MAN 8x8 Specsheet

Page 1

TGS 8x8 Chassis TGS 8x8 Chassis M Cab

Evolve to MAN


TGS 8x8 Chassis Engines

Intake / Exhaust System

Transfer Case

MAN 6-cylinder 4-valve in-line engine, with Common Rail injection, turbocharging and intercooling. EDC electronic engine regulation.

Raised air intake with pre-filter mounted on the L/H side of the cab with air filter housing under rear of cabin.

G252 two speed transfer case with permanent drive to front and rear axles.

High mounted muffler behind the cab on right, with vertical discharge.

Fuel Tank

EURO 5 emission standard with OBD2 (onboard diagnosis) and NOx-control. SCR catalytic converter with Adblue injection. MAN Engine Valve Brake (EVB) fitted as standard.

Transmission MAN 12 speed TipMatic (ZF AStronic) gearbox. 12 forward speeds, 2 reverse ratios. Suitable for gross train weights up to 90T. Automated constant mesh gearbox. With MAN TipMatic, shifting and clutching are electropneumatic - there is no clutch pedal. Normal mode is automated with manual mode available (shifting via fingertip lever). Driving with engaged PTO only in gears 2 or 4. ‘M’ setting for precise low-speed manoevering in forward & reverse. ‘X’ setting for offroad use.

Wheels and Tyres Fitted with 315/80 R22.5 tyres on 9.00 x 22.5 10 hole steel disc wheels. Spare wheel supplied loose and mounted temporarily on frame. Basic wheel changing equipment supplied.

ENGINE SPECIFICATIONS

400L aluminium fuel tank with guard plate on right + 35L Adblue tank on left between steer axles, with lockable caps. Option of 600L aluminium tank +35L Adblue tank.

Front Axles / Suspension MAN hub reduction VP/VPD-09 2 x 9,000kg permanently driven front axles. Load sharing 2 x 8,000kg parabolic springs with stabiliser and shock absorbers. Differential lock in 1st and 2nd axle plus inter-axle lock.

Rear Axles / Suspension MAN Hub reduction HPD 1382 / HP 1352 tandem axle with slideshackle multi leaf springs and stabilisers. Fitted with differential locks and interaxle lock. Optional differential ratios available: 3.25, 3.63, 4.33, 4.83. Suspension design rating: 2 x 13,000kgs.

TRANSMISSION SPECIFICATIONS

Engine HP

Model

Power Rating

Torque

Model

Transmission Ratios

Std. Differential Ratios

480 HP

MAN D26 12.418 Ltrs

353kW @ 1900rpm

2300Nm @ 1050 - 1400 rpm

ZF 12 AS 2330 OD

12.33 - 0.78

4.00


Frame

Cab Interior

High build design ladder frame made from QstE500TM high strength steel.

High comfort ISRI driver’s seat with air suspension, integrated seat belt and arm rests. Factory fitted climate control system.

Frame Dimensions 270mm x 85mm x 9.5mm. 3 piece steel bumper fitted. Front Under Run Protection System (FUPS) not fitted to this model due to off road vehicle classification.

Brake System MAN ‘Easy-start’ function holds service brakes on hills for smoother pulling away. Off-road ABS switch for improved braking performance when off road. Drum brakes fitted to all axles. Full air operated system fitted with air dryer. Hand operated trailer brake.

Clutch

Double DIN sized MAN Topline stereo system with 5.2” touchscreen, AM / FM tuner, CD player, USB & auxiliary inputs, Bluetooth, control functions integrated with the multi function steering wheel. 6-speaker sound system. Electrically operated power windows. Central storage box between the seats, large storage drawer in the dash console, modular cup holder and glasses storage compartment. Silver dashboard trim strip. Reading lamps for driver and codriver. 2 windows in rear cab wall. Optional electrical preparation for reverse camera connection, and optional integrated navigation available.

Electrical System

Lights

24V Electrical system with manual battery isolation switch. 80 Amp alternator, 2 x 155Ah batteries.

Headlights fitted with longlife H7 type globes. Lighting system operation check.

KSM module fitted for communication of required body/ chassis function.

Single plate 430mm diameter clutch - asbestos free.

Paintwork

Speed Limiter Vehicle electronically limited to 100kmh. Driver programmable speed limit function can operate between 40kmh and 100kmh.

Instrument Panel Full electronic Base Line dash display with easy access to vehicle information systems. Permanent guages: tachometer, speedometer, odometer, air pressure guages, coolant temperature, fuel guage, indicator operation, gear selection.

Cab Options M Cab (day) 2240mm wide, 1880mm long.

Cab Exterior Cab compliant with ECE R29 safety requirements. All metal parts are Galvanised. 65 degree cab tilt angle, 87 degree door opening. Exterior sunvisor. Entry lighting for driver and passenger. Central locking for bothdoors. Electrically adjustable and heated rear view and kerb-view mirrors. Manual front-view mirror. Lockable front access panel. Electrically operated cab tilting mechanisim. Mechanical roof hatch. Coil sprung cab mounts front and rear. Chrome trim to front grille. Stone guard grille in front of radiator.

Sample electronic display: time, outside temperature, trip meter, brake wear, oil level, fuel consumption, battery voltage, etc. Warning lights for all major functions such as: diff lock status, low air pressure, low fuel, lights, cab lock, air suspension, etc.

Steering Multifunction steering wheel adjustable for rake and reach. Steering wheel controls for cruise control, programmable speed limiter, electronic dashboard menu displays, plus controls for the stereo system and Bluetooth phone system.

Cab finished in Traffic White (RAL9016). Chassis finished in Graphite Black (RAL 9011). Steel bumper and lower plastics finished in grey.

Protective grille for headlights.


Specification Data

GVM: 42,000kg

M CAB

M CAB WEIGHTS

TURNING CIRCLE

Wheelbase

Front (kg)

Rear (kg)

Total (kg)

Kerb to Kerb (m)

Wall to Wall (m)

4030mm

7765

4250

12015

25

27.4

EMPTY

LOADED

EMPTY

LOADED

Wheelbase

FOH

ROH

LX CAB CHASSIS DIMENSIONS (mm) OAL

CA

CF

AE

BL

H1

H2

H3

H4

W1

W2

4030mm

1492

800

9517

4850

7050

975

9250

3370

3294

1180

1100

2490

2240

1. All above weights and dimensions are subject to confirmation and may vary depending on final specification. Manufacturing weight tolerance +/- 3%. 2. State and Federal regulations over ride information supplied on this brochure. 3. Vehicle images in this specification sheet are for illustration purposes only. 4. Maximum body length is calculated using a rear overhang of 60% of the wheelbase to a maximum of 3.7m. 5. Tare weight includes 400 litres of fuel, 75kg driver, spare wheel and steel wheels. 6. Specifications are subject to change without notice. Copyright © 2014, MAN Automotive Imports Pty Ltd.

MAN Automotive Imports Pty Ltd 72 Formation Street, Wacol, QLD 4076 • PO Box 301, Goodna QLD 4300 T: (07) 3271 7777 • F: (07) 3271 2047 www.man.com.au


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.