SCRAMBLER V1: Carving and freestyle hydrofoil board UK

SC RAMBLER V1

4’3 x 18 1/2 x 2 3/16 21liters

SC RAMBLER V1: Carving and freestyle hydrofoil board The Scrambler 4’3 V1 is the latest generation of foil board.

After months of intensive testing, the Scrambler will delight the demanding riders, a board without compromises, developed for an optimum practice of kitefoil.

FEATURES - 4‘3 x 18 1/2 x 2 3/16 or 130 cm x 47 cm x 5.5 cm - 21 liters - Ultra compact, high performance Kitefoil board - Track system for the foil connection - Strapless, one, two or three straps setting - 3Kg weight (+/-10%) - Full Vacuum PVC Sandwich Construction

PERFORMANCE: The 4’3 Scrambler is a board shaped and constructed specifically for the practice of kitefoil.

The board is designed with a very compact outline, a wide nose for easy jump landing which optimizes control when the rails hit the water.

The tail of the board has been refined for an optimized upwind ability with the smooth ride through chops. The large pad provides a very enjoyable ride and matte finish is ideal for grabs and other no-foot tricks.

The Scrambler is the ideal board for those looking for maximum performance and comfort in all conditions.

ACCESSIBILITY & FREERIDE / ideal for learning and evolving The reduced length of the board makes it very responsive and provides increased control.

During jumps, the wind surface of the Scrambler is minimal allowing innovative tricks.

SCRAMBLER 4’3: The ultimate and versatile board for the kitefoil Bottom

Double concave front keel and flat deck: Maximum control

The board was designed for early planning and optimal control when the rail hits the water.

A specific work was carried out under the bottom of the board: - a deep double concave on the front of the board gives maximum control - the bottom becomes flat on the tail (the back of the board) to improve the low end.

Scoop/rocker The scoop of the board has two sections: -The back section is very tight to allow a early take-off.

-The front section has a pronounced spatula for smoother touch-downs.

Deck The deck of the Scrambler is flat giving more confort and control.

Bevels and maximum width forward

Maximum width forward and increased scoop: More control in chops

Once you have passed the stage of learning, you will then taste the joys of riding full powered, the Scrambler will fulfill your desires.

The Bevel rails allows for better control as well as a better upwind ability.

However, in choppy conditions, a classic rail will stick the board to the water making the board lose its speed.

With a rail of type bevel, inverted, ideally designed and a maximum width of the board very forward, the Scrambler 4’3 bounces on the water and therefore does not lose any speed.

Track system for the foil connection

Adjustable foil plate location: - Plate forward: more front foot pressre (sketch on the middle, perfect for improving your airjibes skills - Plate backward: more back foot pressure (more control at high speeds, right sketch)

The foil connection has been designed for maximum stiffness and durability.

The use of two US rails (90mm apart) allows for an adjustable setting of the foil position.

Measurements are present under the board to always attach the foil to the desired location.

The foil Attachment pack (M6x35mm screws + plastic washers + stainless steel washers + nuts x 4) is included with the board.

Straps/Pads The board can be ridden strapless, with one, two or three straps.

The Scrambler is equipped with 5 positions for straps, combined with US rails to screw the foil under the board, which will also please owners of foils other than ZEEKO. Thanks to large pads, Scrambler provides a very comfortable ride, even strapless.

Sandwich construction

Multi Modal strap setting: Strapless / 1 Strap / 2 Straps / 3 Straps

For a better weight/performance ratio, the board is made of PVC/fiberglass sandwich. The high density core makes it very resistant to wedging. Shaper- type vacuum manufacturing makes it possible to have an incredible weight/resistance ratio.

The US boxes are reinforced for kitefoil use without compromise.

All the boxes (US rails, straps inserts, plugs) are reinforced with high density foam PVC and fiberglass.

The board is reinforced at critical locations (rails, feet).

Epoxy finish and mat paint E-Glass reinforced rails Multi layers Fiberglass High density PVC sandwich Biaxis Fiberglass High density EPS core High density PVC Stringers E-Glass reinforcements Multi layers Fiberglass