COVER STORY
SANGAMO PLUS — HEATING AND TIMER CONTROLS FOR ALL APPLICATIONS The Sangamo Choice Plus collections offer a wide range of heating and timer controls for domestic, commercial, and industrial use. The brand’s reputation for quality and reliability is unrivalled and ESP believes this new comprehensive offer will make it easier for contractors to select the right solutions for the project in hand and will provide wholesalers with a greater choice of products that will encourage upselling.
W
ith energy efficiency top of the agenda for the economy, businesses and householders, a key aim of the revamp is to introduce features that will assist with efficiency and performance and that will ultimately drive down energy usage and costs. The new-look Sangamo offer can be broken down into three main product categories, with a total of 15 products making up the comprehensive range: • Choice+ Thermostats • Choice+ Programmers • Powersaver+ Controllers
Choice+ Thermostats
A total of 15 products make up the comprehensive range
The Choice+ Thermostats range of products – designed for controlling heating systems via an electronic sensor – now totals seven products. The Choice+ room thermostat regulates and maintains a desirable temperature through the home by calling for heat as the temperature varies through the day. For example, if the temperature drops below the set temperature the thermostat calls for heat from the boiler, heating the radiators until the set point is reached. Choice+ thermostats include a TPI (Time Proportional and Integral) control feature to ensure a maintained temperature by analysis of the heating and cooling periods. In addition, Choice+ programmable thermostats include Optimum Start and Delayed Stop for additional efficiency, heating and cooling for the time programmed. These features combine to offer the best in heating comfort and energy efficiency when compared to traditional on/off thermostats.
Powersaver+ Controllers
For installer convenience, Choice+ wireless thermostats are an option if a hardwired connection is not available in the intended location. The Choice+ Thermostats range comprises: • Electronic room thermostat • Tamper proof electronic room thermostat • Electronic frost thermostat • Electronic room thermostat with digital display • Wireless electronic room thermostat with digital display • Seven-day programmable room thermostat • Wireless programmable thermostat with digital display
Choice+ Programmers
The whole range has been redesigned to create a sleek appearance
The Choice+ Programmers are designed for heating and hot water controlled independently across separate channels via a programmed schedule. For certain properties, thermostats are not required and a simple programmer to activate the heating or hot water is all that is needed. A Choice+ Programmer allows the occupant to specify when a call for heat is made in order to match their lifestyle requirements and ensuring energy efficiency. There is a choice of one to three channel programmers in order to suit the system application, from single channel control suitable for combi boilers, to double control for independent heating and hot water and, finally, a three channel option for when two heating zones are required. In addition, each Choice+ Programmer has a selectable Service Interval function, which assists with compliance to the Gas Safety Regulations requiring landlords to carry out annual gas safety checks on appliances in rental properties. To ensure a user and installer friendly experience, the Choice+ Programmers incorporate a large display screen with clear graphics and pre-set schedule for convenience. The Choice+ Programmers range comprises: • One channel programmer with digital display and service interval function • Two channel programmer with digital display and service interval function • Three channel programmer with digital display and service interval function
10 | April 2021
FCP – ESP.indd 10
electricalcontractingnews.com
The Powersaver+ Controllers are primarily used to control immersion heaters. In a typical UK household, nearly 20% of a home’s energy cost is spent on heating hot water. Leaving an immersion heater on all the time can be a significant waste of energy that can drive this figure up to 25%, or even higher. The automatic control of a Powersaver+ Controller can save on fuel expenditure and energy wastage. Amongst a wide range of applications, the Powersaver+ Controller models are also suitable for combi boilers, panel heaters, lighting – including LEDs – and towel rails. The range includes a double pole switched fused option to incorporate an extra isolation feature which separates the live and neutral wires, adding additional safety for high loads. The Powersaver+ Controllers range comprises: • Two-hour electronic boost timer • Two-hour electronic boost timer and fused spur • Seven-day time switch with boost • 24-hour fused spur time switch with boost • Seven-day fused spur time switch with boost
Housing and packaging As part of the relaunch, the entire collection of products has undergone a complete housing redesign to produce a range that is consistent in look and features a bold, contemporary appearance to appeal to the end user. Brand new packaging has also been designed to create a uniform look with striking blue and white colours that will stand out on the wholesaler’s shelves and will make it easy to identify products with the range.
Brochure and video A dedicated brochure has been produced to provide full details of the entire range and will act as a valuable resource for wholesalers and installers alike. This can be downloaded from the ESP website and is also available on the Scolmore Group App within the catalogues section. The video can be watched using the link here – https://youtu.be/A3CAIcpbyjo. ESP, espuk.com
@ElecConNews
/electricalcontractingnews
23/03/2021 12:24
