Heavy Equipment Guide April 2019, Volume 34, Number 4

HEAV Y EQUIPMENT GUIDE APRIL 2019

VERSATILITY AND MOBILITY PUBLICATIONS MAIL AGREEMENT NO. 40069270

AN IN-DEPTH LOOK AT IMPACT CRUSHERS 12

www.heavyequipmentguide.ca

ANNUAL ATTACHMENTS GUIDE 42

TODAY’S TECHNOLOGY BOOSTS COLD MILLING PRODUCTIVITY 18 7 STEPS TO EFFECTIVE WHEEL LOADER MAINTENANCE 36

EVO

From chaos to control.

Say goodbye to paper, spreadsheets, and juggling solutions.

Procore Project Management is an all-in-one construction platform that allows everyone on your project to collaborate in a single, standardized system with access to real-time drawings and documents.

Connect field and office teams, prevent the risk of losing data to manual entry, and make getting the job done easier.

procore.com

866 477 6267

• EXCLUSIVE INDEPENDENT TRAVEL • ADVANCED HYDRAULIC CIRCUITRY • SET ATTACHMENT FLOW FROM CAB

DO MORE WITH A SINGLE MACHINE Most excavators can only do one thing at a time – travel, lift or swing. With our exclusive independent travel feature, KOBELCO excavators can do all three. Advanced hydraulic circuitry keeps the right amount of power going to the right places, so you can tackle even the most complicated tasks more efficiently and safely than ever before. Plus, hydraulic flow settings for up to 18 different attachments can be adjusted right from the cab, so switching between tasks takes only minutes.

The next time you’re about to transport multiple machines to the jobsite, consider sending just one KOBELCO to take care of business.

MINI

SHORT RADIUS

CONVENTIONAL

KOBELCO-USA.COM/EXCAVATORS

All-new interior drivers love.

Designed by drivers for drivers, the all-new Mack® Granite® interior improves productivity and profitability. With all key controls at arm’s length and a seat that keeps them comfortable all day long, your current drivers—and new ones you’ll attract—will finish the job as strong as they started. See how Mack is right for your bottom line at MackTrucks.com/NoPain

Contents

HEAVY EQUIPMENT GUIDE

12

APRIL 2019 | VOLUME 34, NUMBER 4

32

COVER FEATURE

18

42

FEATURES 12 Versatility and mobility

Impact crushers have broad appeal across various sectors, and for good reason.

18 Today’s technology boosts cold milling productivity 20 Efficiency and quality mark BOMAG’s return to commercial paving 24 New controls and operator features for Komatsu motor grader

28 Know what utility products can do for you

36 7 steps to effective wheel loader maintenance

30 Kubota’s lightest and most maneuverable compact track loader ever

40 Changing safety culture

32 Genie adds two more XC models to lineup

42 Annual Attachments Guide

In addition to utility vehicles, there’s also a utility work machine option for contractors.

Designed to work in more applications that require higher capacities.

Breaking through the paper jam that can cut down on safety plan buy-in.

Cover photo: Keestrack R5 impact crusher.

DEPARTMENTS

SECTIONS 10 Spotlight 12 In-Depth Report 18 Roadbuilding & Rehabilitation

Performing routine maintenance is critical to safeguard productivity.

24 Earthmoving & Excavation 28 Compact Equipment 34 Rental Spotlight

36 Equipment Maintenance & Management 40 Construction Business Management 42 Annual Attachments Guide

8 Editor’s Letter 54 Industry News 54 Advertiser Index

APRIL 2019

>> www.heavyequipmentguide.ca 7

VIEWPOINT Breaking the infrastructure logjam

I

t seems like a yearly occurrence – the federal budget comes out, and there’s a promise from Ottawa that this year, for real, there will be more money for infrastructure doled out to provinces and municipalities.

The Liberals’ 2019 effort was no different when delivered in March; once again, infrastructure was a top priority, and once again it remains to be seen how much of that funding will actually end up with shovels in the ground.

Canada has a massive infrastructure deficit as older roads, bridges, water and sewer systems, and other services vital to the operation of our communities and economy near the end of their viable life. A 2016 estimate of Canadian infrastructure suggests that the total value of core municipal infrastructure assets is around $1.1 trillion – and that about onethird of that is in a condition that could be considered fair, poor or very poor.

So how much money do we need to put into infrastructure if we’re to slow down that deterioration and ensure our communities keep functioning safely and cleanly? The Federation of Canadian Municipalities estimates that the country has fallen behind by some $123 billion since the 1950s, according to a 2018 CBC report. That’s a lot of crumbling sewer lines and bridges, and while nowhere near the level of our associates south of the border (according to the American Society of Civil Engineers, the U.S. has an infrastructure gap of about $1.5 trillion – yes, trillion), it has the same effect: bad infrastructure means a loss to the economy as a whole.

The federal government has begun to attack the problem; its Investing in Canada Plan is starting to gain momentum, though the nearly $100 billion increase in infrastructure spending over several years has proven very slow to get boots on the ground in many areas. “The pace of spending under the Investing in Canada Plan has been slower than originally anticipated,” according to the document. Reasons given suggest delays between construction activity and government receiving claims for payment, or slower prioritization of projects in some jurisdictions.

This year’s budget includes a doubling of yearly gas tax funding, adding $2.2 billion to the bottom line for municipalities. The idea is for that money to be put to work quickly – unlike the nearly $20 billion that has been approved for federal financing but that has been stalled to some extent. Municipalities are able to access and spend gas tax funds far quicker than federally-funded projects can get underway.

The current Liberal plan would see nearly $190 billion spent on infrastructure improvements over the next ten years. Hopefully, with some fast-tracked funds this year, Canada’s construction industry will be called on to help fill the gaps in our infrastructure sooner than later.

Lee Toop Associate Editor A note: Editorial Director Lawrence Buser is enjoying some well-deserved time off, so Managing Editor Kaitlyn Till and myself will be handling the next few issues of Heavy Equipment Guide. We are always happy to hear from our friends in the industry about any stories that might be of interest, so please feel free to contact either of us with story suggestions or thoughts about the magazine. We look forward to hearing from you.

FOLLOW US ON

VISIT US ONLINE www.heavyequipmentguide.ca 8

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

HEAVY EQUIPMENT GUIDE APRIL 2019 VOLUME 34 • NUMBER 4 EDITORIAL DIRECTOR Lawrence Buser lbuser@baumpub.com; 604-291-9900 ext. 310 ASSOCIATE EDITOR Lee Toop ltoop@baumpub.com; 604-291-9900 ext. 315 MANAGING EDITOR & DIGITAL CONTENT MANAGER Kaitlyn Till ktill@baumpub.com; 604-291-9900 ext. 330 ASSOCIATE PUBLISHER Sam Esmaili sam@baumpub.com; 604-291-9900 ext. 110 ASSOCIATE PUBLISHER David Gilmour dgilmour@baumpub.com; 604-291-9900 ext. 105 ADVERTISING PRODUCTION MANAGER Tina Anderson production@baumpub.com; 604-291-9900 ext. 222 DESIGN & PRODUCTION Morena Zanotto morena@baumpub.com; 604-291-9900 ext. 325 PRESIDENT/PUBLISHER Ken Singer ksinger@baumpub.com; 604-291-9900 ext. 226 VICE PRESIDENT/CONTROLLER Melvin Date Chong mdatechong@baumpub.com FOUNDER Engelbert J. Baum Published by: Baum Publications Ltd. 124 - 2323 Boundary Road Vancouver, BC, Canada V5M 4V8 Tel: 604-291-9900 Toll Free: 1-888-286-3630 Fax: 604-291-1906 www.baumpub.com www.heavyequipmentguide.ca @HeavyEquipGuide FOR ALL CIRCULATION INQUIRES Phone: 1-855-329-1909 • Fax: 1-855-272-0972 e-mail: baumpublications@circlink.ca Subscription: To subscribe, renew your subscription, or change your address or other information, go to: http://mysubscription.ca/heg/ Heavy Equipment Guide serves the Canadian engineered construction industry including: road building and maintenance; highways, bridges, tunnels; grading and excavating; earthmoving; crushing; trucking and hauling; underground utilities; trenching; concrete paving; asphalt paving; demolition; aggregates production; fleet maintenance; and asset security and management. The magazine is distributed to key industry personnel involved in these sectors.

Subscription Price: In Canada, CDN $91.00; Outside Canada, US$149.

Heavy Equipment Guide is published ten times a year in January, February, March, April, May, June, July/August, September, October and November/December.

Heavy Equipment Guide accepts no responsibility or liability for reported claims made by manufacturers and/or distributors for products or services; the views and opinions ­expressed are those of the authors and not necessarily those of Baum Publications Ltd. Copyright 2019, Baum Publications Ltd. No portion of this publication may be reproduced without permission of the publishers.

We acknowledge the financial support of the Government of Canada.

Printed in Canada, on recycled paper by Mitchell Press Ltd. ISSN 1485-6085 PUBLICATIONS MAIL AGREEMENT NO. 40069270 Return undeliverable Canadian addresses to: Circulation Dept., 124-2323 Boundary Road, Vancouver, BC V5M 4V8 Email: baumpublications@circlink.ca Fax: 1-855-272-0972

Experience the progress.

Visit us at:

Munich, April 8th –14th Find out more at www.liebherr-bauma.com

The Liebherr crawler excavator New powerful Tier 4 Final engine of 129 kW (+ 8% in comparison with the last generation) Particularly short rear swing radius of 1.70 m for increased safety and flexibility on sites Uppercarriage swing torque strongly increased to 84 kNm (+ 18%) for higher productivity, especially when working on slopes Innovative maintenance concept for easy, fast and safe servicing Liebherr-Canada Ltd. 1015 Sutton Drive, Burlington, Ontario L7L 5Z8 Phone: +1 905 319 9222 E-mail: info.lca@liebherr.com www.facebook.com/LiebherrConstruction instagram@liebherrcanadaltd www.liebherr.ca

SPOTLIGHT //

INTRODUCTIONS & UPDATES

Keep up to date on the latest equipment and product introductions. Visit HeavyEquipmentGuide.ca or subscribe to our weekly eNewsletter at HeavyEquipmentGuide.ca/newsletter-info TAKEUCHI

COMPACT HYDRAULIC EXCAVATOR Weighing 10,957 pounds (canopy), the TB250-2 provides Takeuchi with a true 5-ton excavator offering that is well suited for a wide range of applications. Features on the excavator include a long arm with integrated thumb mount and a max dig depth of 12 feet 4.8 inches. Takeuchi Fleet Management telematics system or TFM comes standard on the unit. This system allows the owner to view machine vitals, location, utilization, performance and maintenance data remotely and can be instrumental in ensuring machine uptime and availability.

A four pump hydraulic system provides exceptional multi-function capability and precision pilot joysticks deliver smooth, metered control. The TB250-2 is also an excellent attachment platform. The primary auxiliary circuit delivers 24.2 gpm and is controlled using a proportional slide switch located on the left hand joystick.

The multi-function monitor makes it possible to adjust hydraulic flow rates from the cabin, and multiple presets allow attachments to be exchanged quickly and easily. Additionally, detent mode provides continuous oil flow for various types of hydraulically driven attachments helping to improve efficiency and reduce fatigue.

TELSMITH

LOAD KING

PORTABLE CRUSHER DELIVERS A MOBILE CRUSHING ADVANTAGE

NEW MECHANICS BODY, PROPANE SERVICE BODY SERIES

The Telsmith 3244 Portable Plant provides consistent, reliable production, low mobilization costs, and flexibility in a number of processing applications such as producing quarried stone, sand and gravel, and recycling. The 3244 primary jaw plant can be used alone or configured with other mobile plants.

The 3244 begins with a 48-inch by 20-foot vibrating grizzly feeder constructed with mild steel pan, 1/2-inch thick AR steel pan liners, 1/4-inch AR side liners, 6-foot straight deck AR steel grizzly bar sections, and heavy-duty coil support springs with pads to support standard duty loader feeds. The vibrating grizzly feeder is powered by a premium electric motor that boasts an efficient 40 horsepower.

In addition, the dual-shaft gear-driven vibrating unit offers adjustable counterweights, 140 mm flow through oil lubricated bearings, and grooved drive sheave to achieve maximum performance with minimal downtime. The 3244 offers throughput capacities from 175–265 stph through 325–530 stph.

ASV

RT-65 CTL WITH PREMIUM RELIABILITY AND SERVICEABILITY

The new radial-lift RT-65 Posi-Track compact track loader offers maximum serviceability, reliability, productivity and ASV’s patented Posi-Track undercarriage for superior performance. The RT-65 boasts easy serviceability so operators can spend less time maintaining the machine and more time on the job. Its turbocharged 67-horsepower Deutz 2.2-litre diesel engine produces 184 foot-pounds of torque that the drive motors transfer to ASV’s internal-drive sprockets. Internal rollers reduce friction loss in the undercarriage.

ASV built the RT-65’s auxiliary hydraulic system to be robust, with 3,300 psi of auxiliary pressure and 22.2-gpm standard flow. The company also offers an optional 27.4-gpm high-flow system.

The CTL features a rated operating capacity of 1,925 pounds and a tipping load of 5,500 pounds. It is 66 inches wide and has a 116.5-inch lift height. Standard joystick controls make operation easy and intuitive.

Load King has launched its new Voyager Series, a vocational collection of high-performance mechanics bodies. The series includes three primary models: The Voyager I mechanics body, an Under-CDL model, the Voyager II mechanics body, and the Voyager P propane service body.

The Voyager I and Voyager II mechanics bodies both feature a stateof-the-art modular control system with pushbutton control panel and an LCD diagnostic monitor, CTECH drawer sets, a custom-designed cab guard, compartment and bed storage, supreme corrosion protection through Load King’s full lining coverage and chrome-plated handles, and unmatched visibility and lighting.

XTREME MANUFACTURING

COMPACT TELEHANDLER The XR619 replaces the Xtreme XR5919 compact telehandler, and becomes the smallest model in the Xtreme telehandler family. Delivering a capacity upgrade over the XR5919, this compact A-Class telehandler has a lift capacity of 6,000 pounds (2,721 kg), a maximum lift height of 19 feet (5.79 m) and a forward reach of 11 feet (3.35 m).

It comes equipped as standard with long-life boom rollers, for smooth, chatter-free operation and minimal maintenance, as well as 360-degree visibility from the cab, intuitive operator controls and a boom lift point. Offered with a choice of three cab configurations – open; enclosed; or enclosed with heat and air conditioning – the XR619 can be ordered with either a fixed or a fork positioning carriage, and can be further customized 10

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

with individual options including LED work lights, a backup camera, and synthetic oil for cold environments. Designed to handle rough terrain, the XR619 is powered by a Deutz 2.9L 74 horsepower Tier 4 Final engine. High grip pneumatic 12.00 by 16.5 tires and a ground clearance of 10.8 inches (274 mm) make easy work of travelling around an uneven jobsite.

Weighing just 10,300 pounds (4,672 kg), the Xtreme XR619 delivers a long working life and low total ownership costs thanks to an all steel construction. New fibreglass engine covers provide improved fit and finish and better accessibility for servicing. The XR619 shares the same control system as its fellow Xtreme models, the XR742, XR944, XR1055 and XR1147.

SKYJACK

LARGE ROUGH-TERRAIN SCISSOR LIFT

THUNDER CREEK

MULTI-TANK UPFIT FOR MEDIUM-DUTY TRUCK BODIES Thunder Creek Equipment has expanded its multi-tank platform of diesel fuel hauling solutions to include a new medium-duty truck body – the Multi-Tank Upfit – that can haul bulk diesel on the road without requiring a CDL or HAZMAT endorsement (depending on local regulations). Each truck is outfitted with eight independent 115-gallon tanks (920-gallon total capacity) that are only connected when a common manifold is opened at the pumping station.

“This is the natural evolution of the multi-tank concept, allowing contractors, heavy equipment owners and fuelling services to haul diesel in the platform that makes sense,” said Luke Van Wyk, vice president of sales, Thunder Creek Equipment.

The new Multi-Tank Upfit is currently compatible with the Ford F550 chassis (Class 5 – either with or without PTO). Thunder Creek plans on engineering the body for additional Class 5 and Class 6 trucks. The rear utility box of the new design contains the diesel pump and the manifold system. Options include a variety of meters numerous reel options and lengths, a powerful 4-micron filter to ensure greater fuel quality, and colour schemes that match the Thunder Creek line of fuel and service trailers.

The SJ9253 RT is Skyjack’s largest scissor lift to date with a working height of 59 feet (17.98 m) and is the first model in the new full-size rough-terrain range. Skyjack also has plans for an even larger rough terrain scissor lift that would make work at six stories possible, increasing the number of applications these machines could be used for.

The SJ9263 RT with a working height of 69 feet (21.03 m) is in its final design phase and is targeted for launch in Q4 2019.

These models boast increased working heights, increased capacities, faster function speeds, all along with market’s largest work platform across the range. The new models also feature an enhanced control system maintaining Skyjack’s proven colour-coded and numbered wiring system, while further improving the ease of troubleshooting and integration with the company’s ELEVATE telematics solution.

ALLMAND

MOBILE GENERATOR The new Maxi-Power 65 and 150 mobile generators are built with a durable, oversized alternator for easy motor starting. Delivering 65 and 150 kVA prime power, the units are equipped with a Tier 4 Final engines, and have a deep-sea controller for easier diagnostic readings. These generators have a frequency switch for flexibility of jobsite power needs and 15-inch tires for longer wear and greater towing capabilities.

Defining Tire Management Kal Tire’s Mining Tire Group specializes in a complete range of tire management services in over 20 countries. Our skilled workforce performs according to our global safety and operating standards, and focuses on extracting the maximum value from tires and related assets for mining customers.

As an independent tire dealer with 45 years’ experience, we ensure customers get the right product for the right application. Through continuous innovation, we are able to meet the evolving needs of mining customers and help them make the most of their tire investments.

APRIL 2019

KalTireMining.com

>> www.heavyequipmentguide.ca 11

IN-DEPTH REPORT: IMPACT CRUSHERS

VERSATILITY AND

Impact crushers have broad appeal across various sectors and for good reasons. Our panel of experts provide insights as to why this is, plus information on the dynamic market for impact crushers in Canada, their applications and advantages, customization and options, as well as what to consider when buying an impact crusher.

12

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

By Lawrence Buser, Editorial Director

T

he impact crusher market in Canada has become stronger as a broader range of applications and product choices generate higher demand across all regions, explained Julie Andras, global marketing & communications, McCloskey International. “This popularity has grown its roots for a number of reasons,” she said. “The mobility and versatility of a tracked HSI (horizontal shaft impactor) have been a large factor, making them very portable with respect to setup and repositioning. Compared to wheeled units, the new breed of track mobile impactors is compact and can fit many configurations when in circuit with other machines. These machines provide high production and can be taken to a site for a few days, weeks, months, or years depending on the need.”

Craig Rutherford, technical sales manager, Wirtgen America, commented: “Statistically speaking, the track-mounted machines account for approximately 60 percent of the Canadian impactor market as a whole, and growing. In recent years, we have seen an increase in demand for track mobility in order to lower the costs associated with plant mobilization, to lessen the amount of set up time required to start manufacturing product, and to increase productivity.”

Norbert Dieplinger, international business development manager, SBM Mineral Processing GmbH, pointed out that the regional differences in machine type are usually due to the different natural rock/stone deposits, but it’s not just the feed material which drives preference; final products, regulations and requests have to be considered.

ND MOBILITY

Their yearly production of tracked crushers reflects market demand. “We manufacture 80 percent impact, 15 percent jaw crushers and other types, but less than 1 percent are cone crushers. Looking at tracked vs. wheeled, the ratio is 99 percent to 1 percent. In the past couple of years, the trend is clearly towards tracked units and the reasons are manifold, like easier financing, highest utilization, easy transport [and] fast set up at low cost,” Dieplinger said.

Applications and advantages

Daryl Todd, president of Frontline Machinery, a Keestrack dealer in Chilliwack, B.C., explained that impact crushers are used by demolition contractors, civil construction, road builders and aggregate producers.

“Impact crushers work particularly well in concrete and asphalt recycling, and are also very effective in a quarry for aggregate,” added Paul King, Ontario sales manager for McCloskey International. “The crusher suits the applications as it does not squeeze material to break it, but rather hits it hard as it enters the chamber and throws it against a wall to assist in fracturing it.”

King noted that impact crushers are increasingly used for asphalt recycling which is on the rise across the country as government specifications begin to turn to more sustainable methods of maintaining their infrastructure. “Site work was traditionally dotted with jaw crushers and cones, in primary, secondary and even tertiary crushing combinations. Delivering a 3-inch minus end product with little or no reduction ratio was the standard for asphalt recycling.

Once impact crushers appeared on the rip rap scene, reduction dropped to 1

inch and more options for end recycled product became available.”

“Horizontal Impactors are the most versatile crushing machines as they handle larger reduction ratios than other types of crushers and can handle some smaller uncrushables, such as rebar, reasonably well. They can work as a primary crusher depending on the feed material size or be put in after a jaw or in a circuit with a screener to crush the oversize,” Andras added.

The advantages of an impact crusher are better product in terms of shape and gradation curve, and lower TCO (Total Cost of Ownership), which includes purchase price, service and maintenance cost, operating cost, higher utilization and a higher price for the final products, Dieplinger said. “If the calculation is done correctly, there is seldom a way to beat an impact crusher.”

He added: “Tracked impactors are used as primary or secondary crushers and portable skid-mounted impactors are usually used in secondary and tertiary crushing applications.”

According to McCloskey dealer Craig Kergen of Tyalta Industries Inc., the applications have shifted considerably in Western Canada, particularly over the past five years. “Municipalities and government are taking a new view on the tipping of material into their waste management and recycling facilities. Clean recycled concrete is enjoying lower or waived fees, and new programs are being engaged to educate people on how to avoid contamination prior to dropping off product.” The resulting material is now considered of such high quality that engineering specs for gravel used in roadbuilding are changing across jobsites.

Recycled material, for example 3-inch minus for road spec, is now on the rise

KLEEMANN MOBIREX MR 130 Z EVO2

IN-DEPTH REPORT: IMPACT CRUSHERS

SBM REMAX 500 as it allows more flexibility and offers an alternative where prices are rising for aggregate. Looking forward, Kergen believes that rather than the crushing company paying a fee to drop material, the tables will turn and the same companies will be paid for good quality, clean recycled concrete, and a cost will turn to a profit opportunity.

Currently, SBM mobile impact crushers are used in B.C. to crush blasted granite and dolomite; in Alberta and Saskatchewan to crush river gravel, reinforced concrete and asphalt; and in Ontario for recycling applications, among others, Dieplinger said.

King noted that impactors are becoming an integral part of roadbuilding in Ontario, both for infrastructure projects like the Highway 407 construction project, and rehabilitation of roads around the province to remedy them after a particularly heavy frost and use of salt over the past winter.

Advances in design

Advancements are continuously being made in this industry to increase plant efficiency, lower operational costs and lessen maintenance and downtime, noted Rutherford. An example he gave is diesel direct electric-drive, which provides excellent fuel economy in order to lower the cost per ton of product while providing ample power to each plant component.

“The diesel engine drives the electrical generator and the crusher directly from a fluid coupler,” explained Rutherford. “These electric drives within the plant require less maintenance and can provide better control and protection when compared to hydraulic drive systems. For example, should a conveyor belt become misaligned, the conveyor drive will sense excess power draw; it will then send a fault [signal to] notify the operator before excessive damage occurs to the belt.”

All tracked SBM crushers are diesel over electric

or 100 percent electric drive, which provides the cheapest and most flexible way to run a mobile plant compared to any other drive system, Dieplinger said.

“If our mobile plant is used in a quarry and they have main power there it can be operated 100 percent electric without running the diesel gen set on the plant.”

Todd outlined a number of benefits of hybrid power. These include the ability to power and run multiple machines from a single genset, and when running from the grid there is little maintenance required, which is important as approximately 30 percent of downtime and service costs are associated with engine related issues. In the event of a catastrophic engine failure, a replacement genset can be rented, mitigating additional downtime. Furthermore, electric power can give up to 10 percent higher production in some applications. Zero emission levels can be achieved when running on main electrical grid power. Both crusher and the anti-dust suppression system run while the diesel engine is switched off.

When it comes specifically to hybrid tracked equipment, there is the advantage of being truly mobile and yet still be able to take advantage of the benefits of electrical efficiency and reliability, Todd said. The units also offer a smaller footprint, handy for compact sites.

Noise is another area where improvements have been made. Noise levels of the Keestrack R3e have been reduced by over 30 percent compared to a standard unit by use of what Todd said is a unique electrical hybrid system. “The diesel engine of the R3e can be switched off and the unit can be run with a noise-suppressed generator set or the main electrical grid. The R3e can also be fitted with a noise reduction rubber lining in the loading area of the hopper, so the noise is suppressed when loading the crusher with an excavator or wheel loader. In addition, the extra-large fan for cooling the engine is running at only

“THE CONTINUED GROWTH IN THE IMPACT CRUSHER MARKET WILL BE DRIVEN BY EVERYTHING THAT IS IMPORTANT TO THE CUSTOMER – HIGH PRODUCTION, HIGH QUALITY AND LOWER OPERATING COSTS.” Julie Andras, McCloskey International 14

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

1,300 rpm which gives a reduced noise level compared to standard fans, running at 2,000 rpm or more.”

Rutherford pointed out that adjustments of the impact crusher’s closed-side settings are quickly and easily made on the new Kleemann ‘Spective’ control panel. “The operator uses the large touch screen control panel, which has become more user friendly and intuitive by design. This results in a more time efficient and safer method as the adjustment no longer requires any tooling or manual labour.”

Another improvement is the gap setting adjustment of Kleemann’s impact crusher, a new feature called Zero Point Determination. “This allows the operator to account for wear on the rotor blow bars and recalibrate the machine,” said Rutherford. “This can be done at any time that the operator chooses from the touch screen control panel by bringing the apron and blow bars into contact with one another to ‘zero out’. This process requires no tooling or measurements from the operator and only takes a couple minutes to complete.”

Rotor design can also make a difference.

“Keestrack’s substantially larger and heavier rotor design (on average 40 percent heavier than similar units in its class), allows for high throughput in aggressive primary crushing applications,” Todd said.

He added that by using specialized steel in the frame and components, the transport weight of Keestrack’s R3 impact crusher has dropped by 11 percent. The frame is a very high tensile steel with a strength of St700. The hopper and unit are made of HB450 and HB500 steel. “There is no other compact mobile impactor on the market today that can meet these criteria with such a large crushing chamber and after screen module,” Todd said.

Customization and options

“Impact crushers have also become more versatile, with application specific options and configurations best suited to maximize production,” Andras said.

“Crushers can be put to work with an independent prescreen, underpan or full belt discharge conveyor, overband magnet, side discharge dirt conveyor, hopper extensions, dust suppression including water pump, spraybars, and conveyor covers, or wireless control of tracking and feeder. In addition to this there are various blowbar (hammer) material types and arrangements. Adding a recirculating screen allows a machine to produce a sized and screened product on its own and the operator only needs to feed new material and remove the processed material.”

Track mounted impact crushers are offered in open-circuit or closed-circuit configurations. Rutherford explained that closed loop circuits consist of an onboard final screen with a built-in recirculation

IN-DEPTH REPORT: IMPACT CRUSHERS

MCCLOSKEY I34R conveyor and are often best suited for a client with a limited work area or footprint available. “The onboard final screen is capable of producing high quality product without the need for extra downstream equipment such as screening plants or conveyors. The final screen can easily be removed for added versatility should the client wish to reconfigure their plant as an open circuit.”

Rutherford added that the top deck of the independent double deck prescreen can be fitted with either grizzly bars or perforated plate dependent on the size of desired products. The prescreen bottom deck can make a spec product with the use of the side discharge conveyor or have the material bypass the crusher and discharge via the main discharge conveyor.

“There is a variety of blow bar metallurgies to choose from in order to ensure you get the most production available from wear components dependent on the application,” explained Rutherford. “Martensitic with ceramic inserts offer a wide range of applications whereas chrome or chrome/ceramic can offer longer life of the wear component in higher abrasive applications with a clean feed free of metal.

“An air knife can be a valuable tool added to a machine when you have debris in your feed material that is required to be removed from the final product such as garbage, plastics and vegetation. This will reduce or eliminate the need to have a workforce on a pick-

ing station and can increase throughput of the plant.”

Todd pointed out several features available for Keestrack impact crushers. “The Keestrack Neodym overbelt magnet effectively removes metal debris while offering a lighter weight material separation solution compared to others in the market,” he said.

“For example, the weight of the Neodym magnet on the R6 is approximately 1,200 kg, roughly 400 kg lighter than the conventional ferrite model, thereby significantly lowering the transport weight of the entire machine. The magnetic force is around 300 percent more powerful as well.”

Todd added that their windsifter is designed to remove contaminants such as plastic and wood by means of air flow. “The adjustable outlet angle (by means of the remote control) and the variable air flow enable the Keestrack wind-sifter to be set perfectly to the degree of contamination and material type. This can result in a cleaner and more valuable end product.”

Keestrack also offers an optional, automated dust suppression system. When the crusher is running, a signal to the anti-dust control system activates the dust suppression cannon. For instance, with the R3, a fine mist water droplet system generates droplets of <50 microns in size and uses around 45 litres of water per minute. The high velocity air fan ensures a perfect throw to enclose the dust particles and cause them to fall.

KEESTRACK R6 16

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

Keestrack’s removable genset/drive unit can be located remotely from the crushing plant and its abrasive environment.

Buying tips

“Operating costs are always a consideration and while there are no complex mechanisms or castings like other types of crushers, the entire inside of the impact chamber is subject to abrasive wear,” said Andras. “Liners and blowbars need to be inspected and rotated or replaced to maintain crushing efficiency and prevent the abrasive wear from reaching the main structure. While no machine can be the best at processing every type and size of material, portable tracked horizontal shaft impactors are the closest one can get to this and are extremely versatile.

“Making maximum use of available power from fuel efficient and clean Tier 4 diesel engines, coupled with automated controls, ensure that machines are able to work in the most efficient range and allows maximum fuel efficiency and lowest operating costs per ton,” she added.

Rutherford offered a list of questions that a buyer should consider.

• How often do you anticipate moving from location to location? This can sometimes justify a particular model of machine for transport purposes if you relocate often and have smaller jobs to complete or if you will be working from one main location.

• Do you have the necessary infrastructure needed to run a plant on electric line power or will you require the on-board power from the diesel engine?

• How much production is required of a particular product? In many cases a producer may have the need for multiple saleable products. However, there is usually only one or two main products which make up the majority of their demand and profitability. It is important to consider this when configuring a machine so that all of the client’s priorities are being met.

Andras added: “No matter what the application, versatility and mobility are key considerations for purchasing an impactor, particularly for on-site crushing, and multiple job sites or quarries. Reduction size will also dictate choice, as with any crusher purchase.

“The continued growth in the impact crusher market will be driven by everything that is important to the customer – high production, high quality and lower operating costs. Impact crushers can deliver all three.” HEG

AGGREGATE PROCESSING AND CONCRETE MIXING YOU CAN RELY ON

MOBILE AGGREGATE PROCESSING SBM aggregate processing plants are used to process natural stone or demolished concrete.

More than 120 years of aggregate processing experience has culminated in state-of-the-art crushers that are the highest quality.

NEW ARRIVAL SBM Remax 500 Impact Crusher & Screen CONCRETE MIXING SBM manufactures stationary, mobile, and supermobile concrete batching plants that meet your requirements for speed, quality, and flexibility. Ideal for long-term projects, shortterm projects, and everything in between.

The Remax 500 is perfect for crushing natural rock and recycling materials. This compact crusher can crush up to 500 tonnes of material per hour!

400 KvA Gen-set Engine ▪ 1300 mm Crusher Lateral Discharge Conveyor ▪ 2 Deck Mesh Pre-screen Diesel- electric ▪ 2 Deck Final Screen

RECLAMATION PLANTS RBR mobile and stationary residual concrete reclamation plants are the ideal solution to ensure the efficiency and cost effectiveness of your project, all while minimizing environmental impact.

SALES | RENTALS | PARTS | SERVICE | FINANCING

WWW.TERRAFIRMAEQUIPMENT.COM ▪ INFO@TERRAFIRMAEQUIPMENT.COM 18104 - 111 Avenue, Edmonton AB T5S 2R1

888.240.4098 888.240.4098

ROADBUILDING & REHABILITATION

TODAY’S TECHNOLOGY BOOSTS COLD MILLING PRODUCTIVITY

By Tom Chastain

A

sphalt milling, asphalt grinding and asphalt planing describe the same process by which weathered, oxidized asphalt pavement is removed from a driving surface in varying depths, as specified, done in advance of a fresh asphalt overlay or pavement preservation treatment.

There are powerful environmental advantages to asphalt milling. The product of asphalt milling – reclaimed asphalt pavement (RAP) – is removed and stockpiled, prior to processing into engineered aggregates that are specified for future asphalt mixes.

Instead of sending the RAP to the landfill – as was the case a few decades earlier – reuse of RAP utilizes existing aggregates that have already been surveyed, acquired, permitted, shot, crushed, screened and stockpiled.

Use of RAP preserves virgin ag-

18

HEAVY EQUIPMENT GUIDE

gregates for more critical applications, conserving quarry reserves. RAP also contains residual asphalt which substitutes for virgin asphalt binder in varying amounts, also saving natural resources. Costs to taxpayers are reduced while natural resources are conserved.

Not too long ago, the milling process was considered a necessary evil, in which the paving contractor was forced to mill from time to time to correct a curb line, or scarify a bridge deck.

In the 1970s, asphalt mills were simply drums mounted on motor graders. The first dedicated milling machine in the United States was developed in 1974.

It was derived from a rear load dirt trimmer that had a conical tooth drum installed in lieu of a spade tooth drum, to cut both concrete and asphalt.

In Europe "hot" milling was started in the early 1970s by Wirtgen GmbH, in which asphalt was preheated ahead of the milling process. Then, after pre-

>> APRIL 2019

heating, the milling machine would cut the softened, heated asphalt.

In the mid-1970s, Wirtgen began the transition to cold milling, and in 1978 adapted carbide tools for mining to cold milling, which launched the modern era. In 1979 the Wirtgen 2200 C on three tracks was introduced, followed in 1980 by the 2600 C, the first track-mounted large cold milling machine with a milling width of up to 2.6 metres, or 8.5 feet. In 1984 the 2000 VC was introduced, the first cold milling machine with front-loading conveyor.

A machine that would cut 50 mm (2 inches) in the 1980s at 9 metres per minute (30 fpm) has been replaced by one that can cut up to, and over, 30.5 metres per minute (100 fpm) today.

Thirty years ago, you would mill for an hour or two, then have to work on the machine for an hour. Today’s machines are much more reliable, and downtime is minimal.

Early-on cold mills were equipped with hydraulic sensors. Although those systems were very reliable, today’s milling – with its need to establish a super-smooth substrate for supersmooth HMA pavements – requires a more sophisticated system. Today you can read out dual grade, grade-andslope, stringline sensing, averaging, laser-reference, and GPS coordinates.

One ground man could easily control the grade from either side of the machine, compared to always having two ground men in the past.

Today, contractors seek versatility of machine application to leverage productivity and profitability. Added machine flexibility and utilization means more dollars and higher profits. The most significant technology advance has been the new ability to use one machine for multiple applications.

For example, today you can buy a machine on which a contractor can quickly change cutter patterns, from perhaps a 16 mm (5/8-inch) spacing to

a 6.35 mm (1/4-inch) spacing to fit particular jobsite requirements. You can also fit smaller cutter widths into the same unit to cut a smaller-width cut instead of having to acquire or rent a whole new machine to do that width.

Tips for productive milling

The right machine is essential to a profitable milling project, but there are other elements of a project that will boost productivity. Here are a few of my observations: • Keep crew and cold mill together.

It’s important that an owner keep his crew with a machine as long as he can.

It’s not a good idea to send the crew back to the union hall at the end of the year, and get a new operator and crew the next year that has to be trained all over again on that machine.

When crews stay on a machine month after month, year after year, they understand it, they know what to do on the machine to keep it up and running, they have memory and records of any issues or problems with the machine. Having new crews all the time is not good for a milling operation. The best crews are those that have been with the machine for the life of the machine.

• Truck management. Beyond the cold mill itself, effective truck management will boost productivity of a milling operation. Operators need to be smart when it comes to managing trucks. Today’s machines have high productivity, and if you don’t have the right number of trucks for that that machine to feed and keep it running steady, you will be inefficient. The milling operation should actually mill and load trucks at least 40 to 45 minutes out of the hour.

Therefore the operator needs to balance the trucks, pace himself a bit, and keep the machine running steady.

That’s instead of running the machine wide open, then waiting 15 to 30 minutes for trucks to return.

It makes no difference if the trucks are owned by the milling company, or provided by the prime contractor. Instead it’s a communications issue. The operator needs to meet and communicate with the prime contractor, giving him an idea of how productive his cold mill is, and based on that, weigh out the number of trucks that will be needed.

• Consistency of speed is also important. The more consistent a machine’s speed, the better off the operator will be. It doesn’t make sense to run at full speed, slow down and stop, change trucks, and run at full speed again. That changes the milling pattern significantly; you are better off running at a slower, more consistent speed, as it will result in a lot more precise pattern or texture of cut, and that will benefit the paving operation.

• Water on the fly. Another way of keeping the machine moving is adding water, used to cool the drum and suppress dust, “on-the-fly,” without stopping. While the mill moves forward, a water truck moves parallel with the machine, filling its water tank.

Better cutting tools

Wirtgen’s market position in cold milling machines is based on its core competence in cutting technology.

This covers everything from low-wear cutting tools and the various toolholder systems, all the way to complete milling drums of diverse designs.

All components are specifically tailored to fit the milling machine in which they are used. In addition to the comprehensive range of standard and optional milling drums, Wirtgen offers its customers the design and manufacture of special, customized milling drums.

One example is the new PCD milling tools introduced at World of Asphalt 2019. PCD (polycrystalline diamond) is a highly sophisticated, synthetically manufactured, strong mass of carbon and carbide. The PCD tip consists of differing layers: a concentrate of diamond particles in the upper layer, the interlayers and a tungsten carbide substrate.

PCD cutting tools are particularly suitable for surface layer rehabilitation thanks to their up-to-date tool geometry and material. The very slight lengthwise wear ensures optimum evenness over the milled surface and consistently high machine feed.

Depending on the application, PCD milling tools are a useful addition to the existing pick range featuring conventional carbide tips.

Wirtgen FCS light (Flexible Cutter System) allows for the rapid, easy exchange of same-width milling drums, typically in less than two hours. One machine can be used for a broad range of applications with minimal downtime when exchanging drums.

Wirtgen FCS light flexibility is uniquely suited for PCD tool technology as conventional carbide tools may be more economical for some applications while PCD tools may be more

Top left: Using asphalt milling machines helps save virgin aggregate and reduce pressure on quarries.

Above: Having the same crew stay with a machine over its life builds familiarity, and often aids in diagnosis of problems much faster. Bottom left: Wirtgen machines have many features to ensure a good, smooth cut. economical for others. Wirtgen FCS light provides opportunity for contractors to have the best of both worlds in one machine.

Machines that perform

Beyond the cutting tools, other advanced milling technologies are organic to the machine itself.

Via new microprocessor-controlled enhancements to machine control systems, Wirtgen's WIDRIVE machine management system handles many tasks for the operator in automatic process chains, making it easy to learn how to operate and control Wirtgen mills.

On some mills an optional camera system with two or six cameras is also available to monitor up to six working areas, like the rear of the machine or view into truck hopper, on the control display. A built-in tonnage calculator is available.

Wirtgen mills incorporate the Level Pro and Level Pro Plus system, Wirtgen’s existing automatic leveling system which is highly user-friendly – designed for the milling crew – and regulates the pre-set milling depth and actual readout electronically.

Those leveling systems are instrumental in Wirtgen's exclusive Parallel-to-Surface (PTS) system, which provides precise compliance with working depth, automatically aligning equipped mills parallel to the road surface, ensuring simple, accurate operation of the machine in demanding profiling jobs.

PTS also assists the operator in positioning the machine in the milled cut to initiate the milling process. In automatic mode, the system takes care of all the steps that the operator would otherwise need to select manually, one after another.

With PTS, the operator activates the leveling system at the flick of a switch, and all four crawler track units of the large milling machine are lowered simultaneously at high speed. When the milling drum unit reaches the surface to be milled, the lowering speed is reduced and the milling drum slowly penetrates the material down to the set depth. The automatic process helps to prevent excessive cutting tool wear or even tool failure when milling starts.

Level Pro and Level Pro Plus also are integral to Wirtgen's Intelligent Speed Control system, which incorporates an electronic flow divider that makes the four tracks work in harmony when turning a radius, making for a smoother cut via electronic track control.

The “wasp waist” frame of these cold mills puts the operator in a safe position, with an excellent line of sight to the machine cut edge. This design narrows the machine’s midsection at the critical viewing area on both the left and right sides.

Other innovations include sophisticated joystick steering, and LED indicators for communicating with truck drivers.

Managing fuel consumption

Today, three selectable drum speeds allow the operator to apply the maximum productive effort and reduce tooth consumption at the same time.

Engine rpm varies with machine application loads to reduce fuel consumption. Extra-wide drum widths are available; the W 250i can cut at widths from 2200 mm (7.2 feet) for conventional milling to 4400 mm (14.4 feet) for full-lane milling.

The W 210i and W 250i Dual Motor Concept is the ultimate in “more power, less fuel” technology. The operator can select between one motor and

Manufacturers are working on ways to get more power with less fuel. Use of tomorrow’s machines will result in a cleaner application than in the past. Machines will be safer to operate, more environmentally friendly, and even more reliable. two motors, depending on the type and hardness of the material cut, and only run one motor when not milling during transport, or walking the machine in or out of the cut. This can give up to 18 to 20 percent savings in annual fuel consumption.

For decades, fuel costs have driven innovations in cold mills. Today manufacturers are working on ways to get more power with less fuel. Use of tomorrow’s machines will result in a cleaner application than in the past.

Machines will be safer to operate, more environmentally friendly, and even more reliable than now.

Tom Chastain is applications specialist with Wirtgen America Inc.

APRIL 2019

>> www.heavyequipmentguide.ca 19

ROADBUILDING & REHABILITATION

EFFICIENCY AND QUALITY MARK BOMAG’S RETURN TO COMMERCIAL PAVING

By Lee Toop, Associate Editor

W

orld of Asphalt 2019 brought with it a return to the North American commercial paving market for BOMAG Americas. The company made a big splash with the launch of the BF 300 C-2 track paver on this side of the Atlantic; the six-foot paver has been popular in the European market and buyers here will now get the opportunity to see why.

According to Henry Polk, BOMAG product manager, pavers and mills, the BF 300 models have been working on European and worldwide jobs for the past eight years, and the time has come to take advantage of the North American market’s broad need for paving equipment again. “There’s a huge market there, and there’s a lot of business to go around, so we’re going to tap into that,” he said.

The BF 300 C-2 displayed at World of Asphalt is designed for commercial contractors, with a wide range of hydraulically variable paving widths from 5.6 to 11.2 feet. It works with BOMAG screed extensions that are available in 13.8- and 19.7-inch widths; the screeds use Quick Coupling technology that uses a wedge-and-socket design with a locking handle to offer extended paving widths out to 16.4 feet. Or, if the user wants to go the other way, reduction skids can allow for 2.3-foot paving widths. Needless to say, the unit is flexible for many jobs, which has been popular with the European buyers.

“I think the European market has done well, number one, because of the BOMAG name and quality and the durability that comes along with the BOMAG name worldwide,” Polk said. “But it also fits the market in the European streets – they seem to be a lot narrower and the BF 300 has been very successful there.”

Buyers have also appreciated some unique features that BOMAG has built into the BF 300, most notably the SIDEVIEW system that allows the operator much more visibility.

“The entire platform shifts left and right, and the 20

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

operator’s seat is independent inside that basket. The visibility is unmatched,” Polk described. “Smaller commercial pavers, when they’re pushing a large dump truck, the operator can’t see the dump truck driver or may have other problems. So, with SIDEVIEW, you slide the platform out over the side, beyond the centre of the paver, and that gives the operator direct line of sight with the truck driver in his rear view mirror. It also gives an unobstructed view into the hopper.

That feature has proven popular with customers who have seen the paver so far, Polk noted.

“When I started demoing this machine back in October of last year, that was one of the things the contractor wanted to see, and quite honestly, I wanted to see it myself. The very first contractor who tried that machine was very impressed that he could see the truck driver and see down into the hopper – it’s beneficial for production and safety.”

Heating system cuts fuel costs and time

Another feature on the BF 300 pavers is the MAGMALIFE heating technology, which can heat screed plates to paving temperatures in approximately 20 minutes.

“MAGMALIFE is an aluminum plate... inside the plate is a series of electric heater cores. Those heat up – aluminum heats rapidly and distributes the heat rapidly and evenly,” Polk described. “Those plates are bolted to the screed bottom so that heat is transferred to the screed bottom more evenly and quickly.”

That faster heating time cuts down on fuel costs for contractors, means less time spent waiting for the screed to heat, and ensures that the screed bottom has an even heat signature.

In addition, a Load Control System helps operators ensure greater mat quality through several features.

A screed assist provides operators the opportunity to fine tune mat texture and quality, depending on the mix design. Screed lock also provides a way to reduce bumps in asphalt mats, Polk described.

“When the operator comes to neutral, the screed locks in place, which keeps it from sinking in the mix...

when the machine is put back into gear, there’s an adjustable timer that will keep the screed locked in place for up to five seconds,” he explained. “If the machine is waiting for a truck, it could be waiting 30 minutes, and during that time the head of material on the screed face cools off and turns hard. A conventional screed has no other option but to climb that cold head, and that gives us the bump we’re all used to feeling or seeing. With this system it’s locked so it pulls and shears the cold head off, and then it starts to float.”

The BF 300 C-2 features a 10-ton hopper capacity, allowing for extended paving intervals between asphalt deliveries. It also features a hydraulically folding front hopper gate, in addition to individually controlled hopper wings that clear asphalt from the hopper. Left and right independently controlled slat conveyor assemblies channel material to the spread augers.

Adding to the paver’s cost-effectiveness, the machine is powered by a 74-hp diesel engine, requiring no diesel particulate filter or diesel exhaust fluid to meet Tier 4 Final emissions. BOMAG offers ECONOMODE active engine and hydraulics management to reduce fuel consumption by up to 20 percent. Power for heating the screed comes from a 24-kW 240-V generator belt-driven from the engine.

Polk expects that contractors working on a range of projects will be interested in using the BF 300 C-2.

“We’re going to see it on parking lots, residential streets, city streets, maybe shoulder work on mainline jobs. Because it’s a six- to 12-foot, it fits ideally for golf cart paths, running paths, and I’m quite sure municipalities, public works departments and road crews will see a benefit out of this machine,” he said. “It’s not over width, it’s light enough to basically haul on a flatbed trailer, even with a roller in combination.”

The machine’s debut at World of Asphalt was very well received, Polk said.

“It was a great success – there was a lot of interest in it, and it has been well-received on the demo tour as well. Some customers have actually insisted that we sell it to them right then and there and they’re willing to keep it,” he said. HEG

“easy” is for the other guys

It’s not in your nature to let a challenge go unmet, and it’s not in ours, either. We help you rise to every challenge and move every obstacle. literally.

Doosan® and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. © 2019 Doosan Infracore North America, LLC. All rights reserved.

meet your next workforce at doosanequipment.com/digin

The world is tough.

Be tougher.

Challenges come in a lot of different sizes and no truck takes them on better than the Western Star® 4700.

It was created to help you tackle the toughest jobs and win. Whether as a tractor, or as a truck bodied up the way you need it, the 4700 gives you the edge. And in this world, we could all use a little edge.

FIND YOURS AT WESTERNSTAR.COM Western Star - A Daimler Group Brand WS/MC-A-587 Specifications are subject to change without notice. Western Star Truck Sales, Inc. is registered to ISO 9001:2008 and ISO 14001:2004.

Copyright © 2019 Daimler Trucks North America LLC. All rights reserved. Western Star Truck Sales, Inc. is a subsidiary of Daimler Trucks North America LLC, a Daimler company.

ROADBUILDING & REHABILITATION

The best just got better.

CARLSON PAVING PRODUCTS

ERGONOMIC CONTROLS AND CHOICE OF MATERIAL CONVEYOR SYSTEM Carlson Paving Products unveiled the all-new 2019 CP75 II at World of Asphalt, featuring all-new ergonomic controls and the choice of material conveyor systems. The smallest paver of Carlson’s CP-line, the 17,000-pound CP75 II features a 74 horsepower Deutz turbocharged diesel engine (No DEF) for superior performance and reliability. The platform features the wide-conveyor class’ only one-piece forward tilting hood, side doors and access panel in the hopper for leading access and simple service.

For operators, the 2019 model enhances ergonomics and simplifies operation with all-new control stations. Screed mounted to keep relative to the operator at all times, the platform’s controls now feature electric switch controls, direct connect steering, and folding 4.5-inch LED display for up-to-the-second information on performance and instrument gauges. The control groups are intuitively organized by function.

This paver will be available with the option of two material conveyor systems. Contractors will be able to choose between a traditional wide conveyor chain and slat system, or the patented High Flow Material Conveyor hybrid belt system, depending on their applications and needs. With a fully redesigned frame, the CP75 II does not require hydraulically lifting hoppers. Carlson has built in many innovations into the EZC815 commercial screed that is standard on the 2019 CP75 II. From its 2 percent screed taper, true spring loaded endgates, and a host of other features once reserved for highway-class screeds, the EZC815 achieves solid mat quality and performance in an 8- to 15-foot package.

The enhanced 4700 offers a number of new features to make getting a hard job done even easier.

BE LIGHTER In addition to its other lightweight options, the 4700 is now available with the Cummins X12, which is up to 600 pounds lighter than other medium-bore engines.

CASE CONSTRUCTION EQUIPMENT

NEW SERIES OF SMALL-FRAME VIBRATORY ROLLERS

BE SAFER Along with great handling and visibility, the 4700 now comes with Collision Mitigation, Adaptive Cruise Control and Lane Departure Warning for greater safety and uptime.

Be Tougher/4700SB ULR Crane Heavy Equipment Guide 3.5”x 15” 3.625”x 15.25” 1/4/2019

DYNAPAC NORTH AMERICA

trifugal forces and frequencies at lower RPMs, making the machine more fuel efficient, while selectable dual frequencies (3,480/3,960 VPM) further improve productivity and allows operators to dial the machine in to meet the job’s needs.

Operators can also choose between either automatic or manual vibration engagement to meet their preference and to help avoid damage to the asphalt during starts and stops, while the offset tapered drums reduce asphalt tearing during operation around curves. The units come standard with a 50-gallon water tank with a pressurized water system. DV Series rollers are compatible with the CASE ACE Force Intelligent compaction system, a technology designed to improve compaction quality, requiring fewer passes to reach target specs and resulting in savings in time, fuel costs and machine maintenance.

WST 13422_Be Tougher_4700SB_ULR_Crane_2.25x10 Title: Western Star Pub: WST 13422 Trim Size: InDesign CC Bleed Size: 4cp Close Date:

CASE Construction Equipment has announced a new series of small-frame vibratory rollers.

Available in both double drum and combination (front drum with rear pneumatic tires) configurations, these compact rollers are easy to transport.

Designed with a high curb clearance, no overhangs and a narrow drum width of 37 inches, these compact DV Series rollers are ideal for small- to mid-size compaction applications. The drums can be offset to further improve accessibility, and to improve performance during turns. Visibility is improved with excellent sight lines and an adjustable work station that allows the operator to get the best vantage point down to the drums.

The DV Series combines a compact size, and excellent maneuverability and visibility, with many of the same features found in larger compaction machines. A 33.5 horsepower Tier 4 Final engine delivers high cen-

HEAVY COMPACTION SOLUTION IN BALANCED AND DURABLE MACHINE

File Name: Client: Job #: App: Colors:

The CO4200 VI 66-inch double drum oscillation roller delivers an additional heavy compaction solution for contractors in a highly balanced and durable machine.

The latest oscillation technology offered in Dynapac tandem rollers meets specific needs in the marketplace, particularly compaction in areas where vibration needs to be reduced. The oscillation compaction concept can also help reduce the risk of damage for less qualitative aggregates.

The Dynapac CO4200 VI is equipped with heavy-duty and durable components, including a drum shell fabricated from Hardox 450, an abrasion-resistant steel with a nominal hardness of 450 HBW. This particular grade of Hardox steel provides outstanding dent and abrasion resistance, minimizing wear and tear, and contributing to the overall longevity of the drum. The new roller model also streamlines serviceability by providing easy access to belts and other components through the integration of manholes in the drum. Belts can be accessed and replaced in as little as two hours, ultimately reducing downtime and maximizing productivity at the job site.

Like other Dynapac rollers, the new CO4200 VI also features an extremely balanced operating mass for front and rear modules, weighing in at 11,023 pounds (5,000 kg) and 10,802 pounds (4,900 kg), respectively.

BE MORE PRODUCTIVE The 4700 is now available with our proven Detroit DT12 automated manual transmission that’s easier to operate and ideal for drivers of all experience levels.

Find all the enhanced features at westernstar.com/4700

EARTHMOVING & EXCAVATION

NEW CONTROLS AND OPERATOR FEATURES FOR KOMATSU MOTOR GRADER Low-effort control levers, steering wheel and steering lever, plus larger, more comfortable cab offer a significant improvement in operator comfort and visibility

E

quipped with an EPA Tier 4 Final certified emissions regulations-compliant engine, the new GD655-7 motor grader from Komatsu will be sold concurrently with the current GD655-6 model to offer customers additional choices to meet their needs.

“The GD655-7 provides operators with an all new, ergonomic working environment and the new spacious cab allows more room for operators working long days,” said Bruce Boebel, senior product manager, Komatsu America.

“Operators will appreciate the new low-effort equipment and steering levers, new transmission controls and articulation stop-at-centre feature. Collectively, they significantly reduce operator fatigue,” Boebel said.

Cab and control upgrades

A number of enhancements have been made on the GD655-7, starting right from the operator’s hands. A new, slightly smaller but “right-sized” steering wheel is designed to provide more visibility and give the operator more room in the cab – a convenient addition for long roading sessions with the blade up. A new steering lever allows the operator to keep their hands on the low-effort, work equipment levers and make small steering adjustments, while operating without needing to turn the steering wheel.

New multi-position adjustable arm rests and LH/ RH consoles have power raise/lower and mechanical fore/aft adjustments to precisely adjust to operator preferences.

A new stop-at-centre articulation feature simplifies operation. A new high-capacity air-suspension seat reduces in-cab vibrations, and an operator presence 24

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

monitoring system alerts the operator if they leave the seat before the controls are properly locked out.

Under the hood, the grader’s power comes from the 218-hp EPA Tier 4 Final-certified SAA6D107E-3 engine. Komatsu’s two-mode, three-stage Variable Horsepower Control (VHPC) allows the selection of the appropriate mode, economy or power, to match operating parameters to application requirements for optimal fuel savings.

The Komatsu Diesel Particulate Filter (KDPF) and other aftertreatment components are designed to work in conjunction with the engine for efficiency and long life. More than 98 percent of KDPF regeneration is performed passively, with no action required of the operator and no interference with machine operation.

Improvements to the power train include a new transmission shift lever with finger-operated forward-neutral-reverse switch; this simplifies operation and dramatically reduces required hand movement.

Komatsu’s power shift transmission, designed and built specifically for Komatsu graders, provides onthe-go, full power shifting, as well as inching capability and automatic shifting in the higher ranges.

Dual-mode transmission adds benefits

A dual-mode transmission (eight forward, four reverse) allows operators to benefit from the high travel speeds and reduced fuel consumption of a direct drive, as well as the increased tractive effort and control of a torque converter. An inching pedal gives the operator precise control of machine movement. A full locking differential provides the traction required in the most severe operating conditions The pioneering KOMTRAX system and monitor

provides machine metrics, including KDPF status and DEF-level data, fuel consumption, plus performance information collected and sorted by operator ID. The GD655-7 comes with a wide range of standard features. It is grade control and Topcon 3D-MC plugand-play ready with no aftermarket valve required.

Two five-section hydraulic control valves are standard, enabling the addition of attachments, and are strategically located to improve forward visibility.

The closed-centre Load Sensing (CLSS) hydraulic system, with variable displacement pump, supplies flow and pressure only when required, resulting in less heat and lower fuel consumption.

Blade lift accumulators absorb shocks when the moldboard hits immovable objects. The grader features a circle slip clutch for accidental contact with hidden objects with the moldboard. Greaseless circle wear plates ensure long life.

The grader is equipped with a seven-inch full-colour high-resolution monitor with Ecology Guidance, and also has a separate full-colour rearview monitoring system.

Komatsu has designed the GD655-7 with serviceability in mind. A reversible, variable speed hydraulic fan blows out dust accumulation in the cooler. The machine is equipped with completely sealed and adjustment-free hydraulically actuated wet disc brakes.

Fuel and DEF fills are accessible from ground level, as are engine fills and drains.

All Komatsu GD655-7 units come with Komatsu CARE. Komatsu CARE provides scheduled factory maintenance for the first 2,000 hours or three years including a 50-point inspection at each service, and two complimentary KDPF exchanges in the first five years.

Transform Your Excavator Into an Efficient, Multi-Functional Tool Carrier

DISCOVER WHAT ROTOTILT® CAN DO FOR YOU Backed by over 30 years of experience, Rototilt® transforms your excavator and backhoe, old or new, into a job site moneymaker.

With 400 tilt and 3600 rotation, you can expedite more jobs efficiently, work within confined spaces and increase safety on the job site with reduced manpower.

Rototilt® grows your business. From general excavating to back filling, grading and anything you can think of...Rototilt® does it all, generating tremendous time and labour savings with increased profitability.

See Rototilt® at work, and listen to what our customers say at rototilt.com or go to youtube.com/RototiltNorthAmerica Contact us at: (519) 754-2195

rototilt.com

EARTHMOVING & EXCAVATION

CATERPILLAR

LOADER UPDATES INCLUDE LOWER OPERATING COSTS AND IMPROVED OPERATOR COMFORT 2019 updates for Cat M Series Medium Wheel Loaders (950M – 982M) include technology advances that provide: lower operating costs via extended service intervals; enhanced operator comfort with new seats and suspensions; added machine configurations; expanded productivity measurement tools; remote software update capability; and more.

U.S. EPA Tier 4 Final and EU Stage V models save maintenance costs by extending engine oil, engine oil filter and hydraulic oil filter change intervals from 500 hours up to 1,000 hours.

Based on estimated comparisons of total engine and hydraulic fluids, filters, and sampling costs during a 6,000-hour period, costs can be potentially reduced by 16 to 23 percent.

In addition, several fuel and engine oil filters are being converted from spin-on to cartridge-type.

Benefits of cartridge-type filters include fewer parts to replace at servicing (housing is retained), easier disposal of used elements, and less costly replacement parts.

The “next generation” of seats and suspensions offers three trim levels – comfort, deluxe, and premium plus – and feature high-visibility, seat-adjustment controls, as well as ride stiffness adjustments.

A new “breakthrough” suspension for deluxe and premium plus trim levels increases dampening at the top and bottom of seat travel. The ride stiffness of the seat suspension is adjustable to different settings, allowing operators to tailor seat dampening to individual preferences.

The Cat Advanced Productivity application is a web-based tool used to visualize machine production-related data and complements Cat PAYLOAD, Cat Production Measurement 2.0. The tool is accessed from VisionLink and includes a user-customizable report dashboard, cycle-by-cycle downloadable data, and a list of features for truck and material identification lists.

Remote flash support allows the dealer to push software update files to the customer’s machine and authorizes the user to initiate installation via the dealer service portal.

New configurations in the medium wheel loader lineup include the 982M High Lift, which increases dump clearance under the bucket pin from 15 feet 6 inches, to 16 feet 10 inches (4,743 to 5,143 mm). Configuration changes from the standard 982M include a new lift arm, new tilt cylinder, new tilt link, and the counterweight from the 982M Aggregate Handler.

“THEY JUST WORK BETTER!” A TRUSTED NAME.

“At Selge Construction, we’re a family business. We’ve constructed a wide range of projects, built on a foundation of integrity, industry knowledge and quality workmanship. Selge has gained respect throughout the Midwest for the highest quality work built in the safest way possible. Komatsu builds a quality product that performs as promised and helps us get the job done. That’s why Komatsu works for me!”

Marv Selge / Selge Construction, Inc. / Niles, MI

That’s why I am Komatsu komatsuamerica.com

035 © 2019 Komatsu America Corp. All Rights Reserved

2019-KOMATSU_HeavyEquipGuide_AD-035.indd 1

26

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

3/27/19 11:57 AM

Your complete heavy equipment solution MAXIMIZE PRODUCTIVITY, OVERCOME CHALLENGES Wajax is proud to have served the industries and people that helped build our nation for more than 160 years. We know it’s about more than just getting the job done. It’s about getting it done right.

That’s why we’re committed to delivering solutions that enable you to do more – efficiently, effectively and safely. With over 100 branches from coast-to-coast across Canada, our dedicated team of experts offer customized solutions to support your business needs from start to finish. From world-class products, equipment and parts, technical expertise, and full aftermarket support, we have you covered.

Call Wajax today to find out how we can help you get more done.

1 877 GO WAJAX

COMPACT EQUIPMENT

KNOW WHAT UTILITY PRODUCTS CAN DO FOR YOU

IN ADDITION TO UTILITY VEHICLES, THERE’S ALSO A UTILITY WORK MACHINE OPTION FOR CONTRACTORS

I

t’s not uncommon to see compact loaders and compact excavators in a contractor’s equipment fleet. As utility products become more versatile with the addition of attachment capabilities, an increasing number of contractors are taking a second look at these machines to increase their jobsite productivity.

User-friendly

Utility products have long been popular machines for people in many different market segments. They are an ideal machine to transport people, tools and materials. A big part of utility products’ appeal is that they’re user-friendly. Automotive features such as a steering wheel, foot accelerator and foot brake make it an easy transition for just about anyone to operate a utility vehicle.

And when compared to ATVs, utility products – like utility vehicles – are able to carry and tow more weight. For example, the average two-passenger utility vehicle weighs just over 1,600 pounds and can carry up to 1,250 pounds of cargo while travelling up to 35 mph. To help satisfy customers’ demands, manufacturers have intro-

duced several varieties of utility products. Contractors can choose from 4x4 two-passenger utility vehicles or 4x4 four- and six-passenger utility vehicles.

Multi-passenger utility vehicles could be used as a compact alternative to larger pickup trucks on jobsites.

In addition to utility vehicles, there’s also a utility work machine option for contractors. These machines are ideal for contractors who need all the functionality of a utility vehicle, but more muscle and power. A utility work machine is larger than a utility vehicle, weighing a little less than 6,000 pounds, and it has a cargo capacity between 1,500 to 4,200 pounds. A utility work machine can also do more with the utilization of more than 40 front-mounted attachments.

Utility work machines provide exceptional maneuverability for contractors working in confined areas. With the press of a button, operators can switch from front-wheel steer into allwheel steer mode. Four steerable axles provide a tighter turning radius of 17.5 feet, which is better than a compact tractor, utility vehicle or pickup truck.

All-wheel steer also minimizes tire wear while working on asphalt or con-

crete, and it protects sensitive surfaces such as grass or turf.

If you’re a contractor who already owns a utility vehicle, it’s not hard to transform it into your jobsite’s new workhorse. Different drive modes help operators best match the conditions to the vehicle. There are also several winch-accessory and front- or rear-receiver hitch kits available on the market for utility vehicles. These kits make it relatively easy for owners to connect push-, pull- and lift-type attachments.

For construction, two main attachments are buckets and pallet forks. Other popular ones are a snow blade and mower, says Chris Austinson, utility vehicle and utility work machine product specialist for Bobcat Company.

Attachments add versatility

So how do you know if utility vehicle and utility work machine attachments are right for you? And if they are, how do you decide which attachments to purchase? First, Austinson suggests that contractors deter28

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

mine how they’ll use their utility products and the types of jobs they want it to take on. As with any equipment purchase, the efficiency or productivity that the attachment provides should outweigh its cost.

For many contractors who place an attachment on their utility product for the first time, safety becomes an even greater concern. Austinson advises utility product owners to always be aware of what’s around them when operating the machine with an attachment. And as always, they should wear their seat belts and familiarize themselves with vehicle and attachment owner’s manuals.

In the coming years, Austinson says people shouldn’t be surprised if they see more upgrades to utility products.

As customers demand more power and versatility from what was once known as a “recreational” vehicle, manufacturers will answer the call. They may never take the place of a compact utility loader or skid-steer loader but gone are the days when they were only expected to transport people and things.

You work nonstop. Your equipment should, too. With Wacker Neusonâ&#x20AC;&#x2122;s industry leading warranties, we stand behind our promise of performance and reliability. With a 5-year excavator warranty and unique 3-year standard, 4-year powertrain and 5-year electrical system coverage for skid steer and compact track loaders, we offer an excellent return on investment. So, you can depend on Wacker Neuson to get the job done right.

Contact your Wacker Neuson dealer today.

1-800-201-3346 â&#x20AC;˘ www.wackerneuson.com

COMPACT EQUIPMENT

KUBOTA’S LIGHTEST AND MOST MANEUVERABLE COMPACT TRACK LOADER EVER DESIGNED FOR BIG JOBS IN TIGHT WORK SPACES

K

ubota is positioning the new SVL65-2 compact track loader in a lighter rated operating capacity weight class than the current SVL75-2 and the SVL95-2 models, further diversifying the company’s construction and landscaping equipment offerings.

Designed for big jobs in tight work spaces, the new compact track loader is sure to meet the expectations of operators wanting exciting new features that will increase efficiency. With its exceptional comfort, Kubota says that the new SVL65-2 will delight operators by making their work easier while providing them with superior operational control, power and performance.

“Kubota Canada has set the standard in the landscaping and construction market worldwide, raising the bar in engineering innovation, power and performance with user-friendly serviceability in every one of the models of our compact track loader lines,” says Bob Hickey, president of Kubota Canada Ltd. “With the latest SVL65-2, Kubota carries on with its reputation for quality, comfort and performance, making it an ideal choice for landscapers, rental companies and small contractors.”

Small size, big power

The SVL65-2 is powered by a 68hp engine ready to power through any 30

HEAVY EQUIPMENT GUIDE

job and boasts a wide working range including a rated operating capacity of 2,100 pounds at a 35 percent lift or 3,000 pounds at a 50 percent lift, a reach of 88.65 cm (34.9 inches) and a hinge pin height of 301 cm (118.5 inches). The standard self-levelling feature can be engaged with the flip of a switch and keeps the bucket or forks at level without the need to manually adjust the angle. Plus, multi-function levers provide control of all major vehicle and attachment operations at the operator’s fingertip.

ing to its comfort and convenience.

The spacious cab also includes a standard suspension seat that offers outstanding comfort with ergonomically placed armrests to minimize operator fatigue.

Consistent with the larger models in Kubota’s SVL Series, the SVL65-2 features a sliding front door that can be opened regardless of the position of the bucket or loader arm; full machine operation is possible with the door open, when desired.

“Our newest product in the compact track loaders category further strengthens our construction equipment line. The SVL line represents our commitment to quality and safety for all our customers from coast to coast. Offering this smaller-class size compact track loader to Canadian customers and operators makes Kubota a stronger player in this category,” said Yannick Montagano, vice-president of sales & marketing at Kubota Canada Ltd.

Advanced multifunction valve

The new SVL65-2 features an Advanced Multifunction Valve (AMV) for improved multifunctional operation and allows for smooth operation when using simultaneous controls, such as auxiliary, boom and bucket circuits, allowing operators to be more productive throughout their work day.

The AMV makes running any attachment that uses auxiliary hydraulics easy, particularly attachments such as a grapple bucket, a 4-in-1 bucket or a hydraulic auger.

Exceptional comfort

While the overall footprint of the new SVL65-2 is smaller, the cab is equivalent in size to the SVL752 and SVL95-2s, providing ample room for the operator’s legs and add-

>> APRIL 2019

The SVL65-2 is powered by a 68-hp engine.

WACKER NEUSON’S TWO NEW COMPACT EXCAVATORS BOAST OPERATOR COMFORT, STABILITY, POWER AND SERVICEABILITY

W

acker Neuson has added two new compact excavators that the company says are built for operator comfort, stability, power and serviceability. The 3.6-ton EZ36, and 2.6-ton EZ26 compact excavators both feature a minimal tail swing design and are versatile for a variety of applications.

According to Wacker Neuson, the 3.6-ton-class excavator is one of the most popular sizes in the market.

The company has focused on features and benefits that would stand out in the crowded field. The EZ36 combines the technology and operator comfort of a larger machine in a powerful, yet economical package.

Wacker Neuson says that it has bestin-class dig depth (11 feet 6 inches) and reach (18 feet 6 inches). The EZ36 is highly productive with excellent maneuverability and stability on a minimal-swing machine.

The user-friendly operating concept and comfortable cab starts with the ergonomic joystick, jog dial, keypad and 3.5-inch display all within easy reach and view. The large cab offers plenty of head and legroom, adjustable seat and armrests, ample storage compartments, mobile phone cradle and USB port. The ISO/SAE control pattern changeover switch is conveniently located in the cab, allowing operators to select their preferred pattern quickly.

The air conditioning system keeps the operator cool all day and a unique four position adjustable windshield is ideal for ventilation and jobsite communication. The dual flange roller

system on the undercarriage improves lateral stability while digging and loading, and reduces noise and vibration while travelling.

The EZ36 combines the 24.5-hp Yanmar engine with a load-sensing hydraulic system to optimize a powerful machine in the under-25-horsepower class. Add the optional power angle dozer blade with float function and the EZ36 is a productive excavator on the jobsite.

Wacker Neuson understands the

importance of serviceability. All the daily service checks are easy to see and reach with removable covers and a large hood. The tilting cab and removable ROPS make routine maintenance more convenient and less time consuming.

The EZ26 also offers a modern design, comfortable cab with wide entry, ergonomic controls and quick, cost-saving maintenance access. The 2.6-ton unit is ideal for working in tight spaces. It’s easy to transport

with eight tie-downs, six on the track and two on the dozer blade. Powered by a 20.4-hp Yanmar Tier 4 Final engine, the EZ26 has a dig depth of 9 feet and maximum reach of 15 feet 5 inches.

Both the EZ36 and EZ26 are available with Wacker Neuson’s exclusive Vertical Digging System (VDS).

VDS enables progressive tilting of the superstructure by up to 15 degrees to compensate for slopes, saving up to 25 percent on material and time costs.

GO AHEAD, BRING YOUR HEAVY TOOLS THE NEW S®-80 XC™ & S-85 XC

660 1000 Xtra Capacity™

660 lb of Unrestricted Movement & 1000 lb Max

Optional Genie® Lift Power™ System

Intuitive CAN-based Control System SmartLink™ features

LEARN MORE AT GENIELIFT.COM/S80-85XC © 2018 Terex Corporation. Terex, Genie and S are trademarks of Terex Corporation or its subsidiaries.

APRIL 2019

>> www.heavyequipmentguide.ca 31

COMPACT EQUIPMENT

GENIE ADDS TWO MORE XC MODELS TO LINEUP

G

enie’s S-40 and S-45 telescopic booms have been updated to incorporate Genie Xtra Capacity (XC) features.

The new Genie telescopic S-40 XC and S-45 XC booms now offer a dual-lift capacity of 660 pounds (300 kg) unrestricted and 1,000 pounds (454 kg) restricted, giving these aerial lifts the ability to perform a wider range of heavier lift tasks on construction and industrial jobsites. These models can work with up to three people in the platform while still leaving room for tools and jobsite materials.

XC models comply with the platform load sensing requirements in the new ANSI A92 and CSA B354 industry standards in North America.

“With the new ANSI A92 and CSA B354 industry standards changes coming in North America, we took the opportunity to not just update these popular models but to completely redesign them to incorporate all of the advantages of the Genie Xtra Capacity (XC) features,” says Corrado Gentile, Genie product manager, Terex AWP, “along with compatibility to our new generation of accessories and options including the Genie Lift Power generator system and the Genie Tech Pro Link handheld diagnostics tool. The new Genie S-40 XC and S-45 XC telescopic boom lifts are the modern versions of their popular predecessors.”

32

HEAVY EQUIPMENT GUIDE

New features

Automatic envelope control gives these machines the ability to automatically retract as the booms reach their operating envelope; it also allows for precise platform positioning and an enhanced operator experience.

The new Genie S-40 XC and S-45 XC units are equipped with a load sense cell that continuously checks the weight in the platform and limits the operating envelope to match the load chart, all while boasting the ability to do zero-load field calibrations. According to Genie, the redesigned boom structure boasts increased performance, range of motion and envelope control, as well as a robust jib on the Genie S-45 XC model that is capable of easily handling the 1,000-pound (454-kg) maximum capacity.

These new Genie XC telescopic booms also come equipped with a chassis tilt sensor incorporated into the machines’ function. The technology in this new sensor is engineered to automatically cut out certain lift and drive functions of the machines when the tilt activation setting is reached. “And, we’ve designed our new chassis tilt sensor to restrict the machine’s range of motion based on the ground angle,” says Gentile. “This new technology gives the new Genie S-40 XC and S-45 XC booms the ability to carry more load than ever before; it has the ability to vary the platform envelope based on the ground slope to maximize these

>> APRIL 2019

models’ ability to access hard-to-reach work areas on challenging jobsites.”

Maintenance made simple

Gentile says, “As we modernized these booms, we stayed focused on user interface and simplicity to maintain the machines’ ease of use and deliver the high rental return on invested capital (rROIC) that your business relies on. For example, these new Genie XC models have been updated with a state-of-the-art CAN-based control system, which incorporates the familiar Genie Smart Link control system features. Operators will find the control layout on these booms to be consistent and intuitive, making the operation of the booms easy and straightforward.”

These models also feature onboard diagnostics. Available at the new ground-level LCD screen, the system allows for machine setup, calibration and troubleshooting right on the machine – no need for a laptop or any additional accessories.

The new CAN-based control system also allows more data to be remotely monitored than ever before.

“With the new Genie Tech Pro Link diagnostics tool, everything service technicians need to know is right in the palm of your hand,” says Gentile.

“It allows you to monitor the machine’s gauges, including engine temperature, oil pressure, fuel levels and battery voltage, calibrate the machine,

make speed adjustments during your pre-operation inspection, get service alerts and reminders, track maintenance intervals, receive fault code information and so much more.”

Power and productivity

The Genie S-40 XC and S-45 XC models also feature the new Genie Lift Power generator solution. The new system includes a dedicated hydraulic circuit, a right-sized breaker and no pressure switch to reliably power the generator. The dedicated circuit also runs cooler and enables operators to lift and drive during generator operation.

For North America, an all-new 3-kW 120V (60 Hz) generator will efficiently supply power to meet jobsite demands. A three-phase, 240V (60 Hz) 12-kW generator solution is uniquely configured for boom operators to run heavy-duty welding machines.

The Genie S-40 XC boasts a 39 foot 6 inch (12 m) working height with 31 feet 1 inch (9.7 m) of outreach.

The Genie S-45 XC has 44 feet 6 inches (13.6 m) of working height with 36 feet 2 inches (11 m) of outreach.

Both units are equipped with a 48hp (37-kW) Tier 4 Final diesel engine.

The Genie XC boom design also includes a 6-foot (1.83-m) or an 8-foot (2.44-m) tri-entry platform with side-swing gate to make it easy to get people, tools and jobsite materials in and out of the basket.

JCB

SUBCOMPACT LOADALL TELEHANDLER OFFERS 4,000-POUND LIFT CAPACITY

JCB says that they have launched the 504-13 Loadall subcompact telescopic handler in response to growing demand in North America for telehandlers in the sub-6,000-pound category. With a 4,000-pound lift capacity and maximum lift height of 13 feet 3 inches, the new telehandler is well-suited to maintenance applications, jobsite cleanup and material handling within confined worksites.

The new 504-13 telehandler builds on the design and capability characteristics of the company’s earlier JCB 520-40 Loadall, with the addition of a new 39-hp Perkins Tier 4 Final–compliant diesel engine.

Other features include: all-steel bodywork; permanent four-wheel steering for enhanced maneuverability; low boom profile for exceptional visibility, enabling improved productivity and safety; compact tool carrier or skid-steer coupler for attachments to accommodate a wide array of attachments and applications; two-speed hydrostatic transmission; and a two-year/2,000-hour warranty.

The 504-13 Loadall features JCB’s U-pressed steel boom with fewer welds and stress points than competing brands.

JCB Loadall telehandlers have 500hour extended service intervals and simplified maintenance procedures, with all daily checks performed at ground level.

CHICAGO PNEUMATIC

ROTARY SCREW PORTABLE COMPRESSOR

UPGR ADE

[ YOUR ] BL ADE GET EARTHMOVING AND FINE GRADING FROM ONE MACHINE. The 950K SmartGrade™ Dozer from John Deere is the only dozer of its size with fully-integrated 3D grade control and a 6-way power angle tilt (PAT) blade. So it can do everything from mass excavation to fine grading, with no external masts or cables.

It’s the smart choice to help you Run Your World.

Chicago Pneumatic Power Technique’s new CPS 250 is a single-stage, oil-injected, rotary screw portable compressor. Featuring new pressure adjusted through cognitive electronics (PACE) technology, the operator can now control the pressure of the machine.

The new intuitive XC2003 controller is coupled with PACE functionality and adjusts the pressure in increments of two PSI. The operator can also toggle between two predefined set points.

CP increased the operating range of the compressor in the 100–150 PSI range, making the machine more versatile and user friendly.

Powered by a Tier 4 Final liquid-cooled four-cylinder turbocharged Kubota diesel engine, the CPS 250 runs at 65 hp. The exhaust treatment system is a DPF in DOC. The unit’s cooling system consists of an integrated side-by-side aluminium oil cooler with axial fan for optimum cooling. Designed for a higher maximum working pressure, the air and oil separator is equipped with a high pressure sealed and certified safety relief valve and automatic blowdown valve.

It has a hard hat canopy in a sound-attenuated Zincor steel enclosure. The unit comes with a spillage-free frame as standard with 110 percent fluid containment.

JohnDeere.ca/SmartGrade

39137-2_7.5x10.indd 1

APRIL 2019

3/28/19 12:27 PM

>> www.heavyequipmentguide.ca 33

RENTAL SPOTLIGHT

USING RENTAL TO CREATE PRODUCT DEMAND Compact tracked scissor lift is new to Canada and the first of its kind

By Nathan Medcalf

R

ental has been growing at an exponential rate for years and its growth is expected in the near future to continue to outpace both gross domestic product and general construction activity. The American Rental Association forecasts equipment rental revenue will grow from $5.35 billion in 2018 to $6.125 billion in 2021, which translates into growth rates between four and five percent each year.

James Ricardo, owner of Momentum Lift Equipment, has rented and used a lot of different brands of access equipment in his career and wanted to start his own equipment rental company. He knew he would have to offer something unique from what is currently on the market in order to compete against the large and well-established rental companies.

“I came across the Spider crawler boom and remember being impressed with the machine’s safety features and greater access potential than most access machines. So, I bought two machines and, since there aren’t many machines like this in the market and because it’s such a great product, I founded Momentum Lift Equipment and began representing the company in Ontario,” says Ricardo.

“There are various uses for these machines,” says Frank Genua, Momentum sales manager. “We’re doing a lot of demos for construction companies, general builders, mixed maintenance and arborists in order to create demand.”

The Italian job

Successful rental rates of the first two machines encouraged Ricardo to purchase more machines and to represent another manufacturer – Almacrawler s.r.l (Almac). By representing Almac, Momentum increases their rental equipment choices by offering special and unique scissor lifts to their rental fleet.

“This Almac scissor lift is the only one of its kind in Canada,” 34

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

says Genua. “The compact tracked machine uses a BI-levelling system, which means end users can travel on grades with their scissor lift platform fully extended without having to stop each time to reposition. It is a great product.”

Scissor lifts are generally wheeled and equipped with a mechanism that prevents them from travelling on grades above a certain degree, because doing so is considered too risky. Attempting to traverse a steep grade with a traditional scissor lift results in an uneven platform and a sudden shift in weight that can “throw” the operator and topple the machine.

In a scenario where end-users have a traditional scissor lift and are expected to move it in an environment with grades or uneven surfaces or rough terrain, they drive the machine to reach the place of work, then lower the platform on the scissor before travelling to the next spot, where they must lift the platform once again.

Not having to lower and extend the scissor constantly will save time on each move, improving efficiency.

The patented BI-levelling undercarriage includes automatic lateral and longitudinal levelling that are able to offer performance, safety and comfort even in the most extreme conditions.

This feature is especially useful for constructing the outer shells of buildings and other work where the scissor lift has to be moved just a few feet each time. In these cases, it takes more time to lower/raise the machine than it does to travel.

The new generation of Almac machines feature the latest model of the automatic BI-levelling system, which is able to overcome longitudinal slopes of 20 degrees and lateral slopes of 15 degrees. Plus, the machine’s tracks plus the double thermic and electric motorization or battery version also available, allowing it to work well both in indoor and outdoor applications.

Marco Scarano, general manager of Elevateur Srl, a rental company and

distributor of AlmaCrawler products in Campania – Naples Area, Italy, also saw the advantage of the new Almac machines.

“I added a couple of units in my rental fleet to promote and present to my base of customers. [My customers have] immediately understood the problem-solving potential. Furthermore, I have recently purchased two other new Bibi 1090-BL EVO. I am convinced that this machine, thanks to its greater operating height, the dimensions of the basket, proactive levelling at height together with the unique BI-levelling system, will certainly be even more appreciated by my clients,” says Scarano.

Tied at the hip

Almac and Momentum Lift are tying themselves at the hip, when it comes to market growth in Canada.

Instead of setting up representatives moving only toward big rental companies Almac is reinforcing its presence in North America partnering with Momentum, and will grow in Canada as Momentum grows.

“The idea is to grow together because we share the same approach,” says Jonathan Vioni, export area manager, Almac. “We think it’s important to work with someone who can create the market demand, because, as I said before, this is a new concept and problem-solving machines. People are looking for return on investment. They want to know how it will make them more money and save time in their daily activities. This unique concept is the right product that can help users to comprehend that now there is something that can improve the quality of their daily activities. To understand this, people need to use these machines and be conscious that the BI-levelling

scissor can help.”

“We have to start as a rental company in order to generate awareness about our product lines,” says Genua.

“Although these machines are popular in Europe, they are still relatively unknown in Canada. We have to change the trend. [They offer] productivity, safety, convenience and cost savings.

These new machines have all of those features and contractors want machines with those features.”

The business plan is to rent to contractors in order to create a demand.

Large rental companies who rent to the contractors will see the demand for Almac and Spider machines and want some machines for their rental fleets, so they can rent them to their customers. Then, Momentum will collocate the machines directly to the rental companies. “The long-term goal is to be large enough that we can direct potential customers to the rental companies to get our products,” says Genua.

“We see the Canadian market as a big potential for our product,” says Vioni. “There are a lot of construction projects, and as we are the latest player in the access industry, we try to act different, offering a high-quality, innovative, and very reliable product that can be used not only for specific applications but also on daily jobs . . . And as we have seen from adoption rates in Europe and Australia, we are sure that North America is ready to welcome this unique concept along with standard products in the construction industry thanks to its full versatility. We offer solutions and thanks to Momentum’s work, the comprehension of this concept can be sped up.”

Mechanic Trucks and Cranes by Stellar Industries offer the most innovative features in the industry with revolutionary solutions as our standard.

Nathan Medcalf is a construction writer.

FIND YOUR SOLUTION TODAY!

An Almac tracked scissor lift is compact and comes equipped with a patented BI-levelling system that includes lateral and longitudinal inclinations that are able to offer performance, safety and comfort even in extreme conditions.

www

STELLARINDUSTRIES.COM APRIL 2019

800.923.3741

>> www.heavyequipmentguide.ca 35

EQUIPMENT MAINTENANCE & MANAGEMENT

7 STEPS TO EFFECTIVE WHEEL LOADER MAINTENANCE

Performing routine maintenance is critical to safety and productivity

W

e know we are all creatures of habit.

Without even realizing it, you have established patterns that structure and fill most of your days – starting with the time you tell your alarm to get you out of bed, to your method for moving material with your wheel loader. While you may tweak your schedule periodically, much of what you do on a daily basis flows from the rhythm of routine.

So, it would stand to reason that owners and operators would have a similar approach to routine maintenance on a wheel loader – conducting the same inspections and check lists in the same order at the same time every day… right? Not exactly. When business is good and schedules are hectic, you might rationalize that stretching maintenance intervals or cutting corners would not be too damaging.

Unfortunately, that is a habit that can take its toll on the performance of your machine and ultimately impact your productivity. Daily preventive maintenance is important because your machine needs it.

“Routine daily maintenance and good pre- and post-use inspections on a wheel loader are critical to keeping safety first and productivity high,” said Aaron Kleingartner, Doosan Infracore North America marketing manager.

By following a routine daily maintenance schedule that methodically examines seven key systems and components from the ground up, you can ensure that you will not only prevent many issues from developing, but you can extend your machine’s life cycle.

Properly trained operators – There is no routine maintenance plan that will be effective if fleet managers, service technicians and operators aren’t educated on current maintenance methods and procedures. If you are going to perform a majority of your wheel loader’s maintenance yourself, seek the rec36

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

ommendations of your manufacturer’s maintenance manual for intervals and check lists. Ideally, you’ll also want to obtain maintenance training and assistance from your equipment dealer on proper techniques.

Attachment cutting edges – Regardless of the application, loading and unloading material all day can create excessive wear on a loader’s ground-engaging tools. To ensure these high-impact tools stay in peak operating condition, fleet maintenance managers need to perform daily visual inspections of buckets, looking for loose, cracked or missing teeth, and repairing or replacing compromised components as soon as possible.

A wheel loader’s attachments such as buckets and pallet forks are some of the most popular and hard-working tools in mining and quarry applications, and should receive the same attention as the machine itself. Visual checks of these components should include hoses and tilt and lift cylinders to determine if wear is developing or damage has occurred.

There are other items on bigger buckets that have a working life as well. Examine the condition of wear plates and bolted-on cutting edges, as well as attachment pins to make certain they fit snugly and properly.

Tire treads and inflation – Undetected leaks or improper inflation can lead to premature wear and potentially tire failure over time. Owners, fleet managers and operators need to be familiar with their wheel loader’s maintenance manual’s recommendations for proper psi and inflate the tires accordingly.

“In addition to maintaining the correct pressure, routine maintenance and inspection of tires also requires a thorough visual inspection to detect sizeable chunks of tread that may be missing and to ensure that the bead line and the rim are intact,” Kleingartner said.

Driving and parking brakes – Well-maintained and properly working brakes are one of the most

Routine daily maintenance and good pre- and post-use inspections on a wheel loader are critical to keeping safety first and productivity high.

Aaron Kleingartner, marketing manager, Doosan Infracore North America critical routine maintenance procedures required on a wheel loader – at all times. Many construction applications will contain congested work sites, often with grades, and multiple pieces of equipment and vehicles.

In addition to normal loading procedures, there can be a lot of quick stops. For these reasons, operators must be able to halt their equipment, but also hold it with the machine’s parking brake whenever necessary.

Driveline seals and axles – Working in wet conditions such as those found in construction, agricultural and concrete plant environments can create a material build-up along the driveline that may mask a potential problem. Keeping that area of the machine clean will allow for a better inspection to identify leaks at the seals and the axles.

Fluids, oils, filters – Moving up to the engine compartment, Kleingartner points out that fluids such as engine oil and coolants are among the most important routine maintenance elements. Using dipsticks

EQUIPMENT MAINTENANCE & MANAGEMENT

Fluids are key to equipment health. Fill the machine at the recommended intervals with the appropriate fluids.

WEAR PLATE VERSCHLEISSFESTER STAHL

STAND

3001

BELG

COMES IUM TO YOU

!

www.QUARD.ME

SUPERIOR WORKABILITY FOR INCREASED PRODUCTIVITY

and sight glasses will provide accurate guidance for these checks, as will referring to the operator’s manual for instructions on filling the machine at the recommended intervals with the appropriate fluid in the correct increments.

Kleingartner also suggests that owners, operators and technicians stay on track with fluid checks and resist the temptation to use non-OEM specified filters. “It is important to make sure you’re monitoring the same quality performance over the course of recommended maintenance intervals and achieving the best filtration properties,” he said.

New wheel loaders entering the market have been engineered with engine after-treatment systems designed to clean diesel engine exhaust and meet the EPA’s emission standards for Tier 4-compliant engines. While each equipment manufacturer has a slightly different emission strategy, it’s more important than ever to follow their guidelines for maintenance and service. Whether a manufacturer’s diesel after-treatment system is a cooled exhaust gas recirculation (CEGR) or the selective catalyst reduction (SCR) technology – or a combination of the two – these new technologies require advanced fluids to avoid costly repairs.

For instance, all machines using the CEGR with a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF) must use American Petroleum Institute (API)-rated CJ-4 oil (sometimes referred to as low-ash oil) to help reduce the amount of particulate matter in the DPF. Also, since sulphur is a significant contributor to diesel exhaust pollutants, the catalyst system used with Tier 4-compliant engines is dependent on ultra-low sulphur diesel (ULSD). It has significantly less sulphur compared to prior diesel fuels.

Cooling system – Finally, several types of work sites generate enough dust to become a factor for wheel loader cooling systems. Environments like aggregate quarries may need additional preventive measures. Many manufacturers have also incorporated variable-speed reversible fans to help clean the cooling system.

“If you don’t use a reversible fan in dusty conditions, somebody in the maintenance department is going to be working on the cooling group more than they need to,” Kleingartner said.

Equipment managers should also be sure to use an engine pre-cleaner to protect the engine cooling group.

Approaching daily maintenance with the same diligence as you do your other daily routines will help develop good habits that will eventually become standard work. A comprehensive seven-point plan that starts from the ground up and is based on your manufacturer’s specific recommendations will impact your overall business – and the good health of your wheel loader depends on it.

Aaron Kleingartner is the marketing manager for Doosan Infracore North America, LLC.

38

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

GROENEVELD

COMPLETE LINE OF INNOVATIVE LUBRICATION SYSTEMS A new series of innovative OEM lubrication systems has been launched by Groeneveld (part of the Timken Company) that sets itself apart as a brand-new concept reshaping the autolube market.

Modular best describes the progressive new offering. The control unit is available in two versions; without advanced functionality (GPA) and fully monitored (GPA+). The core of the system comes in two executions; 12 and 24 volts. The paddle, cartridge and follower plate reservoir are available in a wide range of capacities, and all components are interchangeable. That makes it possible to offer a basic autolube system ex-factory which the OEMD, dealer or the end-user eventually can upgrade with a more advanced control unit when the need arises. The extensive options enable customers to order the lubrication system that will best meet their needs. Specifically designed for in-line fitment on medium wheel loaders and excavators, the GPA and GPA+ offer significant benefits. The modular concept allows for easy installation and service. The GPA with a paddle reservoir is the standard version, while the GPA+ with a follower plate enables customers to monitor the system and program it with an integrated push button display. Also, the GPA+ with cartridge is the perfect system for rental companies because the system is fully monitored and can be easily refilled onthe-go with a new cartridge.

TKing HeavyHaul Team HEG 1_Layout 1 10/2/18 9:29 PM Page 1

BRIDGESTONE AMERICAS, INC.

EXPANDED LINE OF ALL TRACTION RADIAL TIRES

T R A I L

K I N G

MOVING THE WORLD

TOGETHER S P E C I A L I Z E D

Bridgestone Americas, Inc. has announced that is expanding its popular Firestone VersaBuilt All Traction (AT) radial tire line.

Designed primarily for loaders and graders, the new Firestone VersaBuilt AT 14.00R24 tire is engineered to provide improved traction, versatility and dependable performance in a variety of environments, helping deliver improved productivity on the jobsite.

The Firestone VersaBuilt AT line is designed for improved traction with increased tire life. All sizes feature a heavy-duty all-steel casing and a SideArmor sidewall that deflects stones and debris to help protect against cuts and punctures.

Additionally, a self-cleaning tread pattern allows for more traction in soft and muddy surfaces.

Other key features of the Firestone VersaBuilt AT tire line include: • A non-directional pattern to promote even wear over time; • A tough, proprietary compound for long wear life and cut-resistance; and • An open-shoulder design to provide additional traction.

T R A N S P O R T

Trail King and Goldhofer are teaming up to promote and support each other’s products both in the United States and around the world. Together, Goldhofer and Trail King will provide the most comprehensive line of customized hauling solutions and services. Contact us to learn how to Move the World Together!

NEED A UNIQUE HAULING SOLUTION?

Contact your nearest TRAIL KING dealer, call 800-843-3324 or visit us online to learn more.

www.TrailKing.com

FOLLOW US ON @HeavyEquipGuide

APRIL 2019

>> www.heavyequipmentguide.ca 39

CONSTRUCTION BUSINESS MANAGEMENT XX

CHANGING SAFETY CULTURE

Breaking through the paper jam that can cut down on safety plan buy-in is becoming easier Your personnel at the home office who see the data coming in know who’s doing what and what’s going on in the field – they have a real-time pull of data from the field, which is important. If they run the analytics, they can catch problems before they become a major incident.

By Lee Toop, Associate Editor

Stacey McCroskey, product manager, HCSS Safety

40

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

O

n today’s construction jobsites, the way in which contractors and their employees approach safety has changed dramatically. Where safety was often an afterthought in the past, today there is a strong focus on making it a part of workplace culture – an overlying piece of every day’s work that ensures everyone goes home safely at the end of every shift.

The challenge with establishing and expanding a safety culture on heavy equipment jobs has rarely been a lack of interest, but a lack of time to deal with the inevitable byproduct of a well-designed safety plan: the documentation. With more and more construction software companies bringing solutions for safety onto the market, though, the opportunities for growth in safety planning are expanding.

One problem with the traditional safety plan developed by many organizations is that it’s done at a high level by a safety director, and then is implemented from that high level. Stacey McCroskey, product manager for HCSS Safety, said that meant that there was less buy-in with workers on the ground.

“The safety is always high when the safety director is on a construction site, and then that tends to diminish when they have moved on to the next site,” she related.

Those plans are often well rooted in the office, which comes – especially in construction companies, which are often still catching up with their peers when it comes to technology – with a lot of paper. When an organization has been using paper documentation as its basis for years, it’s hard to encourage a move towards less cumbersome and more functional approaches, McCroskey said.

“Paper’s still the primary competi-

tor in the industry because companies are still saying ‘We’ve been doing this for four generations, I don’t know why you’re trying to make us change now,’” she said. “The primary weakness of paper is that when you get a pile of paper in front of you, how do you know which piece is going to tell you where the potential next problem is?”

When it comes time to seek out records of specific activities taken under

Delivering safety programs through mobile devices (top) can save time and improve staff involvement. HCSS Safety (above) allows for simple checklists, photographs and other documentation to be recorded.

the company’s safety plan, paper becomes even more of a problem, simply through its volume.

“If an incident happens or they need to pull paperwork for some sort of litigation, you’ve got boxes and boxes of banker boxes in a warehouse somewhere that you need to search to find the one piece of paper to show you did hold a safety meeting on a particular topic,” McCroskey said. “The amount of paperwork just gets crazy… you’ve got these mountains of paperwork that they’re trying to maintain.”

Depending on the company, there are any number of activities that need a paper trail, from toolbox safety talks to pre-work site inspections or equipment inspections.

“It can get quite complicated. Your subcontractor may be working multiple different jobs for multiple general contractors that each have their own set of forms,” McCroskey said.

It’s the constant need to stop and fill out paperwork that helps sell electronic systems and software solutions to reluctant construction industry members, she said.

“It eventually saves you time – you won’t need to fill out two pages of paper to do an inspection, and instead you’re just clicking on buttons. It frees up your safety person, who doesn’t need to chase around paperwork – because a lot of time the paper gets stuck in a foreman’s pickup, gets stuff spilled on it, or gets crumpled up,” she noted. “I can’t say that all of them are excited about moving to technology and off paper.

Once they start using it, they find they love it because it does save them time.”

Solutions like HCSS Safety take the paperwork out of the equation and offer the entire company flexibility and mobility, from the work site to the office. In addition, they offer users an easier way to conduct the safety activities that are part of the daily routine and greater opportunity for head office to analyze the efforts over time.

On the jobsite, crew members are able to access HCSS Safety through an iPad, with a variety of functions, McCroskey said.

“We have a library of prepared safety presentations or toolbox talks, so the foreman pulls up the talk and it has their talking points ready for them.

They can take a picture of the crew or have them sign off with their finger on a signature pad… that is in a manager’s system back at the home office within five seconds,” she said.

Having a portable interface makes the toughest part of implementing a safety program – the confirmation that it’s been delivered – easier. It also helps with transition for staff who may not be comfortable with technology.

“A lot of times when we go out and do field training with the foremen, a lot of them have never held an iPad or had smartphones,” McCroskey said.

“We try to keep things simple on the field app, but the great thing is that once you do get the field involved, you raise the level of awareness and now

they’re paying attention to safety, even if it’s just in the back of their minds.”

Once meetings and inspections begin using the mobile interface, head office gets another benefit: more data, and more analytics that can help with monitoring effectiveness of the current safety structure in the company.

“You can look at leading indicators to try to predict where there might be problems, or where you need additional training,” McCroskey described. “Your personnel at the home office who see the data coming in know who’s doing what and what’s going on in the field – they have a real-time pull of data from

the field, which is important. If they run the analytics, they can catch problems before they become a major incident. Over time, that helps them lower their insurance premiums.”

Adapting a company to use the new solutions is generally fairly easy, especially when everyone buys in to the lighter paperwork load. Generally, companies will send teams to HCSS, for example, and spend a week being trained on the new system, how the software operates and how to manage the data, among other things, so that they can return and train others.

HCSS will also send trainers to work

2019

with foremen and others on the jobsite.

Both large and small construction companies are taking up software solutions for their safety plans now, McCroskey reported. While the big players have always had safety programs in place, the smaller operations have sometimes lagged behind.

“I think with smaller companies part of it may be the introduction of millennials into the workforce – they expect a bit of technology,” she said. “We’re definitely seeing smaller companies start to develop safety programs, even if they’re just really small – at least it’s something.” HEG

I WILL BE IN MONTREAL APRIL 28 - MAY 1

INNOVATION IS NOW.

INTERACTION • IMPACT • INFORMATION • INNOVATION • INTELLIGENCE • INFLUENCE •

CONVENTION.CIM.ORG APRIL 2019

>> www.heavyequipmentguide.ca 41

ANNUAL ATTACHMENTS GUIDE

BUCKETS AMI GRAPTOR BUCKET The Graptor Bucket for excavators and backhoe loaders is ideal for handling large, heavy objects or grabbing bucketfuls of debris.

• Powered by a helical actuator fitted into the crossbar, the Graptor features holding strength up to 54,000 ft.-lbs. of torque at 3,000 psi.

• The Graptor’s superior grip confidently handles heavy and awkward loads throughout the full rotation of the bucket.

• Made with Hardox and Strenx, the Graptor’s aggressive serrated side bars, welded in place, provide maximum grip for abrasive applications.

Remu STANDARD SCREENING BUCKETS Remu’s EE/EP series of screening buckets includes eight different models for loaders and excavators ranging from 3 to 40 tons.

• Exert a maximum pressure as low as 110 bar (1,650 psi) and as high as 250 bar (3,750 psi).

• Offer bucket volumes ranging from 0.15 cubic metres (0.18 cubic yards) to 4.2 cubic metres (5.00 cubic yards).

• Facilitate maximum flows of 25 L/min (6 gal/min) to 235 L/min (60 gal/min).

• Screening areas range from 0.2 square metres (2.2 square feet) to 2.5 square metres (27 square feet).

42

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

ALLU TRANSFORMER DL SCREENER BUCKET This screener is for compact base machines such as mini excavators, skid steers and backhoes.

• Ideal for screening, mixing, aerating and loading topsoil, peat and compost.

• Change screen sizes from 5/8 inch to 1 1/4 inches to 2 inches, by changing out the screen and hammers.

• Does not require a case drain line for operation, allowing the operator to simply attach the bucket and start screening.

• Allows rental companies to increase their fleet utilization, as they rent out two machines at once – the carrier and the attachment.

MB Crusher SCREENING BUCKETS MB-LS Series screening buckets are suitable for skid-steer loaders, wheel loaders and backhoes.

• Designed with a conveyor system to eliminate friction during material loading.

• Flat base makes transport easy.

• MB-LS140 for skid-steer loaders from 2.6 tons; MBLS170 for wheel loaders and backhoes from 6.5 to 11 tons; MB-LS220 for backhoes and wheel loaders from 12 to 25 tons.

Okada America SCREENING BUCKETS The TMB Series is ideal for screening C&D debris out of soil and sand to make recycling efficient and keep dumping requirements to a minimum.

• Two-way drum rotation or operation in a single direction with a drum rotation speed that can be fine-tuned.

• Four sizes for carriers 6 to 40 tons.

• Compact design is lightweight and easy to operate.

• Built-in control valve regulates flow and pressure eliminating the need for costly plumbing.

• Double-acting single pump flow kit also runs a grapple, crusher or shear.

• Rotation drum consists of four easily replaced bolton concave screens.

• Assortment of screen sizes are available from 3/8 to 4 inches.

Geith HEAVY-DUTY BUCKETS Geith’s heavy-duty buckets are suitable for light and heavy construction work as well as more demanding excavating conditions.

• Diamond folded top section for greater structural strength.

• Deep profile for high capacity.

• Grading buckets available with bolt-on cutting edge.

• Overlapping plate reduces stresses in critical areas.

• Dual radius shape increases heel clearance.

HEG_RMT-VEI_201904.pdf

BUCKET CRUSHERS

1

19-03-19

17:07

ONBOARD WEIGHING SYSTEMS

SPECIALLY DESIGNED FOR LOADERS

MB Crusher CRUSHER BUCKET The MB-L Series crusher bucket is suitable for skid-steer loaders, wheel loaders and backhoes.

• Four models of jaw crushers that operate off of the carrier’s hydraulics.

• Easy to transport, compact, easy to use and low maintenance.

• Can be equipped with dust suppression.

• MB-L120 for skid-steer loaders from 2.80 tons and backhoes between 5 and 7 tons; MB-L140 for skid-steer loaders from 3 tons and backhoes between 6 and 8 tons; MB-L160 for skid-steer loaders from 4.5 tons and backhoes between 7 and 10 tons; MB-L200 for skid-steer loaders from 6 tons and backhoes between 7 and 10 tons.

ALLU TRANSFORMER D-SERIES SCREENER CRUSHER D-Series screener crusher buckets work with wheel loaders, excavators, skid steers and backhoes.

• Screen, crush, pulverize, aerate, blend, mix, separate, feed and load materials all in one stage – increasing efficiency and profitability.

• The unit is designed to process wet or dry materials quickly and efficiently, reducing cycle times and resulting in increased production.

• Easily handles topsoil and dirt, excavated and waste soil, demolition waste, construction waste, milled asphalt, coal, oil shale, limestone, contaminated soil, clay, peat, bark, compost, bio-waste, glass and other materials.

C

M

J

CM

MJ

CJ

CMJ

N

Send your scale data and receive your production without going to the site.

Contact RMT for your local Canadian dealer

1 800 648-8132

rmtequip.com

Remu EXTRA-STRONG SCREENING BUCKET Remu’s PD-3160 extra-strong screening bucket is designed for the hardest work in the toughest jobsites, including demanding heavy-duty applications such as pipeline construction and trench backfilling.

• For excavators that weigh 30 tons and features a maximum allowed pressure of 300 bar (4,500 psi), a maximum flow of 120-240 L/min (38-60 gal/min), a bucket volume of 2.0 to 2.3 cubic metres (2.4 to 2.8 cubic yards), and a screening area of 1.5 square metres (16.0 square feet).

• Includes rotators, cleaning scrapers and counter blades in each bucket.

• Contains a power transmission that provides continuous chain lubrication and individual direct drive for each rotor.

Rated 9 out of 10

John Deere ROCK GRAPPLE AND SCRAP GRAPPLE BUCKETS John Deere has introduced the GS66B, GS72B, GS78B, GS84B scrap grapple buckets and GR72B and GR84B rock grapple buckets.

• Two independent-action grapples.

• A 620-mm (24.4-inch) wide grapple arm and grapple stance width of 1,540 mm (60.6 inches) on the GS66 and GS72/GR72; 1660 mm (65.3 inches) on the GS78 and GS84/GR84.

• Bolt-on side plates and pre-drilled cutting edges for optional bolt-on, replaceable edges.

• Greaseable and hardened 31.8-mm (1.25-inch) pins, along with increased cylinder specifications.

• 90-degree hydraulic quick couplers.

• Cylinder guards.

APRIL 2019

>> www.heavyequipmentguide.ca 43

ANNUAL ATTACHMENTS GUIDE

DEMOLITION TOOLS Connect Work Tools CWP HYDRAULIC PULVERIZER Connect Work Tools will be adding pulverizers to their product lineup in 2019.

• Four models to choose from including non-rotating and rotating.

• Internal speed valve allows for faster cycle times.

• One-piece changeable tooth plates made of Hardox steel.

• 360-degree hydraulic rotation kit is available which allows for changing from non-rotating to rotating.

Rotar SORTING/DEMOLITION GRAB The RG sorting/demolition grab is designed for intensive sorting and recycling.

• Double-walled grab trunnion with hardened, over-dimensioned pins.

• Available in open, half-open and closed teeth versions.

• Nine models for carriers 4,000 to 120,000 pounds.

• 0.13-cubic-yard to 1.96-cubic-yard capacities.

• Closing forces from 2,697 to 25,853 ft.-lbs.

• Hardox steel wear-resistant teeth.

Breaker Technology EXC SERIES MECHANICAL CONCRETE PULVERIZER These pulverizers are designed for quiet, controlled demolition and recycling of concrete structures. The concrete pulverizer uses existing excavator hydraulics, so no additional circuits are required.

• Bolt-on replaceable teeth allow for quick change-outs in the field, reducing downtime.

• Each individual tooth is replaceable, saving on parts costs.

• Unique tooth design for outstanding penetration and fragmentation.

• Superior strength with wear-resistant steel for long life and durability.

Okada America ROTATING PULVERIZER ORC Series rotating pulverizers are designed for both primary and secondary crushing operations.

• Unique double shellshaped wedge provides exceptional crushing ability.

• Patented Okada speed valve for faster cycle times.

• Reversible 7.1-inchlong cutter blades.

• Hard facing on wear parts.

• Manufactured with Hardox 400 steel.

• 360-degree hydraulic rotation system.

• Bracket design protects components.

Genesis Attachments RAZER X MULTI-JAW DEMOLITION TOOL This tool enables excavator operators to change jaw sets in less than two minutes, without leaving the cab.

• Heavy-duty pivot design is integral to the jaw set, providing a power curve to match the jaw’s primary application.

• Reverse-mounted cylinder protects the rod from debris.

• Short, flat-top head with bolt-on bracket shortens the centre of gravity, making it easy to change mounting for different carriers.

• Available in cracker and shear jaw configurations.

AMI Attachments Inc. KRAKEN CONCRETE PULVERIZER The Kraken for excavators features a series of replaceable jaw teeth that are welded into place.

Longer teeth in the centre of the jaws concentrate pressure across fewer points on the initial crush of concrete while the secondary teeth adeptly crumble the concrete into manageable pieces.

• Serrated pinch blades are made of Hardox 400 steel and provide the grip and precision required to pick up, hold and carry fine material.

• Nose and heel, made with Bruxite 500 hard-wearing steel, give the operator fine edges for managing concrete slabs, precast structures, walls, bridge decks and asphalt.

• Three over four jaw configuration.

• The three-position bracket allows the lower jaw’s angle to adjust to three different positions.

Caterpillar MULTI-PROCESSORS These heavy-duty, high-production tools accept multiple interchangeable jaws for a variety of specialized demolition tasks.

• Speed booster technology dynamically shifts hydraulic force from speed to boost mode automatically during operation.

• Maximum crushing/cutting force is applied as soon as the jaw contacts material.

• Compact design keeps centre of gravity as close as possible to the machine for more power, even on a smaller excavator.

• Most cutting blades can be flipped in two ways, to use four different cutting edges for more production time per cutter.

NPK CONCRETE CRUSHERS For use with excavators in the 21 to 50 ton range, these attachments easily crush through reinforced concrete allowing for faster, more efficient separation of concrete and steel rebar for primary and secondary demolition.

• Abrasion-resistant, high-strength alloy steel teeth decreases wear and increases durability.

• Optional 360-degree power rotation for maximum versatility.

• NPK’s exclusive hydraulic intensifier system provides faster cycle times while requiring less flow and pressure from the carrier when compared with units using larger cylinders.

• Bolt-on replaceable tooth plate on the movable jaw.

• “A” models also utilize bolt-on tooth plate on the fixed jaw.

44

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

Shearcore CONCRETE PROCESSORS The Fortress Cracker is a primary demolition shear with the ability to do secondary demolition.

• Narrow Stick body for improved visibility.

• Removable isolated bottom cover provides exceptional access to all serviceable components.

• Unique pin retention eliminates weld-on cylinder pin keeper.

• Tight blade clearances allow rebar to be processed throughout the entire jaw length.

• Full-length side plates are machined from solid three-inch high-yield structural plate steel resulting in no weld seams.

Epiroc COMBI CUTTERS These multi-purpose hydraulic attachments are for primary demolition and secondary reduction of concrete structures, as well as for cutting steel structures.

• For carriers 33,000 pounds to 188,000 pounds (16.5 tons to 94 tons).

• Two powerful hydraulic cylinders deliver constant closing forces with short openclose cycle times.

• Low noise, low vibration.

• 360-degree endless hydraulic rotation to allow optimal positioning and precise handling.

• Replaceable and reversible cutting blades with attachments that can be equipped with different type jaws.

NPK DEMOLITION GRABS For use with excavators in the 11- to 44-ton range, these grabs’ high durability and low maintenance cost make them highly efficient for sorting and recycling C&D waste.

• High tension, special wear steel.

• 360-degree hydraulic rotation.

• They have a wide jaw opening and offer high closing force.

• Fully encased, easily accessible hydraulic components.

• Adjustable rotation speed and opening/ closing speed • Interchangeable and reversible cutters.

• Optional side covers and/or arm covers for loading activities and optional breaker plates for special demolition jobs.

FOLLOW US ON @HeavyEquipGuide

DRUM CUTTERS Antraquip DRUM CUTTERS

Epiroc DRUM CUTTERS

Antraquip transverse and axial rock drum cutters are for a range of applications in the construction, mining, tunnelling and energy industries.

They are suitable for material with uniaxial compressive strength ranging from 500 to 25,000 psi.

• Powerful high-torque hydraulic motors.

• Robust cutting drums to ensure maximum production and prolonged life.

• Customizable drums to accommodate performance maximized applications.

• Durable spur gears and housing.

Epiroc transverse drum cutter excavator attachments are ideal for rock or concrete wall and surface profiling, trenching, frozen soil excavation, soft rock excavation in quarries, as well as demolition and dredging.

• Suitable for carriers of 1,300 – 275,000 pounds (0.6 – 125 tons).

• High-torque gear motor for increased productivity and longer motor lifetime.

• Low noise and vibration levels.

• Rotate 360 degrees.

• Can work underwater to a depth of 98 feet without modifications.

• Provide optimum cutting power at low rpms.

BREAKERS & HAMMERS NPK HYDRAULIC HAMMERS

Breaker Technology MID-SIZE BX SERIES ROCKBREAKERS

A range of models are available for skid steers, backhoes and excavators of all sizes (1.2 to 120+ tons) and feature excellent power-to-weight ratio.

• Unique gas-charged piston maximizes efficiency.

• Simple, two-moving-parts design for reliability.

• Anti-blank fire feature virtually eliminates dry firing for increased life.

• Separate ports for the autolube system and an airline for underwater use.

• Replaceable cylinder sleeves for easy, economical rebuild.

• Quick-change tool system with single round retainer pin.

• Variety of tool configurations.

• Optional hammer-mounted or carrier-mounted autolube systems; optional narrower, enclosed brackets decrease operating noise; optional dust suppression for small models in enclosed brackets.

These breakers are built to handle both concrete and rock applications including breaking down concrete surfaces, trenching, or preventing blockage in crushing systems.

• With fewer parts integrated into the design, maintenance is both easy and less expensive.

• High flow rates and low operating pressures minimize heat generation and hydraulic shock loading for smooth operation and maximum service life for carrier and breaker.

• Anti-blank fire on/off selector (BX10 – BX30) allows the breaker to alternate modes.

• Rockbreaker-mounted manual stroke selector valve optimizes power and speed for different applications.

• Auto-grease system keeps tools lubricated; system installs directly on the breaker.

OKADA. ON THE JOB. DOING THE JOB. Carriers prefer demolition attachments made by Okada America, Inc. Okada’s demolition attachments expand the versatility of the excavator, mini-excavator, loader/ backhoe, skid-steer and track loader carriers.

Okada has a wide variety of attachments. Breakers.

Demolition Shears. Crushers. Pulverizers. Processors.

Grapples. Compactors. Screening Buckets. These attachments are precision-engineered, productive and dependable.

For the name of the Okada Distributor nearest you, call 1-800-270-0600. Okada. On the job. Doing the job. www.okadaamerica.com

12950 SE Highway 212 Clackamas, Oregon 97015

904 Medina Road Medina, Ohio 44256

APRIL 2019

115 Commerce Boulevard Cleburne, Texas 76033

>> www.heavyequipmentguide.ca 45

ANNUAL ATTACHMENTS GUIDE

BREAKERS & HAMMERS Allied RAMMER HAMMERS

Case HYDRAULIC HAMMERS

Rammer Series boom-mounted hydraulic hammers by Allied Construction Products reflect over 70 years of experience in high performance, high efficiency hammers known for exceptional productivity and reliability.

• Mid- and large-range models – designed for carriers from 26,500 to 176,400 pounds – feature advanced hydraulics and deliver high productivity when breaking boulders, removing slag, tunnelling, open pit mining, secondary breaking, and trenching.

• Superior design, including advanced hydraulics and an ultra-strong housing to deliver extended life and greater return on investment. Slip-fit tool bushings for easy replacement.

• Features top-down lubrication, underwater adaptation and a VIDAT System that reduces operating costs, extends operating life and minimizes downtime.

These field-tested, pre-assembled hammers are specifically made for a range of Case equipment. Hammers come in easy-to-install kits, with fully configured and pre-assembled hoses – service tools included.

• With just two moving parts, these hydraulic hammers combine innovation, efficiency and accumulator-free technology for consistent and reliable performance.

• In the cushion chamber, every blow is isolated from the carrier and operator, while energy is recycled and used for the next blow.

• The long-stroke piston is the most efficient design for energy transfer and recoil reduction, and Case hydraulic hammers come with a gas recharge kit and three-year warranty.

Hyundai HBD HYDRAULIC BREAKERS

Epiroc SB HYDRAULIC BREAKERS

The HDB hydraulic breakers from Hyundai Construction Equipment Americas, Inc., includes 15 different models to fit multiple applications and machine sizes (up to 100 tons).

• A large chisel diameter increases the strength and durability of the chisel; four chisel options available.

• For use on a Hyundai excavator, standard equipped mounting brackets match up perfectly with the Hyundai linkage. When used on other excavator brands, Hyundai dealers can fit custom mounting brackets for any machine.

• Large diameter tie bolt for high performance and optimum durability. Hoses connecting the inlet/outlet ports use a new adapter type that avoids bolt breakage and oil leakage.

• Auto-greasing feature protects moving parts from undue wear.

SB series hydraulic breaker attachments are used in demolition and renovation work, construction projects, tunnelling, dredging and pile driving. The company says these are the industry’s only breakers to come standard with an internal water port for dust suppression.

• For the 0.7- to 24-ton carrier class (1,550 to 53,000 pounds).

• Integrated overload protection valve protects against the breaker being overpressured.

• Energy recovery automatically utilizes the piston recoil energy to reduce vibration levels with the simultaneous increase of performance.

• Slim, compact design makes for easy handling and improved operator visibility.

Connect Work Tools CH SERIES HYDRAULIC BREAKERS These breakers can handle the most extreme projects in all demolition markets.

• Automatic lubricators are available for all models.

• No need for special tools: CH Series Breakers can be maintained with standard tools.

• Slip-fit tool bushings: CH bushings allow for easy maintenance and no special tools or liquid nitrogen. No need to remove the power cell from the housing in order to replace the lower bushing.

Bobcat NITROGEN BREAKERS These new nitrogen breakers deliver powerful impact energy and are built to high-quality standards with a simplified design that makes attachment maintenance easy.

• The six models have minimal internal parts, a single lower bushing and easily accessible grease ports.

• Each of these design features reduces maintenance requirements and makes rebuilds easier.

• The unique valve design of the breakers lessens hydraulic pressure fluctuation, which reduces stress on the carrying equipment’s hydraulic pumps.

Doosan HYDRAULIC BREAKERS These nitrogen-gas assisted breakers are designed for heavy-duty demolition and crushing applications and are available in impact energy classes from 2,000 to 8,000 ft.-lb.

• Energy recovery system increases strike power.

• Equipped with an upper/lower suspension system that isolates the excavator from the housing.

• Tools include moil for general-purpose breaking; blunt concrete and block breaking; chisel for concrete breaking; pyramidal/nail: concrete and hard material breaking.

46

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

MATERIAL HANDLING AMI MAT HANDLING GRAPPLE This tool places wooden mats over wet or environmentally sensitive land, giving easy access for heavy equipment to the construction site.

• Full proportional control of both the clamps and rotator means one operator can lift, tilt, spin, unload and position mats – up to five at a time – with exceptional accuracy and efficiency.

• Custom joystick delivers fingertip precision while the clamp and rotator move simultaneously in a 360-degree rotation and is available using only one auxiliary hammer circuit.

• Available for excavators, log forwarders and logging trucks as well as wheel loaders and skid steers.

Kenco BARRIER LIFT

Manitou 360-DEGREE ROTATING FORK CARRIAGE

This barrier lift can be used on any concrete median barriers, sound walls, curbing and piling and can be used for aligning barriers that have already been placed.

• Uses a lifting sling such as the Kenco RigMAX attached to any machine with lifting capabilities. No need for additional hydraulics.

• Elastomer pads provide superior performance even in wet weather.

• All models are available with optional self-aligning guides.

• Lifting capacities from 1,500 to 40,000 pounds.

The Manitou 360-degree rotating fork carriage is an ITA Class III fork carriage with continuous 360-degree rotation for easier load placement in complex positions.

• Compatible with Manitou Rotating Telehandlers: MRT 2150, 2470 and 2550 models.

• Constant load position and weight monitoring.

• Adaptive overload control according to the load’s position.

• Rated capacity is 8,800 pounds (front) and 5,500 pounds (rotated).

ALLIEDCP.COM | 800-321-1046

Weldco-Beales Mfg. FORKLIFT MASTS These forklift masts convert wheel loaders into rough-terrain forklifts for various industries.

• High-visibility two-stage masts – custom rolled twin I-beam.

• Roller or Polyslide guides that follow different tracks on inner and outer uprights.

• Outer-mounted load chains.

• Flow-restricted lowering speed.

• Spherical pin bearings.

• Sealed chain and mast guide roller bearings.

• Single-acting lift cylinders.

• ORFS hydraulic hoses and fittings.

• 15,000- to 30,000-pound lift capacities at 24-inch load centres.

Gensco GRAPPLES The RS and RSM Series handle C&D, rocks, structural scrap, demo debris, loose bundles or oddly shaped material.

• Full 360-degree rotation, dangling adaptor or flex mount 2-Pin quick attach interchangeable hydraulic coupler • Powerful, optimized and custom shapes enable any application or material.

• Optimized and protected cylinders with breaking system for thousands of cycles.

• High material quality construction with wear resistant steel.

• Easily changeable shovel or digging tips for increased productivity and less downtime.

Faced with a tough job, only the toughest tools will do. Allied’s line of Rammer® and Hy-Ram® hydraulic breakers and Ho-Pac® and Skid-Pac® compactor drivers deliver heavy-duty features and rugged functionality. Each is backed by Allied’s 77 years of impact in the industry. You get greater production, longer working life, and robust performance. Get the toughest tools with proven advantages.

APRIL 2019

>> www.heavyequipmentguide.ca 47

ANNUAL ATTACHMENTS GUIDE

MATERIAL HANDLING

COUPLERS

John Deere SEVERE-DUTY PALLET FORKS

Steelwrist TILTROTATOR

Geith QR COUPLER

The Steelwrist pairs a bucket with a factory-fitted quick coupler and tiltrotator that allows for 360-degree rotation of the attachment and 45-degree tilt from the left or right sides.

• Front pin lock technology to prevent the attachment from falling.

• Positive/negative lock indication system.

• Vertical tilt cylinders provide reach into narrow trenches.

• Fully cast steel top, gearbox and bottom.

• Attaching configurations include direct fit and S40/S50 quick couplers.

• Optional gripper can be used to pick up and move heavy objects.

Geith says that the QR coupler makes mini excavators more efficient and productive.

• Single visit manual quick-coupler.

• Unlock with one handle bar tool provided.

• Easy operation and maintenance.

• Visual and strong audible lock indicators.

• Low tip radius to maximize breakout force.

• Reversibility.

John Deere has pallet fork options for material-handling jobs of every scale with the recent introduction of its severe-duty pallet forks.

• Available in lengths of 48 and 60 inches, and can be positioned in widths from 45 inches in 5-inch increments to 60 inches in 5.35-inch increments.

• Feature a walk-through backrest with a bolt-on option and unrestricted visibility to the fork tips.

• Skid-resistant steps on both sides of the pallet fork frame also ease vehicle entrance and exit.

• Self-cleaning Quik-Tatch easy attachment system.

Engcon QUICK HITCH The Q-Safe 80 is a quick hitch for excavators up to 40 tonnes and for large, high-flow tools.

• Comes standard with an EC-Oil 70 block and two 3/4-inch connectors and connections for electrical power and central lubrication.

• Can be equipped with the new EC-Oil 80 for higher flow.

• Enables the operator to remain seated in the excavator when connecting or disconnecting the tiltrotator and other hydraulic tools.

Hultdins MG SUPERGRIP FIXED-MOUNT GRAPPLES The MG SuperGrip series of fixed-mount grapples is for excavators from 8 to 25 tonne capacity.

• Feature a bypass arm design for a variety of grapple work for land clearing, feeding chippers or grinders, storm cleanup, tree service and landscaping materials.

• Equipped with the XR Rotator, a compact low-profile design with very high torque and load capacity.

• Excavator mounts are available for direct boom mount or to match the machine coupler.

Manitou Group UNIVERSAL SKID-STEER ATTACHMENT ADAPTER

c

The universal skid-steer attachment adapter conversion plate attaches to a Gehl RS5-19 or Manitou MTA 5519 telescopic handler, allowing the operator to also utilize skid and track loader attachments.

• Commonly used with a grapple bucket, hopper broom or auger.

• Not designed for use with attachments that require high or continuous auxiliary hydraulic flow or those that place excessive weight on the machine or couplers, such as ground or pile engagement attachments.

• The weight of the attachment used with the adapter plate must be below 1,000 pounds.

onnec work tools

t

™

Geith HYDRAULIC COUPLER Geith says that its couplers are accepted worldwide as the benchmark for safety, adaptability and durability.

• Curl to Release control system guarantees attachment is only released in a safe position.

• Front safety lock forced on by a spring in case of misconnection.

• Rear safety lock provides two powerful springs in case of cylinder failure.

• Spring activated safety locks work in all dirty environments.

• No greasing requirements.

• Variable pin centre design ensures easy pick up and swapping of wide range of attachments.

• Ability to reverse buckets.

OilQuick FULLY AUTOMATIC ATTACHMENT SYSTEM Hydraulic and mechanical attachments can be changed from the comfort of the cab. It also extends the life of the attachments by ensuring the operator is using the right attachment for the job.

• One of the safest couplers on the market, exceeding all quick coupler safety guidelines set by any independent or government agency.

• Tight hose routings reducing the number of hose replacements.

• No danger of hot high-pressure oil when having to change attachments.

tough work requires tougher attachments Weldco-Beales Mfg. TRIPLE-LOCK PIN-GRABBER COUPLERS

cWP series

cc series crg series

cH series

connectworktools.com PH: 920-238-6657 info@connectworktools.com Connect Work Tools Heavy Equipment Guide April 2019.indd 1

48

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

3/8/2019 4:50:06 PM

These triple-lock pin-grabber couplers incorporate enhanced safety features for fast attachment changeout from the comfort and safety of the cab.

• Fully automated locking system – no manual intervention required to secure or release attachments.

• Provides clear visibility and reassurance when attachments are in locked position.

• Can pick up attachments in reverse (shovel configuration).

• Wear indicators read when maintenance is required.

• Triple lock features include front lock, rear lock and dead lock for a secure connection.

ANNUAL ATTACHMENTS GUIDE

SITE PREP Case LASER GRADING BOX

K-Tec TRICERABOX THREE-POINT HITCH BOX BLADE

Manitou Group EDGE HEAVY-DUTY BRUSH ROOT GRAPPLE

Ideal for concrete subgrade, athletic fields, parking lots, driveways and other fine-grading applications, the Case laser grading box for skid steers and compact track loaders creates highly precise finish grades to within 1/10th of an inch.

• Push-pull design with reversible cutting edge on all sides.

• Hydraulic valve system adjusts grading box, providing operators with smooth and accurate performance in even the toughest environments.

• Universal skid-steer mount compatible.

• Available in 72-, 84- and 96-inch configurations.

• Single- or dual-mast options.

The Tricerabox is a 14-foot-wide box blade that is mounted to the three-point hitch on the rear of a 500+ horsepower tractor for earthmoving operations.

• Three functions include the levelling blade pulling material forwards, ripper teeth sinking down into the soil, and blade backwards for pushing dozing material • Seven ground ripper shanks are hydraulically operated to lower and engage the ground for ripping up hard soil or aerating wet jobsites • Back blade allows for the operator to complete backfilling of soil work to fully smooth out the cut and fill zones.

• Three-Point Hitch may also be modified to have a scraper hitch hook-up.

The attachment features dual, independent grapple arms to handle bulky non-uniform loads such as logs, tree stumps and debris.

The design of the grapple tines allows dirt, leaves and smaller debris to fall through the grapple leaving only the bulk material within the tines.

• Cushioned cylinders and cylinder/hose guards to protect all cylinder components.

• Hardened 1-1/4 inch cylinder pivot pins.

• Backed by 100,000 psi yield strength tine material for increased durability.

• Standard load check valve for positive clamp force.

• Available in 72-, 78-, 84- and 90-inch configurations.

• Compatible with skid-steer loaders, track loaders and articulated loaders.

Prinoth STUMP GRINDER The S700 is a stump grinder for excavators from 6 to 12 tons or, with an adaptor, for skid-steer loaders up to 90 hp.

• Its 27.6-inch (700-mm) grinding wheel provides an ideal middle course in acceleration and inertia for continuous and dynamic work.

• Freewheel and pressure protection are already integrated into the motor, thus no extra drain line is required.

• The grinding disk has five tool elements and five wear resistant elements, which are mounted alternating one after another.

Seppi MULTIFORST TILLER-MULCHER The MultiForst is ideal for maintaining dirt roads, for land reclamation and to clean up slash after felling operations.

• Adjustable speed depending on the application.

• Requires 0.5 km/h creep speed and hydraulic threepoint linkage.

• Available working width: 200, 225, 250 cm (79, 89, 98 inches).

ForSite International SHARPBLADE BOX BLADE The SharpBlade is a rigid frame 2.2-m box blade leveller designed for precision grading with 75 to 90 hp carriers. It is 2D and 3D compatible.

• Rigid and robust patented QuadRod linkage.

• Sealed, shielded and lifetime lubricated hardilube bushes that never need greasing.

• Adjustable hitch plate sets SharpBlade level for precision grading.

• Graduated receiver poles set grade quickly, no measuring.

• Large twin parabolic mirrors provide clear view to blade and wing tips.

• Pivoting rear blade reduces blade packing.

• Front-mounted scarifiers scarify 50 mm deep.

Prinoth MULCHER The M450e-900 is a lightweight mulcher for 6- to 12-ton excavators.

The installed gear motor allows simplified mount-

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

The Bad Ax disc mulcher for skid steers is a high-powered forestry head for a wide range of applications, including land clearing, vegetation control, fire prevention and more.

• Includes a fully machined, 60-inch-diameter disc designed to cut trees up to 14 inches in diameter.

• Recutter bars along with counter teeth hold material in place while it is being mulched.

• Housing design has parallel sides that provide enhanced control over funnel, or V-shaped, disc mulchers; front of housing is angled, allowing the teeth to mulch at ground level; rigid discharge deflector and angled recutter bar offers more control of material discharge than hinged deflectors.

• Ultra-sharp, heat-treated steel Quadco blades that can be sharpened or rotated on site.

• Requires 70 to 120 hydraulic horsepower to operate.

ForSite International SCAPERAKE POWER RAKE ing on various excavators as well as rapid changing of carrier units.

• No installation of additional drain lines necessary.

• Weighs 992 pounds and is optimized for easy handling.

• With the adapter plate, the mulcher can be mounted on every position of the excavator arm.

• Counter blades prevent large objects infiltrating and stalling the rotor, which is 35.4 inches (900 mm) long.

• Also available with a working width of 43.3 inches (1,100 mm) for excavators 12 to 18 tons.

50

Loftness BAD AX DISC MULCHER

This heavy-duty power rake with simultaneous angle and tilt is designed for the toughest environments and is available from 1.5 m (60 inches) to 2.2 m (86 inches).

• Twin direct-drive hydraulic motors – no chains to wear and break.

• 152-mm (6-inch) drum processes material quicker than larger drums.

• 20 degree angle plus 12 degrees tilt either direction; angle and tilt forward or reverse on the go.

• Internal protected bearing, largest in class.

• Removable, easily adjustable stone guards; removable, reversible side wings.

• Tungsten-tipped teeth.

• Adjustable hitch plate for perfect height.

• Retracting wheels, mounted independent of drum.

• Sealed and lifetime lubricated with no greasing required.

COMPACTORS

MISCELLANEOUS

Connect Work Tools CC SERIES COMPACTORS

Indeco North America IHC SERIES COMPACTORS

Minnich MACHINE-MOUNTED DOWEL PIN DRILLS

CC Series mounted compactors are designed for heavy-duty applications. They are built to deliver maximum vibratory force for use in compacting or driving wood fence posts, guardrail posts, rail and I-beams, piling and seawalls, and compacting waste.

• Offering five models to fit skid loaders, backhoes and excavators which reduce manpower requirements and provide work safety compared to hand-held tamper operation.

• Plug and play installation with wear-resistant hoses and oil splash bearings that provide maintenance-free lubrication.

• All CC compactors are equipped with high-performance hydraulic motors capable of operating at 2,000 rpm.

The IHC Series of hydraulically driven, boom-mounted compactors features five models with centrifugal forces from 2,418 to 33,354 pounds. They fit a range of carriers from 3,800 to 100,000 pounds.

• Oil-bath lubrication of eccentric bearings to ensure long term protection against wear.

• Hydraulically-driven eccentric weight systems reduce air voids and move more material faster.

• Thick steel baseplate prevents flexing or distortion.

• Heavy-duty shock absorbers between the carrier coupling plate and vibration motor housing isolate vibrating forces from the carrier and the operator.

The A3/A6 machine-mounted drills maximize productivity and safety on patchwork jobs while offering maneuverability to get jobs done faster.

• Pneumatically powered units that can be mounted to an excavator, backhoe or skid-steer loader to form a self-contained and highly mobile drilling solution for full-depth repair.

• Provide a safer alternative for operators, eliminating fatigue by using the carrier to transport the drill.

• Available side-shift functionality enables operators to drill a second set of holes without having to reposition the carrier.

• Optional dust collection system available.

John Deere PLATE COMPACTORS John Deere’s three new plate compactors are designed for trench, slope and excavation compaction applications. The PC4, PC7 and PC10 models deliver powerful performance and productivity.

• Large eccentric rotating weight.

• Weight mass is further away from the shaft to provide increased impulse forces up to 8,000 pounds (3,628 kg) and improved compaction rates when working with compact granular soils.

• Inset motor designed to protect machine from damage.

• 2,000-rpm frequency at regulated flow.

NPK PLATE COMPACTORS

Kubota TRIP EDGE BLADE

For backhoes or excavators from 2.5 to 70 tons, NPK compactors work anywhere the carrier’s boom can reach: trenches, the top of piling, around obstructions, even on steep slopes or rough terrain where rollers and other machines are unable to work safely.

• Frame is welded, unitized structure that endures forces exerted by the carrier.

• Durable rubber mounts, solid welds and self-aligning roller bearings that never need greasing.

• Steel logic valve equipped with anti-reversal check valve and pressure relief, anti-cavitation, and flow control valves.

• Optional swivel top minimizes carrier repositioning (can be secured parallel or perpendicular to boom).

• Optional bolt-on single or dual backfill blades to push soil, gravel and debris without repositioning.

The TE35 is a snow tool for contractors, landscapers, municipalities and more. It moves heavy snow in a single pass and, with its trip-edge design, eliminates damage to surfaces, ensuring the machine can last.

• Available in 96- and 108-inch widths.

• Seven-gauge mouldboard.

• Heavy-duty tension spring.

• Radius blade.

• 22-degree angle right and left.

FOLLOW US @HeavyEquipGuide

VISIT US ONLINE heavyequipmentguide.ca

Allied COMPACTOR/DRIVER The Model 4000 compactor is able to compact in four-to-sixfoot lifts, to densities exceeding 95 percent proctor with a 42- x 45-inch baseplate.

• Drives wood and steel – beams, posts, pipe, sea walls and piling.

• Larger eccentric with mass further away from shaft centreline helps to increase impulse and compaction force.

• New hose routing for better protection; tough coat hoses.

• Four-function valve controls flow, pressure, regeneration and oil flow direction.

• Custom-sized base plates available.

APRIL 2019

>> www.heavyequipmentguide.ca 51

MAKE YOUR OPERATIONS

BETTER. FASTER. SAFER.

JOIN YOUR PEERS AT

ICUEE 2019!

North Americaâ&#x20AC;&#x2122;s Largest Utility & Construction Trade Show 1,000+ Leading Manufacturers & Service Providers More than 28 Acres of New Products 18,000+ Construction & Utility Professionals

Utility professionals worldwide use ICUEE to make informed purchasing decisions that position their businesses & teams for success.

October 1-3, 2019, Louisville, KY

|

Learn More at www.icuee.com

ANNUAL ATTACHMENTS GUIDE

MISCELLANEOUS

EST. 1945

Simex WHEEL SAW

Kubota COLD PLANER

The T 300 wheel saw is part of a range that includes eight models.

It offers full protection of the wheel at any working depth and the hydraulic piston motors in direct drive with the milling disk deliver maximum hydraulic performance and a high cutting force.

• Excavates at widths of 30, 50 or 80 mm and at a depth of 300 mm.

• Offered with hydraulic tilt that allows the wheel saw to be maintained constantly and perfectly perpendicular to the ground, even when the carrier is not parallel with the road surface, and also with a conveyor belt to avoid the waste material from remaining on the ground.

• Available conveyor belt option moves waste material into the bucket of another compact loader moving backwards in front of the T 300.

The CP30 cold planer is ideal for milling asphalt, cutting utility trenches, and for pothole and shoulder repairs.

• Independent RH/LH skid shoe control.

• Hydraulic tilt, depth and sideshift.

• Optional water system.

• Three-line setup (pressure, return and case drain).

• Removable carbide cutting teeth use rocket fin technology that is built into the teeth for longer life.

Manitou Group EDGE PICK UP HOPPER BROOM This attachment makes cleaning up debris after milling and road maintenance or general jobsite cleanup more efficient with the ability to sweep in both forward and reverse.

• Available in three widths: 60, 72 and 84 inches.

• Reduce dust and flying debris with an optional dust control kit.

• Sweep along curbs and in hard to reach areas by adding a gutter brush; the brush increases the cleaning width by 12 inches.

• Optional waterless dust abatement system.

• Compatible with skid loaders, track loaders and articulated loaders.

Weldco-Beales Mfg. TIRE HANDLERS These tire handlers/ manipulators are designed to safely and efficiently handle large tires found on big equipment.

• Grip pads firmly keep hold of the tire and/or rim.

• In-cab proportional controls allow the operator to handle tires while in the comfort and safety of the cab.

• Integral mounts allow maximum operator visibility and machine performance.

• Hydraulically operated fall arrest arms protect the technician in case of a falling tire.

• Models available for forklift trucks, telehandlers and wheel loaders.

Rototilt ATTACHMENTS FOR USE WITH TILTROTATORS

DUST CONTROLLER GAS, DIESEL & ELECTRIC MODELS

GET CONTROL (716) 592-2700 • BuffaloTurbine.com Made in the USA

Institute of Scrap Recycling Industries, Inc.

Rototilt offers multiuse bypass style grapples, sorting style grapples, and compactors that can all be operated with tiltrotators on the standard Rototilt auxiliary circuit.

• Multi-use grapples can be used for a wide range of materials and are popular for land clearing, rail applications and a wide variety of material handling.

• Sorting grapples are ideal for light demolition, conventional material sorting applications and stone work.

• The Rototilt compactor is ideal for compacting uneven surfaces, slopes, around pipes or other obstacles, and in tight areas.

Kubota HOPPER BROOM The hopper broom is a cleanup tool for contractors and rental yards. It comes with a large, tapered, heavy-duty collection bucket that offers multiple brush configurations – adaptable to what needs cleaning up.

• Available in 74- and 84-inch widths.

• The heavy-duty bucket offers a 3/16-inch shell and is tapered front to back to help hold in material.

• 26-inch brushes in poly, wire or combination poly and wire bristle options.

• Optional gutter broom and dust suppression kit.

APRIL 2019

>> www.heavyequipmentguide.ca 53

INDUSTRY NEWS | heavyequipmentguide.ca

IN BRIEF

Remote-controlled wheel loaders to be tested when Volvo CE receives Sweden’s first 5G network for industry AUTOMATION Telia, Ericsson and Volvo Construction Equipment have launched Sweden’s first 5G network for industrial use at Volvo CE’s facility in Eskilstuna. Volvo CE will then become one of the first in the world to use 5G technology to test remote-controlled machines and autonomous solutions.

The 5G network will be used at Volvo CE’s research and development facility at Eskilstuna to further develop solutions for remote control of construction machinery and fully automated solutions. It will also be used to increase understanding of how connected machines can create added value for the customer.

“Automation has several levels and having 5G is an important technical support to enable us to drive development in this area. These trials in Eskilstuna will include the remote control of a conventional wheel loader but also further tests of the HX2 concept load carrier,” says Melker Jernberg, president, Volvo CE. “We can see that the industry’s interest in 5G is considerable. Automation of the entire flow will mean new ways of working and greater gains from efficiency. But to connect business-critical machines and vehicles requires a solution that is able to handle the massive amounts of data with guaranteed connection. That is what 5G can give us. And we are proud to lead the 5G development in Sweden together with our partners,” says Anders Olsson, CEO of Telia Sweden.

Doosan Infracore North America opens new 57,000-square-foot parts distribution centre near Seattle

Even with fully automated systems, human intervention is still needed now and again for control. Today’s remote-control technology has a time lag that makes it difficult to control at high speed or with high precision. 5G will make remote control simpler and safer.

“With extremely short response times, high capacity, and a high level of accessibility to the mobile network, commercial and standardized 5G technology can be used for applications such as remote control of heavy machinery in real time. This opens up new opportunities for greater efficiency, cutting costs and reducing risk in hazardous environments. 5G enables us to create a safer, more efficient and sustainable society. In cooperation with Telia and Volvo CE, we are now putting theory into practice in Eskilstuna. The 5G technology is ready for the world to switch on,” says Magnus Frodigh, head of research at Ericsson.

Thousands visit National Heavy Equipment Show in Mississauga TRADE SHOW Big crowds of heavy equipment professionals filled the halls of Mississauga’s International Centre for the 2019 edition of the National Heavy Equipment Show, which took place March 28-29. This year’s edition welcomed 12,668 buyers, holding steady with past events. With large-scale projects planned across the country for roadbuilding, infrastructure, and more, key decision makers and purchasers came out in full force to this year’s show.

“The National Heavy Equipment Show remains one of the biggest events bringing the industry together in Canada,” said Mark Cusack, National Show manager. “It was a pleasure to welcome even more companies to the show floor this year. This growth allowed us to highlight more sectors, such as the expanded Gravel Pit showing huge equipment. On behalf of show management, we’re thankful for everyone who joined us. We’re already looking forward to 2021.”

Show attendees included a mix of industry professionals including leaders in the construction, roadbuilding, land improvement, and infrastructure industries – along with job seekers, students and those training for specific trades.

Special features included the Ontario Asphalt Pavement Council (OAPC) Spring Operations Seminar, as well as many other exciting components including the Recruiting Here feature, and a variety of informative seminars on topics ranging from virtual reality to drones.

Skyjack forms exclusive partnership with Atlantic rental company MacFarlands PARTNERSHIP Skyjack has formed a contract with MacFarlands Industrial for their new Moncton, New Brunswick location.

MacFarlands has been renting throughout Atlantic Canada for over 50 years. Skyjack will be the sole supplier of all DC electric scissor lifts to MacFarlands.

“We’ve serviced Atlantic Provinces from our Nova Scotia location since 1963 and have been thinking about expanding for quite some time,” said Scott Bishop, operations manager at MacFarlands Industrial. “With our second location, we’ll be able to keep up with demand coming from our customers operating out of New Brunswick.”

In late 2018, Doosan opened a new 100,000-square-foot parts distribution center in the Atlanta area. A second Doosan parts distribution centre in Lacey, Washington, became operational April 1, 2019. The Doosan parts distribution centre in Lacey is approximately 57,000 square feet. Doosan dealers and customers in the Western United States and Canada will benefit from the new facility, with better service options, deeper inventory and faster parts delivery.

Terex Trucks aims to expand dealer network in North America The company wants to expand its already 35-strong North American dealer network, bringing its TA300 and TA400 machines to even more customers throughout the region.

According to Dodge Data & Analytics, U.S. construction projects started this year will carry a combined value of $808 billion.

Also, at the moment, companies taking on energy projects are doing particularly well because major renovation work is underway in and around B.C. “Historically, North America has always been a strong market for us,” said Robert Franklin, sales and marketing director, Americas. “A significant proportion of the machines we make at our Motherwell facility are distributed to customers across this region. As a company, we want to grow our business in North America, reaching new customers and working with our dealer network to deliver an even better service.”

CES is new rental equipment distributor for BOMAG in Ontario and Newfoundland & Labrador BOMAG has announced that Construction Equipment Solutions (CES) is a new rental equipment industry distributor for the provinces of Ontario and Newfoundland & Labrador. As a new BOMAG rental distributor, CES will offer independent and national rental outlets sales and parts support for BOMAG’s extensive line of rental compaction equipment from its Pickering, Ontario, headquarters.

ADVERTISER INDEX

54

Allied Construction Products, LLC................ 47

ICUEE 2019..................................................52

Procore..........................................................4

Antraquip Corporation....................................46

John Deere..................................................33

RMT Equipment..........................................43

Buffalo Turbine................................................53

Kal Tire.........................................................11

Rototilt Inc...................................................25

CIM 2019 Convention & EXPO........................ 41

KOBELCO Construction Machinery............ 5

Stellar Industries.........................................35

CONEXPO-CON/AGG.....................................49

Komatsu.......................................................26

Terrafirma Equipment Sales & Rentals......17

Connect Work Tools........................................48

Liebherr..........................................................9

The Gear Centre..........................................44

Doosan.............................................................21

Link-Belt Excavators...................................37

Trail King Industries, Inc.............................39

Eberspächer....................................................53

Mack Trucks..................................................6

Wacker Neuson Corporation......................29

Frontline Machinery........................................ 15

Metso Minerals............................................55

Wajax...........................................................27

Genie................................................................ 31

National Leasing.........................................43

Weldco-Beales Manufacturing..................50

GOMACO Corporation....................................56

NLMK.......................................................... 38

Western Star Trucks Sales, Inc. .......... 22,23

GRYB/Bateman............................................... 51

Okada America............................................45

Wirtgen America....................................... 2-3

HEAVY EQUIPMENT GUIDE

>> APRIL 2019

Crush and go Metso NW Rapid™ portable solution

Gain a competitive edge in your aggregate production process by sourcing material directly on site.

Ideal for infrastructure or other large volume projects, the Metso NW Rapid™ portable solution is easy to set up, transport, and the most dependable choice for over 1,000 high-precision installations worldwide.

It doesn’t get more dependable than “crush and go.” See the Metso NW Rapid™ portable solution in action at metso.com/nwrapid. #nwrapid #crushandgo

Join us at CIM 2019 Palais des Congrès Montreal, QC April 28 - 30, 2019 Booth #2203

Zero Turn for Mobility, A Fun New Spin for Pavers

info@gomaco.com ❘ www.gomaco.com Long, straight runs are nice. But many of you have curb and gutter projects with short runs, radii and corners in parking lots or tight locations.

GOMACO’s Xtreme curb and gutter machines have zero-turn capabilities for maneuverability. You’ll be able to place more curb than ever before and move your machine in ways you have never moved before. You’ll be able to pour a tight radius that you could only dream of before. GOMACO’s proprietary G+ controls makes your concrete paver smoother and easier to operate. So, if you want a Zero-Turn GOMACO Paver for your next paving season, you better call now. Our worldwide distributor network and our corporate team always stand ready to serve and assist you.

CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ 712-364-3347