Mechanical Fasteners
MOD-EEZ FASTENERS PROVIDE STRONG, FAST ASSEMBLY WITHOUT TOOLS
952-241
The Mod-eez® system uses a spring steel declining ramp "clip" and a large collared "shoulder screw" as the two mating members. Spring steel clips make the joints strong yet flexible. Sliding the shoulder screw head down the clip assembles the system. Dimensional changes in the joined material will not rupture or loosen joints. The fasteners holding the joint are totally concealed. Available in bags of 100 or in kits. Use our #8 x 1-1/4" round washer head screw (931-261) for clips mounted to the edge of sheet stock. For shallow installations, use #8 x 5/8" or #8 x 3/4" truss head screws (946-133 or 946-140).
951-968 951-975 951-989
Semi locking clip 2-1/4" x 1/2" x 3/8" Non locking clip 2-1/4" x 1/2" x 3/8" #12 shoulder screw x 5/8" for 3/4" panels
952-227 952-234 952-241 952-248
Semi locking clips w/shoulder screws (bag of 25) Non locking clips w/shoulder screws (bag of 25) Double 32mm clips w/shoulder screws (bag of 12) Semi locking clips and non locking clips w/shoulder screws (25 of each clip & 50 screws) Pass Thru Clips w/shoulder screws (Bag of 25 each)
173-066
952-227
952-234
Pkg. of 100 $37.29 $40.19 $28.89 Bag $17.99 $16.89 $13.39 $32.69
173-066 4+ pk. $33.89 $36.29 $26.39 4+ pk. $16.59 $15.49 $12.39 $29.59
$17.19
$15.69
Semi-Locking Clip
HEX DRIVE THREADED INSERT NUTS Hex Drive Styles with knife threads Type “D” • Positive gripping, 6mm hex drive. • Flanged head controls depth and aligns the nut. • Good for blind, end, or edge grain applications. Type “E” • 6mm hex drive without the flange. • Can be driven below the surface for completely flush applications. 812-452 812-459 812-466 812-473 122-846 812-487 812-438
D
Knock-in Styles with barbed sides Type “A” • Coarse teeth for firm hold. • Knock in to pilot hole.
E
Internal Thread x Length Type Pilot Hole 8-32x10mm type D Zinc insert D 7/32" - 15/64" 1/4-20x10mm type D Zinc insert D 21/64" - 23/64" 1/4-20x13mm type D Zinc insert D 11/32" - 23/64" 1/4-20x20mm type D Zinc insert D 11/32" - 23/64" 1/4-20x25mm type D Zinc insert D 11/32" - 23/64" 1/4-20x13mm type E Zinc insert E 11/32" - 23/64" 1/4-20x13mm type A Zinc insert A 11/32" - 23/64"
Pkg. 10 $5.99 $5.69 $5.99 $8.79 $9.09 $5.89 $7.99
5+ pk. 10+ pk. 25+ pk. $5.59 $5.29 $5.09 $5.29 $4.99 $4.79 $5.59 $5.29 $5.09 $8.19 $7.79 $7.49 $8.39 $7.99 $7.69 $5.49 $5.19 $4.99 $6.99 $7.39 $6.69
A
937-206
866-497
937-213
866-511
TWO-PIECE KD FITTING NEARLY INVISIBLE WHEN INSTALLED Zinc alloy cam fits into a 15mm dia. x 12.5mm deep hole and accommodates all three dowels. Center of side hole for dowels should be 8mm from the top surface. Use with material 5/8" or thicker. C dimension (distance to the center of the cam) is the same as the dowel length. Thread length is 12mm and is in addition to dowel length.
INTERLOCKING FLUSH MOUNTS MAKE IT EASY TO HANG PICTURES, MIRRORS, EVEN CABINETS
• Standard size is made of tough, .062 gauge steel, yet they are only 1/8" thick installed. • Mini flush-mount is made of .095 gauge steel. • Screws included for both. 937-206 937-213
Standard flush mounts Mini flush mounts
Set $7.69 $4.59
5+ st. $7.09 $4.29
10+ st. $6.69 $4.09
866-497 15mm x 12.5mm cam
Pkg. of 10 $10.19
A dia. B dia. 866-504 34mm dowel w/9mm thread 5mm 7mm $10.19 866-511 24mm dowel w/8.5mm thread 5mm 6mm $12.19 Each 128-993 4mm hex wrench $1.89
See Pages 80 & 81 for Shipping/Payment Information & Order Form
woodworker.com
5+ pk. 10+ pk. $9.49 $8.99 $9.49 $11.29
$8.99 $10.79
133 1 - 8 0 0 - 6 4 5 - 9 2 9 2
