Drilling Accessories Large handle for easy turning
903-713
SELF-CENTERING DOWL-IT® JIGS
Quick and accurate. Handle stock up to 2" thick. Hardened steel guides for 1/4", 5/16", 3/8", 7/16" and 1/2" drills. 120-001 Improved Dowl-it® has 7/16", 1/2" single guide holes and 2 threaded insert guild holes 1-1/4? on center with 2/ea 1/4?, 5/16" & 3/8? bushings. Drill two holes with 1 setting and get consistent spacing between holes. Extra 1/4", 2000-N and 5/16", 2000-P bushing sleeves available. USA.
903-706
SELF-CENTERING DOWEL JIGS
• Anodized aluminum bodies with hardened steel guides. 903-706 and 940-344 have 1/4", 5/16", 3/8", 7/16", and 1/2" permanent holes. • 903-713 has two tapped holes for supplied bushings to let you drill 3 sizes of holes on 3/4" centers in one setting (1/4", 5/16", 3/8") plus 7/16" and 1/2" permanent holes. • 940-344 handles materials from 3/8" to 6" thick. • Extra wide viewing hole and distinctive marks make it easy to line up for perfect results. • Use a spacer block on one side to drill holes offset from center if needed. • 903-706 and 903-713 accept up to 2-5/16" wide stock. • USA. 903-706 940-344 903-713 920-296 920-303 920-310
Self-centering dowel jig 6" self-centering dowel jig Self-center dowel jig w/bushings 3 pack 1/4" replacement bushings 3 pack 5/16" replacement bushings 3 pack 3/8" replacement bushings
120-001 120-002
Dowl-it® Improved Dowl-it®
$75.99 $89.39
Edge-to-edge doweling
$68.99 $87.99 $79.99 $12.89 $12.89 $12.89
Miter-joint doweling
HARDENED STEEL DRILL BUSHINGS IN ELEVEN SIZES ADD DURABILITY AND PRECISION TO SHOP-BUILT JIGS Make your own custom drilling fixtures using these durable, hardened steel drill bushings: Hardened to RC 50. Special knurled surface lets them hold in wood fixtures. Install with a soft mallet. Chamfered edges protect drill bits. USA. 821-862 821-869 821-876 821-883 821-890 821-897 821-904 821-911 821-918 842-898 821-925
ID x OD x Length. 1/8" x 3/8" x 1/2" 3/16" x 3/8" x 1/2" 1/4" x 1/2" x 1/2" 5/16" x 1/2" x 1/2" 3/8" x 3/4" x 5/8" 7/16" x 3/4" x 5/8" 1/2" x 3/4" x 5/8" 5mm x 3/8" x 1/2" 7mm x 1/2" x 1/2" 8mm x 1/2" x 1/2" 9mm x 3/4" x 5/8"
Each $6.19 $6.89 $7.99 $7.99 $7.99 $7.99 $14.99 $6.99 $6.99 $9.99 $9.99
10+ $5.49 $6.19 $7.09 $7.39 $7.29 $7.29 $13.59 $6.29 $6.29 $8.89 $8.89
50+ $5.19 $5.79 $6.89 $7.09 $7.09 $6.99 $13.09 $5.99 $5.99 $8.49 $8.49
DOWEL CENTERS
Ten 1/4" dowel centers Ten 5/16" dowel centers Ten 3/8" dowel centers Ten 1/2" dowel centers All 40 centers
MULTI-USE DOWELING JIG
Easy to assemble and use, the Multi-Use Doweling Jig Kit will help you accurately drill edge-to-edge and edge-to-side holes plus - best of all - miter joint dowel holes: Durable metal body and frame. Two each of 1/4", 3/8", 6mm, 8mm and 10mm hardened steel bushings. Removable center plate allows jig to be used as a vise. Comes with "E" clamp, assembly hardware and instructions. Approx. 21/8"H x 5-3/8"W x 7"L (closed); weighs 2.7 lbs. Available 'B' block has a pair each of 5/16", 7/16", and 1/2" guide holes. Imported. 126-143
Multi-dowel jig
$64.19
WOODTEK® DRILL BIT EXTENDER QUICKLY ADDS 3-3/4" TO YOUR 3/8" SHANK DRILL BIT
Functional dowel center are nickel plated steel with sharp points for precise dowel hole center marking in hard or soft wood: • Available as sets of 10 of each size or a combined set of 40. Imported. 116-251 116-244 116-236 116-228 116-269
Edge-to-side doweling
$5.19 $6.19 $7.69 $8.29 $22.99
Your 3/8" dia. shank drill bit fastens into bit extender using four hex screws (included). Just tighten the bit extender shank into your 3/8" or larger drill chuck and begin drilling. All steel - 5" O.A.L. with 5/8" outside diameter. Imported. 71-514
See Pages 80 & 81 for Shipping/Payment Information & Order Form
Bit Extender
woodworker.com
$6.19
71 1 - 8 0 0 - 6 4 5 - 9 2 9 2
