of slowing down. This year 184' 83-passenger Grande Caribe and has been especially busy with new pasGrande Mariner. One of their cruises is senger vessels, refurbished older boats, U.S. Coast G uard photo

Aiviq determined the vessel could “under certain legal and operational conditions, execute at least some of the Coast Guard’s 11 missions.” But it’s unclear whether it could fulfill Coast Guard icebreaker requirements because it hasn’t undergone thorough testing in ice trials and isn’t configured to conduct all of the icebreakers’ missions, Michel said. The Coast Guard is now asking shipbuilders how it might speed up its icebreakers program, and obtain the first new polar vessel by late 2023. A request for information (RFI) issued Oct. 25 requests “feedback on the notional Heavy Polar Icebreaker acquisition approach and schedule,” the Coast Guard’s early plan toward an eventual fleet of three heavy and three medium icebreakers. “In the proposed high-level acquisition approach, government-funded industry studies would be conducted to mature designs, reduce program

  Booth 919

   

         

       58

WB_CoverStory_LINO.indd 58

www.workboat.com • DECEMBER 2016 • WorkBoat

11/2/16 5:52 PM

Visit Us at the International WorkBoat Show, Booth #3335

FLEXIBLE SCALABLE EFFICIENT SUCCESSFUL Words our clients use to describe our Offshore Engineering Services No matter the size and scope of your marine project, Crowley’s offshore and project management professionals will help you achieve your objectives in the safest, most efficient and cost-effective manner possible.

Crowley.com/Engineering | 832.850.5322 crowley.com/social E N G I N E E R I N G · V E S S E L D E S I G N · C O N S T R U C T I O N M A N A G E M E N T · FA C I L I T I E S E N G I N E E R I N G M A N A G E M E N T M A R I N E O P E R AT I O N S & H E A V Y L I F T S E R V I C E S · O F F S H O R E E N G I N E E R I N G · A R C T I C LO G I S T I C S & O P E R AT I O N

WB_FULLS.indd 59

10/25/16 3:01 PM

Booth 4221

ety of East Coast itineraries starting in the spring of 2017 and give the line a fleet of nine Am er i can Quen S team boat , oper at or of the American ships. Queen ( abov e) , has bought a 2 8 0 ' cas i no boat that w i l l American be conv er ted i nt o a 1 6 6 - pas s engr al l - s ui te v es s el . Queen in late August bought a 280' casino boat it will convert into a exploded,” said Matt Dow, assistant 166-passenger all-suite vessel to be marine operations manager of the New named American Duchess. The boat’s Orleans Steamboat Co., which plans expected to set sail in June on the to convert an idled casino boat into inland rivers. a dinner and sightseeing vessel. The “We’re starved for more capacity,” former 185'×56' diesel electric-powered Ted Sykes, president and COO of sternwheeler will join the New Orleans the Memphis, Tenn.-based line told company’s Natchez on the Mississippi WorkBoat. The company now operates River later next year after renovations. the American Queen on the Mississippi Does Dow see more than day cruises and the American Empress in the Pain his future? “We’re not looking into cific Northwest. As for another possible anything serious for overnight right addition, he said, “This one will not now,” he said. satisfy the demand.” Still waiting to get back in the game “Over the last four years the overis the Delta Queen, which the National night riverboating market has really Trust for Historic Preservation put David K rapf

a 16-day trip from Rhode Island to the Windy City via bays, rivers, canals and four of the five Great Lakes. The initial riverboat rivalry featured American Cruise Lines (ACL) and the American Queen Steamboat Co. offering regular overnight journeys. The latest entrant is French America Line’s Louisiane, which set sail in October from New Orleans. Fresh from a multimillion-dollar makeover, the former 203'8", 150-passenger Columbia Queen will cruise the Mississippi, Ohio, Tennessee, Cumberland and Red rivers and the Gulf Intracoastal Waterway. In May, ACL’s 266' 185-passenger America began its inaugural season in New Orleans, giving the Guilford, Conn., company two vessels on the Mississippi and two on the Columbia/ Snake rivers — one of the country’s hottest cruise markets. In July, the line launched the 170-passenger American Constellation, which will offer a vari-

THINK AH EAD

NEW GENERATION TECHNOLOGY Sanitation Systems, Products & Supplies

• C ompac t • L igh tw eigh t • C orro sio n R esistan t • O do r F ree • S im ple I nstal latio n • E asy M ain ten an ce • C usto mer F rien dl y • C ost E ffec tive

Ahead Tank Model AT-12T

U.S.C.G. Certified Type II Marine Sanitation Device & I.M.O. Approved Sewage Treatment Plant

(337) 330-4407 headflusher@aheadtank.com www.aheadsanitationsystems.com 60

WB_CoverStory_LINO.indd 60

Intrinsically Safe, Incredibly Reliable.

Booth 1058

HX400IS Intrinsically Safe Submersible VHF • Intrinsically Safe (ANSI/UL 913-5th Ed) • Submersible IPX8 (4.92 ft or 1.5 meters for 30 min.) • 40 Programmable Land Mobile Channels 134 MHz to 174 MHz with CTCSS and DCS signaling • Built in Voice Scrambler for private communications www.seatracoffshore.com • Supplied with 2300mAh Li-Ion battery, and 110 VAC 3-hour quick charger

Call Sea-Trac at 504-737-0591 to speak with our Standard Horizon experts.

Nothing Takes to Water Like Standard Horizon

www.workboat.com • DECEMBER 2016 • WorkBoat

11/2/16 5:52 PM

OUR COATING EXPERTISE

IS CLOSER THAN EVER BEFORE.

GET THE SHERWIN-WILLIAMS SEAGUARD APP FOR MARINE VESSELS.

With over 4,000 distribution points, you’re never far from Sherwin-Williams products and support. And with our SeaGuard App, our stem-to-stern coating recommendations are available on the go, at your fingertips. n

Get coating and primer recommendations for each area of a wide variety of marine vessels – from accommodations and engine rooms to underwater hulls and commodity tanks

Review recommended DFT (mils) for each coat, total dry mils and coating attributes

Access detailed product data sheets

Available for FREE on Apple and Android tablets

North America 1.800.524.5979

Learn More sherwin-williams.com/protective

1327 Booth 0000

WB_FULLS.indd 61 sherw13096-02_Marine_WorkBoat_8-125x10-875_v01AR_20160923.indd 1

10/25/16 3:01 PM 9/23/16 10:21 AM

on its 2016 list of America’s 11 Most Endangered Historic Places. The 1926 paddlewheeler, currently docked in Houma, La., needs a congressional exemption from current fire hazard restrictions. The legislation is critical for securing an estimated $5 million in financing for restoration and renovation. — D.K. DuPont

LNG USE MOVES FORWARD

iquefied natural gas set major milestones in the U.S. maritime industry in 2016, both as an up and coming marine fuel, and an expanding commodity driving new exports out of Gulf Coast ports.

FRASER BRONZE FOUNDRY, INC. MANUFACTURING QUALITY ALUMINUM & BRONZE HARDWARE TO THE BOAT BUILDING INDUSTRY SINCE 1965 FFOR OR OUOUR R COM

PPLETE L E T E LLINE I N E OFOF PPRODUCT R OD U CT SS

www.fraserbronze.com 5625-48th Dr. NE Unit D Marysville, WA 98270 Toll Free: 877-264-1064 Fax: 360-657-4921 Made in USA

W e b u y Of f s h o r e S u p p o r t Ve s s e l s , Ba r g e s , T u g s , Ba r g e Ri g s , P la tfo r m s , a n d J a c k e ts fo r r e c y c lin g p u r p o s e s .

305 Dickson Road • Houma, LA 70363 • Phone 985.851.2225 “ C om p etitiv e p ricing and p rom p t p ay m ent” Location: Houma, La (off the Houma Navigational Canal) purchasing@reliantrecycling.com • www.reliantrecycling.com

Shipbuilders • Architects • Marine Engineers

PO Box 296, East Boothbay, Maine 04544 Phone: 207-633-6517 Fax: 207-633-7007 Email: info@washburndoughty.com www.washburndoughty.com Quality Craftsmanship in the Proud Maine Tradition

Booth 2651

Kirby Moran • 93’ x 38’ ASD • 6000 HP • Designed and Built by Washburn & Doughty Associates, Inc.

WB_CoverStory_LINO.indd 62

Early in the year Harvey Gulf International Marine put into service the first U.S. dual-fuel LNG powered vessel, the 310'×64'×25'6", 5,200-dwt OSV Harvey Energy. The occasion was notable too for the vessel’s initial fill-up. Harvey Gulf opened the first commercial marine LNG fueling terminal at its Port Fourchon, La., operations base. The Harvey Energy and sistership Harvey Power, named the 2015 Boat of the Year by WorkBoat magazine, are the first in a class of six dual-fuel OSVs. Easier maintenance, cleaner engines and boats, and long intervals between overhauls all figured in to Harvey Gulf’s decision to make a decisive commitment to the new fuel, said Chad Verret, the company’s executive vice president in charge of Alaska and LNG operations. Oil remains cheap for now, but the long-term reasoning that LNG is the wave of the future has brought other major new vessels into service. In January TOTE Maritime gassed up its new 764', 3,100-TEU containership Isla Bella for the first time, using bunkering trucks at its Jacksonville, Fla., terminal. LNG will fuel the Isla Bella and sistership Perla del Caribe on their route to San Juan, Puerto Rico. Like Harvey Gulf, TOTE’s plan is for a permanent fixed LNG bunkering station in San Juan and another at Tacoma, Wash., for its Pacific Northwest operations. The other major Puerto Rico line, Crowley Maritime, likewise has a pair of LNG combination container-ro/ro ships scheduled for delivery from VT Halter Marine in 2017. With LNG marine power comes more need for bunkering options. In September Harvey Gulf said it had approval from the Coast Guard and American Bureau of Shipping for a design to build an LNG articulated tugbarge capable of carrying 4,000 cubic meters of fuel. With a 128'×42'×19', 5,100-hp tug and a 324'×64'×32'6" barge, the ATB will be capable of ship-to-ship fueling and shoreside resupply. With the first U.S. LNG bunkering

www.workboat.com • DECEMBER 2016 • WorkBoat

11/3/16 1:01 PM

POWER

WORK Engines for prop ulsion Engines for auxil liary app Tailored lications transmis sion Type-app roved in s strumen tation

Complete and Committed. THE SCANIA MARINE SOLUTION. Out there, confidence in performance, reliability and operating economy are the only things that count. With this in mind, we created the Scania marine solution: An array of flexible products paired with guidance and installation support from Scania. Whatever your specification, we will provide you with the optimal Scania marine solution. Power at work, every inch of the way. www.scaniausa.com

Booth 3201

WB_FULLS.indd 63 C301589_Scania_Marine_solution_ads_US_213x289.indd 2

10/25/16 3:01 PM 2014-09-30 09:14

When

the newly widened Panama Canal. With Cheniere Energy Inc., the first exporter of U.S. shale gas opening a second terminal on the Sabine Pass River on the border between Texas and Louisiana in The 310'x64' OSV Harvey Energy, the first U.S. Cameron Parish, dual-fuel LNG vessel, takes on an LNG bunker La., other compaat its Port Fourchon, La., terminal. nies are looking to expand port operations in the area. — K. Moore ill-fated containership’s final hours. The VDR has yielded 26 hours of information including bridge audio, navigational data and onboard radar EL FARO’S VOYAGE DATA RECORDER images before the 40-year-old steamRECOVERED ship sank during Hurricane Joaquin on Oct. 1, 2015, killing all 33 aboard. The recording that began early on he August recovery of El Faro’s Sept. 30 after El Faro left Jacksonville, voyage data recorder (VDR) Fla., captures the master and crew hopefully will shed light on the Harvey G ulf International Marine

barge under construction at Conrad Industries, the shipyard and The Shearer Group looked to the Coast Guard to approve plans for a new inland waterways towboat powered by a Wärtsilä dual-fuel propulsion system. On the rivers, “the infrastructure for supplying fuel (LNG) to towboats will happen. We just need several parties to get together to make it happen,” said designer Ed Shearer of The Shearer Group. LNG can lower shipping rates and save operators 15 cents per ton over diesel power for the same amount of cargo, said John Hatley, Wärtsilä’s vice president ship power. “It’s the cleanest fuel after [engine] combustion that we have, and we have 200-years-plus of gas that’s going to be available” in U.S. reserves, he said. Exports of that methane resource are growing, with Gulf of Mexico ports ramping up to supply Japan and other Asian buyers with shipments through

it’ s grim,

y ou need Great

At G reat American, we can mak e grim lik e it never h appened. Contact us for hull, P &I and a complete line of insurance products for the marine industry. Contact Cap’t Ed Wilmot / ewilmot@ gaic.com Ocean Marine Division I GreatAmericanOcean.com ©201 4 G reat American Insurance Company, an auth oriz ed insurer in all 50 states and D .C Great American Insurance G roup Tower I 3 01 E F ourth Street I Cincinnati, O H 4 5202

WB_CoverStory_LINO.indd 64

Ocean Marine Division

www.workboat.com • DECEMBER 2016 • WorkBoat

11/3/16 1:01 PM

Count On Cummins

Booth 2901

While the requirements of the marine market are evolving, one thing remains the same â&#x20AC;&#x201C; our commitment to providing you with responsive, reliable Cummins marine diesels that operate cleanly and efficiently. Popular with barge, tug, and crewboat operators across the U.S., the Cummins QSK38 1,000 hp and 1,300 hp EPA Tier 3-certified ratings continue to deliver the reliability and performance that operators have come to depend on. For more information go to cumminsengines.com/marine or contact your local Cummins distributor for more information.

ÂŠ2016 Cummins Inc., 4500 Leeds Ave., Suite 301, Charleston, SC 29405 U.S.A.

WB_FULLS.indd 65

10/25/16 3:01 PM

CUMMINS.5759.Workboat_QSK38.indd 1

22/08/2016 10:34

only move toward analysis after the third hearing is complete.” At a hearing in May, a former captain told the El F ar o’ s v oy age dat a r ecor der caps ul e on Coast Guard that El top of the s hi p’ s nav i gat i on br i dge. Faro and sistership El Morro could Joaquin’s forecasted path. But the be slower to recover from rolls when storm took its swing toward the El heavily loaded, a characteristic that Faro’s path as the vessel suffered a led its officers to add more margin of major casualty to its main propulsion. safety when calculating the effects of El Faro was already scheduled for loading. replacement on TOTE’s Puerto Rico When the ships rolled, they came route by the newly delivered 764' LNGback with “a very slow return,” said powered containership Isla Bella. Capt. Jack Hearn, who served on TOTE also is involved in litigation TOTE’s Sea Star Line and charted a involving El Faro, and as of October course to avoid Hurricane Sandy in the company said it had reached finanOctober 2012. “You could feel the ship cial settlements with 23 of the families as it leaned over.” involved “through a respectful and The board also heard how El Faro equitable mediation process.” Capt. Michael Davidson had planned — D.K. DuPont his course to pass west and south of NTSB

discussing flooding, the vessel’s list and loss of propulsion. It ends about 10 minutes after the master sounded the abandon ship alarm northeast of Crooked Island, Bahamas, the National Transportation Safety Board (NTSB) said. The VDR was the last of the key components to be found. The board expects to release the VDR transcript along with other documents sometime in December or early January, a spokesman said. They don’t expect to have any conclusions as they and the Coast Guard each continue investigating the sinking of TOTE Maritime’s 790'×95' El Faro that was enroute to San Juan, Puerto Rico. VDR information will be included in the Coast Guard Marine Board of Investigation’s (MBI) third and final hearing on the El Faro sometime this winter, a spokesman said. “The MBI is currently still in the fact gathering portion of this investigation and will

Booth 2 9 2 7

WB_CoverStory_LINO.indd 66

www.workboat.com • DECEMBER 2016 • WorkBoat

11/2/16 5:53 PM

MARINE GENERATORS

Booth 1501

MARINE GENERATORS

F/V Insatiable by Fred Wahl Marine

WORLD CLASS SOLUTIONS

M40C3: 40kW @1800 RPM

Northern Lights C-Series generator sets provide world class solutions for the commercial marine operator.

1.800.762.0165 | www.northern-lights.com A1330

WB_FULLS.indd 67

10/25/16 3:01 PM

2016 BOATBUILDING REVIEW

2016

BBOATBUILDING O A T B U I L D I N G R EEVIEW V IE W

of the b oa ts f e a tu r e d i n W or k Boa t f r om D e c e m b e r 2 0 1 5 to N ov e m b e r 2 0 1 6 .

Ken H ocke

A re v ie w

WB_BoatBuilding_LINO.indd 68

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:29 PM

2016 BOATBUILDING REVIEW

DE CE MBER 2015

REV ISED P ILOT BOA T DES IGN

NY P OWER AUTHORITY TU G Great Lakes Shipyard

Gladding-Hearn Shipbuilding

Credit: MetalCraft Marine

Credit: Bristol H arbor G roup

Credit: Gladding-H

earn

ladding-Hearn Shipbuilding, Somerset, Mass., delivered the Manatee, a 52.7'×16.8'×4'6" pilot boat to the Tampa Bay Pilots Association in Tampa, Fla. “It’s the first of a revision of the Chesapeake Bay class,” said Peter Duclos, Gladding-Hearn’s president. The initial Chesapeake Bay pilot boat, designed by C. Raymond Hunt Associates in New Bedford, Mass., was built in 2003. Several years ago Gladding-Hearn did a survey of pilot boat associations to find out what qualities were most important to them in a pilot boat. “The top three,” said Duclos, “were saving fuel, going faster, and greater comfort. This boat addresses all three.” The difference between the Manatee and earlier pilot boats is that the Manatee utilizes dual Volvo-Penta IPS 650MC propulsion pods. The IPS pod system uses forward facing, counter rotating propellers. “It’s more efficient. It burns about 25% to 28% less fuel than conventional propeller drives,” said Duclos. The hull shape has slightly different lines to accommodate the pods. Visually the biggest difference would be in the placement of the wheelhouse. Now the pilots, sitting in any one of five Stidd seats, are slightly aft of the boat’s center of gravity. That addresses the pilots’ request for greater comfort.

he first of two 45' twin-screw 940hp steel tugboats was delivered to the New York Power Authority. The Daniel Joncaire II and a sister tug, B-I Breaker II, will maneuver massive ice booms that protect the Niagara Power Project. Designed by the Bristol Harbor Group Inc., Bristol, R.I., and built by Great Lakes Shipyard, Cleveland, the 45'×19'7"×6'1" tugs were built to operate in the ice of eastern Lake Erie, where the waters go into the Niagara River and hydroelectric plants. The annual ice boom installation protects the power plant intakes from being blocked by heavy ice floes. Propulsion for the new tugs come from a pair of Caterpillar C18 engines each producing 470 hp at 1,800 rpm. The Cats turn Michigan Wheel 46"×28" 4-bladed Nibral propellers through Twin Disc MGX5135SC gears. Steered by Jastram controls, the tugs have a rated speed of 6 knots. There is a Simrad electronics suite in each tug’s pilothouse, and on deck the crew of four has a Nabrico DF-156-20-7-HE towing winch to work with. Bollard pull is estimated at 11 tons.

J ANUAR

Y 2016

3,000-HP TU

NEW YORK FIREBOA T

Chesapeake Shipbuilding

MetalCraft Marine

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_BoatBuilding_LINO.indd 69

etalCraft Marine delivered the 66'×18'×3' fireboat William M. Feehan to the Fire Department City of New York late last year. The boat is named for the firefighter who was the oldest member of the department to lose his life during the Sept. 11, 2001, terrorist attacks on the World Trade Center in New York. The William M. Feehan is powered by three Caterpillar C-18 engines rated at 1,150 hp each, turning a trio of Hamilton HJ 403 waterjets with hoods connected by a ZF 665 transmission. That brings the boat’s top speed up to 41 knots, from a cruise speed of 32 knots. A Caterpillar C-9 engine rated at 510 hp drives the fire pump system, which includes two Darley ZSP models pushing 3,000 gpm at 150 psi that can dispense foam to one or both pumps. Up top is a Stang fire monitor mounted on the roof with remote controls, shooting 5,000 gpm at 80 psi. On deck, four Elkhart Brass Spit-Fire monitors — two electrically controlled on the bow, two operated manually amidships — put out 2,000 gpm at 80 psi each. For waterfront firefighting operations there are two Storz 6" land supply connections. Dry chemical suppressant is a 300-lb. Purple K agent, and there is a Feecon 1.5 foam system.

10/28/16 3:32 PM

2016 BOATBUILDING REVIEW

Credit: Vane Brothers

altimore-based Vane Brothers took delivery in November 2015 of the Fort Schulyer from Chesapeake Shipbuilding, Salisbury, Md. Designed by Entech Designs LLC, the 94'×34'×15' tug is powered by twin Caterpillar 3512 Tier 3 engines delivering a total of 3,000 hp. Twin Disc 6:1 reduction gears turn Troost 4-bladed open wheeled propellers. On deck, a JonRie InterTech single-drum hydraulic towing winch controls the barges in both towing and pushing operations. Crew comfort and safety is a top priori-

ty for Vane. An ergonomically designed wheelhouse and a roomy engine room are augmented by subtler elements that add to habitability on the boat. Rockwool insulation, over Mascoat thermal acoustic paint, enhances insulation and greatly contributes to noise control. In addition, the tug features soft-core panels and overheads as well as firerated doors to dampen sound. In the wheelhouse, the new tug is equipped with a full suite of Simrad electronics including Halo radars, gyro and satellite compasses and multifunction GPS and autopilot with touchscreen displays custom installed by Houma, La.-based Rhodes Electronics.

ULTRA-LIGHT INTE RVEN TION VES SEL

Bordelon Marine Shipbuilders

Credit: Bordelon Marine

ordelon Marine Shipbuilders, Houma, La., delivered the 257'×52'×18' ultra light intervention vessel Brandon Bordelon to its parent company, Bordelon Marine, in late 2015. Well intervention normally deals with entering a well for reasons other than drilling, including managing well production. Designed by the company’s naval architects, the highly specialized

Booth 3980

BOATS INTERNATIONAL

WB_BoatBuilding_LINO.indd 70

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:36 PM

Booth 1241

Maximum View & Control Innovative bridge ergonomics

AlphaBridge on the Robert Allan Ltd designed hybrid RotorTugÂŠ RT Evolution WB_FULLS.indd 71

www.jrc.am 10/25/16 3:01 PM

2016 BOATBUILDING REVIEW vessel features a helideck, a 60-ton AHC crane with 3,000 meters of wire, 60 berths, a mezzanine deck with internal office and control rooms capable of supporting two full work class ROV systems. The vessel also offers 6,200 sq. ft. of clear useable deck space. The new OSV comes equipped with two Sonardyne Ranger 2 Pro thruhull USBL (ultra short baseline) full systems. Brandon Bordelon delivers a fully integrated ROV control room tied into the vessel systems, bridge, office, and accommodation spaces. The new OSV is designed with removable bulwarks around the entire aft of the boat along with power, water, air, and hydraulic oil connections on the deck. The OSV is also equipped with four below deck Tier 3 generators, providing fully redundant power to the crane and ROV systems. Capacities include 144,000 gals. of fuel; 250,000 gals. drill water; and 23,000 gals. potable water. Twin Tier 3 Cummins QSK60M diesel engines, producing 2,200 hp each, provide the boat’s main propulsion power. The mains are directly connected to Schottel 1215 Z-drives. The boat is also fixed with two Schottel STT2 FP 950-hp bowthrusters.

PATROL

BOA

Brunswick Commercial & Government Products

design. “We launched this last year at WorkBoat with an extended beam that went from 10'2' to 12',” said Brunswick marketing coordinator Kelsey Nemeth.

SURVEY BO AT Scully’s Aluminum Boats Inc. Credit: K irk Moore

othing says you mean business like a machine gun. The 320 Justice Boston Whaler that Brunswick Commercial & Government Products, Edgewater, Fla., brought to the International WorkBoat Show in December sported both a .50 caliber M2 on the bow and 7.62 mm M240 on the gunwale. Built for a South American customer’s riverine patrol mission, the 32'×10'×22" Justice with its twin 300-hp Yamaha outboards dominated Brunswick’s display, alongside two rigid hull inflatables: a black 1100 Impact, and a gray 9-meter Interceptor, the hull built by MetalCraft Marine, Kingston, Ontario. The 1100 Impact is on its way to a south Florida customer to perform port security missions and is a beamier edition of the Brunswick

Ocean Charting Services

Credit: K irk Moore

cully’s Aluminum Boats Inc., Morgan City, La., displayed its 20'×8'6" shallow draft boat powered by a 150-hp Yamaha outboard. That model is employed in everything from survey work to monitoring whale activity near ports, said company representative Kenny Patureau. Built of 3/16" aluminum throughout, the boat cruises at 35 to 38 knots and can hit 45 knots flat out. It features a pair of 40-gal.

For improved compliance, efficiency and better Bridge Management

410-820-9600

FREE TRIAL 2 Vessels – 2 Months 90 Towing Tugs use OCS service

Light Lists & Coast Pilots Updated with Replacement Pages 72

WB_BoatBuilding_LINO.indd 72

Self-Adhesive Chartlets No Hand Drawn Corrections

Time Saved Pays For Service

www.oceanchartingservices.com www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:36 PM

Booth 117

ELIMINATE BOAT ROLL A stabilized vessel means a safer crew, steady productivity, and more profits. Designed to meet the rigorous demands of commercial and military operators. The new Seakeeper HD line. seakeeper.com

Boat Roll in Degrees

15º 10º 5º 0º 5º 10º 15º OFF

WB_FULLS.indd 73 Seakeeper_HD_Ad-Workboat_December_2016.indd 1

11/7/16 3:02 3:48 PM PM 11/2/16

2016 BOATBUILDING REVIEW tanks with a new U.S. Environmental Protection Agency-compliant fueling system to prevent boil-over and spills from thermal expansion. One more feature: every Scully boat has the company’s telephone number engraved on the boat and the helm station. “The market for this boat is just like if you buy a fleet of trucks and put them out on the road with drivers,” Patureau explained. “If they have an issue, they can call us.”

FE BRUAR Y 2016 Z-TE CH TUG Eastern Shipbuilding Group

Credit: Eastern Shipbui lding G rou p

astern Shipbuilding Group Inc., Panama City, Fla., delivered the 80'×38'3"×15'9" Z-Tech tug Triton to Houston-based Suderman & Young Towing Co. in December. The new tug is the first of four 2400 class terminal and escort tugs currently under construction at the shipyard. Designed by Robert Allan Ltd., the tug’s main propulsion comes from twin Caterpillar 3516C, Tier 3 diesels, producing a total of 5,150 hp at 1,600 rpm, connected to Schottel SRP 1215FP Z-drives in nozzles. Ship’s service power is

the responsibility of two John Deere 4045AFM85 powered gensets, sparking 99 kW of electrical power each. The hawser winch is a Markey Machinery Fairleader DEPCF-48S, 50 hp, 36"-wide electric hawser winch with a brake drum/mid-drum holding capacity of 300,000 lbs. Operated by a crew of six, the Triton carries 38,000 gals. of fuel and 6,000 gals. potable water. The new tug is ABS classed Maltese Cross A1, Towing Vessel, AMS and Escort Service ABS Loadline, Statement of Compliance (SoC). Eastern is also building four identical Z-Tech tugs for Bay Houston Towing Co. The first, the H. Douglas M, was launched in November 2015.

WEST CO AST TOWBO AT

Booth 317

WB_BoatBuilding_LINO.indd 74

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:37 PM

Booth 3480

WB_FULLS.indd 75

10/25/16 3:02 PM

2016 BOATBUILDING REVIEW

Vigor Industrial

Credit: Tidewater Transportation & Term inals

igor Industrial’s Portland, Ore., shipyard delivered the second in a series of 102'×38'×11' towboats to Vancouver, Wash.-based Tidewater Transportation & Terminals. Designed by CT Marine, Edgecomb, Maine, the new “environmentally friendly” Granite Point is powered by a pair of Tier 3 Caterpillar 3516C main engines, each rated at 2,240 hp at 1,600 rpm. Through Karl Senner-supplied

Reintjes WAF873 reverse-reduction gears with 7.455:1 reduction ratios, the Cats turn 92"×100" fixed-pitch, 5-bladed stainless-steel propellers in CT28 Kort nozzles. The engines are connected to the gears by Centalink torsional couplings. Ship’s service power comes from two Cat C7.1 Tier 3 generator sets, each sparking 200 kW at 1,800 rpm. These boats operate on a river system that stretches 465 miles and specializes in high winds and extreme currents. To facilitate safe and efficient operations in these conditions, the boats have enhanced steering systems with four free-hanging steering rudders and four free-hanging flanking rudders. The new boat is also quiet in keeping with the company’s focus on crew comfort and endurance. Noise Control Engineering LLC, Billerica, Mass., developed the sound and vibration control package that includes Christie and Grey engine mounts and comprehensive acoustic insulation.

Customized service support. With you every step of the way. Assuring the availability of your application is a critical part of securing your business. Get the right service to reduce downtime. www.abb.com/turbocharging

Booth 3511

WB_BoatBuilding_LINO.indd 76

Noise levels register at less than 60 dB in the accommodations areas during vessel operations.

DELA

WARE P ILOT BOA T Gladding-Hearn Shipbuilding

Credit: G ladding- Hearn Shipbu ilding

ladding-Hearn Shipbuilding in Somerset, Mass., delivered the J.P. Virden, a 52.6'×17'×4.8' pilot boat to the Delaware Pilots Association in Lewes, Del. It’s a Chesapeake-class design from C. Raymond Hunt Associates in New Bedford, Mass., and the third Chesapeake-class pilot boat sent from Gladding-Hearn Shipbuilding to the Delaware pilots. The first one was delivered in 2004 and the second in 2006. Main propulsion comes from a pair of 651-hp Volvo-Penta D16 engines matched up with ZF 500-1-A marine gears and 5-bladed nibral props. Another feature on the J.P. Virden that’s not on the previous two Chesapeakeclass pilot boats for Delaware is the Humphree Interceptor automatic trim optimization system. For boats in the 25-knot-plus range, there’s definitely a payback in fuel. The Humphree system automatically optimizes the trim of a boat at a given speed or for a given fuel load. That allows pilots to have different trim tab settings at different speeds and when going up wind and down wind. Though the automatic feature can be overridden to manually control the trim tabs.

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:37 PM

TIER 3 VESSELS

Built To Your Specifications

Conventional House Design

3000 HP 100’ X 34’ Z-Drive - or Conventional Double Hull Oil & Fuel Tanks

Retractable House Design

CAT 3512C 1500 HP Tier 3 Total Engine Set 3000 HP No Urea after-treatment required Engines currently on order for 4 vessels Steiner Construction Company, Inc. (251) 824-2320 SteinerMarine@yahoo.com SteinerMarine.com

Also available: 70’ X 30’ (2) C32 1000 HP each Z-Drive or Conventional Built to Subchapter M Stability Requirements. | Vessel Delivery Fall 2017 Complete CAT Package: CAT Propulsion Engines CAT Z-Drive Optimized Thrusters CAT Generators CAT Financing Available CAT Propulsion Z-Drive Optimized Thruster

WB_FULLS.indd 77 Thompson-183v2.indd 2

CAT 3512C T3

10/25/16 3:02 PM 10/21/16 1:19 PM

2016 BOATBUILDING REVIEW

AMP HIBI OUS INTE RCEP TOR VES SEL ReconCraft

Credit: R econCraft

he ReconCraft RC-36C-SLG Amphibious Interceptor Vessel is built for stealth. The Newton, Mass., company started out with its 21' Riverine Shallow Draft Vessel (RSDV-21), a waterjet boat that can run in 4" of

water on plane, designed for the U.S. Customs and Border Protection to use on shallow waters along the U.S.Mexico border. As part of that program ReconCraft developed a patent pending grate system that keeps weeds and debris out of waterjet intakes. The new 36'×12'10"×23" RC-36C is similarly built for skinny water, able to run in 10" to 12" on plane, pushed by twin 335-hp Mercruiser diesels at up to 45 knots. But it is a bigger, self-contained package, designed to roll up quietly to a launch site at 7 mph on land, and deploy its radar and other sensors. The builders are looking at ways to incorporate a tethered aerial drone system to extend that field of vision. The aluminum hull includes a 5086/5083 alloy bottom plate 6 mm thick, coated with the proprietary Hull Shield abrasion resistant elastomer and ultra-high molecular weight (UHMW) thermoplastic polyethylene. The gunwale is ringed

with a high-density foam collar-sponson, edged with a black or non-marking rub rail.

TUG DES IGN REFI NEMEN T St. Johns Ship Building

Credit: J im

Denske, Vane Brothers

n January 2016, the tug Elizabeth Anne was delivered to Vane Brothers Co. by St. Johns Ship Build-

Booth 559

WB_BoatBuilding_LINO.indd 78

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:40 PM

Booth 2727

Mac k B orin g & Parts C o. Phone: (908) 964-0700 East Coast

WB_FULLS.indd 79

10/25/16 3:02 PM

2016 BOATBUILDING REVIEW ing. For Baltimore-based Vane, the 100'×34'×15'4" model bow tug is the 30th vessel in the company’s tug building program that began 15 years ago. The new Elizabeth Anne-class tugs represent the refinement of a design from Entech Designs LLC that has served Vane Brothers well as the company has expanded its reach beyond its home waters of the Chesapeake and Delaware Bay region. The new tug, the first of eight 100-footers to be built at the Palatka, Fla., shipyard located about 70 miles south of Jacksonville, is powered by twin Caterpillar 3516C Tier 3-compliant engines each putting out 2,100 hp at 1,600 rpm. The engines spin Hung Shen 104", 4-bladed fixedpitch propellers through Karl Sennersupplied Reintjes WAF 873 reverse reduction gearboxes with 7:1 reduction ratios. Each new Elizabeth Anne-class tug will have Jastram hydraulic steering systems and feature an open-wheel

and rudder configuration. On deck is an Intercon DD200 double-drum stern winch for coastal towing.

MARCH

2016

ATB TU

VT Halter Marine

Credit: Bou chard Transportation Co. Inc.

ouchard Transportation Co. Inc., Melville, N.Y., took delivery Feb. 1, 2016, of the 138'×38'×20', 6,000 hp tug Morton S. Bouchard Jr. It is the first of two 6,000-hp tugs that will be part of articulated tug-barge (ATB) units being built for Bouchard by VT Halter Marine Inc., Pascagoula, Miss. The tug was built at Halter’s Moss Point Marine facility in Escatawpa, Miss., where its sistership, the Frederick E. Bouchard, is under construction and set for delivery in June. The Morton S. Bouchard Jr. is equipped with an Intercon coupler system for pushing its mated barge. Propulsion comes from two EMD 12-710G7C-T3 engines, turning 3,000 hp each at 900 rpm. The Lufkin RS2800HG vertical offset 4.9:1 gears spin two 5-bladed manganese-bronze propellers measuring 140"×94", with steering gear from Engine Monitor Inc. (EMI). That combination yields a speed of 14 knots

High Standards and Cutting Edge Technology Booth 3643

44’ Harbor Tug

65’ Harbor Tug

47’ Dive Support Vessel Photos

Rozema Boat Works for more than 60 years. Building safe and reliable vessels to meet our customers’ exact specifications is our top priority. Contact us Today!

www.rozemaboatworks.com

WB_BoatBuilding_LINO.indd 80

11130 Bayview-Edison Rd. Mount Vernon, WA 98273 P: (360) 757-6004 F: (360) 757-6005

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:40 PM

Booth 3619

WB_FULLS.indd 81

10/25/16 3:02 PM

2016 BOATBUILDING REVIEW and bollard pull of 83.44 short tons. Tankage includes 150,000 gals. of fuel in 10 tanks; 60,000 gals. ballast in six tanks; 11,000 gals. oils; and 11,000 gals. potable water. Ship’s service power comes from three John Deere 6068AFM85 generator-drive engines rated at 130 kW each and a Deere 4045AFM85 generator-drive engine rated at 99 kW.

EXP

EDI TION STYLE PASSENGE R VES SELS Nichols Brothers Boat Builders

TEEX Center for Marine Training and Safety Galveston Courses

• Proficiency in Survival Craft • Fast Rescue Boat • Personal Survival Techniques • Coastal Oil Spill Control • Coastal Oil Spill Refresher • Freshwater Oil Spill Control • Freshwater Oil Spill Refresher

Credit: Li ndblad Ex peditions

ichols Brothers Boat Builders, Freeland, Wash., has been contracted by Lindblad Expeditions Holdings Inc., New York, to build two 100-passenger, 238'×48' expeditionstyle passenger vessels. The new boats will join two 68-passenger vessels built by Nichols for Lindblad in the early 1980s. Lindblad and National Geographic have partnered on the operation of expeditions cruises since 2004. The fleet, all of which carry the National Geographic name, operate all over the world. The Nichols-built

68-passenger boats are Lindblad’s only Jones Act-qualified vessels. The new boats will double the size of the company’s Jones Act fleet. Itineraries for the boats include Alaska and the Columbia-Snake River System. Delivery of the first vessel is expected in time for the 2017 Alaska summer cruise season. The second vessel will be completed a year later. Power for the vessels will be provided by pairs of MTU 2V4000M54 diesels, each rated at 1,600 hp. Volvo Penta will provide two 500-kW generators and one 230kW emergency generator. Reintjes reduction gears will turn fixed-pitch twin screws. An electric bowthruster is also part of the propulsion package. Jensen Maritime Consultants, Seattle, is the naval architect for the project, and Tillberg Design International, Weston, Fla., is responsible for the interior design of the 50-stateroom boats.

Train with Experienced and Certified Marine Instructors

College Station Courses

• Basic Marine Firefighting • Advanced Marine Firefighting • Advanced Marine Firefighting Refresher • Combined Marine Firefighting • Marine Firefighting for Land-based Firefighters • LNG Spill Control & Fire Suppression • First Aid / CPR • Personal Survival Techniques • Personal Safety & Social Responsibility • STCW95 Basic Safety Training

TEEX.ORG/CMTS C17.9140.10

WB_BoatBuilding_LINO.indd 82

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:41 PM

Images for illustrative purpose only.

Booth 3735

THE CALM BEFORE, DURING, AND AFTER THE

STORM

NO MATTER WHAT MOTHER NATURE THROWS AT YOU, TRUST THE FLIR M400 THERMAL NIGHT VISION CAMERA TO BE YOUR EYES IN THE DARK SO YOU CAN NAVIGATE STRESS-FREE.

WB_FULLS.indd 83

10/25/16 3:02 PM

2016 BOATBUILDING REVIEW

FAST SUPPLY VES SEL Gulf Craft

Credit: Gulf C

raft

ulf Craft, Franklin, La., delivered the 208'×32'×15' multipurpose, fast offshore support vessel (FSV) Alya McCall to Seacor Marine, Houma, La., in October 2015. Designed by Incat Crowther, the new FSV is the first vessel in the Seacor Express Plus

class and features lines not ordinarily found in traditional monohull FSV designs. The aluminum vessel can haul up to 20,000 gals. of ship’s fuel oil; 60,000 gals. cargo fuel; 5,000 gals. fresh water; and 500 gals. lube oil. The 136'6"×26'6" rear cargo deck can handle up to 300 LT of freight. There is seating inside for 100 and accommodations for 12 crewmembers. Main propulsion comes from five Cummins QSK 60, Tier 3 diesel engines, each producing 2,680 hp at 1,900 rpm, connected to HamiltonJet HT 810 waterjets through Twin Disc MGX61500-SC marine gears. A cardan shafting system by Driveline Service of Portland (Ore.) connects the gearboxes to the waterjets. Alya McCall has a running speed of 38 knots. Stationkeeping capability is provided through the combination of three Thrustmaster 30TT200 electric-mechanical tunnel thrusters working in conjunction with

the azimuth-like waterjets, all of which are controlled by a Kongsberg DP-2 dynamic positioning system.

CRA WLING LANDING CRA FT Hard Drive Marine

Credit: H ard Drive Marine

nyone looking for a 30'×10' landing craft with a couple of unusual

Booth 1112

DON’T BUILD A FERRY. BUILD A LEGEND.

www.gladding-hearn.com

WB_BoatBuilding_LINO.indd 84

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:44 PM

We don’t offer what we have but

GLOBAL NETWORK

What you need

LIFECYCLE EFFICIENCY

ENVIRONMENTAL COMPLIANCE

LOWEST FUEL COSTS!

WÄRTSILÄ CONNECTS THE DOTS Finding what you really need is only possible when you have the best marine offering on earth to choose from. Wärtsilä is the market leader in improving efficiency, proven gas solutions and ensuring environmental compliance while protecting profitability. Our global service network offers support when and where you need it. Read more at www.wartsila.com

Meet us at the INTERNATIONAL WORKBOAT SHOW 30 Nov - 2 Dec 2016, New Orleans, LA, Stand 601

WB_FULLS.indd 85

10/25/16 3:02 PM

2016 BOATBUILDING REVIEW features should check out Hard Drive Marine in Bellingham, Wash. “It’s the only one like it,” said Hard Drive Marine’s owner Tom Day who also designed the landing craft and its beach crawling feature. “I built a landing craft and saw a need for having spikes on it because most of the landing craft land on beaches and if there were spikes on the door, you could secure the boat to the beach.” On one of the tests with the spiked ramp, “when the door was lifted up, the spikes actually drove the boat off the beach. I had to grab it real quick.” That led Day to initially think the idea of using spikes on the ramp was “pretty sketchy.” But it didn’t take long to realize that if he could control the spikes “then I’d have something.” That’s what he did, matching the hydraulically operated spikes up with the ramp, so when the ramp drops down, the spikes reach forward, dig into the shore, pull the boat up a bit, reach forward again and so on. It’s the reverse

for going back in the water. Day said it wasn’t his intention to pull the boat out of the water with the spikes, rather “to control the boat’s attitude at the beach, whether the tide is coming in or going out.” That can be done from the wheelhouse or remotely. Powered by Honda 225s, the 30-footer was delivered to the Washington State Park System for maintaining park properties.

AP RI L 2016 ARTI CU LATED TUG/BA RGE VT Halter Marine

Credit: K en H ocke

ouchard Transportation Co. Inc. christened a new 255,000-bbl. articulated tug-barge (ATB) unit in New Orleans in February. The ATB, part of the Melville, N.Y.-based coastal oil barge company’s major expansion program, is made up of the 150'×50', 10,000-hp tug Donna J. Bouchard and the 628'5"×91'×47' black oil tank barge B. No. 272. Designed by Guarino & Cox, Covington, La., the barge has a deadweight tonnage of 35,800 LT and a cargo capacity of 255,000 bbls. of petroleum products. The new ATB, built at Pascagoula, Miss.-based VT

YARDS TRUST BRUNVOLL A complex ship. A sophisticated thruster system. A tight installation schedule. No margin for delay. We know how it is – in Finland, Germany, France, Korea or China. With our specialized in-house expertise and years of experience, we have built up a reputation for preparing the units on time, precisely according to the specifications.

TRUSTED WORLD WIDE TUNNEL THRUSTERS

AZIMUTH THRUSTERS

LOWNOISE THRUSTERS

BRUNVOLL BRUNVOLL AS

6415 MOLDE

www.brunvoll.no

WB_BoatBuilding_LINO.indd 86

NORWAY

BRUCON THRUSTER CONTROL SYSTEMS

Booth 1819

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:42 PM

Innovative Workboat Solutions HVAC, Refrigeration, Sanitation, Watermakers & Ventilation

DS 1,000-H O EE

Broadest selection of HVAC products Customized HVAC solutions Advanced sanitation systems Fully automatic watermakers Remote monitoring via Smart Phone Largest global marine service network Over 50 years of custom engineering

EX C

n n n n n n n

S LT - S P R AY T E

Air-Cooled Condensers & Chillers

Custom High-Capacity Titan Chillers

CX Reverse-Osmosis Watermakers

n Designed for deck mount

n Titanium condensers resist corrosion

n Up to 20,000 GPD capacity

n Withstands harsh marine elements

n Up to 2.88 million BTUs

n Commercial-duty aluminum frame

n High efficiency

n Modular, multi-stage & tube-in-shell

n 316SS boost pump

Ship-Wide Ventilation Systems

Stainless-Steel Drawer Refrigerators

RushFlushâ&#x201E;˘ Toilet System

n Controls

n 47-liter capacity

n Dual water-jet technology

n Dampers & fans

n Stainless-steel wrapped door

n Fast installation

n Mist eliminators

n Removable freezer compartment

n Full-sized seat

FREE Video & Workboat Success Stories Special Report www.dometic.com/wb16 For more information please call 954-973-2477

Visit Us at International Workboat Show Booth #3727 from Nov. 30-Dec. 2, 2016

ISO 9001:2008

3136-Dometic-FullPg-ad-Workboat-2016-R2.indd 1 WB_FULLS.indd 87

10/24/16 10/25/16 8:55 3:03 AM PM

2016 BOATBUILDING REVIEW Halter Marine, is hauling product for ExxonMobil’s marine affiliate, Houston-based SeaRiver Maritime, a frequent charterer of Bouchard’s equipment. The B. No. 272 features three John Deere-powered 300-kW main generators and a 90-kW John Deerepowered auxiliary unit. There are twin ballast water treatment systems from Hyde Guardian and fire detection and fire extinguishing systems from Hiller. The 10,000-hp Donna J. Bouchard ATB tug is equipped with an Intercon coupler system. With a 25' draft, the new tug’s main propulsion comes from two EMD 20-170-G7C, Tier 3 diesel engines, producing a total of 10,000 hp. Ship’s service power is the responsibility of three 200-kw gensets powered by John Deere 6090AFM75 marine generator drive engines and a 150-kW auxiliary genset powered by a Deere 6068AFM85 marine generator drive engine.

Booth 2951

CORP

S S URVEY BOA T

All American Marine

Credit: All Am erican Marine

n February, All American Marine began construction on a custom hydrofoil supported aluminum catamaran survey boat for the U.S. Army Corps of Engineers Philadelphia District. The Bellingham, Wash., boatyard is sched-

uled to deliver the 68'×26' survey boat in early 2017. It will conduct surveys and some dive operations in support of dredging work. Teknicraft Design, Auckland, New Zealand, designed the 68-footer and another survey boat that All American recently built, the 62'×24' Florida II for the Corps’ Jacksonville (Fla.) District. The new 68-footer will have a top speed of 28 knots, powered by a pair of Caterpillar C18s putting out a total of 1,001 hp. The collection of survey data takes place in both the upper and lower deckhouses. Up top, a member of the survey team uses computers to work with the captain so the boat stays on a course necessary to collect the required data. Down below in the lower deck house, that data is processed on different sets of computers. Power to operate the computers and monitoring devices will come from a pair of Northern Lights C40M.3 40kW generators located in each hull.

static sampling Type II Marine Sanitation Device U.S.Coast Guard Certified I.M.O. Certified

Large volume sampler for barges & ATB’s. The HERMetic Sampler GT4 is

• Constructed of HD High Density Polyethylene • Lightweight • 4,12, 16 & 32 Person Systems • Corrosion Free • Maintenance Free • Simple Installation • Operates as a Biological Aerobic Sewage Treatment, Eliminating Foul Odors • Conforms to the Clean Water Act

dedicated for closed sampling of liquids and where large volume of liquid is needed. Its gas tight construction avoids a pressure release from the tank and exposure to fumes during operation resulting in increased safety and efficiency.

1-606-561-4697

Booth 428

WB_BoatBuilding_LINO.indd 88

www.envmar.com

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:44 PM

Booth 2027

ECDIS

Electronic Chart Display

and Information System

Finally, an ECDIS designed for navigators by navigators! • 100% Furuno designed Linux software improves stability & reduces virus risk • Fully compliant IMO systems (19” & 23.1” LCD) or Black Box ECDIS with user supplied wide glass bridge monitors are available • Simple Ethernet connection to FAR2xx7 Radars, saving thousands over complex interface kits • Fast redraw & intuitive route creation • Easy auto-load function greatly simplifies chart loading & updating • USB Jump Drive on keyboard supports easy data import & export

FMD3200/3300 ECDIS

• 10 custom user profiles allow quick recall of user preferences

FAR2x x

7 RADA

• Screen capture function stores up to 100 ECDIS/Radar images • Customizable conning screens are provided as standard supply • Extra DVI-I output port for convenient connection to Voyage Data Recorder

Four customizable conning displays are available as standard supply

EXCLUSIVE: World’s first IMO ECDIS that directly interfaces with Furuno’s FAR2xx7 Radar Series! For more information on the New Furuno ECDIS, scan QR Code.

WB_FULLS.indd 89

w w w.Fur uno U S A.c o m

10/25/16 3:03 PM

2016 BOATBUILDING REVIEW

PILOT BOA TS FOR OMAN Kvichak Marine Industries

Credit: K vichak Marine Industr ies

everal years of travel to and promotion in the Middle East is now bearing fruit for Seattle-based Kvichak Marine Industries, (now a Vigor

subsidiary). The first client is the Port of Duqm in Oman. The first products are a pair of 19-meter multipurpose pilot boats. Designed by Camarc in the U.K., the same firm that has provided designs for many Kvichak-built boats, the all-aluminum, deep-V, double-chine boats measure 62.3'×19.7' and are powered by pairs of Cummins QSK19 800-hp engines. But unlike most other Kvichak pilot boats, these boats don’t feature waterjet propulsion. The ZF 2000A transmissions turn 5-bladed nibral propellers. The new boats are also equipped with a Lamor skimming system and a small Palfinger knuckleboom crane. Its foremost function is as a pilot boat, but one of the Port of Duqm’s requirements was the ability to capture oil spills in the port. The port also required a deck crane for loading boom and other equipment or cargo. Because Oman can be very hot and dusty, the boats had to be outfit-

ted accordingly. The open deck and pilothouse are painted with light colors to reflect sunlight, the house is heavily insulated, the air conditioning is beefed up, and the windows are thicker with bonded glass to reduce UV light inside.

Z-DRI VE TO

WBO AT

Master Marine Inc.

Credit: Master Marine Inc.

Booth 4135

WB_BoatBuilding_LINO.indd 90

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:48 PM

FMG-16-274-WORKBOAT-DEC.indd 1 WB_FULLS.indd 91

10/21/16 10/25/16 12:19 3:03 PM PM

2016 BOATBUILDING REVIEW

aster Marine Inc., Bayou La Batre, Ala., delivered the 78'×34'11" Z-drive towboat St. Phillip to Marquette Transportation Co.’s Gulf Inland Division in Harahan, La. Designed by Kenner, La.-based Entech Designs LLC, the new towboat is fitted with two Patterson 40-ton deck winches supplied by Donovan Marine, New Orleans, to secure barge tows. Main propulsion comes from a pair of Caterpillar C32, Tier 3, diesel engines, producing 1,000 hp at 1,800 rpm each, connected to ZF AT 5111WM-FP Z-drives. The propulsion package gives the St. Phillip a running speed of 10 knots. The Cats were supplied by Thompson Power Systems, Mobile, Ala. Tankage for the new towboat includes 24,000 gals. of fuel and 6,550 gals. potable water. Ship’s service power is the responsibility of twin John Deere 4045AFM85, Tier 3, generator drive engines, each powering an 80-kW generator. Kennedy En-

gine, Biloxi, Miss., provided the Deere engines. Cooling for all engines and Zdrives came from Eastpark Radiator’s Duraweld keel coolers. The towboat’s doors and windows were supplied by Dale’s Welding & Fabrication LLC, and rubber bumper systems are from Schuyler Companies. New World Electronics supplied the electronics suite and Rio Marine handled the alarms and monitoring systems.

DOU

BLE -ENDE R FERRI ES Vigor Industrial

Credit: Washingt on State F erries

fter five years of begging the state for funding, Washington State Ferries finally got the money for four new 362'3"×83'2"×18' (144-car/1,500 passengers), 4,384 LT displacement ferries. The first Olympic-class ferry, the Tokitae, went into service in mid2014, followed by the Samish in April 2015. The third medium-capacity ferry, the Chimacum, is under construction and is scheduled for delivery in July 2017. The fourth ferry will be delivered and put in operation in 2018. The total budget for the four ferries is $515.5 million. The Tokitae cost $144 mil-

More Than 50 Years of Boat Building Experience!

Yank Marine, Inc.

Yank Marine Services, LLC

Mosquito Landing Road Tuckahoe, NJ 08250 Phone: 609-628-2928 75 ton Marine Travelift • 200 ton Marine Travelift • 300 ton Marine Travelift • 600 ton Marine Railway

487 Main Street Dorchester, NJ 08316 Phone: 856-785-0100 50 ton Marine Travelift

www.yankmarine.com

WB_BoatBuilding_LINO.indd 92

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:47 PM

MAGNOLIA MARINE TRANSPORTATION relies on the HALEY Complete Propulsion Packages; HRV-2411 Marine Reduction Gear Units, HRC Torsional Vibration Damping Couplings, and Shaft Break Packages. Five Motor Vessels to be built between 2011-2015

Booth 2221

2015 Marine Transportation and Marine Dredges re rely on HALEY Complete Propulsion Packages; Marine Reduction Gear Units, HRC Torsional Vibration Damping Couplings, and Shaft Brake Packages.

Marine Gears, Inc. Haley Clutch & Coupling, Inc. 1690 Hwy 1 North, P.O. Box 689 Greenville, Ms, 38702 Tel: (662) 332-8716 Fax: (662) 3354322 Toll Free: 1-877-903-2158 sales@haleyinc.com

WB_FULLS.indd 93

www.haleyinc.com

Marine Gears International, Inc. 2304 Engineers Road, Suite-D Belle Chasse, La, 70037 Tel: (504) 361-7747 Fax: (504) 393-5461 Toll Free: 1-800-227-9198 mgii@mindspring.com

10/25/16 3:03 PM

2016 BOATBUILDING REVIEW lion, the Salish was $126.5 million, the Chimacum will be $123 million, and the fourth boat will cost an estimated $122 million. Main propulsion for the ferries comes from two EMD 12-710G7C Tier 3 diesels, producing 3,000 hp each. The mains are connected to Rolls-Royce, 4-bladed, 138" stainless steel, controllable pitch props through Falk 44x14DMH2S marine gears with 4.986:1 reduction ratios. For the Tokitae, the Samish and the Chimacum, the hulls were built by Vigor at its Seattle shipyard and the superstructures were built by Nichols Brothers Boat Builders on nearby Whidbey Island and barged to Harbor Island.

MA Y 2016 SUBCHA PTER M TOWBOAT

WB_BoatBuilding_LINO.indd 94

Horizon Shipbuilding

Credit: R ichard Dollison

n early 2016, Horizon Shipbuilding, Bayou La Batre, Ala., delivered the 95'×43'×10' Z-drive towboat Dan Reeves to the Corps of Engineers Little Rock (Ark.) District. The towboat is designed to meet the new Coast Guard Subchapter M requirements. The Dan Reeves, which has accommodations for eight crew, is designed for maintenance and repair activities on the McClellanKerr Arkansas River Navigation System. The Corps had the opportunity

early in the project to tour and ride a Southern Towing Z-drive towboat. This allowed the Corps team to experience the full capabilities of Z-drive propulsion, gain a better understanding for design and operational considerations, and contribute directly to the decision to build a Z-drive towboat. Main propulsion comes from twin Caterpillar C32 WOSR “C” rated diesel engines, producing 1,300 hp at 1,800 to 2,100 rpm, connected to two Thrustmaster TM1500MZ Z-drives with reduction ratios of 5.74:1. The Z-drives turn Hung Shen 4-bladed 67.75" props in nozzles. The Z-drive system has environmentally acceptable lubricants inside and the boat has the capability to operate as a zero discharge vessel. With a draft of 8'6" and an air draft of 47'10", the Dan Reeves has a displacement of 657 LT. Capacities include 22,800 gals. of fuel; 7,500 gals. potable water; and 19,400 gals. ballast.

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:49 PM

Performance and reliability for your heaviest loads.

400 C

From 150-ton fishing vessels to 1,200-ton tugs or barges, performance and reliability are crucial to hoist and move every vessel around your yard. With over 50 years of experience and nearly 4,000 units worldwide, Marine Travelift continues to deliver the hard-working solutions your business needs to complete every job. Count on the most durable machines, designed and built by our industry experts to meet or exceed the demands of your yard. marinetravelift.com +1.920.743.6202 / sales@marinetravelift.com

Booth 2051 ÂŠ2015 Marine Travelift

WB_FULLS.indd 95 17825_MarineTrvlLift_WorkboatAd.indd 1

10/25/16 3:04 PM 10/16/15 8:14 AM

2016 BOATBUILDING REVIEW

TWIN-SCREW TOWBOAT Verret Shipyard

Credit: B lessey M arine Services

he relationship between boatbuilder Verret Shipyard and boat owner Blessey Marine Services, Harahan, La., is a strong one. The Plaquemine, La.-based shipyard in late February delivered the 70'×30'×10'8" twin-screw towboat Capt. Troy Green to the Harahan, La.-based inland tank

barge company. Sporting a draft of 8'6", the new 185-GRT towboat is powered by twin Cummins QSK19 diesel engines, producing 660 hp at 1,800 rpm each. The engines turn Kahlenberg 4-bladed stainless steel 74"×58" wheels through Reintjes WAF-374 marine gears with 7.1:1 reduction ratios. Capacities include 20,000 gals. of fuel and approximately 14,800 gals. potable water. Ship’s service power comes from two Cummins QSB7-DM gensets, sparking 85 kW of electrical power each. The wheelhouse has an air draft of 49'11" (mast up) and 43'11" (mast down), an eye level of 33'6", and a custom hydraulic dual electrohydraulic full follow up/non follow up steering system. The electronics suite features two Furuno radar, AIS, GPS, depth sounder, SAT compass, intercom/ PA, weather station, three Icom VHS and a DeHart swingmeter. On deck are two Patterson 40-ton electric winches. Ancillary equipment includes a Blue

MARINE AUTOMATION & CONTROL SYSTEMS

RETROFIT SYSTEM DESIGN & INSTALLATION AUTOMATION INTEGRATION  ALARM & MONITORING SYSTEMS  MECHANICAL & ELECTRICAL DESIGN  

Box voyage recording system, twin 500-watt Carlisle & Finch remote control xenon spotlights, and an Eagle fire detection system.

TRIPLE-SCREW TOWBO AT Rodriguez Boat Builders

Credit: R odriguez

Boat Bui lders

oden, Ala.-based Rodriguez Boat Builders completed a new

TANK LEVEL INDICATORS — DRAFT MONITORING

    

Works in all Fluids, Fuels, Ballast, Lube Networkable & Programmable Multiple High & Low Alarms Made for odd shaped tanks ABS Type Approved

Booth 3927

P. 503-285-8947

www.tms-usa.com

www.levelcom.net

R E TR O E AS Y A TE A C CU R

FIT !!

D A BL E D EP EN NA N C E A IN TE L OW M TIV E EF FEC CO S T

Made in USA

E: info@tms-usa.com

Your one-stop source:

Booth 1005

Philadelphia, PA 800-523-3340

Mobile, AL 800-277-6778

Jacksonville, FL 800-277-8280

New Orleans, LA 800-277-6945

» Blast and Prime » Hi-Def Plasma » Laser Plate Burning up to 1-1/8” » 1500-Ton, 45-Foot Pacific Press » Structural Blast » Structural Tees » AH36 Structural Inventory

www.metalsusa.com 96

WB_BoatBuilding_LINO.indd 96

www.workboat.com • DECEMBER 2016 • WorkBoat

11/8/16 11:13 AM

History.

Service. Innovation.

Carboline has been making high performance coatings and linings for 70 years. As shown in this picture from our archives, circa 1960, we have a long history in the marine industry. Our comprehensive line of zinc primers, epoxy anticorrosives, topcoats, IMO-approved ballast tank linings, and antifoulings provide a long service life. Our proven performance in this industry means you can trust that we have the right solutions for your project.

Booth 1300

WB_FULLS.indd 97

www.carboline.com

10/25/16 3:04 PM

2016 BOATBUILDING REVIEW 70'×30' triple-screw, shallow-draft towboat in March for Mid-River Terminals, Osceola, Ark. Designed by Joey Rodriguez, the 2,000-hp Dianna Lynn is a new design that features a conventional forward-house pusher configuration and the same propulsion package as Rodriguez’s popular lugger tugs. The lugger tugs feature an aft mounted deckhouse and a forward deck space for cargo. A single aftmounted drum towing winch allows for towing or pushing if rigged with blocks. For propulsion, there’s three in line, 660-hp 6-cylinder Cummins QSK19 engines. Each engine turns a 66" stainless steel propeller through ZF gears with 6:1 reduction ratios. The towboat has an 8' operating draft, and will be primarily involved in fleeting and harbor work. The Dianna Lynn is the fourth boat in Mid-River’s fleet. The wheelhouse has a full 360° view with large windows and is set atop two

accommodation decks and a half deck that also serves for bridge electronics support, giving the towboat a 31' eyelevel. Steering and flanking rudders are controlled by wheelhouse levers with mechanical shafts through the houses and connected to the hydraulic actuator valves in the upper engine room. A set of push knees and deck winches facilitates barge work.

CALIFORN IA LANDING CRA FT Diversified Marin

Credit: Avalon F reight Services

n March, the 150'×50' Catalina Provider was delivered to Avalon Freight Services (AFS), San Pedro, Calif. Built by Diversified Marine, Portland, Ore., the landing craft has 15'9" of clearance between the wheelhouse and the deck, enough room to fit the cabs of two trucks and part of their 40-foot containers. Up at the bow, the barge’s landing ramp, jutting up perpendicular to the water, is as tall as the wheelhouse. Besides the two trucks and their containers, the Catalina Provider will hold four more rigs of

Maritime Innovations for the 21st Century™ Gibbs & Cox’s nearly nine-decade legacy is built on our dedication to quality, performance, safety, and customized solutions balanced to meet our customers needs. • We invest in people, technology, training and tools. • We provide vessel designs focused on producibility, optimized to the individual shipyard. • We are a top U.S. firm leveraging our design resource depth, schedule performance, and first-time quality. To learn more about how you can build a future with us as a Naval Architect or Marine Engineer. Visit www. GibbsCox.com. Gibbs & Cox is an equal opportunity employer. M/F/D/V. Visit us on Facebook, Twitter and LinkedIn.

Booth 644

Email: info@gibbscox.com; Phone: (703) 416-3600 Fax: (703) 416-3679

WB_BoatBuilding_LINO.indd 98

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:51 PM

Booth 2501

WB_FULLS.indd 99

10/25/16 3:04 PM

2016 BOATBUILDING REVIEW the same size on the 4"-thick concrete wear deck, with space left over for smaller loads, as well as 12 passengers. The new landing craft was designed by Columbia-Sentinel Engineers in Seattle for AFS, a partnership between Seattle-based Harley Marine and Catalina Express, Long Beach, Calif. “Whatever makes [Catalina] island operate,” food, new furniture, etc., is transported by the Catalina Provider, said Kurt Redd, CEO at Diversified Marine. “Whatever goes out on the island, it will take it.” Triple 670-hp Caterpillar C18 DITAs are matched up with Twin Disc MGX-5170 marine gears with 5.03:1 ratios to power the landing craft, which hit 10 knots during sea trials. The boat’s electrical power comes from a 99-kW John Deere-powered genset. The Catalina Provider is the third landing craft of this size that Diversified has built.

J UNE 2016 INLAND TOUR BOA T Rozema Boat Works

Credit: R oz em a Boat Works

or over 80 years, Seattle City Light, the electrical provider for the city of Seattle, has offered boat tours on the scenic glacier-fed Diablo

TOW GEAR YOU CAN COUNT ON!

MODUTECH MARINE, INC New Construction to 100’ n Commercial n Work n Charter Boats Com ple te li ne of Alu minum an d Fiberglass

Lake, a City Light reservoir in the North Cascades Mountains. This spring a new boat started taking passengers on the three-plus-hour ride. It’s the Alice Ross IV built by Rozema Boat Works, Mount Vernon, Wash., and delivered to Seattle City Light on March 29. The aluminum 55'×16' Alice Ross IV is a Rozema design that was based on one of the boatyard’s previous 50 footers. However, it was totally redesigned. It’s the first inland tour boat Rozema has built. The focal point of the design is the cabin with large vertical windows along the sides and smaller windows in the roof. There’s seating in the cabin for 47 passengers, but outside, the large aft deck has seating and plenty of standing room for all-around viewing There’s usually a two-man crew, the captain at the control station at the front of the cabin and a park ranger who explains the history of the area and what the passengers are seeing

Booth 1963

Booth 1420

Pat rol Boat s

Our famous MARQUIP line brings you the very best in tow plates, shackles, connecting links, and associated gear you need to work the tough jobs, day in and day out. When your reputation’s on the line, make sure our gear’s on your boat. All Alu minum 95' Ran ge Suppor t Cr aft

2 5 3-2 7 2 -9 319 2218 MARINE VIEW DRIVE, TACO MA, WA 98422

WWW.MODUTECHMARINE.COM 100

WB_BoatBuilding_LINO.indd 100

CUSTOMER SERVICE 24 HOURS A DAY, 7 DAYS A WEEK

Visit our website for more: www.wachain.com ASK FOR OUR FREE CATALOG

1-866-WACHAIN WASHINGTON CHAIN AND SUPPLY, INC.

P.O. Box 3645 • 2901 Utah Avenue South Seattle, Washington 98124 USA FAX (206) 621-9834 • E-mail: info@wachain.com

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:52 PM

Flexible Coupling for Work Boats VULKARDAN F

Torque Range: 8.20 kNm – 16.25 kNm •

Lowest weight for easiest handling

•

Softest execution for the best system tuning

•

Highest power loss for the best solution

ork Boat International W ns Show in New Orlea Booth 3817 American VULKAN Corporation 2525 Dundee Road | Winter Haven | FL – 33884 | Phone +1 863 324 2424 | info@vulkanusa.com

AVC I AD 11.125" w x 14.25" h_2016-10-25.indd 1 WB_FULLS.indd 101

25.10.16 10/25/16 3:04 PM

16:05

2016 BOATBUILDING REVIEW

TEXAS P ILOT BOA T Gladding-Hearn Shipbuilding

Credit: G ladding -H earn Shipbui lding

ladding-Hearn Shipbuilding, Somerset, Mass., recently delivered the 53'6"×17'8"×8'6" all aluminum deep V monohull pilot boat Port Arthur to the Sabine Pilots in Groves, Texas. Designed by New Bedford, Mass.based C. Raymond Hunt Associates, the new boat has a 4.8' draft, features wide side decks, side and rear doors, and boarding platforms on the roof and bow. At the transom are throttle and steering controls and a winch-operated hinged rescue basket, level with the rescue access. Main propulsion comes

from double Caterpillar C-18 diesels, each rated at 715 hp at 2,100 rpm. Loaded top speed is 28 knots. The engines turn 5-bladed nibral propellers via Twin Disc MGX-5135A Quick Shift gearboxes. A Humphree Interceptor trim tab system with automatic trim control was installed at the transom. The hydraulic steering system is by Seastar. The Port Arthur’s running speed is 28 knots. The Cat C-18 has become a go-to engine for this size boat. The vessel is equipped with a 12kW Alaska Diesel genset. Capacities include 850 gals. of fuel and 55 gals. fresh water. The boat has a crew of two — captain and deckhand. The wheelhouse is cooled by two 16,000Btu air conditioners. A third, 12,000Btu unit is in the forecastle. Interior accommodations include eight Llebroc seats, head, small galley, and two settee berths forward.

OUT HERE, THERE’S NO SUBSTITUTE FOR EXPERTISE. Booth 2411

Our commitment to your success starts with every engine we build, and continues with our Factory Certified Technician program. By building one of the industry’s largest teams of technicians, and a nationwide network of service centers, you get the maintenance expertise and performance that can come only from the very people who built your engine. We train to a higher standard because we’re driven to serve you better. FACTORY CERTIFIED TECHNICIAN

Booth 3213

USS NY (U.S. Navy photo by Mass Communication Specialist 1st Class Shawn D. Graham/Released)

with the aid of a remote mike and PA system. The Alice Ross IV is rated for 12 knots with a full load though it typically cruises at 10 knots. Power comes from a pair of 500-hp John Deere 6090 diesels turning Hamilton Jet HJ 364 waterjets through ZF 305 gears. There’s also a 25-kW Northern Lights generator, along with a Dometic heat and air conditioning system that’s housed behind a false ceiling in the middle of the cabin.

Marin e

FAIRBANKSMORSE FAIRBANKSMORSE

Learn more at www.fairbanksmorse.com

102

WB_BoatBuilding_LINO.indd 102

www.workboat.com • DECEMBER 2016 • WorkBoat

11/1/16 9:45 AM

Inbox

Urgent: Thruster gear oil needs replacing. ETA 1900 hrs, Gulfport. OK?!

We make it possible Our strong local presence across the Gulf of Mexico means that weâ&#x20AC;&#x2122;re always close. Full range of VGP compliant lubricants from bow to stern for offshore supply vessels. Visit us at www.totallubmarine.com

WB_FULLS.indd 103

10/25/16 3:04 PM

2016 BOATBUILDING REVIEW

REFU RBI SHED MODE L BO W TUGS Main Iron Works

Credit: Next Gener

ation Marine

ouma, La.-based Main Iron Works recently delivered two refurbished model bow tugs to New Orleans-based Next Generation Marine. The new minority-owned tug company bought the two tugs from Crosby Tugs, also of Houma, and had them morphed

into the 118'×32'×16' tug Compass Dominator and the 115'×28'×14' tug Compass Stallion. The tugs can handle offshore towing, ship docking, rig mobilization and demobilization, and marine construction. The Compass Dominator is powered by twin Alco 12-251 diesels, producing 4,200 hp at 1,600 rpm each. The marine engines are connected to 102"×114", 4-bladed wheels through Reintjes marine gears with 5:1 reduction ratios. The propulsion package gives the tug a running speed of 13.5 knots and a bollard pull of 65.31 short tons. Two Caterpillar 3516 diesel engines, developing 3,000 hp at 1,600 rpm each, power the Compass Stallion. The Cats connect to 102"×114", 4-bladed propellers through Western marine gears with 6:1 reduction ratios. The package gives the boat a running speed of 13 knots and a bollard pull of 47 short tons.

WE MAKE GETTING YOUR BOAT FIXED EASY!

Authorized Dealers for Now with two locations!

• 24/7 Parts, Sales, Service, Repairs • Factory trained technicians for most engine, gear, generator and electronic control manufacturers (MTU, Detroit, CAT) • Rebuild, repowers, refit • Diagnostic and maintenance • Experienced techs with international marine experience

Contact u s t oday! 2 81-535-0200 www.elitedieselservice.com 104

WB_BoatBuilding_LINO.indd 104

CREW

TRANSFER VES SEL

Blount Boats

Credit: Blou nt Boats

he offshore wind energy crewboat Atlantic Pioneer pirouettes with grace, turning tight figure eights with ease as its twin waterjets pump the equivalent volume of an Olympic-sized swimming pool in 10 seconds. After skimming out at 24 to 25 knots

The Peace of Mind You Need. The Support You Deserve. Your designs need to come to life quickly to start genera�ng revenue. IDC’s deep understanding of system dynamics, coupled with expert customer service, will insure component compa�bility — so you can focus on your goals. Let Us Support All of Your Marine Engineering Needs:



Torsional Vibra�on Analysis



Whirling Calcula�ons



Lateral / Axial Analysis



On‐Site Vibra�on Tes�ng



3D Modeling / CAD



Custom Engineering Solu�ons www.idc-tech.com

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:53 PM

MPTDiversified1016_Layout 1 10/17/16 2:29 PM Page 1

MPT. SERIOUSLY S.M.A.R.T. ONE SCHOOL. UNLIMITED POSSIBILITIES.

There is nothing like incredibly-real training to better prepare you for serious real-life maritime situations. Our ongoing investment in S.M.A.R.T. simulation provides a visually immersive level of realism that is simply not available in other programs. This is just another reason why MPT is the most complete full-service private maritime training school in the country. OUR UP-TO-THE-MINUTE, INDUSTRY-LEADING TRAINING INCLUDES: • Dynamic Positioning (DP) – State-of-the-art DP lab offers fully integrated hardware training • ECDIS hardware – real-world training on real-world equipment • Over 170 Approved Courses that meet or exceed the IMO Standards • Gap Closing training for Engineers and Deck officers

For training that can create serious real-life opportunities, call us or visit MPTusa.com today.

Sea The World

USCG | MCA | NAUTICAL INSTITUTE | MARSHALL ISLANDS 9 5 4 . 5 2 5 .1 0 1 4

WB_FULLS.indd 105

1 9 1 5 S o u t h A n d r e w s Av e n u e , F o r t L a u d e r d a l e , F L 3 3 3 1 6

mptusa.com

10/25/16 3:04 PM

2016 BOATBUILDING REVIEW to Deepwater Wind’s 30-megawatt offshore wind energy project at Block Island, R.I., that maneuverability allows the 70'6"×24'×4' aluminum catamaran to move easily among five turbine towers that will exceed 500' in height. The Atlantic Pioneer is the first U.S.-flag crew transfer vessel (CTV) engineered specifically to service offshore wind turbines. Power is provided by twin 1,400-hp Tier 3 MAN D2862 LE466 engines. The CTV’s MAN engines turn Hamilton HM571 waterjets through ZF 3050 marine gears. Trim is adjusted with two Humphree Interceptors. On deck, a Palfinger PK6500M knucle-boom crane handles up to 12 tons of cargo on the forward deck, with room for another three tons aft. The $4 million boat was built at Blount Boats, Warren, R.I.

J UL Y 2016

5,300-HP A TB T UG Fincantieri Bay Shipbuilding

Credit: Fi ncantieri Bay Shipbu ilding

incantieri Bay Shipbuilding (FBS), Sturgeon Bay, Wis., delivered an articulated tug-barge unit (ATB), the 5,300-hp Barbara Carol Ann Moran and the 110,000-bbl.

Booth 852

chemical barge Louisiana, to Moran Towing Corp., New Canaan, Conn., in mid-May. The 123'×36'×18' ATB tug is powered by a pair of EMD 12-710G7C-T3 diesels that produce 2,650 hp each at 800 rpm. The engines turn a pair of HS Marine Propulsion ADV Series 115"×91.22", stainless steel, 5-bladed props through Lufkin RHS2500HG marine gears with 3.963:1 reduction ratios. The design towing speed is 10 knots. The tug has a bollard pull of 53.7 MT. For service power, there’s a pair of John Deere gensets rated at 200 kW each. Capacities on the Barbara Carol Ann Moran include 138,000 gals. of fuel, 16,000 gals. water, 68,000 gals. ballast and 2,500 gals. engine lube oil. The ABS-classed 468'×78'×34' barge Louisiana has a draft of approximately 26'6". The new ATB unit was delivered in May 16. This is the third delivery to Moran under a 2014 contract.

SPECIALTY WINCHES FOR THE MARINE AND FISHING INDUSTRY

W I N C H E S

DESIGNED FOR OUTSTANDING

PERFORMANCE &

SAFETY

BLOOM MANUFACTURING, INC. Custom Engineered Solutions Since 1910

Independence, IA 50644, USA | bloommfg.com P: 319-827-1139 | 800-394-1139 F: 319-827-1140

106

WB_BoatBuilding_LINO.indd 106

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:53 PM

Booth 1058

Introducing the new TracVision TV-series ®

The best just got even better. Sophisticated technology for hundreds of channels of crystal-clear HDTV Ultra-fast satellite acquisition High performance tracking even in heavy seas

Simple to install and easy to use Sleek IP-enabled TV-Hub delivers easy setup and operation Friendly user interface from any mobile device or laptop

Call Sea-Trac at 504-737-0591 to speak with the experts SALES, SERVICE, CUSTOM INSTALLATIONS, AND MORE Sea-Trac Offshore Services 114 Hickory Avenue, New Orleans, LA 70123 (504) 737-0591 www.seatracoffshore.com ©2014 KVH Industries, Inc. KVH, TracVision, and the unique light-colored dome with dark contrasting baseplate are registered trademarks of KVH Industries, Inc.

14_TVseries_Comm_SEATRAC.indd 1 WB_FULLS.indd 107

9/25/14 3:04 1:19PM PM 10/25/16

2016 BOATBUILDING REVIEW

ALASKA TU

Hanson Boat Co.

Credit: R ussell S hrewsbur y

he Gretchen Dunlap is the newest addition to Dunlap Towing Co., LaConner, Wash. On May 17 a reception was held for the 101'×42'×20'6" escort tug at Dunlap’s dock in Everett, Wash. After, the new tug steamed

north, through Alaska’s Unimak Pass into the Bering Sea and then down the Aleutian chain to Dutch Harbor, which will be her primary location. Designed by Hockema & Whalen Associates in Seattle and built by Hansen Boat Co. in Everett, the Gretchen Dunlap will join another Dunlap tug, the James Dunlap, in Dutch Harbor. For propulsion, the Gretchen Dunlap’s two Caterpillar 3516C diesels put out 6,772 hp. For escort work there’s a Markey DEPCH-52 hawser winch on the bow and for towing a Markey TES-40 winch on the stern. Both are electric winches. The Gretchen Dunlap also has a plumb bow with fendering down to the waterline to easily push the stern of a barge. At the stern, the scantlings are heavier to support the larger Z-drive units, a pair of Rolls-Royce 255 P30 FPs, and reduce vibration.

NEW JERS EY RES EA RCH VES SEL SW Boatworks

Credit: Stockton U niversity

he new flagship vessel of Stockton University’s marine science field station near Atlantic City, N.J., has been busy this year carrying students and deploying side-scan sonars to chart everything from derelict crab traps to

Booth 2554

On March 21, 1941 Maine Maritime Academy was founded by an Act of the 90th Maine State Legislature. In October of that year, the doors opened with 29 students who, in the words of Senator Ralph Leavitt, one of the college’s founders, “…came to nothing but an idea, instead of a school, and not only stayed, but sweated blood to breathe life into the institution. They were pioneers in the true sense of the word.” Over the past 75 years, nearly 10,000 alumni have become engineers, navigators, scientists, and businesspeople all over the world. We are proud of our history, and proud of the people who built Maine Maritime Academy into what it is today. mainemaritime.edu

108

WB_BoatBuilding_LINO.indd 108

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:54 PM

WB_FULLS.indd 109

10/25/16 3:05 PM

2016 BOATBUILDING REVIEW 19th-century shipwrecks. The beamy Calvin Beal Jr.-designed 36'×14'×4' fiberglass research vessel Petrel was built at SW Boatworks, Lamoine, Maine. Maine Marine Patrol christened its 38'9"×15' patrol vessel Dirigo II from SW Boatworks in January 2014, but Stockton University was the boatyard’s first customer for a research vessel. Propulsion comes from a Cummins QSC 8.3 diesel developing 550 hp at 3,000 rpm. The engine turns a 27"×35"×2.25", 4-bladed wheel from S&S Propeller through a ZF 286A marine gear with a 2.5:1 reduction ratio. Steering is with Glendenning electronic controls, including a trolling valve. The combination gives the boat a service speed of 18 to 19 knots. The boat has tankage for 400 gals. of fuel. A Westerbeke 10-kW generator provides ship’s service power.

A UGS

T 2016 COA

STAL INTE RCEP TOR VES SEL Safe Boats International

Credit: Safe Boats International

IV? Perhaps it’s an anagram? In this case, it refers to coastal interceptor vessel. It’s a model category created by SAFE Boats International, Bremerton, Wash., specifically for the U.S. Customs and Border Protection (CBP), Air and Marine Operations (AMO). The Interceptor line includes the new CBP boat as well as the multimission interceptor (MMI), which was introduced at MACC last month. Both are outboard-powered, open-deck, T-top speedsters built for open-water operations, both military and law enforcement. The CIV measures 41'×12' and is powered by four 300-hp Mercury Verado outboards. Top speed is said to be 54-plus knots and cruising speed is 36-plus knots. The boats, of which CBP wants up to 52 (worth $48 million), have shock-mitigating seats (SHOXS) for nine with a load capacity of 22,644 lbs. The range at cruising speed is over 350 nautical miles. The

HIGH PERFORMANCE THERMAL INSULATION FOR HIGH PERFORMANCE MARINE VESSELS

SHEET METAL, FOIL ENCAPSULATED, INTEGRAL - WE’VE GOT THE SOLUTION

INSULATION EXPERTS 951-736-9911 | www.thermalstructures.com | sales@thermalstructures.com 2362 Railroad St. Corona, CA 92880 | 2800 Airwest Blvd. Plainfield, IN 46168 (Mid-West Division)

110

WB_BoatBuilding_LINO.indd 110

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:55 PM

Booth 1027

WB_FULLS.indd 111

10/25/16 3:05 PM

2016 BOATBUILDING REVIEW lightship weight is 16,609 lbs. The CIV and the MMI trace their lineage back to the 38 Apostle, which was introduced at MACC in 2009 and features a stepped bottom for higher speeds.

CALIFORNI FIREBOA

A T

Foss Maritime Co.

Credit: F oss Maritim e Co.

he 108'×35' fireboat Protector, built by Foss Maritime Co. at its Foss Seattle Shipyard, was recently delivered to the Port of Long Beach, Calif. Along with a sister vessel — Vigilance — now under construction, the Protector represents a 400% increase in firefighting power over the port’s existing fireboats. The fireboat has 10 water cannons with a capacity to pump more than 41,000 gpm, or four times the output of the old fireboats. Pumping range is 600' and higher than a 20-story building — enough power to project water or foam anywhere aboard the world’s largest containerships and oil tankers. The multimission design by Robert Allan Ltd., Vancouver, British Columbia, has the capability to protect its crew and operate amid chemical, biological, radiological and nuclear threats. Propulsion on the new boats comes from a pair of Caterpillar 3512C main engines, combining for 2,012 hp, that

C.N.C. Machined Propeller Shafting, Custom Machined Shaft Couplings, Duramax Strut Bearings, Struts, Rudders, Michigan Wheel Propellers

turn Voith Schneider propellers. This produces a top speed of 12 knots. The boats are designed for a low wake wash of less than 12" at 8 knots, and an onsite endurance of five days. The wheelhouses have both forward and aft control stations, where pilots can use low-speed maneuvering and zero-speed stationkeeping with the Voith Schneider propulsion system. Two more Caterpillar 3512C engines and one Cat C12 engine are harnessed with the drive engines to power seven firefighting pumps, ranging in size from 2,000 gpm to 8,000 gpm for the total aggregate capacity of 41,000 gpm.

BOU

CHA

RD A TB TUG

VT Halter Marine

Towing Pins OCIMF Roller Fairleads Guide Sheaves

Booth 3227

Shark Jaws

Balanced Head Fairleads

Smith Berger Marine, Inc.

7915 10th Ave. S., Seattle, WA 98108 USA Tel. 206.764.4650 - Toll Free 888.726.1688 - Fax 206.764.4653 E-mail: sales@smithberger.com - Web: www.smithberger.com

112

WB_BoatBuilding_LINO.indd 112

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:56 PM

Booth 450

Aluminium extrusions – made for marine & offshore Visit us at the International WorkBoat Show, New Orleans, LA Nov 30 – Dec 2, 2016, booth 450

Just one third the weight of steel, yet strong and highly corrosion resistant, aluminium is perfect for marine and offshore applications. It also saves precious time and money. By reducing weight, aluminium reduces transport costs. It also saves time – and therefore cost – in installation and decommissioning. Plus, low maintenance means even further savings. Aluminium specialist Sapa extrudes lightweight, sustainable components for practically any marine or offshore use. And now our latest alloy, the 5083 series, offer even greater structural strength.

To find out more, visit www.sapagroup.com/marine or email marine.extrusions@sapagroup.com

Photo courtesy of Fincantieri

WB_FULLS.indd Sapa marine advert113 8.125x10.875 Workboat.indd 1

10/25/16 PM 20/10/20163:05 14:44

2016 BOATBUILDING REVIEW

Credit: VT H alter Marine

T Halter Marine Inc. has delivered the 130'×38'×22' 6,000-hp, twin-screw tug Frederick E. Bouchard, to Bouchard Transportation Co. Inc., Melville, N.Y. The tug, which will be part of an articulated tug/barge unit, was built at VT Halter’s Pascagoula, Miss., shipyard. The delivery culminates a two-vessel contract awarded by Bouchard to Halter in August 2014. Main propulsion comes from twin EMD 12-710G7C-T3 engines, producing 3,000 hp at 900 rpm each. The

diesels turn 140"×94" 5-bladed wheels through Lufkin RS2800HG vertical offset marine gears with 4.9:1 reduction ratios. The propulsion package gives the tug a bollard pull of 83.44 short tons and a running speed of 14 knots. The Frederick E. Bouchard underwent sea trials on June 1. The first vessel in the contract, the Morton S. Bouchard Jr., was delivered to Bouchard on Feb. 1, and is currently in service in the coastwise trade. The new tug will also be joining Bouchard’s fleet servicing the coastwise trade. Both tugs are equipped with an Intercon coupler system. The tug features steering gear by Engine Monitor Inc., a Kongsberg K-Bridge navigation system and a Furuno electronics suite.

S EP T EMBER 2016

CATAMA RA N PASSENG ER VES SEL All American Marine

Credit: All Am erican Marine

n July, Harbor Breeze Cruises, Long Beach, Calif., took delivery of the La Espada, a 250-passenger 83'×29'6" aluminum catamaran. It is the second high-speed cat built for the company by All American Marine

Ad vertise i n RY FEB RU A

S EEK I NG C ORRES P OND ENT WorkBoat magazine/ WorkBoat.com is seeking a correspondent to report on the commercial marine industry in the Northwest. Previous commercial marine industry writing experience and familiarity with the Northwest workboat industry is a plus. Please send your resume and clips to: workboat@cox.net 114

WB_BoatBuilding_LINO.indd 114

2 017

Special Feature: Passenger Ve ssels Highlights: Cooling Sy stems Ad Closing: De c 9

2 017 MARC H Special Feature: Di esel En gines Highlights: Lighting Ad Closing: Jan 2 0

Susan Chesney Western United States, Canada, Far East & Pacific Rim 206-463-4819 schesney@divcom.com Jeff Powell Gulf / Southern U.S. South and Central America 207-842-5573 jpowell@divcom.com David Cohen Gulf / Southern U.S. South and Central America (207) 842-5496 dcohen@divcom.com Kristin Luke Eastern United States & Canada, Europe & Africa 207-842-5635 kluke@divcom.com Advertising Coordinator Wendy Jalbert 207-842-5616 wjalbert@divcom.com

CAL L TO DAY !

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:57 PM

Houston TX - Houma LA - Mobile AL - Laurel MS

Oilfield • Industrial • Marine 5809 Highway 311 Houma, Louisiana 70360 800-264-2380

WB_FULLS.indd 115

Inventory Available at WWW.COASTALELECTRIC.COM

10/25/16 3:05 PM

2016 BOATBUILDING REVIEW Inc., Bellingham, Wash. La Espada (“The Sword”) is a multipurpose vessel that offers harbor tours, whale watch and dinner cruises around Los Angeles and Long Beach harbors, and charter ferry service to Catalina Island. The vessel is powered by twin Caterpillar C32 ACERT Tier 3 engines that produce 1,450 hp at 2,100 rpm each. La Espada is a hydrofoil-supported catamaran, and fuel consumption per nautical mile is a nearly constant curve from 17 knots up to 27 knots. The fuel-efficient hull significantly reduces operating costs. The vessel boasts full load speeds up to 30 knots at 2,100 rpm. For passengers, there is stadium-style seating on the foredeck for unobstructed views in addition to comfortable interior and exterior seating with ADA accessibility throughout the cabin. There’s a snack bar in the main deck cabin and the upper deck features a premium cabin complete with a private bar.

PLATFORM SUPPLY V ES SEL BAE Southwest Shipyards

Credit: GulfM

deepwater and ultradeepwater market in the Gulf of Mexico.The MMC 887 300-class PSV is also built for maximum fuel economy. It is designed with hybrid propulsion and control systems, enabling the PSV to operate with variable power including two transit modes (high speed and green PTO/ PTI efficiency mode) and two DP-2 modes with additional redundancy. The propulsion package features two Caterpillar MaK 6M32C engines producing 3,000 kW (8,046 hp) total coupled to Scana CPP systems. Siemens shaft generators provide 4,000 kW to the 690v primary electrical systems, with two Caterpillar C18 auxiliary generators supplying an additional 1,100 kW. Thruster control systems are provided by three Berg fixed pitch electric thrusters, with 3,402 hp combined thrust, and a Rolls-Royce retractable bowthruster, diesel over hydraulic, driven by a Cat C32 engine producing 1,080 hp. In the transit mode, the vessel is capable of a service speed of 16.5 knots, running on both main engines and propellers.

OFFSHORE SERVICE V ES SEL Master Boat Builders

ark Am ericas

AE Southwest Shipyards, Mobile, Ala., has delivered the Hercules, a 288'×62'×26', DP-2 platform supply vessel, to GulfMark Americas, St. Rose, La. Designed by MMC Ship Design & Marine Consulting, Gdynia, Poland, Hercules will provide decommissioning, drilling support and well intervention services in the 116

WB_BoatBuilding_LINO.indd 116

rpm each. The Cats are connected to 82"×70", 5-bladed, bronze wheels through Twin Disc MGX-5600 marine gears with 5.04:1 reduction ratios. The propulsion package gives the new OSV a running speed of 11 knots fully loaded. For added maneuverability, the OSV has two Schottel SST-2FP 800hp bowthrusters and two SST-170FP 350-hp sternthrusters. The vessel is able to carry 8,000 cu. ft. of dry mud in four 2,000-cu.-ft. tanks. In addition to its dry mud capacity, the new OSV can carry 150,000 gals. of fuel and 6,000 bbls. of liquid mud. The rear cargo deck measures 155'×39' and can haul up to 2,216 LT of freight. Ship’s service power comes from two Cat C-32-powered gensets, sparking 940 kW each, and twin Cat C-18-powered gensets, producing 425 kW each. Other features include an FFS FiFi 1 firefighting system, GE Seastream DPS-2 system, electronics suite from New World Electronics, Jastram split rudder steering system from Gulf Coast Air & Hydraulics, and Twin Disc EC300DP controls.

MA INE I SLAND FERRY Wesmac Custom Boats

Credit: Wesm ac Cust om Credit: Master Boat Bui lder

aster Boat Builders, Bayou La Batre, Ala., has delivered the 221'×48'×18', DP-2 offshore service vessel Seacor Olmeca to Seacor Offshore LLC. Master Boat also designed the 2,216-dwt OSV. Main propulsion comes from twin Caterpillar 3512C diesels, producing 1,911 hp at 1,600

Boats

fter using the same boat for nearly a half-century, the ferry service to Maine’s Isle au Haut now uses the Otter, a new Wesmac Super 46 launched in early July. The 46'9"×17'1"×4'11" vessel can carry up to 78 passengers and two crew. Built of solid fiberglass laminate by Wesmac Custom Boats, Surry, Maine, the $800,000 vessel is

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:59 PM

2016 BOATBUILDING REVIEW Subchapter T certified by the Coast Guard. It is a big step up in speed and capacity, able to carry 30 more passengers than the 50-year-old, 47' wooden “mail boat” Miss Lizzie, retired in October 2015. A second freight and passenger vessel, the 42' Mink, will remain in service alongside the Otter. Propulsion comes from a Caterpillar C18 diesel developing 803 hp at 2,100 rpm, turning a 32" left-handed 5-bladed Nibral propeller on a 3" double taper Aquamet shaft, through a ZF 500 gear with 1.964:1 ratio. In sea trials the package yielded 24.2 knots at 2,070 rpm, twice the speed of the Miss Lizzie. A Zipwake dynamic control trim tab system improves performance. Fuel capacity is around 700 gals. in two 350-gal. fiberglass tanks, with two 25gal. poly tanks for potable water.

is provided for up to 94 passengers, inside and outside, with room for five crew. The cat is the newest member of a growing fleet owned and operated by Prince of Whales, a whale-watching company with offices and docks in British Columbia in both Victoria and Vancouver. The company has 13 boats, several of which are RIBs for a more exposed but adventurous ride.

Greg Marshall Design, Victoria, which is mostly known for its yachts, designed the new boat. The boat was built to Transport Canada standards, but the design would easily meet U.S. Coast Guard Subchapter T standards. Prince of Whales only wanted 94 seats because it wanted to make sure passengers could move around while watching wildlife. This size platform

OCT OBER 2016 F A S T ER. S T RONG ER. T OU G H ER.

WASHINGTON PASSENGE R VES SEL

• Tapered drum design eliminates multi-layer spooling causing crushing and inconsistent wire tensioning • Patented and Patent Pending Booth 621 • Galvanized with plated shafts

Armstrong Marine

nabrico-marine.com 001.615.442.1300

NABRICO

16-NAB-3127 WorkBoat Mag Dec Sidewinder M lf.indd 1

10/4/16 9:44 AM

Credit: Arm strong Marine

amed the Salish Sea Dream, the new aluminum catamaran built at Armstrong Marine measures 75'8"×26'3" and is powered by four 700-hp Volvo-Penta D13-700 engines, producing a total of 2,800 hp. The engines turn four MJP Ultrajet 377 waterjets through ZF 325-1 marine gears (1:1). The draft is 3'7". Seating www.workboat.com • DECEMBER 2016 • WorkBoat

WB_BoatBuilding_LINO.indd 117

Classified Advertising Contact:

Jeff P owell (207) 842-5573 • jpowell@divcom.com 117

10/28/16 3:59 PM

2016 BOATBUILDING REVIEW in the U.S. would be certified for 149 passengers. Transport Canada increases the regulatory demands for passenger boats based on length. Over 24 meters is similar to Subchapter K in the U.S.

knots and a top speed of 16 knots. The new ferry replaces the 250-passenger, 42-vehicle Governor, built in 1954. Bronswerk Group supplied the HVAC system for the Woods Hole.

boom crane, two 5-ton MacGregor hydraulic capstans, and two MacGregor 15-ton hydraulic tugger winches.

12 MA SSACHU SETTS FRE IGHT/ PASSENGE R FERRY Conrad Shipyard

MU LTIPURP OSE FIEL D S UPPORT VES SEL

S ASSAFRA SCLA SS T UG

Chesapeake Shipbuilding

Eastern Shipbuilding Group

Credit: Vane Brothers

B Credit: C onrad Shipyar d

he Woods Hole, the newest ferry for the Woods Hole, Martha’s Vineyard and Nantucket Steamship Authority, Wood Hole, Mass., was built at Conrad Shipyard in Morgan City, La., and delivered in May. It makes the 45-minute run between Woods Hole and Martha’s Vineyard. Elliott Bay Design Group, Seattle, designed the 235'×64'×18'6" Woods Hole. The single-ended ferry can accommodate 10 tractor-trailer trucks on its roll-through cargo deck, or 50 passenger vehicles, or a mixture of trucks and cars, plus 384 passengers on the second deck. Over the freight deck is the passenger deck’s two lounge areas with reclining seats, Wi-Fi stations and a concession area. Passengers also have an open foredeck. The last Elliott Bay-designed ferry for The Steamship Authority, the Island Home, was built for maximum passenger carrying, but the new ferry is designed around the freight deck arrangement. Powered by a pair of MTU 4000 diesels that together put out 5,362 hp, the Woods Hole has a design service speed of 14.5 118

WB_BoatBuilding_LINO.indd 118

Credit: Eastern Shipbui lding G rou p

astern Shipbuilding Group, Panama City, Fla., delivered the DP-2, 212'7"×59'1"×25'7" multipurpose field support vessel Harvey Stone to Harvey Gulf International Marine, New Orleans, in August. Designed by Robert Allan Ltd., Vancouver, British Columbia, the 1,280-dwt MPFSV has tankage for 232,355 gals. of cargo fuel oil; 401,020 gals. drill water and freshwater; 26,092 gals. fuel oil in day tanks; 50,680 gals. potable water; and 24,866 AFFF foam. Propulsion comes from a pair of GE Marine GE12V250MDC, IMO Tier II, EPA Tier 4(i) diesel engines, producing 4,687 hp at 1,000 rpm each. The engines turn Schottel SRP3030 CPP wheels in nozzles through Karl Senner-supplied Reintjes LAF 3414P HL marine gears. The new MPSFV has a bollard pull of 104 LT (106 MT). For additional maneuverability around offshore structures, the Harvey Stone is fitted with two Schottel STT2 bowthrusters, each powered by a 600-kW electric motor. Up top are a MacGregor 10-ton hydraulic knuckle

altimore-based Vane Brothers took delivery of the 94'×32'×13'6", 3,000-hp model bow tug Fort McHenry in July. The vessel is the 12th Sassafras-class tug built in Salisbury, Md., at Chesapeake Shipbuilding. Designed by Frank Basile for Entech Designs, LLC, Kenner, La., the vessel, like its sisters, has an ABS loadline. The Fort McHenry is now part of Vane’s New York-based Alpha fleet. Fort McHenry’s 13-knot speed is provided by twin Caterpillar 3512 Tier 3 engines paired with Twin Disc marine gears with 6:1 reduction ratios, that turn Troost 4-bladed open-wheeled propellers. Ship’s service power is delivered by a pair of 99-kW gensets powered by John Deere generator-drive engines. A JonRie Series 500 single-drum towing winch is mounted on deck with a JonRie capstan. The tug has an estimated 38-ton bollard pull. Crew comfort ranks high in the Vane list of priorities. The interior living spaces are fitted out with soft-core panels and heavy firerated doors to provide a quiet ride. In the wheelhouse, a full suite of Simrad electronics includes solid state, Halo radars, autopilot, gyro compass/satellite compass, and multifunction GPS

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 3:59 PM

Booth 3309

WB_FULLS.indd 119

10/27/16 3:56 PM

2016 BOATBUILDING REVIEW displays and touch-screen displays. Custom installation was by Rhodes Electronics, Houma, La.

MA SSACHU SETTS FIRE BOA T

monitor aft of the wheelhouse. The single fire pump produces a minimum 1,500 gpm.

NOVEMBER 2016 ASD TRA

Moose Boats

CTOR

TUG

Main Iron Works

(also, a Navionics chart plotter, Ritchie compass, Furuno AIS, and two Icom VHFs) soundproof insulation throughout the engine room and crew quarters, stainless steel bitts and bow staple, and four bunkrooms with seven berths. For firefighting, the Mr. Ruben has a 500gpm monitor powered by a 4" pump and 25-hp motor. M&M Bumper Service provided the laminated bow and stern bumpers. There’s also a Washington Chain & Supply RSRH-100, 100-ton tow hook. The Mr. Ruben is the sixth ASD tractor tug and 10th new tug built for Bisso by Main Iron in the last 25 years.

HIGH-SPEED ALUMI NUM F ERRY Credit: B ob Myer s

Credit: Bisso Towboat Com pany

n August, the New Bedford (Mass.) Fire Department christened its new fireboat, the Jesse Pacheco, named for Lt. Jesse Pacheco Jr., the last New Bedford firefighter to die in the line of duty in 1993. Built by Moose Boats, Petaluma, Calif., the 38'10"×13'6" catamaran is a near sistership to the Salish Star that was delivered to the Bellingham, Wash., fire department in 2015. The two boats have the same hull and propulsion system, twin 425-hp Cummins QSB6.7L turbo diesels matched up with HamiltonJet HJ292 waterjets through Twin Disc MG-5075SC marine gears. That gives both fireboats a top speed of 35 knots and a cruising speed of 28 knots. The basic difference between the two fireboats is that the Jesse Pacheco has a Hale fire pump on one of its two Cummins diesels, while the Salish Star has a Hale pump on both of its diesels. Having only one pump on the Jesse Pacheco allows it to accommodate a generator on the starboard side. The generator furnishes power for reverse-cycle air conditioning that provides heat within the cabin, heats the windshield glass and cools the cabin. The Jesse Pacheco has a 2,000gpm Elkhart fire monitor on top of the wheelhouse and a 500-gpm Elkhart 120

WB_BoatBuilding_LINO.indd 120

n mid-September, Bisso Towboat Company Inc. took delivery of the 4,480-hp ASD tractor tug Mr. Ruben from Main Iron Works LLC. The Mr. Ruben is the first in a series of two identical tugs that Houma, La.-based Main Iron is building for the New Orleans tug operator. The 100'×38'×16'6" tug is powered by a pair of Caterpillar 3515T3MPL Tier 3 main engines, each generating 2,240 hp at 1,600 rpm. The engines drive two Rolls-Royce US 205 FP Z-drives with 90.6"×82.4", 4-bladed stainless-steel propellers set in nozzles. The package gives the tug a speed of 12 knots. The bollard pull is estimated to be around 60 tons. The Mr. Ruben’s maximum draft is 13'6". The new tug is almost an exact replica of the Becky S. delivered last year. Ship’s service power is provided by two 99-kW Marathon generators powered by John Deere 4045AFM85 Tier 3 engines. The tug is equipped with one JonRie Intertech Series 230 hydraulic bow winch equipped with 500' of 8"-circumference AmSteel Blue, a torque-free, 12-strand single braid wire rope from Samson. The tug also features USCG-approved engine room monitoring and fire/smoke alarm systems, Simrad navigation/electronics

Gladding-Hearn

Credit: G ladding- Hearn

uilt by Somerset, Mass.-based Gladding-Hearn, the Incat Crowther-designed 153'6"×34'6" Grey Lady IV, a high-speed, aluminum catamaran ferry, was delivered to Hyannis Harbor Tours in late August. This is the fourth ferry the shipyard has built for the Hyannis, Mass.-based company. It’s also the largest by about 10'. The ferry’s main propulsion comes from four Cummins QSK60-M diesels, each putting out 2,200 hp, matched up with HamiltonJet HM721 waterjets through Twin Disc MG-61500SC horizontally offset gearboxes. The continuous-duty rated Cummins engines will probably operate at about 70% power, but if one engine goes down, the remaining three engines operating at 100% power will allow the Grey Lady IV to maintain its schedule. Since part of the new ferry’s run can be exposed to weather, the

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 4:00 PM

2016 BOATBUILDING REVIEW boat has a Naiad Dynamics trim tab ride-control system that reduces the ferry’s motion by countering the effect of waves and wind.

REFU

VANE BROTHERS TUGS

SAN FRANCISCO FIREBO AT

Conrad Industries

ELI GN TANK BA RGE

Vigor Industrial

Jesse Engineering Co.

Credit: M axum

P etroleum

ancho Dominguez-based Maxum Petroleum’s latest vessel is still under construction, but when it hits the water in February 2017 at Jesse Engineering Co. in Tacoma, Wash., the double-hulled product tanker Global Provider should give Maxum a lot more flexibility when making deliveries. Coming in at 126'×32' with a capacity of 3,700 bbls. of diesel and 24,000 gals. of lube oil, the Global Provider is smaller in size and capacity than its four 10,000-bbl. barges but much bigger than the Dagwood, Maxum’s 250-bbl. tanker. This will allow the vessel to make deliveries faster since the Global Provider is smaller than the barges. Designed by Elliott Bay Design Group, the Global Provider will work mostly in Puget Sound. Down below in the engine room will be a pair of 660-hp Cummins QSK19M diesels matched up with Twin Disc MGX-5202SC gears and 48"-dia., 4-bladed stainless steel props. There will also be a pair of Northern Lights generators with hydraulic pumps on them. When the Global Provider is servicing tugs, a Rapp Marine HP30 5F deck crane with a 30' extension will handle the deck hoses, and the diesel fuel or lube oil will be pumped by 6" Blackmer pumps.

Credit: Vane Brothers

Credit: Vig or Indust rial

onrad Industries’ Orange, Texas, shipyard is building three 110'×38'×17' tugs for Baltimore-based Vane Brothers. The new Assateagueclass ATB (articulated tug/barge unit) tugs are designed by Castleman Maritime LLC, Clear Lake Shores, Texas, and developed using ABS rules for a classed vessel. They feature raised forecastles and will admeasure under 500 GT. The tugs will be powered by two Cummins QSK-60 diesels each producing 2,200 hp at 1,800 rpm. The engines will turn open 4-bladed, 102", bronze propellers mounted on 9.5" shafts through Karl Senner-supplied Reintjes WAF 873 marine gears with 7.087:1 reduction ratios. Two 125-kW Cummins generators and one 60-kW Cummins emergency generator will power the tugs’ electrical systems. The design features the Beacon Finland JAK-700 coupling system that will connect each tug to its 405'×74', 80,000-bbl. barge. Crew access to the barges will be accomplished via a Schoelhorn-Albrecht custom-made gangway. Castleman Maritime’s designers worked closely with the designers at Bristol Harbor Group, Bristol, R.I., who designed the ATB barges that the new tugs will be mated to. The first tug, Assateague, is scheduled for delivery in August 2017.

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_BoatBuilding_LINO.indd 121

fter 60 years, the San Francisco Fire Department has a new fireboat. Designed by Jensen Maritime Consultants and built at Vigor Industrial’s Seattle shipyard, the $11.8 million, steel-hulled Fireboat 3 is considered by many to be a first-in-class vessel. Three Cummins QSK19-M, Tier 3 diesel engines, producing 750 hp at 1,800 rpm each, provide propulsion and pumping power. When it comes to pumping, the mains power three Counterfire ESF 300-550 pumps with a capacity of 6,000 gpm each. That’s a total of 18,000 gpm at 150 psi (all three pumps in parallel) or 6,000 gpm at 300 psi (two pumps in series) that flows through six Stang monitors. Power is transmitted to the pumps through three Logan LC318 SAE #0 air actuated clutches and Elbe cardan shafts with Centa Centaflex-R flywheel-mounted torsional coupling. The engines are mounted on Christie & Grey TSC T-10 vibration isolators For propulsion from the front of the engine, the two outboard Cummins engines also provide 591 hp at 1,800 rpm. The engines turn 62"×55", 4-bladed, CF-3 Sound stainless steel propellers through Centa CX-56 torsional couplings and Karl Senner-supplied Reintjes WAF 364 reduction gears with 4.92:1 reduction ratios. For added maneuverability, the new fireboat has a Wesmar V2-2ONS bowthruster. The Fireboat 3 has a running speed of 11.5 knots.

121

10/28/16 4:01 PM

5,500-hp Tugs

Steel Cowboys Crescent Towing’s new tugs have more horsepower and added maneuverability to handle bigger ships.

By Ken Hocke, Senior Editor

122

WB_BG_Crescent_LINO.indd 122

ew Orleans-based Crescent Towing added the new 92'×38'×17', 5,500-hp, Z-drive ship escort/ship assist tug Mardi Gras to its New Orleans fleet back in March. Two sisterships — Arkansas and South Carolina — are scheduled to be delivered by the end of 2016. The boats, designed by Jensen Maritime, Seattle, are being built at Steiner Shipyard, Bayou La Batre, Ala. The new Z-drives are the same size as the J.K. McLean, Lisa Cooper and David J. Cooper built in 2010-2011 at C&G Boat Works Inc. The difference between the tugs is the horsepower. The C&G-built Z-drives are 5,225 hp and the new tugs are 5,500 hp. After the South Carolina is delivered in December, Crescent will have nine Z-drives out of a fleet of 28 tugs, according to its website.

T ow i ng’ s ewn hor s poe w re

tugs hav e lp nte y of to w r es tl e bi g s hi sp .

“Our customers drive this process. They are asking for more power, more maneuverability and for the tug to be in class (A-1 Towing),” said Crescent’s executive vice president, Keith Kettenring. “Two of these tugs (Mardi Gras and South Carolina) will operate in the northern harbor area of the Mississippi River between mile 106 (New Orleans) and mile 235 (Baton Rouge, La.) and the [Arkansas] will operate in Savannah, Georgia.” With a draft of 17', the Mardi Gras has been in operation for several months, and Kettenring said Crescent is very satisfied with the tug’s performance so far. “The first to be delivered has been operating in the (New Orleans) area since March with great reviews from the captains and river pilots,” he said. The widening of the Panama Canal and an ex-

Steiner Shipy ard / Crescent Towing

Cr es cent

www.workboat.com • DECEMBER 2016 • WorkBoat

11/4/16 8:44 AM

MACHINERY M ATTERS Though Steiner Shipyard has built few tugs in its more than 50 years of operation, Russell Steiner, the yard’s owner said he didn’t hesitate to go after the job. “We had only done four or five tugs before this, but we really wanted to build these Z-drive tugs,” he said. “We knew what we were doing.” “We embarked on our latest new-

Steiner Shipy ard

pected increase in grain exports played a part in the design of the Mardi Gras, Arkansas and South Carolina. Crescent Towing is betting that not only will grain exports stay strong, but that the expansion of the canal will mean more and larger containerships calling at East Coast ports. “Yes, the post-Panamax tonnage into Savannah helps with that decision” to build the new tugs, said Kettenring. In addition to New Orleans, Crescent has operations in Savannah, Ga., and Mobile, Ala. “We have several new terminals under construction, the refiners continue to expand and the world is eating more proteins,” he said. “So in the long run — yes, we expect to see more ship calls,” he said.

A l l thr e of the new tugs d el i v er de bef or e the end

w i l l be of the y ear .

building program two years ago with a yard that was unknown to us,” said Kettenring. “This project was a first for Steiner Shipyard and a leap of faith into the unknown for Crescent. However, we were all placed at ease after our kick-off meeting when it became apparent that Steiner shared the same customer-centric philosophy which we hold dear.” Steiner said he wanted to build the tugs because he knew Z-drives would give Crescent the flexibility it needed in the new tugs. “The maneuverability you get with Z-drives makes a huge difference,” Steiner said. He speaks from experience, having built a series of 120'×34' Z-drive towboats for Southern Towing Co. over the past decade. At the time, no one else was putting Z-drives on towboats. Southern officials said the Z-drives

MARDI GRAS, ARKANSAS, SOUTH CAROLINA SPECIFICATIONS

Steiner Shipy ard / Crescent Towing

Owner: Crescent Towing Builder: Steiner Shipyard Inc. Designer: Jensen Maritime Mission: Escort tug Length: 92' Beam: 38' Draft: 17' Main Propulsion: (2) GE 8L-250, 2,748 hp

Bollard Pull: 70 tons Z-drive: (2) Rolls-Royce US255FP Ship’s Service Power: (2) John Deerepowered genset, 99 kW Hull Construction: Steel Capacities (gallons): Fuel, 34,360; potable water, 4,180 Ancillary Equipment: JonRie F230 Container Master escort winch; John Deerepowered fire monito , 4,100 gpm at 110 psi Classification/Certificatio ABS class Maltese Cross A-1 Towing, AMS, Full Ocean Service, International Loadline, Escort Rating Delivery Date: Mardi Gras, March 2016; Arkansas, November 2016; South Carolina, December 2016

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_BG_Crescent_LINO.indd 123

provide a lot more thrust for the same horsepower as conventional power. “We had fewer problems building those boats than we did building shrimp boats,” said Steiner. Bill Stegbauer, Southern Towing’s president told WorkBoat back in 2008 that with Z-drives, “there are no big rudders, no struts,” he said. “And the Z-drive is always going forward, even when the boat is going in reverse.” That is the kind of maneuverability Crescent was looking for, said Steiner. The new Crescent tugs are fitted with pairs of steerable Rolls-Royce US255FP Z-drive units connected to twin Tier 3 GE 8L250 diesel engines, producing 2,748 hp each. The engines turn P-30 2,800-mm fixed pitch propellers in nozzles. The units have hydraulic clutches and weld-in mountings, Vulkan carbon fiber straight shafting, Vulkan bulkhead mounted shaft bearings and Vulkan flywheel mounted flexible couplings. In the wheelhouse are mounted engine and thruster controls. One of the challenges of working on the Mississippi River is operating during high-water events. The maneuverability of the new tugs makes fighting high water more manageable, said Kettenring. “In the spring the river swells with rain and snow melt and the increased velocity can cause ships to breakout, and they often require tugs to hold them in berth or anchorage.” HEAVY-DUTY WI NCHES Another piece of equipment that is vital to the proper operation of these tugs are their winches. JonRie InterTech, Manahawkin, N.J., introduced its new Container Master winch series on the Mardi Gras. The Container Master series was de123

11/4/16 8:42 AM

signed with increased braking capability and rope capacity to deal with larger containerships, such as the 8,000-TEU containerships that call at the Port of New Orleans. The new winch series is a heavy-duty design to deal with increased loading due to the increased sail area of today’s containerships, according to JonRie. The tug’s winch holds 550' of 9"

plasma line. Brandon Durar, JonRie’s president, told WorkBoat that this is a new line of heavy-duty winches so future winches “may hold more or less.” The winch features JonRie’s new Gen-X controls with its hall effect foot pedal that has no moving parts that make contact with each other, thus reducing breakdowns. There is also a message screen showing the param-

C MPASS

radar school

Available courses include: ECDIS, ARPA, RADAR OBSERVER RADAR RECERTIFICATION & CUSTOM COURSES

compasscourses.com 425.778.1923

Steiner Shipy ard / Crescent Towing

5,500-hp Tugs

Rol l s - R oy ce -Z rd i v e uni new tugs xte r a m neuva

ts gi v e the er bia l i ty .

eters of the winch and the cause of any malfunctions that occur. If you need to quickly back off your tow, the proportional render block lets you do that with a controlled freewheeling of the drum that feathers line out at a rapid pace. The auto abort feature takes away any guesswork on the part of the operator. “You don’t have to think,” said Durar. “It starts the system, releases the brake, shuts down the motor, and if you lost power, a 24 VDC backup system comes into play.” Some of JonRie’s standard features also come with the winch including a tension readout system with dimming controls for better night vision. Steiner said the project has been a team effort. “Working for Crescent and its team was easy. They’re knowledgeable and were able to give us help if we needed it,” he said. Kettenring agreed. “When the rare problem did surface, it was always handled openly with honest communication and a willingness to work together in finding a solution,” he said. — Correspondent Michael Crowley contributed to this report.

ROTATING EQUIPMENT ALIGNMENT 1951

CHOCKING ON SITE MACHINING 3D MEASUREMENT & SCANNING VIBRATION MEASUREMENT & ANALYSIS SHAFT POWER MEASUREMENT

124

WB_BG_Crescent_LINO.indd 124

www.workboat.com • DECEMBER 2016 • WorkBoat

11/4/16 8:50 AM

THE

POWER

Booth 3921

TO MOVE YOUR SHIPYARD PROJECTS

See Us @ Booth 3921

7535 Ton PSV Load Out & Transfer

NEW IBERIA, LA | MORGAN CITY, LA | HOUSTON, TX | MOBILE. AL

THE MEGA TRANSPORT EXPERTS WB_FULLS.indd 125

berardtrans.com 10/28/16 12:31 PM

Internat ional Wor kBoat Show

On Display

he 37th edition of the International WorkBoat Show will be held Nov. 30-Dec. 2 at the Morial Convention Center in New Orleans. In addition to the hundreds of exhibitors that will be showcasing thousands of products and services to attendees, the show offers much, much more. On Wednesday, the opening day of the show, former Navy SEALs Jocko Willink and Leif Babin will deliver the keynote address “How U.S. Navy SEALs Lead and Win.” The next day, naval architect Mark Masor of Gibbs & Cox Inc. and Tom Czekanski, senior curator and restoration manager at the National WW II Museum, will discuss the museum’s PT-305 restoration project. In 2017, the museum plans to operate PT-305 on Lake Pontchartrain where visitors can experience the boat

126

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 126

as Navy sailors once did. The WorkBoat Annual Conference kicks off on Wednesday morning and runs through Friday. The conference is divided into five concurrent tracks: Legal and Regulatory, Business Management, Technical, Safety and Workforce. Sessions include autonomous vessels, improving shipbuilding safety, hybrid power opportunities in the offshore energy sector, LNG training, maritime cybersecurity, Subchapter M compliance, and repurposing stacked OSVs. On Wednesday and Thursday, the show is open from 10:00 a.m. to 5:30 p.m., and on Friday, show hours are from 10:00 a.m. to 3:00 p.m. For more information on the show, call 800454-3007, email: customerservice@divcom.com, or go to www.workboatshow.com.

Diversified Communication

The 37th International WorkBoat Show.

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 5:31 PM

WORKBOAT ANNUAL CONFERENCE The WorkBoat Annual Conference brings structured professional development and education to the International WorkBoat Show experience. Curated by the content and editorial team at WorkBoat and delivered by recogniz ed leaders in the maritime industry, the WorkBoat Annual Conference is divided into fi e concurrent tracks. Each track is designed to boost your business and bring you up to speed on the topics that matter to you most. For full track descrip tions and session details, visit w ww.w orkb oatshow.com/ conference.

Wednesday, Nov. 30 10:45 am - 1 1:30 am TRACK: L egal and R egulatory Marine Casualty Reporting and Investigations 10:45 am - 1 1:30 am TRACK: B usiness M anagement Staying Afloat When the Tides Are Strong 11:45 am - 1 2:30 p m TRACK: Technical Autonomous Vessels: Making the Concept Commercially Vi able

11:45 am - 1 2:30 p m TRACK: Technical You’ ve Been Asked to Reduce Fuel Consumption: Now What? 11:45 am - 1 2:30 p m TRACK: B usiness M anagement Getting Your Maritime Connectivity Strategy Right – Challenges and Best Practices 1:15 p m - 2 :00 p m TRACK: S afety Preventing Workplace Inj uries with Ergonomics 1:15 p m - 2 :00 p m TRACK: Technical LNG Bunkering Infrastructure

11:45 am - 1 2:30 p m TRACK: B usiness M anagement Using Big Data to Drive Maintenance and Operations Improvements

4:15 p m - 5 :00 p m TRACK: L egal and R egulatory Subchapter M Compliance Management

1:15 pm - 2 :00 p m TRACK: Technical Improving Shipbuilding Safety

4:15 p m - 5 :00 p m TRACK: B usiness M anagement Repurposing Stacked OSVs for U se as Training Vessels

1:15 pm - 2 :00 p m TRACK: L egal and R egulatory Creating an Exceptional Organiz ation 2:00 pm – 2:45 p m TRACK: Technical Opportunities for Hybrid Power in the U .S. Offshore Oil & Gas Sector 3:00 pm - 4 :00 p m KEYNOTE: H ow U .S . N avy S EALs L ead and Win Jocko Willink & Leif Babin 4:15 pm - 5 :00 p m TRACK: Technical Training for Crews Aboard LNG Fueled Vessels 4:15 pm - 5 :00 p m TRACK: B usiness M anagement Global Influences on The Workboat Market

Thur sday, Dec. 1 10:45 am - 1 1:30 am TRACK: S afety Safety in the Down Market

Friday, Dec. 2 10:45 am - 1 1:30 am TRACK: Technical Improved Operational Profile and Mane verability 10:45 am - 1 1:30 am TRACK: Workforce Managing Millennials & Maritime Leadership 11:45 am - 1 2:30 p m TRACK: L egal and R egulatory River Locks and Dams 11:45 am - 1 2:30 p m TRACK: Workforce The Effectiveness of Onboard E- Learning Training for Maritime Regulatory Compliance

The WorkBoat Annu al Conference ru ns concu rrent with the show on Wednesday , Thu rsday and F riday with breaks in between sessions to ex plore the ex hibit hall, catch u p with colleag ues, check y ou r em ail, or g rab a q uick bite to eat.

10:45 am - 1 1:30 am TRACK: B usiness M anagement Maritime Cybersecurity and the Last 4, 000 Miles

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 127

127

10/28/16 5:31 PM

Internat ional Wor kBoat Show THE WORKBOAT ANNUAL CONFERENCE SCHEDULE IS DIVIDED INTO FIVE CONCURRENT TRACKS: SAFETY For most marine operations, maintaining a safe workplace is both a top priority and an ongoing challenge. This educational track will provide updates on current standards, best practices, and new maritime safety solutions. TECHNICAL The marine industry is a constantly evolving technological environment. Learn how the latest innovations can bring efficiency and enhance quality – from the corporate office to the vessel engine room.

BUSINESS MANAGEMENT Explore the various challenges and opportunities that come with running a maritime business. Expect to leave with solutions, strategies, and new ways of thinking. WORKFORCE Economic pressures can present workforce-related challenges to the maritime industry. In these sessions, you’ll uncover new ways to tackle daily workforce challenges and build successful training and recruitment programs.

LEGAL AND REGULATORY Understand marine law, current rules and regulatory trends. Learn the status of key pending legislation so you can plan ahead to keep your business in compliance.

ANNUAL CONFERENCE PROGRAM Wednesday, Nov. 30 10:45AM – 11:30AM TRACK: BUSINESS MANAGEMENT STAYING AFLOAT WHEN THE TIDES ARE STRONG

uring tough times, many businesses make budget cuts and lay off staff, and in the worst case, close their doors permanently. In the maritime industry, success is often hit or miss. But despite unknown factors, smart business recommendations can give companies a sense of stability through innovative ways to market and streamlining of daily operations. These recommendations can increase revenue no matter how bad the economy may be during hard times. Presenter: John Kerry, CEO/President, Kerry Consulting Group LLC Location: Starboard Room, Great Hall 10:45AM – 11:30AM TRACK: LEGAL AND REGULATORY MARINE CASUALTY REPORTING AND INVESTIGATIONS

n this session, panelists will discuss marine casualties, hazardous conditions, reporting requirements, and in128

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 128

vestigations for vessel-related accidents that occur on the navigable waters of the U.S. When these incidents occur, individuals and companies face a wide range of possible repercussions, including loss of personal liberty and civil liability. The discussion will also involve the various types of investigations conducted by the Coast Guard and the NTSB. Presenters: Alan Bernstein, Owner, BB Riverboats || Sean Pribyl, Associate, Blank Rome LLP Location: Port Room, Great Hall 11:45AM – 12:30PM TRACK: BUSINESS MANAGEMENT USING BIG DATA TO DRIVE MAINTENANCE AND OPERATIONS IMPROVEMENTS

here are many challenges facing owners and operators in different workboat markets including: macroeconomic volatility and uncertainty, increasingly complex vessels, environmental regulations, and attracting and retaining quality technical leaders onboard and ashore. One path forward for owners and operators is to leverage the step-changes that are occurring in technology to not only reduce costs and become more efficient, but also to re-

duce operational and compliance risk. With greater “sensorization,” increased connectivity, and improvements in data analytics, there are new opportunities to capture value from operations and maintenance improvement by turning previously low value data into high value actionable information. The marine industry is now using data and analytics to achieve improvements in reliability, safety, efficiency and productivity. This session will walk you through examples of the use of data and analytics to improve maintenance and operations performance. Presenter: Rob Bradenham, Global Sales and Business Development Manager, Caterpillar Location: Port Room, Great Hall 11:45AM – 12:30PM TRACK: TECHNICAL AUTONOMOUS VESSELS: MAKING THE CONCEPT COMMERCIALLY VIABLE

utonomy is rapidly making its way into the consumer marketplace with airborne drones, self-parking and driver-assist cars. In the commercial sector we are now seeing autonomous tractors and construction equipment. However, in the maritime industry, autonomy has traditionally been low

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 6:01 PM

Internat ional Wor kBoat Show cost and limited in capability, such as autopilots, or expensive with a narrow scope, such as dynamic positioning. With continual advances in autonomous technologies and the general public’s greater acceptance towards it, the maritime industry will be the next to benefit from adoption of this technology. Presenters: Courtney Bradbury, Manager, Offshore Engineering, Crowley Marine Solutions || Jeff Bartkowski, Sales Director, Sea Machines Location: Starboard Room, Great Hall 1:15PM – 2:00PM TRACK: LEGAL AND REGULATORY CREATING AN EXCEPTIONAL ORGANIZATION

ing productivity for project schedules with tight deadlines, and it eliminates the need to settle for less than optimal welding parameters which result in better weld quality and less rework. This presentation will discuss how remote welding control technology operates and provide details on its benefits for the shipbuilding industry.

Presenter: Dr. Davion Hill, Energy Storage Leader-North America, DNV GL Location: Port Room, Great Hall 4:15PM – 5:00PM TRACK: BUSINESS MANAGEMENT GLOBAL INFLUENCES ON THE WORKBOAT MARKET

his session will look at the transportation of U.S. commodities to and from the global market, evaluating the various modes including barge, rail and ocean, bulk and container, and the infrastructure needed to support those movements. The U.S. commodity situation and outlook is undergoing considerable change with bulk agricultural commodities such as corn and soybeans surging, coal stagnant, crude

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 129

eadership is a fundamental cornerstone of any successful business. Through their experiences in the Navy, Jocko Willink and Leif Babin will deliver riveting Navy SEAL combat stories with practical leadership concepts and principles. This dynamic duo will dive deep into the concept of extreme ownership and how leaders in any capacity can utilize combat leadership tactics to dominate on their own battlefields, lead and win. This presentation will inspire any organization and its people both professionally and personally to become more effective leaders.

Presenter: Tom Mann, Partner, Three Tall Trees Location: Port Room, Great Hall

n big job sites or applications where welding takes place at significant distances from the power source such as shipbuilding, remote welding control technology offers the ability to set welding parameters at the weld joint. This capability increases welding operator safety by eliminating the need to walk to and from the power source to make adjustments. This reduces safety risks such as trips, slips and falls. The technology also allows for greater arc-on time, increas-

2:00PM – 2:45PM TRACK: BUSINESS MANAGEMENT OPEN SESSION: OPPORTUNITIES FOR HYBRID POWER IN THE U.S. OFFSHORE OIL AND GAS SECTOR

r. Davion Hill will present results from a recent joint industry project in the oil and gas sector which reviewed the techno-economic benefits of hybrid power for offshore service vessels. The program also identified key operational safety benefits such as the ability to operate through outages during critical maneuvering, and shortcomings in class and proxy regulatory rules that will require discussion among stakeholders.

Ex treme Ow nership: How U.S. Na vy SEA Ls L ead and Wi n Jocko Willink and Leif Babin

Presenter: Joe Ryan, Marketing Segment Manager, Miller Electric Mfg. Co. Location: Starboard Room, Great Hall

igor Alaska (Ketchikan) is on a quest to create a shipyard that embraces and honors the brilliance of the human being. This talk will explore how the shipyard is combining authentic leadership development, craft training, purpose, vision and values, and an emphasis on creating great customer, visitor and employee experiences. This talk will also explore the data behind this approach, which any organization can take.

1:15PM – 2:00PM TRACK: TECHNICAL IMPROVING SHIPBUILDING SAFETY

KEYNOTE WEDNESDAY, NOV. 30 3:00 PM – 4:00 PM

Leif Babin

Jocko Willink

oil shipments steady, and chemical movements firming. Presenter: Ken Eriksen, Senior Vice President & Head of Client Advisory and Development, Informa Economics IEG Location: Port Room, Great Hall 4:15PM – 5:00PM TRACK: TECHNICAL TRAINING FOR CREWS ABOARD LNGFUELED VESSELS

NG as a fuel is no longer way off in the future. It’s here. This presen129

10/28/16 6:06 PM

Internat ional Wor kBoat Show tation will discuss some of the properties of LNG and show you why it will be much different from the hydrocarbon fuels we are used to. New safety measures and training will be required. This session will go over some of the national (USCG) and international (IMO) requirements for crewmembers that work aboard LNG-fueled vessels. Who will need the training and what type of training will be required for different members of the crew will be discussed. Presenter: Thomas Guldner (FDNY Ret.), Marine Firefighting Inc. Location: Starboard Room, Great Hall Thur sday, Dec. 1 10:45AM – 11:30AM TRACK: BUSINESS MANAGEMENT MARITIME CYBERSECURITY AND THE LAST 44,000 MILES

ith ships becoming increasingly connected, automated and more reliant on the Internet, the risk of cyberattack grows. This new risk requires the adoption of tools and controls as well as personnel and process changes to address vulnerabilities. Guidelines and strategies to prevent hackers from compromising a vessel network will be presented, including recently published maritime guidelines from ABS. Presenter: Chris Dewitt, Senior Manager of Operational Technologies, ABS Location: Port Room, Great Hall 10:45AM – 11:30AM TRACK: SAFETY SAFETY IN THE DOWN MARKET

nderstanding how market shifts affect safety performance. Companies need to understand how ups and downs in the market dictate behaviors that affect safety performance. Presenter: TBA Location: Starboard Room, Great Hall 130

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 130

11:45AM – 12:30PM TRACK: BUSINESS MANAGEMENT GETTING YOUR MARITIME CONNECTIVITY STRATEGY RIGHT — CHALLENGES AND BEST PRACTICES

n an increasingly competitive world, commercial fleets require a communications strategy that satisfies multiple stakeholders, offers affordable broadband connections, and prepares businesses for the future. Learn about the challenges and best practices in developing a winning strategy. How the maritime satellite communications landscape is changing. What it takes to develop a strategy to suit your specific needs. What are the benefits of effective SATCOM across shoreside and shipboard applications? What are the key considerations when assessing your SATCOM needs and options? This session will address the vital questions and best practices in the development of your SATCOM strategy. Presenter: Steve Griffin, Commercial Sales Manager, KVH Industries Inc. Location: Port Room, Great Hall 11:45AM – 12:30PM TRACK: TECHNICAL YOU'VE BEEN ASKED TO REDUCE FUEL CONSUMPTION: NOW WHAT?

espite OSV operators rarely paying for fuel and the low internal cost of fuel to the producer, operators are almost always requested to reduce fuel consumption. This session will review evolving engine and control retrofit options to significantly (<5%) reduce fuel consumption on offshore supply vessels. Presenters: Perry Converse, Power Intelligence Technology Development, Caterpillar Inc. || Mukul Girotra, Global Product Leader for Marine & Stationary Business, GE Transportation Location: Starboard Room, Great Hall

1:15PM – 2:00PM TRACK: TECHNICAL LNG BUNKERING INFRASTRUCTURE

NG continues to grow as a fuel of choice for many vessel owner/ operators. But what comes first, the infrastructure or the customer? Hear from key marine industry leaders about the adoption of LNG and its ripple effect within the industry — its benefits, challenges, financing, etc. Presenter: David Grucza, Sales Project Manager, Siemens US || Joshua Sebastian, Engineering Manager, The Shearer Group Location: Port Room, Great Hall 1:15PM – 2:00PM TRACK: SAFETY PREVENTING WORKPLACE INJURIES WITH ERGONOMICS

r. Richard Bunch will discuss the importance of ergonomics and techniques that can be used to reduce injuries in the workplace. Presenter: Dr. Richard Bunch, Ergonomic Specialist and CEO, ISR Institute Inc. Location: Starboard Room, Great Hall 4:15PM – 5:00PM TRACK: BUSINESS MANAGEMENT REPURPOSING STACKED OSVS FOR USE AS TRAINING VESSELS

he current offshore market is suffering from stagnant oil prices and a resultant low demand for offshore service vessels. In order to sustain employment on U.S.-flag vessels, two factors have to come together. The first is the availability of trained crews who can operate modern vessels, and the second is to have an adequate number of U.S.-flag vessels gainfully being used for trade in a variety of functions. Repurposing U.S.-flag OSVs for alternate markets provides this double benefit. One of those markets may be as training vessels for state and federal maritime academies and other education institutions.

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 6:01 PM

Internat ional Wor kBoat Show

Presenters: Chad Fuhrmann, Americas Business Director, Maritime Assurance & Consulting Ltd. || Anil Raj, President, Technology Associates Inc. Location: Port Room, Great Hall 4:15PM – 5:00PM TRACK: LEGAL AND REGULATORY SUBCHAPTER M COMPLIANCE MANAGEMENT

n this session, you will learn what is included in the Subchapter M final

rule and how to determine, with handson exercises, which parts apply to your boats and which do not. This session will also tell you what can cause your boats to be shut down, and what the Coast Guard expects from the master of a vessel that uninspected vessel captains don't typically understand. Also, the secrets of creating a TSMS that towboat crews will actually read and understand, drafting policies and procedures without creating liability, and the formula for determining when checklists are necessary and when they are not will be covered. Presenter: Kevin Gilheany, Owner, Maritime Compliance International LLC Location: Starboard Room, Great Hall

THURSDAY, DEC. 1 3:00 PM – 4:00 PM

The Na

tional W II Mu seum PT-305 Re storation fo r Operational P assenger Service Mark Masor, Naval Architect/ Gulf Coast Operations Manager, Gibbs & Cox Inc. Tom Czekanski, Senior Curator and Restoration Manager, National WW II Museum

he National WWII Museum is nearing completion of a multiyear project to restore a historic wood PT boat built by Higgins Industries in New Orleans in 1943. In 2017, the museum plans to operate PT-305 on Lake Pontchartrain where visitors can experience the boat as Navy sailors once did. This presentation will highlight the unique aspects of the project and discuss challenges in restoring PT-305 to a Coast Guard-inspected passenger vessel.

Friday, Dec. 2 10:45AM – 11:30AM TRACK: WORKFORCE MANAGING MILLENNIALS & MARITIME LEADERSHIP

hose born after 1980, the first generation to come of age in the new millennium, have grown up in a culture defined by rapid technological change, 9/11, ongoing war, corporate misdeeds, and the Great Recession. In this session, panelists will identify millennials unique professional motivations and discuss tactics that supervisors can use to address their need for purpose, mentorship, and challenge. Presenters: Rebecca Flores, Writer/ Producer, Moxie Media Inc. || Martin Glenday, President and Co-founder, Moxie Media Inc. Location: Port Room, Great Hall 10:45AM – 11:30AM TRACK: TECHNICAL IMPROVED OPERATIONAL PROFILE AND MANEUVERABILITY

n just 10 years, pod systems have revolutionized high-speed planing vessel design and performance by delivering exceptional fuel efficiency, www.workboat.com • DECEMBER 2016 • WorkBoat

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 131

maneuverability, stability and comfort on board. This session is for designers, operators, owners, and military/government representatives interested in learning how IPS/pod systems compare to traditional inboard configurations in pilot boat, wind farm, patrol and coast guard applications in North America and Europe. Presenters: Jens Bering, Product Manager, Volvo Penta Americas || Gerard Torneman, Sales Project Manager, AB Volvo Penta Location: Starboard Room, Great Hall 11:45AM – 12:30PM TRACK: WORKFORCE THE EFFECTIVENESS OF ONBOARD E-LEARNING TRAINING FOR MARITIME REGULATORY COMPLIANCE

artin Glenday will discuss onboard e-learning. This includes technical systems requirements, bandwidth limitations, matching the curriculum to meet mariner learning needs, advantages of recordkeeping and meeting regulatory auditing needs, and making the most of the mariners’ time while they are training on board. Presenter: Martin Glenday, President and Co-founder, Moxie Media Inc. Location: Port Room, Great Hall 11:45AM – 12:30PM TRACK: LEGAL AND REGULATORY RIVER LOCKS AND DAMS

aul Rohde of the Waterways Council Inc. (WCI) will discuss the importance of our nation’s inland waterways as a commercially navigable system, and the importance of increasing the reliability and capacity of river transportation. Presenter: Paul Rohde, Vice President, Waterways Council Inc. Location: Starboard Room, Great Hall

131

10/28/16 6:06 PM

Internat ional Wor kBoat Show

Diversified Communication

Nov. 3 0 - De c. 2 , 2 016 Er nest N . Mo rial Co nvention Ce nter New O rleans

Show H ours:

Tuesday 10 am – 5 :30pm Wednesday 10 am – 5 :30pm Thursday 10 am – 3 pm De notes International Workboat Show Ex hibitors Advertising In This Issue (Listings accurate as of 10/18/16)

T: 225-644-7063 www.inmarsystems.com/alu-chairs--deckrails.html

T: 678-838-3737 www.aepusacorp.com

3X Chemistry - DirectLine Industries T: 314-633-1612 www.dlistl.com

359

ABB Marine & Turbocharging T: 504-733-0266 www.abb.com/turbocharging

3511

AER Supply Ltd. T: 281-474-3276 www.aersupply.com

2132

Aerotek T: 888-237-6835 www.aerotek.com

3165

ABS T: 281-877-6000 www.eagle.org

2862

3627

ABYC (American Boat & Yacht Council) T: 410-990-4460-101 www.abycinc.org

3468

Aerovent T: 763-551-7500 www.aerovent.com

3162

Ahead Sanitation Systems Inc. T: 337-330-4407 www.aheadsanitationsystems.com

4221

Ace World Companies T: 817-237-7700 www.aceworldcompanies.com

753

ACM Composite Bearings Americas T: +44 (0) 1709 874951 www.acmbearings.co.uk

651

Air Products AS T: 4738039969 www.airproducts.no

ACTech North America Inc. T: 734-913-0091 www.rapidcastings.com

232

Alamarin-Jet T: 358107745260 www.alamarinjet.com

Adams Fab (AFCO) T: 504-488-5731 www.donovanmarine.com

3517

Advance Marine LLC/Melcal Marine T: 302-656-2111 www.advamar.com

1741

All American Marine T: 360-647-7602 www.allamericanmarine.com

Advanced Graphic Engraving T: 337-364-1991 www.tagsfast.com

3964

Allied Systems Company T: 503-625-2560 www.alliedsystems.com

Advanced Mechanical Enterprises T: 866-377-0770 www.AMEsolutions.com

3356

AEGIR-Marine Americas T: +31 343 432 509 www.aegirmarine.com AEP Marine Parts

Alexander/Ryan Marine & Safety LLC, a Division of Drew Marine T: 504-496-0151 www.alexanderryan.com

Visit w ww.workboatshow.com for t he m ost u p-to-date i nformation about t he s how

1941

2317

Aluminum & Stainless Inc. T: 800-252-9074 www.aluminumandstainless.com

4249

Always On UPS Systems Canada Inc. T: 250-491-9777 www.alwayson.com

4244

American BOA Inc. T: 678-513-3380 www.americanboa.com

2214

American Chemical Technologies Inc. T: 800-938-0101 www.americanchemtech.com

4231

American Sprayed Fibers Inc. T: 219-313-4588 www.asfiusa.com

4000

American Traction Systems T: 239-768-0757 www.americantraction.com

2454

American Vulkan Corporation T: 863-324-2424 www.vulkan.com

3817

AmeriMex Motor and Controls LLC T: 713-225-4300 www.amerimexinc.com

1035

1706

AMI-TMQ International T: +61893310000 www.ami-tmq.com

1860

Alphatron Marine USA Inc T: 281-271-4600 www.jrc.am

1241

Analytic Systems T: 800-668-3884 www.analyticsystems.com

3557

1951

Altra Industrial Motion T: 717-217-3879 www.altramotion.com/

116

Anchor Marine & Industrial Supply T: 800-223-8014 www.anchormarinehouston.com

3041

1710

Alu Design & Services

2235

132

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 132

2850

Andromeda Systems Inc.

4218

www.workboat.com • DECEMBER 2016 • WorkBoat

11/3/16 3:47 PM

Internat ional Wor kBoat Show T: 904-637-2020 www.androsysinc.com Anixter Wire & Cable T: 800-346-3069 www.anixter.com

1550

Apex Engineering Products Corp. T: 630-820-8886 www.rydlymemarine.com

3940

API USA T: 786-565-9932 apiusa.org

4006

Apollo International Corporation T: 718-273-7300 www.apollointl.com

1251

Applegate Industrial Materials Inc. T: 225-336-4116 www.the-flex.com

2014

Appleton Marine Inc. T: 920-738-5432 www.appletonmarine.com

420

Applied Satellite Technology Systems US 3752 T: 480-247-2439 www.ast-systems.us.com Aqua Air Manufacturing T: 305-884-8363 www.aquaair.com

1863

Aqua-Dyne & Flow International T: 620-856-6222 www.aqua-dyne.com

2549

Archway Marine Lighting T: 314-535-1314 www.archwaymarinelighting.com

1535

ARCON Welding Equipment LLC T: 410-572-6000 www.arconweld.com

223

Associated Technologies T: 860-788-3380 www.weldmountsystem.com

4246

Astilleros Internacionales de Tampico 1062 T: +52(833) 357 7001 www.ait-tmm.com/english/index.html

T: 757-494-4000 www.baesystems.com Baier Marine T: 206-709-1500 www.baiermarine.com

1213

3871

Baker Lyman & Co. Inc. T: 504-831-3685 www.bakerlyman.com

1418

Atlantic Braids Ltd. T: 613-674-2728 www.atlanticbraids.com

2117

Baldor Electric Company T: 479-646-4711 www.baldor.com

4027

Atlas Incinerators APS T: +4555346655 www.atlasinc.dk

3450

Baldwin Filters T: 308-234-1951 www.baldwinfilter.com

1401

Austal USA T: 251-434-8000 www.austal.com

2361

Band-It IDEX Inc. T: 303-320-4555 www.band-it-idex.com

1160

Auto-Maskin LLC T: 832-315-1559 www.auto-maskin.com

3913

Autoship Systems Corporation T: 604-254-4171 www.autoship.com

247

Bates Reliable Solutions/Stuff 4 Water T: 832-813-7000 www.stuff4water.com

Autronica Fire and Security AS T: 954-792-6772 www.autronicafire.com

810

Baton Rouge Marine Electrical Service Inc. 804 T: 225-642-3328 www.brmes.com

650

Baumueller-Nuermont Corp. T: 678-291-0535 www.baumuller.com

3759

AV-DEC T: 817-738-9161 www.avdec.com

4171

Bayards Aluminum Constructions T: 832-390-2544 www.bayardsusa.com/

3801

Aventics Corporation T: 859-254-8031 www.aventics.com/us

Bayou Marine Electronics Inc. T: 504-279-0967 www.bayoumarine.com

2126

Bayou State Marine & Industrial Supply T: 337-937-9920 www.bayoustatemarine.com

4028

4033

AVEVA Inc. T: 713-977-1225 www.aveva.com

4101

AWAB LLC T: 954-763-3003 www.awabllc.com

803

Aweigh-Fitness T: 772-532-9642 www.aweigh-fitness.com

3952

Beacon Finland Ltd Oy T: +358 2 8387 9500 www.beaconfinland.com

Aydin Displays/KEP Marine T: 866-367-2934 www.aydindisplays.com

1508

Becker Marine Systems GmbH & Co. KG T: +49-40-241 99-0 www.becker-marine-systems.com

Ayres Composite Panels USA LLC T: 251-653-0700 www.ayrescom.com

3501

Beclawat Manufacturing Inc. T: 613-966-5611 www.beclawat.com

1240

2560

3262

AZZ Galvanizing Services T: 817-810-0095 www.azzgalvanizing.com

1162

Behringer Corporation T: 973-948-0226 www.behringersystems.com

521

Askew Industrial Corporation T: 323-974-5688 www.askewindustrial.com Aspin Kemp & Associates Inc. T: 902-620-4882 www.aka-group.com

129

Bad Dog Tools www.baddogtools.com

4162

Beier Integrated Systems T: 504-341-0123 www.beieris.com

ARKS Enterprises, Inc. T: 757-647-4838 www.arksinc.com

2735

Armstrong Marine T: 360-457-5752 www.armstrongmarine.com ASCOM/International Boatlift Exchange Inc. T: 813-653-4390 www.ibeglobal.com

735

BAE Systems

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 133

3015

Belzona

711

2127

4010

133

10/28/16 5:32 PM

Internat ional Wor kBoat Show T: 305-594-4994 www.belzona.com Bender Inc. T: 610-383-9200 www.bender.org

1152

Berard Transportation Inc. T: 337-519-9103 www.berardtrans.com Beurteaux North America T: 508-558-7007 www.beurteaux.com

3921

3461

BFG Marine Inc. T: 631-586-5500 www.bfgmarine.com

837

Big Top Manufacturing T: 850-584-7786 www.bigtopshelters.com

848

BioBlend Renewable Resources LLC T: 630-227-1800 www.bioblend.com

4230

BIOBOR/Hammonds Fuel Additives T: 800-548-9166 www.biobor.com

3256

Black Bear Corporation T: 504-495-3266 www.blackbearusa.com

833

Blommaert T: 3233552377 www.blommaertalu.be

4012

Blount Boats Inc. T: 401-245-8300 www.blountboats.com

1011

Blucher - a Watts Brand 2117 T: 978-689-6173 www.blucher-marine.com/bluecher-marinehome/ Bludworth Marine LLC T: 713-644-1595 www.vesselrepair.com Blue Aerospace T: 954-718-4404 www.blueaero.com

2561

143

Boats & Harbors T: 931-484-6100 www.boats-and-harbors.com

1400

Bocatech Inc. T: 800-491-1716 www.bocatechinc.com

3912

3471

234

Brunswick Commercial and Government Products T: 386-423-2900 www.brunswickcgp.com

Bohamet T: +48523203904 www.bohamet.pl

641

Brunvoll AS www.brunvoll.no

236

BSRM Inc. T: 888-509-0668 www.bsrminc.com

3957

Boksa Marine Design T: 813-654-9800 www.boksamarinedesign.com

3081

1819

2041

Bullard T: 859-234-6616-243 www.bullard.com

2655

Boll Filter Corporation T: 248-773-8200 www.bollfilter.com

4133

Bollinger Shipyards LLC T: 985-532-2554 www.bollingershipyards.com

1827

Bullard Abrasives Inc. T: 401-333-3000 www.bullardabrasives.com

717

Bosch Rexroth Corporation T: 800-739-7684 www.boschrexroth-us.com

2611

Bureau Veritas T: 954-525-4114-212 www.veristar.com Burger Boat Company T: 920-686-5149 www.burgerboatcommercial.com

4065

Bostrom Company, H.O. T: 262-542-0222 www.hobostrom.com Braemar Technical Services (Engineering) Inc. T: 713-820-9606 www.braemarengineering.com

3419

441

Butterworth Inc. T: 281-821-7300 www.butterworth.com

Brass Works Inc. T: 386-943-8857 www.thebrassworksinc.com

1317

BVA Hydraulics T: 816-410-5726 www.bvahydraulics.com

Breco International T: 713-641-6073 www.brecointernational.net

1409

Byrne Rice & Turner Inc. T: 504-525-7137 www.brtmarine.com

BriarTek ORCA MOB Alarm & Location Solutions T: 703-548-7892 www.briartek.com

Blue Sky DEF NA T: 757-673-0250 www.blueskydefna.com

4228

Blue Wave Tech T: 702-273-6366 www.healthmateforever.com

1063

Britmar Marine Ltd. T: 604-983-4303 www.britmar.com

BMT Group T: 703-920-7070 www.dandp.com

3458

Bronswerk Marine Inc. T: 619-813-4797 www.bronswerkgroup.com

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 134

BRP US Inc. T: 262-884-5372 www.evinrude.com

Boeshield T-9 T: 616-355-6615 www.boeshield.com

Bristol Harbor Group Inc. T: 401-253-4318 www.bristolharborgroup.com

134

T: 954-614-6819 browardarmature.com

Broward Armature & Generator

4016

3154

746

4243

416

1521

C Fly Marine Services T: 985-792-7761 www.cflymarine.com

344

Cadmatic T: +31612523061 www.cadmatic.com

241

California State University Maritime Academy T: 707-654-1072 www.csum.edu

1116

1954

2449

Calumet Specialty Lubricants T: 800-437-3188 www.calumetspecialty.com

2758

4114

CAMO - Coastal and Marine Operators T: 504-425-0797 www.camogroup.org

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 5:33 PM

Internat ional Wor kBoat Show Capital Bedding Company Inc. T: 225-357-2253 www.capitalbed.com

3868

Carboline Company T: 314-644-1000 www.carboline.com

1300

Carlisle & Finch Company (The) T: 513-681-6080 www.carlislefinch.com

734

Carrier Marine & Offshore T: +1 704.875.7016 www.carrier.com/marine-offshore

810

Caterpillar Inc. T: 309-675-1000 MARINE.CAT.COM

2701, 2801

Cathelco Ltd. T: +44 (0)1246 457900 www.cathelco.com

2117

Cavotec Inc. T: 704-873-3009 www.cavotec.com

3942

CC Jensen A/S T: 011 45 63 21 20 20 www.cjc-windows.dk

1462

CEJN North America T: 847-263-7200 www.cejn.us

845

CENTA Corporation T: 630-236-3500 www.centa.info

3427

Center Lift Inc. T: 504-300-1347 www.center-lift.com

4201

CertainTeed Corporation T: 610-427-3315 www.certainteed.com

4105

Certified Labs T: 972-579-2447 northamerica.certifiedlabs.com/

4140

CFI T: 409-273-7462 www.confluids.com

552

Chafe-Pro by FJORD, Inc. T: 336-567-0336 www.ChafePro.com

2755

Charles Industries - Marine Group T: 847-806-6300 www.charlesindustries.com

2946

Chase Cabinet Makers T: 985-867-4737 www.chasecabinetmakers.com

2058

www.compasswater.com Chevron Lubricants T: 888-533-6571 www.chevronlubricants.com

1927

Christie & Grey Inc. T: 508-217-3061 www.christiegrey.com

2161

Cimolai Technology T: +39 0499404539 www.cimolaitechnology.com

3362

Clark Foam Products Corp. T: 847-224-9255 www.clarkfoam.net ClassNK America T: 562-432-4307 www.ClassNKAmerica.com

1111

Clean Seal Inc. T: 800-366-3682 www.cleanseal.com

4222

CLS America T: 619-549-4009 www.clsamerica.com/

2153

CNF Inc. T: 228-762-4612 cnfinc.net

610

Coastal Marine Equipment Inc. T: 228-832-7655 www.cmei.biz

1235

Coastal Timbers Inc. T: 337-369-3017 www.coastaltimbers.com

1236

Cobham T: 925-798-7979 www.cobham.com/SATCOM

3035

Cobra Products T: 978-568-9815 www.cobraproductsus.com

835

Colonna’s Shipyard Inc./Steel America T: 757-545-2414 www.colonnashipyard.com

2259

Columbia Industrial Products T: 541-607-3655 www.cipcomposites.com

533

Command Holdings Group T: 586-707-4024 commandholdings.com

659

ComNav Marine Ltd. T: 604-207-1600 www.comnavmarine.com

1649

Compass Water Solutions T: 985-346-0122

2541

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 135

141

Complete Logistical Services LLC T: 985-255-0257 www.clogistical.com Conrad Shipyard T: 985-384-3060 www.conradindustries.com

240

1427

Consilium Marine US Inc. T: 954-791-7550 www.consilium.se

640

Continental Western Corporation T: 504-733-6057 www.cwestern.com

541

Controlled Water Systems T: 731-645-3222 www.controlledwater.com

942

Cortland Company Inc. T: 281-265-1900 www.cortlandcompany.com

1745

Cospolich Inc. T: 985-725-0222 www.cospolich.com

1127

CounterFire Ltd. T: 44 1905729911 counterfirefifi.com

2260

Cox T: +4471273454424 www.coxmarine.com

3963

Coxreels Inc. T: 480-820-6396 www.coxreels.com

3753

CPI Marine T: 512-295-2683 www.cpitx.com

3462

Craft Bearing Company Inc. T: 757-247-6000 www.craftbearing.com

3935

CRC - Cylinder Repair Components T: 251-947-5200 www.crconline.com Creative Systems Inc. T: 360-385-6212 www.GHSport.com Crowley Marine Solutions T: 206-332-8090 www.crowley.com Crystal Group Inc. T: 319-378-1636 www.crystalrugged.com CSM Products Inc.

455

2258

3335

4050

4219

135

10/28/16 5:33 PM

Internat ional Wor kBoat Show T: 815-444-1671 www.csmproductsinc.com CT Marine Inc. T: 207-232-9979 www.CTMarine.com

T: 970-776-6792 www.deif.com 3233

Cummins Inc. T: 800-343-7357 marine.cummins.com

2901

Current Power Solutions T: 281-943-7700 www.currentpsi.com

910

www.donaldsonfilters.com

Delaware Elevator Inc. 1262 T: 757-449-1619 delawareelevator.com/products/marine/ Delgado Community College Maritime & Industrial Training Center 759 T: 504-671-6620 www.dcc.edu/academics/workforce/maritime-fire/

Donna Elison Lacour, Agent New York Life Insurance Company T: 504-569-0509 www.donnalacour.com Donovan Marine Service & Repair T: 504-488-5731 www.donovanmarine.com

440

3517

3827

Donovan Marine Inc. 3512, 3517, 3518 T: 877-366-2366 www.donovanmarine.com

CWR Wholesale Distribution T: 800-527-3306 www.CWRElectronics.com

1359

Dellner Brakes T: 401-515-4657 www.dellner-brakes.com

2011

Cygnus Instruments Inc. T: 410-267-9771 www.cygnusinstruments.com

1416

Delta “T” Systems T: 561-204-1500 www.deltatsystems.com

Downey Engineering Corporation T: 504-818-0377-33 www.downeyengineering.com

900

Derecktor Shipyard T: 914-698-5020 www.derecktor.com

3456

Dr. Shrink Inc. T: 231-723-2685 www.dr-shrink.com

1849

Desco Manufacturing Co. Inc. T: 800-337-2648 www.descomfg.com

3854

Driveline Service of Portland Inc. T: 503-289-2264 www.driveshafts.com Dropsafe T: 008523664 8350 www.dropsafe.com

137

DRYCO T: 866-379-2600 www.drycogroup.com

2856

DSN Latin America T: 786-296-4920 www.doosanla.com

3971

Ducab T: 97148158888 www.ducab.com

3941

Dufour Laskay & Strouse, Inc. T: 504-835-8505 www.portlite.com

1106

Duraflex Inc. T: 877-462-1007 www.duraflexinc.com

2362

D&W Diesel Inc. T: 800-824-0151 dwdiesel.com

221

Daihatsu Diesel (America) Inc. T: 516-822-3483 www.dhtd.co.jp/en/index.html

4008

Dale Fastener Supply T: 713-928-3437 www.dalecompany.com

4204

Dale’s Welding & Fabricators T: 225-659-7206 dalesweldingandfabricators.com/

800

Dex-O-Tex Marine by Crossfield Products Corp. T: 310-886-9100 www.dexotexmarine.com/home

3711

Dickson Marine Supply T: 888-755-0080 www.dicksonmarinesupply.com

1155

1841

Diesel Progress North American T: 262-754-4147 www.dieselpub.com

2311

Damen Shipyards T: +31 (0) 183 65 5777 www.damen.com

4047

Direct Resource Inc. T: 312-566-0810 www.direct-resource.com

4032

Daniel R. Smith & Associates T: 561-842-5704 www.drsa.com

1258

Distribution International T: 225-343-9250 www.distributioninternational.com

1133

Datrex Inc. T: 337-738-4511 www.datrex.com

4021

Dixon Valve T: 800-355-1991 www.dixonvalve.com

3841

DAVI Inc. T: 972-661-0288 www.davi.com

DNV GL T: 291-396-1000 www.dnvgl.com/us

2513

David Clark Company Inc. T: 508-751-5800 www.davidclark.com

3273

1420

Dometic Marine T: 954-973-2477 www.dometic.com/marine

3727

DCL Mooring and Rigging T: 504-944-3366 www.dcl-usa.com

2248

Donald L Blount and Associates T: 757-545-3700 www.dlba-inc.com/

644

Deansteel Manufacturing Company Inc. T: 210-226-8271 www.deansteel.com DEIF

3901

136

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 136

Donaldson Company Inc. T: 952-887-3202

1850

2352

Duramax Marine LLC T: 440-834-5400 www.DuramaxMarine.com

1901

Dustless Blasting T: 713-869-2227 www.DustlessBlasting.com/

701

Dynamat T: 450-662-1803 www.dynamat.qc.ca

4245

Dynamic Castings T: +63323467955 www.dynacast.ph

4005

Eagle Control Systems Inc.

1756

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 5:33 PM

Internat ional Wor kBoat Show T: 225-357-1921 www.ecsbr.com Eagle Industries T: 800-266-8246 www.eagleind.com

1001

East Park Radiator & Battery Shop Inc. T: 985-876-3120 www.eastparkrad.com

1201

Eastern Metal Supply T: 800-343-8154 www.easternmetal.com

4239

Eastern Shipbuilding Group Inc. T: 850-522-7400 www.easternshipbuilding.com

2417

E-Crane International USA T: 419-468-0090 www.e-crane.com

1632

Eden Technology srl T: +39 0497968830 www.edentechnology.it

1362

Electro Plastics Inc./STEP Marine T: 314-426-3555 www.electroplastics.com

1158

Electro-Guard Inc. T: 530-926-4000 www.boatcorrosion.com

3772

Electro-Motive Diesel 2401 T: 708-387-6081 www.progressrail.com/powerproducts Electronic Marine Systems Inc. (EMS MARCON) T: 732-382-4344 www.emsmarcon.com Electronic Power Design, Inc. T: 713-923-1191 www.epdltd.com

2444

3701

E-LED Lighting Inc. T: 561-776-1702 www.e-ledlighting.com

852

Elevating Boats LLC T: 985-386-2053 www.ebi-inc.com

1341

Elliott Bay Design Group T: 206-782-3082 www.ebdg.com

1634

Ellsworth Corporation T: 504-455-4545 www.ellsworthcorporation.com

1854

Ellwood Crankshaft Group T: 724-308-4048 www.elwoodcrankshaftgroup.com

1151

Enfasco Inc. T: 856-662-7660 www.enfasco.com Engine Monitor Inc. T: 504-620-9800 www.emi-marine.com Environmental Marine Inc. T: 606-561-4697 www.envmar.com

1816

428

ERL Commercial Marine Inc. T: 812-948-8484 www.erlmarine.com

1227

Eureka Chemical Company T: 650-761-3536 www.eurekafluidfilm.com

3211

Evac T: 815-639-7725 www.evac.com

2117

Everlux T: 00351233407407 www.everluxmaritime.com

3351

Exergy LLC T: 516-832-9300 www.exergyllc.com

1263

ExxonMobil T: 800-662-4524 www.exxonmobil.com/marine

2919

EZ Hang Chairs T: 615-477-2230 www.ezhangchairs.com

3152

F&M MAFCO Inc. T: 513-367-2151 www.fmmafco.com

3157

FabTek Industries T: +1 206 693 3224 www.fabtekind.com

3881

Fairbanks Morse Engine T: 800-356-6955 www.fairbanksmorse.com

2411

Fairlead Integrated T: 757-312-0574 www.fairleadint.com

3835

Falck Maritime Services T: 504-289-5962 www.falck.com/us

1933

Faria Beede Instruments Inc. T: 860-848-9271 www.FariaBeede.com

2559

Farmers Copper Ltd. T: 800-231-9450 www.farmerscopper.com

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 137

237

813

Farrell and Norton Naval Architects T: 207-563-3210 www.farrellandnorton.com

2151

FarSounder Inc. T: 401-784-6700 www.farsounder.com

1017

Fastenal Company T: 507-453-8842 www.fastenal.com

1659

Faux Pas Prints T: 504-834-8342 www.fauxpasprints.com

3806

FCI Watermakers Inc. T: 801-906-8840 www.fciwatermakers.com

3616

Federal Process Corporation T: 216-464-6440 www.federalprocess.com

4108

Federal Resources Maritime T: 410-643-7810 www.frmaritime.com

1549

FHS Inc. T: 225-673-3585-502 www.fhsinc.com Fibergrate Composite Structures T: 972-250-1633 www.fibergrate.com

245

1154

Fincantieri ACE Marine T: 202-488-4795 www.acemarine.com

627

Fincantieri Bay Shipbuilding T: 920-743-5524 www.bayshipbuilding.com

627

Fincantieri Marine Group T: 715-587-6960 www.fincantierimarinegroup.com

627

Fincantieri Marine Systems North America 341 T: 757-548-6000 www.fincantierimarinesystems.com Fincantieri Marinette Marine T: 202-488-4799 www.marinettemarine.com

627

Fire Fighting Systems AS 2235 T: 225-644-7063 www.inmarsystems.com/fire-fighting-systems-ffs.html Fire Protection Service Inc. T: 713-924-9600 www.fps-usa.com Fireboy-Xintex

1018

2359

137

10/28/16 5:33 PM

Internat ional Wor kBoat Show T: 616-735-9380 www.fireboy-xintex.com

T: 985-643-9341 www.frictionstirlink.com

FireIce Solutions LLC T: 844-342-3347 www.fireicesolutions.com

4158

Firetrol Protection Systems Inc. T: 251-661-1699 www.firetrol.net

1316

Firstwatch Flotation Gear T: 408-955-9806 www.firstwatchgear.com

1611

Fit Up Gear/Romar MEC T: 281-440-1725 www.fitupgear.com

607

Flange Wizard Inc. T: 714-792-1949 www.flangewizard.com

4151

Flex-Weld Inc. T: 815-334-3642 www.flex-weld.com

1950

FLIR Systems T: 877-773-3547 www.flir.com FloScan Instrument Co.,Inc. T: 206-524-6625 www.floscan.com

3735

1805

Flow Safe Supply Inc. T: 832-678-2070 www.flowsafe.com

248

Fluid Power Energy T: 262-548-6220 www.fpevalves.com

1704

Flygt, a Xylem brand T: 704-409-9750 www.flygtus.com

2101

Force Control Industries Inc T: 513-868-0900 www.forcecontrol.com/

1960

FPT Industrial T: 630-481-2912 www.fptindustrial.com

1941

Fraser Optics T: 215-317-2409 fraser-optics.com/

4167

Freedman Seating Company T: 800-443-4540 www.freedmanseating.com

4200

Freeman Marine T: 778-241-6700 www.FreemanMarine.com

1040

Friction Stir Link Inc.

3708

138

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 138

Fronius USA LLC T: 877-376-6487 www.fronius.us

3769

FT Technologies T: 337-254-6336 www.fttechnologies.com

4116

FuelTrax/Nautical Control Solutions T: 281-209-3480 www.fueltrax.com

2754

Fugro Satellite Positioning T: 337-354-4559 www.fugro.com

906

Furuno USA T: 360-834-9300 www.FurunoUSA.com

2027

G.T. Michelli Co. Inc. T: 504-733-9822 www.michelli.com Garibaldi Glass Industries Inc. T: 604-420-4527 www.garibaldiglass.com

4203

841

Garmin USA T: 913-397-8200 www.garmin.com

3171

Garware Wall Ropes Limited T: 7767802836 www.garwareropes.com

4142

GE’s Marine Solutions T: 312-610-8382 www.getransportation.com/marine

3027

GEA North America 2541 T: 201-406-9570 www.gea.com/en/productgroups/centrifuges-separation_equipment/index.jsp Geislinger Corporation T: 269-441-7000 www.geislinger.com Generon, IGS T: 713-937-5200 www.generon.com

3620

333

Genoa Design International Ltd. T: 709-368-0669 www.genoadesign.com

3332

Genuine Marine USA T: 844-436-6274 www.genuinemarine.us

4173

Gerflor T: +33474054000 www.streamobygerflor.com

1458

Gibbs & Cox Inc. T: 504-965-8542 www.gibbscox.com

644

Gilbert Gilkes & Gordon Ltd. T: 44-1539-720028 www.gilkes.com

3115

GKN T: 331-481-1449 www.gkn.com/landsystems

4121

Gladding-Hearn Shipbuilding T: 508-676-8596 www.gladding-hearn.com

1112

Glamox Aqua Signal Corporation T: 281-944-4100 www.glamox.com/GMO

1504

Glendinning Products LLC T: 843-399-6146 www.glendinningprods.com

1604

Global Data Systems T: 337-291-6500 www.getgds.com

741

Global Marine Design T: +61 (0)8 9437 1319 www.marinekits.com

959

Globalstar T: 985-335-1647 www.Globalstar.com

1641

GlobalTec Solutions LLC T: 410-687-5500 www.globaltec-solutions.com

1810

GlobalTech Motor & Controls Inc. T: 281-487-9300 www.globaltechmotors.com

3945

Glosten T: 206-624-7850 www.glosten.com

1353

Gordhead T: 251-725-4888 www.gordhead.com

2837

GOST (Global Ocean Security Technologies) 3670 T: 954-565-9898 www.gostglobal.com Governor Control Systems Inc. Gulf Office 2041 T: 985-626-8707 www.govconsys.com GPLink LLC T: 252-504-5113 www.gplink.com/ Grace Distributing T: 434-825-1529 www.GraceDistributing.com

3905

3958

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 5:33 PM

Internat ional Wor kBoat Show Great Lakes Maritime Academy T: 231-995-1200 nmc.edu/maritime Green Marine & Industrial Equipment Company Inc. T: 504-833-7386 www.greenmarine.com

4205

Hab-Cert LLC T: 504-818-0377 www.hab-cert.com 2117

Grindex Pumps T: 708-781-2135 www.grindex.com

4100

Guarino & Cox LLC T: 985-871-9997 www.guarino-cox.com

2863

Guidance Marine T: +44 116 229 2600 www.guidance.eu.com

3463

Guido Perla & Associates Inc T: 206-768-1515 www.gpai.com

2109

Gulf Coast Shipyard Group T: 228-276-1000 www.gulfcoastshipyardgroup.com

1701

Gulf Coast Yacht Group T: 251-980-2220 www.gulfcoastyachtgroup.com

4009

Gulf Copper & Manufacturing Corporation 1000 T: 281-752-4835 www.gulfcopper.com Gulf Crane Services, Inc. T: 985-400-4660 www.gulfcraneservices.com

T: 337-857-7203 www.h2oinc.com

2117

Gulf Island Shipyards LLC T: 985-917-4790 www.gulfisland.com/shipyards.html

1027

Haley Marine Gears, Inc. T: 662-332-8716 www.haleyinc.com

2352

2221

Hamilton Jet Americas T: 425-527-3000 www.hamiltonjet.co.nz

1733

Hanko’s Metal Works T: 985-385-3310 www.hankos.com

3680

Hannay Reels T: 518-797-3791 www.hannay.com

946

Harken Industrial T: 262-691-3320 www.harkenindustrial.com

4134

Harns Media T: 307-256-9938 www.harnsmedia.com

1104

Harrington Marine T: 269-543-4251 www.harringtonmarine.com

1143

Hatteland Display T: 760-643-4061 www.hatteland-display.com

1658

Hawboldt Industries/ Timberland Equipment Limited T: 902-275-3591 www.hawboldtind.com

Hella marine T: 770-631-7500 www.hellamarine.com

4147

Helm Operations T: 250-360-1991 www.helmoperations.com

1111

Hempel Coatings T: 936-523-6000 www.hempel.us

3615

Henry A. Petter Supply Co. T: 270-575-5039 www.pettersupply.com

2341

Hertz Service Pump & Compressor T: 201-307-2051 www.spump.com

3707

HFW Solutions T: 605-343-3260 www.hfwsolutions.com

4211

Hiller Companies (The) T: 251-661-1275 www.hillerfire.com

1435

Hilliard Corporation (The) T: 607-733-7121 www.hilliardcorp.com

2254

Hilti Inc. T: 800-879-8000 www.us.hilti.com

935

HMS Global Maritime T: 812-941-9990 www.hmsgm.com

4036

3435

Holloway Houston Inc. T: 713-674-5631 www.hhilifiting.com

2440

1617

Honda Marine T: 678-339-2600 www.hondamarine.com

3970

Gulf Marine Repair Corporation T: 813-247-3153 www.gulfmarinerepair.com

2741

Haynes Corporation T: 239-436-1578 www.haynesco.com

1621

3827

Honeywell Hermetic T: 800-900-1778 www.hermeticinc.com

2951

Gummi USA T: 832-482-4830 www.gummiusa.com

Headhunter Inc. T: 954-581-6996 www.headhunterinc.com Heatec Inc. T: 423-821-5200 www.heatec.com

2947

Horizon Shipbuilding Inc T: 251-824-1660 www.horizonshipbuilding.com

2837

1819

Hose Master T: 800-221-2319 www.hosemaster.com

3644

229

Heila Cranes Nederland BV T: +31416651012 www.heila.com

2441

Hose-McCann Communications T: 954-429-1110 www.hosemccann.com

1714

1654

Heinen & Hopman T: +31332992500 www.heinenhopman.com

Hoyt Electrical Instrument Works Inc. T: 1-800-258-3652 www.hoytmeter.com

1603

2548

Helidex Offshore T: 201-636-2546 www.helidex.com

Gunderson Marine T: 800-253-4350 www.gbrx.com

919

Gutteling Americas, Inc. T: 832-598-2004 www.gutteling.com H & E Equipment Services T: 504-394-7400 www.HE-equipment.com H2O Inc

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 139

752

139

10/28/16 5:33 PM

Internat ional Wor kBoat Show

Ingersoll Rand T: 888-782-7824 www.IngersollRandProducts.com

2201

IPU Group T: +4401215110400 www.ipu.co.uk

2010

In-Mar Systems Inc. T: 225-644-7063 www.inmarsystems.com

2235

Iris Innovations USA Corp T: 954-533-9381 www.boat-cameras.com

3855

Innovative Marine Safety Inc. T: 618-254-9470 www.riversafety.net

1451

Irwin Car and Equipment T: 724-864-8900-116 www.irwincar.com Iscola Inc. www.bubbletight.com

2760

Integra Group T: 636-449-3300 www.theintegragroup.com/

138

IsoFlex Technologies T: 954-420-0949 www.isoflextech.com

3833

www.infra-metals.com Hubbell Electric Heater Co. T: 203-378-2659 www.hubbellheaters.com Humphree USA LLC T: 757-374-6381 humphree.com Hydraquip Custom Systems Inc. T: 281-822-5000 www.hydraquip-csi.com

958

3671

521

Hydrasearch Co T: 410-643-7145 www.hydrasearch.com

3841

Hydraulic Marine Systems T: 386-734-0020 www.hydraulicmarinesystems.com

3663

Ian-Conrad Bergan LLC T: 850-434-1286 www.bergan-blue.com

126

IBERCISA T: +34986213900 www.ibercisa.es

1819

ICC Cable Corp. T: 201-482-5750 www.icccable.com

2960

Icom America Inc. T: 425-454-8155 www.icomamerica.com/marine

1613

Ideal Clamp Products Inc. T: 615-686-7826 www.idealtridon.com

3850

IEM Marine T: 904-365-4444 www.iemfg.com/products/marine

1249

Imtra Corporation T: 508-995-7000 www.imtra.com

1417

In-Telecom Consulting T: 985-640-9093 www.in-telecom.com

4119

Intellian Technologies T: 949-727-4498 www.intelliantech.com

3749

Intercontinental Engineering T: 816-741-1526 www.intercon.com International Marine and Industrial Applicators LLC T: 251-300-6659 www.imiallc.com

927

1163

3359

2750

Jason’s Cradle (Land & Marine Products Ltd.) T: 01202 874365 www.jasonscradle.co.uk

2201

Intsel Steel Distributors T: 800-762-3316 www.intselsteel.com

3054

Industrial Air Tool T: 713-477-3144 industrialairtool.com

Inventech Marine Solutions T: 360-674-7019 www.inventechmarine.com

3863

IOW Group LLC T: 985-346-0122 www.iowgroup.com

2541

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 140

Japan Radio Company T: 206-654-5644 www.jrcamerica.com

International Titanium Association T: 303-404-2221 www.titanium.org

Interstate-McBee LLC T: 800-321-4234 www.interstate-mcbee.com

140

1721

Jason Engineering A/S T: +47 32 20 45 50 www.jason.no

1559

3656

Jamestown Metal Marine Sales Inc. T: 561-994-3900-3102 www.jamestownmetal.com

2941

Indoor Air Professionals T: 716-683-3000 www.IndoorAirPro.com

Infra-Metals Co. T: 800-243-4410

3227

International Ship Repair T: 813-247-1118 www.internationalship.com

International Tug & OSV T: +44 1225 868821 www.tugandosv.com

233

434

J H Menge & Company Inc. T: 504-733-4871 www.jhmenge.com

Japan Ship Machinery & Equipment Association T: +81335022041 www.jsmea.or.jp/index_en.html

1853

Industrial Marine Power Engineering Group 217 T: 604-276-8188 www.impeg.com

J A Moody Company T: 610-647-3810 www.jamoody.com

International Paint LLC 1840 T: 516-635-6826 www.international-marine.com/marinehome. aspx

Incat Crowther LLC T: 337-267-1403 www.incatcrowther.com

663

1241

1305

1819

4253

Jastram Engineering T: 604-988-1111 www.jastram.com

1915

Jastram Technologies Ltd. T: 604-988-1111 www.jastramtechnologies.ca

1911

Jerry’s Marine Service T: 954-525-0311 www.jerrysmarine.com

2851

JetMarine Board T: 713-397-2100 www.jetmarineboard.com Jim-Buoy T: 818-761-3516 www.jimbuoy.com

448

1948, 3744

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 5:33 PM

Internat ional Wor kBoat Show T: 920-457-4441 www.kohlermarine.com

www.kaydonbearings.com J-Marine International Co. Ltd. T: 8657455862439 www.impatools.com

3160

JMP Corp. T: 305-677-8330 www.jmpusa.com

3506

JMS Naval Architects T: 860-536-0009 www.jmsnet.com

1013

John Deere Power Systems T: 800-533-6446 www.johndeere.com/marine

2301

John W Gilbert Associates Inc. T: 781-740-8193 www.jwgainc.com

2347

John W. Fisk Company Insurance T: 504-486-5411 www.jwfisk.com

3371

Johnson Brakes/Johnson Industries Ltd. 4202 T: 604-940-4555 www.jbrakes.com Johnson Controls Global Marine T: 305-538-9000 www.jci.com

750

JonRie InterTech LLC T: 609-978-3523 www.marinewinch.com

3505

Jotron USA Inc. T: 713-268-1061 www.jotron.com

2458

Jotun T: 504-394-3538 www.jotun.com/us

3309

JOWA USA Inc. T: 978-486-9800 www.JOWA-USA.com

2450

Kaeser Compressors Inc. T: 540-898-5500 us.kaeser.com/

3909

Kahlenberg Industries Inc. T: 920-793-4507 www.kahlenberg.com

1919

Kalb Corporation T: 855-547-5252 www.kalbcorp.com

602

Karl Senner LLC T: 504-469-4000 www.karlsenner.com

2817

Kaydon/Cooper Bearings T: 231-755-3747

KE Marine Inc. T: 904-354-6566 www.kemarine.com

3455

Kelly's 5 Distribution LLC T: 702-413-6200 https://ks5.us

3740

Kelvin Hughes LLC T: 949-310-0272 www.kelvinhughes.com

3951

Kelvion Inc. T: 985-346-0122 www.kelvion.com/us

2541

KENT Safety Products T: 320-252-2056 www.kentsafetyproducts.com

1761

Key Electronic Solutions T: 504-734-0641 www.keyelectronics.net

1215

Kidde Fire Systems T: 508-881-2000 www.kiddefiresystems.com

810

King Engineering/KING-GAGE Systems T: 855-367-2494 www.king-gage.com

3847

Kismet Rubber Products Corp. T: 706-632-2261 www.kismetrubberproducts.com

3645

Kleeco T: 269-623-2900 www.kleeco.com

1952

Kleven Marine LLC T: 504-466-6268 www.klevenmarine.com

517

Klingspor Abrasives T: 800-645-5555 www.klingspor.com

342

Kloeckner Metals T: 504-947-4215 www.kloecknermetals.com

3310

Kluber Lubrication NA LP T: 800-447-2238 www.klubersolutions.com

913

Kobelt Manufacturing Co. Ltd. T: 604-572-3935 www.kobelt.com

2408

Kocsis Technologies Inc. T: 815-735-7802 www.kocsistech.com

1555

1661 Kohler Marine

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 141

3635

Kongsberg Maritime Inc. T: 713-329-5580 www.km.kongsberg.com

2327

Konrad Marine T: 715-386-4203 www.konradmarine.com

2351

Krill Systems T: 206-780-2901 www.krillsystems.com

3748

Kulite Semiconductor Products T: 201-461-0900 www.kulite.com

955

KVH Industries Inc. T: 401-847-3327 www.kvh.com

1511

Kvichak Marine Industries T: 206-545-8485 www.kvichak.com

3149

La Marche Manufacturing Co. T: 847-299-1188 www.lamarchemfg.com

2149

Laborde Products Inc. T: 985-892-0107 www.labordeproducts.com

2827

Lake Assault Boats T: 715-395-2255 www.lakeassault.com

3271

Langara Fishing Adventures T: 800-668-7544 www.langara.com

1505

Lasdrop T: 810-388-9718 www.lasdrop.com Laser Tools Co. Inc. T: 501-562-0900 www.lasertoolsco.com Lat-Lon T: 877-300-6566 www.lat-lon.com

901

3861

136

Lauderdale Propeller Service T: 800-329-7767 www.lauderdaleprop.com

3360

Lay, Pitman & Associates Inc. T: 904-221-7447 www.laypitman.com

847

LeBlanc & Associates LLC T: 985-876-7982 www.leblancandassociates.com LeBlanc & Theriot Equipment Co. Inc.

2441

1813

141

10/28/16 5:34 PM

Internat ional Wor kBoat Show T: 504-834-1438 www.lebtheriot.com

T: 604-879-2974 www.lo-rez.com

LFS Marine Supplies T: 360-734-3336 www.lfsmarineoutdoor.com

4159

Libra-Plast AS T: +4770095400 www.libra.no

3801

Life Light Technology T: 561-676-4069 www.lifelight.us

963

Liferaft Systems Australia T: 61-3-6273-9277 www.LSAMES.com

950

Lifting Gear Hire T: 800-878-7305 www.lgh-usa.com

3449

Lignum-Vitae Bearings T: 804-337-7169 www.lignum-vitae-bearings.com

3260

Lincoln Electric Company T: 216-481-8100 www.lincolnelectric.com

3341

Liquid Controls T: 847-295-1050 www.lcmeter.com

2358

Llebroc Industries T: 800-284-5771 www.llebroc.com

1748

Lloyd’s Register T: 281-675-3100 www.lr.org

1844

Logan Clutch Corporation T: 440-808-4258 www.loganclutch.com

3321

Lokring Gulf Coast T: 225-938-9242 www.lokring.com

4163

Loksak T: 239-331-5550 www.loksak.com

537

Lotus Chemicals T: 832-647-5999 www.lotuscoatingsystem.com

1754

Louisiana Economic Development T: 225-342-4319 www.opportunitylouisiana.com

1959

LTC T: 316-944-0011 www.ltc-ltc.com

652

Lubriplate Lubricants T: 973-589-9150 www.lubriplate.com

316

Lucas Oil Marine Products T: 800-342-2512 www.lucasoil.com

2107

Ludeca Inc. T: 305-591-8935 www.ludeca.com

3061

Luftex Gears Manufacturing & Services T: 936-635-0855 www.luftexgears.com

1360

Luminell AS T: +4770101070 www.luminell.com

3801

Lumitec LLC T: 561-272-9840 www.lumiteclighting.com

3741

Lynden International T: 281-233-0649 www.lynden.com/lint

2155

Lyon T: 800-323-0096 www.lyonworkspace.com

4216

M&I Electric Industries Inc. Gulf Coast Operations (SCES) T: 228-533-0002 www.mielectric.com M.A.R.S. T: 410-441-0250

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 142

MAN Engines & Components Inc. T: 954-946-9092 www.man-mec.com

3619

Mann & Hummel Purolator Filters T: 919-926-4222 https://www.mann-hummel.com

3962

Maradyne T: 216-362-0755 www.maradyne.com

2304

Marcon International Inc. T: 360-678-8880 www.marcon.com

1402

Maretron LLP T: 602-861-1707 www.maretron.com

1615

Marichem Marigases Worldwide Services 4051 T: +302104148800 www.marichem-marigases.com Marinco Mastervolt T: 800-307-6702 www.marinco.com

3655

641

4247

Magswitch Technology T: 303-468-0662 www.magswitch.com.au

142

3619

Marine Chemists of Louisiana T: 504-416-1852 www.marinechemists.com

1601

Maine Maritime Academy

MAN Diesel & Turbo North America T: 713-780-4200 www.mandieselturbo.us.com

3742

960

2240

1309

2033

Machine Service Inc. T: 864-252-4588 www.machineservice.com

Lopolight T: 215-847-5165 www.lopolight.com

Mammoet T: 281-369-2200 www.mammoet.com

Marine Builders Inc. T: 812-283-7932 www.marinebuilders.com

2459

Lonseal T: 310-830-7111 www.lonsealspecialty.com

3044

3053

517

3953

Malin International Ship Repair & Drydock Inc. T: 409-740-3314 www.malinshiprepair.com

Marine & Offshore Supplies Inc. T: 813-395-6126 www.marineoffshore.net

MacGregor Norway AS T: +47 91 68 60 00 www.macgregor.com

London Offshore Consultants T: 281-987-7400 www.loc-group.com

Lo-Rez Vibration Control Ltd.

T: 207-326-2337 www.mainemaritime.edu

Marine Engine Controls Inc. T: 727-518-8080

4151

2554

130

Marine Equipment Supply T: 251-648-6108 www.mesrentals.com

2855

Marine Exhaust Systems Inc. T: 561-848-1238 www.marine-exhaust.com

2011

Marine Group Boat Works LLC

2751

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 5:34 PM

Internat ional Wor kBoat Show T: 619-427-6767 www.marinegroupbw.com Marine Industries Corporation T: 812-283-5603 www.marineworks.com

2033, 2036

Maven Engineering Corp

Marine Interior Systems LLC T: 985-801-2202 www.marineinteriorsystems.com

1811

Marine Jet Power Inc. T: 614-759-9000 www.marinejetpower.com Marine Learning Systems T: 855-362-7463 www.marinels.com

Master Marine Inc. T: 251-824-4151 www.mastermarineinc.com

3301

1061

Marine Log T: 212-620-7200 www.marinelog.com

705

Marine Rescue Technologies 2556 T: 772-388-1326 www.marinerescuetechnologies.com

606, 610

932

MCCNS T: 521-999-2755-8596 www.mccns.com.mx

123

McDermott Light & Signal T: 718-456-3606 www.mcdermottlight.com

2249

McMurdo Group T: 832-612-7202 www.mcmurdogroup.com

827

MCT Brattberg Inc. T: 281-355-8191 www.mctbrattberg.com

1759

MD Marine Electric T: 253-383-9983 www.mdmarineelectric.com

1561

1045

Marine Systems Inc. T: 985-223-7100 www.marinesystemsinc.com

3101

Measurement Technology NW T: 206-634-1308 www.mtnw-usa.com

2527

Mecc Alte Inc. T: 815-344-0530 www.meccalte.us

941

Marine Technologies LLC T: 985-951-7771 www.marine-technologies.com

2051

Meltric Corporation T: 800-433-2700 www.meltric.com

1533

Marine Travelift Inc. T: 920-743-6202 www.marinetravelift.com

709

Mennekes Electrical Products T: 800-882-7584 www.mennekes.com

4102

Marine Yellow Pages T: 407-380-8900 www.marineyellowpages.com

Maritime Compliance International LLC 2308 T: 504-249-5291 www.maritimecomplianceinternational.com Maritime Executive (The) T: 954-848-9955 www.maritime-executive.com Maritime Reporter and Engineering News T: 212-477-6700 www.marinelink.com

2663

1301, 1305

Metal Shark T: 337-364-0777 www.metalsharkboats.com

3480

MetalCraft Marine Inc. T: 800-410-8464 www.metalcraftmarine.com

3370

Metals USA - Plates & Shapes T: 504-431-7010 www.metalsusa.com

1005

Markey Machinery Company T: 206-622-4697 www.markeymachinery.com

3227

Michigan Wheel T: 616-452-6941 www.miwheel.com

3141

Mascoat T: 713-465-0304 www.mascoat.com

1145

Miller Electric Mfg. Co. T: 920-734-9821 www.MillerWelds.com

1312

Massachusetts Maritime Academy T: 508-830-5000 www.maritime.edu

2360

Miller-Leaman Inc. T: 386-248-0500 www.millerleaman.com Millner-Haufen Tool Company T: 888-365-3301

3641

www.workboat.com â&#x20AC;˘ DECEMBER 2016 â&#x20AC;˘ WorkBoat

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 143

2335

www.millnertools.com Mitsubishi Turbocharger and Engine America Inc. T: 630-268-0750 www.mitsubishi-engine.com/ MMC International Corporation T: 516-239-7339 www.mmcintl.com Mobile Power T: 972-864-1015 www.meps.com Modern Engineered Products Inc. T: 985-893-0909 www.mepinc.net Modutech Marine Inc. T: 253-272-9319 www.modutechmarine.com

2727

1318

645

3361

1963

Mody Pumps Inc. T: 661-392-7600 www.modypump.com

1655

Monico T: 281-350-8751 www.monicoinc.com

1205

Monti Tools Inc. T: 832-623-7970 www.monti-tools.com

4011

Moose Boats Inc. T: 707-778-9828 www.mooseboats.com

3562

Morse Rubber LLC T: 319-524-8430 www.morserubber.com

3227

Moteurs Baudouin T: +33 488 688 695 www.baudouin-engine.com

1941

Motor-Services Hugo Stamp Inc. T: 504-265-8800 www.mshs.com

1941, 2041

Motortronics T: 727-573-1900 www.motortronics.com

4265

Moxie Media Inc. T: 504-733-6907 www.moxietraining.com

1059

MTU T: 248-560-8000 www.mtu-online.com

2601

Murray and Associates LLC T: 954-527-5505 www.murrayna.com

417

Mustang Survival Inc.

2744

143

10/28/16 5:34 PM

Internat ional Wor kBoat Show T: 320-241-9417 www.mustangsurvival.com NABRICO T: 615-442-1300 www.nabrico-marine.com

621

Newmar 1904 T: 714-751-0488 www.newmarpower.com/Marine_Home.html

NACE International T: 281-228-6200 www.nace.org

1404

Nicepower Tech T: 0086-592-6211678 www.nicepowers.com

NAG Marine T: 757-852-3998 www.nagmarine.com

3651

Nichols Brothers Boat Builders T: 360-331-5500 www.nicholsboats.com

Naiad Dynamics T: 203-929-6355 www.naiad.com

427

Nidec Avtron Automation T: 216-642-1230 www.nidec-avtron.com/marine

T: 985-872-5480 www.NrePowerSystems.com

3852

Nudraulix T: 251-471-1591 www.nudraulix.com

3559

1445

Ocean Marine Insurance Agency Inc. T: 401-822-0080 www.omiainc.com Ocean Protecta T: 714-891-2628 www.oceanprotecta.com

4251

Ocean Rodeo T: 888-544-4969-233 www.oceanrodeo.com

3770

Ocean Tug & Barge Engineering Corp. T: 508-473-0545 www.oceantugbarge.com

1044

3357

340

Nakashima Propeller Co. Ltd. T: +6568365015 www.nakashima.co.jp

2335

Niedax Inc. T: 800-544-2105 www.niedaxusa.com

Naniwa Pump Mfg. Co. Ltd. T: +81665416231 www.naniwa-pump.co.jp

1305

Niigata Power Systems T: +81343661226 www.niigata-power.com

2210

Nanni Industries T: +33 (0)556.22.30.60 www.nannidiesel.com

1941

NOAA National Ocean Service T: 337-291-2111 www.nauticalcharts.noaa.gov

Oceanic Consulting Corp. T: 709-722-9060 www.oceaniccorp.com

NOAA National Weather Service T: 228-688-1457 www.vos.noaa.gov/

1405

Oceanwide America Inc. T: 281-987-9600 www.oceanwideamerica.com

3409

Noise Control Engineering LLC T: 978-670-5339 www.noise-control.com

1353

Oil Center Research LLC T: 800-256-8977 www.oilcenter.com

2740

NORIS Group GmbH T: + 49 911 3201-220 www.noris-group.com

3650

Oil States Industries Inc. T: 817-548-4200 www.oilstates.com

National Association of Marine Surveyors - NAMSGlobal T: 281-480-6267 www.NAMSGlobal.org

3936

National Energy Equipment T: 416-206-2200 www.nee.ca

1060

National Maritime Center, USCG T: 888-427-5662 www.uscg.mil/nmc/

3859

National Oilwell Varco T: 713-375-3700 www.nov.com

1544

3407

3808

217

335

Norma Group T: 248-260-8567 www.normaAmericasDS.com

2062

Oilon Burners (Marine) T: 2292009926 www.oilon.com

945

123

Norsafe Marine & Offshore www.norsafemarine.com

517

Omenium SA de CV T: 529992869681 www.omenium.com

744

North American Lifting Equipment T: 330-916-6461 www.efferusa.com

4143

Omnithruster Inc. T: 330-963-6310 www.omnithruster.com

1234

National Specialty Alloys Inc. T: 281-345-2115 www.nsalloys.com

3315

North River Boats T: 541-673-2438 www.northriverboats.com

3571

On Site Alignment T: 985-360-3945 www.onsitealignment.nl

1951

Nautican T: 206-925-3569 www.nautican.com

632

Northern Lights Inc. T: 206-789-3880 www.northern-lights.com

Orbijet Inc. T: 281-218-9400 www.orbijet.com

535

Nauticomp Inc. T: 705-328-2992 www.nauticomp.com NAVY – Program Executive Office (PEO) Ships T: 202-781-0514 peoships.crane.navy.mil Network Innovations T: 954-363-3364 www.networkinv.com

3709

3060

144

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 144

1501

Orca Green Marine LLC (OGM) T: 443-699-6348 www.OrcaGreenMarine.com

3258

Northern Safety & Industrial T: 281-471-3368 www.northernsafety.com

3441

Novurania of America Inc. www.novurania.com

3880

Orca Green Marine Technology Corp. (OGM) 135 www.orcagreen.com

NRE Power Systems Inc.

3217

Orion Coolers T: 931-739-2665

3163

www.workboat.com • DECEMBER 2016 • WorkBoat

11/1/16 12:21 PM

Internat ional Wor kBoat Show T: 281-464-2345 www.performancediesel.com/

www.orioncoolers.com Orttech T: 440-498-7458 www.orttech.com

4002

Otto Trading Inc. T: 949-660-8073 www.irestmassager.com

2954, 4057

Pacific Press Technologies T: 618-262-8666 www.pacific-press.com

4030

PERKO Inc. T: 305-621-7525 www.perko.com

www.pmc-controls.com 1912

Perquimans Marine Industrial Park T: 252-473-5867

545

PG Flow Solutions T: 47-90047014 www.pg-flowsolutions.com

721

ProCurve Glass Technology LLC T: 215-441-9101 www.procurveglass.com

2105

Profax/Lenco T: 281-485-6258 www.profax-lenco.com

2253

Professional Mariner T: 207-772-2466 www.professionalmariner.com

1348

1455

Padgett-Swann Machinery Company Inc. 3040 T: 813-247-3478 www.padgettswann.com

Phelps Dunbar LLP T: 504-566-1311 www.phelpsdunbar.com

4117

Prolumin LED T: 504-941-0307 www.proluminled.com

Palfinger Ned-Deck BV T: 0031 34242 2105 www.palfingerneddeck.com

3518

Phoenix Metals Company T: 770-447-4211 www.phoenixmetals.net

4249

Promat Inc. T: 865-681-0155 www.promat-marine.com

Panel Components & Systems T: 973-448-9400 www.pc-s.com

1660

Phoenix Products Company Inc. T: 414-973-3300 www.phoenixlighting.com

3055

Pruftechnik T: 514-738-6565 www.pruftechnik.ca

647

2950

Panel Specialists Inc./Fipro - Thermax T: 254-774-9800 www.panelspec.com

944

Pilot Marine Products T: 850-893-5730 www.comrod.com

1643

Prysmian Group T: 803-951-1036 na.prysmiangroup.com

801

Panolin America Inc. T: 805-676-1193 www.panolinamerica.com

4135

Pivotal LNG T: 713-300-5116 www.pivotallng.com

2262

PYI Inc. T: 425-355-3669 www.pyiinc.com

3643

1727

Pyrotek T: 509-926-6212 www.pyroteknc.com

3563

Quality Metal Works Inc. T: 504-734-7216 www.qmwinc.net

1717

Paratech Inc. T: 815-469-3911 www.paratech.com

3561

Point Eight Power T: 504-394-6100 www.pointeightpower.com

Parker Systems Inc. T: 757-485-2952 www.parkersystemsinc.com

4150

Point Lighting Corporation T: 860-243-0600 www.pointlighting.com

Parker Village Marine T: 310-608-5600 www.villagemarine.com

2117

Pole Star Maritime T: 207-371-1602 www.psmaritime.com

1460

Quantum Marine Stabilizers T: 954-587-4205 www.quantumhydraulic.com

1701

Passenger Vessel Association (PVA) T: 800-807-8360 www.passengervessel.com

3706

Pompanette T: 603-826-5791 www.pompanette.com

3672

Quest Equipment T: 608-209-7616 www.QuestProtect.com

1510

Patterson Company T: 412-322-2012 www.pattersonmfg.com

1801

Poseidon Barge Corporation T: 866-992-2743 www.poseidonbarge.com

1117

PowerRail Marine T: 305-407-4841 www.epowerrail.com

3954

R&R Rental Services LLC/ Craft Resource Solutions LLC T: 337-519-1813 www.rrrentalservices.com

PPG Protective & Marine Coatings T: 412-434-3082 www.ppgpmc.com

3401

PRIDE Enterprises T: 866-528-2175 www.pride-enterprises.org

2961

Prime Mover Controls Inc. T: 604-433-4644

2653

Pelican Products T: 310-326-4700 www.pelican.com Penny Pockets T: 508-679-5536 www.pennypockets.com

649

1363

PEPCO - Plainville Electrical Products Company T: 860-585-7923 www.PoweredByPEPCO.com Performance Diesel Inc.

1311

3527

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 145

908

4172

R.M. Young Company T: 231-946-3980 www.youngusa.com

3213

R.W. Fernstrum & Company T: 906-863-5553 www.fernstrum.com

2427

Racor Division of Parker Hannifin T: 209-521-7860 www.parker.com/racor Radio Holland USA

2111

2735

145

10/28/16 5:34 PM

Internat ional Wor kBoat Show T: 713-378-2138 https://www.radioholland.com/ Radio Zeeland DMP America T: 954-463-1416 www.rzdmpa.com Rainman Desalination T: 614-124-3967 www.rainmandesal.com

T: 904-503-9733 www.reveresurvival.com 2227

133

RG Rollin Co. T: 253-588-9978 www.rgrsolo.com RGM Inc T: 630-539-5300 www.rgmetals.com

T: 985-395-2444 www.robicheauxinc.com 1232

ROC Carbon Company T: 713-468-7743 www.roccarbon.com

543

Rolls-Royce T: +47 815 20 070 www.rolls-royce.com

3560

2501

RAM Mounts T: 206-763-8361 www.rammount.com

1359

Rhineland Cutlery T: 321-725-2101 www.RhinelandCutlery.com

3950

Rose Point Navigation Systems T: 425-605-0985 www.rosepoint.com

1049

Ramco Manufacturing T: 908-245-4500 www.ramco-safetyshields.com

3755

Rhotheta USA Inc. T: 435-578-1270 www.rhothetaamerica.com

3508

Rotork T: 713-856-5640 www.rotork.com/en/

Ramtec Marine Systems LLC T: 281-334-2904 www.ramtec-marine.com

1053

RIBCRAFT T: 781-639-9065 www.ribcraftusa.com

3363

Rotortug (KST BV) T: 31102010040 www.rotortug.com

3146

351

Rapp Marine T: 206-286-8162 www.rappmarine.com

2241

Rice Nozzles - Metalmec T: 011526699823000 www.metalmec.com.mx

3719

Roxtec T: 800-520-4769 www.roxtec.com

1616

Raytheon Anschütz USA LLC T: 251-597-4408 www.raytheon-anschuetz.com/usa

433

Rice Propulsion T: +52 669 989 2525 www.ricepropulsion.com

3135

Royal IHC T: 713-239-0931 www.royalihc.com

1100

Richard's Restaurant Supply T: 985-868-9240 www.galley.com

1137

RSC Bio Solutions T: 800-661-3558 rscbio.com

551

Recovered Energy Inc. - BOSS Separators 2117 T: 208-637-0645 www.recoveredenergy.com

Rig-a-Lite by AZZ Lighting Systems T: 713-943-0340 www.rigalite.com

1350

Rubicon Group T: 312-513-9563 www.rubgrp.com

4242

Red Fox Environmental Services T: 337-856-3709 www.redfoxenviro.com

2641

Rigid Industries LED Lighting T: 480-655-0100 www.rigidindustries.com

1605

Rustibus Inc (Dalseide) T: 832-203-7170 www.rustibus.com

2205

Reliable Industries T: 504-733-4120 www.reliableindustries.com

2217

Rigidized Metals Corporation T: 800-836-3580 www.rigidized.com

3908

Ryerson T: 866-893-1802 www.ryerson.com

2660

Renishaw Inc. T: 847-286-9953 www.renishaw.com

4209

Rio Controls and Hydraulics Inc. T: 713-923-3205 www.riomarineinc.com/RCH

3541

SAFE Boats International T: 360-674-7161 www.safeboats.com

Renk AG T: +4959717900 www.renk.biz/home-en.html

2041

Rio Marine Inc. T: 713-923-3200 www.riomarineinc.com

3541

Safe Fleet T: 816-293-9040 www.safefleetsolutions.com

4041

Renold Hi-Tec Couplings T: 716-326-3121-226 www.renold.com

1935

Rivertrace Limited T: 1-401-741-0118 www.rivertrace.com

2117

Safeguard Technology T: 330-995-5200 www.safeguard-technology.com

3572

Riviera Maritime Media Ltd. T: +44 (0) 208-364-1551 www.rivieramm.com

2204

Safety Management Systems LLC T: 207-233-9293 www.smsllc.com

1111

Robert Allan Ltd. T: 604-736-9466 www.ral.ca

3146

Sakura of America T: 800-776-6257 www.sakuraofamericaindustrial.com

RCI Technologies T: 909-305-1241 www.rcitechnologies.com

2749

Resolve Engineering Group T: 954-764-8700 www.resolvemarine.com

952

Reuland Electric Company T: 517-540-7322 WWW.reuland.com

2461

Revere Survival Inc.

4109

146

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 146

Robicheaux Manufacturing Inc.

1335

SALA Remote Medics

3980

362

4059

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 5:34 PM

Internat ional Wor kBoat Show T: 907-331-8140 www.salamedics.com

T: 509-332-1890 www.selinc.com

T: 770-455-9110 www.selcousa.com

Sample Brothers Inc. T: 225-929-5177 www.samplebrothers.com

2212

Scienco/FAST, a div of Bio-Microbics Inc. 840 T: 314-756-9300 www.sciencofast.com

Separ Filter T: 954-523-9396 www.separfilter.com

4129

Samson T: 360-384-4669 www.samsonrope.com

2645

SCLTC - Young Memorial Campus T: 985-380-2957 www.coastguardtraining.com

1742

Separator Spares & Equipment LLC T: 985-346-0122 www.separatorequipment.com

2541

Samuel Roll Form Group T: 905-516-9752 www.rollformgroup.com

2761

Scot Forge T: 800-435-6621 www.scotforge.com

2659

Servogear AS T: +47 53 42 39 50 www.servogear.no

3533

Scotchman Industries Inc. T: 605-859-2542 www.scotchman.com

4132

Sevenstar Exceptional Marine Transport T: +31 204488590 www.sevenstar-emt.com

3756

Scott Safety T: 800-247-7257 https://www.scottsafety.com

1052

Shannon Hardware Co. Ltd. T: 985-385-2700 www.shannonhardware.com

1140

Scully's Aluminum Boats T: 985-385-1323 www.scullyboats.com

4180

Shearer Group Inc. (The) T: 281-532-2080 www.shearer-group.com

3154

Scurlock Electric T: 985-868-2253 www.scurlockelectric.com

1159

Sherwin-Williams 1327 T: 800-524-5979 www.sherwin-williams.com/protective

Sea Horse Systems T: 337-984-6130 www.seahorsesys.com

1207

Shin Heung Precision T: -972- 243-9300

451

1110

Ship Architects Inc. T: 251-621-1813 www.shiparch.com

2455

Sea School T: 800-247-3080 www.seaschool.com

4063

Ship Interior Systems T: 541-436-4440 www.shipinteriorsystems.com

3713

Seacoast Associates Inc. T: 407-376-1889 www.seacoastlight.com

1700

ShipConstructor USA Inc. T: 251-340-6200 www.SSI-corporate.com

3640

Seacoast, Genuine Cable Group T: 281-265-0063 www.seacoastusa.com

4170

Ships Machinery International Inc. T: 305-234-5693 www.shipsmachinery.com

1819

Sea-Dog Line T: 425-259-0194 www.sea-dog.com

1810

Shipserv T: 732-738-6500 www.shipserv.com

3047

Sea-Fire Marine T: 410-687-5500 www.sea-fire.com

Shiptracks T: 251-210-1020 www.shiptracks.com

1861

Shockwave Seats T: 250-656-6165 www.shockwaveseats.com

3763

Shouguang Marine Rubber USA T: 907-756-3165 www.smr-fender.com

4131

SHOXS T: 250-652-6003

3071

Sapa Extrusion North America 450 T: 467-222-3807-6 www.sapagroup.com/en/extrusions-startpage/markets-and-applications1/marine-andoffshore/ SatPhoneStore T: 305-405-7173 www.satphonestore.com

1647

Sauer Compressors USA T: 410-604-3142 www.sauerusa.com Sawyer Systems LLC T: 360-574-7809

334

1711

Scan Pacific Marine LLC www.scanpacificmarine.com

517

Scan Pacific Northwest LLC T: 425-355-4652 www.scanpacificnw.com

1349

Scana Propulsion USA Inc. T: 985-778-0614 or 772-224-8889 www.scanapropulsion.com/

3533

Scandia Gear The Americas Corp. T: 832-916-2011 www.scandiagear.com

321

SCANIA T: 210-403-0007 www.scaniausa.com

3201

Schaefer Electronics Inc. T: 508-435-6400 www.schaeferpower.com

3809

Schoellhorn-Albrecht Machine Company 2348 T: 314-965-3339 www.schoellhorn-albrecht.com Schottel Inc. T: 985-346-8302 www.schottel.com Schuyler Companies T: 337-321-4275 www.schuylerco.com

1627

1527

Schweitzer Engineering Laboratories Inc.

851

Seakeeper T: 410-326-1590 www.seakeeper.com Sealite USA T: 603-737-1311 www.sealite.com Sea-Trac Offshore Services T: 504-737-0591 www.seatracoffshore.com Selco USA Inc.

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 147

117

1751

1058

2252

147

10/28/16 5:34 PM

Internat ional Wor kBoat Show www.shoxs.com Siemens T: 800-241-4453 www.usa.siemens.com/marine

1517

Siemens Industry Inc., Building Technologies Division 218 T: 973-593-6513 www.usa.siemens.com/buildingtechnologies Signal Mate T: 410-777-5550 www.signalmate.com

4213

Sika Corporation T: 248-798-0699 www.sikausa.com/marine

1459

Silent Running T: 203-469-1337 www.silentcoating.com

1244

Silver Ships Inc. T: 251-973-0000 www.silverships.com

3263

Simplex Americas LLC T: 908-237-9099 www.simplexamericas.com

1921

Simrad - Navico T: 918-438-8725 pro.simrad-yachting.com/

2635

Sinex Solutions T: 218-722-1076 www.sinexsolutions.com

934

SI-TEX Koden Marine Electronics T: 631-996-2690 www.si-tex.com

1740

SKF T: 267-436-6800 www.skf.com/marine

1541

SkimOIL--Bilge Water and Fuel Doctors T: 314-579-9755 www.skimoil.com

426

Skipper Engineered Products 3517 T: 504-488-5731 www.donovanmarine.com/Donovan/skipper_files Smith Berger Marine Inc. T: 206-764-4650 www.smithberger.com

3227

Society of Accredited Marine Surveyors T: 800-344-9077 www.marinesurvey.org

1407

Society of Maritime Industries T: +44 -0-20 7448 7021 www.maritimeindustries.org

3601

148

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 148

Solar Boat Shades LLC T: 504-615-5833 www.solarboatshades.com Solberg Crankcase Ventilation Systems T: 630-616-4400 www.solbergmfg.com Solcon USA T: 724-473-1301 www.solconusa.com

749

3917

853

Sonetics Corporation 1744 T: 503-684-7080 www.soneticscorp.com/industries/marine/ SOTEC T: 504-733-3337 www.sotecfire.com

1321

Sound Propeller Services T: 206-788-4202 www.soundprop.com

1141

Soundown Corporation T: 978-745-7000 www.soundown.com

2940

Southland Reach Rods T: 985-876-0290 www.southlandreachrods.com

2016

Southwest Wire Rope T: 713-453-8518 www.swwrinc.com

3604

Spear Power Systems T: 816-527-9200 www.spearps.com

2648

Spinlock USA T: 401-619-5200 www.spinlock.co.uk/commercial

1259

Sponge-Jet Inc. T: 603-610-7950 www.spongejet.com

4026

Springfield Marine T: 417-725-2667 www.springfieldgrp.com

1746

Spurs Marine Manufacturing Inc. T: 954-463-2707 www.spursmarine.com

350

SSPC: The Society For Protective Coatings 1554 T: 412-281-2331 www.sspc.org Stability Solutions Inc. T: 604-328-5455 www.stabilitysolutions.com

216

Standard Calibrations Inc. T: 757-549-6534 www.standardcal.com

635

Standard Crane & Hoist LLC T: 985-725-1989 www.standardcrane.com

2162

Standard Horizon T: 714-827-7600 www.standardhorizon.com

2848

STAR Center T: 954-920-3222-201 https://www.star-center.com

317

Stationary Power Systems T: 877-924-4949 spsystems.net

4152

Stearns Safety & Survival T: 316-832-2981 www.stearnsflotation.com

3251

Steel of West Virginia Inc. T: 304-696-8207 www.swvainc.com

3933

Stewart & Stevenson 2517, 2617 T: 713-751-2700 www.stewartandstevenson.com Steyr Motors T: 850-784-7933 www.steyr-motors.com

2827

STI Marine Firestop T: 908-526-8000 www.stimarine.com

3570

Stone Marine Group T: +44 (0) 1489 890749 www.stonemarine.co.uk StoneL T: 218-737-0701 www.stonel.com Straub Pipe Couplings T: 619-336-0400 www.straub-couplings.com

902

2860

634

Strongarm Designs T: 215-443-3400 Web:

4207

Stucke Group T: +49402274680 www.stuckegroup.com

3650

Subsalve Usa Corporation T: 401-884-8801 www.subsalve.com

228

Sulzer Turbo Services T: 504-392-1800 www.sulzer.com

940

Summit Electric Supply, Marine Division 2555 T: 504-535-2600

www.workboat.com • DECEMBER 2016 • WorkBoat

10/28/16 5:34 PM

Internat ional Wor kBoat Show

Sunbelt Supply Company T: 713-672-2222 www.sunbeltsupply.com

1441

Tech Development T: 937-918-2710 www.tdi-turbotwin.com

2135

SUNY Maritime College T: 718-409-2856 www.sunymaritime.edu

3510

Techcrane International LLC T: 985-871-0056 www.techcrane.com/ Technical Marine Service - Levelcom T: 503-285-8947 www.tms-usa.com

3927

2955

3507

Technology Associates Inc. T: 504-282-6166 www.TAIEngineers.com

2735

Superior Shipyard & Fabrication Inc. T: 985-475-6441 www.superiorshipyard.com/

550

Techsol Marine T: 418-688-2230 www.techsolmarine.com

3649

Supreme Integrated Technology Inc. T: 504-464-0528 www.sitech-us.com

521

Teekay Couplings T: -44-1494-679500 www.teekaycouplings.com

3421

Sure Marine Service Inc. T: 206-784-9903 www.suremarineservice.com

349

Tees White Gill Thrusters T: 441287650621 www.teesgillthrusters.com

4238

Survitec Group T: 330-239-9710 www.survitecgroup.com

1448

Teknotherm Inc. T: 206-632-7883 www.teknotherm-inc.com

1244

SWOS T: 713-671-9101 www.swos.net

1304

Temp-Coat Brand Products T: 985-875-2471 www.tempcoat.com

555

SynDeck Marine T: 562-236-1170-318 www.syndeckmarine.com

1253

Tenmat Inc. T: 302-633-6600 www.tenmat.com

432

Taisei Engineering Consultants Inc. T: 81-3-3667-6633 www.articouple.com

2561

Tero Marine AS T: +4755904300 www.teromarine.com

Takashina Life Preservers Co Ltd T: +81665683512 www.tlpc.co.jp

1305

Teufelberger Fiber Rope Corporation T: 508-730-4524 www.teufelberger.com

Talfri Brakes Co., Ltd. T: 868-518-6612-409 WWW.TALFRI-BRAKE.COM

2952

Texas A&M Maritime Academy T: 409-740-4887 www.tamug.edu

www.summit.com/marine

SuperFlow Products T: 713-900-3515 www.superflowproducts.com Superior Energies Inc. T: 409-962-8549 www.insulationsei.com

751

Tampa Yacht Manufacturing/ Tampa Defense USA/Tampa Defence UK 3960 T: 714-673-8118 www.tampa-yacht.com Taylor Made Systems T: 518-773-9431 www.taylormadesystems.com

3662

Teakdecking Systems Inc. T: 941-756-0600 www.teakdecking.com

3959

3932

264

TFT-Pneumatic T: 713-862-4851 www.tft-pneumatic.com

3470

The Safariland Group T: 413-445-4000 www.protecharmored.com

3369

Thermamax Inc. T: 630-340-5682 www.thermamax.com

1358

Thermcor Inc. T: 757-622-7881 www.thermcorinc.com

2063

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 149

1406 Thermogenics T: 905-727-1901 www.thermogenicsboilers.com

2117

Thomas Tank Barge Inc. T: 409-744-5505 www.bargebuilder.com

3812

Thoma-Sea Marine Constructors LLC T: 985-853-0620 www.thoma-sea.com

909

Thordon Bearings Inc. T: 905-335-1440 www.thordonbearings.com

2032

Thrustmaster of Texas Inc. T: 713-937-6295 www.thrustmaster.net

1635

Tidal Marine Insurance T: 800-282-6247 www.tidalmarineins.com

3712

Tides Marine Inc. T: 954-420-0949 https://www.tidesmarine.com

3607

Tiger Offshore Rentals T: 409-832-9336 www.tigeroffshorerentals.com

2956

TIMCO Industries Inc. T: 812-945-8988 www.timcomarine.com

1221

Timken Corporation T: 800-661-5568 www.timken.com

4056

TMS Levelcom T: 503-285-1379 www.levelcom.net

3297

Torqeedo T: 815-444-8806 www.torqeedo.com/us

4144

Total Control Systems T: 800-348-4753 www.tcsmeters.com

1815

Total Marine Solutions Inc. T: 954-327-2032 www.tms-fla.com Total Piping Solutions T: 716-863-1207 www.tps.us Towing Vessel Inspection Bureau T: 636-778-9772 www.thetvib.org Tradequip International T: 800-251-6776

318

4014

320

3413

149

11/3/16 3:47 PM

Internat ional Wor kBoat Show www.tradequip.com Tradesmen International LLC 2933 T: 228-369-0525 www.tradesmeninternational.com/marine

T: 800-223-8050 www.vartechsystems.com

Ullman Dynamics USA T: 757-383-8385 www.UllmanDynamics.com

3671

VDL Klima T: +31402981818 www.vdlklima.com

1819

4229

Transas Americas Inc. T: 425-486-2100 www.transas.com

1021

Ultra Marine West/Quickline T: 714-843-6964 www.quickline.us/

4156

VDO Instrumentation (Continental) T: 610-289-0488 marine.vdo-gauges.com/

1606

Transport Systems and Products Inc. T: 203-656-1644 www.tspmarine.com

1250

Ultra-SoniTec LLC T: 828-404-3112 www.ultra-sonitec.com

1213

Veethree Electronics and Marine LLC T: 941-538-7775 www.v3instruments.com

3813

UMC Marine T: 714-437-9600 www.umcmarine.com

3801

1712

Ventiq AS T: +47 700 26540 www.ventiq.com

1219

United States Marine Inc. T: 228-679-1005 www.usmi.com

4071

Veotec T: 952-582-4918 www.veotecamericas.com

2227

2741

Verhaar Omega BV T: +31252745300 www.verhaar.com Versitec Marine & Industrial T: 905-834-5566 www.versitec.ca

2211

Vesconite Bearings T: +27 116 161 111 www.vesconite.com

2861

Tranter Inc. 2427 T: 906-863-5553 www.fernstrum.com/products/tranter/ Travelers Indemnity Company T: 732-321-5623 https://www.travelers.com/ocean Tribco Inc. T: 216-486-2000 www.tribco.com

332

327

United States General Services Administration (GSA) T: 404-331-3052 www.gsaauctions.gov

Trident Marine Inc. T: 724-745-9311 www.tridentmarine.com

1917

Universal Environmental Solutions T: 813-241-9206 www.uestampa.com

Trident Maritime Systems T: 228-407-1200 www.tridentllc.com/

3241

Unlimited Control & Supply Inc. 2854 T: 985-223-9331 www.unlimitedcontrolandsupply.com

Trindgroup T: 334-246-1535 www.trindgroup.com

2244

US Hoists Corporation T: 631-472-3030 www.ushoists.com

Trinidad & Tobago Oil & Gas Association 2658

US Maritime Administration www.marad.dot.gov

4271

252

Vesper Marine T: 858-405-5810 www.vespermarine.com

758

827

Trinity Wire LLC T: 985-868-4590 www.trinitywirellc.com

1148

US Rigging/Pelican Rope Works T: 714-545-7444 www.usrigging.com

3946

Vetus Maxwell T: 410-712-0740 www.vetus.com

1507

Uzmar Workboat and Tug Company T: 902623414510 www.uzmar.com

2141

Victaulic Company T: 610-923-3115 www.victaulic.com

1352

Triple Son Wholesale Timbers T: 985-693-6829 www.tripleson.net

Viega LLC T: 316-425-7400 www.viega.us

1101

Tsurumi Pump T: 630-793-0127 www.tsurumipump.com

953

ValvTect Petroleum Products T: 847-272-2278 www.valvtect.com

Tube-Mac Piping Technologies T: 905-643-8823 www.tube-mac.com

859

Van der Velden Marine Systems www.vdvelden.nl

1819

Vanmarc Shipping Limited Company T: 757-204-1204 www.vanmarcshipping.com

4104

TWG Canada - LANTEC and Pullmaster Brands 3714 T: 604-547-2100 www.team-twg.com

559

Vigor T: 206-623-1635-861 www.Vigor.net

3149

Vision X Lighting T: 888-489-9820 www.visionxusa.com

4159

VMS Vansteen Marine Supply T: 713-674-3300 www.vansteen.com

3851

3001

Vanuatu Maritime Services Ltd. T: 212-425-9600 www.vanuatumaritimeships.com

808

Twin Disc Inc. T: 262-638-4000 www.twindisc.com

Voith Turbo Inc. T: 717-767-3200 www.voithturbo.com/marine

2435

2057

Vard Marine Inc. T: 604-216-3375 www.vardmarine.com

527

UES Seating T: +61238071200 www.uesseating.com

150

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 150

Vartech Systems

1645

Volvo Penta

2001

www.workboat.com â&#x20AC;˘ DECEMBER 2016 â&#x20AC;˘ WorkBoat

10/28/16 5:35 PM

Internat ional Wor kBoat Show T: 757-436-2800 www.volvopenta.com

T: 906-863-5553 www.fernstrum.com/products/weka-boxcooler/

VT Halter Marine Inc. T: 228-696-6888 www.vthm.com

2715

W&O T: 904-354-3800 www.wosupply.com

2017

W A Technical Sales Inc. T: 228-452-3004 www.watechsales.com

3801

Wager Company T: 336-969-6909 www.wagerusa.com

1041

WAGO Corporation T: 800-346-7245 www.wago.us

903

Walker Magnetics T: 508-853-3232 www.walkermagnet.com

1862

Weldon T: 614-529-7230 www.weldoninc.com West Craft Manufacturing T: 936-674-5405 www.westcraftmfg.com

2762

250

West Mekan 2235 T: 225-644-7063 www.inmarsystems.com/west-mekan-passenger-seating.html Western Branch Metals Inc. T: 757-215-1500 www.wbmetals.com

1910

WheelHouse Technologies Inc. T: 401-575-6782 www.wheelhousetech.com

3848

1651

Walther Electric Inc. T: 732-537-9201 www.waltherelectric.com

3814

Whiffletree Corporation T: 207-647-3300 www.whiffletech.com

Wandfluh of America Inc. T: 847-566-5700 www.wandfluh-us.com

521

Whiting Door Manufacturing Corporation 3411 T: 716-542-5427 www.whitingdoor.com

Wartsila T: 281-233-6200 www.wartsila.com

601

Washburn & Doughty Associates Inc. T: 207-633-6517 www.washburndoughty.com Washington Chain & Supply Inc. T: 206-623-8500 www.wachain.com

2651

1420, 3227

Williams Machine Works T: 228-712-2667 www.williamsmachineworks.net

606

Williams Metals and Welding Alloys Inc. T: 877-499-1544 www.wmwa.net

811

WindTrans Systems Ltd. T: 519-527-2475 www.windtrans.ca

4015

Wing Inflatables Inc. T: 707-826-2887 www.wing.com

3257

Water Weights Inc. T: 877-363-1200 www.waterweightsinc.com

3050

Watermakers Inc. T: 954-467-8920 www.watermakers.com

1855

www.winteb.nl 1255

Waterways Journal Inc. T: 314-241-7354 www.waterwaysjournal.net

1314

Wintech International LLC T: 318-929-1242 www.wintech-winches.com

3762

Waveguide Communications T: 954-782-9898 www.wgc-usa.com

4164

Wintron Electronics T: 732-449-4850 www.wintronelectronics.com

1962

WEG Electric Corp T: 678-249-2000 www.weg.net/us

2206

WireCo WorldGroup T: 816-270-4700 www.WireCoWorldGroup.com

2427

WISKA Hoppmann & Mulsow GmbH T: +49-4191-508-0 www.wiska.com

Weka Boxcoolers B.V.

Winteb BV

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 151

1951

Wolseley Industrial T: 615-316-1800 www.wolseleyindustrialgroup.com

817

Wooster Products Inc. T: 330-264-2844 www.wooster-products.com

806

World Marine LLC T: 251-338-7034 www.worldmarine.com

2627

WPT Power Corporation T: 940-761-1971 www.WPTpower.com

805

Wynn Marine Ltd. 2235 T: 225-644-7063 www.inmarsystems.com/wynn-marinewipers.html Wynne Enterprises Inc. T: 256-383-5040 www.wynneinc.com

936

XTronica AS T: +4773797290 xtronica.no

3801

Yale Cordage T: 207-282-3396 www.yalecordage.com YANMAR America Corporation T: 770-877-9894 us.yanmar.com

2841

2927

ZAZZ Engineering Inc. T: 561-594-0123 www.zazzengineering.com

2845

Zenitel Marine USA T: 504-952-2817 https://www.zenitel.com/

3551

ZF Marine Propulsion Systems T: 954-441-4040 www.zfmarinecc.com/cwb

3327

Zhejiang Maide Machine Co. Ltd. T: 008613868655878 www.mai-de.com

3660

Zodiac of North America Inc. T: 410-643-4141 www.zodiacmilpro.com

4045

Zormot International Inc. T: 800-459-5422 www.zormot.com

4110

4267

151

10/28/16 5:35 PM

Wor kBoat Show American Vulkan Corporation Booth #3817

VULKARDAN F The highly flexible VULKARDAN F is the successor of the well-established VULKARDAN E. Characterized by a very compact, lightweight and cost efficient design, the VULKARDAN F is made for free standing installations in main propulsion, auxiliary drives and power generation. www.vulkanu.com Delta T Systems, Inc. Booth #2011

Dry Exhaust By DINAK Delta T Systems has teamed up with DINAK to offer turnkey modular dry stack diesel exhaust systems for inland and offshore workboat applications. Insulated components that clamp together in pre-engineered designs provide substantial savings in weight, cost and installation time for the builder. www.deltatsystems.com Delta T Systems, Inc. Booth #2011

SLIMLINE A-60 Rated Marine Fire Dampers The new SLIMLINE A-60 rated fire damper has been designed specifically for marine workboat applications in engine rooms and other A-60 rated spaces. This USCG/ MED approved damper is built from 316 stainless steel and is available in 28 standard sizes or in custom configurations up to 46"x46". www.deltatsystems.com

152

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 152

New Produ

cts

Ducab Booth #3941

Force Control Industries, Inc. Booth #1960

MarineBICC - For ship wiring applications suitable for all shipboard and marine applications. - Available in fire resistance design. - All materials are halogen-free. - XLPE stands for cross-linked polyethylene compound. - Excellent mechanical and electrical characteristics. www.ducab.com Exergy Booth #1263

Titanium Shell & Tube Heat Exchanger Exergy’s titanium heat exchangers are manufactured in 100% Commercially Pure (CP) Titanium. Unalloyed CP Titanium is available in four grades: 1, 2, 3, and 4 which are used based on the corrosion resistance, ductility and strength requirements of a specific application. www.exergyllc.com FloScan Booth #1805

TaxLog Feature for FloNET DataLog System NEW TaxLog Feature accurately computes fuel consumption for Inland Waterways Revenue Act fuel tax compliance. DataLog will automatically begin recording fuel consumed by the propulsion engines upon entering any one of the 27 taxable zones and stop immediately upon exiting. CSV report compatible. www.floscan.com

MagnaShear Hazardous Duty Motor Brake The new MagnaShear hazardous duty motor brakes meet Class I and Class II Div 2 specifications. Oil shear technology provides five to 10 times longer service life with virtually no maintenance and no adjustment needed. It has a quick mount totally enclosed design for marine duty applications. Visit Booth #1960. www.forcecontrol.com Harken Industrial Booth #4134

Work Securely and Safely - The TR31Tight Radius rail and trolley system works as an adjustable anchorage point for fall restraint on marine vessels. Rails have straight, curved, 200-mm radiused bends that change direction in horizontal/ vertical planes. Trollies run smoothly around tight radii/joint. www.harkenindustrial.com McMurdo Booth #827

OmniCom Workboat, McMurdo's next-gen fleet management solution, connects ships to shore-side operations with 100% global coverage. Linked with McMurdo PRISMA software platform, OmniCom Workboat raises productivity with worldwide monitoring, messaging and reporting via 3G/Iridium least-cost routing. www.mcmurdogroup.com

www.workboat.com • DECEMBER 2016 • WorkBoat

11/7/16 4:42 PM

Wor kBoat Show PRUFTECHNIK Inc. Booth #2950

ROTALIGN touch is the first cloudenabled touchscreen laser shaft alignment system with integrated mobile connectivity. 3-D display animations and wizard guidance make the alignment experience as easy as using a tablet and it is fully designed to meet the requirements of the smart factory. www.pruftechnik.com Round Ground Metals, Inc. Booth #543

BOAT SHAFT - Consistent, high-quality shaft increases your efficiency. Improved efficiency leads to increased revenue. - Up to 12" diameter - Straightness 0.0015" TIR/FT - Roundness 1/2 diameter tolerance - Surface finish 32 RA or better - Parts Produced: 316L, 17-4, 1018, 2205 www.rgmetals.com Roxtec, Inc Booth #1616

The Roxtec SPM is a lightweight, non-weld seal that can be used with metal pipe. It is quick and easy to install from only one side of steel decks or bulkheads and maintains a tight seal around the pipe, even in irregular openings. Indicators show when full compression is achieved. www.roxtec.com

RSC Bio Solutions Booth #551

FUTERRA High Performance Hydraulic Fluid (HF) Series, a revolutionary product line of Ecolabel certified lubricants, is a durable Environmentally Acceptable Lubricant (EAL). This renewable hydrocarbon outperforms other EALs while meeting global environmental regulations. With a 10-year limited warranty, this EAL provides peace of mind. rscbio.com Teekay Couplings Limited Booth #3649

The new, patented Teekay Axilock Fire Proof Coupling includes a unique internal fireproof sleeve that cannot be lost, damaged or removed. It easily withstands a hydrocarbon flame test at more than 800 degrees, after which the internal gasket still looks like new. See the video: http://bit.ly/2cgQaII www.teekaycouplings.com VDO Instrumentation (Continental) Booth #1606

VDO AcquaLink is an advanced, NMEA 2000 based engine monitoring and navigation system complete with sensors, displays, gauges and the powerful VDO Nav Box that is an Analog/ J1939/NMEA 0183 and NMEA 2000 gateway that can tie all engine, navigation and operation inputs into a combined network. www.marine.vdo-gauges.com

www.workboat.com • DECEMBER 2016 • WorkBoat

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 153

New Produ

cts Viega LLC Booth #1101

Viega’s MegaPress Stainless, an innovative pipe fitting for 304 and 316 stainless steel Sched 10 and 40 pipe. Viega manufactures and distributes the world's best shipbuilding and offshore flameless pipe joining systems. See MegaPress Stainless and tour the Viega Promotion Truck in booth #1101. www.viega.us Vision X Lighting Booth #4159

AC SOLO CUBE LAMP 10-watt or 60-watt junction box cube light allows you to convert a standard AC box to a working light fixture. With four conduit openings you can add light to any area within your current conduit network. The cube light offers either PC or Glass curved lens, 180-degree beam angle and is IP69K rated. www.visionxusa.com W&O Supply Booth #2017

The G&O Bioreactor is a sewage treatment system that can handle all grey and black waste water without consumables such as filters, membranes or chemicals. The system is operating in more than 260 vessels and has an excellent track record. www.wosupply.com

153

11/7/16 4:42 PM

Wor kBoat Show W&O Supply Booth #2017

W&O SternSeal is a Flax Fiber braided packing designed specifically for the marine industry for use in stern tubes, post and rudder seals and cold water gasket and hatch applications to keep water from leaking into the vessel. www.wosupply.com W&O Supply, Inc. Booth #2017

Sperre Shell & Tube Sperre has specialized its production of heat exchangers to enable customized solutions based on standard heat exchanger models. Sperre offers more than 200 standard models of shell and tube heat exchangers with cooling surfaces from 0.2 to 350 m2. www.wosupply.com

New Produ

cts

WindTrans Systems Ltd Booth #4015

ZELDA pumps 90 gpm by hand, 300 gal./250 rpm. Weighs 45 lbs., selfprimes lifts 27'. Zelda is ideal for oil spills, toxic and chemical cleanup. Operates efficiently forward or reverse — able to flush lines running in reverse. Zelda available with gas, diesel, hydraulic and pneumatic driven powered platform www.windtrans.ca

• Stiff enough to push under objects • More durable than traditional fiber slings • One person able to lift eye to crane hook • Will not corrode www.yalecordage.com/fortis2sling/

Yale Cordage Booth #2841

Fortis2 Heavy-lift multipart slings are made with our Unitrex XS Max Wear synthetic cable. • 80% lighter than a comparable wire rope sling

Nov. 3 0 - De c. 2 , 2 016 Er nest N . Mo rial Co nvention Ce nter New O rleans

Show H ours:

Diversified Communication

Tuesday 10 am – 5 :30pm Wednesday 10 am – 5 :30pm Thursday 10 am – 3 pm Visit w ww.workboatshow.com for t he m ost u p-to-date i nformation about t he s how

154

WB_IWBS_ConferenceListingsProducts_2016_LINO.indd 154

www.workboat.com • DECEMBER 2016 • WorkBoat

11/7/16 4:42 PM

NOV. 30 - DEC. 2, 2016

NEW ORLEANS Morial Convention Center Halls B, C, D, E & F Presented by Produced by

EVERYTHING Y O U NEED

T O P OW E R F OR W A R D

Everything Y O U R BU S I N E S S needs to power forward, now in the palm of your hand. Download the official International WorkBoat Show mobile app for up–to–the–minute information to help you make the most of the largest commercial marine tradeshow in North America. Featuring a 3D exhibit floor map to help you find the xhibitors you are here to see, an easy to filter s hedule of everything happening across all three days and comprehensive lists of exhibitors and new products you can reference both during and after the show. U s e r f r i e n d l y , e a s y to n a v i g a te a n d f e a tu r i n g b oa tl oa d s of i n f or m a ti on , the I n te r n a ti on a l W or k Boa t S how M ob i l e A p p ha s a r r i v e d .

WB_FULLS.indd 155

The International WorkBoat Show Mobile App is available as a free download for both Apple and Android devices.

workb oatshow.com

11/2/16 9:44 AM

PortofCall

Your

Sour ce F or E mployment, E qui

pme

nt & S ervic es

EM PLOYMENT

MARINE G EAR

IMMEDIATE OPENINGS: Captains, Mates, Engineers, AB’s and Deckhands Dann Ocean Towing is A leading provider of marine towing services, serving the Eastern Seaboard, Gulf of Mexico, Caribbean and beyond. To Apply Please Visit www.DannOceanTowing.com 3670 S Westshore Boulevard Tampa, FL 33629

Seabulk Towing, Inc. is an established leader in harbor ship assist operations and towing services. We are regularly seeking talented crew and shoreside professionals to join our successful and rewarding team. We offer a competitive compensation package and support career advancement. Please visit the careers section of our website www.seabulktowing.com for our current opportunities. Equal Opportunity Employer/Vet/Disability.

Lake Superior Cabs, Inc.

Phone (813) 251-5100

Building Pilot Houses, Equipment Cabs and Control Houses since 1992

, a dynamic energy service company located in Houma, LA, is now accepting resumes and applications for

www.lakesuperiorcabs.com 121 W. Harney Rd Esko, MN Toll Free: 800-328-1823 Fax: 218-879-4640 Dean Myers LSCABS@aol.com

• •

BARGE PUMPS

• • • •

(must be proficient in cooking for Malaysia & Thailand personnel)

Please send resumes to or apply in person at:

A R M S T R O N G M A R IN E IS H IR IN G !

We are looking for motivated individuals that are committed to excellence & looking for a dynamic career in the international marine industry.

inform

Pleas

e contac ation: jenac@rm

t our

Director s trongm

for m ore arine. com

IMO ROTARY SCREW ASPHALT PUMPS BYRON JACKSON TURBINE PUMPS BLACKMER ROTARY GEAR PUMPS

E-mail

OUR 110TH YEAR EOE, AAE, M/F

DUVIC’S PUMPS “Greater Downtown” HARVEY, LA 70059 Box 1237 • 504-341-1654 PH/FX

156

WB16_Classifieds_December.indd 156

www.workboat.com • DECEMBER 2016 • WorkBoat

10/31/16 9:45 AM

To advertise pl ease c ontac t J ef f Powel l • 207-842-5573 • jpowel l@divc om.com MARINE G EAR &

SU PPLIES

TANK BARGE CARGO EQUIPMENT Have you thought about the accomplishment you have made by obtaining a Captain’s License? The many hours of study and time at sea?

1-800-584-0242

BYRON JACKSON CENTRIFUGAL BARGE PUMPS: FOR LIGHT AND MEDIUM PRODUCTS.

LEISTRITZ ROTARY SCREW BARGE PUMPS: FOR HEAVY PRODUCTS.

SHAMOSH EQUIPMENT CORP.

Authorized Marine Sales Agent BYRON JACKSON - FLOWSERVE LEISTRITZ CORPORATION VOLCANIC HEATER, INC.

Now Manufacturing and Installing Fire Retardant Bunk Curtains

LEISTRITZ HORIZONTAL VOLCANIC DECK MOUNTED BARGE HIGH EFFICIENCY PUMPS. HOT OIL HEATERS.

449 Eton Street - Englewood, NJ 07631 PH: 201-871-6898 • FX: 201-871-6895 EM: smshamosh@gmail.com Engineered Equipment since 1979

We are a Custom Manufacturer of Wheelhouse Tinted Shades & Crew Quarter Blackout Shades

We custom build every shade to fit each window in our facility. They are Incredibly durable, driven by over-sized clutches and operated by a stainless steel pull chain.

TANK TENDER

We offer measurement and installation services in Southern Louisiana, Mississippi and Alabama. We carry $5,000,000 workers’ compensation, and liability insurance policies with U.S.L.&H. and the Jones Act. ™

TANK THETENDER ORIGINAL

PRECISION THE ORIGINAL PRECISION TANK MEASURING SYSTEM! TANK MEASURING SYSTEM! Accurate tank Accurate tank soundings have soundings have TANK TENDER ™ never been easier Accurate tank never been easier when one TANK when one TANK TENDER monitors soundings have upTENDER to ten fuel and monitors up to ten fuel water tanks. never been easier Reliable andnon-water tanks. Reliable nonelectric and easy when one TANK to install. electric and easy to install.

Download our order form to purchase your shades today.

Contact: Edward Kass III | 504-615-5833 | ekass@solarboatshades.com | www.solarboatshades.com

™

TANK TENDER ™

TANK 1 TANK 2 TANK 3 TANK 4 PUMP

Push button in and hold, pump slowly. Do not test with deck fill pipe full. Pressure over red line may damage gauge.

™

HART SYSTEMS, INC. Gig Harbor, Washington

TENDER monitors

up to ten fuel and HART SYSTEMS, INC.

HART SYSTEMS, INC.

253-858-8481 FAX 253-858-8486 www.TheTankTender.com

water tanks.

253-858-8481 FAXReliable 253-858-8486 nonwww.TheTankTender.com electric and easy

TANK 1 TANK 2 TANK 3 TANK 4 PUMP

Push button in and hold, pump slowly. Do not test with deck fill pipe full. Pressure over red line may damage gauge.

™

HART SYSTEMS, INC. Gig Harbor, Washington

to install.

HART SYSTEMS, INC. 253-858-8481 FAX 253-858-8486 www.TheTankTender.com

Keel Coolers Trouble free marine engine cooling since 1927!

THE WALTER MACHINE CO, INC Tel: 201-656-5654 • Fax: 201-656-0318 www.waltergear.com

www.workboat.com • DECEMBER 2016 • WorkBoat

WB16_Classifieds_December.indd 157

157

10/31/16 9:46 AM

PortofCall

Your

Sour ce F or E mployment, E qui MARINE G EAR &

pme

nt & S ervic es

SU PPLIES

INDUSTRIAL PLASMA MACHINES FOR SHIPYARDS Profile Cutting Systems USA

A Veteran Owned Business

John E. Zuehlke jz@pcsusa.pro

1-800-757-8250 US: www.pcsmachines.com AU: www.profilecuttingsystems.com America’s largest manufacturer of Underwater Lift Bags available fromus 25at lbs.the to 50 tons and Water Load TestShow, Bags toDec 50 tons. Visit International WorkBoat 1-3 Large inventory available. IMCA compliant. ABS Approved.

BOATS 3,000 HP PUSHBOAT

$1.79 Million

Call: 850-255-5266 cgonsoul@gmail.com

www.mbbrokerage.net

TUGS/BARGES FOR RENT BARGES SIZED FROM 8’x18’ TO 45’x120’ ALSO “SHUGART” SECTIONAL BARGES “TRUCKABLE TUGS” HERE Smith Brothers I nc., G alesv ille, MD 20765 (410) 867-1818 w w w.smithbarge.com 158

WB16_Classifieds_December.indd 158

www.workboat.com • DECEMBER 2016 • WorkBoat

10/31/16 9:46 AM

To advertise pl ease c ontac t J ef f Powel l • 207-842-5573 • jpowel l@divc om.com MARINE G EAR

SERVIC ES

We Build the Ship First. Production Lofting Detail Design 3D Modeling St. John’s, NL | Vancouver, BC | New Orleans, LA 709.368.0669 | 504.287.4310 | www.genoadesign.com

Become a Certified and Accredited Marine Surveyor

Fishing Vessel Qualified. Complete course and examination for all vessel types and uses. 1-800-245-4425 or navsurvey.com

2021 Dauphine Street

(800) 823-1324

•

New Orleans, LA 70116

(504) 945-8917

USCG License Software Affordable–Merchant Marine Exam Training

http://hawsepipe.net Freelance Software, 39 Peckham Place, Bristol RI 02809

401-556-1955 sales@hawsepipe.net

From sunrise to sunset, SERVIC ES the news and information you need, when BAYFRONT MARINE, INC. you need VESSEL it. DELIVERY SERVICE WORLDWIDE EXPERIENCED PROFESSIONALS Licensed Masters, Engineers and Crews Call Mel or Dianeto Longo (904) 824-8970 24/7 access important www.bayfrontmarineinc.com

Coast Guard & State Pilotage License Insurance Available Coverages; Legal Defense for CG, NTSB and State Pilot Hearings; Federal and State Civil Actions Reimbursement for Loss of Wages Group Coverage Also Available R.J. Mellusi & Co., 29 Broadway, Suite 2311 New York, N.Y. 10006 Tel. 1(800)280-1590, Fax. 1(212)385-0920, rjmellusi@sealawyers.com www.marinelicenseinsurance.com

industry resources. Become a member today.

www.workboat.com • DECEMBER 2016 • WorkBoat

WB16_Classifieds_December.indd 159

159

10/31/16 9:46 AM

PortofCall

Your

Sour ce F or E mployment, E qui

pme

nt & S ervic es

SERVIC ES

WWW.HMSGMCONSULTING.COM MARITIME BUSINESS DEVELOPMENT HMSconsulting_Comp7_6.indd 1

A SAMS® Surveyor must:

206.466.5083

ê Conduct their business in a professional manner. ê Maintain independence, integrity, and objectivity.

10/19/16 11:14 AM

TRAINING

Maritime TOAR Assessments

ê Strive to enhance the profession of Marine Surveying. ê Maintain and enhance their professional knowledge and expertise.

TECHNICAL SERVICES

SAFETY & RISK MANAGEMENT

Providing Mariners with Solutions for USCG TOAR Requirements

www.maritimetoarassessments.com

ê Avoid prejudice and conflict of interest ê Abide by a strict code of ethics and rules of practice.

TRAINING

160

WB16_Classifieds_December.indd 160

www.workboat.com • DECEMBER 2016 • WorkBoat

10/31/16 9:46 AM

To advertise pl ease c ontac t J ef f Powel l • 207-842-5573 • jpowel l@divc om.com TRAINING

Mari2me Ins2tute of Technology

850-387-1829

925 Cherry Street

Panama City, FL 32401

www.mitnavschool.com

facebook.com/mitnavschool

USCG Approved Courses Basic First Aid, CPR & AED

Leadership & Managerial Skills

STCW (Basic Safety Training)

Radar Renewal

Able Seaman / Lifeboatman Limited

Exam Prep (500 / 1600 / 3rd Mate)

100 Ton Master (Upgrade)

T O A R (Towing Operator Assessment Record)

200 Ton Master (Upgrade)

Visual Communications (Flashing Lights)

Celestial Navigation

OUPV (Operator of Uninspected Passenger Vehicles)

Classified Advertising Contact:

Jeff P owell (207) 842-5573 jpowell@divcom.com

From sunrise to sunset, the news and information you need, when you need it. 24/7 access to important industry resources. Become a member today.

www.workboat.com • DECEMBER 2016 • WorkBoat

WB16_Classifieds_December.indd 161

161

10/31/16 9:47 AM

PortofCall

Your

Sour ce F or E mployment, E qui

pme

nt & S ervic es

TRAINING

162

WB16_Classifieds_December.indd 162

www.workboat.com • DECEMBER 2016 • WorkBoat

10/31/16 11:55 AM

To advertise pl ease c ontac t J ef f Powel l • 207-842-5573 • jpowel l@divc om.com ADVERTISERS INDEX Advertiser

Page

Advertiser

Page

Advertiser

Page

ABB Inc BU Turbocharger. . . . . . . . . . . . . . . . 76

Volcanic Heater. . . . . . . . . . . . . . . . . . . . . . . 109

Ocean Charting Services . . . . . . . . . . . . . . . . 72

ABS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Furuno USA . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Omnithruster Inc . . . . . . . . . . . . . . . . . . . . . . . 30

AER Supply Ltd . . . . . . . . . . . . . . . . . . . . . . . 18

Gibbs & Cox . . . . . . . . . . . . . . . . . . . . . . . . . . 98

On Site Alignment. . . . . . . . . . . . . . . . . . . . . 124

Ahead Sanitation Systems Inc . . . . . . . . . . . . 60

Gladding-Hearn Shipbuilding . . . . . . . . . . . . . 84

Panolin America Inc . . . . . . . . . . . . . . . . . . . . 90

All American Marine . . . . . . . . . . . . . . . . . . . . 40

GPLink, LLC . . . . . . . . . . . . . . . . . . . . . . . . . . 42

PEPCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

American VULKAN Corp . . . . . . . . . . . . . . . .101

Great American Insurance Group. . . . . . . . . . 64

Power Panels, LLC . . . . . . . . . . . . . . . . . . . . .117

Aurand Manufacturing & Equipment Co . . . . . 21

Gulf Coast Air & Hydraulics Inc. . . . . COVER TIP

Aventics Corporation . . . . . . . . . . . . . . . . . . . 28

Gulf Island Shipyards LLC . . . . . . . . . . . . . . . 111

Baier Universal Motion Components "UMC" . 52

Gunderson Marine LLC . . . . . . . . . . . . . . . . . 58

Berard Transportation Inc . . . . . . . . . . . . . . . 125

Haley Marine Gears Inc . . . . . . . . . . . . . . . . . 93

Bloom Incorporated . . . . . . . . . . . . . . . . . . . 106

Hamilton Marine Inc . . . . . . . . . . . . . . . . . . . . . 6

Blount Boats Inc . . . . . . . . . . . . . . . . . . . . . . . 84

Hammonds Fuel Additives Inc . . . . . . . . . . . . 94

Bostrom, H.O. Co Inc . . . . . . . . . . . . . . . . . . . 38

Harken Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Bouchard Transportation Co., Inc.. . . . . . . . . . .11

Harris Electric Inc . . . . . . . . . . . . . . . . . . . . . . 52

Breaux Bay Craft Inc. . . . . . . . . . . . . . . . . . . . 30

Honeywell Hermetic . . . . . . . . . . . . . . . . . . . . 88

Bristol Harbor Group Inc. . . . . . . . . . . . . . . . . 54

Horizon Shipbuilding Inc. . . . . . . . . . . . . . . . . 51

Brunswick Commercial & Gov't Products . . . . 29

IDC Technical Services. . . . . . . . . . . . . . . . . 104

Brunvoll AS . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Imtra Corp. . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Scania. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Burger Boat Company . . . . . . . . . . . . . . . . . . 48

Inland Marine Service, Inc.. . . . . . . . . . . . . . . 39

Schottel GmbH . . . . . . . . . . . . . . . . . . . . . . . . 15

Carboline Company . . . . . . . . . . . . . . . . . . . . 97

Intercon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Seakeeper . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

CENTA Corporation . . . . . . . . . . . . . . . . . . . . 24

International WorkBoat Show . . . . . . . . . . . . 155

Sea-Trac Offshore Services . . . . . . . . . . 60, 107

CLS America. . . . . . . . . . . . . . . . . . . . . . . . . . 10

Japan Radio Co., Ltd. . . . . . . . . . . . . . . . . . . . 71

Semarmex . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Coastal Electric Supply, LLC . . . . . . . . . . . . .115

Jensen Maritime Consultants Inc . . . . . . . 59, 27

Sherwin-Williams . . . . . . . . . . . . . . . . . . . . . . 61

Coastal Marine Equipment Inc . . . . . . . . . . . . . 8

JMS Naval Architects . . . . . . . . . . . . . . . . . . . 32

Siemens Industry Inc.. . . . . . . . . . . . . . . . . . .119

Coast Guard Foundation . . . . . . . . . . . . . . . 162

John Deere Power Systems . . . . . . . . . . . . . . 31

Simrad - Navico . . . . . . . . . . . . . . . . . . . . . . . 43

Colonna's Shipyard Inc . . . . . . . . . . . . . . . . . . 44

Karl Senner, LLC . . . . . . . . . . . . . . . . . . . . . CV4

Smith Berger Marine Inc. . . . . . . . . . . . . . . . .112

Commercial Marine Expo Inc.. . . . . . . . . . . . .110

Louisiana Cat . . . . . . . . . . . . . . . . . . . . . . . . CV2

STAR Center. . . . . . . . . . . . . . . . . . . . . . . . . . .74

Compass Courses Maritime Training . . . . . . 124

Maine Maritime Academy . . . . . . . . . . . . . . . 108

Steiner Construction . . . . . . . . . . . . . . . . . . . . 77

Cox Powertrain Limited. . . . . . . . . . . . . . . . . . 44

MAN Engines & Components Inc . . . . . . . . . . 81

Texas A&M Engineering Extension Service . . 82

CPV MANUFACTURING . . . . . . . . . . . . . . . . 49

Marine Jet Power, Inc. . . . . . . . . . . . . . . . . . . 17

Cummins Inc. . . . . . . . . . . . . . . . . . . . . . . . . . 65

Marine Machining & Mfg. . . . . . . . . . . . . . . . .112

David Clark Company Inc . . . . . . . . . . . . . . . . 57

Marine Travelift Inc . . . . . . . . . . . . . . . . . . . . . 95

Diesel America West. . . . . . . . . . . . . . . . . . . . . 8

Maritime Professional Training . . . . . . . . . . . 105

Dometic Marine . . . . . . . . . . . . . . . . . . . . . . . 87

Mast Products/E-LED Lighting Inc . . . . . . . . 106

Driveline Service of Portland Inc . . . . . . . . . . . 5

McDermott Light & Signal. . . . . . . . . . . . . . . . . 1

Duramax Marine LLC . . . . . . . . . . . . . . . . . . CV3

Metalcraft Marine Inc . . . . . . . . . . . . . . . . . . . 34

Eastern Shipbuilding Group . . . . . . . . . . . . . . 45

Metal Shark Aluminum Boats . . . . . . . . . . . . . 75

Elite Diesel Service. . . . . . . . . . . . . . . . . . . . 104

Metals USA - Plates & Shapes . . . . . . . . . . . . 96

Environmental Marine Inc. . . . . . . . . . . . . . . . 88

Mitsubishi Turbocharger and Engine America, inc.. . . 79

ExxonMobil Marine Fuels & Lubricants . . . . . . 7

Modutech Marine Inc . . . . . . . . . . . . . . . . . . 100

Fairbanks Morse Engine. . . . . . . . . . . . . . . . 102

Moose Boats. . . . . . . . . . . . . . . . . . . . . . . . . . 55

FCI Watermakers Inc . . . . . . . . . . . . . . . . . . . 50

Motor-Services Hugo Stamp Inc. . . . . . . . . . . 53

Wartsila Finland Oy Marine Solutions . . . . . . 85

Fincantieri Marine Group . . . . . . . . . . . . . . . . 91

MTU America Inc.. . . . . . . . . . . . . . . . . . . . . . . 2

Washburn & Doughty Associates Inc . . . . . . . 62

FLIR Systems . . . . . . . . . . . . . . . . . . . . . . . . . 83

Nabrico . . . . . . . . . . . . . . . . . . . . . . . . . . .34, 117

Washington Chain & Supply Inc . . . . . . . . . . 100

Force Control Industries Inc . . . . . . . . . . . . . . 58

Nautican . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Yank Marine Inc. . . . . . . . . . . . . . . . . . . . . . . . 92

Fraser Bronze Foundry Inc . . . . . . . . . . . . . . . 62

Norma Group . . . . . . . . . . . . . . . . . . . . . . . . . 46

Yanmar America . . . . . . . . . . . . . . . . . . . . . . . 66

Fremont Maritime Services. . . . . . . . . . . . . . . . 4

Northern Lights. . . . . . . . . . . . . . . . . . . . . . . . 67

ZF Marine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

www.workboat.com • DECEMBER 2016 • WorkBoat

WB16_Classifieds_December.indd 163

PYI Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Rapp Marine U.S. Inc . . . . . . . . . . . . . . . . . . . 21 Reliant Recycling . . . . . . . . . . . . . . . . . . . . . . 62 Research Products/Blankenship. . . . . . . . . . . 40 R M Young Company . . . . . . . . . . . . . . . . . . 102 Rolls-Royce Marine . . . . . . . . . . . . . . . . . . . . 99 Rozema Boat Works Inc . . . . . . . . . . . . . . . . . 80 R W Fernstrum & Company . . . . . . . . . . . . . . . 9 SAFE Boats International . . . . . . . . . . . . . . . . 70 Sapa Extrusion North America . . . . . . . . . . . .113

Thermal Structures. . . . . . . . . . . . . . . . . . . . .110 Thordon Bearings Inc . . . . . . . . . . . . . . . . . . . 47 Timberland Equipment . . . . . . . . . . . . . . . . . . 28 TMS - LevelCom. . . . . . . . . . . . . . . . . . . . . . . 96 Total / Lubmarine . . . . . . . . . . . . . . . . . . . . . 103 Travelers Insurance Inc. . . . . . . . . . . . . . . . . . 23 ValvTect Petroleum Products . . . . . . . . . . . . . 78 Vigor Industrial . . . . . . . . . . . . . . . . . . . . . . . . 33 Volvo Penta. . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Walker Engineering Enterprises . . . . . . . . . . . 13 Walther Electric . . . . . . . . . . . . . . . . . . . . . . . 10

163

10/31/16 1:41 PM

LOOKS BACK DECEMBER 1976

• In what is reportedly the nation’s deadliest ferry disaster, the 664' Norwegian tanker Frosta rammed and capsized a Mississippi River ferry on Oct. 20 killing 77 people, including all five crewmembers. Eighteen people survived. The accident occurred near Luling, La., about 25 miles upriver from New Orleans. The ferry George Prince was

loaded with commuters and cars. Witnesses said the tanker blew several warning signals to the 125' ferry but the pilot appeared not to notice or felt he could outrun the larger tanker. Witnesses also reported that moments before the collision, passengers on the ferry began waving and shouting to the tanker as if to make the vessel turn back. Those in cars started blowing their horns and turning DECEMBER 1986 on their

lights. The Times-Picayune reported that an autopsy on ferry pilot Egidio “Gene” Auletta showed that he had been drinking on the job. A Coast Guard investigation ruled that Auletta’s failure to avoid the collision was the primary cause of the disaster.

Bar Harbor, Maine. The original ma• On the cover is the Liberty, the second of two dedicated fireboats under chinery, pumps and electrical generators were retained, and a new alumiconstruction at Moss Point Marine, num superstructure was built for the Escatawpa, Miss., for the Port of Long Beach, Calif. Each boat can deliver hull. The vessel has bus seating on each 10,000-gpm of water or water/foam side going forward and bus seating on mixture. the top deck. • Gulf Craft Inc., Patterson, La., has converted a 110' crewboat into a 350-passenger whale watching vessel for Bar Harbor Whale DECEMBER 1996 Watch Co., • In late September, Congress passed the Coast Guard Authorization Act, which President Clinton is expected to sign. Some of key provisions would: limit the amount charged for USCG inspection fees for passenger vessels under 65' to $300, and $600 for vessels 65' and longer; extend the validity of Coast Guard inspections from two to five years; promote international 164

WB_LooksBack_LINO.indd 164

financing of U.S.-flag-vessels by allowing U.S. boat owners to shop on the world market for the cheapest financing without having to get prior approval from the Department of Transportation; allow foreign-owned leasing companies to own U.S.-flag vessels operating in Jones Act service; and prohibit the USCG from repairing its vessels in foreign shipyards. www.workboat.com • DECEMBER 2016 • WorkBoat

11/4/16 8:28 AM

DURAMAX®

SHAFT SEAL SYSTEMS

Engineered for Optimum Sealing Performance.

The DryMax™ seal is a robust, environmentally friendly, water-lubricated stern tube seal system. Engineered to accommodate the most axial and radial shaft movement of any seal design while eliminating wear on the shaft.

Reversible DuraChrome™ mating ring gives 2X the life extending drydock intervals

Keeps seawater out of your vessel and your bilge dry. The DryMax™ engineered nitrile rubber ring rotates with the shaft and creates a hydrodynamic seal with the DuraChrome™ mating ring.

Superior sealing and wear life. The proprietary rubber polymer seal ring and the DuraChrome™ alloy mating ring have been engineered to provide optimal sealing and long wear life.

Virtually maintenance free. An inflatable seal is built into the housing allowing seal inspection and primary sealing ring replacement at sea without dry docking.

MADE IN U.S.A.

DryMax™ is ideal for vessels operating in both brown and blue water. It accommodates shaft sizes and stern tubes up to 36".

MADE IN U.S.A.

The DryMax™ seal is also available as a rudder stock seal.

For more information on DryMax™ Shaft Seal or to purchase contact: Duramax Marine at 440-834-5400 or go to DuramaxMarine.com

Booth 1901

Duramax Marine® is an ISO 9001:2008 Certified Company

Products And Knowledge You Trust WB_CVRS.indd 3 2016WORKBOATAd_8.125x10.875.indd 1

p: 440.834.5400 f: 800.497.9283 11/7/16 11/4/16 3:25 9:33 PM AM

Booth 2817

PROPELLING

WB_CVRS.indd 4

EXCELLENCE

10/25/16 3:09 PM