tgx-tgs euro 5 engines:Layout 1
12/3/10
9:13 AM
Page 1
TGX / TGS Euro 5 Engines
Euro 5 emission engines are now available from MAN for all Heavy Duty TGX & TGS trucks. The TGX & TGS range feature the MAN D20 and D26 engines with outputs from 360hp to 540hp (265kW to 397kW). All of the engines use the tried and tested SCR technology with exhaust gas treatment to meet the new Euro 5 / ADR 80/03 emission regulations. Electronically controlled Common Rail fuel injection ensures consistent and efficient injection of finely atomised fuel at pressures of up to 1800 bar at precisely defined intervals within the compression and power strokes. The fuel mixture burns cleanly and efficiently, and the engine runs quieter. The MAN high pressure fuel system is gear driven from the crankshaft which allows very high fuel pressures to be generated even on idle. Maximum fuel pressure is generated at very low revs resulting in a more responsive engine. The MAN Common Rail system design includes an accumulator which holds reserves of fuel for the rail and allows multiple injections per stroke giving improved torque delivery. Optimal engine tuning for Euro 5 emissions allows the engine to produce very low particulates during combustion.
The nitrogen oxides (NOx) produced mix with a urea solution (AdBlue速) which is injected into the exhaust gases. This gaseous mixture passes through the catalyst exhaust system where the ammonia and nitrogen oxides react to form water vapour and nitrogen gas. The Euro 5 catalyst exhaust muffler is the same dimensions as the Euro 4 version, so no compromise on the available chassis space.
tgx-tgs euro 5 engines:Layout 1
12/3/10
9:13 AM
Page 2
Engine Model D20
Emission Standard
10.5L 6-cylinder
360Hp / 265kW
1328 lb-ft / 1800Nm
400Hp / 294kW
1401 lb-ft / 1900Nm
440Hp / 324kW
1550 lb-ft / 2100Nm
D26
Euro 5
EEV
✓ ✓ ✓
✓ ✓ ✓
✓ ✓
✓ ✗
12.4L 6-cylinder
480Hp / 353kW
1696 lb-ft / 2300Nm
540Hp / 397kW
1844 lb-ft / 2500Nm
Both D20 & D26 engines have similar characteristics, producing full torque from low revs with power curves usually seen in much larger engines.
D20 Engines (KW) 360 340 440 hp 320 400hp 300 360 hp 280 260 240 220
(Nm)
200
2220 2100 Nm
180
2100 2000
160 1900 Nm
1900
1800 Nm
1800 1700 1600 1500 1400 1300 1200
800
1000
1200
1400
1600
1800
2000
2200
(1/min)
Up to 480Hp, the engines are also available in the more stringent EEV (Enhanced Environmentally-friendly Vehicle) emission standard which reduces the particulate emissions by a further 33% compared with Euro 5. This allows operators the choice to demonstrate a higher degree of environmental responsibility.
D26 Engines (KW) 540 hp
400 380 360
480 hp 340 320 300 280 260 (Nm)
240 220
2600
2500 Nm
2500
200
2400
2300 Nm
2300 2200 2100 2000 1900 1800 1700 1600
800
1000
1200
1400
1600
1800
2000
2200
(1/min)
Specifications are subject to change without notice. Copyright c 2010 MAN Automotive Imports Pty Ltd.
MAN Automotive Imports Pty Ltd 72 Formation Street, Wacol, Qld 4076 • PO Box 301, Goodna, QLD 4300 Telephone: 07 3271 7777 • Facsimile: 07 3271 2720 • www.man.com.au