TGS 6x6 Chassis TGS 6x6 Chassis M Cab
Evolve to MAN
TGS 6x6 Chassis
Wheels and Tyres Fitted with 315/80 R22.5 tyres on 9.00 x 22.5 10 hole steel disc wheels. Spare wheel carrier mounted on left side of chassis. Basic wheel changing equipment supplied.
Fuel Tank 400L steel fuel tank with guard plate on right + 35L Adblue tank on left, with lockable caps. Option of 600L aluminium tank +35L Adblue.
Engines
Intake / Exhaust System
PTO
MAN 6-cylinder 4-valve in-line engine, with Common Rail injection, turbocharging and intercooling. EDC electronic engine regulation.
Raised air intake with pre-filter mounted on the L/H side of the cab with air filter housing under rear of cabin.
Crankshaft driven (live-drive) power take-off on the flywheel side of the engine at 12 o’clock position. Ratio = 1.233, rated up to 870Nm continuous operation. Complete with dual-flange elastic coupling damper.
EURO 5 emission standard with OBD2 (onboard diagnosis) and NOx-control. SCR catalytic converter with Adblue injection. MAN Engine Valve Brake (EVB) fitted as standard.
Exhuast mounted on R/H side of chassis with vertical discharge.
Transmission
Front Axle / Suspension
MAN 12 speed TipMatic (ZF AStronic) gearbox. 12 forward speeds, 2 reverse ratios. Suitable for gross train weights up to 90T. Automated constant-mesh gearbox.
MAN hub reduction VP-09 (9,000kg) driven front axle. Drive to front axle (dis)engageable.
With MAN TipMatic, shifting and clutching are electro-pneumatic there is no clutch pedal. Normal mode is automated with manual mode available (shifting via fingertip lever). ‘M’ setting for precise low-speed manoevering in forward & reverse. ‘X’ setting for off- road use.
Transfer Case G252 two-speed transfer case with (dis)engageable drive to front axle.
ENGINE SPECIFICATIONS
Differential lock with warning buzzer. 8,000kg parabolic springs with stabiliser & shock absorbers.
Rear Axles / Suspension MAN Hub-reduction HPD 1382 / HP 1352 tandem axle with slide shackle multi-leaf springs, stabilisers & shock absorbers. Fitted with inter axle & cross axle differential locks. Standard diff ratio of 4.00, optional diff ratios available: 3.25 / 3.63 / 4.33 / 4.83. Suspension design rating 2 x 13,000kg.
TRANSMISSION SPECIFICATIONS
Engine HP
Model
Power Rating
Torque
Model
Transmission Ratios
Std. Differential Ratios
440 HP
MAN D20 10.518 Ltrs
324kW @ 1600 - 1900rpm
2100Nm @ 1000 - 1400 rpm
ZF 12 AS 2330 OD
12.33 - 0.78
4.00
Frame
Cab Interior
High-build design ladder frame made from QstE500TM high strength steel. Frame Dimensions 270mm x 85mm x 9.5mm. 3 piece steel bumper fitted.
High comfort ISRI driver’s seat with air suspension, integrated seat belt and arm rests. Factory fitted climate control system.
Front Under Run Protection System (FUPS) not fitted to this model due to off road vehicle classification.
Brake System MAN Electronic Brake System (EBS) with ABS standard. Drum brakes fitted to all axles. Full air operated system fitted with air dryer. Hand operated trailer brake. MAN ‘Easy-start’ function holds service brakes on hills for smoother pulling away. Off-road ABS switch for improved braking performance when off road.
Double DIN sized MAN Topline stereo system with 5.2” touchscreen, AM / FM tuner, CD player, USB & auxiliary inputs, Bluetooth, control functions integrated with the multi function steering wheel. 6-speaker sound system. Electrically operated power windows. Central storage box between the seats, large storage drawer in the dash console, modular cup holder and glasses storage compartment. Silver dashboard trim strip.
Electrical System
Lights
24V Electrical system with manual battery isolation switch. 80 Amp alternator, 2 x 155Ah batteries.
Headlights fitted with longlife H7 type globes. Lighting system operation check.
Optional electrical preparation for reverse camera connection, and optional integrated navigation available.
KSM module fitted for communication of required body/ chassis function.
Speed Limiter
Instrument Panel
Paintwork
Vehicle electronically limited to 100kmh. Driver programmable speed limit function can operate between 40kmh and 100kmh.
Full electronic Base Line dash display with easy access to vehicle information systems. Permanent guages: tachometer, speedometer, odometer, air pressure guages, coolant temperature, fuel guage, indicator operation, gear selection.
Cab finished in Traffic White (RAL 9016). Chassis finished in Graphite Black (RAL 9011).
Clutch Single plate 430mm diameter clutch - asbestos free.
Sample electronic display: time, outside temperature, turbo boost, trip meter, brake wear, oil level, fuel consumption, battery voltage, etc.
Cab Options M Cab (day) 2240mm wide, 1880mm long.
Warning lights for all major functions such as: diff lock status, low air pressure, low fuel, lights, cab lock, etc.
Cab Exterior Cab compliant with ECE R29 safety requirements. All metal parts are Galvanised. 65 degree cab tilt angle, 87 degree door opening. Exterior sunvisor. Entry lighting for driver and passenger. Central locking for both doors. Electrically adjustable and heated rear view and kerb-view mirrors. Manual front-view mirror. Lockable front access panel. Electrically operated cab tilting mechanisim. Mechanical roof hatch. Coil sprung cab mounts front and rear. Chrome trim to front grille. Stone guard grille in front of radiator.
Steering Multifunction steering wheel adjustable for rake and reach. Steering wheel controls for cruise control, programmable speed limiter, electronic dashboard menu displays, plus controls for the stereo system and Bluetooth phone system.
Steel bumper and lower plastics finished in grey.
Protective grille for headlights.
Specification Data
GVM: 33,000kg
M CAB
M CAB WEIGHTS
GCM: 90,000kg
TURNING CIRCLE
Wheelbase
Front (kg)
Rear (kg)
Total (kg)
Kerb to Kerb (m)
3600mm
5360
4830
10190
18.5
20.0
4500mm
5415
4985
10400
20.4
21.9
M CAB CHASSIS DIMENSIONS (mm)
EMPTY
LOADED
EMPTY
Wall to Wall (m)
LOADED
Wheelbase
FOH
ROH
OAL
CA
CF
AE
BL
H1
H2
H3
H4
W1
W2
3600mm
1492
1500
7992
2950
5850
650
6880
3344
3279
1170
1100
2490
2240
4500mm
1492
2500
9892
3850
7750
650
7670
3344
3279
1170
1100
2490
2240
1. All above weights and dimensions are subject to confirmation and may vary depending on final specification. Manufacturing weight tolerance +/- 3%. 2. State and Federal regulations over ride information supplied on this brochure. 3. Vehicle images in this specification sheet are for illustration purposes only. 4. Maximum body length is calculated using a rear overhang of 60% of the wheelbase to a maximum of 3.7m. 5. Tare weight includes 400 litres of fuel, 75kg driver, spare wheel and steel wheels. 6. Specifications are subject to change without notice. Copyright © 2014, MAN Automotive Imports Pty Ltd.
MAN Automotive Imports Pty Ltd 72 Formation Street, Wacol, QLD 4076 • PO Box 301, Goodna QLD 4300 T: (07) 3271 7777 • F: (07) 3271 2047 www.man.com.au