B RO - SURE
Photo: Tim Grey. Rider: Brett Turcotte
2020
C HE E TA H FACTO RY R ACI NG
PA SSIO N IS WHAT DRIVES US The passion for playing in the winter is strong with us. Our goal is to design products that help extend and improve the quality of those experiences and make them more convenient. We are obsessed with refinement and improvement and continually go over our products based on feedback to make them better and better. When we see a problem or a need we begin developing a solution to solve it. The process never ends for us and with all of the great feedback from our customers and team of athletes we feel like this years line up is the best we’ve ever had.
Handle Bars 4
Handlebar Accessories 12
Tunnel Racks
18
Direct Tunnel Mounts
Bracket Kits
Bags
Spare Parts
24
Soft Goods
21
22
Photo: Tim Grey. Rider: Graham Agassiz
2
20
27
cheetahfactoryracing.com
cheetahfactoryracing.com
3
HANDLEBARS
The Boondocker 2.0 is bent as an all-around boondock, hill climbing, jump and tandeming handlebar. The 38° degree angulation on the end of the bars keep your hands from slipping off. The 10° degree forward bend is more comfortable for the wrists when your hands are on the handlebar ends.
-Flat Black
Part No. CD1.5
-Ghost White
Part No. CD3.5
-Hot Pink
Part No. CD12
-Blood Red
Part No. CD3.6
-Baby Blue
Part No. CD3.8
-Fluro Orange -Fluro Orange
Part Part No. No. CD3.7 CD3.7
-Green
Part No. CD3.9
-Purple
Part No. CD3.4
-Raw
Part No. CD3.3
Photo: TGFG
4
cheetahfactoryracing.com
HANDLEBARS
The evolution of the Turcotte handlebar is upon us now in its 5th season. Brett’s riding style is constantly evolving (along with his X games medals) and because of this his handle bar needs to as well. When Brett switched over to Polaris last year he needed a new handlebar to work with the different dynamics of his new whip. We went to the drawing board and lowered the rise to 1” because of the higher steering post design on the Polaris and narrowed the handlebar to 30” wide to Brett’s liking.
- Black
Part No. CD13.7
- White
Part No. CD13.8
-Red
Part No. CD13.6
-Gold
Part No. CD13.9
-Purple
Part No. CD13.11
-Raw
Part No. CD13.10
“Switching over to Polaris last year required some changes to my signature bar. We started from scratch and changed the width to work better with the already easy to tip chassis. By dropping the height from 2” to 1” i can run a smaller riser and have a better feel of whats going on underneath me. Very excited on the end result and the upcoming winter” - Brett Turcotte Photo: TGFG
cheetahfactoryracing.com
5
HANDLEBARS
The Crowbar is a non-oversized, 7/8� diameter snowmobile handlebar, from end to end. No different riser or adapter needed to run these on your stock setup. The 7075 aircraft aluminum helps to keep them straight when things go sideways. The Crowbar bend works for hill climbing, boondocking, ditch banging, water crossing, and most any other situations you get into when snowmobiling.
-Flat Black
Part No. CD15
-Banana Yellow
Part No. CD15.2
-Orange Crush
Part No. CD15.3
-White
Part No. CD15.1
-Raw
Part No. CD15.4
Photo: TGFG Rider: Aaron Bernasconi
6
cheetahfactoryracing.com
HANDLEBARS
Chris Brown is one of the best all-around snowmobilers in the business. We are beyond stoked to work with Chris to develop this Polaris specific handlebar. No adapter needed, you can throw these 7/8” bars on your stock Polaris clamp! Along with its bombproof 7075 aircraft aluminum, the 28.5” width, 6 degree bend, 11 degree pullback, and 5” rise make the Chris Brown Signature Bar super smooth and comfortable to use.
-Flat Black
Part No. CD40
-Blood Red
Part No. CD40.2
-Ghost White
Part No. CD40.1
“I wanted a bar that is designed for technical riding but strong enough to take anything I throw at it.”
Photo: TGFG
cheetahfactoryracing.com
7
HANDLEBARS
The SX Bar is CFR’s first snowbike specific handlebar. Made from 7075 heat treated super aluminum with flex technology. Strong, light weight and built to last! Better positioning than stock bars and way stronger! The new design dissipates bumpy conditions better than stock bars while keeping you fresh and riding longer! Vertical and horizontal positioning graphics for perfect centering and pull back angulation. Custom graphics in five color ways. Flat Black, Banana Yellow, Orange Crush, or Blue Bird. The SX bar is an oversized 1 1/8” in the center. A 7/8” to 1 1/8” adapter might be needed depending on the snowbike riser you have.
-Flat Black
Part No. CD41
-Banana Yellow
Part No. CD41.2
-Orange Crush
Part No. CD41.3
-Blue Bird
Part No. CD41.4
-Raw
Part No. CD41.5
Photo: Tim Grey. Rider: Holden Largay
8
cheetahfactoryracing.com
HANDLEBARS
Andrew had been cutting down his Boondockers to a 29” width and asked if we could make him a custom bar so he didn’t have to cut his bar down. We went to the drawing board and designed the all new Munster Bar. We wanted everyone riding all different brands to be able to use this handlebar so we dropped the height to 1” witch allows the clamping space to be wide enough to work with all brands and still gives enough room on the handlebars for all of your controls. A great all around riding handlebar with less width for a more responsive powerful feeling in tight situations. The narrow width allows the snowmobile to be thrown around easier for riders with a narrower shoulder width or riders who prefer a narrower handlebar. This bar won’t be for everyone but for the right person it will be the cats ass!
-Pink
Part No. CD99.2
-Black
Part No. CD99
-Raw
Part No. CD99.1
“I am super excited to release the new Munster bend from Cheetah Factory Racing. The new 1” rise and 29” width is the perfect rise and width to get in out out of tricky situations and still be stable on big airs and drops. The width allows a closer reach to the opposing side of the handlebar making it easier to transfer weight and lean the sled over making it go where i want to go. We have been playing around with different configurations of bends and i am beyond stoked to be riding this handlebar next season on my new sled.” - Andrew Munster Photo: TGFG
cheetahfactoryracing.com
9
g.
BRETT TURCOTTE Photo: Tim Grey. Rider: Brett Turcotte
10
cheetahfactoryracing.com
I NNOVATION IS OUR STANDARD
Things change, and innovation leads the way. We make products that track with the leading edge of progression.
cheetahfactoryracing.com
11
HANDLEBAR ACCESSORIES Black
Knucks Risers 1.25” RISER New!
2” RISER
BLACK- CD60 BLUE- CD60.1 GOLD- CD60.2 PURPLE-CD60.3
5” RISER
BLACK-CD29 BLUE- CD29.5 GOLD-CD29.1 PURPLE-CD29.2
BLACK- CD08 BLUE- CD08.5 GOLD- CD08.1 PURPLE-CD08.2
6” RISER
BLACK- CD09 BLUE- CD09.5 GOLD- CD09.1 PURPLE-CD09.2
3” RISER
BLACK-CD28 BLUE-CD28.5 GOLD-CD28.6 PURPLE CD28.7
7” RISER
BLACK- CD10 BLUE- CD10.5 GOLD- CD10.1 PURPLE-CD10.2
Blue
4” RISER
BLACK- CD07 BLUE- CD07.5 GOLD- CD07.1 PURPLE-CD07.2
8” RISER
BLACK- CD11 BLUE- CD11.5 GOLD- CD11.1 PURPLE-CD11.2
- CNC machined from high strength 6061 - T06 aluminum. - Graphics are laser etched for a durable long lasting look. - Anodized black, blue, gold and purple finish. - Available in 1.25”, 2”, 3”, 4”, 5”, 6”, 7” and 8” inch heights. - Will work with either 1-1/8” tapered bar or 7/8” bar (adapter included). - Patent pending 7/8” anti slip insert keeps bars where you want them. - Designed specifically to be used with our entire handlebar line up and all stock and other after market handlebars as well. - Made in Whistler, BC Canada.
Gold
Purple
Grips CFR snowmobile grips are injection molded with super tacky rubber. The ultra thin diameter rubber compound will fit over your handlebar heater elements, and give you optimum handlebar feel and response. Features: • Standard grips are 6 3/4” long. • Nice diamond grip surface. • Compatible with hand warmers. • Fits over tapered and steel handlebar hooks. • Sold per pair.
GRIPS (6 3/4”) BLACK RED ORANGE YELLOW GREEN GHOST WHITE HOT PINK PURPLE BLUE
CD20 CD21 CD22 CD23 CD24 CD26 CD27 CD 20.2 CD 20.5
Polaris GRIPS (5 1/8”) BLACK
CD20.1
12
cheetahfactoryracing.com
HANDLEBARS ACCESSORIES Curved Bar Ends Part No. CD18
Hand Warmers
Straight Bar Ends Part No. CD18.1 New!
Universal high powered grip heaters that work on all snowmobiles.
Mountain Strap Bendable The CFR bendable Mountain Strap works great to get out of sticky situations and for tandem snowmobiling. The soft compound allows for a greater mobility of strap. New pre-bent mounting brackets, with stainless hardware, wrap securely on the handlebar to prevent slippage.
Part No. CD16
Polaris Mountain Strap The Fabcraft Polaris Mountain strap is designed to be attached to the Chris Brown Handlebar. The Mountain strap is made from an extremely elastic compound with threaded bolts built into the ends. All hardware is included to attach to the crossbar of the Chris Brown Handlebar.
Part No. CD16.1
Ridgid Mountain Strap Part No. CD16.5 The CFR Rigid Mountain Strap is made for sledders wanting a solid grabbing point on their snowmobile handlebars. The rigid strap fastens to most handlebars using the CFR bar nuts. The bar nut mount fastens to the bars tightly not allowing slippage.
cheetahfactoryracing.com
13
Bar Nuts
Part No. CD50
CFR Bar Nuts allow you to mount your Ski-Doo grab strap to any handlebar. Two forged aluminum brackets connect to your handlebar for a solid connection, without slippage. (The strap is not included).
S E RV ICE IS OUR MANTRA
We’re a small company and we want our customers to be stoked. Got a question or concern? Give us a call we’ll be happy to sort it out. 1-877-894-1880
Photo: Tim Grey. Rider: Andreas Bergmark.
HANDLEBARS ACCESSORIES
Oversize Bar Adaptor Allows 7/8” risers to accommodate oversize 1 1/8” handlebars.
Gold CD17.1
Flat Black CD17
Blue CD17.5
Purple CD17.2
Bar Pad The CFR bar pads are designed to fit all CFR handlebars or any oversized large diameter handlebars. The dual density foam will protect against sharp corners and hardware on riser. The Cordura material with CFR logos is long lasting and can withstand cold temps and all of the abuse that comes with snowmobiling.
Baby Blue
Ghost White
Monster Green Part No. CD30
Part No. CD30.4
Blood Red
Blacked Out
Part No. CD30.2
New!
Hot Pink
Part No. CD30.8 Part No. CD30.1
Purple
New!
Part No. CD30.3
Orange
New!
Polaris Pad Part No. CD30.7
Part No. CD30.5
cheetahfactoryracing.com
Part No. CD30.6
15
T EAMWOR K MAKES THE DREAM WORK
The best in the biz create and test our stuff. Andreas Bergmark (Sled), Andrew Munster (Sled), Brett Turcotte (Sled), Caleb Kesterke (Sled), Charles Reid (Snowboard), Chris Brown (Sled),
Denver Debes (Sled), Duncan Lee (Sled, Photo) John Jackson (Snowboard), Jon Jean (Sled), Josh Penner (Sled), Julie-Ann Chapman (Sled), Kalle “KJ” Johansson (Sled), Khan Yong Gee (Sled) , Kye Peterson (Ski), Maria Sandberg (Sled), Mark Abma (Ski), Mikey Rencz (Snowboard), Nadine Overwater (Sled), Parker White (Ski) , Riley Suhan (Sled), Seth Morrison (Ski)Travis Rice (Snowboard) , Wiley Miller (Ski)
16
cheetahfactoryracing.com
Photo: Tim Grey.
Chris Logan (Ski) , Cody Borchers (Sled), Cody Hunt (Sled), Cody Mcnolty (Sled), Cody Townsend (Ski), Cory Davis (Sled), Cory Derpak (SX),
HANDLEBARS ACCESSORIES
Tube Adaptor
Part No. CD19
5-1/2” tube converts stock flat style steering post to a pivot style steering post when using a pivoting style handlebar riser. • Super strong Chromoly Steel. • Attaches to stock handlebar clamps or any 7/8” handlebar attachment. • Positions pivoting style risers on outside of stock handlebar clamps.
Arctic Cat Adjustable Post Delete Kit
Part No. CD25
This kit allows you to use your stock steering post and removes the height adjustable feature off your Arctic Cat snowmobile. Simply cut below the adjustable part of your steering post and install the new T style billet block (step by step directions included). You will also need to get a riser (height of your choice). Eliminates 90% of the slop found in the stock adjustable post and saves over 1lb, depending on the height of risers you choose.
The Cluster Relocate - Ski Doo Gen4— Part No. CD28 - Ski Doo XM— Part No. CD28.1 - Knucks Riser— Part No. CD28.3 CD28
Clean up your handlebar controls and move them out of the way with this easily installed relocator.
CD28.3
cheetahfactoryracing.com
CD28.3
CD28
CD28.1
17
TUNNEL RACKS The base of the CFR Tunnel racks start with two Aluminum plates stamped out to a .01 spec. The plates are then placed into a welding jig. Tubular aluminum is then cut to length and holes are drilled into the tubing for the brackets. The two main bars are then placed in a bending tool and bent to attach to the mounting plate and placed in the welding jig with the plates. The cross tubes are then cut to the correct width and placed in the jig as well. Everything is then carefully hand welded into one. This process creates the strongest rack on the market that won’t fall apart or rattle loose. It can take a licking and keeps on ticking. The Tunnel racks are the base of your fun carrying platform. Our bracket kits are specifically designed to carry skis, snowboards and pow surfers on the racks. Put one on each side to carry whatever you might need. The inside space between the brackets allows our custom QP and dime bags to fit inside along with extra gas and or gear ect…
LINK IT UP RACK
- Flat Black Part No. TRO7 -Ghost White Part No. TRO7.5 The CFR Link It Up Rack allows you to put on or take off your snowmobile rack quickly and easily using the Ski Doo LinQ Fasteners. All CFR brackets kits and bags are compatible with the Link It Up rack. *You will be required to purchase LinQ Cargo Base kits X 4 and LinQ fasteners X 4 and are not included* LinQ Cargo Base kits- Part No. TR7.1 *Ski-Doo LinQ Fasteners are not included.
LinQ Cargo Base Kit Part No. TR7.1
These 4 Cargo Base Kits are designed to be installed using the 8 factory holes on the rear tunnel of Ski-Doo snowmobiles (all hardware included). When used with the Linq fasteners it allows tool-less installation or removal of the Link-It-Up Rack. *Ski-Doo LinQ Brackets are not included.* Includes: • 4 Ski-Doo Cargo Base Kits. • All hardware to attach Cargo Base Kits to snowmobile tunnel.
LinQ Fastener Part No. TR7.2
These 4 Ski-Doo LinQ cargo fasteners are designed to be attached to the CFR Link-It-Up Rack (all hardware included). When installed and used with the LinQ Cargo Base Kit, it allows tool-less installation or removal of the Link-It-Up Rack. Includes: • 4 Ski-Doo Cargo LinQ Fasteners. • All hardware to attach fasteners to the CFR Link-It-Up rack.
LOGAN PEHOTA
Photos Tim Grey
18
cheetahfactoryracing.com
TUNNEL RACKS
Mountain Rack - Flat Black - Ghost White - Orange Crush - Monster Green
Part No. TRO4 Part No. TRO4.1 Part No. TRO4.3 Part No. TRO4.2
The CFR Mountain Rack lets you carry extra gear/gas on the back of your snowmobile. The lightweight, low profile design of the Mountain Rack is very strong and built to last. Snowboards, powsurfers, and ski brackets can still be used on each side of the rack.
The CFR Connect System does not work with the Mountain rack.
Expedition Rack - Flat Black Part No. TRO5
The CFR Expedition Rack is ready for most anything. You can carry twice the amount of gear on those big days or overnight trips. Snowboards, powsurfers, and ski brackets can still be mounted on each side of the rack as well. (Requires a 153� tunnel or longer). The CFR QP bag and dime bag also fit great in the Expedition rack.
iRack 2.0
- Flat Black Part No. TRO6 - Ghost White Part No. TRO6.5 The iRack 2.0 is the hybrid rack of the Mountain and iRack. Its bigger carrying capacity allows you to carry more gear as well as any two Bracket Kits (sold separately). The Bracket mounting holes are farther apart on this rack, securing skis and snowboards better than ever. The iRack2.0’s lower profile keeps skis and or snowboards lower and closer to the snowmobile. The lightweight, yet strong design is almost bombproof.
Blades Add a little more metal to the rear tunnel of your snowmobile. The CFR XP/XM/ Gen 4 Blades are designed to be fastened to the outside or inside rear tunnel of your Ski-Doo snowmobile. Blades add 50% more strength to the rear tunnel. The XP/XM/Gen 4 Blades are recommended if you travel on bumpy roads carrying lots of extra weight on the rear tunnel of your snowmobile. Blades also available for Arctic Cat M series 2005-2008 and Yamaha Nytros as well. Features: -Anatomically designed to fit the rear tunnel -Blades all come in anodized black. -Comes with 1 right/1 left side and stainless steel rivets. -Made in Canada. cheetahfactoryracing.com
SKI DOO REV GEN 4
-Anodized Black Skidoo XP, XM
NEW!
-165 ..........................Part no. TS08 -154 ......................... Part no. TS08.5 -175 ..........................Part no. TS08.6
19
-146............................................. Part no. TS01 -154............................................. Part no. TS02 -163............................................. Part no. TS03 -174.............................................. Part no. TS07 Yamaha Nytro.......................... Part no. TS04 Arctic Cat M-Series............ Part no. TS06
DIRECT TUNNEL MOUNTS
Metal Snowboard Rack System (DTM) This snowboard rack carries a snowboard securely on the side of most snowmobiles. Another bracket system can be used on the other side of the snowmobile.
Boardski Bracket System (DTM)
-Black Part No. M03-B -Red Part No. M03-R
The Boardski Bracket System bolts directly to the side of 2008-16 SkiDoo snowmobiles. Using this bracket allows you to to carry a snowboard or a pair of skis and poles securely on your snowmobile. Another bracket system can be used on the other side of the snowmobile.
Photo Ryan P. Rider Justin Kious.
-Black Part No. M01-B -Red Part No. M01-R
Photo Dave B. Rider Chris Ankeny.
20
cheetahfactoryracing.com
BRACKET KITS The quest to get your gear to wherever you need on your snowmobile has always been our goal since we started over 20 years ago. It brings us a huge amount of satisfaction when we think about the countless powder turns and hi fives that we and our customers have had using our bracket kits and systems. Get whatever powder weapon you have to the top worry-free and have a blast on the way up and down.
Powsurf Bracket Kit We worked with Grassroots founder Jeremy Jenson to design this bracket kit to carry his revolutionary pow surfers. The CFR Pow Surf Bracket Kit carries one Pow Surfer on the side of one of our Tunnel Racks (sold separately). Another Bracket Kit can be purchased for the other side.
-Black Part No. K05-B -Red Part No. K05-R
Snowboard Bracket Kit The CFR Snowboard Bracket kit carries one snowboard on the side of one of our Tunnel Racks (sold separately). Another Bracket Kit can be purchased for the other side.
-Black Part No. K01-B -Red Part No. K01-R
Board/Ski Bracket Kit Like it both ways? The CFR Boardski Bracket Kit carries one snowboard or one pair of skis and poles, on one side of our Tunnel Racks (sold separately). Another Bracket Kit can be purchased for the other side. Tunnel Armor included. Tunnel Armor included.
-Black Part No. K04-B -Red Part No. K04-R
Dual Ski Bracket Kit The CFR Dual Ski Bracket Kit carries a pair of skis and poles on the side of one of our tunnel racks (sold separately). Another Bracket Kit can be used on the other side.
Tunnel Armor included.
-Black Part No. K02-B -Red Part No. K02-R
Photo Jeff C.
cheetahfactoryracing.com
21
BAG DIVISION Beefy #10 YKK waterproof zippers are now standard on both the Dime and QP bag’s outside zipper. The new zipper will tractor its way through ice and grime to allow you to get your gear in and out whenever you want.
Dime Bag
Part No. B01
The CFR Dime Bag has Velcro strips that wrap around all of our tunnel rack’s tubular bars to keep the bag locked in place. The waterproof zipper on the outside will keep your contents dry. The inside waterproof pocket is perfect for your wallet and the key hook keeps your keys in the right place. *The new #10 YKK zipper on the top is long lasting, can be opened and closed in the most demanding situations and keeps your gear dry.* Dime Bag Features:
• New #10 YKK Long Lasting Zippers on the top zipper • 10 liters of waterproof carrying capacity. • 3 layer laminate construction with waterproof zippers. • Designed specifically to be used in all CFR Tunnel racks. • Inside pocket for holding wallet and other valuables. • Attached key hook keeps keys in a safe place. • CFR snow/Ice scraper included.
QP Bag
Part No. B02
The CFR QP bag uses cordora straps with fastext clips to fasten the bag to any of our tunnel racks. This method of attachment allows the bag to be easily fastened or removed from your rack. The 25 Liters of waterproof carrying capacity can be doubled by unzipping the extension to carry up to 50 Liters of gear. *The new #10 YKK zipper on the top is long lasting, can be opened and closed in the most demanding situations and keeps your gear dry.* Features: • New #10 YKK zipper pulls with waterproof sliders are stronger and will last longer than previous zippers. • Bag material is made from waterproof and tear resistant cordura fabric. • 25 Liters of carrying capacity. Un-Zip extension and up to 50 liters of carrying capacity is available. • Easily fastened and removed from all CFR Tunnel racks. • Shovel holder on top for carrying an extra shovel on the deep days. • Convenient carrying handle. • Individual inside pocket.
22
cheetahfactoryracing.com
Q UALITY
CFR products are designed to be strong, durable and lightweight. We test our products in the harshest settings to make sure they are suffiencient in any circumstance. When you see the CFR logo you can count on the fact that we have put our stamp of approval on it. cheetahfactoryracing.com
23
Photo: Tim Grey. Rider: Jamie Iwaschuk
IS WHAT WE’RE KNOWN FOR
SPARE PARTS
Ladder Strap The CFR 220mm ladder strap is injection molded from super strong nylon. This replacement strap works on all of our snowboard and ski brackets.
Part No. 1003
Replacement Strap - 16” Strap— Part No. 1002 - 8” Strap— Part No. 1001 The CFR 8” and 16” straps are injection molded with super strong nylon. These straps will replace any strap used in our snowboard and ski racks.
Aluminium Ratchets
Part No. 1006
The CFR Aluminum Ratchet is built specifically to take the abuse snowmobiling throws at it. These custom made ratchets are designed to hold your snowboard or skis down solid until you need them no matter what! The powder-coated black finish will keep them rust free and looking good. Thicker springs are long lasting and will give you years of trouble free use. -This ratchet will replace all CFR ratchets current and past.
Stickers: 12 Pack The CFR sticker pack comes with an assortment of different sizes and colors of high quality stickers.
Part No. ST01
Package contents: • 4 CFR Classic skull stickers • 3 CFR OG Die Cuts • 2 CFR MTN Saw Die Cuts • 2 Goat Skull Die Cuts • 1 CFR BC Logo Die Cut
Large Stickers
Part No. ST02
Large 9” X 8” XL Die Cut Decals Choose between: • -Skull Logo (White) • -Skull Logo (Red) • -Skull Logo (Black) • -BC Logo (White) • -BC Logo (Red)
24
cheetahfactoryracing.com
SPARE PARTS
Super Strap Part No. 1013 The CFR super strap is a must have for your set up. This handy strap allows you to fasten pretty much anything to your rack or back pack. With a super strap and duct tape you can pretty much get through anything.
Tunnel Armor
Part No. 1014
The CFR Tunnel armor is designed to prevent ski tips from rubbing against the side of your snowmobile tunnel. The 3M backing will stick to pretty much anything, and the hard durometer ribbed rubber top is strong and long lasting. The Tunnel Armor comes stock with the Boardski Bracket and Dual Ski Bracket Kit.
Snow Scraper Part No. 1012 The CFR snow scraper is a must have multi-tool. From clearing the snow and ice off of your running boards to scraping the snow and ice off of your snowboard or ski base. The CFR Ice Scraper is available to buy separately or comes in all Dime and QP Bags.
CALEB KESTERKE
Photo: Tim Grey Rider: Caleb Kesterke
cheetahfactoryracing.com
25
HI STORY WE KNOW IT. WE WERE THERE.
SoftGoods 21 years. Time flies when you’re having fun but we feel like we’re just getting started.
Photo: Tim Grey. Riders: Riley Suhan, Kayli Dentman
cheetahfactoryracing.com
SOFT GOODS
Goat Skull
Tee Front
Tee Side
Long Sleeve Front
Long Sleeve Side
Hoodie Side
Hoodie Back
Long Sleeve Back
Goat Skull Foam Trucker Hat
Hoodie Side
Hoodie Back
Mountain Saw
Hoodie Front
Tee Front cheetahfactoryracing.com
Tee Front
Tee Side
Long Sleeve Front 27
Long Sleeve Side
Mountain Saw Foam Trucker Hat
SOFT GOODS
BC Logo
Long Sleeve Front
Long Sleeve Side
Tee Front
Long Sleeve Front
Long Sleeve Side
Tee Front
Tee Side
Tee Front
Tee Side
Tee Front
Tee Side
Tee Side
Mountain Line
Tee Front
Tee Side
Hoodie Front
Hoodie Back
Foam Truck Hat
28
cheetahfactoryracing.com
SOFT GOODS
Kell ‘Em All Series
Tee Front
Tee Side
Long Sleeve
Long Sleeve Side
Hoodie Front
Hoodie Back
Original
Long Sleeve Front
Long Sleeve Side
Tee Front
Tee Side
W Tee Front
W Tee Side
Ladies
W Tee Front
W Tee Side
Foam Trucker Hats
cheetahfactoryracing.com
29
C HA SE LIFE IN LOVING MEMORY OF DAVE TREADWAY
Photos: Tim Grey. Rider: Dave Treadway
30
cheetahfactoryracing.com
In April of 2019 we had to say good bye to our dear friend Dave Treadway, who passed in a mountain accident near Pemberton. Dave and the whole Treadway tribe have been our beloved friends and innovation partners for decades. Dave left a powerful legacy of inspiration in his path. In his memory, we continue to Chase Life and the source of it.
cheetahfactoryracing.com
31
CHEETAH FACTORY RACING PO Box 93 Pemberton, BC V0N2L1 Canada 1300 Boblett St Unit A 3584 Blaine WA 98230 United States
604-894-1880
dave@cheetahfactoryracing.com
Photo: Tim Grey. Rider Caleb Kersteke photo: Blake Jorgenson