21-22 CFR Bro Sure

Page 1

Bro e r u S W22

NEW BARS

WHAT THE BROS RIDE:

PEHOTA, SUHAN, SIEG, TURCOTTE, MESSNER, RASMAN

NEW GRIPS NEW LINK IT UP 2.0 RACK

ZAC OH

Photo: Zac Oh Location: Clearwater, BC Rider: Brett Turcotte

Handle bars cheetahfactoryracing.com Risers

PHOTO GALLERY Grips

1

Racks

Wearables

@cheetah_snow accessories


IGNITION

Photo: Anatole Tuzlak Location: Whistler, BC Rider: Logan Pehota

@cheetah_snow

2

cheetahfactoryracing.com


I get up And nothing gets me down You got it tough I’ve seen the toughest all around And I know Baby, just how you feel You’ve got to roll With the punches to get to what’s real Oh can’t you see me standing here I’ve got my back against the record machine I ain’t the worst that you’ve seen Oh can’t you see what I mean? Might as well JUMP. -David Lee Roth

HANDLEBARS ACCESSORIES

cheetahfactoryracing.com

5 16

RACKS

22

BAGS

30

3

SPARE PARTS WEARABLES

@cheetah_snow

31 35


HANDLEBARS HANDLEBARS

RILEY

SUHAN @rsuhan

141466’n ’n

146’n is bitch’n. Straight-up full-pin powder mix’n. You wanna go fast? You better start fix’n, to chop that tunnel and throttle on a mission. Fun has replaced what you’re no longer missin’. Long tracks are just for diss’n.

Photo: @TGFG_ Rider: @Calebkesterke Photo: TGFG Location: Revelstoke Location: Golden, BC B.C. Rider: Riley Suhan

@cheetah_snow

4

cheetahfactoryracing.com


HANDLEBARS

The Boondocker 2.0 is our most popular bar for a reason; it’s got the perfect combination of comfort and control. Things happen when snowmobiling and by using 7075 aircraft aluminum, the Boondocker strength is twice that of stock bars and provides an even better feel of what going on. The bar features a 2” quick rise, extending from an oversized, 1 1/8” midsection, which leads to a natural 14° sweep for your arms and wrists. The control response is lively yet damp and the 30” wide Boondocker 2.0 bar has the width necessary for all your controls. The 10° degree forward hook is there for added support in moments of maximum extension and is the extra bit you need during technical tandem riding. It is important to note the Boondocker is an oversized 1 1/8” in the center. A 7/8” to 1 1/8” adapter or a different riser that accepts oversized handlebars might be needed depending on the snowmobile riser you have.

Baby Blue CD3.8

Hot Pink

Ghost White

Fluro Orange

Green

Purple

Raw

Flat Black

Blood Red

CD12

CD3.5

CD3.7

CD3.9

CD3.4

CD3.3

CD1.5

CD3.6

Gun Metal Grey CD3.15

30”

2” HOOK 10°

14°

1 1/8”

Riding Style: Trail, Trees, Mountain, Catching Air Strength: Flex: LOW

MED

HIGH

USE WITH

cheetahfactoryracing.com

5

@cheetah_snow


HANDLEBARS The Turcotte bar gives you instant access to the cockpit of one of the most progressive riders on the planet. This oversized bar is built with a single focus on progression leading performances. When you’re flying through the sky with a 500lb machine above your head and you’re only hanging on to a set of bars, you had better believe you want those bars to work properly. The Turcotte bars have a 30” width and 12º sweep with a 1” rise coming from an oversized 1 1/8” midsection. This is a strong bar that is not meant to flex and is the choice handlebar for Brett and his aggressive riding style.

“This is definitely the best all around set up I’ve ever found. It’s a fairly flat feeling bar, with only 2.25” of total rise (bar+riser). It’s very nimble in the trees and pretty great overall.”

BRETT

TURCOTTE @Turcotte16

30” 1”

1 1/8”

12°

Riding Style: Trail, Trees, Mountain, Catching Air Strength: Flex: LOW

MED

HIGH

Photo: Dalby Location: Whistler

@cheetah_snow

6

cheetahfactoryracing.com


Set Up

Turcotte Bar

Black Bar Pad

1.25” Riser

Purple grips

TGFG

Flat Black

Powder White

Blood Red

CD13.7

CD13.8

CD13.6

Gold

Purple Haze

Raw

CD13.9

CD13.11

CD13.10

TGFG

CFR bars and risers mounted on a Specialty Motorsports Post Forward Steering Kit.

cheetahfactoryracing.com

7

@cheetah_snow


HANDLEBARS

The Crowbar is a non-oversized, 7/8” diameter snowmobile handlebar, which means no different riser or adapter is needed to run these on your stock setup. The 7075 aircraft aluminum helps to keep them straight when things go sideways. The Crowbar bend works for hill climbing, boondocking, ditch banging, water crossing, and most any other situations you get into when snowmobiling.

Black CD15

Banana Yellow

Orange Crush

White

Raw

CD15.2

CD15.3

CD15.1

CD15.4

30” 1” HOOK 10°

14°

Riding Style: Trail, Trees, Mountain, Catching Air Strength: Flex:

7/8”

LOW

MED

HIGH

The Rooster 2.0 is a re-vamped version of our original straight bar. This bar suits a smaller rider that doesn’t want more height in their stance. Hill climbers are fond of this bar as is anyone with a narrow shoulder width. The clamp width is 1 1/8” and will require an oversized adapter to fit stock risers.

0”

28” 12°

Hot Pink

Flat Black

CD301v

CD300

1 1/8”

White CD302

Riding Style: Trail, Trees, Mountain, Catching Air Strength: Flex: LOW

MED

HIGH

Leyland

@cheetah_snow

8

cheetahfactoryracing.com


HANDLEBARS

Chris Brown is one of the best all-around snowmobilers in the business. We are beyond stoked to work with Chris to develop this Polaris specific handlebar. No adapter needed, you can throw these 7/8” bars on your stock Polaris clamp! Along with its bombproof 7075 aircraft aluminum, the 28.5” width, 6º bend, 11º pullback, and 5” rise make the Chris Brown Signature Bar super smooth and comfortable to use.

Flat Black

White CD40.1

CD40

Blood Red CD40.2

28.5”

5”

Riding Style: Trail, Trees, Mountain, Catching Air Strength: Flex:

7/8”

LOW

11°

MED

HIGH

NEW! The CFR 29ER bar is the newest bar in our 7/8” diameter line up. With an overall width of 29” and a 12 degree pullback the 29ER bar will help you easily navigate through tricky tight terrain. The 29ER is manufactured with SDG (Smaller Diameter Grip) which tapers the grip area by 2mm for a rider who prefers a smaller grip on their handlebar. The 29ER bar will work with most stock risers with no different risers or oversized adapter needed. We use the same 7075 aircraft aluminum as in all of our other handlebars, creating a very strong, great feeling snowmobile handlebar.

Products Specs: • • • • • • • • • •

Flat Black

7/8” diameter at the clamp (Works on most stock risers) SDG (Smaller diameter grip area) 1” rise 7° upward bend 12° pull back 40° downward bend J-hooks 29” width QR technology Made from 7075 heat-treated super aluminum with flex technology. Strong, lightweight and built to last.

CD500

Riding style: Trail, Trees, Mountain, Catching Air Strength: Flex: LOW

cheetahfactoryracing.com

9

MED

@cheetah_snow

HIGH


HANDLEBARS

Andrew had been cutting down his Boondockers to a 29” width and asked if we could make him a custom bar so he didn’t have to cut his bar down. We went to the drawing board and designed the all new Munster Bar. We wanted everyone riding all different brands to be able to use this handlebar so we dropped the height to 1” which allows the clamping space to be wide enough to work with all brands and still gives enough room on the handlebars for all of your controls. A great all around riding handlebar with less width for a more responsive powerful feeling in tight situations. The narrow width allows the snowmobile to be thrown around easier for riders with a narrower shoulder width or riders who prefer a narrower handlebar.

Hot Pink

Flat Black

Raw

CD99.2

CD99

CD99.1

29” 1”

HOOK

10°

14°

White CD99.3

1 1/8”

Riding Style: Trail, Trees, Mountain, Catching Air Strength: Flex: LOW

MED

HIGH

Kesterke

@cheetah_snow

10

cheetahfactoryracing.com


HANDLEBARS

NEW! We are beyond excited to introduce the new Caleb Kesterke Signature bar. Caleb’s dedication and passion continues to push the sport of snowmobiling and his new bar is a reflection of that passion, with no detail overlooked in the pursuit of progression. Caleb’s aggressive riding style required the strongest bar possible so we started by making it oversized 1 1/8” out of 7075 aerospace-grade aluminum. The width of a handlebar determines the stability and agility; too wide will feel slow and sluggish and too narrow will be unstable and sketchy. The 29” width Caleb chose gives the best combination of both quickness and stability. The hand-to-handlebar connection is one of the most important and overlooked things when snowmobiling. The thinner the grip area, the better the connection and control. Using thin gloves and no hand warmers is one way to allow for a small diameter grip area but cold hands can ruin your day. The Kesterke Signature bars have SDG (smaller diameter grip) which tapers the grip area by 2mm so grip heaters and grips can still be used while retaining a thinner grip feel. The 1” rise of the CK handlebar gives you just the right amount of flex in the bar and allows all of your controls to fit. Slap on one of the best graphics packages in the lineup and boom, there ya go!

29” 1”

12°

Flat Black

Teal

CD400

CD405

Riding style: Trail, Trees, Mountain, Catching Air Strength: Flex:

1 1/8”

LOW

MED

“CFR handlebars have been my go-to for a while now. It made sense that we should team up and put out a bar that is specifically catered to my kind of riding. I’m really stoked how they turned out and can’t wait to see where they take me.” Issac Kesterke

Caleb Kesterke

@calebkesterke Products Specs: • • • • • • • • • •

Oversized 1 1/8” SDG (Smaller diameter grip area) 1” rise 7° upward bend 12° pull back 40° downward bend J-hooks 29” width QR technology Made from 7075 heat-treated super aluminum with flex technology. Strong, lightweight and built to last.

Kyle Saxton

cheetahfactoryracing.com

11

@cheetah_snow

HIGH


HANDLEBARS

The SX Bar is CFR’s first snowbike specific handlebar. Made from 7075 heat treated super aluminum with flex technology. Strong, light weight and built to last! Better positioning than stock bars and way stronger! The new design dissipates bumpy conditions better than stock bars while keeping you fresh and riding longer! Vertical and horizontal positioning graphics for perfect centering and pull back angulation. Custom graphics in five color ways. Flat Black, Banana Yellow, Orange Crush, or Blue Bird. The SX bar is an oversized 1 1/8” in the center. A 7/8” to 1 1/8” adapter might be needed depending on the snowbike riser you have.

Black

Banana Yellow

Blue Bird

Raw

CD13.7

CD13.6

CD13.11

CD13.11

30”

3”

Riding Style: Trail, Trees, Mountain, Catching Air Strength: Flex:

1 1/8”

LOW

MED

HIGH

14°

@cheetah_snow

12

cheetahfactoryracing.com


HANDLEBARS

REAGAN

SIEG @rsieg317

Photos: TGFG Location: Golden, BC

cheetahfactoryracing.com

13

@cheetah_snow


REAGAN

SIEG

Photos: TGFG Location: Vernon, BC

@cheetah_snow

14

cheetahfactoryracing.com


Welcome to the dirt! The HE is CFR’s first foray in to off road control. We’ve been spending our summers on two wheels for a while now and we thought it was time to bring the quality of an oversized bar that we’ve been enjoying on snow to the dirt world. The HE bar comes in 3 rises and 4 colorways to accommodate everyone with 8° upward and 12° backward sweep on all models.

cheetahfactoryracing.com

Austrian Orange

Blood Red

Ghost White

Gun Metal Grey

CD15.3

CD301v

CD15.1

CD13.7

15

Photo: Dave B Location: Bridge River Valley Rider: Chris Ankeny

@cheetah_snow


Shane Roy

Narrow Bar Pad Our Narrow Bar Pad is a low profile offering that fits between a mountain strap, especially on a new Doo. The pad is made of high density foam and is wrapped with a tough Cordura top with a rubber logo. Velcro on the bottom latches the pad to the bar.

Blacked Out

Blue

Green

Orange

CD31.8

CD31.4

CD31.6

CD31.5

Pink

Purple

Red

White

CD31.2

CD31.7

CD31.3

CD31.1

Bar Pad The CFR bar pads are designed to fit all CFR handlebars or any oversized large diameter handlebars. The dual density foam will protect against sharp corners and hardware on riser. The Cordura material with CFR logos is long lasting and can withstand cold temps and all of the abuse that comes with snowmobiling.

Baby Blue

Ghost White

Monster Green Part No. CD30

Part No. CD30.4

Blood Red

Blacked Out

Part No. CD30.2

Hot Pink Part No. CD30.8

Part No. CD30.1

Purple

Part No. CD30.3

Orange

Polaris Pad Part No. CD30.7

Part No. CD30.5 @cheetah_snow

Part No. CD30.6 16

cheetahfactoryracing.com


HANDLEBAR ACCESSORIES

GRIPS

Signature Grip We are stoked to add a whole rainbow of new colorways to the Signature Grip line for winter 2022! The new signature grip graphics are designed to provide superior grip with no snow or ice build-up. The graphics not only look good but provide comfort and grip so your hands stay right where you want them. The Signature Grip fits all handlebars, including small diameter bars like our new Kesterke Signature and 29er. Features: • Functional graphics for maximum grip performance. • Compatible with hand warmers. • Fits over straight end or handlebars that have pre bent hooks. • 5 7/8”/ 149mm - Length • 13/16” / 20mm - Inside diameter • Sold per pair • Flat Black

Signature Grips

BLACK PURPLE BLUE RED ORANGE YELLOW GREEN WHITE HOT PINK

NEW!

Grips CFR snowmobile grips are injection molded with super tacky rubber. The ultra thin diameter rubber compound will fit over your handlebar heater elements and give you optimum handlebar feel and response. Features: • Standard grips are 6 3/4” long. • Nice diamond grip surface. • Compatible with hand warmers. • Fits over tapered and steel handlebar hooks. • Sold per pair.

GRIPS (6 3/4”) BLACK RED ORANGE YELLOW GREEN GHOST WHITE HOT PINK PURPLE BLUE

CD20 CD21 CD22 CD23 CD24 CD26 CD27 CD 20.2 CD 20.5

cheetahfactoryracing.com

Polaris GRIPS (5 1/8”)BLACK

CD20.1

17

@cheetah_snow

CD200 CD201 CD202 CD203 CD204 CD205 CD206 CD 207 CD 208


HANDLEBAR ACCESSORIES Black

Knucks Risers 1.25” RISER 2” RISER

2.5” RISER 3” RISER

3.5” RISER

BLACK- CD60 BLUE- CD60.1 GOLD- CD60.2 PURPLE-CD60.3

BLACK-CD29 BLACK-CD29.4 BLUE- CD29.5 GOLD-CD29.1 PURPLE-CD29.2 RED - CD29.3

BLACK-CD28 BLACK-CD28.1 BLUE-CD28.5 GOLD-CD28.6 PURPLE CD28.7 RED CD28.8

4” RISER

5” RISER

6” RISER

7” RISER

BLACK- CD07 BLUE- CD07.5 GOLD- CD07.1 PURPLE-CD07.2 RED-CD07.3

BLACK- CD08 BLUE- CD08.5 GOLD- CD08.1 PURPLE-CD08.2 RED-CD08.3

BLACK- CD09 BLUE- CD09.5 GOLD- CD09.1 PURPLE-CD09.2 RED-CD09.3

BLACK- CD10 BLUE- CD10.5 GOLD- CD10.1 PURPLE-CD10.2

Purple

Gold

8” RISER BLACK- CD11 BLUE- CD11.5 GOLD- CD11.1 PURPLE-CD11.2

Blue Red

- CNC machined from high strength 6061 - T06 aluminum. - Graphics are laser etched for a durable long lasting look. - Anodized black, blue, gold and purple finish. - Will work with either 1-1/8” tapered bar or 7/8” bar (adapter included). - Patent pending 7/8” anti slip insert keeps bars where you want them. - Designed specifically to be used with our entire handlebar line up and all stock and other after market handlebars.

Handlebar Heaters OEM HB Heaters

Generic HB Heaters

SKI DOO XM CURVED ENDS PP- CD18.7 SKI DOO GEN 4 CURVED ENDS PP- CD18.6 POLARIS 850 CURVED ENDS PP- CD18.8 POLARIS 850 SQUARE ENDS PP- CD18.85 POLARIS 800 CURVED ENDS PP- CD18.9 POLARIS 800 SQUARE ENDS PP- CD18.95

GENERIC-CURVED ENDS- CD18 GENERIC-SQUARE ENDS- CD18.5

Oversize Bar Adapter Allows 7/8” risers to accommodate oversize 1 1/8” handlebars. You’ll want a set of these if you are buying any of our oversized 1 1/8” handlebars and wanting to use your stock risers.

Gold CD17.1

Flat Black CD17 @cheetah_snow

18

Blue CD17.5

Purple CD17.2 cheetahfactoryracing.com


HANDLEBAR ACCESSORIES

Bar Nuts

Mountain Strap Bendable

Part No. CD50

CFR Bar Nuts allow you to mount your Ski-Doo grab strap to any handlebar. Two forged aluminum brackets connect to your handlebar for a solid connection, without slippage. (The strap is not included).

The CFR Bendable Mountain Strap works great to get out of sticky situations and for tandem snowmobiling. The soft compound allows for a greater mobility of strap. New pre-bent mounting brackets, with stainless hardware, wraps securely on the handlebar to prevent slippage.

Part No. CD16

Mountain Strap Adapter The CFR Mountain strap adapter allows you to attach your Ski Doo Mountain strap (2017 - Current) directly to the top clamps of your Knucks Risers for more of a stock look. ** Mountain Strap is not included **

Part No. CD50.1

Polaris Mountain Strap The Fabcraft Polaris Mountain Strap is designed to be attached to the Chris Brown Handlebar. The Mountain Strap is made from an extremely elastic compound with threaded bolts built into the ends. All hardware is included to attach to the crossbar of the Chris Brown Handlebar.

Part No. CD16.1

Rigid Mountain Strap The CFR Rigid Mountain Strap is made for sledders wanting a solid grabbing point on their snowmobile handlebars. The rigid strap fastens to most handlebars using the CFR bar nuts. The bar nut mount fastens to the bars tightly not allowing slippage.

New and Improved Rigid Mountain Strap The New CFR Rigid Mountain strap is the perfect tool for tricky maneuvers, Getting your sled unstuck and tandem (Double up snowmobiling). The low-profile bar clasps easily and installs in tight areas using minimal precious bar space.

NEW!

Part No. CD16.5

cheetahfactoryracing.com

Part No. CD16.75

19

@cheetah_snow


ANDY

MESSNER @andymessnersnow

Set Up Turcotte 2.0 Bar

5” Riser

Signature Grips

QP Bag

Foam Trucker Hat

Photo: Dave Craig Location: Whister, BC

@cheetah_snow

20

cheetahfactoryracing.com


HANDLEBAR ACCESSORIES Tube Adapter

5-1/2” tube converts stock flat style steering post to a pivot style steering post when using a pivoting style handlebar riser. • Super strong chromoly steel. • Attaches to stock handlebar clamps or any 7/8” handlebar attachment. • Positions pivoting style risers on outside of stock handlebar clamps.

Part No. CD19

Arctic Cat Adjustable Post Delete Kit This kit allows you to use your stock steering post and removes the height adjustable feature off your Arctic Cat snowmobile. Simply cut below the adjustable part of your steering post and install the new T style billet block (step by step directions included). You will also need to get a riser (height of your choice). Eliminates 90% of the slop found in the stock adjustable post and saves over 1lb, depending on the height of risers you choose.

Part No. CD25

NEW!

Polaris Bar Mount Cap The CFR Polaris bar mount cap replaces the stock handlebar clamp for a better fitting/looking bar clamp. A stock Polaris bar clamp will not clear our 1.25” Knucks risers, but the new CFR bar mount cap eliminates this issue, allowing for the lowest possible cockpit setup on a Polaris snowmobile.

Part No. CD19.75

NEW!

Polaris T Post The CFR Polaris T-Post adapter bolts on your factory Polaris flat post. Made from 6065 Aluminum and CNC’d to perfection. Using the CFR Polaris T-Post adapter allows you to install our knucks risers directly to your T-Post for a solid connection with fewer parts.

Part No. CD19.5

The Cluster Relocate - Ski Doo Gen4— Part No. CD28 - Ski Doo XM— Part No. CD28.1 - Knucks Riser— Part No. CD28.3 CD28

Clean up your handlebar controls and move them out of the way with this easily installed relocator.

CD28.3

cheetahfactoryracing.com

CD28.3

CD28

CD28.1

21

@cheetah_snow


Photos: Phil Tifo Location: Whistler, BC Rider: Chris Rasman


TUNNEL RACKS

LINK IT UP 2.0 RACK

NEW!

The New CFR Link It Up Rack 2.0 is the next generation of removable on-the-fly snowmobile rack systems. The new bolted together design allows the rack to be easily assembled and can be configured for different carrying capacities. The new Link it up Rack 2.0 comes in 3 different sizes. Small, Large and XL. Small Rack 2 mounting points (one on each side of the tunnel.) 14 1/8” Long x 16 5/8” Wide Large Rack 4 mounting points (two on each side of the tunnel.) 20 15/16” Long x 16 5/8” Wide

Small Rack TR 08.0

XL Rack 4 mounting points (two on each side of the tunnel.) Designed to carry extra large loads. 26 7/8” Long x 16 5/8” Wide Large Rack TR 08.5

XL Rack TR 08.75

**Each Link it Up 2.0 Rack requires 2-4 Linq Cargo Base Kits (TR7.1) and Fasteners (TR7.2) to mount to your sled, sold separately. **Ski-Doo LinQ Fasteners are not included.

NEW!

LINK IT UP 2.0 RACK BRACKETS The New CFR Link It Up Rack 2.0 uses the new Link It Up 2.0 Brackets for ski and snowboard carrying. These new brackets allow for vertical adjustments so that the edges of your board or skis won’t rest on your running boards. The Link It Up 2.0 brackets are ski/board compatible so there is no need to choose which system you might want, it automatically works for both ski and snowboards.

Link It Up 2.0 Ski/Board Brackets K06

Large Rack with skis configuration

Small Rack with a board -Bindings on the inside is optional.

cheetahfactoryracing.com

Large Rack with a board

Large Rack with skis. -New specific poles storage on bracket.

23

Large Rack with snowboard configuration

@cheetah_snow


TEAM RIDER

CHRIS

RASMAN

Nick Name: Razzy Local Base: Whistler, BC Age: 32 W21 Highlights: Competed in all 3 Natural Selection tour stops. Won the Canadian round. Look for Chris in the new King Snow movie and a fun one with Apres Lager.

Set Up

Favorite

Turcotte Bar

Signature Grips

Balaclava

2” Riser

Narrow Mountain Rack

Snow Scraper

QP Bag

Photos: Phil Tifo Location: Whistler, BC

@cheetah_snow

24

cheetahfactoryracing.com


TUNNEL RACKS

LINK IT UP RACK

- Flat Black Part No. TRO7 -Ghost White Part No. TRO7.5 The CFR Link It Up Rack allows you to attach and remove your snowmobile rack quickly and easily using the Ski Doo LinQ Fasteners. All CFR brackets kits and bags are compatible with the Link It Up Rack. *Each Link it Up Rack requires 4 Linq Cargo Base Kits (TR7.1) and Fasteners(TR7.2), to mount to your sled, sold separately.* *Ski-Doo LinQ Fasteners are not included.

LinQ Cargo Base Kit Part No. TR7.1

These 4 Cargo Base Kits are designed to be installed using the 8 factory holes on the rear tunnel of Ski-Doo snowmobiles (all hardware included). When used with the Linq fasteners it allows tool-less installation or removal of the Link-It-Up Rack. *Ski-Doo LinQ fasteners are not included.* Includes: • 4 Ski-Doo Cargo Base Kits. • All hardware to attach Cargo Base Kits to snowmobile tunnel.

LinQ Fastener Part No. TR7.2

These 4 Ski-Doo LinQ cargo fasteners are designed to be attached to the CFR Link-It-Up Rack (all hardware included). When installed and used with the LinQ Cargo Base Kit, it allows tool-less installation or removal of the Link-It-Up Rack. Includes: • 4 Ski-Doo Cargo LinQ Fasteners. • All hardware to attach fasteners to the CFR Link-It-Up rack.

Mountain Rack Narrow - Flat Black Part No. TR04.75 The new CFR Mountain Rack-NRW is designed specifically for Polaris and ArcticCat snowmobiles. The 16” width and pre-drilled holes in the mounting plate fit the T-slots on the back of most Polaris snowmobiles. All of our bracket kits and both Dime and QP bag also fit inside the new rack. We are constantly working on making our product line better and better. The Mountain rack is as cutting edge as it gets. The overall height of the Mountain rack is 3 3/4”. Dropping the center of mass lowers all of the weight that’s carried in the rack allowing the snowmobile to perform better under load. The CFR Mountain Racks design allows the rack to be mounted on the edge of the tunnel. This will allow OEM factory holes to be used requiring less drilling into the rear tunnel. The design is also engineered to use fewer materials than existing racks yet still be as strong. Features: -Designed by CFR’s super team of snowmobilers, skiers, and snowboarders. -Total rack height is only 3 3/4” high. -Carries up to a 20L or 6 gallon jerry can. -Carries up to two pairs of skies and or two snowboards with proper attachments. -All mounting hardware is made from high grade stainless steel. -Compatible with CFR Dime and QP bags

cheetahfactoryracing.com

25

Dimensions: - 16” Width - 13 1/2” Length - 3 3/4” High

@cheetah_snow


TUNNEL RACKS

Mountain Rack - Flat Black - Ghost White - Orange Crush - Monster Green

Part No. TRO4 Part No. TRO4.1 Part No. TRO4.3 Part No. TRO4.2

The CFR Mountain Rack lets you carry extra gear/gas on the back of your snowmobile. The lightweight, low profile design of the Mountain Rack is very strong and built to last. Snowboards, powsurfers, and ski brackets can still be used on each side of the rack.

The CFR Connect System does not work with the Mountain Rack.

Expedition Rack - Flat Black Part No. TRO5

The CFR Expedition Rack is ready for most anything. You can carry twice the amount of gear on those big days or overnight trips. Snowboards, powsurfers, and ski brackets can still be mounted on each side of the rack as well. (Requires a 153” tunnel or longer). The CFR QP bag and dime bag also fit great in the Expedition rack.

Photo Anatole Location: Wh Rider: Logan P

iRack 2.0

- Flat Black Part No. TRO6 - Ghost White Part No. TRO6.5 The iRack 2.0 is the hybrid rack of the Mountain and iRack. Its bigger carrying capacity allows you to carry more gear as well as any two Bracket Kits (sold separately). The Bracket mounting holes are farther apart on this rack, securing skis and snowboards better than ever. The iRack 2.0’s lower profile keeps skis and or snowboards lower and closer to the snowmobile. The lightweight, yet strong design is almost bombproof.

Blades

Add a little more metal to the rear tunnel of your snowmobile. The CFR XP/XM/ Gen 4 Blades are designed to be fastened to the outside or inside rear tunnel of your Ski-Doo snowmobile. Blades add 50% more strength to the rear tunnel. The XP/XM/Gen 4 Blades are recommended if you travel on bumpy roads carrying lots of extra weight on the rear tunnel of your snowmobile. Blades also available for Arctic Cat M series 2005-2008 and Yamaha Nytros as well. Features: -Anatomically designed to fit the rear tunnel -Blades all come in anodized black. -Comes with 1 right/1 left side and stainless steel rivets. -Made in Canada. @cheetah_snow

SKI DOO REV GEN 4

-165 ..........................Part no. TS08 -154 ......................... Part no. TS08.5 -175 ..........................Part no. TS08.6

26

Anodized Black Skidoo XP, XM -146............................................. Part no. TS01 -154............................................. Part no. TS02 -163............................................. Part no. TS03 -174.............................................. Part no. TS07 Yamaha Nytro.......................... Part no. TS04 Arctic Cat M-Series............ Part no. TS06

cheetahfactoryracing.com


Set Up Munster Bar

LOGAN

PEHOTA @loganpehota

Polaris T-post

3” Riser

Signature Grips

Link It Up Rack with 2x Ski Bracket Kit

QP Bag

e Tuzlak histler, BC Pehota

Photo: Shane Roy

Bottom Photos: Anatole Tuzlak


DIRECT TUNNEL MOUNTS

Metal Snowboard Rack System (DTM) This snowboard rack carries a snowboard securely on the side of most snowmobiles. Another bracket system can be used on the other side of the snowmobile.

Boardski Bracket System (DTM) The Boardski Bracket System bolts directly to the side of 2008-16 SkiDoo snowmobiles. Using this bracket allows you to to carry a snowboard or a pair of skis and poles securely on your snowmobile. Another bracket system can be used on the other side of the snowmobile.

SHOP @

CHEETAHFACTORYRACIN

-Black Part No. M01-B -Red Part No. M01-R

-Black Part No. M03-B -Red Part No. M03-R

G.COM

Photos: Leyland

@cheetah_snow

28

cheetahfactoryracing.com


BRACKET KITS The quest to get your gear to wherever you need on your snowmobile has always been our goal since we started over 20 years ago. It brings us a huge amount of satisfaction when we think about the countless powder turns and hi fives that we and our customers have had using our bracket kits and systems. Get whatever powder weapon you have to the top worry-free and have a blast on the way up and down.

Powsurf Bracket Kit We worked with Grassroots founder Jeremy Jenson to design this bracket kit to carry his revolutionary pow surfers. The CFR Pow Surf Bracket Kit carries one Pow Surfer on the side of one of our Tunnel Racks (sold separately). Another Bracket Kit can be purchased for the other side.

-Black Part No. K05-B -Red Part No. K05-R

Snowboard Bracket Kit The CFR Snowboard Bracket kit carries one snowboard on the side of one of our Tunnel Racks (sold separately). Another Bracket Kit can be purchased for the other side.

-Black Part No. K01-B -Red Part No. K01-R

Board/Ski Bracket Kit Like it both ways? The CFR Boardski Bracket Kit carries one snowboard or one pair of skis and poles, on one side of our Tunnel Racks (sold separately). Another Bracket Kit can be purchased for the other side. Tunnel Armor included. Tunnel Armor included.

-Black Part No. K04-B -Red Part No. K04-R

Dual Ski Bracket Kit The CFR Dual Ski Bracket Kit carries a pair of skis and poles on the side of one of our tunnel racks (sold separately). Another Bracket Kit can be used on the other side.

Tunnel Armor included.

-Black Part No. K02-B -Red Part No. K02-R

Photos: Cedric

cheetahfactoryracing.com

29

@cheetah_snow


BAG DIVISION Beefy #10 YKK waterproof zippers are now standard on both the Dime and QP bag’s outside zipper. The new zipper will tractor its way through ice and grime to allow you to get your gear in and out whenever you want.

Dime Bag

Part No. B01

The CFR Dime Bag has Velcro strips that wrap around all of our tunnel rack’s tubular bars to keep the bag locked in place. The waterproof zipper on the outside will keep your contents dry. The inside waterproof pocket is perfect for your wallet and the key hook keeps your keys in the right place. *The new #10 YKK zipper on the top is long lasting, can be opened and closed in the most demanding situations and keeps your gear dry.* Dime Bag Features:

• New #10 YKK long lasting zippers on the top zipper • 10 liters of waterproof carrying capacity. • 3 layer laminate construction with waterproof zippers. • Designed specifically to be used in all CFR Tunnel racks. • Inside pocket for holding wallet and other valuables. • Attached key hook keeps keys in a safe place. • CFR snow/Ice scraper included.

QP Bag

Part No. B02

The CFR QP Bag uses Cordura straps with Fastext clips to fasten the bag to any of our tunnel racks. This method of attachment allows the bag to be easily fastened or removed from your rack. The 25 liters of waterproof carrying capacity can be doubled by unzipping the extension to carry up to 50 liters of gear. *The new #10 YKK zipper on the top is long lasting, can be opened and closed in the most demanding situations and keeps your gear dry.* Features: • New #10 YKK zipper pulls with waterproof sliders are stronger and will last longer than previous zippers. • Bag material is made from waterproof and tear resistant cordura fabric. • 25 liters of carrying capacity. Un-Zip extension and up to 50 liters of carrying capacity is available. • Easily fastened and removed from all CFR Tunnel racks. • Shovel holder on top for carrying an extra shovel on the deep days. • Convenient carrying handle. • Individual inside pocket.

@cheetah_snow

30

cheetahfactoryracing.com


Photos: Shane Roy

Ladder Strap

Replacement Strap - 16” Strap— Part No. 1002 - 8” Strap— Part No. 1001

Part No. 1003

The CFR 220mm Ladder Strap is injection molded from super strong nylon. This replacement strap works on all of our snowboard and ski brackets.

The CFR 8” and 16” straps are injection molded with super strong nylon. These straps will replace any strap used in our snowboard and ski racks.

Aluminium Ratchets

Part No. 1006

The CFR Aluminum Ratchet is built specifically to take the abuse snowmobiling throws at it. These custom made ratchets are designed to hold your snowboard or skis down solid until you need them no matter what! The powder-coated black finish will keep them rust free and looking good. Thicker springs are long lasting and will give you years of trouble free use. -This ratchet will replace all CFR ratchets current and past.

Stickers: 12 Pack The CFR sticker pack comes with an assortment of different sizes and colors of high quality stickers.

Part No. ST01

Package contents: • 4 CFR Classic Skull stickers • 3 CFR OG Die Cuts • 2 CFR MTN Saw Die Cuts • 2 Goat Skull Die Cuts • 1 CFR BC Logo Die Cut

Part No. ST02

Large Stickers Large 9” X 8” XL Die Cut Decals Choose between: • -Skull Logo (White) • -Skull Logo (Red) • -Skull Logo (Black) • -BC Logo (White) • -BC Logo (Red) cheetahfactoryracing.com

31

@cheetah_snow


Are Electric Snowmobiles the Future?

Sound of

Silenzzz...

Words/Photos By @TGFG

‘How was it?’ That was the most common question in my DM feed after I had posted that I got to test ride the new @Taigamotors Ekko electric snowmobile. What surprised me most was how many people reached out. Clearly there was genuine interest in this new product and people were curious if the game has changed. My most common answer was that it was a totally bizarre feeling to ride. The biggest difference being that there was no engine noise to guide you in terms of where your rpms are at. Yes, it makes noise when you’re rolling, but as soon as you stop, silence. It’s a completely different experience to have a silent machine provide instant torque when you push the throttle. You have to unlearn everything you’ve known about finding the sweet spot of the power band. Normally, if attempting a quick turn around from motionless, you’ll hear your machine talk to you as you feather the throttle so you know when the power will kick in. With the Ekko, the power is just there, instantly; there’s no noise to announce the pending torque. It’s an experience that takes getting used to. Technically the sled rides like a hybrid. It’s part Doo, part Cat, and maybe a bit of Yamaha. It feels a bit heavier than my Polaris but nothing you couldn’t get used to. The running boards felt massive, but it rides like a real mountain sled. There’s no less power available. It’s just the delivery that is so different. Would I get one? Probably not, yet. For me, the battery endurance is the issue. The Ekko is just not going to be able to keep power all day, far away from any hope of recharging. A combustion sled can pack extra gas and I often do; coming home in the dark is regular thing for me. An E -sled needs to recharge for up 10 hours. For that reason, the Ekko is not a good fit for an advanced, backcountry rider, who wants to explore far away places, for long periods of time. @cheetah_snow

32

cheetahfactoryracing.com


Kenworthy

Kenworthy

But that doesn’t mean there isn’t a market. A sledder that doesn’t need to roam as far, may find this to be a pretty neat addition to their fleet. A ski tourer, who wants a sled for access might find the Taiga Ekko to be the one. A farm family who can easily plug their machine in before its next whirl around a field could fit this machine well. A guy who loves to talk shop at the hut will have countless conversations starters. And then there is clearly a benefit for commercial operations who are striving for carbon neutrality. The Ekko makes a lot of sense for them. There’s those who will want this to be the future; those who believe that EV’s are the change we need and those who are willing to adjust their habits and activities just so that they can be apart of the innovation that leads us off fossil fuels. For these people, the Ekko offers hope that they can finally get in to the mountains and participate without feeling guilty. Is electric the future? It sure seems like there’s a big push in that direction. I think the most interesting part about riding the Taiga was just the fact that I was even contemplating the future. Here on a beautiful evening, high above Revelstoke as the sun set gold around us, I looked out amongst the peaks and genuinely thought about the future of this world. How could you not want moments like this to be available for future generations? I question when my son is my age, will he come to the same spot and get the same feeling of profound fullness that a calm sunset in the mountains can bring? And what kind of vehicle will bring him there? It seems likely it won’t be a gas powered one… (Check out www.Taigamotors.ca) cheetahfactoryracing.com

33

@cheetah_snow


SPARE PARTS Super Strap Large 22” Part No. 1013.5 Small 15” Part No. 1013 The CFR Super Strap is a must have for your set up. This handy strap allows you to fasten pretty much anything to your rack or back pack. With a super strap and duct tape you can pretty much get through anything.

Tunnel Armor Part No. 1014 The CFR Tunnel armor is designed to prevent ski tips from rubbing against the side of your snowmobile tunnel. The 3M backing will stick to pretty much anything and the hard durometer ribbed rubber top is strong and long lasting. The Tunnel Armor comes stock with the Boardski Bracket and Dual Ski Bracket Kit.

Snow Scraper Part No. 1012 The CFR Snow Scraper is a must have multi-tool. From clearing the snow and ice off of your running boards to scraping the snow and ice off of your snowboard or ski base. The CFR Ice Scraper is available to buy separately or comes in all Dime and QP Bags.

SHOP @

CHEETAHFACTORYRACIN

G.COM

Photo: Dave Craig

@cheetah_snow

34

cheetahfactoryracing.com


WEARABLES

ALL

NEW!

Balaclava

These stretchy and comfortable balaclavas are tight fitting and good for helmet use. The deep collar keeps the powder out and the warmth in. 86% polyester and 14% spandex.

Beanies

Stay warm and look cool with our tight-knit roll up toques. Made from 100% soft acrylic.

Classic Snap Back Hats

3D foam embroidery give these awesome snapback hats a premium look and feel.

Foam Trucker Hats

Our tried and true foam trucker hats are perhaps the most comfortable hat on the planet! You can’t go wrong with this constant performer because the fit and price are smokin! cheetahfactoryracing.com

35

@cheetah_snow


WEARABLES

Raven T

Tees A fresh batch of CFR T-shirts is just what you need to keep things looking good. We pick out the most comfortable and durable Gilden shirts we can find.

Halen T

Pow Tour T

Bear T

Race T

Bear T

Women’s Pow Tour T

@cheetah_snow

36

cheetahfactoryracing.com


WEARABLES

Photo:Billy Stevens Rider: Julie Ann Chapman

@sheshredsmountainadventures

Crew Neck

Hoodies Treeline Hoodie

SHOP @

CHEETAHFACTORYRACING

.COM

Treeline Hoodie

Black

Green

Crew Neck Logo Grey/Blue

Logo Full Zip Hoodie

Logo Full Zip Hoodie

Camo

cheetahfactoryracing.com

Black

37

@cheetah_snow


ZAC OH

PHOTO Instagram: @Zac_OH! Website: ZacOhPhoto.com Homebase: Revelstoke, originally from Montreal Age: 35 You have 1 week. You get to bring 1 rider and you can only take 1 camera and 1 lens. Where do you go. Who do you take? What do you do? I take the bestie Jon Jean, bring my Sony A1 and I’ll take my 70-200 f2.8 and make it work. We’ll hit up Revelstoke cause we both live there and it’s the mecca. We’ll do all the mountains and the jump spots. Is it blue bird and neck deep? Can we pretend it is? Yes it is. Other Sled Photogs you admire? Shane Roy, Allan Sawchuk, Whats for Lunch? Actually my go to up a mountain is a peanut butter/jelly/banana wrap.

@cheetah_snow

Rider: Liam Dhillon Location: Revelstoke, BC

38

Rider: Jean Jean cheetahfactoryracing.com

Location: Revelstoke, BC


TAILGATE

Rider: Liam Hillon Location: Revelstoke, BC

cheetahfactoryracing.com

Rider: Liam Dhillon Location: Revelstoke, BC

39

Rider: Brett Turcotte Location: Clearwater, BC

@cheetah_snow


Those people who tell you not to take chances They are all missing on what life’s about You only live once, so take hold of the chance Don’t end up like others, the same song and dance. Motorbreath, it’s how I live my life I can’t take it any other way. Motorbreath, the sign of living fast It is going to take your breath away.

-James Hetfield

PO Box 93 Pemberton, BC V0N2L1 Canada 1300 Boblett St Unit A 3584 Blaine WA 98230 United States

604-894-1880

dave@cheetahfactoryracing.com

SHOP @

HFACTORYRACING.COM CHEETA@cheetah_snow

40

Photo: TGFG

cheetahfactoryracing.com


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.